2016

PERFORMANCE CATALOG
A Complete Line of Quality Performance Engine Products

2016 AUTOMOTIVE PERFORMANCE CATALOG

EDELBROCK FACILITIES
Edelbrock Headquarters

2700 California Street, Torrance, CA USA 90503

Phone: 310-781-2222 Fax: 310-320-1187
Tech Line Only: 800-416-8628
Office hours: 8am-5pm PST, weekdays
Tech Line hours: 7am-5pm PST, weekdays

Russell Performance

Distribution Center & Vics Garage

Aluminum Sand Cast Foundry

Edelbrock Carburetor Division

501 Amapola Avenue Torrance, CA 90501

1320 Buena Vista Street San Jacinto, CA 92583

Aluminum Permanent Mold Foundry

and Heat Treatment Facility

510 Madrid Street Torrance, CA 90501

5715 Clyde Rhyne Drive,

Lee County Industrial Park Sanford, NC 27330

1380 Buena Vista Street San Jacinto, CA 92583

REGISTERED NAMES & TRADEMARKS

94, Accu-Drive, Air-Gap, Classic Series, Cycle Flex, Edelbrock, Edelbrock Design, Edelbrock & Design, Edelbrock Total Power Package, EF USA,
E-Force, Elite Series, E-CNC, E-Series, E-Street, E-Street 2, Endura, EnduraShine, LS-R, Passion For Performance, Performer, Performer IAS,
Performer EPS, Performer X, Performer RPM, Performer Series, ProCharge , ProClassic, Pro-Flo, Pro-Flo XT, Pro-Flo 2, Pro-Flo 3, Pro-Flo Sportsman,
Pro-Port, Pro-Port Raw, Pro-Ram II, Pro-Swivel, Pro-Tuner, Quiet-Flo, QwikData, Qwik Release, R, Rollin Thunder, RPM Air-Gap, RPM Series,
RPM XT, RPM Xtreme, Russell, SDT, Signature Series, Tarantula, The Most Respected Name In Performance, Thunder Series AVS, Ti-Tech, Torker,
Torker II, Tru-Flo, Tube Seal, Tunnel Ram, Victor, Victor Series, Victor X

PRODUCTION CREDITS
Edelbrocks 2016 Catalog was designed, written and produced by the Edelbrock Advertising Agency:
Eric Blakely, Michelle Harris, Dave Davis, Steven Call, Paul Tayyan, Freddy Cano, Eddie Loera

Technical Information from Edelbrock Research & Development:

Rob Simons, Rick Roberts, Curt Hooker, Brent McCarthy, Robert Jung, Smitty Smith, Dave Stinson

Proofreading:

Vic Edelbrock, Smitty Smith, Steve Whipple, Dave Stinson, Curt Hooker, Rick Roberts, Brent McCarthy,
Matt Gamble, Chad Magana, Jon-Eric Gonzales, Mark Honsowetz, Rob Simons

Photography:

Ralph Guldahl, Dave Davis, Steven Call, Eric Blakely, Eddie Loera

www.edelbrock.com
www.edelbrocktv.com www.edelbrockfoundry.com www.russellperformance.com
www.facebook.com/edelbrockperformance www.twitter.com/edelbrockusa
www.instagram.com/Edelbrockusa www.edelblog.com

Edelbrock is an Exclusive
NASCAR Performance Partner

Certain products identified in this catalog as Made in the USA, including aluminum cylinder heads and water pumps, incorporate U.S. and foreign parts.
NASCAR makes no claims as to the quality or performance of the products or services offered by any company 2016 Edelbrock, LLC. All Rights Reserved Printed in the U.S.A.

new products reference guide

Carburetors

Carburetor Dual-Feed Fuel Line Kits.................................................................................................... 23

Bullet Nosed Carb Stub, Nut & Washer Kit ....................................................................................... 26

Intake Manifolds

Small-Block Chevrolet Victor E-Tec EFI .............................................................................................. 42

Cross-Ram LS3 ......................................................................................................................................... 45
Ford Victor II 5.0L ..................................................................................................................................... 71
Holden RPM Air-Gap............................................................................................................................... 74

Gaskets

Jeep 4.0L Inline Six Thermostat Gasket.............................................................................................. 85

Chevy & Chrysler Intake Manifold Gaskets ....................................................................................... 86

Camshafts

Rollin Thunder Chrysler HEMI Big-Block ........................................................................................ 124

Cylinder Heads

Chevrolet Small-Block Victor Jr. 23...............................................................................................93-94

Chevrolet Performer RPM 454-R Marine .......................................................................................97-98
Chevrolet Duramax Diesel V8 ........................................................................................................99-100
Holden VN 5.0L ................................................................................................................................109-110
Pontiac Performer RPM CNC .......................................................................................................109-110

Power Packages

Chrysler HEMI Big-Block Top End Kit ............................................................................................... 132

Supercharger Kits

2011-14 Chrysler 300, Dodge Charger & Challenger ...............................................................137-138

2015 Ford Mustang .........................................................................................................................141-142
2015-16 Chevrolet Corvette ZO6...................................................................................................145-146
2014-16 Chevrolet Truck & SUV .......................................................................................................... 147
2012-15 Scion FR-S, Subaru BRZ & Toyota GT86 ............................................................................ 149
2010-15 Chevrolet Camaro & 2015 Ford Mustang Coil Covers ..................................................... 156

Electronic Fuel Injection Systems

E-Street 2 EFI Systems ......................................................................................................................... 159

E-Street 2 EFI Ignition Control Kits ..................................................................................................... 160
Pro-Flo 3 EFI Systems ........................................................................................................................... 161
Adjustable Universal EFI Sump Fuel Kit ............................................................................................ 162
Pro-Flo 3 Fuel Sensor............................................................................................................................ 170
Pro-Flo 3 Throttle and Trans Kickdown Bracket ............................................................................. 170

Fuel Pumps

Aluminum Street Fuel Filters ............................................................................................................... 206

Sportswear

Mens Edelbrock Script Tee ................................................................................................................. 207

Womens Striped Tank Top ................................................................................................................... 208
Womens Edelbrock Baseball Shirt .................................................................................................... 208
Kids Edelbrock Equipped Tee .............................................................................................................. 209
Kids Vintage Roadster Tee................................................................................................................... 209
Edelbrock Camouflage Tote................................................................................................................. 210

TABLE OF CONTENTS
Carburetors

Performer Series Introduction ...................... 11

Thunder Series AVS Introduction ................ 12
Performer Series ............................................. 13
Thunder Series AVS........................................ 15
Vintage 94 Series ............................................. 16
Vintage 94 Series Accessories ..................... 17
Calibration Kits ................................................. 18
Carb Accessories ............................................ 19
Q-Jet Accessories........................................... 21
Fuel Filters & More.......................................... 22
Fuel Line Kits, Fuel Hose Kits
& Fuel Distribution Blocks ............................. 23
Service Parts & Accessories ........................ 24
Adapters & Spacers ....................................... 25
Install Components.......................................... 26

Intake Manifolds

Manifold Selection .......................................... 28

Manifold Installation Kits ............................... 29
Marine & Nitrous ............................................. 30
AMC & Buick .................................................... 31
Cadillac & Chevrolet Small-Block ................ 32
Chevrolet Small-Block Street & Race ......... 39
Chevrolet LT1 & LT4 Series ........................... 43
Chevrolet LS Series ......................................... 44
Chevrolet W-Series ......................................... 46
Chevrolet Big-Block ........................................ 47
Chevrolet Big-Block Street & Race ................. 50
Chrysler Small-Block ...................................... 55
Chrysler Small-Block Race,
Magnum & HEMI ............................................. 56
Chrysler Big-Block .......................................... 57
Chrysler Big-Block Race & HEMI ................ 59
Ford Flathead .................................................... 60
Ford Small-Block Street & Race .................. 61
Ford Big-Block & Modular............................. 71
Ford Big-Block Race ....................................... 74
Honda, Acura & Oldsmobile .......................... 75
Oldsmobile & Pontiac ..................................... 77
Pontiac Street, Race & Rover ....................... 78
Manifold Installation Items ............................ 79
Manifold Reference Dimensions .................. 81

Gaskets

Introduction, Bulk Pack & Sealants...................83

Carburetor & Manifold Gaskets .................... 84
Front Cover, Water Pump, Supercharger Lid
Gasket & Application Reference Guide ...... 85

Cylinder Heads

Introduction ...................................................... 87
AMC, Jeep, Buick ........................................... 89
Chevrolet Small-Block .................................... 91
Chevrolet LT1 & LT4 ........................................ 93
Chevrolet LS1/LS2/LS3 & Big-Block ........... 95
Chrysler Small-Block .................................... 101
Chrysler Big-Block ........................................ 101
Ford Flathead .................................................. 103
Ford Small-Block ........................................... 103
Ford Big-Block................................................ 107
Holden, Oldsmobile & Pontiac .................... 109
Pro-Port Raw .................................................. 111
Cylinder Head Accessories ......................... 115
Valve Springs & Retainers........................... 117
Flow Data & Valve Spring Info.................... 119

Camshafts

Performer Plus ............................................... 121

Performer RPM, Torker-Plus
& Hydraulic Flat Tappet Lifter Kits ................. 122
Rollin Thunder ............................................... 123

Lifter Kits

Hydraulic Roller Camshaft Kits

& Hydraulic Roller Lifter Kits ....................... 125

Valvetrain & Gear Drives

Lifters, Lifter Installation Kit,

Lubricants & Gear Drives ........................... 126

Timing Chain Sets & Covers

Timing Chain Sets .......................................... 127

Timing Covers ................................................. 128

Power Packages

Performer & E-Street .................................... 129

Performer, E-Street & Performer RPM ..... 130
Power Package Top End Kits...................... 131

Please Note: This catalog does not contain consumer pricing.

To locate a dealer near you who sells Edelbrock products,
go to www.edelbrock.com/locator

TABLE OF CONTENTS
Intake Manifold & Carb Kits

Water Pumps

Supercharger Kits

Accessories

Vintage ............................................................. 133

Single-Quad .................................................... 134
Dual-Quad........................................................ 135
Introduction .................................................... 136
Scion FR-S, Subaru BRZ
& Toyota GT86 ................................................ 137
Chrysler & Dodge HEMI ............................... 138
Dodge Truck ................................................... 140
Ford Trucks & SUVs ...................................... 141
Mustang........................................................... 142
Camaro SS ...................................................... 144
Corvette ........................................................... 146
GM Trucks & SUVs ....................................... 148
Jeep.................................................................. 149
Chevrolet Small-Block Enforcer ................. 150
Chevrolet LS Enforcer................................... 151
Universal LS1/LS2/LS3/LS7 & E-Rod .......... 152
Components & Accessories........................ 153

Electronic Fuel Injection

Introduction .................................................... 157

Comparison Chart .......................................... 158
E-Street 2......................................................... 159
Pro-Flo 3........................................................... 161
Fuel Kits ........................................................... 162
Pro-Flo 2........................................................... 163
Pro-Flo XT........................................................ 164
Throttle Bodies ............................................... 165
Intake Elbows ................................................ 167
EFI Manifolds .................................................. 168
EFI Components ............................................. 169

Crate Engines

Introduction .................................................... 171

E-Street ............................................................ 172
Chevrolet Small-Block .................................. 173
LS3 .................................................................... 177
Chevrolet Big-Block ...................................... 178
Ford Small-Block ........................................... 179
Ford 5.0L........................................................... 180

Introduction .................................................... 181

High-Performance Street............................. 182
Competition ..................................................... 185
Pro-Flo Air Cleaners ...................................... 186
Signature Series Valve Covers ................... 187
Elite Series
Air Cleaners & Valve Covers ....................... 188
Racing Series
Air Cleaners & Valve Covers ....................... 189
Classic Series
Air Cleaners & Valve Covers ....................... 190
Victor Series
Air Cleaners & Valve Covers ....................... 191
Coil Covers ...................................................... 192
Replacement Air Filter Element .................. 192
Pro-Flo Universal Air Filters......................... 193

Nitrous Systems

Pre-Assembled Manifolds ........................... 194

Plate Systems ................................................. 194
Direct Port Systems ...................................... 196
Nitrous Accessories ..................................... 197
Nitrous Adapters ........................................... 201

Fuel Pumps & Regulators

Mechanical ..................................................... 202

Regulators ....................................................... 203
Electric ............................................................. 204
Filters................................................................ 206

Sportswear

Mens Tees & Tanks ...................................... 207

Womens Tees, Tanks & Hoodies ............... 208
Mens Jackets & Hoodies ............................ 208
Kids Tees & Mens Caps ............................... 209
Gifts & Accessories ...................................... 210

Free Catalogs .................................. 211

General Warranty ........................... 212
Index ................................................. 213

WWW.EDELBROCK.COM

RESEARCH & DEVELOPMENT

FROM IDEA...
TO PERFORMANCE
PROVEN PRODUCT
Edelbrock products start with an original thought or idea
that then has to be translated into a working model. Our
R&D staff is not only well qualified at their respective
positions, but theyre also automotive enthusiasts.
Why is being an enthusiast so important? Because
an enthusiast does more than work in the automotive
aftermarket, they live it and its at that point where
understanding the inner workings of a supercharger,
engine or EFI system becomes second nature. They
are constantly thinking of new and innovative ways
of making a product that works better.
To aid them in bringing their passion to life, Edelbrock
engineers have access to the most up-to-date tools
such as the Siemens NX8 design suite, Computational
Fluid Dynamic (CFD) software and the latest in 3D rapid
prototyping. All these technologies combined allow
our engineers to take a product from idea to reality
in a shorter period of time, ensuring the product
performs properly before ever producing a
production part.
The R&D process improves the product while its
being developed, and is a true testament of the
commitment to performance that goes into all
of our products. Whether theyre manifolds,
superchargers, fuel injection systems,
cylinder heads, nitrous systems, or
carburetors, you can rest assured
that the final product was directly
influenced by the passion for
performance that is an
integral part of our Research
and Development team.

TESTING...
When you design and sell the
best-engineered performance products in
the world, you have to have a rigorous testing
program. Why? Without adequate testing,
theres no way to stand behind your product
with confidence. Thats why every product we design
and sell at Edelbrock is tested and approved by
Edelbrock engineers in a real world environment on
state-of-the-art equipment.
Our three SuperFlow computerized engine dynos are
capable of measuring 11 separate engine variables up
to speeds of 15,000 rpm. The SuperFlow Powermark
and SuperFlow SF902 engine dynos are fully automated
and programmable. Equipped with WinDyn software,
it allows us to simulate various driving situations,
and is the very latest in simulation testing equipment.
Our Super Flow model SF-840 eddy-current
chassis dyno also aids us in testing by
allowing us to test in the car under
simulated road conditions and can
handle up to 1,000 hp at the wheels
and speeds of 200 mph.

But for real-world tuning and testing, there is no

substitute for the real thing. Edelbrock's fleet of
test vehicles are driven by Edelbrock engineers and
employees to get a real world feeling for product
improvements as well as product durability.
Our testing doesnt stop there. Professional race
car teams and drivers are also a vital part of our
performance and durability testing. Working with these
talented individuals is just another extension of our
research and development process. So when we say
proven performance we really mean it!
When all testing is completed, the results evaluated,
and the part has passed all performance criteria,
then, and only then, is the product deemed ready
for production. These precise testing procedures are
applied to the entire Edelbrock line for performance
thats guaranteed.

ALUMINUM
CASTING FOUNDRY
In a day and age where we are seeing more products
sent overseas to be manufactured, we at Edelbrock see
value in the quality control of American manufacturing
by American workers and we are proud of our casting and
machining facilities all of which are located right here,
in the USA.
Edelbrocks permanent mold
and sand cast aluminum parts
take shape in two of the most
modern high-tech foundries in
the Western United States.
The Edelbrock Foundries
located in San Jacinto,
California, pride themselves
on their quality and efficiency.
The 185,000-sq/ft. complex is
capable of producing over 3,000
finished castings a day.

PRECISION MACHINING
AND QUALITY CONTROL
Computer-controlled robotic pouring stations ensure
that the molten metal is at the correct temperature and
that the right amount of aluminum is used to ensure
outstanding consistency and quality.
The Permanent mold facility expands Edelbrocks casting
capabilities and manufacturing
of Made in USA products.
This facility has two dedicated
static pour cylinder head
casting machines and three
additional tilt pour casting
machines dedicated to small
parts production.
Ultra-modern heat-treat and
ageing equipment is also a
welcome addition to the new
facility, further adding to
Edelbrocks self-sufficiency,
dedicated manufacturing and
quality control of our products.

Edelbrock's Ultra-modern
The green sand foundry with
heat-treat and ageing equipment
three automated molding
lines, 23 shell core machines,
2 new state-of-the-art cold set core machines, and a
Edelbrock not only casts and finishes its own products
self-contained sand handling system that is capable of
with Made in USA quality, but can and has cast
processing 100 tons of sand per hour, the Edelbrock sand products for numerous automotive, industrial and
foundry produces some of the finest castings around.
agricultural clients.

Edelbrock uses the finest equipment for machining

and quality control. With over 70 CNC machines
and hundreds of dedicated men and women, the
Edelbrock facilities have earned the world recognized
ISO 9001:2008 registration for quality. Edelbrock
manufactures more types of performance products than
any other company and our employees ensure that they
are the finest.
All of Edelbrocks aluminum products, which include
superchargers, cylinder heads, water pumps, manifolds
and throttle bodies, are machined by modern multi-axis
machining centers, like our cylinder head machining cell
that uses three Makino A88 4-Axis machines joined by
an automated pallet loader. These remarkable cells are
capable of machining a cylinder head from start to finish
and have increased production as well as quality.
Our Coordinate Measuring Machines (CMM) in the
Edelbrock Quality Control department check all
machined products ensuring the products meet
strict tolerances.
We are continually reviewing and updating the
equipment in all our manufacturing facilities to ensure
that we remain state-of-the-art. These goals have served
our customers well for over 78 years and will continue
into the future.

DISTRIBUTION CENTER... QUICK AND EFFICIENT

Our Distribution Center (DC) covers 65,000 square feet in Torrance, California. A real-time
inventory system downloads all orders to hand-held scanners for fast and efficient shipping
of orders. With a ceiling of 35 feet, theres enough room for 6 levels of pallet racking packed
full of Edelbrock and Russell performance products ready to be shipped all over the world.
Located in the front 10,000 square feet of the DC, "Vics Garage" is home to Vic Edelbrock's
personal collection of memorabilia, including R&D vehicles, street rods, street machines
and race cars from over 78 years in the automotive aftermarket industry.
Edelbrock D

istribution C

enter in Torr

ance, CA.

HOW IT ALL BEGAN...

Vic Edelbrock Sr. was born in Eudora, Kansas a small farming community near Kansas
City in 1913. His father supported the family comfortably as the owner of the local
grocery store. When the Edelbrock grocery store burned down in 1927, Vic left school
at age 14 to help support the family. He had a natural talent for mechanics. His first
job was at an auto repair shop where he developed his skills as an auto mechanic.
When the Great Depression hit Kansas, the young Vic Edelbrock looked to the
prosperous west for a new home.

The "Slingshot" manifold,

first to feature the famous
Edelbrock name!

A NEW START IN CALIFORNIA

THOROUGH TESTING DELIVERED RESULTS

In 1931, Vic migrated to California to live with his brother. It was here that he met
Katie, who became his wife in 1933. With his new brother-in-law, Vic opened his first
repair shop on Wilshire Boulevard in Beverly Hills. The business flourished and in 1934
he moved into his own shop on the corner of Venice and Hoover in Los Angeles.

The roadster became an important part of Vics product development. He would install
his parts on the roadster to determine how well they would perform. One of Vics ideas
was modified factory cast iron Denver cylinder heads which incorporated a special
high-altitude design featuring higher compression. Vic would fill and mill the head
for a further increase in the compression, gaining even more power.

Between 1934 and the start of the war, several important events occurred. Vic Sr.s
reputation as an expert mechanic helped his business grow and he moved his shop
three times during this period.

Meanwhile, Vic received multiple requests for his twin carb manifold. This was the
driving force behind the opening of his own performance parts business.

Vic and Katies only child, Vic Jr., was born in 1936. In 1938, Vic Sr. bought his first
project car a 1932 Ford Roadster. This car was a turning point in Edelbrock history.

Three weeks before Pearl Harbor and the start of World War II, Vic was clocked at the
speed of 121.42 mph in his 32 at Rosamond Dry Lake.

It was Vic Sr.s entry into the world of hot rods and it inspired the design and
manufacture of the first Edelbrock intake manifold.

During the war, Vic shelved his racing activities and used his machinist skills for the
war effort. Vics war-time experiences increased his perception of what he could build
with the right machining tools.

SLINGSHOT MANIFOLD
When Vic bought the roadster, he joined with Tommy Thickstun to design the
Thickstun manifold for the flathead. When Vic wasnt happy with the performance,
he designed his own aluminum intake manifold. It was called the Slingshot.
The Slingshot was a 180 manifold for a Ford Flathead using two Stromberg 97
carburetors. This was the first product to feature the famous EDELBROCK name.
Before the war, Vic produced about 100 of these flathead Ford manifolds. Vic raced
and tested his new manifold on his 1932 Ford at the dry lake beds, 80 miles
northeast of Los Angeles (where Edwards Air Force base is today).
Vic became a consistent winner with his modified roadster at racing speeds of 112
mph. Vic would drive the Ford to the dry lakes, remove the fenders and windshield, then
race the car. At the end of the races, he would re-install the fenders and the windshield
and drive it home.

g
Vic's SCTA dash plaque for goin
in 1939
e
Lak
Dry
nd
112 mph at Rosamo

THE NEW BEGINNING

At the end of the war, Vic purchased his first building to open a machine shop and
repair facility at 1200 North Highland in Hollywood, CA.
It was here that Vic designed his first aluminum racing heads for flathead Fords. Like
the Slingshot, these heads were well received. The business was on the way to becoming
more of a performance parts shop than a repair shop. So much so, that the idea was set
forth to create a catalog offering parts for general sale.
The first catalog was printed in 1946 with the name Edelbrock Power and Speed
Equipment across the front cover. This catalog included Edelbrock heads and intakes
as well as pistons, steering wheels and crankshafts. At this time, Vic was committed
to running his business and participating in his favorite sport midget racing.

1939 flyer announcing races at

Rosamond dry lakes

The first atalog

C
Edelbrock
circa 1946

Vic Sr.'s win

nin
included so g midget team
me of the b
est drivers
of the day in
c
winner Rod luding Indy 500
ge
Walt Faulkn r Ward, Perry Grimm,
er and Billy
Vukovich

MIDGET RACINGA SUCCESS STORY

Before the war, Vic bought his first midget and knew it wouldnt be his last.
In 1946, he bought a midget built by D.W. McCully. But it was the third midget he
purchased that would become part of racing history. The 7th Kurtis Kraft midget,
which the company still owns, was purchased later that year. With Bobby Meeks
as head wrench, they toured the Southern California tracks, racing up to six nights
a week. Vics winning team included such greats as Perry Grimm, Walt Faulkner,
Billy Vukovich and Rodger Ward. Vic was now known for fast flathead Fords and
race-winning midgets.
History was made when Vics V8-60 equipped midget broke the winning streak
of the Offy-equipped midgets. With Rodger Ward at the wheel and nitromethane
in the fuel, #27 beat the Offys in the first and only V8-60 win at the famous
Gilmore Stadium.
Vic was the first to use nitromethane as fuel, and needless to say, his competitors
had no idea what that strange smell and color was coming from the exhaust.

VICS FIRST PURPOSE-BUILT SHOP

Business flourished and in 1949, Vic moved into his first purpose-built shop on
Jefferson Blvd. It was 5,000 sq. ft. and equipped with a small machine shop,
repair bays, engine dynamometer, a small stock room
and office space. In this new facility, Vic expanded
his business by designing
more cylinder heads, more
intake manifolds and even
racing pistons for several
different applications.

led Vic to produce

The new shop enab rts such as this
higher quality pa
-'48 Fords
new head for 1938

Edelbrock Equipment Company on Jefferson Blvd in Los Angeles

THE FIRST ENGINE

DYNAMOMETER
With a solid business now developing, Vic
bought one of the performance industrys
first engine dynos in 1948. With this 200
HP Clayton dyno he was now able to get
actual data to gauge the effectiveness
of his products. This dyno allowed Vic
to prove that his designs not only
won races but made measurable
performance gains. By now, Vic
Edelbrock Sr.s equipment was on
almost every winning car on the
dry lakes and the midget tracks.
Ed

elbrock

's first E

ngine D

ynamom

eter

Manifold Production Jefferson Location Circa 1950's

HOW WE EVOLVED

Pierson
Brothers Coupe

Don Waite's 1927 Model T Roadster

at the Bonneville Salt Flats

REPUTATION GROWS AS EDELBROCK

EQUIPPED CARS SET RECORDS

1949 - Edel
winner of the brock equipped Bachelor
Hot Rod Magaz
-Xydias So-C
al
ine Trophy fo
r top speed at Special
the Salt Flats

In the early 1950s, dry lakes racing activities expanded to include Bonneville. Edelbrock
equipped cars continued to dominate. The first single engine streamliner to go over 200
mph was the Edelbrock-equipped Bachelor-Xydias So. Cal. Special. Don Waite, former
Vice President of Engineering at Edelbrock from 1990-95, raced an Edelbrock-equipped
160 mph 1927 Model-T Roadster. When Don decided his Roadster needed to go faster,
he worked with Vic Sr. and Bobby Meeks from 1950 to 1952 to streamline the body
and build a 304 cubic-inch flathead. Now called The Edelbrock Special the roadster
was equipped with an Edelbrock 4-carb intake, Edelbrock heads and pistons. Using
nitromethane, this 1927 Model-T went 192 mph on the Bonneville Salt Flats.
During this time, the business continued to expand. The Edelbrock catalog grew as
Vic expanded his line of cylinder heads, intake manifolds, flywheels, pistons, cams
and adjustable tappets for Fords, Mercurys and Lincolns. His catalog also included
parts from Paul Scheifer, Ed Iskenderian, Harmon & Collins and Ed Winfield.

BREAKTHROUGHS

the Edelbrock
Many Records were set in
Cal Special
So
ias
Xyd
orhel
powered Bac

Vic Sr. began dyno tests on the brand new small-block Chevrolet engine in 1955.
Several power-producing manifolds were the result, the first being the
three-carb intake manifold that was featured on the cover of Hot
Rod magazine. The six-carb Ram Log manifold for the street and
strip was the next development. Then in 1958, Vic managed an
industry first by getting one horsepower-per-cubicinch from a 283 cid small-block Chevy with the
new Cross Ram manifold. This breakthrough
led Edelbrock to develop manifolds for
Pontiac and Chrysler engines as well.

The Edelbrock Ram-Log 6-Deuce intake helped pave

the way for higher horsepower innovation including
1-Horsepower per cubic inch, an industry first
accomplished by Vic Sr.

Edelbrock Headquarters has been

ted
loca in Torrance California since 1988

Vic Sr. and Vic Jr. in 1960

FROM FATHER TO SON

At the early age of 49, cancer took the life of Vic Edelbrock Sr. He was a man held in
high esteem and it was a sad day for the aftermarket industry and for those who loved
him. The year was 1962 and the Edelbrock Equipment Company was handed over to
Vic Jr. and a group of loyal employees, most of whom had been with Vic Sr. since the
beginning. They knew what it took to continue the traditions Vic Sr. had begun.

CONTINUING INNOVATION
In 1964, a good friend named Bob Joehnck saw an opportunity to develop an intake
for a small-block Chevy. Vics response was, No, the factory already makes a
manifold. He changed his mind a week later. The C-4B manifold was another turning
point for the Edelbrock Equipment Company. The golden age of the 1960s and
1970s brought about the Tunnel Ram, Tarantula and Streetmaster manifolds. Vic Jr.
was looking towards the future of the industry.
From 1971 to 1974, he served as President of the Specialty Equipment Marketing
Association (SEMA) to educate both the public and the legislators in Washington to
the benefits of a strong and legal performance parts industry.
The 80s and 90s brought about a new direction as Edelbrock Corporation moved
into a more diverse product line with carburetors, camshaft kits, valvetrain parts,
exhaust systems, engine accessories, fuel system parts, cylinder heads and more.

New for 2016, Edelbrock E-Street 2 TBI Universal Fuel

Injection, and Edelbrock Pro-Flo 3 Electronic Fuel Injection
Kits for small-block Chevy applications

EDELBROCK TODAY

Its amazing to see how this com

pany has grown since my dad
started it 77 years ago in
a small garage in Los Angeles
, California. Today, Edelbrock
encompasses six locations:
Three in Torrance California, two
in San Jacinto, California, and
one in Sanford North
Carolina totaling over 500,000
square feet.
The Proven Performance phil
osophy that began with my dad
in 1938 continues today
with the same high standards
of performance and quality. Our
R&D department uses
the latest state-of-the-art tech
nology and testing facilities to
make sure we deliver
the best possible products. Our
Aluminum Foundries, located
in San Jacinto have been
called the most state-of-the
-art sand cast foundry west of
the Mississippi. Our
investment in American facilitie
s is proof of our commitment
to Made in USA products
and performance. My dad wou
ld be proud of what his compan
y has grown into and the
products we produce.
This year, were excited to tell
you about many of the great prod
ucts well be bringing
to the market. We continue to
expand our E-Force Supercharg
er line by introducing
a new system for the 2012-15
Scion FR-S, Subaru BRZ and Toyo
ta GT86. Plus, weve
also expanded our existing sup
ercharger application base to
include offerings for the
2015-16 Corvette ZO6 and 201
5 Ford Mustang. Other new prod
ucts include a Performer
cylinder head for 2001-15 Che
vrolet Duramax diesel engines
, as well as new intake
manifolds for the Ford Coyote
engine and the GM LS3.
Finally, our biggest announcem
ent is the release of our next gen
eration of Fuel Injection
Systems. Our E-Street 2 EFI univ
ersal throttle body system deli
vers the same great
affordable performance, but now
with improved electronics, bas
e maps and more
for an even better experience.
Our Pro-Flo 3 fuel injection kits
for small-block Chevy
applications take self-learnin
g EFI to the next level by allowin
g you to adjust timing
through our E-Tuner app from
your Android phone or tablet.
We hope you will continue to give
us your input and suggestions
as it helps us in
producing the best parts in the
automotive aftermarket. If you
r are ever in Southern
California, please give us a call
and make an appointment to
take a tour of our facilities
and my private car collection
at Vics Garage.
Happy Motoring in 2016!

Vic Edelbrock
Chairman Edelbrock, LLC

CARBURETORS
CYLINDER HEADS GASKETS MANIFOLDS
CAMSHAFT & VALVETRAIN
KITS POWER PACKAGES
SUPERCHARGERS
EFI
CRATE ENGINES
WATER PUMPS
ACCESSORIES

Edelbrock carburetors bolt on

and run right out of the box
Dependable street performance
and smooth throttle response
throughout the power band
Factory set float levels,
adjustments are rarely needed
Change jets, adjust floats and
replace needles/seats without
draining fuel or removing carb
from manifold
Two-piece design means no
gaskets below the fuel level
for leak-free operation
Installation & tuning DVD
included with every
NEW carburetor
Performer Series available
with choice of three finishes;
satin, EnduraShine and
black powder coated finish

PERFORMER SERIES INTRODUCTION

PERFORMER SERIES

OUTSTANDING STREET PERFORMANCE

A precisely tuned, quality-built carburetor should be able to handle the rigors of daily driving while
delivering consistent, reliable street performance from day to day. Several characteristics make our
carburetors outstanding street performers. The first one is that they use metering rods to transition
between circuits. They are unaffected by engine backfires, which means that there are no power valves
to blow out, and the rods can be changed in seconds without carburetor removal or fuel draining.
Secondly, they have the unique ability to hold a tune, so once theyre tuned, they stay tuned.
What this means to you is that compared to other carburetors, the performance remains consistent
and the calibration stays unchanged. The lightweight all-aluminum body features a two-piece body
that resists warping and is compatible with gasohol and blended fuels. The simple tub-type bowls
and rear-pivot floats all contribute to a carburetor thats reliable, user-friendly and is easily tuneable
for miles and miles of trouble-free operation.

FEATURES OF PERFORMER SERIES & THUNDER SERIES AVS CARBS

Secondary Air Velocity
Valve Senses Air for a
Smooth Transition from
Part to Full Throttle
Adjustable Secondary Valve
Available on Thunder Series
Carbs, see page 15

Lightweight Aluminum Carb Releases

Heat Faster than Zinc

Float Levels are Set at the Factory

so Adjustments are Rarely Necessary

SPORTSWEAR
INDEX

Great Looking
Ball-Burnished
Aluminum Finish
Throttle Linkage Fits
all GM plus Ford
and Chrysler with
Manual Trans
Adapters Available
for Other Engines,
see page 19

Available with
Manual or
Electric Choke
Durable Two-Piece
Design Change Jets,
Adjust Floats and Replace
Needles/Seats without
Draining Fuel or Removing
Carb from Manifold

Gasket Located
Above Fuel Level for
Leak-Free Operation
(unlike other brands)

FUEL PUMPS

NITROUS

CARBS

Bolts onto Square-Bore Manifolds

as well as Spread-Bore Designs
with Adapter on page 25
1/4" NPT Rear Vacuum Port
(on all Carbs except Marine)

11

Includes Timed and Full Vacuum Ports along with PCV Outlet
(except Marine and EGR Models) for a Simple Installation

WWW.EDELBROCK.COM

CARBURETORS

THUNDER SERIES AVS INTRODUCTION CARBS

Spring loaded design offers

quick throttle response

EXCLUSIVE
FULL 1-YEAR
WARRANTY

Adjust the Qwik-Tune

Secondary Air-Valve
with simple tools
no springs required

SUPERCHARGERS

THUNDER SERIES AVS

Our Unique Qwik-Tune Secondary Air Valve can be Easily

Adjusted in Seconds to Suit a Variety of Needs
No Extra Springs Required for Optimum Performance!

THE BEST STREET PERFORMANCE CARBURETOR

EFI

The next step up from our Performer Series Carburetors is our Thunder Series AVS. Designed and calibrated
to deliver optimum street performance in hundreds of applications, Edelbrock Thunder Series AVS Carbs
are undeniably the most innovative and dependable street performance carburetors available today.
Primary and secondary booster clusters offer the most accurate and up-to-date calibration available for
todays fuels and octane levels. The Thunder Series unique Qwik-Tune Secondary Air Valve allows for
limitless calibration of the secondary circuit with simple hand tools while on your vehicle. Its quick.
Its simple. Its effective. It can be easily adjusted in seconds to suit your application no extra parts
required to achieve optimum performance. Its features like this that make the Edelbrock Thunder Series AVS
carburetors the best you can buy.
Every Edelbrock carburetor is manufactured in the USA and has been specifically designed and tuned
by Edelbrock engineers to provide the widest overall torque range. For unmatched street performance,
combine them with Edelbrock Performer, Performer Air-Gap, Performer EPS , RPM Air-Gap, Performer RPM
or Torker II manifold and camshaft combinations, as well as most stock and other aftermarket manifolds
of similar design.

CRATE ENGINES
WATER PUMPS

EDELBROCK CARBS ARE

MANUFACTURED IN THE USA
FOR UNSURPASSED QUALITY.

ACCESSORIES

SELECT EDELBROCK CARBURETORS ARE

AVAILABLE IN THESE THREE FINISHES

POWER PACKAGES KITS

Adjustments can be
completed in seconds with
a flathead and T-15 torx
screwdrivers

QWIK-TUNE SECONDARY
AIR VALVE

CAMSHAFT & VALVETRAIN

Great Looking Black

Hardware for a
Customized Style

Lightweight
adjustable valve
secondary allows
for more accurate
calibrations across
the RPM range

MANIFOLDS GASKETS CYLINDER HEADS

Compatible with single

or dual feed fuel lines
for complete fuel
system flexibility

The same outstanding features as

the Performer Series and more!
Adjustable Valve Secondary
allows for simple and accurate
tuning across the RPM range
Exclusive twelve month
Thunder Series AVS complete
satisfaction warranty
Optional single or dual fuel
inlet allows for total fuel
plumbing flexibility
The most innovative and
dependable street performance
carburetor available

NITROUS
FUEL PUMPS
SPORTSWEAR

Satin Finish

Black Powder
Coated Finish

EMISSIONS GUIDE

PLEASE REFER TO PAGE 212 FOR MORE INFORMATION REGARDING THE EMISSIONS GUIDE.

12

INDEX

l 50-STATE LEGAL l RACING ONLY l PRE-POLLUTION CONTROLLED VEHICLES l STOCK REPLACEMENT l ENGINE SWAP

CARBURETORS
CYLINDER HEADS GASKETS MANIFOLDS
CAMSHAFT & VALVETRAIN

500 cfm Manual Choke #1404

600 cfm Electric Choke #1400

EFI
WATER PUMPS

CRATE ENGINES

600 cfm Manual

Choke #14054 with
EnduraShine Finish

600 cfm Electric Choke #14064 with EnduraShine Finish

CALIBRATED FOR FUEL ECONOMY

Calibrated for maximum fuel economy. Not for computer-controlled engines. Includes timed vacuum ports,
EGR and fuel vapor outlet. Comes with the following jets, rods and springs: Metering Jets Primary .098,
Secondary .095; Metering Rods .073 x .047; Step-Up Spring orange (5" Hg). Includes carb studs and
hardware. EGR adapter #1476 sold separately. For auto trans throttle lever adapters and more, see pages
19 and 27.
600 cfm, Square-Flange, Electric Choke (EGR) l ..................................................................................#1400
GM Transmission Cable Adapter ..............................................................................................................#8026
MANUAL CHOKE
CALIBRATED FOR PERFORMANCE
Designed and calibrated for optimum street performance in small-block and some big-block engines.
Match with a variety of manifolds that include Edelbrock Performer, Performer EPS, Performer RPM,
RPM Air-Gap, Torker II or other brands of similar design. Includes both timed and full vacuum ports for
ignition advance. Electric choke #1478 can be added if needed. Comes with: Metering Jets Primary .100,
Secondary .095; Metering Rods .070 x .047; Step-Up Spring orange (5" Hg). Use our Carb Stud Kits #8008
or #8024 if needed, see page 26. For auto trans throttle lever adapters and more, see pages 19 and 27.
EnduraShine Black
Satin
600 cfm, Square-Flange, Manual Choke (non-EGR) l ................................... #14054 ........ #14053 ........#1405
Universal Carburetor Choke Cable with Polished Knob ......................................................................#8013
GM Transmission Cable Adapter ..............................................................................................................#8026
ELECTRIC CHOKE
CALIBRATED FOR FUEL ECONOMY
Designed for small-block and small displacement big-block engines, these carbs are recommended only
for stock to Performer level applications. Includes both timed and full vacuum ports for ignition advance.
They are not recommended for use on RPM or Torker II intake manifolds. Match with an Edelbrock
Performer or Performer EPS manifold or other brands of similar design. Calibrated 2% leaner than #1405.
Comes with: Metering Jets Primary .098, Secondary .095; Metering Rods .075 x .047; Step-Up Spring
yellow (4" Hg). Use our Carb Stud Kits #8008 or #8024 if needed, see page 26. For auto trans throttle lever
adapters and more, see pages 19 and 27.
EnduraShine Black
Satin
600 cfm, Square-Flange, Electric Choke (non-EGR) l....................................#14064 ....... #14063 ........#1406
GM Transmission Cable Adapter ..............................................................................................................#8026

750 CFM,

MANUAL CHOKE
CALIBRATED FOR PERFORMANCE
Designed and calibrated for optimum street performance in small-block and big-block engines with
Performer RPM, RPM Air-Gap and Torker II manifolds and with Performer manifolds on large cubic-inch
engines. Includes both timed and full vacuum ports for ignition advance. Electric choke #1478 can be
added if needed. Comes with: Metering Jets Primary .113, Secondary .107; Metering Rods .071 x .047;
Step-Up Spring orange (5" Hg). Use our Carb Stud Kits #8008 or #8024 if needed, see page 26.
For auto trans throttle lever adapters and more, see pages 19 and 27.
Black
Satin
750 cfm, Square-Flange, Manual Choke (non-EGR) l .......................................................#14073 ......#1407
Universal Carburetor Choke Cable with Polished Knob ......................................................................#8013
GM Transmission Cable Adapter ..............................................................................................................#8026

NITROUS

ACCESSORIES

MANUAL OR ELECTRIC CHOKE

CALIBRATED FOR PERFORMANCE
Designed and calibrated for small cubic-inch engines such as 305 c.i.d and smaller Chevrolet; 302 c.i.d. and
smaller Ford and dual-quad applications such as Edelbrock C-26, F-28 and Street Tunnel Ram. Match with
an Edelbrock Performer or Performer EPS manifold or other brands of similar design. Includes both timed
and full vacuum ports for ignition advance. Comes with: Metering Jets Primary .086, Secondary .095;
Metering Rods .065 x .052; Step-Up Spring orange (5" Hg). Use Carb Studs #8008 or #8024 if needed,
see page 26. For auto trans throttle lever adapters and more, see pages 19 and 27.
500 cfm, Square-Flange, Electric Choke (non-EGR) l ..........................................................................#1403
500 cfm, Square-Flange, Manual Choke (non-EGR) l ..........................................................................#1404
Universal Carburetor Choke Cable with Polished Knob ......................................................................#8013
GM Transmission Cable Adapter ..............................................................................................................#8026

600 CFM, ELECTRIC CHOKE

FUEL PUMPS
SPORTSWEAR
INDEX

PERFORMER SERIES

500 CFM,

SUPERCHARGERS

KITS POWER PACKAGES

CARBS

750 cfm Manual Choke #14073

13

Performer Series Carbs will work with Ford automatic overdrive trans (AOD) when used with Lokar bracket SRK-4000,
for more info call (865) 966-2269 or go to www.lokar.com

WWW.EDELBROCK.COM

CARBURETORS

PERFORMER SERIES CARBS

Dyno tests: Edelbrock #1412 vs. Holley #3310

Performer Series Carbs will work with Ford automatic overdrive trans (AOD) when used with Lokar bracket SRK-4000,
for more info call (865) 966-2269 or go to www.lokar.com

EMISSIONS GUIDE

PLEASE REFER TO PAGE 212 FOR MORE INFORMATION REGARDING THE EMISSIONS GUIDE.

14

INDEX

l 50-STATE LEGAL l RACING ONLY l PRE-POLLUTION CONTROLLED VEHICLES l STOCK REPLACEMENT l ENGINE SWAP

SPORTSWEAR

750 cfm Marine, Electric Choke #1410

FUEL PUMPS

ELECTRIC CHOKE
CALIBRATED FOR PERFORMANCE
Designed and calibrated for optimum marine performance in small-block and big-block V8 engines
with Performer RPM, RPM Air-Gap and Torker II manifolds and large cubic-inch engines with Performer
manifolds. Comes with: Metering Jets Primary .113, Secondary .107; Metering Rods .071 x .047; StepUp Spring orange (5" Hg).
750 cfm, Square-Flange, Electric Choke, Marine (non-EGR) l ..........................................................#1410

NITROUS

750 CFM,

ACCESSORIES

600 cfm Marine, Electric Choke #1409

WATER PUMPS

ELECTRIC CHOKE
CALIBRATED FOR PERFORMANCE
Designed and calibrated for optimum marine performance in small-block V8 engines with a variety of
manifolds that include Edelbrock Performer, Performer RPM, RPM Air-Gap, Torker II or other brands of
similar design. Also ideal for Chevy 4.3L V6 engines with a Performer manifold (page 33) and Calibration
Kit #1485. Comes with: Metering Jets Primary .098, Secondary .101; Metering Rods .068 x .047;
Step-Up Spring orange (5" Hg).
600 cfm, Square-Flange, Electric Choke, Marine (non-EGR) l...........................................................#1409

CRATE ENGINES

600 CFM,

EFI

For use in marine applications, these Edelbrock carbs comply with U.S. Coast Guard safety standards.
Cast surfaces are iridited with Teflon-coated shafts and pump arm for maximum protection. Other features
include modified bowl venting, specially designed throttle shafts, accelerator pump seal, 3/8" inverted flare
fuel inlet fitting, tube in airhorn for fuel pump vent, 5-1/8" flame arrestor flange, universal throttle lever and
revised secondaries for improved transient performance. Note: These carbs have no vacuum ports and
are not for automotive use. Use our Carb Stud Kits #8008 or #8024 if needed, see page 26.

SUPERCHARGERS

MARINE CARBURETORS

POWER PACKAGES KITS

EPS 800 Manual Choke #1412

EPS 800, MANUAL OR ELECTRIC CHOKE

CALIBRATED FOR PERFORMANCE
Designed and calibrated for maximum street performance with most Performer RPM, RPM Air-Gap and
Torker II manifolds and with Performer manifolds on large cubic-inch engines. Dyno tests proved that
the EPS 800 carb outperformed a Holley #3310 carb out-of-the-box by 26 ft-lbs of torque and 22 hp on a
small-block Chevy engine equipped with an Edelbrock Performer RPM power package. Features include a
high-capacity accelerator pump and an improved primary and secondary cluster design. EPS 800 has the
same superior features as the rest of the Performer Series line such as out-of-the-box performance and
2-piece design. Comes with: Metering Jets Primary .113, Secondary .101; Metering Rods .071 x .047;
Step-Up Spring orange (5" Hg). Use our Carb Stud Kits #8008 or #8024 if needed, see page 26.
For auto trans throttle lever adapters and more, see pages 19 and 27.
800 cfm, Square-Bore, Manual Choke (non-EGR) l.................................................................................#1412
800 cfm, Square-Bore, Electric Choke (non-EGR) l ................................................................................#1413
Universal Carburetor Choke Cable with Polished Knob .........................................................................#8013
GM Transmission Cable Adapter .................................................................................................................#8026

CAMSHAFT & VALVETRAIN

750 cfm Electric Choke #1411

ELECTRIC CHOKE (CONTINUED)

CALIBRATED FOR ECONOMY WITH PERFORMANCE
Designed for 402 c.i.d. and larger engines with Edelbrock Performer manifolds or other brands of similar
design, these carbs are recommended only for stock to Performer level applications. Provides excellent
fuel economy when used on 454 c.i.d. Chevy and 460 c.i.d. Ford with Performer manifold. They are not
recommended for use on RPM or Torker II intake manifolds. Calibrated 2% leaner than #1407.
Includes both timed and full vacuum ports for ignition advance. Comes with: Metering Jets Primary .110,
Secondary .107; Metering Rods .075 x .047; Step-Up Spring orange (5 Hg). Use our Carb Stud Kits #8008
or #8024 if needed, see page 26. For auto trans throttle lever adapters and more, see pages 19 and 27.
750 cfm, Square-Flange, Electric Choke (non-EGR) l .............................................................................#1411
GM Transmission Cable Adapter .................................................................................................................#8026

MANIFOLDS GASKETS CYLINDER HEADS

750 CFM,

CARBURETORS
500 cfm Electric
Choke #1801

KITS POWER PACKAGES

See page 19 for

Auto Trans Throttle Lever
Adapters and More.

Important Note: Manual choke AVS Carbs cannot be converted to electric choke. Carbs #1803, #1804 and #18034, #18044
are calibrated for dual-quad applications only and need to be purchased together, one manual and one electric.
For single carb small-displacement engines and Street Tunnel Ram applications use carbs #1801, #1802, #18014 and #18024.

Important Note: Manual choke AVS Carbs cannot be converted to electric choke.

SUPERCHARGERS

650 CFM OFF-ROAD AVS, MANUAL OR ELECTRIC CHOKE

CRATE ENGINES

EFI

650 cfm Manual Choke #1805

WATER PUMPS

Designed and calibrated for optimum off-road performance in small-block and some big-block engines.
Includes spring-loaded needles and seats for superior fuel control in off-road terrain. Match with a variety
of manifolds that include Edelbrock Performer, Performer EPS, Performer RPM, RPM Air-Gap or other
brands of similar design. Includes: Metering Jets Primary .095, Secondary .098; Metering Rods .065 x .047;
Step-Up Spring Orange (5" Hg). Use our Carb Stud Kits #8008 or #8024 if needed, see page 26.
For auto trans throttle lever adapters and more, see pages 19 and 27.
650 cfm, Square-Flange, Manual Choke (non-EGR) l ..........................................................................#1825
650 cfm, Square-Flange, Electric Choke (non-EGR) l ..........................................................................#1826
Universal Carburetor Choke Cable with Polished Knob ......................................................................#8013
GM Transmission Cable Adapter ..............................................................................................................#8026
650 cfm Electric
Choke #18064 with
EnduraShine Finish

NITROUS

ACCESSORIES

Designed and calibrated for small cubic-inch engines such as 305 c.i.d and smaller Chevrolet; 302
c.i.d. and smaller Ford and dual-quad applications such as our RPM Dual-Quad Air-Gap, Edelbrock
C-26, F-28 and Street Tunnel Ram. For single carb applications, match with an Edelbrock Performer or
Performer EPS manifold or other brands of similar design. Includes both timed and full vacuum ports
for ignition advance. #1801/#1802 are calibrated for single-quad applications and factory equipped
with: Metering Jets Primary .086, Secondary .095, Primary Rod .065 x .052, orange spring (5" Hg).
#1803 is calibrated for dual-quad applications and factory equipped with: Metering Jets Primary .086,
Secondary .077; Metering Rods .065 x .057; #1804 includes Primary .086, Secondary .077; Metering Rods
.065 x .052; Step-Up Spring orange (5" Hg). Use Carb Studs #8008 or #8024 if needed, see page 26.
For auto trans throttle lever adapters and more, see pages 19 and 27.
CALIBRATED FOR SINGLE CARB APPLICATIONS
EnduraShine
Satin
500 cfm, Square-Flange, Electric Choke (non-EGR) l ............................................#18014 .................#1801
500 cfm, Square-Flange, Manual Choke (non-EGR) l ............................................#18024 .................#1802
GM Transmission Cable Adapter ..............................................................................................................#8026
CALIBRATED FOR DUAL-QUAD APPLICATIONS
500 cfm, Square-Flange, Electric Choke (non-EGR) .................................................#18034 .................#1803
500 cfm, Square-Flange, Manual Choke (non-EGR) .................................................#18044 .................#1804
Universal Carburetor Choke Cable with Polished Knob ......................................................................#8013

650 CFM AVS, MANUAL OR ELECTRIC CHOKE

Designed and calibrated for optimum street performance in small-block and some big-block engines.
Match with a variety of manifolds that include Edelbrock Performer, Performer EPS, RPM Air-Gap,
Performer RPM, Torker II or other brands of similar design. Includes: Metering Jets Primary .095,
Secondary .098; Metering Rods .068 x .047; Step-Up Spring Orange (5" Hg). Use Carb Studs #8008
or #8024 if needed, see page 26. For auto trans throttle lever adapters and more, see pages 19 and 27.
EnduraShine
Satin
650 cfm, Square-Flange, Manual Choke (non-EGR) l ............................................#18054 .................#1805
650 cfm, Square-Flange, Electric Choke (non-EGR) l ............................................#18064 .................#1806
Universal Carburetor Choke Cable with Polished Knob ......................................................................#8013
GM Transmission Cable Adapter ..............................................................................................................#8026

FUEL PUMPS
SPORTSWEAR
INDEX

THUNDER SERIES AVS

500 CFM AVS, MANUAL OR ELECTRIC CHOKE

CAMSHAFT & VALVETRAIN

CYLINDER HEADS GASKETS MANIFOLDS

CARBS

Important Note: Manual choke AVS Carbs cannot be converted to electric choke.

800 CFM AVS,

MANUAL OR ELECTRIC CHOKE

Designed and calibrated for optimum street performance in high-horsepower small-block and big-block engines.
Match with a variety of manifolds that include Edelbrock Performer, Performer RPM, RPM Air-Gap, Torker II or
others of a similar design. Includes the following: Metering Jets Primary .113, Secondary .101; Metering Rods
.068 x .047; Step-Up Spring Orange (5" Hg). Use Carb Stud Kits #8008 or #8024 if needed, see page 26.
For auto trans throttle lever adapters and more, see pages 19 and 27.
EnduraShine
Satin
800 cfm, Square-Flange, Manual Choke (non-EGR) l ............................................#18124 .................#1812
800 cfm, Square-Flange, Electric Choke (non-EGR) l ............................................#18134 .................#1813
Universal Carburetor Choke Cable with Polished Knob ......................................................................#8013
GM Transmission Cable Adapter ..............................................................................................................#8026
Important Note: Manual choke AVS Carbs cannot be converted to electric choke.

800 cfm Manual Choke #1812

15

Thunder Series AVS Carbs will work with Ford automatic overdrive trans (AOD) when used with Lokar bracket
SRK-4000, for more info call (865) 966-2269 or go to www.lokar.com

WWW.EDELBROCK.COM

CARBURETORS

VINTAGE 94 SERIES CARBS

94 Primary
Carburetor #1151

Machined and assembled by Edelbrock in the U.S.A.

Features a 3-bolt flange and cast aluminum base
Includes calibration instructions for Flathead and small cubic inch V8 engines
Match with an Edelbrock intake manifold, cylinder heads, linkage, fuel blocks and
Classic series accessories for the complete classic look of the early hot rod era
Fits any standard 3-bolt intake manifold

EDELBROCK 94 STRAIGHT THROTTLE LINKAGE KITS

EMISSIONS GUIDE

PLEASE REFER TO PAGE 212 FOR MORE INFORMATION REGARDING THE EMISSIONS GUIDE.

16

INDEX

l 50-STATE LEGAL l RACING ONLY l PRE-POLLUTION CONTROLLED VEHICLES l STOCK REPLACEMENT l ENGINE SWAP

SPORTSWEAR

Edelbrock 94 Round Cleaner #1202

FUEL PUMPS

Edelbrock 94 Round Air Cleaner is designed to work with any 2-5/8" diameter 2-barrel carburetor.
It features a triple chrome top with a brilliant shine. Kit includes top, base, air filter, band clamp and wing
nut. Edelbrock 94 Air Cleaners are a great way to finish off your carb and intake manifold installation!
Edelbrock 94 Round Chrome Air Cleaner l ...........................................................................................#1202

NITROUS

EDELBROCK 94 ROUND CHROME AIR CLEANER

ACCESSORIES

Edelbrock 94 Progressive Linkage Kit #1033

Vic Edelbrock Sr. invented the triple carburetor progressive linkage providing a bolt-on linkage solution
for multiple carburetor set-ups on small-block V8 applications. The original design has been re-introduced,
giving you the genuine look of the 1950s and 60s. The progressive design opens the primary carburetor(s)
to part throttle, then synchronizes all three carburetors to achieve wide-open throttle simultaneously.
These are the most complete kits on the market including return springs and brackets, linkage with
provision for kick down and throttle connection. Edelbrock 94 carburetors are equipped with an extended
length knurled throttle shaft, making these kits an easy bolt-on upgrade. This unique design saves fuel,
provides smoother throttle operation and eliminates flat spots.
Edelbrock 94 Triple Carburetor Progressive Linkage Kit l ................................................................#1033

WATER PUMPS

EDELBROCK 94 PROGRESSIVE THROTTLE LINKAGE KIT

CRATE ENGINES

Edelbrock 94 Dual Carburetor Straight Linkage Kit #1032

EFI

94 Secondary
Carburetor #1152

These throttle linkage kits are a non-progressive linkage for Edelbrock 94 carburetors. These are the
most complete kits on the market including return spring and bracket, linkage with provision for kick
down and throttle connection. Edelbrock 94 carburetors are equipped with an extended length throttle
shaft, making these kits a bolt-on to Edelbrock 94 carbs. They are available for dual, triple and six
carburetor set-ups and are adjustable to fit various carb spacing.
Edelbrock 94 Six Carburetor Straight Linkage Kit l ............................................................................#1031
Edelbrock 94 Dual Carburetor Straight Linkage Kit l .........................................................................#1032
Edelbrock 94 Triple Carburetor Straight Linkage Kit l .......................................................................#1034

SUPERCHARGERS

Edelbrock 94 Carburetor (primary) l .......................................................................................................#1151

Edelbrock 94 Carburetor (secondary) l ..................................................................................................#1152
Carb Stud, Nut and Washer Kit (5/16"-18 x 1-1/4") .............................................................................#8006
Fuel Pressure Regulator with Chrome Finish (1 to 4 PSI) .....................................................................#1789
Heat Insulator Spacer with Studs for Edelbrock 94 Carburetors (1/4")..............................................#8751

POWER PACKAGES KITS

Extended Throttle Shaft

for use with Edelbrock
Straight and Progressive
Linkage Kits

CAMSHAFT & VALVETRAIN

In 1938, Henry Ford needed a more efficient carburetor for his 24-stud Flathead V8 engine, so he
contracted development to the Chandler-Groves Company and the 94 two-barrel carburetor was born,
fueling Ford engines until production ceased in 1957. Flash-forward to 2012 and the 94 is once again
available, by none other than Edelbrock!
Built around Edelbrock's reputation of bolt-on performance carburetors, the Edelbrock 94 two-barrel
carburetor provides nostalgic and period correct hot rods and restorations with the most accurate and
best performing carburetor on the market. The Edelbrock 94 features a die-cast bowl and air horn with
an aluminum 3-bolt base. A secondary version of this carburetor is available and features no choke,
making it a must have for multiple carb setups. They both feature an extended throttle shaft to make
it easier to install dual and triple carburetor combinations, especially when used with Edelbrocks
exclusive progressive linkage. The throttle shaft has also been knurled to prevent the linkage arm from
slipping. Extensive testing, both on the road and in our state-of-the-art engine dynamometer facility
has allowed Edelbrock to offer a power valve and jetting combination that delivers smooth and strong
performance throughout the rpm range for great performance eliminating flatness in various applications.
Includes: .053" primary jets with 5.5" Hg power valve. It is finished off with a zinc-dichromate coating for
durability and classic looks.

MANIFOLDS GASKETS CYLINDER HEADS

EDELBROCK 94 CARBURETORS, 160 CFM

CARBURETORS

#12456

#12645

4.5" Hg .................................#12645
5.5" Hg .................................#12655

#1156

#1158

Universal Choke
Cable #8013

In the past, multiple fittings were needed to plumb vintage carburetors with rubber fuel lines. This fuel
fitting is designed to allow users to accomplish this same task with a single fitting. It contains a brass 3/8"
hose fitting and a gasket. The fitting is threaded to 1/2-20 and as such, will fit the Edelbrock 94, original
94's and the various Stromberg carburetors. The fitting seals on the outer flat area of the carburetor fuel
fitting boss, using the provided crush washer.
Edelbrock 94 Carb Fuel Fitting ...................................................................................................................#1158

EDELBROCK 94 CHOKE CABLE BRACKET

KITS POWER PACKAGES

The Edelbrock Universal Choke Cable for 2-barrel and 4-barrel applications. This cable measures 72" in
length and features a stainless steel outer sleeve. The knob is polished and features an engraved Edelbrock
Equipped logo. This Edelbrock Universal Choke Cable is a nice way to finish off any carburetor installation.
Universal Carburetor Choke Cable with Polished Knob ......................................................................#8013

HEAT INSULATOR SPACER

Heat Insulator Spacer #8751

This is a 1/4" heat insulator spacer kit for Edelbrock 94 Series and Stromberg 97 3-bolt carburetors.
The black wood laminate fiber spacer is ideal for reducing heat transfer from the intake manifold to
the carburetor. Includes all necessary hardware for a complete installation.
Heat Insulator Spacer for Edelbrock 94 and Stromberg 97 Carburetors ...........................................#8751

EDELBROCK 94 CARB REBUILD KIT

This kit has everything needed to rebuild any Edelbrock 94 carburetor. Includes fuel inlet seat, fuel inlet
needle, accelerator pump assembly, accelerator pump spring, accelerator check ball, check ball retainer,
power valve assembly, float gauge and all necessary gaskets.
Edelbrock 94 Carburetor Rebuild Kit ........................................................................................................#1154

CRATE ENGINES

EFI

SUPERCHARGERS

EDELBROCK 94 CARBURETOR FUEL FITTING

UNIVERSAL CHOKE CABLE

FUEL DISTRIBUTION BLOCK AND LOG KITS

MINI FUEL DISTRIBUTION BLOCK KIT
Edelbrock 94 Carb Rebuild Kit #1154

ACCESSORIES

WATER PUMPS

6.5" Hg .................................#12665
Power Valve Block Off ...#12624

This choke bracket kit provides users with a means of holding a manual choke cable in place upon
attaching the cable pull to the carburetor. It includes the bracket and associated hardware.
It is a replica of the original Ford bracket that mounted to the carburetor.
Edelbrock 94 Choke Cable Bracket Kit ....................................................................................................#1156

The Edelbrock Mini Triple Feed allows the user to plumb a dual or triple carb setup from the fuel pump
to the carb. Dual carb applications will require pipe plug #662043 or similar 1/4" -18 NPT plug to block off
the third outlet. This kit comes complete with four 1/4" NPT brass fittings, polished aluminum mini fuel
block #1286, eight Corbin self-tightening clamps and 5 ft. of classic black neoprene hose. Neoprene hose
features internal braid for added strength with a 3/8" inside diameter.
Fuel blocks also available separately, see page 23 for listings.
Mini Triple Fuel Block Kit ..........................................................................................................................#1281
Installation Note: Installations with 5/16" feed line will need fitting #697020 or similar 1/4" NPT x 5/16" barb fitting.

FUEL LOG KITS

Mini Fuel Distribution Block Kit #1281

FUEL PUMPS

NITROUS

Intended for tuning the Edelbrock 94 carburetor, but will also fit original Holley 94s and its later variations.
.048" ....................................#1157 .052" ....................................#1163 .054" ....................................#12455
.049" ....................................#1160 .053" ....................................#1164 .055" ....................................#12456
.050" ....................................#1161 .054" ....................................#1165 .056" ....................................#12457
.051" ....................................#1162

EDELBROCK 94 CARBURETOR POWER VALVES

SPORTSWEAR
INDEX

VINTAGE 94 SERIES ACCESSORIES

EDELBROCK 94 CARBURETOR JETS

CAMSHAFT & VALVETRAIN

CYLINDER HEADS GASKETS MANIFOLDS

CARBS

Carb Fuel Log Kit #1287

17

These Fuel Log kits are exact replicas of the original designs used by Vic Sr. in the 1950s. They are made
from extruded aluminum tube with a 3/8" threaded outlet at each end and a polished finish. Kit includes,
black neoprene hose, Corbin self-tightening clamps, barb fittings, 3/8" pipe plug and a period-correct
Edelbrock decal for the right look. Dual-quad kit #1283 can be used with Edelbrock 94, Performer and
Thunder AVS applications. Triple deuce kits #1284 and #1288 are for use with Edelbrock 94 and similar
applications. Finally, kit #1287 is intended for use with the Edelbrock Ram Log intake manifold or similar
six carburetor application.
Dual-Quad Fuel Log Kit (6-7/16" outlet spacing) ......................................................................................#1283
S/B Ford Triple Deuce Fuel Log Kit (4-7/8" outlet spacing) ...................................................................#1284
S/B Chevy Triple Deuce Fuel Log Kit (5-1/2" outlet spacing) ................................................................#1288
Six Carburetor Fuel Log Kit ........................................................................................................................#1287
Installation Note: Installations with 5/16" feed line will require a 3/8" NPT x 5/16" barb fitting. The end outlet
can also be used to run a fuel pressure gauge if desired.

WWW.EDELBROCK.COM

CARBURETORS

CALIBRATION KITS CARBS

All calibration kits include an assortment of metering rods and jets, one pair of metering rod retaining
springs and a complete assortment of step-up springs (except Calibration Kit #1485 which is designed
for a specific application).

Checking float level with a 7/16 drill bit

PERFORMER SERIES CARBURETORS CALIBRATION KITS

Metering Rods (Pair)

#1485

.092, .095, .098, .101, .104

.101, .104, .107, .110, .113, .116
.104, .107, .110, .113

l
l
l

#1488
#1480
#1489

Emissions
Code
l
l
l

Calibration Kit
Part No.
#1840
#1841
#1842

THUNDER SERIES AVS CARBURETORS CALIBRATION KITS

Application

Metering Rods (Pair)

Metering Jets (Pair)

#1805 & #1806

#1812 & #1813
#1825 & #1826

.065 x .037, .065 x .042, .065 x .047, .070 x .047, .070 x .052
.063 x .037, .065 x .042, .067 x .049, .070 x .047, .070 x .052, .070 x .057, .073 x .042
.063 x .037, .063 x .047, .067 x .049, .068 x .047, .068 x .052

.092, .095, .098, .101, .104

.095, .098, .104, .107, .110, .116
.092, .095, .098, .101, .104

METERING JETS

18

INDEX

PLEASE REFER TO PAGE 212 FOR MORE INFORMATION REGARDING THE EMISSIONS GUIDE.

SPORTSWEAR

l 50-STATE LEGAL l RACING ONLY l PRE-POLLUTION CONTROLLED VEHICLES l STOCK REPLACEMENT l ENGINE SWAP

FUEL PUMPS

EMISSIONS GUIDE

NITROUS

These metering rods are designed for use with Edelbrock Performer Series and Thunder Series AVS
carburetors only. Do not use with other brands. Sold in pairs.
Cruise/Power
Cruise/Power
Cruise/Power
.070 x .057 l ............... #1418
.067 x .049 l ............... #1462
.057 x .049 l ............... #1437
.071 x .047 l ............... #1453
.067 x .055 l ............... #1463
.060 x .057 l ............... #1440
.073 x .037 l ............... #1454
.068 x .042 l ............... #1446
.062 x .052 l ............... #1441
.073 x .042 l ............... #1455
.068 x .047 l ............... #1447
.063 x .037 l ............... #1442
.073 x .047 l ............... #1456
.068 x .052 l ............... #1448
.063 x .047 l ............... #1443
.073 x .052 l ............... #1457
.068 x .057 l ............... #1436
.065 x .037 l ............... #1444
.075 x .037 l ............... #1458
.070 x .037 l ............... #1449
.065 x .042 l ............... #1416
.075 x .042 l ............... #1419
.070 x .042 l ............... #1450
.065 x .047 l ............... #1445
.075 x .047 l ............... #1459
.070 x .047 l ............... #1451
.065 x .052 l ............... #1460
.070 x .052 l ............... #1452
.065 x .057 l ............... #1461

ACCESSORIES

METERING RODS

WATER PUMPS

These metering jets are designed for use with Edelbrock Performer Series and Thunder Series AVS
carburetors only. Do not use with other brands. Sold in pairs.
.110 l ........................... #1432
.095 l ........................... #1426
.077 l ........................... #1420
.113 l ........................... #1433
.098 l ........................... #1427
.080 l ........................... #1421
.116 l ........................... #1434
.100 l ........................... #1428
.083 l ........................... #1422
.119 l ........................... #1435
.101 l ........................... #1429
.086 l ........................... #1423
.104 l ........................... #1430
.089 l ........................... #1424
.107 l ........................... #1431
.092 l ........................... #1425

CRATE ENGINES

.089 (Includes 2 pairs, 4 total jets)

EFI

.083, .089, .092, .098

.089, .092, .098, .101, .104
.095, .098, .101

Calibration Kit
Part No.
#1486
#1479
#1487

SUPERCHARGERS

#1403, #1404, #1801, #1802, #1803 & #1804

.057 x .049, .062 x .052, .063 x .047, .067 x .055, .068 x .052
#1405
.068 x .042, .068 x .052, .070 x .052, .073 x .047, .073 x .052, .075 x .047
#1406
.070 x .037, .073 x .042, .073 x .047
#1409 on 4.3L 90 V6
.068 x .057
with Performer Manifolds #2111 & #2114
#1409
.063 x .047, .065 x .052, .070 x .047, .070 x .052, .073 x .047
#1407, #1410, #1412 & #1413
.065 x .037, .065 x .047, .068 x .047, .073 x .047, .073 x .052
#1411
.070 x .042, .073 x .037, .073 x .042, .075 x .037

Emissions
Code
l
l
l

Metering Jets (Pair)

POWER PACKAGES KITS

Application

CAMSHAFT & VALVETRAIN

Carburetor Calibration Kit #1479

Metering rods can be changed without

removing the lid from the carburetor

MANIFOLDS GASKETS CYLINDER HEADS

CARBURETOR CALIBRATION KITS

CARBURETORS
CYLINDER HEADS GASKETS MANIFOLDS

THROTTLE LEVER ADAPTERS

FOR CHRYSLER AND FORD

#1481

SUPERCHARGERS

#1844

#1493
#1490

#1491

#1495

Dual-Quad Linkage Kit #7094

Universal Choke Cable #8013

EFI
CRATE ENGINES

Designed for Fords with cable activated throttle and automatic transmission kickdown rod.
Repositions stock throttle cable bracket to align with Edelbrock carb throttle arm. Use with
Edelbrock Throttle Lever Adapter #1483 and stock throttle cable bracket. Available in gold iridited finish.
The throttle cable plate kit only works when the throttle bracket is mounted to the intake.
Ford 289-302 l............................................... #1490
Ford 351M/400 l ........................................... #1493
Ford 351W l .................................................. #1491
Ford 429-460 l............................................... #1495

PROGRESSIVE THROTTLE LINKAGE

UNIVERSAL CHOKE CABLE

This Edelbrock Universal Choke Cable is a nice way to finish off any carburetor installation. It features a
polished knob engraved with the Edelbrock Equipped logo. Designed for 2-barrel and 4-barrel applications.
This cable measures 72" in length and features a stainless steel outer sleeve.
Universal Carburetor Choke Cable with Polished Knob ......................................................................#8013

CHOKE CABLE BRACKET

UNI-SYN CARBURETOR BALANCING INSTRUMENT

Uni-Syn is a precision instrument which provides a visual method of balancing multiple carburetor setups
with a high degree of accuracy. Instructions included.
Uni-Syn A (1-bbl. and 2-bbl. with round top; i.e. Edelbrock 94 Series & British S.U. carbs) ..........#4025
Uni-Syn MC (motorcycle) ........................................................................................................................#4027
Glass Tube and Indicator Rebuild Kit ......................................................................................................#4024

CARBURETOR GASKETS

EDELBROCK SQUARE-BORE CARB GASKETS

Gasket Set (includes airhorn and carb-to-manifold gasket) ..................................................................#1472

Airhorn Gasket (5 gaskets included)..........................................................................................................#1499
Carburetor Base Gasket (2 gaskets included) .........................................................................................#3899
Gasket Set #1472

Airhorn Gasket #1499

HEAT INSULATOR GASKETS

Designed to help prevent fuel percolation in Performer Series and Thunder Series AVS carburetors exposed
to extreme underhood temperatures. Use #9265 with open plenum manifolds such as Torker II and Victors.
#9266 features a divided center which is designed to seal the carburetor to dual-plane manifolds including
Performer, Performer RPM and most RPM Air-Gap manifolds. All gaskets come with extended carb studs.
Square-Bore Heat Insulator Gasket (0.320" thick)...................................................................................#9265
Divided Square-Bore Heat Insulator Gasket (0.320" thick) ...................................................................#9266
Square-Bore Heat Insulator Gaskets for
Edelbrock Dual-Quad Manifolds (0.125" thick - 2 gaskets included) l ..............................................#9267

NITROUS

ACCESSORIES

WATER PUMPS

Choke Cable
Bracket #1494

FUEL PUMPS
SPORTSWEAR

FORD THROTTLE CABLE PLATE KITS

Designed for use on Edelbrock Performer Series and Thunder Series AVS carburetors.
Choke Cable Bracket & Clamp Assembly with Gold Iridited Finish ..................................................#1494
Uni-Syn #4025

INDEX

Throttle Lever Adapter #1481 fits 1966 and later Chryslers. #1483 is for Ford automatic transmission
equipped vehicles with cable operated throttle (except A.O.D.). Both accept cruise control.
Use with appropriate throttle cable plate when necessary. Available in gold iridited finish to match
Edelbrock Performer Series Carbs or black to match Edelbrock Thunder Series AVS Carbs.
Gold
Black
Chrysler Throttle Lever Adapter (1966 and later) l .................................................#1481 ...................#1843
Ford Throttle Lever Adapter (1968 and later) l ........................................................#1483 ...................#1844

Designed for use with Edelbrock Dual-Quad intake manifolds. This linkage kit provides smooth throttle
activation using high-quality aluminum, stainless steel and brass parts with spherical rod ends. Will also
work with any dual-quad intake manifolds with a 6-7/16" carb center to center spacing.
Dual-Quad Progressive Linkage Kit .........................................................................................................#7094

KITS POWER PACKAGES

CAMSHAFT & VALVETRAIN

CARBS ACCESSORIES

#9267

AIRHORN GASKET SETS FOR Q-JET CARBURETORS

For Edelbrock and GM Rochester Q-Jet carbs. Not for computer-controlled carbs.
Fits Edelbrock Q-Jet Carbs #1903, #1904, #1905, #1906 and #1910 (5 gaskets included) ..................#1987
Fits Edelbrock Q-Jet Carb #1901 (5 gaskets included) ...........................................................................#1989
Fits Edelbrock Q-Jet Carb #1902 (5 gaskets included) ...........................................................................#1998
#9265

19

#1989

Performer Series & Thunder Series AVS carbs will work with Ford automatic overdrive trans (AOD) when used with
Lokar bracket SRK-4000, for more info call (865) 966-2269 or go to www.lokar.com

WWW.EDELBROCK.COM

CARBURETORS

ACCESSORIES CARBS
VICTOR JR. 2V SPORTSMAN GASKET

Carb Base Gasket for #2901, #2912 and #2940 (6 gaskets included) ....................................................#6940

FORD EGR GASKETS

#3897

#3898

EGR Gaskets; OEM 4V - for #3721, #3723, #3781, and #3783 Manifolds.................................................#3896
EGR Gasket; OEM 2V - for #3721, #3723, #3781, and #3783 Manifolds...................................................#3897
EGR Plate Gasket; OEM 4V - for #3766 Manifold .....................................................................................#3898

TUNING ACCESSORIES

FOR PERFORMER SERIES & THUNDER SERIES AVS CARBS

Choke Cable
Bracket #1494

Q-JET REPLACEMENT KIT

PLEASE REFER TO PAGE 212 FOR MORE INFORMATION REGARDING THE EMISSIONS GUIDE.

20

INDEX

l 50-STATE LEGAL l RACING ONLY l PRE-POLLUTION CONTROLLED VEHICLES l STOCK REPLACEMENT l ENGINE SWAP

SPORTSWEAR

EMISSIONS GUIDE

FUEL PUMPS

Air/Fuel Monitor #6593

This Air/Fuel Monitor displays the actual air/fuel mixture in ratios from approximately 12 to 15:1. Use it to
guide carburetor adjustment and jetting or to improve ignition spark advance curves. Not for use with
leaded fuels or alcohol. Kit includes oxygen sensor, bung, harness, display unit and installation instructions.
Air/Fuel Ratio Monitor.................................................................................................................................#6593
Replacement Oxygen Sensor with 18mm Bung .....................................................................................#3591

NITROUS

AIR/FUEL RATIO MONITOR

ACCESSORIES

Carburetor Rebuild Kit #1477

WATER PUMPS

Quadrajet Adapter & Fuel Line Kit #2697

Float Kit (includes 2 floats, 2 pins and a float setting gauge) .................................................................#1469
Accelerator Pump Assembly for #1400, #1403, #1404, #1405, #1406,
#1801, #1802, #1803, #1804, #1805, #1806, #1825, and #1826 ...................................................................#1470
Accelerator Pump Assembly for #1407, and #1411 l ...........................................................................#1467
Accelerator Pump Assembly for #1412, #1413, #1812, and #1813 l ...................................................#1468
Marine Accelerator Pump (includes seal, spring and cup assembly for #1409/#1410) l.................#1471
Performer Series Linkage Kit (includes 1 ea. of 7 links with gold iridited finish and 6 retaining clips) ....#1473
Choke Cable Bracket & Clamp Assembly (Performer Series & Thunder Series AVS carbs)..........#1494
Choke Cap Kit (includes choke cap and gasket, 3 screws and 3 locking tabs) ..................................#1474
AVS Carb Linkage Kit (includes 1 ea. of 7 links with black finish and 6 retaining clips)....................#1873
Carburetor Rebuild Kit (includes parts & gaskets to rebuild all Edelbrock square-bore carbs) ......#1477
Replacement Fuel Inlet Fitting (5/8"-20, 3/8" nipple, gold iridited) .........................................................#1497
Replacement Needles and Seats (.0935" diameter, pair) .......................................................................#1498

CRATE ENGINES

CARBURETOR MAINTENANCE KITS

EFI

This complete kit includes everything you need to add an Edelbrock

square-bore (Performer or Thunder Series) carburetor to a stock Q-Jet
or Thermo-Quad intake manifold with a spread-bore flange.
Kit includes: Spread bore to square bore adapter plate, 24" fuel hose,
fuel filter, 3/8" adapter fitting, carb studs, gaskets and all of the
necessary hardware for an easy installation.
QuadraJet Adapter and Fuel Line Kit .......................................................................................................#2697

SUPERCHARGERS

Performer Series
Linkage Kit #1473

Idle Compensator
Kit #8059

POWER PACKAGES KITS

Float Kit #1469

CAMSHAFT & VALVETRAIN

Step-Up Spring Assortment #1464

Step-Up Spring Assortment (Includes 3" Hg (blue), 4" Hg (yellow), 5" Hg (orange), 7" Hg (pink)
and 8" Hg (plain) Springs. 5 pair.) l ........................................................................................................#1464
Accelerator Pump Nozzles (Includes .024, .033, .043 nozzles and gaskets.) l ..................................#1475
Off-Road Needles and Seats (Includes a pair of spring loaded needles and .0935" seats.) .............#1465
High Flow Needles and Seats (Includes a pair of needles and .110" seats.) l .................................#1466
EGR Adapter ..................................................................................................................................................#1476
Electric Choke Kit (Includes all parts necessary to convert #1404, #1405, #1407 and #1412 Edelbrock
Performer Series carburetors to electric choke. Not for Thunder Series AVS carburetors.) ............#1478
Chevy/GMC Cruise Control Kit (Required for OEM cruise control hook-up.) ......................................#1484
Idle Mixture Screw Set
(Includes a pair of idle mixture screws and springs for all Edelbrock square-bore carburetors.) ....#1496
Banjo Fitting (3/8" inlet, 5/8"-20) ..................................................................................................................#8089
-6 AN Fitting (5/8" -20) ..................................................................................................................................#8087
Inverted Flare Fitting (for 3/8" tubing, 5/8"-20) ..........................................................................................#8090
Idle Compensator Kit (Maintains correct idle speed when air conditioner is on.
(Includes 12-volt solenoid and mounting bracket for all Edelbrock square-bore carburetors.) ........#8059
QuadraJet Adapter Plate (Adapter for mounting Edelbrock square-bore carbs to stock QuadraJet
and Thermo-Quad manifolds.) .....................................................................................................................#2696

MANIFOLDS GASKETS CYLINDER HEADS

CARBURETOR GASKETS (CONTINUED)

CARBURETORS
CYLINDER HEADS GASKETS MANIFOLDS

For Edelbrock and GM Rochester Q-Jet carbs. Not for computer-controlled carbs.
Primary Metering Rods #1936

Primary Metering Jets #1968

.043" l ............................... #1944

.045" l ............................... #1946

SECONDARY METERING RODS, ALL YEARS (PAIRS)

Dimension indicates tip diameter. Letters are for identification purposes only.
CK (.052") l ................... #1952
CL (.066") l ................... #1954
CC (.030") l ................... #1950
CE (.041") l ................... #1951
AY (.056") l................... #1953
.068" l...#1968
.069" l...#1969

.070" l...#1970
.071" l...#1971

.072" l...#1972
.073" l...#1973

(PAIRS)
.074" l...#1974
.076" l...#1976
.075" l...#1975
.077" l...#1977

SECONDARY METERING ROD HANGERS, ALL YEARS

Figure A - Hanger
Dimension Reference

Number in parenthesis indicates hanger height from rod hole to hanger mounting surface, see Fig. A.
Hanger B (.520") l ... #1960
Hanger V (.615") l.... #1964
Hanger K (.565") l ... #1962
Hanger G (.545") l ... #1961
Hanger P (.590") l ... #1963

ADDITIONAL ACCESSORIES

SUPERCHARGERS
EFI
CRATE ENGINES

.039" l ............................... #1939

.041" l ............................... #1942

PRIMARY METERING JETS, ALL YEARS

Secondary Hanger

#1925

#9178

#1994

#1989

#1984

#1998

Airhorn Gasket Kits (includes 5 gaskets for Edelbrock Q-Jets) #1903, #1904, #1905, #1906 and #1910 ....#1987
#1901................................................................................................................................................................#1989
#1902................................................................................................................................................................#1998
Power Piston Spring Assortment
Power piston springs allow fine tuning of metering rod staging. Includes the following springs:
golden (4" Hg), orange (5" Hg), black (6" Hg), and yellow (8" Hg). ...........................................................#1994
Hardware Kit (includes 2 primary power piston retainers, 5 accelerator pump lever rollpins,
5 choke linkage clips and 3 secondary hanger screws.).........................................................................#1986
Needle and Seat Assembly
High-capacity/high-flow .145" diameter needle and seat assembly. .....................................................#1980
High-Performance Accelerator Pump Plunger and Spring (shorter than standard street plungers,
this pump gives additional pump shot volume.) ........................................................................................#1982
Bolt Kit (for all Q-Jets except #1905)..........................................................................................................#1925

DIRECT REPLACEMENT PHENOLIC FLOATS

WATER PUMPS
ACCESSORIES

(PAIRS)
Single Taper for Q-Jet Model 4MV (1974 & earlier). Dimension indicates maximum diameter of taper.

(PAIRS)
Single Taper for Q-Jet Model M4M (1975 & later) and Edelbrock #1910. Dimension = Maximum dia. of taper.
.048" l ........... #1941
.050" l ........... #1943
.052" l ........... #1945
.054" l ........... #1947

Secondary Metering Rods #1950

For Model M4M and Edelbrock #1910 (1975 and later) .........................................................................#1984
For Model 4MV (1974 and earlier) ..............................................................................................................#1985

Remote Choke Kit #1931

High-Performance
Accelerator Pump
Plunger #1982

FUEL FILTERS

For Q-Jet Models 4MV and Edelbrock #1901 and #1902 .......................................................................#1926
For Q-Jet Models M4M and Edelbrock #1903, #1904, #1905, #1906 and #1910 .................................#1927

REBUILD KITS

Includes all parts and gaskets necessary to rebuild Edelbrock Q-Jet carburetors.
For Edelbrock #1901 and #1902 ..................................................................................................................#1920
For Edelbrock #1903, #1904, #1905 and #1906 ..........................................................................................#1921
For Edelbrock #1910 and M4M Q-Jets (1975 and later) .........................................................................#1990
#1926

#1932

CHOKE KITS

For S/B Chevy Performer Manifolds (divorced choke) ..........................................................................#1931

For Converting Hot Air Choke to Electric Choke ....................................................................................#1932
For S/B Chevy Performer RPM Q-Jet Manifold #7104 (choke rod only) .............................................#9172
For B/B Chevy Performer Manifolds (divorced choke) ..........................................................................#1935
For B/B Chevy Performer RPM Q-Jet Manifold #7164 (choke rod only) .............................................#9178

FUEL PUMPS

NITROUS

PRIMARY METERING RODS

PRIMARY METERING RODS

CHOKE CAPS

SPORTSWEAR
INDEX

Note: Calibration changes may affect emissions-legal status of #1901, #1902, #1903, #1904, #1905 and #1906.

.035" l ............................... #1936

.037" l ............................... #1937

KITS POWER PACKAGES

CAMSHAFT & VALVETRAIN

CARBS Q-JET ACCESSORIES

#1920

21

Choke Caps for Q-Jet #1903........................................................................................................................#1995

Choke Caps for Q-Jet #1904, #1905, #1906 and #1910 ............................................................................#1996

WWW.EDELBROCK.COM

CARBURETORS

FUEL FILTERS &MORE CARBS

SINGLE FEED FOR EDELBROCK PERFORMER SERIES
AND THUNDER SERIES AVS CARBURETORS

Chromed Steel Fuel Kit #8126 with no Fuel Filter

DUAL FEED FOR EDELBROCK

THUNDER SERIES AVS CARBURETORS

EFI
CRATE ENGINES

Dual Feed Fuel Line Kit #8133

Includes an Anodized Aluminum Fuel Filter

Designed for high volume fuel systems these high-quality fuel filters are manufactured of billet aluminum and
offer 40 micron filtration. These filters are 3" long by 1-1/4" in diameter and include a 40 micron disc element
with a -6 AN male inlet/outlet. Match with Edelbrock pump-to-carb fuel line kits for a complete plumbing solution.
Polished Aluminum Filter............................................................................................................................#8129
Blue Anodized Aluminum Filter..................................................................................................................#8130
Black Anodized Aluminum Filter...............................................................................................................#650133
Replacement Filter Element........................................................................................................................#8137
-6 AN Female to Barb (when using push-on fuel line with -6 fuel filter)...............................................#624010

SUPERCHARGERS

HIGH FLOW FUEL FILTERS

POWER PACKAGES KITS

Chrome Steel Single-Feed Fuel Line Kit #8131

with Polished Filter

These dual feed fuel inlets are designed specifically for Edelbrock Thunder Series AVS carburetors.
The drop-down design routes the fuel line on the right-hand (passenger side) of the carburetor below
the linkage and choke housing. Options include a barbed end for a push-on 3/8" fuel line or -6 AN
aluminum fuel filter with a 40 micron filter element. Match with Edelbrock fuel line kit for a complete
fuel pump to carburetor plumbing solution. They are manufactured of chrome plated steel and include
a 5/8" -20 threaded banjo bolt with gaskets.
Chrome Steel Fuel Line with Polished Aluminum Filter (replacement filter only #8129).................#8128
Chrome Steel Fuel Line with No Fuel Filter and 3/8" Barbed End Inlet..............................................#8132
Chrome Steel Fuel Line with Blue Anodized Aluminum Filter (replacement filter only #8130).......#8133
-6 AN Female to Barb (when using push-on fuel line with #8128 and #8133).......................................#624010

CAMSHAFT & VALVETRAIN

These fuel inlets for Edelbrock carburetors provide a clean and custom plumbing solution. The drop-down
design routes the fuel line on the right-hand (passenger side) of the carburetor below the linkage and
choke housing. #8126 and #81263 includes a barbed end for a push-on 3/8" rubber fuel line. #8131, #8134 and
#81343 includes an aluminum fuel filter with a 40 micron filter element and -6 AN male inlet will accept an
Edelbrock fuel line kit for a complete fuel pump to carburetor plumbing solution. They are manufactured of
plated steel and include a 5/8" -20 threaded banjo bolt with gaskets. Available in chrome or black finish.
Chrome Steel Fuel Line with 3/8" Barbed End Inlet and without Fuel Filter...................................... #8126
Black Steel Fuel Line 3/8" Barbed End Inlet and without Fuel Filter................................................... #81263
Chrome Steel Fuel Line with Polished Aluminum Filter (replacement filter only #8129).................. #8131
Chrome Steel Fuel Line with Blue Anodized Aluminum Filter (replacement filter only #8130)........ #8134
Black Steel Fuel Line with Black Anodized Aluminum Filter (replacement filter only #650133)..... #81343
-6 AN Female to Barb (when using push-on fuel line with #8131 and #8134)........................................ #624010

MANIFOLDS GASKETS CYLINDER HEADS

FUEL INLET AND FILTER KITS

WATER PUMPS

Blue anodized
Fuel Filter #8130

Polished
Fuel Filter #8129

-6 AN female to
barb #624010

EMISSIONS GUIDE

PLEASE REFER TO PAGE 212 FOR MORE INFORMATION REGARDING THE EMISSIONS GUIDE.

22

INDEX

l 50-STATE LEGAL l RACING ONLY l PRE-POLLUTION CONTROLLED VEHICLES l STOCK REPLACEMENT l ENGINE SWAP

SPORTSWEAR

Universal Fuel Hose & Filter Kit #8135

Designed for quick installation when retaining part of the stock steel fuel line, simply cut the stock line and
install the compression fitting. Use supplied neoprene hose, clamp and special fuel filter and connect to
carb. Will work with either 5/16" or 3/8" lines. Kit includes fuel filter, special fittings to adapt 5/16" and 3/8"
steel line to 3/8" fuel hose, 24" of 3/8" fuel hose (SAE 30R7) and four stainless steel worm-type hose clamps.
Universal Fuel Hose & Filter Kit.................................................................................................................#8135

FUEL PUMPS

UNIVERSAL FUEL HOSE & FILTER KIT

NITROUS

Black Fuel
Filter #650133

ACCESSORIES

Russell Performance Products is

an Edelbrock Company

CARBURETORS
CYLINDER HEADS GASKETS MANIFOLDS
CAMSHAFT & VALVETRAIN
KITS POWER PACKAGES

FOR ALL EDELBROCK DUAL CARBS

Dual-Quad Fuel Line Kit #8091 with Endura finish

Dual-Quad Fuel Line Kit #80913 with ProClassic Finish

Dual-Feed Fuel Line Kit #8101

CRATE ENGINES

These fuel line kits are temperature, gas and oil resistant. They are made from reinforced synthetic
Chlorinated Polyethylene rubber hose with a nylon inner braid for strength. They feature a 3/8" NPT inlet
fitting and a 1/8" pipe fitting with plug for a fuel pressure gauge. Fuel Line kit #8101 is adjustable between
the carb bowls from 7-1/2" to 11-1/2". Hose nipple not included.
Braided Steel Dual-Feed Fuel Line Kit .....................................................................................................#8101
Dual-Feed Fuel Line Kit with Red and Blue Finish ................................................................................#8105
Dual-Feed Fuel Line Kit with Black Finish..............................................................................................#8106
Dual-Feed Fuel Line Kit with Polished Finish ........................................................................................#8107

FUEL PUMP TO CARB INLET HOSE KITS

FOR EDELBROCK FUEL PUMPS WITH 3/8" OUTLET

Dual-Feed Fuel Line Kit #8105

ProClassic Fuel Hose Kit #81233

These high-quality fuel line kits offer a clean and precise fuel supply line for mechanical fuel pumps with
a 3/8" NPT outlet, when using an Edelbrock Single- or Dual-Feed fuel inlet kit #8128, #8131, #8133 or #8134.
These hose kits are pre-assembled hose with hose ends and are available with stainless steel braided
hose or black nylon fabric ProClassic hose. Carb fuel inlet not included, see page 22 for applications.
Braided Stainless Steel Fuel Hose Kit (for S/B Chevy, S/B Chrysler, and B/B Chrysler) .................#8123
Braided Stainless Steel Fuel Hose Kit (for AMC, B/B Chevy, S/B Ford, 429/460 Ford & Pontiac) .....#8124
Braided Stainless Steel Fuel Hose Kit (for S/B Fords - bottom feed only) .........................................#8125
ProClassic Black Fuel Hose Kit (for S/B Chevy, S/B Chrysler, and B/B Chrysler) .............................#81233
ProClassic Black Fuel Hose Kit (for AMC, B/B Chevy, S/B Ford, 429/460 Ford & Pontiac) ..............#81243

FUEL PUMP TO CARB HOSE KITS

COMPLETE FUEL PUMP TO CARBURETOR FUEL HOSE

ProClassic Fuel Hose & Filter Kit #8102

These high-quality fuel line kits offer a clean and precise fuel supply line for mechanical fuel pumps
with 3/8" NPT to the 5/8" -20 fuel inlet on Edelbrock Performer Series and Thunder Series AVS Carbs.
They are manufactured with Russell ProClassic hose and include fuel filter, 5/8" -20 banjo bolt and gaskets.
Will work with OEM or equivalent fuel pumps.
ProClassic Fuel Hose with Street Fuel Filter..........................................................................................#8102
ProClassic Fuel Hose with Competition Fuel Filter...............................................................................#8103

FUEL DISTRIBUTION BLOCKS

WATER PUMPS
ACCESSORIES

Supplies fuel to two Edelbrock carbs when used on Edelbrock Dual-Quad manifolds. Use with a fuel hose kit
such as our #8122 or #8127. 6-7/16" center-to-center, 1/8"-NPT fuel pressure port and a 3/8"-NPT fuel inlet.
Dual-Quad Fuel Line Kit (Red anodized finish) ........................................................................................#8088
Dual-Quad Fuel Line Kit (Endura finish)....................................................................................................#8091
Dual-Quad Fuel Line Kit (ProClassic finish) .............................................................................................#80913

FOR ALL HOLLEY DUAL-FEED CARBS

FOR DUAL, TRIPLE AND QUAD CARBURETOR SETUPS

Fuel Block #1280

Fuel Block #1285

SPORTSWEAR

Fuel Block #1290

INDEX

FUEL PUMPS

NITROUS

FUEL HOSE KITS, FUEL LINE KITS

& FUEL DISTRIBUTION BLOCKS

DUAL-QUAD FUEL HOSE KIT

EFI

SUPERCHARGERS

CARBS

23

Fuel Block #12801

Fuel Block #12851

Fuel Block #12901

Edelbrock has reintroduced the vintage cast aluminum fuel blocks for dual, triple
and quad carb applications for your hot rod or custom vehicle. Edelbrock fire wall
mounted fuel blocks feature a single 3/8" NPT inlet and two, three or four 1/4" NPT
outlets, depending on application. Each fuel block has four holes for mounting to
a fire wall and are available with a satin aluminum or polished finish.
The Edelbrock Mini Fuel Block #1286 was first introduced in the late 50s and
is a great solution for any dual or triple carb application where no mounting
surface is available. It features a single 1/4" inlet with three 1/4" outlets with
a polished finish and period correct Edelbrock logo decal. See page 17 for
Mini Fuel Distribution Kit #1281 this kit includes everything needed to plumb
Mini Fuel Block #1286
a dual or triple carb setup. All of them are a great way to finish off your
Edelbrock 94 carburetor and intake manifold installation!
Satin
Polished
Dual Outlet Fuel Block ..................................................................................................#1280 ...................#12801
Triple Outlet Fuel Block ................................................................................................#1285 ...................#12851
Quad Outlet Fuel Block .................................................................................................#1290 ...................#12901
Mini Triple Outlet Fuel Block .........................................................................................N/A ...................#1286
Important Note: Triple fuel blocks can also be used with any dual carb installation by blocking off the unused outlet with
pipe plug #662043 or any similar 1/4" -18 NPT plug. The third outlet can also be run to fuel pressure gauge if desired.

WWW.EDELBROCK.COM

CARBURETORS

SERVICE PARTS & ACCESSORIES CARBS

FOR DEMON , HOLLEY & QUICK FUEL CARBURETORS

Edelbrock now offers replacement service parts for popular high performance Quick Fuel, Holley
and Demon carburetors. These component packages will feature quick reference guides for easy
identification and proper application selection. See complete list below for these items and contact your
distributor for availability and pricing. Dont leave your customers with empty shelves.

MAINTENANCE KITS
#12750

For use with most 4160-Style Models ......................................................................................................#12750

For use with most 4150-Style Models ......................................................................................................#12760

GASKETS

ACCELERATOR PUMPS

Diaphragm (30cc) .............................................................................................................................................#12400

Diaphragm (50cc) .............................................................................................................................................#12401
Pump Cam Assortment Kit (includes 8 cams for Holley 2300, 4150 and 4160 Series carburetors)....#12403
#12760

Vacuum Secondary Diaphragm (rod Length: 2.054") .................................................................................#12404

Vacuum Secondary Spring Kit (includes 7 springs that will fit on
Holley 4150, 4150HP, 4160 series and various Demon carburetors) ........................................................#12412

THROTTLE CABLE PLATE KITS

Carb Throttle Ball Assortment ...................................................................................................................#12413

Transmission Kick Down Stud ..................................................................................................................#12414

#12600

These needle and seat assemblies will fit carburetors with center hung fuel bowls and can be used as
replacements or performance upgrades. Kit includes needle and seat assembly, two gaskets and one O-ring.
For use with Holley 2300, 4150, 4160, 4165, 4175 and 4500 Series, Quick Fuel 4500, Professional Series and
Q-Series, as well as various Demon carburetors.
Adjustable Inlet Needle with Viton Tip 0.097". ....................................................................................#12602
NonAdjustable Inlet Needle with Viton Tip 0.110" ...........................................................................#12605
Hardware Kit (fits Holley carburetors with center hung fuel bowls) ..................................................#12600

STANDARD MAIN JETS

Jet #

Size Part No.

#12455
#12456
#12457
#12458
#12459
#12460
#12461
#12462

Jet #

0.054"
0.055"
0.056"
0.057"
0.058"
0.059"
0.060"
0.061"

63
64
65
66
67
68
69
70

Size Part No.

0.062" #12463
0.064" #12464
0.065" #12465
0.066" #12466
0.068" #12467
0.069" #12468
0.070" #12469
0.073" #12470

Jet #
71
72
73
74
75
76
77
78

Size Part No.

0.076" #12471
0.079" #12472
0.079" #12473
0.081" #12474
0.082" #12475
0.084" #12476
0.077" #12477
0.078" #12478

Jet #
79
80
81
82
83
84
85

Size Part No.

0.079" #12479
0.080" #12480
0.081" #12481
0.082" #12482
0.083" #12483
0.084" #12484
0.085" #12485

SINGLE-STAGE POWER VALVES

#12635

#12624

EMISSIONS GUIDE

Holley is a registered trademark of Holley Performance Products

Demon is a registered trademark of Demon Fuel Systems, Inc.
Quick Fuel is a registered trademark of Quick Fuel Technology, Inc.

Viton is a registered trademark of Dupont Performance Elastomers

All other trademarks are property of their respective owners.

PLEASE REFER TO PAGE 212 FOR MORE INFORMATION REGARDING THE EMISSIONS GUIDE.

24

INDEX

l 50-STATE LEGAL l RACING ONLY l PRE-POLLUTION CONTROLLED VEHICLES l STOCK REPLACEMENT l ENGINE SWAP

SPORTSWEAR

#12457

FUEL PUMPS

#12404

Standard Flow 2.5 in. Hg .............................................................................................................................#12625

Standard Flow 3.5 in. Hg ............................................................................................................................#12635
Standard Flow 4.5 in. Hg .............................................................................................................................#12645
Standard Flow 5.5 in. Hg .............................................................................................................................#12655
Standard Flow 6.5 in. Hg ............................................................................................................................#12665
Standard Flow 8.5 in. Hg .............................................................................................................................#12685
Power Valve Plug & Gasket
(fits any Demon, Holley and Quick Fuel carburetors with a 1/2" x 28 power valve thread).............#12624

NITROUS

55
56
57
58
59
60
61
62

ACCESSORIES

#12605

#12416

NEEDLE AND SEATS

WATER PUMPS

#12415

#12401

This is a straight male 7/8"-20 with inverted 5/8"-18 female flare and a 3/8" tube size. Fits the following
carburetors; Holley 2300, 4150, 4150HP, 4160 (center hung floats only), 4500, 4500 HP and Rochester
Quadrajet applications up to 1974.
Fuel Bowl Inverted Flare Fitting ................................................................................................................#12415
Transfer Tube O-Rings (qty. 2, will fit Holley 4150, 4160, 4165 & 4175 Series carburetors).................#12416

CRATE ENGINES

#12400

#12403

EFI

#12370

SUPERCHARGERS

FUEL FITTINGS

POWER PACKAGES KITS

VACUUM SECONDARY PARTS

CAMSHAFT & VALVETRAIN

Metering Block & Fuel Bowl for 2300, 4150, 4160, 4165 and some 4500 Series (qty. 2 each) ..........#12370
Metering Block Assortment for 4160 ...........................................................................................................#12371
Metering Block for 4150 & 4160 (qty. 2) .......................................................................................................#12380
Fuel Bowl for 2300, 4150, 4160, 4175 & 4500 Series (qty. 2) .....................................................................#12382
Carb Mounting Heat Insulator Gasket Kit (includes studs).....................................................................#12410

MANIFOLDS GASKETS CYLINDER HEADS

PERFORMANCE CARBURETOR
SERVICE PARTS AND ACCESSORIES

CARBURETORS
CYLINDER HEADS GASKETS MANIFOLDS
CAMSHAFT & VALVETRAIN

#2691

#2692

#2694

#2693

#8716

#2696

#2731

#2732

#8715

#8725

EFI
CRATE ENGINES
WATER PUMPS

Spread-Bore Adapter Plate (.100" thick) l

Adapts spread-bore carbs to Edelbrock manifolds without regular mounting flange.
(for Edelbrock manifolds only) .....................................................................................................................#2731
Square-Bore to Spread-Bore Adapter Plate (.100" thick)
Mounts square-bore carbs to spread-bore carb pad on Edelbrock intakes.
(for Edelbrock manifolds only except #2101 & #3701) ..............................................................................#2732

2-BARREL CARBURETOR SPACERS

This is a 1/4" heat insulator spacer kit for
Edelbrock 94 Series and Stromberg 97
3-bolt carburetors. The black wood laminate
fiber spacer is ideal for reducing heat transfer
from the intake manifold to the carburetor.
Includes all necessary hardware for a
complete installation.
Heat Insulator Spacer for Edelbrock 94
and Stromberg 97 Carburetors l ...............#8751

Heat Insulator Spacer #8751

4-BARREL CARBURETOR SPACERS

#8722

#8723

ACCESSORIES
NITROUS

Carb adapters allow proper installation of carb-to-manifold. Number in parenthesis is thickness of adapter.
4-bbl. Thermo-Quad Adapter (.750") l
Mounts 4-bbl. Carter Thermo-Quad carburetors to square-bore, single-plane manifolds. ................#2691
4-bbl. Quadrajet Adapter (.750") l
Mounts 4-bbl. Rochester Quadrajet carburetors to square-bore, single-plane manifolds.................#2692
Standard-Flange Sideways Adapters (pair, .550") l
Mounts standard-flange Holley carbs sideways on Tunnel Rams.........................................................#2694
Four-Hole, Square-Bore to Spread-Bore Adapter (.850") l
Mounts Edelbrock square-bore carbs to stock Quadrajet & Thermo-Quad manifolds.......................#2696
Standard-Flange Adapter (2.00") l
Adapts 4500 Series manifold flange to 4150 Series standard-flange carburetor. ................................#8716
Competition Q-Jet Adapter (.750") l
Re-locates Q-Jet 5/16" to the rear for improved fuel distribution
on square-bore single plane manifolds. .....................................................................................................#2693

CARBURETOR ADAPTER PLATES

#8710

#8717

#8720

#8713

FUEL PUMPS
SPORTSWEAR
INDEX

ADAPTERS AND SPACERS

CARBURETOR ADAPTERS

SUPERCHARGERS

KITS POWER PACKAGES

CARBS

25

Use open spacers where more plenum volume or more carb-to-plenum floor distance is required.
4-hole spacers enhance low-rpm torque and throttle response and dampen reversion effects on the carb.
The superior heat insulating properties of wood fiber laminate are ideal for reducing heat transfer to the carb.
1/2" Open Spacer, Wood Fiber Laminate l ............................................................................................#8724
1/2" Performer Divided-Wall Spacer, for Two-Plane Manifolds l ...................................................#8715
1/2" Divided Spacer, Wood Fiber Laminate l .......................................................................................#8725
1/2" Divided Spacer, Wood Fiber Laminate l
Includes dual bolt pattern for Edelbrock carbs on single and dual-quad manifolds.
Will not fit universal #2101 style carb pads................................................................................................#8722
1/2" 4-Hole Spacer, Wood Fiber Laminate l
Includes dual bolt pattern for Edelbrock carbs on single and dual-quad manifolds.
Will not fit universal #2101 style carb pads................................................................................................#8723
3/4" Open Spacer, Wood Fiber Laminate l ............................................................................................#8719
3/4" 4-Hole Q-Jet Spacer, Wood Fiber Laminate; replacement for #1905 l .....................................#8726
1" Open Spacer, Black Phenolic Plastic l ............................................................................................#8710
1" 4-Hole Spacer, Black Phenolic Plastic l..........................................................................................#8711
1" Open Spacer for Holley 4500 Series l ...............................................................................................#8717
1" Open Spacer, Wood Fiber Laminate l ...............................................................................................#8720
1" Open Cloverleaf Spacer for Holley 4500 Series; fits 2937, 2965, 2956, 2970 & 2971 only l ......#8718
1" Performer Divided-Wall Spacer, for Two-Plane Manifolds l ......................................................#8714
2" Open Spacer, Black Phenolic Plastic l ............................................................................................#8712
2" 4-Hole Spacer, Black Phenolic Plastic l..........................................................................................#8713

WWW.EDELBROCK.COM

CARBURETORS

INSTALL COMPONENTS CARBS

#8035

#8057

Small-Block Chevy EGR Adapter for #3701 Manifold (1973-74 only) l...............................................#8035
Ford EGR Adapter Kit OEM 4V (#3896 included) l.............................................................................#8017
Ford 2V EGR Plate (1" tall) l........................................................................................................................#8057
Ford 4V EGR Plate (1" tall; except 429/460) l............................................................................................#8053
Ford Replacement EGR Gaskets OEM 4V (for #3721, #3723, #3781, and #3783 manifolds)...........#3896
Ford Replacement EGR Gasket OEM 2V (for #3721, #3723, #3781, and #3783 manifolds).............#3897
Ford EGR Plate Gasket OEM 4V (for 79-87 460 #3766)........................................................................#3898

#3896

#3897

#3898

CARB STUDS AND FITTINGS

#8017

EFI

#8024

#8087

#8089

DIVORCED CHOKE RODS FOR GM CARBS

Automatic Divorced Choke Rod for #2101, #2104 & #3701 with Q-Jet Carburetor............................#9171
Automatic Divorced Choke Rod for #7104 with Q-Jet Carburetor.......................................................#9172
Automatic Divorced Choke Rod for #7164 with Q-Jet Carburetor.......................................................#9178
Automatic Divorced Choke Rod for #2161 & #3761 with Q-Jet Carburetor........................................#9179

WATER PUMPS

#4804

#8081

CRATE ENGINES

#8096

#8090

SUPERCHARGERS

#8008

POWER PACKAGES KITS

Zinc
Black
Carb Stud, Nut and Washer Kit (5/16"-18 x 1-1/4")......................................................#8006......................N/A
Carb Stud, Nut and Washer Kit (5/16"-18 x 1-1/2")......................................................#8008....................#8079
Carb Stud, Nut and Washer Kit (5/16"-18 x 1-3/4")......................................................#8024......................N/A
Bullet Nosed Carb Stud, Nut and Washer Kit (5/16"-18 x 1-1/2").............................N/A.......................#8056
Bullet Nosed Carb Stud, Nut and Washer Kit (5/16"-18 x 2")....................................N/A.......................#8060
Vacuum Fitting (low profile) for Holley Double-Pumper when used
with 3/8" male x 1/8" female NPT fitting with #2101, #5001, #7101 (.650").................................................#8096
Vacuum Caps (1/8", 3/16", 1/4", 5/16" and 3/8", Set of 20)...............................................................................#4804
Single Barb Carb Fitting (1/4"-18 NPT x 3/8" Barb).......................................................................................#8080
#6 AN Fitting for Rochester 2-barrel Carburetor ....................................................................................#8081
#6 AN Fitting for Edelbrock Square-Bore & Carter AFB Carbs (5/8"-20).............................................#8087
Banjo Fitting for Edelbrock Square-Bore & Carter AFB Carbs (5/8"-20).............................................#8089
Inverted Flare Fuel Line Fitting for Edelbrock Square-Bore & AFB Carbs (3/8")...............................#8090

CAMSHAFT & VALVETRAIN

#8053

MANIFOLDS GASKETS CYLINDER HEADS

EGR ADAPTERS AND PLATES

ACCESSORIES

#9172

#9178

#9179

EMISSIONS GUIDE

PLEASE REFER TO PAGE 212 FOR MORE INFORMATION REGARDING THE EMISSIONS GUIDE.

26

INDEX

l 50-STATE LEGAL l RACING ONLY l PRE-POLLUTION CONTROLLED VEHICLES l STOCK REPLACEMENT l ENGINE SWAP

SPORTSWEAR

Quadrajet Adapter & Fuel Line Kit #2697

This complete kit includes everything you need to add an Edelbrock

square-bore (Performer or Thunder Series) carburetor to a stock
Q-Jet or Thermo-Quad intake manifold with a spread-bore flange.
Kit includes: Spread bore to square bore adapter plate, 24" fuel hose,
fuel filter, 3/8" adapter fitting, carb studs, gaskets and all of the necessary
hardware for an easy installation.
QuadraJet Adapter and Fuel Line Kit........................................................................................................#2697

FUEL PUMPS

Q-JET REPLACEMENT KIT

NITROUS

#9171

CARBURETORS
CYLINDER HEADS GASKETS MANIFOLDS
CAMSHAFT & VALVETRAIN
KITS POWER PACKAGES
SUPERCHARGERS
EFI
CRATE ENGINES

#8003

#8004

#8011

#8020

#8018

#8022

#8007

#8009

#8012

#8014

#8015

#8016

#8034

#8029

Automatic Trans. Rod Extension Kit for 1/4" Rod for Chrysler.............................................................#8003
Automatic Trans. Rod Extension Kit for 5/16" Rod for Chrysler...........................................................#8004
Automatic Trans. Rod Extension Kit for Ford ..........................................................................................#8011
Automatic Trans. Kickdown Lever Kit for Chevy (early Holley Double-Pumper) ..............................#8020
Automatic Trans. Kickdown Stud for 1982 & later TH350 ....................................................................#8018
Trans. Kick-Down Linkage Adapter Kit for 1977 Chrysler Vans..........................................................#8022
Throttle & Automatic Trans. Shoulder Stud Kit for Early Chrysler .....................................................#8007
Throttle Cable Adapter for Chevy (1977 & later) .....................................................................................#8009
Universal Throttle Rod Extension Kit (7-1/2" long)..................................................................................#8010
Throttle or Automatic Trans. Cable Extension Kit for Chevy ...............................................................#8012
Throttle Bracket for #2156 & #5056 for Pontiac (1972-76, supplied w/manifolds) ..............................#8014
Throttle Bracket for Pontiac (1968-71) .....................................................................................................#8015
Ball End Stud for Holley Carbs ..................................................................................................................#8016
Throttle Bracket for Performer 454 T.B.I. #3764 (1987-90) .....................................................................#8019*
Universal Throttle Return Kit .....................................................................................................................#8005
GM Transmission Cable Adapter (For use with 2004R, 700R4, 4L60 transmissions) ..........................#8026
AMC Throttle Cable Adapter (1979 and later) ..........................................................................................#8034
Throttle & Automatic Trans. Kickdown Lever Kit for Chrysler (early Holley Double-Pumper).......#8021
LS1 Throttle and Trans Bracket (for carbureted applications) .............................................................#8029
Throttle, Cruise Control & Trans. Kick-Down Mounting Bracket for Small-Block Chevy
(1978 & earlier with TH350, 2004R, or 700R4 trans. Chrome Plated) .......................................................#8030
Throttle, Cruise Control & Trans. Kick-Down Mounting Bracket Cad. for Small-Block Chevy
(1978 & earlier with TH350, 2004R, or 700R4 trans. Gold Plated).............................................................#8036
Throttle Solenoid and Bracket (for all Edelbrock Square-Bore carbs) ...............................................#8059
Throttle Rod Shoulder Stud for Chevy .....................................................................................................#9141
Universal Throttle Bracket for Small-Block and Big-Block Chevys .................................................#8031
Universal Throttle Bracket for Small-Block Chevy Vortec/E-Tec
(black powder coated and adjustable to fit both EFI and standard intake manifolds. Part #8032 is uniquely
designed for maximum adjustability on any small-block Chevy Vortec style manifold. Will also work with
Edelbrock Performer #2114.)..............................................................................................................................#8032

#8005

#8010

Cable Adapter #8026 installed

#8026

#8021

#8019

#8031

#8036

#8032

#9141

INDEX

SPORTSWEAR

FUEL PUMPS

NITROUS

INSTALL COMPONENTS

THROTTLE BRACKETS AND HARDWARE

ACCESSORIES

WATER PUMPS

CARBS

#8059

27

#8030
* Available while supplies last

WWW.EDELBROCK.COM

CARBURETORS

MANIFOLD SELECTION
SELECTING THE RIGHT MANIFOLD

THE FIRST STEP TO MAXIMUM PERFORMANCE

Edelbrock has several styles of aluminum intake manifolds to fit different applications. Each style of
manifold has characteristics that make it ideal for the application for which it is intended. Years of design
and testing in the area of induction technology have given the Edelbrock team invaluable insights into
which characteristics work best under what conditions. For the ultimate in quality, every Edelbrock
manifold is cast at the ultramodern Edelbrock Aluminum Foundry and machined on computerized machining
centers at Edelbrock headquarters. Whether youre building a daily driver, ultra high-performance street
machine or race car, an Edelbrock intake manifold will provide the power right where you want it.

PERFORMER MANIFOLDS (IDLE TO 5500 RPM)

PERFORMER RPM MANIFOLDS (1500 TO 6500 RPM)

Performer RPM Power from 1500-6500 rpm

PERFORMER AIR-GAP AND RPM AIR-GAP MANIFOLDS

VICTOR SERIES MANIFOLDS (3500 TO 8500+ RPM)

PRO-FLO XT INTAKE MANIFOLDS

ACCESSORIES

Victor Series Power from 3500-8500+ rpm

The Pro-Flo XT intakes are engineered with a large plenum and long tapered runners to deliver maximum
horsepower and broad torque throughout the rpm range (1500-7000 rpm). Aesthetics were also a major
consideration in the design, offering enthusiasts custom looks and a choice of satin aluminum or black
powder coated finish with contrast machining. Pro-Flo XT EFI intakes accept Edelbrock Pro-Flo XT Throttle
Bodies and Fuel Rails (sold separately).

WATER PUMPS

These manifolds continue the Edelbrock tradition of enhanced engine breathing and balanced cylinder-tocylinder air/fuel distribution for improved performance, driveability and economy. Performer manifolds for fuel
injected engines are street legal stock replacements for Ford, GM and Honda. In addition to these street legal
manifolds, Edelbrock has a complete selection of multi-point fuel injection conversion systems for Ford, GM,
Chrysler, Pontiac, AMC and Jeep. You can preview all Pro-Flo 2 and Pro-Flo XT EFI systems on pages 159-164.

CRATE ENGINES

FUEL INJECTION MANIFOLDS

EFI

RPM Air-Gap Power from 1500-6500 rpm

Single-plane, high-rise intakes designed for maximum race-winning power at higher engine speeds.
Edelbrock engineers work in conjunction with leading engine builders from all forms of competition
to design manifolds compatible with the latest technology. Victor manifolds are available for single
or multiple-carburetor set-ups. See individual listings for complete information.

SUPERCHARGERS

This award-winning design incorporates the same race-winning technology thats been used on our
Victor Series competition intakes for decades. The Air-Gap design features an open air space that
separates the runners from the hot engine oil, resulting in a cooler, denser charge for more power.
RPM Air-Gap manifolds are modeled after Performer RPM intakes for high performance street power
from 1500-6500 rpm and Performer Air-Gap manifolds are ideal for street performance from idle-5500 rpm.

POWER PACKAGES KITS

Performer RPMs are dual-plane, high-rise intakes with a 180 firing order to produce incredible top-end
horsepower while retaining good throttle response. Their larger plenums and runners match the freeflowing exhaust, high-lift cams and other modifications of a high output engine. They are intended for
high-performance street or competition engines that run up to 6500 rpm. Edelbrocks Performer RPM
gives you the ultimate in street high-performance.

CAMSHAFT & VALVETRAIN

Performer Power from Idle to 5500 rpm

Performer manifolds are dual-plane, low-rise intake manifolds with a 180 firing order and patented runner
design that you wont find in other brands. This patented design greatly improves torque over a wide rpm
range for excellent throttle response, especially off-idle through the mid-range. The Performers are ideal
for passenger cars, trucks, 4x4s, tow vehicles and RVs. There are EGR and non-EGR versions available for
most domestic V8 and some V6 engines.

MANIFOLDS GASKETS CYLINDER HEADS

Edelbrock intake
manifolds are
manufactured in the USA
for unsurpassed quality.

NITROUS
FUEL PUMPS

Performer EFI Manifold #3704

EMISSIONS GUIDE

PLEASE REFER TO PAGE 212 FOR MORE INFORMATION REGARDING THE EMISSIONS GUIDE.

28

INDEX

l 50-STATE LEGAL l RACING ONLY l PRE-POLLUTION CONTROLLED VEHICLES l STOCK REPLACEMENT l ENGINE SWAP

Pro-Flo XT
Power from 1500-7000 rpm

SPORTSWEAR

The Ford
Performer 5.0
RPM II for Fuel
Injection with
a Black Powder
Coated Finish

CARBURETORS

EDELBROCK INTAKE MANIFOLD INSTALLATION KITS

We have packaged all the necessary components to replace your stock iron intake manifold. These kits include
an Edelbrock aluminum intake manifold, intake gasket set, carburetor base gasket, RTV sealant, intake bolts
and carburetor studs for an all-in-one-box installation for your street rod or muscle car. Get better performance
from a simple manifold replacement kit. See manifold dimensions on pages 81-82 for more information.
Small-Block Chevy Performer EPS Manifold Installation Kit (1957-86, satin finish) l...................#2040
Small-Block Chevy Performer RPM Manifold Installation Kit (1957-86, satin finish) l .................#2041
Small-Block Chevy Performer RPM Air-Gap Manifold Installation Kit (1957-86, satin finish) l ..#2042
MANIFOLD INSTALLATION KITS INCLUDE

Manifold Installation Kit #2040

Intake
Gasket
#7201
#7201
#7201

Intake
Bolt Kit
#8504
#8504
#8504

Carb
Stud Kit
#8008
#8008
#8008

Carb
Base Gasket
Included
Included
Included

RTV
Sealant
Included
Included
Included

Due to the overwhelming demand for our black powder coated accessories we are now offering our most
popular intake manifolds with this Edelbrock exclusive finish. These intake manifolds will feature a finely
textured finish with machine-highlighted logos. This unique finish will also give your intake manifold a protective
layer that will keep it looking great for many years. Match your intake manifold with our black air cleaners,
valve covers, carburetors and water pumps for a complete new and unique look for your engine.

SMALL-BLOCK CHEVY

EFI

SUPERCHARGERS

Performer EPS
Manifold #27014
with EnduraShine

Performer EPS (1986-Earlier 262-400) l ..........#27013

Performer EPS (1986-Earlier 262-400
with Oil Fill Tube) l .............................................#27033
Performer EPS Vortec (non-EGR) l.................#27163
Performer (1987-95 262-400) l ..........................#21043
Performer Air Gap (1955-86 262-400) .................#26013
Performer Vortec (1996-Later 262-400) l ........#21163
Performer RPM (1955-86 262-400) l ................#71013
RPM Air-Gap (1955-86 262-400) l ....................#75013
Performer RPM Vortec (1996-Later 262-400) l ......#71163
RPM Air-Gap Vortec (non-EGR) l ....................#75163

CRATE ENGINES

BIG-BLOCK CHEVY

Polished RPM
Air-Gap Manifold
#75011

Performer 2-O (396-502) l .................................#21613

RPM Air-Gap 2-O (396-502) l ...........................#75613

CHRYSLER

SMALL-BLOCK FORD

Performer (260-289-302) l .................................#21213

Performer RPM (289-302) l ..............................#71213
RPM Air-Gap (289-302) l ..................................#75213
Performer (351W) l............................................#21813
Performer (400 for 1971-82 400 and
1975-82 351M) l ..................................................#21713

BIG-BLOCK FORD

Performer FE 390 (332-352-360-390406-410-427-428) l ..............................................#21053

Performer RPM FE (332-352-360-390406-410-427-428) l ..............................................#71053
Performer 460 (429/460) l .................................#21663

PONTIAC

Performer (326/455) l.........................................#21563

WATER PUMPS

Performer (318/360) l.........................................#21763

RPM Air-Gap (340/360) l ...................................#75763
Performer RPM (440) l ......................................#71933

FOUR FINISHES AVAILABLE

ACCESSORIES

ENDURASHINE FINISH
Black powder coated
Performer EPS
Manifold #27013

Long lasting bright chrome like finish that matches chrome and polished accessories
3-step Vacuum Metalizing Process includes: base coat, aluminum coat
and clear top coat for lasting durability
Low maintenance, cleans easily with soap and water
5-digit part numbers ending in 4 signify EnduraShine Finish

NITROUS

POLISHED FINISH

FUEL PUMPS

Available for select manifold applications - see item listings

Buffed aluminum for a brilliant shine and classic looks
5-digit part numbers ending in 1 signify Polished Finish

BLACK POWDER COATED FINISH

Satin
Performer 289
Manifold #2121

SPORTSWEAR
INDEX

Kit Part #
#2040
#2041
#2042

Intake
Manifold
#2701
#7101
#7501

EDELBROCK INTAKE MANIFOLDS

WITH BLACK POWDER COATED FINISH

KITS POWER PACKAGES

CAMSHAFT & VALVETRAIN

CYLINDER HEADS GASKETS MANIFOLDS

MANIFOLD SELECTION

Available for some manifold applications - see item listings

Durable powder coating for long lasting protection and a distinctive look
5-digit part numbers ending in 3 signify Black Powder Coated Finish

SATIN ALUMINUM FINISH

Available for all manifolds

The traditional look of performance for decades

29

WWW.EDELBROCK.COM

CARBURETORS

MARINE AND NITROUS MANIFOLDS

Marine Intake Manifold #2516 for S/B Chevy Vortec

Now you can get legendary Edelbrock intake manifold performance designed specifically for demanding
marine applications. These marine intake manifolds feature a brass lined front water crossover and two
brass flange inserts to cover the rear water openings in the cylinder heads. The brass lined crossover
and inserts protect the aluminum from salt water corrosion.
#2516 is designed for use with 262-400 c.i.d. Chevy V8 marine engines with 1996-later Vortec (L31)
cast iron heads. Accepts square-bore and spread-bore carbs. Requires Edelbrock bolt kit #8516
and electric choke carb. Recommended intake gasket: Edelbrock #7235.
Marine Intake Manifold for 1996-Later Chevrolet 262-400 with Vortec Heads l ...........................#2516

#2561 is ideal for 396-502 c.i.d. Chevrolet V8s with oval-port cylinder heads. Has no provisions for exhaust
heated chokes. Accepts square-bore and spread-bore carbs. Recommended intake gasket: Edelbrock #7203.
Marine Intake Manifold for Chevrolet 396-502 l..................................................................................#2561

CAMSHAFT & VALVETRAIN

#2504 and #2506 are for use with 1955-95 262-400 c.i.d. Chevrolet V8s with spread-bore (Q-Jet) or square-bore
carbs. It delivers maximum power and a broad torque curve for high-performance marine applications. Carb
pad will accept square-bore carbs without adapters. Recommended intake gasket: Edelbrock #7201.
Marine Intake Manifold for 1955-86 Chevrolet 262-400 l .....................................................................#2504
Marine Intake Manifold for 1987-95 Chevrolet 262-400 l ......................................................................#2506

MANIFOLDS GASKETS CYLINDER HEADS

INTAKE MANIFOLDS
FOR MARINE APPLICATIONS

POWER PACKAGES KITS

SUPERCHARGERS

#2516
Bottom Shown

EFI
CRATE ENGINES

READY TO BOLT-ON, RIGHT-OUT-OF-THE-BOX!

30

INDEX

PLEASE REFER TO PAGE 212 FOR MORE INFORMATION REGARDING THE EMISSIONS GUIDE.

SPORTSWEAR

l 50-STATE LEGAL l RACING ONLY l PRE-POLLUTION CONTROLLED VEHICLES l STOCK REPLACEMENT l ENGINE SWAP

FUEL PUMPS

EMISSIONS GUIDE

NITROUS

Are you looking to build a nitrous system for your high performance vehicle, but dont have the time or
expertise to plumb an intake manifold? Now you can buy a high quality Edelbrock intake manifold with
a direct port nitrous system pre-assembled and ready to install right out of the box. These pre-plumbed
intakes are capable of delivering an additional 250+HP and are supplied with jetting for 100 and 150
horsepower levels. These systems are compatible with any 4150 flange carburetor. They include an
Edelbrock Victor Jr. intake manifold, Performer Series fuel and nitrous solenoids, distribution blocks and
high flow lines with E2 Series nozzles. All the supply hard lines have been plumbed to deliver optimal
nitrous and fuel flow on various applications. These systems do not include the bottle or supply lines.
Visit www.edelbrock.com to see a complete listing of nitrous accessories to finish off your installation.
Victor Jr. for Chevrolet 262-400 Small-Block l ...................................................................................#72975
Super Victor for Chevrolet 262-400 Small-Block l .............................................................................#72925
Victor Jr. 454-R for Chevrolet 396-502 l ................................................................................................#72902

ACCESSORIES

Manifold Kit #72975

fully assembled

INTAKE MANIFOLDS WITH PRE-ASSEMBLED

DIRECT PORT NITROUS SYSTEM

WATER PUMPS

Pre-Assembled Manifold Kit

#72975 for Small-Block Chevy

CARBURETORS
CYLINDER HEADS GASKETS MANIFOLDS

MANIFOLDS

AMC AND BUICK

AMC/JEEP 290-401 V8

PERFORMER AMC (IDLE-5500 RPM)

Designed for 1970-91 street 304-360-401 c.i.d. V8 engines.

Will not accept stock Motorcraft spread-bore carburetor.
Available with or without EGR.
Performer AMC (non-EGR) l .......................... #2131
Performer AMC (EGR) l .................................. #3731

CAMSHAFT & VALVETRAIN

Performer AMC #2131

Carburetor Recommendations: Requires #8008 or #8024 stud, nut &

washer kit. OEM 4-bbl. non-EGR square-bore carb Edelbrock Thunder
Series AVS or Performer Series carb, 500-650 cfm (see pages 13-15).
Installation Notes: Manifolds have two center bolt holes offset.
Recommended intake gasket: Edelbrock #7213 or Fel-Pro MS96011.
#2131/#3731 must use factory style metal valley tray. Manifold height:
A-4.20", B-5.50"; Carb pad height: 4.85" (see pages 81-82). Port exit dimensions: 1.03" x 2.07". Bracket #8034 required for
1979 and later vehicles. Camshaft Recommendations: Performer Plus #2132. See pages 121-122 for specifications.

RPM AIR-GAP AMC (1500-6500 RPM)

KITS POWER PACKAGES

RPM Air-Gap #7531

Designed for 1970-91 304-401 c.i.d. and 1967-69 290-390 c.i.d. V8's, RPM Air-Gaps incorporate the same
race-winning technology as our Victor Series competition intakes. The air-gap design features an open
air space that separates the runners from the hot engine oil for a cooler, denser charge and more power.
For square-bore carbs. Includes standard oil fill and PCV provisions as well as early air conditioning
support bracket accessory bosses. No provision for exhaust-heated chokes. No exhaust crossover.
RPM Air-Gap AMC (non-EGR, for 1967-69 290-390 c.i.d.) l...................................................................#7530
RPM Air-Gap AMC (non-EGR, for 1970-91 304-401 c.i.d.) l...................................................................#7531
Carburetor Recommendations: Edelbrock Thunder Series AVS or Performer Series carb, 600-800 cfm (see pages 13-15).
Installation Notes: Recommended intake gasket: #7213 or Fel-Pro MS96011. #7531 must use factory style metal valley
tray. #7531 has two center bolt holes offset. Manifold height: A-4.45", B-5.77"; Carb pad height: 5.11" (see pages 81-82).
Port exit dimensions: 1.04" x 2.10". Bracket #8034 required for 1979 and later vehicles.
Camshaft Recommendations: Performer RPM #7132. See pages 121-122 for specifications.

SUPERCHARGERS

TORKER AMC (3500-7500 RPM)

Designed for street and race 360-390-401 c.i.d. V8 engines. Manifold not equipped with EGR.
Manifold will not accept stock Motorcraft spread-bore carburetor. Not recommended for 290 or 304 V8's.
Includes standard oil fill and PCV provisions.
Torker AMC 1970-91 (non-EGR) l .............................................................................................................#2930

CRATE ENGINES

EFI

Carburetor Recommendations for High-Performance or Competition:

Edelbrock Thunder Series AVS or Performer Series carb, 750-800 cfm (see pages 13-15).
Installation Notes: #2930 has two center bolt holes offset. Recommended intake gasket: #7213 and Fel-Pro MS96011.
#2930 must use factory style metal valley tray. Manifold height: A-4.45", B-5.38"; Carb pad height: 4.91" (see pages 81-82).
Port exit dimensions: 2.15" x 1.04". Bracket #8034 required for 1979 and later vehicles.

BUICK 231 V6 EVEN FIRE

Designed for 1979 and later street 231/252 c.i.d. (252 c.i.d. 1980-84
only) Buick V6 engines with late-model cylinder heads. Manifold
will not fit pre-1979 engines.
Manifold not equipped with EGR. Not compatible
with C-3 and C-4 electronic fuel management systems.
Performer Buick V6 (non-EGR) l ................... #5486

Carburetor Recommendations: Edelbrock Thunder Series AVS

or Performer Series carb, 500 cfm (see pages 13-15).
Installation Notes: Recommended intake gasket: Fel-Pro #1200. Manifold
height: A-4.67", B-5.45", (1.30" taller than stock); Carb pad height: 5.06" (see
pages 81-82). Port exit dimensions: .80" x 1.85". Use 1981 Buick Regal water neck.
Camshaft Recommendations: Performer Plus #5487. See pages 121-122 for specifications.

NITROUS

WATER PUMPS

PERFORMER BUICK V6 (IDLE-5500 RPM)

ACCESSORIES

Torker AMC #2930

Performer Buick V6 #5486

PERFORMER ROVER (IDLE-5500 RPM)

FUEL PUMPS
SPORTSWEAR
INDEX

BUICK/ROVER 215 V8

Designed for Rover 3500cc V8's (1968 & later) and 1961-63 Buick and Oldsmobile aluminum 215 V8's.
Manifold not equipped with EGR. Will not work with OEM carburetors (except Carter AVS).
Performer Rover (non-EGR) l ....................................................................................................................#2198
Performer Rover Polished (non-EGR) l..................................................................................................#21981

Performer Buick/Rover #2198

31

Carburetor Recommendations: Edelbrock Thunder Series AVS or Performer Series carb, 500 cfm (see pages 13-15).
Installation Notes: Recommended intake gasket: Fel-Pro #MS96002. Manifold height: A-5.00", B-5.92" (measured
to engine block); Carb pad height: 5.46" (see pages 81-82). Port exit dimensions: .88" x 1.54". Throttle Bracket #8031
or #8036 will fit and accept GM style throttle, kickdown and cruise control cables.

WWW.EDELBROCK.COM

CARBURETORS

BUICK/CADILLAC AND S/B CHEVY MANIFOLDS

PERFORMER BUICK 455 (IDLE-5500 RPM)

Designed for street 400-430-455 c.i.d. Buick V8's. Manifold not equipped with EGR.
Will fit cold air induction hoods. Will not fit Buick 350.
Performer Buick 455 (non-EGR) l ............................................................................................................#2146
Carburetor Recommendations: OEM 4-bbl. Edelbrock Thunder Series AVS or Performer Series carb, 650-800 cfm (see pages 13-15).
Installation Notes: Recommended intake gaskets: for 1967-71, Fel-Pro #MS96005; 1972-76, Fel-Pro #MS96014.
#2146 accepts divorced choke-type Quadrajet only. Manifold height: A-3.80", B-4.75"; Carb pad height: 4.27"
(see pages 81-82). Port exit dimensions: 1.14" x 2.26".
Performer Buick 455 #2146

BUICK B-4B (IDLE-5500 RPM)

Buick B-4B #2515

CADILLAC 472-500 V8

PERFORMER CADILLAC (IDLE-5500 RPM)

CHEVROLET 2.8L V6

PERFORMER 2V 60 V6 (IDLE-5500 RPM)

EMISSIONS GUIDE

PLEASE REFER TO PAGE 212 FOR MORE INFORMATION REGARDING THE EMISSIONS GUIDE.

32

INDEX

l 50-STATE LEGAL l RACING ONLY l PRE-POLLUTION CONTROLLED VEHICLES l STOCK REPLACEMENT l ENGINE SWAP

SPORTSWEAR

Performer 4V 60 V6 #3785/#3789

Carburetor Recommendations: Holley #0-8007 (390 cfm). Installation Notes: Manifold height: A-4.90", B-5.95" ; Carb pad
height: 5.42" (see pages 81-82). Port exit dimensions: 1.00" x 1.28"/1.00" x 1.71". Recommended intake gasket: Fel-Pro
#1270 or #MS91022. Linkage and bracketry come with top. With 4-bbl. carb #0-8007 and auto trans, a GM transmission
cable #25515598 is required.
Camshaft Recommendations: Performer Plus #3790. See pages 121-122 for specifications.

FUEL PUMPS

Designed for 1982-85 2.8L 60 V6 Chevy longitudinal-mount engines used in light duty pick-ups and cars.
Design features one manifold base and two interchangeable tops. The Performer 4V 60 V6 #3789 accepts
std. flange 4-bbl. carbs. Edelbrock chrome valve covers #4488 are available for this engine, see page 187.
Performer 4V 60 V6 Base ...........................................................................................................................#3785
Performer 4V 60 V6 Top (non-EGR) l .....................................................................................................#3789
Top Gasket (included with top) ...................................................................................................................#6942

NITROUS

PERFORMER 4V 60 V6 (IDLE-6000 RPM)

ACCESSORIES

Performer 2V 60 V6 EGR #3785/#3787

Carburetor Recommendations: OEM 2-bbl.

Installation Notes: Recommended intake gasket: Fel-Pro #MS91022. Manifold height: A-4.37", B-5.45"; Carb pad height: 4.91"
(see pages 81-82). Port exit dimensions: 1.00" x 1.28"/1.00" x 1.71". Linkage and bracketry come with top. Note: When used on
Jeep Cherokee, additional hood shimming is required for clearance. Hood shims available from Jeep dealers (part #J0680435).
Camshaft Recommendations: Performer Plus #3790. See pages 121-122 for specifications.

WATER PUMPS

Designed for 1982-85 2.8L 60 V6 Chevy longitudinal-mount engines. Features base and interchangeable tops.
#3787 accepts stock 2-bbl. carb. Edelbrock Signature Series chrome valve covers #4488 are available for this
engine, see page 187.
Performer 2V 60 V6 Base l ......................................................................................................................#3785
Performer 2V 60 V6 Top (EGR) l .............................................................................................................#3787
Top Gasket (included with top) ...................................................................................................................#6941

CRATE ENGINES

Performer Cadillac #2115

EFI

Carburetor Recommendations: OEM 4-bbl. Edelbrock Thunder Series AVS or Performer Series carb, 750-800 cfm (see pages 13-15).
Installation Notes: When using Quadrajet, #2115 accepts divorced or electric choke only. Recommended intake gasket: Fel-Pro
#MS96028. Manifold height: A-4.88", B-5.81"; Carb pad height: 5.34" (see pages 81-82). Port exit dimensions: 1.25" x 2.00".

SUPERCHARGERS

This Performer is designed for 1968-76 Cadillac 472 and 500 cubic-inch engines. For either square or
spread-bore carbs, #2115 is the first intake designed specifically for high-performance Cadillacs using
standard heads. Like all Edelbrock Performers, this manifold increases torque and horsepower from idle
to 5500 rpm. The broad power band is ideal for high-performance street and engine swap applications.
Specs on this non-EGR manifold include a carb pad height thats 3" taller than stock. Dropped divider
wall evens air/fuel ratio throughout the rpm range. Stock air conditioning compressor will not fit.
Performer Cadillac (non-EGR) l ...............................................................................................................#2115

POWER PACKAGES KITS

Carburetor Recommendations: OEM 4-bbl. Edelbrock Thunder Series AVS or Performer Series carb, 650-800 cfm
(see pages 13-15). Installation Notes: Recommended intake gaskets: for 1967-76, Edelbrock #7246 or Fel-Pro #MS96005;
1972-76, Fel-Pro #MS96014. Manifold height: A-3.80", B-4.75"; Carb pad height: 4.27" (see pages 81-82).
Port exit dimensions: 1.14" x 2.26".

CAMSHAFT & VALVETRAIN

Back by popular demand, #2515 is a resurrection of the popular B-4B manifold made in the late 1960s
for street 400-430-455 c.i.d. Buick V8's. The only change to the original design is the addition of our proven
Performer-style carb pad that accepts either square-bore or spread-bore carbs, making this manifold
an excellent choice for both restoration and performance-minded Buick fans.
Buick B-4B (non-EGR) l .............................................................................................................................#2515

MANIFOLDS GASKETS CYLINDER HEADS

BUICK 400-455 V8

CARBURETORS
CYLINDER HEADS GASKETS MANIFOLDS

MANIFOLDS

CHEVROLET 90 V6

PERFORMER 4.3L T.B.I. V6 (IDLE-5500 RPM)

Designed for street 1987-94 Chevrolet 4.3L V6 with factory Throttle Body Injection. The Performer 4.3L
intake manifold provides outstanding throttle response and torque increases from idle to 5500 rpm.
Accepts all factory accessories/hardware. Throttle body unit remains in stock location. Not for 1994
and later engines equipped with flash memory computer. Flash memory ECM is located underhood.
Performer 4.3L T.B.I. V6 (EGR) l ...............................................................................................................#3713

CAMSHAFT & VALVETRAIN

Performer 4.3L #3713

Injector Recommendations: Use stock Throttle Body Injection unit. Installation Notes: Recommended intake gasket:
GM #10163423. Manifold height: A-3.93", B-5.15"; Carb pad height: 4.54" (see pages 81-82). Port exit dimensions:
1.10" x 1.92". Camshaft Recommendations: Performer Plus #3714. See pages 121-122 for specifications.

PERFORMER 90 V6 (IDLE-5500 RPM)

Designed for street and marine 1985-95 200-229-262 c.i.d. (3.8 and 4.3L) Chevy V6s. Dual bolt pattern water
neck fits both automotive and marine applications. Produced 18 more horsepower than an older manifold
design on 4.3L marine engine. Will not accept stock automotive carbs or 262 T.B.I. unit.
Performer 90 V6 (non-EGR) l ...................................................................................................................#2111

KITS POWER PACKAGES

Carburetor Recommendations: Edelbrock Thunder Series AVS or Performer Series carb, 500 cfm (see pages 13-15).
Installation Notes: Recommended intake gasket: Edelbrock #7209 or Fel-Pro #1202. Manifold height: A-3.50", B-4.18";
Carb pad height: 3.84" (see pages 81-82). Port exit dimensions: 1.15" x 1.87".
Performer 90 V6 #2111

PERFORMER VORTEC V6 (IDLE-5500 RPM)

EFI

SUPERCHARGERS

Based on the powerful Edelbrock #2111, this dual-plane intake is designed for the engine swap market
utilizing 1985 and later Chevy 200-229-262 c.i.d. (3.8L and 4.3L) V6 engines with Vortec heads.
With this manifold, rodders can take advantage of the higher flow available with the Vortec head design.
Performer Vortec V6 #2114 has provisions for external water bypass and may be used on either Vortec
blocks or 1995 and earlier blocks. Designed for use with Edelbrock Thunder Series AVS or Performer
Series 500 cfm carbs, it accepts late model water neck, alternator, HEI and air conditioning.
Performer Vortec V6 (non-EGR) l.............................................................................................................#2114

CRATE ENGINES

Performer Vortec V6 #2114

Carburetor Recommendations: Edelbrock Thunder Series AVS or Performer Series carb, 500 cfm (see pages 13-15)
Installation Notes: Recommended intake gasket: GM 89017866. Manifold height: A-3.50", B-4.18"; Carb pad height: 3.84"
(see pages 81-82). Port exit dimensions: port exit is 2.05" tall with slanted side walls.
Camshaft Recommendations: Performer Plus #2112. See pages 121-122 for specifications.

WATER PUMPS

CHEVROLET 262-400 SMALL-BLOCK V8

PERFORMER EPS (IDLE-5500 RPM)

FUEL PUMPS

NITROUS

ACCESSORIES

Performer EPS
#2703 with Oil Fill Tube

SPORTSWEAR
INDEX

S/B CHEVY

Manifold #2701 is approved for

IMCA sanctioned racing events,
see rulebook for details

33

Designed for 1986 and earlier 262-400 cubic-inch Chevys, the Performer EPS dual-plane manifold
is optimized to deliver superior performance with Edelbrock square-bore Performer Series or
Thunder Series AVS carburetors. This small-block Chevy manifold has a runner design thats tuned
for peak torque at 3500 rpm on a 350-inch engine and its ideal for power from off-idle to 5500 rpm.
Dyno tests showed gains of 5 hp and 9 ft-lbs. of torque over the Edelbrock Performer manifold #2101
on a 350 Chevy. From 3000 to 4500 rpm, the increases averaged 5+ ft-lbs. of torque for more performance
where you need it most. Performer EPS manifold #2703 combines a modern runner design with a front
mounted oil fill tube for those who want the vintage look of our Classic valve covers with no breathers.
#2703 has the same performance features as the Performer EPS #2701. Includes Oil Fill Tube (not installed)
and matching push-in breather cap. The Oil Fill Tube and Breather are also available separately as #4803.
Match with a dependable Edelbrock square-bore carburetor for maximum performance gains.
Will not fit under stock Corvette hood. Available with satin, polished, black powder coated or EnduraShine
finish, see page 29.
Satin Polished Black EnduraShine
Performer EPS (non-EGR) lll ......................................................... #2701..... #27011..... #27013........#27014
Performer EPS with Oil Fill Tube Included (non-EGR) lll....... #2703..... ...N/A ....... #27033........#27034
Carburetor Recommendations: Edelbrock Thunder Series AVS or Performer Series carb, 500-650 cfm (see pages 13-15)
Installation Notes: Recommended intake gasket: Edelbrock #7201. Manifold ht: A-3.74", B-4.80"; Carb pad height: 4.27"
(see pages 81-82). Port exit dimensions: 1.15" x 1.87". Camshaft Recommendations: #2102, #2103, #2208, #2209.
See pages 121-123 for specifications.

WWW.EDELBROCK.COM

CARBURETORS

S/B CHEVY MANIFOLDS

Performer EPS Vortec #2716

Now available for small-block Chevys with Vortec or Edelbrock E-Tec cylinder heads, the Performer EPS
dual-plane manifold is optimized to deliver superior performance with Edelbrock square-bore Performer
Series or Thunder Series AVS carburetors. The runner design is tuned for peak torque around 3500 rpm
on a 350-inch engine and its ideal for power from off-idle to 5500 rpm. Dyno tests showed gains averaging
5+ ft-lbs. of torque from 3000 to 4500 rpm for more performance where you need it most. Match with
a dependable Edelbrock square-bore carburetor for maximum performance gains. Will not fit under stock
Corvette hood. Available with satin, polished, black powder coated or EnduraShine finish, see page 29.
Satin Polished Black EnduraShine
Performer EPS Vortec (non-EGR) l .................................................... #2716..... #27161..... #27163........#27164

PERFORMER - 86 & EARLIER (IDLE-5500 RPM)

Carburetor Recommendations: OEM 4-bbl., use choke rod #9171, bracket #8031 or #8036 for 1972-78 Edelbrock Thunder Series
AVS or Performer Series carb, 500-650 cfm (see pages 13-15), use bracket #8031 or #8036 for 1972-78.
Installation Notes: Use adapter #8035 for clamp-on EGR valve. With carb #1400 & #3701, EGR spacer #1476 is required. #1476 is
required with #3701 on centerbolt heads with 1986 & earlier bolt pattern. Choke plate #8901 included Recommended intake gasket:
Edelbrock #7201. Manifold height: A-3.50", B-4.60"; Carb pad height: 4.05" (see pages 81-82). Port exit dimensions: 1.14" x 1.88".
Camshaft Recommendations: #2102, #2103, #2208, #2209. See pages 121-123 for specifications.

34

INDEX

PLEASE REFER TO PAGE 212 FOR MORE INFORMATION REGARDING THE EMISSIONS GUIDE.

SPORTSWEAR

l 50-STATE LEGAL l RACING ONLY l PRE-POLLUTION CONTROLLED VEHICLES l STOCK REPLACEMENT l ENGINE SWAP

FUEL PUMPS

EMISSIONS GUIDE

NITROUS

Performer #2104

Carburetor Recommendations: #2104: OEM 4-bbl. (pre-1981 only), use choke rod #9171, bracket #8031 or #8036 for 1972-78
Edelbrock Thunder Series AVS or Performer Series carb, 500-650 cfm (see pages 13-15), use bracket #8031 or #8036 for 1972-78.
#3706: OEM 4-bbl. Edelbrock Performer Series #1400, 600 cfm (see pages 13-15), use bracket #8031 or #8036 for 1972-78.
Installation Notes: Use adapter #8035 for clamp-on EGR valve. With carb #1400 & #3706, EGR spacer #1476 is required.
Choke plate #8901 included with #2104. #3706 has no provision for exhaust heated chokes. Recommended intake gasket:
GM #10159409. Manifold height: A-3.50", B-4.60"; Carb pad height: 4.05" (see pages 81-82). Port exit dimensions: 1.14" x 1.88".
Camshaft Recommendations: #2102, #2103, #2208, #2209. See pages 121-123 for specifications.

ACCESSORIES

Performer Vortec #2116

Designed for street 262-400 c.i.d. Chevy V8's that have heads with canted center bolt holes.
Both accept late-model water neck, air-conditioning, alternator, H.E.I. and have rear water crossovers.
#2104 accepts exhaust-heated chokes. For 1987-95 stock aluminum heads use #2101. Will not fit
Chevrolet Bowtie or LT1 heads.
Satin
Polished
Black
Performer (non-EGR) l.........................................................................#2104 ................#21041 ..................#21043
Performer (EGR) l .................................................................................#3706 ...................N/A .......................N/A

WATER PUMPS

PERFORMER - FOR 1987-95 CAST IRON

CYLINDER HEADS (IDLE-5500 RPM)

CRATE ENGINES

Performer #3701 with EGR

Carburetor Recommendations: OEM 4-bbl. (pre-1981, electric choke only) - Use our #8032 throttle bracket.
Edelbrock Thunder Series AVS or Performer Series carb, 500-650 cfm (see pages 13-15), use bracket #8032 for 1972-78
Installation Notes: Recommended intake gasket: Edelbrock #7235. Manifold height: A-3.87", B-5.28"; Carb pad height: 4.57"
(see pages 81-82). Port exit is 2.05" tall with slanted side walls. Stock brackets will require modification to fit the upright
manifold bolt holes. Camshaft Recommendations: #2102, #2103, #2208, #2209. See pages 121-123 for specifications.

EFI

Performer #2101

Based on the popular and powerful Edelbrock #2101, this dual-plane intake is designed for the street
rod, industrial and engine swap market utilizing 262-400 c.i.d. Chevy V8's with 1996 and later Vortec (L31)
cast iron or the Edelbrock E-Tec aluminum heads. Manifold has provisions for external water bypass and
may be used on either Vortec blocks or 1995 and earlier blocks. No provision for exhaust heated chokes.
Accepts both square-bore and spread-bore carbs and late model water neck, alternator, HEI and air
conditioning brackets. Will not fit under stock Corvette hood. For high performance engines operating
from 1500-6500 rpm, see the Performer RPM Vortec manifold on the next page. Available with satin, black
powder coated or EnduraShine finish, see page 29.
Satin
Black
EnduraShine
Performer Vortec (non-EGR) l ...........................................................#2116 ................#21163 ..................#21164

SUPERCHARGERS

PERFORMER VORTEC (IDLE-5500 RPM)

POWER PACKAGES KITS

Manifold #2716 is approved for

IMCA sanctioned racing events.
see rule book for details

Designed for street 1955-86 small-block Chevys. Performers accept late-model choke, water neck,
air-conditioning, alternator and H.E.I. Has provisions to add oil fill tube. Not for 1987 and later cast iron
or Chevy Bowtie heads. Will fit 1987 and later stock aluminum heads.
Satin
Polished
Performer (non-EGR) lll .........................................................................................#2101 ...................#21011
Performer (EGR) lll .................................................................................................#3701 ......................N/A

CAMSHAFT & VALVETRAIN

Carburetor Recommendations: Edelbrock Thunder Series AVS or Performer Series carb, 500-650 cfm (see pages 13-15)
Installation Notes: Recommended intake gasket: Edelbrock #7235. Manifold ht: A-3.96", B-5.08"; Carb pad height: 4.52"
(see pages 81-82). Port exit is 2.05" tall with slanted side walls. Camshaft Recommendations: #2102, #2103, #2208, #2209.
See pages 121-123 for specifications.

MANIFOLDS GASKETS CYLINDER HEADS

PERFORMER EPS VORTEC (IDLE-5500 RPM)

CARBURETORS

Performer Air-Gap #26014 with EnduraShine Finish

PERFORMER RPM (1500-6500 RPM)

Carburetor Recommendations: Edelbrock Thunder Series AVS or Performer Series carb, 650-800 cfm (see pages 13-15), use
bracket #8031 or #8036 for 1972-78. Installation Notes: Use #8504 Edelbrock bolt kit. Recommended intake gasket:
Edelbrock #7201. Manifold height: A-4.20", B-5.25" (.70" taller than #2101); Carb pad height: 4.72" (see pages 81-82).
Port exit dimensions: 1.16" x 1.92". Camshaft Recommendations: Performer RPM #7102, #2201 and #2204.
See pages 122-123 for specifications.
Performer RPM #71014 with EnduraShine Finish

WATER PUMPS

CRATE ENGINES

EFI

SUPERCHARGERS

KITS POWER PACKAGES

Designed for 1955-86 262-400 c.i.d. Chevy V8's for maximum power and a broad torque curve for
high-performance street/marine engines. Provides power like a single-plane and throttle response
like a dual-plane. Has provisions to machine for an oil fill tube. No provisions for exhaust heated or
stock-style choke. Accepts late-model water neck, air-conditioning, alternator and H.E.I. Will fit cast
iron Chevrolet Bowtie heads, but will not fit 1987 and later cast iron heads. Will not fit under stock
Corvette hood. Available with satin, polished, black powder coated or EnduraShine finish, see page 29.
Satin Polished Black EnduraShine
Performer RPM (non-EGR) ll............................................................ #7101..... #71011..... #71013........#71014

Performer RPM Q-Jet #7104

PERFORMER RPM Q-JET (1500-6500 RPM)

Designed for 1955-86 262-400 c.i.d. Chevy V8's for spread-bore (Q-Jet) or square-bore carbs.
Delivers maximum power and a broad torque curve for high-performance street. Carb pad will accept
square-bore carbs without adapters. #2504 Marine features brass lined front water crossover and brass
flange inserts to cover the rear water openings. #2506 Marine intake fits 1987-95 262-400 c.i.d. Chevy.
Performer RPM Q-Jet has same provisions as #7101. Will not fit under stock Corvette hood.
Performer RPM Q-Jet (non-EGR) ll ......................................................................................................#7104
Performer RPM Q-Jet Marine Application (non-EGR) ll .....................................................................#2504
Performer RPM Q-Jet Marine Application 1987-95 (non-EGR) ll .....................................................#2506
Carburetor Recommendations: Edelbrock Thunder Series AVS or Performer Series carb, 650-800 cfm (see pages 13-15),
use bracket #8031 or #8036 for 1972-78. #2504 and #2506 use #1409/#1410 Edelbrock carburetor.
Installation Notes: Recommended intake gasket: Edelbrock #7201. Manifold height: A-4.20", B-5.25"; Carb pad height:
4.72" (see pages 81-82). Port exit dimensions: 1.16" x 1.92". Use rod #9172 for divorced choke with Q-Jet.
Camshaft Recommendations: Performer RPM #7102, #2201 and #2204. See pages 122-123 for specifications.

PERFORMER RPM VORTEC (1500-6500 RPM)

ACCESSORIES
NITROUS

Designed for 1955-86 262-400 c.i.d. small-block Chevys, the Performer Air-Gap features the air-gap design for the
ultimate street performance in the idle to 5500 rpm range. This design features an open air space that separates
the runners from the hot engine oil resulting in a cooler, denser charge for more power. High-velocity runners
deliver excellent throttle response throughout the power band. The great looks of the Performer Air-Gap along
with the solid idle to 5500 rpm performance makes this an ideal choice for street rods and street machines.
Performer Air-Gap #2604 is for 1987-95 cast iron heads with canted center bolt holes. No provision for exhaust
heated chokes or exhaust crossover. Fits spread-bore or square-bore carburetors. Will not fit under stock
Corvette hood. Available with satin, polished, Black or EnduraShine finish, see page 29.
Satin Polished Black EnduraShine
Performer Air-Gap (non-EGR) ll ...................................................... #2601.......#26011 ......#26013 ..... #26014
Performer Air-Gap for 1987-95 Cast Iron Heads (non-EGR) ll... #2604..........N/A ...........N/A ..........N/A
Carburetor Recommendations: Edelbrock Thunder Series AVS or Performer Series carb, 500-650 cfm (see pages 13-15),
use bracket #8031 or #8036 for 1972-78. Installation Notes: Recommended intake gasket: Edelbrock #7201 (#2601); GM
#10159409 (#2604). Manifold height: A-3.72", B-4.92" (.27" taller than #2101); Carb pad height: 4.32" (see pages 81-82). Port exit
dimensions: 1.14" x 1.88". Camshaft Recommendations: Performer Plus #2102 and #2103. See page 121 for specifications.

Performer RPM Vortec #71164 with EnduraShine Finish

FUEL PUMPS
SPORTSWEAR
INDEX

S/B CHEVY

PERFORMER AIR-GAP (IDLE-5500 RPM)

CAMSHAFT & VALVETRAIN

CYLINDER HEADS GASKETS MANIFOLDS

MANIFOLDS

Performer RPM Marine Vortec #2516

35

Based on the powerful Edelbrock #7101, this single four-barrel intake is designed for the street rod,
marine and engine swap market utilizing 262-400 c.i.d. Chevy V8's with 1996 and later Vortec (L31) cast iron
or Edelbrock E-Tec aluminum heads. #2516 Marine intake features brass lined front water crossover and
brass flange inserts to cover the rear water openings. An external water bypass boss is machined into the
front of the water crossover for use on 1996 and later Vortec production engines. Manifold #7116 accepts
square-bore carbs only. For street and marine engines operating from idle-5500 rpm, see the Performer
Vortec manifold on page 34 or Performer Vortec EPS on page 34. Will not fit under stock Corvette hood.
Available with satin, black powder coated or EnduraShine finish, see page 29.
Satin
Black
EnduraShine
Performer RPM Vortec (non-EGR) l .................................................#7116 ................#71163 ..................#71164
Performer RPM Vortec Marine Application (non-EGR) l........... #2516 ...................N/A .......................N/A
Carburetor Recommendations: Edelbrock Thunder Series AVS or Performer Series carb, 650-800 cfm (see pages 13-15),
use bracket #8032 for 1972-78. #2516 use #1409/#1410 Edelbrock carburetor. Installation Notes: Recommended intake
gasket: Edelbrock #7235 or GM #89017465. Manifold height: A-4.20", B-5.25"; Carb pad height: 4.72" (see pages 81-82).
Port exit is 2.05" tall with slanted side walls. Stock brackets will require modification to fit the upright manifold bolt
holes. Use Edelbrock Vortec throttle bracket #8032, see page 27. Camshaft Recommendations: Performer RPM #7102,
#2201 and #2204. See page 123 for specifications.

WWW.EDELBROCK.COM

CARBURETORS

S/B CHEVY MANIFOLDS

THE ORIGINAL OUR PROVEN, RACE-WINNING DESIGN IN A DUAL-PLANE MANIFOLD

Designed for 1955-86 262-400 c.i.d. Chevrolet V8's, the award-winning RPM Air-Gap incorporates the same
race-winning technology thats used on our Victor Series competition intakes. The air-gap design features an
open air space that separates the runners from the hot engine oil resulting in a cooler, denser charge for more
power. Includes rear water outlets, two distributor clamp locations and nitrous bosses. The heater outlet boss
is angled for proper fit over the valve cover. The temp sensor boss clears all waternecks. Available with satin,
polished, black powder coated or EnduraShine finish, see page 29.
RPM Air-Gap #75013

NOTE: For square-bore carburetors only. No provision for exhaust-heated chokes and no exhaust crossover.
Not for 1987 and later cast iron heads and will not fit under stock Corvette hood. Will not fit L98 cylinder heads.

Satin Polished Black EnduraShine

RPM Air-Gap (non-EGR) ll................................................................ #7501..... #75011..... #75013........#75014

RPM Air-Gap #75014 with EnduraShine Finish

Torker II #5001

Carburetor Recommendations: Edelbrock Thunder Series AVS or Performer Series carb, 600-800 cfm (see pages 13-15), use
bracket #8031 or #8036 for 1972-78. Installation Notes: Recommended intake gasket: Edelbrock #7201. Manifold height: A-3.53",
B-4.63"; Carb pad height: 4.08" (see pages 81-82). Port exit dimensions: 1.09" x 1.73". Camshaft Recommendations: Torker Plus
#5002. See page 122 for specifications.

C-26 #54254 with EnduraShine Finish

PLEASE REFER TO PAGE 212 FOR MORE INFORMATION REGARDING THE EMISSIONS GUIDE.

36

INDEX

l 50-STATE LEGAL l RACING ONLY l PRE-POLLUTION CONTROLLED VEHICLES l STOCK REPLACEMENT l ENGINE SWAP

SPORTSWEAR

EMISSIONS GUIDE

FUEL PUMPS

Carburetor Recommendations: Edelbrock Thunder Series AVS #1803 and #1804, 500 cfm (see pages 13-15).
Installation Notes: #5425: Recommended intake gasket: Edelbrock #7201. Manifold height: A-2.95", B-3.55"; Carb pad height: 3.25"
(see pages 81-82). Port exit dimensions: 1.18" x 1.90". H.E.I. will fit. #5426: Recommended intake gasket: Edelbrock #7235.
Manifold height: A-3.15", B-3.75"; Carb pad height: 3.45" (see pages 81-82). Port exit 2.05" tall with slanted side walls. H.E.I. will fit.

NITROUS

C-26 Vortec #5426

FOR STANDARD AND VORTEC HEADS

For 1955-86 262-400 c.i.d. S/B Chevys, this dual-quad has a low profile for hood clearance on most vehicles.
Air-conditioning bosses and front oil filler tube boss included. An external water bypass boss is machined into
the front of the water crossover for use on 1996 and later Vortec production engines. Stock alternator brackets
do not fit. C-26 Dual-Quad manifold #5426 is designed for Chevy V8's with 1996 and later Vortec (L31) cast iron
or Edelbrock E-Tec aluminum heads. Carb center to carb center: 6-7/16". Accepts oil fill tube and breather
#4803. Use with Performer-Plus cam #2103 for low-end torque or Torker-Plus cam/kit #5002 for top-end power.
Available with satin, polished or EnduraShine finish, see page 29.
Satin
Polished
EnduraShine
C-26 (non-EGR) ll ...............................................................................#5425 ................#54251 ..................#54254
C-26 Vortec (non-EGR) l ......................................................................#5426 ...................N/A .......................N/A

ACCESSORIES

C-26 DUAL-QUAD (1500-5500 RPM)

WATER PUMPS

Designed for 1955-86 high-performance street 262-400 c.i.d. small-block Chevys. Will fit Corvette and 87 and
later stock heads. Accepts late-model water neck, air-conditioning, alternator and H.E.I. Will not fit 87 and
later cast iron heads and will not cover port openings of Chevrolet Bowtie or LT1 heads. Not for heavy vehicles
(trucks, vans etc.); use Performer EPS #2701.
Satin
Polished
Torker II (non-EGR) ll ................................................................................................#5001 ...................#50011

CRATE ENGINES

TORKER II (2500-6500 RPM)

EFI

Carburetor Recommendations: Edelbrock Thunder Series AVS or Performer Series carb, 650-800 cfm (see pages 13-15),
use bracket #8032 for 1972-78. Installation Notes: Recommended intake gasket: Edelbrock #7235 or GM #89017465.
Manifold height: A-4.20", B-5.25"; Carb pad height: 4.72" (see pages 81-82). Stock brackets will require modification to fit
the upright manifold bolt holes. Use Edelbrock Vortec throttle bracket #8032, see page 27. Port exit is 2.05" tall with
slanted side walls. Camshaft Recommendations: Performer RPM #7102, #2201 and #2204.
See pages 122-123 for specifications.

SUPERCHARGERS

Based on the powerful Performer RPM Vortec #7116, this single four-barrel intake is designed for 262-400 c.i.d.
Chevy V8's with 1996 and later Vortec (L31) cast iron or Edelbrock E-Tec aluminum heads. The air-gap design
features an open air space that separates the runners from the hot engine oil resulting in a cooler, denser
charge for more power. An external water bypass boss is machined into the front of the water crossover for
use on 1996 and later Vortec production engines. Includes rear water outlets, nitrous bosses, a temp sensor
boss that clears all waternecks, two distributor clamp locations and a heater outlet boss thats angled for proper
fit over the valve cover. Accepts 1976 and later alternator and air-conditioning brackets for street installations.
For square-bore carbs. No provision for exhaust-heated chokes and no exhaust crossover. Will not fit under
stock Corvette hood. Available with satin, black powder coated or EnduraShine finish, see page 29.
Satin
Black
EnduraShine
RPM Air-Gap Vortec (non-EGR) l ..................................................... #7516 ................ #75163 ..................#75164

POWER PACKAGES KITS

RPM Air-Gap Vortec #7516

RPM AIR-GAP VORTEC (1500-6500 RPM)

CAMSHAFT & VALVETRAIN

Carburetor Recommendations: Edelbrock Thunder Series AVS or Performer Series carb, 650-800 cfm (see pages 13-15),
use bracket #8031 or #8036 for 1972-78. Installation Notes: Accepts all 1976 and later alternator and A/C brackets for
the street. Use #8504 Edelbrock bolt kit. Recommended intake gasket: Edelbrock #7201. Manifold height: A-4.20", B-5.25"
(same as #7101); Carb pad height: 4.72" (see pages 81-82). Port exit dimensions: 1.14" x 1.95".
Camshaft Recommendations: Performer RPM #7102, #2201 and #2204. See pages 122-123 for specifications.

MANIFOLDS GASKETS CYLINDER HEADS

RPM AIR-GAP (1500-6500 RPM)

CARBURETORS

S/B CHEVY

RPM AIR-GAP DUAL-QUAD (1500-6500 RPM)

RPM Air-Gap Dual-Quad #7525

Designed for 1955-86 S/B Chevys, this intake stands 1-5/8" taller than the low-profile C-26 intake and
offers performance improvements in the 1500-6500 rpm range. The large runners feature our unique
Air-Gap design that separates the runners from the hot engine valley for a cooler, denser charge.
Also available as a complete carb and manifold kit, see page 135. Will not fit under stock Corvette hood.
Available with satin or EnduraShine finish, see page 29.
Satin
EnduraShine
RPM Air-Gap Dual-Quad (non-EGR) ll .....................................................................#7525 ....................#75254
Carburetor Recommendations: Edelbrock Thunder Series AVS #1803 and #1804, 500 cfm (see pages 13-15).
Installation Notes: H.E.I. will not fit. Recommended intake gasket: Edelbrock #7201. Manifold height: A-4.57", B-5.20";
Carb pad height: 4.89" (see pages 81-82). Port exit dimensions: 1.16" x 1.92". Carb center-to-center distance: 6-7/16".
Camshaft Recommendations: Performer RPM #7102, #2201 and #2204. See pages 122-123 for specifications.

RPM AIR-GAP DUAL-QUAD VORTEC (1500-6500 RPM)

CAMSHAFT & VALVETRAIN

CYLINDER HEADS GASKETS MANIFOLDS

MANIFOLDS

KITS POWER PACKAGES

Designed for 262-400 c.i.d S/B Chevys with 1996 and later Vortec cast iron or Edelbrock E-Tec heads,
this intake stands 1-5/8" taller than the low-profile C-26 dual-quad intake and offers performance
improvements in the 1500-6500 rpm range. The larger runners feature our unique Air-Gap design that
separates the runners from the hot engine valley for a cooler, denser charge. Also available as a complete
carb and manifold kit, see page 135. Available with satin or EnduraShine finish, see page 29.
Satin
EnduraShine
RPM Air-Gap Dual-Quad Vortec (non-EGR) l ..........................................................#7526 ...................#75264
RPM Air-Gap
Dual-Quad Vortec
Manifold Kit #20264

Carburetor Recommendations: Edelbrock Thunder Series AVS or Performer Series carb, 500 cfm (see pages 13-15).
Installation Notes: H.E.I. will not fit. Recommended intake gasket: Edelbrock #7235. Manifold height: A-4.74", B-5.46";
Carb pad height: 5.10" (see pages 81-82). Port exit 2.05" tall with slanted side walls. Carb center-to-center distance:
6-7/16". Camshaft Recommendations: Performer RPM #7102, #2201 and #2204. See pages 122-123 for specifications.

EFI

SUPERCHARGERS

MATCHING EDELBROCK PARTS FOR S/B CHEVY

CRATE ENGINES

RPM Air-Gap Dual-Quad Vortec #75264 with EnduraShine

Description
Page No.
Performer Cylinder Heads .................................................................................................................................... 91
Roller Timing Set................................................................................................................................................... 127
Cam Gear Drive ..................................................................................................................................................... 126
Valve Springs..................................................................................................................................................117-118
Retainers .........................................................................................................................................................117-118
Fuel Pump........................................................................................................................................................202-205
Accessories ....................................................................................................................................................186-193
Water Pumps ......................................................................................................................................................... 182

WATER PUMPS

C-357-B TRIPLE-DEUCE (IDLE-5500 RPM)

ACCESSORIES

Designed for 262-400 c.i.d. small-block Chevys with 1996 and later Vortec (L31) cast iron heads or
Edelbrock E-Tec aluminum heads. This manifold has a balanced 180 firing order port runner arrangement.
It is machined for 3-bolt or 4-bolt carburetors. Carb center-to-center of 5-1/2". Use with Performer-Plus
camshaft and lifter kit #2103 for low-end torque or upgrade to a Rollin Thunder cam and lifter kit #22085
for improved torque, increased top-end horsepower and reduced friction for increased economy.
C-357-B Vortec for Edelbrock 94 3-Bolt Carbs (non-EGR) l................................................................#5414
C-357-B Vortec for 4-Bolt Carbs (non-EGR) l ........................................................................................#5417

INDEX

SPORTSWEAR

FUEL PUMPS

Carburetor Recommendations: Rochester 2GC (small 1-7/16" bore) for #5419 (contact www.HotRodCarbs.com),
Edelbrock 94 #1151 3-bolt (with 1-1/4" bore) for #5418.(1) Edelbrock 94 #1151 and (2) Edelbrock 94 #1152. (see pages 16).
Installation Notes: H.E.I. will not fit. Recommended intake gasket: Edelbrock #7201. Manifold height: A-3.9", B-4.6" for #5419;
A-3.77", B-4.88" for #5418. Carb pad height: 4.25" (for #5419), 4.325" for #5418. (see pages 81-82). Port exit dimensions: 1.12" x 1.87".

NITROUS

Chevrolet C-357-B #5418

Designed for 1955-86 262-400 c.i.d. small-block Chevys, this manifold has a balanced 180 firing order port
runner arrangement. It contains an exhaust gas heat crossover and offers excellent performance potential.
#5418/#5419 has machined front oil filler tube pad with boss. #5418 is machined for 3-bolt carburetors.
Carb center-to-center: 5-1/2". Use with Performer-Plus camshaft and lifter kit #2103 for low-end torque
or Torker-Plus cam/kit #5002 for top-end power. #5418 & #5419 accept Oil Fill Tube and Breather #4803.
C-357-B for Edelbrock 94 3-Bolt Carbs (non-EGR) ll .........................................................................#5418
C-357-B for 4-Bolt Carbs (non-EGR) ll..................................................................................................#5419
Progressive Linkage Kit (for Edelbrock 94 carbs only) ll..................................................................#1033

C-357-B TRIPLE-DEUCE VORTEC (1500-6500 RPM)

C-357-B Vortec Intake Manifold #5417

Edelbrock manifolds
are manufactured
in the USA for
unsurpassed quality.

37

Carburetor Recommendations: Edelbrock 94 #1151 primary, #1152 secondary 3-bolt. Rochester 2GC (small 1-7/16" bore)
for #5417 (contact www.HotRodCarbs.com).
Installation Notes: H.E.I. will not fit. Recommended intake gasket: Edelbrock #7235. Manifold height: A-3.9", B-4.6".
Carb pad height: 4.25". (see pages 81-82). Port exit dimensions: 1.12" x 1.87".

WWW.EDELBROCK.COM

CARBURETORS

S/B CHEVY

MANIFOLDS

Carburetor Recommendations: Edelbrock 94 #1152 3-bolt. Installation Notes: H.E.I. will not fit. Recommended intake gasket:
Edelbrock #7201. Manifold height: A-5.90", B-5.90". Carb pad height: 5.90" (see pages 81-82). Port exit dimensions: 1.20" x 1.94".

STREET TUNNEL RAM (3500-7500 RPM)

EFI

Throttle Linkage Kit #7097

38

INDEX

PLEASE REFER TO PAGE 212 FOR MORE INFORMATION REGARDING THE EMISSIONS GUIDE.

SPORTSWEAR

l 50-STATE LEGAL l RACING ONLY l PRE-POLLUTION CONTROLLED VEHICLES l STOCK REPLACEMENT l ENGINE SWAP

FUEL PUMPS

EMISSIONS GUIDE

NITROUS

Pro-Flo XT #7137

Description
Page No.
Performer-Plus Camshaft.................................................................................................................................... 121
Performer Cylinder Heads .................................................................................................................................... 91
Roller Timing Set................................................................................................................................................... 127
Cam Gear Drive ..................................................................................................................................................... 126
Valve Springs..................................................................................................................................................117-118
Retainers .........................................................................................................................................................117-118
Fuel Pump........................................................................................................................................................202-205

ACCESSORIES

MATCHING EDELBROCK PARTS FOR S/B CHEVY

WATER PUMPS

Throttle Body Recommendations: Edelbrock #3869 or #38693. Water Outlet: Due to the limited clearance below the
throttle body flange, a low profile thermostat housing must be used such as GM #12342024 (chrome) or Trans-Dapt
#9929. Installation Notes: Recommended gasket: Edelbrock #7201. Use #7235 for #7138 Manifold Dimensions: #7137
A-9.00", B-8.20", C-14.80". #7138 A-9.20", B-8.40", C-14.80" (see pages 81-82).

CRATE ENGINES

PRO-FLO XT EFI (1500-7000 RPM)

Pro-Flo XT intake manifolds are engineered with a large plenum and long tapered runners to deliver
maximum horsepower and broad torque band throughout the rpm range. Choose satin aluminum or
black powder coated finish for 1957-86 S/B Chevy or S/B Chevy with E-Tec/Vortec heads.
Satin
Black
Pro-Flo XT (1986 and earlier) ll ................................................................................#7137 ...................#71373
Pro-Flo XT Vortec ll ..................................................................................................#7138 ...................#71383
Fuel Rail Kit for S/B Chevy (Compatible with Standard or Pico injectors) ..........................................#3627

Pro-Flo XT #71373

SUPERCHARGERS

Carburetor Recommendations: Edelbrock Performer Series carb #1404, 500 cfm, Edelbrock Thunder Series AVS Series carb #1802,
500 cfm, (see pages 13-15) - for forward mount only. Holley #0-9776 (450 cfm) - for sideways mount only. Installation Notes: Top
has vacuum outlet for power brakes. Manifold will accept forward and sideways mounted carbs. Distance from carb center to
carb center: 8.875". H.E.I. ignition will not clear manifold. Recommended intake gasket: Edelbrock #7201. Manifold height (top with
bottom): A-9.00", B-9.60"; Carb pad height: 9.30" (see pages 81-82). Port exit dimensions: 1.12" x 2.12".

POWER PACKAGES KITS

Street Tunnel Ram #7110

Designed for 302-327-350-400 c.i.d. small-block Chevy V8's operating below 7500 rpm where low-end
torque is not a prime factor. Great for engines with slightly modified heads. Will not fit 1987 and later
cast iron heads. Use with cam kit #5002 for low-end torque or cam kit #7102 for top-end power.
Satin
Polished
Street Tunnel Ram (complete manifold - base and top) ll ..................................#7110 ...................#71101
Street Tunnel Ram (base only) .....................................................................................#7067 ..................... N/A
Street Tunnel Ram (top only) ........................................................................................#7032 ..................... N/A
Throttle Linkage for Forward Mounted Carbs ........................................................................................#7097
Throttle Linkage for Sideways Mounted Carbs .....................................................................................#7071
Gasket (included with base and top)..........................................................................................................#6999

CAMSHAFT & VALVETRAIN

Ram Log
Manifold #2150

An exact reproduction of the original Edelbrock Ram Log manifold introduced in the late 1950's
by Vic Sr. for 283-327 small-block Chevy. This manifold features large free-flowing straight runners
for six, 3-bolt carburetors such as our Edelbrock 94 #1152. Oval carb opening measures 1.38" x 2.76".
Includes machined oil fill tube provision and period correct casting features for the best vintage look
and performance for your small-block Chevy street rod application. 94 Carburetor #1152, Linkage Kit #1031,
6x2 Fuel Log Kit #1287 and Oil Fill Tube and Breather #4803 available separately.
Ram Log Manifold for 283-327 Small-Block Chevy (non-EGR) ll....................................................#2150
Linkage Kit for Small-Block Chevy Ram Log Manifold.........................................................................#1031
Small-Block Chevy Six Carburetor Fuel Log Kit ....................................................................................#1287
Ram Log Complete Vintage Manifold and Carb Kit ...............................................................................#2018

MANIFOLDS GASKETS CYLINDER HEADS

RAM LOG INTAKE MANIFOLD

CARBURETORS

Designed for 1987-95 305/350 c.i.d. 5.0/5.7L Chevy throttle body injected (T.B.I.) engines. Accepts all OEM
equipment and small-bore (1-11/16") throttle body injectors only. Computer chip is supplied free of charge
with proof of purchase of manifold, cam and heads. Will not fit Caprice or Buick and Cadillac B bodies.
Performer T.B.I. (EGR) l .............................................................................................................................#3704
Injector Recommendations: Use stock Throttle Body Injection unit. Installation Notes: Recommended intake gasket:
GM #10159409. Manifold height: A-3.70", B-5.10"; TBI pad height: 4.40", .250" taller than stock (see pages 81-82). Port exit
dimensions: 1.13" x 1.87". Camshaft Recommendations: Performer Plus #3702. See page 121 for specifications.
Performer T.B.I. EGR #3704

VICTOR JR. SPORTSMAN 2V 23 (3500-7000 RPM)

Victor Jr. Sportsman 2V #2901

EFI

SUPERCHARGERS

VICTOR JR. 23 (3500-8000 RPM)

Victor Jr. #2975

Victor Jr. with

Nitrous #72975

These versatile manifolds are excellent for many applications from drag to circle track racing.
They provide maximum performance for engines with standard port location, iron and aluminum
cylinder heads. The low-profile of the #2975 works well in applications with minimal hood clearance
and where 1" or 2" spacers can be used for performance tuning. When carb spacers are not allowed,
the #2999 should be used. #72975 features a pre-assembled ready to bolt-on direct port nitrous system
out-of-the-box, see page 30. The Victor Jr. Port Matched manifold has CNC-blended port exits that
match any competition head using Fel-Pro gasket #1206.
Victor Jr. l....................................................................................................................................................#2975
Victor Jr. with Pre-Assembled Direct Port Nitrous System l ..........................................................#72975
Victor Jr. with EnduraShine Finish l .....................................................................................................#29754
Victor Jr. Port Matched l..........................................................................................................................#2900
Victor Jr. Tall (1" taller) l ...........................................................................................................................#2999
Installation Notes: Recommended intake gasket: Edelbrock #7201 or Fel-Pro #1206. See pages 81-82 for manifold reference dimensions.

WATER PUMPS

CRATE ENGINES

The Victor Jr. Sportsman 2V manifold #2901 is a dedicated design for the 2V racer and provides outstanding
performance from 3500 to 7000 rpm. The runners are sized especially for 2V racing engines for the ultimate
combination of torque and horsepower with better fuel distribution. An extra tall carburetor pad eliminates the
need for spacers, and rear water outlets allow for a four corner coolant flow path if desired. It features dual
distributor clamp locations, and port exits are sized to match cast iron Chevrolet Bowtie heads. The Victor Jr.
Sportsman 2V #2912 for Vortec heads has all the features of #2901 for the racer using the popular GM (Vortec
L31) cast iron cylinder heads. Both manifolds accept standard restrictor plates and carb adapters.
Victor Jr. Sportsman 2V l .........................................................................................................................#2901
Victor Jr. Sportsman 2V for Vortec Heads l..........................................................................................#2912
Replacement Carb Base Gaskets for Victor Jr. Sportsman 2V (6 gaskets) .......................................#6940
Carburetor Recommendations: Holley #0-4412 (500 cfm). Installation Notes: Recommended intake gasket: Edelbrock
#7217 or Fel-Pro #1206 for #2901; for #2912 use Edelbrock #7235 or GM #89017465.
See pages 81-82 for manifold reference dimensions.

BOWTIE II VICTOR JR. 23 (3500-8000 RPM)

ACCESSORIES

Bowtie II intakes provide maximum performance for engines using unported Chevrolet Bowtie cast
iron heads #14011058, #14011034 and #10134392. The intake manifold port exits match up to these heads
with little or no matching required. This is ideal for classes where rules restrict the porting of intake
manifolds to match cylinder heads. The #2972 can be tuned for greater performance gains when used
with 1" or 2" carb spacers.
Bowtie II Victor Jr. l..................................................................................................................................#2972

NITROUS

Installation Notes: Recommended intake gasket: Edelbrock #7217. See pages 81-82 for manifold reference dimensions.

FUEL PUMPS

MATCHING EDELBROCK PARTS FOR S/B CHEVY

Bowtie II Victor Jr. #2972

SPORTSWEAR
INDEX

S/B CHEVY STREET & RACE

PERFORMER T.B.I. (IDLE-5500 RPM)

KITS POWER PACKAGES

CAMSHAFT & VALVETRAIN

CYLINDER HEADS GASKETS MANIFOLDS

MANIFOLDS

39

Description
Page No.
Performer Cylinder Heads .................................................................................................................................... 91
Roller Timing Set................................................................................................................................................... 127
Cam Gear Drive ..................................................................................................................................................... 126
Valve Springs..................................................................................................................................................117-118
Retainers .........................................................................................................................................................117-118
Fuel Pump........................................................................................................................................................202-205

WWW.EDELBROCK.COM

CARBURETORS

S/B CHEVY RACE

MANIFOLDS

Super Victor #2925

Designed for heads with a standard port location, the runners match flat floor entry 23 heads. Carb pad
height is 5-1/2" (from end seals) and overall, the #2925 is about one-inch taller than our Victor Jr. intake #2975.
Runners have a 2.80 square-inch cross-section. #72925 features a pre-assembled ready to bolt-on direct port
nitrous system out-of-the-box, see page 30. Super Victor CNC #2825 is CNC machined in all critical areas,
plenum chamber, port exits, divider walls and runner roofs for optimum performance and out-of-the-box
convenience. For standard displacement engine builds.
Super Victor for 23 Heads l ....................................................................................................................#2925
Super Victor with Pre-Assembled Direct Port Nitrous System l ....................................................#72925
Super Victor for 23 Heads with EnduraShine Finish l .....................................................................#29254
Super Victor CNC l.....................................................................................................................................#2825

SUPER VICTOR 23 RAISED PORT (3500-8000 RPM)

Installation Notes: Recommended intake gasket: Fel-Pro #1263. See pages 81-82 for manifold reference dimensions.

SUPER VICTOR 4500 23 (3500-8000 RPM)

Super Victor 4500 #2970

Installation Notes: Minimum recommended intake gasket Edelbrock #7217. Manifold Ht: 6.56" (A & B).
Port exit dimensions: 1.28" x 2.19". See pages 81-82 for manifold reference dimensions.

ACCESSORIES

Super Victor II Manifold #2892

EMISSIONS GUIDE

PLEASE REFER TO PAGE 212 FOR MORE INFORMATION REGARDING THE EMISSIONS GUIDE.

40

INDEX

l 50-STATE LEGAL l RACING ONLY l PRE-POLLUTION CONTROLLED VEHICLES l STOCK REPLACEMENT l ENGINE SWAP

SPORTSWEAR

Installation Notes: Recommended intake gasket: Edelbrock #7201 or Fel-Pro #1205, #1206.
See pages 81-82 for manifold reference dimensions.

FUEL PUMPS

Ideal for high-rpm drag race applications, the Victor E has a larger and deeper plenum than the #2975.
It provides maximum power in the higher rpm range for engines with standard port location iron and
aluminum heads. Runners have a tapered cross-section, and plenty of material at the manifold port exit
allows port matching to the small port heads used in NHRA Super Stock classes. 1" or 2" spacers can
be used for performance tuning. The large plenum and runner volume of this manifold is also ideal for
alcohol-fueled applications.
Victor E l ......................................................................................................................................................#2978
Victor E EFI l...............................................................................................................................................#29785
Victor E EFI Fuel Rail Kit (Compatible with Standard or Pico injectors) ..............................................#3630

NITROUS

VICTOR E 23 (4500-8500 RPM)

Victor E #2978

WATER PUMPS

This small-block Chevy manifold is designed to work with modern high flowing 23 heads on large cubic
inch applications. The runner area at the plenum is 25% larger than our Super Victor #2925, and the port
exits are machine-matched for use with a Fel-Pro #1206 intake gasket. Out-of-the-box modern casting
techniques create smooth, thin and extended divider walls for out-of-the-box performance. This intake
is machined for 4150 style carburetors. Can be port matched up to #1207 (1.38" x 2.28").
Super Victor II Small-Block Chevy l ......................................................................................................#2892

CRATE ENGINES

SUPER VICTOR II (4000-8000 RPM)

EFI

Installation Notes: Recommended intake gasket: Edelbrock #7217, Fel-Pro #1206 or larger (for #2970) and #1263
(for #2971). See pages 81-82 for manifold reference dimensions.

SUPERCHARGERS

Designed for small-block Chevys with 4500 Series carburetors and 23 heads, the Super Victor #2970 is
for standard port locations and #2971 is for raised port heads. They have a large runner cross-sectional
area (3.2 square inches) and a highly efficient cloverleaf plenum design. In dyno tests on a 358-inch
small-block, #2970 made 10 horsepower more than the best competitors manifold!
Super Victor 4500 for 23 Heads l ...........................................................................................................#2970
Super Victor 4500 for Raised Port 23 Heads l.....................................................................................#2971

POWER PACKAGES KITS

Super Victor 23 Raised Port #2926

This manifold provides the latest racing technology for groups like the NASCAR Touring and Hooters Classes.
Runners have a 2.80 square-inch cross-section. Compatible with raised-port heads such as Pontiac
#10045434/#10033867 and Chevrolet heads #10051101 and #25534351.
Super Victor for Raised Port 23 Heads l ..............................................................................................#2926

CAMSHAFT & VALVETRAIN

Carburetor Recommendations: Use appropriate standard flange square-bore racing carb.

Installation Notes: Recommended intake gasket: Edelbrock #7201 For #2925/#29254 and Fel-Pro #1206 for #2825.
See pages 81-82 for manifold reference dimensions.

MANIFOLDS GASKETS CYLINDER HEADS

SUPER VICTOR 23 (3500-8000 RPM)

CARBURETORS

A tunnel ram manifold for the control of high velocity mixture flow, especially above 8500 rpm, it has
removable top mounts for various carburetors. Suited to drag race engines operating at 6500-10,000 rpm
and race boat engines above 7000 rpm. Does not fit raised port cylinder heads or 1987 and later cast
iron heads.
Victor Ram (base only) l ............................................................................................................................#7070
Victor Ram - 2 Standard-Flange, Sideways (top only) l......................................................................#7073
Throttle Linkage............................................................................................................................................#7071
Top Gasket (included with top) ...................................................................................................................#6988
Victor Ram #7070 with Top #7073

Carburetor Recommendations: Use appropriate racing carburetors. Installation Notes: Distance from carburetor center
to carburetor center: 8.88". Manifold top with bottom height: 9.25". H.E.I. ignition will not clear manifold. See pages 81-82
for manifold reference dimensions. Recommended intake gasket: Fel-Pro #1206.

VICTOR 18 ONE-PIECE DESIGN (5000-8500 RPM)

KITS POWER PACKAGES

The Victor 18 #2959 features intake runners with a large cross-section area of 3.2 square-inches for
max high-end horsepower in engines operating from 5000 to 8500 rpm with GM or Edelbrock 18 heads.
Features 1/2" female pipe bosses over rear water outlets to allow for customization of cooling system and
dual distributor clamp locations for ease of timing adjustment. Relief for center water outlets included.
Victor 18 3.2 l.............................................................................................................................................#2959
Water By-Pass Kit ........................................................................................................................................#8095
Victor 18 #2959

Installation Notes: Recommended intake gasket: Edelbrock #7218 (#2995), Fel-Pro #1282.
See pages 81-82 for manifold reference dimensions.

VICTOR 15-18 CHEVY (5000-8500 RPM)

EFI

SUPERCHARGERS

Victor Glidden #2859 is for all-out nitrous-assisted drag race applications. Designed with noted drag racer
Billy Glidden, it features intake runners with a large cross-section area of 3.2 square-inches for maximum
high-end horsepower in engines operating from 5000 to 8500 rpm with GM or Edelbrock 18 heads.
Carb mount flange and plenum are machined for 4500 Series carburetors and require port matching and
blending prior to use.
Victor Glidden (for 15 and 18 Chevy with 4500 Series carburetor) l ...............................................#2859

CRATE ENGINES

Victor Glidden 18 #2859

Installation Notes: Recommended intake gasket: Edelbrock #7218 or Fel-Pro #1282.

See pages 81-82 for manifold reference dimensions.

VICTOR SB2 DOMINATOR SPIDER (5000-8500 RPM)

ACCESSORIES

WATER PUMPS

Victor SB2 #2883 and #2884 unleash the true potential of SB2 cylinder heads. #2884 is based off a
Keith Dorton modified manifold #2866, which gained 60 HP over the 4150 version. #2883 is slightly smaller
with material added for maximum porting options. These manifolds can be used with Edelbrock SB2
valley plate #2853 which has integrated water passages for optimal water distribution management.
Victor SB2 Spider with Dominator flange (small-port) l.....................................................................#2883
Victor SB2 Spider with Dominator flange Large Port l ......................................................................#2884
Victor SB2 Valley Plate ...............................................................................................................................#2853

NITROUS

Victor SB2 Spider #2883

Installation Notes: Recommended intake gasket: Fel-Pro #1237-3 (spider), #1242 (base).
See pages 81-82 for manifold reference dimensions.

VICTOR GLIDDEN 15-18 SPIDER (5000-8500 RPM)

Intended for 375 c.i. and up high output drag race engines, this manifold was developed in conjunction
with noted drag racer Billy Glidden and is specifically designed to complement the flow characteristics
of fully ported 18 and 15 cylinder heads. It features a 4500 series carb flange, and the dividers are pulled
back to increase plenum size and shorten the runners for improved high rpm performance. The runners
are wider at the plenum, producing approximately 3.6 square inches area at the opening.
Victor Glidden Spider-Type Manifold (for 15 and 18 heads) l ........................................................#2858
Victor 18 Base (base of two-piece manifold) l.....................................................................................#2992

FUEL PUMPS
SPORTSWEAR
INDEX

S/B CHEVY RACE

VICTOR RAM 23 (6500-10,000 RPM)

CAMSHAFT & VALVETRAIN

CYLINDER HEADS GASKETS MANIFOLDS

MANIFOLDS

Victor Glidden Spider #2858

41

Installation Notes: Must be used with Edelbrock base plate #2992. Recommended intake gasket: Edelbrock #7218 or
Fel-Pro #1282 (spider and manifold), #1254 (base). See pages 81-82 for manifold reference dimensions.

WWW.EDELBROCK.COM

CARBURETORS

S/B CHEVY RACE

MANIFOLDS

The Victor Two-Piece manifolds were developed to simplify CNC manifold porting. They are supplied
in right and left halves that can be machined and then assembled with the supplied bolts and o-ring.
Victor Two-Piece manifolds are available for various applications from standard 9" deck 18 cylinder
heads to 9.3" deck Clements/Dart 13 cylinder heads as well as SB2 and ROX engines.
Applications

Two-piece Manifold #28468

VICTOR E-TEC EFI (2500-8000 RPM)

EFI

Installation Notes: Recommended intake gasket: Edelbrock #7235 or GM #89017465.

See pages 81-82 for manifold reference dimensions.

Installation Notes: Recommended intake gasket: Edelbrock #7206, #7207, (see pages 85-86 for gasket specs).
See pages 81-82 for manifold reference dimensions.

EMISSIONS GUIDE

PLEASE REFER TO PAGE 212 FOR MORE INFORMATION REGARDING THE EMISSIONS GUIDE.

42

INDEX

l 50-STATE LEGAL l RACING ONLY l PRE-POLLUTION CONTROLLED VEHICLES l STOCK REPLACEMENT l ENGINE SWAP

SPORTSWEAR

Super Victor Vortec Bowtie #2814

FUEL PUMPS

Designed specifically for use with GM cast-iron Vortec Bowtie cylinder heads #25534351 (185cc) and
#25534371 (215cc). It features raised runners that closely match the port shape and location of these
heads, and is the best choice for racing classes that prohibit modification to the manifold. It features the
original 6-bolt pattern and 7/8" inch of additional carb pad height (compared to previous raised-runner
manifolds such as #2926).
Super Victor Vortec Bowtie l...................................................................................................................#2814

NITROUS

SUPER VICTOR VORTEC BOWTIE (4000-8000 RPM)

ACCESSORIES

Installation Notes: Recommended intake gasket: Edelbrock #7235 or GM #89017465.

See pages 81-82 for manifold reference dimensions.

WATER PUMPS

Designed for racers using Vortec cast iron or Edelbrock E-Tec aluminum cylinder heads, this manifold
offers the same awesome top-end horsepower, throttle response and advanced design features as
Super Victor #2925. Designed specifically to enhance the performance of the Vortec cylinder heads
(also known as L31), the #2913 is the most powerful intake available for these Chevy production heads.
Runners have a 2.60 square-inch cross-section.
Super Victor for E-Tec/Vortec Heads l...................................................................................................#2913
Super Victor EFI for E-Tec/Vortec Heads l...........................................................................................#29135
Super Victor EFI Fuel Rail Kit (compatible with standard injectors).....................................................#3631

CRATE ENGINES

SUPER VICTOR VORTEC (4000-8000 RPM)

Super Victor Vortec #2913

SUPERCHARGERS

Victor E-TEC EFI Manifold #29145

The 29145 is a Vortec/E-Tec version of our popular Victor E 23 EFI manifold and is intended for EFI
applications like our Pro-Flo 3 EFI system. This manifold features a similar deep plenum and tapered
cross-sections like the Victor E 23 and is compatible with standard, square-bore, throttle bodies. This
manifold is one inch shorter than the existing Super Victor E-Tec EFI #29135. It also has provisions for
water bypass so it can be used on Vortec engine blocks and accepts OEM alternator brackets.
Victor E-Tec EFI l.......................................................................................................................................#29145
Victor E EFI Fuel Rail Kit (Compatible with Standard or Pico injectors)...............................................#3630

POWER PACKAGES KITS

Conventional 18 Cylinder Heads

Brodix, All Pro & Dart
4.4"
0.747"
9.080"
l
#2855
#2844
(13 hi-port designs)
4.5"
Standard
9.080"
l
Brodix 13
#2855
#2840
Conventional 18 cylinder heads,
4.4"
0.989"
9.300"
l
#2856
#28468
Brodix, All Pro & Dart
4.5"
0.990"
9.300"
l
Brodix 13
#2856
#28408
4.5"
Standard
9.080"
l
Brodix 10
#2855
#2845
4.5"
0.990"
9.500"
l
Brodix 10
#2856
#28458
4.4"
Standard
9.080"
l
SB2
#2853
#2847
4.4"
0.990"
9.500"
l
SB2
#28538
#28478
4.5"
Standard
9.080"
l
ROX
#2851
#2848
4.5"
1.070"
9.500"
l
ROX
#28518
#28488
Installation Notes: Conventional 18 applications will require additional machining of manifold and valley plate for
desired clearance when using valley plate #2855. Valley plate #2992 can also be used when less machining is desired.
When using thick flange manifolds, machining of backside of flange is recommended for weight reduction.

CAMSHAFT & VALVETRAIN

Valley
Plate #2855

Bore Flange Maximum Emissions Valley Plate Manifold Part

Center Thickness Deck Height Code
Part No.
No.
4.4"
Standard
9.000"
l
#2855
#2846

MANIFOLDS GASKETS CYLINDER HEADS

VICTOR TWO-PIECE DESIGN (5000-8500 RPM)

CARBURETORS
CYLINDER HEADS GASKETS MANIFOLDS

MANIFOLDS

LT1/LT4 AND LS

CHEVROLET LT1 AND LT4 V8

RPM AIR-GAP (1500-6500 RPM)

RPM Air-Gap
for LT4 #7109

Utilizing the proven short runner tunnel-ram style, both of these manifolds provide the next step up
in performance for LT1 and LT4 owners. Our patented Air-Gap design delivers a cooler and denser
air stream for maximum power output. These intake manifolds are designed to work with either a
52mm throttle body or 58mm throttle body. They also accept early and late OEM LT1 throttle bodies
and fuel rails. #7107 is designed to match #61905/#61919 LT1 cylinder heads, and #7109 is designed for
#61929/#61939 LT4 RPM cylinder heads. Both will also work with OEM LT1 and LT4 heads with minor
head port matching.
RPM Air-Gap for LT1 (with satin finish) l ................................................................................................#7107
RPM Air-Gap for LT4 (with red powder coating) l ................................................................................#7109

CAMSHAFT & VALVETRAIN

Installation Notes: Recommended intake gasket: LT1: Edelbrock #7243 or GM #12524653, LT4: Edelbrock #7244 or
GM #12367777, LT1 port exit dimensions: A-2.06" x B-1.15", LT4 port exit dimensions: A-2.12" x 1.20".
See pages 81-82 for manifold reference dimensions.

CHEVROLET LS1 V8

KITS POWER PACKAGES

PERFORMER RPM LS1 (1500-6500 RPM)

SUPERCHARGERS

Performer RPM LS1 Manifold

and Timing Control Module #7118

This powerful manifold is designed for the popular Chevrolet LS1 (5.7L) small-block V8 originally used in
1997 and later Corvettes and 1998-02 Camaros and Firebirds. It also fits the Corvette LS6 engine and any
other Gen III engine including the LM7 (5.3L), LR4 (4.8L), and LQ4 (6.0L). It allows the use of a carburetor
on these originally computer-controlled engines, offering maximum power and a broad torque curve from
1500 to 6500 rpm. The Performer RPM LS1 is available with an optional wiring harness and electronic
Timing Control Module made by MSD; this ignition module is for LS1 (24x) ignitions only and works
with OE sensors to fire the Coil-on-Plug ignition system and offers a choice of six timing curves. A special
throttle and trans bracket that works with 700-R4, 2004-R and Turbo 350 transmissions is included, making
the LS1 engine an easy retro-fit into any muscle car, street rod or marine application.
Performer RPM LS1 Manifold & Timing Control Module (non-EGR) l ........................................... #7118 (A)
Performer RPM LS1/LS2 Manifold Only (non-EGR) l ......................................................................... #71187
LS1 (24x) Timing Control Module ............................................................................................................ #91238 (A)

WATER PUMPS

CRATE ENGINES

EFI

Carburetor Recommendations for the Performer RPM LS1: Edelbrock Thunder Series AVS or Performer Series carb,
600-800 cfm (see pages 13-15). Installation Notes: Uses LS1/LS6 style individual port o-ring seals or Edelbrock #7386.
Crankshaft sleeve #HP3795 and Flexplate #HP4004 is recommended when using a TH350, TH400 or 700R4 on a LS1;
these items are available through Hughes Performance retailers or you can call Hughes at 800-274-RACE.
Manifold height: A-4.50", B-5.40"; Carb pad height: 4.95" (see pages 81-82). Port exit dimensions: .98" x 2.72".
Note (A): LS1 Timing Control Module #91238 works on LS1 24x reluctor wheel (crank trigger) applications only; LS2
applications with 58x reluctor (crank trigger) requires MSD #6012 ignition controller. Please contact MSD tech for details
(915) 857-5200 or www.msdperformance.com. LS1 (24x) applications can be recognized by the rear mounted cam position
sensor which is black in color, while LS2 (58x) cam sensor is mounted in the timing cover and is gray in color.

Carburetor Recommendations: Edelbrock Thunder Series AVS or Performer Series carb, 500 cfm (see pages 13-15).
Installation Notes: Uses LS1/LS6 style individual port o-ring seals or Edelbrock #7386. Crankshaft sleeve #HP3795 and
Flexplate #HP4004 is recommended when using a TH350, TH400 or 700R4 on a LS1; these items are available through
Hughes Performance retailers or you can call Hughes at 800-274-RACE. Manifold height: A-5.05", B-5.64"; Carb pad
height: 5.35" (see pages 81-82). Port exit dimensions: .98" x 2.72".

INDEX

SPORTSWEAR

ACCESSORIES
NITROUS

Get late-model muscle of the popular Gen III and the classic look of dual-quad carbs. Designed for LS1,
LS6, LM7 (5.3L), LR4 (4.8L), and LQ4 (6.0L) engines, the RPM Air-Gap LS1 Dual-Quad delivers outstanding
performance from 1500 to 6500 rpm. Included with the #7518/#75184 is an electronic timing module that
picks up MAP, crank position, and cam position in order to drive the stock LS1 Coil-on-Plug ignition
system. The #75187 (manifold only) can be used on LS2 applications when matched with MSDs #6012 LS2
ignition controller (available through MSD Performance). Also available, complete carb and manifold kits
on page 135. Carb center-to-center measurement is 6-7/16".
RPM Air-Gap Dual-Quad Kit w/Timing Control Module for LS1 (non-EGR) l ............................... #7518
RPM Air-Gap Dual-Quad LS1/LS2 Manifold Only (no electronics) l ............................................... #75187 (A)
RPM Air-Gap Dual-Quad Kit with EnduraShine Finish for LS1 (non-EGR) l ................................. #75184
LS1 (24x) Timing Control Module ............................................................................................................ #91238 (A)

FUEL PUMPS

RPM AIR-GAP DUAL-QUAD LS1 (1500-6500 RPM)

LS Timing Control Module #91238

RPM Air-Gap Dual-Quad Kit #7518

43

Note (A): LS1 Timing Control Module #91238 works on LS1 24x reluctor wheel (crank trigger) applications only; LS2
applications with 58x reluctor (crank trigger) requires MSD #6012 ignition controller. Please contact MSD tech for details
(915) 857-5200 or www.msdperformance.com. LS1 (24x) applications can be recognized by the rear mounted cam position
sensor which is black in color, while LS2 (58x) cam sensor is mounted in the timing cover and is gray in color.

WWW.EDELBROCK.COM

CARBURETORS

CHEVY LS

MANIFOLDS

Pro-Flo XT LS1 #7139

The Pro-Flo XT LS1 EFI manifold is engineered with a large plenum and tapered runners to deliver
maximum horsepower and broad torque band throughout the rpm range (1500-7000 rpm). Features a 90mm
throttle bore opening and 2.75" port exit height. This manifold produced 30 more horsepower over a stock
LS6 manifold at 6500 rpm. #7139 Accepts Pro-Flo XT throttle body #3869 or adapter #2737 and standard LS1
throttle bodies. #7140 (LS2) accepts GM OEM 90mm or Edelbrock #3869 throttle bodies. Compatible with
LS1 Fuel Rail Kit #3629 (sold separately).
Pro-Flo XT LS1 Series Gen III Manifold ll ..........................................................................................#7139
Pro-Flo XT LS1 Series Gen III Manifold with Black Powder Coating Finish ll .........................#71393
Pro-Flo XT LS2 Series Gen III Manifold ll ..........................................................................................#7140
Pro-Flo XT LS2 Series Gen III Manifold with Black Powder Coating Finish ll .........................#71403
Fuel Rail Kit for LS Series Chevy (compatible with Standard or Pico injectors)................................#3629

Fuel Rail Kit #3629

44

INDEX

PLEASE REFER TO PAGE 212 FOR MORE INFORMATION REGARDING THE EMISSIONS GUIDE.

SPORTSWEAR

l 50-STATE LEGAL l RACING ONLY l PRE-POLLUTION CONTROLLED VEHICLES l STOCK REPLACEMENT l ENGINE SWAP

FUEL PUMPS

EMISSIONS GUIDE

NITROUS

Fuel Rail Kit #3638

Installation Notes: #28095 and #28097 uses Fel-Pro #1312-3, and #28097 uses LS1/LS6 style individual port o-ring seals
or Edelbrock #7386. Crankshaft sleeve #HP3795 and Flexplate #HP4004 is recommended when using a TH350, TH400 or
700R4 on a LS1; items are available through Hughes Performance retailers or call Hughes at 800-274-RACE. See pages
81-82 for reference dimensions. Manifold height: A-6.07", B-6.07"; Carb pad height: 6.07" (see pages 81-82). Port exit
dimensions: 1.08" x 2.74".
Note (A): LS1 Timing Control Module #91238 works on LS1 24x reluctor wheel (crank trigger) applications only;
LS2 applications with 58x reluctor (crank trigger) requires MSD #6012 ignition controller. Please contact MSD tech for
details (915) 857-5200 or www.msdperformance.com. LS1 (24x) applications can be recognized by the rear mounted cam
position sensor which is black in color, while LS2 (58x) cam sensor is mounted in the timing cover and is gray in color.

ACCESSORIES

Super Victor LS1/LS2 #28097

CARBURETED OR COMPETITION EFI FOR GM GEN III

Offering greater air flow potential for even bigger power gains, this manifold has been accepted by
NASCAR for use in the Grand National West/Grand National East series. The carb mount pad is 1.12"
taller than the Victor Jr. LS1, and the port exits have been increased to 1.08" x 2.74". Edelbrock offers
the optional LS1 Timing Control Module #91238 to drive the stock LS1 Coil-on-Plug ignition system.
LS2 applications require MSDs #6012 LS2 ignition controller (available through MSD Performance).
Super Victor EFI LS1/LS2 manifold #28095 is for high-output competition EFI systems and features
machined injector bosses. Its compatible with either our #3878 4V throttle body series or any of our
square-bore EFI elbows, see page 167.
Super Victor LS1/LS2 Manifold (for use with carburetor) l ...............................................................#28097
Super Victor LS1/LS2 EFI Manifold l .....................................................................................................#28095
LS1 (24x) Timing Control Module ............................................................................................................#91238 (A)
Victor Jr. LS1 EFI Fuel Rail Kit (standard injectors with stands) ..........................................................#3638

WATER PUMPS

SUPER VICTOR LS1 (3500-8000 RPM)

CRATE ENGINES

Note (A): LS1 Timing Control Module #91238 works on LS1 24x reluctor wheel (crank trigger) applications only; LS2
applications with 58x reluctor (crank trigger) requires MSD #6012 ignition controller. Please contact MSD tech for
details (915) 857-5200 or www.msdperformance.com. LS1 (24x) applications can be recognized by the rear mounted cam
position sensor which is black in color, while LS2 (58x) cam sensor is mounted in the timing cover and is gray in color.

EFI

Installation Notes: Uses LS1/LS6 style individual port o-ring seals or Edelbrock #7386. Crankshaft sleeve #HP3795 and
Flexplate #HP4004 is recommended when using a TH350, TH400 or 700R4 on a LS1; these items are available through
Hughes Performance retailers or you can call Hughes at 800-274-RACE. See pages 81-82 for reference dimensions.
Manifold height: A-4.95", B-4.95"; Carb pad height: 4.95" (see pages 81-82). Port exit dimensions: .98" x 2.74". See page 167
for EFI elbow applications.

SUPERCHARGERS

FOR CHEVROLET LS1 V8 CARBURETED APPLICATIONS

This compact single plane intake is capable of supporting up to 600 hp. The Victor Jr. LS1 accepts a
square bore carburetor and includes an electronic timing module that picks up MAP, crank position,
and cam position in order to drive the stock LS1 Coil-on-Plug ignition system. The module offers a
choice of 6 built-in timing curves, each tailored for engine displacement, cam profiles, and fuel grades.
The #29087 (manifold only) can be used on LS2 applications when matched with MSDs #6012 LS2
ignition controller (available through MSD Performance). Includes a throttle bracket designed to work
with 700R-4, 200-4R and Turbo 350 transmissions. Most applications will require hood modification.
Victor Jr. LS1 Carbureted Intake Manifold with Timing Control Module ll .............................#2908 (A)
Victor Jr. LS1/LS2 Carbureted Intake Manifold Only ll ..................................................................#29087
Victor Jr. LS1/LS2 Competition EFI Intake Manifold Only ll ..........................................................#29085
Victor Jr. LS1/LS2 Competition EFI Intake Manifold and Fuel Rail Kit ll ....................................#29086
LS1 (24x) Timing Control Module ............................................................................................................#91238 (A)
Victor Jr. LS1 EFI Fuel Rail Kit (standard injectors with stands) ..........................................................#3638

POWER PACKAGES KITS

Victor Jr. LS1 #2908

VICTOR JR. LS1 (3500-7500 RPM)

CAMSHAFT & VALVETRAIN

Throttle Body Recommendations: Edelbrock #3869 or #38693. Installation Notes: Recommended gasket: Uses LS1/LS6
style individual port O-ring seals or Edelbrock #7386. #7139 Manifold Dimensions: A-10.20", B-10.00", C-16.90", D-3.2", E-15.
#7140 Manifold Dimensions: A-9.70", B-10.00", C-16.90", D-3.1", E-15. See pages 81-82 for manifold reference dimensions.

MANIFOLDS GASKETS CYLINDER HEADS

PRO-FLO XT LS EFI (1500-7000 RPM)

CARBURETORS

Performer RPM LS3 #71197

Designed for Gen IV engines with LS3, L92 and L76 rectangular port cylinder heads. The Performer RPM
LS3 is ideal for anybody looking to build a carbureted LS3 engine with an operating range between
1,500 - 6,500 rpm. It allows the use of a carburetor on these originally computer-controlled engines,
offering maximum power and a broad torque curve. It features a high-rise dual-plane design combined
with a plenum that has been optimized for square-bore carburetors. Our advanced casting techniques
allowed us to create a lightweight casting that weighs only 14 lbs.
Performer RPM LS3 includes a provision for mounting an MSD Ignition Timing Control Module #6012,
including passages for routing the coil wire harness underneath the plenum, for a clean look. A special
throttle and trans bracket that works with 700R-4, 200-4R and Turbo 350 transmissions is also included,
making this an easy retro-fit into any muscle car, street rod or marine application.
Performer RPM LS3 Intake Manifold Carbureted l ................................................................................#71197

KITS POWER PACKAGES

Carburetor Recommendations: Edelbrock Thunder Series AVS or Performer Series (600-800 cfm) Carburetor.
Installation Notes: Uses LS3/ L92/L76 style individual port o-ring seals GM PN19256623. Manifold height: A-4.66", B-5.56";
Carb pad height: 5.11"; CA-3. Carb height (CH) for this manifold is measured from the valley cover flange to the carb
pad. Port exit dimensions: 1.16 x 2.40.

SUPER VICTOR LS3 (3500-7500 RPM)

CRATE ENGINES

EFI

SUPERCHARGERS

FOR LS GEN IV WITH LS3 CYLINDER HEADS

Designed for Gen IV LS engines equipped with L3/L92 and L76 cylinder heads, these new Super Victor
intake manifolds are ideal for anyone building a 700+ hp carbureted or EFI large displacement racing
engine operating between 3,500 - 7,500 rpm.
These new Super Victor intake manifolds are designed with 24% larger runners than our Victor Jr. #28457
along with a larger 4500 style plenum. The large plenum makes these intake manifolds ideal for nitrous
and forced induction applications. They also feature tapered runners for increased flow at high rpm.
Available with a 4150 or 4500 series carburetor flange. The Super Victor 4500 series manifolds can
accommodate bores up 2.25. Super Victor #28215 and #28265 include machined fuel injector bosses.
A carburetor mounted style throttle bracket is recommended.
Super Victor LS3 Carbureted Manifold for 4500 Series Carbs l .......................................................#2821
Super Victor LS3 EFI Manifold for 4500 Style Throttle Bodies l ......................................................#28215
Super Victor LS3 Carbureted Manifold for 4150 Series Carbs l .......................................................#2826
Super Victor LS3 EFI Manifold for 4150 Style Throttle Bodies l ......................................................#28265
Super Victor LS3 EFI Fuel Rail Kit (Standard injectors, -8 AN ends) ..................................................#3655

WATER PUMPS

Super Victor LS3 #2821

Fuel Rail Kit #3655

Carburetor Recommendations: Use appropriate 4150/4500 Series racing carburetor.

Throttle Body Recommendations: Edelbrock #38783 or #38883. Fuel Rail Recommendations: Use Edelbrock fuel rail kit #3655.
Installation Notes: Uses LS3/L76/LS92 style individual port o-ring seals GM PN19256623. Manifold height: A-7.67", B-7.67";
Carb pad height: 7.67". Carb height (CH) for this manifold is measured from the valley cover flange to the carb pad. Port exit
dimensions machine matched: 1.27 x 2.58.

CROSS-RAM LS3 (1500-7000 RPM)

FUEL PUMPS

NITROUS

ACCESSORIES

Designed for Gen IV engines with LS3, L92 and L76 rectangular port cylinder heads. The Cross-Ram LS3 is
ideal for anybody looking to combine great looks and outstanding performance between 1,500 - 7,000 rpm.
The unique dual-plenum design features 13" long runners with flanges that will accept two, 90mm GM
LS3 throttle bodies. The unique cross-ram dual-plenum design is ideal for twin turbo applications. When
matched with high flowing air filters and inlet tubes, the dual-plenum system gives neck-snapping
performance with plenty of options for engine builders and tuners. Dyno testing resulted with gains of 27
horsepower and 28 ft-lbs. of torque over a popular aftermarket manifold.
Cross-Ram LS3 Manifold l ...........................................................................................................................#7141
Cross-Ram LS3 Fuel Rail Kit (Standard injectors, -8 AN ends) ............................................................#3654
Throttle Body Recommendations: 2x GM LS# 90mm.
Fuel Rail Recommendations: Use Edelbrock fuel rail kit #3654.
Installation Notes: Uses LS3/L76 style individual port o-ring seals GM PN19256623. Plenum gaskets use
Edelbrock #7271. Throttle body adapters, use Edelbrock #2736. Manifold height: A-9.35", B-8.01", C-17.50", D-2.65"
E-0 vertical x 5 inward; Port exit dimensions: 1.19 x 2.48.

SPORTSWEAR
INDEX

CHEVY LS

PERFORMER RPM LS3 (1500-6500 RPM)

CAMSHAFT & VALVETRAIN

CYLINDER HEADS GASKETS MANIFOLDS

MANIFOLDS

45

WWW.EDELBROCK.COM

CARBURETORS

CHEVY LS & W-SERIES

MANIFOLDS

FOR LS GEN IV WITH L92 CYLINDER HEADS

Designed for Gen IV LS engines equipped with LS3/L92 and L76 cylinder heads, this manifold is for EFI or
carbureted racing applications operating between 3500-7500 rpm. This manifold uses a standard squarebore carb flange that is compatible with both Edelbrock EFI intake elbows and single bore 90mm throttle
body or four-barrel #4150 throttle bodies. L92 heads are only compatible with a 4.00" and larger bore
diameters; smaller bores (including most 5.7L blocks) will require valve reliefs cut into the block. EFI manifold
#28455 has additional bosses and machining that allow for the use of fuel injectors when combined with the
#3638 fuel rail kit (sold separately). The L76, L92 and the LS3 all use the same cylinder head.
Victor Jr. LS Series Gen IV Carbureted Manifold for L92 Heads ll ..............................................#28457
Victor Jr. LS Series Gen IV EFI Manifold for L92 Heads ll .............................................................#28455
Victor Jr. LS1 EFI Fuel Rail Kit (standard injectors with stands) ..........................................................#3638
Throttle Body Recommendations: Edelbrock #38783. Installation Notes: Uses LS3/L76/L92 style individual port O-ring
seals GM PN19256623, L92 heads are intended for 4.00" bores and will not work with 5.7L blocks without valve reliefs.
Manifold Dimensions: R-1.85", F-0.57", H-2.42", CH-7.40", CA-0. See pages 81-82 for manifold reference dimensions.
Carb height (CH) for this manifold is measured from the valley cover flange to the carb pad.

LS1/LS6 VALLEY PLATE

PERFORMER RPM (1500-6500 RPM)

PLEASE REFER TO PAGE 212 FOR MORE INFORMATION REGARDING THE EMISSIONS GUIDE.

46

INDEX

l 50-STATE LEGAL l RACING ONLY l PRE-POLLUTION CONTROLLED VEHICLES l STOCK REPLACEMENT l ENGINE SWAP

SPORTSWEAR

EMISSIONS GUIDE

FUEL PUMPS

Carburetor Recommendations: Edelbrock Thunder Series AVS #1803 and #1804, 500 cfm (see pages 13-15 for more information).
Installation Notes: #5408 Recommended intake gasket: Edelbrock #7242 or Fel-Pro MS9459B. Manifold height: A-4.03", B-5.21";
Carb pad height: 4.62" (see pages 81-82). Port exit dimensions: 2.06" x 1.15". #5409 Recommended intake gasket: Edelbrock #7240
or Fel-Pro MS9788B. Manifold height: A-4.03", B-5.21"; Carb pad height: 4.62" (see pages 81-82). Port exit dimensions: 2.39" x 1.15".

NITROUS

Performer RPM
Dual-Quad #54084
with EnduraShine Finish

Performer RPM Dual-Quad intake manifolds are designed to fit 1958-1965 Chevrolet 348/409 W big-block
engines. Two versions are available, one for small-port cast iron factory heads and one for factory large port
or with our Performer RPM W-series heads #60809, #60815 or #60819. These manifolds deliver performance
with Edelbrock Performer Series or Thunder Series AVS dual-quad carburetors, and they accept our dual-quad
fuel lines, throttle linkage, and air cleaners. Includes Oil Fill Tube (not installed) and matching push-in Breather.
Oil Fill Tube and Breather are also available separately as #4803. Carb center-to-center measurement is
6-7/16". Manifold and carb kits are on page 135. Available with satin or EnduraShine finish.
Satin
EnduraShine
Performer RPM Dual-Quad Small Port (non-EGR) l...............................................#5408 ...................#54084
Performer RPM Dual-Quad Large Port (non-EGR) l ...............................................#5409 ...................#54094

ACCESSORIES

Dyno graph for #7159

WATER PUMPS

PERFORMER RPM DUAL-QUAD (1500-6500 RPM)

CRATE ENGINES

Carburetor Recommendations: Edelbrock Thunder Series AVS or Performer Series carb, 600-800 cfm (see pages 13-15).
Installation Notes: #7158 Recommended intake gasket: Edelbrock #7242 or Fel-Pro MS9459B. Manifold height: A-4.35",
B-5.54"; Carb pad height: 4.62" (see pages 81-82). Port exit dimensions: 2.06" x 1.16". #7159 Recommended intake gasket:
Edelbrock #7240 or Fel-Pro MS9788B. Manifold height: A-4.35", B-5.54"; Carb pad height: 4.62" (see page 81-82). Port exit
dimensions: 2.39" x 1.16".

EFI

Performer RPM #7158

These Performer RPM intake manifolds are designed to fit 1958-1965 Chevrolet 348/409 W big-block
engines. Two versions are available, one for small-port cast iron factory heads and one for factory large
port or with our Performer RPM W-series heads #60809, #60815 or #60819. They both deliver improved
performance in the mid to high rpm range when combined with Edelbrock carburetors. Includes Oil Fill
Tube (not installed) and matching push-in breather cap. The Oil Fill Tube and Breather are also available
separately as #4803. For square-bore carburetors only.
Performer RPM Small Port (non-EGR) l .................................................................................................#7158
Performer RPM Large Port (non-EGR) l..................................................................................................#7159

SUPERCHARGERS

CHEVROLET 348/409 W-SERIES V8

POWER PACKAGES KITS

Valley plate #7788 for GM LS1/LS6 Engines

This as cast aluminum plate is intended for use on 1997-2004 GM LS1/LS6 engines and similar GM Gen III
engines that have been converted from EFI to carbureted set ups. The plate includes a breather boss that
will need to be drilled and tapped by those retaining the stock LS6 breather configuration or for LS1 users
looking to convert to a LS6 style. Will not work with LS2, LS7, LSX or any other GM GEN IV engines.
LS1/LS6 Valley Plate ....................................................................................................................................#7788

CAMSHAFT & VALVETRAIN

Victor Jr. LS3 #28457

MANIFOLDS GASKETS CYLINDER HEADS

VICTOR JR. L76/L92/LS3 (3500-7500 RPM)

CARBURETORS
CYLINDER HEADS GASKETS MANIFOLDS

MANIFOLDS

CHEVROLET 396-502 V8

PERFORMER 2-O (IDLE-5500 RPM)

Designed for street 396-502 c.i.d. big-block Chevy V8's using general duty oval-port cylinder heads. Will
not fit under hood of Corvette without hood modifications. Will not fit tall block V8's. May be used with
OEM or aftermarket carbs. Will fit 1965-90 oval port heads.
Satin Polished Black EnduraShine
Performer 2-O (non-EGR) ll .............................................................. #2161..... #21611..... #21613........#21614
Performer 2-O (EGR) ll ...................................................................... #3761..... ...N/A ....... ...N/A.............N/A
Carburetor Recommendations: #2161: Stock 4-bbl - use choke rod #9179 if needed. Edelbrock Thunder Series AVS or
Performer Series carb, 600-800 cfm (see pages 13-15), use bracket #8031 for 1972-78. #3761: Stock 4-bbl - use choke rod
#9179 if needed. Installation Notes: Use #8028 waterneck adapter for 1986 and later. Choke plate #8961 included.
Recommended intake gasket: Edelbrock #7203. Manifold height: A-4.300", B-5.400"; Carb pad height: 4.85" (see pages 81-82).
Port exit dimensions: 1.70"w x 1.68". Camshaft Recommendations: Performer Plus #2162. See page 121 for specs.

PERFORMER 454 T.B.I. (IDLE-5500 RPM)

Performer 454 T.B.I. Manifold #3764

Designed for street 454 c.i.d. Chevy V8's. Add our Performer High-Compression heads #60499 for even
greater power gains. Features EGR in stock location. Will not fit 1991-95 vehicles.
Performer 454 T.B.I. Mark IV (1987-90, EGR) l .......................................................................................#3764
Injector Recommendations: Use stock Throttle Body Injection Unit. Installation Notes: Recommended intake gasket: GM
#10181398. Manifold height: A-4.30", B-6.45" same as stock; Carb pad height: 5.37" (see pages 81-82). Port exit dimensions:
1.41"w x 1.59"t. 1987-90 Chevy 454 trucks require Edelbrock GM T.B.I. throttle bracket #8019.

PERFORMER RPM 2-O (1500-6500 RPM)

Performer RPM 2-O #7161

EFI

SUPERCHARGERS

KITS POWER PACKAGES

CAMSHAFT & VALVETRAIN

Polished
Performer 2-O #21611

Designed for street 396-502 c.i.d. Chevy V8's with large oval-port cylinder heads (1975 and earlier),
this dual-plane high rise manifold delivers outstanding horsepower while maintaining good torque and
driveability. No provisions for exhaust heated chokes. Accepts late-model waterneck, air-conditioning,
alternator and HEI equipment. Available with satin or EnduraShine finish, see page 29.
Satin
EnduraShine
Performer RPM 2-O (non-EGR) ll ............................................................................#7161 ...................#71614

CRATE ENGINES

Carburetor Recommendations: Edelbrock Thunder Series AVS or Performer Series carb, 650-800 cfm (see pages 13-15),
use bracket #8031 for 1972-78. Installation Notes: Recommended intake gasket: Edelbrock #7203. Manifold height:
A-4.45", B-6.0"; Carb pad height: 5.22" (see pages 81-82). Port exit dimensions: 1.60"w x 1.94"t. Will not fit under stock
hood of Corvette, 1964-67 Chevelle, or 1967-81 Camaro.

WATER PUMPS

Performer RPM 2-O #71614

PERFORMER RPM 2-R (1500-6500 RPM)

ACCESSORIES

Designed for street 396-502 c.i.d. Chevrolet V8's with high-performance rectangular-port cylinder heads,
this dual-plane high-rise manifold offers maximum horsepower with a broad torque curve. No provisions
for exhaust heated chokes. Accepts late-model waterneck, air-conditioning, alternator and HEI equipment.
Performer RPM 2-R (non-EGR) ll...........................................................................................................#7163

NITROUS
FUEL PUMPS
SPORTSWEAR
INDEX

B/B CHEVY

Performer RPM 2-R #7163

Carburetor Recommendations: Edelbrock Thunder Series AVS or Performer Series carb, 650-800 cfm (see pages 13-15),
use bracket #8031 for 1972-78.
Installation Notes: Recommended intake gasket:
Edelbrock #7202. Manifold height: A-4.45", B-6.0" (.25" taller
than stock high-rise aluminum manifold); Carb pad height:
5.22" (see pages 81-82). Port exit dimensions: 1.56"w x
2.24"t. Will not fit under stock hood of Corvette, 1964-67
Chevelle or 1967-81 Camaro.

Edelbrock manifolds
are manufactured
in the USA for
unsurpassed quality.

47

WWW.EDELBROCK.COM

CARBURETORS

B/B CHEVY

MANIFOLDS

Performer RPM 2-O Q-Jet #7164

Designed for spread-bore carbs but also works with Edelbrock square-bore carbs without adapter
on street 396-502 c.i.d. Chevy V8's with large oval-port (1975 and earlier) heads. #2561 is for marine
applications and features brass lined water passage and brass flange inserts to cover rear water
openings. No provisions for hot air style chokes. Accepts divorced choke, late-model waterneck, airconditioning, alternator and HEI equipment.
Performer RPM 2-O Q-Jet (oval-port, non-EGR) ll .............................................................................#7164
Performer RPM 2-O Q-Jet Marine Manifold (oval-port, non-EGR) ll .............................................#2561

RPM AIR-GAP 2-O (1500-6500 RPM)

Carburetor Recommendations: Edelbrock Thunder Series AVS or Performer Series carb, 650-800 cfm (see pages 13-15),
use bracket #8031 for 1972-78. Installation Notes: Recommended intake gasket: Edelbrock #7203. Manifold height:
A-4.45", B-6.0"; Carb pad height: 5.22" (see pages 81-82). Port exit dimensions: 1.60" x 1.94".

SUPERCHARGERS

RPM AIR-GAP 2-R (1500-6500 RPM)

EFI

RPM Air-Gap 2-O #75614

ACCESSORIES

TORKER II 2-O (2500-6500 RPM)

PLEASE REFER TO PAGE 212 FOR MORE INFORMATION REGARDING THE EMISSIONS GUIDE.

48

INDEX

l 50-STATE LEGAL l RACING ONLY l PRE-POLLUTION CONTROLLED VEHICLES l STOCK REPLACEMENT l ENGINE SWAP

SPORTSWEAR

EMISSIONS GUIDE

FUEL PUMPS

Carburetor Recommendations: Edelbrock Thunder Series AVS or Performer Series carb, 650-800 cfm (see pages 13-15),
use bracket #8031 for 1972-78. Installation Notes: Recommended intake gasket: Fel-Pro #1212 or Edelbrock #7203
(contact the tech department for more info). Manifold height: A-3.050", B-4.600" (.25" taller than stock Corvette); Carb
pad height: 3.82" (see pages 81-82). Port exit dimensions: 1.35" x 1.90"/1.60" x 1.90".
Camshaft Recommendations: Torker Plus #5062. See page 122 for specs.

NITROUS

Designed for street 396-502 c.i.d. Chevy V8's with large oval-port cylinder heads (1975 and earlier).
Manifold not equipped with EGR. Will not fit tall block V8 engines. Will fit under stock hood of Corvette
without modification.
Torker II 2-O (non-EGR) ll.......................................................................................................................#5061
Torker II 2-O polished finish (non-EGR) ll..........................................................................................#50611

Torker II 2-O #5061

WATER PUMPS

Carburetor Recommendations: Edelbrock Thunder Series AVS or Performer Series carb, 750-800 cfm (see pages 13-15),
use bracket #8031 for 1972-78. Installation Notes: Recommended intake gasket: Edelbrock #7202. Manifold height: A-4.45",
B-6.0"; Carb pad height: 5.22" (see pages 81-82). Port exit dimensions: 1.56" x 2.24". Will not fit under stock hood of Corvette,
1964-67 Chevelle or 1967-81 Camaro.

CRATE ENGINES

Designed for street 396-502 c.i.d. Chevrolet V8's with high-performance rectangular-port heads, the
RPM Air-Gap incorporates our race-winning technology. The open air space separates the runners from
the hot engine oil, and as a result, the air/fuel mixture stays cooler for a denser charge and more power.
Includes rear water outlets, two distributor clamp locations and nitrous bosses. Accepts all late model
alternator and A/C brackets for the street. For square-bore carbs only. No provision for exhaust heated
chokes and no exhaust crossover. Available with satin, polished or EnduraShine finish, see page 29.
Satin
Polished
EnduraShine
RPM Air-Gap 2-R (non-EGR) ll .......................................................#7562 ................#75621 ..................#75624
RPM Air-Gap 2-R #7562

POWER PACKAGES KITS

RPM Air-Gap 2-O #75613

Designed for street 396-502 c.i.d. Chevy V8's with large oval-port cylinder heads (1975 and earlier)
or Edelbrock Performer/Performer RPM heads. The RPM Air-Gap incorporates the same race-winning
technology thats been used on our Victor Series competition intakes for decades. The Air-Gap design
features an open air space that separates the runners from the hot engine oil resulting in a cooler, denser
charge for more power. Includes rear water outlets, two distributor clamp locations and nitrous bosses.
Accepts all late model alternator and A/C brackets for the street. For square bore carburetors only.
Will not fit under stock hood of Corvette, 1964-67 Chevelle or 1967-81 Camaro. No provision for exhaust
heated chokes and no exhaust crossover. Available with satin, polished, black powder coated or
EnduraShine finish, see page 29.
Satin Polished Black EnduraShine
RPM Air-Gap 2-O (non-EGR) ll ........................................................ #7561..... #75611..... #75613........#75614

CAMSHAFT & VALVETRAIN

Carburetor Recommendations: Edelbrock Thunder Series AVS or Performer Series carb, 650-800 cfm
(see pages 13-15), use bracket #8031 for 1972-78. Installation Notes: Recommended intake gasket: Edelbrock #7203.
Manifold height: A-4.45", B-6.0"; Carb pad height: 5.22" (see pages 81-82). Port exit dimensions: 1.61"x 1.93".
For divorced choke use #9178. Will not fit under stock hood of Corvette, 1964-67 Chevelle or 1967-81 Camaro.
Camshaft Recommendations: Performer RPM Camshaft #7162. See 122 for specs.

MANIFOLDS GASKETS CYLINDER HEADS

PERFORMER RPM Q-JET (1500-6500 RPM)

CARBURETORS
CYLINDER HEADS GASKETS MANIFOLDS

MANIFOLDS

C-66-O/C-66-R DUAL-QUAD (1500-6000 RPM)

Designed for 396-502 c.i.d. Chevys, tests confirmed smooth, consistent part-throttle operation with a
25 hp gain over Torker II and a torque gain of 30 ft-lbs. over Performer. Includes metering rods to calibrate
Edelbrock carbs. #1405 Carb center to carb center is 6-7/16". Use with Performer-Plus cam/kit #2162 for
low-end torque or Torker-Plus cam/kit #5062 for top-end power. Will not fit tall-deck truck blocks.
C-66-0 for 1975 & Earlier Large, Oval-Port Heads (non-EGR) ll ......................................................#5420
Polished C-66-0 for 1975 & Earlier Large, Oval-Port Heads (non-EGR) ll ....................................#54201
C-66-R for Rectangular-Port Heads (non-EGR) ll...............................................................................#5421

RPM Air-Gap Dual-Quad #75204 with EnduraShine Finish

Designed for street 396-502 c.i.d. Chevy V8's. These intakes stand 7/8" taller than the low-profile
C-66-O/R dual-quad intake and offer performance improvements in the 1500-6500 rpm range.
The large runners feature our unique Air-Gap design that separates the runners from the hot
engine valley for a cooler, denser charge. In dyno tests on a ZZ 502 with intake #7522, heads
#77485 and #2261 Rollin Thunder hydraulic roller camshaft, we made 602 hp, 15 hp more than
the Performer RPM manifold #7163. Both intakes are also available as a complete manifold and
carb kit, see page 135 for more information.
RPM Air-Gap Dual-Quad for 1975 & Earlier Oval Port (non-EGR) ll ..............................................#7520
RPM Air-Gap Dual-Quad for 1975 & Earlier Oval Port with EnduraShine Finish (non-EGR) ll #75204
RPM Air-Gap Dual-Quad Rectangular Port (non-EGR) ll .................................................................#7522
RPM Air-Gap Dual-Quad Rectangular Port with EnduraShine Finish (non-EGR) ll ..................#75224

Carburetor Recommendations: Edelbrock Thunder Series AVS #1803 and #1804, 500 cfm (see pages 13-15).
Installation Notes: Neither H.E.I. or mechanical tach drive distributors will fit. #7520: Recommended intake gasket:
Edelbrock #7203. Manifold height: A-4.81", B-5.56"; Carb pad height: 5.19" (see pages 81-82). Port exit dimensions:
1.60" x 1.93". #7522: Recommended intake gasket: Edelbrock #7202. Manifold height: A-5.18", B-5.94"; Carb pad height:
5.56" (see pages 81-82). Port exit dimensions: 1.57" x 2.27".

EFI

STREET TUNNEL RAM 2-O (3500-7500 RPM)

Street Tunnel Ram 2-O #7115

WATER PUMPS

CRATE ENGINES

Carburetor Recommendations: Edelbrock Thunder Series AVS #1803 and #1804, 500 cfm or #1405 600 cfm (see pages 13-15).
Installation Notes: H.E.I. will fit. Recommended intake gasket: Edelbrock #7203 (for #5420) or #7202 (for #5421). Manifold height:
A-3.95", B-4.65"; Carb pad height: 4.30" (see pages 81-82). Port exit dimensions: #5420 - 1.64" x 1.94"; #5421 - 1.66" x 2.30".

RPM AIR-GAP DUAL-QUAD-O/R (1500-6500 RPM)

SUPERCHARGERS

KITS POWER PACKAGES

CAMSHAFT & VALVETRAIN

C-66-O #5420

Designed for use on 396-502 c.i.d. big-block Chevy V8's with large oval-port heads (1975 and earlier).
Ideal for applications such as pro-street or marine where low-end torque is not a prime factor. Use with
Performer RPM cam/kit #7162 for maximum top-end power.
Street Tunnel Ram 2-O (base and top) ll .............................................................................................#7115
Throttle Linkage (forward) ll .................................................................................................................#7097
Top Gasket (included with base and top)..................................................................................................#6989
Performer RPM Camshaft/Lifters/Lube Kit (high-horsepower).............................................................#7162

ACCESSORIES

Carburetor Recommendations: Performer #1405, 600 cfm, Thunder Series AVS #1805, 650 cfm (see pages 13-15).
Installation Notes: Top has vacuum outlet for power brakes. Manifold will accept forward mounted carbs.
Distance from carb center to carb center: 9.38". H.E.I. ignition will not clear manifold. Recommended intake gasket:
Edelbrock #7203. Manifold top with bottom height: 10.63". (see pages 82-83) Port exit dimensions: 1.56" x 1.89".

Pro-Flo XT EFI #7136

PRO-FLO XT EFI (1500-6500 RPM)

FUEL PUMPS

NITROUS

This Pro-Flo XT intake is engineered for high performance 396-502 c.i.d. Chevy V8's with rectangular-port
cylinder heads. A large plenum and tapered runners deliver maximum horsepower and broad torque
throughout the rpm range (1500-6500 rpm). This manifold made 25 more horsepower than our #35500
Pro-Flo 2 single plane manifold. It features a 90mm throttle body opening for maximum performance.
Choice of satin aluminum or black powder coated finish.
Satin
Black
Pro-Flo XT EFI manifold (rectangular-port, non-EGR) lll ..................................#7136 ...................#71363
Fuel Rail Kit for B/B Chevy Rectangular-Port (compatible with Standard or Pico injectors) ..........#3658
Throttle Body Recommendations: Edelbrock #3869, #38693. Installation Notes: Recommended gasket: Edelbrock #7202.
Manifold height: A-9.80", B-10.00", C-17.80", D=0.00", E-10. See pages 81-82 for reference dimensions.

SPORTSWEAR
INDEX

B/B CHEVY

49

WWW.EDELBROCK.COM

CARBURETORS

B/B CHEVY STREET & RACE

MANIFOLDS

Victor Jr. 454-R with Radius Filled Runners #29020

VICTOR 454-R & VICTOR 454-TD (3500-8000 RPM)

VICTOR 454-O (3000-7500 RPM)

EMISSIONS GUIDE

PLEASE REFER TO PAGE 212 FOR MORE INFORMATION REGARDING THE EMISSIONS GUIDE.

50

INDEX

l 50-STATE LEGAL l RACING ONLY l PRE-POLLUTION CONTROLLED VEHICLES l STOCK REPLACEMENT l ENGINE SWAP

SPORTSWEAR

Carburetor Recommendations: Use 4500 Series or std-flange racing carbs with Edelbrock adapter #8716.
Installation Notes: Manifold height: A-5.90", B-5.90", see pages 81-82 for manifold reference dimensions.

FUEL PUMPS

Victor 454 Large Oval Port Intake #28070

NITROUS

DESIGNED TO MATCH EDELBROCK VICTOR CNC HEADS

This manifold for big-block Chevy is a variation of our Victor 454-R manifold #2907 with a 3/4" radius in the
ports, producing a port exit compatible with current large oval port heads such as the Edelbrock Victor 24
CNC head #61409. It delivers the performance of the original #2907, giving excellent on-track performance
on 502 c.i.d. and smaller engines. It can be ported to fit a wider variety of cylinder head shapes and
locations, making it especially suitable for use with custom CNC ported heads.
Victor 454-LO (with 3/4" radius filled-corner runners) l .......................................................................#28070

ACCESSORIES

VICTOR 454 LARGE OVAL PORT (3500-8000 RPM)

WATER PUMPS

Victor 454-R #2907

CRATE ENGINES

REHER-MORRISON COUNTS ON EDELBROCK!

Reher-Morrison Racing Engines relies on Edelbrock manifolds for maximum performance in their popular
Super Series big-block Chevys. Their 805 hp Super Series 502 and 845 hp
Super Series 522 come with Victor 454-R #2907, while the monstrous 910 hp
Super Series 555 is topped with an Edelbrock Super Victor BBC #2927.

EFI

Carburetor Recommendations: Use 4500 Series or std-flange racing carbs with Edelbrock adapter #8716.
Installation Notes: Recommended intake gasket: Edelbrock #7208 (for #2907 & #2911) or Edelbrock #7203 (for #2909).
Manifold height: Victor 454-R and Victor 454-O A-5.90", B-5.90"; Victor 454-TD A-6.23", B-6.23", see pages 81-82 for
manifold reference dimensions.

SUPERCHARGERS

Victor Jr. 454-O EFI #29045

The Victor 454 Series (R, O and TD) for big-blocks offer superior performance for drag racing and marine.
Victor 454-R is for rectangular-port heads and 454-TD fits the same heads when a tall-deck block is used.
Victor 454-0 is for engines with large oval-port heads (1975 & earlier). They accept 4500 Series carbs or
standard-flange double-pumpers with our adapter #8716. For maximum hp with 4500 Series carbs, use
1" spacer #8717. Victor 454-TD uses standard deck height distributor. #2907 and #2911 will fit Edelbrock
Victor race heads #77609, #77409 and #77459.
Victor 454-R l ..............................................................................................................................................#2907
Victor 454-O l ..............................................................................................................................................#2909
Victor 454-Tall Deck l ...............................................................................................................................#2911

POWER PACKAGES KITS

Carburetor Recommendations: Use appropriate racing carburetor. Throttle Body Recommendations: Use #3878 4V series or
#3849 EFI elbow and #3869 90mm throttle body. Installation Notes: Recommended intake gasket: Edelbrock #7208 (for #2902)
or Edelbrock #7203 (for #2904). Manifold height: A-5.90" & B-5.90" , see pages 81-82 for manifold reference dimensions.

CAMSHAFT & VALVETRAIN

Victor Jr. 454-R EFI #29025

Designed for competition 396-502 big-block Chevys. #2902 fits rectangular-port heads and #72902
features out-of-the-box pre-assembled direct port nitrous system ready to bolt on and go, see page 194.
These intakes are designed to optimize the flow characteristics of an 850 cfm standard flange carb.
Features include extended runner dividers, smaller plenum chambers and unique runner design for better
60 foot times and max power from 3500 to 7500 rpm. These manifolds are especially suited to 502 c.i.d.
and smaller competition engines. Manifold #2904 fits large oval-port heads (1975 & earlier). #29020 is a
single plane 4150 flange competition manifold designed to fit standard deck blocks from 1965 to present.
This manifold is cast with 3/8" more material in the corners of the ports for a final radius of 3/4". This extra
material allows for custom port matching for use with various cylinder head applications. It is designed
to be matched with our Edelbrock/Musi Victor 24 Pro-Port CNC heads #61419 or #61409 for 950+ hp
out-of-the-box potential! Victor Jr. 454-R #2902 will fit Edelbrock Victor race heads #77609 and Victor 24
#77409, #77459, #77429, #77479 and #77489.
Victor Jr. 454-R l.........................................................................................................................................#2902
Victor Jr. 454-R Pre-Assembled Direct Port Nitrous System l.........................................................#72902
Victor Jr. 454-R (with 3/4" radius filled-corner runners) l....................................................................#29020
Victor Jr. 454-R EFI l .................................................................................................................................#29025
Victor Jr. 454-O l ........................................................................................................................................#2904
Victor Jr. 454-O EFI l.................................................................................................................................#29045
Victor Jr. 454-R & 454-O EFI Fuel Rail Kit (standard injectors with stands) .......................................#3633

MANIFOLDS GASKETS CYLINDER HEADS

VICTOR JR. 454-R AND VICTOR JR. 454-O (3500-7500 RPM)

CARBURETORS
CYLINDER HEADS GASKETS MANIFOLDS

MANIFOLDS

B/B CHEVY RACE

VICTOR RAM 2-R (4500-8500 RPM)

Designed for 396-502 c.i.d. Chevy V8's using rectangular-port heads. Suitable for boat and drag racing.
Operates from 4000-7000 rpm with the standard-flange top and above 7000 rpm with the dual 4500 top.
The same base works with all tops. Will fit Edelbrock Victor series race heads #77409, #77459 and #77609.
Victor Ram 2-R (base only) l .....................................................................................................................#7075
Installation Notes: Recommended intake gasket: Edelbrock #7208, Fel-Pro #1275, see pages 81-82.
Manifold Height: 9.280" Port exit dimensions: 1.70" x 2.34"

CAMSHAFT & VALVETRAIN

Victor Ram 2-R #7075

TOPS FOR VICTOR RAM 2-R #7075

Two, In-Line, Standard-Flange Carbs (top only, includes gasket #6989) l........................................#7078
Throttle Linkage............................................................................................................................................#7097
Sideways Mounting Carb Adapters (pair, see page 25 for more info) ................................................#2694
Carburetor Recommendations: Use appropriate racing carburetor.
Installation Notes: Distance from carb center to carb center: 9.38". Manifold top with bottom height: 10.40". #2694
requires #7077 throttle linkage. GM H.E.I. ignition will not clear manifold.

Two, Sideways Mounted, 4500 Carbs (top only, includes gasket #6989) ............................................#7079
Throttle Linkage............................................................................................................................................#7077

KITS POWER PACKAGES

In-line Standard Flange Top #7078

Carburetor Recommendations: Use appropriate 4500 Series racing carburetor.Installation Notes: Distance from carb
center to carb center: 9.40". Manifold top with bottom height: 10.40", see pages 81-82 for manifold reference dimensions.

SUPERCHARGERS

VICTOR TUNNEL RAM (4500-8500 RPM)

WATER PUMPS

CRATE ENGINES

EFI

Victor Tunnel Ram

Carbureted Base #7085

This Victor Tunnel Ram is a modern updated design to our very successful Victor Ram 2-R Tunnel Ram,
which was first released over 35 years ago. It's designed for use with 468-582 c.i.d. standard-deck
Chevrolet V8 engines with conventional rectangular port cylinder heads. This new and improved design
has 7 long runners with close to 5.5 square-inches at the plenum, making it 25% larger than our current
Victor Ram 2-R Tunnel Ram base! This is the ideal intake manifold for any modern high horsepower
demanding application. Will fit Edelbrock Victor series race cylinder heads #77409, #77459 and #77609.
Available for carbureted and fuel injected applications.
The Victor Tunnel Ram top is for use with 4500 series carburetors and our new Victor Tunnel Ram base
manifolds only. It's designed with larger openings to accommodate throttle bore sizes up to 2.31" without
modification and is wider to accommodate the larger runners in the new manifolds. Carburetors will
need to be mounted sideways in order to clear and will work with throttle linkage kit #7077.
Fuel rail kit ends are machined for -8 AN fittings and feature a black anodized finish. Fuel rails do not have
any provision for a plug-in style fuel pressure regulator. Crossover and regulator not included.
Victor Tunnel Ram Base Only for Carbureted Applications l ............................................................ #7085
Victor Tunnel Ram Base Only for EFI Applications l ........................................................................... #70855
Victor Tunnel Ram Top Only for 4500 Series Carb or throttle body (includes gasket and hardware) l ........ #7086
Victor Tunnel Ram Fuel Rail Kit (standard injectors) .............................................................................. #3659
Throttle Linkage (sideways)......................................................................................................................... #7077
Victor Tunnel Ram Base to Top Replacement Gasket (for #7085, #7086, #70855)..................................... #7355

ACCESSORIES

Carburetor Recommendations: Use appropriate 4500 Series racing carburetor. Installation Notes: Recommended intake
gasket: Edelbrock #7208 or Fel-Pro #1275. Distance from carb center to carb center: 9.40". Manifold height: 10.75". Port exit
dimensions: 1.78" x 2.50". Generously sized port exits; R=1.44; F=1.06; W=1.78; H=2.50

INDEX

SPORTSWEAR

FUEL PUMPS

NITROUS

EFI Tunnel Ram #70855

Victor Tunnel Ram Top Only #7086

Replacement gasket #7355

Fuel Rail Kit #3659

51

WWW.EDELBROCK.COM

CARBURETORS

B/B CHEVY RACE MANIFOLDS

Super Victor BBC #2927

Designed for Chevy big-blocks with rectangular port cylinder heads, this single-plane manifold is ideal for
500+ cubic-inches or any big-block drag race engine with high air flow requirements. In dyno testing,
Super Victor #2927 outperformed the competition out-of-the-box with just a port match and minor blending of
critical surfaces. Super Victor Tall-Deck #2916 can be used on tall-deck (10.2") blocks without manifold spacers
and accepts standard height distributors.
Super Victor BBC (9.8") l ...........................................................................................................................#2927
Super Victor BBC EFI (9.8") l ....................................................................................................................#29275
Super Victor BBC Tall-Deck (10.2") l ......................................................................................................#2916
Super Victor BBC EFI Tall-Deck (10.2") l ...............................................................................................#29165
Super Victor BBC EFI Fuel Rail Kit (standard injectors with stands)...................................................#3633

SUPER VICTOR II (3500-8500 RPM)

Super Victor BBC Manifold #2916

52

INDEX

PLEASE REFER TO PAGE 212 FOR MORE INFORMATION REGARDING THE EMISSIONS GUIDE.

SPORTSWEAR

l 50-STATE LEGAL l RACING ONLY l PRE-POLLUTION CONTROLLED VEHICLES l STOCK REPLACEMENT l ENGINE SWAP

FUEL PUMPS

EMISSIONS GUIDE

NITROUS

Edelbrock manifolds
are manufactured
in the USA for
unsurpassed quality.

ACCESSORIES

Carburetor Recommendations: Use appropriate 4500 Series racing carburetor. Installation Notes: Recommended intake
gasket: Edelbrock #7208, Fel-Pro #1275. Manifold height: A-6.20", B-6.20", see pages 81-82 for manifold reference dimensions.

WATER PUMPS

Super Victor Oval Port #29270

CRATE ENGINES

DESIGNED TO MATCH EDELBROCK VICTOR CNC HEADS

This manifold for big-block Chevy is a variation of our Super Victor BBC manifold #2927 with a 3/4" radius
in the ports, producing a port exit compatible with current large oval port heads such as the Edelbrock
Victor 24 CNC head #61409. It shares the performance attributes of the original #2927, but can be ported
to fit a wider variety of cylinder head shapes and locations, making it especially suitable for use with
custom CNC ported heads on engines with high air flow requirements.
Super Victor Oval Port (with 3/4" radius filled-corner runners) l ........................................................#29270

EFI

SUPER VICTOR BBC LARGE OVAL PORT (3500-8500 RPM)

SUPERCHARGERS

Super Victor II Intake Manifold #28962 ports

Installation Notes: Recommended intake gasket: #2896, #2897 use Fel-Pro #1275. #2899 use Brodix MG 2177. #2895
Manifold height: A-7.62", B-7.62", #2896 Manifold height: A-7.56", B-7.56", #2897 Manifold height: A-7.50", B-7.50", #2898
Manifold height: A-7.68", B-7.68", see pages 81-82 for manifold reference dimensions.

POWER PACKAGES KITS

Super Victor II #2896

FOR STANDARD-DECK (9.8") & TALL DECK (10.2") B/B CHEVY RECTANGULAR PORT
Designed for use with large cubic inch big-block Chevy engines using the latest design conventional port
heads. These single-plane intake manifolds are ideal for any 1,000+ horsepower drag race engine with
high air flow requirements. Manifold #2895 features thicker flanges resulting with .080" increase in port
exit height. Manifold #2896 features an improved runner design with an incredible 5.0 square-inches of
runner area in the plenum. #28962 is CNC port matched for Edelbrock/Musi Victor 24 CNC 377cc cylinder
heads #61409. Manifold #2897 features 5.38 square-inches of runner area at the plenum. Designed for use
on tall-deck (10.2") blocks without manifold spacers and accepts standard height distributors. #28972 is
CNC port matched for use with cylinder head #61409 and features 5.38 square inches of runner area at
the plenum. #2898 is based on #2897 with special machining, increasing port exits by .250" for raised
port heads. #28978 is machined for use on tall-deck (10.2") blocks with Brodix SR20 cylinder heads with
no modifications out of the box. Accepts standard height distributors. Slip collar distributor recommended
for this manifold when used on short deck blocks. All manifolds have an extra large carburetor outer
flange with a 5" x 5" opening to fit high flow carburetors and throttle stops. Modern casting techniques
create smooth, thin, extended divider walls for "out of the box" performance, just port match and go!
Super Victor II Big-Block Chevy Standard-Deck (9.8" with .080" raised ports) l.............................#2895
Super Victor II Big-Block Chevy Standard-Deck (9.8") l ....................................................................#2896
Super Victor II Big-Block Chevy Standard-Deck CNC (9.8") l ...........................................................#28962
Super Victor II Big-Block Chevy Standard-Deck (9.8" with .250" raised ports) l.............................#2898
Super Victor II Big-Block Chevy Tall-Deck (10.2") l ............................................................................#2897
Super Victor II Big-Block Chevy Tall-Deck CNC (10.2") l...................................................................#28972
Super Victor II Big-Block Chevy Tall-Deck (10.2")
for use with Brodix SR20 Heads (includes end seal spacers) l........................................................#28978

CAMSHAFT & VALVETRAIN

Carburetor Recommendations: Use appropriate 4500 Series racing carburetor. Throttle Body Recommendations: Use
#3879 4500 style or #3814 EFI elbow and #3869 90mm throttle body. Installation Notes: Recommended intake gasket:
Edelbrock #7208, Fel-Pro #1275. Standard-deck manifold height: A-6.20", B-6.20", Tall-deck Manifold height: A-6.95",
B-6.95" see pages 81-82 for manifold reference dimensions.

MANIFOLDS GASKETS CYLINDER HEADS

SUPER VICTOR BBC (3500-8500 RPM)

CARBURETORS
CYLINDER HEADS GASKETS MANIFOLDS

MANIFOLDS

BIG VICTOR SPREAD-PORT (3500-8500 RPM)

EFI

SUPERCHARGERS

KITS POWER PACKAGES

CAMSHAFT & VALVETRAIN

Big Victor
Spread-Port #2801

Big Victor 2
Big Victor

Description

9.8"
Deck Height

10.2"
Original
Taller
Thicker Emissions Carbureted
Deck Height Runner Design Runner Design Carb Pad
Code
Part No.

Big Victor Spread-Port

Big Victor 2 Spread-Port
Big Victor 2 Spread-Port

EFI
Part No.

l
l
l
l

#2801
#2802
#28001
#28002

#28015
#28025

l
l
l
l
l

#2805
#2806
#28001
#28002

#28055
#28065

#3624

FOR USE WITH BRODIX BIG DUKE HEADS ONLY

Big Victor Spread-Port
Big Victor 2 Spread-Port
Big Victor 2 Spread-Port
Big Victor EFI Fuel Rail Kit (Standard injectors)

WATER PUMPS

CRATE ENGINES

Blue represents the original Big Victor

Carburetor Recommendations: Use appropriate 4500 Series
runner and carb pad design
racing carburetor. Throttle Body Recommendations:
Red represents new Big
Use #3888 2.25" 4V or the #3814 or #3815 EFI elbow.
Victor 2 runner and
Installation Notes: Recommended intake gasket:
carb pad design
Fel-Pro #1298. Manifold ht.: #2801: A-8.15", B-8.15";
Manifold ht.: #2802: A-8.47", B-8.47", Manifold ht.: #2805:
A-7.99", B-7.99", Manifold ht.: #2806: A-8.25", B-8.25" ,
Internal
Side View
Manifold ht.: #28082: A-9.43", B-9.43", Manifold ht.:#28001:
A-9.21", B-9.21", Manifold ht.: #28002: A-9.53", B-9.53",
Manifold ht.: #28083: A-9.05", B-9.05", Manifold ht.: #28084: A-9.31", B-9.31", see pages 81-82 for manifold reference dimensions.

Big Victor Spread-Port

BIG VICTOR 2 CNC SPREAD-PORT (3500-8500 RPM)

NITROUS

ACCESSORIES

Edelbrock Big Victor 2 CNC intake manifolds are designed for large cubic-inch or high rpm drag racing
big-blocks. They are a spread-port design and have been CNC port matched for a proper fit right-out-ofthe-box, when used with the Edelbrock Big Victor, Brodix, Dart or Pro-Filer Raptor cylinder heads.
These manifolds have the same features as the standard as-cast Edelbrock Big Victor 2 Spread-Port
intakes. All applications are equipped with a 4500 Series flange and will accept 2.25 throttle body
butterflies without a spacer or modification. They are available for standard and tall-deck applications.
Big Victor 2 CNC (#28001) for Edelbrock Big Victor head #617569 (9.8" deck) l .............................#28003
Big Victor 2 CNC (#28001) for Dart 11 and Pro-Filer Raptor 12 heads (9.8" deck) l ....................#28004
Big Victor 2 CNC for Edelbrock Big Victor heads #618268 & #618368 (9.8" deck) l .......................#28007
Big Victor 2 CNC for Brodix 12 heads (9.8" deck) l ............................................................................#28008

FUEL PUMPS
SPORTSWEAR

Designed for large cubic-inch or high rpm drag racing big-blocks with Edelbrock Big Victor, Dart Big
Chief or Brodix Big Duke cylinder heads, these manifolds have an average runner area of approximately
4.75 sq. in. The port exits have .090" per side reduction to accommodate the wide variety of intake port
sizes and require port matching. The runners have a minimum corner radius of .500" from the plenum to
the exit allowing the popular oval port shape to be used. The outside runners are shorter and straighter
than competitors manifolds and the plenum is longer front to back. These features, combined with
approximately 5% taper in runner cross-sectional area, give better top end horsepower while maintaining
consistency and throttle response off the stop.
Big Victor 2 intake manifolds have an extended runner design, carb pad and plenum for increased air
flow and performance in large displacement race engines. These intake manifolds are designed to
perform right out-of-the-box with minimum modifications, but can still be ported as needed. Port matching
is required for best results.
All applications are equipped with a 4500 Series flange and will accept 2.25 throttle body butterflies
without a spacer or modification.

FOR USE WITH EDELBROCK BIG VICTOR, PROFILER RAPTOR AND DART BIG CHIEF HEADS ONLY

Big Victor Spread-Port

INDEX

B/B CHEVY RACE

Big Victor 2 CNC (#28002) for Edelbrock Big Victor head #617569 (10.2" deck) l ...........................#28005
Big Victor 2 CNC (#28002) for Dart 11 and Pro-Filer Raptor 12 heads (10.2" deck) l ..................#28006
Big Victor 2 CNC or Edelbrock Big Victor heads #618268 & #618368 (10.2" deck) l.......................#28009
Big Victor 2 CNC for Brodix 12 heads (10.2" deck) l ..........................................................................#28010
Big Victor Spread-Port #28005

53

Carburetor Recommendations: Use appropriate 4500 Series racing carburetor. Throttle Body Recommendations: Use #3888
2.25" 4V or the #3814 or #3815 EFI elbow. Installation Notes: Recommended intake gasket: Fel-Pro #1298. Manifold ht.:#28003/5:
A-9.21", B-9.21", Manifold ht.: #28004/6: A-9.53", B-9.53", visit www.edelbrock.com for manifold reference dimensions.

WWW.EDELBROCK.COM

CARBURETORS

B/B CHEVY RACE MANIFOLDS

BV3 Manifold
#285408

Plenum
Cross-Section
7.5 sq. in.
7.5 sq. in.
7.5 sq. in.
8 sq. in.
8 sq. in.
8 sq. in.
8 sq. in.

Emissions
Code
l
l
l
l
l
l
l

Intake
Manifold
#28540
#28542
#28549
#28570
#28572
#28574
#28579
#7255
#7256

CNC Port
Matched
#285408
#285428

#285708
#285728
#285748

#7255
#7256

Valley
Plate
#77730
#77732
#77739
#77740
#77742
#77744
#77749

EFI

Flange
Thickness
Standard
Standard
Thick
Standard
Standard
Standard
Thick

SUPERCHARGERS

Deck
Height
9.8"
10.2"

11.2"
11.625"
11.750"

Intake manifold #285408 features CNC port matching

POWER PACKAGES KITS

Bore
Spacing
4.84"
4.84"
4.84"
5.00"
5.00"
5.00"
5.00"
4.84"
5.00"

Description
BV3 Standard-Deck
BV3 Tall-Deck
BV3 Unported
BV3
BV3
BV3
BV3 Unported
Valley Plate Gasket
Valley Plate Gasket

Carburetor Recommendations: Use appropriate 4500

Series racing carburetor. Installation Notes: Recommended
intake gasket: Edelbrock #7249 (4.84" bore), Edelbrock #7250
(5.00" bore), Manifold ht.: W-1.65, H-2.41, R-1.27, F-1.14.

CAMSHAFT & VALVETRAIN

BV3 Valley Plate #77740

These manifolds are designed and have been CNC port matched for use with Edelbrock BV3 cylinder
heads which feature a unique symmetrical port layout for the 4.84" or 5.0" bore spacing big-block
Chevrolet applications. These manifolds feature a spider style single-plane design with efficient runners
that are engineered to deliver peak performance across a wide range of applications. They have a
lengthened plenum and a narrowed runner design to deliver equal length runners.
These manifolds are also the first in the Big Victor Series to feature Edelbrock's unique two-piece
design. This unique design simplifies and reduces time in applications that require CNC porting.
The manifolds are cast in two separate pieces, allowing them to be taken apart for better porting
access and then they can be bolted back together while maintaining a perfect match. Each piece has a
precision machined o-ring groove to ensure a proper seal. High quality bolts and washers are supplied.
Each manifold also has a matching valley plate with the proper flange thickness (sold separately).
These unique valley plates feature a highly efficient
integrated water distribution system, reducing the
need for external plumbing.
All of these manifolds feature a carb pad with
a 4500 Series flange that is also large enough to
accommodate various throttle body and throttle
stop applications on the market today.

MANIFOLDS GASKETS CYLINDER HEADS

BV3 CNC (3500-8500 RPM)

CRATE ENGINES
WATER PUMPS
ACCESSORIES

BV3 Manifold
#285708

Match BV3 intake manifolds with BV3 cylinder heads, see page 99 for more information

EMISSIONS GUIDE

PLEASE REFER TO PAGE 212 FOR MORE INFORMATION REGARDING THE EMISSIONS GUIDE.

54

INDEX

l 50-STATE LEGAL l RACING ONLY l PRE-POLLUTION CONTROLLED VEHICLES l STOCK REPLACEMENT l ENGINE SWAP

SPORTSWEAR

Big Victor HV Spread-Port #28045

Carburetor Recommendations: Use appropriate 4500 Series racing carburetor. Installation Notes: Recommended intake
gasket: Fel-Pro #1298. Manifold height.: #2803: A-8.15", B-8.15"; Manifold height.: #2804: A-8.47", B-8.47", (see page 81-82).

FUEL PUMPS

Big Victor HV manifolds are identical to our #2801 and #2802 intakes, but with a smaller plenum and smaller
velocity runners for optimal performance on engines with a displacement up to 590 cubic inches, or for
larger displacement engines whose power band is primarily below 6500 rpm. This combo makes this an
ideal choice for throttle stop applications or for custom ported versions to create unique port configurations.
Big Victor HV EFI for Edelbrock, Brodix & Dart Heads (9.8" deck height) l ....................................#28035
Big Victor HV EFI for Edelbrock, Brodix & Dart Heads (10.2" deck height) l ..................................#28045

NITROUS

BIG VICTOR HV SPREAD-PORT (3500-8500 RPM)

CARBURETORS

MANIFOLDS

CYLINDER HEADS GASKETS MANIFOLDS

Manifold #2176 is approved for

IMCA sanctioned racing events,
see rulebook for details

Designed for street 318-340-360 c.i.d. Chrysler V8's. These manifolds are not for use on marine engines
used in salt water. Will not fit 1992 and later Magnum engines.
Satin
Black
Performer 318/360 (non-EGR) l ...................................................................................#2176 ...................#21763
Performer 318/360 (EGR, 1972-86 only) l ...................................................................#3776 ......................N/A

CAMSHAFT & VALVETRAIN

Performer 318/360 #2176

Carburetor Recommendations: OEM 4-bbl Edelbrock Thunder Series AVS or Performer Series carb, 600-650 cfm
(see pages 13-15), use our #1481 or #1843 Throttle/Transmission Lever Kit. Installation Notes: Recommended intake
gasket: Edelbrock #7276, Chrysler #4494462AB for 318, #4397642 for 340 and 360 (or equivalent). Manifold height: A-4.13",
B-5.13"; Carb pad height: 4.63" (see pages 81-82). Port exit dimensions: .97" x 1.95". Camshaft Recommendations:
Performer Plus #2177. See page 121 for specs.

PERFORMER RPM 340/360 (1500-6500 RPM)

KITS POWER PACKAGES

Designed for 340-360 c.i.d. Chrysler V8's and 318 c.i.d. engines with 340-360 cylinder heads.
Latest technology in dual-plane design results in both excellent low-rpm torque and outstanding highrpm horsepower. Recommended for high-performance street, strip and fresh water marine applications.
Accepts 1975 and earlier waterneck only. Will not accept stock Thermo-Quad carburetor. Will not fit
1992 and later Magnum engines. Match with Performer RPM heads #60779 for maximum performance.
Performer RPM 340/360 (non-EGR) l .......................................................................................................#7176
Carburetor Recommendations: Edelbrock Thunder Series AVS or Performer Series carb, 650-800 cfm (see pages 13-15),
use our #1481 or #1843 Throttle/Transmission Lever Kit. Installation Notes: Recommended intake gasket: Edelbrock #7276,
Fel-Pro #1213, Chrysler #4397642 (or equivalent) for 340 & 360. Manifold height: A-4.9", B-5.8"; Carb pad height: 5.35"
(see pages 81-82). Port exit dimensions: 1.01" x 2.17". 1979 and later rotary A/C compressor will not clear waterneck.
Camshaft Recommendations: Performer RPM #7177. See page 122 for specs.

RPM AIR-GAP 340/360 (1500-6500 RPM)

THE FIRST DUAL-PLANE MANIFOLD DESIGN FOR HIGH-PERFORMANCE

STREET WITH OUR PROVEN, RACE-WINNING AIR-GAP FEATURE
Performer RPM 340/360 #7176

CRATE ENGINES

EFI

SUPERCHARGERS

CHRYSLER 318/360 V8

PERFORMER 318/360 (IDLE-5500 RPM)

WATER PUMPS

RPM Air-Gap #7576

Designed for 340-360 c.i.d. Chrysler V8's and 318 c.i.d. engines with 340-360 cylinder heads, the RPM Air-Gap
incorporates the same race-winning technology thats been used on our Victor Series competition intakes
for years. The Air-Gap design features an open air space that separates the runners from the hot engine
oil resulting in a cooler, denser charge for more power. Accepts 1975 and earlier waterneck only.
No provision for exhaust heated chokes and no exhaust crossover. Will not accept stock Thermo-Quad
carburetor. Will not fit 1992 and later Magnum engines. Includes nitrous bosses. Available with satin,
black powder coated or EnduraShine finish, see page 29.
Satin
Black
EnduraShine
RPM Air-Gap 340/360 (non-EGR) l ................................................ #7576 ....................#75763 ..................#75764
Carburetor Recommendations: Edelbrock Thunder Series AVS or Performer Series carb, 650-800 cfm (see pages 13-15),
use our #1481 or #1843 Throttle/Transmission Lever Kit. Installation Notes: Recommended intake gasket: Edelbrock #7276,
Fel-Pro #1213, Chrysler #4397642 (or equivalent) for 340 and 360. Manifold height: A-4.9", B-5.8"; Carb pad height: 5.35"
(see pages 81-82). Port exit dimensions: .98" x 2.16". 1979 and later rotary A/C compressor will not clear waterneck.

ACCESSORIES

TORKER II 340/360 (2500-6500 RPM)

Torker II 340/360 #5076

FUEL PUMPS

NITROUS

Manifold #2915 is approved for

IMCA sanctioned racing events,
see rulebook for details

Designed for high performance street 340-360 c.i.d. Chrysler V8's. Manifold not equipped with EGR.
Can be used on 318 c.i.d. if 340-360 c.i.d. cylinder heads are used. Not for heavy vehicles. Will not fit
1992 and later Magnum engines.
Torker II 340/360 (non-EGR) l....................................................................................................................#5076
Carburetor Recommendations for High-Performance or Competition: Edelbrock Thunder Series AVS or
Performer Series carb, 600-800 cfm (see pages 13-15), use our #1481 or #1843 Throttle/Transmission Lever Kit.
Installation Notes: Recommended intake gasket: Edelbrock #7276, Fel-Pro #1213, Chrysler #4397642 (or equivalent).
Manifold height: A-5.25", B-6.19"; Carb pad height: 5.72" (see pages 81-82). Port exit dimensions: 1.00" x 2.17".

VICTOR 340/360 (3500-8000 RPM)

Victor 340 is designed for 340-360 c.i.d. Chryslers using standard rectangular-port heads.
For oval track and drag race engines operating from 3500-8000 rpm. Can be used on 318 c.i.d. engines
with 340-360 heads. Will not fit 1992 and later Magnum engines. Accepts 1975 and earlier waterneck only.
Victor 340/360 (non-EGR) l ........................................................................................................................#2915

SPORTSWEAR
INDEX

S/B CHRYSLER

Victor 340/360 #2915

55

Carburetor Recommendations: Use appropriate racing carburetor.Installation Notes: Recommended intake gasket:
Edelbrock #7276, Fel-Pro #1213. Manifold height.: A-4.15", B-5.70", (see page 81-82).

WWW.EDELBROCK.COM

CARBURETORS

S/B CHRYSLER RACE, MAGNUM & HEMI MANIFOLDS

Designed for 340-360 c.i.d. Chrysler V8 engines using the Chrysler W-2 oval-port cylinder heads (Chrysler
#P4120664). For oval track and drag race engines operating in the 3500 to 8000 rpm range. Can be used on
318 c.i.d. engines if W-2 oval-port cylinder heads are used. Accepts 1975 and earlier waterneck only.
Victor W-2 (non-EGR) l ..............................................................................................................................#2920
Carburetor Recommendations: Use appropriate racing carburetor. Installation Notes: Recommended intake gasket:
Mopar Performance #P4007571. Manifold height: A-4.15", B-5.70", (see page 81-82).
Victor W-2 #2920

SUPER VICTOR S/B CHRYSLER (3500-8000 RPM)

Super Victor Chrysler #2815

CHRYSLER MAGNUM V8

RPM AIR-GAP MAGNUM (1500-6500 RPM)

CHRYSLER 5.7L HEMI V8

RPM AIR-GAP DUAL-QUAD (1500-6500 RPM)

Carburetor Recommendations: Edelbrock Thunder Series AVS or Performer Series carb, 500 cfm (see pages 13-15).
Installation Notes: Port flanges have machined grooves to accept stock port seals. Carb pad height: 4.72", C.A. 2
(see pages 81-82). Port exit dimensions: 1.78" x 1.60". Comes with threaded oil fill cap and PCV valve.

ACCESSORIES

CHRYSLER 361-400 V8

NITROUS

Designed for street 361-383-400 c.i.d. Chrysler V8's that measure 7.75" across block.
May be used with OEM or aftermarket carbs.
Performer 383 (EGR/non-EGR) l................................................................................................................#2186

EMISSIONS GUIDE

PLEASE REFER TO PAGE 212 FOR MORE INFORMATION REGARDING THE EMISSIONS GUIDE.

56

INDEX

l 50-STATE LEGAL l RACING ONLY l PRE-POLLUTION CONTROLLED VEHICLES l STOCK REPLACEMENT l ENGINE SWAP

SPORTSWEAR

Carburetor Recommendations: OEM 4-bbl. Edelbrock Thunder Series AVS or Performer Series carb, 600-800 cfm
(see pages 13-15), use our #1481 or #1843 Throttle/Transmission Lever Kit. Installation Notes: Recommended intake
gasket: Edelbrock #7225. Manifold height: A-3.65", B-4.35", measured to engine block; Carb pad height: 4.00"
(see pages 81-82). Port exit dimensions: 1.14" x 2.12". Camshaft Recommendations: Performer Plus #2192.
See page 121 for specs.

FUEL PUMPS

PERFORMER 383 (IDLE-5500 RPM)

Performer 383 #2186

WATER PUMPS

RPM Air-Gap Dual-Quad HEMI #7528

Designed for the new Chrysler 5.7L HEMI, this manifold is perfect for those looking to swap this modern
powerplant into their classic Chrysler or street rod. Our RPM Air-Gap Dual-Quad manifold added over 30
ft-lbs. of torque when tested on the Chrysler crate engine P4510594. The dual-quads make great power while
providing a nostalgic look. Requires an MSD Performance 6-Hemi Controller #6013 for ignition timing
control. See kits on page 133-135.
RPM Air-Gap Dual-Quad Manifold for 2003-08 5.7L HEMI l ..............................................................#7528
RPM Air-Gap Dual-Quad Manifold for 2003-08 5.7L HEMI with EnduraShine Finish l ................#75284

CRATE ENGINES

Carburetor Recommendations: Edelbrock Thunder Series AVS or Performer Series carb, 650-800 cfm (see pages 13-15),
use our #1481 or #1843 Throttle/Transmission Lever Kit. Installation Notes: Recommended intake gasket: Edelbrock #7277,
Mopar Performance #4876049 (or equivalent). Manifold height: A-4.75", B-5.8"; Carb pad height: 5.27" (see pages 81-82).
Port exit dimensions: 1.08" x 2.10". Accepts Magnum water neck only.

EFI

RPM Air-Gap for Chrysler Magnum V8 #7577

SUPERCHARGERS

Designed for 1992 & later 5.2L (318 c.i.d.) and 1993 & later 5.9L (360 c.i.d.) Chrysler Magnum V8's, the RPM
Air-Gap manifold allows the use of a carburetor for engine swaps in early muscle cars and street rods.
This dual-plane manifold design incorporates the same race-winning Air-Gap technology thats been used
on our Victor Series competition intakes for years for outstanding performance in the 1500 to 6500 rpm
range. The Air-Gap design features an open air space that separates the runners from the hot engine oil
resulting in a cooler, denser charge for more power. Match with Performer RPM Magnum cylinder heads
#61779 for maximum performance.
RPM Air-Gap Magnum (non-EGR) l ........................................................................................................#7577

POWER PACKAGES KITS

Carburetor Recommendations: Use appropriate racing carburetor. Installation Notes: Recommended intake gasket:
Edelbrock #7276. Manifold ht.: A-6.30", B-6.30" (see page 81-82). Port exit dimensions .98"x 2.15".

CAMSHAFT & VALVETRAIN

Designed for small-block Chrysler engines with conventional rectangular port heads like Edelbrock
Performer RPM cylinder heads or Victor heads, this single-plane Air-Gap style manifold operates from
3500 to 8000 rpm. Testing has shown substantial mid range gains over the current designs. The runners
have been cast in such a way to insure enough metal thickness to allow for gasket matching and porting.
Accepts 1975 and earlier waterneck only.
Super Victor Small-Block Chrysler (non-EGR) l ..................................................................................#2815
Super Victor Small-Block Chrysler EFI (non-EGR) l ............................................................................#28155
Super Victor EFI 340/360 Fuel Rail Kit (Standard injectors with stands) .............................................#3641

MANIFOLDS GASKETS CYLINDER HEADS

VICTOR W-2 (3500-8000 RPM)

CARBURETORS
CYLINDER HEADS GASKETS MANIFOLDS

MANIFOLDS

PERFORMER RPM 383 (1500-6500 RPM)

Designed for 361-383-400 c.i.d. Chryslers. Dual-plane design results in excellent low-end torque and highrpm power. High flow runner design will handle the popular stroker combinations. For high-performance
street/strip applications. Will not fit 1962-64 Max Wedge heads.
Performer RPM 383 (non-EGR) l ............................................................................................................... #7186
Carburetor Recommendations: Edelbrock Thunder Series AVS or Performer Series carb, 650-800 cfm (see pages 13-15), use
our #1481 or #1843 Throttle/Transmission Lever Kit. Installation Notes: Recommended intake gasket: Edelbrock #7225.
Manifold height.: A-4.90", B-5.80"; Carb pad height: 5.35" (see pages 81-82). Port exit dimensions: 1.13" x 2.13".
Camshaft Recommendations: Performer RPM #7194. See page 122 for specs.
Performer RPM 383 #7186

CAMSHAFT & VALVETRAIN

TORKER 383 (2500-6500 RPM)

Designed for 361-383-400 Chrysler V8's that measure
7.75" across block. Great for street high-performance
engines operating between 2500 and 6500 rpm where
low-end torque is not a requirement.
Torker 383 (non-EGR) l ........................................#3010

KITS POWER PACKAGES

Carburetor Recommendations: Edelbrock Thunder Series

AVS or Performer Series carb, 650-800 cfm (see pages 13-15),
use our #1481 or #1843 Throttle/Transmission Lever Kit.
Installation Notes: Recommended intake gasket: #7225.
Manifold height: A-3.75", B-4.60"; Carb pad height: 4.17"
(see pages 81-82). Port exit dimensions: 1.10" x 2.16".
Torker 383 #3010

CRATE ENGINES

EFI

SUPERCHARGERS

VICTOR 383 (3500-7500 RPM)

Victor 383 #2886

Now the latest Victor series design is available for competition Chrysler B Series Wedge engines
(361-383-400 c.i.d.). The computer-generated runners easily handle the high airflow requirements demanded
by large displacement low-deck engines. This extra tall single plane manifold combines a long runner,
line of sight layout, and extended divider walls to maximize torque, power and fuel distribution throughout
the mid and upper rpm range. Weve added extra material to the square bore carburetor pad and included
the inside bolt pattern so it can be easily opened up for Thermo-Quad applications. Includes nitrous bosses.
Match with Edelbrock Performer RPM or Victor aluminum cylinder heads for even higher performance
potential. The #7799 valley cover is required when used with Edelbrock Victor series cylinder heads.
Victor 383 (non-EGR) l ...............................................................................................................................#2886
Valley Cover for B Series B/B Chrysler Engines
(383-400) (required with Edelbrock Victor Series heads) l....................................................................#7799

WATER PUMPS

Carburetor Recommendations: Use appropriate racing carburetor. Installation Notes: Recommended intake gasket:
#7225. Manifold height: A-6.13", B-6.13". (see page 81-82). Port exit dimensions: 1.15" x 2.17".

ACCESSORIES

Plate #7799

CHRYSLER 413-440 V8

PERFORMER 440 (IDLE-5500 RPM)

NITROUS

Designed for street 413-426-440 c.i.d. Chrysler V8's that measure 8.75" across block.
Will not fit 1962-64 Max Wedge heads.
Performer 440 (EGR/non-EGR) l...................#2191

FUEL PUMPS

Carburetor Recommendations: OEM 4-bbl.

Edelbrock Thunder Series AVS or Performer Series carb,
650-800 cfm (see pages 13-15), use our #1481 or #1843
Throttle/Transmission Lever Kit.
Installation Notes: Recommended intake gasket: #7225.
Manifold height: A-3.80", B-4.80", measured to engine
block; Carb pad height: 4.30" (see pages 81-82). Port exit
dimensions: 1.12" x 2.14". May require different EGR valve,
see installation instructions. Camshaft Recommendations:
Performer Plus #2192. See page 121 for specifications.

SPORTSWEAR
INDEX

B/B CHRYSLER

Performer 440 #2191

57

WWW.EDELBROCK.COM

CARBURETORS

B/B CHRYSLER MANIFOLDS

Designed for 413-426-440 c.i.d. Chrysler V8's. Dual-plane design results in excellent low-rpm torque
and outstanding high-rpm hp. For high-performance street/strip applications. Will not fit 1962-64 Max
Wedge heads. Available with satin or black powder coated finish, see page 29.
Satin
Black
Performer RPM 440 (non-EGR) l ................................................................................#7193 ...................#71933

Performer RPM 440 #7193

CAMSHAFT & VALVETRAIN

Carburetor Recommendations: Edelbrock Thunder Series

AVS or Performer Series carb, 650-800 cfm (see pages
13-15), use our #1481 or #1843 Throttle/Transmission
Lever Kit. Installation Notes: Recommended intake gasket:
#7225. Manifold height: A-4.90", B-5.80"; Carb pad height:
5.35" (see pages 81-82). Manifold is 1.7" taller than stock.
Port exit dimensions: 1.13" x 2.09". Manifold measure
8.75" across block. Camshaft Recommendations:
Performer RPM #7194. See page 122 for specifications.

Designed for street 413-426-440 c.i.d. Chrysler V8's. They measure 8.75" across block.
Manifold not equipped with EGR. Will not fit 1962-64 Max Wedge heads.
Torker II 440 (non-EGR) l ...........................................................................................................................#5091
Carburetor Recommendations: Edelbrock Thunder Series AVS or Performer Series carb, 750-800 cfm (see pages 13-15),
use our #1481 or #1843 Throttle/Transmission Lever Kit. Installation Notes: Recommended intake gasket: #7225.
Manifold height: A-4.15", B-5.20", measured to engine block; Carb pad height: 4.67" (see pages 81-82). Port exit
dimensions: 1.10" x 2.17".

Designed for 440 c.i.d. Chrysler engines with 3x2-bbl. carbs, also fits 413 and 426 Wedge. #2475 is stock
replacement/street legal part for 440 V8's with OEM 3x2-bbl. carbs; 1968-71. This manifold was original
equipment on Chrysler 440 Six-Pack engines, Chrysler #P04529056. Will not fit 1962-64 Max Wedge heads.
CH-6B (non-EGR) l ......................................................................................................................................#2475
CH-6B #2475

EMISSIONS GUIDE

PLEASE REFER TO PAGE 212 FOR MORE INFORMATION REGARDING THE EMISSIONS GUIDE.

58

INDEX

l 50-STATE LEGAL l RACING ONLY l PRE-POLLUTION CONTROLLED VEHICLES l STOCK REPLACEMENT l ENGINE SWAP

SPORTSWEAR

Throttle Body Recommendations: Edelbrock #3869, #38693, #3818 or #38183. Installation Notes: Recommended gasket: Edelbrock
#7225. Manifold Dimensions: A-9.70", B-9.60", C-15.90", D-4.0", E-15, (see page 81-82). Port exit dimensions: 1.12" x 2.12".

FUEL PUMPS

Pro-Flo XT
Chrysler 440
EFI #71443

The Pro-Flo XT Chrysler 440 EFI intake manifold is engineered with a large plenum and long tapered
runners to deliver maximum horsepower and broad torque band throughout the rpm range 1500-7000 rpm.
Features include a 90mm throttle bore opening. This manifold produced 20 more horsepower over our
#35090 manifold at 5500 rpm. Accepts Pro-Flo XT throttle body #3869 or Ford throttle body #3818.
Compatible with B/B Chrysler XT Fuel Rail Kit #3644 (sold separately).
Pro-Flo XT Chrysler 440 EFI Manifold ll ..............................................................................................#7144
Pro-Flo XT Chrysler 440 EFI Manifold with Black Powder Coated Finish ll ...............................#71443
Fuel Rail Kit for B/B Chrysler ..................................................................................................................... #3644

NITROUS

PRO-FLO XT CHRYSLER 440 EFI (1500-7000 RPM)

ACCESSORIES

Carburetor Recommendations: OEM 3x2-bbls. Installation Notes: Recommended intake gasket: #7225. Manifold height:
A-4.875", B-5.63" measured to engine block; Carb pad height: 5.25" (see pages 81-82). Port exit dimensions: #2475 - 1.10" x 2.12".

WATER PUMPS

CH-6B CHRYSLER 6-PACK (2500-6500 RPM)

CRATE ENGINES

Carburetor Recommendations: Edelbrock Thunder Series AVS 650 cfm or Performer Series #1405 carb, 600 cfm
(see pages 13-15). Installation Notes: Recommended intake gasket: #7225. Manifold height: A-4.45", B-4.88", measured
to engine block; Carb pad height: 4.66" (see pages 81-82). Port exit dimensions: 1.14" x 2.10".

Chrysler CH-28 #5440

EFI

Designed for 413-426-440 c.i.d. Chrysler V8's. Use with Performer-Plus cam #2192 for low-end torque
or Performer RPM cam #7194 for top-end power. Will not fit 1962-64 Max Wedge heads. Carb center
to carb center: 6-7/16". Manifold measures 8.75" across block.
Chrysler CH-28 (non-EGR) l.......................................................................................................................#5440

SUPERCHARGERS

CHRYSLER CH-28 DUAL-QUAD (1500-6000 RPM)

POWER PACKAGES KITS

TORKER II 440 (2500-6500 RPM)

Torker II 440 #5091

MANIFOLDS GASKETS CYLINDER HEADS

PERFORMER RPM 440 (1500-6500 RPM)

CARBURETORS
CYLINDER HEADS GASKETS MANIFOLDS

MANIFOLDS

VICTOR 440 (3500-7500 RPM)

For competition and high-rpm 413-426-440 c.i.d. Chrysler V8's, the Victor 440 has an all-new runner design
that delivers maximum power from 3500 to 7500 rpm. This single-plane intake manifold includes nitrous
bosses and is designed for square-bore carburetors. Dual carburetor bolt hole patterns are provided
for both standard and Thermo-Quad carbs, with sufficient carburetor pad material for conversion to a
Thermo-Quad carburetor for Super Stock applications. Match this race-winning manifold with Edelbrock
Performer RPM Chrysler 440 aluminum cylinder heads #60189 or #60929 or Victor heads #77919 or #77929 for
maximum performance. Will not fit 1962-64 Max Wedge heads. Victor 440 EFI also available with fuel injector
bosses for fuel injection. The #7798 valley cover is required when used with Edelbrock Victor Series heads.
Victor 440 (non-EGR) l ...............................................................................................................................#2954
Victor 440 EFI (non-EGR) l .........................................................................................................................#29545
Valley Cover for RB B/B Chrysler Engines
(413-440) (required w/ Edelbrock Victor Series heads) ............................................................................#7798
Victor 440 EFI Fuel Rail Kit (standard injectors with stands).................................................................#3640
Carburetor Recommendations: Use appropriate racing carburetor. Installation Notes: Recommended intake gasket:
Edelbrock #7225. Manifold height: A-6.10", B-6.10" , (see page 81-82).Port exit dimensions: 1.15" x 2.17".

SUPER VICTOR 440 (3500-8000 RPM)

Super Victor Max Wedge Intake #2893

SUPERCHARGERS

KITS POWER PACKAGES

CAMSHAFT & VALVETRAIN

Victor 440 #2954

These single-plane intake manifolds are designed for 413-440-500+ RB with standard or Max Wedge
heads and 4500 Series carburetors. For competition and high-rpm 413-426-440 c.i.d. Chrysler V8's, the
Super Victor 440 #2891 and #2893 have an all-new runner design that delivers maximum power from
3500 to 8000 rpm in drag race applications. #2891 features standard 440 port exit sizes 1.13" x 2.17" to
match with Edelbrock Victor 440 aluminum cylinder heads #77919 or #77929. Super Victor 440 Max Wedge
#2893 is designed to fit 1962-64 Max Wedge heads or the Edelbrock Victor Max Wedge cylinder heads
#77939 and #77949 for maximum performance. The manifold port exits are CNC machined to 1.30" x 2.58".
The #7798 valley cover is required when used with Edelbrock Victor Series cylinder heads.
Super Victor 440 for 4500 Series Carb l .................................................................................................#2891
Super Victor 440 Max Wedge for 4500 Series Carb l .........................................................................#2893
Valley Cover for RB B/B Chrysler Engines
(413-440) (required w/ Edelbrock Victor Series heads) ............................................................................#7798

EFI

Carburetor Recommendations: Use appropriate 4500 Series racing carburetor. Installation Notes: Recommended intake gasket:
(for #2891); Fel-Pro #1216 or equivalent 1.23" x 2.27", for an area of 2.76 sq. inches. Custom gasket trimming is needed if larger
area is desired. (for #2893); Mopar Performance P/N P5249643, Fel-Pro #1218 or equivalent 2.63" x 1.34" for an area of 3.52 sq.
inches. Custom gasket trimming is needed if larger area is desired. See pages 81-82 for manifold reference dimensions.
#7524

CRATE ENGINES

CHRYSLER 426-572 V8

WATER PUMPS

DUAL-QUAD HEMI (2,500-6500 RPM)

#75245

These Dual-Quad HEMI intake manifolds are intended for use with Mopar Gen II (1964-71)
426-572 HEMI engines operating in the 2,500 to 6,500+ range. These new intake manifolds
are a single-plane Air-Gap design with a dual square-bore 4150 style carburetor pad.
Carburetor spacing and height are the same as Mopar Performance dual-quad #P5153737,
making it a direct bolt-on to all vehicles with a shaker hood. They also retain the same
carburetor linkage location from the factory. The Dual-Quad HEMI is compatible with factory
style cylinder heads, but optimized for use with Edelbrock Victor Jr. HEMI cylinder heads.
Requires Edelbrock Coil Bracket #8079 for use with OE style coils.

ACCESSORIES

Dual-Quad Chrysler Gen II 426-572 HEMI Intake Manifold Carbureted l ..........................................#7524

Dual-Quad Chrysler Gen II 426-572 HEMI Intake Manifold EFI l .........................................................#75245
Victor EFI Fuel Rail Kit (tall 60mm injectors) ..............................................................................................#3660
Coil Bracket (for use with Gen II HEMI, B and RB)...................................................................................#8079

NITROUS

Carburetor Recommendations: Edelbrock Thunder Series AVS or Performer Series (600-800 cfm) Carburetor.
Throttle Body Recommendations: Edelbrock #38783 with progressive linkage #7094.
Fuel Rail Recommendations: Use Edelbrock fuel rail kit #3660 with
Edelbrock injectors #3686. Installation Notes: Recommended intake
gasket: Edelbrock #7278. Manifold height: A-4.68", B-5.51"; Carb pad
height: 5.10". Port exit dimensions: 1.80 x 1.98.

FUEL PUMPS
SPORTSWEAR
INDEX

B/B CHRYSLER RACE & HEMI

HEMI is a registered trademarks of the Chrysler Group, LLC

59

Coil Bracket
#8079

WWW.EDELBROCK.COM

CARBURETORS

FORD FLATHEAD MANIFOLDS

SLINGSHOT MANIFOLD

This is the Intake

Manifold that Started it all!
The Slingshot, Manifold #1103

This is a reproduction of the original intake manifold designed by Vic Edelbrock Sr. in 1938. The Slingshot
is a real show stopper and even includes stainless acorn nuts for mounting the two halves. Match with
our block letter heads for a classic look. Will fit Ford and Mercury engines made from 1938 to 1948.
Includes assembly hardware and gasket #8700.
Slingshot Manifold l..................................................................................................................................#1103
Slingshot Manifold Gasket (located between manifold top and bottom pieces) ...............................#8700
Carburetor Recommendations: Edelbrock 94 #1151 (see page 16 for more information). Installation Notes: Use linkage
kit #1032; carb stud kit #8006. Recommended intake gasket: Edelbrock #7234 or Fel-Pro #MS2853. Manifold height:
A-7.75", B-7.75" , (see page 81-82). Port exit dimensions: 1.3" x 1.7". See page 103 for cylinder heads.

A truly classic race manifold; the Super Dual features 180 firing order, eliminated heat crossover and
carb location over port openings. Designed for Ford and Mercury engines made from 1938 to 1948.
Super Dual Manifold (includes generator bracket #1145) l ................................................................#1100

TRIPLE DEUCE MANIFOLD

Carburetor Recommendations: Edelbrock 94 #1151 (see page 16 for more information). Installation Notes: Use
progressive linkage kit #1033 or non-progressive kit #1034; carb stud kit #8006: generator stud kit #8506. Recommended
intake gasket: Edelbrock #7234 or Fel-Pro #MS2853. Manifold height: A-3.66", B-3.66", (see page 81-82). Port exit
dimensions: 1.3" x 1.7". See page 103 for cylinder heads.

This manifold allows the use of square-bore carbs such as the Edelbrock Performer Series or Thunder Series
AVS 500 cfm on the 1949-1953 Ford Flathead engine. This is a reproduction of the vintage Edelbrock #452
two-piece manifold with a new carb adapter flange.
Ford Flathead 4-Barrel Manifold for 1949-53 l .....................................................................................#1107
Carb Adapter Flange .................................................................................................................................................#1106

GENERATOR BRACKETS

ACCESSORIES

Ford Flathead
4-Barrel #1107

1940-41 Generator Bracket (straight) ........................................................................................................#1144

1942-48 Generator Bracket (offset)............................................................................................................#1145
1949-53 Generator Bracket and Water Neck 1-1/4" Kit (offset) ...........................................................#1146
1938-48 Generator Bracket Stud Kit..........................................................................................................#8506

WATER PUMPS

Carburetor Recommendations: Edelbrock Performer Series carb, 500 cfm or Thunder Series AVS 500 cfm (see pages 13-15).
Installation Notes: Recommended intake gasket: Edelbrock #7234 or Fel-Pro #MS2853. Manifold height: A-4.06", B-6.06" ,
(see page 81-82). Port exit dimensions: 1.3" x 1.7". See page 103 for cylinder heads.

CRATE ENGINES

Triple
Deuce #1109

EFI

FORD FLATHEAD 4-BARREL MANIFOLD

SUPERCHARGERS

Triple
Deuce #1108

These reproductions of the vintage Edelbrock manifold #SU 359 and #SU 349 allow the use of three
2-barrel carburetors on 1938-1948 and 1949-1953 Ford Flathead engines. #1109 features front road draft
and 1-3/8" diameter oil fill bosses and a raised fuel pump boss. They accept #1151 and #1152 Edelbrock 94
3-bolt, Stromberg 3-bolt (97 type), Holley 3-bolt and Demon 98 carburetors.
Triple Deuce Manifold for 1938-48 l.......................................................................................................#1108
Triple Deuce Manifold for 1949-53 l.......................................................................................................#1109

POWER PACKAGES KITS

Super Dual #1100 with

Generator Bracket #1145

Carburetor Recommendations: Edelbrock 94 #1151 (see page 16 for more information). Installation Notes: Use linkage kit #1032;
carb stud kit #8006; generator stud kit #8506. Recommended intake gasket: Edelbrock #7234 or Fel-Pro #MS2853. Manifold
height: A-3.53", B-4.63" , (see page 81-82). Port exit dimensions: 1.3" x 1.7". See page 103 for cylinder heads.

CAMSHAFT & VALVETRAIN

SUPER DUAL MANIFOLD

MANIFOLDS GASKETS CYLINDER HEADS

1938-53 FORD/MERCURY FLATHEAD V8

NITROUS

Carb Adapter
Flange #1106

FUEL PUMPS

EMISSIONS GUIDE

PLEASE REFER TO PAGE 212 FOR MORE INFORMATION REGARDING THE EMISSIONS GUIDE.

60

INDEX

l 50-STATE LEGAL l RACING ONLY l PRE-POLLUTION CONTROLLED VEHICLES l STOCK REPLACEMENT l ENGINE SWAP

Flathead Cylinder
Heads and Stud Kits
See Page 103

SPORTSWEAR

Progressive Linkage Kit #1033

See Page 16

Vintage Carb and

Manifold Kit #2013
See Page 133

CARBURETORS
CYLINDER HEADS GASKETS MANIFOLDS

MANIFOLDS

FORD 260-289-302 V8

PERFORMER 289 (IDLE-5500 RPM)

CAMSHAFT & VALVETRAIN

Performer 289
#21213 with Black
Powder Coated Finish

Designed for street 260-289-302 c.i.d. Ford V8's without EGR. Will not fit Boss 302 or 255 c.i.d. V8s. Edelbrock
carbs will work with Ford automatic overdrive trans (AOD) when used with Lokar bracket SRK-4000, for
more info call (865) 966-2269 or go to www.lokar.com. Available with satin finish, polished, black powder
coat or with EnduraShine finish for a look youve got to see to believe, see page 29.
Satin Polished Black EnduraShine
Performer 289 (non-EGR) ll .............................................................#2121 ...... #21211..... #21213........#21214
Carburetor Recommendations: Edelbrock Thunder Series AVS or Performer Series carb, 500-650 cfm (see pages 13-15),
for auto. trans. use our #1483 & #1490 or #1844. Installation Notes: Recommended intake gasket: Edelbrock #7220.
Manifold height: A-3.50", B-4.75"; Carb pad height: 4.12" (see page 81-82). Port exit dimensions: 1.09" x 1.84".
Camshaft Recommendations: Performer Plus #2122. See page 121 for specifications.

PERFORMER 302 (IDLE-5500 RPM)

KITS POWER PACKAGES

Designed for carbureted 302 c.i.d. Ford V8's with EGR. Replaces the stock 4V EGR manifold using the stock
4V adapter. Both manifolds can be adapted for 4V use by using our #8053 4V EGR plate (see page 26) and
the OEM EGR valve and gasket. Our #8017 adapter kit and Ford #E4ZZ9A-589E spacer may be substituted
for our #8053 EGR plate (1983-85 H.O. Mustangs/Capris come with this Ford spacer). For 4V off-highway
non-EGR applications, use our #8714 spacer. Edelbrock carbs will work with Ford automatic overdrive
trans (AOD) when used with Lokar bracket SRK-4000, for more info call (865) 966-2269 or go to
www.lokar.com.
Performer 302 4V (EGR) ll .......................................................................................................................#3721
Performer 302 2V (EGR) ll .......................................................................................................................#3723

Performer 302 2-V

EGR #3723

Carburetor Recommendations: #3721: OEM 4-bbl. use our #8011 (if necessary) #3723: OEM 2-bbl. #3723 can be used for
off-road applications with Edelbrock Thunder Series AVS or Performer Series carb, 500-650 cfm (non-EGR, see pages 13-15)
use adapter #8714. For auto. trans. use our #1483 & #1490 or #1844. Installation Notes: Recommended intake gasket:
Edelbrock #7220. #3721 includes gaskets & 4-bbl. plate #8017 for sealing of OEM EGR plate & carb. Replacement EGR
plate gaskets for #3723: #3896 & #3897. Manifold height: #3721 A-3.13", B-4.31" without EGR plates installed; Carb pad
height: 3.72" (see pages 81-82 ). Manifold height: #3723 A-4.00", B-5.19" with EGR plates installed; Carb pad height: 4.59"
(see pages 81-82). Port exit dimensions: .90" x 1.90".

EFI

SUPERCHARGERS

S/B FORD

Performer 289 Triple-Deuce #5412

Manifold #7121 is approved for
IMCA sanctioned racing events,
see rulebook for details

NITROUS

ACCESSORIES

WATER PUMPS

CRATE ENGINES

PERFORMER 289 TRIPLE-DEUCE (IDLE-5500 RPM)

INDEX

SPORTSWEAR

FUEL PUMPS

Performer RPM 302 #7121

Performer RPM 302 #71214 with EnduraShine Finish

61

This new intake is designed for 289-302-347 small-block Fords for triple-deuce applications. This manifold
offers excellent performance out-of-the-box as well as a great vintage look. Use with Edelbrock 94 #1151
and #1152 carbs, progressive throttle linkage #1033 and chrome air cleaners #1202 for great driveability
and looks. Match with our Performer-Plus cam #2122 for low-end torque. The 3-bolt carb flange has 1.25"
machined bores and 4.81 spacing. Match with our Classic finned aluminum valve covers #4160, #41603
and #41609 for the ultimate vintage look. See page 133 for the complete carburetor and manifold kit.
Performer 289 Triple-Deuce (non-EGR) ll ...........................................................................................#5412
Progressive Linkage Kit ll .....................................................................................................................#1033
Performer 289 Triple Deuce Manifold and Edelbrock 94 Carb Kit......................................................#2017
Carburetor Recommendations: (1) Edelbrock 94 #1151 and (2) Edelbrock 94 #1152. (see page 16).
Installation Notes: Recommended intake gasket: Edelbrock #7220. Manifold height: A-3.93", B-4.56";
Carb pad height: 4.25" (see pages 81-82). Port exit dimensions: 1.04" x 1.86". Small cap distributor required, Call
Edelbrock Tech Support, 800-416-8628 for recommendations.

PERFORMER RPM 302 (1500-6500 RPM)

Designed for street 289-302 c.i.d. Ford V8's. This dual-plane high rise manifold has excellent high rpm
power while retaining throttle response. No provisions for exhaust heated choke. Edelbrock carbs will
work with Ford automatic overdrive trans (AOD) when used with Lokar bracket SRK-4000, for more info
call (865) 966-2269 or go to www.lokar.com.
Satin Polished Black EnduraShine
Performer RPM 302 (non-EGR) lll ...............................................#7121 ...... #71211..... #71213........#71214
Carburetor Recommendations: Edelbrock Thunder Series AVS or Performer Series carb, 600-750 cfm (see pages 13-15),
for auto. trans. use our #1483 & #1490 or #1844. Installation Notes: Will not fit 255 c.i.d. V8. Recommended intake gasket:
Edelbrock #7220. Manifold Height: A-4.30", B-5.50"; Carb pad height: 4.90" (see pages 81-82). Port exit dimensions: 1.05" x 1.86".
Camshaft Recommendations: Performer RPM #7122. See page 122 for specifications.

WWW.EDELBROCK.COM

CARBURETORS

S/B FORD MANIFOLDS

THE FIRST DUAL-PLANE MANIFOLD DESIGN FOR HIGH-PERFORMANCE

STREET WITH OUR PROVEN, RACE-WINNING AIR-GAP FEATURE

RPM Air-Gap
#7521

Designed for street 289-302 c.i.d. Ford V8's, the RPM Air-Gap incorporates the same race-winning
technology thats been used on our Victor Series competition intakes for decades. The Air-Gap design
features an open air space that separates the runners from the hot engine oil resulting in a cooler,
denser charge for more power. Includes nitrous bosses. No provision for exhaust heated chokes and
no exhaust crossover. Edelbrock carbs will work with Ford automatic overdrive trans (AOD) when used
with Lokar bracket SRK-4000, for more info call (865) 966-2269 or go to www.lokar.com. Available with satin,
polished, black powder coated or EnduraShine finish, see page 29.
Satin
Polished
Black
EnduraShine
RPM Air-Gap 302 (non-EGR) ll ..........................................#7521 .......... #75211 .......... #75213 .............#75214

TORKER II 302 (2500-6500 RPM)

RPM Air-Gap #75213

Carburetor Recommendations: Edelbrock Thunder Series AVS or Performer Series carb, 600-800 cfm (see pages 13-15),
for auto. trans. use our #1483 & #1490 or #1844. Installation Notes: Will not fit 255 c.i.d. Ford V8. Recommended intake
gasket: Edelbrock #7220. Manifold height: A-4.00", B-5.18"; Carb pad height: 4.59" (see pages 81-82). Port exit dimensions:
1.03" x 1.93". Camshaft Recommendations: Torker Plus #5022. See page 122 for specifications.
Torker II 302 #5021

Carburetor Recommendations: Edelbrock Thunder Series AVS #1803 and #1804, 500 cfm (see pages 13-15).
#1403 and #1404, 500 cfm (see page 13 for more information). Installation Notes: Recommended intake gasket: Edelbrock
#7220. Manifold height: A-3.90", B-4.75"; Carb pad height: 4.32" (see pages 81-82). Port exit dimensions: 1.03" x 1.92".

RPM AIR-GAP DUAL-QUAD (1500-6500 RPM)

EMISSIONS GUIDE

PLEASE REFER TO PAGE 212 FOR MORE INFORMATION REGARDING THE EMISSIONS GUIDE.

62

INDEX

l 50-STATE LEGAL l RACING ONLY l PRE-POLLUTION CONTROLLED VEHICLES l STOCK REPLACEMENT l ENGINE SWAP

SPORTSWEAR

Edelbrock manifolds
are manufactured
in the USA for
unsurpassed quality.

Description
Page No.
Performer-Plus Camshaft ..................................................................................................................................121
Performer Cylinder Heads .................................................................................................................................103
Roller Timing Set .................................................................................................................................................127
Cam Gear Drive ...................................................................................................................................................126
Valve Springs............................................................................................................................................... 117-118
Retainers ...................................................................................................................................................... 117-118
Fuel Pump..................................................................................................................................................... 202-205

FUEL PUMPS

RPM Air-Gap Dual-Quad

with EnduraShine Finish #75354

NITROUS

MATCHING EDELBROCK PARTS FOR S/B FORD

ACCESSORIES

Carburetor Recommendations: Edelbrock Thunder Series AVS #1803 and #1804, 500 cfm (see pages 13-15).
#1403 and #1404, 500 cfm (see page 13 for more information). Installation Notes: Recommended intake gasket: Edelbrock
#7220. Manifold height: A-4.85", B-5.70"; Carb pad height: 5.28" (see pages 81-82). Port exit dimensions: 1.05" x 1.90".

WATER PUMPS

RPM Air-Gap Dual-Quad #7535

Designed for 289-302 small-block Fords, these intakes are taller than the low-profile F-28 intake and
offer performance improvements in the 1500-6500 rpm range. The large runners feature our unique
Air-Gap design that separates the runners from the hot engine valley for a cooler, denser charge
and more horsepower. Also available in complete manifold and carb kits, see page 135.
RPM Air-Gap Dual-Quad Manifold for Ford 289-302 (non-EGR) ll..................................................#7535
RPM Air-Gap Dual-Quad Manifold for Ford 289-302 with EnduraShine Finish (non-EGR) ll ....#75354

CRATE ENGINES

Ford F-28 #5435

EFI

Designed for 289-302 c.i.d. Ford V8's. This manifold offers excellent performance as well as a hot looking
package. With two Edelbrock carbs in-line, progressive throttle linkage and braided fuel line, this lowprofile design allows adequate hood clearance and maintains great driveability. Mounting bosses for
throttle cable brackets make the F-28 suitable for late-model applications. Carb center to carb center is
6-7/16". Use Performer-Plus cam #2122 for low-end torque or Torker-Plus cam #5022 for top-end power.
See pages 188-190 for chrome, Elite and Classic Series oval air cleaners for a great looking package.
F-28 Manifold (non-EGR) ll.....................................................................................................................#5435

SUPERCHARGERS

F-28 DUAL-QUAD (1500-6500 RPM)

POWER PACKAGES KITS

Designed for street 289/302 c.i.d. Ford V8's. Will not fit Boss 302. Manifold not equipped with EGR.
Will not fit 255 c.i.d. Ford V8 engines. Not for heavy vehicles. Edelbrock carbs will work with Ford
automatic overdrive trans (AOD) when used with Lokar bracket SRK-4000, for more info call
(865) 966-2269 or go to www.lokar.com.
Torker II 302 (non-EGR) ll .......................................................................................................................#5021

CAMSHAFT & VALVETRAIN

Carburetor Recommendations: Edelbrock Thunder Series AVS or Performer Series carb, 600-800 cfm (see pages 13-15),
for auto. trans. use our #1483 & #1490 or #1844. Installation Notes: Will not fit 255 c.i.d. V8. Recommended intake gasket:
Edelbrock #7220. Manifold Height: A-4.30", B-5.50"; Carb pad height: 4.90" (see pages 81-82). Port exit dimensions: 1.04" x 1.85".

MANIFOLDS GASKETS CYLINDER HEADS

RPM AIR-GAP 302 (1500-6500 RPM)

CARBURETORS
CYLINDER HEADS GASKETS MANIFOLDS

MANIFOLDS
Manifold #2921 is approved for
IMCA sanctioned racing events,
see rulebook for details

S/B FORD RACE

VICTOR JR. 302 (3500-8000 RPM)

For Ford 289/302 competition engines using modified stock cast iron or aftermarket Windsor-style
cylinder heads such as Edelbrock heads #60259 and #77169 or equivalent. Victor Jr. #2921 has bosses
for rear water crossover. Port exit size at cylinder head is 1.08" x 1.90" with enough extra material to
open it up to 1.18" x 2.10".
Victor Jr. 302 (non-EGR) l..........................................................................................................................#2921
Carburetor Recommendations: Use appropriate racing carburetor. Installation Notes: Recommended intake gasket:
Edelbrock #7220 or Fel-Pro #1250. Manifold height: A-5.50", B-5.50" (See pages 81-82).

Victor Jr. 302 #2921

SUPER VICTOR 8.2 (4500-9000 RPM)

KITS POWER PACKAGES

CAMSHAFT & VALVETRAIN

Designed for high-rpm and competition 302-347 engines with aftermarket Windsor-style racing cylinder
heads such as the Edelbrock Victor heads #77219 or Victor Jr. heads #77169, the Super Victor 8.2 is for
engines with a standard 8.2" deck height. Excellent for large displacement drag racing engines, this singleplane race manifold delivers big power gains from 4500 to 8500 rpm and includes nitrous and rear cooling
water bosses. The square-bore carburetor pad stands .850" taller than the Edelbrock Victor Jr. #2921.
Super Victor 8.2 (non-EGR) l.....................................................................................................................#2928
Super Victor EFI for 8.2 (non-EGR) l ........................................................................................................#29285
Ford Fuel Rail Kit (standard injectors with stands) .................................................................................#3620

SUPERCHARGERS

Super Victor 8.2 #2928

Super Victor EFI 8.2 #29285

Carburetor Recommendations: Use appropriate racing carburetor. Throttle Body Recommendations: Use #38783
4150 series 4V throttle body or #3849 EFI elbow and #3818 90mm Ford style throttle body. Installation Notes:
Recommended intake gasket: Fel-Pro #1262 or #1262R. Manifold height: A-6.35", B-6.35" (See pages 81-82).

FOR THE ULTIMATE IN PERFORMANCE MATCH

WITH EDELBROCK CYLINDER HEADS

Protect your investment

with Edelbrock
Performance Lubricants!

Break-In Oil contains a blend of hydro-processed

petroleum base stocks and additives that is ideal for
preparing metal surfaces for new and rebuilt engines.
Zinc Additive features a special formula with the
ideal chemistry to add wear protection to any motor oil
and extend engine life.
See page 126 for more information.

SUPER VICTOR 8.7 (5000-9000 RPM)

Super Victor 8.7 is designed for high-rpm or competition Windsor Ford V8's with an 8.7" deck height SVO
block. Ideal for use in drag racing applications operating between 5000 and 9000 rpm, the Super Victor
#2934 has an extra tall line of sight runner layout for maximum flow. Designed for square-bore carbs,
this single-plane manifold includes nitrous, rear cooling and throttle linkage bosses. Average runner cross
sectional area is 3.1 square inches and port openings are sized to match Fel Pro #1262 gaskets.
Super Victor 8.7 (non-EGR) l.....................................................................................................................#2934

INDEX

SPORTSWEAR

FUEL PUMPS

NITROUS

ACCESSORIES

WATER PUMPS

CRATE ENGINES

EFI

Match Victor Jr. intake manifolds

with Performer RPM cylinder head
#60259 or Victor Jr. cylinder head
#77189, see pages 103-105.

Super Victor 8.7 #2934

63

Carburetor Recommendations: Use appropriate racing carburetor. Installation Notes: Recommended intake gasket:
Fel-Pro #1262. Manifold height: A-6.35", B-6.35" See pages 81-82 for manifold reference dimensions.

WWW.EDELBROCK.COM

CARBURETORS

S/B FORD MANIFOLDS

PERFORMER 5.0 (IDLE-5500 RPM)

Performer 5.0
#3821 with PowderCoated Upper Plenum

Installation Notes: Recommended intake gasket: Edelbrock #7220. Air valve location same as stock. Port exit dimensions:
1.02" x 1.85". Overall height: 10.61". Manifold Spacer Kits: See page 79. Throttle Body Recommendations: See page 166.

Installation Notes: Recommended intake gasket: Edelbrock #7220. Port exit dimensions: 1.02" x 1.85". Overall height: 13.25".

SUPERCHARGERS

Performer
Truck 5.0 #3841

This intake manifold fits 1987-96 Ford 5.0L EFI V8 truck engines. The modular design incorporates the latest
air flow technology for maximum torque gains in the mid-range where trucks need it most. The upper and
plenum cover are powder-coated light titanium gray. The base is satin aluminum and not powder-coated.
Features include: broad power range from idle to 5500 rpm; removable plenum cover that allows access to
runners for modification; base manifold is CNC port matched to upper manifold for maximum performance.
This manifold accepts all stock hardware. Use with stock or stock replacement twin throttle body.
Performer 5.0 (EGR) l .................................................................................................................................#3841
Performer Truck 5.0 Plenum Cover Only (includes gasket)...................................................................#3883
Performer Truck 5.0 Gasket Set (includes base-to-upper & plenum cover gaskets) ........................#3833

POWER PACKAGES KITS

PERFORMER TRUCK 5.0 (IDLE-5500 RPM)

CAMSHAFT & VALVETRAIN

Designed for 1986-95 5.0L V8 Mustang engines, the Performer 5.0 EFI aluminum intake manifold represents
the standard for hot 5.0L performance. The modular design incorporates modern air flow technology
and CAD programming for maximum power gains up to 37 horsepower at 5500 rpm with no loss of
low speed torque. Features of the Performer 5.0 EFI manifold include: broad power range from idle to
5500 rpm; removable plenum cover that allows access to runners for modification; and base manifold
is CNC port matched to upper manifold for maximum performance. The upper and plenum cover are
powder-coated light titanium gray. The base is satin aluminum and not powder-coated. Combining the
Performer 5.0 intake manifold with other Power Package parts gives you even more power across the
entire rpm range. 1994-95 Mustangs engines require Throttle Body Adapter #3835 (see page 65).
Performer 5.0 (EGR) ll .............................................................................................................................#3821
Performer 5.0 Upper Plenum Only (includes plenum cover) ll ........................................................#3822
Performer 5.0 Base Only ll ....................................................................................................................#3820
Performer 5.0 Plenum Cover Only (includes gasket) ..............................................................................#7127
Performer 5.0 Gasket Set (includes base-to-upper and plenum cover gaskets) ................................#3832
Fuel Rail Kit For #3821 .................................................................................................................................#3628

MANIFOLDS GASKETS CYLINDER HEADS

FORD 5.0L EFI V8

EFI

EMISSIONS GUIDE

PLEASE REFER TO PAGE 212 FOR MORE INFORMATION REGARDING THE EMISSIONS GUIDE.

64

INDEX

l 50-STATE LEGAL l RACING ONLY l PRE-POLLUTION CONTROLLED VEHICLES l STOCK REPLACEMENT l ENGINE SWAP

SPORTSWEAR

Description
Page No.
Performer-Plus Camshaft ...................................................................................................................................121
Performer Cylinder Heads ..................................................................................................................................103
Roller Timing Set ..................................................................................................................................................127
Cam Gear Drive ....................................................................................................................................................126
Valve Springs................................................................................................................................................117-118
Retainers .......................................................................................................................................................117-118
Fuel Pump......................................................................................................................................................202-205

FUEL PUMPS

Edelbrock manifolds
are manufactured
in the USA for
unsurpassed quality.

MATCHING EDELBROCK PARTS FOR S/B FORD

NITROUS

Performer RPM II #71233 with Black

Powder Coated Finish

ACCESSORIES

Installation Notes: Recommended intake gasket: Edelbrock #7220. Air valve location is 0.30" higher and 0.50" forward
from stock. Port exit dimensions: 1.16" x 2.0". Recommended Cams: Ford SVO X-303 or Z-303. Overall height: 11.13".
Manifold Spacer Kits: See page 79. Throttle Body Recommendations: See page 166.

WATER PUMPS

The Performer 5.0 RPM II manifold for 1986-95 5.0L Mustang engines has shown significant gains in
horsepower over existing designs in the 1500 to 6500 rpm range, and is ideally suited for street and strip
applications. This manifold consists of a V-shaped crossover with an increasing cross-sectional area,
which passes over to eight large tapered runners. Our 70mm throttle body is recommended (75mm will
require port matching). 1994-95 Mustang engines require Throttle Body Adapter #38353 and Adapter Kit
#8025 (see page 65). May not fit with stock hood of 1994-95 Mustangs, aftermarket hood recommended.
Performer 5.0 RPM II (EGR, complete, base and upper) ll ................................................................#7123
Performer 5.0 RPM II with Black Powder Coated Finish (EGR, complete, base and upper) ll ..#71233
Performer 5.0 RPM II Gasket Kit ................................................................................................................#7233
Fuel Rail Kit for #7123 ..................................................................................................................................#3628

CRATE ENGINES

PERFORMER 5.0 RPM II (1500-6500 RPM)

CARBURETORS
CYLINDER HEADS GASKETS MANIFOLDS

MANIFOLDS

VICTOR 5.0 (4000-7500 RPM)

CAMSHAFT & VALVETRAIN

Victor 5.0
Manifold #2945

KITS POWER PACKAGES

THROTTLE BODY ADAPTERS FOR 1994-95 MUSTANGS

These adapters are required to install Edelbrock 5.0L manifolds #3821/#7123 on 1994-95 Mustang engines.
They must be used with Edelbrock 65mm, 70mm or stock throttle bodies. The powder-coating is the same
titanium gray used on the Performer 5.0L and Performer RPM II 5.0L manifolds are black for a matched set.
1994-95 Mustang Throttle Body Adapter for Edelbrock 5.0L Manifolds #3821 & #7126 l .............#3835
1994-95 Mustang Throttle Body Adapter for Edelbrock 5.0L
Manifolds #3821 & #7126 with Black Powder Coated Finish l ........................................................#38353
1994-95 Mustang EGR Supply Spacer for #7123 (use with #3835) ........................................................#8025

Throttle Body
Adapter #38353

PERFORMER 5.8L RPM II (1500-6500 RPM)

This manifold combination is designed for 1986-95 5.8L engines operating in the 1500 to 6500 rpm range,
and like the 5.0L RPM II, is ideally suited for street and strip applications. The top plenum is the same
as our 5.0L RPM II #7123 but is matched to a new base manifold with larger runners. The base manifold
has a rear PCV compatibility for Mustang applications. Aftermarket hood recommended. Upper manifold
is powder coated light titanium gray.
Performer RPM 5.8L II (EGR, complete, base and upper) ll ..............................................................#7185
Performer RPM 5.8L II (base manifold only) ll ....................................................................................#7184
Performer RPM 5.8L II (base-to-upper plenum gasket) ..........................................................................#7233

CRATE ENGINES

EFI

SUPERCHARGERS

Designed for 5.0L-based competition EFI engines, the Victor 5.0 EFI aluminum intake manifold is for
non-emission, racing applications. Intended for engines modified to produce 400 to 540+ horsepower,
this intake manifold features shorter and larger runners for power to 7500 rpm. Runners are 11.5" long
and 50% larger in area than Performer 5.0 #3821 runners. The base features an air-gap design and will
accept stock or stock replacement fuel rails. The upper manifold will clear tall valve covers and large fuel
pressure regulators. The upper and plenum cover are powder-coated light titanium gray. The base is satin
aluminum and not powder-coated. Designed to work with Edelbrock Victor Jr. or Victor cylinder heads,
see pages 105. Edelbrock 75mm throttle body is recommended for most applications with no EGR spacer.
Larger injectors will be needed depending upon power levels. 1994-95 Mustangs require conversion to
87-93 inlet systems. Manifold includes throttle cable bracket.
Victor 5.0 (non-EGR) l.................................................................................................................................#2945
Victor EFI Upper Plenum Only (includes plenum cover) l ...................................................................#2946
Victor 5.0 Base Only l................................................................................................................................#2944
Victor EFI Plenum Cover Only (includes gasket) l ................................................................................#2947
Victor EFI Gasket Set (includes base-to-upper and plenum cover gaskets) .......................................#7232
Fuel Rail Kit for #2945 ..................................................................................................................................#3628
Installation Notes: Recommended intake gasket: Fel-Pro #1262. See pages. 81-82 for reference dimensions.
Overall height: 11.40". Manifold Spacer Kits: See page 79. Throttle Body Recommendations: See page 166.

WATER PUMPS

Installation Notes: Recommended intake gasket: Fel-Pro #1262 or #1262R. Port exit dimensions: 1.16 x 2.00". Overall height: 11.67".
Manifold Spacer Kits: See page 79. Throttle Body Recommendations: See page 166.

FUEL PUMPS

NITROUS

ACCESSORIES

Performer
RPM II 5.8L
EFI #7185

SPORTSWEAR
INDEX

S/B FORD RACE

Victor Ford 5.8L

EFI #3887

65

VICTOR FORD 5.8L EFI (4000-7500 RPM)

Designed for 351W based competition engines, the Victor 5.8 EFI manifold is capable of supporting over
700 horsepower. The Victor Ford 5.8L manifold is designed for engine displacements of up to 427 cubic
inches. It features our race winning air-gap design which isolates the intake charge from the engine heat
that is present in the lifter valley. The manifolds runners have a large cross sectional area of 2.94 square
inches which is 54% larger than our #3884 base. The runners feature 1.20" x 2.0" exits and were developed
for maximum air flow when used with competition cylinder heads like our Victor Jr. or Victor Ford #77219
heads. The 12.5" runner length is optimized for sustainable power levels up to 7,500 rpm. The upper section
is powder coated titanium gray. Accepts 302 Mustang fuel rails with extended crossover. Edelbrock 75mm
throttle body is recommended for maximum performance. Throttle bodies on pages 166.
Victor Ford 5.8L (complete, non-EGR) l ...................................................................................................#3887
Victor Ford 5.8L (base only) l ....................................................................................................................#3886
Victor EFI Upper Plenum Only (includes plenum cover) l ...................................................................#2946
Victor EFI Plenum Cover Only (includes gasket) l ................................................................................#2947
Victor EFI Gasket Set (includes base-to-upper and plenum cover gaskets) .......................................#7232
Installation Notes: Recommended intake gasket: Fel-Pro #1262 or #1262R. Port exit dimensions: 1.20" x 2.00". Overall height: 11.58".
Manifold Spacer Kits: See page 79.

WWW.EDELBROCK.COM

CARBURETORS

S/B FORD MANIFOLDS

PERFORMER TRUCK 5.8L (IDLE-5500 RPM)

Performer
Truck 5.8 #3881

Installation Notes: Recommended intake gasket: Edelbrock

#7220. Port exit dimensions: 1.04" x 1.85". Overall height: 13.25".

MATCHING EDELBROCK PARTS FOR S/B FORD

Performer 351W #2181

SUPERCHARGERS

Description
Page No.
Performer-Plus Camshaft ..................................................................................................................................121
Performer Cylinder Heads .................................................................................................................................103
Roller Timing Set .................................................................................................................................................127
Cam Gear Drive ...................................................................................................................................................126
Valve Springs............................................................................................................................................... 117-118
Retainers ...................................................................................................................................................... 117-118
Fuel Pump..................................................................................................................................................... 202-205

POWER PACKAGES KITS

Performer Truck 5.8L Gasket Set #3833

CAMSHAFT & VALVETRAIN

Designed for 1988-96 Ford 5.8L, EFI, truck engines, the modular design of this manifold incorporates
the latest air flow technology for maximum torque gains in the mid-range. This manifold made 34 ft-lbs.
more torque than stock on our test engine. Other features include: broad power range from idle to 5500
rpm; removable plenum cover that allows access to runners; base manifold is CNC port matched to
upper manifold for maximum power; and accepts all stock hardware. The upper is powder-coated light
titanium gray, base is satin. Use with stock or stock
replacement twin throttle body. Will not fit vans.
Performer 5.8 (EGR) l .......................................#3881
Performer 5.8 Base Only with Rear PCV
(for 1986-93 Mustang 351W engine swaps
with #3822 or #7125 upper) .................................#3884
Replacement Gasket Set (includes base-to-upper
and plenum cover gaskets) ................................#3833

MANIFOLDS GASKETS CYLINDER HEADS

FORD 5.8L EFI V8

EFI

FORD 351 WINDSOR V8

Carburetor Recommendations: Edelbrock Thunder Series AVS or Performer Series carb, 600-650 cfm (see pages 13-15),
for auto. trans. use our #1483 & #1491 or #1844. Installation Notes: Use 12-bolt intake gasket set Edelbrock #7220
recommended. Van installations use OEM Ford van gasket set; will fit early 16-bolt head with Ford 16-bolt intake gasket
set. Choke block-off cover plate #8981 included. Manifold height: A-3.40", B-4.75"; Carb pad height: 4.07" (see pages 81-82).
Port exit dimensions: 1.10" x 1.80". Camshaft Recommendations: Performer Plus #2182. See page 121 for specs.

WATER PUMPS

Designed for street 351 c.i.d. Ford Windsor V8's. Will not fit Boss 351. Aftermarket 4-bbl carbs are not
compatible with Ford Auto Overdrive Transmission (AOD) unless used with Lokar bracket SRK-4000.
For more info call (865) 966-2269 or go to www.lokar.com.
Satin
Polished
Black
Performer 351W (non-EGR) l ......................................................... #2181 ....................#21811 ..................#21813

CRATE ENGINES

PERFORMER 351W (IDLE-5500 RPM)

ACCESSORIES

EMISSIONS GUIDE

PLEASE REFER TO PAGE 212 FOR MORE INFORMATION REGARDING THE EMISSIONS GUIDE.

66

INDEX

l 50-STATE LEGAL l RACING ONLY l PRE-POLLUTION CONTROLLED VEHICLES l STOCK REPLACEMENT l ENGINE SWAP

SPORTSWEAR

Performer 351W 2V
EGR #3781

Carburetor Recommendations: #3781: OEM 2V carburetor #3783: OEM 4V carburetor

Installation Notes: Use 12-bolt intake gasket set Edelbrock #7220 recommended. For van installations use OEM Ford
van intake gasket set; will fit early 16-bolt head with Ford 16-bolt intake gasket set. Replacement EGR plate gaskets:
#3896 & #3897. Choke block-off cover plate #8981 comes with intake manifolds. Manifold height: A-4.00", B-5.12" w/1"
EGR adapter #8053; Carb pad height: 4.56" (see pages 81-82). Port exit dimensions: .96" x 1.74".

FUEL PUMPS

Designed for street Ford 351-Windsors with EGR. Performer 351W #3783 includes provision for EFE valve
on H.O. engines. Edelbrock carbs will work with Ford automatic overdrive trans (AOD) when used with
Lokar bracket SRK-4000, for more info call (865) 966-2269 or go to www.lokar.com.
Performer 351W 2V (EGR, 4V off-road) l .................................................................................................#3781
Performer 351W 4V H.O., (EGR, 1984-86) l ..............................................................................................#3783

NITROUS

PERFORMER 351W EGR (IDLE-5500 RPM)

CARBURETORS

Performer RPM 351W #7181

Manifold #7181 is approved for

IMCA sanctioned racing events,
see rulebook for details

KITS POWER PACKAGES

RPM Air-Gap 351W #7581

Carburetor Recommendations: Edelbrock Thunder Series AVS or Performer Series carb, 650-800 cfm (see pages 13-15),
for auto. trans. use our #1483 & #1491 or #1844. Installation Notes: Use 12-bolt intake gasket set Edelbrock #7220
recommended. For van installations use OEM Ford van intake gasket set; will fit early 16-bolt head with Ford 16-bolt intake
gasket set. Manifold height: A-4.30", B-5.30"; Carb pad height: 4.80" (see pages 81-82). Port exit dimensions: 1.12" x 1.86".
Camshaft Recommendations: Performer RPM #7182. See pages 122 for specs.

Designed for street and high performance 351-400+ c.i.d. 351W Ford V8's, the RPM Air-Gap incorporates
the same race-winning design thats been used on our Victor Series competition intakes for decades.
The Air-Gap design features an open air space that separates the runners from the hot engine oil resulting
in a cooler, denser charge for more power. Larger cross sectional area and a taller carb flange than
#7181 for compatibility with large displacement, stroker 351W based engines. Includes bosses for nitrous
and rear water crossover. Edelbrock carbs will work with Ford automatic overdrive trans (AOD) when
used with Lokar bracket SRK-4000, for more info call (865) 966-2269 or go to www.lokar.com.
RPM Air-Gap 351W (non-EGR) l ................. #7581
RPM Air-Gap 351W with
EnduraShine Finish (non-EGR) l ................. #75814

SUPERCHARGERS

Carburetor Recommendations: Edelbrock Thunder Series

AVS or Performer Series carb, 650-800 cfm (see pages 13-15),
for auto. trans. use our #1483 & #1491 or #1844.
Installation Notes: Use 12-bolt intake gasket set
Edelbrock #7220 recommended. Manifold height: A-5.31",
B-6.19"; Carb pad height: 5.75" (see pages 81-82).
Port exit dimensions: 1.07" x 1.88".
RPM Air-Gap 351W #75814 with EnduraShine Finish

CRATE ENGINES

EFI

Designed for 1969 and later 351 Windsor Ford V8 high-performance engines with Edelbrock Performer RPM
cylinder heads, modified OEM cylinder heads or equivalent. The dual-plane design offers good throttle
response with excellent top-end power for the street. Includes bosses for rear water crossover. Will fit
1964-1/2 to 1970 Mustangs. Will not fit under stock hood of 1974-78 or 1979-95 Mustangs. Aftermarket
4-bbl carbs are not compatible with Ford Auto Overdrive Transmission (AOD) unless used with Lokar
bracket SRK-4000, for more info call (865) 966-2269 or go to www.lokar.com.
Satin
Polished
Performer RPM 351W (non-EGR) ll ........................................................................#7181 ...................#71811

RPM AIR-GAP 351W (1500-6500 RPM)

TORKER II 351W (2500-6500 RPM)

WATER PUMPS

Designed for 1969 and later 351 Windsor Ford V8 high-performance engines with Edelbrock heads,
OEM 12- or 16-bolt heads or equivalent. Will not fit Boss 351 Cleveland. Manifold not equipped with EGR.
Edelbrock carbs will work with Ford automatic overdrive trans (AOD) when used with Lokar bracket
SRK-4000, for more info call (865) 966-2269 or go to www.lokar.com.
Torker II 351W (non-EGR) l .......................................................................................................................#5081

NITROUS

ACCESSORIES

Torker II 351W #5081

Carburetor Recommendations: Edelbrock Thunder Series AVS or Performer Series carb, 600-800 cfm (see pages 13-15),
for auto. trans. use our #1483 & #1491 or #1844. Installation Notes: Use 12-bolt intake gasket set Edelbrock #7220
recommended. For van installations use OEM Ford van intake gasket set; will fit early 16-bolt head with Ford 16-bolt
intake gasket set. 1" open carburetor spacer, our #8710, is recommended when hood clearance permits. Manifold
height: A-3.55", B-4.75", same as stock; Carb pad height: 4.15" (see pages 81-82). Port exit dimensions: 1.02" x 1.82".

RPM AIR-GAP DUAL-QUAD 351W (1500-6500 RPM)

FUEL PUMPS
SPORTSWEAR
INDEX

S/B FORD

PERFORMER RPM 351W (1500-6500 RPM)

CAMSHAFT & VALVETRAIN

CYLINDER HEADS GASKETS MANIFOLDS

MANIFOLDS

RPM Air-Gap Dual-Quad #7585

67

Designed for 351W small-block Fords, these intakes offer performance improvements in the 1500-6500
rpm range. The large runners feature our unique Air-Gap design that separates the runners from the
hot engine valley for a cooler, denser charge and more horsepower. Includes bosses for rear water
crossover. Manifold and carb kits on page 135.
RPM Air-Gap Dual-Quad (non-EGR) l .....................................................................................................#7585
RPM Air-Gap Dual-Quad with EnduraShine Finish (non-EGR) l .......................................................#75854
Carburetor Recommendations: Edelbrock Thunder Series AVS #1803 and #1804, 500 cfm (see pages 13-15). Installation Notes:
Use 12-bolt intake gasket set Edelbrock #7220 recommended. For van installations use OEM Ford van intake gasket set.
Manifold height: A-4.93", B-5.56"; Carb pad height: 5.37" (see pages 81-82). Port exit dimensions: 1.05" x 1.89".

WWW.EDELBROCK.COM

CARBURETORS

S/B FORD RACE

MANIFOLDS

Designed for competition 351 Windsor Ford V8's from 1969 and later with the following heads:
Edelbrock Performer RPM heads #60259, Victor Jr. heads #77169, Victor heads #77219 or similar heads.
Two versions available: #2980 fits SVO blocks with a 9.2" deck height and #2981 fits standard 351W blocks
with a 9.5" deck height. Ideal for both oval track and drag racing engines operating between 3500 and
7500 rpm. Runners have a 2.70 square-inch cross sectional area.
Victor Jr. 351W (9.2" deck) l......................................................................................................................#2980
Victor Jr. 351W (9.5" deck) l......................................................................................................................#2981

Victor Jr. 351W #2980

Carburetor Recommendations: Any size or type of carburetor class allows. Installation Notes: Recommended intake
gasket: Edelbrock #7220 or Fel-Pro #1262. Manifold height: #2980 A-5.59", B-5.59"; #2981 A-5.75", B-5.75", (see pages 81-82).

SUPER VICTOR 351W (4500-8500 RPM)

Super Victor 351W #2924

Throttle Body Recommendations: #38783 4150 style 4V; or use #3849 EFI elbow and Ford style single 90mm throttle body #3818.
Carburetor Recommendations: Any size or type of carburetor class allows. Installation Notes: Recommended intake gasket:
Fel-Pro #1262 or #1262R. MSD distributor #8578 must be used to clear the front water crossover. Manifold height: A-6.25", B-6.25".

MATCHING EDELBROCK PARTS FOR S/B FORD

SUPER VICTOR 9.2 (4500-8500 RPM)

Carburetor Recommendations: Any size or type of carburetor class allows. Installation Notes: Recommended intake
gasket: Fel-Pro #1262 or #1262R. Manifold height: A-5.95", B-5.95", (see pages 81-82).

SPORTSWEAR

68

INDEX

Super Victor 9.2 #2929

FUEL PUMPS

Designed for high-rpm, large displacement and competition 351-Windsor Fords, the Super Victor 9.2 is for
engines with a 9.2" deck height. Ideal for drag racing or oval track engines operating from 4500 to 8500 rpm,
this single-plane intake is engineered for square-bore carbs and includes rear cooling and nitrous bosses.
Runners have a 3.10 square-inch cross sectional area. Carb pad is 0.34" taller than Edelbrock Victor Jr.
#2980. Match this race-winning manifold with Edelbrock Victor heads #77219 or Victor Jr. heads #77169.
Super Victor 9.2 (9.2" deck) l.....................................................................................................................#2929

NITROUS

Carburetor Recommendations: Any size or type of carburetor class allows. Installation Notes: Recommended intake
gasket: Fel-Pro #1262 or #1262R. Manifold height: A-6.97", B-6.97", (see pages 81-82 ).

ACCESSORIES

Glidden Victor 351W #2828

WATER PUMPS

Developed in conjunction with noted Ford drag racer Billy Glidden, this manifold is a larger version of
our popular Super Victor 351W. Featuring a 4500 series carb pad, it is intended for high rpm and large
displacement Windsor headed small-block Fords with a 9.5" deck height. The runner area has been
enlarged to 3.6 square inches and the plenum has been increased to produce more high rpm power.
To maintain optimum runner shape and location, the front water cross-over has been eliminated, but
water fittings have been provided on the intake flange for external plumbing of a thermostat if desired.
The carburetor pad height on this manifold is only 0.250" taller than the 2924, making it ideal for single-carb
all-out drag racing vehicles.
Glidden Victor 351W for 4500 Series Carb (9.5" deck) l ......................................................................#2828

CRATE ENGINES

GLIDDEN VICTOR 351W (5000-9000 RPM)

EFI

Edelbrock manifolds
are manufactured
in the USA for
unsurpassed quality.

SUPERCHARGERS

Super Victor
351W EFI #29245

Description
Page No.
Performer RPM Camshaft ................................................................................................................................... 122
Performer RPM Cylinder Heads ........................................................................................................................ 103
Roller Timing Set................................................................................................................................................... 127
Cam Gear Drive ..................................................................................................................................................... 126
Valve Springs..................................................................................................................................................117-118
Retainers .........................................................................................................................................................117-118
Manifold Bolts ......................................................................................................................................................... 79
Fuel Pump........................................................................................................................................................202-205
Valve Covers ...................................................................................................................................................187-191

POWER PACKAGES KITS

Designed for high rpm or large displacement competition 351 Windsor Ford V8's with a deck height
of 9.5" which are used in drag racing or oval track engines operating between 4500 and 8500 rpm.
Super Victor #2924 can be used with ported factory cast iron heads, however aftermarket aluminum heads
are recommended, such as Edelbrock Victor Jr. #77169 or Victor heads #77219 for ultra high-horsepower.
Runners have a 3.20 square-inch cross sectional area.
Super Victor 351W (9.5" deck) l ...............................................................................................................#2924
Super Victor EFI for 351W (9.5" deck) l..................................................................................................#29245
Ford Fuel Rail Kit (standard injectors with stands) .................................................................................#3620

CAMSHAFT & VALVETRAIN

Manifolds #2980 and #2981

are approved for IMCA
sanctioned racing events,
see rulebook for details

MANIFOLDS GASKETS CYLINDER HEADS

VICTOR JR. 351W (3500-7500 RPM)

EMISSIONS GUIDE

l 50-STATE LEGAL l RACING ONLY l PRE-POLLUTION CONTROLLED VEHICLES l STOCK REPLACEMENT l ENGINE SWAP
PLEASE REFER TO PAGE 212 FOR MORE INFORMATION REGARDING THE EMISSIONS GUIDE.

CARBURETORS
CYLINDER HEADS GASKETS MANIFOLDS

MANIFOLDS

S/B FORD RACE

GLIDDEN VICTOR 351Y 4500 SERIES (5000-8500+ RPM)

Designed in conjunction with noted Ford drag racer Billy Glidden for raised port aluminum C3 SVO
(Yates) cylinder heads, #2863 fits 9.2" deck heights. Victor Glidden 351Y #2863 has 3.2 square-inch
runners. Both are perfect for all-out nitrous-assisted drag race applications. Carb mount flange and
plenum are machined for 4500 Series carbs and require port matching and blending prior to use.
Victor 351Y for 9.2" with C3 Heads and 4500 Series Carb (non-EGR) l ............................................#2863
Valley Cover for Victor II or Victor SC-1 Pro-Port Raw Heads on a 9.2" Deck l ...........................#2832
Spacer Plate & Bolt Kit for #2865 on 9.5" Deck l .................................................................................#2864

Carburetor Recommendations: Use appropriate 4500 Series racing carb. Installations Notes: Recommended intake gasket:
Fel-Pro #1253-3. Manifold height: #2863 A-7.16", B-7.16", (see pages 81-82).

CAMSHAFT & VALVETRAIN

Glidden Victor 351Y #2863

Spacer Plate Kit #2864

Designed in conjunction with noted Ford drag racer Billy Glidden for Ford SC-1 and Edelbrock Victor Pro-Port
cylinder heads #770769, #2860 is intended for 400 c.i. and up high output race engines with a 9.5" deck height.
The runner dividers are pulled back and the end runners are shortened to increase plenum size for more
peak horsepower. It is the ideal manifold for dirt track or drag racing with Edelbrock Glidden Victor II
Pro-Port heads #773169 in classes requiring in-line valve heads and a standard-flange carburetor.
Glidden Victor for 9.5" with SC-1 Heads and 4150 Series Carb (spider only) l...............................#2860
Valley Cover for Victor II or Victor SC-1 Pro-Port Raw Heads on a 9.5" Deck l ...........................#2833
Victor SC-1 4150 Series #2860

Carburetor Recommendations: Use appropriate 4150 Series racing carburetor. Installations Notes: Recommended
intake gasket: Fel-Pro #1253-3. Manifold height: A-7.47", B-7.47", (see pages 81-82)

GLIDDEN VICTOR SC-1 4500 SERIES (5000-8500+ RPM)

EFI

SUPERCHARGERS

KITS POWER PACKAGES

GLIDDEN VICTOR SC-1 4150 SERIES (5000-8500+ RPM)

WATER PUMPS

CRATE ENGINES

Valley Plate #2833

This manifold is another design from the race program of Billy Glidden for 9.5" deck height Windsor Fords.
Designed for Ford SC-1 and Edelbrock Victor Pro-Port cylinder heads, #2868 is intended for 400 c.i. and up
high output drag race engines typically using some additional power adder. It is influenced by current
trends in Edelbrocks NASCAR manifolds, but the runner dividers are pulled back and the end runners are
shortened to increase plenum size for more peak horsepower with a larger carburetor. It is the ideal
manifold for drag racing with Edelbrock Glidden Victor SC-1 Pro-Port Raw heads #770769 and #773169
Glidden Victor II in classes without restrictions on heads or carb selection.
Glidden Victor for 9.5" with SC-1 Heads and 4500 Series Carb (spider only) l...............................#2868
Valley Cover for Victor II or Victor SC-1 Pro-Port Raw Heads on a 9.5" Deck l ...........................#2833

ACCESSORIES

Carburetor Recommendations: Use appropriate 4500 Series racing carburetor. Installations Notes: Recommended
intake gasket: Fel-Pro #1253-3. Manifold height: A-7.47", B-7.47", (see pages 81-82).

INDEX

SPORTSWEAR

FUEL PUMPS

NITROUS

Glidden Victor SC-1 #2868

John Urist, 9-time NMRA Street

Outlaw Champion uses Edelbrock
manifold #2868 matched with
Edelbrock cylinder heads #770769 for
a proven race-winning combination.
John also uses Russell ProClassic
hose and Crimp-On swivel hose ends
to handle engine plumbing.

Sand cast aluminum valve covers

#4267 for SC-1 cylinder heads

69

Glidden Victor SC-1 Pro-Port

cylinder heads #770769

WWW.EDELBROCK.COM

CARBURETORS

S/B FORD

MANIFOLDS

PERFORMER 351-4V & 351-2V (IDLE-5500 RPM)

Performer 351-4V is designed for street 351C and Boss 351 Fords that came stock with 4V carb and heads.
Performer 351-2V is designed for street 351C and accepts 4V carb, however its designed to improve the
performance of engines that came stock with 2V carb and heads. Neither manifold will fit Boss 302 or
accept stock Motorcraft spread-bore carb. End-seal flange width measures 6-31/32".
Performer 351-4V (non-EGR) l ..................................................................................................................#2665
Performer 351-2V (non-EGR) l ..................................................................................................................#2750
Performer 351-4V #2665

PERFORMER RPM E-BOSS 302 (1500-6500 RPM)

Carburetor Recommendations: Edelbrock Thunder Series AVS or Performer Series carb, 600-800 cfm (see pages 13-15).
Installation Notes: Recommended intake gasket: Edelbrock #7265. Manifold height: A-4.42", B-5.70"; Carb pad height:
5.06" (see pages 81-82). Port exit dimensions: 1.42" x 2.07".

RPM Air-Gap 351-C #7564

Designed for street 351 c.i.d. Ford V8's with 4V Cleveland or Boss 351 heads. Will not fit under hood of Ford
Pantera with stock air cleaner. Will not fit 351 with 2V heads.
Torker 351 (non-EGR) l ..............................................................................................................................#2760

EMISSIONS GUIDE

PLEASE REFER TO PAGE 212 FOR MORE INFORMATION REGARDING THE EMISSIONS GUIDE.

70

INDEX

l 50-STATE LEGAL l RACING ONLY l PRE-POLLUTION CONTROLLED VEHICLES l STOCK REPLACEMENT l ENGINE SWAP

SPORTSWEAR

Torker 351 #2760

Carburetor Recommendations: Edelbrock Thunder Series AVS or Performer Series carb, 650-800 cfm (see pages 13-15),
for automatic transmission use our #1483 & #1493 or #1844. Installation Notes: Recommended intake gasket: Fel-Pro
#1228. Manifold height.: A-4.90", B-5.90"; Port exit dimensions: 1.60" x 2.45". Carb pad height: 5.40" (see pages 81-82).

FUEL PUMPS

TORKER 351 (3000-7000 RPM)

NITROUS

Carburetor Recommendations: Edelbrock Thunder Series AVS or Performer Series carb, 600-800 cfm (see pages 13-15),
for automatic transmission use our #1483 & #1493 or #1844. Installation Notes: Requires #8565 bolt kit (see page 79).
Recommended intake gasket: Edelbrock #7265. Manifold height: A-4.48", B-5.56; Carb pad height: 5.02" (see pages 81-82).
Port exit dimensions: 1.42" x 2.04". Camshaft Recommendations: Performer RPM #7168. See page 122 for specs.

ACCESSORIES

The Edelbrock Air-Gap design utilizes the same race-winning technology thats been used on Edelbrocks
Victor Series competition intakes for many decades. Designed to improve performance on the street or
racetrack, the RPM Air-Gap 351 Cleveland manifold features an open space that separates the runners
from the hot engine oil resulting in a cooler, denser charge. The RPM Air-Gap manifold for 351 Cleveland
engines is designed to complement Edelbrocks 351C Performer RPM cylinder heads #61609, #61629,
#61625 and also works well with 4V and 2V cast iron Cleveland heads.
RPM Air-Gap 351C (non-EGR) l ................................................................................................................#7564
RPM Air-Gap 351C polished finish (non-EGR) l....................................................................................#75641

WATER PUMPS

RPM AIR-GAP 351C (1500-6500 RPM)

CRATE ENGINES

Build a mock Boss 351 engine with a standard 351W block and Edelbrock Performer RPM Cleveland
heads #61699 using the Performer RPM E-Boss 351 manifold #7183. For both high-performance street and
competition, the dual-plane design makes outstanding power from 1500 to 6500 rpm and the Cleveland port
layout and intake bolt hole pattern fit both 2V and 4V heads. It features 9.5" deck height, Windsor end rails,
water neck and distributor clearance, front and rear water bosses with a standard square bore carburetor
pad. Edelbrock carbs will work with Ford automatic overdrive trans (AOD) when used with Lokar bracket
SRK-4000, for more info call (865) 966-2269 or go to www.lokar.com.
Performer RPM E-Boss 351 (non-EGR) ll.............................................................................................#7183

EFI

Performer RPM E-Boss 351 #7183

PERFORMER RPM E-BOSS 351 (1500-6500 RPM)

SUPERCHARGERS

Manifold #7183 is approved for

IMCA sanctioned racing events,
see rulebook for details

Carburetor Recommendations: Edelbrock Thunder Series AVS or Performer Series carb, 600-800 cfm (see pages 13-15).
Installation Notes: Recommended intake gasket: Edelbrock #7265. Manifold height: A-4.42", B-5.70"; Carb pad height: 5.06"
(see pages 81-82). Port exit dimensions: 1.42" x 2.07".

POWER PACKAGES KITS

Performer RPM
E-Boss 302 #7129

With the Performer RPM E-Boss 302 manifold #7129, you can build a mock Boss engine by using a standard
302 block and Edelbrock Performer RPM Cleveland cylinder heads #61699. For high-performance street and
competition, our dual-plane design makes outstanding power from 1500 to 6500 rpm. The Cleveland port
layout and intake bolt hole pattern fit both 2V and 4V heads. Features include 8.2" deck height, Windsor
end rails, water neck and distributor clearance plus front and rear water bosses. Match with an Edelbrock
Performer or Thunder Series AVS carburetor. Edelbrock carbs will work with Ford automatic overdrive trans
(AOD) when used with Lokar bracket SRK-4000, for more info call (865) 966-2269 or go to www.lokar.com.
Performer RPM E-Boss 302 Ford Manifold l.........................................................................................#7129

CAMSHAFT & VALVETRAIN

Carburetor Recommendations: Edelbrock Thunder Series AVS or Performer Series carb, 600-800 cfm (see pages 13-15),
for automatic transmission use our #1483 & #1493 or #1844. Installation Notes: Choke block-off plate included with
Performer 351-2V #2750. Recommended intake gasket: Fel-Pro #1228 (for #2665), Fel-Pro #1240 or Edelbrock #7265 (2V) (for
#2750). Manifold height: A-3.50", B-4.30; Carb pad height: 3.90" (see pages 81-82). Port exit dimensions: #2665 - 1.37" x 2.15";
#2750 - 1.30" x 1.86".

MANIFOLDS GASKETS CYLINDER HEADS

FORD 351 CLEVELAND V8

CARBURETORS
CYLINDER HEADS GASKETS MANIFOLDS

MANIFOLDS

FORD 351M/400 V8

PERFORMER 400 NON-EGR (IDLE-5500 RPM)

Designed for 400 c.i.d. Ford V8's produced from 1971 to 1982 with 2V Cleveland heads and 351M V8's
produced from 1975 to 1982. Will not fit 1974 and earlier 351C V8's. Valley width measures 8-17/32".
Performer 400 (non-EGR) l ........................................................................................................................#2171
Performer 400 with Black Powder Coated Finish (non-EGR) l..........................................................#21713
Carburetor Recommendations: Edelbrock Thunder Series AVS or Performer Series carb, 600-650 cfm (see pages 13-15),
for automatic transmission use our #1483 & #1493 or #1844. Installation Notes: Carburetor flange plate #2732 is included.
Recommended intake gasket: Fel-Pro #MS96020. Manifold height: A-3.60", B-4.75"; Carb pad height: 4.17" (see pages
81-82). Port exit dimensions: 1.24" x 1.70". Camshaft Recommendations: Performer Plus #2172. See page 121 for specs.

CAMSHAFT & VALVETRAIN

Performer 400 #2171

PERFORMER 400 EGR (IDLE-5500 RPM)

Designed for 351M/400 Fords in one of the three following configurations: 1) OEM 2V carb and EGR system
with supplied 2V EGR spacer; 2) 4V EGR system with either an Edelbrock #8053 4V EGR spacer, or an
Edelbrock #8017 and Ford #E4ZZ9A-589E 4V EGR spacer; 3) For off-highway use, non-EGR 4V system with
an Edelbrock #8714 4V spacer.
Performer 400 EGR (2V EGR or 4V off-road)l ..........................................................................................#3771

KITS POWER PACKAGES

Carburetor Recommendations: OEM 2-bbl. Off-highway, non-EGR 4V: Edelbrock Thunder Series AVS or Performer Series
carb, 600-650 cfm (see pages 13-15), for automatic transmission use our #1483 & #1493 or #1844. Installation Notes: For
non-EGR, off-road applications, use #8714 4V spacer. Intake gasket: Fel-Pro #MS96020. Replacement EGR plate gaskets:
#3896 & #3897. Manifold height: A-3.60", B-4.75" (without EGR plates installed); Carb pad height: 4.17" (see pages 81-82).
Port exit dimensions: 1.16" x 1.66".
Performer 400
EGR #3771

FORD 4.6L V8

SUPERCHARGERS

VICTOR JR. FORD 4.6L SOHC (3500-7500 RPM)

CRATE ENGINES

EFI

Following in the footsteps of our Victor Jr. LS1 intake, our Victor Jr. intake for Ford 4.6L SOHC Modular
engines allows the customer to take any 1999-2004 SOHC Modular 4.6L engine and convert it for use with
a carburetor. #2839 includes an electronic Timing Control Module, which picks up MAP, Crank Position,
and Cam Position, and drives the stock Coil-on-Plug system. The Timing Control Module comes loaded
with a basic timing curve and rev limit, both can be easily modified using a laptop and the included
Pro-Data software. Timing control module available separately. Not intended for or as a stock
replacement intake manifold.
Victor Jr. Carbureted Manifold for 4.6L Ford SOHC with Electronics l ..........................................#2839
Victor Jr. Carbureted Manifold for 4.6L Ford SOHC without Electronics l .....................................#2838
Victor Jr. Ford 4.6L SOHC EFI Manifold Only l .....................................................................................#28385
Fuel Rail Kit for #28385 ................................................................................................................................#3639

WATER PUMPS

Victor Jr. Ford 4.6L SOHC #2838

Throttle Body Recommendations: #38783 4150 style 4V; or #3848 competition EFI elbow and #3818 90mm throttle body.
Installation Notes: Recommended intake gasket: OEM factory gaskets. Manifold height: A-4.75", B-4.75", 0 carb angle,
(see pages 81-82) Port exit dimensions: 1.42" x 1.72".

ACCESSORIES

FORD 5.0L COYOTE V8

VICTOR II 5.0L (1500-7500 RPM)

FUEL PUMPS

NITROUS

This all new intake manifold for the 2011-15 Ford Coyote 5.0L V8 engine combines long tapered, crossover
style runners with a large plenum for outstanding performance. The cast aluminum construction makes
it ideal for nitrous, supercharged and turbo applications. This manifold also includes provisions for all
emissions equipment and reuses the stock fuel rail. The Victor II also features nitrous bosses for adding
a direct port system for competition applications. The slightly lower design allows it to fit all 2011-14 and
2015 Mustang stock hoods and strut tower braces. Engine dyno testing resulted in 27 more ft-lbs. of
torque over a common aftermarket plastic upgrade intake manifold and an additional 16 horsepower
over a stock manifold.
Victor II 5.0L 4V Manifold l.......................................................................................................................#7180
Throttle Body Recommendations: Stock 80mm throttle body or Ford M-9926-M5090 90mm Mustang throttle body.
Installation Notes: Recommended intake gasket: OEM factory gaskets. Accepts either 2011-14 style or 2015 style
intake gaskets seals. Manifold height: A-7.92", B-8.02", (see pages 81-82) Port exit dimensions: 2.24" x 1.30".

SPORTSWEAR
INDEX

S/B AND MODULAR

71

WWW.EDELBROCK.COM

CARBURETORS

B/B FORD

MANIFOLDS

PERFORMER 390 (IDLE-5500 RPM)

Designed for street 332-352-360-390-406-410-427-428 c.i.d. Ford V8's with medium- or low-rise cylinder
heads. Manifold not equipped with EGR; will not accept stock Motorcraft spread-bore carburetor or fit
heavy-duty 361 c.i.d. and 391 c.i.d. Ford truck V8's.
Satin
Black
Performer 390 (non-EGR) ll ......................................................................................#2105 ...................#21053
Performer 390 #21053

Carburetor Recommendations: Edelbrock Thunder Series AVS or Performer Series carb, 600-800 cfm (see pages 13-15),
for auto. trans. use our #1483 or #1844. Installation Notes: Recommended intake gasket: Edelbrock #7224 or Fel-Pro
#1247. Manifold height: A-4.35", B-5.50" (same as stock); Carb pad height: 4.92" (see pages 81-82). Port exit dimensions:
1.06" x 1.75". Camshaft Recommendations: Performer Plus #2106. See page 121 for specs.

Performer RPM FE #71054 with EnduraShine Finish

Designed for high-performance street 390-406-410-427-428 c.i.d. Ford FE V8's with standard 390-428 c.i.d.,
427 low/medium-rise or Edelbrock Performer RPM FE heads. The dual-plane constant cross-sectional area
design builds low and mid-range acceleration while optimized runner paths make exceptional top-end
horsepower. Has provision for adding the PCV or breather flange at rear. No exhaust crossover passage.
Also available as a complete manifold and carb kit, see page 134.
Satin
Black
EnduraShine
Performer RPM FE (non-EGR) ll ................................................. #7105 ....................#71053 ..................#71054

Performer RPM Intake #7505

RPM heads #60069
Thunder Series AVS Carb #1803
and Carb #1804
Camshaft #7106

Carburetor Recommendations: Edelbrock Thunder Series AVS #1803 and #1804, 500 cfm (see page 13-15).
Installation Notes: Recommended intake gasket: Edelbrock #7224. Manifold height: A-4.85", B-5.70"; Carb pad
height: 5.28", (see pages 81-82). Port exit dimensions: 1.05" x 1.90".

PLEASE REFER TO PAGE 212 FOR MORE INFORMATION REGARDING THE EMISSIONS GUIDE.

72

INDEX

l 50-STATE LEGAL l RACING ONLY l PRE-POLLUTION CONTROLLED VEHICLES l STOCK REPLACEMENT l ENGINE SWAP

SPORTSWEAR

EMISSIONS GUIDE

FUEL PUMPS

Victor FE #29365

Carburetor Recommendations: Use any size or type carburetor class allows. Throttle Body Recommendations: See page 166.
Installation Notes: Recommended intake gasket: Fel-Pro #1247. Manifold height: A-6.49", B-6.49" , (see pages 81-82).
Note: Performer Series & Thunder Series AVS carbs will work with Ford automatic overdrive trans (AOD) when used
with Lokar bracket SRK-4000. For more info call (865) 966-2269 or go to www.lokar.com.

NITROUS

Designed for high performance 390-406-410-427-428 c.i.d. Ford FE engines. The single-plane design
provides race-winning power for many types of competition. Carb flange height is equal to the Ford
high-riser manifold #C4AE-9424-G to fit under 427 Cobra hoods. Runners have plenty of material for
port matching to low- or medium-riser style heads. Machined rear breather flange is included with
unmachined nitrous bosses and front oil fill tube boss. Will not fit 427 high-riser and tunnel-port heads.
Match with our FE heads.
Victor FE (for square-bore carbs) l ..........................................................................................................#2936
Victor FE (for 4500 series carbs) l ............................................................................................................#2937
Victor FE EFI (for standard square-bore throttle bodies based on #2936) l ....................................#29365
Ford FE Fuel Rail Kit (standard injectors with stands) ............................................................................#3632

ACCESSORIES

VICTOR FE (4000-8000 RPM)

WATER PUMPS

390 c.i.d. FE Ford

CRATE ENGINES

RPM Air-Gap Dual-Quad FE #7505

Give your FE powered street rod dual-quad power and nostalgic looks with the Edelbrock RPM
Air-Gap Dual-Quad intake manifold. Designed for 1960-later high-performance street 390-406-410-427428 c.i.d. Ford FE engines with low/medium rise or Edelbrock Performer RPM FE heads #60059 or #60069.
The manifold carb pad is setup to fit Edelbrock carburetors only, will not work with other square flange
carburetors. In Dyno tests on a 390 with Performer RPM heads #60069, Performer RPM camshaft #7106
Thunder Series AVS #1803 and #1804 carburetors, it made 452 hp and 428 ft-lbs. torque. Will not fit 427
Ford Hi-Riser and Tunnel Port engines. Has machined boss for a breather flange at rear. Also available in
complete manifold and carb kits, see page 135.
Satin
EnduraShine
RPM Air-Gap Dual-Quad FE (non-EGR) ll..............................................................#7505 ...................#75054

EFI

RPM AIR-GAP DUAL-QUAD FE (1500-6500 RPM)

SUPERCHARGERS

Carburetor Recommendations: Edelbrock Thunder Series AVS or Performer Series carb, 650-800 cfm (see pages 13-15),
for automatic transmission use our #1483 or #1844. Installation Notes: Recommended intake gasket: Edelbrock #7224.
Manifold height: A-4.89", B-6.04"; Carb pad height: 5.46", (see pages 81-82). Port exit dimensions: 1.16" x 1.97". Camshaft
Recommendations: Performer RPM #7106. See page 122 for specs.

POWER PACKAGES KITS

PERFORMER RPM FE (1500-6500 RPM)

CAMSHAFT & VALVETRAIN

Match your FE intake and cylinder

heads with our Elite Series II FE
valve covers, see page 188.

MANIFOLDS GASKETS CYLINDER HEADS

FORD 332-428 V8

CARBURETORS
CYLINDER HEADS GASKETS MANIFOLDS

MANIFOLDS

FORD 429/460 V8

PERFORMER 460 (IDLE-5500 RPM)

Designed for street 429/460 c.i.d. Ford V8's. Will not fit 429 Cobra-Jets or 1966-68 462 Lincolns and will not
accept stock spread-bore carb. Will not fit 1988 and later models. #3766 cannot use #8714 to block-off
EGR. Must use stock OE EGR plate.
Satin
Black
Performer 460 (non-EGR) l ..........................................................................................#2166 ...................#21663
Performer 460 (EGR) l ..................................................................................................#3766 ......................N/A

CAMSHAFT & VALVETRAIN

Performer 460 #2166

Carburetor Recommendations: #2166: Edelbrock Thunder Series AVS or Performer Series carb, 650-800 cfm
(see pages 13-15), for automatic transmission use our #1483 and #1495 or #1844. #3766: OEM square-bore carb.
Installation Notes: Recommended intake gasket: Edelbrock #7223 or Fel-Pro #MS96018. Replacement EGR plate
gaskets: #3898. Manifold height: A-3.75", B-4.49" same as stock; Carb pad height: 4.12", (see pages 81-82). Port exit
dimensions: 1.65" x 1.96".
Camshaft Recommendations: Performer Plus #2167. See page 121 for specs.

PERFORMER RPM 460 (1500-6500 RPM)

KITS POWER PACKAGES

Performer RPM 460 #7166

Designed for high-performance street 429/460 Ford V8's with standard or Cobra-Jet cylinder heads.
Latest technology in dual-plane design results in excellent low- and mid-range torque and outstanding
horsepower on appropriately equipped engines. Will accept square-bore or spread-bore carburetors.
Will not fit 1988 and later models. Note: Early Cobra-Jets came with Quadrajets.
Performer RPM 460 (non-EGR) l ..............................................................................................................#7166

SUPERCHARGERS

Carburetor Recommendations: Edelbrock Thunder Series AVS or Performer Series carb, 650-800 cfm (see pages 13-15),
for auto. trans. use our #1483 & #1495 or #1844. Installation Notes: Recommended intake gasket: Edelbrock #7223 or
Fel-Pro #1230/#1231. Manifold height: A-4.81", B-6.15"; Carb pad height: 5.48", (see pages 81-82). Port exit dimensions:
1.76" x 2.06".
Camshaft Recommendations: Performer RPM #7167. See page 122 for specs.

EFI

RPM AIR-GAP 460 (1500-6500 RPM)

WATER PUMPS

CRATE ENGINES

Designed for street and high performance 429/460+ c.i.d. Ford V8's with standard or Cobra Jet heads,
the RPM Air-Gap 460 incorporates the same race-winning design thats been used on our Victor Series
competition intakes for decades. The Air-Gap design features an open air space that separates the
runners from the hot engine oil resulting in a cooler, denser charge for more power. It also features a
larger cross sectional area (3.3 square inches) than the Performer RPM 460 manifold #7166 for even
more power in high performance and large displacement engines. The carb mount flange accepts both
square-bore and spread-bore carbs for Cobra Jet applications. Will not fit 1988 and later models.
Note: Early Cobra Jets came with Quadrajets.
RPM Air-Gap 460 (non-EGR) l ...................................................................................................................#7566

ACCESSORIES

RPM Air-Gap
460 #7566

Carburetor Recommendations: Edelbrock Thunder Series AVS or Performer Series carb, 750-800 cfm (see pages 13-15),
for automatic transmission use our #1483 & #1495 or #1844. Installation Notes: Recommended int. gasket: Edelbrock
#7223 or Fel-Pro #1230/#1231. Manifold height: A-4.81", B-6.15"; Carb pad height: 5.48", (see pages 81-82). Port exit
dimensions: 1.76" x 2.06".

NITROUS

TORKER II 460 (2500-6500 RPM)

FUEL PUMPS

Designed for 429/460 c.i.d. Ford V8's used in marine and high performance applications. Manifold not
equipped with EGR. Will fit 429 Cobra-Jets. Manifold will not accept stock Motorcraft spread-bore
carburetor. Will not fit 1988 and later models.
Torker II 460 (non-EGR) l ...........................................................................................................................#5066

Torker II 460 #5066

SPORTSWEAR
INDEX

B/B FORD STREET

73

Carburetor Recommendations: Edelbrock Thunder Series AVS or Performer Series carb, 750-800 cfm (see pages 13-15),
for automatic transmission use our #1483 & #1495 or #1844. Installation Notes: Intake gasket: Edelbrock #7223 or Fel-Pro
#1230/#1231. Manifold ht.: A-3.50", B-4.25"; Carb pad height: 3.87", (see pages 81-82). Port exit dimensions: 1.75" x 2.10".
Camshaft Recommendations: Performer RPM #7167. See page 122 for specs.

WWW.EDELBROCK.COM

CARBURETORS

B/B FORD RACE AND HOLDEN

MANIFOLDS

Victor 460 EFI #50665

This EFI intake manifold is based on our popular Torker II #5066 for 429/460 c.i.d. Ford V8 applications.
It has cast and vertically machined fuel injector bosses for proper fuel injector placement. It is also
drilled to accept Edelbrock Fuel Rail kit #3645 and support brackets, for easy attachment. Designed
to accept standard flange throttle bodies. This manifold not equipped with EGR. Will not fit 1988-later
models or 429 Cobra-Jets.
Victor Ford 460 EFI (non-EGR) l ................................................................................................................#50665
Victor Ford Fuel Rail Kit (Compatible with Standard and Pico injectors) ............................................#3645
Throttle Body Recommendations: #38783, 4150 style 4V. Installation Notes: Intake gasket: Edelbrock #7223 or
Fel-Pro #1230/#1231. Manifold height: A-3.50",B-4.25"; throttle body pad height: 3.87", (see pages 81-82). Port exit
dimensions: 1.75" x 2.10".

Carburetor Recommendations: Any carburetor class allows. Installation Notes: Recommended intake gasket: Fel-Pro
#1231. Manifold height: A-6.30", B-6.30", (see pages 81-82).

HOLDEN

PERFORMER (IDLE-5500 RPM)

PLEASE REFER TO PAGE 212 FOR MORE INFORMATION REGARDING THE EMISSIONS GUIDE.

74

INDEX

l 50-STATE LEGAL l RACING ONLY l PRE-POLLUTION CONTROLLED VEHICLES l STOCK REPLACEMENT l ENGINE SWAP

SPORTSWEAR

EMISSIONS GUIDE

Carburetor Recommendations: OEM 4-bbl. Edelbrock Thunder Series AVS or Performer Series carb, 600-750 cfm.
Installation Notes: Do not use high performance or competition type intake gaskets for street application. Due
to material deterioration under street driving conditions, internal leakage of both vacuum and oil may occur.
Recommended intake gasket: stock gasket set or equivalent. Manifold height: A-4.80, B-5.82; Carb pad height: 5.31.
Port exit dimensions: 1.16 x 2.00.

FUEL PUMPS

Designed for street and high performance 308-383 c.i.d. Holden V8 engines that utilize the 1988-98 Holden
VN cylinder heads. This RPM Air-Gap manifold is a dual-plane design that is tuned for excellent throttle
response from 1500 to 6500 rpm. This manifold has been designed to fit both stock 1988-1998 EFI style
heads and the Edelbrock Holden VN RPM cylinder heads.
RPM Air-Gap Holden l ..............................................................................................................................#7594
RPM Air-Gap Holden EFI l ........................................................................................................................#75945

NITROUS

RPM AIR-GAP (1500-6500 RPM)

ACCESSORIES

Carburetor Recommendations: OEM 4-bbl. Edelbrock Thunder Series AVS or Performer Series carb, 600-650 cfm.
Installation Notes: Do not use competition style intake gaskets for this street manifold. Due to material deterioration
over time, internal leakage of vacuum, oil, and coolant may occur. Recommended intake gasket: OEM equivalent.
Manifold height: A-2.95, B-4.50; Carb pad height: 3.73. Port exit dimensions: 1.03 x 1.88. See pages 81-82.

WATER PUMPS

Holden Torker #2790

Designed for Holden 253-304-308 c.i.d. V8 engines with Red motor cylinder heads only (with single bolt in
center of manifold), will not fit on Blue/Black cylinder head engines. The Torker 308 intake manifold is a
single-plane design and is recommended for street high performance and race engines operating between
the 2500 to 6500 rpm range where low-end torque is not required. Accepts square-bore carbs only.
Torker 308 l .................................................................................................................................................#2790

CRATE ENGINES

TORKER 308 (2500-6500 RPM)

EFI

Carburetor Recommendations: OEM 4-bbl. Edelbrock Thunder Series AVS or Performer Series carb, 600-750 cfm.
Installation Notes: Do not use high performance or competition type intake gaskets for street application. Due
to material deterioration under street driving conditions, internal leakage of both vacuum and oil may occur.
Recommended intake gasket: stock gasket set or equivalent. Manifold height: A-3.25, B-4.67; Carb pad height: 3.96.
Port exit dimensions: 1.07 x 1.83.

SUPERCHARGERS

Holden Performer #2194

Designed for street 253-304-308 c.i.d. Holden V8 engines. This Performer intake manifold is a dual-plane
design that is tuned for excellent throttle response from idle to 5500 rpm. The Performer Holden manifold
has been designed to fit both cylinder head bolt hole patterns. Pilot holes have been drilled on each side
of the exhaust crossover for early or late model cylinder heads and will need to be drilled out depending
on application. Will not fit EFI Heads. Accepts both square-bore and spread-bore carbs. Fits Red/Blue/
Black engines. Does not have a provision for external heat crossover. Includes Edelbrock square-bore
carb adaptor plate #2732, carb gasket and carb studs.
Performer Holden l ....................................................................................................................................#2194
Performer Holden with EnduraShine finish l .......................................................................................#21944

POWER PACKAGES KITS

Victor 460 #2965 for 4500 Series Carbs

Designed for Ford 429/460 competition engines using Cobra-Jet cast iron, SVO Cobra-Jet aluminum
(M-6049-A429), or the Edelbrock 460 CJ aluminum heads. Both manifolds are ideal for drag racing
(Super Stock, Super Gas, Super Comp, Brackets, etc.), marine or any application requiring maximum
power up to 8000 rpm. Standard 429/460 cast iron heads will require port matching of the head to
fit manifold. Our 1" Cloverleaf Spacer #8718 provides maximum performance with #2965 where hood
clearance is not a problem. Port exit size at head is 1.88" x 2.16" with enough extra material to open it
up to the cast iron Cobra-Jet heads. Will not fit 1988 and later models.
Victor 460 (for square-bore carburetors) l .............................................................................................#2966
Victor 460 (for 4500 series carburetors) l................................................................................................#2965
Cloverleaf 1" Spacer (for maximum performance with #2965) l .........................................................#8718

CAMSHAFT & VALVETRAIN

VICTOR 460 (3500-8000 RPM)

MANIFOLDS GASKETS CYLINDER HEADS

VICTOR 460 EFI (3500-8000 RPM)

CARBURETORS

PERFORMER X (4500-8200 RPM)

The Performer X intake manifolds are engineered for street/strip applications where peak torque and
horsepower gains are realized between 4500-8200 rpm. The larger-than-stock plenum volume and 9" runner
length are tuned for producing peak power at high rpm. The Performer X Series manifold is ideal for allmotor and turbo applications.

HONDA/ACURA B SERIES MANIFOLDS

Performer X
#4771

IMPORTANT MEASUREMENTS

SUPERCHARGERS
EFI

HONDA/ACURA D SERIES MANIFOLDS

Performer X for 1996-00 Civic EX, D16Y8 SOHC

(match with AEM Cold Air Intake #21-512) l ...........................................................................................#4756
Performer X for 1992-95 Civic EX, D16Z6 SOHC l .................................................................................#4754

HONDA/ACURA FUEL RAILS

Fuel Rail for 1994-01 Acura Integra - Machined for Honda-Style Injector .........................................#4796
Fuel Rail for 1996-00 Honda Civics (except Si) - Machined for Honda-Style Injector ......................#4798
Fuel Rail for 1996-00 Honda Civics (except Si) - Machined for Bosch-Style Injector .......................#4799
Fuel Rail for 1992-95 Honda Civics D-Series - Machined for Bosch-Style Injector..........................#4795

VICTOR SERIES MANIFOLDS

VICTOR X (7000-10,000 RPM)
CHECKING FOR FIREWALL CLEARANCE

In front wheel drive vehicles, proper intake-tofirewall clearance is essential. Measure from
the valve cover flange back towards the firewall.
Youll need 12.5 inches of open space. This space
should extend about 6.25" to the right and 9.0" to
the left of the port centerline of the intake manifold.

WATER PUMPS

CRATE ENGINES

Performer X for 1994-01 Integra GSR B18C with Satin Finish l ........................................................#4771
Performer X for 1994-00 Honda/Acura B16A and Type R B18C5 with Satin Finish l ....................#4774

Injector Recommendations: Stock OEM injectors. Installation Notes: Recommended Edelbrock intake gasket: #15043
1994-2000 B18B motors, #15042 1994-2000 B18C1 motors, #15041 1994-2000 B16 / B18C5 motors, #15005 1992-2000 D16 motors
(The D16y7 will require some trimming of the gasket).

Optimized for maximum power from 7,000 to 10,000 RPM, the Victor X manifold is designed for turbo
and all-motor applications. Engineered for high performance, this manifold has four additional bosses
for nitrous or added fuel injectors. Match with the Edelbrock 65mm throttle body for maximum power.

HONDA/ACURA B SERIES MANIFOLDS

Satin
Polished
Victor X for Integra GSR with B18C Engine l .........................................................#4760 ...................#47601
Victor X for B16A & Type R B18C5 Engines l..........................................................#4764 ...................#47641
Victor X for 1990-93 Integra LS with B18A Engine
and 1994-01 Integra LS with B18B Engine l ............................................................#4767 ...................N/A
Throttle Body Recommendations: Use Edelbrock Throttle Body or stock (See page 166). Installation Notes:
Recommended Edelbrock intake gasket: #15043 1994-2000 B18B motors, #15042 1994-2000 B18C1 motors, #15041
1994-2000 B16 / B18C5 motors.

OLDSMOBILE 307-403 V8

ACCESSORIES

PERFORMER OLDS 350 (IDLE-5500 RPM)

NITROUS

Victor X
#4760

FUEL PUMPS
SPORTSWEAR
INDEX

HONDA/ACURA & OLDSMOBILE

HONDA/ACURA

KITS POWER PACKAGES

CAMSHAFT & VALVETRAIN

CYLINDER HEADS GASKETS MANIFOLDS

MANIFOLDS

Performer Olds 350 #2711

75

Designed for street 307-330-350-403 c.i.d. Oldsmobile V8's, 1964-85. For non-EGR, the #2711 manifold comes
with a universal pad to fit most carburetors with electric chokes. Will fit 1980-1/2 to 1985 307 c.i.d. V8's
with 5A heads (casting #3317).
Performer Olds 350 (non-EGR) l ...............................................................................................................#2711
Performer Olds 350 (EGR) l .......................................................................................................................#3711
Carburetor Recommendations: #2711: Edelbrock Thunder
Series AVS or Performer Series carb, 500-650 cfm
(see pages 13-15). #3711: OEM 4-bbl. Installation Notes:
Edelbrock Performer Series, Thunder Series AVS and Carter
AFB carburetors will not fit #3711. Recommended intake
gasket: Fel-Pro #MS96027. For 403 Pontiac Trans Am, use
OEM 4-bbl. only (for shaker hood clearance). EGR block-off
plate included. Use choke block-off plate #8951 (included).
Factory cruise control will not clear EGR valve without
linkage alteration. For EGR applications, use stock carb
only. HEI will clear this manifold. Manifold height: A-2.50",
B-3.90"; Carb pad height: 3.20", (see pages 81-82). Port exit
dimensions: 1.18" x 1.86". Camshaft Recommendations:
Performer Plus #3712. See page 121 for specs.

WWW.EDELBROCK.COM

CARBURETORS

OLDSMOBILE STREET & RACE

MANIFOLDS

Designed for 330-350-403 c.i.d. Oldsmobiles and 1980-1/2 to 1985 307 c.i.d. engines with 5A heads
(casting #3317). The Performer RPM Olds manifold is a high-rise, dual-plane design with 180 firing order
engineered for maximum top-end horsepower while maintaining throttle response. Port flange has extra
material above the runner for use with cast iron 455 heads and Edelbrock Performer RPM heads #60519.
Has clearance for HEI distributor. Carb pad accepts square-bore carbs without adapters.
Performer RPM Olds 350 (non-EGR) l .....................................................................................................#7111
Performer RPM Olds 350 #7111

VICTOR OLDS 350-403 (4500-7500 RPM)

Carburetor Recommendations: Any carburetor class allows. Installation Notes: Recommended intake gasket: Fel-Pro
#MS96027. No provision for OEM choke. Will not clear hood on 403 Olds, Firebird/TA. Manifold height: See pages 81-82
for manifold reference dimensions.

SUPERCHARGERS

OLDSMOBILE 400-455 V8

EFI

The Edelbrock Victor Olds 350-403 manifold provides power levels never before available for competition
single-carb 350-403 Olds engines. Featuring a single-plane Air-Gap design, it accepts square-bore carb
and offers significant horsepower increases over existing intakes in the 4500 to 7500 rpm range. It features
a carb mount pad height of 7" and high-flow constant area 3.2-square-inch runners. The runners have been
optimized to match the flow characteristics of Edelbrock Performer RPM aluminum cylinder heads #60519
and the exit size, as-cast, is 1.28" by 1.94" with plenty of metal thickness for gasket matching and porting.
Victor Olds 350-403 (non-EGR) l...............................................................................................................#2812

Designed for street 400-425-455 c.i.d. Oldsmobiles. Ideal for cars, 4x4s, tow vehicles, RVs and boats.
Includes exhaust crossover plugs #2733 which must be used for marine and off-road use.
Performer Olds 455 (non-EGR) l ...............................................................................................................#2151

WATER PUMPS

Carburetor Recommendations: Edelbrock Thunder

Series AVS or Performer Series carb, 750-800 cfm (see
pages 13-15). Installation Notes: Recommended intake
gasket: Edelbrock #7284. For correct gasket kit when
using #2151 in a marine/competition application, contact
Mondello Performance at (805) 237-8808. Manifold has no
provision for OEM choke operation. Will not fit Toronado
or 4-4-2 Ram-Air scoop without hood modification or
1964-67 Cutlass. HEI will clear. Manifold height: A-4.40",
B-5.50"; Carb pad height: 4.95", (see pages 81-82). Port exit
dimensions: 1.22" x 2.22". Camshaft Recommendations:
Performer Plus #2152. See page 121 for specs.

CRATE ENGINES

PERFORMER OLDS 455 (IDLE-5500 RPM)

Performer Olds 455 #2151

POWER PACKAGES KITS

Edelbrock manifolds
are manufactured
in the USA for
unsurpassed quality.

CAMSHAFT & VALVETRAIN

Victor Olds 350-403 #2812

Carburetor Recommendations: Edelbrock Thunder

Series AVS or Performer Series carb, 650-800 cfm
(see pages 13-15). Installation Notes: Recommended intake
gasket: Fel-Pro #MS96027. No provision for OEM choke.
Will not clear hood on 403 Olds, Firebird/TA. OEM carb
requires conversion to electric/manual choke. Manifold
height: 2" taller than stock A-4.80", B-5.80"; Carb pad height:
5.30", (see pages 81-82). Port exit dimensions: 1.22" x 1.86".
Camshaft Recommendations: Performer RPM #7112.
See page 122 for specs.

MANIFOLDS GASKETS CYLINDER HEADS

PERFORMER RPM OLDS 350 (1500-6500 RPM)

ACCESSORIES
NITROUS

Designed for street 400-425-455 c.i.d. Oldsmobile V8's. Will not fit Toronado or 4-4-2 Ram-Air scoop option
without hood modification. Manifold not equipped with EGR.
Torker 455 (non-EGR) l ..............................................................................................................................#2730
Carburetor Recommendations: Edelbrock Thunder Series AVS or Performer Series carb, 750-800 cfm (see pages 13-15).
Installation Notes: Recommended intake gasket: Edelbrock #7284. For correct gasket kit when using #2730 in a marine/
competition application, contact Mondello Performance at (805) 237-8808. HEI will clear. Manifold height: A-4.50",
B-5.60"; Carb pad height: 5.05", (see pages 81-82). Port exit dimensions: 1.25" x 2.34".

EMISSIONS GUIDE

PLEASE REFER TO PAGE 212 FOR MORE INFORMATION REGARDING THE EMISSIONS GUIDE.

76

INDEX

l 50-STATE LEGAL l RACING ONLY l PRE-POLLUTION CONTROLLED VEHICLES l STOCK REPLACEMENT l ENGINE SWAP

SPORTSWEAR

Torker 455 #2730

FUEL PUMPS

TORKER 455 (2500-6500 RPM)

CARBURETORS
CYLINDER HEADS GASKETS MANIFOLDS

MANIFOLDS

RPM AIR-GAP OLDS 455 (1500-6500 RPM)

The Edelbrock Performer RPM Air-Gap Oldsmobile 455 intake manifold is intended for aggressive street/
strip big-block Olds applications. Designed to optimize horsepower production from 1500 to 6500 rpm, this
manifold will perform best with engines that have an aggressive camshaft profile that will take advantage
of the increased flow this manifold can provide. This manifold features our popular Air-Gap design that
separates the runners from the hot engine oil, resulting in a cooler, denser air charge for more power.
This manifold is compatible with stock heads, but has been designed to work with our RPM cylinder heads
#60519 for optimal performance. Not compatible with EGR or spread-bore carburetors.
RPM Air-Gap Oldsmobile 455 (non-EGR) l ............................................................................................#7551

CAMSHAFT & VALVETRAIN

RPM Air-Gap Olds #7551

Installation Notes: Intake gasket: Edelbrock #7284. Retention of OEM A/C requires bracket modification or fabrication.
Manifold height: A-5.04", B-6.04", Carb Angle-3; Carb pad height: 5.54", (see pages 81-82). Port exit dimensions: 1.28" x 2.30".

KITS POWER PACKAGES

VICTOR OLDS 455 (4500-7500 RPM)

Victor 455 Olds #2811

Edelbrock Victor drag racing manifolds provide power levels never before available for competition
single-carb 455 Olds engines. In independent flow testing, our port-matched design out-flowed the best
fully ported manifolds on the market. Featuring a single-plane Air-Gap design, they are available for
square-bore or 4500 Series carbs to accommodate many competition applications, and offer significant
horsepower increases over existing intakes in the 4500 to 7500 rpm range. With a carb mount pad height
of 8.2", these manifolds stand more than three inches taller than the Edelbrock Torker manifold and
incorporate a high-flow 3.4-square-inch runner. Weve removed the intake bolts between the runners,
thus creating a smoother airflow path for higher airflow and more power! Both manifolds feature a port
size and shape that has been optimized to match the flow characteristics of Edelbrock Performer RPM
#60519 aluminum cylinder heads.
Victor 455 Oldsmobile Manifold (for Standard Flange Square-Bore Carb) l ...................................#2810
Victor 455 Oldsmobile Manifold (for 4500 Series Carb) l ....................................................................#2811

SUPERCHARGERS

Carburetor Recommendations: Any carburetor class allows. Installation Notes: For marine/competition use, contact
Mondello Performance at (805) 237-8808 for correct gasket kit. HEI will clear. Manifold height: A-8.20", B-8.20",
(see pages 81-82).

PONTIAC 326-455 V8

CRATE ENGINES

EFI

PERFORMER PONTIAC (IDLE-5500 RPM)

ACCESSORIES

WATER PUMPS

Performer Pontiac #21563

Designed for 1965-79 Pontiac 326-455 c.i.d. V8's (except Ram Air V and 265/301 V8's). Provides great throttle
response for performance you can feel.
Performer Pontiac (non-EGR) ll ............................................................................................................#2156
Performer Pontiac polished finish (non-EGR) ll ................................................................................#21561
Performer Pontiac with Black Powder Coated Finish (non-EGR) ll..............................................#21563
Performer Pontiac (EGR) ll ....................................................................................................................#3756
Carburetor Recommendations: #2156: OEM 4-bbl. Edelbrock Thunder Series AVS or Performer Series carb, 600-800 cfm
(see pages 13-15) #3756: OEM 4-bbl. Installation Notes: For 1968-71 use our #8015 throttle bracket. For Trans Am use OEM
4-bbl. carb for Shaker Hood clearance. Choke plate included. Recommended intake gasket: Edelbrock #7280. HEI will clear.
Manifold height: A-5.50", B-6.60" measured to engine block same as stock 4-bbl. intake; Carb pad height: 6.05" (see pages
81-82). Port exit dimensions: 1.06" x 1.92". Camshaft Recommendations: Performer Plus #2157. See page 121 for specs.

NITROUS

PONTIAC P-65 DUAL-QUAD (IDLE-5500 RPM)

FUEL PUMPS

Pontiac P-65
Dual-Quad #5450

SPORTSWEAR
INDEX

OLDSMOBILE AND PONTIAC

Dual-Quad Linkage Kit #7094

77

Designed for 1965-79 street 326-455 c.i.d. Pontiac V8's (except Ram Air V), this manifold is a direct
reproduction of the original Edelbrock Pontiac P-65 manifold delivering classic Edelbrock performance
from off-idle to 5500 rpm. Bosses at the rear of the manifold accommodate brake booster, accessory
bracket and throttle linkage. The flanges match the ports on the Edelbrock Performer RPM and D-Port
Pontiac heads for proven performance. Use with Performer-Plus cam #2157 for low-end torque or RPM
cam #7157 for top-end power. Not for HEI distributors. Carb center to carb center: 6-7/16".
Pontiac P-65 (non-EGR) ll.......................................................................................................................#5450
Pontiac P-65 Polished (non-EGR) ll .....................................................................................................#54501
Dual-Quad Braided Fuel Line Kit (see page 23) ll .............................................................................#8088
Dual-Quad Braided Fuel Line Kit with EnduraShine Finish (see page 23) ll ...............................#8091
Dual-Quad Progressive Throttle Linkage Kit (see page 19) .................................................................#7094
Carburetor Recommendations: Performer Series #1404, 500 cfm, #1405, 600 cfm, Thunder Series AVS #1803/1804,
500 cfm. (see pages 13-15). Installation Notes: Recommended intake gasket: Edelbrock #7280. Manifold height: A-5.9",
B-6.34", measured to engine block; Carb pad height: 6.12", (see pages 81-82). Port exit dimensions: 1.07" x 2.02".

WWW.EDELBROCK.COM

CARBURETORS

PONTIAC AND ROVER

MANIFOLDS

Designed for 1965-79 street 326-455 c.i.d. Pontiac V8's (except Ram Air V and 265/301 V8's).
Recommended for high-performance street, strip and marine. Provides maximum high-rpm power while
maintaining good throttle response for street. Has clearance for HEI distributor. Will not fit under Trans
Am Shaker hood without modifications. Also available as a complete manifold and carb kit, see page 134.
Satin
Polished
EnduraShine
Performer RPM Pontiac (non-EGR) ll ....................................... #7156 ....................#71561 ..................#71564

Performer RPM Pontiac #7156

Carburetor Recommendations: Edelbrock Thunder Series AVS or Performer Series carb, 650-800 cfm (see pages 13-15).
Installation Notes: Recommended intake gasket: Edelbrock #7280. No provisions for OEM choke. OEM carb requires
conversion to electric/manual choke. For 1968-71 use #8015 throttle bracket. Manifold height: 1-1/4" taller than stock,
A-6.88", B-8.00" measured to engine block; Carb pad height: 7.45", (see pages 81-82). Port exit dimensions: 1.10" x 2.06".
Camshaft Recommendations: Performer RPM #7157. See page 122 for specs.

VICTOR PONTIAC (3500-7500 RPM)

NITROUS

PERFORMER ROVER (IDLE-5500 RPM)

PLEASE REFER TO PAGE 212 FOR MORE INFORMATION REGARDING THE EMISSIONS GUIDE.

78

INDEX

l 50-STATE LEGAL l RACING ONLY l PRE-POLLUTION CONTROLLED VEHICLES l STOCK REPLACEMENT l ENGINE SWAP

SPORTSWEAR

Carburetor Recommendations: Edelbrock Thunder Series AVS or Performer Series carb, 500 cfm (see pages 13-15).
Installation Notes: Recommended intake gasket: Fel-Pro #MS96002. Manifold height: A-5.00", B-5.92" measured to
engine block; Carb pad height: 5.46", (see pages 81-82). Port exit dimensions: .88" x 1.54". Throttle Bracket #8036 will fit
and accepts GM style throttle, kickdown and cruise control cables.

FUEL PUMPS

Designed for Rover 3500cc V8's (1968 and later). Manifold also fits 1961-63 Buick and Oldsmobile
aluminum 215 c.i.d. V8's. Will not work with stock Stromberg carburetors.
Satin
Polished
Performer Rover (non-EGR) l......................................................................................#2198 ...................#21981

EMISSIONS GUIDE

ACCESSORIES

ROVER 3500cc V8

Performer Rover #2198

WATER PUMPS

Carburetor Recommendations: Any carburetor class allows.

Throttle Body Recommendations: See pages 166. Installation Notes: Recommended intake gasket: Edelbrock #7280.
Manifold height: A-7.70", B-7.70" measured to engine block, (see pages 81-82).

CRATE ENGINES

Two versions of the Victor Pontiac are available for 389-455 competition engines. #2957 accepts
standard flange carburetors and #2956 is for 4500 Series carbs. Both manifolds are ideal for drag racing
(Super Stock, Super Gas, Super Comp, Brackets, etc.), marine or any application requiring maximum
power up to 7500 rpm. Compatible with standard Pontiac cast iron heads, or use with Edelbrock Performer
RPM Pontiac aluminum heads for maximum power. For best performance, use 1" Cloverleaf spacer #8718
with #2956. Port exit size at head is 1.08" x 2.10" with enough material to open it up to larger port openings.
Victor Pontiac (for 4500 Series carburetors) l .......................................................................................#2956
Victor Pontiac (for standard flange carburetors) l ...............................................................................#2957
Cloverleaf 1" Spacer (for maximum performance with #2956) l .........................................................#8718
Super Victor EFI Pontiac (based on #2956) l .........................................................................................#29565
Super Victor EFI Pontiac (based on #2957) l .........................................................................................#29575
Super Victor Pontiac EFI Fuel Rail Kit (standard or Pico injectors) ....................................................#3634

EFI

Victor Pontiac #2956

Carburetor Recommendations: Edelbrock Thunder Series AVS or Performer Series carb, 750-800 cfm (see pages 13-15).
Throttle Body Recommendations: #3878 4V 4150 style or #3849 EFI elbow and #3869 90mm throttle body. Installation
Notes: For 1968-71 use our #8015 throttle bracket. Intake gasket: Edelbrock #7280. HEI will clear. Manifold height:
A-6.03", B-7.15", measured to engine block, .400" higher than stock; Carb pad height: 6.59" (see pages 81-82). Port exit
dimensions: 1.03" x 2.03". Stock air conditioning brackets will not fit on Torker II #50565. Camshaft Recommendations:
RPM #7157. See page 121 for specs.

SUPERCHARGERS

Torker II Pontiac #5056

POWER PACKAGES KITS

Designed for 1965-79 street 389-455 c.i.d. Pontiac V8's. Can be used with Ram Air IV heads.
Will not fit Ram Air V and 265/301 V8's or under Trans Am Shaker hood.
Satin
Polished
Torker II Pontiac (non-EGR) ll .................................................................................#5056 ...................#50561
Torker II EFI Pontiac (non-EGR) ll ..........................................................................#50565 .................#505651
Torker II Pontiac EFI Fuel Rail Kit (Pico injectors with stands) ............................................................#3637

CAMSHAFT & VALVETRAIN

TORKER II PONTIAC (2500-6500 RPM)

MANIFOLDS GASKETS CYLINDER HEADS

PERFORMER RPM PONTIAC (1500-6500 RPM)

CARBURETORS
CYLINDER HEADS GASKETS MANIFOLDS

MANIFOLDS

INTAKE MANIFOLD BOLT KITS

KITS POWER PACKAGES

CAMSHAFT & VALVETRAIN

#8509

#8971

#8981

#8901

#8961

FOR EDELBROCK MANIFOLDS

SUPERCHARGERS

Choke Block-Off Plate for #3771 Ford 351M/400 (supplied with manifold)....................................#8971
Choke Block-Off Plate Ford 351W & 351C (supplied with manifolds).............................................#8981
Choke Adapter for #2101, #2104 & #3701 Small-Block Chevy (supplied with manifolds)............#8901
Choke Adapter for #2161 Big-Block Chevy (supplied with manifold)..............................................#8961
Choke Adapter for #3711 & #2151 Oldsmobile (supplied with manifolds)......................................#8951

SPACER KITS

FOR EDELBROCK 5.0L/5.8L INTAKE MANIFOLDS

CRATE ENGINES

EFI

These fiber laminate spacers for Edelbrock 5.0L/5.8L manifolds provide heat insulation between our upper
and lower manifolds for a cooler charge and more power. They also raise the upper manifold 1/2" for
increased valve cover clearance. Kits include everything you need for your 5.0L/5.8L.
Kit for Edelbrock Manifolds #3821 & #7126 l.........................................................................................#8727
Kit for Edelbrock Manifolds #2945 & #3887 l.........................................................................................#8728
Kit for Edelbrock Manifolds #7123, #7184 & #7185 l.............................................................................#8729

#8727

WATER PUMPS

HEATER HOSE FITTINGS

#8178

#8188

NITROUS

ACCESSORIES

Designed specifically for Edelbrock manifolds, these bolt kits feature reduced hex or 12-point heads for
easy wrench access. Features include cadmium finished steel bolt and hardened washers.
AMC 290-401 c.i.d. (hex head).....................................................................................................................#8534
Chevy 262-400 c.i.d. (1986 & earlier only), (hex head)..............................................................................#8504
Chevy 262-400 c.i.d. with Edelbrock E-Tec or Chevrolet Vortec heads (12 pt. head)..........................#8516
Chevy LS1/LS2 (#7118, #2908(5), #28097, #7518, #7139 & #7140), (hex head)..........................................#8515
Chevy 396-502 c.i.d. (12 pt. head)................................................................................................................#8564
Chevy 348/409 c.i.d. (12 pt. head).................................................................................................................#8509
Chrysler 318-360 c.i.d. (12 pt. head)............................................................................................................#8579
Chrysler 383-400-440 c.i.d. (12 pt. head).....................................................................................................#8594
Chrysler 5.7L & 6.1L (late model HEMI), (hex head).................................................................................#8528
Ford 260-302 c.i.d. (12 pt. head)...................................................................................................................#8524
Ford 302 c.i.d. E-Boss & 351 c.i.d. E-Boss (12 pt. head)..........................................................................#8529
Ford 351W c.i.d. (12 pt. head).......................................................................................................................#8584
Ford 351M/400 c.i.d. (12 pt. head)................................................................................................................#8574
Ford 351C c.i.d. (#7564 only), (12 pt. head)..................................................................................................#8565
Ford 360-390 c.i.d. (#2105 only), (12 pt. head).............................................................................................#8508
Ford FE (#7105 only), (12 pt. head)................................................................................................................#8507
Ford FE (#2936 and #2937 only), (12 pt. head).............................................................................................#8536
Ford 429/460 c.i.d. (12 pt. head)....................................................................................................................#8569
Oldsmobile 330-403 c.i.d. (#2711 and #3711 only), (hex and 12 pt. head mix).......................................#8514
Pontiac 326-455 c.i.d. (hex head)................................................................................................................#8559

REPLACEMENT CHOKE PLATES

FUEL PUMPS

#8078

SPORTSWEAR
INDEX

INSTALLATION ITEMS

#8050

79

These heater hose fittings are designed to hold up to any plumbing task you have. They are made from
high quality aluminum to ensure they wont rust or corrode. Their available clear anodized and black finish
in a variety of sizes to suit your application.

Black Anodized
90 with 3/8" NPT and 3/8" Barb...................................................................................#8167....................#8168
90 with 1/2" NPT and 3/8" Barb...................................................................................#8169....................#8177
90 with 1/2" NPT and 5/8" Barb...................................................................................#8178....................#8179
90 with 1/2" NPT and 1/2" Barb...................................................................................#8180....................#8182
Straight with 1/2" NPT and 3/4" Barb..........................................................................#8183....................#8184
Straight with 1/2" NPT and 3/8" Barb..........................................................................#8185....................#8186
Straight with 3/8" NPT and 5/8" Barb..........................................................................#8187....................#8188
Straight with 1/4" NPT and 3/8" Barb..........................................................................#8191....................#8199

PLUGS, PIPE FITTINGS, ETC.

Brass Hose Fitting for S/B Chrysler Intakes (1" O.D. Barb x 3/4"-14" NPT)..........................................#8078
Brass Hose Fitting Barb (1/4"-18 x 3/8" NPT).............................................................................................#8080
Oldsmobile Cast Iron Exhaust Crossover Plugs......................................................................................#2733

Chrome Black Clear Zinc
Socket Head Pipe Plugs 8-piece Set (1/8", 1/4", 3/8", 1/2" NPT)............... ...N/A........ #8051..........#8052
Socket Head Pipe Plug 1/2" (1 only)............................................................... ...N/A........ ...N/A..........#9126
Socket Head Pipe Plugs 3/8" (1 pair) ............................................................ ...N/A........ ...N/A..........#9127
Socket Head Pipe Plugs 1/4" (1 pair)............................................................. ...N/A........ ...N/A..........#9128
Socket Head Pipe Plugs 1/8" (1 pair)............................................................. ...N/A........ ...N/A..........#9129
WWW.EDELBROCK.COM

CARBURETORS

INSTALLATION ITEMS

MANIFOLDS

Edelbrock thermostats are designed to ensure consistent cooling in high-performance applications.

These thermostats feature a brass and copper valve assembly with a stainless steel body for durability.
They are bolt-on OE style replacements and will fit many popular domestic and import applications.
Application
Temp (F) 53mm (2-3/32") 63mm (2-31/64")
High Performance Thermostats.............................................160...................#8603.........................#8606
High Performance Thermostats.............................................180...................#8604.........................#8607
High Performance Thermostats.............................................190...................#8605...........................N/A

#8603
#8606

WATERNECKS

#4817
#4816

For use on 1986 and later big-block Chevy, when installing Edelbrock #2161 or #3761 intake manifold.
Water Neck Adapter.....................................................................................................................................#8028

#4818
#8028

WATER BYPASS KIT

DISTRIBUTOR CLAMP
#8095

#4803

EDELBROCK GASGACINCH

#9300

HIGH TEMP SILICONE SEALANT

EMISSIONS GUIDE

PLEASE REFER TO PAGE 212 FOR MORE INFORMATION REGARDING THE EMISSIONS GUIDE.

80

INDEX

l 50-STATE LEGAL l RACING ONLY l PRE-POLLUTION CONTROLLED VEHICLES l STOCK REPLACEMENT l ENGINE SWAP

SPORTSWEAR

#9290

Easy to use A/B epoxy is a two part epoxy that is great for cylinder head and intake modifications.
Simply mix the two parts, apply and let cure. Once cured, it can be sanded to shape, drilled and tapped.
Wash hands well after handling.
A/B Epoxy (1 lb. total weight).......................................................................................................................#9290

FUEL PUMPS

A/B EPOXY

NITROUS

#1077

This high quality RTV silicone is for use with intake manifold installations. This oil resistant sealant is
fast-curing, sensor-safe, low-odor, non-corrosive and meets performance specs of OE silicone gaskets.
It also retains high flexibility to prevent leaks caused by vibration and thermal expansion.
RTV Silicone Sealant (1/2 oz.).....................................................................................................................#1077
RTV Silicone Sealant (3 oz.)........................................................................................................................#1076

ACCESSORIES

#4802

Gasgacinch gasket sealer assures proper sealing of all gaskets used during a manifold installation.
It is also effective on water pump, oil pan and valve cover gaskets. Gasgacinch is water and oil resistant
and allows easy gasket removal during parts disassembly.
Edelbrock Gasgacinch (4.0 oz.)...................................................................................................................#9300

WATER PUMPS

Oil Fill Tube and matching push-in Breather is an original style for vintage manifolds
with a 1-1/4" oil breather hole. Included with select Edelbrock intake manifolds.
Chrome finished GM style Oil Fill Tube with Breather ll................................................................#4803

CRATE ENGINES

OIL FILL TUBE AND BREATHER

EFI

This hold-down clamp is for small and big-block Chevys. It is constructed of steel with a chrome finish.
Kit includes stud, nut and a washer.
Distributor Clamp (small & big-block Chevy V8).......................................................................................#4802

SUPERCHARGERS

Provides (2)bypass hoses, fittings and water neck adapter to plumb from the cylinder heads to the water
neck. This is common on circle track 23 high-port, 18, and 15 heads. NOTE: Not for plumbing front to
rear on intake manifolds.
Water Bypass Kit...........................................................................................................................................#8095

POWER PACKAGES KITS

WATER NECK ADAPTER

CAMSHAFT & VALVETRAIN

These polished waternecks are a great way to finish off your engine. They feature an O-ring design for an
improved seal, which also allows for removal without requiring a new gasket. Fits any 1-1/2" diameter
outlet hose.
Straight Aluminum (Chevy 4.3L V6, Chevy V8)..........................................................................................#4816
15 Aluminum (small-block Ford V8).................................................................................................................#4814
45 Aluminum Adjustable (Chevy 4.3L V6, Chevy V8)..............................................................................#4817
90 Aluminum Adjustable (Chevy 4.3L V6, Chevy V8)..............................................................................#4818

MANIFOLDS GASKETS CYLINDER HEADS

HIGH PERFORMANCE THERMOSTATS

CARBURETORS
CYLINDER HEADS GASKETS MANIFOLDS
CAMSHAFT & VALVETRAIN
KITS POWER PACKAGES

IMPORTANT A/B
MEASUREMENTS

CHECKING FOR HOOD CLEARANCE

To ensure adequate hood clearance, check the
height of your stock manifold and compare the
A and B measurements against those of
the Edelbrock manifold prior to purchase.
The heights of all Edelbrock manifolds are listed
under Installation Notes for each model in the
intake manifold section of this catalog.
Please Note: To figure carburetor pad height,
measure from the end seal surface at the front
and rear of the manifold. Add dimensions A
+ B and divide by 2. For example, Performer
manifold #2101: (A) 3.5" + (B) 4.6" 2 = 4.05"

Checking for Hood Clearance on

Edelbrock Pro-Flo XT Manifolds

To ensure adequate hood clearance, check the

height and length of your Pro-Flo XT manifold
prior to purchase. The heights and length
are listed under Installation Notes for each
model. Height measurements are from the end
seal flange and lengths are from the left front
manifold to head bolt hole.

RACE MANIFOLD
REFERENCE DRAWINGS

Manifold Flange View

SPORTSWEAR

R = Bolt hole centerline to port roof

F = Bolt hole centerline to port floor
CH = Carb Height
CA = Carb Angle

INDEX

FUEL PUMPS

NITROUS

ACCESSORIES

WATER PUMPS

CRATE ENGINES

EFI

SUPERCHARGERS

MANIFOLDS

81

REFERENCE DIMENSIONS

MODEL
SMALL-BLOCK CHEVY
#2814 Super Victor Vortec Bowtie
#2825 Super Victor CNC
#2858 Victor Glidden Spider for 18 Heads
#2859 Victor Glidden for 18 Heads
#2900 Victor Jr. CNC
#2901 Victor Jr. Sportsman 2V for Bowtie heads
#2908 Victor Jr. LS1
#28457 Victor Jr. Gen IV LS1
#2912 Victor Jr. Sportsman 2V for Vortec
#2913 Super Victor for Vortec Heads
#2925 Super Victor
#2926 Super Victor for Raised-Port Heads
#2950 Victor 18 2.9 for 18 High-Port Heads
#2955 Victor 18 2.9 Spider for 18 Heads
#2958 & #2959 Victor 18 for 18 Heads
#2962 Victor SB2 for SB2 Heads
#2967 Victor Jr. High-Port for Raised-Port Heads
#2968 Victor High-Port for Raised-Port Heads
#2970 Super Victor 4500
#2821 Super Victor LS3
#2892 Super Victor II
#2971 Super Victor 4500 for Raised-Port Heads
#2972 Bowtie II Victor Jr. for Bowtie Heads
#2975 Victor Jr.
#2978 Victor E
#2995 Victor 18 High-Port for 18 Heads
#2999 Victor Jr. Tall
#7070 Victor Ram
#28097 Super Victor LS1
BIG-BLOCK CHEVY
#2801 Victor Spread Port
#2802 Victor Spread Port Tall Deck
#2805 Victor Spread Port for Big Duke
#2806 Victor Spread Port for Brodix
#28001 Victor 2 Spread Port
#28002 Victor 2 Spread Port Tall Deck
#28003 Big Victor II 9.8 Deck
#28004 Big Victor II 9.8 Deck
#28005 Big Victor II 10.2 Deck
#28006 Big Victor II 10.2 Deck.
#28540 Big Victor 3 9.8" Deck (8 angle)
#28542 Big Victor 3 10.2" Deck (8 angle)
#28570 Big Victor 3 11.2" Deck (8 angle)
#28572 Big Victor 3 11.625" Deck (8 angle)
#28574 Big Victor 3 11.750" Deck (8 angle)
#2807 Victor CNC 454-R (B)
#2902 Victor Jr. 454-R
#2904 Victor Jr. 454-O
#2907 Victor 454-R
#2909 Victor 454-O
#2911 Victor 454-TD
#7085 Victor Tunnel Ram
*Dimensions are in inches. Refer to Reference Drawings.
(A) Measured from lifter valley end seal surface.

RPM
RANGE

R*

4000-8000
3500-8000
5000-8500
5000-8500
3500-8000
3500-7000
3500-8000
3500-7500
3500-7000
3500-8000
3500-8000
3500-8000
5000-8500
5000-8500
5000-8500
5000-8500
4000-8000
4500-8500
4500-9000
3500-7500
4000-8000
4500-9000
3500-8000
3500-8000
4500-8500
4500-8500
3500-8000
6500-10,000
4000-8200

1.13
0.96
0.83
1.76
0.84
0.89
1.39
1.85
0.18
0.18
0.85
1.06
1.76
1.76
1.76
0.78
1.10
1.10
0.87
0.98
0.94
1.06
0.89
0.80
0.80
1.76
0.80
0.96
1.35

1.07
1.25
1.21
0.26
1.23
1.15
1.35
0.57
1.91
1.91
1.15
0.96
0.26
0.26
1.21
1.46
0.75
0.75
1.15
1.22
1.16
0.96
1.15
1.10
1.10
0.23
1.10
1.24
1.39

1.14
1.31
1.21
1.20
1.26
1.18
0.98
1.17
N/A
N/A
1.20
1.17
1.20
1.20
1.20
1.55
1.18
1.18
1.21
1.29
1.21
1.21
1.18
1.10
1.10
1.14
1.10
1.20
1.08

2.20
2.21
2.04
2.02
2.07
2.04
2.74
2.42
2.09
2.09
2.00
2.02
2.02
2.02
2.04
2.13
1.85
1.85
2.02
2.20
2.10
2.02
2.04
1.90
1.90
1.99
1.90
2.20
2.74

6.77
5.50
7.03
7.03
4.58
5.98
4.95
7.40
5.98
5.63
5.50
5.91
7.03
7.03
7.03
7.60
5.35
5.35
6.36
7.67
6.56
6.77
4.58
4.58
4.58
6.54
5.58
7.13
6.07

0
0
0
0
3
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
3
3
3
0
0
0
0

3500-8500
3500-8500
3500-8500
3500-8500
3500-8500
3500-8500
3500-8500
3500-8500
3500-8500
3500-8500
3500-8500
3500-8500
3500-8500
3500-8500
3500-8500
3500-8000
3500-7500
3500-7500
3500-8000
3000-7500
3500-8500
3500-8500

1.06
1.06
0.94
0.94
1.06
1.06
1.49
1.46
1.49
1.46
1.55
1.55
1.55
1.55
1.55
1.45
1.30
0.84
1.30
0.84
1.30
1.44

1.38
1.38
1.50
1.50
1.38
1.38
1.03
1.16
1.03
1.16
1.15
1.15
1.15
1.15
1.15
1.15
1.05
1.07
1.05
1.07
1.05
1.06

1.74
1.74
1.74
1.74
1.74
1.74
1.91
1.84
1.91
1.84
2.05
2.05
2.05
2.05
2.05
1.75
1.55
1.55
1.55
1.55
1.55
1.78

2.44
2.44
2.44
2.44
2.44
2.44
2.52
2.62
2.52
2.62
2.70
2.70
2.70
2.70
2.70
2.45
2.35
1.91
2.35
1.91
2.35
2.50

8.12
8.44
8.06
8.32
9.21
9.53
9.21
9.21
9.53
9.53
7.12
7.40
8.35
8.65
8.74
5.90
5.96
5.96
5.90
5.90
6.23
4.33

0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0

F* W* H* CH* CA

(B) Note that exit dimensions may vary slightly

(C) Complies to current NASCAR engine parameters.

W = Width
H = Height

WWW.EDELBROCK.COM

CA

6.95
6.20
6.95
6.20
7.62
7.56
7.50
7.68

0
0
0
0
0
0
0
0

3500-8000 1.21 0.94 0.98 2.15 6.30

3500-8000 1.12 0.92 1.02 2.04 4.92
3500-8000 1.10 0.90 1.32 2.00 4.92

0
4
4

3500-7500
3500-7500
3500-8000
3500-8000
2500-6500

1.55
1.75
1.75
1.55
1.66
1.66
1.72
1.72

2.30
2.45
2.45
2.30
2.38
2.42
2.45
2.48

1.16
1.16
1.16
1.39
0.92

1.01
1.01
1.01
1.19
1.06

1.15
1.15
1.15
1.30
1.80

2.17
2.17
2.17
2.58
1.98

5000-9000 1.00
5000-8500+ 1.11
5000-8500+ 1.52
5000-8500+ 1.11
3500-8000 0.90
4500-8500 1.00
3500-8000 1.00
4500-8500 1.00
5000-9000 1.00
4000-7500 0.96
3500-7500 0.90
3500-7500 0.90
4500-8500 1.58

1.00
0.98
0.38
0.98
1.00
1.00
1.00
1.00
1.00
1.00
1.00
1.00
0.26

1.18
1.38
1.38
1.38
1.08
1.18
1.18
1.18
1.28
1.16
1.10
1.10
1.39

2.00
2.09
1.90
2.09
1.90
2.00
2.00
2.00
2.10
1.96
1.90
1.90
1.84

6.13 0
6.25 0
6.40 0
6.40 0
5.10 2.5
7.08
N/A
7.16(A)
N/A
5.50
6.25
6.35
5.95
6.35
8.25
5.59
5.75
6.81

0
0
0
0
0
0
0
0
0
N/A
0
0
0

3500-8000 1.84 0.32 1.88 2.16 6.30

3500-8000 1.84 0.32 1.88 2.16 6.30

0
0

4500-7500 0.97 0.97 1.28 1.94 7.00

3500-7500 1.22 1.02 1.25 2.24 8.20

3500-7500 1.22 1.02 1.25 2.24 8.20

0
0

3500-7500 0.61 1.49 1.08 2.10 7.70

4500-7500 0.61 1.49 1.08 2.10 7.70

0
0

(B) Note that exit dimensions may vary slightly

(C) Complies to current NASCAR engine parameters.

NITROUS

0
0

ACCESSORIES

4500-8500 0.88 1.10 1.20 1.98 6.49

4500-8500 0.88 1.10 1.20 1.98 6.49

FUEL PUMPS
SPORTSWEAR

Edelbrock Intake Manifolds

An Exclusive NASCAR Performance Product

82

INDEX

l 50-STATE LEGAL l RACING ONLY l PRE-POLLUTION CONTROLLED VEHICLES l STOCK REPLACEMENT l ENGINE SWAP
PLEASE REFER TO PAGE 212 FOR MORE INFORMATION REGARDING THE EMISSIONS GUIDE.

1.00
1.15
1.00
1.00
0.98
1.06
1.06
0.81

WATER PUMPS

EMISSIONS GUIDE

1.30
1.45
1.30
1.30
1.40
1.36
1.38
1.67

CH*

CRATE ENGINES

Pro Eliminator Drag Boat Racer Darin Moilanen

uses Edelbrock Nitrous system, QwikData 2 system,
Victor 24 cylinder heads, Victor 2-R Tunnel Ram
intake manifold and Russell ProClassic II hose

3500-8500
3500-8500
3500-8500
3500-8500
3500-8500
4000-8500
3500-8500
3500-8500

F* W* H*

EFI

*Dimensions are in inches. Refer to Reference Drawings.

(A) Measured from lifter valley end seal surface.

R*

SUPERCHARGERS

Andy Manson, NMCA Street Outlaw racer uses an

Edelbrock Intake Manifold and Cylinder Heads

RPM
RANGE

POWER PACKAGES KITS

Rickie Smith, first ever "Back to Back" NHRA Pro Mod

Champion uses Edelbrock EFI

MODEL
BIG-BLOCK CHEVY (CONT.)
#2916 Super Victor Tall-Deck BBC
#2917 Super Victor BBC CNC (B)
#2918 Super Victor Tall-Deck BBC CNC (B)
#2927 Super Victor BBC
#2895 Super Victor II Standard-Deck Raised-Port
#2896 Super Victor II Short-Deck
#2897 Super Victor II Tall-Deck
#2898 Super Victor II Short-Deck Raised Port
SMALL-BLOCK CHRYSLER
#2815 Super Victor
#2915 Victor 340
#2920 Victor W-2
BIG-BLOCK CHRYSLER
#2886 Victor 383
#2954 Victor 440
#2891 Super Victor 440
#2893 Super Victor 440
#7524 Dual-Quad 426-572 HEMI
SMALL-BLOCK FORD
#2828 Glidden Victor 351W
#2860 Glidden Victor SC-1
#2863 Glidden Victor 351Y
#2868 Glidden Victor SC-1
#2921 Victor Jr. 302
#2924 Super Victor 351W
#2928 Super Victor 8.2
#2929 Super Victor 9.2
#2934 Super Victor 8.7
#2945 Victor 5.0
#2980 Victor 351W
#2981 Victor 351W
#2991 Victor 351Y
FE FORD
#2936 Victor FE
#2937 Victor FE
429/460 FORD
#2965 Victor 460
#2966 Victor 460
350-403 OLDSMOBILE
#2812 Victor 350-403 Olds
400-455 OLDSMOBILE
#2810 Victor 455 Olds
#2811 Victor 455 Olds
389-455 PONTIAC
#2957 Victor Pontiac
#2956 Victor Pontiac

CAMSHAFT & VALVETRAIN

Phil Hines, NMRA/NMCA Street Outlaw racer uses

an Edelbrock Intake Manifold, Cylinder Heads

MANIFOLDS

MANIFOLDS GASKETS CYLINDER HEADS

Edelbrock-Equipped
Race-Winning Competitors

CARBURETORS

REFERENCE DIMENSIONS

CARBURETORS

GASKETS

CYLINDER HEADS GASKETS MANIFOLDS

WHY YOU NEED EDELBROCK GASKETS

Any gasket can create a seal, but a good gasket can do it with less clamping force, and for a longer
period of time. Edelbrocks gaskets are not only manufactured from extremely high quality materials,
but theyre also designed specifically to fit our intakes and cylinder heads, so theres no chance that
our gaskets will interfere with the operation of either component. These gaskets also work with most
stock cylinder heads and intakes, aluminum or cast-iron, as well as other aftermarket components.
Top quality Edelbrock gaskets ensure a perfect seal every time.

COMPLETE HEAD GASKET SETS

Edelbrock head gaskets are matched to Edelbrock performance cylinder heads to provide the best sealing
solution and optimal performance. These complete sets include every gasket you need for installation
head, intake, exhaust, valve cover (except LT1 & LT4), distributor, and thermostat housing gaskets.

CYLINDER HEAD GASKETS

INTAKE GASKETS

Complete Head Gasket Set #7364 for small-block Ford

Edelbrock Exhaust Gaskets are made of EnCore HTX-900; a high-density non-asbestos fiber/metal
core composite material consisting of two graphite coated, heat resistant fiber blended sheets that
are mechanically and chemically fused to an expanded steel core. The finished product provides high
heat resistance, excellent load retention and unmatched sealing performance on exhaust manifold and
header applications. A 50% recovery rate allows for gasket expansion in the event your header loses
the proper header bolt torque. Edelbrock exhaust gaskets are an Edelbrock product.

Edelbrock partners with top cylinder head gasket

manufacturers to provide the best head gaskets for use
with Edelbrock aluminum cylinder heads.

CRATE ENGINES

EFI

VALVE COVER GASKETS

Fabricated from performance CRC (core-reinforced-composite), Edelbrock Valve Cover Gaskets provide
excellent sealing integrity and conformability for easy installation. The multi-layer construction has two
highly compressible, high rubber content, fiber-reinforced outside layers which are chemically bonded
to a high strength composite core. This unique core-reinforced construction has a radial strength to resist
high-vacuum or blow-out conditions. Edelbrock valve cover gaskets are an Edelbrock product.

WATER PUMPS

BULK PACK INTAKE GASKET SETS

Edelbrock gaskets are designed specifically to fit our

Performer & Performer RPM intakes and head ports, so
theres no chance of our gaskets interfering with airflow

NITROUS

ACCESSORIES

Matched to Edelbrock Performer, Performer RPM and Victor Jr. cylinder heads and manifolds, our
Intake Gaskets allow for optimum flow and performance. The new MP-2N Micropore technology does
not use solvents making our gaskets environmentally friendly. Impervious to most chemicals, this synthetic
fiber composite provides a high recovery under load. This means that when compressed, the gasket will
conform to any imperfections on the sealing surface even using lower flange pressures. A nitrile bead
around each port opening makes the seal even better. Edelbrock intake gaskets are an Edelbrock product.

EXHAUST GASKETS

SUPERCHARGERS

KITS POWER PACKAGES

CAMSHAFT & VALVETRAIN

Edelbrock head gaskets provide the best sealing solution and are matched to Edelbrock cylinder heads
for optimal performance. Edelbrock relies on industry leading head gasket manufactures to ensure
our head gasket sets will provide the best fit and sealing properties when used with Edelbrock aluminum
cylinder heads. Edelbrock head gaskets are manufactured from high-density materials and feature
a superior design that performs under pressure and provides a long-lasting seal, without re-torqueing.

These gaskets feature Micropore MP-2N an ultra-modern environmentally safe gasket material provides
excellent sealing on rough, irregular flange surfaces. Impervious to most chemicals, including gasoline,
alcohol, coolant and oils, Edelbrock intake gaskets provide optimum sealing in intermittent operating
temperatures up to 400F. The Synthetic Fiber Blend is light years above existing materials currently
on the market by providing a minimum of 30% recovery under a load. This means that the gasket,
when compressed, has a memory that allows it to expand, filling in any imperfections on a sealing surface.
1955-86 Small-Block Chevy - 10-pack intake gasket set .......................................................................#72018
Small-Block Chevy Vortec Bowtie - 10-pack intake gasket set (.060" thick)......................................#72068*
Small-Block Chevy Vortec Bowtie - 10-pack intake gasket set (.120" thick)......................................#72078*
E-Tec, Vortec & Fast Burn small-block Chevy - 10-pack intake gasket set.......................................#72358
Small-Block Ford 1963-96, 289, 302 S/B [except Boss], 1982-96,
5.0L & 5.8L 351W - 10-pack intake gasket set ...........................................................................................#72208

EDELBROCK GASGACINCH

Gasgacinch gasket sealer assures proper sealing of all gaskets used during a manifold installation.
It is also effective on water pump, oil pan and valve cover gaskets. Gasgacinch is water and oil resistant
and allows easy gasket removal during parts disassembly.
Edelbrock Gasgacinch (4.0 oz.) ..................................................................................................................#9300

FUEL PUMPS

#9300

HIGH TEMP SILICONE SEALANT

SPORTSWEAR
INDEX

INTRODUCTION, BULK PACK & SEALANTS

#1077

83

This high quality RTV silicone is for use with intake manifold installations. This oil resistant sealant is
fast-curing, sensor-safe, low-odor, non-corrosive and meets performance specs of OE silicone gaskets.
It also retains high flexibility to prevent leaks caused by vibration and thermal expansion.
RTV Silicone Sealant (1/2 oz.) ....................................................................................................................#1077
RTV Silicone Sealant (3 oz.) .......................................................................................................................#1076
* While Supplies Last

WWW.EDELBROCK.COM

CARBURETORS

CARBURETOR & MANIFOLD GASKETS

EDELBROCK SQUARE-BORE CARB GASKETS
#1499

#9265

#3899

#9266

HEAT INSULATOR GASKETS

Designed to help prevent fuel percolation in Performer Series and Thunder Series AVS carburetors exposed
to extreme underhood temperatures. Use #9265 with open plenum manifolds such as Torker II and Victors.
#9266 features a divided center which is designed to seal the carburetor to dual-plane manifolds including
Performer, Performer RPM and most RPM Air-Gap manifolds. All gaskets come with extended carb studs.
Square-Bore Heat Insulator Gasket (0.320" thick)...................................................................................#9265
Divided Square-Bore Heat Insulator Gasket (0.320" thick) ...................................................................#9266
Square-Bore Heat Insulator Gaskets for
Edelbrock Dual-Quad Manifolds (0.125" thick - 2 gaskets included) l ..............................................#9267

AIRHORN GASKET SETS FOR Q-JET CARBURETORS

For Edelbrock and GM Rochester Q-Jet carbs. Not for computer-controlled carbs.
Fits Edelbrock Q-Jet Carbs #1903, #1904, #1905, #1906 and #1910 (5 gaskets included) ..................#1987
Fits Edelbrock Q-Jet Carb #1901 (5 gaskets included) ...........................................................................#1989
Fits Edelbrock Q-Jet Carb #1902 (5 gaskets included) ...........................................................................#1998

#1987

#6940

VICTOR JR. 2V SPORTSMAN GASKET

Carb Base Gasket for #2901, #2912, #2940 and #2941 (6 gaskets included) ........................................#6940

FORD EGR GASKETS

#3898

THROTTLE BODY GASKETS

65mm 70mm 75mm

90mm
Throttle Body Flange ...............................................................................N/A ....... ..N/A ........ ..N/A...........#3813
1986-93 5.0L Mustang Replacement Gasket Sets ............................#3830 ...... #3830....... #3831............N/A
#3813

MANIFOLD REPLACEMENT GASKETS

CHEVY 2-PIECE MANIFOLD GASKETS

#3832

#3895

PRO-FLO 2 SYSTEM GASKETS

SPORTSWEAR

#3894

1992-00 D16 (intake manifold gasket (D15B7 & D16Z6 will require trimming of gasket) .....................#15005
1994-01 Honda B16 & 1997-01 Acura Integra Type-R B18C5 (intake manifold gasket) .....................#15041
1994-01 Acura Integra GSR B18C1 (intake manifold gasket) .................................................................#15042
1994-01 Acura Integra LS B18B (intake manifold gasket) ......................................................................#15043

FUEL PUMPS

HONDA & ACURA INTAKE MANIFOLD GASKETS

Honda Intake Manifold Gasket #15005

NITROUS

#6950

1986-95 5.0L (base and plenum cover gaskets for #3821)........................................................................#3832

1986-95 5.0L (base and plenum cover gaskets for #7126)........................................................................#7231
5.0L/5.8L EFI Victor (base and plenum cover gaskets for #2945 and #3887).........................................#7232
1987-96 5.0L/5.8L EFI trucks (base and plenum cover gaskets for #3841 and #3881)..........................#3833
Performer 5.0 RPM II (base and plenum gasket for #7123) ....................................................................#7233
Slingshot Manifold Gasket (located between manifold top and bottom pieces) ...............................#8700

ACCESSORIES

FORD 2-PIECE MANIFOLD GASKETS

WATER PUMPS

#6942

1982-85 2.8L 2V V6 (top gasket for #3785/#3787) .......................................................................................#6941

1982-85 2.8L 4V V6 (top gasket for #3785/#3789) .......................................................................................#6942
1985-91 305-350 S/B High-Flo T.P.I. (gasket for runners to base #3865 & #3870) ...............................#3866
1957-86 302-327-350-400 S/B Tunnel Ram (base to top gasket for #7110) ...........................................#6999
1957-86 302-327-350-400 S/B Tunnel Ram (set of 5 pairs for #7110) .....................................................#6950
1957-86 302-327-350-400 S/B Victor Tunnel Ram (top gasket for #7070) .............................................#6988
396-502 B/B Tunnel Ram 2-0/2-R (top gasket for #7115 & #7075) ..........................................................#6989
Victor Tunnel Ram Base to Top Replacement Gasket (for #7085, #7086, #70855) .............................#7355

CRATE ENGINES

Edelbrock replacement gaskets are made to our high standards of quality and performance. Theyre the
same high quality gaskets that we supply with our intakes, heads, carbs and other components.

#7233

#6941

EFI

#3830

SUPERCHARGERS

#3897

EGR Gaskets; OEM 4V (for #3721, #3723, #3781, and #3783 Manifolds) .................................................#3896
EGR Gasket; OEM 2V (for #3721, #3723, #3781, and #3783 Manifolds) ...................................................#3897
EGR Plate Gasket; OEM 4V (for #3766 Manifold) .....................................................................................#3898

POWER PACKAGES KITS

Performer Series & Thunder Series AVS carbs will work with Ford automatic overdrive trans (AOD) when used
with Lokar bracket SRK-4000, for more info call (865) 966-2269 or go to www.lokar.com

CAMSHAFT & VALVETRAIN

#9267

Square-Bore Gasket Set (includes airhorn and carb-to-manifold gasket) ..........................................#1472

Airhorn Gasket (5 gaskets included)..........................................................................................................#1499
Carburetor Base Gasket (2 gaskets included) .........................................................................................#3899

MANIFOLDS GASKETS CYLINDER HEADS

CARBURETOR GASKETS

Replacement 2V Air Valve Gasket (for Pro-Flo 2 systems #35030).......................................................#3894

Replacement 4V Air Valve Gasket (for Pro-Flo 2 systems #3500 & #3550)..........................................#3895

EMISSIONS GUIDE

PLEASE REFER TO PAGE 212 FOR MORE INFORMATION REGARDING THE EMISSIONS GUIDE.

84

INDEX

l 50-STATE LEGAL l RACING ONLY l PRE-POLLUTION CONTROLLED VEHICLES l STOCK REPLACEMENT l ENGINE SWAP

CARBURETORS
CYLINDER HEADS GASKETS MANIFOLDS
CAMSHAFT & VALVETRAIN

FRONT COVER GASKET SETS

#6997

#6998

Includes front cover gasket and front seal.

For Small-Block Chevy ................................................................................................................................#6997
For Big-Block Chevy ....................................................................................................................................#6998
For Small-Block Ford ...................................................................................................................................#6991

#6991

WATER PUMP GASKETS

#7252

#7257

For S/B Chevy ................................................................................................................................................#7251

For B/B Chevy ................................................................................................................................................#7252
For S/B and B/B Chrysler ............................................................................................................................#7257
For early S/B Ford (standard rotation including 351W, 351C, and 351M/400) .....................................#7253
For late S/B Ford (reverse rotation) ...........................................................................................................#7254
For B/B Ford & FE .........................................................................................................................................#7258

#7258

THERMOSTAT GASKET

For 1983-2002 Jeep 4.0L Inline Six ............................................................................................................#7274

#7274

KITS POWER PACKAGES

SUPERCHARGERS
EFI
CRATE ENGINES
WATER PUMPS
ACCESSORIES
NITROUS
FUEL PUMPS
SPORTSWEAR
INDEX

FRONT COVER, WATER PUMP

SUPERCHARGER LID & REFERENCE GUIDE

GASKETS

E-FORCE SUPERCHARGER LID GASKET

This is a replacement gasket for the E-Force supercharger lid cover. Will fit the following applications:
Camaro systems #1596, #1597, #1598, #1599; Corvette systems #1572, #1573, #1574, #1575, #1576, #1590,
#1591, #1592, #1593, #1594, #1595; Truck/SUV systems #1564, #1567, #1577, #1578, #1579.
E-Force Supercharger Lid Replacement Gasket .......................................................................................#7397

#7397

GASKET APPLICATION REFERENCE GUIDE

Head Gaskets

Intake Gasket

Exhaust Gaskets

THICKNESS

PART #

Complete
Set (A)

1.80" x 1.30" #7239

1/4"

#7532

#7372

1.80" x 1.30" #7239

1/4"

#7532

#7372

#7246 (C) 1.20" x 1.63" #7247

3/16"

#7546

#7369

1.50" x 1.50" #7204

5/16"

#7549

#7361

1.50" x 1.50" #7204

5/16"

#7549

Year
AMC

Model

BORE COMPRESSED VOLUME

PART #

PORT SIZE

THICKNESS

PART #

1967-1969

290-390

4.275"

0.045

10.60cc

#7329

1.13" x 2.21"

.060

#7213

1970-1991

290-304-343; 360-390-401

4.275"

0.045

10.60cc

#7329

1.13" x 2.21"

.060

#7213

400-455

4.400"

0.050

12.50cc

#7346

1.15" x 2.38"

.032

1.28" x 2.10"

.060

#7209

4.125"

0.039

8.70cc

#7310

1.28" x 2.09"

.060

#7201

PORT SIZE

PART #

Valve Cover

BUICK
1967-1976

CHEVROLET
1985-1995

V6 200-229-262 (3.8 and 4.3L)

1958-1986

302-327-350 S/B

1958-1986

400 S/B

1.28" x 2.09"

.060

#7201

Edelbrock 23 S/B Victor Jr.

and Victor High-Port Intakes

1.31" x 2.02"

.060

#7217 (K)

Edelbrock 18 S/B Victor Jr.

and Victor High-Port Intakes

1.23" x 2.13"

.060

#7218 (K)

5/16"

#7549

#7367

1958-1986

E-Tec 170 302-327-350 S/B

4.125"

0.039

8.70cc

#7310

1.08" x 2.11"

.120

#7235 (C) 1.50" x 1.50" #7204

1958-1986

E-Tec 200 302-327-350 S/B

#7310

1.26" x 2.24"

.120

#7215 (C) 1.50" x 1.50" #7204

5/16"

#7549

1958-1986

E-Tec 170 400 S/B

1.08" x 2.11"

.120

#7235 (C) 1.50" x 1.50" #7204

5/16"

#7549

1958-Later S/B Vortec Bowtie

4.125"

0.039

8.70cc

#7310

1.14" x 2.20"

.060

#7206 (E) 1.50" x 1.50" #7204

5/16"

#7549

1958-Later S/B Vortec Bowtie

4.125"

0.039

8.70cc

#7310

1.14" x 2.20"

.120

#7207 (E) 1.50" x 1.50"

5/16"

#7549

#7204

1992-1997

LT1

4.100"

0.052

11.50cc

#7342

2.1" x 1.265"

.060

#7243 1.385" x 1.400" #7248

(D shaped)

#7380

1992-1997

LT4

4.100"

0.052

11.50cc

#7342

2.3" x 1.25"

.060

#7244 1.385" x 1.400" #7248

(D shaped)

#7379

1997-Later LS1

3.920"

0.051

N/A

#7388

(Set of 8 O-Rings)

#7386

1997-Later LS2

4.080"

0.051

N/A

#7387

(Set of 8 O-Rings)

#7386

85

WWW.EDELBROCK.COM

CARBURETORS

REFERENCE GUIDE GASKETS

Intake Gasket

#7582

#7378

#7202

1.940"
(round)

#7205

5/16"

#7580

#7362

#7208 (C)

#7203 1.940" (round) #7205

5/16"

#7580

#7363

.060

#7202 1.940" (round) #7205

5/16"

#7580

#7376

1.82" x 2.54"

.060

#7202 1.940" (round) #7205

5/16"

#7580

#7389

2.02" x 2.635"

.060

#7245

0.130"

#7559

2.02 x 2.72

.060

#7249
#7259

0.050

11.20cc

#7326

1.17" x 2.30"

.060

#7276

1.75" x 1.25"

#7236

3/16"

#7592

#7370

4.140"

0.048

10.70cc

#7327

1.18" x 2.18"

.060

#7277

1.50" x 1.20"

#7237

5/16"

#7593

#7371

1.93" x 1.97"

.060

#7250

361-383-400,413-426 [except HEMI],

and 440 engines

4.505"

0.038

9.69cc

#7325

1.23" x 2.27"

.030

#7226

3/16"

#7591

#7366 (B)

426-572 HEMI engines (Gen II)

4.590"

0.051

14cc

#7347

2.00" x 1.84"

.060

#7278

1.840" x
1.740"

#7279

1/4"

#7589

#7349

1938-1948
1949-1953

Ford/Mercury Flathead

3.187"
3.420"

#7394
#7393

1.35" x 2.00"

.062

#7234

#7384
#7383

1963-1996

289, 302 S/B [except Boss]

1982-1996

5.0L & 5.8L 351W

4.100"

0.045

9.8cc #7313 (J) 1.20" x 2.00"

.060

#7220

1.25" x 1.48"

#7227

5/16"

#7560

#7364

1.28" x 2.10"

.060

#7219

348/409 W-Series

4.500"

0.0435

12.20cc

#7359

2.50" x 1.31"

.060

1965-1990

Mark IV, 396-402-427-454 B/B

Rectangular Port

4.370"

0.039

9.70cc

#7302

1.82" x 2.54"

.060

1965-1990

Mark IV, 396-402-427-454-555

B/B Rectangular Port 6 Bolt Flange
with No Crossover

1.82" x 2.46"

.060

1965-1990

Mark IV, 396-402-427-454

B/B Oval Port

4.370"

0.038

10.05cc

#7302

1.82" x 2.05"

.060

Gen V & VI, 454

1991-Later B/B Rectangular Port

4.370"

0.038

10.05cc

#7375

1.82" x 2.54"

Gen V & VI, 502

1991-Later B/B Rectangular Port

4.540"

0.039

10.05cc

#7356

4.840"
5.000"

4.180"

Edelbrock Big Victor

B/B Spread Port Cylinder Heads

Edelbrock BV3
B/B Cylinder Heads

PORT SIZE

PART #

Valve Cover

CHRYSLER
1966-1987

318-340-360

1992-Later Magnum
5.7L & 6.1L (Gen III) HEMI
1958-1979

#7225 (B) 1.84" x 1.33"

FORD

302 E-Boss and

351W E-Boss (Clevor) Conversions

4.100"

0.047

10.20cc #7341 (H) 1.52" x 2.16"

.060

#7265

1.98" x 1.56"

#7262

1/4"

#7569

#7377

1970-1974

351 Cleveland

4.080

0.038

8.10cc

#7328

1.52" x 2.16"

.060

#7265

1.98" x 1.56"

#7262

1/4"

#7569

#7374

1958-1976

390-428 FE

4.400"

0.038

9.90cc

#7337

1.40" x 2.10"

.060

#7224

1.40" x 2.04"

#7229

5/16"

#7568

#7368

1968-1987

429-460 B/B

4.500"

0.048

12.5cc

#7314

1.98" x 2.26"

.060

#7223 (D) 1.50" x 2.10"

#7228

5/16"

#7563

#7365

4.0L Inline Six

4.005"

0.042

8.88cc

#7348

1.67" x 1.38"

.060

#7275

1.66"
(round)

N/A

5/32"

#7583

#7350

4.250"

0.042

9.8cc

#7340

1.44" x 2.44"

.060

#7284

1.95" x 1.56"

#7238

1/4"

#7598

#7373

4.300"

0.038

8.96cc

#7381

1.18" x 2.20"

.060

#7280

1.880"

#7281

3/16"

#7590

#7382

JEEP
1987-2006

OLDSMOBILE
1965-1976

400-425-455

PONTIAC
1961-1979

326-389-400-421-428-455

FUEL PUMPS

IMPORTANT FOOTNOTES
(E) For use with Bowtie Vortec #2814 intake
(F) For use with large port applications, including Edelbrock RPM
heads #60809/#60819,will not fit factory heads
(G) For use with large port applications only
(H) For use with Edelbrock RPM heads #61699 only

EMISSIONS GUIDE

(I) For use with small port applications only

(J) Graphite style
(K) Gasket is trim-to-fit for port matching

PLEASE REFER TO PAGE 212 FOR MORE INFORMATION REGARDING THE EMISSIONS GUIDE.

86

INDEX

l 50-STATE LEGAL l RACING ONLY l PRE-POLLUTION CONTROLLED VEHICLES l STOCK REPLACEMENT l ENGINE SWAP

SPORTSWEAR

(A) Does not include end seals; Edelbrock recommends

the use of silicone sealant in place of end seals
(B) Must be used with OE-style valley pan
(C) Does not have embossed silicone bead
(D) Does not fit CJ or SCJ

NITROUS

ACCESSORIES

Edelbrock Victor Jr. Cylinder

Heads with No Crossover

WATER PUMPS

CRATE ENGINES

5/16"

1958-1965

Exhaust Gaskets
PART #

EFI

#7240 (G) 1.813" x 1.75" #7241 (F)

#7242 (I)

THICKNESS

SUPERCHARGERS

Complete
Set (A)

PORT SIZE

POWER PACKAGES KITS

PART #

PART #

CAMSHAFT & VALVETRAIN

THICKNESS

BORE COMPRESSED VOLUME

MANIFOLDS GASKETS CYLINDER HEADS

Head Gaskets

Year
Model
CHEVROLET (CONT.)

CARBURETORS

INTRODUCTION

Edelbrock Cylinder Heads

are Designed, Cast and
Assembled in the USA
for Unsurpassed Quality.

EDELBROCK CYLINDER HEADS

MADE IN USA QUALITY AND PERFORMANCE!

Each cylinder head we bring to market is engineered, tested, cast and machined in our manufacturing facilities in Southern California. Our investment in
people, equipment and quality processes to ensure that every cylinder head that leaves our warehouse will perform up to its expectations. Every cylinder
head is cast from high quality A356 aluminum and heat treated to T6 specifications in-house. The result of the T6 heat treat process is a strong casting that
can handle the demands of your engine. Our cylinder heads also use highly efficient ports and state-of-the-art combustion chamber shapes that offer improved
performance throughout the rpm range for great throttle response and top-end horsepower. Other top-quality features include threaded inserts in rocker stud
and exhaust bolt holes for superior strength and durability, and manganese-bronze valve guides. All of these are features that some other companies dont
include. Since 1938, we have prided ourselves on delivering the highest quality and best performing automotive products on the market.

CRATE ENGINES

EFI

SUPERCHARGERS

KITS POWER PACKAGES

CAMSHAFT & VALVETRAIN

CYLINDER HEADS GASKETS MANIFOLDS

CYLINDER HEADS

E-STREET CYLINDER HEADS

ACCESSORIES

WATER PUMPS

Edelbrock E-Street cylinder heads offer American made quality and

affordable performance. E-Street cylinder heads feature as-cast ports and
are designed for entry-level street performance applications operating in the
idle-to-5500 rpm range. Their modern combustion chamber designs improve
the combustion process and larger than stock intake and exhaust ports move
more air through your engine for improve efficiency. E-Street cylinder heads
are sold in pairs and are available for popular V8 engines.
E-Street Head for B/B Chevy #50459

FUEL PUMPS

NITROUS

Important Notes: Edelbrock heads are sold individually (except Flatheads,

E-Street and E-Series small-block applications) check listings for details.
Bare heads will have valve guides and seats installed, but will require final
sizing and a valve job to match the valves you will be using.

PERFORMER CYLINDER HEADS

INDEX

SPORTSWEAR

Select performer heads are 50-state emissions legal and are designed to
fit emissions controlled engines. These heads provide great torque and
horsepower up to 5500 rpm.
Performer Pontiac D-Port Head #61579

87

WWW.EDELBROCK.COM

CARBURETORS

INTRODUCTION CYLINDER

HEADS

Performer RPM heads are perfect for street performance, daily drivers, street
rods and muscle cars where seat-of-the-pants performance is needed. These
cylinder heads deliver great throttle response and power from 1500 to 6500 rpm.
They also feature the highest quality intake and exhaust valves and valve springs.

Performer RPM for S/B Ford #60259

E-CNC CYLINDER HEADS

For the ultimate in performance, our E-CNC cylinder heads are the answer.
These cylinder heads are fully CNC ported for maximum horsepower and
torque, making them ideal for high-performance street and light duty racing
applications. They also feature high-quality lightweight valve springs and
heavy duty hardware for maximum lift and maintain the stock exhaust port
location. E-CNC cylinder heads are available for small-block Chevy, LS-series
Chevy, big-block Chevy and small-block Ford.

CAMSHAFT & VALVETRAIN

E-SERIES CYLINDER HEADS

POWER PACKAGES KITS

FULLY CNC PORTED HIGHPERFORMANCE DESIGNS

E-CNC #79949 for LS1/LS2 Chevy

E-Series Head for S/B Ford #5028

PLEASE REFER TO PAGE 212 FOR MORE INFORMATION REGARDING THE EMISSIONS GUIDE.

88

INDEX

l 50-STATE LEGAL l RACING ONLY l PRE-POLLUTION CONTROLLED VEHICLES l STOCK REPLACEMENT l ENGINE SWAP

SPORTSWEAR

EMISSIONS GUIDE

FUEL PUMPS

Glidden Victor SC-1 Pro-Port Raw #770769

NITROUS

Pro-Port Raw cylinder heads are specialty purpose-engineered castings

designed for the professional cylinder head porter and engine builder.
Features include extra-thick decks, under-sized intake and exhaust runners
and increased wall thickness to allow for custom CNC porting. The castings
are semi-machined with finished accessory, intake and exhaust flange bosses.
Optional HIP Processed castings available! This aerospace process results in
an incredibly strong and dense casting, see page 111 for more details.
Pro-Port heads are available for small-block Chevy, Chevy SB2 and ROX,
LS-series Chevy, big-block Chevy (conventional and spread-port), small-block
Ford (including SC-1), FE Ford and Pontiac.

ACCESSORIES

SERIOUS CASTINGS FOR

SERIOUS PROFESSIONALS

WATER PUMPS

PRO-PORT RAW CYLINDER HEADS

CRATE ENGINES

Victor Series cylinder heads are used by many of the best racers in the country
and are the best choice for all-out competition. Edelbrock engineers work with
leading racers like Billy Glidden, John Urist and Pat Musi to produce the ultimate
components for racing. The end results is competition ready cylinder heads that
feature race wining technology, Right-Out-of-the-Box. Victor Jr. cylinder heads
are compatible with OE valve train and pistons for bolt-on convenience while
Victor cylinder heads feature raised runners, revised chambers and relocated
valves for all-out competition. Victor Pro-Port CNC heads are fully CNC ported
versions of Victor heads if youre looking for maximum power.

EFI

VICTOR SERIES CYLINDER HEADS

SUPERCHARGERS

E-Series cylinder heads are a step up in affordable performance from our

E-Street line. They feature larger runners for increased airflow, revised
exhaust ports and larger diameter springs for higher lift camshafts, making
them ideal for a spec series racer and larger displacement engines. These
heads also have as-cast ports and maintain the stock exhaust port location,
making them compatible with OEM headers and hardware. E-Series cylinder
heads are available for small-block Chevy and small-block Ford.

Victor Jr. S/B Chevy #77619

MANIFOLDS GASKETS CYLINDER HEADS

PERFORMER RPM
CYLINDER HEADS

CARBURETORS
CYLINDER HEADS GASKETS MANIFOLDS
CAMSHAFT & VALVETRAIN
KITS POWER PACKAGES
SUPERCHARGERS
EFI

Port Volume
Intake / Exhaust Description
144cc / 77cc Performer Jeep 4.0L
AMC/Jeep
185cc / 70cc Performer
with exhaust crossover
RPM AMC/
185cc / 70cc Performer
Jeep no crossover
Performer RPM AMC
185cc / 70cc for NHRA Stock/Super
Stock only

WATER PUMPS
NITROUS

Valve
Max. Spring Emissions Install
Lift Diameter Code Notes
l

0.540"
1.26"

300-450 Standard Standard

54cc

2.02" / 1.60"

Flat Tappet

0.580"

1.55"

300-450 Standard Standard

54cc

2.02" / 1.60"

Flat Tappet

0.580"

1.55"

Standard Standard

54cc

MATCHING PARTS
Description
Page No.
Performer-Plus Camshaft ...................................121
Roller Timing Set...................................................127
Valve Springs ................................................117-118
Retainers ........................................................117-118
Fuel Pump ......................................................202-205
Signature Series Valve Covers ..........................188

IMPORTANT NOTES FOR PERFORMER & PERFORMER RPM FOR AMC/JEEP

Include adjustable rocker studs and guide plates for use with small-block Ford style adjustable 1.6:1 ratio rockers.
Intake flange is dual-drilled to accommodate early and late model intake bolt patterns, covering 1967-91.
Direct bolt-on for 1970-later engines with 1/2" head bolts, these heads include step-dowel pins for pre-1970 engines.
Their dual-quench combustion chambers produce approximately 9.5:1 compression in 401 V8 engines.
Features a 45 intake seat angle for improved mid- to high-lift flow over the stock 30 angle.
Use Edelbrock Step Washer Kit #9693 on 1967-69 engines with 7/16" head bolts.
Bare heads have valve guides and seats installed, but require final sizing and a valve job to match your valves.
Complete heads include larger-than-stock valve springs to handle most high-lift cams.
Deck thickness: 5/8", rocker stud diameter: 3/8", pushrod diameter: 5/16" (width of slot in guide plate).
Replacement valve part numbers are for sets of 8, Call Tech for individual valve part number.

Port Volume
Intake / Exhaust Description
215cc / 130cc Performer RPM Buick
RPM Buick for
215cc / 130cc Performer
NHRA Super Stock only

89

High Performance Zinc Additive and Break

In lubricants offer your engine the best
protection. See page 126 for more info.

Intake Exhaust
HP
Flange
Port Chamber Valve Sizes Camshaft
Range Style Location Volume Intake / Exhaust
Type
400-500 Standard Standard
68cc
2.125" / 1.75" Flat Tappet
Standard Standard

68cc

IMPORTANT NOTES
Include adjustable rocker stud and guide plate for use with small-block Chevy style adjustable 1.6:1 ratio rockers.
The large 68cc combustion chambers produce 9.2:1 compression ratio with stock pistons.
Bare heads have valve guides and seats installed, but require final sizing and a valve job to match your valves.
Deck thickness: 5/8", rocker stud diameter: 3/8", pushrod diameter: 3/8" (width of slot in guide plate).
Replacement valve part numbers are for sets of 8, call Tech for individual valve part number.

SPORTSWEAR

FUEL PUMPS

Intake Exhaust
HP
Flange
Port Chamber Valve Sizes Camshaft
Range Style Location Volume Intake / Exhaust
Type
200-300

Standard
55cc
1.91" / 1.50" Flat Tappet

IMPORTANT NOTES FOR PERFORMER JEEP 4.0L

Designed as a bolt-on performance upgrade for 1991-2006 Jeeps with a 4.0L inline six engine.
Will also fit on 1987-90 Jeep 4.0L engines and 1976-90 AMC 4.2L engines with no modification to the water jacket
when used with 1991-2006 intake manifold and 1991-98 or aftermarket exhaust header.
The Performer Jeep cylinder head features all-new better flowing intake/exhaust ports along with a modern
combustion chamber design and backcut and swirl polished valves for improved flow performance.
Retains the stock valve angle, pushrod length and valve cover bolt pattern for use with factory components and off
the shelf accessories.
Features larger reinforced rocker bosses for improved strength at high RPM and Heli-Coil threaded inserts in the
intake manifold bolt holes for added strength.
A 3/4" deck throughout the head also promotes stiffness and durability.
This cylinder head is machined to accept both distributor or coil pack ignition.
The Performer Jeep 4.0L is designed with 1991-98 port locations and must be used with the appropriate intake
manifold and header combination.
Pending 50-state emission legal for 4.0L engines when used with factory Fuel Injection components. Also pending
50-state emission legal for 4.2L engines when used with a Mopar Fuel Injection Conversion Kit (E.O. Number D-265-21).

BUICK 400-455 V8

INDEX

AMC/JEEP/BUICK

AMC/JEEP 4.0L INLINE SIX AND 343-401 V8

ACCESSORIES

CRATE ENGINES

CYLINDER HEADS

Valve
Max. Spring Emissions Install
Lift Diameter Code Notes
l

0.600"
1.55"

MATCHING PARTS
Description
Page No.
Roller Timing Set...................................................127
Valve Springs ................................................117-118
Retainers ........................................................117-118
Fuel Pump ......................................................202-205
Signature Series Valve Covers ..........................187

WWW.EDELBROCK.COM

#60129

#60139

#60109

#60119

#60107

Head Bolts
#8533
#8531 (Pre-1970)
#8532 (1970-Later)
#8531 (Pre-1970)
#8532 (1970-Later)
#8531 (Pre-1970)
#8532 (1970-Later)

HEADS

Head
Gasket
#7348

Intake
Gasket

Exhaust
Gasket
#7275

Valve
Cover
Gasket
#7583

Pushrods

#7329

#7213

#7239

#7532

#9637

#7329

#7213

#7239

#7532

#9637

#7329

#7213

#7239

#7532

#9637

Valves
(I) Intake
(E) Exhaust
Call Tech
#9765 (I)
#9766 (E)
#9765 (I)
#9766 (E)

Springs

Retainers

Spark
Plug
RC12YC

#5792

#9644

RC12YC

#5792

#9644

RC12YC

RC12YC

MANIFOLDS GASKETS CYLINDER HEADS

Bare Complete
(Single) (Single)
#50159
#50169

CARBURETORS

AMC/JEEP/BUICK CYLINDER

CAMSHAFT & VALVETRAIN

E.O. Number Pending

POWER PACKAGES KITS

Performer Jeep 4.0L

SUPERCHARGERS
CRATE ENGINES

Edelbrock Cylinder Heads

are Designed, Cast and
Assembled in the USA for
Unsurpassed Quality.

#60037

Head Bolts
#8503

Head
Gasket
#7346

Intake
Gasket
#7246

Exhaust
Gasket
#7247

Valve
Cover
Gasket
#7546

#8503

#7346

#7246

#7247

#7546

Pushrods
#9605

Valves
(I) Intake
(E) Exhaust
Call Tech

Springs
#5792

Retainers
#9644

Spark
Plug
RC12YC

#9605

RC12YC

ACCESSORIES

Complete
(Single)
#60049

WATER PUMPS

Bare
(Single)
#60039

EFI

Performer RPM AMC for

NHRA Stock/Super Stock

Performer RPM AMC/Jeep

Performer AMC/Jeep

NITROUS
FUEL PUMPS

EMISSIONS GUIDE

PLEASE REFER TO PAGE 212 FOR MORE INFORMATION REGARDING THE EMISSIONS GUIDE.

90

INDEX

l 50-STATE LEGAL l RACING ONLY l PRE-POLLUTION CONTROLLED VEHICLES l STOCK REPLACEMENT l ENGINE SWAP

SPORTSWEAR

Performer RPM Buick #60049

CARBURETORS

SMALL-BLOCK CHEVY

CHEVROLET 262-400 V8

170cc / 70cc E-Tec 170

350-450 Vortec

Standard Straight

64cc

1.94" / 1.55"

170cc / 70cc E-Tec 170

350-450 Vortec

Standard Straight

64cc

185cc / 60cc E-Street

185cc / 60cc E-Street

300-400 Standard Standard Straight

300-400 Standard Standard Straight

185cc / 65cc Performer

1.46"

A,C,E

0.575"

1.46"

A,C,E

Hyd. Roller

0.575"

1.46"

A,C,E

1.94" / 1.55"

Flat Tappet

0.575"

1.46"

A,C,E

64cc
70cc

2.02" / 1.60"
2.02" / 1.60"

Flat Tappet
Flat Tappet

0.550"
0.550"

1.46"
1.46"

l
l

A,E
A,E

300-450 Standard Standard Straight

70cc

2.02" / 1.60"

Flat Tappet

0.575"

1.46"

A,C,E,G

185cc / 65cc Performer

300-450 Standard Standard Straight

64cc

2.02" / 1.60"

Flat Tappet

0.575"

1.46"

A,E,G

RPM for
185cc / 65cc Performer
SCCA
RPM for
185cc / 65cc Performer
NHRA Super Stock
RPM for
185cc / 65cc Performer
NHRA Super Stock
RPM for
185cc / 65cc Performer
NHRA Super Stock
RPM for
185cc / 65cc Performer
NHRA Super Stock

350-475 Standard Standard Straight

64cc

1.94" / 1.55"

Standard Standard Angled

64cc

Standard Standard Straight

64cc

Standard Standard Angled

70cc

Standard Standard Straight

70cc

185cc / 75cc E-CNC 185

400-500 Standard Standard Straight

64cc

2.02" / 1.60"

Hyd. Roller

0.575"

1.46"

A,C,E

185cc / 75cc E-CNC 185

400-500 Standard Standard Straight

64cc

2.02" / 1.60"

Flat Tappet

0.575"

1.46"

A,C,E

195cc / 65cc Performer RPM

350-450 Standard Standard Angled

70cc

2.02" / 1.60"

Hyd. Roller

0.575"

1.46"

A,C,E

195cc / 65cc Performer RPM

350-450 Standard Standard Straight

70cc

2.02" / 1.60"

Hyd. Roller

0.575"

1.46"

A,C,E

195cc / 65cc Performer RPM

350-450 Standard Standard Angled

64cc

2.02" / 1.60"

Hyd. Roller

0.575"

1.46"

A,C,E

195cc / 65cc Performer RPM

350-450 Standard Standard Straight

64cc

2.02" / 1.60"

Hyd. Roller

0.575"

1.46"

A,C,E

195cc / 65cc Performer RPM

350-450 Standard Standard Angled

70cc

2.02" / 1.60"

Flat Tappet

0.575"

1.46"

A,C,E

195cc / 65cc Performer RPM

350-450 Standard Standard Straight

70cc

2.02" / 1.60"

Flat Tappet

0.575"

1.46"

A,C,E

195cc / 65cc Performer RPM

350-450 Standard Standard Angled

64cc

2.02" / 1.60"

Flat Tappet

0.575"

1.46"

A,C,E

195cc / 65cc Performer RPM

350-450 Standard Standard Straight

64cc

2.02" / 1.60"

Flat Tappet

0.575"

1.46"

A,C,E

CHEVROLET 262-400 CONTINUED NEXT PAGE...

INDEX

SPORTSWEAR

FUEL PUMPS

NITROUS

ACCESSORIES

SUPERCHARGERS

KITS POWER PACKAGES

CAMSHAFT & VALVETRAIN

0.575"

EFI

Valve
Max. Spring Emissions Install
Lift Diameter Code Notes

CRATE ENGINES

Intake Exhaust
Port Volume
HP Flange
Port
Plug Chamber Valve Sizes Camshaft
Intake / Exhaust Description
Range Style Location Type Volume Intake / Exhaust
Type
Performer
Centerbolt
165cc / 65cc (1987-95)
250-425 Standard Standard Straight 60cc
2.02" / 1.60" Flat Tappet
Centerbolt
165cc / 65cc Performer
60cc
2.02" / 1.60" Flat Tappet
(1986-91) 5.7L Corvette 250-425 Standard Standard

WATER PUMPS

CYLINDER HEADS GASKETS MANIFOLDS

CYLINDER HEADS

Edelbrock Cylinder Heads

are Designed, Cast and
Assembled in the USA for
Unsurpassed Quality.
APPLICATION SPECIFIC INSTALLATION FOOTNOTES
(A) Deck thickness: 5/8", rocker stud diameter: 3/8",
pushrod diameter: 5/16" (width of slot in guide plate)
(B) Deck thickness: 5/8", rocker stud diameter: 7/16",
pushrod diameter: 5/16" (width of slot in guide plate)

91

(C) Bare heads will have valve guides and seats

installed, but will require final sizing and a valve job
to match the valves you will be using
(D) Edelbrock pushrods #9632 are recommended

(E) Requires hardened pushrods

(F) Pedestal mount rockers
(G) When using hot air choke Q-Jet carbs,
choke kit #1932 is required

WWW.EDELBROCK.COM

HEADS

Pushrods

#5767

#9736

RC12YC

#5767

#9736

RC12YC

#5845

#9736

RC12YC

#5767

#9736

RC12YC

#5767
#5767

#9736
#9736

RC12YC
RC12YC

#5825

#9741

RC12YC

#5825

#9741

RC12YC

RC12YC

RC12YC

See Instructions

RC12YC

#7549

See Instructions

RC12YC

#7204

#7549

See Instructions

RC12YC

#7201

#7204

#7549

See Instructions

#5845

#9736

RC12YC

#8550 #7310

#7201

#7204

#7549

See Instructions

#5825

#9741

RC12YC

SUPERCHARGERS

#607115

#8550 #7310

#7201

#7204

#7549

See Instructions

#5845

#9736

RC12YC

EFI

#60735

#607315

#8550 #7310

#7201

#7204

#7549

See Instructions

#5845

#9736

RC12YC

#60995

#8550 #7310

#7201

#7204

#7549

See Instructions

#5845

#9736

RC12YC

#60889

#60895

#608915

#8550 #7310

#7201

#7204

#7549

See Instructions

#5845

#9736

RC12YC

CRATE ENGINES

#60859

#8550

#7204

#7549

See Instructions

#60869

#60879

#8550

#7204

#7549

See Instructions

#60959

#60975

#609715

#8550 #7310

#7235

#7204

#7549

See Instructions

#60959

#60979

#609719

#8550 #7310

#7235

#7204

#7549

See Instructions

#5089
#5073

#50899
#50739

#8550 #7310
#8550 #7310

#7201
#7201

#7204
#7204

#7549
#7549

#9630
#9630

#60659

#60759

#8550 #7310

#7201

#7204

#7549

See Instructions

#60909

#8550 #7310

#7201

#7204

#7549

See Instructions

#608879

#608979

#8550 #7310

#7201

#7204

#7549

See Instructions

#60947

#8550 #7310

#7201

#7204

#7549

See Instructions

#60887

#8550 #7310

#7201

#7204

#7549

#60617

#8550 #7310

#7201

#7204

#60637

#8550 #7310

#7201

#79889

#79895

#8550 #7310

#79889

#79899

#60619

#60715

#60639

#60949

Spark
Plug

#60619

#60719

#8550 #7310

#7201

#7204

#7549

See Instructions

#5825

#9741

RC12YC

#60639

#60739

#607319

#8550 #7310

#7201

#7204

#7549

See Instructions

#5825

#9741

RC12YC

#60949

#60999

#609919

#8550 #7310

#7201

#7204

#7549

See Instructions

#5825

#9741

RC12YC

#60889

#60899

#608919

#8550 #7310

#7201

#7204

#7549

See Instructions

#5825

#9741

RC12YC

WATER PUMPS
ACCESSORIES

#9765 (I)
#9766 (E)
#9765 (I)
#9766 (E)
#9765 (I)
#9766 (E)
#9765 (I)
#9766 (E)
#9765 (I)
#9766 (E)
#9765 (I)
#9766 (E)
#9765 (I)
#9766 (E)
#9765 (I)
#9766 (E)
#9765 (I)
#9766 (E)
#9765 (I)
#9766 (E)

POWER PACKAGES KITS

#60849

Springs Retainers

CAMSHAFT & VALVETRAIN

Valves
(I) Intake
(E)Exhaust
#9765 (I)
#9766 (E)
#9765 (I)
#9766 (E)
#9779 (I)
#9773 E)
#9779 (I)
#9773 (E)
Call Tech
Call Tech
#9765 (I)
#9766 (E)
#9765 (I)
#9766 (E)
#9779 (I)
#9773 (E)

MANIFOLDS GASKETS CYLINDER HEADS

Complete
Complete
w/Valves
(Single)
Valve
Complete Bare
Only Complete Polished Head Head Intake Exhaust Cover
(Pair) (Single) (Single) (Single) Finish Bolts Gasket Gasket Gasket Gasket

CARBURETORS

SMALL-BLOCK CHEVY CYLINDER

NITROUS

Performer RPM #60735

PLEASE REFER TO PAGE 212 FOR MORE INFORMATION REGARDING THE EMISSIONS GUIDE.

92

INDEX

l 50-STATE LEGAL l RACING ONLY l PRE-POLLUTION CONTROLLED VEHICLES l STOCK REPLACEMENT l ENGINE SWAP

SPORTSWEAR

EMISSIONS GUIDE

SCCA RPM #608979

FUEL PUMPS

E-Street #5089

CARBURETORS

S/B, LT1/LT4 CHEVY

Valve
Max. Spring Emissions Install
Lift Diameter Code Notes

2.02" / 1.60"

Hyd. Roller

0.575"

1.46"

ll

A,C,E

64cc

2.02" / 1.60"

Flat Tappet

0.575"

1.46"

ll

A,C,E

400-550 Standard Standard Straight

64cc

2.08" / 1.60"

Hyd. Roller

0.650"

1.55"

ll

A,C,E

210cc / 75cc E-Series E-210

400-550 Standard Standard Straight

64cc

2.08" / 1.60"

Flat Tappet

0.575"

1.46"

ll

A,C,E

215cc / 85cc Victor Jr. 23

450-550 Standard

+.125

Angled

64cc

2.08" / 1.60"

Hyd. Roller

0.650"

1.55"

C,E

215cc / 85cc Victor Jr. 23

450-550 Standard

+.125

Angled

64cc

2.08" / 1.60"

Mech. Roller 0.670"

1.55"

C,E

Victor Jr. 23
215cc / 85cc (Add your own
springs)

450-550 Standard

+.125

Angled

64cc

2.08" / 1.60"

1.55"

C,E

215cc / 85cc Victor Jr. 23

450-550 Standard

+.125

Angled

70cc

2.08" / 1.60"

Hyd. Roller

0.650"

1.55"

C,E

215cc / 85cc Victor Jr. 23

450-550 Standard

+.125

Angled

70cc

2.08" / 1.60"

Mech. Roller 0.670"

1.55"

C,E

220cc / 85cc Victor Jr. 23

450-500 Standard

+.300

Angled

64cc

2.10" / 1.60"

0.630"

1.55"

C,E

220cc / 85cc Victor Jr. 23

450-600 Standard

+.300

Angled

64cc

2.10" / 1.60"

Mech. Roller 0.700"

1.55"

C,E

225cc / 88cc
225cc / 88cc
260cc / 88cc
260cc / 88cc
275cc / 88cc
300cc / 88cc

500-600
500-600
500-650
500-650
550-700
600-800

+.200
+.200
+.200
+.200
+.200
+.250

Angled
Angled
Angled
Angled
Angled
Angled

68cc
68cc
68cc
68cc
68cc
68cc

2.10" / 1.60"
2.10" / 1.60"
2.14" / 1.60"
2.14" / 1.60"
2.17" / 1.60"
2.20" / 1.60"

Mech. Roller
Hyd. Roller
Hyd. Roller
Mech. Roller
Mech. Roller
Mech. Roller

1.58"
1.34"
1.57"
1.57"
1.57"
1.57"

ll
ll
ll
ll
ll
ll

INDEX

SPORTSWEAR

FUEL PUMPS

NITROUS

ACCESSORIES

WATER PUMPS

CRATE ENGINES

EFI

CAMSHAFT & VALVETRAIN

Camshaft
Type

KITS POWER PACKAGES

CHEVROLET 262-400 V8 (CONTINUED)

SUPERCHARGERS

CYLINDER HEADS GASKETS MANIFOLDS

CYLINDER HEADS

Port Volume
Intake / Exhaust Description

HP
Range

Intake Exhaust
Flange
Port
Style Location

200cc / 80cc E-Tec 200

350-500

Vortec

Standard Straight

64cc

200cc / 80cc E-Tec 200

350-500

Vortec

Standard Straight

210cc / 75cc E-Series E-210

E-CNC
E-CNC
E-CNC
E-CNC
E-CNC
E-CNC

Standard
Standard
Standard
Standard
Standard
Standard

Plug
Type

Chamber Valve Sizes

Volume Intake / Exhaust

Hyd. Roller

0.700"
0.680"
0.730"
0.730"
0.730"
0.730"

IMPORTANT NOTES
To use stock rockers on small-block Chevy heads, .100" longer than stock pushrods are required.
Edelbrock pushrods #9629 are recommended for use with flat tappet cams only.
S/B Chevy heads may not be used on engines with less than 4" bore (262, 265, 267, 283, 305, 307 c.i.d.) except with
cams having less than .450" valve lift.
Replacement valve part numbers are for sets of 8, Call Tech for individual valve part number.
E-Series #5087

CHEVROLET LT1/LT4 V8
Port Volume
Intake / Exhaust Description
170cc / 60cc Performer LT1
170cc / 60cc Performer LT1 for NHRA
Super Stock only
195cc / 75cc RPM LT4 195

Max
HP
Level
300-450
350-475

Exhaust
Port Chamber Valve Sizes Camshaft
Location Volume Intake / Exhaust
Type
Standard 54cc
1.94" / 1.55" Hyd. Roller

Valve
Max. Spring Emissions Install
Lift Diameter Code Notes
l
0.600"
1.46"
A,C

Standard

54cc

A,C

Standard

54cc

2.02" / 1.57"

Hyd. Roller

0.600"

1.30"

A,C,E

IMPORTANT NOTES
Designed for 1992-97 LT1 engines and feature factory style self-aligning rockers and centerbolt valve covers.
Compatible with stock or aftermarket exhaust manifolds and headers.

Performer LT1 #61905

INSTALLATION NOTES
(A) Deck thickness: 5/8", rocker stud diameter: 3/8",
pushrod diameter: 5/16" (width of slot in guide plate)
(B) Deck thickness: 5/8", rocker stud diameter: 7/16",
pushrod diameter: 5/16" (width of slot in guide plate)

93

(C) Bare heads will have valve guides and seats

installed, but will require final sizing and a valve job
to match the valves you will be using
(D) Edelbrock pushrods #9632 are recommended

(E) Requires hardened pushrods

(F) Pedestal mount rockers
(G) When using hot air choke Q-Jet carbs,
choke kit #1932 is required

WWW.EDELBROCK.COM

CARBURETORS

S/B, LT1/LT4 CHEVY CYLINDER

HEADS

#60985

#609815

#8550 #7310

#7215

#7204

#60969

#60989

#609819

#8550 #7310

#7215

#7204

#5086

#5087

#8550 #7310 FelPro FelPro

#5086

#5085

#8550 #7310 FelPro FelPro

#77569

#77589

#8550 FelPro FelPro FelPro

#77569

#77599

#8550 FelPro FelPro FelPro

#77569

#77579

#8550 FelPro FelPro FelPro

#77639

#77619

#8550 FelPro FelPro FelPro

#77639

#77629

#8550 FelPro FelPro FelPro

#61249

#61255

#8550 FelPro FelPro FelPro

#61249

#61259

#8550 FelPro FelPro FelPro

#61229

#61209
#61205
#61215
#61219

#61239

#7549

See
#9785 (I)
Instructions #9787 (E)

See
Instructions
See
#7549
Instructions
See
#7549
Instructions
See
#7549
Instructions

#7549

NA

#9715

#5821

#9715

#5823

#9715

#5768

#5740

#9785 (I)
#9787 (E)
#9785 (I)
#9787 (E)

EFI

SUPERCHARGERS

#60969

POWER PACKAGES KITS

CAMSHAFT & VALVETRAIN

Valves
(I) Intake
Spark
Pushrods (E)Exhaust Springs Retainers Plug
See
#9765 (I)
#7549
#5845
#9736 RC12YC
Instructions #9766 (E)
See
#9765 (I)
#7549
#5825
#9741 RC12YC
Instructions #9766 (E)
See
#7549
Call Tech #5821
#9715 RC12YC
Instructions
See
#7549
Call Tech #5825
#9741 RC12YC
Instructions
See
#9785 (I)
#7549
#5821
#9715

Instructions #9787 (E)

See
#9785 (I)
#7549
#5823
#9715

Instructions #9787 (E)

MANIFOLDS GASKETS CYLINDER HEADS

Complete
Complete
w/Valves
(Single)
Valve
Bare Complete Bare
Only Complete Polished Head Head Intake Exhaust Cover
(Pair) (Pair) (Single) (Single) (Single) Finish Bolts Gasket Gasket Gasket Gasket

CRATE ENGINES

Head Bolts
#8550

Head
Gasket
#7342

Intake
Gasket
#7243

Exhaust
Gasket
#7248

Valve
Cover
Gasket

Pushrods
See Instructions

Valves
(I) Intake
(E) Exhaust

Springs
#5767

Retainers
#9736

Spark
Plug
RC12YC

#61917

#8550

#7342

#7244

#7248

RC12YC

#61929

#61939

#8550

#7342

#7244

#7248

See Instructions

#5768

#9757

RC12YC

NITROUS

IMPORTANT NOTES FOR RPM LT4 CYLINDER HEADS

Designed for 1996 LT4 (or) 1992-97 LT1 small-block Chevy engines.
LT4 cylinder heads are fully CNC ported for improved airflow and peak performance.
Features high-quality 8mm stem stainless steel intake and exhaust valves with high flow intake and exhaust ports.
High-quality conical beehive springs are secured with steel retainers and valve locks.
Equipped with guide plates and 8mm stem valves, adjustable (non self-aligning) rocker arms are required.
Accept factory centerbolt valve covers.

FUEL PUMPS

Performer LT4 #61939

PLEASE REFER TO PAGE 212 FOR MORE INFORMATION REGARDING THE EMISSIONS GUIDE.

94

INDEX

l 50-STATE LEGAL l RACING ONLY l PRE-POLLUTION CONTROLLED VEHICLES l STOCK REPLACEMENT l ENGINE SWAP

SPORTSWEAR

Edelbrock Cylinder Heads

are Designed, Cast and
Assembled in the USA for
Unsurpassed Quality.

EMISSIONS GUIDE

ACCESSORIES

Bare Complete
(Single) (Single)
#61919
#61905

E-CNC #79895

WATER PUMPS

Victor Jr. #77629

CARBURETORS
CYLINDER HEADS GASKETS MANIFOLDS
CAMSHAFT & VALVETRAIN
KITS POWER PACKAGES
SUPERCHARGERS
EFI
CRATE ENGINES
WATER PUMPS

Port Volume
Intake / Exhaust Description

Exhaust
Max
Port
HP Location Chamber Valve Sizes
Level To Stock Volume Intake / Exhaust

Camshaft
Type

Valve
Max. Spring Emissions Install
Lift Diameter Code Notes

215cc / 76cc E-CNC 215 (Gen III&IV LS1/LS2)

400-500 Standard

65cc

2.02" / 1.57"

Hyd. Roller

0.600"

1.30"

230cc / 80cc E-CNC 230 (4-bolt flange) LS3

400-500 Standard

69cc

2.135" / 1.55"

Hyd. Roller

0.680"

1.30"

230cc / 80cc E-CNC 230 (6-bolt flange) LS3

450-550 Standard

69cc

2.135" / 1.55"

Hyd. Roller

0.680"

1.30"

IMPORTANT NOTES FOR E-CNC 215

Designed for 1997 & later Gen III & IV LS1/LS2 Chevy engines including 4.8L, 5.3L, 5.7L & 6.0L.
E-CNC heads feature fully CNCd intake ports, combustion chambers and exhaust ports for improved air-flow.
Dyno tests proved these heads are capable of 457 hp & 438 ft-lbs. of torque.
Includes high-quality conical beehive springs secured with steel retainers and valve locks for up to .600 valve lift.
Rocker bolt kit #8597 includes 8 rocker bolts that are shorter than stock to prevent the bolts from protruding into
the intake ports.
Deck thickness: 5/8", pushrod diameter: 5/16".
E-CNC 215 #79949

CHEVROLET 348/409 W-SERIES V8

Port Volume
Intake / Exhaust Description

Exhaust
Max
Port
HP Location Chamber Valve Sizes
Level To Stock Volume Intake / Exhaust

Camshaft
Type

Valve
Max. Spring Emissions Install
Lift Diameter Code Notes

220cc / 115cc Performer RPM

400-600 Standard

16cc

2.19" / 1.72"

Hyd. Roller

0.600"

1.55"

220cc / 115cc Performer RPM

400-600 Standard

16cc

2.19" / 1.72"

Flat Tappet

0.600"

1.55"

IMPORTANT NOTES
Designed for 1958-1965 Chevrolet W series 348/409 big-block engines.
Features original port locations and valve angles for bolt-on convenience.
CNC port matched intake and exhaust ports with an improved design for optimum flow and performance.
1958 348 c.i.d. applications will require modifications (contact Edelbrock tech department for detailed information).
May be used on 348 engines with valve lifts up to .550" only.
Bare heads will have valve guides and seats installed, but will require final sizing and a valve job to match the valves you will be using.
Will only fit 1958-65 348 c.i.d. "W" engines if an Edelbrock #5409, #7159 or stock large port 409 c.i.d. manifold is used.
Proper cylinder wall notching must be checked to ensure exhaust valve to cylinder clearance.
Deck thickness: 9/16", rocker stud diameter: 7/16", pushrod diameter: 3/8" (width of slot in guide plate).
Replacement valve part numbers are for sets of 8, Call Tech for individual valve part number.

CHEVROLET 396-502 V8

NITROUS
FUEL PUMPS

Port Volume
Intake / Exhaust
290cc / 110cc
290cc / 110cc
290cc / 110cc
290cc / 110cc
290cc / 110cc

290cc/ 110cc

290cc / 110cc

INDEX

LS, W-SERIES & B/B CHEVY

CHEVROLET LS1/LS2/LS3 V8

SPORTSWEAR

ACCESSORIES

CYLINDER HEADS

290cc / 110cc

290cc/ 110cc

Description
E-Street
Performer 454-O
Performer RPM 454-O
Performer RPM 454-O
Performer RPM 454-O for
NHRA Super Stock only
Performer
High Compression 454-O
Performer RPM
High Compression 454-O
Performer RPM
High Compression 454-O
Performer RPM 454-O
Marine

Max Intake Exhaust

HP
Port
Port Chamber Valve Sizes
Level Style Location Volume Intake / Exhaust
400-500 Oval Standard 110cc
2.19" / 1.88"
450-550 Oval Standard 110cc
2.19" / 1.88"
450-550 Oval Standard 110cc
2.19" / 1.88"
500-600 Oval Standard 110cc
2.19" / 1.88"

Camshaft
Type
Flat Tappet
Flat Tappet
Hyd. Roller
Flat Tappet

Valve
Max. Spring Emissions Install
Lift Diameter Code Notes
ll
0.700"
1.50"
A,B
l
0.700"
1.50"
A,B
ll
0.700"
1.50"
A,B
ll
0.700"
1.50"
A,B

Oval

Standard

110cc

A,B

400-500

Oval

Standard

100cc

2.19" / 1.88"

Flat Tappet

0.700"

1.50"

A,B

500-600

Oval

Standard

100cc

2.19" / 1.88"

Hyd. Roller

0.700"

1.50"

ll

A,B

500-600

Oval

Standard

100cc

2.19" / 1.88"

Flat Tappet

0.700"

1.50"

ll

A,B

525-650

Oval

Standard

110cc

2.25" / 1.89"

CHEVROLET 396-502 CONTINUED NEXT PAGE...

95

WWW.EDELBROCK.COM

#79939

#79949

#61319

#61329

Head
Bolts
#8596 (Gen III)
#8595 (Gen IV)
#8596 (Gen III)
#8595 (Gen IV)
#8596 (Gen III)
#8595 (Gen IV)

Head
Gasket
#7388 (LS1)
#7387 (LS2)
#7388 (LS1)
#7387 (LS2)
#7388 (LS1)
#7387 (LS2)

Valve
Cover
Gasket

Pushrods

Valves
(I) Intake
(E) Exhaust

Springs

Retainers

Spark
Plug

#7386

See Instructions

Call Tech

#5768

#9707

RC12YC

See Instructions

Call Tech

#5768

#9707

RC12YC

See Instructions

Call Tech

#5768

#9707

RC12YC

Like all of our other E-CNC cylinder heads, these

feature fully CNC'd intake ports, combustion chambers
and exhaust ports for improved performance.
Compatible with stock style rocker arms.
Features an exhaust port that has been raised 0.125"
as well as raised spring pockets that have been
machined 0.200" for use with longer valves.
The valve angle has been rolled to 13.25 and the spark
plug position has also been changed for improved
combustion and efficiency over a stock head.

Head
Bolts

Head
Gasket

Intake
Gasket

Exhaust
Gasket

Valve
Cover
Gasket

#60815

#8581

#7359

#7240

#7241

#7582

#60809

#60819

#8581

#7359

#7240

#7241

#7582

Springs

Retainers

Spark
Plug

#93781 (I) #93783 (E)

#5821

#9715

RC12YC

#93781 (I) #93783 (E)

#5792

#9715

RC12YC

SUPERCHARGERS

#60809

Pushrods
#9635
#9648
#9635
#9648

Valves
(I) Intake
(E) Exhaust

POWER PACKAGES KITS

Bare Complete
(Single) (Single)

Exhaust
Gasket

CAMSHAFT & VALVETRAIN

IMPORTANT NOTES FOR LS3 CYLINDER HEADS

E-CNC LS3 cylinder heads are a great generalpurpose high performance cylinder head for any
street- strip LS engine.
These cylinder heads have a high velocity port
compared to stock LS3 cylinder heads, making them
an ideal upgrade for any cathedral port or
3.89" bore LS application.
They feature an improved design and casting that
gives cylinder head porters more material to work
with compared to stock heads.

Intake
Gasket

MANIFOLDS GASKETS CYLINDER HEADS

Bare Complete
(Single) (Single)

CARBURETORS

CYLINDER HEADS

LS, W-SERIES & B/B CHEVY

EFI
CRATE ENGINES

Head deck #60819

W-Series head #60819

Valve
Cover
Gasket
#7580
#7580
#7580
#7580

Pushrods
See Instructions
See Instructions
See Instructions
See Instructions

Valves
(I) Intake
(E) Exhaust
Call Tech
#9775 (I) #9776 (E)
#9775 (I) #9776 (E)
#9775 (I) #9776 (E)

Spark
Springs Retainers Plug
#5745
#9602 RC12YC
#5745
#9602 RC12YC
#5823
#9602 RC12YC
#5745
#9602 RC12YC

#8551 #7302

#7203

#7205

#7580 See Instructions

RC12YC

#60489

#60499

#8551 #7302

#7203

#7205

#7580 See Instructions

#9775 (I) #9776 (E)

#5745

#9602

RC12YC

#60429

#60435

#8551 #7302

#7203

#7205

#7580 See Instructions

#9775 (I) #9776 (E)

#5823

#9602

RC12YC

#60429

#60439

#8551 #7302

#7203

#7205

#7580 See Instructions

#9775 (I) #9776 (E)

#5745

#9602

RC12YC

#61459

#8551 #7302

#7203

#7205

#7580 See Instructions #97041 (I) #9788 (E)

RC12YC

EMISSIONS GUIDE

PLEASE REFER TO PAGE 212 FOR MORE INFORMATION REGARDING THE EMISSIONS GUIDE.

96

INDEX

l 50-STATE LEGAL l RACING ONLY l PRE-POLLUTION CONTROLLED VEHICLES l STOCK REPLACEMENT l ENGINE SWAP

SPORTSWEAR

FUEL PUMPS

#60447

NITROUS

ACCESSORIES

Exhaust
Gasket
#7205
#7205
#7205
#7205

WATER PUMPS

Bare
Complete
With
(Single)
Valves
Bare Complete Polished Head Head Intake
(Single) (Single) (Single)
Finish Bolts Gasket Gasket

#50449
#50459

#8551 #7302 #7203

#60469
#60479
#604719 #8551 #7302 #7203

#60449
#60455
#604515 #8551 #7302 #7203

#60449
#60459
#604519 #8551 #7302 #7203

CARBURETORS

BIG-BLOCK CHEVY

CHEVROLET 396-502 V8 (CONTINUED)

Port Volume
Intake / Exhaust Description

Max
HP
Level

315cc / 110cc Performer RPM 454-R

525-650

Rect

Standard

118cc

315cc / 110cc Performer RPM 454-R

525-650

Rect

Standard

Rect

Valve
Max. Spring Emissions Install
Lift Diameter Code Notes

2.19" / 1.88"

Hyd. Roller

0.700"

1.55"

ll

A,B

118cc

2.19" / 1.88"

Flat Tappet

0.700"

1.50"

ll

A,B

Standard

118cc

A,B

500-600

Rect

Standard

118cc

2.25" / 1.89"

0.700"

1.55"

315cc / 110cc Performer RPM 454-R Marine

500-600

Rect

Standard

118cc

2.25" / 1.89"

Hyd. Roller

0.650"

1.50"

326cc-303cc /
129cc
326cc-303cc /
129cc
348cc-355cc /
145cc
354cc-334cc /
129cc
348cc-355cc /
145cc
354cc-334cc /
129cc

E-CNC 325

550-700

Oval

Standard

110cc

2.25" / 1.88"

Hyd. Roller

0.700"

1.55"

ll

E-CNC 325

550-700

Oval

Standard

110cc

2.25" / 1.88"

Flat Tappet

0.700"

1.50"

ll

E-CNC 355

550-750

Rect

Standard

108cc

2.30" / 1.88"

Hyd. Roller

0.700"

1.55"

lll

E-CNC 355

550-750

Rect

Standard

118cc

2.30" / 1.88"

Hyd. Roller

0.700"

1.55"

lll

E-CNC 355

550-750

Rect

Standard

108cc

2.30" / 1.88"

Flat Tappet

0.700"

1.50"

lll

E-CNC 355

550-750

Rect

Standard

118cc

2.30" / 1.88"

Flat Tappet

0.700"

1.50"

lll

300cc / 129cc Victor Jr. 24

600-800

Rect

+.500"

106cc

2.25" / 1.90"

Hyd. Roller

0.700"

1.55"

300cc / 129cc Victor Jr. 24

650-800

Rect

+.500"

118cc

2.25" / 1.90"

Hyd. Roller

0.700"

1.55"

300cc / 129cc Victor Jr. 24

600-800

Rect

+.500"

106cc

2.25" / 1.90"

Flat Tappet

0.700"

1.50"

300cc / 129cc Victor Jr. 24

600-800

Rect

+.500"

118cc

2.25" / 1.90"

Flat Tappet

0.700"

1.50"

300cc / 129cc Victor Jr. 24

600-800

Rect

+.500"

118cc

2.25" / 1.90"

Mech. Roller 0.880"

1.635"

340cc / 128cc Victor 24

650-850

Rect

+.500"

119cc

2.30" / 1.90"

Hyd. Roller

0.700"

1.55"

340cc / 128cc Victor 24

650-850

Rect

+.500"

119cc

2.30" / 1.90"

Flat Tappet

0.700"

1.50"

340cc / 128cc Victor 24

700-850

Rect

+.500"

119cc

2.30" / 1.90"

Mech. Roller 0.880"

1.635"

377cc / 128cc Edelbrock/Musi 24 CNC

600-900

Rect

+.500"

119cc

2.30" / 1.90"

Mech. Roller 0.880"

1.635"

INDEX

SPORTSWEAR

FUEL PUMPS

NITROUS

ACCESSORIES

WATER PUMPS

KITS POWER PACKAGES

CAMSHAFT & VALVETRAIN

315cc / 110cc Performer RPM 454-R Marine

SUPERCHARGERS

Camshaft
Type

EFI

RPM 454-R for

315cc / 110cc Performer
NHRA Stock/Super Stock only

Intake Exhaust
Port
Port Chamber Valve Sizes
Style Location Volume Intake / Exhaust

CRATE ENGINES

CYLINDER HEADS GASKETS MANIFOLDS

CYLINDER HEADS

IMPORTANT NOTES
All Performer and Performer RPM B/B Chevy heads have spark plugs relocated
closer to center of bore which will interfere with high-dome pistons for open
chamber heads. Use pistons designed for our heads.
Replacement valve part numbers are for sets of 8, Call Tech for individual valve
part number.

INSTALLATION NOTES
(A) Deck thickness: 9/16", rocker stud diameter: 7/16", pushrod diameter: 3/8"
(width of slot in guide plate)
(B) Bare heads will have valve guides and seats installed, but will require
final sizing and a valve job to match the valves you will be using

Edelbrock Cylinder Heads

are Designed, Cast and
Assembled in the USA for
Unsurpassed Quality.
Marine-Duty Performer RPM #61559

97

WWW.EDELBROCK.COM

CYLINDER HEADS

Head
Bolts

Head
Gasket

Intake
Gasket

Exhaust
Gasket

Valve
Cover
Gasket

#7202

#7205

#7580

#60549

#60559

#605519

#8551

#7302

#7202

#7205

#7580

#60547

#8551

#7302

#7202

#7205

#7580

#61559

#8551

#7302

#7203

#7205

#7580

#61555

#8551

#7302

#7202

#7205

#7580

#79449

#79455

#8551

#7302

#7303

#7205

#7580

#79449

#79459

#8551

#7302

#7303

#7205

#7580

#79529

#79535

#8551

#7302

#7202

#7205

#7580

#79549

#79555

#8551

#7302

#7202

#7205

#7580

#79529

#79539

#8551

#7302

#7202

#7205

#7580

#79549

#79559

#8551

#7302

#7202

#7205

#7580

#77485

#8554

FelPro

FelPro

FelPro

#7580

#77469

#77475

#8554

FelPro

FelPro

FelPro

#7580

#77489

#8554

FelPro

FelPro

FelPro

#7580

#77469

#77479

#8554

FelPro

FelPro

FelPro

#7580

#77469

#77459

#8554

FelPro

FelPro

FelPro

#7580

#77419

#77425

#8554

FelPro

FelPro

FelPro

#7580

#77419

#77429

#8554

FelPro

FelPro

FelPro

#7580

#77419

#77409

#8554

FelPro

FelPro

FelPro

#7580

#61419

#61409

#8554

FelPro

FelPro

FelPro

#7580

WATER PUMPS

#7302

CRATE ENGINES

#8551

EFI

#605515

SUPERCHARGERS

#60555

POWER PACKAGES KITS

#60549

CAMSHAFT & VALVETRAIN

Valves
(I) Intake
Spark
Pushrods (E) Exhaust Springs Retainers Plug
See
#9775 (I)
#5823
#9602
RC12YC
Instructions #9776 (E)
See
#9775 (I)
#5745
#9602
RC12YC
Instructions #9776 (E)
See

RC12YC
Instructions
See
#97041 (I)

RC12YC
Instructions #9788 (E)
See
#97041 (I)
#5745
#9602
RC12YC
Instructions #9788 (E)
See
#97041 (I)
#5823
#9602
RC12YC
Instructions #9776 (E)
See
#97041 (I)
#5745
#9602
RC12YC
Instructions #9776 (E)
See
Call Tech
#5823
#9602
RC12YC
Instructions #9776 (E)
See
Call Tech
#5823
#9602
RC12YC
Instructions #9776 (E)
See
Call Tech
#5745
#9602
RC12YC
Instructions #9776 (E)
See
Call Tech
#5745
#9602
RC12YC
Instructions #9776 (E)
See
Call Tech
#5823
#9602

Instructions #9363 (E)

See
Call Tech
#5823
#9602

Instructions #9363 (E)

See
Call Tech
#5745
#9602

Instructions #9363 (E)

See
Call Tech
#5745
#9602

Instructions #9363 (E)

See
Call Tech
Call Tech Call Tech

Instructions #9363 (E)

See
#9361 (I)
#5823
#9602

Instructions #9363 (E)

See
#9361 (I)
#5745
#9602

Instructions #9363 (E)

See
#9361 (I)
Call Tech Call Tech

Instructions #9363 (E)

See
#9361 (I)
Call Tech Call Tech

Instructions #9363 (E)

MANIFOLDS GASKETS CYLINDER HEADS

Bare
Complete
With
(Single)
Valves
Bare Complete Polished
(Single) (Single) (Single) Finish

CARBURETORS

BIG-BLOCK CHEVY

ACCESSORIES
NITROUS

Victor Jr. 24 #77459

PLEASE REFER TO PAGE 212 FOR MORE INFORMATION REGARDING THE EMISSIONS GUIDE.

98

INDEX

l 50-STATE LEGAL l RACING ONLY l PRE-POLLUTION CONTROLLED VEHICLES l STOCK REPLACEMENT l ENGINE SWAP

SPORTSWEAR

EMISSIONS GUIDE

Edelbrock Victor 24 #77429

FUEL PUMPS

E-CNC 355 #79549

CARBURETORS
CYLINDER HEADS GASKETS MANIFOLDS
CAMSHAFT & VALVETRAIN
KITS POWER PACKAGES
SUPERCHARGERS
EFI
CRATE ENGINES
WATER PUMPS
ACCESSORIES
NITROUS
FUEL PUMPS
SPORTSWEAR
INDEX

CYLINDER HEADS

B/B, DURAMAX CHEVY

CHEVROLET 396-502 V8
Port Volume
Intake / Exhaust Description
377cc / 128cc DR23 CNC
425cc / 90cc DR17 CNC
405cc / 95cc Big Victor CNC
492cc / 187cc Big Victor CNC
480cc / 195cc Big Victor CNC

Max
Intake Exhaust
HP
Port
Port
Valve Chamber Valve Sizes Camshaft
Level
Style Location Angle Volume Intake / Exhaust
Type

800-1000
+.700"
23
119cc
2.40" / 1.88"

900-1100
+.600"
17
92cc 2.450" / 1.800"

1000-1200
+1.200"
18
92cc
2.45" / 1.85"

1000-1300
+1.200"
12
74cc
2.50" / 1.82"

1000-1300
+1.200"
14
84cc
2.50" / 1.82"

Valve
Max. Spring Emissions Install
Lift Diameter Code Notes
l

0.880"
1.635"
l

0.880"
1.73"
l

0.880"
1.73"
l

0.880"
1.73"

IMPORTANT NOTES
Deck thickness: 3/4", pushrod diameter: 7/16" .

CHEVROLET BIG-BLOCK V8
Port Volume
Intake/Exhaust Description
550cc / 225cc BV3 CNC
CNC
555cc / 275cc BV3
(Extended Exhaust Port)
**
BV3 CNC
580cc / 290cc BV3 CNC
**

BV3 CNC

Bolt
Pattern
Stock GM

Intake
Port
Chamber
Volume
Style
Symmetrical
76cc

Stock GM

Symmetrical

76cc

2.50" / 1.82"

11

4.84"

1.780"

Stock GM
CFE, Dart

Symmetrical
Symmetrical

**
80cc

2.50" / 1.82"
2.56" / 1.82"

14
11

4.84"
5.00"

1.780"
1.780"

l
l

CFE, Dart

Symmetrical

**

2.56" / 1.82"

14

5.00"

1.780"

Valve Sizes
Intake/Exhaust
2.50" / 1.82"

Valve
Plug
Bore
Spring Emissions Install
Code
Angle Spacing Diameter
Notes
l

11
4.84"
1.780"

CHEVROLET DURAMAX DIESEL V8

Port Volume
Intake / Exhaust
230cc / 117cc
230cc / 117cc
230cc / 117cc
230cc / 117cc

Description
2001-04 LB7, 6.6L
2004.5-05 LLY, 6.6L
2006-10 LLY/LBZ/LMM, 6.6L
2011-15 LML, 6.6L

HP
Level
400+
400+
400+
400+

Exhaust
Port
Chamber Valve Sizes
Location Volume Intake / Exhaust
Standard
0 cc
33mm/31mm
Standard
0 cc
33mm/31mm
Standard
0 cc
33mm/31mm
Standard
0 cc
33mm/31mm

Camshaft
Type
Hyd. Roller
Hyd. Roller
Hyd. Roller
Hyd. Roller

Valve
Max. Spring Emissions Install
Lift Diameter Code Notes

0.600"
27mm

0.600"
27mm

0.600"
27mm

0.600"
27mm

IMPORTANT NOTES
Recommend AC Delco glow plugs.

DURAMAX FEATURES

Designed for moderate to high performance street engines

A356 Alloy specially heat treated to T7 specifications
Fully Nitrided, Stellite faced intake and (Inconel) exhaust valves provide
high strength and hardness, along with excellent wear and corrosion
resistance perfectly suited for the diesel operating environment
Greatly improved intake flow for more power and exhaust flow
for lower EGTs

T7

WHAT IS T7
PROCESSING?

T7 specification heat treating results in castings which are called overaged. The
artificial aging step of aluminum heat treating is carried a step further than the
industry standard of T6. This reduces the residual stress in the casting and results
in a more dimensionally accurate finished product. T7 affects the tensile strength,
compressive strength, and hardness of the casting reducing the likelihood of cracks,
dropped seats, or lifting heads in extreme operating environments.

99

WHAT IS HIP
PROCESSING?
Edelbrock Duramax cylinder heads are available with a technique
called Hot Isostatic Pressing (HIP). This aerospace process heats
raw aluminum castings up to 900 F in a pressurized chamber (up
to 30,000 psi) and compresses the casting to remove any trapped
gases and internal porosity. During this process the casting is
compressed to eliminate these imperfections. The result is an
incredibly strong and dense sand casting that has three times the
fatigue life and nearly the consistency of billet aluminum. For the
engine builders and racers, HIP processed cylinder heads provide
less chance of failure due to fatigue. They also provide a better;
smoother machined surface finish when CNC port and chamber
work is applied.

WWW.EDELBROCK.COM

#614768
#613268
#613368

Intake
Gasket

Exhaust
Gasket

Valve
Cover
Gasket

Pushrods

Valves

Springs

Retainers

Spark
Plug

Call Tech - See Instructions

CNC Port
Matched
Intake
Manifolds

BV3
#614668

Big Victor
CNC 18 #617569

#285408
#285428
#285708
#285728
#285748

Head
Bolts

Head
Gasket

Intake
Gasket

Valve
Exhaust Cover
Gasket Gasket

Springs

Retainers

Call Tech

Glow
Plug
#62G
#63G
#9G
#9G

ACCESSORIES

Edelbrock Cylinder Heads

are Designed, Cast and
Assembled in the USA for
Unsurpassed Quality.

WATER PUMPS

T7

CRATE ENGINES

Call Tech

Pushrods

Valves
(I) Intake
(E) Exhaust
#4321 (I) / #4322 (E)
#4321 (I) / #4322 (E)
#4321 (I) / #4322 (E)
#4321 (I) / #4322 (E)

EFI

Complete
(Single)
#79029
#79059
#79089
#79119

SUPERCHARGERS

Bare
(Single)
#79009
#79039
#79069
#79099

Head
Gasket

POWER PACKAGES KITS

#613668

Head
Bolts

CAMSHAFT & VALVETRAIN

Bare
(Single)
#614668

Complete
(Single)
#614468
#615468

HEADS

MANIFOLDS GASKETS CYLINDER HEADS

Bare
(Single)

#615469
#617569
#618268
#618368

CARBURETORS

B/B, DURAMAX CHEVY CYLINDER

NITROUS
FUEL PUMPS

Duramax Cylinder
Head #79119

PLEASE REFER TO PAGE 212 FOR MORE INFORMATION REGARDING THE EMISSIONS GUIDE.

100

INDEX

l 50-STATE LEGAL l RACING ONLY l PRE-POLLUTION CONTROLLED VEHICLES l STOCK REPLACEMENT l ENGINE SWAP

SPORTSWEAR

EMISSIONS GUIDE

CARBURETORS
CYLINDER HEADS GASKETS MANIFOLDS
CAMSHAFT & VALVETRAIN
KITS POWER PACKAGES

Max Exhaust
Valve
HP
Port Chamber Valve Sizes Camshaft Max. Spring Emissions Install
Level Location Volume Intake / Exhaust
Type
Lift Diameter Code Notes
l

350-500 Standard
58cc
2.02" / 1.60" Hyd. Roller 0.580"
1.46"
l

350-500 Standard
58cc
2.02" / 1.60" Flat Tappet 0.580"
1.46"

Port Volume
Intake / Exhaust Description
176cc / 75cc Performer RPM Magnum
176cc / 75cc Performer RPM Magnum
RPM Magnum for
176cc / 75cc Performer
NHRA Stock/Super Stock only

Standard

58cc

Hyd. Roller 0.575"

1.46"

171cc / 77cc Performer RPM 340

350-450

Standard

65cc

2.02" / 1.60"

Hyd. Roller 0.575"

1.46"

171cc / 77cc Performer RPM

350-450

Standard

63cc

2.02" / 1.60"

Flat Tappet 0.575"

1.46"

171cc / 77cc Performer RPM 340

350-450

Standard

65cc

2.02" / 1.60"

Flat Tappet 0.575"

1.46"

Standard

63cc

Standard

65cc

+.250"
+.250"

58cc
58cc

1.55"
1.55"

l
l

RPM For NHRA

171cc / 77cc Performer
Stock/Super Stock only
RPM 340 For NHRA
171cc / 77cc Performer
Stock/Super Stock only
225cc / 62cc Victor 16
225cc / 62cc Victor 16

500-650
500-650

2.15" / 1.60" Hyd. Roller 0.650"

2.15" / 1.60" Solid Roller 0.670"

IMPORTANT NOTES
Deck thickness: 5/8", rocker stud diameter: 3/8", pushrod diameter: 5/16" (width of slot in guide plate), - Magnum only.
Replacement valve part numbers are for sets of 8, Call Tech for individual valve part number.

EFI

CHRYSLER 383-440 V8

Standard

210cc / 70cc E-Street 440

400-550

210cc / 70cc Performer RPM 440

WATER PUMPS

2.02" / 1.60"

400-550

ACCESSORIES

63cc

210cc / 70cc E-Street 440

NITROUS

Standard

Exhaust
Port Chamber
Location Volume

FUEL PUMPS

350-450

Max
HP
Level

SPORTSWEAR

171cc / 77cc Performer RPM

Port Volume
Intake / Exhaust Description

INDEX

CHRYSLER

CHRYSLER 318-360 V8

CRATE ENGINES

SUPERCHARGERS

CYLINDER HEADS

Valve
Spring Emissions Install
Diameter
Code
Notes

Valve Sizes
Intake / Exhaust

Camshaft
Type

Max.
Lift

75cc

2.14" / 1.81"

Flat Tappet

0.600"

1.55"

Standard

84cc

2.14" / 1.81"

Flat Tappet

0.600"

1.55"

450-575

Standard

75cc

2.14" / 1.81"

Hyd. Roller

0.600"

1.55"

210cc / 70cc Performer RPM 440

450-575

Standard

84cc

2.14" / 1.81"

Hyd. Roller

0.600"

1.55"

210cc / 70cc Performer RPM 440

450-575

Standard

88cc

2.14" / 1.81"

Hyd. Roller

0.600"

1.55"

210cc / 70cc Performer RPM 440

450-575

Standard

75cc

2.14" / 1.81"

Flat Tappet

0.600"

1.55"

210cc / 70cc Performer RPM 440

450-600

Standard

84cc

2.14" / 1.81"

Flat Tappet

0.600"

1.55"

210cc / 70cc Performer RPM 440

450-600

Standard

88cc

2.14" / 1.81"

Flat Tappet

0.600"

1.55"

Standard

82-84cc

RPM 440 NHRA

210cc / 70cc Performer
Stock/Super Stock only
280cc / 100cc Victor

500-800

+.250

72cc

2.20" / 1.81"

290cc / 100cc Victor Max Wedge

550-800

+.250

72cc

2.20" / 1.81"

IMPORTANT NOTES
For headers, contact TTI (951) 371-4878.
Offset intake rockers required (for Victor only), exhaust side accepts
standard-spec rockers.
Vacuum advance distributor may not clear cylinder head on Chrysler 440.
May require additional pushrod hole clearance for some combinations.

101

Bare heads will have valve guides & seats installed, but will require final sizing and a valve
job to match the valves you will be using.
These heads require the use of a 14mm x 3/4" reach, flat gasket spark plug with a heat
range appropriate to your application.
Deck thickness: 5/8", pushrod diameter: 3/8".
Replacement valve part numbers are for sets of 8, Call Tech for individual valve part number.

WWW.EDELBROCK.COM

Bare Complete
(Single) (Single)
#61769
#61775
#61769
#61779

Head
Bolts
#8577
#8577

Head
Gasket
#7327
#7327

Intake
Gasket
#7277
#7277

Exhaust
Gasket
#7237
#7237

Valve
Cover
Gasket
#7593
#7593

HEADS

Springs
#5845
#5767

See
Instructions
See
Instructions
See
Instructions
See
Instructions

#9366(I)
#9368 (E)
#9366 (I)
#9368 (E)
#9366 (I)
#9368 (E)
#9366 (I)
#9368 (E)

#5845

#9736

RC12YC

#5845

#9736

RC12YC

#5767

#9736

RC12YC

#5767

#9736

RC12YC

Spark
Retainers Plug
#9736
RC12YC
#9736
RC12YC

#61767

#8577

#7327

#7277

#7237

#7593

#60769

#60775

#8555

#7326

#7276

#7236

#7592

#60199

#60175

#8555

#7326

#7276

#7236

#7592

#60769

#60779

#8555

#7326

#7276

#7236

#7592

#60199

#60179

#8555

#7326

#7276

#7236

#7592

#60767

#8555

#7326

#7276

#7236

#7592

#60197

#8555

#7326

#7276

#7236

#7592

#61719
#61719

#61709
#61709

#61739
#61729

Call Tech
Call Tech

#5821
#5823

#9715
#9715

RC12YC
RC12YC

Performer RPM Chrysler #60779

Bare
w/Valves
Complete Bare
Only
Complete
(Pair) (Single) (Single) (Single)

Victor #61739

Head
Bolts

Head
Gasket

Intake
Gasket

Exhaust
Gasket

Valve
Cover
Gasket

#7325

#7225

#7226

#7591

#5093

#8591

#7325

#7225

#7226

#7591

#60839

#60825

#8591

#7325

#7225

#7226

#7591

#60919

#60925

#8591

#7325

#7225

#7226

#7591

#60149

#60185

#8591

#7325

#7225

#7226

#7591

#60839

#60829

#8591

#7325

#7225

#7226

#7591

#60919

#60929

#8591

#7325

#7225

#7226

#7591

#60149

#60189

#8591

#7325

#7225

#7226

#7591

#60917

#8591

#7325

#7225

#7226

#7591

#77919

#77929

#8592

#77939

#77949

#8592

Call Tech

#5792

#9644

RC12YC

Call Tech

#5792

#9644

RC12YC

#5821

#9644

RC12YC

#5821

#9644

RC12YC

#5821

#9644

RC12YC

#5792

#9644

RC12YC

#5792

#9644

RC12YC

#5792

#9644

RC12YC

#9641 (I)
#9643 (E)
#9641 (I)
#9643 (E)
#9641 (I)
#9643 (E)
#9641 (I)
#9643 (E)
#9641 (I)
#9643 (E)
#9641 (I)
#9643 (E)

#93775 (I)
#93777 (E)
#93775 (I)
#93777 (E)

IMPORTANT NOTES FOR E-STREET HEADS:

#5093 features straight plug

E-Street 440 Chrysler #5093

EMISSIONS GUIDE

PLEASE REFER TO PAGE 212 FOR MORE INFORMATION REGARDING THE EMISSIONS GUIDE.

102

INDEX

l 50-STATE LEGAL l RACING ONLY l PRE-POLLUTION CONTROLLED VEHICLES l STOCK REPLACEMENT l ENGINE SWAP

Victor Max Wedge #77939

SPORTSWEAR

IMPORTANT NOTES FOR VICTOR/VICTOR MAX WEDGE HEADS:

Valley cover for RB (413-440, 8.61" wide) #7798
Valley cover for B (383-400, 7.58" wide) #7799

FUEL PUMPS

#8591

NITROUS

ACCESSORIES

WATER PUMPS

CRATE ENGINES

#5090

EFI

Pushrods
See
Instructions
See
Instructions
See
Instructions
See
Instructions
See
Instructions
See
Instructions
See
Instructions
See
Instructions

Valves
(I) Intake
Spark
(E) Exhaust Springs Retainers Plug

SUPERCHARGERS

Performer RPM #61779

POWER PACKAGES KITS

CAMSHAFT & VALVETRAIN

Pushrods
#9638

Valves
(I) Intake
(E) Exhaust
Call Tech
Call Tech

MANIFOLDS GASKETS CYLINDER HEADS

Bare
With
Valves
(Single)

CARBURETORS

CHRYSLER CYLINDER

CARBURETORS
CYLINDER HEADS GASKETS MANIFOLDS
CAMSHAFT & VALVETRAIN

CHRYSLER AND S/B FORD

CHRYSLER 426-572 V8
Port Volume
Intake / Exhaust Description
245cc / 105cc Victor Jr. CNC
245cc / 105cc Victor Jr. CNC

Max
HP
Level
550-800
550-800

Exhaust
Port
Chamber Valve Sizes
Location Volume Intake / Exhaust
Standard
170cc 2.32" / 1.94
Standard
170cc 2.32" / 1.94

Camshaft
Type
Hyd. Roller
Flat Tappet

Valve
Max.
Spring Emissions
Lift Diameter
Code
l
0.700"
1.54"
l
0.700"
1.54"

Install
Notes

IMPORTANT NOTES
Minimum head gasket bore: 4.375".

FORD FLATHEAD V8
Description
1938-48 Ford/Mercury, 24 stud
1938-48 Ford/Mercury, 24 stud
High Lift/Large Chamber
1949-53 Ford/Mercury, 24 stud
1949-53 Ford/Mercury, 24 stud
High Lift/Large Chamber

Port Volume
Intake/Exhaust

Chamber
Volume
65cc

Valve Sizes
Intake/Exhaust

Max.
Lift

74cc

.550"

65cc

.500"

74cc

.550"

IMPORTANT NOTES
Flathead head copper gaskets for 1938-48 use Victor #3036; or Fel-Pro #7548;
or Edelbrock Head Gasket Set #7394; for 1949-53 use Fel-Pro #1055 and Fel-Pro
#1056 or Edelbrock Head Gasket Set #7393.

Valve Chamber Depth Emissions Install

Machined
Code
Notes
l

.500"

Head stud kit for 1938-48, use #8505; Head stud kit for 1949-53, use #8502.
Generator stud kit for 1938-48, use #8506.

Port Volume
Intake / Exhaust Description
170cc / 60cc E-Street
170cc / 60cc E-Street

Max
HP
Level
200-400
200-400

Exhaust
Port
Location
Standard
Standard

Chamber
Volume
60cc
60cc

Valve Sizes
Intake / Exhaust
1.90" / 1.60"
2.02" / 1.60"

Camshaft
Type
Flat Tappet
Flat Tappet

Valve
Max. Spring Emissions Install
Lift Diameter
Code
Notes
ll
0.550"
1.46"
A,C,D,E
ll
0.550"
1.46"
A,C,D,E

170cc / 60cc Performer

300-450

Standard

60cc

1.90" / 1.60"

Flat Tappet

0.575"

1.46"

A,C,D,E

170cc / 60cc Performer

300-450

Standard

60cc

2.02" / 1.60"

Flat Tappet

0.575"

1.46"

A,C,D,E

170cc / 60cc Performer RPM

300-450

Standard

60cc

1.90" / 1.60"

Hyd. Roller

0.575"

1.46"

ll

A,C,E

190cc / 60cc Performer RPM

325-500

Standard

60cc

2.02" / 1.60"

Hyd. Roller

0.575"

1.46"

ll

A,C,E

170cc / 60cc Performer RPM

325-500

Standard

60cc

1.90" / 1.60"

Flat Tappet

0.575"

1.46"

ll

A,C,D,E

190cc / 60cc Performer RPM

375-500

Standard

60cc

2.02" / 1.60"

Flat Tappet

0.575"

1.46"

ll

A,C,D,E

Standard

60cc

A,C

INDEX

SPORTSWEAR

FUEL PUMPS

NITROUS

ACCESSORIES

WATER PUMPS

CRATE ENGINES

SUPERCHARGERS

FORD 289-351W V8

EFI

KITS POWER PACKAGES

CYLINDER HEADS

RPM
170cc / 60cc Performer
NHRA Super Stock only
170cc / 60cc SCCA RPM

300-500

Standard

60cc

1.94" / 1.55"

170cc / 60cc Performer 5.0/5.8L

300-400

Standard

60cc

1.90" / 1.60"

Flat Tappet

0.575"

1.46"

C,F

170cc / 60cc Performer 5.0/5.8L

300-400

Standard

60cc

2.02" / 1.60"

Flat Tappet

0.575"

1.46"

C,F

Standard

60cc

C,F

5.0/5.8L
170cc / 60cc Performer
NHRA Super Stock only

FORD 289-351W CONTINUED NEXT PAGE...

IMPORTANT NOTES
289-302 V8's require head bolt bushings #9680 and
either head bolt kit #8552 (7/16") or stock bolts.
Will not accept rail rockers.
Replacement valve part numbers are for sets of 8,
Call Tech for individual valve part number.

103

IMPORTANT NOTES FOR E-STREET 170

Ideal for operating in the idle to 5500 rpm range.
For use with hydraulic flat tappet camshafts only
not compatible with hydraulic roller camshafts.
1.90" heads are ideal for stock pistons; 2.02" heads
require additional piston to valve clearance.

IMPORTANT NOTES FOR PERFORMER FORD

50-state street legal heads provide outstanding bolton performance for 1965-95 289, 302 & 351W.
1.90" intake valves are for use with stock pistons.
High-flow 2.02" intake valves are for use with pistons
notched for valve clearance.

WWW.EDELBROCK.COM

Block Letter
Logo (Pair)
Satin Polished
#1126
#11261

Script Logo
(Pair)
Satin Polished
#1125
#11251

Head
Studs
#8505

Head
Gasket
#7394

Intake
Gasket
#7234

Spark
Plug
RC12YC

#1128

#1127

#8505

#7394

#7234

RC12YC

#1115

#11151

#8502

#7393

#7234

RC12YC

#1116

#8502

#7393

#7234

RC12YC

Head
Bolts
#8513
#8513

Head
Gasket
#7347
#7347

Intake
Gasket
#7278
#7278

Exhaust
Gasket
#7279
#7279

Valve
Cover
Gasket
#7589
#7589

Valves
(I) Intake
Pushrods (E) Exhaust

Springs
#5821
#5792

See
Call Tech
Instructions

Retainers
#9644
#9644

Spark
Plug
RC12YC
RC12YC

CAMSHAFT & VALVETRAIN

Complete
(Single)
#61175
#61179

HEADS

Victor Jr.
Chrysler #61169

POWER PACKAGES KITS

1949-53 Flathead #1115

Head
Bolts
#8552
#8552

Head Intake
Gasket Gasket
#7313
#7220
#7313
#7220

Valve
Exhaust Cover
Gasket Gasket
#7227
#7560
#7227
#7560

#7313

#7220

#7227

#7560

#60349

#60359

#8552

#7313

#7220

#7227

#7560

#60219

#60225

#8552

#7313

#7220

#7227

#7560

#60249

#60255

#602515

#8552

#7313

#7220

#7227

#7560

#60219

#60229

#602219

#8552

#7313

#7220

#7227

#7560

#60249

#60259

#602519

#8552

#7313

#7220

#7227

#7560

#60217

#8552

#7313

#7220

#7227

#7560

#602479 #602579

#8552

#7313

#7220

#7227

#7560

#60369

#60379

#8552

#7313

#7220

#7227

#7560

#60389

#60399

#8552

#7313

#7220

#7227

#7560

#60367

#8552

#7313

#7220

#7227

#7560

EMISSIONS GUIDE

See
Page 115
See
Page 115
See
Page 115

#9779 (I)
#9773 (E)
#9768 (I)
#9767 (E)
#9777 (I)
#9767 (E)

RC12YC

#5825

#9741

RC12YC

#5845

#9736

RC12YC

#5845

#9736

RC12YC

#5825

#9741

RC12YC

#5825

#9741

RC12YC

RC12YC

RC12YC

#5825

#9741

RC12YC

#5825

#9741

RC12YC

RC12YC

IMPORTANT NOTES FOR PERFORMER 5.0/5.8L HEADS

Direct bolt-on heads for 1982-95 5.0L and 5.8L V8's.
1986 5.0L need pistons notched for clearance.
These heads accept 1982-95 5.0L V8 pedestal mount rocker arms and valvetrain.
5.0L's require head bolt bushings #9680 and either head bolt kit #8552 (7/16")
or stock bolts.

104

INDEX

l 50-STATE LEGAL l RACING ONLY l PRE-POLLUTION CONTROLLED VEHICLES l STOCK REPLACEMENT l ENGINE SWAP
PLEASE REFER TO PAGE 212 FOR MORE INFORMATION REGARDING THE EMISSIONS GUIDE.

#9741

SPORTSWEAR

IMPORTANT NOTES FOR PERFORMER RPM FORD

Designed for non-emissions 289, 302 and 351W Ford engines.
Max performance in the 1500-6500 rpm range for high performance street applications.
1.90" intake valves are for use with stock pistons and high-flow 2.02" intake valves
work with pistons notched for valve clearance.

#5825

FUEL PUMPS

#8552

NITROUS

ACCESSORIES

#60329

WATER PUMPS

#60319

CRATE ENGINES

Spark
Springs Retainers Plug
#5767
#9736 RC12YC
#5767
#9736 RC12YC

EFI

Pushrods

See
Page 115
See
Page 115
See
Page 115
See
Page 115
See
Page 115
See
Page 115

Valves
(I) Intake
(E) Exhaust
Call Tech
Call Tech
#9769 (I)
#9766 (E)
#9765 (I)
#9766 (E)
#9769 (I)
#9766 (E)
#9765 (I)
#9766 (E)
#9769 (I)
#9766 (E)
#9765 (I)
#9766 (E)

SUPERCHARGERS

Bare
(Pair)
#5020
#5024

Complete
(Single)
Complete Bare Complete Polished
(Pair) (Single) (Single)
Finish
#5023

#5025

MANIFOLDS GASKETS CYLINDER HEADS

Bare
With
Bare
Valves
(Single) (Single)
#61169 #61189
#61169 #61189

CARBURETORS

CHRYSLER AND S/B FORD CYLINDER

CARBURETORS
CYLINDER HEADS GASKETS MANIFOLDS
CAMSHAFT & VALVETRAIN

S/B FORD

FORD 289-351W (CONTINUED)

Port Volume
Intake / Exhaust
185cc / 75cc
205cc / 62cc
205cc / 62cc

Description
E-CNC 185
E-Series E-205
E-Series E-205

Max
HP
Level
350-500
400-525
400-525

Exhaust
Port
Chamber Valve Sizes
Location Volume Intake / Exhaust
Standard
59cc
2.02" / 1.57"
Standard
60cc
2.08" / 1.60"
Standard
60cc
2.08" / 1.60"

Camshaft
Type
Hyd. Roller
Hyd. Roller
Flat Tappet

Valve
Max. Spring Emissions Install
Lift Diameter
Code Notes
lll B,C,E
0.600"
1.30"
lll A,C,E
0.650"
1.55"
lll A,C,D,E
0.575"
1.46"

Hyd. Roller

0.650"

1.55"

B,C,E

Mech. Roller 0.670"

1.55"

B,C,E

210cc / 75cc Victor Jr. 20

350-550

+.125"

60cc

2.05" / 1.60"

210cc / 75cc Victor Jr. 20

400-600

+.125"

60cc

2.05" / 1.60"

Victor Jr. 20 Bare or with

210cc / 75cc valves
only (add your own springs) 350-600
Jr. 20 (Add your own
210cc / 75cc Victor
350-600
springs and valves)
240cc / 80cc Victor Semi-finished
400-1000

+.125"

60cc

2.05" / 1.60"

+.125"

70cc

+.550"

47cc

2.125" / 1.625"

IMPORTANT NOTES
289-302 V8's require head bolt bushings #9680 and either
head bolt kit #8552 (7/16") or stock bolts.
Will not accept rail rockers.
Replacement valve part numbers are for sets of 8,
Call Tech for individual valve part number.

INSTALLATION NOTES

(A) Deck thickness: 5/8", rocker stud diameter: 3/8", pushrod diameter: 5/16" (width of slot in guide plate)
(B) Deck thickness: 5/8", rocker stud diameter: 7/16", pushrod diameter: 5/16" (width of slot in guide plate)
(C) Bare heads will have valve guides and seats installed, but will require final sizing and a valve job to
match the valves you will be using
(D) Edelbrock pushrods #9632 are recommended
(E) Requires hardened pushrods
(F) Pedestal mount rockers

SUPERCHARGERS

KITS POWER PACKAGES

CYLINDER HEADS

Performer 5.0/5.8L #60379

Performer #60359

FORD 351 CLEVELAND V8

Port Volume
Intake / Exhaust Description
190cc / 90cc Performer RPM 351C
190cc / 90cc Performer RPM 351C
RPM 351C
190cc / 90cc Performer
For NHRA Stock/Super Stock
190cc / 90cc Performer RPM Clevor
190cc / 90cc Performer RPM Clevor

Max
HP
Level
350-500
350-500
400-500
400-500

Exhaust
Port
Chamber Valve Sizes Camshaft
Location Volume Intake / Exhaust
Type
Standard
60cc
2.05" / 1.60" Hyd. Roller
Standard
60cc
2.05" / 1.60" Flat Tappet

Valve
Max. Spring Emissions Install
Lift Diameter
Code
Notes
ll

0.580"
1.55"
ll

0.580"
1.55"

Standard

60cc

Standard
Standard

60cc
60cc

2.05" / 1.60"
2.05" / 1.60"

Hyd. Roller
Flat Tappet

0.580"
0.580"

1.55"
1.55"

ll
ll

IMPORTANT NOTES
Bare heads will have valve guides and seats installed, but will require
final sizing and a valve job to match the valves you will be using.
Deck thickness: 5/8", rocker stud diameter: 7/16", pushrod diameter:
5/16" (width of slot in guide plate).
Valve sizes are recommended, not maximum.
Performer RPM Clevor cylinder heads with 7/16" bolts on 289/302 engines,
use Edelbrock stepped head bolt washer kit #9680.
If building a Mock Boss 302, use head bolt kit #8560 (1/2" bolts).

IMPORTANT NOTES FOR PERFORMER RPM 351C

Designed for 351C, 351M & 400M Ford engines.
Compact charge kidney shape combustion chamber design.
Intake and exhaust ports based on 2V design.
Optimized spark plug location provides improved header clearance.
IMPORTANT NOTES FOR PERFORMER RPM CLEVOR
Direct bolt-on for Windsor blocks including the 289-302 and 351W, allowing the
creation of Mock Boss 302 or 351 Clevor Ford engines.
Features the desirable Boss 302 adjustable 7/16" stud and guideplate configuration.
Match with Edelbrock Performer RPM E-Boss manifolds for optimum performance.

INDEX

SPORTSWEAR

FUEL PUMPS

NITROUS

ACCESSORIES

WATER PUMPS

CRATE ENGINES

EFI

E-Street #5025

105

WWW.EDELBROCK.COM

HEADS

Valve
Cover
Gasket
#7560
#7560
#7560

Pushrods
See Page 115
See Page 115
See Page 115

Spark
Plug
RC12YC
RC12YC
RC12YC

#77169

#77189

#8552

#7219

#7560

See Instructions

RC12YC

#77169

#77199

#8552

#7219

#7560

See Instructions

#77169

#77179

#8552

#7219

#7560

See Instructions

#77389

#8552

#7219

#7560

See Instructions

#77219

#8552

Fel-Pro

See Instructions

RC12YC
RC12YC

POWER PACKAGES KITS

IMPORTANT NOTES FOR E-CNC 185

The E-CNC 185 cylinder heads for small-block Ford are an all new design that is CNC ported to achieve optimal
air-flow for maximum horsepower and torque in high performance street and light duty racing applications.
The casting and port designs are all new and engineered for great performance.
E-CNC heads feature fully 100% CNCd intake ports, combustion chambers and exhaust ports for improved air-flow.
These heads feature 2.02 intake and 1.57 exhaust, 8mm stem valves and are equipped with conical valve springs
and steel retainers for a lightweight and durable valve train combo.
These small-block Ford heads have an aggressive 18 valve angle for maximum performance and accept common
intake manifolds such as Edelbrock Performer RPM and RPM II.

SUPERCHARGERS

E-CNC 185 #79259

EFI

Performer RPM #60259

Victor Jr. #77189

Head
Gasket
#7328
#7328

Intake
Gasket
#7265
#7265

Exhaust
Gasket
#7262
#7262

Valve
Cover
Gasket
#7569
#7569

Pushrods
See Instructions
See Instructions

Valves
(I) Intake
(E) Exhaust
Call Tech
Call Tech

Springs
#5821
#5792

#61607

#8560

#7328

#7265

#7262

#7569

#61689
#61689

#61695
#61699

See Page 114

See Page 114

#7341
#7341

#7265
#7265

#7262
#7262

#7569
#7569

See Instructions
See Instructions

Call Tech
Call Tech

#5821
#5792

#9644
#9644

RC12YC
RC12YC

Spark
Retainers Plug
#9644 RC12YC
#9644 RC12YC

ACCESSORIES

Head
Bolts
#8560
#8560

WATER PUMPS

Complete
(Single)
#61625
#61629

CRATE ENGINES

Bare
(Single)
#61609
#61609

CAMSHAFT & VALVETRAIN

Valves
(I) Intake
(E) Exhaust Springs Retainers
Call Tech #5768
#9707
Call Tech #5821
#9715
Call Tech #5825
#9741
#9371 (I)
#5821
#9715
#9373 (E)
#9371 (I)
#5823
#9715
#9373 (E)
#9371 (I)

#9373 (E)

MANIFOLDS GASKETS CYLINDER HEADS

Bare Complete Bare Complete Head Head Intake Exhaust

(Pair) (Pair) (Single) (Single) Bolts Gasket Gasket Gasket

#79249
#79259
#8552 #7313
#7219
#7227
#5026
#5027

#8552 #7313
#7219
#7227
#5026
#5028

#8552 #7313
#7219
#7227

CARBURETORS

S/B FORD CYLINDER

NITROUS

Performer RPM Ford 351C #61629

PLEASE REFER TO PAGE 212 FOR MORE INFORMATION REGARDING THE EMISSIONS GUIDE.

106

INDEX

l 50-STATE LEGAL l RACING ONLY l PRE-POLLUTION CONTROLLED VEHICLES l STOCK REPLACEMENT l ENGINE SWAP

SPORTSWEAR

EMISSIONS GUIDE

Performer RPM Clevor #61699

FUEL PUMPS

Performer RPM
Ford 351C #61629

CARBURETORS
CYLINDER HEADS GASKETS MANIFOLDS
CAMSHAFT & VALVETRAIN
EFI
CRATE ENGINES
WATER PUMPS
ACCESSORIES
NITROUS
FUEL PUMPS
SPORTSWEAR
INDEX

B/B FORD

FORD FE V8
Port Volume
Intake / Exhaust Description
170cc / 125cc Performer RPM 390-428 Cobra Jet
RPM 427
170cc / 125cc Performer
low-riser/medium-riser
170cc / 125cc Performer RPM 390-428 Cobra Jet
RPM 427
170cc / 125cc Performer
low-riser/medium-riser
RPM 390 for NHRA
170cc / 125cc Performer
Stock & Super Stock only
Performer RPM 428
170cc / 125cc low-riser/medium-riser for
NHRA Stock and Super Stock only
Performer RPM 427
170cc / 125cc low-riser/medium-riser
for NHRA Super Stock only
RPM 390-428
170cc / 125cc Performer
for NHRA Super Stock only

Max Exhaust
HP
Port Chamber Valve Sizes Camshaft
Level Location Volume Intake / Exhaust
Type
400-550 Standard
72cc
2.09" / 1.66" Hyd. Roller

Valve
Max. Spring Emissions Install
Lift Diameter Code Notes
l

0.600"
1.55"

450-600

Standard

76cc

2.09" / 1.66"

Hyd. Roller

0.600"

1.55"

450-550

Standard

72cc

2.09" / 1.66"

Flat Tappet

0.600"

1.55"

450-550

Standard

76cc

2.09" / 1.66"

Flat Tappet

0.600"

1.55"

Standard

72cc

2.03" / 1.55"

1.55"

Standard

72cc

2.09" / 1.66"

1.55"

Standard

76cc

2.09" / 1.66"

1.55"

Standard

45cc

2.09" / 1.66"

1.55"

IMPORTANT NOTES
Edelbrock FE heads do not have the bolt pattern to accommodate the stock
GT 390 exhaust manifolds.
Bare heads will have valve guides and seats installed, but will require final
sizing and a valve job to match the valves you will be using.
Replacement valve part numbers are for sets of 8, Call Tech for individual
valve part number.
Deck thickness, 5/8".

SUPERCHARGERS

KITS POWER PACKAGES

CYLINDER HEADS

IMPORTANT NOTES FOR PERFORMER RPM FE

Direct bolt-on heads for 1961-76 390-427-428 Fords.
428 Cobra Jet-sized valves promote excellent flow for streetable power.
#60089 can be machined to accept 2.19" intake and 1.73" exhaust valves.
Rocker shaft stud kit #6009 provides better rocker shaft retention and
is highly recommended for use with Edelbrock FE heads. It eliminates
wearing of the threads and the possibility of bottoming the rocker shaft
bolts in the head.
Intake and exhaust CC values are projected if using Edelbrock valves,
and equivalent valve job and bowl blend.

Performer RPM FE #60069

FORD 429/460 V8
Port Volume
Intake / Exhaust
292cc / 100cc
292cc / 100cc
292cc / 100cc
292cc / 100cc
292cc / 100cc
292cc / 100cc
310cc / 100cc
310cc / 100cc
310cc / 100cc
310cc / 100cc

Description
Performer RPM 460
Performer RPM 460
Performer RPM 460
Performer RPM 460
Performer RPM 460 for NHRA
Super Stock only
Performer RPM 460 for NHRA
Super Stock only
Performer RPM 460 CJ
Performer RPM 460 CJ
Victor Jr. 460 CJ
Performer RPM 460 CJ for NHRA
Super Stock only

Max Exhaust
HP
Port
Chamber Valve Sizes
Level Location Volume Intake / Exhaust
500-600 Standard
95cc
2.19" / 1.76"
500-600 Standard
75cc
2.19" / 1.76"
500-600 Standard
95cc
2.19" / 1.76"
450-600 Standard
75cc
2.19" / 1.76"

550-650
550-750
600-750

IMPORTANT NOTES
Bare heads will have valve guides and seats installed, but will require
final sizing and a valve job to match the valves you will be using.
Deck thickness: 5/8", rocker stud diameter: 7/16", pushrod diameter:
3/8" (width of slot in guide plate).
Performer RPM 460 heads accept factory exhaust, aftermarket
headers and factory valvetrain components.
Requires the use of 3/8" diameter pushrods.
Replacement valve part numbers are for sets of 8, Call Tech for
individual valve part number.

107

Camshaft
Type
Hyd. Roller
Hyd. Roller
Flat Tappet
Flat Tappet

Valve
Max. Spring Emissions Install
Lift Diameter
Code
Notes
ll

0.700"
1.55"
ll

0.700"
1.55"
ll

0.700"
1.55"
ll

0.700"
1.55"

Standard

75cc

Standard

95cc

Standard
Standard
Standard

75cc
75cc
75cc

2.19" / 1.76"
2.19" / 1.76"
2.19" / 1.76"

1.55"
1.55"
1.58"

l
l
l

Standard

75cc

Hyd. Roller 0.700"

Flat Tappet 0.700"
Solid Roller 0.730"

IMPORTANT NOTES FOR PERFORMER RPM 460

Ideal for high-performance street and drag racing 1968-87 429/460 Fords.
Over 500+ hp at 6500 rpm (+30 hp more than ported factory heads) and 525+ ft-lbs.
of torque at 4500 rpm with the Performer RPM Total Power Package.
Intake ports can be opened up to match Victor manifolds #2965 and #2966.
IMPORTANT NOTES FOR PERFORMER RPM CJ & VICTOR JR. 460 CJ
Designed for 1968-87 429/460 Fords and the SVO 514 engine.
Machined profile Cobra Jet-style intake port entries.
Victor Jr. heads #61669 are complete with titanium retainers and high-quality valve
springs suitable for use with solid roller camshafts.

WWW.EDELBROCK.COM

CARBURETORS

B/B FORD CYLINDER

HEADS

Head
Bolts
#8557

Head
Gasket
#7337

Intake
Gasket
#7224

Exhaust
Gasket
#7229

Valve
Cover
Gasket
#7568

Pushrods
See Instructions

Valves
(I) Intake
(E) Exhaust
#9755 (I) #9757 (E)

#60089

#60075

#8557

#7337

#7224

#7229

#7568

See Instructions

#9755 (I) #9757 (E)

#5821

#9734

RC12YC

#60059

#60069

#8557

#7337

#7224

#7229

#7568

See Instructions

#9755 (I) #9757 (E)

#5792

#9734

RC12YC

#60089

#60079

#8557

#7337

#7224

#7229

#7568

See Instructions

#9755 (I) #9757 (E)

#5792

#9734

RC12YC

#60057

#8557

#7337

#7224

#7229

#7568

See Instructions

#60058

#8557

#7337

#7224

#7229

#7568

See Instructions

#60087

#8557

#7337

#7224

#7229

#7568

See Instructions

#61857

#8557

#7337

#7224

#7229

#7568

See Instructions

Spark
Springs Retainers Plug
#5821
#9734
RC12YC

POWER PACKAGES KITS

IMPORTANT NOTES FOR PERFORMER RPM FE NHRA LEGAL

Features no port profiling or bowl blending of ports.
#60087 is sized for 2.09"/1.66" valves for 427 low riser applications.
For 427 medium riser applications #60087 must be prepared for 2.19"/1.73" valves.

Performer RPM #60087 chamber

SUPERCHARGERS

Performer RPM #60087

Rocker shaft stud kit for all Edelbrock FE heads #6009

CAMSHAFT & VALVETRAIN

Complete
(Single)
#60065

MANIFOLDS GASKETS CYLINDER HEADS

Bare
(Single)
#60059

EFI

Head
Gasket
#7314
#7314
#7314
#7314

Intake
Gasket
#7223
#7223
#7223
#7223

Exhaust
Gasket
#7228
#7228
#7228
#7228

Valve
Cover
Gasket
#7563
#7563
#7563
#7563

Valves
(I) Intake
(E) Exhaust
Springs
#93662 (I) #93664 (E) #5823
#93771 (I) #93773 (E) #5823
#93662 (I) #93664 (E) #5745
#93771 (I) #93664 (E) #5745

Pushrods
See Instructions
See Instructions
See Instructions
See Instructions

#60697

#8566

#7314

#7223

#7228

#7563

See Instructions

#60687

#8566

#7314

#7223

#7228

#7563

See Instructions

#61659
#61659

#61645
#61649
#61669

#8566
#8566
#8566

#7314
#7314
#7314

#7228
#7228
#7228

#7563
#7563
#7563

See Instructions #93771 (I) #93773 (E)

See Instructions #93771 (I) #93773 (E)
See Instructions #93771 (I) #93773 (E)

#61657

#8566

#7314

#7228

#7563

See Instructions

Retainers
#9715
#9715
#9715
#9715

Spark
Plug
RC12YC
RC12YC
RC12YC
RC12YC

#5823
#9715
#5745
#9715
Call Tech

RC12YC
RC12YC
RC12YC

ACCESSORIES

Head
Bolts
#8566
#8566
#8566
#8566

WATER PUMPS

Complete
(Single)
#60665
#60675
#60669
#60679

CRATE ENGINES

Bare
(Single)
#60689
#60699
#60689
#60699

NITROUS
FUEL PUMPS

Performer RPM 460 CJ #61645

EMISSIONS GUIDE

PLEASE REFER TO PAGE 212 FOR MORE INFORMATION REGARDING THE EMISSIONS GUIDE.

108

INDEX

l 50-STATE LEGAL l RACING ONLY l PRE-POLLUTION CONTROLLED VEHICLES l STOCK REPLACEMENT l ENGINE SWAP

Victor Jr. #61669

SPORTSWEAR

Performer RPM 460 #60669

CARBURETORS
CYLINDER HEADS GASKETS MANIFOLDS
CAMSHAFT & VALVETRAIN
KITS POWER PACKAGES
SUPERCHARGERS
EFI
CRATE ENGINES
WATER PUMPS
ACCESSORIES
NITROUS
FUEL PUMPS
SPORTSWEAR
INDEX

CYLINDER HEADS

HOLDEN, OLDS & PONTIAC

HOLDEN VN 5.0L V8
Port Volume
Intake / Exhaust Description
195cc / 68cc Performer RPM
195cc / 68cc Performer RPM

Max Exhaust
HP
Port
Chamber
Level Location Volume
350-450 Standard
62cc
350-450 Standard
62cc

Valve Sizes
Intake / Exhaust
2.02" / 1.60"
2.02" / 1.60"

Camshaft
Type
Flat Tappet
Hyd. Roller

Valve
Max. Spring Emissions Install
Lift Diameter
Code
Notes
ll

.600"
1.45"
ll

.600"
1.45"

Intended as a direct replacement for factory heads and is configured as an easy

bolt-on part for 89-98 VN Commodore engines and as an upgrade to all earlier
Holden production engines.
Features an extra thick 11/16 deck.

IMPORTANT NOTES
Designed for use with 1989-98 Holden VN Commodore 5.0L engines.
Capable of 500+ horsepower on pump gas.

OLDSMOBILE V8
Port Volume
Intake / Exhaust
188cc / 106cc
188cc / 106cc
188cc / 106cc

Description
Performer RPM
Performer RPM
Performer RPM for
NHRA Super Stock only

Max
HP
Level
450-550
450-550

Exhaust
Port
Chamber
Location Volume
Standard
77cc
Standard
77cc
Standard

IMPORTANT NOTES
Head bolt holes drilled for stock 7/16" bolts, but can be easily modified for
1/2" bolts or studs by drilling the 1/2" counter bore.
Aftermarket 7/16"-stud rocker arms and 3/8" hardened pushrods required.
Can be used on 350-403, Call Tech.
Replacement valve part numbers are for sets of 8, Call Tech for
individual valve part number.

77cc

Valve Sizes
Intake / Exhaust
2.072" / 1.680"
2.072" / 1.680"

Camshaft
Type
Hyd. Roller
Flat Tappet

Valve
Max. Spring Emissions Install
Lift Diameter
Code
Notes
ll

0.575"
1.46"
ll

0.575"
1.46"

IMPORTANT NOTES
Designed for high-performance non-emission 1965-76 Olds 400, 425 and 455 c.i.d. V8's.
Heart shaped chamber for a more efficient burn, outstanding horsepower and torque.
Valvetrain has been upgraded from the factory pedestal-mount system to a 7/16"
screw-in stud and 3/8" pushrod-slot guideplate for increased valvetrain stability.
#60517 is not port matched or bowl blended and is NHRA-accepted for Super Stock
(except 1968-1969 W-30) only.
Deck thickness: 5/8", rocker stud diameter: 7/16", pushrod diameter: 3/8" (width of slot in guide plate).

PONTIAC V8
Port Volume
Intake / Exhaust
204cc / 145cc
204cc / 145cc
204cc / 145cc
204cc / 145cc
204cc / 145cc
215cc / 175cc
215cc / 175cc
215cc / 175cc
215cc / 175cc
215cc / 175cc
215cc / 175cc
215cc / 175cc
215cc / 175cc
215cc / 175cc
215cc / 175cc

Description
Performer D-Port
Performer D-Port
Performer D-Port
Performer D-Port
Performer D-Port
Performer
Performer
Performer RPM
Performer RPM
Performer RPM
(semi-finished)
RPM Pontiac for NHRA
Stock/Super Stock only
Performer RPM CNC
Performer RPM CNC
Performer RPM CNC
Performer RPM CNC

Max Exhaust
HP
Port
Level Location
400-500 Standard
400-500 Standard
400-500 Standard
400-500 Standard
400-500 Standard
400-500 Standard
400-500 Standard
450-550 Standard
450-550 Standard

450-600
450-650
450-600
450-600

Valve Sizes
Intake / Exhaust
2.11" / 1.66"
2.11" / 1.66"
2.11" / 1.66"
2.11" / 1.66"
2.11" / 1.66"
2.11" / 1.66"
2.11" / 1.66"
2.11" / 1.66"
2.11" / 1.66"

Hyd. Roller
Hyd. Roller
Flat Tappet
Flat Tappet
Hyd. Roller
Flat Tappet
Hyd. Roller
Flat Tappet

Standard

72cc

2.11" / 1.66"

Standard

72cc

Standard
Standard
Standard
Standard

87cc
72cc
87cc
72cc

2.11" / 1.66"
2.11" / 1.66"
2.11" / 1.66"
2.11" / 1.66"

Hyd. Roller
Hyd. Roller
Flat Tappet
Flat Tappet

0.575"
0.575"
0.575"
0.575"

1.46"
1.46"
1.46"
1.46"

l
l
l
l

IMPORTANT NOTES:
PERFORMER AND PERFORMER RPM
These heads require Ram Air IV (round port) style exhaust manifolds or headers and
Edelbrock head bolt kit #8549. Deck thickness: 5/8", rocker stud diameter: 7/16",
pushrod diameter: 5/16" (width of slot in guide plate).
PERFORMER RPM CNC
These heads require Ram Air IV (round port) style exhaust manifolds or headers and
Edelbrock head bolt kit #8549. Deck thickness: 5/8", rocker stud diameter: 7/16",
pushrod diameter: 5/16" (width of slot in guide plate).
PERFORMER PONTIAC D-PORT
350 c.i.d. engines may require notching the block for valve clearance. Three head bolt
bosses are raised higher than the standard D-port heights and will require head bolt kit
#8561 to install these heads. Deck thickness: 5/8", rocker stud diameter: 7/16", pushrod
diameter: 5/16" (width of slot in guide plate).

109

Camshaft
Type

Valve
Max.
Spring Emissions Install
Lift Diameter
Code
Notes
l

0.575"
1.46"
l

0.575"
1.46"
l

0.575"
1.46"
l

0.575"
1.46"
l

0.575"
1.46"
l

0.575"
1.46"
l

0.575"
1.46"
l

0.575"
1.46"
l

0.575"
1.46"

Chamber
Volume
65cc
87cc
72cc
87cc
72cc
87cc
87cc
72cc
72cc

GENERAL FOOTNOTES FOR PERFORMER AND PERFORMER RPM

Designed for outstanding performance gains in 1962-79 389-455 c.i.d. Pontiac engines.
Utilize the same port flange configuration as the 1969-1970 Ram-Air IV Pontiac
cylinder head.
Performer heads #60579/#60575 are 50-state emissions legal for 1965-79 vehicles.
Performer heads feature 87cc combustion chambers for use with low-octane and
a 9.5:1 compression ratio.
Our Performer RPM heads with the 72cc combustion chamber are for higher
compression engines.
Performer RPM #60509 is semi-machined and must be finished by a professional
head porter. They include valve guides and seats installed with no intake pushrod holes.
Performer RPM #60587 is not port matched or bowl blended and is NHRA accepted
for Stock and Super Stock.
Replacement valve part numbers are for sets of 8, Call Tech for individual valve
part number.

WWW.EDELBROCK.COM

Complete
(Single)
#61389
#61385

Head
Bolts

Exhaust
Gasket

Valve
Cover
Gasket

Head Head Intake Exhaust

Bolts Gasket Gasket Gasket
#8558 #7340 #7284
#7238
#8558 #7340 #7284
#7238

Valve
Cover
Gasket
#7598
#7598

#8558

#7598

#7340

#7284

#7238

Springs
#5845
#5767

See Instructions

#9376 (I) #9318 (E)

#7381

#7280

#7281

#60587

See page 114

#7381

#7280

#60609
#60539
#60609
#60539

#61525
#61515
#61529
#61519

See page 114

See page 114
See page 114
See page 114

#7381
#7381
#7381
#7381

#7280
#7280
#7280
#7280

Performer RPM Olds #60519

Pushrods
See Instructions
See Instructions
See Instructions
See Instructions
See Instructions
See Instructions
See Instructions
See Instructions
See Instructions

Valves
(I) Intake
(E) Exhaust

#9780 (I) #9782 (E)

#9780 (I) #9782 (E)
#9780 (I) #9782 (E)
#9780 (I) #9782 (E)
#9780 (I) #9782 (E)
#9780 (I) #9782 (E)
#9751 (I) #9753 (E)
#9751 (I) #9753(E)

Springs

#5845
#5845
#5767
#5767
#5845
#5767
#5845
#5767

Retainers

#9736
#9736
#9736
#9736
#9736
#9736
#9736
#9736

Spark
Plug
RC12YC
RC12YC
RC12YC
RC12YC
RC12YC
RC12YC
RC12YC
RC12YC
RC12YC

#7590

See Instructions

#7281

#7590

See Instructions

#7281
#7281
#7281
#7281

#7590
#7590
#7590
#7590

See Instructions
See Instructions
See Instructions
See Instructions

#9780 (I) #9782 (E)

#9751 (I) #9753 (E)
#9780 (I) #9782 (E)
#9751 (I) #9753 (E)

#5845
#5845
#5767
#5767

#9736
#9736
#9736
#9736

RC12YC
RC12YC
RC12YC
RC12YC

EMISSIONS GUIDE

PLEASE REFER TO PAGE 212 FOR MORE INFORMATION REGARDING THE EMISSIONS GUIDE.

110

INDEX

l 50-STATE LEGAL l RACING ONLY l PRE-POLLUTION CONTROLLED VEHICLES l STOCK REPLACEMENT l ENGINE SWAP

SPORTSWEAR

Performer Pontiac D-Port #61579

FUEL PUMPS

GENERAL FOOTNOTES FOR PERFORMER PONTIAC D-PORT

Performer Pontiac heads utilize a D-Port exhaust port configuration for use with standard
D-port exhaust systems.
They are designed for 1962-79 389, 400, 421, 428 and 455 c.i.d. V8 Pontiac engines with a
4.060" or larger bore.
They feature optimized oil return passages for increased oil flow.
The 65cc combustion chambers are as-cast while the 72cc and 87cc chambers are fully
CNCd to provide a 9.5:1 compression ratio when used with flat-top pistons.
The spark plug has been relocated closer to the exhaust valve for improved performance.
Cast with extra thick port walls and a compact port size, making them ideal for CNC and
hand porting.
Replacement valve part numbers are for sets of 8, Call Tech for individual valve part number.

NITROUS

GENERAL FOOTNOTES FOR PERFORMER RPM CNC

Performer RPM CNC feature a CNC machined combustion chamber for
a consistent and precise chamber for improved flow performance and
spark plug location.
Utilize the same port flange configuration as the 1969-1970 Ram-Air IV
Pontiac cylinder head.

ACCESSORIES

See page 114

WATER PUMPS

CRATE ENGINES

Valve
Cover
Gasket
#7590
#7590
#7590
#7590
#7590
#7590
#7590
#7590
#7590

Spark
Retainers Plug
#9606 RC12YC
#9606 RC12YC

EFI

Exhaust
Gasket
#7281
#7281
#7281
#7281
#7281
#7281
#7281
#7281
#7281

#60509

Pushrods
See Instructions
See Instructions

Valves
(I) Intake
(E) Exhaust
#9376 (I) #9318 (E)
#9376 (I) #9318 (E)

Spark
Retainers
Plug
#9707
RC12YC
#9707
RC12YC

SUPERCHARGERS

Intake
Gasket
#7280
#7280
#7280
#7280
#7280
#7280
#7280
#7280
#7280

Complete
(Single)

#61575
#61595
#61579
#61599
#60575
#60579
#60595
#60599

Call Tech

Performer RPM Olds #60519

Head
Head
Bolts
Gasket
See page 114 #7381
See page 114 #7381
See page 114 #7381
See page 114 #7381
See page 114 #7381
See page 114 #7381
See page 114 #7381
See page 114 #7381
See page 114 #7381

Bare
(Single)
#61539
#61569
#61589
#61569
#61589
#60569
#60569
#60589
#60589

See Instructions

Springs
#5768
#5768

POWER PACKAGES KITS

Performer RPM Olds #60519

Pushrods

Valves
(I) Intake
(E) Exhaust

CAMSHAFT & VALVETRAIN

Intake
Gasket
Call Tech

Complete
(Single)
Bare Complete Polished
(Single) (Single)
Finish
#60529
#60515

#60529
#60519
#605119
#60517

Head
Gasket

HEADS

MANIFOLDS GASKETS CYLINDER HEADS

Bare
(Single)
#61379
#61379

CARBURETORS

HOLDEN, OLDS & PONTIAC CYLINDER

CARBURETORS
CYLINDER HEADS GASKETS MANIFOLDS
CAMSHAFT & VALVETRAIN

WHAT IS HIP
PROCESSING?
Many Edelbrock Pro-Port cylinder heads are
available with a technique called Hot Isostatic
Pressing (HIP). This aerospace process
heats raw aluminum castings up to 900 F in
a pressurized chamber (up to 30,000 psi) and
compresses the casting to remove any trapped
gases and internal porosity. During this process
the casting in compressed to eliminate these
imperfections. The result is an incredibly strong
and dense sand casting that has three times the
fatigue life and nearly the consistency of billet
aluminum. For the engine builders and racers, HIP
processed cylinder heads provide less chance of
failure due to fatigue. They also provide a better;
smoother machined surface finish when CNC
port and chamber work is applied.

PRO-PORT RAW

PRO-PORT RAW AND SEMI-FINISHED HEADS

These unported versions of race-winning Edelbrock Victor Series CNC heads are designed specifically for
the professional cylinder head porter and engine builder. Like all other Edelbrock Cylinder heads, Pro-Port
cylinder heads are also cast in the USA at the state-of-the-art Edelbrock Foundry with extra-thick walls
to allow for custom CNC porting. In most cases, seats and manganese-bronze valve guides are included,
but not installed. Please note: These heads can not be used without professional head preparation.

Unported versions of Edelbrock race-winning

Victor Series CNC heads for the professional
cylinder head porter and engine builder
Pro-Port cylinder heads are cast
in the USA at the state-of-the-art
Edelbrock Foundry with extra-thick
walls to allow for custom CNC porting
The only heads designed specifically
to accommodate almost any
CNC port shape, size or location
Offers enough wall thickness for
CNC machining to various port dimensions
In most cases seats and manganese-bronze
valve guides are included, but not installed
USE THIS DRAWING TO DETERMINE VALVE PLACEMENT

EDELBROCK HAS A VAST NETWORK OF PROFESSIONAL CYLINDER HEAD PORTERS AND ENGINE
BUILDERS THAT RELY ON OUR PRO-PORT CASTINGS FOR THEIR PURPOSE-BUILT CUSTOM DESIGNS
BELOW ARE THE PROFESSIONAL CYLINDER HEAD PORTERS THAT PARTICIPATED IN EDELBROCKS
CYLINDER HEAD ROW AT THE 2014 PERFORMANCE RACING INDUSTRY SHOW IN INDIANAPOLIS, IN

CRATE ENGINES

EFI

SUPERCHARGERS

KITS POWER PACKAGES

CYLINDER HEADS

WATER PUMPS

www.totalengineairflow.com

INDEX

SPORTSWEAR

FUEL PUMPS

NITROUS

ACCESSORIES

Edelbrock Pro-Port
Raw cylinder heads
are designed, cast and
machined in the USA
for unsurpassed quality.
Victor 18 Pro-Port Raw #775369

Intake
Chamber
Description Size (A) HIP'd Angle Port Entry
SMALL-BLOCK CHEVY
42cc
Y
18
1.17" x 1.77"
Victor 18 l
36cc
Y
18
1.18" x 1.77"
Victor 18 l
32cc
N
15
1.17" x 1.80"
Victor 15 l
32cc
Y
15
1.17" x 1.80"
Victor 15 l

111

Victor 15 Pro-Port Raw #775469

Exhaust
Port Exit

Valve Sizes (B)

Intake / Exhaust

1.50" x 1.33"
1.50" x 1.34"
1.50" x 1.32"
1.50" x 1.32"

2.24" / 1.65"
2.24" / 1.65"
2.24" / 1.65"
2.24" / 1.65"

Valve Pierce Points (X,Y)(C)

Intake

Exhaust

Valve
Spacing

Valve
Seats

Valve
Guides

Part
No.

(-0.805", 0.000")
(-0.805", -0.026")
(-0.805", -0.026")
(-0.805", -0.026")

(1.130", 0.000")
(1.130", -0.026")
(1.130", -0.026")
(1.130", -0.026")

1.935"
1.935"
1.935"
1.935"

included
none
none
none

included
none
none
none

#775069
#775369
#77549
#775469

WWW.EDELBROCK.COM

HEADS

Big Victor #618269

Victor 24 Pro-Port Raw #614369

Port Entry
Intake / Exhaust
0.82" x 2.80" / 1.41" x 1.02"
0.82" x 2.80" / 1.41" x 1.02"
1.00" x 2.37" / 1.38" x 1.00"
1.00" x 2.37" / 1.38" x 1.00"
1.08" x 2.47" / 1.38" x 1.00"
1.08" x 2.47" / 1.38" x 1.00"
1.32" x 1.97" / 1.55" x 1.30"

Valve Sizes (B) Valve Pierce Points (X,Y)(C) Bore Valve Valve Valve
Intake / Exhaust
Intake
Exhaust
Spacing Spacing Seats Guides
2.08" / 1.64"
2.08" / 1.64"
2.165" / 1.60"
2.165" / 1.60"
2.200" / 1.60"
2.200" / 1.60"
2.25" / 1.68"

(0.820", 0.010") (-1.090", 0.010")

(0.820", 0.010") (-1.090", 0.010")
(0.854", 0.017") (1.156", 0.017")
(0.854", 0.017") (1.156", 0.017")
(0.764", 0.017") (1.205", 0.017")
(0.764", 0.017") (1.205", 0.017")
(0.652", 0.448") (-1.178", -0.238")

1.910"
1.910"
2.010"
2.010"
1.969"
1.969"

installed
included
included
included
included
included
none

included
included
included
included
included
included
included

Part
No.
#61989
#619869
#77339
#77349
#77369
#77379
#770469

2.20" / 1.60"

(0.625", 0.413") (-1.128", -0.330")

none

none

Victor SB2 l

20cc

10.5 x 3.4 1.50" x 1.05" / 1.55" x 1.32"

2.20" / 1.60"

(0.636", 0.450") (-1.144", -0.266")

none

none

#777668
#777669
#777869

118cc
38cc
38cc
118cc
38cc
38cc

70cc

N
N
Y
N
N
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y

2.25" / 1.90"
2.45" / 1.96"
2.45" / 1.96"
2.25" / 1.90"
2.45" / 1.96"
2.45" / 1.96"
2.42" / 1.94"
2.45" / 1.85"
2.45" / 1.85"
2.50" / 1.96"
2.52" / 1.90"
2.52" / 1.94"
2.60" / 1.94"
2.60" / 1.94"
2.60" / 1.94"

(-0.902", 0.058")
(-0.897", 0.058")
(-0.897", 0.058")
(-0.897", 0.058")
(-0.888", 0.020")
(-0.888", 0.058")
(-0.827", 0.227")
(-0.854", 0.455")
(-0.854", 0.455")
(-0.925", 0.215")
(0.690", -0.545")
(0.735", -0.530")
(0.707", -0.571")
(0.763", 0.521")
(0.763", 0.521")

4.84"
4.84"
5.00"
5.00"
4.84"

1.997"
1.997"
1.997"
1.997"
1.997"
1.997"

installed
installed
installed
included
installed
installed
installed

included

included
included
included
included
included
included
included
included
included
included
included
included
included
included
included

#77469
#61429
#614269
#77439
#61439
#614369
#614469
#618269
#618369
#777569
#614669
#614769
#613269
#613369
#613669

BIG-BLOCK CHEVY
Victor Jr. 24 l
Victor 24 l
Victor 24 l
Victor 24 l
Victor 24 (Gen III) l
Victor 24 (Gen III) l
Victor 11 l
Big Victor 12 l
Big Victor 14 l
Big Victor 18
Big Victor 3 l
Big Victor 3 l
Big Victor 3 l
Big Victor 3 l
Big Victor 3 l

24
24
24
24
24
24
23
12
14
18
11
14
11
14
11

300cc / 128cc
1.47" x 1.73" / 1.49" x 1.13"
1.47" x 1.73" / 1.49" x 1.13"
340cc / 128cc
1.47" x 1.73" / 1.49" x 1.13"
1.47" x 1.73" / 1.49" x 1.13"
1.80" x 2.56" / 2.10" x 1.80"
1.53" x 2.14" / 1.84" x 1.50"
1.53" x 2.14" / 1.84" x 1.50"
1.53" x 2.14" / 1.84" x 1.50"
2.52" x 2.15" / 1.84" x 1.50"
2.52" x 2.15" / 1.84" x 1.50"
2.52" x 2.15" / 1.84" x 1.50"
2.52" x 2.15" / 1.84" x 1.50"
2.52" x 2.15" / 1.84" x 1.50"

(1.06", -0.556")
(1.10", -0.556")
(1.10", -0.556")
(1.10", -0.556")
(1.095", -0.580")
(1.095", -0.580")
(1.150", -0.580")
(1.120", -0.420")
(1.120", -0.420")
(1.120", -0.420")
(-1.270", 0.350")
(-1.260", -0.350")
(-1.337", 0.346")
(-1.347", 0.352")
(-1.347", 0.352")

FOR EDELBROCK BIG VICTOR SPREAD-PORT CYLINDER HEADS

ACCESSORIES

Designed especially for the Edelbrock big-block Chevrolet Big Victor Spread-Port CNC 405 Cylinder Heads
#614468, #617569, #618268, #618269, #618368, #614469, #615468 and #615469. These heavy-duty sand cast
aluminum valve covers are designed to provide additional clearance to the Jesel rocker arm set-up when
used on our Big Victor Spread-Port cylinder heads. No provision for breather hole has been machined to
allow for custom plumbing of the crankcase ventilation system.
Sand Cast Aluminum Valve Covers for Big Victor Spread-Port CNC 405 Cylinder Heads.............#4259

WATER PUMPS

ALUMINUM VALVE COVER

CRATE ENGINES

10.5 x 3.4 1.50" x 1.05" / 1.55" x 1.32"

EFI

SUPERCHARGERS

20cc

POWER PACKAGES KITS

Victor ROX l

CAMSHAFT & VALVETRAIN

Chamber
Description
Size (A) HIP'd Angle
CHEVY LS SERIES
38cc
N
15
LS1 Gen III l
38cc
Y
15
LS1 Gen III l

N
15
Victor Jr LS3 l

N
15
Victor Jr. LS3-LSX l

N
12
Victor Jr. LS7 l

N
12
Victor Jr. LS7-LSX l
25cc
Y
5.6 x 2
LS-R l
CHEVY SB2 & ROX

MANIFOLDS GASKETS CYLINDER HEADS

LS-R Pro-Port Raw #770469

CARBURETORS

PRO-PORT RAW CYLINDER

NITROUS

Chamber
Size (A) HIP'd Angle

SMALL-BLOCK CHRYSLER

Victor 16 l

16

Port Entry
Intake / Exhaust

Valve Sizes (B)

Intake / Exhaust

1.00" x 2.11" / 1.52" x 1.40"

2.15" / 1.60"

EMISSIONS GUIDE

Victor 16 #61749 exhaust

Valve Pierce Points (X,Y)(C) Valve Valve

Intake
Exhaust
Spacing Seats

Valve
Guides

Part
No.

(-0.760", 0.000")

included

#61749

(1.168", -0.000")

1.928" included

PLEASE REFER TO PAGE 212 FOR MORE INFORMATION REGARDING THE EMISSIONS GUIDE.

112

INDEX

l 50-STATE LEGAL l RACING ONLY l PRE-POLLUTION CONTROLLED VEHICLES l STOCK REPLACEMENT l ENGINE SWAP

SPORTSWEAR

Description

Victor 16 #61749 deck

FUEL PUMPS

Small-block Chrysler Victor 16 #61749

CARBURETORS
CYLINDER HEADS GASKETS MANIFOLDS
CAMSHAFT & VALVETRAIN

Victor #770869

Chamber
Description
Size (A) HIP'd
SMALL-BLOCK FORD
36cc
Y
Victor l
Glidden
Victor II l
Glidden
Victor II l
Glidden Victor
SC-1 l

PRO-PORT RAW

Glidden Victor SC-1 #770769

Angle

Intake
Exhaust Valve Sizes (B)
Port Entry Port Exit Intake / Exhaust

Pro-Port Raw Ford FE #61859

Valve Pierce Points (X,Y)(C)

Intake

Exhaust

Valve Valve
Spacing Seats

15

1.00" x 1.85" 1.33" x 1.24"

2.18" / 1.64"

(-0.805", -0.006")

(1.130", -0.006")

1.935"
1.930"

24cc

11.3

1.34" x 1.77" 1.66" x 1.43"

2.24" / 1.64"

(-0.760", 0.000")

(1.170", 0.000")

24cc

11.3

1.34" x 1.77" 1.66" x 1.43"

2.24" / 1.64"

(-0.760", 0.000")

(1.170", 0.000")

20cc

(I) 7.3 x 0.3

(E) 6.88 x 0.55 1.16" x 1.76" 1.50" x 1.36"

2.24" / 1.64"

(-0.660", 0.440")

(1.110", -0.350")

Valve
Guides

Part
No.

included included #770869

#77319
(E)
#773169
1.930" included included
(E)
included included

included included #770769

FORD FE
Ford FE l

45cc
N
13
1.49" x .94" 1.55" x 1.00"
2.09" / 1.66"
(0.885", 0.220")
(1.160", 0.220") 2.045" included included #61859
45cc
N
13
1.49" x .94" 1.55" x 1.00"
2.09" / 1.66"
(0.885", 0.220")
(1.160", 0.220") 2.045" included included #61857
Ford FE NHRA l
#770769 Important Notes: These heads can not be used without professional head preparation. With a true canted valve design (7.3 intake and 6.8 exhaust valve angles),
these heads have maximum power potential. Extended intake flange and raised runners work with Yates-style manifolds.

ALUMINUM VALVE COVER

FOR FORD BOSS/CLEVELAND WITH SC-1 STYLE HEADS

Designed especially for the Edelbrock Glidden Victor SC-1 cylinder head #770769, these heavy-duty sand
cast aluminum valve covers will fit Edelbrock and factory Cleveland cylinder heads as well as other
aftermarket heads that utilize a Cleveland bolt pattern. They have been designed to provide additional
clearance to the Jesel rocker arm set-up when used on our Glidden Victor SC-1 Pro-Port Raw cylinder
head. No provision for breather hole has been machined to allow for custom plumbing of the crankcase
ventilation system.
Sand Cast Aluminum Valve Covers for Ford Boss/Cleveland with SC-1 Style Heads ....................#4267

INDEX

SPORTSWEAR

FUEL PUMPS

NITROUS

ACCESSORIES

WATER PUMPS

CRATE ENGINES

EFI

SUPERCHARGERS

KITS POWER PACKAGES

CYLINDER HEADS

Victor #60509

Chamber
Description
Size (A) HIP'd Angle
PONTIAC
72cc
N
14
Performer RPM l

N
12.6
Victor l

N
11
Victor l

Victor 12.6 #77839

Port Entry
Intake / Exhaust

Valve Sizes (B)

Intake / Exhaust

1.10" x 2.02" / 1.46" x 1.40"

0.83" x 1.61" / 1.00" x 1.273"
0.83" x 1.61" / 1.51" x 1.273"

2.11" / 1.66"
2.35" / 1.72"
2.35" / 1.72"

Victor 11 #77849

Valve Pierce Points (X,Y)(C)

Intake

Exhaust

Valve
Spacing

(-0.880", 0.000")
(0.810", 0.025")
(0.810", 0.055")

(1.150", 0.000")
(1.230", 0.025")
(1.230", 0.055")

2.030"
2.040"
2.040"

Valve Spring Footnotes

(A) Unfinished size
(B) Maximum size (each valve; may not be used together)
(C) Coordinates provided are for cylinders #1, #3, #6, #8. Invert the "X" value for cylinders #2, #4, #5, #7.
(D) All valves are uninstalled unless noted.
(E) Without pushrod hole clearance

113

Valve
Seats

Valve
Guides

included included
included included
included included

Part
No.
#60509
#77839
#77849

#77839 and #77849 Important Notes: These heads have deleted

pushrod holes.

WWW.EDELBROCK.COM

CARBURETORS

ACCESSORIES CYLINDER

HEADS

Edelbrock Head Bolt Kits contain a complete set of the highest quality head bolts and hardened
washers available. Cold-formed to ensure molecular integrity and heat treated prior to thread rolling
and machining. Reduced diameter bolt heads eliminate the need for valvetrain removal to facilitate
cylinder head re-torquing. Hardened and parallel-ground washers are included. Rated at 170,000 p.s.i.
AMC Head Bolt Kit for pre-1970 engines, 7/16" ........................................................................................#8531
AMC Head Bolt Kit for 1970 & later engines, 1/2" ....................................................................................#8532
Buick Head Bolt Kit for 400, 430 & 455 engines .......................................................................................#8503

S/B Chevy Head Bolt Kit #8550

Jeep 4.0L, Inline Six .....................................................................................................................................#8533

Oldsmobile Head Bolt Kit ...........................................................................................................................#8558
Chrysler 426-572 Gen II #8513 Bolt Kit

EFI
CRATE ENGINES

Pontiac Head Bolt Kit for #60509, #60579 and #60599 made before 3/15/02
(not for stock heads) .....................................................................................................................................#8556
Pontiac Head Bolt Kit for #60509, #60579, #60587 and #60599 made after 3/15/02
(not for stock heads) .....................................................................................................................................#8549
Pontiac D-Port Head Bolt Kit (not for stock heads) ................................................................................#8561

SUPERCHARGERS

Ford Flathead Head Stud Kit for 1938-48 Fords........................................................................................#8505

Ford Flathead Generator Stud Kit for 1938-48 Fords ...............................................................................#8506
Ford Flathead Head Stud Kit for 1949-53 Fords........................................................................................#8502
Ford 289-302 Head Bolt Kit (7/16" bolt diameter, use bushings #9680) .................................................#8552
Ford 351-Windsor Head Bolt Kit (1/2" bolt dia., used on 351W with 1/2" threads) ..............................#8553
Ford 302-Clevor Head Bolt Kit 7/16" bolt diameter, includes bushings #9680......................................#8562
Ford 351-Cleveland Head Bolt Kit .............................................................................................................#8560
Ford FE 390-428 Head Bolt Kit ....................................................................................................................#8557
Ford 429/460 Head Bolt Kit ..........................................................................................................................#8566

POWER PACKAGES KITS

Chevy 409 Head Bolt Kit #8581

S/B Chrysler Head Bolt Kit (not for stock heads) ....................................................................................#8555
Chrysler Magnum Head Bolt Kit for Edelbrock and 92 and up Magnum heads ................................#8577
B/B Chrysler 426-572 Gen II HEMI Head Bolt Kit ...................................................................................#8513
B/B Chrysler Head Bolt Kit .........................................................................................................................#8591
B/B Chrysler Victor Head Bolt Kit .............................................................................................................#8592

CAMSHAFT & VALVETRAIN

S/B Chevrolet Head Bolt Kit .......................................................................................................................#8550

Chevrolet Gen III LS1 Head Bolt Kit for Edelbrock & GM Gen III LS1 heads......................................#8596
Chevrolet Gen IV Head Bolt Kit for Edelbrock heads used on LS series engines 2004 and later ....#8595
B/B Chevrolet Head Bolt Kit (not for stock heads, Mark IV only) .........................................................#8551
B/B Chevrolet Head Bolt Kit for #77409, #77419, #77429, #77459, #77469, #77479,
#77489, #61409 (not for stock heads)...........................................................................................................#8554
Chevrolet 348/409 Head Bolt Kit ................................................................................................................#8581

MANIFOLDS GASKETS CYLINDER HEADS

HEAD BOLT KITS

WATER PUMPS

Ford 289-302 Head Bolt Kit #8552

Ford 302-Clevor Head Bolt Kit #8562

NITROUS

EDELBROCK ASSEMBLY LUBE

FUEL PUMPS

Don't forget the engine assembly lube when installing

your Edelbrock aluminum cylinder heads, camshaft
and timing chain. See page 126.

SPORTSWEAR

Pontiac Head Bolt Kit #8561

EMISSIONS GUIDE

PLEASE REFER TO PAGE 212 FOR MORE INFORMATION REGARDING THE EMISSIONS GUIDE.

114

INDEX

l 50-STATE LEGAL l RACING ONLY l PRE-POLLUTION CONTROLLED VEHICLES l STOCK REPLACEMENT l ENGINE SWAP

ACCESSORIES

S/B Chrysler Head Bolt Kit #8555

CARBURETORS
CYLINDER HEADS GASKETS MANIFOLDS
CAMSHAFT & VALVETRAIN

HEAD BOLT BUSHINGS WITH INTEGRAL WASHERS

Allows the use of stock or Edelbrock 7/16" head bolts on Edelbrock heads with 1/2" head bolt bosses.
Required for 289-302 V8's and 1967-69 AMC.
For Ford 5.0L (20 per package).....................................................................................................................#9680
For 1969 & Earlier AMC (28 per package).................................................................................................#9693
For 1966-69 AMC (4 deck dowels per package)........................................................................................#9652
S/B Ford Head Bolt Bushings #9680

Chevy 348/409 Pushrod Guideplates #9609

Chrysler Magnum Pushrod Guideplates #9662

EFI
CRATE ENGINES
WATER PUMPS

Steel Pushrods #9630

ACCESSORIES

Replacement Valve
Seats #9711

Edelbrock one-piece pushrods are manufactured from high quality 4130 Chromoly steel tubing that has been
surface hardened for maximum durability. They have precise formed swedged ends for a high quality fit with
the cup seats. A black oxide finish is added for corrosion resistance. All Edelbrock pushrods are 5/16" in
diameter, except for #9605, #9618, #9635, #9647, #9648 and #9654 which are 3/8" O.D. Sold in sets of 16.
AMC 343-401 (8.065")......................................................................................................................................#9637
Buick 400-430-455 (9.655")............................................................................................................................#9605
S/B Chevy (7.265", for use with Edelbrock hydraulic roller lifters #97423).............................................#9646
S/B Chevy (7.800" stock length)....................................................................................................................#9630
S/B Chevy (7.900", +.100")..............................................................................................................................#9629
S/B Chevy (7.191", for hydraulic roller lifters).............................................................................................#9653
Chevy 348/409 W (8.650" / 9.00")...............................................................................................................#9635
Chevy 348/409 W (8.300" / 8.750", for use with Edelbrock hydraulic roller lifters #97423)...............#9648
B/B Chevy (8.60" / 7.64", for hydraulic rollers).............................................................................................#9654
B/B Chevy (7.800 "/ 8.80", for use with Edelbrock hydraulic roller lifters #97433)..................................#9647
Chrysler Magnum 5.2L/5.9L (6.936")............................................................................................................#9638
Chrysler 426-572 Gen II HEMI (10.250" / 11.150", for hydraulic roller lifters)..........................................#9618
Ford 289-302 (6.805").......................................................................................................................................#9632
Ford 289-302 (6.385", for hydraulic rollers, 5.0L with stud mount)............................................................#9655 (A)
Ford 289-302 (6.430", for hydraulic rollers)..................................................................................................#9658 (A)
Ford 351W (7.714", for use with Edelbrock hydraulic roller lifters #97453).............................................#9659
Ford 351W (8.152")..........................................................................................................................................#9636
Ford 351W (7.634", for hydraulic rollers)......................................................................................................#9656
Ford 351M/400 (9.508")...................................................................................................................................#9633

These high-quality rocker studs are used in all Edelbrock cylinder heads requiring 3/8" screw-in studs.
Sold in packaged quantities of two or sixteen.
Rocker Stud (qty. 2).......................................................................................................................................#8598
Rocker Stud (qty. 16).....................................................................................................................................#8599

REPLACEMENT VALVE SEATS

Valve Seats
Part #
S/B Chevy, 2.02" (intake).................................... #9709
S/B Chevy, 1.60" (exhaust)................................ #9710
S/B Ford, 1.90" (intake) Set of 8........................ #9711
LT1/E-Tec, 1.94" (intake).................................... #9712
Pontiac, 2.11" (intake)........................................ #9713

FUEL PUMPS

NITROUS

Made from high-grade alloy steel and hardened to 60 Rockwell C. Stepped plates support pushrods
closer to the rockers stabilizing them. Sold in sets of 8.
AMC, 5/16" Flat...............................................................................................................................................#9669
S/B Chevy, 5/16" Flat.....................................................................................................................................#9660
B/B Chevy, 3/8" Stepped...............................................................................................................................#9666
Chevy 348/409 V8, 3/8" Flat...........................................................................................................................#9609
Chrysler Magnum, 5/16" Flat.......................................................................................................................#9662
S/B Ford, 5/16" Flat........................................................................................................................................#9665
351C Ford, 5/16" Flat......................................................................................................................................#9672
429/460 Ford, 3/8" Stepped...........................................................................................................................#93669
Oldsmobile, 3/8" Flat.....................................................................................................................................#9668
Pontiac, 5/16" Flat..........................................................................................................................................#9667

ROCKER STUDS

Rocker Studs #8599

SPORTSWEAR
INDEX

PUSHROD GUIDEPLATES FOR EDELBROCK HEADS

HARDENED STEEL PUSHROD SETS

SUPERCHARGERS

KITS POWER PACKAGES

CYLINDER HEADS ACCESSORIES

Valve Seats
Part #
Pontiac, 1.66" (exhaust)...............................#9714
B/B Chevy, 2.19" (intake).............................#9716
B/B Chevy, 1.88" (exhaust)..........................#9717
Ford FE, 2.09" (intake)...................................#9718
Ford FE, 1.66" (exhaust)................................#9719

(A) Refer to lifter kit #97453 on page 125.

115

WWW.EDELBROCK.COM

CARBURETORS

ACCESSORIES

CYLINDER HEADS

Roller Rocker Arms #77770

Manganese-bronze valve guide (one each) for Performer & Performer RPM heads, except as noted.
Valve Guides
Intake
Exhaust
S/B Chevy, S/B & B/B Chrysler, S/B Ford, Olds, Pontiac (Ram Air IV).............#9701 ........................#9701
B/B Chevy....................................................................................................................#9702 ........................#9703
Ford FE (for all Edelbrock FE heads) ........................................................................#9704 ........................#9704
S/B Ford (for Victor heads #77219) ..........................................................................#9702 ........................#9706
Valve Seals (2-ring positive oil control seals, sold in sets of 16)
11/32" (for all Edelbrock Performer & Performer RPM heads, except Ford FE) ...................................#9725
11/32" (S/B Chevy, S/B Ford Victor Jr. & B/B Chrysler Victor heads, .530") ..........................................#9758
3/8" (Ford FE, earlier design with .530" guide o.d.) ....................................................................................#9726
3/8" (Ford FE, current production with .562" guide o.d.) ...........................................................................#9759

REPLACEMENT VALVE SPRING LOCATORS

AND SEAT CUP KITS

Heat-treated machined (HTM) 7 valve stem locks for use with Edelbrock retainers.
Black oxide, top-quality steel for maximum strength.

SURE SEAT VALVE SPRINGS

Made of superior quality steel, machined and heat-treated for strength, these retainers have a black-oxide
finish for rust and corrosion protection. Chevrolet LS1 retainers are available in steel or lightweight Titanium.
Sold in sets of 16. See Application Guide on next page.

EMISSIONS GUIDE

PLEASE REFER TO PAGE 212 FOR MORE INFORMATION REGARDING THE EMISSIONS GUIDE.

116

INDEX

l 50-STATE LEGAL l RACING ONLY l PRE-POLLUTION CONTROLLED VEHICLES l STOCK REPLACEMENT l ENGINE SWAP

SPORTSWEAR

VALVE SPRING RETAINERS

FUEL PUMPS

THESE VALVETRAIN COMPONENTS ARE

A REQUIRED UPGRADE WHEN USING
AN EDELBROCK PERFORMER, RPM
OR TORKER CAM & STOCK HEADS.

NITROUS

Made of highest quality spring wire and precision wound to close tolerances, our Sure Seat Valve Spring
sets are for use on original equipment heads when installing Edelbrock Performer-Plus, Performer RPM
and Torker-Plus camshafts. These are the same high-performance springs used on Edelbrock Performer
and RPM cylinder heads. The #5900 Series valve springs are designed for use with OEM valve rotators.
Valve Spring Kits are complete kits that contain non-rotator valve springs, valve spring retainers and
matching valve stem locks. For camshaft warranty compliance, use only the springs recommended by
Edelbrock for each camshaft application. See Application Guide on next page.

ACCESSORIES

Application
Taper
Material
Part No.
#9611
Single groove (set of 32)
7
Heat treated stamped steel
#9612
Single groove (set of 32)
7
Heat treated stamped steel
#9614
Single groove (set of 24)
7
Heat treated stamped steel
#9615
Single groove, .050" low (set of 32)
7
4140 machined hardened steel
#9616
Single groove, std. height (set of 32)
7
4140 machined hardened steel
#9657
Single groove (set of 32)
7
Heat treated steel

WATER PUMPS

Diameter
11/32"
3/8"
11/32"
11/32"
11/32"
8MM

CRATE ENGINES

VALVE STEM LOCKS

EFI

Spring Seat
Locator/Seal Kit #5766

SUPERCHARGERS

Valve Spring
Locators #5770

Valve Spring Locators and Seat Cups provide a hardened barrier between the springs and the aluminum
heads, positively locating the base of the spring to prevent unwanted spring movement. Sold in sets of 16.
Spring Seat Cup Kit (.060" thick, requires 1.65" diameter counterbore) for Edelbrock
S/B Chevy, 289-351W Ford, 318-360 Chrysler and Pontiac heads using springs #5767/#5825/#5845.......#5769
Spring Seat Cup Kit (.060" thick, requires 1.73" diameter counterbore) for
Edelbrock 390-428 Ford FE and 383-440 Chrysler heads using valve springs #5792 ............................#5771
Valve Spring Locators (.805" i.d., 1.540" o.d.) for Edelbrock B/B Chevy
and 460 Ford heads using valve springs #5745..........................................................................................#5770
Spring Seat Locator/Seal Kit (8mm valves and conical springs) for use on Edelbrock LS
& E-CNC heads w/8mm stem valves combined with 1.30" conical (beehive style) springs................#5766

POWER PACKAGES KITS

Valve Seals #9758

REPLACEMENT GUIDES AND SEALS

CAMSHAFT & VALVETRAIN

Valve Guides
#9702 & #9703

Edelbrock red roller rockers are manufactured in the USA from lightweight 7129 grade aluminum. The body
is CNC machined then micro polished and anodized for durability. The trunnion race, roller pin and roller tip
are centerless ground for superior quality. A high quality Torrington needle bearing fulcrum combined with
a roller tip ensure smooth operation and performance. The full body design will accommodate up to 1.65"
diameter springs. Thick-walled adjusting nuts and 4140 steel poly locks are included.
Single
Set of 16
Small-Block Chevy, 3/8", 1.5:1 ratio .................................................................#77771 ............................#77770
Small-Block Chevy, 3/8", 1.5:1 ratio, wide body .............................................. N/A ...............................#77760
Small-Block Ford, 3/8", 1.6:1 ratio ....................................................................#77781 ............................#77780
Big-Block Chevy, 7/16", W 348/409, 1.7:1 ratio ...........................................#77791 ............................#77790

MANIFOLDS GASKETS CYLINDER HEADS

RED ROLLER ROCKER ARMS

CARBURETORS
CYLINDER HEADS GASKETS MANIFOLDS
CAMSHAFT & VALVETRAIN
KITS POWER PACKAGES
SUPERCHARGERS
EFI

CYLINDER HEADS
Valve
Springs
Application
Type
AMC 290-304-360-390-401 V8 70 & LATER
Cast-Iron O.E. Head
Cast-Iron O.E. Head
Edelbrock
#60119 / #60139

#5832
#5932*
#5792

Seat Installed
Pressure Height

Open
Pressure

VALVE SPRINGS & RETAINERS

Coil
O.D. I.D. Bind Retainers

Locks

Recommended
Edelbrock Cam

Non-Rotator
Rotator

89 lbs.
89 lbs.

1.812"
1.625"

200 lbs. @ .425" 1.364" 1.000" 1.300"

200 lbs. @ .425" 1.408" 1.010" 1.300"

#9720

See Lock Chart

#2132 Performer Cam

#2132 Performer Cam
#2132 Performer/
#7132 RPM Cams

Non-Rotator

132 lbs.

1.900"

312 lbs. @ .500" 1.550" 1.120" 1.160"

#9644

#9616

Non-Rotator

132 lbs.

1.900"

312 lbs. @ .500" 1.550" 1.120" 1.160"

#9644

#9616

N/A

Non-Rotator

80 lbs.

1.700"

200 lbs. @ .475" 1.222" 0.875" 1.150"

#9720

See Lock Chart

#2112 / #3790
Performer Cams

Non-Rotator

110 lbs.

1.700"

285 lbs. @ .490" 1.250" 0.750" 1.160"

#9729

See Lock Chart

#3714 Performer Cam

BUICK 400-430-455 V8
Edelbrock #60049

#5792

CHEVROLET 200-229-262 90 V6
Cast-Iron O.E. Head

#5813*

CHEVROLET 4.3L 90 V6 '87-95

Cast-Iron O.E. Head

#5814

CHEVROLET 262-400 V8 '57-95

#5802 (B)

Cast-Iron O.E. Head

Non-Rotator

80 lbs.

1.700"

200 lbs. @ .475" 1.222" 0.875" 1.150"

#9721

See Lock Chart

#5902 (B)

Cast-Iron O.E. Head

Rotator

80 lbs.

1.610"

200 lbs. @ .475" 1.222" 0.875" 1.150"

See Lock Chart

#5894 (E)

Cast-Iron O.E. Head

Non-Rotator

80 lbs.

1.700"

200 lbs. @ .475" 1.222" 0.875" 1.150"

#9721

See Lock Chart

#5703

Cast-Iron O.E. Head

Non-Rotator

110 lbs.

1.700"

285 lbs. @ .490" 1.265" 0.880" 1.160"

#9730

See Lock Chart

#5794 (E)

Cast-Iron O.E. Head

Non-Rotator

110 lbs.

1.700"

285 lbs. @ .490" 1.265" 0.880" 1.160"

#9730

See Lock Chart

#5767 (F)
#5825 (N)

E-Street Heads
Performer / RPM Heads
Performer, Performer RPM,
E-Tec Heads and
E-CNC Head #79895
E-CNC Head #61209
E-CNC Head #61219
Centerbolt & E-Tec
Edelbrock Heads
E-210 / Victor Jr. Heads
Victor Jr. Head
Edelbrock LT1 #61905
Edelbrock LT4 #61939

Non-Rotator
Non-Rotator

120 lbs.
128 lbs.

1.800"
1.800"

310 lbs. @ .580" 1.460" 1.060" 1.130"

338 lbs. @ .580" 1.460" 1.038" 1.150"

#9736
#9741

#9611
#9611

#2102 / #2103 / #3702

Performer Cams
#2102 / #2103 / #3702
Performer Cams
#2102, #2103, #3702
Performer Cams
#7102,
#5002 Cams
#7102,
#5002 Cams
All Performer Cams
All Flat Tappet Cams

Non-Rotator

150 lbs.

1.800"

420 lbs. @ .580" 1.460" 1.060" 1.150"

#9736

#9611

All Hydraulic Roller Cams

Non-Rotator
Non-Rotator

215 lbs.
240 lbs.

1.970"
2.020"

600 lbs. @ .725" 1.550" 0.812" 1.200"

785 lbs. @ .770" 1.550" 0.788" 1.200"

Non-Rotator

120 lbs.

1.800"

310 lbs. @ .580" 1.460" 1.060" 1.130"

#9736

#9611

Non-Rotator
Non-Rotator
Non-Rotator
Non-Rotator

145 lbs.
210 lbs.
120 lbs.
138 lbs.

1.900"
1.900"
1.800"
1.800"

345 lbs. @ .600" 1.540" 0.760" 1.130"

510 lbs. @ .600" 1.540" 0.731" 1.170"
310 lbs. @ .580" 1.460" 1.060" 1.130"
326 lbs. @ .600" (L) (M) 1.140"

#9715
#9715
#9736
#9707

#9615
#9615
#9616
#9657

#5845
#5740

#5767 (F)
#5821
#5823
#5767

Call for Info 800-416-8628

Call for Info 800-416-8628

N/A
N/A
All Performer, RPM
& Torker Cams
N/A
N/A
#2108
#2108

CRATE ENGINES

CHEVROLET LS1 V8

O.E. Head

Non-Rotator

138 lbs.

1.800"

326 lbs. @ .600"

(L)

(M) 1.140"

#9707

See Lock Chart

Edelbrock Heads

Non-Rotator

138 lbs.

1.800"

326 lbs. @ .600"

(L)

(M) 1.140"

#9707 or
#9708

#9657

Non-Rotator

130 lbs.

1.900"

355 lbs. @ .600" 1.550" 1.120" 1.160"

#9715

#9616
See Lock Chart
See Lock Chart

#2215 / #2216 / #2217,

#2218 / #2219 Cams
#2215 / #2216 / #2217,
#2218 / #2219 Cams

CHEVROLET 348/409 W-SERIES V8

Edelbrock #60819

#5862
#5895 (E)

Cast-Iron O.E. Head

Cast-Iron O.E. Head

Non-Rotator
Non-Rotator

90 lbs.
90 lbs.

1.880"
1.880"

220 lbs. @ .420" 1.500" 1.082" 1.340"

220 lbs. @ .420" 1.500" 1.082" 1.340"

#9720
#9720

#5762 (C)

Cast-Iron O.E. Head

Non-Rotator

100 lbs.

1.880"

300 lbs. @ .580" 1.440" 0.800" 1.340"

#9731

#5795 (C,E)

Cast-Iron O.E. Head

Non-Rotator

100 lbs.

1.880"

300 lbs. @ .580" 1.440" 0.800" 1.340"

#9731

#5745 (G)

E-Street Heads

Non-Rotator

135 lbs.

1.975"

320 lbs. @ .500" 1.500" 0.805" 1.150"

#9602

#5745 (G)

RPM/Victor Jr. Hydraulic

Non-Rotator

135 lbs.

1.975"

320 lbs. @ .500" 1.500" 0.805" 1.150"

#9602

CALL

Edelbrock Victor Heads

Non-Rotator

250 lbs.

2.000"

800 lbs. @ .850" 1.640" 0.860" 1.070"

Non-Rotator
Rotator
Non-Rotator
Non-Rotator
Non-Rotator

90 lbs.
90 lbs.
96 lbs.
120 lbs.
150 lbs.

1.650"
1.480"
1.650"
1.800"
1.800"

178 lbs. @ .375"

187 lbs. @ .400"
238 lbs. @ .430"
310 lbs. @ .580"
420 lbs. @ .580"

1.203"
1.002"
1.100"
1.130"
1.150"

#9720
#9736
#9736

See Lock Chart

See Lock Chart
See Lock Chart
#9611
#9611

#2177 Performer Cam

#2177 Performer Cam
#7177 RPM Cam
All Performer & RPM Cams
All Hydraulic Roller Cams

Non-Rotator
Non-Rotator

125 lbs.
115 lbs.

1.860"
1.900"

200 lbs. @ .430" 1.380" 1.010" 1.350"

280 lbs. @ .500" 1.550" 1.120" 1.160"

#9720
#9734

See Lock Chart

See Lock Chart

Non-Rotator

138 lbs.

1.880"

311 lbs. @ .500" 1.550" 1.120" 1.160"

#9644

#9616

#2192 Performer Cam

#7194 RPM Cam
#2192 Performer and
#7194 RPM Cams

INDEX

SPORTSWEAR

FUEL PUMPS

NITROUS

WATER PUMPS

N/A

ACCESSORIES

#5792

CHEVROLET 396-402-427-454 V8
#2162 Performer Cams
#2162 Performer Cams
All Performer, RPM
#9612
& Torker Cams
All
Performer, RPM
#9612
& Torker Cams
#9616
All Performer Cams
All Performer, RPM
#9616
& Torker Cams
Edelbrock Tech 800-416-8628

CHRYSLER 318-340-360 V8 1957-89

#5877
#5977*
#5777
#5767 (H)
#5845

Cast-Iron O.E. Head

Cast-Iron O.E. Head
Cast-Iron O.E. Head
Edelbrock Heads
Performer / RPM Heads

1.394"
1.380"
1.494"
1.460"
1.460"

1.010"
1.010"
1.080"
1.060"
1.060"

CHRYSLER 383-400-413-440 V8 '69-79

#5892
#5792
#5792

Cast-Iron O.E. Head

Cast-Iron O.E. Head
Edelbrock #5093
#60189 / #60929

*Available while supplies last

117

WWW.EDELBROCK.COM

#5822
#5922
#5882
#5896 (E)
#5722
#5796 (E)
#5767 (F)

289-302 Cast-Iron O.E.

289-302 Cast-Iron O.E.
351W Cast-Iron O.E.
289-302 Cast-Iron O.E.
289 / 302 / 351W
Cast-Iron O.E.
351W Cast-Iron O.E.
E-Street Heads

Type

Seat Installed
Pressure Height

Open
Pressure

HEADS

Coil
O.D. I.D. Bind Retainers
1.354"
1.360"
1.384"
1.354"

1.010"
0.976"
1.020"
1.010"

1.200"
1.115"
1.255"
1.200"

Locks

Recommended
Edelbrock Cam

#9724
#9724
#9724

See Lock Chart

See Lock Chart
See Lock Chart
See Lock Chart

All Performer Cams

All Performer Cams
All Performer Cams
All Performer Cams

Non-Rotator
Rotator
Non-Rotator
Non-Rotator

90 lbs.
85 lbs.
65 lbs.
90 lbs.

1.700"
1.700"
1.780"
1.700"

210 lbs. @ .400"

225 lbs. @ .400"
200 lbs. @ .440"
169 lbs. @ .310"

Non-Rotator

89 lbs.

1.770"

233 lbs. @ .390" 1.438" 1.024" 1.260"

#9733 (A)

See Lock Chart

All Flat Tappet Cams

Non-Rotator
Non-Rotator

89 lbs.
120 lbs.

1.770"
1.800"

233 lbs. @ .390" 1.438" 1.024" 1.260"

310 lbs. @ .580" 1.460" 1.060" 1.130"

#9733 (A)
#9736

See Lock Chart

#9611

1.800"

338 lbs. @ .580" 1.460" 1.060" 1.130"

#9741

#9611

150 lbs.
145 lbs.
145 lbs.
210 lbs.

1.800"
1.800"
1.900"
1.900"

420 lbs. @ .580" 1.460" 1.060" 1.150"

345 lbs. @ .600" (L) (M) 1.140"
380 lbs. @ .600" 1.540" 0.760" 1.130"
490 lbs. @ .600" 1.540" 0.731" 1.170"

#9736
#9707
#9715
#9715

#9611
#9657
#9616
#9616

Cast-Iron O.E. Head

Cast-Iron O.E. Head

Non-Rotator
Rotator

80 lbs.
80 lbs.

1.820"
1.680"

226 lbs. @ .430" 1.400" 1.000" 1.330"

226 lbs. @ .430" 1.400" 1.000" 1.330"

#9724
-

See Lock Chart

See Lock Chart

#2172 Performer Cam

#2172 Performer Cam

Edelbrock #61629, #61699

Non-Rotator

132 lbs.

1.900"

312 lbs. @ .500" 1.550" 1.120" 1.160"

#9644

#9616

All Flat Tappet

Cleveland

Non-Rotator

90 lbs.

1.820"

220 lbs. @ .440" 1.458" 1.062" 1.320"

#9720

See Lock Chart

Non-Rotator

140 lbs.

1.885"

355 lbs. @ .580" 1.460" 1.060" 1.130"

#9734

#9612

Cast-Iron O.E. Head

Non-Rotator

75 lbs.

1.820"

229 lbs. @ .490" 1.390" 0.990" 1.280"

#9724

See Lock Chart

Cast-Iron O.E. Head

Non-Rotator

110 lbs.

1.830"

290 lbs. @ .580" 1.460" 1.060" 1.130"

#9736

Edelbrock #60669, #60679,

#61649
Edelbrock #61669

Non-Rotator

135 lbs.

1.975"

320 lbs. @ .500" 1.500" 0.805" 1.160"

#9715

N/A

235 lbs.

1.950"

610 lbs. @ 700" 1.575" 0.830" 1.150"

80 lbs.

1.670"

187 lbs. @ .400" 1.425" 1.041" 1.110"

FORD 351M/400 V8 1971-1982

#5872
#5972

FORD 351C V8
#5792

FORD 390-428 FE V8 1961-1976

#5806
#5792

Cast-Iron O.E. Head

Edelbrock #60069,
#60079

#2106 Performer Cam

All Performer
& RPM Cams

FORD 429/460 V8 1969-1987

#5867
#5767
#5745
Call

#2167 Performer Cam

All Performer
See Lock Chart
& RPM Cams
All Performer
#9616
& RPM Cams
Edelbrock Tech 800-416-8628

OLDSMOBILE 330-403 V8 1967-1984 & 1965-1976 400-455

#5812

330-350-403
Cast-Iron O.E.
330-350-403 Cast-Iron

Non-Rotator

See Lock Chart

#3712 Performer Cam

#7112 RPM Cam
All Performer
& RPM Cams
All Hydraulic Roller Cams

Non-Rotator

135 lbs.

1.750"

285 lbs. @ .550" 1.430" 0.760" 1.120"

#9736

See Lock Chart

#5767

Performer RPM Head #60519 Non-Rotator

120 lbs.

1.800"

305 lbs. @ .580" 1.460" 1.060" 1.130"

#9606*

#9611

#5845

Performer RPM Head #60515 Non-Rotator

150 lbs.

1.800"

420 lbs. @ .580" 1.460" 1.060" 1.150"

#9736

#9611

#5712

PONTIAC 389-455 V8 1965-LATER

#5857

#5767
#5845

Non-Rotator

100 lbs.

1.590"

242 lbs. @ .470" 1.390" 0.768" 0.990"

#9724

See Lock Chart

Cast-Iron O.E. Head

Non-Rotator

112 lbs.

1.700"

285 lbs. @ .500" 1.485" 0.830" 0.950"

(D)

See Lock Chart

Non-Rotator

120 lbs.

1.800"

310 lbs. @ .580" 1.460" 1.060" 1.130"

#9736

#9611

All Performer
& RPM Cams

Non-Rotator

150 lbs.

1.800"

420 lbs. @ .580" 1.460" 1.060" 1.150"

#9736

#9611

All Hydraulic Roller Cams

EMISSIONS GUIDE

PLEASE REFER TO PAGE 212 FOR MORE INFORMATION REGARDING THE EMISSIONS GUIDE.

118

INDEX

l 50-STATE LEGAL l RACING ONLY l PRE-POLLUTION CONTROLLED VEHICLES l STOCK REPLACEMENT l ENGINE SWAP

SPORTSWEAR

*Available while supplies last

FUEL PUMPS

(F) Fits #60859, #60879, #60979, #60989, #5023, #5025, #5089, #5073
(G) Fits #50459, #79459, #79539, #79559, #60439, #60459, #60479, #60499, #60559, #77429, #77479 & #77489
(H) Fits #60179, #60779 & #61779
(I) Fits #5028, #60229, #60259, #60329, #60359, #60379 & #60399
(J) Fits #61409, #77409 & #77459
(K) Titanium
(L) O.D. of top 1.066", O.D. of bottom 1.300"
(M) I.D. of 0.650", I.D. of bottom 0.885"
(N) Fits #5085, #60759, #60909, #60719, #60739, #60999, #60899 & #79899

NITROUS

VALVE SPRING FOOTNOTES

"O.E." stands for Original Equipment
(A) Use #9724 to add .100" installed height if needed
(B) In 305-350 Chevys, some '77 & later vehicles have heads #14014416 (scalloped-out
appearance at bottom), use non rotator springs #5802 with stock rotators
(C) Inner spring will not clear stock valve seal; head must be machined for PC type seals
(D) Use #99953 from Crane Cams
(E) Complete spring, retainer & lock kit

ACCESSORIES

#60599, #60579, #61579

#61259, #61519, #61599
Heads
#60575, #60595, #61595
#61255, #61515, #61575
Heads

#2157 Performer Cam

All Performer
& RPM Cams

WATER PUMPS

#5757

Cast-Iron O.E. Head

CRATE ENGINES

#9724

EFI

128 lbs.

Non-Rotator
Non-Rotator
Non-Rotator
Non-Rotator

SUPERCHARGERS

Non-Rotator

Performer RPM Heads

Edelbrock #79259
E-205 / Victor Jr. Heads
Victor Jr. Head

POWER PACKAGES KITS

Edelbrock Heads

#5845

#5821
#5823

CAMSHAFT & VALVETRAIN

#5825 (I)

All Flat Tappet Cams

All Performer Cams
All Performer, RPM
& Torker Cams
All Hydraulic Roller Cams
Rollin Thunder Cams

MANIFOLDS GASKETS CYLINDER HEADS

Valve
Springs
Application
FORD 289-302 & 351W V8

CARBURETORS

VALVE SPRINGS & RETAINERS CYLINDER

CARBURETORS
CYLINDER HEADS GASKETS MANIFOLDS
CAMSHAFT & VALVETRAIN
KITS POWER PACKAGES
SUPERCHARGERS
EFI
CRATE ENGINES
WATER PUMPS
ACCESSORIES
NITROUS
FUEL PUMPS
SPORTSWEAR
INDEX

CYLINDER HEADS FLOW TECH & VALVE SPRING INFO.

Edelbrock Cylinder Heads
are Designed, Cast and
Assembled in the USA for
Unsurpassed Quality.
The flow box is a plastic model of one intake port,
one exhaust port and one combustion chamber.
This cross section is created using 3-dimensional
Siemens NX8 design software and
tested with Computational Fluid
Dynamic (CFO) software.
The model is then created
in-house using our
Fortus 400 3D printer.
Testing a flow box
allows our engineers to
make the changes needed
for optimum performance before
taking the next step to more costly and
time consuming aluminum prototypes.

TECHNICAL
SPECIFICATION:
EDELBROCK STAINLESS
STEEL VALVES

All Edelbrock Performer, Performer RPM,

E-Series, E-CNC and Victor Series cylinder heads
are supplied with the highest quality stainless
steel valves on the market.
These valves are a one piece forged design and
feature 2% more nickel content than average
stainless steel valves. The increased nickel
content results in a stainless steel valve that
is stronger at higher operating temperatures.
This allows them to perform better in the
elevated temperature applications found in high
performance engines, especially exhaust valves.
Additionally, it also provides improved corrosion
resistance for increased endurance in forced
induction and nitrous assisted applications.
The valve stem is treated with a porous chrome
finish to provide hardness and oil retention.
This process leaves microscopic holes which
fill with engine oil for improved lubrication of
the valve stem and guide, while reducing wear
on the inner guide surface.
The end result of the above features, is a stainless
steel valve that is ideal for high performance
extreme duty applications.
IMPORTANT PLEASE READ!

When using other camshafts with

Edelbrock heads, please consult the
camshaft manufacturer for recommended
valve spring rates and specifications.
Valve spring rates and camshafts must
be compatible to avoid severe engine
damage. All Edelbrock complete heads
are supplied with valve springs that are
compatible with Edelbrock camshafts
for optimal operations within the
specified rpm range. Camshafts that
exceed the specified valve spring rate
will void the warranty on these heads.

119

COMPARING FLOW DATA

When comparing airflow numbers between heads, there are several things to consider. These are general
guidelines not absolutes but guidelines that should be considered when purchasing cylinder heads.

1. YOU MAY NOT BE GETTING APPLES-TO-APPLES COMPARISON.

Flow bench measurements are only useful and accurate when done carefully and on a calibrated
bench. Proper alignment of the head with the bore is required to simulate exact geometry of the engine.
Accurate lift measurements are also required. Finally, atmospheric conditions are needed to interpret
the data. As a result, you may not be getting an apples-to-apples comparison when comparing
numbers from different benches.

2. BIGGER IS NOT ALWAYS BETTER!

A large port doesnt always mean more power. This is especially true with street heads and in some
cases, race heads. Velocity is just as important as flow. A smaller port volume generally equates to higher
velocity for better street performance. The speed of the mixture determines how tightly the combustion
chamber is packed. The more tightly packed the combustion chamber, the more pressure is developed
when the mixture is ignited, pushing the piston with more force for more power. For example: A large port
and a big flow number at 0.600" lift means low velocity (especially off-idle to 3500 rpm) and results in less
throttle response. For the street, velocity is the key to overall performance.

3. COMPARE PEAK FLOW AND LOW LIFT FLOW.

Cylinder head buyers have a tendency to only consider peak flow numbers. Its important to look at all the
flow numbers, from .100" to peak, in order to determine the performance level of a head.

4. TYPE OF VALVE INFLUENCES FLOW.

The type of valves used will influence how well a port flows. A valve with an undercut stem is less of a
restriction to flow and will allow a port to flow more, filling the cylinder better and producing more power.

5. CONSIDER THIS FACT FOR STREET APPLICATIONS.

Generally, in a street application, the smaller the valve diameter, the better the velocity and flow will be
with the correctly sized port. This holds true for both the intake and the exhaust ports. When you can
equal the flow of a larger port and larger valve with a smaller port and smaller valve, you have a much
more efficient port, which will generally make more power and use less fuel.

6. WHATS THE PRESSURE DIFFERENTIAL?

The pressure differential that a head is flowed at dramatically affects the results. All Edelbrock
heads are flowed at 28" of water, which more closely represents what an engine will see. Beware of
companies flowing heads at anything less than 28" of water, because that is not a valid comparison
with Edelbrock heads.
Installed Ht.

Rates

Coil
Bind

Maximum RPM

1.800"

1.800" = 120 lbs

1.219" = 320 lbs

1.130"

Performer cams: 5500 rpm

Performer RPM cams: 6500 rpm

1.800"

1.800" = 150 lbs

1.200" = 420 lbs

1.150"

Rollin Thunder cams: 6500 rpm

#61939, #79259

1.800"

1.140"

6500 rpm

#60229, #60259, #60329, #60359, #60379,

#60399, #60719, #60739, #60759, #60899,
#60909, #60999, #79899, #5028, #5085

1.800" = 138 lbs.

1.200" = 326 lbs.

1.800"

1.850" = 128 lbs.

1.270" = 338 lbs.

1.130"

Performer RPM cams: 6500 rpm

#60069, #60079, #60929, #61629

1.885"

1.160"

#60119, #60139, #60049

1.900"

1.160"

Performer cams: 5500 rpm

Performer RPM cams: 6500 rpm
Performer cams: 5500 rpm
Performer RPM cams: 6500 rpm

#5087, #5027

1.900"

1.130"

Rollin Thunder cams: 6500 rpm

#60065, #60075, #60815, #60925, #61625

1.885"

1.150"

Rollin Thunder cams: 6500 rpm

#60455, #60555, #77425, #77485, #79455,

#79535, #79555, #604515, #605515
#60459, #60479, #60499, #60559, #60669,
#60679

1.975"

1.150"

Rollin Thunder cams: 6500 rpm

1.160"

Performer cams: 5500 rpm

Performer RPM cams: 6500 rpm

#77189, #77589, #77619

1.900"

1.130"

8000 rpm

#77199, #77599, #77629

1.900"

1.170"

8000 rpm

#61669

1.950"

1.170"

7500 rpm

#61409, #77409, #77459

2.000"

1.885" = 115 lbs.

1.400" = 280 lbs.
1.900" = 132 lbs.
1.400" = 312 lbs.
1.900" = 145 lbs.
1.300" = 345 lbs.
1.885" = 140 lbs.
1.380" = 317 lbs.
1.975" = 175 lbs.
1.375" = 465 lbs.
1.975" = 125 lbs.
1.475" = 310 lbs.
1.900" = 145 lbs.
1.300" = 380 lbs.
1.900" = 210 lbs.
1.300" = 490 lbs.
1.950" = 235 lbs.
1.250" = 610 lbs.
2.000" = 250 lbs.
1.150" = 800 lbs.

1.070"

8000 rpm

Cylinder Heads
#60179, #60519, #60579, #60599, #60779,
#60859, #60879, #60979, #60989, #61779,
#5023, #5025, #5073, #5089
#60175, #60225, #60255, #60515, #60575,
#60595, #60715, #60735, #60775, #60895,
#60975, #60985, #60995, #61575, #61595,
#61775, #602515, #607115, #607315, #608915

1.975"

WWW.EDELBROCK.COM

HEADS

65 / 52

130 / 96

192 / 127

235 / 163

258 / 182

260 / 190

68 / 58

127 / 108

190 / 150

241 / 173

274 / 183

273 / 190

63 / 51
68 / 50
63 / 51
63 / 51
61 / 51
64 / 54
64 / 54
67 / 57
66 / 53
67 / 64
65 / 54
64 / 57
67 / 60
74 / 71
73 / 71
76 / 70
77 / 64
74 / 69
72 / 64
80 / 62

63 / 60

125 / 99
136 / 96
124 / 94
126 / 97
127 / 95
122 / 96
130 / 104
122 / 110
129 / 103
119 / 112
119 / 107
134 / 107
148 / 118
143 / 128
143 / 128
146 / 132
155 / 129
150 / 130
140 / 122
159 / 123
149 / 122
150 / 137

182 / 131
191 / 132
181 / 128
180 / 129
185 / 118
177 / 124
186 / 140
175 / 153
185 / 156
177 / 153
173 / 145
193 / 147
221 / 157
207 / 153
208 / 153
212 / 156
235 / 181
227 / 172
213 / 167
234 / 164
227 / 164
223 / 190

225 / 153
265 / 160
227 / 146
227 / 148
217 / 131
217 / 147
220 / 169
223 / 182
231 / 200
226 / 188
255 / 181
239 / 180
256 / 184
250 / 178
251 / 178
255 / 181
292 / 214
279 / 197
273 / 199
295 / 197
301 / 196
288 / 226

248 / 163
272 / 172
253 / 157
250 / 158
229 / 137
229 / 166
232 / 183
252 / 196
255 / 202
265 / 207
267 / 187
274 / 200
266 / 204
284 / 200
284 / 200
294 / 207
330 / 241
317 / 210
318 / 223
343 / 223
351 / 225
353 / 254

249 / 168
275 / 175
253 / 163
249 / 165
237 / 140
232 / 175
238 / 190
259 / 204
261 / 207
281 / 217
270 / 190
285 / 210
273 / 216
309 / 218
299 / 218
314 / 228
354 / 252
337 / 221
342 / 240
369 / 241
385 / 248
415 / 277

265 / 207
260 / 210
285 / 220

277 / 221

368 / 257
344 / 230
346 / 251
380 / 255
405 / 268
468 / 302

409 / 284
496 / 324

414 / 297
491 / 328

62 / 52
81 / 66
69 / 64
79 / 70
79 / 70
85 / 63

119 / 105
157 / 139
129 / 108
143 / 126
143 / 126
150 / 118

175 / 142
233 / 195
188 / 142
207 / 160
207 / 160
211 / 160

225 / 169
306 / 225
232 / 171
256 / 188
256 / 188
261 / 189

251 / 185
357 / 239
249 / 183
278 / 206
278 / 206
298 / 207

260 / 190
386 / 242
251 / 190
291 / 217
291 / 217
322 / 219

401 / 243

292 / 223
325 / 226

409 / 243

413 / 242

65 / 42
65 / 57
61 / 55
64 / 56
72 / 57
70 / 57
62 / 50
62 / 56
64 / 56
78 / 63
64 / 54
58 / 54
88 / 64
76 / 67

121 / 92
128 / 96
126 / 101
124 / 103
132 / 104
128 / 104
122 / 93
126 / 101
124 / 103
146 / 119
127 / 108
120 / 105
153 / 113
140 / 118

174 / 130
179 / 128
179 / 133
177 / 137
183 / 142
183 / 142
175 / 125
179 / 133
177 / 137
213 / 173
186 / 140
180 / 138
195 / 148
207 / 153

216 / 150
223 / 155
220 / 152
221 / 158
216 / 159
219 / 163
213 / 140
220 / 152
221 / 158
257 / 197
234 / 167
227 / 151
233 / 171
260 / 180

242 /162
253 / 168
238 / 163
247 / 167
245 / 170
251 / 170
228 / 146
238 / 163
247 / 167
281 / 205
268 / 189
260 / 161
265 / 183
300 / 200

249 /168
267 / 175
243 / 169
248 / 172
249 / 174
255 / 174
232 / 150
243 / 169
248 / 172
292 / 209
291 / 195
265 / 165
270 / 200
319 / 207

277 / 180

285 / 199

326 / 207

66 / 63

123 / 103

179 / 127

221 / 144

241 / 151

237 / 155

67 / 54

131 / 102

195 / 137

245 / 163

278 / 179

268 / 188

72 / 56
71 / 69
65 / 52
65 / 52

138 / 106
143 / 120
140 / 105
136 / 103

198 / 141
208 / 151
201 / 131
199 / 130

239 / 163
253 / 173
236 / 145
237 / 146

264 / 175
272 / 191
250 / 151
256 / 151

275 / 185
286 / 199
257 / 156
263 / 157

258 / 157
263 / 159

AMC
#60119, #60139

BUICK
#60049

CHEVROLET
#5073, #5089
#5085, #5087
#60719, #60739, #60759
#60899, #60909, #60999
#608979
#60859, #60879
#60979
#60989
#79899
#77589, #77599, #77619, #77629
#61939
#79949
#60819
#50459, #60459, #60479, #604519
#60499, #61459
#60559
#79539, #79559, #79535, #79555
#79459, #79455
#77489, #77485, #77479, #77475
#77409, #77429, #77425
#61409
#617569

CHRYSLER
#61779, #61775
#61175, #61179
#60779, #60775, #60179, #60175
#5090, #5093
#60929, #60925, #60189, #60185
#77929, #77949

FORD
#5023, #5025
#5027, #5028
#60329
#60359
#60229
#60259
#602579
#60379
#60399
#79259
#77179
#61629, #61625, #61699
#60069
#60669, #60679, #61649, #61669

JEEP

#50169

OLDSMOBILE
#60519, #60515

PONTIAC
#60579
#60599
#61569
#61599

EMISSIONS GUIDE

PLEASE REFER TO PAGE 212 FOR MORE INFORMATION REGARDING THE EMISSIONS GUIDE.

120

INDEX

l 50-STATE LEGAL l RACING ONLY l PRE-POLLUTION CONTROLLED VEHICLES l STOCK REPLACEMENT l ENGINE SWAP

SPORTSWEAR

IMPORTANT NOTES: Cylinder heads for hydraulic roller cam applications have the same flow characteristics as heads for hydraulic flat tappet cams
All flow numbers are done on our Superflow 1020 flow bench, recorded data @ 28" H2O.

FUEL PUMPS

.900"
Int / Exh

NITROUS

.800"
Int / Exh

ACCESSORIES

.700"
Int / Exh

WATER PUMPS

.600"
Int / Exh

CRATE ENGINES

.500"
Int / Exh

EFI

.400"
Int / Exh

SUPERCHARGERS

.300"
Int / Exh

POWER PACKAGES KITS

.200"
Int / Exh

CAMSHAFT & VALVETRAIN

.100"
Int / Exh

MANIFOLDS GASKETS CYLINDER HEADS

Applications

CARBURETORS

FLOW DATA @ 28" H20 CYLINDER

CARBURETORS
CYLINDER HEADS GASKETS MANIFOLDS

CAMSHAFTS

EDELBROCK CAMSHAFT KITS

PART OF THE TOTAL POWER PACKAGE

Edelbrock camshafts are matched to Edelbrock Total Power Package components for proven performance, taking
the guesswork out of camshaft selection. Roller Cams are compatible with OEM or Edelbrock hydraulic roller
tappets which reduce friction, virtually eliminate break-in problems, and permit higher valve velocities for increased
performance. Performer-Plus flat tappet camshafts provide improved performance and maintain great vacuum
for power accessories. Performer RPM hydraulic flat tappet camshafts are designed for high performance street
applications while still providing great low-end torque and increased horsepower up to 6,500 rpm. Finally, our line
of Rollin Thunder hydraulic roller camshafts are modern designs that provide improved horsepower and torque
over flat tappet cams, plus they also offer great idle and sufficient vacuum to support power accessories.

PERFORMER-PLUS CAMSHAFT KITS

Designed for optimum torque from the low-end to the mid-range, Performer-Plus camshafts match with Performer
manifolds for vehicles operating from off-idle to 5500 rpm. They are smooth idling cams for daily drivers, trucks,
vans, RVs and 4x4s. You can expect a major improvement in throttle response and torque. In the manifold section
youll find torque graphs showing the power gains from Performer manifolds and Performer-Plus cams.
All camshafts include flat tappet lifters (except for cams designed for use with stock roller lifters), assembly lube
and instructions. Select Performer-Plus camshafts for small-block Chevys are 50-state street legal.
Idle
Intake Vacuum Optional
Duration Lift
@ .050 @ Valve Lobe Center @ 1000 Valve
Int/Exh Int/Exh Seps. Line RPM Springs Cam Features

Part
No.

204/214 .420"/.442" 112 107

204/214 .448"/.472" 110 105

16"
15"

#3790
#2132

231-252 V6 Even Fire l 204/214 .448"/.472" 112 107

15"

Application
AMC
2.8L 60 V6 l
290-401 V8 l

For non computer-controlled vehicles with stock heads.

#5832/#5932 Produces 275 ft.-lbs. when matched with #2131 intake and stock heads.

BUICK

#3790
#2112

305 ft.-lbs. when matched with #2176 intake and stock heads.
#5877/#5977 Produces
Not for 1985 and later engines with roller lifters.
427 ft.-lbs. when matched with #2191 intake and stock heads.
#5892/#5992 Produces
For 1968 and later. Camshaft utilizes one bolt configuration.

#2177

310 HP & 260 ft.-lbs. when matched with #2121 intake

#5822/#5922 Produces
and #60329 heads. Not for 1985 and later engines with roller lifters.
#5822/#5922 Produces 325 ft.-lbs. when matched with #2181 intake & stock heads.
#5872/#5972 Produces 390 ft.-lbs. when matched with #2171 intake & stock heads.
410 ft.-lbs. when matched with #2105 intake & stock heads. Will not work in
#5806/#5906 Produces
427 side-oilers.
#5867
Produces 455 ft.-lbs. when matched with #2166 intake and stock heads.

#2122

204/214 .420"/.442" 112 107

14"

194/214 .398"/.442" 112 107

16"

400 V8 l

214/214 .442"/.442" 112 107

15"

283-400 V8
(1957-86) l

218/224 .464"/.470" 114

110

15"

396-427-454 V8 ll

218/228 .500"/.500" 114 109

15"

318-340-360 V8 l

204/204 .420"/.420" 110 106

16"

383-400-440 V8 l

204/214 .420"/.442" 112 107

14"

289-302 V8 l

204/214 .448"/.472" 112 107

16"

351W V8 l
351M-400 V8 l

204/214 .448"/.472" 112 107

204/214 .484"/.510" 112 107

15"
14"

352-428 V8 l

194/204 .460"/.480" 110 105

16"

429/460 V8 l

194/204 .460/.480" 110 105

15"

350-403 V8 l

204/214 .449"/.473" 114 106

16"

#5812

400-425-455 V8 l

214/224 .472"/.496" 112 107

15"

204/214 .420"/.442" 110 105

15"

#5857

FUEL PUMPS

NITROUS

CRATE ENGINES

EFI

16"
16"

WATER PUMPS

For non computer-controlled vehicles.

#5813/#5913 For non computer-controlled vehicles and non-roller applications.
#5802/#5902 50-state legal E.O. #D-215-19 for 1957-86 small-block Chevrolet. Produces 320 HP
and 382 ft.-lbs. when matched with #2701 intake and #60909 heads.
#5802/#5902 50-state legal E.O. #D-215-19 for 1976-95 small-block Chevrolet. Produces 245 ft.-lbs.
when matched with #3701 intake and stock heads. Non-roller applications.
#5802/#5902 50-state legal E.O. #D-215-19 for 1957-86 small-block Chevrolet. Produces 395 ft.-lbs.
when matched with #2101 intake and stock heads.
Produces 338 hp and 389 ft-lbs. of torque when matched with a Performer EPS
#5703
intake manifold #2701, E-Street cylinder heads #5089 and E-Street EFI system #3600.
Produces 470 ft.-lbs. when matched with #2161 intake and stock heads.
#5862
Not for 1965-66 big-block Chevrolets requiring a grooved rear cam journal.

204/214 .420"/.442" 112 107

204/214 .420"/.443" 112 107

SPORTSWEAR

#5487

For non computer-controlled vehicles.

CHEVROLET

ACCESSORIES

SUPERCHARGERS

KITS POWER PACKAGES

CAMSHAFT & VALVETRAIN

Important Notes: Our cam warranty will be honored only if the recommended Edelbrock Sure Seat Valve Springs are used.
If a warranty problem does arise, the end flap or label from the Edelbrock Sure Seat valve spring box along with store
receipt must be sent with the warranty claim. When changing your cam, its essential to change your timing chain.
We recommend Performer-Link True-Roller Timing Sets or Accu-Drive Cam Gear Drives (see pages 126-127).

2.8L 60 V6 l
200-229 90 V6 l
265-400 V8
(1957-86) l
305-350 V8
T.B.I. & LG-4 l

INDEX

PERFORMER-PLUS

#2102
#3702
#2103
#2117
#2162

CHRYSLER
#2192

FORD
#2182
#2172
#2106
#2167

OLDSMOBILE
Produces 330 ft.-lbs. when matched with #3711 intake and stock heads.
May require longer than stock pushrods. Will not fit 1966 & earlier.
Produces 445 ft.-lbs. when matched with #2151 intake and stock heads. Will not fit
Toronados or 1966 and earlier. Fits 1967-84 400-425-455, 39 bank angle engine.

#3712

Produces 387 HP & 439 ft.-lbs. when matched with #2156 intake & #60599 heads.

#2157

#2152

PONTIAC
350-455 V8 ll

121

WWW.EDELBROCK.COM

CARBURETORS

PERFORMER RPM, TORKER-PLUS &

HYDRAULIC FLAT TAPPET LIFTER KITS CAMSHAFTS
Designed for street high-performance applications, Performer RPM cams provide power from 1500 to 6500 rpm. These hydraulic lifter camshafts are dyno-matched to
Performer RPM manifolds for high-rpm horsepower while still maintaining acceptable low-end torque. With 10 to 12 inches of manifold vacuum at idle, Performer RPM
cams have more lift and duration than most street camshafts. In the manifold section youll find horsepower graphs showing the power levels obtainable when the
Performer RPM package is used with the right combination of Edelbrock components. Hydraulic flat tappet lifters are included with each Performer RPM camshaft.

Application
AMC
343-401 V8 l

Idle
Intake Vacuum Optional
Duration Lift
@ .050 @ Valve Lobe Center @ 1000 Valve
Int/Exh Int/Exh Seps. Line RPM Springs Cam Features

283-400 V8 (1957-1986) l 234/244 .488"/.510" 112 107

11"

#5703

396-427-454 V8 ll

240/246 .560"/.573" 112 110

10"

#5762

318-340-360 V8 l

234/244 .488"/.510" 112 107

10"

#5777

383-400-440 V8 l

238/246 .480"/.495" 110 105

10"

#5792

289-302 V8 l

224/234 .496"/.520" 112 107

11"

#5722

351W V8 l
351C V8 l
390-428 V8 l

224/234 .496"/.520" 110 106

234/244 .562"/.588" 112 107
236/236 .572"/.572" 108 103

11"
11"

#5722

#5767

429/460 V8 l

234/244 .556"/.581" 108 103

12"

224/234 .496"/.520" 112 107

231/240 .470"/.470" 113.5 112

433 HP & 489 ft.-lbs. with #7531 intake & #60119 heads. For non computer controlled vehicles. #7132
410 HP & 408 ft.-lbs. with #7501 intake & #60899 heads. Use only stock ratio rocker arms.
540 HP & 530 ft.-lbs. with #7163 intake & #60559 heads. Not for 1965-66 big-block
Chevys requiring a grooved rear cam journal.

#7102

417 HP & 397 ft.-lbs. with #7176 intake & #60779 heads. Not for 1985-later engines
with roller lifters. Adjustable pushrods or rocker arms required.
469 HP & 515 ft.-lbs. with #7193 intake & #60929 heads. Adjustable pushrods or
rocker arms required. For 1968-later. Camshaft utilizes one bolt configuration.

#7177

#7122

#5767

367 HP & 340 ft.-lbs. with #7121 intake & #60259 heads. Not for 1985-later engines
with roller lifters. Screw-in studs, guide plates and adjustable rocker arms required.
400 HP & 412 ft.-lbs. with #7181 intake & #60259 heads. Use only stock ratio rocker arms.
465 HP & 445 ft.-lbs. with #7564 intake & #61629 heads. Adjustable rocker arms required.
418 HP & 434 ft.-lbs. with #7105 intake & #60069 heads. Will not work in 427 side-oilers.
506 HP & 536 ft.-lbs. with #7166 intake & #60669 heads. Adjustable pushrods or
rocker arms required.

12"

#5712

397 HP & 400 ft.-lbs. with #7111 intake & stock iron heads. Adjustable pushrods or
rocker arms required.

#7112

10"

#5757

422 HP & 441 ft.-lbs. with #7156 intake & #60599 heads. Adjustable pushrods or
rocker arms required.

#7157

#7162

CHRYSLER
#7194

FORD
#7182
#7168
#7106
#7167

OLDSMOBILE
350-403 V8 l

PONTIAC
350-455 V8 ll

EFI

Designed to work with Torker II manifolds for performance from 2500 to 6500 rpm, these camshafts are ideal for high-performance street, drag or marine applications.
Torker-Plus cams have a slightly rough idle and are not suitable for trucks or towing applications. Hydraulic flat tappet lifters are included with each camshaft.
Part
No.

232/234
224/232

.488"/.488"
.527"/.553"

108
114

106
109

#5703
#5762

Use only stock ratio rocker arms.

Not for 1965-66 big-block Chevys requiring a grooved rear cam journal.

#5002
#5062

214/224

.472"/.496"

112

107

#5722

Adjustable pushrods or rocker arms and screw-in studs required.

Not for 1985-later engines with roller lifters.

#5022

224/234

.465"/.488"

114

109

#5757

Adjustable pushrods or rocker arms required.

#5057

FORD
289-302 V8 ll

PONTIAC
350-455 V8 ll

PLEASE REFER TO PAGE 212 FOR MORE INFORMATION REGARDING THE EMISSIONS GUIDE.

122

INDEX

l 50-STATE LEGAL l RACING ONLY l PRE-POLLUTION CONTROLLED VEHICLES l STOCK REPLACEMENT l ENGINE SWAP

SPORTSWEAR

EMISSIONS GUIDE

Performer RPM and Torker-Plus cams are

for street high-performance and racing
applications only not for heavy vehicles.
Use with Edelbrock Performer RPM heads (or
other aftermarket heads), adjustable valvetrain
components, screw-in studs, high-performance
adjustable rocker arms and at least 9.5:1
compression ratio. Headers, high-energy
ignitions, lower-than-stock rear gearing and a
high-performance torque converter (in auto.
transmission equipped vehicles) are necessary.

FUEL PUMPS

Edelbrocks Performer-Plus lifter sets are designed for use with Edelbrock Performer-Plus or equivalent
camshafts. Performer RPM lifter sets are designed for use with Edelbrock Performer RPM or equivalent
camshafts. Sold in complete sets. Note: Lifters are included with Edelbrock Performer-Plus and
Performer RPM camshafts.
Performer-Plus Hydraulic Flat Tappet Lifter Kit for 4.3L Chevy (6 cylinder, set of 16) .............................#9738
Performer-Plus Hydraulic Flat Tappet Lifter Kit for B/B Chevy (265-350, 400 & B/B 396-454 V8) ............#9738
Performer RPM Hydraulic Flat Tappet Lifter Kit for B/B Ford FE (352-428 8 cylinder, set of 16) .............#9705

IMPORTANT APPLICATION
INFORMATION

NITROUS

HYDRAULIC FLAT TAPPET LIFTER KITS

ACCESSORIES

Lift
Intake Optional
@ Valve Lobe Center Valve
Int/Exh Seps. Line Springs Cam Features

WATER PUMPS

283-400 V8 (1957-1986) l
396-427-454 V8 ll

Duration
@ .050
Int/Exh

CRATE ENGINES

TORKER-PLUS CAMSHAFTS

Application
CHEVROLET

SUPERCHARGERS

POWER PACKAGES KITS

11"

CHEVROLET

CAMSHAFT & VALVETRAIN

234/244 .520"/.544" 112 107

Part
No.

MANIFOLDS GASKETS CYLINDER HEADS

PERFORMER RPM CAMSHAFTS

CARBURETORS
KITS POWER PACKAGES
SUPERCHARGERS
EFI
CRATE ENGINES
WATER PUMPS
ACCESSORIES
NITROUS
FUEL PUMPS
SPORTSWEAR
INDEX

ROLLIN THUNDER

ROLLIN THUNDER
HYDRAULIC ROLLER CAMSHAFTS

GET 37 HORSEPOWER
7 FT-LBS. OF TORQUE
WITH A ROLLIN THUNDER
#2208 CAM SWAP OVER OUR
#2102 FLAT TAPPET CAM

Edelbrock Rollin Thunder camshafts are designed to improve horsepower and torque, produce a
great sounding performance idle and provide sufficient vacuum at idle to support power accessories.
Rollin Thunder camshafts feature more aggressive lift profiles than possible with conventional flat-tappet
hydraulic cams, without excessive valve overlap that can compromise low rpm drivability;
reduced friction provided by roller tappets makes this
combination of accelerated valve lift
and reduced duration possible.
Edelbrock Rollin Thunder
camshafts are performance
matched to Edelbrock Total
Power Package components
for proven performance.

CAMSHAFT & VALVETRAIN

CYLINDER HEADS GASKETS MANIFOLDS

CAMSHAFTS

EDELBROCK ROLLIN THUNDER CAMSHAFT FEATURES

Performance Roller camshafts produce higher lift velocity
and faster valve action produces increased horsepower and torque gains
Drivability Produces great sounding idle while providing
sufficient vacuum at idle to support power accessories
Durability The smaller surface contact area of a roller tappet
and reduced friction combined with stronger camshaft material
(hardened steel or iron) ensures longer camshaft life
Environmental Can use ILSAC GF-4 oil, which lowers your engines
emissions and does not require zinc or phosphate oil additives
Economy Reduced contact friction between the lifter and camshaft
increases an engines fuel economy for better mileage potential

Testing on a 350 c.i.d. small-block Chevy with

Edelbrock Power Package components, including
E-Tec 170 cylinder heads #60975, Performer EPS
Vortec intake manifold, #2716 and Performer 750cfm
carburetor #1407 and Rollin Thunder camshaft #2208
with roller lifters #97423 produced 363 HP @ 5,500
rpm and 402 ft.-lbs. of torque @ 4,000 rpm; thats an
increase of 36.5 HP and 6.6 ft-lbs. of torque over a
Performer-Plus hydraulic flat-tappet cam kit #2102
with only a camshaft and lifter change!

Application
CHEVROLET

Duration Lift
Intake
Optional
@ .050 @ Valve Lobe Center
Valve
Int/Exh Int/Exh Seps. Line Vacuum Springs Cam Features

Part
No.

For use with OEM hydraulic roller lifters (use original lifters).
Not for 1992-later 4.3L balance shaft engines. (A)

#3714

This camshaft works great when matched w/ Performer EPS intake manifold #2716,
Performer carb #1407, and Performer E-Tec cylinder heads #60975; this combo produces
363 HP / 402 ft.-lbs. of torque. Matching Edelbrock roller tappet lifter set #97423. (C)

#2208

16"

This camshaft works great when matched with Pro-Flo XT EFI system #3528, and
Performer RPM E-Tec cylinder heads #60975; this combo produces 408 HP / 450 ft.-lbs.
of torque. (Test on a 383 c.i.d.) Uses stock hydraulic roller lifters and pushrods.

#2209

283-400 V8 (1957-1986) l 234/238 .539"/.548" 112 107

12"

This camshaft works great when matched with Performer RPM Air-Gap intake manifold
#7516, Thunder Series AVS carb #1813, and Performer RPM E-Tec cylinder heads #60975; #2201
this combo produces 435 HP / 435 ft.-lbs. of torque. (C,D,E)

283-400 V8 (1987-Later)
Non-LT1 / Non-Gen III l 234/238 .539"/.548" 112 107

12"

This camshaft works great when matched with Performer RPM Air-Gap intake manifold
#7516, Thunder Series AVS carb #1813, and Performer RPM E-Tec cylinder heads #60975; #2204
this combo produces 435 HP / 435 ft.-lbs. of torque. (D,E)

283-400 V8 (1987-Later) l 234/238 .539"/.548" 114 110

13"

This wide lobe center camshaft works great when matched with Pro-Flo XT EFI
system #3528, and Performer E-Tec cylinder heads #60975; this combo produces
440 HP / 425 ft.-lbs. of torque. (D,E)

#2205

283-400 V8 (1957-86)
Performance rating based 242/240 594/594 112
on 383 c.i.d. S/B Chevy l

107

11"

This camshaft works great when matched with Performer RPM Air-Gap intake
manifold #7516, Thunder Series AVScarb #1813, and Performer RPM E-Tec
cylinder heads #60985; this combo produces 460 HP / 460 ft.-lbs. of torque. (C,D,E)

#2231

283-400 V8 (1987 & Later)

Performance rating based 242/240 .594"/.594" 112 107
on 383 c.i.d. S/B Chevy l

11"

This camshaft works great when matched with Performer RPM Air-Gap intake
manifold #7516, Thunder Series AVScarb #1813, and Performer RPM E-Tec
cylinder heads #60985; this combo produces 460 HP / 460 ft.-lbs. of torque. (D,E)

#2207

Small-Block (1957-86) l

13"

This wide lobe center camshaft works great when matched with Pro-Flo XT EFI system
#3528 and Performer RPM E-Tec cylinder heads #60975; this combo produces
440 HP / 425 ft.-lbs. of torque. (C,D,E)

#2210

4.3L 90 V6 l

210/214 .479"/.488" 112 107

17"

#5814

265-350 V8 (1957-86) l

212/222 .462"/.479" 112 107

16"

265-350 V8 (1987-Later) l 212/222 .462"/.479" 112 107

234/238 .539"/.548" 114 110

CONTINUED ON THE NEXT PAGE

123

WWW.EDELBROCK.COM

CARBURETORS

ROLLIN THUNDER CAMSHAFTS

Part
No.
#2215

LS1/LS6 (1997-04 Gen III) l

230/237 .540"/.540" 110 106

10"

This camshaft works great when matched with Performer RPM manifold #71187,
Thunder Series AVS carb #1813 and E-CNC 215 cylinder heads #79949; this combo
produces 460 HP / 424 ft.-lbs. of torque. (D)

#2216

LS1/LS6 (1997-04 Gen III) l

207/220 .573"/.580" 118 119.5

16"

This camshaft works great when matched with E-CNC 215 cylinder heads #79949; this
combo produces 494 HP / 439 ft.-lbs. of torque. (D,F)

#2218

LS1/LS6 (1997-04 Gen III) ll

230/243 .631"/.631" 114 113

14"

This camshaft works great when matched with E-CNC 215 cylinder heads #79949; this
combo produces 536 HP / 457 ft.-lbs. of torque. (D,F)

#2219

LT1 (1992-97) l

218/218 .525"/.525" 112 112

15"

This camshaft works great when matched w/ RPM Air-Gap intake manifold #7109 and
RPM LT4 cylinder heads #61939; this combo produces 430 HP / 420 ft.-lbs. of torque. Can also #2108
be used with standard or automatic transmission. (D) Reflash of your ECU is required.

348/409 W-series (1961-65) l 230/234 .616"/.628" 112 107

10"

This camshaft works great when matched with Performer RPM intake manifold #7159,
Performer carb #1412, and Performer RPM cylinder heads #60815; this combo produces #2268
451 HP / 470 ft.-lbs. of torque. Matching Edelbrock roller tappet lifter set #97423. (D)

396-502 V8 ll
(1967-95 Mark IV &Gen V)

236/245 .625"/.639" 112 109

10

This camshaft works great when matched with Victor Jr. intake manifold #2902 and
Victor Jr. 24 cylinder heads #77485; this combo produces 611 HP / 573 ft.-lbs. of
torque (Tested on a GM ZZ-502 shortblock). Not for 1965-66 B/B Chevys requiring a
grooved rear cam journal. (D,E)

#2261

454-502 V8 l
(1996-Later Gen VI)

236/245 .625"/.639" 112 109

10

This camshaft works great when matched with Victor Jr. intake manifold #2902 and
Victor Jr. 24 cylinder heads #77485; this combo produces 611 HP / 573 ft.-lbs. of
torque (Tested on a GM ZZ-502 shortblock). Not for 1965-66 B/B Chevys requiring a
grooved rear cam journal. (D,E)

#2262

500+ ll
(1967-95 Mark IV &Gen V)

248/256 .632"/.648" 112 109.5

11"

This camshaft works great when matched with Victor Jr. intake manifold #2902 and
E-CNC cylinder heads #79555; this combo produces 676 HP / 649 ft.-lbs. of torque. Not #2263
for 1965-66 B/B Chevys requiring a grooved rear cam journal. (D)

500+ (1996-Later Gen VI) l

248/256 .632"/.648" 112

10"

This camshaft works great when matched with Pro-Flo XT EFI system #3558 and
E-CNC cylinder heads #79555; this combo produces 723 HP / 652 ft.-lbs. of torque. (D)

#2264

This camshaft works great when matched with Pro-Flo XT EFI system #3544 and
Performer RPM cylinder heads #60925; this combo produces 517 HP / 523 ft.-lbs. of
torque. Matching Edelbrock roller tappet lifter set #97483. Must use included bronze
distributor gear, failure to use included gear could result in engine failure. Camshaft
utilizes three bolt configuration. (D)

#2206

This camshaft works great when matched with our Dual-Quad intake manifold #7524
and Victor Jr. cylinder heads #61175; this combo produces 705 HP / 623 ft.-lbs. of torque
on a 528 c.i.d. engine. Camshaft utilizes three bolt configuration. (D)

#2212

CHRYSLER
383-400-440 V8 l

240/248 .540"/.545" 112 107

426-572 HEMI V8 l

262/266 .628"/.608" 114 109

10"

FORD
12"

This camshaft works great when matched with Pro-Flo 2 system #35210 and Performer RPM
cylinder heads #60255; this combo produces 384 HP / 347 ft.-lbs. of torque. (D,E)

#2221

351W V8 l

235/238 .573"/.582" 112 107

10"

This camshaft works great when matched with RPM Air-Gap Dual Quad #75354
and Performer RPM cylinder heads #60255; this combo produces 438 HP / 413 ft.-lbs.
of torque (D,F).

#2281

5.0L V8 l

220/220 .498"/.498" 110 110

13"

This camshaft works great when matched with Performer intake manifold #3821 and
Performer cylinder heads #60379; this combo produces 300 HP / 325 ft.-lbs. of torque.
May use original hydraulic roller lifters. For mass-air engines only. (D)

#3722

50-State Legal E.O. #D-215-14.

ACCESSORIES

227/234 .520"/.520" 112 107

WATER PUMPS

289-302 V8 ll

CRATE ENGINES

This camshaft works great when matched w/ Performer RPM manifold #71187,
Thunder Series AVS carb #1813 and E-CNC 215 cylinder heads #79949; this combo
produces 430 HP / 420 ft.-lbs. of torque. (D)

EFI

SUPERCHARGERS

12"

POWER PACKAGES KITS

220/220 .510"/.510" 111 108

CAMSHAFT & VALVETRAIN

LS1/LS6 (1997-04 Gen III) l

MANIFOLDS GASKETS CYLINDER HEADS

Application
CHEVROLET

Duration Lift
Intake
Optional
@ .050 @ Valve Lobe Center
Valve
Int/Exh Int/Exh Seps. Line Vacuum Springs Cam Features

NITROUS

(C) Must be used with a Thrust Button.

(D) Use with high stall torque converter only.
(E) Use only stock ratio rocker arms.
(F) Will not work with stock valve springs.

EMISSIONS GUIDE

Important Application Information

Rollin Thunder Hydraulic Roller cams are for street high-performance and racing
applications only not for heavy vehicles. Use with Edelbrock Performer RPM heads
(or other aftermarket heads), adjustable valvetrain components, high-performance
adjustable rocker arms, screw-in studs and at least 9.5:1 compression ratio. Headers,
high-energy ignitions, lower-than-stock rear gearing and a high-performance torque
converter (in auto. transmission equipped vehicles) are necessary.

PLEASE REFER TO PAGE 212 FOR MORE INFORMATION REGARDING THE EMISSIONS GUIDE.

124

INDEX

l 50-STATE LEGAL l RACING ONLY l PRE-POLLUTION CONTROLLED VEHICLES l STOCK REPLACEMENT l ENGINE SWAP

SPORTSWEAR

(A) Requires aftermarket computer chip

(not available from Edelbrock) for use
with manifold #3713. Call Edelbrock
Tech 800-416-8628 for info
(B) Complete Valve Spring Kits available
from Edelbrock (see pages 117-118).

FUEL PUMPS

Important Footnotes

CARBURETORS
CYLINDER HEADS GASKETS MANIFOLDS

LIFTER KITS

Hydraulic Roller Camshaft

Kit #22096

CAMSHAFT & VALVETRAIN

HYDRAULIC ROLLER CAMSHAFT KITS

These complete cam kits include an Edelbrock Rollin Thunder hydraulic roller camshaft, Edelbrock improved
hydraulic roller lifters and pushrods that are dyno-matched for a trouble-free installation. Each kit includes an
Edelbrock Rollin Thunder Hydraulic Camshaft, hydraulic roller lifters, lifter guides, hold-down spider (only on
1987-later applications) and pushrods. These kits can produce great performance gains when matched with the
rest of the Edelbrock Total Power Package. See pages 123-124 for detailed camshaft specifications.

KITS POWER PACKAGES

Complete kit gives you everything you need to upgrade your camshaft
Rollin Thunder hydraulic roller cams feature more aggressive profiles
than conventional cams without excessive valve overlap
Virtually eliminate break-in problems no special break-in required over flat tappet cams
Higher lift velocity and faster valve action produces superior horsepower and torque
Get more horsepower and torque without sacrificing idle quality and manifold vacuum
Reduced friction improves fuel economy

SUPERCHARGERS

For S/B Chevy (1957-86) includes Rollin Thunder Hydraulic Roller cam #2208 l...............................#22085
For S/B Chevy (1987 & later) includes Rollin Thunder Hydraulic Roller cam #2209 l .......................#22096
For S/B Chevy (1957-86) includes Rollin Thunder Hydraulic Roller cam #2201 l...............................#22015
For S/B Chevy (1987 & later) includes Rollin Thunder Hydraulic Roller cam #2204 l .......................#22046
For S/B Chevy 383 (1987 & later) includes Rollin Thunder Hydraulic Roller cam #2207 l ................#22076
For S/B Ford 351W (1969-93) includes Rollin Thunder Hydraulic Roller cam #2281 l.......................#22815

EFI

HYDRAULIC ROLLER LIFTER KITS

CRATE ENGINES

Edelbrocks high performance hydraulic roller lifters for small-block Chevy, W-series Chevy, big-block
Chevy, small-block, big-block Chrysler, small-block Ford and FE Ford are the perfect match for street and
high performance applications. With unsurpassed tolerance capable of high rpm power, these precision
self-aligning retro-fit hydraulic roller lifters are designed for use in early model non-roller engine blocks
originally equipped with conventional lifters. Sold in complete sets of 16.

ID Micro
Finish
for Superior
Sealing
Exclusive
Unique
Piston Honing
Process
Developed by
Edelbrock

INDEX

SPORTSWEAR

FUEL PUMPS

NITROUS

ACCESSORIES

WATER PUMPS

Made of
86L20 Steel

Cutaway of Hydraulic Roller Lifter

Edelbrock core products

are manufactured in the
USA for unsurpassed
quality.

125

TrueBore
Honed for
Tight
Piston Wall
Tolerances
.700"
Diameter
Crowned
Roller

Allows the use of a modern roller

camshaft in non-roller cam blocks
Lifters are made from 86L20 steel and the
case is heat-treated to 50-52c hardness
to a depth of .010" - .015"
Each lifter is tested and assembled
to high quality standards
Hydraulic Roller Lifter Kit #97433 for big-block Chevy
Lifters are tied together for precision alignment
Tight ID tolerances allow for better control at higher RPM
Outside finish has a R.E.M. micro finish at 2 RMA
Lifters are designed for easy drop in replacement without block modifications
Highest quality lifters at a competitive price
S/B Chevy (1986 & earlier) and 348/409 W-series Chevys .................................................................#97423
B/B Chevy (1990 & earlier Mark IV)............................................................................................................#97433
S/B Chrysler (318-340-360)...........................................................................................................................#97413
B/B Chrysler (383-400-440) ..........................................................................................................................#97483
S/B Ford (289/302 1962-87, 351W 1969-93) .................................................................................................#97453
B/B Ford FE (390-428)....................................................................................................................................#97393
Important Note: Hydraulic Roller Lifter kits #97423 and #97433 will require shorter than stock pushrods.
See page 115 for a complete listing of Edelbrock hardened steel pushrod sets.

WWW.EDELBROCK.COM

CARBURETORS

VALVETRAIN & GEAR DRIVES

FOR 1987-LATER SMALL-BLOCK CHEVY BLOCKS

Edelbrocks high performance hydraulic roller lifters for 1987 and later small-block Chevys are the perfect match
for Edelbrock Rollin Thunder hydraulic roller cams. They are a drop-in replacement for 1987 and later blocks that
accept factory roller camshafts. These precision hydraulic roller lifters feature tight ID tolerances that allow
for better control at higher RPM and a micro finish OD for reduced friction.
For S/B Chevy (1987 & Later) Originally Equipped with Hydraulic Roller Camshaft (Qty. 16)..........#97384
For S/B Chevy (1987 & Later) Originally Equipped with Hydraulic Roller Camshaft (Qty. 1) ...........#97385
Original Equipment Style
Hydraulic Roller Lifters #97384

LIFTER INSTALLATION KIT

HIGH PERFORMANCE BREAK-IN OIL

HIGH PERFORMANCE ZINC ADDITIVE

Zinc Additive #1074

ENGINE ASSEMBLY LUBE

ACCU-DRIVE CAMSHAFT GEAR DRIVES

Engine Assembly Lube #1075

#7895

EMISSIONS GUIDE

PLEASE REFER TO PAGE 212 FOR MORE INFORMATION REGARDING THE EMISSIONS GUIDE.

126

INDEX

l 50-STATE LEGAL l RACING ONLY l PRE-POLLUTION CONTROLLED VEHICLES l STOCK REPLACEMENT l ENGINE SWAP

SPORTSWEAR

#7892

Important Note: Accu-Drive Gear Drives are not recommended for use above 7,000 rpm or on computer-controlled vehicles
with knock sensors. #7890 - On some late-model engine blocks, it will be necessary to check clearance behind cam gear
at the engine block at the 12 oclock position. Make sure gear clears oil galley bosses on block when in the most rearward
position. Grind or machine block for clearance. Clean block before assembling. Not applicable to stock Chevy hydraulic
roller-lifter cam-equipped engines. #7892 - On 1962-64 vehicles, discard original spacer & thrust plate. Use Ford thrust plate
#C9OZ-6269-A. On 1965-72-1/2 vehicles, discard original 2-piece eccentric. Use 1-piece eccentric Ford #C3AZ-6287-B.

FUEL PUMPS

Chevy 262-400 V8 (1957-95) ll..................................................................................................................#7890

Chevy 396-454 V8 (1965-90) ll..................................................................................................................#7891
Ford 289-302 V8 (1962-85), 351-Windsor (1969-96)
Ford 5.0L (1985-95 hydraulic roller lifter cams) ll .................................................................................#7892
Pontiac 326-455 V8 (1955-82) ll...............................................................................................................#7895

NITROUS

Accurate timing control No chain to stretch

Provides multiple cam timing adjustments for optimum performance
Smooth cam rotation for precise valve timing

ACCESSORIES

#7891

WATER PUMPS

#7890

The Accu-Drive camshaft gear drive kit replaces a stock timing chain with a precision gear drive system
utilizing a compound gear drive train. The gear drive can be easily installed. Just replace the stock crank
and camshaft sprockets with Accu-Drive gears and slip in the idler assembly. Most Accu-Drives require
no modifications to the engine block, although some fitting of the axles and front cover may be required.
The Accu-Drive gear drive system transmits power from the crankshaft gear to a full floating main idler which
drives the camshaft gear. A unique feature of the Edelbrock Accu-Drive system is the ability of the main idler
gear to float to an optimum position between the crankshaft and camshaft gears, assuring absolutely equal
load sharing between the crankshaft and the camshaft gears. The gears are made from billet SAE-1144 steel
with induction hardened teeth. Gear teeth are shaved for precision operation. The set features hardened and
ground idler pins from billet steel and are compatible with all standard camshafts.

CRATE ENGINES

Torco Engine Assembly Lube is favored by professional mechanics for assembling pistons, camshafts
and valvetrain components. Engine Assembly Lube is a high viscosity oil soluble lubricant which contains
a concentrate of anti-wear and anti-friction chemistries featuring the highest degree of protection.
Torco Engine Assembly Lube (Single 1 oz. Tube) ...................................................................................#1075

EFI

Premium Break-In Oil #1070

SUPERCHARGERS

Edelbrocks High Performance Zinc Additive is designed for hot rods, sports cars, muscle cars and exotics.
With a special formula of zinc, phosphorous and moly, it's the ideal chemistry to add wear protection to any
motor oil. Because it wont rub, scrape or wear off, it is perfect for cold starts and infrequently driven vehicles.
Also extends engine life and increases mileage and horsepower. One bottle treats up to 6 quarts/liters of oil.
High Performance Zinc Additive (Single 1 qt.) ........................................................................................#1074
High Performance Zinc Additive (Case 12 qts.) ......................................................................................#1084

POWER PACKAGES KITS

Lifter Installation Kit #97386

A unique blend of hydro-processed petroleum base stocks and additives is ideal for preparing metal
surfaces in new and rebuilt engines. The high zinc content ensures proper separation of all critical mating
surfaces, giving camshafts and valvetrain components a protective layer of hydrodynamic film during the
crucial break-in process. The first startup of any engine is critical to its performance; this formula provides
the correct amount of cleaning agents vital to newly machined parts.
Premium SAE 30 Break-In Oil (Single 1 qt.) .............................................................................................#1070
Premium SAE 30 Break-In Oil (Case 12 qts.) ...........................................................................................#1080

CAMSHAFT & VALVETRAIN

This kit provides the necessary components to install replacement hydraulic roller lifters in a 1987 and later
S/B Chevrolet and 1996 and later B/B Chevrolet. Includes original-spec lifter guides and hold down spider.
For S/B Chevy (1987 & Later) Originally Equipped with Hydraulic Roller Camshaft .........................#97386
For B/B Chevy (1996 & Later Gen VI) Originally Equipped with Hydraulic Roller Camshaft............#97387

MANIFOLDS GASKETS CYLINDER HEADS

HYDRAULIC ROLLER LIFTERS

CARBURETORS
CYLINDER HEADS GASKETS MANIFOLDS
CAMSHAFT & VALVETRAIN
KITS POWER PACKAGES

PERFORMER-LINK TIMING CHAIN SETS

TRUE-ROLLER TIMING CHAIN SETS

#7807

Year

V8 290, 304, 343, 360, 390, 401

V8 215
V6 198, 225, 231 w/o integral distributor drive
V6 183, 196, 231, Turbo, 252
w/ integral distributor drive

Emission
Code Footnotes
l

Part
No. Application
CHRYSLER
#7818 V6 238 (3.9L)

V8 270, 273, 315, 318, 325, 326, 331, 340, 354,

#7828 360, 392
#7828 V8 361, 383, 400, 426, 440 (1 bolt)

1961-63
1962-77

ll
ll

1977-88

ll

#7829 V8 361, 383, 400, 426, 440 (3 bolt)

Late
1967-76

#7840 V8 221, 260, 289, 302, 351W (from 3-21-84)

BUICK
V8 400-430-455

Year

Emission
Code Footnotes

Part
No.

1987-90

ll

#7803

1956-90

ll

#7803

1955-80

ll

1955-80

ll

#7804
#7805

1984-95

ll

1984-95

#7811
#7814
#7820
#7808
#7821
#7830

FORD

V8 221, 260, 289, 302, 351W (from 3-21-84)

CHEVROLET

ll
V8 255, 289, 302, 302 Boss, 351W (to 3-21-84) 1962-84

ll
V6 (90) 200, 229 (3.8L), 262 (4.3L)
1978-86
A
#7800 V8 332, 352, 360, 390, 406, 410, 427, 428
ll
1963-76

ll
V6 (90) 200, 229 (3.8L), 262 (4.3L)
1978-86
A,C
#7802 V8 351C, 351M/400
ll
1969-82

ll
V6 (90) 262 (4.3L)
1987-95
B
#7801
ll
V8 429/460
1968-87

ll
V8 262, 265, 267, 283, 302, 305, 307, 327, 350, 400 1955-95
A
#7800
ll
V8 305, 350
1987-95
B
#7801 OLDSMOBILE
ll
1965-90

#7813
l
V8 262-400
1955-95
A,C
#7802 V8 260, 307, 330, 350R, 400, 403, 425, 455
ll
V8 348/409 "W-Series"
1958-65

#7807 PONTIAC
l
V8 366, 396, 402, 427, 454
1965-95
C
#7809 V8 287, 316, 326, 347, 350P, 370, 389, 400, 421,
ll
1955-82

#7812
ll
V8 366, 396, 402, 427, 454
1965-95

#7810 428, 455

Gen VI 454, 502
1996-Later ll

#7816
Installation Notes: #7811: For 302 (5.0L) and 351W engines originally equipped with two-piece fuel pump eccentric or fuel injection. #7814: For 302 (5.0L) and 351W engines originally
equipped with two-piece fuel pump eccentric or fuel injection. #7820: For 221, 255, 260, 289 standard, Boss 302, High Output 351W, and standard High Output engines originally
equipped with one-piece fuel pump eccentric.

RPM-LINK TIMING CHAIN SETS

CRATE ENGINES

ADJUSTABLE TRUE-ROLLER TIMING CHAIN SETS

WATER PUMPS

Now, you can dial-in your camshaft with ease with our RPM-Link Roller Timing Chain Set. These sets bolt
onto your engine just like any other timing chain set, so theres no machining required and no need for
special offset bushings for installation. Made from induction hardened billet steel, it allows for a quick
cam timing adjustment to plus or minus six degrees without removal from the engine.

Timing Chain Set #7331

Application
Chevy 262-400 V8 (1955-95)
Chevy 5.0L, 5.7L V8 (1987-95)
Chevy LS1, LS2 & LS6 (1997-06)
Chevy LS7 (2005-Later)
Chevy 396-454 V8 (1965-95)
Ford 221-351W V8 (1962-84)

Emissions
Code
Footnotes
lll
A
ll
B
ll

ll

lll
A
lll

Part No.
#7331
#7332*
#7343
#7344*
#7334*
#7335*

VICTOR-LINK TIMING CHAIN SET

FOR HIGH-PERFORMANCE & COMPETITION

NITROUS

ACCESSORIES

1967-91

Performer-Link timing chain sets are for use with Edelbrock or stock cams. They have a solid-bushing
chain for a true bearing surface that rolls with the sprockets, eliminating chain stretch. Cam sprockets are
made from 35,000 psi tensile strength cast iron. Crank sprockets are made from billet SAE-1144 steel and
induction heat treated. All other sets have three keyway setting points to ensure accurate timing selection
for early or late-model vehicles. Performer-Link timing sets are not for use above 6500 rpm.

BUICK, OLDS, PONTIAC V6 & 215 V8

FUEL PUMPS
SPORTSWEAR
INDEX

#7808

Application
AMC

EFI

SUPERCHARGERS

TIMING CHAINS

Victor-Link Timing Chain Set #7880

127

This timing chain and gear set is designed for high-performance street and competition small-block
Chevys operating in the 6500-8500 rpm range. #7880 withstands a higher operating range than other timing
chains due to the machined link holes and high-strength steel. In addition, the chain links and pins are
cold-hardened for greater strength and durability. Nine keyway setting points ensure precise timing
selection. Gears are machined from SAE-1144 stress proof steel, have a larger tooth contact area and
are induction hardened.
Victor-Link Timing Chain for S/B Chevys (1955-86) l ....................................................................... #7880
(A) Not applicable to OEM Chevrolet and Chrysler hydraulic roller-lifter camshaft equipped engines.
(B) For OEM hydraulic roller lifter cams only.
(C) Street legal timing chain sets include a heavy duty double roller chain, not a True Roller chain.
* Available while supplies last

WWW.EDELBROCK.COM

CARBURETORS

TIMING COVERS
FOR GM GEN III & IV LS SERIES ENGINES
Two-Piece Timing Cover
for LS1 & Early Model
Trucks #4254

These two-piece aluminum front covers allow quick camshaft removal and installation without the need
to remove the damper pulley or steering components. The cam can be installed and removed through
a window in the front of the cover which is sealed with a plate and o-ring for superior leak prevention.
Not for use with a double roller timing chain.
With Rear Mounted Cam Sensor (LS1 and early model trucks)............................................................#4254
With Front Mounted Cam Sensor w/hole (LS2 and later model trucks)..............................................#4255

CAMSHAFT & VALVETRAIN

Chrome Timing Cover #4860

for Small-Block Chevy

Two-Piece
Timing Cover
#4242 for
Small-Block
Chevy

The Inside of #4860 Features a Reinforcement Plate

for use with a Cam Thrust Button

CHROME TIMING COVER

FOR S/B CHEVY WITH WELDED REINFORCEMENT PLATE

ALUMINUM FRONT COVERS

TWO-PIECE FOR SMALL-BLOCK CHEVY

Important Note: #4242 will fit with Edelbrock short water pump.

ALUMINUM TIMING COVERS

Our die-cast polished timing covers for Chevrolet come with pan seal, allen head bolts, gaskets, washers,
and timing marker. #4240 wont fit 1987 & later; #4241 wont fit 1991 and later big-block Gen V & VI engines.
Small-Block Chevrolet ................................................................................................................................#4240
Big-Block Chevrolet ....................................................................................................................................#4241
Important Note: #4240 will fit with Edelbrock short water pumps. Compatible with short thrust buttons (.640") and timing
marker included. Not for use with #7890.

FOR SMALL-BLOCK FORD

FOR PONTIAC

EMISSIONS GUIDE

PLEASE REFER TO PAGE 212 FOR MORE INFORMATION REGARDING THE EMISSIONS GUIDE.

128

INDEX

l 50-STATE LEGAL l RACING ONLY l PRE-POLLUTION CONTROLLED VEHICLES l STOCK REPLACEMENT l ENGINE SWAP

SPORTSWEAR

This die-cast aluminum timing cover for Pontiac comes with pan seal, gaskets and timing marker.
Designed to fit 1969-79 350-455 c.i.d. Pontiac engines. Compatible with stock or Edelbrock Victor Series
aluminum water pump #8856.
Pontiac Timing Cover ..................................................................................................................................#4265

FUEL PUMPS

Important Note: #4250 will not fit with high volume oil pumps.

NITROUS

These die-cast aluminum timing covers for Ford are stock replacement parts for late model EFI 5.0L and
351W engines. Includes gaskets and crankshaft seal. Both are compatible with stock or Edelbrock Victor
Series aluminum water pumps.
1965-78 289 (non K-code) & 302, 1969-87 351W .......................................................................................#4250
1986-93 5.0L and 1988 & later 351W with reverse rotation water pump............................................#4251

ACCESSORIES

Timing Cover #4250

for Small-Block Ford

WATER PUMPS

FOR SMALL- AND BIG-BLOCK CHEVY

CRATE ENGINES

Timing Cover #4240

for Small-Block Chevy

EFI

This die-stamped two-piece front cover for small-block Chevys is made from .090" aluminum for light
weight and excellent strength. This attractive and unique design allows quick camshaft removal without
dropping oil pan or breaking oil pan seal. Includes all necessary gaskets, bolts and seals.
Will not fit 1987 and later engines. Note: If cam button is desired, a nylon cam button must be used.
Small-Block Chevrolet (may require modification to cover axle pin on gear drive) ..........................#4242
Replacement Gasket Kit..............................................................................................................................#4243

SUPERCHARGERS

This stamped steel timing cover for small-block Chevrolet has a reinforcement plate welded to the inside
of the cover for added strength. This timing cover is ideal for preventing camshaft walk when used with
a thrust button. Includes front crankshaft seal and features a bright chrome finish.
S/B Chevy Chrome Timing Cover (with Welded Reinforcement Plate)................................................#4860

POWER PACKAGES KITS

Two-Piece Timing Cover #4254

Installed with Cover Removed

Timing Cover #4265

for Pontiac

MANIFOLDS GASKETS CYLINDER HEADS

TWO-PIECE ALUMINUM TIMING COVERS

CARBURETORS

POWER PACKAGE GUIDE

DELIVERING SEAT-OF-THE-PANTS PROVEN
PERFORMANCE WITH NO GUESSWORK

To get great performance out of any engine, the components must work together. Since the early 1980s,
the Edelbrock Total Power Package System has solved the parts matching puzzle for many street
performance enthusiasts. Intake manifolds, camshaft kits, cylinder heads and carburetors are the core
of the Power Package and can be purchased one piece at a time or in a single box with our popular
Top End Kits on pages 133-135.

E-STREET PACKAGES

AFFORDABLE PERFORMANCE FROM IDLE TO 5500 RPM

Performer RPM E-Tec Power Package

Performer RPM E-Tec Package dyno test results

on a 350 Chevy. For more info see our
Performer RPM Crate Engine on page 175.

SUPERCHARGERS

PERFORMER PACKAGES

POWER FROM IDLE TO 5500 RPM

PERFORMER RPM PACKAGES

POWER FROM 1500 TO 6500 RPM

Check our Crate Engine Section (pages 171-180)

and Power Package Kits Section (pages 131-135)
for the whole package in one box!

EFI
CRATE ENGINES
WATER PUMPS
ACCESSORIES
NITROUS
FUEL PUMPS
SPORTSWEAR
INDEX

E-Street Power Packages are designed to deliver entry-level street performance and great driveability from
idle to 5500 rpm. These packages use Performer intake manifolds and camshafts, but feature our E-Street
cylinder heads. E-Street heads are designed for high performance street applications with hydraulic flat
tappet camshafts and feature larger than stock intake and exhaust ports to improve engine efficiency.

An Edelbrock Performer Power Package is designed to greatly increase performance and driveability in the
low- to mid-rpm range. Your stock engine will be more efficient, with the potential for increased mileage.
For late-model fuel injected vehicles, Performer intake manifolds offer performance improvements with
stock/OEM equipment compatibility.

KITS POWER PACKAGES

CAMSHAFT & VALVETRAIN

CYLINDER HEADS GASKETS MANIFOLDS

THE EDELBROCK TOTAL

POWER PACKAGE SYSTEM

The Performer RPM Power Package has a broad operating range for streetable performance and high-end
horsepower. The dual-plane, 180 design of the Performer RPM intake works with an Edelbrock carburetor
for great throttle response and power up to 6500 rpm. Our RPM Air-Gap manifolds have a unique air-gap
design for a cooler, denser intake charge and more power. The Performer RPM cam has more lift and
duration than most street cams with acceptable low-end torque while maintaining 10"-12" Hg @ idle.
Performer RPM Power Packages also help make your engine more efficient, with the potential for increased
mileage. Performer RPM heads are matched to the intake & available assembled with top-quality valvetrain
parts for maximum bolt-on power. All Performer RPM heads are now available with spring packages for
hydraulic flat tappet and hydraulic roller applications. Ideal for high-performance street and weekend
events, Performer RPM packages are for non-emission engines only. Because of the high rpm (above 5500)
capabilities of this package, a high-volume oil pump, adjustable rocker arms & high-performance pistons
with 9.5:1 compression are recommended.

PERFORMER & E-STREET POWER PACKAGES IDLE TO 5500 RPM

Application
AMC
343-401 V8 1970-91

Intake
Carburetor
Manifolds & or Throttle
EFI Systems (C) Body Size

Cylinder
Heads (C)

Camshaft
& Lifters

Timing Chain

Valve Springs Valve Springs Valve

For
Gear
For Edelbrock Spring
Kits
Drive OE Head (E)
Heads

#2131, #3731

500-650 cfm

#60139

#2132

#7818

#5832, #5932

#5792

(F)

#2146

650-800 cfm

#60049

#7840

#5792

#5792

(H)

#2101, #2601,
#2701
#2701
#2116, #2716
#2104, #2604
#3701
#3701
#3706
#3704
#2161, #3761
#2161
#3764

600-650 cfm (D)

#60759

#2102, #2103

#7331, #7800, #7802 #7890 #5802, #5902

#5825

#5894

#2102, #2103
#2102, #2103
#2102, #2103
#2102, #2103
#3702
#2102, #2103 (D)
#3702 (A)
#2162 (A)
#2162 (A)

#7331, #7800, #7802

#7331, #7800, #7802
#7331, #7800, #7802
#7331, #7800, #7802
#7331, #7800, #7802
#7331, #7800, #7802
#7331, #7800, #7802
#7334, #7809, #7810
#7334, #7809, #7810
#7334, #7809, #7810

#7890
#7890
#7890
#7890
#7890
#7890

#7891
#7891

#5802, #5902

#5802, #5902
#5802, #5902
#5802, #5902
#5802, #5902
#5802, #5902
#5862
#5862
#5862

#5767
#5767
#5767
#5825
#5825
#5767
#5767
#5745
#5745
#5745

#5894

#5894
#5894
#5894
#5894
#5894
#5895
#5895
#5895

#2177 (A)
#2192 (A)
#2192 (A)
#2192 (A)

#7803
#7804
#7804
#7804

#5877, #5977
#5892, #5992
#5892, #5992
#5892, #5992

#5792

(F)
(F)
(F)
(F)

BUICK
400-455 V8 1967-76

CHEVROLET
262-400 V8 1957-86
262-400 V8 1957-86 non-EGR (E-Street)
283-400 V8 w/Vortec or E-Tec 1957-99
305-400 V8 1987-95 non-EGR (A)
262-400 V8 1973-86 EGR (not H.O. or T.P.I.)
305 V8 EGR LG4/L69 1978-86
262-400 V8 EGR 1987-95
305, 350 V8 T.B.I. 1987-95
396-427-454 V8 1965-90
396-502 V8 1965-90 non-EGR (E-Street)
454 V8 T.B.I. 1987-95 (Mk IV) (Gen V)

600-650 cfm (D) #5073, #5089

600-650 cfm (D) #60979
600-650 cfm (A,D) #60859
600-650 cfm (D) #60759

#60759

#60859

#60859
600-800 cfm (D) #60479
600-800 cfm (D) #50459

#60499

CHRYSLER
318-360 V8 1964-91
361-383-400 V8 1959-79
413-440 V8 1959-79 (E-Street)
413-440 V8 1959-79

129

#2176, #3776
#2186
#2191
#2191

600-650 cfm (D)

600-800 cfm
750-800 cfm
750-800 cfm

#5093

CONTINUED ON THE NEXT PAGE

WWW.EDELBROCK.COM

CARBURETORS

POWER PACKAGE GUIDE

Carburetor
Intake
or Throttle
Manifolds &
EFI Systems (C) Body Size

Application
FORD

Camshaft
& Lifters

Timing Chain

Gear
Drive

Valve
Valve Springs Valve
Springs for for Edelbrock Spring
Kits
OE Head (E)
Heads

500-650 cfm (D)

500-650 cfm (D)

70mm (B)

600-650 cfm (D)

600-650 cfm (D)

600-650 cfm
600-800 cfm
650-800 cfm

#60329, #60359
#5023, #5025
#60329, #60359
#60379, #60399
#60379, #60399
#60379, #60399
#60329, #60359
#5023, #5025
#60329, #60359

#2122 (A)
#2122 (A)
#2122 (A)
#3722

#2182
#2182 (A)
#2182 (A)
#2172
#2106 (A)
#2167 (A)

#7335, #7811, #7814, #7820

#7335, #7811, #7814, #7820
#7335, #7811, #7814, #7820
#7811, #7814
#7811, #7814
#7811, #7814
#7335, #7811, #7814, #7820
#7335, #7811, #7814, #7820
#7811, #7814
#7821
#7808
#7830

#7892
#7892
#7892
#7892
#7892
#7892
#7892
#7892
#7892

#7894

#5822, #5922
#5822, #5922
#5822, #5922
#5822
#5822
#5822
#5882, #5982
#5822, #5922
#5882, #5982
#5872, #5972
#5806, #5906
#5867

#5825
#5767
#5825
#5825
#5825
#5825
#5825
#5767
#5825

#5896
#5896
#5896
(F)
(F)
(F)
(F)
#5896
(F)
(F)
(F)
(F)

#2711, #3711
#2151

500-650 cfm (D)

750-800 cfm (D)

#3712 (A)
#2152

#7813
#7813

#5812

(F)
(F)

#2156

600-800 cfm

#60579, #61579,
#61599

#2157 (A)

#7812

#7895

#5857

#5767

(F)

OLDSMOBILE
330-350-403 V8, 1964-85
400-425-455 V8, 1967-76

PONTIAC
350-455 V8 1965-79

PERFORMER RPM POWER PACKAGES 1500 TO 6500 RPM

Carburetor
Intake
or Throttle
Manifolds &
EFI Systems (C) Body Size

Timing Chain

650-800 cfm

#60119

#7132

#7818

#7101, #7501

650-800 cfm

#60719,# 60739, #60899

283-400 V8 w/Vortec or E-Tec 57-99 #7116, #7516

650-800 cfm

#60979, #60989

#7107
#7109

3809/3810
3809/3810

#61909
#61939

Application
AMC
343-401 V8 1968-91

#7530, #7531

Valve Springs Valve

Valve
Gear Springs for for Edelbrock Spring
Kits
Drive OE Head (E)
Heads

#5792

#5703

#5825

#5794

#5767

#5767 (H)
#5768 (H)

#5767
#5768

CHEVROLET
283-400 V8 (A) 1957-86

#5768

#7162, #2261 (G)

#7162, #2261 (G)
#2261 (G)

#7810, #7334
#7810, #7334
#7816

#7891
#7891

#5762
#5762
#5745

#5745
#5745
#5745

#5795
#5795

#7176, #7576
#7186
#7193

650-800 cfm
750-800 cfm
750-800 cfm

#60779
#60929
#60929

#7177
#7194
#7194

#7803
#7804
#7804

#5777
#5792
#5792

#5767
#5792
#5792

(F)
(F)
(F)

#7121, #7521
#7129
#7123
#7181, #7581

600-800 cfm
600-800 cfm
70mm (B)
650-800 cfm

#79259, #60229, #60259

#61699
#60399
#79259, #60229, #60259

#7122, #2221 (G)

#2281 (G)

#7182, #2281 (G)

#7811, #7820, #7335

#7820
#7811
#7811, #7820, #7335

#7892
#7892
#7892
#7892

#5722
#5792 (H)
#5722
#5722

#5768, #5825
#5792
#5825
#5768, #5825

#5796

(F)
(F)

#7183

650-800 cfm

#61695

#2281 (G), #97453

#7820

#7892

#5792 (H)

#5792

#7564
#7105
#7166, #7566

650-800 cfm
650-800 cfm
750-800 cfm

#61629
#60069
#60669, #60679

#7168
#7106
#7167

#7821
#7808
#7830

#5792 (H)
#5767
#5767

#5792
#5792
#5745

(F)
(F)

#7111

600-800 cfm

#60519 (A)

#7112

#7813

#5712

#5767

(F)

#7156

600-800 cfm

#60579, #60599 (D)

#7157

#7812

#7895

#5757

#5767

(F)

CHRYSLER
340-360 V8 1964-91
383-400 V8 1959-79
413-426-440 V8 1959-79

FORD
289-302 V8 1965-95
302 E-Boss
5.0L 1986-95
351W V8 1969-95
351 Clevor
(Cleveland heads on 351W block)
351C
390-428 FE 1958-76
429/460 V8 1968-87

OLDSMOBILE
350-403 V8 1964-85

PONTIAC
350-455 V8 1965-79

Important Footnotes

(E) Retainers and keepers available for these springs (for stock heads only)
(F) Retainers and keepers available separately
(G) Hydraulic roller cam (must be used with compatible valve springs)
(H) Replacement valve springs for Edelbrock heads only -will not fit stock heads

EMISSIONS GUIDE

PLEASE REFER TO PAGE 212 FOR MORE INFORMATION REGARDING THE EMISSIONS GUIDE.

130

INDEX

l 50-STATE LEGAL l RACING ONLY l PRE-POLLUTION CONTROLLED VEHICLES l STOCK REPLACEMENT l ENGINE SWAP

SPORTSWEAR

(A) Certain exclusions apply; read the listing for this part or call our Tech Line
(B) Throttle body must be used with matching EGR plate
(C) Manifolds, heads and water pumps also available with polished finish
(D) Not for computer controlled engines

FUEL PUMPS

#2215 (G), #2216 (G)

#60459, #79459
#60559, #79559
#79555

NITROUS

#79949

650-800 cfm
650-800 cfm
800 cfm

ACCESSORIES

650-800 cfm

WATER PUMPS

#7118
#7161, #7561
#7163, #7562
#2902

CRATE ENGINES

350 LT1
350 LT4
LM/LS Series 4.8, 5.3, 5.7, 6.0L
1998-02
396-454 V8 (oval-port) 1965-90
396-454 V8 (rect.-port) 1965-90
ZZ-502 V8 Gen V & Gen VI

#7102, #2201 (G)

#7800, #7331
#7890
#7102, #2201 (G),
#7800,
#7801,
#7331
#7890
#2204 (G)
#2108, #97384, #97383

#2108, #97384, #97383

EFI

Camshaft
& Lifters

SUPERCHARGERS

Cylinder
Heads (C)

POWER PACKAGES KITS

#2121
#2121
#3721, #3723
#3821
#3841
#3881
#2181
#2181
#3781, #3783
#2171, #3771
#2105
#2166, #3766

CAMSHAFT & VALVETRAIN

289-302 V8 Early Models 1965-95

289-302 V8 non-EGR (E-Street)
289-302 V8 EGR except EFI 1973-85
5.0L V8 EFI 1986-95 Mustang GT/LX
5.0L V8 EFI 1987-95 trucks
5.8L V8 EFI 1988-95 trucks
351W V8 1969-95
351W V8 non-EGR (E-Street)
351W V8 EGR except EFI 1973-95
351M-400 V8 1971-82
352-360-390-427-428 V8 1958-76
429/460 V8 1968-87 except EFI

Cylinder
Heads (C)

(CONTINUED)

MANIFOLDS GASKETS CYLINDER HEADS

PERFORMER & E-STREET POWER PACKAGES IDLE TO 5500 RPM

CARBURETORS

POWER PACKAGE TOP END KITS

Description

#2701

#5089

#2102 Included #9630

#7800 #8550 #8504

EFI Top End Kit for S/B Chevy 1957-86

338 389

#2701

#5089

#2117 Included #9630

#7800 #8550 #8504

396-454 B/B Chevy 1965-95

354 470

ll

#7161

#50459

#2162 Included

#7810 #8551 #8564

363 405

#2716

#60975

#2208

#97423

#9646

#7800 #8550 #8516

#7367
#6997

#2088

363 405

#2716

#60975

#2209

#97384

#9653

#7801 #8550 #8516

#7367
#6997

#2089*

410 408

#7501

#60899

#7102 Included #9630

#7800 #8550 #8504

#7361
#6997

#2098
#20984

435 435

#7516

#60975

#2201

#97423

#9646

#7800 #8550 #8516

#7367
#6997

#2099

435 435

#7516

#60975

#2204

#97384

#9653

#7801 #8550 #8516

#7367
#6997

#2097*

430 410

#7109

#61939

#2108

#97384

#9653

#7379

#2019*

460 460

#7516

#60985

#2231

#97423

#9646

#7800 #8550 #8516

#7367
#6997

#2093

Results on a 383 c.i.d. ZZ383 S/B w/9.5:1 compression

and late model hydraulic roller cam.

460 460

#7516

#60985

#2207

#97384

#9653

#7801 #8550 #8516

#7367
#6997

#2096*

348/409 W-Series V8 1961-65

396-454 B/B Chevy 1965-95

451 494

#7159

#60815

#2268

#97423

#9648

#7807 #8581 #8509

#7378

#2039

#7810 #8551 #8564

#7363
#6998

#2095

SUPERCHARGERS
EFI
CRATE ENGINES
ACCESSORIES

#7361
#6997
#7361
#6997
#7363
#6998

Results on a 350 c.i.d. S/B w/9.5:1 compression

and retro-fit hydraulic roller cam.

NITROUS

Bolt Kits Gasket

Timing
Kit
Lifters Pushrod Chain Head Intake Set Part No.

315 381

Results on a 350 c.i.d. S/B w/9.0:1 compression.

Results on a 350 c.i.d. S/B w/9.0:1 compression

and late model hydraulic roller cam.

FUEL PUMPS

Emissions Intake Cylinder

Code Manifold Heads Cam

S/B Chevy 1957-86

Results on a 350 c.i.d. S/B w/9.0:1 compression

and retro-fit hydraulic roller cam.

SPORTSWEAR

HP TQ

CHEVROLET E-STREET POWER PACKAGE KITS

Results obtained on a 350 c.i.d. S/B w/9.0:1 compression.

INDEX

The Edelbrock concept of selling dyno-matched components has been popular since 1987. However,
with the introduction our Power Package Top End Kits, now you can get the best Edelbrock performance
in-one-box, under one part number with no guesswork involved. These kits give you just about
everything you need to top off your engine and are available in four levels of performance ranging from
entry-level E-Street packages to street/strip Victor packages.
E-STREET TOP END KITS deliver entry-level affordable street performance and great driveability from idle
to 5,500 rpm. They include a Performer EPS intake manifold, E-Street cylinder heads, Performer hydraulic
flat tappet camshaft, timing chain, complete bolt kit and an Edelbrock gasket set.
PERFORMER TOP END KITS improve the performance and drivability in the low to mid rpm range.
These kits include Performer intake manifolds, Performer cylinder heads and Performer-Plus camshafts.
They are intended to make your engine more efficient, with the potential for increased mileage.
PERFORMER RPM TOP END KITS deliver improved performance in street applications in the 1,500 to 6,500
rpm range. They include Performer RPM or RPM Air-Gap intake manifold, Performer RPM cylinder heads,
hydraulic cam and lifters, timing chain (in most cases), complete bolt kits and an Edelbrock gasket set.
Select RPM Top End Kits are available with EnduraShine finish.
VICTOR TOP END KITS deliver the ultimate in high performance for street/strip applications.
Featuring Victor intake manifolds, E-CNC cylinder heads and Rollin Thunder Hydraulic Roller camshafts
with aggressive profiles for maximum power while retaining great drivability. Top off your Top End Kit with
your right Edelbrock carburetor for your application (page 11). All of the performance results below are real
results from engine dynamometer tests on factory short blocks.

Total Power Package Top End Kit #2098

WATER PUMPS

KITS POWER PACKAGES

CAMSHAFT & VALVETRAIN

CYLINDER HEADS GASKETS MANIFOLDS

ALL-IN-ONE-BOX PERFORMANCE

Results on a 454 c.i.d. B/B w/9.6:1 compression.

#2022
#2038
#2024

CHEVROLET RPM POWER PACKAGE KITS

S/B Chevy 1957-86

S/B Chevy 1987 & later

327-350 S/B Chevy 1957-86

Results on a 350 c.i.d. ZZ4 S/B w/9.5:1 compression

and flat tappet cam.

327-350 S/B Chevy 1957-86

350 S/B Chevy 1987 & later

Results on a 350 c.i.d. ZZ4 S/B w/9.5:1 compression

and late model hydraulic roller cam.

Chevy LT4 1992-97

Results on a 355 c.i.d. S/B w/10.5:1 compression

and hydraulic roller cam.

383-427 S/B Chevy 1957-86

Results on a 383 c.i.d. and retro-fit hydraulic roller cam.

383 S/B Chevy 1987 & later

Results on a 454 c.i.d. B/B w/9.6:1 compression

and flat tappet cam.

396-454 B/B Chevy 1965-95 Mark IV

Results on a 454 c.i.d. B/B w/9.6:1 compression.

502 B/B Chevy 1996 & later Gen V & VI

Results on a 502 Gen V B/B w/9.6:1 compression
and late model hydraulic roller cam.

#8550

540 539

ll

#7561

#60459

#7162 Included

540 539

#7561

#60455

#2261

#97433

#9647

#7810 #8551 #8564

#7363
#6998

#2079

611 573

ll

#2902

#77485

#2262

#7816 #8554 #8564

#7356

#2094

* Kits include Lifter Installation Kit #37386

131

WWW.EDELBROCK.COM

CARBURETORS

POWER PACKAGE TOP END KITS

HP TQ

Emissions Intake Cylinder

Code Manifold Heads Cam

Bolt Kits Gasket

Timing
Kit
Lifters Pushrod Chain Head Intake Set Part No.

CHEVROLET RPM POWER PACKAGE KITS (cont.)

CHECK OUR
WEBSITE FOR
DYNO RESULTS

#7118

#79949

#2218

#8596 #8515

#7386

#2080

LS2 engines 1997-04 w/o Timing Control Module

CHECK OUR
WEBSITE FOR
DYNO RESULTS

#71187

#79949

#2218

#8595 #8515

#7386

#2082

676 649

#2902

#79555

#2263

#97433

#9647

#7810 #8551 #8564

#7389

#2078

496-555 B/B Chevy 1995 & Later Mark IV & V

w/Rectangle Port Cylinder Heads
496-555 B/B Chevy 1996 & Later Gen VI
w/Rectangle Port Cylinder Heads
496-555 B/B Chevy 1965-95 Mark IV & V
w/Rectangle Port Cylinder Heads
LS1 engines 1997-04 w/Timing Control Module

CHECK OUR
WEBSITE FOR
DYNO RESULTS

#2902

#77425

#2264

#7816 #8551 #8564

#7389

#2073

CHECK OUR
WEBSITE FOR
DYNO RESULTS

#2907

#77425

#2263

#7810 #8554 #8564

#7389

#2072

CHECK OUR
WEBSITE FOR
DYNO RESULTS

#2907

#77425

#2263

#97433

#9647

#7810 #8554 #8564

#7389

#2074

CHECK OUR
WEBSITE FOR
DYNO RESULTS

#2908

#79949

#2219

#8596 #8515

#7386

#2081

LS2 engines 1997-04 w/o Timing Control Module

CHECK OUR
WEBSITE FOR
DYNO RESULTS

#29087

#79949

#2219

#8595 #8515

#7386

#2083

CHRYSLER RPM POWER PACKAGE KITS

340-418 S/B Chrysler 1967-91 w/Flat tappet cam 417 397

#7576

#60779

#7177 Included

#7803 #8555 #8579

#7370

#2049

383 B/B Chrysler 1968-79 w/Flat tappet cam

421 417

#7186

#60929

#7194 Included

#7804 #8591 #8594

#7366

#2086

440 B/B Chrysler 1968-79 w/Flat tappet cam

482 528

#7193

#60929

#7194 Included

#7804 #8591 #8594

#7366

#2087

426-572 Chrysler HEMI (Gen II)

705 620

#7524

#61175

#2212

#7805 #8513

#7349

#2052

321 337

ll

#2121

#5023

#2122 Included #9632

#7364
#6991

#2027

289-302 S/B Ford 1981 & earlier w/Flat tappet cam

367 340

ll

#7521

#2091
#20914

EFI

331-363 S/B Ford 1981 & earlier

438 413

#7521

351W S/B Ford 1969-95 w/Flat tappet cam.

400 412

#7581

351W S/B Ford 1969-95 w/Hydraulic roller cam

Results on a 351W Ford S/B w/9.5:1 compression.

451 433

#7581

#7364
#6991
#7364
#60255 #2281 #97453 #9658 #7820 #8552 #8524
#6991
#7364
#60259 #7182 Included #9636 #7820 #8553 #8584
#6991
#7364
#79259 #2281 #97453 #9659 #7820 #8553 #8584
#6991

302 block - 8.2" deck with Cleveland heads

w/Hydraulic roller cam (will not fit 351M/400)

438 413

#7129

#61695

#2221

#97453

#7820 #8562 #8529

#7377

#2059

351W block - 9.5" deck with Cleveland heads w/

438 414
hydraulic roller cam (will not fit 351M/400)

#7183

#61695

#2281

#97453

#7820 #8560 #8529

#7377

#2060

l
l

#7105
#7566

#60069
#60669

#7106 Included
#7167 Included

#7808 #8557 #8507

#7830 #8566 #8569

#7368
#7368

#2044
#2045

#7551

#60519

#7112 Included

#7813 #8558 #8514

#7373

#2058

Offers a choice of several built-in timing curves.

Requires Timing Control Module for LS2 58x ignitions.

CHEVROLET VICTOR POWER PACKAGE KITS

496-555 B/B Chevy 1965-95 Mark IV & V

Results on a 555 c.i.d. w/retro-fit hydraulic roller cam.

Offers a choice of several built-in timing curves.

Requires timing control module for LS2 58x ignitions.

Results on a 440 c.i.d. w/9.27:1 compression.

Results on a 528 c.i.d. w/10:1 compression.

FORD E-STREET POWER PACKAGE KITS

289-302 S/B Ford 1981 & earlier

Results on a 302 Ford S/B w/9.1:1 compression.

#7820 #8552 #8524

FORD RPM POWER PACKAGE KITS

Results on a 302 Ford S/B w/9.5:1 compression.

Results on a 351W Ford S/B w/9.5:1 compression.

418 434
506 536
OLDSMOBILE RPM POWER PACKAGE KITS

390-428 B/B Ford FE 1961-76

460-522 B/B Ford 1968-87

Results on a 455 c.i.d. w/9.5:1 compression.

450 541

#2092
#20924
#2090

PONTIAC RPM POWER PACKAGE KITS

l

#7156

#61519

#7157 Included

#7812 #8549 #8559

#7382

#2053

389-467 Pontiac with 87cc Cylinder Heads

CHECK OUR
WEBSITE FOR
DYNO RESULTS

#7156

#61529

#7157 Included

#7812 #8549 #8559

#7382

#2057

389-467 Pontiac with 87cc D-Port Cylinder Heads

CHECK OUR
WEBSITE FOR
DYNO RESULTS

#7156

#61579

#7157 Included

#7812 #8561 #8559

#7382

#2054

389-467 Pontiac with 72cc D-Port Cylinder Heads

CHECK OUR
WEBSITE FOR
DYNO RESULTS

#7156

#61599

#7157 Included

#7812 #8561 #8559

#7382

#2055

EMISSIONS GUIDE

PLEASE REFER TO PAGE 212 FOR MORE INFORMATION REGARDING THE EMISSIONS GUIDE.

132

INDEX

l 50-STATE LEGAL l RACING ONLY l PRE-POLLUTION CONTROLLED VEHICLES l STOCK REPLACEMENT l ENGINE SWAP

SPORTSWEAR

CHECK OUR
WEBSITE FOR
DYNO RESULTS

FUEL PUMPS

389-467 Pontiac with 72cc Cylinder Heads

NITROUS

400-500 B/B Oldsmobile

#2043

ACCESSORIES

Results on a 351W Ford S/B w/9.37:1 compression.

#7820 #8552 #8524

WATER PUMPS

Results on a 347 Ford S/B w/9.5:1 compression.

#7122 Included #9632

CRATE ENGINES

Results on a 347 Ford S/B w/9.5:1 compression.

#60229

POWER PACKAGES KITS

Results on a 383 c.i.d. short-block.

CAMSHAFT & VALVETRAIN

LS1 engines 1997-04 w/Timing Control Module

SUPERCHARGERS

MANIFOLDS GASKETS CYLINDER HEADS

Description

CARBURETORS

MANIFOLD & CARB KITS

VINTAGE

CYLINDER HEADS GASKETS MANIFOLDS

VINTAGE MANIFOLD AND CARB KITS

AVAILABLE FOR S/B CHEVY, S/B FORD
AND FLATHEAD FORD

CAMSHAFT & VALVETRAIN

Vintage Manifold and

Carb Kit #2018 with
Optional Fuel Log Kit #1287

Due to popular demand we are now offering street rodders the ultimate solution for adding dual, triple
or six deuce Edelbrock power! Edelbrock Vintage Manifold and Carb kits offer you the core components
you need to install an Edelbrock multiple carburetor and intake manifold setup on your small-block Chevy,
Small-block or Flathead Ford All in one box. They include a new Edelbrock intake manifold with two,
three or six of our new Edelbrock 94 carburetors. To make the installation simple, these kits include
straight throttle linkage and triple-deuce kits include our exclusive progressive throttle linkage #1033
originally designed by Vic Edelbrock Sr. back in the late 1950s for small-block Chevy. All kits also include
high-quality Edelbrock gaskets, carb studs and all of the necessary hardware for a hassle free installation.
Complete your multi-carb setup installation with the Edelbrock Mini Fuel Distribution Block Kit #1281 or
Fuel Log Kit #1283, #1284, #1288, or #1287. Edelbrock Fuel Kits provide everything you would need to
supply fuel to your intake manifold and carb setup. They feature high quality polished aluminum mini fuel
block or extruded aluminum, classic black neoprene hose, fittings and installation hardware.
Together with our Manifold and Carb Kits, you get bolt-on Edelbrock performance and classic looks.

KITS POWER PACKAGES

SMALL-BLOCK CHEVY
Triple Carb Kit for 1955-86 Small-Block Chevy (C-357-B intake manifold) l ................................... #2015
Triple Carb Kit for Small-Block Chevy with E-Tec or
Vortec-Style heads (C-357-B intake manifold) ll...................................................................................... #2016
Six Carb Kit for 283-350 Chevy (X1 Ram Log intake manifold) l ......................................................... #2018

SUPERCHARGERS

Vintage Manifold
and Carb Kit #2015 for
1955-86 S/B Chevy

FORD FLATHEAD
Dual Carb Kit for 1938-48 Ford Flathead (Super Dual intake manifold) l.......................................... #2011
Dual Carb Kit for 1938-48 Ford Flathead (Slingshot intake manifold) l ............................................. #2012
Triple Carb Kit for 1938-48 Ford Flathead (Triple Deuce intake manifold) l .................................... #2013
Triple Carb Kit for 1949-53 Ford Flathead (Triple Deuce intake manifold) l .................................... #2014
SMALL-BLOCK FORD
Triple Carb Kit for 289-302 V8 (Triple Deuce intake manifold) ll ..................................................... #2017

Note: See listings in the manifold section for manifold specs, see pages 81-82.

CRATE ENGINES

EFI

VINTAGE MANIFOLD AND CARB KITS INCLUDE

Throttle Linkage

Carb
Intake Intake Carb
Gasket Gaskets Bolt Kit Stud Kit Regulator

#1032 (Straight)
#1032 (Straight)
#1034 (Straight)
#1034 (Straight)
#1033 (Progressive)
#1033 (Progressive)
#1033 (Progressive)
#1031 (Straight)

Included
Included
Included
Included
Included
Included
Included
Included

#7234
#7234
#7234
#7234
#7201
#7235
#7220
#7201

#8504
#8516
#8524
#8504

#8006
#8006
#8006
#8006
#8006
#8006
#8006
#8006

#1789
#1789
#1789
#1789
#1789
#1789
#1789
#1789

INDEX

SPORTSWEAR

FUEL PUMPS

NITROUS

ACCESSORIES

WATER PUMPS

Vintage Manifold
and Carb Kit #2012 for
1938-48 Ford Flatheads

Kit Part Intake Offset Carb

No. Manifold Bracket Qty.
#2011 #1100 #1145 2

2
#2012 #1103
#2013 #1108 #1145 3
#2014 #1109 #1146 3

3
#2015 #5418

3
#2016 #5414

3
#2017 #5412

6
#2018 #2150

Vintage Manifold
and Carb Kit #2013 for
1938-48 Ford Flatheads

Edelbrock core products

are manufactured in the
USA for unsurpassed
quality.

133

Small-Block Ford
Vintage Manifold and
Carb Kit #2017

WWW.EDELBROCK.COM

CARBURETORS

SINGLE-QUAD MANIFOLD

& CARB KITS

AVAILABLE IN SATIN OR ENDURASHINE FINISH

With a Manifold and Carb Kit, its easy to upgrade your induction system with the best combination of
Edelbrock proven performance and looks in a single box. These kits include: an Edelbrock manifold,
Performer or Thunder Series AVS carb, chrome fuel inlet, intake gasket set, intake bolt set and carb
stud kit. The manifold and carbs are available with a standard satin finish or with our bright EnduraShine
chrome-like finish for long lasting show quality looks.

CHEVY SINGLE-QUAD KITS

Performer
Manifold & Carb Kit #20214

Both kits include the Thunder Series AVS 800 cfm carb
RPM Air-Gap manifold & carb kit for 340/360 Chrysler l ..........................................#2075 ..............#20754

PONTIAC SINGLE-QUAD KIT

CRATE ENGINES

Performer RPM manifold & Thunder Series AVS 800 cfm carb
for 1965-79, 389-455 ll ....................................................................................................#2056 ..............#20564

SATIN FINISH

ENDURASHINE FINISH

#8126
#8126
#8126
#8126
#8126
#8126
#8126
#8126
#8126
#8126
#8126
#8126
#8126
#8126
#8126
#8126
#8126
#8126

#7201
#7201
#7201
#7201
#7235
#7235
#7235
#7203
#7203
#7203
#7202
#7276
#7220
#7220
#7220
#7220
#7224
#7280

#8504
#8504
#8504
#8504
#8516
#8516
#8516
#8564
#8564
#8564
#8564
#8579
#8524
#8524
#8524
#8584
#8507
#8559

#8008
#8008
#8008
#8008
#8008
#8008
#8008
#8008
#8008
#8008
#8008
#8008
#8008
#8008
#8008
#8008
#8008
#8008

EMISSIONS GUIDE

Kit Part Intake

No. Manifold
#27014
#20214
#26014
#20224
#71014
#20234
#75014
#20244
#21164
#20274
#71164
#20284
#75164
#20294
#21614
#20614
#71614
#20624
#75614
#20634
#75624
#20644
#75764
#20754
#21214
#20314
#71214
#20324
#75214
#20334
#75814
#20344
#71054
#20374
#71564
#20564

Carb

Fuel
Line

#14064
#14064
#18134
#18134
#18064
#18134
#18134
#18134
#18134
#18134
#18134
#18134
#14064
#18134
#18134
#18134
#18134
#18134

#8126
#8126
#8126
#8126
#8126
#8126
#8126
#8126
#8126
#8126
#8126
#8126
#8126
#8126
#8126
#8126
#8126
#8126

PLEASE REFER TO PAGE 212 FOR MORE INFORMATION REGARDING THE EMISSIONS GUIDE.

#7201
#7201
#7201
#7201
#7235
#7235
#7235
#7203
#7203
#7203
#7202
#7276
#7220
#7220
#7220
#7220
#7224
#7280

#8504
#8504
#8504
#8504
#8516
#8516
#8516
#8564
#8564
#8564
#8564
#8579
#8524
#8524
#8524
#8584
#8507
#8559

#8008
#8008
#8008
#8008
#8008
#8008
#8008
#8008
#8008
#8008
#8008
#8008
#8008
#8008
#8008
#8008
#8008
#8008

134

INDEX

l 50-STATE LEGAL l RACING ONLY l PRE-POLLUTION CONTROLLED VEHICLES l STOCK REPLACEMENT l ENGINE SWAP

Intake Intake
Carb
Gaskets Bolt Kit Stud Kit

SPORTSWEAR

#1406
#1406
#1813
#1813
#1806
#1813
#1813
#1813
#1813
#1813
#1813
#1813
#1406
#1813
#1813
#1813
#1813
#1813

Intake Intake
Carb
Gaskets Bolt Kit Stud Kit

FUEL PUMPS

Fuel
Line

NITROUS

Carb

ACCESSORIES

Kit Part Intake

No. Manifold
#2701
#2021
#2601
#2020
#7101
#2023
#7501
#2004
#2116
#2007
#7116
#2028
#7516
#2029
#2161
#2061
#7161
#2062
#7561
#2063
#7562
#2064
#7576
#2075
#2121
#2031
#7121
#2032
#7521
#2033
#7581
#2034
#7105
#2037
#7156
#2056

SINGLE-QUAD MANIFOLD & CARB KITS INCLUDE

WATER PUMPS

SINGLE-QUAD MANIFOLD & CARB KITS INCLUDE

EFI

Performer RPM
Manifold & Carb Kit #20564

FOR SMALL-BLOCK FORD

Performer manifold & Performer Series 600 cfm carb ll........................................#2031 ..............#20314
Performer RPM manifold & Thunder Series AVS 800 cfm carb ll ........................#2032 ..............#20324
RPM Air-Gap manifold & Thunder Series AVS 800 cfm carb ll ............................#2033 ..............#20334
RPM Air-Gap manifold & Thunder Series AVS 800 cfm carb for 351W Ford ll ..#2034 ..............#20344
FOR BIG-BLOCK FORD
Performer RPM manifold & Thunder Series AVS 800 cfm carb for Ford FE l .......#2037 ..............#20374

SUPERCHARGERS

FORD SINGLE-QUAD KITS

POWER PACKAGES KITS

CHRYSLER SINGLE-QUAD KIT

CAMSHAFT & VALVETRAIN

RPM Air-Gap
Manifold & Carb Kit #2033

FOR 1957-86 SMALL-BLOCK CHEVY

Satin
EnduraShine
Performer EPS manifold & Performer Series 600 cfm carb l ...................................#2021 ..............#20214
Performer Air-Gap manifold & Performer Series 600 cfm carb l ............................#2020 ..............#20224
Performer RPM manifold & Thunder Series AVS 800 cfm carb l ............................#2023 ..............#20234
RPM Air-Gap manifold & Thunder Series AVS 800 cfm carb l ................................#2004 ..............#20244
FOR SMALL-BLOCK CHEVY WITH VORTEC OR EDELBROCK E-TEC CYLINDER HEADS
Performer manifold & Thunder Series AVS 650 cfm carb l ......................................#2007 ..............#20274
Performer RPM manifold & Thunder Series AVS 800 cfm carb l ............................#2028 ..............#20284
RPM Air-Gap manifold & Thunder Series AVS 800 cfm carb l ................................#2029 ..............#20294
FOR BIG-BLOCK CHEVY
All these kits include the Thunder Series AVS 800 cfm carb
Performer manifold & carb kit (oval port) ll ..............................................................#2061 ..............#20614
Performer RPM manifold & carb kit (oval port) ll ....................................................#2062 ..............#20624
RPM Air-Gap manifold & carb kit (oval port) ll ........................................................#2063 ..............#20634
RPM Air-Gap manifold & carb kit (rect. port) ll .......................................................#2064 ..............#20644

MANIFOLDS GASKETS CYLINDER HEADS

SINGLE-QUAD MANIFOLD AND CARB KITS

CARBURETORS

MANIFOLD & CARB KITS

DUAL-QUAD

CYLINDER HEADS GASKETS MANIFOLDS

RPM DUAL-QUAD MANIFOLD AND CARB KITS

AVAILABLE IN SATIN OR ENDURASHINE FINISH

A huge hit among street rodders, these Dual-Quad Kits offer the ultimate set-up for anyone who wants the
look and the performance of dual-quad carbs. They include an Edelbrock RPM or RPM Air-Gap Dual-Quad
intake manifold and two 500 cfm Thunder Series AVS carburetors calibrated specifically for dual-quad
applications (one manual choke, one electric choke). To make the installation simple, these kits also include
our high-tech progressive throttle linkage, Russell fuel inlet, high-quality Edelbrock intake gaskets, intake
bolt set and carburetor stud kit. The manifold and Thunder Series carbs are available with a standard satin
finish or with our bright EnduraShine chrome-like finish for long lasting show quality looks.

CHEVY DUAL-QUAD KITS

CAMSHAFT & VALVETRAIN

Dual-Quad
Manifold & Carb Kit
#20264 with EnduraShine Finish

Satin
EnduraShine
For 1957-86 Small-Block Chevy l ..............................................................................#2025 ...................#20254
For Small-Block Chevy with 1996 & later Vortec L31 or E-Tec heads l ............#2026 ...................#20264
For Small-Block Chevy LS1 (A) l ...............................................................................#2068 ...................#20684
For 348/409 W-Series Chevy, Small Port (B) l.....................................................#2067 ...................#20674
For 348/409 W-Series Chevy, Large Port (for use with Edelbrock heads) (B) l ....#2069 ...................#20694
For Big-Block Chevy with oval ports ll ................................................................#2065 ...................#20654
For Big-Block Chevy with rectangular ports ll ...................................................#2066 ...................#20664

CHRYSLER DUAL-QUAD KIT

KITS POWER PACKAGES

For Chrysler 5.7L HEMI (requires Ignition Control Module #91239) l ....................#2076 ...................#20764
Timing Control Module (sold separately) l ............................................................................................#91239

FORD DUAL-QUAD KITS

For 289-302 Ford ll .....................................................................................................#2035 ...................#20354

For 351W Ford l.............................................................................................................#2085 ...................#20854
For 390-428 Big-Block Ford FE ll ............................................................................#2036 ...................#20364
Note: See listings in the manifold section for manifold specs.
(A) Includes ignition control module, wiring harness and MAP sensor
(B) Includes Oil Filler Tube with matching breather cap #4803

INDEX

SPORTSWEAR

FUEL PUMPS

NITROUS

ACCESSORIES

WATER PUMPS

CRATE ENGINES

EFI

SUPERCHARGERS

Dual-Quad
Manifold and
Carb Kit #20354
with EnduraShine Finish

Dual-Quad
Manifold and
Carb Kit #2025
with Satin Finish

SATIN FINISH

RPM AIR-GAP DUAL-QUAD MANIFOLD & CARB KITS INCLUDE

Carburetors
Kit Part Intake
Throttle
No. Manifold Electric Manual Linkage
#7525
#1803 #1804 #7094
#2025
#7526
#1803 #1804 #7094
#2026
#7535
#1803 #1804 #7094
#2035
#7505
#1803 #1804 #7094
#2036
#7520
#1803 #1804 #7094
#2065
#7522
#1803 #1804 #7094
#2066
#5408
#1803 #1804 #7094
#2067
#7518
#1803 #1804 #7094
#2068
#5409
#1803 #1804 #7094
#2069
#7528
#1803 #1804 #7094
#2076
#7585
#1803 #1804 #7094
#2085

135

Carb
Fuel Intake Intake Stud
Line Gaskets Bolt Kit Kit
#8091
#8091
#8091
#8091
#8091
#8091
#8091
#8091
#8091
#8091
#8091

Dual-Quad
Manifold & Carb Kit
#20684 with EnduraShine Finish

Dual-Quad
Manifold & Carb Kit
#20674 with EnduraShine Finish

#7201
#7235
#7220
#7224
#7203
#7202
#7242
#7240
#7220

#8504
#8516
#8524
#8536
#8564
#8564
#8509
#8509
#8528
#8584

#8008
#8008
#8008
#8008
#8008
#8008
#8008
#8008
#8008
#8008
#8008

ENDURASHINE FINISH

RPM AIR-GAP DUAL-QUAD MANIFOLD & CARB KITS INCLUDE

Carburetors
Kit Part Intake
Throttle
No. Manifold Electric Manual Linkage
#20254 #75254 #18034 #18044 #7094
#20264 #75264 #18034 #18044 #7094
#20354 #75354 #18034 #18044 #7094
#20364 #75054 #18034 #18044 #7094
#20654 #75204 #18034 #18044 #7094
#20664 #75224 #18034 #18044 #7094
#20674 #54084 #18034 #18044 #7094
#20684 #75184 #18034 #18044 #7094
#20694 #54094 #18034 #18044 #7094
#20764 #75284 #18034 #18044 #7094
#20854 #75854 #18034 #18044 #7094

Carb
Fuel Intake Intake Stud
Line Gaskets Bolt Kit Kit
#8091
#8091
#8091
#8091
#8091
#8091
#8091
#8091
#8091
#8091
#8091

#7201
#7235
#7220
#7224
#7203
#7202
#7242
#7240
#7220

#8504
#8516
#8524
#8536
#8564
#8564
#8509
#8509
#8528
#8584

#8008
#8008
#8008
#8008
#8008
#8008
#8008
#8008
#8008
#8008
#8008

WWW.EDELBROCK.COM

CARBURETORS

SUPERCHARGERS

Photo courtesy Power Automedia

Edelbrock E-Force Supercharger systems deliver excellent horsepower and torque in a complete kit.
Featuring a unique design with minimal components. It makes it possible to fit an E-Force Supercharger
under the stock hood. The core of each system is the Eaton Gen VI 2300 or 1320 TVS Supercharger rotating
assembly with a four lobe design with 160 of twist for maximum flow, minimum temperature rise and quiet
operation for excellent drivability. We also designed our superchargers with an integrated bypass valve to
help eliminate parasitic loss under light throttle, improving mileage potential. Our unique and efficient inlet
configuration results in a shorter, less restrictive intake path for improved air flow, without the need for a
jack-shaft. Keeping the air cool is a high capacity air to water intercooler and low temp heat exchanger.
Edelbrock supercharger systems are available in three performance levels for most applications.

STAGE 1 - STREET SYSTEMS

STAGE 2 - TRACK SYSTEMS

These systems include the components from the Stage 1 system with the addition of a cold air intake
(if required), smaller pulley, fuel injectors (if required), fuel pump (if required) and a custom tune, giving
you great performance for the track. These systems are for competition racing only (except for our
Corvette systems, which are emissions legal) and are available as a complete kit or as an upgrade.
Our Professional Tuner systems include all of the essential components that a racer would need to build
a custom supercharged racing setup. They offer flexibility in pulley selection, cold air intake and more.
These systems are for competition racing use only.
Finally... the Edelbrock E-Force Supercharger system is not just a performance upgrade, it also has great
looks! The supercharger assembly and aluminum coil covers (on most applications) are powder coated
for durability and provide a unique appearance that will give any engine compartment a custom look.

High capacity air to water

intercooler system with 110
square inch intercooler and
dual core low temp radiator

WATER PUMPS

Specially designed 85mm

electronic throttle body with
injection molded plastic
gearing for OEM reliability
(2005-10 Mustang only)

CRATE ENGINES

High Flow Mass Air Flow Sensor (as needed)

Little to no decrease in fuel economy
Limited powertrain warranty
Unique design allows maximum low end torque
and instant throttle response
50-state emissions street legal
(Stage 1 & Stage 2 Corvette Systems)

EFI

Everything fits right out of the box, no welding,

cutting or grinding
Eaton TVS Rotor assembly
Self contained oil system
(no drilling or plumbing required)
Electronic PCM programming module, with
Stage 1 & Stage 2 application specific tuning

SUPERCHARGERS

E-FORCE FEATURES & BENEFITS

POWER PACKAGES KITS

STAGE 3 - PROFESSIONAL TUNER SYSTEMS

CAMSHAFT & VALVETRAIN

These systems are emissions legal and provide the best combination for your daily driver. They will also
include a tune for both 91 and 93 octane, on select applications.

MANIFOLDS GASKETS CYLINDER HEADS

AVAILABLE FOR POPULAR CHRYSLER, FORD,

GM, JEEP, SCION & SUBARU APPLICATIONS

Integrated bypass valve for

little to no decrease
in fuel economy

SPORTSWEAR

Ultra low
restriction inlet tube
REGISTERED TRADEMARK OF THE EATON CORPORATION

EMISSIONS GUIDE

PLEASE REFER TO PAGE 212 FOR MORE INFORMATION REGARDING THE EMISSIONS GUIDE.

136

INDEX

l 50-STATE LEGAL l RACING ONLY l PRE-POLLUTION CONTROLLED VEHICLES l STOCK REPLACEMENT l ENGINE SWAP

FUEL PUMPS

2300cc/rev Twin Vortices

(TVS) Rotor Group

NITROUS

41 lb/hr or
50 lb/hr fuel
injectors
(size varies by
application)

ACCESSORIES

15" long intake

runners for maximum
low end torque

Front drive, front inlet

configuration for short
intake path without the
use of a jack-shaft

CARBURETORS

CHRYSLER/DODGE HEMI

INDEX

SPORTSWEAR

FUEL PUMPS

NITROUS

ACCESSORIES

WATER PUMPS

CRATE ENGINES

EFI

SUPERCHARGERS

KITS POWER PACKAGES

CAMSHAFT & VALVETRAIN

CYLINDER HEADS GASKETS MANIFOLDS

SUPERCHARGERS

DOES YOUR HEMI NEED MORE POWER?

Then get an Edelbrock E-Force Supercharger system the most efficient supercharger on the market for the Chrysler 300, Challenger, Charger,
Magnum and Ram that's equipped with a 5.7L, 6.1L or 6.4L HEMI engine. These complete supercharger systems provide maximum flow, minimum
temperature rise, quiet operation and reliability only the Edelbrock name can guarantee. They feature minimum air restriction in and out of the
supercharger for optimal flow. They also include individual 7 long intake runners that allow for maximum low end torque and great drivability.
FEATURES

Supercharger Manifold Assembly (Featuring Eaton TVS Rotors)

New BHJ Crank Damper (SFI certified)
Cast Aluminum Idler Bracket
Heavy Duty Automatic Belt Tensioner
Large 92 sq-in Intercooler
Full Face, Low Temp. Heat Exchanger for Intercooler System
Goodyear Gatorback Serpentine Belt
Secondary 6-rib Supercharger Belt Drive with 7.50" Crank Pulley
Electric Intercooler Water Pump
Intercooler Recovery Tank
Custom Molded Intercooler Hoses
Extruded Aluminum Fuel Rails with -6 AN lines
Fuel Injectors (46 lb/hr)
Fuel Injectors (60 lb/hr)
Supercharger Pulley
Steel Idler Pulleys With Heavy Duty High Speed Bearings
High Flow Air Intake Tube & Filter
Edelbrock Aluminum Engine Covers
Handheld Calibration Module, Preloaded With All Tunes
Plug & Play, Electrical Harness & Installation Hardware
Limited Powertrain Warranty
High Flow Replacement Panel Filter
High Flow Fuel Pump

STAGE 1 KITS
STAGE 2 KIT
STAGE 3 KITS
#1530 #1532 #1536 #1534 #1535
#15352
#1531 #1533 #1537 #15343 #15353

3.875

3.875"

3.875"

3.25

3.00

2.75

HEMI is a registered trademarks of Chrysler Group LLC.

137

WWW.EDELBROCK.COM

CARBURETORS

CHRYSLER/DODGE HEMI SUPERCHARGERS

MANIFOLDS GASKETS CYLINDER HEADS

E.O. Number D-215-89

CAMSHAFT & VALVETRAIN

POWER PACKAGES KITS

Stage 1 System #1534

#15320
#15360
#15340
#15350

#1531

#1537

Important Installation Note: Supercharger systems without tuners are not eligible for supplemental warranty.
Supercharger systems sold without tuners are only emissions legal when used with the correct Edelbrock tune,
which can be downloaded at www.edelbrock.com.

FUEL PUMPS

#15353

NITROUS

#15343

ACCESSORIES

#1533

WATER PUMPS

CRATE ENGINES

Available Warranty: All E-Force Stage 1 systems supplied with a tuner, are eligible for our FREE 3 year/36,000 mile
Limited Powertrain warranty. Visit www.edelbrock.com/eforcewarranty or call 1-877-266-3838 for more information.

SPORTSWEAR

138

INDEX

E-Force superchargers are

manufactured in the USA
for unsurpassed quality
and performance

#15300

EFI

Stage 2 System #15352 on 93 Octane

Without
Tuner

SUPERCHARGERS

Stage 1 System #1532

Emissions With
Year Model
Engine
HP
Ft-lbs.
Code
Tuner
Stage 1 - Street Systems
Chrysler 300
l
2006-08
#1530
5.7L
466
456
Dodge Charger & Magnum
Chrysler 300
l
2009-10
#1532
5.7L
506
501
Dodge Charger & Challenger
Chrysler 300
l
2005-10
#1536
6.1L
556
501
Dodge Charger & Challenger
Chrysler 300
l
2011-14
#1534
5.7L
471RW
475
Dodge Charger & Challenger
Chrysler 300
l
2011-14
#1535
6.4L
551RW
526
Dodge Charger & Challenger
Stage 2 - Track Systems
Chrysler 300
2011-14
6.4L
643RW 574RW PENDING #15352
Dodge Charger & Challenger
Stage 3 - Pro-Tuner Systems
Chrysler 300
l
2006-08

5.7L

Dodge Charger & Magnum

Chrysler 300
l
2009-10

5.7L

Dodge Charger & Challenger

Chrysler 300
l
2005-10

6.1L
651RW+ 626RW+
Dodge Charger & Challenger
Chrysler 300
l
2011-14

5.7L

Dodge Charger & Challenger

Chrysler 300
l
2011-14

6.4L

Dodge Charger & Challenger

CALL FOR AVAILABILITY ON 2015 MODELS.

EMISSIONS GUIDE

l 50-STATE LEGAL l RACING ONLY l PRE-POLLUTION CONTROLLED VEHICLES l STOCK REPLACEMENT l ENGINE SWAP
PLEASE REFER TO PAGE 212 FOR MORE INFORMATION REGARDING THE EMISSIONS GUIDE.

CARBURETORS

DODGE TRUCK

CYLINDER HEADS GASKETS MANIFOLDS

SUPERCHARGERS

KITS POWER PACKAGES

CAMSHAFT & VALVETRAIN

E.O. Number D-215-89

Stage 1 System #1538

MORE POWER FOR YOUR DODGE TRUCK

EFI

SUPERCHARGERS

E-Force Supercharger systems are the most efficient designs on the market and will deliver an
impressive 421 rear wheel horsepower and 441 ft-lbs. of torque for the popular Dodge 5.7L HEMI engine.
This complete supercharger system provides maximum flow, minimum temperature rise, quiet operation
and reliability only the Edelbrock name can guarantee. It features minimum air restriction in and out of the
supercharger for optimal flow and performance. The individual 7 long intake runners allow for maximum
low end torque for towing and off-road applications while maintaining great daily driving manners.

CRATE ENGINES

Year Model
Engine
HP
Ft-lbs.
Stage 1 - Street Systems
2009-14* Dodge Ram Truck
5.7L HEMI 421RW 441RW
*CALL FOR AVAILABILITY ON 2014-2015 MODELS.

With
Tuner

Without
Tuner

#1538

#15380

WATER PUMPS

Important Installation Note: Supercharger systems without tuners are not eligible for supplemental warranty.
Supercharger systems sold without tuners are only emissions legal when used with the correct Edelbrock tune,
which can be downloaded www.edelbrock.com.
Available Warranty: All E-Force Stage 1 systems supplied with a tuner, are eligible for our FREE 3 year/36,000 mile
Limited Powertrain warranty. Visit www.edelbrock.com/eforcewarranty or call 1-877-266-3838 for more information.

Our test results with 5 psi of boost on a 2012 Ram truck

produced a gain of 100 hp and 100 ft-lbs. of torque.

INDEX

SPORTSWEAR

FUEL PUMPS

NITROUS

ACCESSORIES

Emissions
Code

139

WWW.EDELBROCK.COM

CARBURETORS

FORD TRUCK AND SUV SUPERCHARGERS

MANIFOLDS GASKETS CYLINDER HEADS

E.O. Number D-215-85

CAMSHAFT & VALVETRAIN

IMPRESSIVE RESULTS FOR YOUR TRUCK AND SUV

Ft-lbs.

Emissions
Code

With
Tuner

Without
Tuner

478

504

l
l

#1581
#1583

#15810
#15830

#1583

#15830

#1584

#15840

421RW 422RW

Available Warranty: All E-Force Stage 1 systems supplied with a tuner, are eligible for our FREE 3 year/36,000 mile
Limited Powertrain warranty. Visit www.edelbrock.com/eforcewarranty or call 1-877-266-3838 for more information.

ACCESSORIES

Stage 1 System #1583 for 2009-10 F-150

NITROUS

4-WHEEL DRIVE
HARDWARE KIT

140

INDEX

PLEASE REFER TO PAGE 212 FOR MORE INFORMATION REGARDING THE EMISSIONS GUIDE.

SPORTSWEAR

l 50-STATE LEGAL l RACING ONLY l PRE-POLLUTION CONTROLLED VEHICLES l STOCK REPLACEMENT l ENGINE SWAP

FUEL PUMPS

This accessory package relocates the oil filter

to clear the front differential when installing an
E-Force Supercharger system on 2004-14 4WD
F-150 trucks and 2007-13 SUVs.
Complete 4-Wheel Drive
Accessory Kit .................................................#15834

EMISSIONS GUIDE

WATER PUMPS

Important Installation Note: Supercharger systems without tuners are not eligible for supplemental warranty.
Supercharger systems sold without tuners are only emissions legal when used with the correct Edelbrock tune,
which can be downloaded www.edelbrock.com.

CRATE ENGINES

HP

EFI

Year Model
Engine
Stage 1 - Street Systems
2004-08 Ford F-150 2-Wheel Drive
5.4L 3V
2009-10 Ford F-150 2-Wheel Drive
5.4L 3V
Ford Expedition
2007-13
5.4L 3V
Lincoln Navigator
2011-14 Ford F-150
5.0L 4V
CALL FOR AVAILABILITY ON 2015 MODELS.

SUPERCHARGERS

Now you can bolt-on an Edelbrock E-Force Supercharger system and boost the power in your
Ford F-150, Expedition or Lincoln Navigator. These E-Force Supercharger systems are specially
designed for each application and will allow you to boost your performance up to an impressive
478 flywheel horsepower and 504 ft-lbs. of torque. These systems feature 14 long intake runners
for maximum low end torque making them ideal for towing and off-road performance applications.

POWER PACKAGES KITS

Stage 1 System #1581

CARBURETORS

MUSTANG

INDEX

SPORTSWEAR

FUEL PUMPS

NITROUS

ACCESSORIES

WATER PUMPS

CRATE ENGINES

EFI

SUPERCHARGERS

KITS POWER PACKAGES

CAMSHAFT & VALVETRAIN

CYLINDER HEADS GASKETS MANIFOLDS

SUPERCHARGERS

BOOST THE PERFORMANCE ON YOUR STOCK MUSTANG

These Edelbrock E-Force Supercharger systems will boost the performance of your Mustang to impressive levels without changing the daily
driving characteristics. These systems are exclusively designed to provide instant, reliable and safe horsepower for a stock Mustang with
low boost for minimum stress on the engine. They feature minimum air restriction in and out of the supercharger, along with individual long
intake runners for maximum low end torque for great off throttle performance. E-Force superchargers provide the most power at the lowest
amount of boost, resulting in performance that is safe to operate on a completely stock engine.
FEATURES

Supercharger Manifold Assembly (Featuring Eaton TVS Rotors)

85mm Electronic Throttle Body
Cast Aluminum Front Drive Bracket
Steel Belt Tensioner Brace
Heavy Duty Automatic Belt Tensioner
Cast Aluminum Water Crossover
Large 110 Sq-in Intercooler
Dual-Pass 3-Core (DP-3C) 160 Sq-in Intercooler
Dual Core Low Temp. Heat Exchanger for Intercooler System
Full Face, Low Temp. Heat Exchanger for Intercooler System
Goodyear Gatorback Serpentine Belt
Electric Intercooler Water Pump
Intercooler Recovery Tank
Custom Molded Intercooler Hoses
Fuel Injectors (41 lb/hr)
Fuel Injectors (50 lb/hr)
Fuel Injectors (60 lb/hr)
Supercharger Pulley 3.875"
Supercharger Pulley 3.75"
Supercharger Pulley 3.25"
HT0 Spark Plugs for 2005-early 2008 Models
Steel Idler Pulleys With Heavy Duty High Speed Bearings
High Flow Panel Air Filter for Stock Airbox
Extended Range, Drop-in Style, MAFS
Injection Molded, High Flow, Air Box Cover
Edelbrock Aluminum Engine Covers
Extruded Aluminum Fuel Rails
Handheld Calibration Module
Plug & Play, Electrical Harness & Installation Hardware
Cold Air Intake System

141

#1580

STAGE 1
#1582 #1586

#1588

STAGE 2
#15856 #15896

#1585

STAGE 3
#1587 #1589

#15863

WWW.EDELBROCK.COM

CARBURETORS

MUSTANG SUPERCHARGERS

Stage 1 System #1588

2015 MUSTANG SYSTEMS

FEATURING THE ALL-NEW DP-3C INTERCOOLER

With
Tuner

Without
Tuner

466
466
559

439
439
503

l
l
l
l

#1580
#1582
#1588
#1586

#15800
#15890
#15880
#15860

529
529
636
636

494
494
538
538

l
l
l
l

#15856

#15896

#15802

#15882

646+

646+

l
l
l
l

#1585
#1587
#1589
#15863

2009 MUSTANG HARDWARE KIT

This kit includes new intake gaskets and necessary hardware for installing E-Force Supercharger system
#1580 or #1585 on 2009 Mustang 4.6L engines.
Hardware Kit (for 2009 Ford Mustang GT) .....................................................................................................#15805

EMISSIONS GUIDE

PLEASE REFER TO PAGE 212 FOR MORE INFORMATION REGARDING THE EMISSIONS GUIDE.

142

INDEX

l 50-STATE LEGAL l RACING ONLY l PRE-POLLUTION CONTROLLED VEHICLES l STOCK REPLACEMENT l ENGINE SWAP

SPORTSWEAR

Hardware Kit #15805

Our Cooling System Upgrade kit is necessary when installing E-Force Supercharger system #1580 or #1585
in a 2005-06 Mustang GT. This kit relocates the thermostat from the cold side of the radiator to the hot side
for improved cooling. Kit contains all necessary hoses, clamps and hardware.
Cooling System Upgrade Kit (for 2005-06 Ford Mustang GT) ................................................................#15804

FUEL PUMPS

Cooling System
Upgrade Kit #15804

NITROUS

2005-06 MUSTANG COOLING SYSTEM UPGRADE KIT

ACCESSORIES

Important Installation Notes: 2005-06 installations require the use of Cooling Upgrade Kit #15804 (sold separately).
2009 installations will require Hardware Kit #15805 (sold separately). Supercharger systems sold without tuners are only
emissions legal when used with the correct Edelbrock tune, which can be downloaded www.edelbrock.com. Kit #15880
will fit BOSS Mustangs and will require custom tuning.
Warranty Information: All E-Force Stage 1 systems supplied with a tuner, are eligible for our FREE 3 year/36,000 mile
Limited Powertrain warranty. Visit www.edelbrock.com/eforcewarranty or call 1-877-266-3838 for more information.
Supercharger systems without tuners are not eligible for supplemental warranty.

WATER PUMPS

Emissions
Code

CRATE ENGINES

Ft-lbs.

EFI

Stage 2 System #15896

HP

SUPERCHARGERS

Stage 1 System #1588

Year Model
Engine
Stage 1 - Street Systems
2005-09 Ford Mustang
4.6L 3V
2010 Ford Mustang
4.6L 3V
2011-14 Ford Mustang
5.0L 4V
2015 Ford Mustang
5.0L 4V
Stage 2 - Track Systems
2005-09 Ford Mustang (complete)
4.6L 3V
2005-09 Ford Mustang (upgrade)
4.6L 3V
2011-14 Ford Mustang (complete)
5.0L 4V
2011-14 Ford Mustang (upgrade)
5.0L 4V
Stage 3 - Pro-Tuner Systems
2005-09 Ford Mustang
4.6L 3V
2010 Ford Mustang
4.6L 3V
2011-14 Ford Mustang
5.0L 4V
2015 Ford Mustang
5.0L 4V
CALL FOR AVAILABILITY ON 2015 MODELS.

POWER PACKAGES KITS

Stage 2 System #15896

Our new E-Force systems for the 2015 Mustang are the first to feature our new DP-3C
intercooler. DP-3C references the Dual-Pass Three Core design. With this new design,
the intake air charge passes through the intercooler twice; first pass is from the rotors up
through the center core and the second pass is when the air charge goes down into the
runners. The DP-3C intercooler also features 45% more of surface area over our previous
design, allowing this system to achieve lower intake air temps for improved power output.

CAMSHAFT & VALVETRAIN

2300cc/rev Twin Vortices

(TVS) Rotor Group

MANIFOLDS GASKETS CYLINDER HEADS

DP-3C high capacity air to water intercooler

system with 160 square inch intercooler and
dual core low temp radiator

CARBURETORS

CAMARO SS

SUPERCHARGERS

KITS POWER PACKAGES

CAMSHAFT & VALVETRAIN

CYLINDER HEADS GASKETS MANIFOLDS

SUPERCHARGERS

TAKE YOUR CAMARO TO THE NEXT LEVEL

426 horsepower not enough? Take an already high performance street car to the next level with an Edelbrock E-Force Supercharger! These supercharger
systems are exclusively tailored for the 2010-14 Camaro SS and feature 12 long intake runners that allow for maximum low end torque. Its compact design fits
under the stock hood and compliments the clean look of the engine compartment.
FEATURES

#1597

STAGE 1
#1562 #1598

3.875

3.875

#1563

#1596

STAGE 3
#1599 #15960 #15990

LS3/L99 Supercharger Manifold Assembly (Featuring Eaton TVS Rotors)

Cast Aluminum Tensioner/Idler Brackets
Cast Aluminum Engine Valley Tray
Heavy Duty Automatic Belt Tensioner
Dual, High Capacity, Bar & Plate, Intercoolers
Full Face, Low Temp. Heat Exchanger for Intercooler System
Extruded Aluminum Fuel Rails with -6 AN lines
Custom Molded Intercooler Hoses with Quick Connect Fittings
Goodyear Gatorback Serpentine Belt
Intercooler Recovery Tank
Fuel Injectors (52 lb/hr)
Steel Idler Pulleys With Heavy Duty High Speed Bearings
High Flow Panel Air Filter for Stock Airbox
Injection Molded, High Flow, Air Box Cover
Edelbrock Aluminum Engine Covers
Handheld Calibration Module, Preloaded With All Tunes
Plug & Play, Electrical Harness & Installation Hardware
Supercharger Pulley

3.5

The Edelbrock R & D team continues to test the LS-based supercharger system #1598 in our 2010 Camaro.
We added some Edelbrock components and ran our chassis dyno test at 6 psi of boost on 91 octane with
the 3-1/2" supercharger pulley. Testing results for the 2010-2014 Camaro produced 618 hp and 534 ft-lbs to
the rear wheels! Net increase of 103 hp over our Stage 1 system. For competition racing use only.
SPECIFICATIONS
Horsepower: 618 hp (rear wheel)
Torque: 534 ft-lbs. (rear wheel)

NITROUS
FUEL PUMPS
SPORTSWEAR
INDEX

3.5

TUNER PERFORMANCE RECIPE

ACCESSORIES

WATER PUMPS

CRATE ENGINES

EFI

Electric Intercooler Water Pump

Block:

E-Force Stage 2 vs. Stage 1 Camaro

Supercharger Dyno Results

143

Cylinder Heads:
Valve Springs:
Air Intake:
Pulley:
Fuel Injectors:
Fuel Pump:

Stock GM LS3
Stock GM LS3
Edelbrock #5768
Edelbrock #15988
Edelbrock 3.5"
Edelbrock #15903
ZL1

PSI:
Header Type:
Camshaft:

6
Long Tube

Edelbrock Rollin' Thunder

Hydraulic Roller #2219

CAMSHAFT SPECIFICATIONS
230
Intake Duration:
243
Exhaust Duration:
.631"
Intake Valve Lift:
.631"
Exhaust Valve Lift:
114
Lobe Separation:

WWW.EDELBROCK.COM

CARBURETORS

CAMARO SS SUPERCHARGERS

E.O. Number D-215-89

Stage 3 System #1599

#1597
#1598
#1562
#1563

#15970
#15980
#15620
#15630

#15960
#15990
#1596
#1599

Stage 1 System #1598

CAMARO TOP AND COIL COVER DESIGN

AUTOMATIC CONVERSION KIT

VALLEY PLATE

This Convertible Brace is required when installing an E-Force supercharger system into a
2011-14 Camaro SS. Kit includes brace and all hardware necessary for installation.
Convertible Brace (For use with E-Force systems #1596, #1597, #1598, #1599, #15996, #15997)........#15956

144

INDEX

CONVERTIBLE BRACE

SPORTSWEAR

Convertible Brace #15956

This kit contains the valley plate needed to install an LS3 supercharger kit on an engine equipped
with Active Fuel Management lifters.
LS3 Supercharger valley plate...................................................................................................................#15911

FUEL PUMPS

Automatic Conversion Kit #15908

NITROUS

Ideal for shops and jobbers that dont want to stock both automatic and manual Camaro supercharger
systems, this kit includes the valley plate and larger supercharger pulley needed to convert manual
system #1598 to automatic kit #1597. NOTE: When using this kit the optional warranty will not be
available, due to the necessity of having to remove the tamper-proof seal to change the pulley.
Automatic Conversion Kit (For use with E-Force system #1598)..........................................................#15908

ACCESSORIES

Camaro Manifold Top and Coil Cover #41144

WATER PUMPS

These covers are made of cast aluminum and feature a vented coil cover design along with a two-tone
black and red powder coated finish with inset "Supercharged" badges. This design retains the same
bolt pattern and is compatible with all of the previous E-Force Camaro based systems. For use with
2010-13 Camaro models only, will not fit 2014-15 models, due to interference with the hood vent.
Installation requires removal of supercharger.
E-Force Camaro Manifold Top and Coil Covers......................................................................................#41144
E-Force Camaro Coil Covers Only..............................................................................................................#41142

CRATE ENGINES

Available Warranty: All E-Force Stage 1 systems supplied with a tuner, areeligible for our FREE 3 year/36,000 mile
Limited Powertrain warranty. Visit www.edelbrock.com/eforcewarranty or call 1-877-266-3838 for more information.

EFI

Important Installation Note: Supercharger systems sold without tuners are only emissions legal when used with the
correct Edelbrock tune, which can be downloaded www.edelbrock.com. Convertible installations will require the use of
Edelbrock Convertible Brace #15956 (sold separately). E-Force systems #1562/#1563/#15620/#15630/#1596/#1599 feature a low
profile top for use with 2014-15 models to accommodate the vent on the factory hood.

SUPERCHARGERS

Without
Tuner

POWER PACKAGES KITS

With
Tuner

CAMSHAFT & VALVETRAIN

Stage 3 System #1599

Engine
Emissions
Year Model
Trans Type HP
Ft-lbs.
Code
Stage 1 - Street Systems
l
2010-13 Camaro SS
Auto
421RW 439RW
l
2010-13 Camaro SS
Manual
599
547
l
2010-15 Camaro SS w/Low Profile Top
Auto
421RW 439RW
l
2010 -15 Camaro SS w/Low Profile Top
Manual
599
547
Stage 3 - Pro-Tuner Systems
l
2010-13 Camaro SS

Auto
l
2010-13 Camaro SS

Manual
l
2010-15 Camaro SS w/Low Profile Top

Auto
l
2010-15 Camaro SS w/Low Profile Top Manual

MANIFOLDS GASKETS CYLINDER HEADS

Stage 1 System #1597

EMISSIONS GUIDE

l 50-STATE LEGAL l RACING ONLY l PRE-POLLUTION CONTROLLED VEHICLES l STOCK REPLACEMENT l ENGINE SWAP
PLEASE REFER TO PAGE 212 FOR MORE INFORMATION REGARDING THE EMISSIONS GUIDE.

CARBURETORS

CORVETTE

INDEX

SPORTSWEAR

FUEL PUMPS

NITROUS

ACCESSORIES

WATER PUMPS

CRATE ENGINES

EFI

SUPERCHARGERS

KITS POWER PACKAGES

CAMSHAFT & VALVETRAIN

CYLINDER HEADS GASKETS MANIFOLDS

SUPERCHARGERS

DESIGNED TO BOOST YOUR CORVETTE TO NEW PERFORMANCE LEVELS

Our E-Force systems will take your Corvette to the next performance level. Each system utilizes a unique intake manifold housing design that is tailored towards
each platform. Plus, this kit fits under the stock hood with no modifications without sacrificing runner length or intercooler area. Our C6 Z06 systems are specially
designed for a seamless integration with the dry sump system, plus it fits under the stock hood with no modifications!
Our new E-Force for the C7 Z06 is designed exclusively for the LT4 engine. The system includes a new intake manifold with Eaton 2300 TVS rotor assembly,
making it an easy direct plug and play installation. The Stage 1 system utilizes the OEM belt offset and includes the intake manifold and tune for an easy swap.
The Stage 2 system includes an intake manifold, pulley, belt and tune for the next step up for your Z06.
FEATURES

STAGE 1
STAGE 2
STAGE 3
#1590 #1572 #1593 #1574 #1571 #1570 #15731 #1591 #1594 #1575 #15701 #15711 #15732 #1573 #1576 #1592 #1595 #15702 #15712

Supercharger Manifold Assembly

4
4
4
4
4
(Featuring Eaton TVS Rotors)
Cast Aluminum Tensioner/Idler
4
4
4
4
4
Brackets
4
4
Cast Aluminum Engine Valley Tray
Cast Aluminum Engine Valley Tray,
4
4
Dry Sump
4
4
4
4
4
Heavy Duty Automatic Belt Tensioner
Dual, High Capacity, Bar & Plate,
4
4
4
4
4
Intercoolers
Low Temp. Heat Exchanger for
4
4
4
4
4
Intercooler System
Extruded Aluminum Fuel Rails with
4
4
4
4
-6 AN lines
4
4
4
4
Goodyear Gatorback Serpentine Belt 4
Secondary 10-rib Supercharger Belt
7.50"
Drive with Crank Pulley (Size shown)
4
4
4
4
4
Electric Intercooler Water Pump
4
4
4
4
4
Intercooler Recovery Tank
4
4
4
4
4
Custom Molded Intercooler Hoses
52 lb/hr 60 lb/hr 52 lb/hr 52 lb/hr
Fuel Injectors (52 lb/hr)
3.875" 3.25" 3.875" 3.875" 3.50"
Supercharger Pulley (Size shown)
Steel Idler Pulleys With Heavy Duty
4
4
4
4
4
High Speed Bearings
4
4
4
4
4
High Flow Air Intake Tube & Filter
4
High Flow Mass Air Flow Sensor
4
4
ZR1 Style, Liquid to Liquid Oil Cooler
4
4
4
4
4
Edelbrock Aluminum Engine Covers
Handheld Calibration Module,
4
4
4
4
4
Preloaded With All Tunes
Plug & Play, Electrical Harness &
4
4
4
4
4
Installation Hardware
High Volume, In Tank, Fuel Pump

145

4
4
4

7.50"

7.50"

8.70"

4
4
4

4
4
4

52 lb/hr 52 lb/hr 52 lb/hr

3.50" 3.50" 3.50" 3.25"

3.25"

2.75"

4
4
4

4
4
4

4
4
4

7.50"

4
4
4
3.50"

2.75"

4
4

4
4

4
7.50"

7.50"

4
4
4

4
4
4

4
4
4

4
4
4

4
4
4

4
4
4

WWW.EDELBROCK.COM

CARBURETORS

CORVETTE SUPERCHARGERS

MANIFOLDS GASKETS CYLINDER HEADS

Stage 1 System #1570

E.O. Number D-215-89

Stage 2 System #1594

Emissions
Code

With
Tuner

Without
Tuner

LS2
LS3
LS3
LS7
LT4
LT1
LT1

554
554
554
657
CALL
624
624

515
515
515
582
CALL
600
600

l
l
l
l
l
l
l

#1593
#1590
#1574
#1572
#15731
#1571
#1570

#15930
#15900
#15740
#15720
#157310
#15710
#15700

l
l
l
l
l
l

#1594 #15940
#1591 #15910
#1575 #15750
#15701

#15711

#15732 #157320

LS2
LS3
LS3
LT1
LT1
LT4

599
547

537RW 527RW
537RW 527RW
CALL
CALL

LS2
LS3
LS3
LS7
LT1
LT1

862+

790+

l
l
l
l
l
l

#1595
#1592
#1576
#1573
#15712
#15702

EMISSIONS GUIDE

PLEASE REFER TO PAGE 212 FOR MORE INFORMATION REGARDING THE EMISSIONS GUIDE.

146

INDEX

l 50-STATE LEGAL l RACING ONLY l PRE-POLLUTION CONTROLLED VEHICLES l STOCK REPLACEMENT l ENGINE SWAP

SPORTSWEAR

This kit contains everything needed to upgrade Corvette supercharger systems #1574, #1590 and #1593
from 554 HP to 599 HP. Includes fuel pump module and 3.5" pulley. (No tuning necessary) NOTE: When
using this kit the optional warranty will not be available, due to the necessity of having to remove the
tamper-proof seal to change the pulley.
E-Force Corvette Supercharger 599 HP Upgrade Kit (LS2/LS3)............................................................#15902

FUEL PUMPS

E-FORCE 2005-13 CORVETTE STAGE 2 UPGRADE KIT

NITROUS

This 15% overdrive crank pulley is for use with a 2014-15 Corvette Stingray with an E-Force Supercharger
system installed. It features an 8.7" diameter 10-rib secondary and stock diameter primary drive that delivers
maximum traction and stability in supercharged applications. Its an ideal solution when a smaller pulley
is not an option. Included with #15732. This crank pulley is for use with Edelbrock C7 Corvette E-Force
Supercharger systems only.
Emissions Code
Overdrive Crank Pulley for C7 Corvette E-Force Supercharger Systems (8.7").............. l...................#15815

ACCESSORIES

OVERDRIVE CRANK PULLEY FOR 2014-15 CORVETTE'S

WATER PUMPS

Important Installation Notes: System #1590 and #1591 can be installed on dry sump equipped Grand Sport models.
This installation will require the use of Edelbrock Dry Sump Accessory Kit #15905 (sold separately). System #1574,
#1575 and #1576 are for use on 2010-13 Corvette Grand Sport models equipped with a dry sump oil system. System
#1591 can not be installed on Z06 or ZR1 models. Supercharger systems without tuners are not eligible for our Limited
Powertrain Warranty. Supercharger systems sold without tuners are only emissions legal when used with the
correct Edelbrock tune, which can be downloaded www.edelbrock.com.
Available Warranty: All E-Force Stage 1 systems supplied with a tuner, areeligible for our FREE 3 year/36,000 mile
Limited Powertrain warranty. Visit www.edelbrock.com/eforcewarranty or call 1-877-266-3838 for more information.

CRATE ENGINES

E-Force 2005-13
Corvette Stage 2
Upgrade Kit #15902

Ft-lbs.

EFI

Overdrive Crank
Pulley #15815

HP

SUPERCHARGERS

Stage 3 Systems #15702 & #15712

Engine

POWER PACKAGES KITS

Stage 1 Systems #1572

Year Model
Stage 1 - Street Systems
2005-07 Corvette
2008-13 Corvette
2010-13 Grand Sport w/Dry Sump
2006-13 Corvette ZO6
2015-16 Corvette ZO6
2014-16 Stingray
2014-16 Stingray Z51
Stage 2 - Track Systems
2005-07 Corvette
2008-13 Corvette
2010-13 Grand Sport w/Dry Sump
2014-16 Stingray Z51
2014-16 Stingray
2015-16 Corvette ZO6
Stage 3 - Pro-Tuner Systems
2005-07 Corvette
2008-13 Corvette
2010-13 Grand Sport w/Dry Sump
2006-13 Corvette ZO6
2014-16 Stingray
2014-16 Stingray Z51

CAMSHAFT & VALVETRAIN

Stage 3 System #1592

CARBURETORS
CYLINDER HEADS GASKETS MANIFOLDS

SUPERCHARGERS

CAMSHAFT & VALVETRAIN

E.O. Number D-215-89

Stage 1 System #1567

Now you can bolt-on an Edelbrock E-Force Supercharger system and boost the power in your GM truck
or SUV. These E-Force Supercharger systems are specially designed for each application and will allow
you to boost your towing performance to impressive levels. These systems feature a unique intake runner
design for maximum low end torque making them ideal for towing and off-road performance applications.

KITS POWER PACKAGES

E-Force Systems #1568

Year Model
Stage 1 - Street Systems
2003-06 GM 1500 Gen III LS
2007

SUPERCHARGERS
EFI
CRATE ENGINES
WATER PUMPS
ACCESSORIES
NITROUS
FUEL PUMPS
SPORTSWEAR
INDEX

GM TRUCKS AND SUV'S

Silverado and
Sierra Classic Gen III LS

2007-13 GM 1500 Silverado and Sierra

E-Force Supercharger Systems #1569

E-Force superchargers are
manufactured in the USA
for unsurpassed quality
and performance
Available Warranty: All E-Force Stage 1 systems supplied
with a tuner, are eligible for our FREE 3 year/36,000 mile
Limited Powertrain warranty. Visit www.edelbrock.com/
eforcewarranty or call 1-877-266-3838 for more information.

2007-13
2007-13
2007-13
2007-10
2011-13
2014-16
2015-16
2014-16
2015-16

GM 1500 Silverado and Sierra

GM SUVs Gen IV LS
GM SUVs Gen IV LS
GM HD Silverado & Sierra
GM HD Silverado & Sierra
GM 1500 Silverado and Sierra
Sports Utility Vehicle* EcoTec
GM 1500 Silverado and Sierra
Sports Utility Vehicle* EcoTec

Engine

HP

Ft-lbs.

4.8L
5.3L
6.0L
4.8L
5.3L
6.0L
4.8L
5.3L
6.2L
5.3L
6.2L
6.0L
6.0L
5.3L
5.3L
6.2L
6.2L

339
345
348
339
345
348
334
364
407
384

424
399
445
445
528
528

359
381
381
359
381
381
380
397
434
390

431
395
421
421
496
496

Emissions
Code

With
Tuner

Without
Tuner

#1577

#15770

#1577

#1577

#1578

#15780

l
l
l
l
l
l
l
l
l

#1579
#1564
#1567
#1560
#1561
#1565
#1565
#1566
#1566

#15790
#15640
#15670
#15600
#15610
#15650
#15650
#15660
#15660

Important Installation Notes: Systems #1560, #15600, #1561, #15610, #1577, #15770, #1578, #15780, #1579, #15790 require
an Edelbrock Supplemental Fuel Pump Kit (sold separately, see below). Failure to use a Supplemental Fuel Kit may result
in engine damage and will void your warranty. #15790 will also fit 2007-08 1500 series trucks with a 6.0L engine (requires
custom tune). Supercharger systems sold without tuners are only emissions legal when used with the correct Edelbrock
tune, which can be downloaded www.edelbrock.com.

SUPPLEMENTAL FUEL PUMP KITS

REQUIRED FOR 2003-09 NON-FLEX FUEL GM TRUCKS & SUVS

These Supplemental Fuel Pump Kits are required for 2009 and earlier GM trucks and SUVs utilizing #1560, #15600, #1561, #15610, #1577, #15770, #1578, #15780, #1579
and #15790 E-Force supercharger systems. Failure to use one of these kits may result in engine damage and void your E-Force Superchargers warranty. These kits
are not required for Flex Fuel models. Flex Fuel models come standard with adequate fuel systems that properly operate with the E-Force Supercharger system.
These kits include a replacement fuel pump, control module and fuel level sender (system #15791 also includes injectors).
Year
2003-07
2003-07
2007-09
2007-09
2007-09
2007-09
2007-09
2007-09
2007-09

Model
GM Trucks with Return Fuel System
GM Trucks with Returnless Fuel System
GM Crew & Extended Cab Truck (Except Long Bed)
GM Standard Cab & All Long Bed Trucks
GM Crew & Extended Cab Truck
GM SUV with Short Wheel Base
GM SUV with Long Wheel Base
GM SUV with Short Wheel Base
GM SUV with Long Wheel Base

147

Engine
6.2L
6.2L
4.8L & 5.3L
4.8L & 5.3L
6.0L & 6.2L
5.3L
5.3L
6.2L
6.2L

Part #
#15773
#15775
#15781
#15782
#15791
#15642
#15643
#15671
#15672

Supplemental Fuel
Pump Kit #15782

WWW.EDELBROCK.COM

CARBURETORS

JEEP

SUPERCHARGERS

MANIFOLDS GASKETS CYLINDER HEADS

E.O. Number D-215-91

CAMSHAFT & VALVETRAIN

2012-14 JEEP WRANGLER

HP

Ft-lbs.

Emissions
Code

With
Tuner

Without
Tuner

303

262

#1527

#15270

EMISSIONS GUIDE

PLEASE REFER TO PAGE 212 FOR MORE INFORMATION REGARDING THE EMISSIONS GUIDE.

148

INDEX

l 50-STATE LEGAL l RACING ONLY l PRE-POLLUTION CONTROLLED VEHICLES l STOCK REPLACEMENT l ENGINE SWAP

SPORTSWEAR

Our supercharger assembly features a unique design

that allows access to OEM oil filter for no hassle
filter changes and a simplified installation.

E-Force superchargers are

manufactured in the USA
for unsurpassed quality
and performance

FUEL PUMPS

Available Warranty: All E-Force Stage 1 systems with tuner areeligiblefor our FREE Limited Powertrain
3 year/36,000 mile warranty. Visit www.edelbrock.com/eforcewarranty or call 1-877-266-3838 for more information.

NITROUS

Important Installation Note: Supercharger systems sold without tuners are only emissions legal when used with the
correct Edelbrock tune, which can be downloaded at www.edelbrock.com.

ACCESSORIES

Year Model
Engine
Stage 1 - Street Systems
2012-14 Jeep Wrangler
3.6L
CALL FOR AVAILABILITY ON 2015 MODELS.

WATER PUMPS

Stage 1 System #1527

Self contained oil system with 100,000

mile service interval - no drilling or
plumbing required
Electronic PCM programming module,
with application specific tuning
Integrated bypass valve for minimal
decrease in fuel economy
Designed, cast and manufactured in
the USA by Edelbrock

CRATE ENGINES

Exclusive Edelbrock compact design

fits under the stock hood
Bolt-on installation - everything fits
right out of the box
Features Eaton Gen VI 1320 TVS rotor
assembly; the same high-quality rotors
used by many OEM manufacturers
50-state emissions pending

EFI

UNIQUE E-FORCE FEATURES:

SUPERCHARGERS

Now you can get the popular E-Force Supercharger for your Pentastar equipped JK! This E-Force
Supercharger system is designed exclusively for the Pentastar 3.6L V6 engine. It is designed to increase
torque for improved towing and off-road performance when you need it the most, while retaining great
daily driving manners. It has been designed from the ground-up and utilizes the Eaton 1320 TVS rotor
assembly for maximum efficiency in a compact package. The manifold assembly also features a dual pass
intercooler for reduced air temperature.
The Edelbrock E-Force Supercharger system is not just a performance upgrade, it also features great
looks! The supercharger assembly is black powder coated for durability with machined highlights for
a unique appearance that will give your engine compartment a distinct look.

POWER PACKAGES KITS

Stage 1 System #1527

CARBURETORS

FR-S, BRZ & GT86

CYLINDER HEADS GASKETS MANIFOLDS

SUPERCHARGERS

CAMSHAFT & VALVETRAIN

E.O. Number Pending

KITS POWER PACKAGES

Stage 1 System #1556

2012-15 SCION FR-S / SUBARU BRZ / TOYOTA GT86

In dyno tests, E-Force system #1556 increased

performance by 77 hp and 57 ft-lbs. to the rear wheels!

NITROUS

ACCESSORIES

WATER PUMPS

CRATE ENGINES

EFI

SUPERCHARGERS

Now you can get the popular E-Force Supercharger for your 2.0L equipped FR-S, BRZ, or GT86. This
all-new E-Force Supercharger system is designed exclusively for the FA20/4U-GSE engine. Its unique
inverted design allows for maximum flow at high rpm, while retaining great daily driving characteristics.
It has been designed from the ground-up and utilizes the Eaton 1320 TVS rotor assembly for maximum
efficiency in a compact package. As with all E-Force superchargers, this system features an efficient high
flow inlet configuration that results in a shorter, less restrictive intake path for improved air flow and
performance. To cool the incoming air, is a large dual pass air-to-water intercooler and heat exchanger.
All of these features help the E-Force deliver dramatically improved performance, especially in the midrange, where power dips have been eliminated for a smooth linear power curve. Lastly, the supercharger
assembly is finished with a durable black powder coating with red accents for a unique look that will let
everybody know your car is E-Force powered!

Year Model
Engine HP Ft-lbs.
Stage 1 - Street Systems
2012-15 Scion FR-S / Subaru BRZ / Toyota GT86 2.0L 242RW 186RW

FUEL PUMPS
SPORTSWEAR
INDEX

UNIQUE E-FORCE FEATURES

High Flow intake box and filter that allows for 2x more air flow
Compact design fits under the stock hood
Supplied with preformed hoses for ease of installation - no trimming needed
Bolt-on installation - everything fits right out of the box
with no cutting or welding needed
Features Eaton Gen VI 1320 TVS rotor assembly; the same
high-quality rotors used by many OEM manufacturers
Self contained oil system with 100,000 mile service interval
(no drilling or plumbing required)
Includes an EcuTek ProECU Programming Kit with E-Force tune
Integrated bypass valve for minimal decrease in fuel economy
50-state emissions pending
Emissions With Without
Code
Tuner Tuner
l

#1556 #15560

Important Installation Note: Supercharger systems sold without tuners are only emissions legal when used with the
correct Edelbrock tune, which can be downloaded at www.edelbrock.com.
E-Force superchargers are
manufactured in the USA
for unsurpassed quality
and performance

149

Available Warranty: All E-Force Stage 1 systems supplied with a tuner, are eligible for our FREE 3 year/36,000 mile
Limited Powertrain warranty. Visit www.edelbrock.com/eforcewarranty or call 1-877-266-3838 for more information.

FOR UP-TO-DATE INFO AND VIDEOS

VISIT WWW.EDELBROCK.COM/FA20
WWW.EDELBROCK.COM

CARBURETORS

ENFORCER S/B CHEVY SUPERCHARGERS

MANIFOLDS GASKETS CYLINDER HEADS

E-FORCE ENFORCER SYSTEMS FOR S/B CHEVY

EFI SYSTEMS

E-Force RPM Complete Supercharger System

E-Force RPM Base Supercharger System

without throttle bodies, electronics, harness & injectors

Conventional

#1520

#15201 #15203

E-Tec, Vortec

#1523

#15231 #15233

E-Tec, Vortec

#1522

#15221 #15223

CRATE ENGINES

without throttle bodies, electronics, harness & injectors

S/B Chevy
Emissions
Cylinder Head Type Code
Satin Polished Black
l
#1521 #15211 #15213
Conventional

EFI

TAKE YOUR STREET ROD OR

MUSCLE CAR TO THE NEXT LEVEL!

Description
E-Force RPM Complete Supercharger System
E-Force RPM Base Supercharger System

Important Installation Notes: Carb pad height: 11.73 (measured from the end seal surface), throttle body height: 2.66.

These systems feature a carburetor pad with dual 4150-style flange configuration. These systems are
available with or without dual, 600 cfm Performer Series carburetors. The systems with carbs are
specifically tuned and ready to run right out of the box.

BOOST INFO

Intake Duration: 264

Exhaust Duration: 276
Intake Valve Lift: 630
Exhaust Valve Lift: 630
Lobe Separation: 112

#15131 #15133

Conventional

#1514

#15141 #15143

E-Tec, Vortec

#1515

#15151 #15153

E-Tec, Vortec

#1516

#15161 #15163

Important Installation Notes: Carb pad height: 11.73 (measured from the end seal surface), carb height: 3.25.

E-FORCE EFI KITS

This kit includes the core components needed for completing an Enforcer electronic fuel injected installation
on a small-block Chevy engine. It includes two throttle bodies, Pro-Flo 2 ECU, wiring harness, fuel rails,
injectors, gaskets and hardware. Available in satin aluminum, polished or black powder coated finish.
Emissions Code
Satin Polished Black
E-Force EFI Kit (Throttle body height: 2.66") ........................................l................ #35800..... #35801........#35803

EMISSIONS GUIDE

PLEASE REFER TO PAGE 212 FOR MORE INFORMATION REGARDING THE EMISSIONS GUIDE.

150

INDEX

l 50-STATE LEGAL l RACING ONLY l PRE-POLLUTION CONTROLLED VEHICLES l STOCK REPLACEMENT l ENGINE SWAP

SPORTSWEAR

12-14 psi boost

2.75 SC Pulley
110 octane gasoline

CAM SPECS

#1513

FUEL PUMPS

350 Cubic Inch

9.5:1 Compression Ratio
Victor Jr. Heads #77629
Forged Rotating Assembly

NITROUS

ENGINE SPECS

Conventional

ACCESSORIES

Our standalone system #1520 on a professionally built

engine produced 753 HP and 636 ft-lbs. of torque

S/B Chevy
Emissions
Satin Polished Black
Cylinder Head Type Code

WATER PUMPS

CARBURETOR SYSTEMS

Description
E-Force RPM Supercharger System
without carburetors
E-Force RPM Supercharger System
with dual 600 cfm Performer carbs
E-Force RPM Supercharger System
without carburetors
E-Force RPM Supercharger System
with dual 600 cfm Performer carbs

SUPERCHARGERS

E-Force superchargers are

manufactured in the USA
for unsurpassed quality
and performance

These systems are setup for electronic fuel injected applications and feature a throttle body flange that
will accept dual throttle bodies with 4150-style bolt pattern. These E-Force Supercharger systems also
include a high capacity air to water intercooler with a bar and plate design and will require a low temp
radiator (sold separately, see page 153) to cool the incoming intake charge. Complete kit includes throttle
bodies, Pro-Flo 2 ECU, wiring harness, fuel rails, injectors, gaskets and hardware.

POWER PACKAGES KITS

These E-Force Supercharger systems for small-block Chevy are a traditional positive displacement
supercharger that is ideal for use in street rod and muscle car applications. They include a newly designed
intake assembly with Eaton Gen VI 2300 TVS internals, manifold, drive pulleys, 10-rib serpentine belt,
and all the necessary hardware. Complete systems are pre-assembled for an easy bolt-on installation.
E-Force supercharger systems are available with or without dual-carburetors and dual EFI throttle bodies.
These systems are designed to be installed on a factory style front end drive. Will not work directly with
aftermarket serpentine systems. Systems are available in natural satin aluminum, black powder coated or
polished finish for a show quality classic look. Compatible with 6-7/16" center-to-center air cleaners.

CAMSHAFT & VALVETRAIN

E-Force
System #15141

CARBURETORS

ENFORCER CHEVY LS

SUPERCHARGERS & ACCESSORIES

CYLINDER HEADS GASKETS MANIFOLDS

E-FORCE ENFORCER SYSTEMS FOR LS ENGINES

CAMSHAFT & VALVETRAIN

These NEW E-Force Enforcer Supercharger systems are designed for Chevy LS engines with rectangular
port cylinder heads. Its a traditional positive displacement supercharger that is ideal for street rods and
muscle cars with an LS transplant.
These E-Force systems are setup with a dual 4150-style flange and are compatible with both dual
carburetors or electronic fuel injected throttle body applications (coming soon). They are designed to
be installed on a factory style front end drive and pulley system. Will not work directly with aftermarket
serpentine systems. Compatible with Edelbrock dual carburetor air cleaners. They include a newly
designed assembly with Eaton Gen VI 2300 TVS internals, manifold, drive pulleys, 10-rib serpentine belt
and all the necessary hardware. Available in a natural satin aluminum, high quality polished and black
powder coated finish.
Each system includes the supercharger housing with rotors and drive pulley installed,
and intake manifold with intermediary adapter plate.
Systems come with Corvette belt offset setup and Corvette crankshaft drive pulley adapter.
Induction Application Type
Carbureted
Carbureted

Cylinder Head Type

Cathedral Port
Rectangular Port

Emissions
Code
l
l

Satin
#1512
#1511

Polished
#15121
#15111

Black
#15123
#15113

SUPERCHARGERS

KITS POWER PACKAGES

Important Installation Notes: Carb pad height: 12.10" (measured from the end seal flange).

E-Force Enforcer #15251 powered the 1972 Edelbrock station wagon for the 2014 Hot Rod Power Tour

CRANKSHAFT DRIVE PULLEY ADAPTER

Crankshaft Drive
Pulley Adapter #15818

These crankshaft drive pulleys are intended for use with the above E-Force systems when installing on a
engine utilizing a GM Gen V Camaro or truck front end drive setup.
Crankshaft Drive Pulley Adapter with Truck/Gen V Camaro Belt Offset ..........................................#15818

ACCESSORIES

WATER PUMPS

CRATE ENGINES

EFI

E-Force system #1511 on a stock LS3 engine

E-FORCE PERFORMER SERIES CARBURETORS

INDEX

SPORTSWEAR

FUEL PUMPS

NITROUS

Tensioner Cover
#15553

These Performer Series carburetors are optimized to work with our street rod and muscle car E-Force
systems. Available in satin aluminum, EnduraShine or black powder coated finish.
Emissions Code
Satin
EnduraShine
Black
E-Force Performer 600 cfm Series (front) ................ l ................. #14055 ..................#140545 ................#140535
E-Force Performer 600 cfm Series (rear) ................. l ................. #14056 ..................#140546 ................#140536

BILLET BELT TENSIONER COVERS

Tensioner Cover
#15551

151

These billet belt tensioner covers are the perfect way to complete the look of the Enforcer supercharger.
They are included with all Enforcer crate engines. Available in a high quality mirror polish or black hard
anodized finish.
Polished
Black
Tensioner Cover For Enforcer Supercharger Systems ............................................#15551 .................#15553

REGISTERED TRADEMARK OF THE EATON CORPORATION

WWW.EDELBROCK.COM

CARBURETORS

UNIVERSAL LS AND E-ROD SUPERCHARGERS

MANIFOLDS GASKETS CYLINDER HEADS

Edelbrock installed a Universal E-Force Supercharger

System #1540 in Car Craft's 1965 El Camino test vehicle.
600
550

Torque

HP / Torque

450

UNIVERSAL SYSTEMS FOR

GM LS GEN III & IV ENGINE SWAPS

Horsepower

400
350
300

200
2500 3000 3500 4000 4500 5000 5500 6000 6500
RPM

Universal System #1540

Block

550

Torque

HP / Torque

450

Horsepower

400
350

250

547 ft-lbs

UNIVERSAL E-FORCE SYSTEMS FOR USE

WITH GM E-ROD ENGINES

Edelbrock has designed these Universal E-Force supercharger systems for use with GM Performances
LC9 (#19258004) and LS3 (#19244805) E-Rod emissions-legal Gen IV small-block crate engines. These
systems include all of the necessary components to increase the performance of these engines, while
maintaining the E-Rod emissions-legal status. These systems are ideal for use 1995 and earlier vehicles
and kit cars that require emissions testing.
The supercharger housing features 12 long runners for maximum low end torque and great drivability.
System #15426 will produce 599+ flywheel horsepower and 547+ ft-lbs. of torque. Edelbrock E-Force
systems are designed to provide instant and reliable horsepower with low boost for minimum stress on
the engine. Its compact design fits under the stock hood on most applications and complements the
clean look of any engine compartment. These systems require the use of a universal heat exchanger
(sold separately). Each system includes a handheld module for uploading the emissions-legal tune to
the GM Parts Engine Control System.

Universal E-Force System #15426

Belt Offset Type

Truck (88mm Throttle Body)
Corvette

Emissions
Code
l
l

With
Tuner
#15416
#15426

Important Installation Notes: These systems will require a fuel system with a consistent fuel flow of 60 psi to prevent
engine damage.

EMISSIONS GUIDE

PLEASE REFER TO PAGE 212 FOR MORE INFORMATION REGARDING THE EMISSIONS GUIDE.

152

INDEX

l 50-STATE LEGAL l RACING ONLY l PRE-POLLUTION CONTROLLED VEHICLES l STOCK REPLACEMENT l ENGINE SWAP

SPORTSWEAR

E.O. Number D-215-89

Engine
GM E-Rod LC9 5.3L
GM E-Rod LS3 6.2L

FUEL PUMPS

200
2500 3000 3500 4000 4500 5000 5500 6000 6500
RPM

#15470
#15440
#15480
#15420
#15410
#15400
#15430
#15490

NITROUS

300

#1540

ACCESSORIES

500

#15450
#15460
#15461

WATER PUMPS

600

CRATE ENGINES

Edelbrock installed a Universal E-Force Supercharger

System #1540 in Year Ones 1969 Camaro.

Without
Tuner

EFI

Gen IV
Gen IV
Gen IV
Gen IV
Gen IV
Gen IV
Gen IV
Gen IV

With
Tuner

SUPERCHARGERS

Gen III
Gen III
Gen III

Emissions
Cylinder Head
Belt Offset
Code
Universal Systems for GM Gen III Engine Swap
l
LS Cathedral Port
Camaro/GTO (Gen IV 1998-02)
l
LS Cathedral Port
Corvette
l
LS Cathedral Port
Truck
Universal Systems for GM Gen IV Engine Swaps
l
LS2 Cathedral Port
Camaro/GTO (Gen IV 1998-02)
l
LS2 Cathedral Port
Corvette
l
LS2 Cathedral Port
Truck (88mm Throttle Body)
l
LS3/L92 Rectangular Port Camaro/GTO (Gen IV 1998-02)
l
LS3/L92 Rectangular Port Camaro/GTO (Gen V 2010-12)
l
LS3/L92 Rectangular Port
Corvette
l
LS3/L92 Rectangular Port Truck (88mm Throttle Body)
l
LS7 Rectangular Port
Corvette

POWER PACKAGES KITS

547 ft-lbs

250

Edelbrock has designed these universal supercharger systems for street rods and muscle cars with
GM LS Gen III and IV engines. The supercharger housing features 12 long runners for maximum low end
torque and great drivability. System #1540 produced 599+ flywheel horsepower and 547+ ft-lbs. of torque.
Edelbrock E-Force systems are designed to provide instant and reliable horsepower with low boost for
minimum stress on the engine. Its compact design fits under the stock hood on most applications and
complements the clean look of any engine compartment. These systems require the use of a universal
heat exchanger (sold separately, see page 153 for listings). System #1540 includes handheld tuner for
use with GM Parts LS Series Engine Control System #19258270. Call for custom configurations.

CAMSHAFT & VALVETRAIN

Universal System #1540 Shown

500

CARBURETORS

SUPERCHARGERS

CYLINDER HEADS GASKETS MANIFOLDS

UNIVERSAL HEAT EXCHANGER KITS

KITS POWER PACKAGES

CAMSHAFT & VALVETRAIN

Full-Face Heat Exchanger #15405

SUPERCHARGERS

Square Heat Exchanger #15407

EFI
CRATE ENGINES
WATER PUMPS

Description
Full-Face Heat Exchanger
Compact Heat Exchanger
Square Heat Exchanger
Large Heat Exchanger
Small Heat Exchanger

Width
22
26.5
16
34
17

Dimensions
Height
Depth
16.5
1.5
5
2.62
16
1.5
14
2.25
11
2

Compact Heat Exchanger #15406

Emissions
Code
ll
ll
ll
ll
ll

Part #
#15405
#15406
#15407
#15408
#15409

Large Heat Exchanger #15408

FUEL INJECTORS
41 lb/hr Fuel Injectors #15807

60 lb/hr Compact Fuel Injectors #15903

ACCESSORIES
NITROUS

Edelbrock offers a choice of five universal heat exchangers to work with the E-Force Universal
Supercharger systems. These heat exchangers offer reliability and durable construction for high
performance street applications.
Full-Face Heat Exchanger is a single pass, single row, offset fin design with a 3/4 barbed inlet and outlet.
It also features eight M6x1.0 threaded bungs, two at every corner, for easy installation.
This exchanger provides 31,000 btu/hr. of heat transfer.
Compact Heat Exchanger is a single pass, two row design. It also features six M6x1.0 threaded bungs,
two on the top and four on the bottom for ease of installation and a 3/4 barbed inlet and outlet.
This exchanger provides 22,000 btu/hr. of heat transfer.
Square Heat Exchanger is a single pass, single row design that features six, M6x1.0 threaded bungs, two
on the right, two on the left and two on the bottom for ease of installation. Also includes a 3/4 barbed inlet
and outlet on top and bottom for custom plumbing. This exchanger provides 22,000 btu/hr. of heat transfer.
Large Heat Exchanger is a dual pass, single row design that features four, M6x1.0 threaded bungs, two
on the right and two on the left for ease of installation. Also includes a 3/4 barbed inlet and outlet on one
side for custom plumbing. This exchanger provides 55,000 btu/hr. of heat transfer.
Small Heat Exchanger is a dual pass, single row design that includes four M6x1.0 threaded bungs, two on
the right and two on the left for ease of installation. They also include a 3/4 barbed inlet and outlet on one
side for custom plumbing. This exchanger provides 26,700 Btu/hr. of heat transfer.

Small Heat Exchanger #15409

Edelbrock has a complete selection of fuel injectors that are the perfect accessory for our Stage 3
supercharger systems. Edelbrock fuel injector flow rates are at 300 Kpa or 43.5 psi.
Body Style Connector
Emissions
LB/HR
(Length)
Style
Kit Supplied In
For Use With Spray
Code
Part #
l
41
Long (60 mm)
USCAR #1580, #1581, #1582, #1583 #1585,#1587
Dual
#15807
46

Medium (48 mm)

USCAR

50

Long (60 mm)

USCAR

52

60
60
Fuel Injector Adapters #15904

FUEL PUMPS
SPORTSWEAR
INDEX

COMPONENTS & ACCESSORIES

Compact (38 mm)

USCAR

#1530, #1532,#1534,
#1535,#1536, #1538
#1588,#1584, #15986
#1574, #1575, #1590,
#1591, #1593, #1594,
#1597, #1598

#1531, #1533, #1537

Cone

#15909

Dual

#15901

#1576, #1592,
#1596, #1599

Offset
Cone

#15907

Cone

#15903

Cone

#3686

#1573, #1576
#1586, #1592
Compact (48 mm) Minitimer #1572, #1540, #1521,#1523 #1595, #1596
#1599, #15997
#1520, #1522
Long (60 mm) Minitimer

#1585, #1587, #1589

Important Installation Notes: Injector length is measured from o-ring to o-ring.

Fuel Injector Adapter (Set of 8) ..................................................................................................................#15904

Required for use with minitimer injectors on vehicles originally equipped with USCAR injectors.

E-FORCE FUEL RAILS FOR 2005-10 MUSTANGS

E-Force Fuel Rail Kit #3623

153

These fuel rails are designed for use with our 2005-10 Ford Mustang 4.6L 3V E-Force Supercharger
Competition systems. These high capacity fuel rails are made from extruded aluminum and feature -6 AN
ends for increased flow to support the demands needed in high horsepower applications. They also include
positioning brackets to secure the injector in the ideal position for optimum performance. Kit contains fuel
rails, fuel hoses, fittings, mounting brackets and all of the necessary hardware needed for installation.
E-Force Fuel Rail Kit for 2005-10 Ford Mustang (4.6L 3V) .....................................................................#3623

WWW.EDELBROCK.COM

CARBURETORS

COMPONENTS & ACCESSORIES SUPERCHARGERS

E-Force Competition Air Intake kits provide the increased air flow needed for racing applications.
They include a high flow Mass Air Flow Sensor (on some applications), reusable open element filter,
plastic shroud and all necessary hardware for installation. Mustang GT kits include a 7" long, reusable,
open element filter and a plastic intake shroud. Camaro kit utilizes a 9" long, reusable, open element filter
and plastic intake shroud. Kit #15803 is intended for use when upgrading from system #1580, which already
includes a sensor. These kits are for Competition use only.

E-Force Competition Air Intake System #15988

Model
Camaro SS (Uses factory MAF sensor)
Mustang GT (without MAF sensor)
Mustang GT
Mustang GT
Mustang GT

Emissions
Code
l
l
l
l
l

Part #
#15988
#15803
#15808
#15828
#15898

REPLACEMENT CONICAL AIR FILTER

NITROUS

154

INDEX

PLEASE REFER TO PAGE 212 FOR MORE INFORMATION REGARDING THE EMISSIONS GUIDE.

SPORTSWEAR

Replacement Lid Gasket #7397

FUEL PUMPS

This is a replacement gasket for the E-Force supercharger lid cover. Will fit the following applications:
Camaro systems #1562, #1563, #1596, #1597, #1598, #1599, #15960, #15990; Corvette systems #1572, #1573, #1574,
#1575, #1576, #1590, #1591, #1592, #1593, #1594, #1595; Truck/SUV systems #1564, #1567, #1577, #1578, #1579.
E-Force Supercharger Lid Replacement Gasket .......................................................................................#7397

l 50-STATE LEGAL l RACING ONLY l PRE-POLLUTION CONTROLLED VEHICLES l STOCK REPLACEMENT l ENGINE SWAP

ACCESSORIES

REPLACEMENT LID GASKET

EMISSIONS GUIDE

WATER PUMPS

MAFS Sensor Kit #15401

Edelbrocks high flow Mass Air Flow Sensor (MAFS) for GM and Ford applications are the perfect
upgrade for any MAFS equipped vehicle with performance upgrades that have elevated air flow above
the range of the stock sensor. The Ford sensor #15402 increases the air flow to 113 lbs. per minute.
Both kits utilize a large 95mm venturi style housing that reduces air flow restriction and improves the
overall horsepower potential. These sensors feature an injection molded housing for OEM level precision
with a modern blade-style element for the latest in technology and easy installation on newer vehicles.
Match these kits with our conical air filters for the optimal air flow performance upgrade.
Emissions Code
Mass Air Flow Sensor Kit for GM Universal Applications ............................................l .................#15401
Mass Air Flow Sensor Kit for Ford Universal Applications ..........................................l .................#15402

CRATE ENGINES

MAF SENSOR KITS

EFI

The Edelbrock Pro-Charge Air Filter cleaning kit is the ideal formula for keeping performing at its best.
Designed for use with any oil-based air filter element and available in a complete kit or individually.
Pro-Charge Air Filter Cleaning Kit (includes #43601 & #43602).......................................................#43600
Air Filter Cleaner (10.14 oz) ........................................................................................................................#43601
Air Filter Oil (10.14 oz) .................................................................................................................................#43602

SUPERCHARGERS

PRO-CHARGE AIR FILTER CLEANING KIT

POWER PACKAGES KITS

Pro-Charge
Cleaning Kit #43600

These replacement air filters will work with Edelbrock E-Force Competition Air Intake Kits as well as other
aftermarket cold air intake systems. Available in 7 or 9 length with a 6 inlet diameter. Both air filters
are washable and reusable.
Emissions Code
7" Universal Replacement Conical Air Filter ...................................................................l .................#15403
9" Universal Replacement Conical Air Filter ...................................................................l .................#15404

CAMSHAFT & VALVETRAIN

Conical Air Filter #15403

Year
2010-14
2005-09
2005-09
2010
2011-14

MANIFOLDS GASKETS CYLINDER HEADS

E-FORCE COMPETITION AIR INTAKE KITS

CARBURETORS
CYLINDER HEADS GASKETS MANIFOLDS

COMPONENTS & ACCESSORIES

18% OVERDRIVE DAMPER FOR 5.0L COYOTE

This is an overdrive damper for the Ford 5.0L Coyote engine. It features a 7.75 diameter 8-rib design
that delivers maximum traction and stability in supercharged applications. Can also be used with 6-rib
applications. It's an ideal solution for any supercharged application where a smaller pulley is not an
option. This is the same damper used on our E-Force Coyote crate engine. This damper is SFI approved
and recommended for supercharged applications only.
Harmonic Damper for Ford 5.0L Coyote Engines (7.75 diameter) ......................................................#15819

Harmonic Damper #15819

15% OVERDRIVE CRANK PULLEY

FOR E-FORCE EQUIPPED 2014-15 CORVETTE'S

This overdrive crank pulley is for use with a 2014-15 Corvette Stingray with an Edelbrock E-Force
Supercharger system installed. It features an 8.7" diameter 10-rib secondary and stock diameter primary
drive that delivers maximum traction and stability in supercharged applications. Its an ideal solution
when a smaller pulley is not an option. This crank pulley is for use with Edelbrock C7 Corvette E-Force
Supercharger systems only.
Emissions Code
Overdrive Crank Pulley for C7 Corvette E-Force Supercharger Systems (8.7") ............ l ..................#15815

Overdrive Crank
Pulley #15815

KITS POWER PACKAGES

CAMSHAFT & VALVETRAIN

SUPERCHARGERS

REPLACEMENT HARMONIC DAMPERS

FOR E-FORCE EQUIPPED 2014-15 CORVETTE'S

These replacement dampers are for use with 2014-15 C7 Corvette Stingrays equipped
with an E-Force supercharger system. They are the same dampers that are supplied
with all E-Force Corvette Stingray Supercharger systems. Damper #15709 can be use
to convert a wet sump oil system to a dry sump system and #15719 can be used to
convert a dry sump oil system to a wet sump oil system. Includes damper and bolt.
Harmonic Damper for 2014-15 Chevrolet Corvette Z51 (Dry Sump) .......................................................#15709
Harmonic Damper for 2014-15 Chevrolet Corvette Base Model (Wet Sump)......................................#15719

6 RIB-PULLEYS

Edelbrock E-Force pulleys allow you to fine tune

the air flow and performance of your E-Force
Supercharger system to your preference. They
are available in a 6-rib design for use with any of
our Stage 3 Professional Race systems. These
pulleys feature a black anodized finish.
6-Rib Supercharger
Pulleys

ACCESSORIES

WATER PUMPS

CRATE ENGINES

EFI

SUPERCHARGERS

Harmonic Damper #15709

10-RIB PULLEYS

INDEX

SPORTSWEAR

FUEL PUMPS

NITROUS

Edelbrock E-Force pulleys allow you to fine tune

the air flow and performance of your E-Force
C7 Corvette or Enforcer Supercharger system to
your preference. They feature a 10-rib design for
use with our E-Force street rod and muscle car
Supercharger systems. Choose from a high quality
mirror polished or black hard anodized finish.

10 Rib Pulleys

155

Size
2.75"
3.00"
3.25"
3.50"
3.75"
3.875"
4.125"

Size
2.75"
3.00"
3.25" 1
3.50" 2
3.75"
3.875"
4.00"
4.125" 3

Emissions Code
l
l
l
l
l
l
l

Emissions
Code
ll
ll
ll
ll
ll
ll
ll
ll

Polished
#15855
#15853
#15851
#15829
#15844
#15827
#15843
#15842

Black
#15823
#15822
#15821
#15820
#15825
#15824
#15826

Black
#15854
#15852
#15850
#15849
#15848
#15847
#15846
#15845

1: Included in C7 Stage 2 kits

2: Included in Enforcer LS and C7 Stage 1 kits
3: Included in Enforcer small-block Chevy kits

WWW.EDELBROCK.COM

CARBURETORS

COMPONENTS & ACCESSORIES SUPERCHARGERS

This kit includes everything needed to install E-Force Supercharger systems #1590 and #1591 on a
2010-13 Corvette Grand Sport equipped with a dry sump oiling system. For use with manual transmission
models only. Not required for use with #1574 and #1575.
Dry Sump Accessory Kit .............................................................................................................................#15905

Dry Sump Accessory Kit #15905

Belt Tensioner Brace #15806

Part #
#15028
#15029
#15032
#15034
#15035
#15039

ALUMINUM COIL/SIDE COVERS

ACCESSORIES

Aluminum Side
Covers #41133

WATER PUMPS

Dress up your competition kit with these coil covers that are included with the E-Force complete
supercharger systems #1530, #1532, #1536, #1570, #1571, #1572, #1574, #1575, #1580, #1582, #1590, #1591,
#1593, #1594, #1597 and #1598.
Year Model
Part #
Year Model
Part #
2014-15 Corvette
#41124
2005-10 Mustang GT 4.6L
#41133
2010-15 Camaro SS
#41143
2015 Mustang GT 5.0L
#41135
2010-13 Camaro SS
#41142
2005-13 Corvette
#41123
2005-10 Chrysler HEMI
#41113
Corvette Grand Sport with
#41103
2010-13
Dry Sump (LS3) & Z06 (LS7)
2011-14 Chrysler HEMI
#41114

CRATE ENGINES

Tensioner Upgrade Kit #15035

Tensioner Upgrade for

#1597
#1598
#1596, #1599 & #15997
#1574, #1590 & #1593
#1572, #1575, #1591 & #1594
#1573, #1576, #1592 & #1595

EFI

Tensioner Upgrade Kits are engineered to handle

the increased belt stress encountered in high
horsepower E-Force applications. They are an
upgrade for any Edelbrock supercharger system
produced prior to February 2013 and are now
included on all systems thereafter. Kit includes
tensioner, tensioner mounting bracket, Gatorback
drive belt (except #15039 and #15032) and hardware.

SUPERCHARGERS

TENSIONER UPGRADE KITS FOR

GM SUPERCHARGER SYSTEMS

POWER PACKAGES KITS

This belt tensioner brace is intended for use on 2005-10 Mustangs, 2004-10 F-150 trucks and 2007-13 Ford
SUVs with an aftermarket supercharger installed. The stock belt tensioner is cast aluminum and has
been known to bend and even break under extreme driving. The Edelbrock Steel Belt Tensioner Brace is
an inexpensive solution to this common problem. It simply bolts on to your stock tensioner and prevents
any deflection of the cast arm. Already included with E-Force supercharger systems #1580, #1581, #1582,
#1583, #1585 and #1587.
Steel Belt Tensioner Brace ........................................................................................................................#15806

CAMSHAFT & VALVETRAIN

BELT TENSIONER BRACE

MANIFOLDS GASKETS CYLINDER HEADS

DRY SUMP ACCESSORY KIT

NITROUS
FUEL PUMPS

Aluminum Side
Covers #41113

Aluminum Side
Covers #41143

EMISSIONS GUIDE

PLEASE REFER TO PAGE 212 FOR MORE INFORMATION REGARDING THE EMISSIONS GUIDE.

156

INDEX

l 50-STATE LEGAL l RACING ONLY l PRE-POLLUTION CONTROLLED VEHICLES l STOCK REPLACEMENT l ENGINE SWAP

SPORTSWEAR

Aluminum Side Covers #41124

CARBURETORS
CYLINDER HEADS GASKETS MANIFOLDS

Edelbrock EFI Systems are tested on our dyno

to ensure they perform as guaranteed!

Our complete line of EFI systems gives you several options to choose from when deciding to upgrade
your engine to modern electronic fuel injection. Our EFI systems provide better cold starts, consistent
performance at high altitudes, excellent throttle response and improved engine performance. They also
offer the potential for improved fuel economy by more closely regulating the fuel and ignition requirements
of the engine. Our E-Street 2 and next generation Pro-Flo 3 are the most complete EFI systems available
on the market, giving you everything you need to add the power, performance and efficiency of fuel
injection to your vehicle. Both systems rely on self-mapping fuel technology and our E-Tuner Android app
to simplify your tuning experience, no complicated laptop software requiring a PHD in engineering to tune
your engine. All of these systems are dyno-tested to deliver proven-performance results. Finally, we offer
a dedicated support staff to assist you and answer any questions. Our EFI systems offer you the least
complexity and most value for your dollar!

CHOOSE FROM FOUR LEVELS OF PERFORMANCE

E-STREET 2 EFI SYSTEM

E-Street 2 Throttle Body EFI puts the emphasis on simplicity. This universal EFI system is easy to install
and includes self mapping fuel technology - making it ideal for use on any V8 engine application equipped
with a standard square-bore intake manifold. These systems are ideal for novice hot rod enthusiast
desiring the benefits of EFI. See page 159 for more information.
Advanced Throttle Body Fuel injection
Accepts traditional round air cleaners and
maintains same hood clearance as a carb
No tuning experience required - System
provides self-mapping fuel technology to
Easy to use E-Tuner App that communicates via
continually monitor and adjust fuel calibration
Bluetooth wireless for ECU setup and engine
tuning adjustments. No Laptop required
Ready to run right out of the box
with pre-loaded calibrations
System capable of adapting to limitless engine
and camshaft profiles.
Supports fully programmable Ignition Control
to optimize performance and fuel economy
Available with or without 7" Android Touch
screen device with pre-loaded E-Tuner App

SUPERCHARGERS

PRO-FLO 3 EFI SYSTEMS

WATER PUMPS

CRATE ENGINES

EFI

Pro-Flo 3 EFI is the next step up from our entry level E-Street 2 system. This system uses our self mapping
fuel technology to simplify your EFI conversion experience. These kits include everything you need to
upgrade your engine to direct port fully sequential fuel injection. Giving you the best EFI performance
possible with minimal complications. See pages 161 for more information.
Advanced Throttle Body Fuel injection
Easy to use E-Tuner App that communicates via
Bluetooth wireless for ECU setup and engine
No tuning experience required - System
tuning adjustments. No Laptop required
provides self-mapping fuel technology to
continually monitor and adjust fuel calibration
System capable of adapting to limitless engine
and camshaft profiles.
Ready to run right out of the box
with pre-loaded calibrations
Available with or without 7" Android Touch
screen device with pre-loaded E-Tuner App
Supports fully programmable Ignition Control
to optimize performance and fuel economy

PRO-FLO 2 EFI SYSTEMS

NITROUS

ACCESSORIES

Pro-Flo 2 systems are the next step up from our entry level E-Street 1 systems. These systems include
everything you need to upgrade your engine to direct port programmable fully sequential injection.
Giving you the best performance possible. See pages 163-164 for more information.
Fully sequential direct port EFI
Option of tuning through the exclusive
handheld Calibration Module
Features a down-draft 4V throttle body for use
(no laptop required)
with a round air cleaner for a traditional look

High
resolution fuel and spark tuning maps
Dual tuning methods include Speed
Density Map-N (engine speed vs. manifold
Software allows for saving unlimited tunes
absolute pressure) and Alpha-N (engine
and is compatible with limitless cam profiles
speed vs. throttle position)

PRO-FLO XT EFI SYSTEMS

FUEL PUMPS

Pro-Flo XT systems offers fully sequential injection along with an all new intake manifold design for
increased power and performance. See pages 163-164 for more information.
All of the same great features of
Two-piece EFI harness connects the engine
our Pro-Flo 2 systems Plus more
harness and chassis harness at the firewall
for quick connection and easy removal
Completely ALL NEW intake manifold design
with front mounted 90mm throttle body
Available in satin aluminum or black powder
coated finish with contrast machine accents
In testing, these intakes average a 20 hp gain
over a traditional single plane design

SPORTSWEAR
INDEX

INTRODUCTION

EDELBROCK EFI SYSTEMS

KITS POWER PACKAGES

CAMSHAFT & VALVETRAIN

EFI SYSTEMS

157

WWW.EDELBROCK.COM

CARBURETORS

COMPARISON CHART EFI

SYSTEMS

MANIFOLDS GASKETS CYLINDER HEADS

EDELBROCK PERFORMANCE...
DYNO TESTED AND STREET PROVEN
Vic Edelbrock's '32 Ford Coupe, built by Roy Brizio, made the
long haul on the 2013 Power Tour with
Edelbrock E-Street EFI system
under the hood. The small-block
Ford 347 c.i. crate engine
makes 438 horsepower
and 413 ft-lbs. torque
on pump gas with
a 16 mpg average.

CAMSHAFT & VALVETRAIN

Edelbrock core products

are manufactured
in the USA for
unsurpassed quality.

System Features

E-Street 2

Pro-Flo 3

Pro-Flo 2

Pro-Flo XT

SUPERCHARGERS

Ready to run right out of the box.

Requires some computer skills
Requires basic tuning and fuel injection knowledge
Wide Band Sensor included

EFI

Wide Band Closed Loop fuel Control

Self Mapping Fuel technology

CRATE ENGINES

Narrow Band O2 Sensor included

Throttle Body style Fuel Injection technology
Full sequential Direct Port Fuel Injection (individual injector firing)
ECU is flash programmable(no chip) and includes base calibration

WATER PUMPS

Real time tuning with E Tuner App and Android Cell Phone or Tablet
Bluetooth Communication
Adjustable Rev Limiter

ACCESSORIES

Programmable Dual fan controls

Programmable Idle Speed control
Capable of direct firing an Ignition Coil
Kits come complete with Ignition Control components

NITROUS

Ignition Control Kit sold separately

Intake manifold must be EFI specific for injector locations.

FUEL PUMPS

Kits come complete with Edelbrock EFI Intake Manifold

Plenum style Intake Manifold design with late model LS 90 mm Throttle Body
Automatic system update notifications via Google Play store
Requires the use of PC for Windows based software and first time calibration selection

SPORTSWEAR

Required USB to serial adapter included in kit

Basic Real time tuning adjustment with wired handheld Cal Module

EMISSIONS GUIDE

PLEASE REFER TO PAGE 212 FOR MORE INFORMATION REGARDING THE EMISSIONS GUIDE.

158

INDEX

l 50-STATE LEGAL l RACING ONLY l PRE-POLLUTION CONTROLLED VEHICLES l STOCK REPLACEMENT l ENGINE SWAP

POWER PACKAGES KITS

EDELBROCK EFI SYSTEMS COMPARISON CHART

CARBURETORS

EFI SYSTEMS

CYLINDER HEADS GASKETS MANIFOLDS

SUPPORTS UP TO
600 HORSEPOWER

BLUETOOTH CONNECTIVITY

E-Street 2 EFI System #3664 Shown

E-STREET 2 EFI SYSTEM

AFFORDABLE UNIVERSAL THROTTLE BODY FUEL INJECTION

The Edelbrock E-Street 2 EFI is available with
an optional easy-to-use 7" touch screen tablet
to setup and monitor engine functions

BASE SYSTEM INCLUDES:

Engine Control Unit

7" Touch Screen Tablet (optional)
Complete Wiring Harness
Fully Assembled Throttle Body
E-Tuner Application for setup
and Engine Monitoring
Wide Band Oxygen Sensor
Gasket & Hardware
Detailed Installation Instructions

The E-Street 2 EFI E-Tuner App offers multiple digital

gauge displays to choose from and is compatible
with popular Android phones and tablets

Ready to convert your V8 from a carburetor to a basic affordable EFI system? Then E-Street 2 EFI is
your best option. Most E-Street 2 conversions can be completed in a single day requiring only basic
mechanical skills and minimal tools. No complicated manifold swap necessary. E-Street 2 utilizes our
self-mapping fuel technology and E-Tuner Android App to simplify your tuning experience. Combine
your E-Street 2 EFI with an Edelbrock Universal EFI Sump Fuel kit and you only have to reach under your
vehicle to install the O2 Sensor.
E-Street 2 EFIs new features include enhanced Bluetooth connectivity, refined base calibrations for
a reduced self learning period, and a reworked throttle body with a true Carb look to help retain your
vehicles classic under hood appearance. Another big change to E-Street 2 is the addition of ignition control.
Ignition control has the capability to direct drive an ignition coil (optional Ignition Control Kit required),
eliminating the extra expense and headaches involved with installing a CDI box. It also allows you to fully
customize your ignition curve for ultimate power and MPG with in the E-Tuner App. Finally, E-Street 2 is
now compatible with most Android phones and tablets, allowing you to use your personal phone or
tablet to tune and monitor your E-Street 2 EFI System. Our E-Tuner App is available at no charge from
Google Play Store or visit www.edelbrock.com/etuner for more information.

FEATURES INCLUDE:

Ready to run right out of the box

with pre-loaded calibrations
Self Mapping Fuel Technology...
No tuning experience required
System monitors Air Fuel Ratios and adjusts
fuel calibration to continually improve engine
performance as the vehicle is driven
Optional Ignition Control...
Capable of direct driving an ignition
coil No CDI box necessary
Adjust ignition curve with the E-Tuner App
for optimal performance and MPG
System automatically compensates
for altitude and weather changes
Industry leading dedicated support staff
to assist and answer any questions

Includes easy to use E-Tuner App that features...

Bluetooth connectivity between
ECU and Android phone or tablet
Multiple control functions including
two adjustable cooling fan outputs, idle
speed, AFR set points, acceleration fuel
tuning and optional ignition control
Includes multiple dash display configurations
for monitoring engine vitals and performance
Compatible with most Android
phones and tablets
Available free from the Google Play store and
will automatically send notifications when
updates are available
Includes a fully assembled OEM quality wiring
harness with pre terminated connectors and
labeled connection for a simplified installation

Description
E-Street 2 EFI System (base system only without fuel supply system)
E-Street 2 EFI System (base system with Return-Style Fuel Kit #3604)
E-Street 2 EFI System (base system with Universal EFI Sump Fuel Kit #3605)

FUEL PUMPS

NITROUS

ACCESSORIES

WATER PUMPS

CRATE ENGINES

EFI

SUPERCHARGERS

KITS POWER PACKAGES

CAMSHAFT & VALVETRAIN

CONNECT TO THE ENGINE CONTROL UNIT

WITH YOUR ANDROID PHONE OR TABLET

Emissions
Code
l
l
l

With
Tablet
#3664
#3665
#3667

Without
Tablet
#36649
#36659
#36679

Installation Notes: This system will require a high pressure EFI compatible fuel delivery system. Some ignition systems
may require additional components to be compatible with E-Street EFI system. Call for more info. Multiple fuel delivery
kits are available and sold separately, see page 162 for selecting the right kit for your installation. E-Street 1 systems
harness and ECU are not compatible with E-Street 2 system, doing so will damage the ECU.

SPORTSWEAR
INDEX

E-STREET

159

WWW.EDELBROCK.COM

CARBURETORS

E-STREET EFI

SYSTEMS

NOW AVAILABLE WITH IGNITION CONTROL

FOR INCREASED PERFORMANCE

Now you can get the ultimate control of your engine when using the expanded ignition timing control
feature of E-Street 2 EFI. This new feature gives you the ability to easily adjust your ignition curve
specifically for your engine setup, eliminating the hassle, complexity and limitations of the standard
distributor advance mechanism. This type of control will result in a smoother idle, faster acceleration,
better peak power, improved fuel economy and the ability to control detonation, all with the touch of your
finger in the E-Street 2 EFI E-Tuner app. The purchase of one of our Ignition Control kits, sold separately,
is required in order to access this exciting new feature.

E-STREET 2 EFI IGNITION CONTROL KITS

CAMSHAFT & VALVETRAIN

These E-Street 2 EFI Ignition Control Kits allow you to take advantage of the new ignition control
functions of E-Street 2 EFI. Each kit includes a high quality plug and play distributor designed specifically
for E-Street 2 EFI and wiring harness.
AMC 1967-1969 343-390 & 1970-1991 304-401 ..........................................................................................#3679
Small and Big-Block Chevy .......................................................................................................................#3674
Ford 289-302 ...................................................................................................................................................#3675
Ford 351W ......................................................................................................................................................#3676

MANIFOLDS GASKETS CYLINDER HEADS

E-STREET 2 EFI SYSTEM

POWER PACKAGES KITS

THE REVIEWS ARE IN

160

INDEX

PLEASE REFER TO PAGE 212 FOR MORE INFORMATION REGARDING THE EMISSIONS GUIDE.

SPORTSWEAR

l 50-STATE LEGAL l RACING ONLY l PRE-POLLUTION CONTROLLED VEHICLES l STOCK REPLACEMENT l ENGINE SWAP

FUEL PUMPS

EMISSIONS GUIDE

NITROUS

Edelbrocks E-Street 2 EFI and Pro-Flo 3 line of fuel injection systems utilize the latest in
Bluetooth Mobile Technology all tuning related function can be done on your Android smart
phone or tablet device with the Edelbrock E-Tuner App. The E-Tuner App features an easy to
use setup wizard to guide you through the setup process for your specific engine package.
E-Tuner App also includes page specific help files for assistance if needed. Bright and vibrant
dash displays in various configurations included to help monitor engine function. E-Tuner App
is available free from Google Play Store, Android devices will receive automatic App update
notifications as Edelbrock releases updates.

ACCESSORIES

THE MOST ADVANCED EFI TECHNOLOGY ON THE MARKET

WATER PUMPS

Wow! Im a believer in this product! Night and day difference! Seriously

man, the idle on the car is so smooth and the throttle response is so crisp
and I can definitely feel that the car has more power. Its pretty amazing.
Kenny Wayne Shepherd. Owner of Xtreme Lee
American guitarist, singer, and songwriter.

CRATE ENGINES

Installing the entire system took us under eight leisurely hours in the shop
and required no extra parts other than what was included in the kit.
Bryan Irons. UPPING the PRESSURE
4Wheel Drive Magazine, February 2014: 80-87. Print

EFI

we went from getting 14 mpg with the carb on our highway loop, to 18.5
mpg with the E-Street EFI, an improvement of 32% over the 750 cfm carb.
Johnny Hunkins. Edelbrock E-Street EFI
Popular Hot Rodding Magazine, January 2014: 60-63. Print

SUPERCHARGERS

Ignition Control Kit #3674

CARBURETORS

BLUETOOTH CONNECTIVITY

CONNECT TO THE ENGINE CONTROL UNIT

WITH YOUR ANDROID PHONE OR TABLET

PRO-FLO 3 EFI SYSTEM

The Edelbrock Pro-Flo 3 EFI system is available with
an optional easy-to-use 7" Android touch screen
tablet for setup and monitor engine functions

SUPERCHARGERS

KITS POWER PACKAGES

Pro-Flo 3 EFI System #3220 Shown

EFI
CRATE ENGINES
WATER PUMPS

Engine Control Unit

7" Touch Screen Tablet (optional)
Fully Assembled intake manifold
with air valve, fuel rails and injectors
Complete high quality Wiring Harness
E-Tuner Application for setup
and Engine Monitoring
Wide Band Oxygen Sensor
Distributor and coil
Gaskets & Hardware
Installation Instructions

Our Pro-Flo 3 EFI systems are the next step up from our popular E-Street 2 EFI systems and the next
generation in Pro-Flo EFI. Pro-Flo 3 has combined all the great features of E-Street 2 with the power and
efficiency of Pro-Flo 2 sequential port EFI. If you desire the performance and look of true fuel injection,
but have always been intimidated by the complexity involved in tuning calibrations and related tables,
then Pro-Flo 3 is for you. This kit does not requires laptop tuning. Pro-Flo 3 also utilizes an optional 7"
touchscreen tablet or your Android phone with our E-Tuner App and self-mapping fuel technology and to
simplify your tuning experience. The E-Tuner App contains dyno tuned base calibrations for your specific
application to minimize tuning. Pro-Flo 3 is compatible with most Android phones and tablets, allowing
you to use your personal phone or tablet to tune and monitor the System. Our E-Tuner App is available at
no charge from Google Play Store or visit www.edelbrock.com/etuner for more information.
Ready to run right out of the box
with pre-loaded calibrations
Self Mapping Fuel Technology...
No tuning experience required
System monitors Air Fuel Ratios and adjusts
fuel calibration to continually improve engine
performance as the vehicle is driven
Optional Ignition Control...
Capable of direct driving an ignition
coil No CDI box necessary
Adjust ignition curve with the E-Tuner App
for optimal performance and MPG
System automatically compensates
for altitude and weather changes
Industry leading dedicated support staff
to assist and answer any questions

Includes easy to use E-Tuner App that features...

Bluetooth connectivity between
ECU and Android phone or tablet
Multiple control functions including
two adjustable cooling fan outputs, idle
speed, AFR set points, acceleration fuel
tuning and optional ignition control
Includes multiple dash display configurations
for monitoring engine vitals and performance
Compatible with most Android
phones and tablets
Available free from the Google Play store and
will automatically send notifications when
updates are available
Includes a fully assembled OEM quality wiring
harness with pre terminated connectors and
labeled connection for a simplified installation

Description
Pro-Flo 3 1986-Earlier Small-Block Chevrolet with Standard Heads
Pro-Flo 3 Small-Block Chevrolet with Vortec or E-Tec Heads
Pro-Flo 3 XT for 1986-Earlier Small-Block Chevrolet with Standard Heads
Pro-Flo 3 XT for Small-Block Chevrolet with Vortec or E-Tec Heads
Pro-Flo 3 XT for 1986-Earlier Small-Block Chevrolet with Standard Heads
Pro-Flo 3 XT for Small-Block Chevrolet with Vortec or E-Tec Heads

NITROUS

ACCESSORIES

PRO-FLO 3 SYSTEMS INCLUDE:

FUEL PUMPS
SPORTSWEAR

AFFORDABLE SEQUENTIAL PORT FUEL INJECTION

FEATURES INCLUDE:
Advanced Ignition Timing Control Features

INDEX

PRO-FLO 3 FOR S/B CHEVY

SUPPORTS UP TO
750 HORSEPOWER

CAMSHAFT & VALVETRAIN

CYLINDER HEADS GASKETS MANIFOLDS

EFI SYSTEMS

Universal EFI Sump Fuel Kit #3605 Installed

161

Finish
Satin
Satin
Satin
Black
Satin
Black

Emissions
Code
l
l
l
l
l
l

With
Tablet
#3220
#3225
#3227
#32273
#3228
#32283

Without
Tablet
#32220
#32250

Installation Notes: #3220/#32220/#3227/#3228 recommended intake gasket: Edelbrock #7201. #3225/#32250/#32273/#32283

recommended intake gasket: Edelbrock #7235. These systems will require a high pressure EFI compatible fuel delivery
system. Fuel delivery kits are available and sold separately, see the next page for selecting the right kit for your installation.
#3220/#32220 manifold height: 4.58". #3225/#32250 Manifold height: 4.58", throttle body height: 2.25". #3227/#32273/#3228/#32283
Manifold height: A-9.2", B-8.4", C-16.9", D-2.1", E-0 (see page 81 for manifold reference dimensions).

WWW.EDELBROCK.COM

CARBURETORS

FUEL KITS EFI

SYSTEMS

Selecting the right fuel delivery system is critical to the performance of any EFI application. To help you select the ideal system for your vehicle and engine
combination, simply review the chart below to ensure a hassle free installation and the best performance for your vehicle.
Features & Benefits

Limitations

RETURN-STYLE FUEL KIT

Supports up to 600 HP
Fuel pressure can be adjusted for optimum performance
Higher horsepower capacity than returnless system
Includes a return line to eliminate the potential for
fuel vapor lock
Supports up to 750 HP
Easy to install
No need to run new fuel lines under vehicle
No issue with fuel starvation, due to sloshing
No fuel tank modifications required
Maintains pressure at low fuel levels

Will not work for 600+ HP engines

Unbaffled tanks may exhibit fuel starvation,
due to sloshing at low fuel levels
Requires a return fitting to be installed
in the fuel tank

#3604

Will not work for 750+ HP engines

Requires an existing mechanical or
electric, low pressure pump in vehicle
Requires sufficient space to mount
the sump in engine compartment

#3605
#3607
#36031
#36033

For any vehicle that is capable of mounting a fuel

pump in a location lower than the fuel tank. Must have
a gravity fed path from the fuel tank to the fuel pump.
Performs well in all weather conditions.

UNIVERSAL EFI SUMP FUEL KIT

For any vehicle with an existing low pressure fuel

system. Any user desiring any easy installation that
delivers reliable fuel pressure performance and no
potential for starvation at low fuel levels. Performs
well in all weather conditions.

Part No.

RETURN-STYLE FUEL KIT

UNIVERSAL EFI SUMP FUEL KITS

Return-Style Fuel Kit #3604

Vent Tube

WATER PUMPS

Regulator
Adjustment &
Vacuum Reference

Adjustable Universal EFI Sump Fuel #36033 Features

Part No.
#3605
#3607
#36052
#36031
#36033
#36032
#36034

EMISSIONS GUIDE

PLEASE REFER TO PAGE 212 FOR MORE INFORMATION REGARDING THE EMISSIONS GUIDE.

162

INDEX

l 50-STATE LEGAL l RACING ONLY l PRE-POLLUTION CONTROLLED VEHICLES l STOCK REPLACEMENT l ENGINE SWAP

SPORTSWEAR

Universal EFI Sump Fuel Kit #3607

This Supplemental Harness Kit is required when installing Edelbrock Return-style Fuel Kit #3604 or
Universal Sump Fuel kit #3605, #3607 and #36052 with E-Street 1 EFI systems. This harnesses is not
included in the Fuel Sump kits mentioned above. This harness kit is included in the complete E-Street 1
EFI system with Sump Fuel kit #3606. Includes fuel pump relay harness and a fuel sump adapter harness.
Failure to use this harness will cause damage to the fuel pump driver in the ECU.
Supplemental Harness Kit...........................................................................................................................#36054

FUEL PUMPS

EFI SUPPLEMENTAL HARNESS KIT

NITROUS

Pressure Max Flow

Size
(PSI) Rate (GPH) (H x W x D)
58
67
13" x 7.75" x 5"
49
67
13" x 7.75" x 5"
58
67
13" x 7.75" x 5"
35-90
67
9" x 10" x 3.75"
35-90
105
9" x 10" x 3.75"
35-90
67
9" x 10" x 3.75"
35-90
105
9" x 10" x 3.75"

ACCESSORIES

Description
Preset Universal EFI Sump Fuel Kit
Preset Universal EFI Sump Fuel Kit
Replacement Preset Universal EFI Sump Fuel Tank Only
Adjustable Universal EFI Sump Fuel Kit
Adjustable Universal EFI Sump Fuel Kit
Replacement Adjustable Universal EFI Sump Fuel Tank Only
Replacement Adjustable Universal EFI Sump Fuel Tank Only

CRATE ENGINES

Wiring Harness
Connection

EFI

High Pressure Fuel

Outlet to Fuel Rail

SUPERCHARGERS

Low Pressure Fuel

Inlet from Fuel Pump

These Universal Sump Fuel Kits are designed to provide the necessary high fuel pressure required for
EFI applications in vehicles equipped with an existing low pressure carbureted fuel system. They are
a complete self-contained system that can be easily installed under the hood. The unique design of these
systems allows them to deliver a constant fuel pressure with no fuel return line, fuel pressure regulator
or fuel tank modifications. They are compatible with the existing factory fuel tank and pump. They are
ideal for use with various aftermarket EFI systems and with many popular engine swap applications
that require constant fuel pressure.
Kits #3605/#3607 are preset and rated for engines up to 600 HP, when used with an E-Street 1 EFI system
or other aftermarket EFI system. Our Adjustable Fuel Sump Kits #36031/#36033 feature a new compact
design that is adjustable from 35 to 90 psi and includes a vacuum reference port. They are available in
67 and 105 gph flow rates and can support up to 750 HP. Each complete kit includes a durable molded,
lightweight plastic fuel sump tank with high pressure fuel pump installed, wiring harness, universal
mounting brackets, hose, fittings and all of the necessary hardware for installation. These kits are the
most affordable way to make your fuel system EFI ready.

POWER PACKAGES KITS

This kit includes everything needed to upgrade a carbureted fuel system to a high pressure EFI system,
excluding the fuel tank. This kit is a return-style and will complete the fuel system loop by returning
unused fuel to the tank. Kit includes a 60 psi fuel pump, adjustable regulator, filter, Russell Twist-Lok hose,
hose ends, mounting brackets and hardware. A baffled fuel tank is recommend to prevent fuel starvation.
This system is rated for engines up to 600 HP, when used with an E-Street EFI system.
Return-Style Fuel Kit for E-Street or Equivalent EFI system.................................................................#3604

CAMSHAFT & VALVETRAIN

Fuel Kit Options

MANIFOLDS GASKETS CYLINDER HEADS

WHICH FUEL KIT IS BEST FOR MY INSTALLATION?

CARBURETORS

FOR AMC & JEEP 304-401

Edelbrock Pro-Flo 2 EFI system for AMC and Jeep is ideal for high performance street machines as well
as Jeep owners who will love the all-weather, all-altitude performance of multi-point fuel injection.
Our EFI is not affected by extreme inclines or angles. You get excellent throttle response throughout
the rpm range and great fuel economy with incredible power. Each system includes a distributor
for a complete install.

Pro-Flo 2 EFI System #35300

Description
1967-69 AMC 343, 390 c.i.d. engines up to 450 HP (29 lb/hr injectors)
1970-91 AMC/Jeep 304-401 c.i.d. engines up to 450 HP (29 lb/hr injectors)

Emissions
Codes
Satin Polished
l
#35300

l
#35310 #353101

Installation Notes: Recommended intake gasket: Edelbrock #7213. Manifold height: A-4.45", B-5.77", air valve height: 2.25"
(see page 81 for manifold reference dimensions).

FOR BIG-BLOCK CHEVROLET

These systems are designed specifically to convert your carbureted 1965-later big-block Chevy with oval
or rectangular port cylinder heads to sequential multi-point fuel injection. Our fuel-efficient EFI systems
deliver superior performance and the potential for improved mileage. They are ideal for street highperformance 454-502 inch GM crate engines. Compatible with Edelbrock or factory cylinder heads. Fuel
pump and fuel lines are not included with systems #35520, #35530 and #35540. Edelbrock offers a variety
of in-line fuel pumps to choose from, based on your engines fuel demand.
Pro-Flo 2 EFI System #35510

SUPERCHARGERS

KITS POWER PACKAGES

PRO-FLO 2

PRO-FLO 2

CAMSHAFT & VALVETRAIN

CYLINDER HEADS GASKETS MANIFOLDS

EFI SYSTEMS

Deck Port Emissions

Description
Height Style Codes
Satin Polished
ll
#35510 #355101
1965-86 Big-Block Chevy Up to 450 HP (29 lb/hr injectors)
9.8" Oval
ll
#35500 #355001
1965-86 Big-Block Chevy Up to 650 HP (44 lb/hr injectors)
9.8" Oval

Big-Block Chevy with 4150 Flange up to 850 HP (60 lb/hr injectors) 9.8" Rect lll #35520

Big-Block Chevy with 4500 Flange up to 850 HP (60 lb/hr injectors) 9.8" Rect lll #35530

Big-Block Chevy with 4500 Flange up to 850 HP (60 lb/hr injectors) 10.2" Rect lll #35540

Pro-Flo 2 EFI System #35520

Edelbrock core products

are manufactured
in the USA for
unsurpassed quality.
Edelbrock/Musi 555 EFI Crate Engine #46550,
installed on Vics 1967 Chevelle which has
participated in many Hot Rod Power Tours

FOR S/B & B/B CHRYSLER

Pro-Flo 2 EFI System #35260

INDEX

SPORTSWEAR

FUEL PUMPS

NITROUS

ACCESSORIES

WATER PUMPS

CRATE ENGINES

EFI

Installation Notes: Recommended intake gasket oval port applications: Edelbrock #7203, for rectangular port applications
use: Edelbrock #7202. Manifold height for #35510, #355101, #35500, #355001: A-5.50", B-6.75", air valve height: 2.25". Fuel
pump not included in rectangular port systems #35500, #35530 and #35540. Rectangular port systems manifold height:
A-5.90", B-5.90". Air valve height: #35520 2.52", #35530 and #35540 3.25" (see page 81 for manifold reference dimensions).

These systems includes everything you need to convert a carbureted small-block Chrysler 340/360 or 318
with 340/360 heads or 413-426 Wedge-440 big-block Chrysler to electronic fuel injection. Our multi-point
electronic fuel injection systems deliver superior throttle response throughout the rpm range, great fuel
economy with incredible horsepower, smooth engine operation and improved cold starting. System #35260
can be upgraded with larger injectors for higher horsepower applications, while systems #35090/#35080
are available with two injector sizes to handle different power requirements.
Description
Small-Block Chrysler 318-360 up to 450 HP (29 lb/hr injectors)
Big-Block Chrysler 413-440 up to 450 HP (29 lbs/hr injectors)
Big-Block Chrysler 413-440 up to 550 HP (35 lbs/hr injectors)

Pro-Flo 2 EFI System #35090

163

Emissions
Code
l
l
l

Satin Black
#35260

#35090

#35080

Installation Notes: Recommended intake gasket #35260: Edelbrock #7276. Manifold height for #35260: A-5.78", B-6.78",
air valve height: 2.25". Recommended intake gasket #35090/#35080: Edelbrock #7225 (use with OE valley pan). Manifold
height for #35090/#35080: A-4.80", B-5.80", air valve height: 2.25" (see page 81 for manifold reference dimensions).

WWW.EDELBROCK.COM

CARBURETORS

PRO-FLO 2 & PROFLO XT EFI

SYSTEMS

FOR S/B FORD 289-302 & 351W

These systems are designed for 1964-95 small-block Ford 289-302 or 351W engine with factory or
Edelbrock heads. They offer excellent throttle response throughout the rpm range, great fuel economy,
smooth engine operation and improved cold starting. The included injectors can be upgraded for higher
horsepower applications. Includes a distributor for a complete installation.

Pro-Flo 2 EFI System #35210

Emissions
Codes
Satin Polished
ll
#35210 #352101
ll
#35410 #354101

Description
289-302 S/B Fords up to 450 HP (29 lb/hr injectors)
351W S/B Fords up to 450 HP (29 lb/hr injectors)

FOR FORD FE 390-428

These EFI Systems are designed to convert 1961-76 big-block Ford 390-428 engines to fully sequential,
electronic fuel injection. Get improved throttle response throughout the rpm range, smooth engine
operation and improved cold starting. These kits include a distributor for a complete installation.

Installation Notes: Recommended intake gasket: Edelbrock #7224. Manifold height: A-6.49", B-6.49", air valve height: 2.25"
(see page 81 for manifold reference dimensions).

FOR PONTIAC 326-455

Emissions
Codes
Satin
ll
#35560
ll
#35550

Description
Pontiac 326-455 c.i.d. V8 up to 450 HP (29 lb/hr injectors)
Pontiac 326-455 c.i.d. V8 up to 650 HP (44 lb/hr injectors)

Installation Notes: Recommended intake gasket: Edelbrock #7280. Manifold height: A-6.03", B-7.15", air valve height: 2.25"
(see page 81 for manifold reference dimensions).

FOR BIG-BLOCK CHEVROLET

Pro-Flo XT System #35583

Deck Emissions
Height
Codes
Satin Black
lll
#3558 #35583
9.8"
lll
#3569 #35693
9.8"
lll
#3559 #3559
9.8"

Installation Notes: Recommended intake gasket: Edelbrock #7202. Manifold height: A-9.8", B-10.0", C-17.8", D-0.0", E-10
(see page 81 for manifold reference dimensions).

Pro-Flo XT System #3544

Emissions
Codes
Satin Black
ll
#3544 #35443
ll
#3545 #35453

Installation Notes: Recommended intake gasket: Edelbrock #7225 (use with OE valley pan). Manifold height: A-9.7",
B-9.6", C-15.9", D-4.0", E-15 (see page 81 for manifold reference dimensions).

EMISSIONS GUIDE

PLEASE REFER TO PAGE 212 FOR MORE INFORMATION REGARDING THE EMISSIONS GUIDE.

164

INDEX

l 50-STATE LEGAL l RACING ONLY l PRE-POLLUTION CONTROLLED VEHICLES l STOCK REPLACEMENT l ENGINE SWAP

SPORTSWEAR

Description
Big-Block Chrysler 413-440 up to 550 HP (35 lbs/hr injectors)
Big-Block Chrysler 413-440 up to 650 HP (44 lbs/hr injectors)

FUEL PUMPS

These systems are designed specifically for 413-426 Wedge and 1961-79 440 big-block Chryslers. Our fuelefficient multi-point electronic fuel injection systems deliver superior performance and the potential for
improved mileage. They include a distributor for a complete install. For non-emission engines.

NITROUS

FOR B/B CHRYSLER

ACCESSORIES

Description
Big-Block Chevrolet Up to 550 HP (35 lb/hr injectors)
Big-Block Chevrolet Up to 650 HP (44 lb/hr injectors)
Big-Block Chevrolet Up to 850 HP (60 lb/hr injectors)

WATER PUMPS

These systems convert your 1965 & Later Mark VI and GEN V/VI rectangle-port big-block Chevy to the
powerful Edelbrock Pro-Flo XT EFI. Ideal for street high-performance big-block applications with rectangle
port heads, including GM crate engines. Compatible with Edelbrock or factory large rectangle port heads.
Systems #3559 and #35593 do not include a fuel pump, filter and lines but are supplied with high capacity
Fuel Pressure Regulator #1729. For non-emission engines.

CRATE ENGINES

PRO-FLO XT

EFI

Pro-Flo 2 EFI System #35210

SUPERCHARGERS

These systems are designed specifically for 1965-79 Pontiac 326-455 engines. Our fully sequential electronic
fuel injection systems deliver superior performance and improved mileage potential. Each system includes a
distributor for a complete install. Will not fit Ram Air V and 265/301 V8's or under Trans Am Shaker Hood.

POWER PACKAGES KITS

Pro-Flo 2 EFI System #35420

Emissions
Codes
Satin
l
#35420
l
#35430

Description
390-428 B/B Ford FE up to 450 HP (29 lb/hr injectors)
390-428 B/B Ford FE up to 650 HP (44 lb/hr injectors)

CAMSHAFT & VALVETRAIN

Installation Notes: Recommended intake gasket: Edelbrock #7220. Kit #35210 is supplied with a distributor for roller camshaft
applications. Flat tappet camshaft applications will require the use of an iron distributor gear, MSD #85852. Manifold height:
#35210 A-5.76", B-5.76"; #35410 A-5.75", B-5.75", air valve height: 2.25" (see page 81 for manifold reference dimensions).

MANIFOLDS GASKETS CYLINDER HEADS

PRO-FLO 2

CARBURETORS
CYLINDER HEADS GASKETS MANIFOLDS

EDELBROCK THROTTLE BODIES

Each throttle body is precision machined and assembled,

by Edelbrock, with the finest OE quality components

Edelbrock throttle
bodies are engineered,
cast, machined and
assembled in the USA

These 90mm single bore throttle bodies are designed specifically for use with our Pro-Flo XT EFI manifolds
and Victor EFI intake elbows. They are ideal for high performance street, race and custom EFI system
installations. Available satin, polished or black powder coat finish. Universal Pro-Flo XT Throttle Bodies
have provisions for either LS1 or LS2 mounting bolt patterns. They use a LS1 style TPS and 4-wire stepper
motor IAC. They include an idle bleed screw to offer better idle control than other 90mm throttle bodies
on the market. The bleed screw can be used to create a base amount of idle air flow instead of using
throttle tip-in, leaving the TPS signal unaffected. Features a 4.5" diameter inlet flange and is ideal for use
with Edelbrock Pro-Flo XT intake manifolds #7136, #71363, #7137, #71373, #7139, #71393, #7144 and #71443.
Small-block Ford Pro-Flo XT throttle bodies are for use with our Intake Elbows or Pro-Flo XT intake
manifolds #7128 and #71283. Includes a Ford style TPS and provisions for a Ford style IAC motor, OEM or
Edelbrock #36017. Uses a standard Ford 5.0L mounting bolt pattern and has a 4.0" diameter inlet flange.

SUPERCHARGERS
EFI

Pro-Flo XT Throttle Body #3869

CRATE ENGINES
WATER PUMPS

Throttle Emissions
CFM Bore Size
Code
ll
1100 90mm
ll
1100 90mm

Satin Polished Black

#3869 #38691 #38693
#3818

#38183

1986-95 5.0L MUSTANGS

These throttle bodies are 50-state street legal (E.O. Number D-215-75) replacements for late-model 5.0L
Ford Mustangs. The 65mm size is ideal for stock manifolds, while the 70mm size is ideal for use with our
Performer 5.0/Performer RPM 5.0 intake manifolds and The Total Power Package. The 70mm gained 10
hp over stock throttle body. The 75mm is ideal for more radical applications and requires port matching
to fit most manifolds. Our 1986-93 throttle bodies must be used with matching EGR Plates. Gaskets are
included. Our throttle body spacers/adapters are designed to adapted our 70mm and 75mm throttle bodies
to a wide variety of applications. They are 1/2" thick and will require intake port matching.
Throttle Body/EGR Plate #3825/#3828

ACCESSORIES
NITROUS

Description
Universal Pro-Flo XT Throttle Body
Small-Block Ford Pro-Flo XT Throttle Body

FORD

Throttle Body Spacer/Adapter #38112

Emissions
Code
65mm
#3824
l
1986-93 Mustang Throttle Body and EGR Plate
#3827
l

1994-95 Mustang Throttle Body Only (Must use adapter #3835)

l
Spacer/Adapter for Honda and Acura

Universal Spacer/Adapter (undrilled)

Replacement Gasket Sets
N/A
#3830
Description

70mm
#3825
#3828
#3845
#38112
#38113
#3830

75mm
#3826
#3829

#38122
#38123
#3831

1994-95 MUSTANG THROTTLE BODY ADAPTER

This adapter is required to install Edelbrock 5.0L intake manifolds #3821/#7123 on 1994-95 Mustangs. It
must be used with Edelbrock 65mm, 70mm or stock throttle bodies. Available in titanium gray and black
powder-coated finish to match the Performer 5.0L and Performer RPM II 5.0L intake manifolds.

FUEL PUMPS
SPORTSWEAR
INDEX

Our throttle bodies are engineered and manufactured with

Edelbrock throttle
larger than stock smooth throttle bore to deliver more
bodies include all
air for increased performance. They are cast in our ultrahardware for
modern foundry in San Jacinto, California. Each casting is
a complete
then precision machined and assembled with the finest OE installation
quality components. The throttle blade is securely staked
to the throttle shaft to ensure a secure fit and finish and
the throttle shaft rides on sealed ball bearings for smooth,
safe operation. Most applications include a new throttle
position sensor (TPS) that is pre-installed and electronically
calibrated by sophisticated equipment for an easy bolt-on
installation. Our throttle bodies are available in several sizes to suit your application. Smaller sizes
are slightly larger than stock and are a great first step for stock or mildly modified engines, while
larger sizes are for more radical engine combinations, and in most cases, require port matching of the
manifold for proper fit. These high-quality Edelbrock throttle bodies bolt to the stock manifolds with
mounts for stock sensors and vacuum lines, however some applications may require port-matching.

PRO-FLO XT

KITS POWER PACKAGES

CAMSHAFT & VALVETRAIN

THROTTLE BODIES

Throttle Body Adapter #38353

165

Description
Throttle Body Adapter for Edelbrock Manifolds #3821 & #7126
EGR Supply Tube Spacer for #7123 (use with #3835 or #38353)

Emissions
Code
l
l

Grey
#3835
#8025

Black
#38353
#8025

WWW.EDELBROCK.COM

CARBURETORS

THROTTLE BODIES
LS1 SERIES

Designed to fit factory plenum with no modifications. They are cast, fully machined, and assembled by
Edelbrock using all new components including a pre-set TPS and an idle air bypass solenoid. Extra idle
control is provided with the addition of an idle bleed screw. 50-state street legal E.O. Number D-215-75.
Year
1998-99
2000-02
2004

Throttle Emissions
Bore Size
Code
Satin
l
#3867
80mm
l
#3868
80mm
l
#3868
80mm

Model
Camaro & Firebird
Camaro & Firebird
Pontiac GTO

Designed for modified Gen III-IV engines, the Victor LS Series 90mm throttle bodies increase flow and
horsepower in high-performance street or competition applications. Throttle bodies #3864/#38643 include
a LS1 stock-style TPS and IAC. Throttle body #386403 does not include the TPS and IAC. Extra idle control
is provided with the addition of an idle bleed screw. They have an LS1/LS2 flange that can be mounted on
aftermarket LS1 manifolds with a 90mm opening as well as LS2/LS7 factory manifolds. They do not retain
the lower water tube and are perfect for enthusiasts who want to use an LS2 or LS7 in an older vehicle
with no fly-by-wire throttle.

LS Series 90mm
Throttle Body
#38643

Description
Victor LS Series Throttle Body with TPS & IAC
Victor LS Series Throttle Body without TPS & IAC

HONDA/ACURA

These progressive 4-barrel throttle bodies bolt directly to standard square-bore or 4500 Series carb mount
flanges for competition electronic fuel injection systems based on our Victor Series manifolds. Fully
machined by Edelbrock and include a GM style throttle position sensor (TPS). They are available with and
without an idle air control (IAC) motor. Will fit standard style air cleaners (5-1/8" or 4500 series). Available
in standard finish or black powder coated.

4500

1600

2.00"

ll

#3862

4500

2000

2.25"

ll

#38633

Black
#3978
#3979
#3988

Installation Note: It may be necessary to plenum match the carb flange of the intake manifold to eliminate a positive step
created by the oversized bores of throttle body #3888, #3988 or #38633. #38783 includes a Hitachi (PWM) IAC motor (two wire).

EMISSIONS GUIDE

PLEASE REFER TO PAGE 212 FOR MORE INFORMATION REGARDING THE EMISSIONS GUIDE.

166

INDEX

l 50-STATE LEGAL l RACING ONLY l PRE-POLLUTION CONTROLLED VEHICLES l STOCK REPLACEMENT l ENGINE SWAP

SPORTSWEAR

CFM
1000
1600
2000
1000

FUEL PUMPS

Throttle
Bore Emissions
Size
Code
Satin
ll
#3878
1.75"
ll
#3879
2.00"
ll
#3888
2.25"
ll
#38783
1.75"

NITROUS

Description
Universal 4-Barrel with Delphia/GM IAC Motor
Universal 4-Barrel with Delphia/GM IAC Motor
Universal 4-Barrel with Delphia/GM IAC Motor
Universal 4-Barrel with Hitachi Linear IAC Motor
Universal 4-Barrel without IAC Motor
(Accepts GM/Delphi IAC motor only)
Universal 4-Barrel without IAC Motor
(Accepts MotoTron IAC motor only)

Carb
Flange
Type
4150
4500
4500
4150

ACCESSORIES

1000 cfm
Universal
Throttle Body
#3878

UNIVERSAL 4-BARREL

WATER PUMPS

Throttle Body
#4789

CRATE ENGINES

Throttle Emissions
Engine
Bore Size
Code
Satin
l
#4790
1.8L (B18C)
65mm
l
#4789
1.8L (B18C5) 65mm

Year Model
1994-01 Acura Integra GSR
1996-01 Acura Type R Integra

EFI

These direct bolt-on throttle bodies come complete with a new throttle position sensor and have mounts
for the stock manifold sensors and vacuum lines. They feature a bore area thats 18% larger than stock
for increased performance. The large bore area is capable of enough airflow to support alcohol and
turbocharged engines making upwards of 800 hp. 50-state street legal E.O. Number D-215-48.

SUPERCHARGERS

Edelbrock throttle
bodies are engineered,
cast, machined and
assembled in the USA

POWER PACKAGES KITS

Throttle
Bore Emissions
CFM Size
Code
Satin Black
ll
#3864 #38643
1100 90mm
ll
#38640 #386403
1100 90mm

CAMSHAFT & VALVETRAIN

VICTOR LS SERIES

LS1 Throttle
Body #3868

MANIFOLDS GASKETS CYLINDER HEADS

GM

CARBURETORS

INTAKE ELBOWS

CYLINDER HEADS GASKETS MANIFOLDS

THROTTLE BODY INTAKE ELBOWS

DESIGNED FOR LS SERIES AND 5.0L THROTTLE BODIES

Ultra Low Profile Intake

Elbow #3847

LOW & ULTRA LOW PROFILE ELBOWS

CAMSHAFT & VALVETRAIN

Ultra Low Profile Elbow #3847 is designed to fit our Victor Jr. LS1 EFI manifold #29085 and is ideal
for tight engine compartments. The throttle bore center sits 9.00" forward and only 0.56" up from the
manifold mounting flange. Includes throttle body adapter plate #2737 for use with LS1 throttle bodies.
We recommend Edelbrock 90mm throttle body #3869 for optimum performance. Low Profile Elbow #3848
has a throttle body bore center 7.00" forward and 2.00" above the manifold flange. Designed for use with
Edelbrock Pro-Flo XT throttle bodies #3869/#38693/#3818/#38183, GM and Ford 90mm throttle bodies.

KITS POWER PACKAGES

Low Profile Intake

Elbow #3848

Installation Note: Use of an LS1 Throttle Body will require Edelbrock Throttle Body Adapter Plate #2737.

These elbows are designed for use in high hp race applications. An internal divider optimizes flow
distribution to all ports of the manifold by reducing turbulence. High Flow Elbow #3849 is an ultra high flow
version which measures 4.50" from flange to throttle body centerline (7.75" overall height). During flow
testing this elbow provided up to 1,050 cfm with a 90mm throttle body and 1,150 cfm with a 95mm throttle
body. Does not accept LS1 throttle bodies. Intake Elbow #3814 has a universal bolt pattern and is the best
way to adapt a single throttle body to a Dominator 4500 style flange EFI manifold without sacrificing air
flow. The throttle body flange accepts 90-95mm LS1, LS2 and Ford 5.0L based throttle bodies.
Intake Elbow #3815 is also engineered for use on a Dominator 4500 style flange manifold. It has a 120mm
opening for maximum flow and is capable of over 1,400 naturally aspirated hp. The throttle body flange uses
a 4.250" square bolt pattern. This elbow flows 1,800 cfm @ 20.5 in H2O. Includes a universal throttle bracket.

SUPERCHARGERS
EFI

Throttle Emissions
Body Size
Code
Satin Black
l
#3847 #38473
up to 90mm
l
#3848 #38483
up to 90mm

Description
Ultra Low Profile Intake Elbow
Low Profile Intake Elbow

HIGH FLOW ELBOWS

High Flow Intake

Elbow #38493

Throttle Emissions
Body Size
Code
Satin Black
l
#3849 #38493
up to 90mm
l
#3814 #38143
up to 95mm
l
#3815 #38153
up to 120mm

Description
High Flow Intake Elbow
High Flow Intake Elbow for 4500 Flange
High Flow Intake Elbow for 4500 Flange

INTAKE ELBOW DIMENSIONS

WATER PUMPS

CRATE ENGINES

These elbows were developed by the Edelbrock engineering team using the latest in Computational Fluid
Dynamic (CFD) software. Edelbrock Throttle Body Elbows are the best way to adapt LS1, LS2 and Ford
5.0L-based throttle bodies to EFI manifolds with traditional square-bore mounting pads. An internal divider
optimizes flow quantity and distribution into the manifold and they can be mounted forward, backward, or
sideways on Victor EFI square-bore manifolds. Three versions allow EFI tuners to position the throttle body
low for hood clearance or higher for maximum airflow. Available in satin or black powder coated finish.
All Edelbrock Throttle Body Elbows include a universal throttle cable bracket.

Length

Bore Overall Throttle Body

Length Centerline Height Flange Angle

An internal divider optimizes

flow quantity and distribution
into the manifold

Part No.
8.0"
#3814
8.0"
#3815
#3847, #38473 9.0"
#3848, #38483 7.0"
#3849, #38493 5.50"

6.0"
6.0"
0.56"
2.0"
4.5"

8.86"
8.86"
3.62"
5.04"
7.75"

100
100
102
95
90

Throttle Body
Flange Angle

Bore
Centerline

NITROUS

ACCESSORIES

STREET & COMPETITION

INDEX

SPORTSWEAR

FUEL PUMPS

Edelbrock manifolds
are manufactured
in the USA for
unsurpassed quality.

THROTTLE BODY ADAPTER & GASKET

Throttle Body Adapter #2737

167

Throttle Body Adapter for LS1 Throttle Body to EFI Elbow ..................................................................#2737
Throttle Body Flange Gasket (for 90mm throttle bodies #3847, #38473, #3848 & #38483) ..................#3813

WWW.EDELBROCK.COM

CARBURETORS

MANIFOLDS EFI

SYSTEMS

VICTOR AND SUPER VICTOR INTAKES

These EFI intake manifolds make it easier to convert to electronic fuel injection for high performance
engines. Injector bosses have been precisely positioned and machined for excellent fuel spray patterns and
maximum power. Universal 4-barrel throttle bodies, intake elbows, fuel rails, fuel injectors, fuel pumps and
regulators are available separately to complete your competition EFI system.
#29785

WATER PUMPS
ACCESSORIES
NITROUS
FUEL PUMPS

#29245

INDEX

168

SPORTSWEAR

#29545

l 50-STATE LEGAL l RACING ONLY l PRE-POLLUTION CONTROLLED VEHICLES l STOCK REPLACEMENT l ENGINE SWAP
PLEASE REFER TO PAGE 212 FOR MORE INFORMATION REGARDING THE EMISSIONS GUIDE.

CRATE ENGINES

EMISSIONS GUIDE

EFI

#2937

Edelbrock manifolds
are manufactured
in the USA for
unsurpassed quality.

SUPERCHARGERS

#28155

POWER PACKAGES KITS

#70855

CAMSHAFT & VALVETRAIN

#28455

SMALL-BLOCK CHEVY
Page No.
Victor E 23 EFI ...................................................................................................................................................40
Victor E-Tec EFI for E-Tec/Vortec Heads ......................................................................................................42
Super Victor EFI for E-Tec/Vortec Heads ......................................................................................................42
CHEVY LS1
Victor Jr. LS1/LS2 Competition EFI Intake Manifold Only ...........................................................................44
Super Victor LS1/LS2 EFI Manifold .................................................................................................................44
Super Victor LS3 Manifold EFI for 4500 Style Throttle Bodies...................................................................45
Super Victor LS3 Manifold EFI for 4150 Style Throttle Bodies...................................................................45
Victor Jr. LS Series Gen IV EFI Manifold for L92 Heads .............................................................................46
BIG-BLOCK CHEVY
Victor Jr. 454-R EFI ............................................................................................................................................50
Victor Jr. 454-O EFI ............................................................................................................................................50
Victor Tunnel Ram Base Only for EFI Applications......................................................................................51
Super Victor BBC EFI ........................................................................................................................................52
Super Victor BBC EFI Tall-Deck ......................................................................................................................52
Big Victor Spread-Port for Edelbrock Big Victor, Profiler Raptor & Big Chief 9.8" ...............................53
Big Victor Spread-Port for Edelbrock Big Victor, Profiler Raptor & Big Chief 10.2" .............................53
Big Victor Spread-Port for Brodix Big Duke heads 9.8" .............................................................................53
Big Victor Spread-Port for Brodix Big Duke heads 10.2" ...........................................................................53
Big Victor HV EFI for Edelbrock, Brodix & Dart Heads 9.8" .......................................................................54
Big Victor HV EFI for Edelbrock, Brodix & Dart Heads 10.2" .....................................................................54
SMALL-BLOCK CHRYSLER
Super Victor Small-Block Chrysler EFI (non-EGR) ......................................................................................56
BIG-BLOCK CHRYSLER
Victor 440 EFI (non-EGR) ..................................................................................................................................59
Victor 426-572 HEMI EFI (non-EGR) ...............................................................................................................59
SMALL-BLOCK FORD
Super Victor EFI for 8.2 (non-EGR) .................................................................................................................63
Super Victor EFI for 351W (9.5" deck) ..........................................................................................................68
FORD 4.6L
Victor Jr. Ford 4.6L SOHC EFI Manifold Only ................................................................................................71
FORD FE
Victor FE EFI (for standard square-bore throttle bodies) ..........................................................................72
BIG-BLOCK FORD
Victor Ford 460 EFI (non-EGR) .........................................................................................................................74
PONTIAC
Torker II EFI Pontiac (non-EGR) .....................................................................................................................78
Torker II EFI Pontiac Polished (non-EGR) .....................................................................................................78
Super Victor EFI Pontiac (based on #2956) ...................................................................................................78
Super Victor EFI Pontiac (based on #2957) ...................................................................................................78

MANIFOLDS GASKETS CYLINDER HEADS

EDELBROCK EFI MANIFOLDS

CARBURETORS

EFI COMPONENTS
FOR PRO-FLO 2, PRO-FLO XT,
PRO-FLO XT-R FUEL INJECTION SYSTEMS

This Edelbrock Wide Band Air/Fuel Ratio interface unit will not only work with all current Edelbrock EFI
systems, but with any aftermarket EFI system that can accept a 0-5 volt input for monitoring Air Fuel Ratios.
Features two independent 0-5V analog outputs that are linearly scaled with 0V=10.0 AFR and 5V=20.0 AFR.
Includes interface unit, sensor, weld-in bungs and all necessary wiring. Does not have internal data logging
capability and only includes a single oxygen sensor. For data acquisition applications requiring two oxygen
sensors, use Dual Channel Wide Band kit #91170.

2 Channel Wide Band Air/Fuel Ratio Interface #3532

Allows improved Closed Loop control of the current Pro-Flo EFI systems
Suitable for automotive, motorcycle, and other 4-Stroke engine applications
Highly accurate with less than 0.10 AFR error over 10.3 - 19.5 AFR range
Easy free-air calibration procedure corrects for sensor aging effects
0-5V analog AFR output for interface to EFI, Data or Dyno instrumentation
Wide supply voltage range from 11-18V allows operation from battery
on small engines or race vehicles with out an alternator
Current draw is approx. 1 amp
Features compact 4" x 2" x 0.5" water-proof enclosure
Wide Band Air/Fuel Ratio Interface .........................................................................................................#3532
Dual Channel Wide Band Amplifier Kit ...................................................................................................#91170

WIDE BAND OXYGEN SENSOR

This Wide Band Oxygen Sensor is a replacement sensor for our Wide Band Interface Kits.
Sensor is complete with special Deutsch connector for direct replacement.
Wide Band Oxygen Sensor ........................................................................................................................#91171

Wide Band O2
Sensor #91171

WIDE BAND OXYGEN SENSOR CABLE EXTENSION

SUPERCHARGERS

KITS POWER PACKAGES

CAMSHAFT & VALVETRAIN

CYLINDER HEADS GASKETS MANIFOLDS

WIDE BAND AIR/FUEL RATIO KIT

EFI

This extension cable measures 12 feet in length and is designed for extending the Edelbrock O2 Sensor
#91171 to the Edelbrock Wide Band Sensor Harness. It is provided with the connector terminated on
one end only, allowing for the cable length to be tailored to custom applications. It can then be
terminated with the provided connector.
Wide Band Oxygen Sensor Cable Extension (12 ft.) ..............................................................................#91173

OXYGEN SENSOR WELD-ON BUNG

This Weld-On Bung can be used with Edelbrock QwikData 2, Pro-Flo 2, Pro-Flo XT or any application
requiring an Oxygen Sensor installed in the Exhaust system. Its manufactured from steel stock and
has 18 x 1.5mm internal threads.
02 Sensor Weld-On Bung ............................................................................................................................#91172

INDEX

SPORTSWEAR

FUEL PUMPS

NITROUS

ACCESSORIES

WATER PUMPS

CRATE ENGINES

O2 Sensor Weld-On
Bung #91172

Protect your investment with

Edelbrock Performance Lubricants!
Break-In Oil - Contains a blend of
hydro-processed petroleum base stocks
and additives that is ideal for preparing
metal surfaces for new and rebuilt engines.

Zinc Additive - Features a special formula

with the ideal chemistry to add wear protection
to any motor oil and extend engine life.

See page 126 for more information.

169

Multi-Coil Driver #3572

LS1 engine with Edelbrock Pro-Flo XT intake manifold,

E-CNC cylinder heads, 90mm throttle body, multi-coil driver,
coil covers, water pump, valley plate and timing cover

MULTI-COIL DRIVER

FOR EDELBROCK EFI SYSTEMS

The 3572 is a multiple coil driver box that interfaces with the Pro-Flo 2, Pro-Flo XT, Pro-Flo Sportsman
and Pro-Flo XT-R engine management kits when using coil-on-plug ignitions systems. This product is
for use with ignitor-type coils only, such as the GM LS series coils, and Edelbrock Pro-Flo 2, Pro-Flo XT,
Pro-Flo Sportsman and Pro-Flo XT-R engine management systems.
Multi Coil Driver for Coil On Plug Ignition ll .....................................................................................#3572

WWW.EDELBROCK.COM

CARBURETORS

EFI COMPONENTS
Pro-Flo 2 & Pro-Flo XT l.............................................................................................................................#91157
Pro-Flo XT-R l..............................................................................................................................................#3556

MANIFOLDS GASKETS CYLINDER HEADS

ENGINE CONTROL UNITS

FUEL INJECTORS Single

Set of 4 Set of 8

#3687

#3574

#3853

#91147

ELECTRONICS

Calibration Module for use with Pro-Flo 2 and Pro-Flo XT Systems..................................................#35360

Calibration Module for use with original Pro-Flo Systems..................................................................#3519
Calibration Module Cord & Adapter for Pro-Flo 2 and Pro-Flo XT Systems......................................#35370
Calibration Module Cord & Adapter for original Pro-Flo Systems......................................................#3571
USB to Serial Converter...............................................................................................................................#91147
30 AMP Harness Power Relay (12 volt, for Pro-Flo 2 systems only)......................................................#36014
Pro-Flo Ignition Amplifier (for Pro-Flo systems)..........................................................................................#3518
Distributor Short Body (for S/B Ford 289-302 Pro-Flo XT systems)........................................................#3617

SENSORS

#35360

#36018

#3588

#36013

#36015

THROTTLE BRACKET
#3594

#3596

Throttle & Trans Kickdown for 4150 Style Pro-Flo 3 Throttle Body....................................................#8041

EMISSIONS GUIDE

PLEASE REFER TO PAGE 212 FOR MORE INFORMATION REGARDING THE EMISSIONS GUIDE.

170

INDEX

l 50-STATE LEGAL l RACING ONLY l PRE-POLLUTION CONTROLLED VEHICLES l STOCK REPLACEMENT l ENGINE SWAP

SPORTSWEAR

Replacement 2V Air Valve Gasket (for Pro-Flo 2 systems #35030)........................................................#3894

Replacement 4V Air Valve Gasket (for Pro-Flo 2 systems #3500 & #3550)...........................................#3895
Replacement Throttle Body Flange Gasket (for 90mm throttle body)..................................................#3813

FUEL PUMPS

GASKETS

NITROUS

#1794

Fuel Pump 57 gph @ 45 psi, 3/8" hose barb inlet/outlet............................................................................#3594

Fuel Pump 80 gph @ 45 psi, -10 AN inlet/outlet.........................................................................................#1790
Fuel Pump 120 gph @ 45 psi, -12 AN inlet/outlet.......................................................................................#1794
Fuel Pump for MPFI 57 gph @ 45 psi..........................................................................................................#3581
EFI Pump relay...............................................................................................................................................#3586
Fuel Filter........................................................................................................................................................#3596
Regulator Fitting (-6 AN for Pro-Flo 2 and Pro-Flo XT systems).............................................................#3577
Fuel Pressure Regulator (-6 AN inlet/outlet/bypass)...............................................................................#1728
Fuel Pressure Regulator (-10 AN inlet/outlet -6 AN bypass)..................................................................#1729
Fuel Pressure Regulator (for Pro-Flo 2 and Pro-Flo XT systems)...........................................................#3584
Fuel Pressure Regulator (for Performer MPFI kits).................................................................................#3595

ACCESSORIES

#1790

#1728

FUEL DELIVERY

WATER PUMPS

GM Stepper IAC Motor.................................................................................................................................#36015

PWM Idle Air Motor and Gasket (Hitachi)................................................................................................#36017
Idle Air Motor (for Magneti Marelli Throttle Bodies)...............................................................................#3599
#36017

#3599

IDLE MOTORS

CRATE ENGINES

#36019
#3587

EFI

#3578

SUPERCHARGERS

#3589

Throttle Position Sensor (clockwise rotation, GM type).........................................................................#36018

Throttle Position Sensor (for Pro-Flo and Pro-Flo 2 systems)................................................................#3582
Coolant Temp Sensor....................................................................................................................................#3589
Coolant Temp Sensor (for Pro-Flo and E-Street systems).......................................................................#36012
Air Temp Sensor (for push-in connections)...............................................................................................#3578
Air Temp Sensor (3/8"-18 NPT thread)........................................................................................................#3588
MAP Sensor (for first generation Pro-Flo systems)..................................................................................#3587
MAP Sensor 1 Bar (for Pro-Flo 2 systems)................................................................................................#36019
MAP Sensor 2 Bar (for Pro-Flo 2 systems)................................................................................................#36020
Oxygen Sensor (narrow band, 4-wire)........................................................................................................#36013
Wide Band Oxygen Sensor (for the Pro-Flo Sportsman systems).......................................................#36010
Pro-Flo 3 Fuel Sensor (1/8"-27 NPT)...........................................................................................................#3546
EFI PCV Valve.................................................................................................................................................#3592
PCV Valve Fitting...........................................................................................................................................#3593

POWER PACKAGES KITS

#3617

Fuel Injector 60 lb/hr @ 43 psi; 85 lb/hr @ 87 psi, high impedance ll...............#3687.........N/A........#3686

Pico Fuel Injector 19 lb/hr @ 45 psi
for #3501, #35020, #35050, #35060, #35620 & #35630 ll........................................ #3574.........N/A..........N/A
Pico Fuel Injector 29 lb/hr @ 45 psi
for #35000 produced after November 2005, #35030, #35070, #35090, #35210,
#35260, #35270, #35280, #35300, #35310, #35410, #35510, #35640 & #35650 ll... #3583.........N/A........#3853
Pico Fuel Injector 35 lb/hr @ 45 psi (set of 8) for #35080 ll.............................. #3635.........N/A........#3636
Pico Fuel Injector 44 lb/hr @ 45 psi (set of 8) for #35500 ll.............................. #3685.........N/A........#3684
Fuel Rail Stands (for use with Pico fuel injectors) ll..........................................N/A........ #3619.........N/A

CAMSHAFT & VALVETRAIN

#91157

CARBURETORS

All of our crate engines are

warranted through us directly.
One of the great features of
this warranty is your right
to choose a service facility.
Upon Edelbrocks approval,
you have the flexibility of choosing any ASEcertified facility nationwide to take care of your
warranty claims. Whether youre close to home
or on a cross country cruise, weve got you
covered. Important Note: To activate warranty
service, the warranty card included with the
engine must be completed and submitted to
Edelbrock within thirty (30) days of purchase.

CAMSHAFT & VALVETRAIN

CYLINDER HEADS GASKETS MANIFOLDS

CRATE ENGINES

INTRODUCTION

FULLY ASSEMBLED CRATE ENGINES & KITS

Edelbrock offers a vast selection of 100% brand new, fully-assembled performance crate engines for
small-block Chevy, LS Chevy, big-block Chevy, small-block Ford and 5.0L Ford. Edelbrock crate engines
feature the highest quality components. Most are assembled with our Total Power Package and
select engines are offered with an E-Force supercharger for dyno-proven and reliable performance,
right-out-of-the-crate. In fact, theyre so reliable weve included a 2-year/Unlimited mileage warranty
on all applications.

ORDER SATIN, POLISHED, ENDURASHINE

OR BLACK FINISHED EDELBROCK COMPONENTS

Edelbrock understands that every customer wants choices. This is why Edelbrock offers our customers the
option of having their crate engine built with our aluminum products in the traditional satin finish or with a
show-quality polished finish. Order the Polished Package and youll get an engine with polished heads,
intake manifold and water pump if applicable. Two models are also offered with our EnduraShine finish on the
manifold, water pump, carb, valve covers and air cleaner for a brilliant shine that you have to see to believe!

SMALL-BLOCK CHEVY

Edelbrock offers a variety of small-block Chevy performance crate engine packages. They all feature
brand new blocks with 4-bolt mains. E-Street Series engines offer high-quality performance at an
affordable price. Performer Series engines are available from 310 hp to 380 hp. RPM Series applications
are a step-up in performance and are available in packages from 410 hp to 500+ hp.

KITS POWER PACKAGES

Available carbureted or EFI with Edelbrock:

Performer, Performer RPM, Dual-Quad or RPM Air-Gap manifolds
Aluminum heads with swirl-polished stainless steel valves
E-Street, Pro-Flo 2 or Pro-Flo XT EFI systems
Performer or Thunder Series AVS carburetors
Dyno-matched Hydraulic Roller camshafts

LS CHEVY

SUPERCHARGERS

Edelbrock's complete 416 c.i.d. supercharged, LS engine produces an astounding 720 hp and 695 ft-lbs.
of torque, on 91 octane pump gas. The 4.0" stroke, and 4.065" bore pushes this LS3 out to a whopping
416 c.i.d., for incredible low end torque. The 9.5:1 compression ratio allows for safe and reliable
supercharged performance on 91 octane pump gas.

CRATE ENGINES

BIG-BLOCK CHEVY

WATER PUMPS

EFI

Available in three packages:

Engine and electronics package, providing a tuned and ready to run solution
for any project vehicle
Complete engine, accessories and electronics package for the ultimate in LS performance
Long Block only

Available carbureted or EFI with Edelbrock:

Top-of-the-line Thunder AVS carb and Victor Jr. manifold
Fully CNCd E-CNC aluminum heads with swirl-polished stainless steel valves
Pro-Flo 2 or Pro-Flo XT EFI systems
Dyno-matched Hydraulic Roller camshafts

Edelbrocks 555 c.i.d. big-blocks are as close to a true custom motor as you can buy. They feature
exhaust port exits in the stock location, which allows for the use of off-the-shelf headers. Each engine
is assembled by 8-time Pro Street World Champ Pat Musi. They all deliver maximum horsepower and
torque on 91-octane and are available in three performance levels, including 676 hp, 697 hp and 723 hp.

ACCESSORIES

SMALL-BLOCK FORD

Assembled with a brand new aftermarket 347 short block (8.2" deck height). These crate engines are
available in two unique performance levels, including 438 hp and 449 hp.

FUEL PUMPS

NITROUS

Available carbureted with Edelbrock:

RPM Air-Gap or RPM Air-Gap Dual-Quad manifold
Performer RPM aluminum heads with swirl-polished stainless steel valves
Thunder Series AVS carburetors
Dyno-matched Hydraulic Roller camshafts
Front or rear sump oil pans

FORD 5.0L

INDEX

SPORTSWEAR

Now available from Edelbrock, is a complete supercharged Coyote engine for your Ford. The E-Force
supercharger systems helps this engine deliver 700 hp and 606 ft-lbs. of torque. The 9.5:1 compression
ratio allows for safe and reliable supercharged performance on 91 octane pump gas.

Available in one package:

Engine and electronics package, providing a tuned and ready to run solution for any
project vehicle

171

CALL FOR YOUR CUSTOM

CRATE ENGINE REQUEST

WWW.EDELBROCK.COM

CARBURETORS

S/B CHEVY CRATE

ENGINES

AFFORDABLE PERFORMANCE FOR THE ENGINE BUILDER

The Edelbrock E-Street Long-Block is affordably priced for any builder who already owns an Edelbrock
intake manifold and carb and wants to step up to a crate engine on a budget. This long-block is the ideal
bottom end for any high performance street build. It starts with a 100% brand new block with 4-bolt main and
2-piece rear main seal, cast iron crankshaft and cast aluminum pistons. Next, Edelbrock E-Street cylinder
heads and Performer Series camshaft are added. E-Street heads are designed for high performance street
applications and feature larger than stock intake and exhaust ports to improve engine efficiency.
These heads also include hardened spring cups and Heli-coil threaded inserts in the rocker stud bosses.
The E-Street Long-Block is then finished off with Edelbrock Racing Series valve covers and breather.
SPECIFICATIONS
350 c.i.d.
9.0:1
New 4-bolt main with 2-piece rear main seal
Cast Iron
Cast aluminum
Performer #2102

Rocker Arms:
Cylinder Heads:
Valve Covers:
Finish:
Warranty:

1.5:1 Roller #77770

E-Street #5089
Racing Series
Satin
2-year / Unlimited mileage

E-Street Long-Block (Max. 5,500 rpm) ll.............................................................................................#45070

E-Street
#45083

E-STREET 315HP

Rocker Arms:
Manifold:
Cylinder Heads:
Carburetor:
Distributor:
Valve Covers:
Finish:
Warranty:

1.5:1 Roller #77770

Performer EPS #2701, #27013
E-Street #5089
Performer Series #1405, #14053
Included
Racing Series
Satin or black powder coated
2-year / Unlimited mileage

E-Street Carbureted (Max. 5,500 rpm) ll...............................................................................................#45080

With Black Powder Coated Intake and Carburetor (Max. 5,500 rpm) ll........................................#45083

E-STREET 338HP

350 c.i.d.
338 hp
389 ft-lbs.
9.0:1
New 4-bolt main with 2-piece rear main seal
Cast Iron
Cast Aluminum
Performer TBI #2117

Rocker Arms:
Manifold:
EFI Systems:
Cylinder Heads:
Distributor:
Valve Covers:
Finish:
Warranty:

1.5:1 Roller #77770

Performer EPS #2701
Edelbrock E-Street EFI #3664
E-Street #5089
Included
Racing Series
Satin with Black accessories
2-year / Unlimited mileage

FUEL PUMPS

Displacement:
Horsepower:
Torque:
Compression:
Block:
Crankshaft:
Pistons:
Camshaft:

NITROUS

SPECIFICATIONS

ACCESSORIES

WITH MODERN FUEL INJECTION

If you want the performance of modern electronic fuel injection at an affordable price, the E-Street 338 hp
crate engine is what you want. This economical entry level engine has the same great features as the
E-Street carbureted engine, but is equipped with a complete E-Street EFI system that is ready to run
right-out-of-the crate with no tuning needed!
The E-Street EFI system delivers crisp throttle response and the opportunity for increased mileage potential.
System includes a Performer EPS intake manifold, E-Street cylinder heads and new camshaft that is
specifically developed for throttle body injection systems. This engine is also supplied with a set of our
new Racing Series valve covers. This engine is sold without a water pump, visit our website for a complete
listing of small-block Chevy water pumps for your application.

WATER PUMPS

E-Street
#45060

CRATE ENGINES

350 c.i.d.
315 hp
381 ft-lbs.
9.0:1
New 4-bolt main with 2-piece rear main seal
Cast Iron
Cast aluminum
Performer #2102

EFI

Displacement:
Horsepower:
Torque:
Compression:
Block:
Crankshaft:
Pistons:
Camshaft:

SUPERCHARGERS

SPECIFICATIONS

POWER PACKAGES KITS

This is an affordably priced, entry level small-block Chevy crate engine for any street rod or muscle
car driver on a budget that wants affordable performance. Edelbrock E-Street crate engines start out
with a 100% brand new block with 4-bolt main and 2-piece rear main seal. Another version is available
with black powder coated intake manifold, carburetor, valve covers and breather.
Both versions feature E-Street cylinder heads, Performer Series carburetor, Performer EPS intake
manifold, Performer Series camshaft and high quality billet distributor. E-Street heads are designed for
high performance street applications and feature larger than stock intake and exhaust ports to improve
engine efficiency. These engines offer the best combination of affordable and reliable performance
on the market! This engine is sold without a water pump visit our website for a complete listing of
small-block Chevy water pumps for your application.

CAMSHAFT & VALVETRAIN

E-Street Long
Block #45070

Displacement:
Compression:
Block:
Crankshaft:
Pistons:
Camshaft:

MANIFOLDS GASKETS CYLINDER HEADS

E-STREET LONG-BLOCK

SPORTSWEAR

172

INDEX

E-Street Electronic Fuel Injection Crate Engine (Max. 5,500 rpm) ll............................................ #45060

Important Installation Notes: This system will require a high pressure EFI compatible fuel delivery system.
Two fuel delivery kits are available and sold separately, visit our website to select the right kit for your
installation. O2 sensor included and will need to be installed before operation.

EMISSIONS GUIDE

l 50-STATE LEGAL l RACING ONLY l PRE-POLLUTION CONTROLLED VEHICLES l STOCK REPLACEMENT l ENGINE SWAP
PLEASE REFER TO PAGE 212 FOR MORE INFORMATION REGARDING THE EMISSIONS GUIDE.

CARBURETORS
CYLINDER HEADS GASKETS MANIFOLDS

CRATE ENGINES
Performer
Classic 310
#45123

PERFORMER 310/320HP

These entry level small-block Chevy crate engines are ideal for any street rod, muscle car or truck owner
looking for 300+ hp performance on 87-octane fuel. Performer engines are 100% brand new and include a
4-bolt main block, Edelbrock Performer heads, Performer hydraulic camshaft, roller rocker arms, Performer
Series intake manifold and optional water pump. The Performer Classic 310 is available with a single quad
Performer Series carburetor or as a 3x2 with Edelbrock 94 carburetors. The single quad
version features black powder coated accessories, intake manifold, carburetor, water pump and a
red block. A step-up in the Performer line; the Performer 320 has a 9.0:1 compression ratio and delivers
320 hp and 382 ft-lbs. of torque with the choice of Performer EPS or Performer Air-Gap intake manifolds.
All Performer Classic engines feature Classic series finned valve covers in polished or black powder
coated finish for a unique vintage look. Performer Classic 320 engines also include a round Classic series
air cleaner available in polished or black powder coated finish. These crate engines are offered in your
choice of satin aluminum, polished finish or black powder coated and water pump style.

CAMSHAFT & VALVETRAIN

SPECIFICATIONS

KITS POWER PACKAGES

Displacement: 350 c.i.d.

Horsepower: 310 / 320 hp
Torque:
375 / 382 ft-lbs.

CRATE ENGINES

EFI

SUPERCHARGERS

Performer
Classic 310
#47100

Compression:

8.5:1 (Performer 310) / 9.0:1 (Performer 320)

Block:
Crankshaft:
Pistons:
Camshaft:
Rocker Arms:

New 4-bolt main with 2-piece rear main seal

Cast Iron
Cast Aluminum
Performer #2102
1.5:1 Roller #77770

Performer EPS #2701, Performer EPS #27013

Performer Air-Gap #2601 or C-357-B #5418
Cylinder Heads: Performer RPM #60759, #60899 or #60909
Edelbrock 94 Series, Performer Series, Thunder
Carburetor:
Series AVS
Water Pump: Victor Series aluminum
Distributor:
Included
Valve Covers: Cast aluminum style varies by application
Finish Options: Satin, polished or black powder coated
Warranty:
2-year / Unlimited mileage
Manifold:

Satin Polished Black
PERFORMER 310 EPS MANIFOLD, 650 CFM THUNDER SERIES AVS CARB (electric choke)
With short water pump #8810 ll................................................... #45110...................#45111......................N/A
With long water pump #8811 ll.................................................... #45120...................#45121......................N/A
PERFORMER CLASSIC 310 EPS MANIFOLD AND 600 CFM PERFORMER SERIES CARB (electric choke)
With long water pump #88113 ll.................................................. ...N/A........................N/A.....................#45123
PERFORMER CLASSIC 310 C-357-B MANIFOLD AND TRIPLE EDELBROCK 94 SERIES CARBS
Without water pump ll.................................................................. #47100......................N/A........................N/A
With short water pump #8810 ll................................................... #47110......................N/A........................N/A
PERFORMER 320 EPS MANIFOLD & 650 CFM THUNDER SERIES AVS CARB (electric choke)
Without water pump ll.................................................................. #45400...................#45401......................N/A
With short water pump #8810 ll................................................... #45410...................#45411......................N/A
With long water pump #8811 ll.................................................... #45420...................#45421......................N/A
PERFORMER 320 AIR-GAP MANIFOLD & 650 CFM THUNDER SERIES AVS CARB (electric choke)
Without water pump ll.................................................................. #45500...................#45501......................N/A
With short water pump #8810 ll................................................... ...N/A.....................#45511......................N/A
With long water pump #8811 ll.................................................... ...N/A.....................#45521......................N/A

WATER PUMPS

PERFORMER DUAL-QUAD 315HP

Performer
Dual-Quad
#45024

This Performer Dual-Quad has the same specs as the Performer 320 with the addition of an Edelbrock
dual-quad barrel intake & 500 cfm carbs. Customers have their choice of the classic C-26 intake for lower
height and greater hood clearance or the latest generation Performer RPM Air-Gap Dual-Quad intake
manifold. Additional options include satin aluminum or EnduraShine finish (on RPM Air-Gap Dual-Quad)
and water pump style.

ACCESSORIES

SPECIFICATIONS

FUEL PUMPS

NITROUS

Displacement:
Horsepower:
Torque:
Compression:
Block:
Crankshaft:
Pistons:
Camshaft:
Rocker Arms:

350 c.i.d.
315 hp
372 ft-lbs.
9.0:1
New 4-bolt main with 2-piece rear main seal
Cast Iron
Cast Aluminum
Performer #2102
1.5:1 Roller #77770

C-26 #5425 or
RPM Air-Gap Dual-Quad #75254
Cylinder Heads: Performer RPM #60899
Carburetor:
Performer Series or Thunder Series AVS
Water Pump
Victor series aluminum
Distributor:
Included
Valve Covers: Cast aluminum style varies by application
Finish Options: Satin or EnduraShine
Warranty:
2-year / Unlimited mileage
Manifold

Performer C-26 manifold & Performer Carbs

Satin EnduraShine
With short water pump #8810 ll................................................................................#45010.....................N/A
With long water pump #8811 ll..................................................................................#45020.....................N/A
Performer RPM Air-Gap manifold & Thunder Series AVS Carbs
Without water pump ll..................................................................................................N/A....................#45004
With short water pump #8810 ll...................................................................................N/A....................#45014
With long water pump #8811 ll.....................................................................................N/A....................#45024

SPORTSWEAR
INDEX

S/B CHEVY

173

CALL FOR YOUR CUSTOM

CRATE ENGINE REQUEST

WWW.EDELBROCK.COM

ENGINES

PERFORMER HI-TORQ 363HP

Take advantage of modern cylinder head and camshaft technology with the Performer 363HP Hi-Torq Series
of engines. These engines deliver high hp and a broad torque curve from off-idle through 5,500 RPM, thanks to
the Performer-Plus Rollin Thunder hydraulic roller camshaft. In addition to the performance, this combination
provides exceptional vacuum at idle so you can easily operate power brakes and vacuum powered accessories.
SPECIFICATIONS
Performer EPS Vortec #2716 or
RPM Air-Gap Dual-Quad Vortec #75264
Cylinder Heads: E-Tec 170 #60975
Carburetor:
750 cfm Performer or (2) 500 cfm Thunder Series AVS
Water Pump: Victor Series aluminum
Distributor:
Included
Valve Covers: Cast aluminum style varies by application
Finish Options: Satin, polished and EnduraShine
Warranty:
2-year / Unlimited mileage
Manifold:

PERFORMER EPS VORTEC MANIFOLD AND 750 CFM PERFORMER SERIES CARB (electric choke)
PERFORMER 363 HI-TORQ
Satin Polished EnduraShine
Without water pump ll.................................................................. #46400...................#46401...................#46404
Performer 363 Hi-Torq (with short water pump #8810) ll....... #46410...................#46411...................#46414
Performer 363 Hi-Torq (with long water pump #8811) ll......... #46420...................#46421...................#46424
RPM AIR-GAP DUAL-QUAD MANIFOLD, (2) 500 CFM THUNDER SERIES AVS CARBS (1 manual and 1 electric choke)
Performer 363 Hi-Torq (without water pump) ll.....................................................................................#46304
Performer 363 Hi-Torq (with short water pump #8810) ll.....................................................................#46314
Performer 363 Hi-Torq (with long water pump #8811) ll.......................................................................#46324

PERFORMER PRO-FLO XT EFI 380HP

SPECIFICATIONS
Rocker Arms:
EFI Systems:
Cylinder Heads:
Throttle Body:
Distributor:
Valve Covers:
Finish:
Warranty:

1.5:1 Roller #77770

Pro-Flo XT #3528
E-Tec 170 #60975
Edelbrock #3869
Included
Cast aluminum style varies by application
Satin, polished or black powder coated
2-year / Unlimited mileage

Satin Polished Black
Performer 380 Pro-Flo XT EFI (without water pump) ll........... #46600.....................N/A......................#46603

PERFORMER RPM 410HP

The Performer RPM 410 delivers outstanding street high performance. Customers have their choice of
Performer RPM or Performer RPM Air-Gap intake manifolds, satin aluminum or polished finish and
choice of long or short water pump style.
Performer RPM #7101 or
RPMAir-Gap #7501
Cylinder Heads: Performer RPM #60899
Carburetor:
Thunder Series AVS
Water Pump: Victor series aluminum
Distributor:
Included
Valve Covers: Cast aluminum style varies by application
Finish Options: Satin and polished
Warranty:
2-year / Unlimited mileage
Manifold:

174

INDEX

EMISSIONS GUIDE

l 50-STATE LEGAL l RACING ONLY l PRE-POLLUTION CONTROLLED VEHICLES l STOCK REPLACEMENT l ENGINE SWAP
PLEASE REFER TO PAGE 212 FOR MORE INFORMATION REGARDING THE EMISSIONS GUIDE.

SPORTSWEAR

PERFORMER RPM 410 MANIFOLD, 800 CFM THUNDER SERIES AVS CARB (electric choke) Satin
Polished
Without water pump ll...............................................................................................#45600..................#45601
With short water pump #8810 ll................................................................................#45610..................#45611
PERFORMER RPM410 AIR-GAP MANIFOLD, 800 CFM THUNDER SERIES AVS CARB (electric choke)
Without water pump ll...............................................................................................#45700..................#45701
With short water pump #8810 ll................................................................................#45710..................#45711
With long water pump #8811 ll..................................................................................#45720.....................N/A

FUEL PUMPS

350 c.i.d.
410 hp
408 ft-lbs.
9.5:1
New 4 bolt main with 1-piece rear seal
Forged steel
Hypereutectic
Performer RPM #7102
1.5:1 Roller #77770

NITROUS

Displacement:
Horsepower:
Torque:
Compression:
Block:
Crankshaft:
Pistons:
Camshaft:
Rocker Arms:

ACCESSORIES

SPECIFICATIONS

WATER PUMPS

Performer
RPM 410 #45611

CRATE ENGINES

350 c.i.d.
380 hp
401 ft-lbs.
9.0:1
New 4-bolt main with 2-piece rear main seal
Cast Iron
Cast Aluminum
Rollin' Thunder Hydraulic Roller #2208

EFI

Displacement:
Horsepower:
Torque:
Compression:
Block:
Crankshaft:
Pistons:
Camshaft:

SUPERCHARGERS

For those who want modern efficiency and power, Edelbrock offers the Performer 380 Pro-Flo XT.
Like its carbureted sibling, this 350 cubic inch package offers 9.0:1 compression ratio, but the modern
Pro-Flo XT EFI, delivers a stout 380 horsepower and 401 ft-lbs. of torque with increased mileage potential!

POWER PACKAGES KITS

Performer
Pro-Flo XT
EFI #46603

350 c.i.d.
363 hp
405 ft-lbs.
9.0:1
New 4-bolt main with 2-piece rear main seal
Cast Iron
Cast Aluminum
Rollin' Thunder Hydraulic Roller #2208
1.5:1 Roller #77770

CAMSHAFT & VALVETRAIN

Displacement:
Horsepower:
Torque:
Compression:
Block:
Crankshaft:
Pistons:
Camshaft:
Rocker Arms:

MANIFOLDS GASKETS CYLINDER HEADS

Performer
Hi-Torq #46401

CARBURETORS

S/B CHEVY CRATE

CARBURETORS
CYLINDER HEADS GASKETS MANIFOLDS

CRATE ENGINES

PERFORMER RPM E-TEC 435HP

Performer
RPM E-Tec
435 #45904

The Performer RPM E-TEC 435 is the ultimate 350 cubic inch small-block Chevy for muscle cars, street
rods and trucks. Includes a 100% brand new block with forged steel crankshaft, powdered metal rods and
hypereutectic pistons, Edelbrock E-TEC 170 heads, Rollin Thunder hydraulic roller camshaft, roller rocker
arms, RPM Air-Gap intake manifold and Thunder Series AVS 800 cfm carburetor. These crate engines are
offered in your choice of satin aluminum, polished or EnduraShine finish.
Optional water pump styles are also available.
SPECIFICATIONS
Displacement:
Horsepower:
Torque:
Compression:
Block:
Crankshaft:
Pistons:
Camshaft:
Rocker Arms:

HP / Torque

400

Torque

350
300

Horsepower

250
200

350 c.i.d.
435 hp
435 ft-lbs.
9.5:1
New 4 bolt main with 1-piece rear seal
Forged steel
Hypereutectic
Rollin' Thunder Hydraulic Roller #2204
1.5:1 Roller #77770

Manifold:
Cylinder Heads:
Carburetor:
Water Pump:
Distributor:
Valve Covers:
Finish Options:
Warranty:

RPMAir-Gap Vortec #7516

E-Tec 170 #60975
Thunder Series AVS
Victor series aluminum
Included
Cast aluminum style varies by application
Satin, polished and EnduraShine
2-year / Unlimited mileage

PERFORMER RPM E-TEC 435

Satin Polished EnduraShine
Without water pump ll.................................................................. #45900...................#45901...................#45904
With short water pump #8810 ll................................................... #45910...................#45911...................#45914
With long water pump #8811 ll.................................................... #45920...................#45921...................#45924

435 ft-lbs

150
2500 3000 3500 4000 4500 5000 5500 6000 6500
RPM

KITS POWER PACKAGES

CAMSHAFT & VALVETRAIN

450

SUPERCHARGERS

Performer RPM E-Tec

Pro-Flo 2 #46211

PERFORMER RPM E-TEC PRO-FLO 2 EFI 440HP

This fuel injected small-block has the same specifications as the RPM E-TEC 435 but is equipped with
our powerful and efficient Pro-Flo 2 electronic fuel injection. The Pro-Flo 2 EFI system is complete with
intake manifold, fuel injectors, fuel rails and throttle body. The electronic engine control unit (ECU) is
flash programmable and can be fine tuned right from the drivers seat with the included handheld
calibration module. This engine offers all the modern performance of fuel injection with the classic style
of a four-blade throttle body that accepts a round top-mounted air-cleaner.
Your choice of satin aluminum or polished finishes. Optional water pump styles are also available.
SPECIFICATIONS

CRATE ENGINES

EFI

Displacement:
Horsepower:
Torque:
Compression:
Block:
Crankshaft:
Pistons:
Camshaft:

350 c.i.d.
440 hp
425 ft-lbs.
9.5:1
New 4 bolt main with 1-piece rear seal
Forged steel
Hypereutectic
Rollin' Thunder Hydraulic Roller #2205

Rocker Arms:
EFI Systems:
Cylinder Heads:
Water Pump:
Distributor:
Valve Covers:
Finish:
Warranty:

1.5:1 Roller #77770

Performer RPM Pro-Flo 2 Sequential EFI #35070
E-Tec 170 #60975
Victor series aluminum
Included
Cast aluminum style varies by application
Satin and polished
2-year / Unlimited mileage

WATER PUMPS

Performer RPM E-Tec Pro-Flo 2 EFI

Satin Polished
Without water pump ll...............................................................................................#46200..................#46201
With short water pump #8810 ll...................................................................................N/A....................#46211

PERFORMER RPM E-TEC PRO-FLO XT EFI 442HP

NITROUS

ACCESSORIES

Want the absolute latest in EFI performance in a turnkey crate engine package? The Performer RPM
E-TEC 435 with Pro-Flo XT EFI delivers performance, function and style. Pro-Flo XTs styling cues are
striking, thanks to the proprietary intake design and large 90mm front mount throttle body.
The electronic engine control unit (ECU) is flash programmable and can be fine tuned right from
the drivers seat with the included handheld calibration module. This package delivers great drivability
and increased mileage potential.

FUEL PUMPS

SPECIFICATIONS

Performer
RPM E-Tec
Pro-Flo XT
#46903

SPORTSWEAR
INDEX

S/B CHEVY

175

Displacement:
Horsepower:
Torque:
Compression:
Block:
Crankshaft:
Pistons:
Camshaft:

350 c.i.d.
442 hp
409 ft-lbs.
9.5:1
New 4 bolt main with 1-piece rear seal
Forged steel
Hypereutectic
Rollin' Thunder Hydraulic Roller #2205

Rocker Arms:
EFI Systems:
Cylinder Heads:
Distributor:
Valve Covers:
Finish:
Warranty:

1.5:1 Roller #77770

Pro-Flo XT #3528
E-Tec 170 #60975
Included
Cast aluminum style varies by application
Black powder coated
2-year / Unlimited mileage

Performer RPM E-Tec Pro-Flo XT EFI (without water pump) ll........................................................#46903

CALL FOR YOUR CUSTOM

CRATE ENGINE REQUEST

WWW.EDELBROCK.COM

CARBURETORS

S/B CHEVY CRATE

ENGINES

This fuel injected 383 cubic inch small-block delivers horsepower, torque and increased mileage potential
in street rods, muscle-cars or any demanding off-road vehicle. The unique Rollin Thunder hydraulic roller
camshaft delivers broad torque throughout the RPM range and up to 17" of vacuum at as low as 650 rpm!
The ultra-modern Pro-Flo XT fuel injection system is complete with intake manifold, fuel injectors,
fuel rails and throttle body, electronic engine control unit (ECU), easy-to-use handheld calibration module,
distributor, pre-terminated two-piece EFI harness, and all necessary fuel system components.
Your choice of polished or black powder coated finish.
SPECIFICATIONS

Torque

Hi-Torq 383
#46383

383 c.i.d.
408 hp
450 ft-lbs.
9.5:1
New 4 bolt main with 1-piece rear seal
Forged steel
Hypereutectic
Rollin' Thunder Hydraulic Roller #2209

Rocker Arms:
EFI Systems:
Cylinder Heads:
Throttle Body:
Distributor:
Valve Covers:
Finish:
Warranty:

1.5:1 Roller #77770

Pro-Flo XT #3528
E-Tec 170 #609715 or #60975
Edelbrock #3869
Included
Cast aluminum Victor Series
Polished and black powder coated
2-year / Unlimited mileage

Polished Black
Hi-Torq 383 Pro-Flo XT EFI (without water pump) ll.............................................#46381..................#46383

POWER PACKAGES KITS

SIGNATURE SERIES 383 460HP

SUPERCHARGERS

This Signature Series 383 is truly a unique crate engine, designed for those with
an appreciation for Edelbrock performance and collectability. This 383 cubic inch
Chevy delivers 460 horsepower and 460 ft-lbs. of torque. Qualities include: Brand
new block with forged steel crankshaft, powdered metal rods and hypereutectic
pistons, Edelbrock E-TEC 200 heads, Rollin Thunder hydraulic roller camshaft,
roller rocker arms, RPM Air-Gap intake manifold, Thunder Series AVS 800 cfm
carburetor and short water pump. Unique to the SS383, the water pump and
valve covers and air cleaner are styled with a black finish. The valve covers
are then laser engraved with Vic Edelbrocks signature and the engines serial
number. Only 250 will be made get one while you still can.
SPECIFICATIONS
Rocker Arms:
Manifold:
Cylinder Heads:
Carburetor:
Water Pump:
Distributor:
Valve Covers:
Warranty:

1.5:1 Roller #77770

RPM Air-Gap #75161
Polished E-Tec 200 #609815
Thunder Series AVS
Victor Series aluminum
Included
Cast aluminum Signature Series
2-year / Unlimited mileage

E-FORCE RPM SUPERCHARGED

SPECIFICATIONS

550

Torque

HP / Torque

400

Horsepower

350

507 ft-lbs

250
3000 3500 4000 4500 5000 5500 6000 6500
RPM

Block:
Crankshaft:
Pistons:
Camshaft:

New 4 bolt main with 1-piece rear seal

Forged steel
Hypereutectic
Rollin' Thunder Hydraulic Roller #2205

Satin Polished Black
E-Force RPM Supercharged carbureted ll............................... #46040...................#46041...................#46043
E-Force RPM Supercharged EFI ll............................................. #46050...................#46051...................#46053

176

INDEX

300

9.5:1

SPORTSWEAR

E-Force RPM
Supercharged
#46041

450

Compression:

1.5:1 Roller #77770

Edelbrock E-Force #15231
E-Tec 200 #60985
Edelbrock 600 cfm Performer carbs or
1,000 cfm throttle bodies
Included
Cast aluminum Classic Series
Satin, polished and black powder coated
2-year / Unlimited mileage

FUEL PUMPS

500

Rocker Arms:
Supercharger:
Cylinder Heads:
Carburetor or
Throttle Body:
Distributor:
Valve Covers:
Finish Options:
Warranty:

NITROUS

Displacement: 350 c.i.d.

Horsepower: 519 hp (EFI), 518 hp (carbureted)
Torque:
507 ft-lbs. (EFI), 500 ft-lbs. (carbureted)

ACCESSORIES

Want big-block power in a small package for your street rod or muscle car? The recipe is simple...take
the proven RPM E-TEC, bolt on powerful E-Tec 200 cylinder heads and Edelbrock E-Force supercharger.
The EFI engine produced 519 horsepower, 507 ft-lbs. of torque and performed on 91-octane pump gas
with 6 psi. Your choice of satin, polished aluminum or black powder coated finish.

WATER PUMPS

Signature Series 383 ll............................................................................................................................#46213

CRATE ENGINES

383 c.i.d.
460 hp
460 ft-lbs.
9.5:1
New 4 bolt main with 1-piece rear seal
Forged steel
Hypereutectic
Rollin' Thunder Hydraulic Roller #2207

EFI

Signature
Series 383
#46213

Displacement:
Horsepower:
Torque:
Compression:
Block:
Crankshaft:
Pistons:
Camshaft:

CAMSHAFT & VALVETRAIN

Horsepower

Displacement:
Horsepower:
Torque:
Compression:
Block:
Crankshaft:
Pistons:
Camshaft:

MANIFOLDS GASKETS CYLINDER HEADS

HI-TORQ 383 PRO-FLO XT EFI 408HP

EMISSIONS GUIDE

l 50-STATE LEGAL l RACING ONLY l PRE-POLLUTION CONTROLLED VEHICLES l STOCK REPLACEMENT l ENGINE SWAP
PLEASE REFER TO PAGE 212 FOR MORE INFORMATION REGARDING THE EMISSIONS GUIDE.

CARBURETORS

CRATE ENGINES

CYLINDER HEADS GASKETS MANIFOLDS

SUPERCHARGED LS 416

720 HP AND 695 FT-LBS TORQUE

Now available from Edelbrock, is a complete 416 c.i.d. supercharged, LS engine, that produces an
astounding 720 horsepower and 695 ft-lbs. of torque, on 91 octane pump gas. The foundation of this
engine is a brand new, aluminum LS3 block with a forged and balanced Manley crankshaft, forged Manley
H-Beam connecting rods and Manley forged aluminum pistons. The 4.0" stroke, and 4.065" bore pushes
this LS3 out to a whopping 416 c.i.d., for incredible low end torque. The 9.5:1 compression ratio allows for
safe and reliable supercharged performance on 91 octane pump gas.
Helping this engine breathe is the Edelbrock E-Force LS3 supercharger system. This great looking
system features Eaton TVS 2300cc/rev rotors, which provide unparalleled efficiency, whisper quiet
operation and OEM reliability. This engine package comes complete with essential supercharger kit
components, such as the electric intercooler water pump, intercooler plumbing and intercooler recovery
tank, as well as fuel rails, 60 lb/hr. fuel injectors, mass air flow sensor (MAFS) housing and re-usable
air filter. The supercharger equipped on this engine features a drivers side throttle body orientation for
ease of intake routing and a Corvette belt offset for a compact installation. (Other belt offsets and inlet
orientations available upon request.) Pair with universal heat exchangers for a complete installation.
See page 153 for a complete listing and more information on our universal heat exchangers.

Supercharged
LS 416

SPECIFICATIONS
Displacement:
Horsepower:
Torque:
Compression:
Block:
Crankshaft:
Pistons:

KITS POWER PACKAGES

CAMSHAFT & VALVETRAIN

LS3

416 c.i.d.
720 hp
695 ft-lbs.
9.5:1
LS3 Aluminum
Forged 4340
Forged Aluminum - 18cc

Rods:
Camshaft:
Rocker Arms:
Induction:
Cylinder Heads:
Finish:
Warranty:

Forged H-Beam
215/247, .629/.656, 121 LSA
LS3, 1.7 ratio
E-Force Supercharger System #1540
GM with Edelbrock Valve Springs #5768
Black powder coated
2-year / Unlimited mileage

LS 416 Crate Engine (long-block only) ll...............................................................................................#46720

SUPERCHARGERS

Important Note: Top of supercharger measures 21.54" from crank centerline (special order with lower profile,
Corvette, lid for additional 2" of hood clearance.) Oil pan dimensions: 2.625" tall at the front, sump measures 6.75" (front)
to 7.75" (rear) high and 7.75" in length. See our web site for reference dimensions.

EFI

Supercharged LS 416 Crate Engine & Electronics ll.........................................................................#46750

This engine package includes an Edelbrock prepped long block, E-Force supercharger, complete engine
wiring harness, pre-programmed ECU, electronic throttle pedal, MAFS, throttle body, ignition coils and
heated oxygen sensors. This engine is tuned and ready to run right-out-of-the-crate, making it ideal for any
project vehicle desiring an LS3 high performance solution.

WATER PUMPS

CRATE ENGINES

Supercharged LS 416 Crate Engine with Accessories & Electronics ll.......................................#46760

This engine package is our most complete solution. It includes an Edelbrock prepped long block, E-Force
supercharger, complete engine wiring harness, pre-programmed ECU, electronic throttle pedal, MAFS,
throttle body, ignition coils, heated oxygen sensors and front drive accessories, such as the alternator,
water pump, power steering pump, idler pulleys, required brackets and hardware. This engine package is
the ultimate turn key solution for any project vehicle demanding an LS3 engine!

INDEX

SPORTSWEAR

FUEL PUMPS

NITROUS

ACCESSORIES

LS 416 Crate
Engine #46720

LS 416 Crate Engine #46750 with Electronics

177

LS 416 Crate Engine #46760 with Electronics and Accessories

CALL FOR YOUR CUSTOM

CRATE ENGINE REQUEST

WWW.EDELBROCK.COM

CARBURETORS

B/B CHEVY CRATE

ENGINES

AVAILABLE CARBURETED OR EFI

Edelbrock/Musi 555
Carbureted
#49550

Edelbrock/Musi 555 crate engines are a powerful big cubic inch package that features the Edelbrock
E-CNC cylinder heads for the ultimate in Edelbrock performance. E-CNC cylinder heads are fully CNC
ported to achieve optimal air-flow for maximum horsepower and torque in high performance street
and light duty racing applications. They feature exhaust port exits in the stock location, which allows for the
use of off-the-shelf headers. They are available in three options; carbureted and with Pro-Flo 2 or Pro-Flo XT
electronic fuel injection. Each engine is assembled by 8-time Pro Street World Champ Pat Musi.
They all deliver maximum hp and torque on 91 octane.

555 RPM CARBURETED 676HP

SPECIFICATIONS

Edelbrock/Musi 555
Pro-Flo 2 EFI
#46550

555 c.i.d.
676 hp
649 ft-lbs.
10.0:1
Big-block 9.8"
Forged steel 4.250"
Forged
Rollin' Thunder Hydraulic Roller #2264

Rocker Arms:
Manifold:
Cylinder Heads:
Carburetor:
Distributor:
Valve Covers:
Warranty:

1.7:1 Roller #77790

Victor Jr. 454-R #2902
E-CNC #79555
Thunder Series AVS
Included
Cast aluminum
2-year / Unlimited mileage

Edelbrock/Musi 555 RPM Carbureted

Water pump not included ll.....................................................................................................................#49550

555 RPM EFI 697HP

FEATURING PRO-FLO 2 EFI SYSTEM

SPECIFICATIONS
Camshaft:
Rocker Arms:
EFI Systems:
Cylinder Heads:
Distributor:
Valve Covers:
Warranty:

Rollin' Thunder Hydraulic Roller #2264

1.7:1 Roller #77790
Pro-Flo 2 #35520
E-CNC #79555
Included
Cast aluminum
2-year / Unlimited mileage

Edelbrock/Musi 555
Pro-Flo XT EFI #47550

555 RPM XT EFI 723HP

FEATURING PRO-XT EFI SYSTEM

Rollin' Thunder Hydraulic Roller #2264

1.7:1 Roller #77790
Pro-Flo XT #35593
E-CNC #79555
Included
Cast aluminum
2-year / Unlimited mileage

Edelbrock/Musi 555 RPMXT with Pro-Flo XT Fuel Injection

Water pump not included ll.....................................................................................................................#47550

178

INDEX

Camshaft:
Rocker Arms:
EFI Systems:
Cylinder Heads:
Distributor:
Valve Covers:
Warranty:

SPORTSWEAR

555 c.i.d.
723 hp
652 ft-lbs.
10.0:1
Big-block 9.8"
Forged steel 4.250"
Forged

FUEL PUMPS

Displacement:
Horsepower:
Torque:
Compression:
Block:
Crankshaft:
Pistons:

NITROUS

SPECIFICATIONS

ACCESSORIES

The Edelbrock/Musi 555 Pro-Flo XT is the most powerful package in our line and features our powerful
Pro-Flo XT electronic fuel injection. The Pro-Flo XT EFI system consists of a newly engineered intake
manifold with a unique design that delivers more horsepower and torque than a traditional single-plane
intake manifold. The system also includes fuel injectors, fuel rails, fuel pump, throttle body, electronic
engine control unit (ECU) and handheld calibration module. This engine can be fine tuned with the
handheld calibration module or with a laptop.

WATER PUMPS

Edelbrock/Musi 555 RPMEFI with Pro-Flo 2 Fuel Injection

Water pump not included ll.....................................................................................................................#46550

CRATE ENGINES

555 c.i.d.
697 hp
643 ft-lbs.
10.0:1
Big-block 9.8"
Forged steel 4.250"
Forged

EFI

Displacement:
Horsepower:
Torque:
Compression:
Block:
Crankshaft:
Pistons:

SUPERCHARGERS

The Edelbrock/Musi 555 RPM Pro-Flo 2 is complete with Pro-Flo 2 electronic fuel injection and is
assembled with intake manifold, fuel injectors, fuel rails and throttle body, electronic engine control unit
(ECU), handheld calibration module, high quality billet distributor, complete harness, fuel pump, fuel hose,
hardware and software.

POWER PACKAGES KITS

Displacement:
Horsepower:
Torque:
Compression:
Block:
Crankshaft:
Pistons:
Camshaft:

CAMSHAFT & VALVETRAIN

The carbureted package includes a Victor Jr. intake manifold and 800cfm Thunder Series AVS carburetor.
It delivers an incredible 676 horsepower and 649 ft-lbs of torque.

MANIFOLDS GASKETS CYLINDER HEADS

EDELBROCK/MUSI 555

EMISSIONS GUIDE

l 50-STATE LEGAL l RACING ONLY l PRE-POLLUTION CONTROLLED VEHICLES l STOCK REPLACEMENT l ENGINE SWAP
PLEASE REFER TO PAGE 212 FOR MORE INFORMATION REGARDING THE EMISSIONS GUIDE.

CARBURETORS
Performer RPM
#45260

PERFORMER RPM 438HP

Edelbrocks RPM 347 small-block Ford crate engine offers the best of quality and performance.
Customers can also choose finish options that include: satin aluminum, polished or Edelbrocks
exclusive EnduraShine finish. Additional options include the choice of front sump or rear sump oil pan.
Displacement:
Horsepower:
Torque:
Compression:
Block:
Crankshaft:
Pistons:
Camshaft:
Rocker Arms:

347 c.i.d. (4.030" bore x 3.400" stroke)

438 hp
413 ft-lbs.
9.5:1
Small-block (8.2" deck height)
Forged steel
Forged
Rollin Thunder Hydraulic Roller #2281
1.6:1 Roller #77780

Manifold:
Cylinder Heads:
Carburetor:
Water Pump:
Distributor:
Valve Covers:
Finish Options:
Warranty:

RPM Air-Gap
Performer RPM #60255
Thunder Series AVS
Victor Series aluminum
Included
Cast aluminum style varies by application
Satin, polished and EnduraShine
2-year / Unlimited mileage

PERFORMER RPM 347

Satin
Polished
EnduraShine
Front Sump Oil Pan l ........................................................................ #45260 .....................N/A ....................#45264
Rear Sump Oil Pan l......................................................................... #45270 ..................#45271 ..................#45274
Tech Note: Equipped with 3-bolt pulley damper, right-hand inlet water pump and left-hand timing pointer.
Optional 4-bolt pulley damper, left-hand inlet water pump and right-hand timing pointer available by request.

Performer RPM
Dual-Quad
#45464

PERFORMER RPM DUAL-QUAD 449HP

This RPM 347 small-block Ford Dual-Quad crate engine offers the same combination of high quality,
high performance goodies as its single quad sibling but with the addition of an Edelbrock RPM Air-Gap
Dual-Quad induction package. Your choice of front sump or rear sump oil pan.
SPECIFICATIONS
Displacement:
Horsepower:
Torque:
Compression:
Block:
Crankshaft:
Pistons:
Camshaft:
Rocker Arms:

EFI

SUPERCHARGERS

KITS POWER PACKAGES

S/B FORD

SPECIFICATIONS

CAMSHAFT & VALVETRAIN

CYLINDER HEADS GASKETS MANIFOLDS

CRATE ENGINES

347 c.i.d. (4.030" bore x 3.400" stroke)

449 hp
417 ft-lbs.
9.5:1
Small-block (8.2" deck height)
Forged steel
Forged
Rollin Thunder Hydraulic Roller #2281
1.6:1 Roller #77780

Induction:
Cylinder Heads:
Carburetor:
Water Pump:
Distributor:
Valve Covers:
Finish Options:
Warranty:

RPM Air-Gap Dual-Quad #75354

Performer RPM #602515
Thunder Series AVS (2)
Victor series aluminum
Included
Elite Series with EnduraShine Finish
EnduraShine
2-year / Unlimited mileage

CRATE ENGINES

PERFORMER RPM DUAL-QUAD

EnduraShine
Front Sump Oil Pan l ...................................................................................................................................#45464
Rear Sump Oil Pan l ...................................................................................................................................#45474

FUEL PUMPS

NITROUS

ACCESSORIES

WATER PUMPS

Tech Note: Equipped with 3-bolt pulley damper, right-hand inlet water pump and left-hand timing pointer.
Optional 4-bolt pulley damper, left-hand inlet water pump and right-hand timing pointer available by request.

INDEX

SPORTSWEAR

Edelbrock Performer RPM Dual-Quad Crate Engine

installed on Vic Edelbrock's 1940 Ford Deluxe Coupe which
has participated in many Hot Rod Magazine Power Tours

179

CALL FOR YOUR CUSTOM

CRATE ENGINE REQUEST

WWW.EDELBROCK.COM

CARBURETORS

5.0L FORD CRATE

ENGINES

MANIFOLDS GASKETS CYLINDER HEADS

CAMSHAFT & VALVETRAIN
POWER PACKAGES KITS

Check out our YouTube channel to see the complete

video on this powerful E-Force equipped engine.
Coyote 5.0L
#46770

SUPERCHARGERS

SUPERCHARGED FORD COYOTE 5.0L

700 HP AND 606 FT-LBS TORQUE

Crankshaft:
Pistons:

Forged
Forged Aluminum

Important Note: Top of supercharger measures 21.1" from crank centerline. See our website for reference dimensions.

EMISSIONS GUIDE

PLEASE REFER TO PAGE 212 FOR MORE INFORMATION REGARDING THE EMISSIONS GUIDE.

180

INDEX

l 50-STATE LEGAL l RACING ONLY l PRE-POLLUTION CONTROLLED VEHICLES l STOCK REPLACEMENT l ENGINE SWAP

SPORTSWEAR

E-Force Supercharged Coyote 5.0L Crate Engine (with electronics & accessories) ll ...............#46770
This package is our most complete and ultimate solution for the Ford enthusiast transplanting a Coyote
powerplant into their project vehicle. It includes a complete engine with an E-Force Supercharger system
installed, wiring harness, pre-programmed ECU, electronic throttle pedal, oxygen sensors, MAFS, air filter,
fuse box, water pump, hose, alternator, belts, idlers and hardware.

FUEL PUMPS

Ford Aluminum

NITROUS

Block:

Forged H-Beam
Stock Ford
Stock Ford
E-Force Supercharger System
Cylinder Heads: Stock Four-Valve Aluminum
with Boss 302 valve springs
Finish:
Black powder coated
Warranty:
2-year / Unlimited mileage
Rods:
Crankshaft:
Rocker Arms:
Induction:

ACCESSORIES

5.0L (302 c.i.d.)

700 hp
606 ft-lbs.
9.5:1

WATER PUMPS

E-Force superchargers are

manufactured in the USA
for unsurpassed quality and
performance.

Displacement:
Horsepower:
Torque:
Compression:

CRATE ENGINES

SPECIFICATIONS

EFI

Now available from Edelbrock, is a complete supercharged Coyote engine for your Ford project vehicle.
The core of this engine is a brand new Ford aluminum block built for high performance applications.
The lightweight aluminum block features a forged and balanced crankshaft, forged Manley H-Beam
connecting rods and Mahle forged aluminum pistons. This crate engine produced 700 hp and 606 ft-lbs.
of torque at the flywheel when tested at the Edelbrock dyno facility. The 9.5:1 compression ratio allows
for safe and reliable supercharged performance on 91 octane pump gas.
Helping this engine breathe is the Edelbrock E-Force supercharger system. This great looking system
features Eaton TVS 2300cc/rev rotors, which provide unparalleled efficiency, whisper quiet operation
and OEM reliability. This engine package comes complete with essential supercharger kit components,
such as the electric intercooler water pump, intercooler plumbing and intercooler recovery tank, as well
as fuel rails, 50 lb/hr. fuel injectors, coils, mass air flow sensor (MAFS) housing and re-usable air filter.
Includes all front end drive accessories: water pump, alternator, idlers, tensioners, belts and hardware.
Pair with universal heat exchangers for a complete installation. See page 153 for a complete listing and
more information on our universal heat exchangers.

CARBURETORS
CYLINDER HEADS GASKETS MANIFOLDS
CAMSHAFT & VALVETRAIN

IMPORTANT
WATER PUMP
INFORMATION
Standard Rotation Reverse Rotation

HOW TO DETERMINE IF
YOUR WATER PUMP IS
SHORT OR LONG STYLE

It is important to use the correct style

water pump or the pulleys in the engine
may not line up correctly.
Determining hub height is simple;
just measure the distance from the
engine block to the mounting surface.
Then match your results with the
reference dimensions for your listing.

SUPERCHARGERS

KITS POWER PACKAGES

WATER PUMPS

INTRODUCTION

VICTOR SERIES ALUMINUM WATER PUMPS

OPTIMUM COOLING FOR AMC/JEEP, CHEVY,
CHRYSLER, FORD & PONTIAC

Designed and cast at the Edelbrock Foundry and machined at Edelbrocks manufacturing facility in the
USA, Edelbrock water pumps are the best in quality and performance. Edelbrock Victor Series water
pumps provide maximum cooling for the street and the race track. Theyre ideal to prevent overheating
in street rods and street machines, as well as in tow rigs and motorhomes. Using state-of-the-art
racing technology, Edelbrock has designed these super cooling water pumps to provide maximum
flow, maximum pressure and equal distribution to both sides of the block within 1%. Available for most
popular applications, these high-performance pumps flow in only one direction for optimum efficiency.
The castings computer-designed internal passages and precision powdered metal impeller produce the
maximum flow rate possible. Four finishes are available on select water pumps: Satin Aluminum, Polished,
Black Powder Coated and EnduraShine.
Computer-designed, one-way internal
passages flow more coolant at a
higher velocity, even at lower rpm

Cast from A356 aluminum,

heat treated to T-6 spec and
machined on Edelbrocks
computerized CNC machining
centers for optimum quality

Adjustable cam stop

on S/B Chevy
pumps prevents
cam walk

O-ring replaces
conventional
gaskets to provide
a superior seal on
most pumps

Edelbrock water pumps

are manufactured
in the USA for
unsurpassed quality.

Hub machined from billet steel for

strength and black oxide coated for
corrosion resistance

Be Cool, Billet Specialties, March

Performance & Jones Racing rely on
Edelbrock water pumps for maximum
cooling system performance

FUEL PUMPS

Edelbrock beats the competition hands down with

features just not found on competitors water pumps...
Edelbrock water pumps are designed, cast, machined
and tested right here in America for unbeatable quality
A cleaner casting and precision
machining ensures higher flow volume
and greater cooling efficiency than
other water pumps

SPORTSWEAR
INDEX

Heavy-duty, 3/4" integral ball/roller

bearing used on race models
to withstand higher torsional loads
at high rpm

Precision powdered metal

impeller is larger than
other high-performance
impellers producing
greater pressure and
increased volume

WHY CHOOSE EDELBROCK WATER PUMPS?

NITROUS

ACCESSORIES

WATER PUMPS

CRATE ENGINES

EFI

Heavy-duty seal
for leak-proof
operation
and long life

181

Modern vane design

vastly increases coolant flow
over competitors dated
impeller design

WWW.EDELBROCK.COM

CARBURETORS
CYLINDER HEADS GASKETS MANIFOLDS
CAMSHAFT & VALVETRAIN

IMPORTANT
WATER PUMP
INFORMATION
Standard Rotation Reverse Rotation

HOW TO DETERMINE IF
YOUR WATER PUMP IS
SHORT OR LONG STYLE

It is important to use the correct style

water pump or the pulleys in the engine
may not line up correctly.
Determining hub height is simple;
just measure the distance from the
engine block to the mounting surface.
Then match your results with the
reference dimensions for your listing.

SUPERCHARGERS

KITS POWER PACKAGES

WATER PUMPS

INTRODUCTION

VICTOR SERIES ALUMINUM WATER PUMPS

OPTIMUM COOLING FOR AMC/JEEP, CHEVY,
CHRYSLER, FORD & PONTIAC

Designed and cast at the Edelbrock Foundry and machined at Edelbrocks manufacturing facility in the
USA, Edelbrock water pumps are the best in quality and performance. Edelbrock Victor Series water
pumps provide maximum cooling for the street and the race track. Theyre ideal to prevent overheating
in street rods and street machines, as well as in tow rigs and motorhomes. Using state-of-the-art
racing technology, Edelbrock has designed these super cooling water pumps to provide maximum
flow, maximum pressure and equal distribution to both sides of the block within 1%. Available for most
popular applications, these high-performance pumps flow in only one direction for optimum efficiency.
The castings computer-designed internal passages and precision powdered metal impeller produce the
maximum flow rate possible. Four finishes are available on select water pumps: Satin Aluminum, Polished,
Black Powder Coated and EnduraShine.
Computer-designed, one-way internal
passages flow more coolant at a
higher velocity, even at lower rpm

Cast from A356 aluminum,

heat treated to T-6 spec and
machined on Edelbrocks
computerized CNC machining
centers for optimum quality

Adjustable cam stop

on S/B Chevy
pumps prevents
cam walk

O-ring replaces
conventional
gaskets to provide
a superior seal on
most pumps

Edelbrock water pumps

are manufactured
in the USA for
unsurpassed quality.

Hub machined from billet steel for

strength and black oxide coated for
corrosion resistance

Be Cool, Billet Specialties, March

Performance & Jones Racing rely on
Edelbrock water pumps for maximum
cooling system performance

FUEL PUMPS

Edelbrock beats the competition hands down with

features just not found on competitors water pumps...
Edelbrock water pumps are designed, cast, machined
and tested right here in America for unbeatable quality
A cleaner casting and precision
machining ensures higher flow volume
and greater cooling efficiency than
other water pumps

SPORTSWEAR
INDEX

Heavy-duty, 3/4" integral ball/roller

bearing used on race models
to withstand higher torsional loads
at high rpm

Precision powdered metal

impeller is larger than
other high-performance
impellers producing
greater pressure and
increased volume

WHY CHOOSE EDELBROCK WATER PUMPS?

NITROUS

ACCESSORIES

WATER PUMPS

CRATE ENGINES

EFI

Heavy-duty seal
for leak-proof
operation
and long life

181

Modern vane design

vastly increases coolant flow
over competitors dated
impeller design

WWW.EDELBROCK.COM

CARBURETORS

Application
#8850

#88513

KITS POWER PACKAGES

#88514

Standard

Short

5/8"

3/4"

5-3/4"

1.95"

Satin
Polished
Black
EnduraShine

Fits 1969-87 B/B and some

1988-91 heavy-duty trucks with
Mark IV engines. Does not fit
Corvettes or trucks over 1-ton.

Standard

Long

5/8"

3/4"

7-5/16" 1.875"

Satin
Polished
Black
EnduraShine

Fits all 1971-74 B/B Corvettes.

Standard

Short

3/4"

3/4"

5-3/4"

1.95"

5/8"

3/4"

5-1/2"

Satin
1.95" EnduraShine

Long

5/8"

3/4"

7-5/16" 1.875"

Short

5/8"

3/4"

5-3/4"

2.00"

Edelbrock water pumps

are manufactured
in the USA for
unsurpassed quality.

Satin
Polished

Satin
Polished
Satin
Polished
EnduraShine

Part No.
#8850
#8860
#88503
#88504
#8851
#8861
#88513
#88514
#8852
#8862
#8858
#88584
#8853
#8863
#8854
#8864
#88544

Heater Hose Fittings

now available, see
page 79 for information

SUPERCHARGERS

FORD 4.6L
#8858

EFI
CRATE ENGINES

Finish

Fits all 1965-68 B/B Chevy,

passenger cars 1966-72 trucks
and 1969-70 B/B Corvettes.

Ideal for street rods with

aftermarket serpentine belt pulleys. Reverse

#88413

These pumps feature a 3.80" powdered metal impeller and larger than stock
3/4" bearing. Short-style pump #8803 is designed to fit 2002 Mustang GT and
Cobra, 2003-04 Mustang GT, Cobra and Mach 1. Measures 2.58" from block
surface to hub. Long-style pump #8804 fits 1996-01 Mustang GT and Cobra
and 2005-10 Mustang GT. Pump #8804 measures 3.43" from block surface to
4.6L Ford
hub. Can be used on selected 2001 Mustang GT and Cobras and will require
short-style #8803
measurement to determine long or short style.
Short-Style Water Pump (satin aluminum finish) ....................................................................................#8803
Long-Style Water Pump (satin aluminum finish) .....................................................................................#8804

FORD SMALL-BLOCK
289/302/351W/351C/351M/400/5.0L/5.8L
Application

#8842

Fits all 1965-68 289, 1968-69 302,

1969 351W engines, 1966-1977 Bronco and
includes a right-hand inlet with back plate.

FUEL PUMPS

NITROUS

ACCESSORIES

WATER PUMPS

Block to
Pilot Ball/Ball Hub Inlet
Rotation Height Shaft Bearing Height Size

Fits 1958-65 B/B Chevy

Standard
348/409 W-Series engines.
Fits 1988 and later C/K pickups
equipped with 454 B/B using
Reverse
serpentine drive belt (no V Belts).

SPORTSWEAR
INDEX

HIGH PERFORMANCE STREET

CHEVROLET BIG-BLOCK

CAMSHAFT & VALVETRAIN

CYLINDER HEADS GASKETS MANIFOLDS

WATER PUMPS

#8849

183

Block to
Pilot Ball/Ball Hub Inlet
Rotation Shaft Bearing Height Size
Standard

5/8"

3/4"

Designed for 1965-67 289 Special K engine Standard

code with right-hand inlet with no back plate.

5/8"

3/4"

Fits 1970-78 302, 1970-87 351W engines

with left-hand inlet and back plate.

Standard

5/8"

3/4"

Fits 1970-79 351C and 351M/400 engines with Standard

left-hand inlet and no back plate.

5/8"

3/4"

Designed to fit 1986-93 Ford 5.0L V8 engines

using a serpentine accessory drive belt
Not for early model 289-302 V8's.

Reverse

5/8"

3/4"

Fits 1993-97 Ford 5.0/5.8L V8 F-Series trucks

using a serpentine accessory drive belt.
Not for early model 289-302 V8s.
Will not fit 1994-95 Mustangs.

Reverse

5/8"

3/4"

Part No.
#8841
Satin
#8846
Polished
5.42" 1.78"
Black
#88413
EnduraShine #88414
#8842
Satin
5.16" 1.78" Polished
#8847
#8843
Satin
5.70" 1.78" Polished
#8848
Black
#88433
#8844
Satin
5.71" 1.78" Polished
#8849
#8840
Satin
5-3/4" 1.78" Polished
#8845
Black
#88403
5-3/4"

1.78"

Finish

Satin

#8045

WWW.EDELBROCK.COM

CARBURETORS

HIGH PERFORMANCE STREET WATER

PUMPS

429/460

Fits all 1970-92 429/460 V8's in passenger cars, trucks, vans and motorhomes. Has heavy-duty 3/4" ball/roller
bearing and 3/4" pilot shaft. Features 1.98" inlet diameter and measures 5-1/2" from block surface to hub.
Left-hand inlet, includes new backing plate.
Satin
Polished
Black
For 1970-92 429/460 ............................................................................ #8866 ....................#8876 ....................#88663

FE

This pump is designed to fit all 1965-76 Ford FE V8's. Comes with heavy-duty 3/4" ball/ball bearing,
2.125" inlet diameter and 5/8" pilot shaft. Measures 7.56" from block surface to hub.
Satin
Polished
For 1965-76 352/428 Ford FE ..........................................................................................#8805 ...................#8835

CHRYSLER

SMALL-BLOCK

Available for 1969-85 Chrysler 318-360 engines, this pump is a direct replacement for stock and will accept
all factory pulleys and accessories. Has heavy-duty 3/4" ball/ball bearing and seal. Dimension from block
surface to hub: 5.55". Features an inlet diameter of 1.75" and the 5/8" pilot shaft.
Satin
Polished
For 1969-85 318-360 Chryslers ......................................................................................#8877 ...................#8887
Designed for maximum cooling and performance in 1958-79 361-440 Chrysler engines (including 426 HEMI).
Engineered to directly replace the stock pump in the factory cast-iron housing or work with the Mopar
Performance aluminum housing. Measures 3.07" from block surface to hub and features a 5/8" pilot shaft.
Satin
Polished
Black
For 1958-79 361-440 Chryslers (incl. 426 HEMI)............................ #8814 ....................#8824* ..................#88143
Fits 1969-79 389-455 c.i.d Pontiac engines with 11 bolt front timing cover with back plate. Manufactured
with a 3/4" ball/ball bearing. Measures 4-1/2" from block surface to hub and features a 5/8" pilot shaft.
Satin
Black
Pump for 1969-79 389-455 ..............................................................................................#8856 ...................#88563

Pontiac Standard
Rotation #8856

POLISHED ALUMINUM WATERNECKS

#4818

EMISSIONS GUIDE

#8028

For use on 1986 and later big-block Chevy, when installing Edelbrock #2161 or #3761 intake manifold.
Water Neck Adapter ....................................................................................................................................#8028
*While supplies last

PLEASE REFER TO PAGE 212 FOR MORE INFORMATION REGARDING THE EMISSIONS GUIDE.

184

INDEX

l 50-STATE LEGAL l RACING ONLY l PRE-POLLUTION CONTROLLED VEHICLES l STOCK REPLACEMENT l ENGINE SWAP

SPORTSWEAR

WATER NECK ADAPTER

FUEL PUMPS

#4817

NITROUS

#4816

These polished aluminum waternecks are a great way to finish off your engine. They feature an O-ring
design for an improved seal, which also allows for removal without requiring a new gasket. Fits any 1-1/2"
diameter outlet hose.
Straight (Chevy 4.3L V6, Chevy V8) .............................................................................................................#4816
15 (small and big-block Chevy V8)..................................................................................................................#4810
15 (small-block Ford V8)....................................................................................................................................#4814
45 Adjustable (Chevy 4.3L V6, Chevy V8) .................................................................................................#4817
90 Adjustable (Chevy 4.3L V6, Chevy V8) .................................................................................................#4818

ACCESSORIES

Edelbrock thermostats are designed to ensure consistent cooling in high-performance applications.

These thermostats feature a brass and copper valve assembly with a stainless steel body for durability.
They are bolt-on OE style replacements and will fit many popular domestic and import applications.
Application
Temp (F)
53mm
63mm
High Performance Thermostats ..................................................................160..................... #8603 ..........#8606
High Performance Thermostats ..................................................................180..................... #8604 ..........#8607
High Performance Thermostats ..................................................................190..................... #8605 ........... N/A

WATER PUMPS

#7253

HIGH PERFORMANCE THERMOSTATS

CRATE ENGINES

#8603

#7257

For S/B Chevy ................................................................................................................................................#7251

For B/B Chevy ................................................................................................................................................#7252
For S/B & B/B Chrysler ................................................................................................................................#7257
For early S/B Ford (standard rotation including 351W, 351C, and 351M/400) .....................................#7253
For late S/B Ford (reverse rotation) ...........................................................................................................#7254
For B/B Ford & FE .........................................................................................................................................#7258

EFI

#7251

REPLACEMENT WATER PUMP GASKETS

SUPERCHARGERS

PONTIAC STANDARD ROTATION

POWER PACKAGES KITS

BIG-BLOCK

S/B Chrysler
Polished #8887

CAMSHAFT & VALVETRAIN

FE Ford
#8805

MANIFOLDS GASKETS CYLINDER HEADS

FORD

429/460 Ford
Polished #8876

FOR SMALL-BLOCK AND LS CHEVY

These Victor Pro series water pumps are designed for high output racing engines, especially dirt
late model and circle track applications. They feature a two-piece cartridge style design for easy
maintenance and improved performance. The two-piece design features improved symmetrical flow
paths resulting in increased flow and requiring less horsepower from the engine. A new aggressive
3.45" impeller with improved inlet and outlet port designs provides maximum cooling with equal
distribution making these water pumps highly efficient. All of this helps eliminate hot spots in the
engine, producing optimum power from every cylinder. Finally, they feature a -2 AN bleeder screw for
quick coolant system bleeding. These water pumps will fit more aftermarket racing application pulley
designs compared to other pumps on the market.

CARBURETORS

VICTOR PRO FOR SMALL-BLOCK CHEVY

S/B Chevy
Two-Piece Pump #8827

KITS POWER PACKAGES

This pump fits all GM LS series engines, but will require the use of aftermarket competition brackets.
It measures 6" from block surface to hub and features a relocated thermostat housing on the top. It is a
standard clockwise rotation design to accommodate racers using a simplified accessory drive setup. It is
primarily designed for use in racing applications and will require the use of longer than stock mounting bolts.
Can be modified for street applications, but will not fit stock accessory brackets. Can not be used with
a stock manifold, must be used with carbureted style manifolds. 1.85" inlet diameter.
Victor Pro Two-Piece Water Pump for GM LS .......................................................................................#8895
Replacement Cartridge ...............................................................................................................................#8828

VICTOR PRO SERIES DELIVERS

+20% MORE OUTPUT WITH -10% LESS PARASITIC
LOSS OVER A STANDARD WATER PUMP!

CRATE ENGINES

EFI

SUPERCHARGERS

GM LS Two-Piece Water Pump #8895

S/B Chevy Circle

Track Pump #8817

S/B Chevy
Circle Track
Pump #8819

VICTOR SERIES
CIRCLE TRACK WATER PUMPS

These competition water pumps are designed for circle track and endurance racing applications.
They feature a revised impeller entry, a hard black anodized finish and .100" thicker rear cover
for greater durability. Auxiliary water outlets ease fabrication of custom plumbing systems and
auxiliary fittings are available as AN or NPT. These water pumps provide maximum cooling
with equal distribution to both sides of the block within 1%. By eliminating hot spots, the engine
produces optimum power from every cylinder without detonation and pre-ignition. Other features
include billet steel hub and heavy-duty ball/roller bearings.

SMALL-BLOCK CHEVY

FUEL PUMPS

NITROUS

ACCESSORIES

WATER PUMPS

This standard rotation pump fits all 1955-95 S/B Chevy engines. Measures 5-13/16" from block surface
to hub. The unique features of this water pump include -10 AN auxiliary outlet ports (90 to the block)
and -6 AN top inlet port. This pump is primarily designed for use in racing applications and will require
the use of longer than stock mounting bolts. Can be modified for street applications, but may not fit
stock accessory brackets. 1.85" inlet diameter.
Victor Pro Two-Piece Water Pump for S/B Chevrolet ..........................................................................#8827
Replacement Cartridge ...............................................................................................................................#8828

VICTOR PRO FOR GM LS SERIES

S/B Ford Circle

Track Pump
#8833

SPORTSWEAR
INDEX

COMPETITION

VICTOR PRO SERIES RACING WATER PUMPS

This pump features an

aggressive 3.45" light
weight impeller design.
Its manufactured
from A356-T6
aluminum in our
Permanent Mold facility
creating a strong and
durable casting!

CAMSHAFT & VALVETRAIN

CYLINDER HEADS GASKETS MANIFOLDS

WATER PUMPS

185

These pumps fit all 1955-95 S/B Chevy engines. They come with heavy-duty 3/4" ball/roller bearing and
a 1.85" inlet diameter. Both measure 5-13/16" from block surface to hub and come with 3/4" pilot shaft.
Victor Circle Track Pump, -8 AN auxiliary fittings at 90 to the block .............................................#8816
Victor Circle Track Pump, 3/8" NPT auxiliary fittings at 45 to the block ........................................#8817
Victor Circle Track water pump #8819 is an upgraded version of water pump #8816. It features
an improved right side outlet passage, -10 AN side water outlet ports, aluminum back plate,
marine seal, and a powdered metal impeller. Measures 5-13/16" from block surface to hub
with a 1.84" inlet diameter and 3/4" pilot shaft.
Victor Circle Track Water Pump, -10 AN auxiliary fittings at 90 to the block ...............................#8819

SMALL-BLOCK FORD

Fits all Windsor style blocks with S/B Ford timing cover. Comes with heavy-duty 3/4" ball/roller bearing
and 3/4" pilot shaft. Also features a 1.78" diameter left-hand inlet with back plate. Measures 5.70" from
the block surface to the hub.
Victor Circle Track Pump ...........................................................................................................................#8833

WWW.EDELBROCK.COM

CARBURETORS

PRO-FLO AIR CLEANERS ACCESSORIES

14" Air
Cleaner
#1223

PRO-FLO AIR CLEANERS

CAMSHAFT & VALVETRAIN

Pro-Flo 1000 Air

Cleaner #10023

MANIFOLDS GASKETS CYLINDER HEADS

Pro-Flo 1000 Series

Air Cleaner #1002

PRO-FLO 1000 SERIES REUSABLE AIR CLEANER

Pro-Flo 1000 Series, with the popular reusable air filter, offers superior flow capacity, low profile, good
filtration, performance benefits and long-term savings. This air cleaner fits most popular domestic
carburetors and provides minimum flow restriction and good filtering ability. These are an economical
and effective way to keep clean air feeding your engine without the expense of a new filter every few
thousand miles. Inside every Edelbrock Pro-Flo 1000 Series, youll find our exclusive reticulated urethane
foam element. Maintaining Pro-Flos foam element is simple. Just release the spring clip, remove the
element, wash in hot, soapy water, rinse, dry and reassemble. If necessary, replace with element #1099.
Overall Height Chrome Black
Pro-Flo Air Cleaner for 4-bbl. Carbs with 5-1/8" Air Horn l ............................. 3" .................. #1002 .....#10023
Replacement Air Filter for Pro-Flo 1000 Series Air Cleaner #1002 & #10023........................ #1099 ......#1099

Top off your engine with a good looking Pro-Flo air cleaner. The Edelbrock signature and styling coordinate
beautifully with Edelbrock Signature Series valve covers. These air cleaners are stamped from a high
quality 18-gauge steel. Available in two great finishes; triple chrome-plated with stamped Edelbrock logo
and textured black finish with a screen printed Edelbrock logo for a modern look.

ROUND AIR CLEANERS

TRIANGULAR AIR CLEANER

FOR 1988-92 GM V8 ENGINES

These are direct replacements for stock air cleaner tops on S/B and B/B Chevy/GMC V8 cars and trucks
with Throttle Body Injection. Stamped from 18-gauge steel and triple chrome-plated. Sealing ring included.
Chrome Air Cleaner Top for 1988-92 GM T.B.I. Vehicles l .................................................................#1213

SPORTSWEAR

T.B.I. Air Cleaner

Top #1213

Note: See page 192 for replacement elements.

(A) Will not fit turbo engine

EMISSIONS GUIDE

PLEASE REFER TO PAGE 212 FOR MORE INFORMATION REGARDING THE EMISSIONS GUIDE.

186

INDEX

l 50-STATE LEGAL l RACING ONLY l PRE-POLLUTION CONTROLLED VEHICLES l STOCK REPLACEMENT l ENGINE SWAP

FUEL PUMPS

PRO-FLO T.B.I. CHROME AIR CLEANER TOP

NITROUS

The Signature Series triangular air cleaner is a style with a shape reminiscent of the muscle car era.
This hot-looking chrome air cleaner has the classic Edelbrock signature. This triangular air cleaner
comes with a high-quality 2-1/2" washable, pre-oiled cotton gauze element for excellent filtration.
Designed for use with 5-1/8" diameter carbs (Edelbrock square-bore, Q-Jet, etc.), the Pro-Flo #1222
clears HEI distributors and electric choke housings. Air cleaner dimensions: 14-1/8" wide x 13-3/8" long.
Pro-Flo Chrome Triangular Air Cleaner (overall height 3-1/2") l ........................................................#1222

ACCESSORIES

Triangular
Air Cleaner #1222

WATER PUMPS

Oval Air
Cleaner #1235

Available for Edelbrock single- and dual-quad applications, these oval air cleaners clear HEI distributors
and all stock components. #1235 fits all Edelbrock dual-quad manifolds and others with 6-7/16" carb
center-to-center. They come with a high-quality 2-1/2" washable, pre-oiled cotton gauze filter for
excellent filtration. Overall dimension is 13-1/2" x 7".
Oval for Dual-Quads (overall height 3-1/2") l .........................................................................................#1235
Oval for Single 4-Barrel Carburetor (overall height 3-1/2") l ..............................................................#1236

CRATE ENGINES

OVAL AIR CLEANERS

EFI

Installation Notes: #1207/#1208 are stock height and require spacer #8092 with electric choke carbs or banjo fitting
#8089 with manual choke carbs. #1221, #1223, #1224 and #1225 fit all Edelbrock carbs and Q-jets (3/8 taller than #1207).

Air Cleaner
Spacer #8092

SUPERCHARGERS

14" Air
Cleaner
#1206

POWER PACKAGES KITS

Edelbrock round air cleaners work with all popular 5-1/8" diameter carburetors (Performer Series,
Thunder Series AVS, Holley, Thermo-Quad, Quadrajet and Carter AFB). The 10" and 14" models have
knock-outs in the air cleaner base for use with a crankcase ventilation adapter #1205 (sold separately on
page 192). #1203, #1208, #1209, #1221 and #1223 fit all Edelbrock carburetors. Overall height is measured
from the gasket flange to the top of the supplied retaining nut. Dimensions are accurate within 1/8".
14" DIAMETER AIR CLEANER
Overall Height
Chrome
Black
With 3" paper element l.......................................................................... 3-5/16".................. #1207 ................ N/A
With 3" pre-oiled cotton element l ......................................................3-5/16".................. #1206 ................ N/A
With 3" paper element, 3/8" deeper flange (A) l.................................3-3/4"................... #1221 ...............#1223
With 3" pre-oiled cotton element, 3/8" deeper flange (A) l ...............3-3/4"................... #1224 ...............#1225
10" diameter with 2" paper element l ..................................................3-1/2"................... #1208 ...............#1203
6" diameter with 2-1/2" paper element, 5-1/8" base l........................3-5/8"................... #1209 ................ N/A
Air Cleaner Spacer .................................................................................... 3/4" ......................N/A ................#8092
Air Cleaner Spacer .................................................................................... 1/2" ......................N/A ................#8093

CARBURETORS

SIGNATURE SERIES

ACCESSORIES VALVE COVERS

CYLINDER HEADS GASKETS MANIFOLDS

SIGNATURE SERIES VALVE COVERS

AMC/Jeep #4431

CAMSHAFT & VALVETRAIN

Small-Block Chevy, Low Profile #4443

KITS POWER PACKAGES

Small-Block Chevrolet, Centerbolt #4446

SUPERCHARGERS

Big-Block Chevrolet, Low Profile #4483

Big-Block Chrysler #4491

Overall
Height
Chrome
Black
AMC/Jeep 290-304-343-360-390-401 V8 67-91 (no baffle) .................................. 3.0" ........... #4431.............N/A
Buick 3.8L & 4.1L V6 77 & later (no baffle) (A) ..................................................... 3.1" ........... #4486.............N/A
Chevrolet 194-292 1962-88 Inline 6 (USA) & 1962-2001 (South America) ........ 3.5" ........... #4477.............N/A
Chevrolet 2.8L 60 V6 82-93 (no baffle) .................................................................. 2.6" ........... #4488.............N/A
Chevrolet 262-400 59-86 (low) (B) ........................................................................... 2.8" ........... #4449........... #4443
Chevrolet 262-400 59-86 (tall) (A) (B) l................................................................. 3.7" ........... #4649........... #4643
Chevrolet 262-400 87-95 Centerbolt (low) ............................................................. 2.2" ........... #4446.............N/A
Chevrolet 396-502 V8 65 & later (low) ................................................................... 2.6" ........... #4480........... #4483
Chevrolet 396-502 V8 65 & later (tall) .................................................................... 3.8" ........... #4680........... #4683
Chrysler 318-340-360 V8 65-91 ................................................................................ 3.2" ........... #4495........... #4473
Chrysler 361-383-400-413-426-440 V8 58-79.......................................................... 3.6" ........... #4491........... #4493
Ford 260-289-302 (not Boss) and 351W V8 (D) ...................................................... 3.7" ........... #4460........... #4603
Ford FE 332-352-360-390-406-410-427-428 V8 58-76 ............................................ 3.9" ........... #4462........... #4623
Ford 351M-400 and 351C V8...................................................................................... 2.9" ........... #4461.............N/A
Ford 429/460 V8 ........................................................................................................... 3.6" ........... #4463.............N/A
Oldsmobile 350-455 V8 (fits 5- and 10-hole heads) .............................................. 2.9" ........... #4485.............N/A
Pontiac 301-326-350-389-400-421-455 V8 - 62-79 (low - no baffle) (C)...................... 3.0" ........... #4456........... #4453
Pontiac 301-326-350-389-400-421-455 V8 - 62-79 (tall) (C) ...................................... 3.4" ........... #4457.............N/A

CRATE ENGINES

EFI

Installation Notes: Tall Profile are 1-1/4" taller than stock, and clear most aluminum roller rockers and valvetrain components
with moderate lift cams. Low Profile valve covers clear air-conditioning and alternator brackets. Signature Series Tall Profile
valve covers will not clear stud girdles due to breather baffle interference. Check clearance prior to purchase.
Small-Block Chrysler #4473

WATER PUMPS

Chevy 194-292 Inline 6 #4477

ACCESSORIES

Small-Block Ford #4460

Oldsmobile 350-455 #4485

NITROUS

Our push-on style valve cover breathers contain an effective filter which traps oil vapor and prevents
engine compartment contamination. Breathers come with rubber grommets and match our chrome
and black valve covers. Fits any 1-1/4" diameter valve cover hole. Available in two finishes; triple
chrome-plated with inscribed Edelbrock logo and textured black finish with a screen printed Edelbrock
logo for a modern look.
Chrome
Black
Round Breather l ..........................................................................................................#4405 ...................#4403
Round Breather with 90 PCV Port l ........................................................................#4410 ...................#4413

#4403

#4410

187

Pontiac 301-455 #4457

VALVE COVER BREATHERS

Ford 429/460 #4463

FUEL PUMPS
SPORTSWEAR
INDEX

Engineered for function and styled for great looks,

Signature Series valve covers have stock-style
breather baffles that prevent oil passage to the
PCV valve. These quality valve covers accept all
emissions equipment, including PCV valve holes.
Rubber grommets for the breather and PCV valve
holes are included. Matching breathers sold
separately. Available in two great finishes; triple
chrome-plated with stamped Edelbrock logo
and textured black finish with a screen printed
Edelbrock logo for a modern look.

#4405

(A) Will not fit turbo engine

(B) Will not fit 86 & later Vette aluminum heads
or 1987 and later Chevy cast iron heads

(C) Will not clear alternator on 1968 Firebird 400

(D) Will not clear 5.0L EFI intakes (except Victor #2945
and #3887) unless spacers on page 25 are used.

WWW.EDELBROCK.COM

CARBURETORS

ELITE II SERIES
AIR CLEANERS & VALVE COVERS

ACCESSORIES

Introducing the next generation of Elite Series accessories Elite II. This new line of accessories
features a design that is influenced by the original Elite Series originally released in 1985, but with a new
modern take on this classic look. They're made from heavy-gauge, die-cast aluminum and are finished
off with a show quality high luster polished finish. The raised fins are accented by a contrast gloss black
finish between the fins for the definitive Elite Series look.

ELITE II AIR CLEANER

Elite II Series
Air Cleaner #4266

Small-block Chevy Low Profile #4262

Select Edelbrock crate engines

feature Elite II valve covers
and air cleaner

SUPERCHARGERS

Small-block Chevy Tall Profile #4263

POWER PACKAGES KITS

Installation Notes: #4268 is stock height and requires spacer #8092 with electric choke carbs
or banjo fitting #8089 with manual choke carbs.

CAMSHAFT & VALVETRAIN

Elite II Series
Oval Air Cleaner #4272

Our Elite II round air cleaners fit all popular 5-1/8" diameter carburetors and include a black anodized
knurled nut. They come with a high-quality 3" pre-oiled, washable and reusable Pro-Flo Universal filter
with the exclusive Pro-Charge clean strip for easy maintenance and excellent filtration. Our oval air
cleaners are designed to fit Edelbrock single- and dual-quad applications and should clear HEI distributors
and stock parts. They come with high-quality 2-1/2" washable, pre-oiled reusable filter for excellent
filtration. Overall oval air cleaner dimensions are 13-5/8" x 7-3/16".

Overall Height Polished
14" Diameter with 3" Element, 3/8" Deeper Flange for all Edelbrock Carbs l.......3.125"................#4266
14" Diameter with 3" Element l......................................................................................3.125"................#4268
14" Replacement Round 3" Element Only.................................................................................................#43666
Oval with 2-1/2" Element for Edelbrock Dual-Quads Carbs l....................................3.50".................#4272
Oval with 2-1/2" Element for Single 4-Barrel Carburetor l........................................3.50".................#4273
Replacement Pro-Flo Oval 2-1/2" Element Only......................................................................................#1226

MANIFOLDS GASKETS CYLINDER HEADS

ELITE II SERIES AIR CLEANER & VALVE COVERS

Elite II Air Cleaners include the

exclusive air element with
Edelbrock Pro-Charge Strip

EFI
CRATE ENGINES

Big-block Chevy #4275

The Elite Series breather is die-cast aluminum with a foam element. Will not fit Elite Series valve covers
#4246, #4247 or #4252.
Push-in Style, Top-mounting (2-1/2" tall) l..............................................................................................#4204

188

INDEX

#4204

SPORTSWEAR

ELITE SERIES BREATHER

FUEL PUMPS

Ford FE #4277

Installation Notes: #4275 and #4277 are designed to clear most roller rockers on factory cast iron and Edelbrock
cylinder heads. They may also interfere with some factory accessory brackets and power brake boosters.
#4276 is designed to clear most roller rockers on factory cast iron and Edelbrock heads.
Footnotes:
(A) Some tall profile valve covers will interfere with air-conditioning compressors, EGR valves and power brake boosters.
(B) Will not fit 1986 & later Corvette aluminum heads or 1987 & later S/B Chevy cast iron heads.
(C) Will not fit 1986 & later 5.0L engines with stock or Edelbrock #3821, #7123 or #7126 EFI manifolds.

ACCESSORIES

Small-block Ford #4264

Our tall profile valve covers are 2" taller than stock, and clear most roller rockers and valvetrain components.
Our low profile valve covers clear all air-conditioning, alternator brackets and aluminum rockers. Overall
height is measured from gasket flange to top at the highest point.

Overall Height Polished
Chevy 262-400 V8 1959-86, Low Profile (B)........................................................................2.93"...............#4262
Chevy 262-400 V8 1959-86, Tall Profile (A,B) l................................................................4.40"...............#4263
Chevy Big-Block V8 1965 & Later........................................................................................3.00"...............#4275
Chrysler Big-Block 383/440..................................................................................................3.62"...............#4276
Ford 289/302/351W (except Boss) Tall Profile (A,C)........................................................3.70"...............#4264
Ford FE 1958-1976......................................................................................................................3.55"...............#4277

NITROUS

Big-block Chrysler #4276

WATER PUMPS

ELITE II VALVE COVERS

EMISSIONS GUIDE

l 50-STATE LEGAL l RACING ONLY l PRE-POLLUTION CONTROLLED VEHICLES l STOCK REPLACEMENT l ENGINE SWAP
PLEASE REFER TO PAGE 212 FOR MORE INFORMATION REGARDING THE EMISSIONS GUIDE.

CARBURETORS

RACING SERIES

ACCESSORIES AIR CLEANERS & VALVE COVERS

These new Racing Series accessories are the latest addition to our line of engine dress-up accessories.
Made from heavy-gauge, die-cast aluminum, these valve covers feature a sleek flat black textured finish
with diamond cut finish raised racing stripe and Edelbrock Racing logo. The modern high-tech look will
give any engine an aggressive look to match it's performance.

RACING SERIES AIR CLEANER

Racing
Series Air
Cleaner #41663

Fits all popular 5-1/8" diameter carburetors and includes a black anodized knurled nut. Includes a
high-quality 3" pre-oiled, washable and reusable Pro-Flo Universal Air Filter for excellent filtration.
Our Pro-Flo Universal Air Filters feature the exclusive Pro-Charge clean strip for easy maintenance.
Overall Height Part No.
14" Diameter with 3" Element, 3/8" Deeper Flange for all Edelbrock Carbs l.........3.125".............#41663
14" Replacement Round 3" Element Only .................................................................................................#43666

RACING SERIES VALVE COVERS

Small-block Chevy Low Profile #41633

Small-block Chevy Tall Profile #41643

SUPERCHARGERS

KITS POWER PACKAGES

CAMSHAFT & VALVETRAIN

CYLINDER HEADS GASKETS MANIFOLDS

RACING SERIES AIR CLEANER & VALVE COVERS

Our Tall Profile are 2" taller than stock, and clear most roller rockers and valvetrain components. Our Low
Profile valve covers clear all air-conditioning, alternator brackets and aluminum rockers. Overall height is
measured from gasket flange to top at the highest point. Match with billet breather #42133, see page 191.
Overall Height Part No.
Chevy 262-400 V8 1959-86, Low Profile (B) .........................................................................3.05" ............. #41633
Chevy 262-400 V8 1959-86, Tall Profile (A,B) l .................................................................4.51" ............. #41643
Ford 289/302/351W (except Boss) Tall Profile (A,C) ..........................................................3.70" ............. #41653
Installation Notes:
(A) Some tall profile valve covers will interfere with air-conditioning compressors, EGR valves and power brake boosters.
(B) Will not fit 1986 & later Corvette aluminum heads or 1987 & later S/B Chevy cast iron heads.
(C) Will not fit 1986 & later 5.0L engines with stock or Edelbrock #3821, #7123 or #7126 EFI manifolds.

Racing Series air cleaner and

valve covers are included
with all Edelbrock E-Street
Crate Engines

Racing Series Accessories feature a raised Edelbrock

Racing logo with a distinctive look

DON'T FORGET VALVE

COVER GASKETS AND
GASGACINCH!

See page 83 for Edelbrock engine gaskets and

Gasgacinch for a quality valve cover installation.

FUEL PUMPS

NITROUS

ACCESSORIES

WATER PUMPS

CRATE ENGINES

EFI

Small-block Ford #41653

INDEX

SPORTSWEAR

Racing Series Air Cleaners include

the exclusive air element with
Edelbrock Pro-Charge Strip

189

WWW.EDELBROCK.COM

CARBURETORS

CLASSIC SERIES
AIR CLEANERS & VALVE COVERS

ACCESSORIES

Classic AMC Valve Cover #4199

Classic Small-Block Chevy Valve Cover #4144

(A) Will not fit C-26 intake manifolds #5425, #54251, #54254 and #5426

Classic 348/409 W-Series Chevy Valve Cover #41403

POWER PACKAGES KITS

Classic Series Finned

Air Cleaner #4115 with
Polished Finish

Classic Series Chevy Valve Cover #4143

EFI

Classic B/B Chevy Valve Cover #41853

Classic Chrysler Small-Block LA Valve Cover #4176

Classic Series air cleaners

and valve covers are
manufactured in the USA
for unsurpassed quality
and performance

190

INDEX

PLEASE REFER TO PAGE 212 FOR MORE INFORMATION REGARDING THE EMISSIONS GUIDE.

SPORTSWEAR

l 50-STATE LEGAL l RACING ONLY l PRE-POLLUTION CONTROLLED VEHICLES l STOCK REPLACEMENT l ENGINE SWAP

FUEL PUMPS

EMISSIONS GUIDE

NITROUS

Installation Notes: May not clear some power brake boosters on Ford FE applications.

ACCESSORIES

Classic Pontiac Valve Cover #4130

Edelbrock first made these aluminum valve covers in the late 50s and theyre still a classic. Made of
heavy-gauge sand-cast aluminum, our classic finned valve covers are available in either a satin, polished
or durable black powder coated finish. Overall height is measured from base to top at the highest point.
Edelbrock classic valve covers can be machined to accept breathers if desired.
Overall Height
Satin Polished Black
AMC/Jeep 290-401 V8 1967-91 ....................................................3-3/8"................ #41999....... #4199.......#41993
Chevy 262-400 V8 1959-86 (no breather holes) l ...................3-1/2"................ #41459....... #4145.......#41453
Chevy 262-400 V8 1959-86 (with breather holes) .....................3-1/2"................ #41439....... #4143.......#41433
Chevy 262-400 V8 1959-86 (with oil fill hole) .............................3-1/2"................ #41449....... #4144.......#41443
348/409 W-Series Chevy ............................................................3-13/16".............. #41409....... #4140.......#41403
Chevy Big-Block V8 1965 & Later ..............................................3-1/2"................ #41859....... #4185.......#41853
Chrysler Small-Block LA 318-340-360.......................................3-3/4"................ #41769....... #4176.......#41763
Chrysler Small-Block Magnum..................................................3-3/4"................ #41779....... #4177.......#41773
Chrysler Big-Block 383/440 ............................................................ 4" ................... #41929....... #4192.......#41923
Ford 221351W V8 1962-95 l .....................................................3-3/4"................ #41609....... #4160.......#41603
Ford FE V8 1958-1976 (see note below) ........................................ 5" ................... #41629....... #4162.......#41623
Pontiac 301455 V8 1962-79 l ...................................................3-1/8"................ #41309....... #4130.......#41303

WATER PUMPS

CLASSIC SERIES VALVE COVERS

CRATE ENGINES

Classic Series
Finned Air Cleaner
#41179 with Satin Finish

Classic Ford FE Valve Cover #41623

SUPERCHARGERS

Classic Series Finned Air

Cleaner #41173 with Black
Powder Coated Finish

Classic Small-Block Ford Valve Cover #4160

CAMSHAFT & VALVETRAIN

This line of air cleaners were created to perfectly match our popular classic aluminum finned valve covers.
Three models for single or dual-quads give you plenty of options for that just right look on any nostalgic
rod or muscle car. Additionally, the small oval air cleaner provides adequate hood clearance in demanding
applications as well as a coordinated appearance with the classic finned look. They come with high-quality
2-1/2" washable, pre-oiled cotton gauze element for excellent filtration. These air cleaners work with all
popular 5-1/8" necks, for all carburetors or throttle bodies. Our Classic Series air cleaners are available in
either a satin, polished or durable black powder coated finish. See page 192 for replacement elements.
Overall Height
Satin Polished Black
Small Oval Cast Air Cleaner for Single
4-barrel Carb with 2.4" Element ll ........................................... 3.9" ................ #41159....... #4115.......#41153
Round Cast Air Cleaner for Single
4-barrel Carb with 3" Element ll .............................................. 3.9" ................ #41179....... #4117.......#41173
Large Oval Cast Air Cleaner for Dual-Quads
with 2.4" Element, 6-7/16" Center to Center (A) ll ................ 4.45" .............. #41199....... #4119.......#41193

MANIFOLDS GASKETS CYLINDER HEADS

CLASSIC SERIES AIR CLEANERS

VICTOR SERIES VALVE COVERS

Victor Small-Block Chevy Valve Cover #41733

Victor Small-Block Chevy Centerbolt Valve Cover #41723

Victor Big-Block Chevy Valve Cover #41813

SUPERCHARGERS

Victor Series
Air Cleaner
#41613

Victor Small-Block Ford Valve Cover #41253

Victor Small-Block Ford Valve Cover #41263

VICTOR SERIES AIR CLEANERS

Edelbrock Victor Series air cleaners feature a die-cast aluminum lid with a finely textured black powder
coated finish for a pleasing and unique appearance. This is the same finish youll find on our other Victor
Series accessories. These air cleaners work with all popular 5-1/8" carburetors or 4-bbl. throttle bodies and
includes a knock-out in the base for use with a crankcase ventilation adapter (sold separately on page 192).
They come with high-quality 3" washable, pre-oiled cotton gauze element for excellent filtration. Overall
height is measured from base to top at the highest point. See page 192 for replacement elements.

Overall Height
Black
Round Air Cleaner, 14" diameter with 3" element l...............................................3-1/8"....................#41613
Oval Air Cleaner, 11-7/8" x 8-1/4" with 2.4" element l...........................................3-3/4"....................#42203

Victor Series
Air Cleaner #42203

VALVE COVER BREATHERS

AVAILABLE IN POLISHED OR BLACK FINISH

Aluminum Breather #4407

Aluminum Breather #42133

Aluminum Racing
Breathers #4203

Circle Track
Breather #4420

INDEX

SPORTSWEAR

FUEL PUMPS

NITROUS

ACCESSORIES

WATER PUMPS

CRATE ENGINES

EFI

Our Victor Series valve covers have a finely textured black powder coated finish for a pleasing and unique
appearance. This is the same finish youll find on our top-of-the-line Edelbrock/Musi 555 Crate Engine.
These valve covers are manufactured from die-cast aluminum and machined with 1-1/4" breather hole.
Overall height is measured from base to top at the highest point.

Overall Height
Black
Chevy 262-400 1959-86, Low Profile............................................................................. 2.50".....................#41713
Chevy 262-400 1959-86, Tall Profile l......................................................................... 3.75".....................#41733
Chevy 262-400 1986-95 with Left Breather Hole - (centerbolt)................................ 2.50".....................#41723
Chevy 396-502 1965 & Later, Tall Profile..................................................................... 3.75".....................#41803
Chevy 396-502 1965 & Later, Low Profile.................................................................... 2.75".....................#41813
Ford 289/302/351W (except Boss), Low Profile (A)...............................................2.75"/3.90"................#41253
Ford 289/302/351W (except Boss), Tall Profile (A).................................................... 3.88".....................#41263
(A) Ford #41253 low profile measures 2.75" tall on the intake and 3.90" tall on the exhaust side;
#41263 tall profile measures 3.88" tall on the intake and 3.88" tall on the exhaust side.

KITS POWER PACKAGES

CAMSHAFT & VALVETRAIN

CYLINDER HEADS GASKETS MANIFOLDS

CARBURETORS

VICTOR SERIES

ACCESSORIES AIR CLEANERS & VALVE COVERS

191

Edelbrock Billet Aluminum Breathers #4213 and #42133 are a great way to finish off any engine bay. These
push-in style valve cover breathers contain a foam element that allows the engine to properly breathe
and traps oil vapor and prevents engine compartment contamination. They are available chrome or with
a black textured finish to match Edelbrock valve covers. Fits any 1-1/4" diameter valve cover hole. Racing
Breather #4203 is made from die-cast aluminum and is designed for competition use. It features a polished
finish with an etched Edelbrock script logo on top. Circle Track Breather #4420 is ideal for high-performance
competition applications. This push-in style breather is chrome finished and stamped with the Edelbrock
name. It has an oiled-cotton gauze washable element and screen that provides low restriction

Chrome Polished Black
Billet Aluminum Breather l............................................................ #4213.......................N/A.....................#42133
Billet Aluminum Breather with 90 PCV Port l.......................... #4407.......................N/A......................#4406
Aluminum Racing Breather (4-3/4" tall, 3-1/8" bolt space) l........N/A......................#4203...................... N/A
Circle Track Breather l.....................................................................N/A......................#4420...................... N/A

WWW.EDELBROCK.COM

CARBURETORS

COIL COVERS & MORE ACCESSORIES

FOR GM GEN III LS SERIES ENGINES

Edelbrocks sand cast aluminum LS Series Coil Covers are a great way to dress up the LS1 in your
street rod or muscle car. These coil covers are designed to eliminate the stock mounting brackets
on transplanted LS1 engines by way of fitting coils directly to the underside of the Edelbrock cover.
They are intended to create a clean under the hood custom appearance and will not fit stock vehicles.
These covers accept GM #12558948 coils or aftermarket equivalent replacement coils such as MSD #8245.

Satin Polished Black
Coil Covers for LS Series Engines......................................................#4118.....................#41181...................#41183
Installation Notes: For use on 1999-later factory GM center-bolt valve covers. Designed for street rod and muscle car
applications. Will not clear under-hood accessories on production vehicles.

Edelbrock LS series coil covers are

cast and machined in the USA

MANIFOLDS GASKETS CYLINDER HEADS

COIL COVERS

CAMSHAFT & VALVETRAIN

Coil Covers #41181 for LS Series Engines

Coil Covers #41183 for LS Series Engines

REPLACEMENT ELEMENTS
FOR EDELBROCK AIR CLEANERS

#1219

#4226

This kit mounts to the base of the air cleaner, providing a connection for the crankcase ventilation
breather hose from the valve cover with Edelbrock air cleaners #1207, #1221, #1223 and aluminum air
cleaners #4207, #4221, #4266 and #41663. This kit includes a hose connector and hardware.
PCV Hose Connection Kit ll....................................................................................................................#1205

WING BOLTS AND HOLD-DOWN TABS

#4414

OIL FILL HOLE PLUGS

#4415

EMISSIONS GUIDE

PLEASE REFER TO PAGE 212 FOR MORE INFORMATION REGARDING THE EMISSIONS GUIDE.

192

INDEX

l 50-STATE LEGAL l RACING ONLY l PRE-POLLUTION CONTROLLED VEHICLES l STOCK REPLACEMENT l ENGINE SWAP

SPORTSWEAR

#4427

Designed to plug the oil fill hole on any of Edelbrocks Signature Series valve covers
or any 1-1/4" diameter fill hole on similar designs.
Chrome Oil Fill Hole Plug............................................................................................................................#4415
Rubber PCV Valve Grommets (pair)............................................................................................................#8094

FUEL PUMPS

#4402

NITROUS

#4400

ACCESSORIES

#1205

Universal valve cover hold-down kits may be used on all Edelbrock and similar design chrome valve
covers, our Elite Series and Elite II valve covers, our Classic Series valve covers and our Victor Series
valve covers. All hold-down kits have 4 items per pack, except #4414, #4427 and #44273.

Chrome Black
2-piece Wing Bolts with T-Top (3-3/4" long, 4 pieces)..............................................#4400......................N/A
2-piece Wing Bolts with T-Top (4-1/4" long, 2 pieces)..............................................#4401......................N/A
1-piece Wing Bolts with T-Top (5" long, 2 pieces)....................................................#4402....................#44023
Hold-down Tab Kit (small-block Chevy, 4 pieces)......................................................#4404......................N/A
Hold-down Tab Kit (small-block Chevy, 4 pieces, 5" long)........................................#4426....................#44263
Hold-down Tab Kit (big-block Chevy, 7 pieces, 5" long)............................................#4414....................#44143
Hold-down Tab Kit (universal, 8 pieces, 1.5" long).....................................................#4427....................#44273

WATER PUMPS

#1220

CRANKCASE VENTILATION
HOSE CONNECTION KIT

CRATE ENGINES

#1218

EFI

#1217

SUPERCHARGERS

#1216

To keep your engine running clean, choose from replaceable paper elements or our premium pre-oiled
cotton gauze elements for a lifetime of service. We recommend #1216 as an upgrade for any Edelbrock
14" diameter air cleaner.
3" tall, 14" diameter for #4123, #41613 & #41173 (pre-oiled reusable element)...................................#1216
3" tall, 14" diameter for #1207, #1221, #1223, #4207 & #4221 (paper element).....................................#1217
2-1/2" tall, 10" diameter for #1208 & #1203 (paper element)...................................................................#1218
2-1/2" tall, 6-3/8" diameter for #1209 & #1210 (paper element)..............................................................#1219
Oval filter element for #1235, #1236, #4235, #4236 & #4237 (pre-oiled reusable element).................#1220
Triangular filter element for #1222 & #4222 (pre-oiled reusable element)..........................................#4226

POWER PACKAGES KITS

Coil Covers #4118 for LS Series Engines

CARBURETORS

ACCESSORIES

CYLINDER HEADS GASKETS MANIFOLDS

PRO-FLO UNIVERSAL AIR FILTERS

CAMSHAFT & VALVETRAIN

Edelbrock's Pro-Flo Universal Air Filters are an economical way to ensure your engine is getting clean air,
without the expense of buying a new filter every few thousand miles. They are constructed for superior
filtration and air flow performance. They also feature the Edelbrock exclusive Pro-Charge clean strip for
easy maintenance. The Pro-Charge strip will let you know when its time to clean your filter. Each filter is
washable and reusable. Use Edelbrock Pro-Charge Cleaning Kit #43600 to clean and re-oil.
The Pro-Flo Universal Fit Conical Series features triple chrome plated trim for a show-quality look.
They are also designed with three inlet adapter rings for use on 3", 3.5" and 4" inlet tube systems.
Available in black, red, white and blue to complement any engine bay.
Our Pro-Flo 14" round air cleaners feature a high flow element top and are designed to be used with
all popular 5-1/8" diameter carburetors. In testing, the high flow element top delivered improved
performance over a traditional air cleaner top. Available in black with black trim, red with chrome
trim and blue with chrome trim.
4 Intake
Systems

Pro-Charge Strip
Patent pending
technology informs
you when its time to
clean your reusable
air filter.

CONICAL AIR FILTERS

Description
Pro-Flo Valve Cover Breather with 9mm Inlet
Pro-Flo Cone Air Filter with 3" Inlet and Red Element
Pro-Flo Universal Fit Compact Cone Air Filter
Pro-Flo Universal Fit Medium Cone Air Filter
Pro-Flo Universal Fit Tall Cone Air Filter

3-1/2 Intake
System
3 Intake
Systems

HP Range Length Width

2.5"
2"
250-370
6.5"
6"
240-340
3.7"
6"
330-470
6.7"
6"
350-500
10"
6"

Emissions Code
lll
lll
lll
lll
lll

Black
#43510

#43610
#43640
#43690

Compact Air Filter Black #43610

Medium Air Filter Red #43641

Red
#43511
#43651
#43611
#43641
#43691

White
#43512

#43612
#43642
#43692

Blue
#43513

#43613
#43643
#43693

Valve Cover Breather #43512

Medium Air Filter #43651

ROUND AIR CLEANERS

Description
Pro-Flo High-Flow 14" Round Air Cleaner with Chrome Trim
Pro-Flo High-Flow 14" Round Air Cleaner with Black Trim
Pro-Flo High-Flow 14" Round Air Cleaner Element Only

Width

Height

14"
14"
14"

3"
3"
3"

Tall Air Filter Blue #43693

Emissions Code
lll
lll

Black

Red

Blue

#43662
#43668

#43660

#43666

#43661

#43667

INDEX

SPORTSWEAR

FUEL PUMPS

NITROUS

ACCESSORIES

WATER PUMPS

CRATE ENGINES

EFI

SUPERCHARGERS

KITS POWER PACKAGES

PRO-FLO UNIVERSAL AIR FILTERS

ACCESSORIES
Description
Pro-Charge Air Filter Cleaning Kit
Pro-Charge Air Filter Cleaner (12 qty - 10.14 oz bottles)
Pro-Charge Air Filter Oil (12 qty - 10.14 oz bottles)
E Logo Black Anodized Round Nut
E Logo Black Anodized Round Nut with Machined "E"
Black Anodized Knurled Round Nut

Part-No.
#43600
#43601
#43602
#4270
#4271
#4209

#4270

#4271
Cleaning Kit #43600

193

WWW.EDELBROCK.COM

CARBURETORS

PRE-ASSEMBLED NITROUS MANIFOLDS

AND PERFORMER PLATE SYSTEMS

NITROUS

Edelbrock Nitrous Systems are calibrated to deliver safe and accurate horsepower gains with even distribution to all cylinders. Dyno-testing determines calibrations,
not simple mathematical formulas, which dont take into account real-world variables. Available from 20 to 500+ hp, Edelbrock Nitrous Systems are the quickest and
easiest way to get large horsepower gains with minimum modifications and expense. With the Performer and Performer RPM Line, you get a 50 to 250 horsepower
increase at the flip of a switch with an installation time of approximately four hours. Performer RPM II systems include high-flow solenoids and stainless steel spray
bars for 400+ hp capability. Victor Jr. racing systems produce serious horsepower with jetting supplied from 100 to 500+ horsepower. At the extreme level, we have
the Edelbrock Series E1, Series E2, Series E3 and M3 Series Direct-Port systems which yield a huge gain of up to 500+ hp!

CARB/PLATE SYSTEMS
Nitrous Systems

Injector/Plate Type

Solenoids (Qty)

Nitrous Bottle

Brackets

50-75-100
100-150-175-200-250
100-150-175
100-150-200-250
75-250
100-250
100-150-200-250
200-400+
100-400+
200-400+
100-500

Square-bore or Spread-bore
Square-bore
Spread-bore
4500 Series
Square-bore
4500 Series
Square-bore or 4500 Series
Square-bore or 4500 Series
Square-bore or 4500 Series
Square-bore or 4500 Series
Square-bore or 4500 Series

Performer (2)
Performer RPM (2)
Performer RPM (2)
Performer RPM (2)
Performer (2), Perf. RPM (2)
Performer (2), Perf. RPM (2)
Victor Pro (1), Perf. RPM (1)
Victor Pro (2)
Victor Pro (2), Perf. RPM (2)
Performer RPM (4)
Performer RPM (4)

10 lb. Powder Coated or Polished

10 lb. Powder Coated or Polished
10 lb. Powder Coated or Polished
10 lb. Powder Coated or Polished
10 lb. Powder Coated
10 lb. Powder Coated
10 lb. Powder Coated or Polished
10 lb. Powder Coated
10 lb. Powder Coated
10 lb. Powder Coated
10 lb. Powder Coated

Hinged Steel
Hinged Steel
Hinged Steel
Hinged Steel
Hinged Steel
Hinged Steel
Hinged Steel
Hinged Steel
Hinged Steel
Hinged Steel
Hinged Steel

DIRECT PORT SYSTEMS

Nitrous Systems

200-300-400-500
200-300-400-500

56
56

200-300-400-500

56

300
300

16
16

Nozzles

Solenoids
Nitrous/Fuel

Wiring
Distribution Harness
Blocks
& Relays

Bottle &
Brackets

E1 Aluminum, 1/8" NPT (8) Victor Pro (2) / Victor Pro (2) 1/8" NPT 5-port (4) Included Sold Separately
E2 Stainless Steel, 1/16" NPT (8) Victor Pro (2) / Victor Pro (2) 1/8" NPT 5-port (4) Included Sold Separately
E3 Titanium, 1/16" NPT (8)

Victor Pro (2) / Victor Pro (2) 1/8" NPT 5-port (4) Included Sold Separately

E2 Stainless Steel, 1/16" NPT (8) Victor Pro (2) / Victor Pro (2) 1/8" NPT 5-port (4)
E3 Titanium, 1/16" NPT (8) Victor Pro (2) / Victor Pro (2) 1/8" NPT 5-port (4)

Sold Separately
Sold Separately

READY TO BOLT-ON, RIGHT-OUT-OF-THE-BOX!

194

INDEX

PLEASE REFER TO PAGE 212 FOR MORE INFORMATION REGARDING THE EMISSIONS GUIDE.

SPORTSWEAR

l 50-STATE LEGAL l RACING ONLY l PRE-POLLUTION CONTROLLED VEHICLES l STOCK REPLACEMENT l ENGINE SWAP

FUEL PUMPS

EMISSIONS GUIDE

NITROUS

PERFORMER PLATE KITS (50-100 HP)

Performer Plate Kits are an easy way to upgrade your existing system with Edelbrock Nitrous. Each kit
includes plate, stainless steel jet assortment, and braided stainless steel fuel and nitrous lines.
Square-bore Carburetors (50-75-100 HP) l ............................................................................................#70011

ACCESSORIES

SINGLE-STAGE (50-100 HP)

Designed to be the best carb/plate kits available, Edelbrock kits include more jets than other brands
giving you greater tuneability. Our spray bars are precision machined on an EDM machine instead
of standard drilling, giving you the best flow characteristics available. Performer single-stage nitrous
systems are designed for use on carbureted V6 and V8 engines. Power increases can be adjusted from
50-100 horsepower. Edelbrock nitrous systems are simple to install with a 1/2" thick aluminum plate that
fits between the carb and the intake manifold.
Silver Bottle
Square-bore Carburetors (50-75-100 HP) l ............................................................................................#70001
Spread-bore (Q-Jet) Carburetors (50-75-100 HP) l ..............................................................................#70002

WATER PUMPS

Nitrous System #70001

PERFORMER NITROUS PLATE SYSTEMS

CRATE ENGINES

Pre-assembled
system #72975

Are you looking to build a nitrous system for your high performance vehicle, but dont have the time or
expertise to plumb an intake manifold? Now you can purchase a high-quality Edelbrock intake manifold
with a direct port nitrous system pre-assembled and ready to install right out-of-the-box. These systems
are compatible with any 4150 flange carburetor. They include an Edelbrock Victor Jr. intake manifold,
Performer Series fuel and nitrous solenoids, distribution blocks and high flow lines with E2 Series nozzles.
These systems are capable up to 300 additional horsepower. All the supply hard lines have been plumbed to
deliver optimal nitrous and fuel flow on various applications. Kits include jetting for 100 and 150 horsepower.
These systems do not include the bottle or supply lines. Visit www.edelbrock.com to see a complete listing
of nitrous accessories to finish off your installation.
Victor Jr. for Chevrolet 262-400 small-block l ........................................................................................ #72975
Super Victor for Chevrolet 262-400 small-block l .................................................................................. #72925
Victor Jr. 454-R for Chevrolet 396-502 big-block l.................................................................................. #72902

EFI

INTAKE MANIFOLDS WITH PRE-ASSEMBLED

DIRECT PORT NITROUS SYSTEM

SUPERCHARGERS

Super Victor Direct Port Kit for V8 (E1)

Super Victor Direct Port Kit for V8 (E2)
Super Victor Direct Port Plumb Kit for
V8 (E3)
Custom Manifold Plumb Kit for V8 (E2)
Custom Manifold Plumb Kit for V8 (E3)

Qty. Jets
Hp Added Included

POWER PACKAGES KITS

Hp Added

CAMSHAFT & VALVETRAIN

Performer
Performer RPM
Performer RPM
Performer RPM
Performer RPM Dual-Stage
Performer RPM Dual-Stage
Performer RPM Dual-Quad
Performer RPM II
Performer RPM II Dual-Stage
Victor Jr.
Victor Jr. Dual-Stage

MANIFOLDS GASKETS CYLINDER HEADS

EDELBROCK NITROUS SYSTEM CONFIGURATIONS AND FEATURES

CARBURETORS

FORD EFI DRY SYSTEMS

(80 HP)
Performer EFI Nitrous Systems are the best way to get a major power increase in your fuel injected
late-model street machine. These systems work with your stock ECU for a simple installation.
Performer EFI Dry Nitrous Systems supply nitrous directly into the intake stream, and the extra
fuel is supplied through the OE injectors by raising the fuel pressure or changing the duty cycle.
1986-95 Mustang 5.0L & 1996-98 4.6L (80 HP) l ....................................................................................#70400

PERFORMER RPM NITROUS PLATE SYSTEMS

Performer EFI Nitrous System #70400

PERFORMER RPM UPGRADE KITS (100-150-175-200-250 HP)

Upgrade Kits include everything needed to upgrade Performer nitrous systems to a Performer RPM
system includes plate, solenoids, jets and all hardware.
Performer RPM Square-bore Upgrade Kit (100-150-175-200-250 HP) l .........................................#70021

EFI
CRATE ENGINES

(DUAL-QUAD) (100-250 HP)

Performer RPM single-stage nitrous systems are designed for use on carbureted V8s with dual-quad
square-bore carburetors. The solenoids are larger than our Performer systems and power increases
can be adjusted from 100-250 horsepower. Edelbrock Nitrous Systems are simple to install with two
1/2" thick aluminum plates that fit between the carburetors and the manifold.
Performer RPM Square-Bore Carbs Dual-Quad (100-250 HP) silver powder coated bottle l ......#70090

PERFORMER RPM II NITROUS PLATE SYSTEMS

WATER PUMPS

SINGLE- OR DUAL-STAGE

Performer RPM Dual-Quad Kit #70090

Performer RPM II Nitrous Carb/Plate Systems are available in single- or dual-stage configurations for
power gains from 200 to 400+ horsepower. Performer RPM II Single-Stage systems are designed for use
on carbureted V8 engines. Performer RPM II Dual-Stage systems are designed for those who want to add
power in stages to soften the hit of the nitrous system to control excessive tire spin or violent chassis
reaction. Both kits feature Victor Pro fuel solenoids and Victor Pro bottom discharge nitrous solenoids
for enhanced flow capacity. The 1/2" thick aluminum spray bar plate fits between the carburetor and the
intake manifold and features stainless steel spray bars with more discharge holes than Performer RPM
systems for more flow and superior atomization.
Single-Stage
Dual-Stage
Silver Bottle
Silver Bottle
Square-bore Carburetors (200-400+ HP) l ................................................................#70080 .................#70082
4500 Series Carburetors (200-400+ HP) l ..................................................................#70081 .................#70083

VICTOR JR. NITROUS PLATE SYSTEMS

NITROUS

ACCESSORIES

(100-150-175-200-250 HP)
Performer RPM Plate Kits are an easy way to upgrade your existing system to Edelbrock Performer RPM spec.
Each kit includes plate, stainless steel jet assortment, and braided stainless steel fuel and nitrous lines.
Square-bore Carburetors (100-250 HP) l ............................................................................................#70060
Spread-bore (Q-Jet) Carburetors (100-175 HP) l...............................................................................#70061
4500 Series Carburetors (100-250 HP) l ..............................................................................................#70063

PERFORMER RPM NITROUS CARB/PLATE KITS

SUPERCHARGERS

KITS POWER PACKAGES

Performer RPM Nitrous

System #70050

FUEL PUMPS
SPORTSWEAR

SINGLE-STAGE (100-250 HP)

Performer RPM single-stage nitrous systems are designed for use on carbureted V8s. The solenoids
are larger than our Performer systems and power increases can be adjusted from 100-250 horsepower.
Edelbrock Nitrous Systems are simple to install with a 1/2" thick aluminum plate that fits between the
carburetor and the intake manifold.
Silver Bottle
Polished Bottle
Square-bore Carburetors (100-150-175-200-250 HP) l ................................. #70050 ........................#70033
4500 Series Carburetors (100-150-200-250 HP) l........................................... #70053 ...........................N/A
PERFORMER RPM PLATE KITS

Performer RPM 4500 Series Plate Kit #70063

INDEX

PLATE SYSTEMS

EFI NITROUS SYSTEMS

CAMSHAFT & VALVETRAIN

CYLINDER HEADS GASKETS MANIFOLDS

NITROUS

Performer RPM II
Nitrous System #70080

195

SINGLE-STAGE (200-400 HP)

These systems feature four nitrous and four fuel jets, offering more tuning capabilities than any plate
system currently available. The efficient design, with a billet aluminum plate thats only 11/16" thick,
uses less nitrous than conventional plate systems at the same power levels. Dyno tests on a 500-inch
Chevy proved at 400 HP jetting, EGTs varied less than 5% from cylinder-to-cylinder. Additional features
include shorter spray bars that inject more liquid nitrous into the intake for more equal distribution across
the plenum, more balanced air/fuel ratio and a quicker response time. Kits include everything shown
to the left including a 10-lb. nitrous bottle (shipped empty), stainless steel jet selection, hardware and
installation/owners manual.
Silver Bottle
Square-bore Carburetors (200-300-400+ HP) l ......................................................................................#70056
WWW.EDELBROCK.COM

CARBURETORS

DIRECT PORT SYSTEMS NITROUS

CHOICE OF FIVE NOZZLE DESIGNS
M3
DUAL-STAGE

(Single) #72550
(Set of 8) #72560

Constructed from lightweight

aluminum and black
anodized. Features a unique
fuel passage design for
extremely high atomization,
Direct bolt-on upgrade for
other brands that use a 90
1/8" NPT design.

E3 SERIES:

Features an exclusive titanium

construction. The StraightShot configuration produces
excellent fuel atomization.
Direct upgrade for other brands
that use a 1/16" NPT annular
(Single) #72553 discharge design.

(Set of 8) #72563

SS DRY SERIES:

E2 SERIES:

(Single) #72552
(Set of 8) #72562

Designed with noted drag

racer Billy Glidden and
features a durable stainless
steel construction. Direct
bolt-on upgrade for other
brands that use a 90 1/16"
NPT design.

(Single) #72556

Constructed from durable

stainless steel. Nitrous only
nozzle for use with Electronic
Fuel Injection. Direct upgrade
for other brands that use a 90
1/16" NPT dry design.

UNIVERSAL

ACCESSORIES

Victor Pro bottom exit nitrous solenoids for improved flow characteristics
1/16" NPT nozzle size for a compact installation
Choice of E2 stainless steel or unique E3 titanium Straight-Shot

DIRECT PORT V8 RE-PLUMB KIT

EMISSIONS GUIDE

PLEASE REFER TO PAGE 212 FOR MORE INFORMATION REGARDING THE EMISSIONS GUIDE.

196

INDEX

l 50-STATE LEGAL l RACING ONLY l PRE-POLLUTION CONTROLLED VEHICLES l STOCK REPLACEMENT l ENGINE SWAP

SPORTSWEAR

This kit is intended for racers who have a Victor Direct Port Kit, and want to transfer it to a different
intake manifold. This kit provides everything needed without the hassle of having to buy each
component individually.
Direct Port Re-Plumb Kit l.......................................................................................................................#71880

FUEL PUMPS

E2 Nozzle
E3 Nozzle
Custom Manifold V8 Plumb Kit (200-500+ HP) l ......................................................#71851 .................#71853

NITROUS

nozzles for better nitrous and fuel delivery

Billet distribution blocks with hard lines for many different tight fit options
16 stainless steel jets for longevity and tighter tolerances (8 each of 2 sizes)

Super Victor V8 Direct Port #71848

WATER PUMPS

CUSTOM PLUMBING KITS (200-500+ HP)

Developed with racers in mind, this kit contains the very basics for a direct port nitrous system
installation on an existing manifold. This kit is for racers who already have their wiring done, or who
want to configure their wiring to custom specifications. This helps keep the cost down while still giving
you all of the outstanding features of an Edelbrock Direct Port Nitrous Kit with either our stainless steel
E2 nozzles or our unique E3 titanium Straight-Shot nozzles. Supplied with 300 horsepower jetting.

CRATE ENGINES

Super Victor 8-Cyl Direct Port E3 Nozzle #71852

(100-500+ HP)
This kit includes E3 Nozzles, (2) Victor Pro N20 solenoids, (2) Performer fuel solenoids, billet distribution
blocks, hard line and hardware. For custom fabrication; consult your nitrous plumbing expert.
E3 Nozzle
Super Victor V8 Direct Port l ..................................................................................................................#71848

EFI

FOR CUSTOM APPLICATIONS

SUPERCHARGERS

(200-500+ HP)
Our most sophisticated nitrous system allows you to tune each individual cylinder for superior performance!
Utilizing your choice of either Edelbrock E1, Edelbrock/Glidden E2 stainless steel, or E3 Straight-Shot
titanium nitrous nozzles, this is a direct port kit designed for serious competition with power increases of
200-500+ hp. They include Victor Pro Bottom Exit nitrous solenoids and Victor Pro fuel solenoids for improved
flow characteristics. Match with an Edelbrock Bottle Kit for maximum race-level performance with the
bottle/bracket combination you want. Kits include 56 stainless steel jets, 8 each of 7 sizes.
E1 Nozzle
E2 Nozzle
E3 Nozzle
Super Victor 8-cyl. Direct Port (200-300-400-500+ HP) l ...........#71831 ..................#71850 ................#71852

POWER PACKAGES KITS

SUPER VICTOR DIRECT PORT NITROUS SYSTEMS

CAMSHAFT & VALVETRAIN

(Single) #72557
(Set of 8) #72567

Designed and developed in

conjunction with 8 time
Pro Street World Champion
Pat Musi. The M3 Dual-Stage
Dry Nitrous Nozzle is the
latest in direct port nitrous
technology for use in 1,000+
horsepower multi-stage nitrous
drag racing applications.
Titanium construction makes
this the strongest and simply
best nozzle available for this
application. 1/16" NPT threads
make this an easy upgrade for
existing nitrous systems.

E1 SERIES:

MANIFOLDS GASKETS CYLINDER HEADS

DIRECT PORT NITROUS NOZZLES

CARBURETORS

NITROUS

CYLINDER HEADS GASKETS MANIFOLDS

PROGRESSIVE NITROUS CONTROLLER

The Edelbrock Progressive Nitrous Controller offers complete control over your nitrous system in a
powerful and compact package. Pulse width modulation regulates the amount of Nitrous being delivered
over a specified period of time by the nitrous and fuel solenoids. The digital display is easy to read and
very simple to program, thanks to touch switch programming. You have the ability to select and individually
program the nitrous parameters that you need in order to optimize traction, control your chassis and ramp
up your nitrous system safely. The end result leads to quicker ETs and lessens the risk of engine and
chassis abuse. The compact controller is also great for automotive and motorcycle applications.

Quicker ET's and less risk of engine

and chassis abuse

CAMSHAFT & VALVETRAIN

Progressive
Nitrous Controller #71900

10-lb. Polished
#72400

KITS POWER PACKAGES

Brackets #72600 for

10- and 15-lb bottles

SUPERCHARGERS
EFI
CRATE ENGINES

Brackets #76204 for

10- and 15-lb bottles

the amount of nitrous being delivered over

specified time
Select and individually program nitrous

parameters to optimize traction and

chassis control

Integrated battery voltage monitor

Progressive Nitrous Controller l ............................................................................................................#71900

ALUMINUM NITROUS BOTTLES

These nitrous bottles come with the Racer Safety Blow-Off Adapter and a liquid-filled nitrous pressure
gauge pre-installed. This is a popular item for the racing community since many associations require
the use of a Racer Safety Adapter if the bottle is installed in the passenger compartment.
10-lb. Silver Powder Coated Bottle (with Racer Safety Adapter & Liquid-filled Gauge) l ............#72311
15-lb. Silver Powder Coated Bottle (with Racer Safety Adapter & Liquid-filled Gauge) l ............#72315
Replacement Pressure Relief Disks (10, 12.5, 15 & 20 lb. bottles) (qty. 2) l .....................................#72900

HINGED STEEL BRACKETS

Powder coated and made of steel, these hinged brackets are designed for use with Edelbrock or other
brands of 10- and 15-lb., 7" diameter aluminum bottles. Includes rubber isolators to protect the finish.
Red Hinged Steel Brackets (for 10-lb. and 15-lb. aluminum bottles) l ..............................................#72600
Grey Hinged Steel Brackets (for 10-lb. and 15-lb. aluminum bottles) l ............................................#76204

Racer Safety Blow-Off Adapter

#72961 includes a diffuser
cap for safer handling
when bottle is
not mounted

ACCESSORIES

WATER PUMPS

Non-volatile data memory retains your settings

+12-volt timer output for auxiliary output
Complete with wiring harness and manual
Single or dual ramp adjustable
from 0 to 9.999 seconds
NITROUS
Full digital circuitry with
MADE
easy to read LCD display
BETTER
Epoxy potted for durability

BOTTLES WITH RACER SAFETY ADAPTER AND GAUGE

NITROUS BLOW-DOWN TUBE, RACER SAFETY

BLOW-OFF ADAPTER & SAFETY VALVE

Nitrous Blow-Down Tube #72960

FUEL PUMPS

NITROUS

Utilizes pulse width modulation to regulate

Edelbrock nitrous bottles are made of aluminum alloy, are D.O.T. approved and include an Edelbrock highflow CGA approved valve with a built-in siphon tube (unless noted otherwise) for consistent performance.
Edelbrock bottles are available polished to a high luster. They include a pressure venting system to prevent
pressure increases beyond the safety level. Note: All bottles are shipped empty.
Gauge
Dimensions
Silver
Polished
Capacity
Included
(len. x dia.)
Bottle
Bottle
10-lb. l .........................................................................No.................20" x 6-7/8" ..............#72300 ............... #72400

Nitrous Power
Panel for 1987-97
Mustangs #72283

SPORTSWEAR
INDEX

ACCESSORIES

197

CNC-machined Racer Safety Blow-Off Adapter replaces the standard safety valve to allow the use of a hard
line blow-down tube. A blow-down tube safely vents nitrous outside the car should the safety blow. This is
an essential safety feature for hatchbacks or cars with the bottle mounted in the passenger compartment.
Nitrous Blow-Down Tube (22" long) l....................................................................................................#72960
Racer Safety Blow-Off Adapter (for use with Blow-Down Tube) l ...................................................#72961

NITROUS POWER PANEL FOR 1987-97 MUSTANGS

Perfect for street or strip, this brushed aluminum power panel hides in the ashtray of your Mustang.
It contains the highest quality switches available, plus high-temp TXL wire for maximum durability
and performance. Fully fused and insulated.
Nitrous Power Panel (for 1987-97 Mustangs) l ....................................................................................#72283

WWW.EDELBROCK.COM

CARBURETORS

ACCESSORIES NITROUS
Keeps the supply of fresh liquid nitrous at the solenoid(s) for instant and repeatable nitrous injection.
This purge kit bleeds accumulated nitrous vapor from the supply lines. Includes solenoid, activation
switch, filter, aircraft-quality fittings and wiring.
-4AN Purge Valve Kit l .............................................................................................................................#72176
-6AN Purge Valve Kit l .............................................................................................................................#72178

EDELBROCK SOLENOIDS

6AN Purge Valve Kit #72178

#72000

SOLENOID REBUILD KITS

BOLT-ON SOLENOID BRACKETS

#72280

#72282

EMISSIONS GUIDE

PLEASE REFER TO PAGE 212 FOR MORE INFORMATION REGARDING THE EMISSIONS GUIDE.

198

INDEX

l 50-STATE LEGAL l RACING ONLY l PRE-POLLUTION CONTROLLED VEHICLES l STOCK REPLACEMENT l ENGINE SWAP

SPORTSWEAR

Jets are available individually or in packs of 8. To order individually packed jets,

add the jet size desired to #73 (#73014 is a .014" jet).
Individual Taper Face Jets (Last 3 digits indicate size, .014" thru .120") l ....................#73014 thru #73120
Packs of 8 Taper Face Jets (Last 2 digits indicate size, .018" thru .048") l....................#73218 thru #73248
Individual Taper Face Jets (Undrilled blank) l......................................................................................#73013

FUEL PUMPS

Precision CNC-machined
stainless steel jets wont
erode like brass jets

REPLACEMENT JETS

NITROUS

#72285

#72284

ACCESSORIES

#72281

Designed especially for Edelbrock, Barry Grant and Holley carburetors, these kits include a snap-action
microswitch, mounting hardware and a CNC-machined, red anodized billet aluminum bracket.
#72279 comes with a bendable universal bracket for easy installation.
Microswitch with Universal Bracket l ................................................................................................#72279
For Edelbrock Performer and Thunder Series AVS Carburetors l ..................................................#72280
For Holley 4500 Series Carburetors l ....................................................................................................#72281
For Holley Standard-flange Carburetors without Choke (will not fit H.P. series) l .......................#72282
Holley HP Series Bracket Kit l ...............................................................................................................#72277
For Barry Grant Race Demon Carburetors l.........................................................................................#72284
For Barry Grant King Demon Carburetors l..........................................................................................#72285
Lighted Toggle Switch l ..........................................................................................................................#72271
Covered Toggle Switch l .........................................................................................................................#72272
Miniature Lighted Rocker Switch l.......................................................................................................#72273
Push Button Switch l ...............................................................................................................................#72274

WATER PUMPS

SWITCHES AND BRACKETS

#72279

CRATE ENGINES

Two-Solenoid Bracket
#72289 for square-flange carbs

EFI

Billet aluminum, CNC-machined plate for two- or four-solenoid applications. Two-Solenoid brackets
can be used with Performer and Performer RPM systems for a professional-looking installation.
Match the four-solenoid bracket with our Performer RPM Dual-Stage, or Victor Jr. Plate System.
2-Solenoid
4-Solenoid
Bracket
Bracket
4500 Series Carbs l ......................................................................................................#72288 .................#72286
Square-flange (4150) Carbs l .....................................................................................#72289 .................#72287
Solenoid Adapter
(Required for Performer Solenoids when used with the above brackets) l .........#72294 .................#72294

SUPERCHARGERS

Edelbrock nitrous and fuel solenoid rebuild kits contain everything needed to rebuild the internal
components including a specialty wrench.
Performer Nitrous Solenoid Repair Kit l ..............................................................................................#72200
Performer RPM Fuel Solenoid Repair Kit l ..........................................................................................#72203
Victor Pro & Performer RPM Nitrous Solenoid Repair Kit l.............................................................#72219

POWER PACKAGES KITS

Solenoid Rebuild
Kit #72200

CAMSHAFT & VALVETRAIN

#72052

#72001

Designed for Edelbrock nitrous systems, these stainless steel solenoids have a very low amp draw.
They feature a stainless steel base for corrosion resistance and tighter tolerances, a low currentconsumption coil, a Teflon plunger for reliability and longevity, and a powder coated coil cover for
durability and appearance. The Victor Pro nitrous solenoid features a bottom outlet design that restricts
flow much less then standard designs. A .115" internal metering orifice makes this our highest flowing
nitrous solenoid. The Victor Pro fuel solenoid features a shorter body with a smaller diameter stainless
steel base for use where space is limited.
Nitrous Solenoids - Amp Draw: 9.2 amps @ 12.6 volts and 11 amps @ 13.8 volts
Performer Nitrous Solenoid (up to 150 HP with 1/8" NPT inlet & outlet) l........................................#72000
Performer RPM Nitrous Solenoid (400+ HP with 1/4" NPT inlet & 1/8" NPT outlet) l......................#72001
Victor Pro Bottom Exit Fuel Solenoid (500+ HP with 1/4" NPT inlet & 1/8" NPT outlet) l ...........#72002
Fuel Solenoids - Amp Draw: 1.29 amps @ 12.6 volts and 1.5 amps @ 13.8 volts
Performer Fuel Solenoid (up to 175 HP at 6 PSI with 1/8" NPT inlet & outlet) l...............................#72050
Performer RPM Fuel Solenoid (400+ HP at 6 PSI with 1/4" NPT inlet & 1/8" NPT outlet) l.............#72051
Victor Pro Small Base Fuel Solenoid (500+ HP at 6 PSI with 1/8" NPT inlet & outlet) l ............#72052

MANIFOLDS GASKETS CYLINDER HEADS

PURGE VALVE KITS

CARBURETORS
CYLINDER HEADS GASKETS MANIFOLDS

Replacement Jet
Kit #73001

SUPERCHARGERS

Super Victor Jet

Pack #73012

This kit was developed for the Super Victor Direct Port Nitrous System
and includes 56 jets, 8 each of .020", .024", .028", .032", .036", .040",
and .044". Edelbrock CNC-machined stainless steel jets won't erode like
brass jets and maintain precise dimensions for accurate and safe hp gains.
Use this kit to fine tune your nitrous system for maximum performance.
Will also work with most other brands of nitrous systems (except NX).
Super Victor Direct Port Jet Pack l .................................................#73012

REPLACEMENT SOLENOID BRACKETS

For Performer RPM Nitrous/Fuel/Alcohol and Victor Pro Nitrous Solenoids l ............................#72275
For Performer Fuel and Nitrous Solenoids l........................................................................................#72276
For Victor Pro Fuel Solenoids l ..............................................................................................................#72278

DRY EFI NOZZLES

Dry Nitrous
Nozzle #72551

CRATE ENGINES

EFI

Replacement Jet Kits contain all of the jet originally supplies with Edelbrock Plate Nitrous Kits.
For Performer Square-bore (3 steps - .038, .046, .053, .057, .065) l .............................................................. #73001
For Performer RPM Square-bore (5 steps - .055, .061, .071, .075, .078, .082, .085, .089, .099, .102) l ...... #73002
For Performer RPM Spread-bore (3 steps - .059, .062, .071, .075, .081, .086) l ........................................... #73010
For Performer RPM 4500 Series Square-bore (4 steps - .057, .063, .071, .075, .085, .089, .104, .108) l .. #73011

SUPER VICTOR DIRECT

PORT JET PACK

Nitrous exits here

Used in all Performer EFI dry nitrous systems, the Edelbrock dry nitrous nozzle is one of the most
advanced in the industry. The unique nitrous passage design gives extremely high atomization and
is the key to the outstanding performance. Specially designed nitrous outlet enhances atomization.
Aluminum EFI 90 Nozzle (1/16" NPT) l .................................................................................................#72551
Stainless Steel EFI 90 Nozzle (1/16" NPT) l ........................................................................................#72556

NOZZLE INSTALLATION BUNGS

WATER PUMPS

These aluminum bungs allow installation of Edelbrock nozzles in the intake tract of thin walled
sheet metal manifolds. Requires welding, drilling and tapping for installation.
Nozzle Installation Bungs (4 per package) l ........................................................................................#72555

NITROUS NOZZLE PIPE TAPS

ACCESSORIES

Nozzle Pipe Taps

Use these NPT taps to cut threads for custom installation of Edelbrock nitrous nozzles.
Use Pipe Tap #76549 for Edelbrock E2, E3, M3 and dry nozzles, #76559 is designed for E1 nozzles.
1/16" NPT Pipe Tap (for E2, E3, M3 and dry nozzles) l .........................................................................#76549
1/8" NPT Pipe Tap (for E1 nozzles) l .......................................................................................................#76559

BILLET DISTRIBUTION BLOCKS

Use these high-quality distribution blocks to build a custom nitrous system. Machined from billet
aluminum and anodized, they deliver even distribution and optimum flow. Inlets/outlets are 1/8" NPT.
One-in, Four-out Distribution Block (black) l ......................................................................................#76574
One-in, Four-out Distribution Block (blue, -6 for nitrous or fuel lines) l ..........................................#76538
One-in, Eight-out Distribution Block (black) l .....................................................................................#76578
One-in, Six-out Distribution Block (black) l ........................................................................................#76576

Distribution
Block #76574

FUEL PUMPS

NITROUS

REPLACEMENT JET KITS

Edelbrock CNC-machined stainless steel jets are available in Tuner Kits

packaged in indexed, heavy-duty plastic cases. They include a variety of
Edelbrock jets to fine tune your nitrous system for maximum performance.
Street Kit - 80 jets, 4 each of 20 sizes l............................................ #73005

Tuner
Kit #73005

BILLET DISTRIBUTION FITTINGS

SPORTSWEAR
INDEX

ACCESSORIES

TUNER JET KITS

KITS POWER PACKAGES

CAMSHAFT & VALVETRAIN

NITROUS

Billet Distribution Fitting #76535

199

Fittings provide a clean compact plumbing assembly when positioned in the intake manifold valley.
One-In, Four-Out Pro Flo Distribution Fitting, 3/8" NPT to 1/8" NPT, Nitrous l..............................#76535

WWW.EDELBROCK.COM

CARBURETORS

ACCESSORIES NITROUS

Edelbrock Flow
Test Tool #76506
includes an
assortment of
easy-to-change
calibration jets

The only way to ensure that you have adequate fuel pressure for your nitrous system is to measure the
flowing pressure using a flow test tool like our #76506. This tool features an easy-to-read fuel pressure
gauge, a variety of jets to set the correct flow restriction, and easy attachment to your existing fuel line.
Edelbrock Flow Test Tool l .....................................................................................................................#76506

NITROUS BOTTLE HEATER

NITROUS BOTTLE BLANKET

This blanket helps to maintain consistent bottle pressure by keeping heat in the bottle when its cold, and
by protecting the bottle from direct sunlight and the possibility of over-pressurization.
Bottle Blanket (for 10-lb. bottles) l .........................................................................................................#72705

1/4-TURN BALL VALVE KIT

Nitrous Bottle Heater #72700

BOTTLE NUT COMBO WRENCH

1/4-Turn Ball
Valve Kit #72952

BOTTLE NUT AND WASHER

PLEASE REFER TO PAGE 212 FOR MORE INFORMATION REGARDING THE EMISSIONS GUIDE.

200

INDEX

l 50-STATE LEGAL l RACING ONLY l PRE-POLLUTION CONTROLLED VEHICLES l STOCK REPLACEMENT l ENGINE SWAP

SPORTSWEAR

EMISSIONS GUIDE

FUEL PUMPS

2-5/8" Liquid-Filled Fuel

Pressure Gauge #73828

Fuel Pressure Gauges, 0-15 psi

1-1/2" Standard Gauge l ...........................................................................................................................#73831
1-1/2" Liquid-Filled Gauge l ....................................................................................................................#73832
2-5/8" Standard Gauge l ...........................................................................................................................#73827
2-5/8" Liquid-Filled Gauge l ....................................................................................................................#73828

NITROUS

1-1/2" Fuel Pressure

Gauge #73831

Fuel Pressure Gauges, 0-100 psi

1-1/2" Standard Gauge l ...........................................................................................................................#73825
1-1/2" Liquid-Filled Gauge l ....................................................................................................................#73826
2-5/8" Standard Gauge l ...........................................................................................................................#73829
2-5/8" Liquid-Filled Gauge l ....................................................................................................................#73830

ACCESSORIES

1-1/2" Nitrous Pressure Gauge

#73800

WATER PUMPS

1-1/2" Fuel Pressure

Gauge #73825

Pressure gauges are an important element in getting maximum performance and consistency from
your nitrous system. The 1-1/2" nitrous gauges may be fitted onto a nitrous bottle or just in front of
the nitrous solenoid. Braided stainless steel lines are required for all remote mounted nitrous gauges.
2-5/8" gauges are illuminated and come with adapter fittings. Liquid-filled gauges offer additional
vibration dampening for durability and long-term accuracy. They are the best choice for competition
or severe duty applications.
Nitrous Pressure Gauges, 0-1400 psi
1-1/2" Standard Gauge l ...........................................................................................................................#73800
1-1/2" Liquid-Filled Gauge l ....................................................................................................................#73801
2-5/8" Standard Gauge l ...........................................................................................................................#73802

CRATE ENGINES

NITROUS AND FUEL PRESSURE GAUGES

EFI

Bottle Nut
Combo Wrench
#76504

These kits contain a replacement -6AN or -4AN bottle nut and

Teflon washer to seal the bottle nut to the bottle valve.
-4AN Bottle Nut and Teflon Washer l...................................................................................................#76507
-6AN Bottle Nut and Teflon Washer l...................................................................................................#76505
Teflon Washer for -6AN and -4AN Bottle Nuts (qty. 1) l ...................................................................#77580

SUPERCHARGERS

This is one handy item to keep with your bottle. Compatible with all nitrous brands, fits in your glove box,
under your seat, or even in your pocket. This wrench features -3AN, -4AN, -6AN, and 1-1/4" bottle
nut wrenches all in one package. Black anodized aluminum and laser etched for a sharp, clean look!
Bottle Nut Combo Wrench l....................................................................................................................#76504

POWER PACKAGES KITS

Bottle
Blanket
#72705

Our 1/4-Turn Ball Valve Kit is designed as an emergency shut off to isolate the nitrous in the bottle
from the engine compartment in case of an emergency. The valve is typically installed in the drivers
compartment within reach of the driver. If an accident or fire occurs, the driver or emergency personnel
need only turn the handle a 1/4 of a turn to shut off nitrous flow to the solenoids.
1/4-Turn Ball Valve Kit (.375 orifice, rated to 2,000 psi) l ....................................................................#72952

CAMSHAFT & VALVETRAIN

Consistent bottle pressure (900-950 psi) is an important element for proper operation of your nitrous
system. The Edelbrock Nitrous Bottle Heater thermostatically raises the pressure when necessary
by applying heat to the bottle. Comes with all necessary hardware and includes velcro straps for
quick and easy bottle removal. Note: Not for use on carbon fiber bottles.
Bottle Heater - 12 volt (for 10-lb. and 15-lb. bottles) l..........................................................................#72700
Bottle Heater Thermostat - 12 volt (for 10-lb. and 15-lb. bottles) l ...................................................#72702

MANIFOLDS GASKETS CYLINDER HEADS

EDELBROCK FLOW TEST TOOL

CARBURETORS
CYLINDER HEADS GASKETS MANIFOLDS
CAMSHAFT & VALVETRAIN
KITS POWER PACKAGES

TUBE BENDER

Tube Bender
#76503

Makes installation of those tough-to-bend direct port nitrous lines a breeze. Get a professional looking
installation every time. Can also be used on other 3/16" hard lines.
3/16" Tube Bending Tool ............................................................................................................................#76503

DIGITAL DELAY TIMER

The Digital Delay Timer is used to activate a second or third stage of nitrous at adjustable pre-set
intervals. Timer activation begins when the unit receives a 12V trigger signal, such as transbrake
release, and is adjustable in increments of 1/10th of a second or less.
Digital Delay Timer l ................................................................................................................................#71907

Time Delay
Relay #71907

RELAY ASSEMBLY

Use the Edelbrock Relay Assembly as a replacement harness if you are transferring a nitrous system
into a different vehicle or with many other devices which require a wide open throttle activation.
30 Amp Relay Assembly (includes switches, relay, wiring and connectors) l ................................#72270

30 Amp
Relay Assembly
#72270

PRESSURE DEACTIVATION SWITCH

This Pressure Deactivation Switch is adjustable from 3 to 25 psi to disengage the nitrous system once the
turbo has achieved the set boost pressure level. Factory pre-set at 7 psi, this switch is ideal for hard-core
racing applications to prevent wheel spin and over-boost.
Pressure Deactivation Switch (adjustable from 3-25 psi) l ...............................................................#72209

FUEL PRESSURE SAFETY SWITCHES

Safety
Switch #72210

ACCESSORIES

Manufactured by Russell, our wide variety of lightweight aluminum, stainless and brass adapter fittings
allow for the connection of Russell nitrous hose ends to almost any component. Use the AN size that
matches your hose and NPT (National Pipe Thread) size that matches the component you are plumbing.

HIGH PRESSURE NITROUS AND FUEL FILTER FITTINGS:

STRAIGHT

Filters are a key element to prevent debris from clogging nitrous or fuel jets and causing solenoids to leak.
These filter fittings are designed to be used in-line with your nitrous system in place of standard fittings to
help filter your nitrous and fuel.
4AN to 1/8" NPT nitrous (blue)...................................................................................................................#76514
6AN to 1/4" NPT nitrous (blue)...................................................................................................................#76515
6AN to 1/4" NPT fuel (red) ..........................................................................................................................#76544

#76512

WATER PUMPS

CRATE ENGINES

#76514

#76524

PURGE KIT/NITROUS GAUGE ADAPTER

4AN Purge/nitrous gauge adapter (brass) ..............................................................................................#76512

#76531

FLARE TO PIPE FITTING: 90

3AN x1/8" NPT 90 (blue) ............................................................................................................................#76524

#76568

NITROUS
FUEL PUMPS

NITROUS AND FUEL ADAPTER FITTINGS

#76544

#76519

FLARE TO PIPE FITTINGS: STRAIGHT

3AN - 5/16"-24 (stainless)............................................................................................................................#76525

3AN - 1/8" NPT (red) ....................................................................................................................................#76531

PIPE REDUCER BUSHING

1/4" NPT female -1/8" NPT male (red)......................................................................................................#76568

FLARE TO FLARE "Y" FITTINGS

3AN - 3AN - 3AN (red) ................................................................................................................................#76519

4AN - 4AN - 4AN (red) ................................................................................................................................#76537
6AN - 6AN - 6AN (blue) ...............................................................................................................................#76546

SPORTSWEAR
INDEX

Maintaining adequate fuel pressure is critical when it comes to nitrous. These fuel pressure safety switches
can be used in conjunction with your nitrous systems to safeguard against inadequate fuel pressure.
Fuel Pressure Switch 5 psi l...................................................................................................................#72210
Fuel Pressure Switch 30 psi l.................................................................................................................#72213
Fuel Pressure Switch 50 psi l.................................................................................................................#72214

Pressure
Switch #72209

EFI

SUPERCHARGERS

NITROUS ACCESSORIES & ADAPTERS

GO TO OUR WEBSITE FOR COMPLETE ADAPTER LISTINGS!

201

WWW.EDELBROCK.COM

CARBURETORS

MECHANICAL

FUEL PUMPS

Performer RPM 110 GPH

Fuel Pump #1721 for
S/B Chevy

A must for drag racing, circle track racing, street machines or any application that demands a high-volume
fuel delivery, these fuel pumps feature a high quality three stage polished finish. High-volume 3/8" NPT inlet
and outlet orifices surpass the capacity of conventional models. Produces 10 psi and must be used with
an external fuel pressure regulator such as our Fuel Pressure Regulator #8190 or #1727. For gasoline only.
Clockable lower housing can be rotated in 60 Increments for best inlet/outlet alignment.
For Small-Block and "W" Series Chevrolet.............................................................................................#1711
For Big-Block Chevrolet...............................................................................................................................#1712
For 289-351W Ford.........................................................................................................................................#1715
For 429/460 Ford.............................................................................................................................................#1718

Victor Series 130 GPH

Fuel Pump #1718
429/460 Ford

EFI

FOR HOLLEY STANDARD-FLANGE

DUAL-FEED OR 4500 SERIES CARBS

#8127

STAINLESS STEEL BRAIDED FUEL LINE KITS

FOR RACING FUEL PUMPS TO REGULATOR KITS

EMISSIONS GUIDE

PLEASE REFER TO PAGE 212 FOR MORE INFORMATION REGARDING THE EMISSIONS GUIDE.

202

INDEX

l 50-STATE LEGAL l RACING ONLY l PRE-POLLUTION CONTROLLED VEHICLES l STOCK REPLACEMENT l ENGINE SWAP

SPORTSWEAR

Connects mechanical fuel pumps with 1/2" NPT outlets to Edelbrock Fuel Pressure Regulator Kits.
Made of the highest quality materials. Pre-assembled hose with hose ends.
22" Braided Fuel Line Kit (for S/B applications).......................................................................................#8122
27" Braided Fuel Line Kit (for B/B applications).......................................................................................#8127

FUEL PUMPS

#8122

NITROUS

Regulator Kit #8195

Fuel Pressure Regulator #8190 is for carburetor applications that require consistent pressure from 4-1/2 to
9 psi. It features two 3/8" NPT outlets, one 3/8" NPT inlet and is adjustable from 5 to 12 psi. This regulator
is manufactured from billet aluminum and features a Nylon-reinforced nitrile diaphragm for excellent heat
and leak resistance. Fuel Pressure Regulator #1789 is ideal for providing consistent pressure in Edelbrock
94 or other low pressure carburetor applications. It features two 3/8" NPT outlets, one 3/8" NPT inlet and is
adjustable from 1 to 4 psi. Features a chrome finish for a great look when installed.
Adjustable Billet Fuel Pressure Regulator (Satin/Black Finish - 4-1/2 to 9 psi)..................................#8190
Adjustable Fuel Pressure Regulator (Chrome Finish - 1 to 4 psi)..........................................................#1789

ACCESSORIES

FUEL PRESSURE REGULATORS

WATER PUMPS

These kits allow for the adjustment of fuel pressure from 4-1/2 to 9 psi. Match with Edelbrock racing
fuel pumps. Kits include fittings, mounting plate, fuel line and regulator. Fuel line from fuel pump to
regulator is not included; use #8122 or #8127 for fuel pumps with 1/2" NPT outlets.
Single Regulator, Dual Outlet, Standard-Flange.....................................................................................#8192
Single Regulator, Dual Outlet, 4500 Flange..............................................................................................#8193
Single Regulator, Dual Outlet, Standard Flange with GM Throttle.....................................................#8195
Single Regulator Plate Only, Standard Flange........................................................................................#8189

CRATE ENGINES

FUEL PRESSURE REGULATOR KITS

Regulator Kit #8192

SUPERCHARGERS

Victor Series 130 GPH

Fuel Pump #1715 for
289-351W Ford

POWER PACKAGES KITS

Performer RPM 110 GPH

Fuel Pump #1713
for Pontiac V8

VICTOR SERIES 130 GPH FUEL PUMPS

CAMSHAFT & VALVETRAIN

Performer RPM
110 GPH Fuel Pump
#1722 for B/B Chevy

Designed for use with all Edelbrock carburetors used in Performer or Performer RPM applications.
These high-performance Street Fuel Pumps feature a high quality three stage polished finish.
The unique valve design improves flow quantity and quality, and will support engines up to 600 hp.
High-volume, 3/8" NPT inlet and outlet surpasses the capacity of conventional models. Produces 6 psi
and does not require a regulator. Use with gasoline only. Clockable lower housing can be rotated
in 60 Increments for best inlet/outlet alignment.
For Small-Block and "W Series" Chevrolet.............................................................................................#1721
For Big-Block Chevrolet...............................................................................................................................#1722
For Small-Block Chrysler.............................................................................................................................#1720
For Big-Block Chrysler.................................................................................................................................#1723
For 289-351W Ford.........................................................................................................................................#1725
For 352-428 FE Ford........................................................................................................................................#1724
For 429/460 Ford.............................................................................................................................................#1726
For Pontiac V8................................................................................................................................................#1713

MANIFOLDS GASKETS CYLINDER HEADS

PERFORMER RPM SERIES 110 GPH FUEL PUMPS

CARBURETORS
CYLINDER HEADS GASKETS MANIFOLDS

FUEL PUMPS REGULATORS

Fuel Pressure
Regulator
#174131
4-1/4"

These fuel pressure regulators are compatible with all grades of gasoline/methanol and machined from
aircraft quality aluminum for those who demand the best. They have fluorosilicone diaphragm material for
extended life and high temperature protection. Select regulators available with 1/8" NPT gauge port and
a boost reference fitting for blow through or pressurized carb applications (even beyond 30 PSI of boost).
Pressure regulation slope is 0.75 psi/gal of flow rate change. Will hold fuel system pressure for at least
20 minutes after pump shutdown. Developed for optimum compatibility with Edelbrock Quiet-Flo fuel pumps.

CAMSHAFT & VALVETRAIN

160

5-10

Vacuum
Outlet Return or Boost Gauge
Port
Port
Port
Port

3/8" NPT 3/8" NPT

No

Red

Blue

Black

Silver &
Black

No

Yes

#174121 #174122 #174123

#1727

#174131 #174132 #174133 #1778

#174051 #174052 #174053

#174103*

Bypass Style

Fuel Pressure
Regulator
#174052

160

5-10

No

Yes

180

5-10

3/8" NPT 3/8" NPT 3/8" NPT

-10

-10

-6

Yes

Yes

180

5-10

-10

-6 (x2)

-8

Yes

Yes

KITS POWER PACKAGES

HIGH-FLOW CARBURETED ADJUSTABLE FUEL PRESSURE REGULATOR

Fuel Pressure
Regulator #1727

5"

Features six -6 AN inlet/outlet ports and one -6 AN return port

Pressure regulation slope is .75 psi/gal of flow rate change
Boost reference fitting for "blow through" or pressurized carb applications
(even beyond 30 PSI of boost)
Supports up to 1,300 hp using gasoline or up to 650 hp using methanol
Can be used with low pressure nitrous oxide systems
Max
Flow
Rate
(GPH)
180

EFI

SUPERCHARGERS

CARBURETED ADJUSTABLE FUEL PRESSURE REGULATORS

Max Adjustable
Flow Pressure
Inlet
Range
Rate
(GPH)
(PSI)
Port
Non-Bypass Style

Adjustable
Pressure
Range
Inlet
(PSI)
Port
5-10

-6

Vacuum
Outlet Return or Boost Gauge
Port
Port
Port
Port
-6

-6

Yes

Yes

Red
#174081*

Blue

Black

Silver &
Black

CRATE ENGINES

REGULATOR SERVICE PARTS

Carbureted Diaphragm & Hardware Rebuild Kit

(for use with #174051, #174052, #174053, #174081 & #174103) ...............................................................#178040

ACCESSORIES

WATER PUMPS

Fuel Pressure
Regulator
#174081

NITROUS

Regulator Rebuild Kit #178040

FUEL PUMPS

Universal Fuel
Pump Relay Kit
#1795

SPORTSWEAR
INDEX

FUEL PRESSURE REGULATORS

203

UNIVERSAL FUEL PUMP RELAY KIT

Designed specifically for proper fuel pump wiring, this 30-amp relay kit is strongly recommended when
installing Edelbrock electric fuel pumps #1791 and #1792 but can also be used as a universal relay on
competitors pumps. Constructed of the highest quality wire and weather pack 30-amp Bosch relay,
this industrial grade kit allows you to mount the relay in virtually any location. The relay assures proper
voltage to the fuel pump at all times, for consistent and accurate fuel pressure. Each kit is complete with:
18' of 12-volt activation wire lead, 18' of 12-volt battery wire lead, 18' fuel pump 12-volt lead, 18' of ground
wire lead, two red 12 ga. and one 18 ga. pink and black wire, 30-amp weather resistant Bosch relay
and complete instructions.
Fuel Pump Relay Kit .....................................................................................................................................#1795
*While supplies last

WWW.EDELBROCK.COM

CARBURETORS

ELECTRIC FUEL

PUMPS

Quiet-Flo Fuel
Pump #182061
5"
2-1/2"

These state-of-the-art Electric Fuel Pumps offer maximum performance in a compact package.
With anodized aluminum housings and high-quality internals, they are both strong and durable.
The carbon vanes and composite rotor give these pumps the added boost for maximum performance.
The high quality construction results in a pump that is 4 to 14 dB quieter than competitors pumps at
the same pressure. #1791 is factory preset to 6.5 psi and no regulator is required. With a replaceable
screen type inlet filter and the free flow rate of 120 GPH it is sufficient to supply 480 hp. #1792 has a
free flow rate of 160 GPH, enough to feed a 1000 hp engine. This pump is factory preset to 12 psi
and requires an external regulator such as the Edelbrock regulator #1727.
Important Notes: These pumps should be mounted as close to the fuel tank as possible, at or below the fuel level.
For proper installation and voltage requirements, use fuel pump relay kit #1795. All fuel pumps are for gasoline only.
Edelbrock offers rebuilding services for Quiet-Flo fuel pumps - call for more information.

5"

Inlet
Port
(NPT)

Outlet
Port
(NPT)

External
Regulator
Required

Supported
HP

Red

Blue

Black

120

6.5

3/8"

3/8"

No

480+

#182051

#182052

#1791

160

12

1/2"

1/2"

Yes

1,000+

#182061

#182062

#1792

Precision molded composite rotor reduce inertia

loads for longer fuel pump life

The body is machined from aluminum billet

stock and anodized for longer protection
from corrosion

Cutaway of Pump
#1791

Internal race is machined

to minimize wear, improve
performance, and reduce noise

Lightweight carbon vanes reduce

the centrifugal force for less friction and wear

Part No.

HP Rating

Current Draw

#1791, #182051, #182052

384 hp @ 12.0 VDC

480 hp @ 14.0 VDC @ 6.5 psi

3.2 amps @ 12.0 VDC

3.6 amps @ 14.0 VDC @ 6.5 psi

EFI

#1792, #182061, #182062

864 hp @ 12.0 VDC

1,008 hp @ 14.0 VDC @ 7.5 psi

3.8 amps @ 12.0 VDC

4.3 amps @ 14.0 VDC @ 7.5 psi

CRATE ENGINES

FUEL PUMP SERVICE PARTS

IN-LINE STREET/STRIP ELECTRIC FUEL PUMP

Street/Strip fuel pumps can be utilized as an in line booster pump or as a stand-alone unit. These pumps
are continuous duty rated and are ideal for EFI applications that require additional pumping capabilities from
upgrade modifications such as high compression pistons, high flow intake manifold, big bore throttle bodies,
cams, turbo kits, supercharger and nitrous applications up to 600 HP. Includes mounting brackets and 3/8"
(10mm x 1) barb fittings. Match with EFI regulator #1728 for adjustability from 35 to 90 psi. For external use only.
255 liter/hr. (67 gph @ 45 psi), 3/8" Hose Barb Fittings ..........................................................................#3594
Important Notes: These pumps should be mounted as close to the fuel tank as possible, at or below the fuel level.

PLEASE REFER TO PAGE 212 FOR MORE INFORMATION REGARDING THE EMISSIONS GUIDE.

204

INDEX

l 50-STATE LEGAL l RACING ONLY l PRE-POLLUTION CONTROLLED VEHICLES l STOCK REPLACEMENT l ENGINE SWAP

SPORTSWEAR

EMISSIONS GUIDE

FUEL PUMPS

Quiet-Flo Pump and Regulator Combo Kit #17923

Edelbrock Fuel Pump and Regulator kits take the guesswork out of selecting the right fuel pump and
regulator combination for your application. These kits are made up of our top selling combinations for
both carbureted and EFI applications. Fuel Pump and Regulator Kit #17923 includes a Quiet-Flo fuel pump
#1792 and regulator #1727. This combination flows up to 160 gph, allowing it to support up to 1,000 hp for
carbureted applications. For EFI applications we have two options; Fuel Pump and Regulator Kit #17943
which includes fuel pump #1794 and regulator #1729, as well as Fuel Pump and Regulator Kit #35943 which
includes our in-line street/strip fuel pump #3594 and regulator #1728, for a combination that flows 57 gph
and can support up to 600 hp.
Fuel Pump & Regulator Kit (includes electric fuel pump #1792 & regulator #1727) ...........................#17923
Fuel Pump & Regulator Kit (includes electric fuel pump #1794 & regulator #1729) ...........................#17943
Fuel Pump & Regulator Kit (includes electric fuel pump #3594 & regulator #1728) ...........................#35943

NITROUS

FUEL PUMP & REGULATOR KITS

ACCESSORIES

Electric Fuel Pump #3594

Quiet-Flo Fuel Pump Rebuild Kit (for use with #1791, #182051, #182052) ...........................................#178050
Quiet-Flo Fuel Pump Rebuild Kit (for use with #1792, #182061, #182062) ...........................................#178060

WATER PUMPS

Fuel Pump Rebuild Kit #178050

SUPERCHARGERS

Accurately set
to factory specs,
and can be easily
adjusted with this
screw if needed

POWER PACKAGES KITS

Electric Fuel
Pump #1792

CAMSHAFT & VALVETRAIN

1-1/2"

GPH

Factory
Pressure
Setting (PSI)

MANIFOLDS GASKETS CYLINDER HEADS

QUIET-FLO ELECTRIC FUEL PUMPS

CARBURETORS

EFI & CARB APPLICATIONS

These fuel pumps feature an anodized aluminum housing and high-quality internals, resulting in both
a strong and durable design. The in-line design keeps the pump motor and components cool even
under harsh conditions. Compatible with all grades of gasoline and methanol type fuels only.
Each pump is factory-tested and includes mounting brackets.
Important Notes: Edelbrock offers rebuilding services for Quiet-Flo fuel pumps - call for more information.
GPH
Inlet Port
Outlet Port
Red
Blue
Black
Quiet-Flo Fuel
EFI Pump #182032

Quiet-Flo Fuel
EFI Pump #182081

Fuel Pressure
Regulator
#1728

SUPERCHARGERS

KITS POWER PACKAGES

-10 (SAE)

-10 (SAE)

#182031

#182032

#1790

-12 (SAE)

-12 (SAE)

#182071

#182072

#1794

Compact design for tight locations and can be mounted inside fuel cell or external
Flow-thru design keeps motor and pump components cool even under harsh conditions
Machined from aerospace quality components
Compatible with all 12-15 volt systems
Not for use with diesel fuel
GPH

Inlet Port

Outlet Ports

Red

Blue

Black

67 @ 45 psi (12 volts)

-8

-6

#182081

#182082

#182083

FUEL PRESSURE REGULATORS

EFI ADJUSTABLE FUEL PRESSURE REGULATORS

These Fuel Pressure Regulators are compatible with all grades of gasoline/methanol and machined from
aircraft quality aluminum for those who demand the best. They have a diaphragm made of fluorosilicone
for extended life and high temperature protection. These regulators will hold fuel system pressure for at least
20 minutes after pump shutdown. Mounting bracket, fittings and hardware are included. Each regulator
features a vacuum/boost compensating port for a supercharger, turbo or intake manifold vacuum connection.

EFI

Max
Flow
Rate
(GPH)

Fuel Pressure
Regulator #1729

WATER PUMPS

CRATE ENGINES

80 @ 45 psi
120 @ 45 psi

EFI AND CARBURETED SLIM-LINE

ELECTRIC FUEL PUMP

ACCESSORIES

3-1/2"

2-1/4"

2"

Adjustable
Pressure
Inlet
Range
(PSI)
Port

Vacuum
Outlet Return or Boost Gauge
Port
Port
Port
Port

Red

Blue

Black

Silver &
Black

180

35-90

-6

-6

-6

Yes

No

#174041

#174042

#174043

#1728

180

35-90

-10

-10

-6

Yes

Yes

#174021

#174022

#174023

#1729

270

35-90

-10

-10

-8

Yes

Yes

#174113*

EFI REGULATOR
SERVICE PARTS

EFI Diaphragm & Hardware Rebuild Kit

(for use with #1728, #1729, #174021, #174022,
#174023, #174041, #714042, #174043) ..........................................................................................................#178010

NITROUS

HIGH PERFORMANCE IN-TANK FUEL PUMPS

FUEL PUMPS
SPORTSWEAR
INDEX

ELECTRIC

ELECTRIC FUEL PUMPS

CAMSHAFT & VALVETRAIN

CYLINDER HEADS GASKETS MANIFOLDS

FUEL PUMPS

In-Tank
Fuel Pump
#17935

These OE in-tank upgrade pumps are ideal for supporting performance improvements such as a high
performance intake manifold, cams, turbo, direct port nitrous systems, big-bore throttle body, etc.
They replace your original pump exactly and include all necessary hardware for an easy installation.
FOR 1985-97 FORD MUSTANG (Except 1996-97 COBRA)
155 liter/hr. (41 gph) ......................................................................................................................................#17930
190 liter/hr. (50 gph) ......................................................................................................................................#17931
255 liter/hr. (67 gph) ......................................................................................................................................#17932
255 liter/hr. (67 gph), High Pressure for Turbo or Nitrous .....................................................................#17935
FOR 1985-92 FUEL-INJECTED GM VEHICLES, NON-TBI
255 liter/hr. (67 gph) ......................................................................................................................................#17933
FOR 1994-99 ACURA INTEGRA & 1992-00 HONDA CIVIC
255 liter/hr. (67 gph), 60+ psi for Turbo, Supercharger or Nitrous.......................................................#17937
*While supplies last

205

WWW.EDELBROCK.COM

CARBURETORS

FILTERS FUEL

PUMPS

Russell Performance Products

An Edelbrock Company

These aluminum street fuel filters feature a sintered-bronze 40 micron element that can be cleaned or replaced.
They are designed for carbureted engines making less than 300 hp and can fit 5/16" or 3/8" fuel hoses.
Description

Inlet/Outlet
Port

1-1/8" diameter x 3" length

1-1/8" diameter x 3" length
Replacement element

Blue
#645080
#8156
#8158

5/16"
3/8"

Red
#645070
#8139
#8158

Chrome
#645060
#8136
#8158

Black
#645090
#8157
#8158

1-1/4" COMPETITION FUEL FILTERS

Aluminum Street Fuel Filters

Inlet/Outlet
Port

Description
3" length

Polished
Aluminum

Black

#650130
#650100
#650190
#650170
#651670
#650160

#650140
#650110
#650200
#650180
#651670
#650160

#650133
#650103

#651670
#650160

-6 male
-8 male
-6 x 3/8" male NPT
-6 x 3/8" male NPT

PROFILTERS

Offered in -6, -8, -10 and -12 male outlets

standard or in multiple end configurations
Flows up to 140 gallons per hour at 7 psi

Designed for carbureted or fuel

injected engines
Anodized in red/blue or black/silver

-6 male
-8 male
-10 to -6 male
-10 male
-12 to -10 male
-12 male

Black/Silver

#649000
#649110
#649060
#649140
#649150

#649160

#649170
#649180
#648990

#649060
#649143
#649153
#649213

#649180
#648990

6" PROFILTER FOR EFI

Clear anodized billet aluminum for use with ProFilters.

2" ID for 8-1/4" & 12" ProFilters ..................................................................................................................#649053
2.2" ID for 6" ProFilters ................................................................................................................................#649273

EMISSIONS GUIDE

PLEASE REFER TO PAGE 212 FOR MORE INFORMATION REGARDING THE EMISSIONS GUIDE.

206

INDEX

l 50-STATE LEGAL l RACING ONLY l PRE-POLLUTION CONTROLLED VEHICLES l STOCK REPLACEMENT l ENGINE SWAP

SPORTSWEAR

ProFilter Clamp #649053

FUEL PUMPS

FUEL FILTER CLAMPS FOR RUSSELL PROFILTERS

NITROUS

Machined from 6061-T6, our ProFilter for EFI systems utilizes a 10 micron pleated paper element
that insures maximum filtration while delivering large volumes of fuel. The -10 inlet and outlet ports
incorporate O-ring boss seals for leak-free connections. Features a black anodized body with silver ends.
Mounting clamp included.
6" ProFilter for EFI applications (-10 inlet/outlet) ...................................................................................#649250
Replacement Paper Element (10 micron).................................................................................................#649255
Replacement Stainless Steel Element (60 micron) ................................................................................#649256
Replacement O-rings (-10, qty. 2) ..............................................................................................................#648980

ACCESSORIES

Red/Blue

WATER PUMPS

6" ProFilter #649250

-8 male
-12 male

CRATE ENGINES

12" and 8-1/4" Fuel Filters

12" filter with paper element

12" filter with paper element
12" Replacement paper element (10 microns)
8-1/4" high flow with nylon element
8-1/4" high flow with nylon element
8-1/4" high flow with nylon element
8-1/4" high flow with nylon element
8-1/4" high flow with nylon element
8-1/4" high flow with nylon element
Replacement nylon element (60 microns)
Replacement seals for all ProFilters

Inlet/Outlet
Port

EFI

Description

SUPERCHARGERS

The Russell ProFilter is engineered to provide full flow filtration with a minimum amount of restriction.
Precision machined from billet aluminum, the ProFilter end caps are removable for easy access to
service the element. The replaceable element is secured with a positive O-ring seal, insuring the
optimum in filtration.

POWER PACKAGES KITS

Competition
Fuel Filters

3-1/4" length
3" length
3-1/4" length
Replacement element (40 microns)
Replacement seals for all competition filters

Red/Blue

CAMSHAFT & VALVETRAIN

1-1/4" Competition fuel filters are designed for high volume gas or alcohol fuel systems. They are
manufactured from billet aluminum and available -6, -8 and 3/8" NPT male outlets. A 40 micron disc
element keeps the fuel free of debris. The 3/8" NPT connects directly to fuel pump, Y-block or fuel
regulator. Available in polished aluminum, red/blue or black anodized finish.

MANIFOLDS GASKETS CYLINDER HEADS

ALUMINUM STREET FUEL FILTERS

CARBURETORS

Both sides features the Edelbrock Racing logo. Made with 100% durable, high quality pre-shrunk cotton.
Description
SM
MD
LG
XL
2X
3X

#2331
#2332
#2333
#2334
#2336
(A) Red Shirt

#2366
#2367
#2368
#2369
#2370
(B) White Shirt
#2310
#2311
#2312
#2313
#2314
#2315
(C) Black Shirt

MEN'S BLACK ON BLACK TEE

(A)
(F)

(B)

(C)

Features a black Edelbrock logo for a subtle look. Made with 100% durable, high quality pre-shrunk cotton.
Description
MD
LG
XL
2X
3X
#98102
#98103
#98104
#98105
#98100
(D) Black on Black Shirt

MEN'S EDELBROCK SCRIPT TEE

Tan Shirt featuring the Edelbrock script logo on the front. Made of 52/48% cotton/Polyester.
Description
SM
MD
LG
XL
2X
3X
#98220
#98221
#98222
#98223
#98224
#98225
(E) Edelbrock Script

4X
#98226

MEN'S EDELBROCK EQUIPPED TEE

(D)

(E)

Features a small offset Edelbrock Equipped Logo on the front and a large Edelbrock Equipped logo with
a 32 Ford on the back. Made with 100% durable, high quality pre-shrunk cotton.
Description
SM
MD
LG
XL
2X
3X
#98111
#98112
#98113
#98114
#98115
#98116
(F) Adult Size

MEN'S RAM LOG TEE

SUPERCHARGERS

KITS POWER PACKAGES

TEES

MEN'S RACING TEE

CAMSHAFT & VALVETRAIN

CYLINDER HEADS GASKETS MANIFOLDS

SPORTSWEAR

(G)

(F)

(I)

Features a small offset Edelbrock Racing Logo on the front and a large Edelbrock Racing logo with a
32 Ford on the Back. This tagless t-shirt is made with 100% durable, high quality pre-shrunk cotton.
Description
SM
MD
LG
XL
2X
3X
#98122
#98123
#98124
#98125
#98126
#98127
(H) Adult Size

Features the Edelbrock E-Force logo on the front and the message, "Because normal aspiration sucks" on
the back. Made with 100% durable, heavy weight cotton.
Description
SM
MD
LG
XL
2X
3X
#98165
#98166
#98167
#98168
#98169
#98170
(I) E-Force Shirt
(H)

MEN'S PINSTRIPED LONG SLEEVE

Features a cool pinstriped graphic with the Edelbrock cross logo on the front, back and right sleeve.
Made with 100% high quality pre-shrunk cotton.
Description
SM
MD
LG
XL
2X
3X
#98129
#98130
#98131
#98132
#98133
(J) Pinstriped Long Sleeve Shirt #98128

FUEL PUMPS
SPORTSWEAR
INDEX

MEN'S VINTAGE ROADSTER TEE

MEN'S E-FORCE SUPERCHARGER TEE

NITROUS

ACCESSORIES

WATER PUMPS

CRATE ENGINES

EFI

Features the vintage Edelbrock Ram Log Manifolds logo screen printed on the back with a vintage
Edelbrock script logo on the pocket. Made with 100% durable, high quality pre-shrunk cotton.
Description
MD
LG
XL
2X
3X
#98322
#98323
#98324
#98325
#98326
(G) Ram Log Shirt

MEN'S EDELBROCK RACING TANK TOP

(J)

(K)

207

This black tank top has the Edelbrock Racing logo screen printed on the front and back.
Made with 100% durable, high quality pre-shrunk cotton.
Description
MD
LG
XL
2X
#98117
#98118
#98119
#98120
(K) Racing Tank Top

3X
#98121

CARBURETORS

TEES, JACKETS AND HOODIES

SPORTSWEAR
(L)

Features the Edelbrock script logo screen printed across the back and an offset script logo on the front.
Made with 100% high quality cotton.
Color
SM
MD
LG
XL
#98060
#98061
#98062
#98063
(L) White V-Neck Shirt
#98064
#98065
#98066
#98067
(M) Black V-Neck Shirt

MANIFOLDS GASKETS CYLINDER HEADS

WOMEN'S V-NECK TEE

(M)

WOMEN'S STRIPED TANK TOP

High-low tank, features a solid front and striped back. Made of cotton/poly sheer for a super-soft feel.
Color
SM
MD
LG
XL
2XL
#98139
#98140
#98141
#98142
#98143
(N) Striped Tank Top

(N)

Features contrasting rib collar and sleeves. Made of 60/40 combed ringspun cotton/polyester
with three-quarter raglan sleeves.
Color
SM
MD
LG
XL
#98017
#98018
#98019
#98020
(O) Baseball Shirt

2XL
#98021

WOMEN'S CAMOUFLAGE TANK TOP

(O)

XL
#98095

(P)

(Q)

(R)

(S)

(T)

(U)

(V)

(W)

POWER PACKAGES KITS

Features the Edelbrock script logo screen printed in camouflage on the front with gold trim.
Made with 96% cotton and 4% spandex.
Color
SM
MD
LG
#98092
#98093
#98094
(P) Black Tank Top with Camouflage Logo

CAMSHAFT & VALVETRAIN

WOMEN'S EDELBROCK BASEBALL SHIRT

WOMEN'S QUILTED VEST

SUPERCHARGERS

Stay warm and dry with this 100% polyester shell, 100% poly lined and 6 oz. polyfill vest. Features
Edelbrock Equipped patch on the front.
Color
SM
MD
LG
XL
2XL
#98134
#98135
#98136
#98137
#98138
(Q) Vest

WOMEN'S PULLOVER HOODIE

2XL
#98016
#98005

EFI
CRATE ENGINES

Features a large Edelbrock Script logo across the front. Made with 60% cotton 40% Polyester.
These sweaters run a tad bit small, so shop accordingly.
Color
SM
MD
LG
XL
#98012
#98013
#98014
#98015
(R) Red Pullover Hoodie
#98001
#98002
#98003
#98004
(S) Black Pullover Hoodie

EDELBROCK EQUIPPED HOODIE

WATER PUMPS

This hoodie features an offset Edelbrock Equipped logo on the front and a large Edelbrock Equipped logo
with a 32 Ford on the back. Made with 80% cotton 20% polyester blend.
Description
SM
MD
LG
XL
2X
3X
#98006
#98007
#98008
#98009
#98010
#98011
(T) Edelbrock Equipped Hoodie

RACING SWEATSHIRT

ACCESSORIES

Features the classic Edelbrock Racing logo on the front. Made with 100% durable, heavy weight cotton.
Description
MD
LG
XL
2X
3X
#9856
#9857
#9858
#9859
#9860
(U) Racing Sweatshirt

MEN'S EDELBROCK LIGHT JACKET

NITROUS
FUEL PUMPS

This jacket has the Edelbrock Racing logo embroidered on the left front. Features two front zippered
pockets and one inner right zippered chest pocket. Constructed with a windproof/water resistant
Toughlan nylon, double-stitched seams for added strength and lined with super soft lightweight fleece.
Description
SM
MD
LG
XL
2X
3X
#98032
#98036
#98037
#98038
#98039
#98040
(V) Edelbrock Light Jacket

MEN'S VINTAGE QUILTED JACKET

208

INDEX

WWW.EDELBROCK.COM

SPORTSWEAR

This diamond quilting jacket has the Edelbrock Performance Equipment logo embroidered on the back and
Edelbrock logo on the left front. Constructed with 100% nylon exterior and a gray jersey knit lining made
from 65% polyester and 35% cotton. Its also water resistant, making it ideal to stay warm in the winter!
Description
SM
MD
LG
XL
2X
#98041
#98042
#98043
#98044
#98045
(W) Vintage Quilted Jacket

CARBURETORS

Features a small offset Edelbrock Equipped Logo on the front and a large Edelbrock Equipped logo with
a 32 Ford on the back. Made with 100% durable, high quality pre-shrunk cotton.
Description
XS
SM
MD
LG
#98200
#98201
#98202
#98203
(A) Child Size

KID'S VINTAGE ROADSTER TEE

Features a small offset Edelbrock Racing Logo on the front and a large Edelbrock Racing logo with a
32 Ford on the Back. This tagless t-shirt is made with 100% durable, high quality pre-shrunk cotton.
Description
XS
SM
MD
LG
#98204
#98205
#98206
#98207
(B) Child Size
(A)

CAPS

(B)

SCRIPT LOGO CAP

These flex-fitted designed caps feature an embroidered Edelbrock script logo on the front.
Size
Red (C)
#9153
Small/Medium Cap (6-7/8" - 7-1/4")
#9154
Large/X-Large Cap (7-1/4" - 7-5/8")

(C)

These flex-fitted designed caps features an embroidered Edelbrock logo offset on the front.
Size
Red (E)
#9158
Small/Medium Cap (6-7/8" - 7-1/4")
#9159
Large/X-Large Cap (7-1/4" - 7-5/8")

(E)

CRATE ENGINES
WATER PUMPS

Black (F)
#9156
#9157

MESH TRUCKER CAP

(F)

These caps have a fabric front and mesh back with the Edelbrock script logo screen printed on the front.
Size
Red (G)
Black (H)
#9136
#9137
Mesh Trucker Cap (6-7/8" - 7-5/8")
(G)

CAMOUFLAGE CAP

Features an embroidered Edelbrock script logo on the front. One size fits all velcro strap on the back.
Size
Red (I)
Black (J)
#9162
#9161
Camouflage Cap

(H)

E-FORCE CAP

Features an embroidered E-Force logo offset on the front and the Edelbrock script logo embroidered on
the side of the bill. One size fits all velcro strap on the back.
Size
Part #
#9149
(K) E-Force Supercharger Cap

(I)
(J)

ARMED SERVICES CHARITY CAP

$5.00 from the sale of each cap will be donated to benefit our armed services and their families.
Features an embroidered Edelbrock script logo on the front. One size fits all velcro strap on the back.
Size
Part #
#9146
(L) Charity Cap

(K)
(L)

EDELBROCK EQUIPPED CAP

Features an embroidered Edelbrock Equipped logo. Made of 100% acrylic with an adjustable back strap.
Size
Black
#9169
(M) Flat Bill
#9168
(N) Curved Bill

(M)

NITROUS

ACCESSORIES

Black (D)
#9151
#9152

OFFSET LOGO CAP

(D)

(N)

EDELBROCK KNIT BEANIE

The Edelbrock knit beanie features an embroidered Edelbrock script logo.

Size
(O) Edelbrock Knit Beanie

FUEL PUMPS
SPORTSWEAR
INDEX

KIDS TEES & CAPS

KID'S EDELBROCK EQUIPPED TEE

EFI

SUPERCHARGERS

KITS POWER PACKAGES

CAMSHAFT & VALVETRAIN

CYLINDER HEADS GASKETS MANIFOLDS

SPORTSWEAR

Part #
#9143

EDELBROCK EQUIPPED BEANIE

(O)

(P)

209

(Q)

The Edelbrock Equipped beanie features an "Edelbrock Equipped" patch.

Size
Edelbrock Equipped Beanie

Gray (P)
#9147

Black (Q)
#9142

CARBURETORS

GIFTS AND ACCESSORIES SPORTSWEAR

MANIFOLDS GASKETS CYLINDER HEADS

EDELBROCK - MADE IN USA BOOK & DIE-CAST ROADSTER

This Limited Edition includes a leather bound special edition and a 1:18th scale die-cast replica of Vic
Edelbrock Sr. 1932 Roadster. Authored by Tom Madigan, this book begins with Vic Edelbrock Sr. and
his journey to Southern California from Kansas. It continues with the story of the Edelbrock Equipment
Companys growth from a simple shop at the rear of a gas station to an American institution. Woven
throughout is the history of racing, from the first drag race in Santa Barbara to the dry lakes in Southern
California. It is the story of a company whose influence shaped the automotive performance aftermarket.
(R) Limited Edition Leather Bound Book and Roadster.........................................................................#0328
(S) Hard Cover Book ....................................................................................................................................#0327

(R)

(S)

FENDER COVER

CAMSHAFT & VALVETRAIN

This fender cover is perfect for mechanics and restorers alike. Made from a strong PVC foam and
reinforced with nylon mesh, its impervious to motor oil, coolant, lacquer thinner, brake fluid, etc.
The black non-slip material will not harm paint and adheres to slick surfaces, as well as keeping
tools from sliding off. It measures 22x 34 and is completely washable.
(T) Edelbrock Racing Fender Cover ..........................................................................................................#2324
(U) E-Force Supercharger Fender Cover ..................................................................................................#2323
(T)

These gloves feature a black and red two tone look and are made polyester and micro suede.
Theyre the perfect way to protect your knuckles when your working on your project vehicle.
Only available in XL size.
(V) Mechanics Gloves ................................................................................................................................#9138

POWER PACKAGES KITS

MECHANICS GLOVES

(U)

This Edelbrock Lanyard features a repeating Edelbrock script logo set on a black background
with red borders. They are finished off with black clips and attachments.
(W) Edelbrock Lanyard ................................................................................................................................#9139

(V)

(W)

EFI

E-FORCE SUPERCHARGER LICENSE PLATE FRAME

CRATE ENGINES

Show off your E-Force Supercharger pride with this license plate frame.
(X) E-Force License Plate Frame ...............................................................................................................#9148

EDELBROCK CAMOUFLAGE TOTE

(X)

WATER PUMPS

Drawstring sports tote made of polyester construction with reinforcement black trim at the corners.
Approximate size 14" W x 18" H
(Y) Edelbrock Camouflage Tote .................................................................................................................#9173

ACCESSORIES

EDELBROCK RACING BACKPACK

(Y)

NITROUS

The Team Edelbrock Racing Backpack is tricked out with many special compartments and extra features,
making it the perfect gift to any student, road warrior, or anyone who lives life-on-the-go or at the track.
At the core is an OGIO - Metro Backpack customized with an Embroidered Edelbrock Racing with black
edging. To top it all off, the OGIO Metro backpack has tons of features making it comfortable and durable,
including: Heavy duty reinforcements, wide ergonomic shoulder straps, sternum strap, padded backing
and 400 x 400 dobby pindot nylon/600 denier poly construction
(Z) Edelbrock Backpack..............................................................................................................................#9170

SUPERCHARGERS

NYLON LANYARD

FUEL PUMPS

GO TO: SHOP.EDELBROCK.COM TO SHOP 24 HOURS A DAY!

SPORTSWEAR

Edelbrocks online store is packed full of the latest sportswear, overstocks and closeout merchandise.
Shop online and well ship it for free. Enter coupon code (catalog) at checkout. Free shipping is valid on
standard UPS ground in the contiguous 48 US States. Visa, MasterCard, and PayPal accepted.
(Z)

INDEX

210

FREE CATALOGS

MORE THAN JUST MANIFOLDS

YOUR TOTAL PERFORMANCE SOLUTION!

ance
Russell Perform log #600263
ta
Ca
rts
Pa
ive
Automot

Edelbrock Street Rod

Brochure #03009

The Edelbrock Corporation began in 1938,

producing intake manifolds for Flathead Fords.
Since its humble beginnings, this diverse
company has earned the reputation as
The Most Respected Name in Performance
by manufacturing thousands of quality
performance products for domestic cars
and trucks. Edelbrock continues to grow with
a complete line of products that encompass
much more than our famous intake manifolds
and carburetors for domestic engines.

Russell Performance Products, offers a complete

line of high-quality products for automotive,
Harley-Davidson, import bikes, and ATVs.
Products include brake hoses, hose ends,
polished brake rotors, and a complete line of
hoses for every application.
For our dealers, we have an extensive library of
brochures, point-of-purchase displays, banners,
decals and more. Request our Dealer Literature
brochure for more information.

To get a FREE Edelbrock Catalog CD, or to find your nearest distributor call 1-800-FUN-TEAM

Edelbrock E-Force Supercharger

Catalog #02789

Edelbrock Race Parts

Catalog #01909

Edelbrock Total Power Package

Brochure #00126

ALL EDELBROCK CATALOGS ARE AVAILABLE IN PRINT,

CD-ROM, ONLINE, OR ON YOUR SMARTPHONE
WWW.EDELBROCK.COM

Edelbrock Digital
Catalogs CD #09016

211

WARRANTY & EMISSIONS GUIDE

GENERAL WARRANTY

Edelbrock, LLC shall not be liable for any consequential damages

occasioned by the breach of any written or implied warranty
pertaining to this sale. If you have any questions regarding a product
or installation, please contact our Tech Department toll-free at
800-416-8628 from 7:00 a.m. to 5:00 p.m. PST, Monday through Friday.
It is the constant endeavor of the Edelbrock, LLC to give our customers the highest
quality products obtainable. We warrant each new product to be free from defects
in both workmanship and material from the original date of purchase, provided
that the product is properly installed, subjected to normal use and service and
that the product is not modified or changed in any way, nor damaged because of
negligence by customer or installer. Some states do not allow limitation on how
long an implied warranty is so the limitations outlined here may not apply in your
state. Below is a list of warranty duration by product line:
Product Line
94 Series Carburetors
Performer Series Carburetors
Thunder Series AVS Carburetors
Camshafts & Valvetrain Components
Cylinder Heads
Electronic Fuel Injection Systems & Components
Engine Accessories & Installation Items
Fuel Pumps & Components
Gaskets
Intake Manifolds
Nitrous Systems & Components
Water Pumps
Crate Engines
E-Force Superchargers

Warranty Duration
90 Days
90 Days
1 Year
1 Year
1 Year
1 Year
1 Year
1 Year
1 Year
1 Year
1 Year
1 Year
2 Years
3 Years

Now you can outfit your ride with an

E-Force Supercharger and have the peace
of mind that youll be covered!
Our Limited Powertrain Warranty will pay up
to $16,500 to cover the cost of parts and
repairs for engine, transmission and rear
axle components should anything happen.
For more complete coverage details
and a list of eligible systems,
visit www.edelbrock.com/EForceWarranty

CARBURETORS

Remanufactured carburetors are warranted for a period of thirty (30) days. This
warranty is void if any Carburetor Products are used for race or competition
purposes. Any implied warranty determined to be applicable is limited in duration to
the duration of this warranty. Edelbrock, LLC warranty will be voided if E85 fuel is
used with any Carburetor.

CYLINDER HEADS

When using other camshafts with Edelbrock cylinder heads, please consult the
camshaft manufacturer for recommended valve spring rates and specifications.
Valve spring rates and camshafts must be compatible to avoid severe engine
damage. All Edelbrock complete cylinder heads are supplied with valve springs
that are compatible with Edelbrock camshafts for optimal operations within the
specified RPM range. Camshafts that exceed the specified valve spring rate will
void the warranty on these cylinder heads.

ENDURASHINE FINISH

With proper care and cleaning, your EnduraShine parts will continue to look good
and keep their high gloss shine for years. Never clean your EnduraShine parts
with solvents or carburetor cleaners of any kind. Use of these cleaners will dull
the luster and will remove the coating. Never use solvents or carburetor cleaners
when rebuilding your EnduraShine carburetor. Do not use paper towels to wipe
or clean your EnduraShine parts; always clean your EnduraShine parts using
mild soap, water or non solvent cleaners such as Simple Green. Do not use a
chrome polish or a scratch remover that is not clear coat safe. For best results,
a high quality polish such as Novus No. 2 Fine Scratch Remover, Meguiars or
Mothers Plastic Lens Cleaner should be used. Any cleaning product used on your
EnduraShine parts MUST be clear coat safe or developed for the cleaning of
acrylic coatings. We suggest applying any automotive wax coat after cleaning to
help to seal the surface and protect the finish. Use of abrasive or solvent cleaners
will void your manufacturers warranty.
Customers who believe they have a defective product should either return it to
the dealer from which it was purchased or ship it directly to Edelbrock, LLC along
with proof of purchase and a complete description of the problem. All Electronic
Fuel Injection Systems, Crate Engines, E-Force Supercharger Systems and
Cylinder Heads maintain a conditional warranty. These products must not be
returned to the dealer; they should be sent to Edelbrock only. The product must
be returned freight prepaid. Our warranty service and repair facility is located
at 2700 California Street, Torrance, California 90503. If a thorough inspection
of the product by the factory indicates defects in workmanship or material, our
sole obligation shall be to repair or replace the product. This warranty covers
the replacement or repair of the product only and does not cover the cost of
removal and installation. Edelbrock, LLC reserves the right to replace or repair the
defective part and return said part freight prepaid.

EMISSIONS GUIDE

The following guide is designed to help you determine which Edelbrock components are legal for use on your vehicle. It is your responsibility to use the guide
below to ensure that your installing the right emissions legal product for your application.

l 50-STATE LEGAL

All products with this icon currently have a California Air Resources Board (C.A.R.B.) Executive Order (E.O.) number. They
meet the emission standard for use on pollution controlled vehicles in all of the 50 United States for the vehicles listed on
the E.O. To review and download E.O.s for your application, visit www.edelbrock.com/eo.

l FOR RACING USE ONLY

All products with this icon are intended to be used on vehicles that are exclusively designated for racing use only. They are
not legal for use on vehicles that are registered for street use.

l FOR USE ON PRE-POLLUTION

All products with this icon are legal for use on pre-pollution controlled vehicles. They can be used on all vehicles that were

CONTROLLED VEHICLES (PPCV) manufactured before emissions control regulations were imposed. These vehicles are considered uncontrolled vehicles.
Uncontrolled vehicles are defined as...
1965 and older U.S. manufactured California Certified vehicles
1967 and older U.S. manufactured Federally Certified vehicles
1967 and older Foreign manufactured vehicles

l STOCK REPLACEMENT PART

All products with this icon are manufactured to exact specifications of the Original Equipment (O.E.) part. They must be used
on the specific year, make and model for which it is listed.

l ENGINE SWAPS

All products with this icon are intended to be used with engines that have been transplanted or swapped into an uncontrolled
or pre-pollution controlled vehicle, as defined above. They are not legal for use on pollution controlled vehicles.

WWW.EDELBROCK.COM

212

CARBURETORS
CYLINDER HEADS GASKETS MANIFOLDS
CAMSHAFT & VALVETRAIN
KITS POWER PACKAGES
SUPERCHARGERS
EFI
CRATE ENGINES
WATER PUMPS
ACCESSORIES
NITROUS
FUEL PUMPS
SPORTSWEAR
INDEX

INDEX
0327-0328.................................210
1002 ..........................................186
1031 ......................................16, 38
1032 ............................................16
1033 ................................16, 37, 61
1034 ............................................16
1070-1075.................................126
1076-1077.............................80, 83
1080-1084.................................126
1099 ..........................................186
1100-1109...................................60
1115-1128.................................103
1144-1146...................................60
1151-1152...................................16
1154-1165...................................17
1202 ............................................16
1203 ..........................................186
1205 ..........................................192
1206-1213.................................186
1216-1220.................................192
1221-1236.................................186
1280 ............................................23
1281-1284...................................17
1285-1286...................................23
1287 ......................................17, 38
1288 ............................................17
1290 ............................................23
1400-1407...................................13
1409-1413...................................14
1416-1463...................................18
1464-1471...................................20
1472 ......................................19, 84
1473-1478...................................20
1479-1480...................................18
1481-1483...................................19
1484 ............................................20
1485-1489...................................18
1490-1493...................................19
1494 .......................................19-20
1495 ............................................19
1496-1498...................................20
1499 ......................................19, 84
1511-1512.................................151
1513-1523.................................150
1527 .................................. 148-149
1530-1537.................................138
1538 ..........................................139
1540 ..........................................152
1560-1561.................................147
1562-1563.................................144
1564-1567.................................147
1570-1576.................................146
1577-1579.................................147
1580 ..........................................142
1581 ..........................................140
1582 ..........................................142
1583-1584.................................140
1585-1589.................................142
1590-1595.................................146
1597-1599.................................144
1625 ..........................................105
1711-1726.................................202
1727 ..........................................203
1728-1729.........................170, 205
1778 ..........................................203
1789 ....................................16, 202
1790 ..................................170, 205
1791-1792.................................204
1794 ..................................170, 205
1795 ..........................................203
1801-1826...................................15
1840-1842...................................18
1843-1844...................................19
1873 ............................................20
1920-1986...................................21
1987-1989.......................19, 21, 84
1990-1996...................................21
1998 ................................19, 21, 84
2004-2007.................................134
2011-2016.................................133
2017 ....................................61, 133
2018 ............................................38
2019 ..........................................131
2020-2021.................................134
2022 ..........................................131
2023 ..........................................134
2024 ..........................................131
2025-2026.................................135
2027 ..........................................132
2028-2034.................................134
2035-2036.................................135
2037 ..........................................134
2038-2039.................................131
2040-2042...................................29
2043-2055.................................132

213

2056 ..........................................134
2057-2060.................................132
2061-2064.................................134
2065-2069.................................135
2072-2074.................................132
2075 ..........................................134
2076 ..........................................135
2078 ..........................................132
2079 ..........................................131
2080-2083.................................132
2085 ..........................................135
2086-2087.................................132
2088-2089.................................131
2090-2092.................................132
2093-2099.................................131
2101 ............................................34
2102-2103.................................121
2104 ............................................34
2105 ............................................72
2106 ..........................................121
2108 ..........................................124
2111 ............................................33
2112 ..........................................121
2114 ............................................33
2115 ............................................32
2116 ............................................34
2117 ..........................................121
2121 ............................................61
2122 ..........................................121
2131 ............................................31
2132 ..........................................121
2146 ............................................32
2150 ............................................38
2151 ............................................76
2152 ..........................................121
2156 ............................................77
2157 ..........................................121
2161 ............................................47
2162 ..........................................121
2166 ............................................73
2167 ..........................................121
2171 ............................................71
2172 ..........................................121
2176 ............................................55
2177 ..........................................121
2181 ............................................66
2182 ..........................................121
2186 ............................................56
2191 ............................................57
2192 ..........................................121
2194 ............................................74
2198 ......................................31, 78
2201-2205.................................123
2206 ..........................................124
2207-2210.................................123
2212-2221.................................124
2231 ..........................................123
2261-2281.................................124
2310-2315.................................207
2323-2324.................................210
2331-2376.................................207
2475 ............................................58
2504-2506...................................35
2515 ............................................32
2516 ............................................35
2561 ............................................30
2601-2604...................................35
2665 ............................................70
2691-2693...................................25
2694 ......................................25, 51
2696 ......................................20, 25
2697 ......................................20, 26
2701-2703...................................33
2711 ............................................75
2716 ............................................34
2730 ............................................76
2731-2732...................................25
2733 ............................................79
2737 ..........................................167
2750-2760...................................70
2790 ............................................74
2801-2806...................................53
2810-2811...................................77
2812 ............................................76
2814 ............................................42
2815 ............................................56
2821 ............................................45
2825 ............................................40
2826 ............................................45
2828 ............................................68
2832-2833...................................69
2838-2839...................................71
2840-2856...................................42
2858-2859...................................41
2860-2868...................................69

2883-2884...................................41
2886 ............................................57
2891 ............................................59
2892 ............................................40
2893 ............................................59
2895-2898...................................52
2900-2901...................................39
2902-2907...................................50
2908 ............................................44
2909-2911...................................50
2912 ............................................39
2913 ............................................42
2915 ............................................55
2916 ............................................52
2920 ............................................56
2921 ............................................63
2924 ............................................68
2925-2926...................................40
2927 ............................................52
2928 ............................................63
2929 ............................................68
2930 ............................................31
2934 ............................................63
2936-2937...................................72
2944-2947...................................65
2954 ............................................59
2956-2957...................................78
2959 ............................................41
2965-2966...................................74
2970-2971...................................40
2972-2975...................................39
2978 ............................................40
2980-2981...................................68
2999 ............................................39
3010 ............................................57
3220-3228.................................161
3518-3519.................................170
3532 ..........................................169
3544-3545.................................164
3546-3556.................................170
3558-3569.................................164
3571 ..........................................170
3572 ..........................................169
3574-3589.................................170
3591 ............................................20
3592-3593.................................170
3594 ..................................170, 204
3595-3599.................................170
3604-3607.................................162
3617-3619.................................170
3620 ......................................63, 68
3623 ..........................................153
3624 ............................................53
3627 ............................................38
3628 ............................................65
3629 ............................................44
3630 ............................................40
3631 ............................................42
3632 ............................................72
3633 ......................................50, 52
3634 ............................................78
3635-3636.................................170
3637 ............................................78
3638 ......................................44, 46
3639 ............................................71
3640 ............................................59
3641 ............................................56
3644 ............................................58
3645 ............................................74
3654-3655...................................45
3658 ............................................49
3659 ............................................51
3660 ............................................59
3664-3667.................................159
3674-3679.................................160
3684-3685.................................170
3686 ..................................153, 170
3687 ..........................................170
3701 ............................................34
3702 ..........................................121
3704 ............................................39
3706 ............................................34
3711 ............................................75
3712 ..........................................121
3713 ............................................33
3714 ..........................................123
3721 ............................................61
3722 ..........................................124
3723 ............................................61
3731 ............................................31
3756 ............................................77
3761-3764...................................47
3766 ............................................73
3771 ............................................71
3776 ............................................55

3781-3783...................................66
3785-3789...................................32
3790 ..........................................121
3813 ............................84, 167, 170
3814-3815.................................167
3818 ..........................................165
3820-3822...................................64
3824-3829.................................165
3830-3831...........................84, 165
3832-3833.............................64, 84
3835 ....................................65, 165
3841 ............................................64
3845 ..........................................165
3847-3849.................................167
3853 ..........................................170
3862-3864.................................166
3866 ............................................84
3867-3868.................................166
3869 ..........................................165
3878-3879.................................166
3881 ............................................66
3883 ............................................64
3884 ............................................66
3886-3887...................................65
3888 ..........................................166
3894-3895...................................84
3896-3898.......................20, 26, 84
3899 ......................................19, 84
3978-3988.................................166
4024-4027...................................19
4115-4117.................................190
4118 ..........................................192
4119-4199.................................190
4203 ..........................................191
4204 ..........................................188
4209 ..........................................193
4213 ..........................................191
4226 ..........................................192
4240-4255.................................128
4259 ..........................................112
4262-4264.................................188
4265 ..........................................128
4266 ..........................................188
4267 ..........................................113
4268-4269.................................188
4270-4271.................................193
4272-4277.................................188
4400-4402.................................192
4403 ..........................................187
4404 ..........................................192
4405 ..........................................187
4406-4407.................................191
4410-4413.................................187
4414-4415.................................192
4420 ..........................................191
4426-4428.................................192
4431-4683.................................187
4754-4774...................................75
4789-4790.................................166
4795-4799...................................75
4802-4803...................................80
4804 ............................................26
4810-4818...........................80, 184
4860 ..........................................128
5001 ............................................36
5002 ..........................................122
5020 ..........................................103
5021 ............................................62
5022 ..........................................122
5023-5025.................................103
5026-5028.................................106
5056 ............................................78
5057 ..........................................122
5061 ............................................48
5062 ..........................................122
5066 ............................................73
5073 ............................................91
5076 ............................................55
5081 ............................................67
5085-5087...................................93
5089 ............................................91
5090 ..........................................101
5091 ............................................58
5093 ..........................................101
5408-5409...................................46
5412 ............................................61
5414-5419...................................37
5420-5421...................................49
5425-5426...................................36
5435 ............................................62
5440 ............................................58
5450 ............................................77
5486 ............................................31
5487 ..........................................121
5703 ..........................................117

5712-5722.................................118
5740 ..........................................117
5745 .................................. 117-118
5757 ..........................................118
5762 ..........................................117
5766 ..........................................116
5767 .................................. 117-118
5769-5771.................................116
5777 ..........................................117
5792 .................................. 117-118
5794-5795.................................117
5796 ..........................................118
5802 ..........................................117
5806-5812.................................118
5813-5814.................................117
5821 .................................. 117-118
5822 ..........................................118
5823-5825......................... 117-118
5832 ..........................................117
5845 .................................. 117-118
5857 ..........................................118
5862 ..........................................117
5867-5872.................................118
5877 ..........................................117
5882 ..........................................118
5892-5895.................................117
5896 ..........................................118
5902 ..........................................117
5922 ..........................................118
5932 ..........................................117
5972 ..........................................118
5977 ..........................................117
6009 ..........................................108
6593 ............................................20
6940 ................................20, 39, 84
6941-6942.............................32, 84
6950 ............................................84
6988 ......................................41, 84
6989 ......................................49, 84
6991-6998...................................85
6999 ......................................38, 84
7032-7067...................................38
7070 ............................................41
7071 ............................................38
7073 ............................................41
7075-7086...................................51
7094 ......................................19, 77
7097 ................................38, 49, 51
7101 ............................................35
7102 ..........................................122
7104 ............................................35
7105 ............................................72
7106 ..........................................122
7107-7109...................................43
7110 ............................................38
7111 ............................................76
7112 ..........................................122
7115 ............................................49
7116 ............................................35
7118 ............................................43
7121 ............................................61
7122 ..........................................122
7123-7127...................................64
7129 ............................................70
7132 ..........................................122
7136 ............................................49
7137-7138...................................38
7139-7140...................................44
7141 ............................................45
7144 ............................................58
7156 ............................................78
7157 ..........................................122
7158-7159...................................46
7161 ............................................47
7162 ....................................49, 122
7163 ............................................47
7164 ............................................48
7166 ............................................73
7167-7168.................................122
7176 ............................................55
7177 ..........................................122
7180 ............................................71
7181 ............................................67
7182 ..........................................122
7183 ............................................70
7184-7185...................................65
7186 ............................................57
7193 ............................................58
7194 ..........................................122
7201 ............................................85
7202-7203...................................86
7204 ............................................85
7205 ............................................86
7206-7207...................................85
7208 ............................................86

7209-7218...................................85
7219-7229...................................86
7231 ............................................84
7232 ......................................65, 84
7233 ......................................64, 84
7234 ............................................86
7235 ............................................85
7236-7238...................................86
7239 ............................................85
7240-7242...................................86
7243-7244...................................85
7245 ............................................86
7246-7248...................................85
7249-7250...................................86
7251-7254...........................85, 184
7255-7256...................................54
7257-7258...........................85, 184
7259-7265...................................86
7274 ............................................85
7275-7302...................................86
7310 ............................................85
7313-7328...................................86
7329 ............................................85
7331-7335.................................127
7337-7341...................................86
7342 ............................................85
7343-7344.................................127
7346 ............................................85
7347-7350...................................86
7355 ............................................51
7356-7359...................................86
7361 ............................................85
7362-7366...................................86
7367 ............................................85
7368 ............................................86
7369 ............................................85
7370-7371...................................86
7372 ............................................85
7373-7378...................................86
7379-7380...................................85
7381-7384...................................86
7386-7388...................................85
7389-7394...................................86
7397 ....................................85, 154
7501 ............................................36
7505 ............................................72
7516 ............................................36
7518 ............................................43
7520 ............................................49
7521 ............................................62
7522 ............................................49
7524 ............................................59
7525-7526...................................37
7528 ............................................56
7530-7531...................................31
7532 ............................................85
7535 ............................................62
7546-7549...................................85
7551 ............................................77
7559-7560...................................86
7561-7562...................................48
7563 ............................................86
7564 ............................................70
7566 ............................................73
7568-7569...................................86
7576 ............................................55
7577 ............................................56
7580 ............................................86
7581 ............................................67
7582-7583...................................86
7585 ............................................67
7589-7593...................................86
7594 ............................................74
7598 ............................................86
7788 ............................................46
7798 ............................................59
7799 ............................................57
7800-7880.................................127
7890-7895.................................126
8003-8005...................................27
8006 ......................................16, 26
8007 ............................................27
8008 ............................................26
8009-8012...................................27
8013 ......................................17, 19
8014-8016...................................27
8017 ............................................26
8018-8022...................................27
8024 ............................................26
8025 ....................................65, 165
8026 ............................................27
8028 ....................................80, 184
8029-8034...................................27
8035 ............................................26
8036 ............................................27

CARBURETORS

INDEX

CRATE ENGINES
WATER PUMPS
ACCESSORIES
NITROUS
FUEL PUMPS
SPORTSWEAR

214

INDEX

WWW.EDELBROCK.COM

77569-77579...............................93
77580 ........................................200
77589-77639...............................93
77730-77749...............................54
77760-77791.............................116
77839-77849.............................113
77919-77949.............................101
79009-79089.............................100
79249-79259.............................106
79449-79559...............................98
79889-79899...............................91
79939-79949...............................96
80913-81243...............................23
81263-81343...............................22
88103-88124.............................182
88143 ........................................184
88403-88544.............................183
88563 ........................................184
88584 ........................................183
88663 ........................................184
88814-88824.............................182
91147-91157.............................170
91170-91173.............................169
91238 .....................................43-44
91239 ........................................135
93669 ........................................115
97384-97387.............................126
97393-97483.............................125
98001-98095.............................208
98100-98133.............................207
98134-98143.............................208
98165-98170.............................207
98200-98207.............................209
98220-98326.............................207
140535-140546 ........................151
157320 ......................................146
174021-174043 ........................205
174051-174103 ........................203
174113 ......................................205
174121-174133 ........................203
178010 ......................................205
178040 ......................................203
178050-178060 ........................204
182031-182032 ........................205
182051-182062 ........................204
182071-182083 ........................205
285408-285748 ....................54, 99
352101 ......................................164
353101 ......................................163
354101 ......................................164
355001-355101 ........................163
386403 ......................................166
505651 ........................................78
602219-602579 ........................103
604515-604719 ..........................96
605119 ......................................109
605515-605519 ..........................98
607115-609719 ..........................91
609815-609819 ..........................93
609919 ........................................91
613268 ........................................99
613269 ......................................112
613368 ........................................99
613369 ......................................112
613668 ........................................99
613669-614369 ........................112
614468 ......................................100
614469 ......................................112
614668 ........................................99
614669 ......................................112
614768 ........................................99
614769 ......................................112
615468-618268 ........................100
618269 ......................................112
618368 ......................................100
618369-619869 ........................112
624010 ........................................22
645060-650130 ........................206
650133 ................................22, 206
650140-651670 ........................206
770469 ......................................112
770769-773169 ........................113
775069-775469 ........................111
777569-777869 ........................112

EFI

70001-70011.............................194
70021-70400.............................195
70855 ..........................................51
71011-71014...............................35
71053-71054...............................72
71101 ..........................................38
71163-71164...............................35
71187 ..........................................43
71197 ..........................................45
71211-71214...............................61
71233 ..........................................64
71363 ..........................................49
71373-71383...............................38
71393-71403...............................44
71443 ..........................................58
71561-71564...............................78
71614 ..........................................47
71811 ..........................................67
71831-71880.............................196
71900 ........................................197
71907 ........................................201
71933 ..........................................58
72000-72002.............................198
72018 ..........................................83
72050-72052.............................198
72068-72078...............................83
72176-72203.............................198
72208 ..........................................83
72209-72214.............................201
72219 ........................................198
72270 ........................................201
72271-72274.............................198
72275-72276.............................199
72277 ........................................198
72278 ........................................199
72279-72282.............................198
72283 ........................................197
72284-72294.............................198
72300-72315.............................197
72358 ..........................................83
72400 ........................................197
72550 ........................................196
72551 ........................................199
72552-72553.............................196
72555 ........................................199
72556 ................................196, 199
72557-72567.............................196
72600 ........................................197
72700-72705.............................200
72900 ........................................197
72902 ....................................30, 50
72925 ....................................30, 40
72952 ........................................200
72960-72961.............................197
72975 ....................................30, 39
73001-73012.............................199
73013-73248.............................198
73800-73832.............................200
75011-75014...............................36
75054 ..........................................72
75163-75164...............................36
75184-75187...............................43
75204 ..........................................49
75211-75214...............................62
75224 ..........................................49
75245 ..........................................59
75254-75264...............................37
75284 ..........................................56
75354 ..........................................62
75611-75624...............................48
75641 ..........................................70
75763-75764...............................55
75814-75854...............................67
75945 ..........................................74
76204 ........................................197
76503 ........................................201
76504-76507.............................200
76512-76531.............................201
76535 ........................................199
76537 ........................................201
76538 ........................................199
76544-76546.............................201
76549-76559.............................199
76568 ........................................201
76574-76578.............................199
77169-77219.............................106
77319 ........................................113
77339-77379.............................112
77389 ........................................106
77409-77429...............................98
77439 ........................................112
77459 ..........................................98
77469 ..................................98, 112
77475-77489...............................98
77549 ........................................111

SUPERCHARGERS

41623-41629.............................190
41633-41663.............................189
41713-41733.............................191
41763-41779.............................190
41803-41813.............................191
41853-41999.............................190
42133-42203.............................191
43510-43513.............................193
43600-43602.....................154, 193
43610-43662.............................193
43666 ........................ 188-189, 193
43667-43693.............................193
44023-44283.............................192
45004-45024.............................173
45060-45083.............................172
45110-45123.............................173
45260-45274.............................179
45400-45421.............................173
45464-45474.............................179
45500-45521.............................173
45600-45720.............................174
45900-45924.............................175
46040-46053.............................176
46200-46211.............................175
46213 ........................................176
46304-46324.............................174
46381-46383.............................176
46400-46424.............................174
46550 ........................................178
46600-46603.............................174
46700 ........................................176
46720-46760.............................177
46770 ........................................180
46903 ........................................175
47100-47110.............................173
47550 ........................................178
47601-47641...............................75
49273 ........................................206
49550 ........................................178
50011 ..........................................36
50159-50169...............................90
50449-50459...............................96
50561-50565...............................78
50611 ..........................................48
50665 ..................................74, 168
54084-54094...............................46
54201 ..........................................49
54251-54254...............................36
54501 ..........................................77
60037-60049...............................90
60057-60089.............................107
60107-60139...............................90
60149 ........................................101
60175-60179.............................102
60185-60189.............................101
60197-60199.............................102
60217-60399.............................103
60429-60499...............................96
60509 ................................109, 113
60515-60539.............................109
60547-60559...............................98
60569-60609.............................109
60617-60659...............................91
60665-60699.............................108
60715-60759...............................91
60767-60779.............................102
60809-60819.......................96, 100
60825-60839.............................101
60849-60909...............................91
60917-60929.............................101
60947-60959...............................91
60969 ..........................................93
60975-60979...............................91
60985-60989...............................93
60995-60999...............................91
61169-61189.............................103
61205-61259...............................93
61319-61329...............................96
61379-61389.............................110
61409-61419...............................98
61429-61439.............................112
61459 ..........................................96
61515-61539.............................109
61555-61559...............................98
61569-61599.............................109
61607-61629.............................105
61645-61669.............................108
61689-61699.............................105
61709-61739.............................102
61749 ........................................112
61767-61779.............................102
61857 ................................107, 113
61859 ........................................113
61905-61939...............................94
61989 ........................................112

POWER PACKAGES KITS

15908 ........................................144
15909 ........................................153
15910 ........................................146
15911 ........................................144
15930 ........................................146
15940 ........................................146
15956-15980.............................144
15988 ........................................154
15990 ........................................144
17923 ........................................204
17930-17937.............................205
17943 ........................................204
18014-18134...............................15
20214-20244.............................134
20254-20264.............................135
20274-20344.............................134
20354-20364.............................135
20374-20644.............................134
20654-20694.............................135
20754 ........................................134
20764-20854.............................135
21011-21043...............................34
21053 ..........................................72
21163-21164...............................34
21211-21214...............................61
21561-21563...............................77
21611-21614...............................47
21663 ..........................................73
21713 ..........................................71
21763 ..........................................55
21811-21813...............................66
21944 ..........................................74
21981 ....................................31, 78
22015-22815.............................125
23336 ........................................207
26011-26014...............................35
27011-27034...............................33
27161-27164...............................34
28001-28025...............................53
28035-28045...............................54
28055-28065...............................53
28070 ..........................................50
28095-28097...............................44
28155 ..................................56, 168
28215-28265...............................45
28385 ..........................................71
28408 ..........................................42
28455-28457...............................46
28458-28538...............................42
28540-28579...............................54
28962-28978...............................52
29020-29045...............................50
29085-29087...............................44
29135 ..........................................42
29165 ..........................................52
29245 ..........................................68
29254 ..........................................40
29270-29275...............................52
29285 ..........................................63
29365 ..........................................72
29545 ..........................................59
29565-29575...............................78
29754 ..........................................39
29785 ....................................40, 42
32220-32283.............................161
35080-35090.............................163
35210 ........................................164
35260-35310.............................163
35360-35370.............................170
35410-35453.............................164
35500-35540.............................163
35550-35693.............................164
35900-35903.............................150
35943 ........................................204
36010-36020.............................170
36031-36054.............................162
36649-36679.............................159
38112-38123.............................165
38143-38153.............................167
38183 ........................................165
38353 ..................................65, 165
38473-38493.............................167
38633-38643.............................166
38691-38693.............................165
38783 ........................................166
41103-41135.............................156
41142 ................................144, 156
41143 ........................................156
41144 ........................................144
41153-41179.............................190
41181-41183.............................192
41193-41199.............................190
41253-41263.............................191
41303-41609.............................190
41613 ........................................191

CAMSHAFT & VALVETRAIN

9178 ......................................21, 26
9179 ............................................26
9265-9267.............................19, 84
9290 ............................................80
9300 ......................................80, 83
9602 ..........................................117
9605 ..........................................115
9606 ..........................................118
9609 ..........................................115
9611-9612......................... 116-118
9614 ..........................................116
9615 .................................. 116-117
9616 .................................. 116-118
9618-9638.................................115
9644 .................................. 117-118
9646-9656.................................115
9657 .................................. 116-118
9658-9693.................................115
9701-9704.................................116
9705 ..........................................122
9706 ..........................................116
9707 .................................. 117-118
9708 ..........................................117
9709-9714.................................115
9715 .................................. 117-118
9716-9719.................................115
9720 .................................. 117-118
9721 ..........................................117
9724 ..........................................118
9725-9726.................................116
9729-9731.................................117
9733 ..........................................118
9734-9736......................... 117-118
9738 ..........................................122
9741 .................................. 117-118
9758-9759.................................116
9856-9860.................................208
10023 ........................................186
11151-11261.............................103
12370-12416...............................24
12455-12457.........................17, 24
12458-12605...............................24
112624 ..................................17, 24
12625-12635...............................24
12645-12665.........................17, 24
12685-12760...............................24
12801-12901...............................23
14053-14054...............................13
14055-14056.............................151
14063-14073...............................13
15005 ..........................................84
15028-15039.............................156
15041-15043...............................84
15111-15123.............................151
15131-15233.............................150
15270 ................................ 148-149
15300-15360.............................138
15380 ........................................139
15400 ........................................152
15401-15404.............................154
15405-15409.............................153
15410-15490.............................152
15551-15553.............................151
15600-15610.............................147
15620-15630.............................144
15640-15672.............................147
15700-15702.............................146
15709 ........................................155
15710-15712.............................146
15719 ........................................155
15720-15750.............................146
15770 ................................ 147-149
15773-15791.............................147
15800-15802.............................142
15803 ........................................154
15804-15805.............................142
15806 ........................................156
15807 ........................................153
15808 ........................................154
15810 ........................................140
15815 ................................146, 155
15818 ........................................151
15819-15827.............................155
15828 ........................................154
15829 ........................................155
15830-15840.............................140
15842-15855.............................155
15856-15896.............................142
15898 ........................................154
15900 ........................................146
15901 ........................................153
15902 ........................................146
15903-15904.............................153
15905 ........................................156
15907 ........................................153

MANIFOLDS GASKETS CYLINDER HEADS

8041 ..........................................170
8045 ..........................................183
8050-8052...................................79
8053-8057...................................26
8059 ......................................20, 27
8060 ............................................26
8062-8063...................................22
8078 ............................................79
8079 ............................................26
8080 ......................................26, 79
8081 ............................................26
8087 ......................................20, 26
8088 ......................................23, 77
8089-8090.............................20, 26
8091 ......................................23, 77
8092-8093.................................186
8094 ..........................................192
8095 ............................................80
8096 ............................................26
8101-8107...................................23
8122 ..........................................202
8123-8125...................................23
8126 ............................................22
8127 ..........................................202
8128-8135...................................22
8136 ..........................................206
8137 ............................................22
8139-8158.................................206
8167-8188...................................79
8189-8190.................................202
8191 ............................................79
8192-8195.................................202
8199 ............................................79
8502-8503.................................114
8504 ............................................79
8505 ..........................................114
8506 ....................................60, 114
8507-8509...................................79
8513 ..........................................114
8514-8529...................................79
8531-8533.................................114
8534-8536...................................79
8549-8558.................................114
8559 ............................................79
8560-8562.................................114
8564-8565...................................79
8566 ..........................................114
8569-8574...................................79
8577 ..........................................114
8579 ............................................79
8581 ..........................................114
8584 ............................................79
8591-8592.................................114
8594 ............................................79
8595-8596.................................114
8598-8599.................................115
8603-8607...........................80, 184
8700 ......................................60, 84
8710-8717...................................25
8718 ................................25, 74, 78
8719-8726...................................25
8727-8729...................................79
8751 ................................ 16-17, 25
8803-8804.................................183
8805 ..........................................184
8810-8812.................................182
8814 ..........................................184
8815 ..........................................182
8816-8819.................................185
8820-8822.................................182
8824 ..........................................184
8825 ..........................................182
8827-8828.................................185
8831-8832.................................182
8833 ..........................................185
8835 ..........................................184
8840-8854.................................183
8856 ..........................................184
8858-8864.................................183
8866-8877.................................184
8881-8882.................................182
8887 ..........................................184
8895 ..........................................185
8896-8898.................................182
8901-9129...................................79
9136-9137.................................209
9138-9139.................................210
9141 ............................................27
9142-9147.................................209
9148 ..........................................210
9149-9169.................................209
9170 ..........................................210
9171 ............................................26
9172 ......................................21, 26
9173 ..........................................210

OUR CORE PRODUCTS

ARE MADE IN THE USA

EDELBROCK, LLC
2700 CALIFORNIA STREET
TORRANCE, CA 90503

WWW.EDELBROCK.COM

Catalog #09216 Printed in the USA