Scribd
Upload
142 views1 page

Dimensional Inspection Report

The dimensional inspection report details measurements for angles supplied by Kedia Steels to Lanco Infratech for purchase order 4100116128. The report lists the item descriptions, observed dimensions, and lengths for four angles sizes: 75x75x8 mm, 90x90x8 mm, 110x110x10 mm, and 150x150x10 mm. All dimensions were found to be within specified tolerances according to IS1852 standards and a visual inspection was satisfactory.

Uploaded by

Ml Jain
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as DOCX, PDF, TXT or read online on Scribd
142 views1 page

Dimensional Inspection Report

The dimensional inspection report details measurements for angles supplied by Kedia Steels to Lanco Infratech for purchase order 4100116128. The report lists the item descriptions, observed dimensions, and lengths for four angles sizes: 75x75x8 mm, 90x90x8 mm, 110x110x10 mm, and 150x150x10 mm. All dimensions were found to be within specified tolerances according to IS1852 standards and a visual inspection was satisfactory.

Uploaded by

Ml Jain
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as DOCX, PDF, TXT or read online on Scribd
You are on page 1/ 1

Dimensional Inspection Report

Customer:

M/s Lanco Infratech Limited.

Supplier:

M/s Kedia Steels.

PO Number:

4100116128 Dtd.20.07.2016.

Item Descriptoin
Angle 75X75X8 MM
Angle 90X90X8 MM
Angle 110X110X10 MM
Angle 150X150X10 MM

Observed Dimensions
(75.0-75.7) X (75.2-75.8) X (7.9-8.2) MM
(89.8-91.3) X (90.0-91.8) X (7.9-8.2) MM
(109.8-110.0) X (110.0-110.8) X (10.0-10.3) MM
(148.9-150.0) X (149.0-150.5) X (9.9-10.1) MM

Note:1. Other shape tolarances found satisfactory as per IS1852.


2. Visual - OK

Length
12.020 12.030 Mtrs
12.030 12.040 Mtrs
12.030 12.050 Mtrs
11.600 12.020 Mtrs

You might also like