7301en.

book 1

Operating Instructions
DVD Video Recorder
Model No.

Dear customer

DMR-E55

[For\U.S.A.]only]

Thank you for purchasing this product. For optimum performance

and safety, please read these instructions carefully.

The warranty can be found on page 46.

Before connecting, operating or adjusting this product, please read

these instructions completely.
Please keep this manual for future reference.

The warranty can be found on page 47.

Region number supported by this unit

La referencia rpida en espaol se puede encontrar

en la pgina 4851.

Region numbers are allocated to DVD players and software

according to where they are sold.
The region number of this unit is 1.
The unit will play DVDs marked with labels containing 1 or
ALL.
Example:

1
P

PC PX

ALL

1
2

[For\Canada]only]

Unless otherwise indicated, illustrations in these

operating instructions are of DMR-E55 for U.S.A. and
Canada.

RQT7301-1P

Getting started

7301en.book 2

CAUTION!

CAUTION!

THIS PRODUCT UTILIZES A LASER.

USE OF CONTROLS OR ADJUSTMENTS OR PERFORMANCE
OF PROCEDURES OTHER THAN THOSE SPECIFIED HEREIN
MAY RESULT IN HAZARDOUS RADIATION EXPOSURE.
DO NOT OPEN COVERS AND DO NOT REPAIR YOURSELF.
REFER SERVICING TO QUALIFIED PERSONNEL.

DO NOT INSTALL OR PLACE THIS UNIT IN A BOOKCASE,

BUILT-IN CABINET OR IN ANOTHER CONFINED SPACE.
ENSURE THE UNIT IS WELL VENTILATED. TO PREVENT
RISK OF ELECTRIC SHOCK OR FIRE HAZARD DUE TO
OVERHEATING, ENSURE THAT CURTAINS AND ANY
OTHER MATERIALS DO NOT OBSTRUCT THE VENTILATION
VENTS.
DO NOT OBSTRUCT THE UNITS VENTILATION OPENINGS
WITH NEWSPAPERS, TABLECLOTHS, CURTAINS, AND
SIMILAR ITEMS.
DO NOT PLACE SOURCES OF NAKED FLAMES, SUCH AS
LIGHTED CANDLES, ON THE UNIT.
DISPOSE OF BATTERIES IN AN ENVIRONMENTALLY
FRIENDLY MANNER.

WARNING:
TO REDUCE THE RISK OF FIRE, ELECTRIC
SHOCK OR PRODUCT DAMAGE, DO NOT
EXPOSE THIS APPARATUS TO RAIN, MOISTURE,
DRIPPING OR SPLASHING AND THAT NO
OBJECTS FILLED WITH LIQUIDS, SUCH AS
VASES, SHALL BE PLACED ON THE APPARATUS.
THE FOLLOWING APPLIES ONLY IN THE U.S.A.

Note to CATV system installer:

This reminder is provided to call the CATV system installers
attention to Article 820-40 of the NEC that provides guidelines for
proper grounding and, in particular, specifies that the cable ground
shall be connected to the grounding system of the building, as
close to the point of cable entry as practical.
THE FOLLOWING APPLIES ONLY IN THE U.S.A. and Canada

CAUTION
RISK OF ELECTRIC SHOCK
DO NOT OPEN
CAUTION: TO REDUCE THE RISK OF ELECTRIC
SHOCK, DO NOT REMOVE SCREWS.
NO USER-SERVICEABLE PARTS
INSIDE.
REFER SERVICING TO QUALIFIED
SERVICE PERSONNEL.
The lightning flash with arrowhead symbol, within
an equilateral triangle, is intended to alert the user
to the presence of uninsulated dangerous voltage
within the products enclosure that may be of sufficient magnitude to constitute a risk of electric shock
to persons.
The exclamation point within an equilateral triangle
is intended to alert the user to the presence of
important operating and maintenance (servicing)
instructions in the literature accompanying the appliance.

THE FOLLOWING APPLIES ONLY IN THE U.S.A.

FCC Note:
This equipment has been tested and found to comply with the
limits for a Class B digital device, pursuant to Part 15 of the FCC
Rules. These limits are designed to provide reasonable protection
against harmful interference in a residential installation. This
equipment generates, uses, and can radiate radio frequency
energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio
communications. However, there is no guarantee that interference
will not occur in a particular installation. If this equipment does
cause harmful interference to radio or television reception, which
can be determined by turning the equipment off and on, the user
is encouraged to try to correct the interference by one or more of
the following measures:
Reorient or relocate the receiving antenna.
Increase the separation between the equipment and receiver.
Connect the equipment into an outlet on a circuit different from
that to which the receiver is connected.
Consult the dealer or an experienced radio/TV technician for
help.
FCC Caution: To assure continued compliance, follow the
attached installation instructions and use only shielded interface
cables when connecting to peripheral devices.
Any changes or modifications not expressly approved by the party
responsible for compliance could void the users authority to
operate this equipment.
This device complies with Part 15 of the FCC Rules. Operation is
subject to the following two conditions: (1) This device may not
cause harmful interference, and (2) this device must accept any
interference received, including interference that may cause
undesired operation.

IMPORTANT SAFETY INSTRUCTIONS

Read these operating instructions carefully before using the unit. Follow the safety instructions on the unit and the applicable safety instructions
listed below. Keep these operating instructions handy for future reference.
1)
2)
3)
4)
5)
6)
7)
8)

9)

RQT7301

Read these instructions.

Keep these instructions.
Heed all warnings.
Follow all instructions.
Do not use this apparatus near water.
Clean only with dry cloth.
Do not block any ventilation openings. Install in accordance with
the manufacturers instructions.
Do not install near any heat sources such as radiators, heat
registers, stoves, or other apparatus (including amplifiers) that
produce heat.
Do not defeat the safety purpose of the polarized or groundingtype plug. A polarized plug has two blades with one wider than
the other. A grounding-type plug has two blades and a third
grounding prong. The wide blade or the third prong are
provided for your safety. If the provided plug does not fit into
your outlet, consult an electrician for replacement of the
obsolete outlet.

10) Protect the power cord from being walked on or pinched

particularly at plugs, convenience receptacles, and the point
where they exit from the apparatus.
11) Only use attachments/accessories specified by the
manufacturer.
12) Use only with the cart, stand, tripod, bracket, or
table specified by the manufacturer, or sold with
the apparatus. When a cart is used, use caution
when moving the cart/apparatus combination to
avoid injury from tip-over.
13) Unplug this apparatus during lightning storms or
when unused for long periods of time.
14) Refer all servicing to qualified service personnel. Servicing is
required when the apparatus has been damaged in any way,
such as power-supply cord or plug is damaged, liquid has been
spilled or objects have fallen into the apparatus, the apparatus
has been exposed to rain or moisture, does not operate
normally, or has been dropped.

Useful features
This DVD Video recorder records high quality images
to rapid random access capable DVD-RAM media.
This has resulted in many new features that out
perform older tape formats. The following information
summarizes a few of these features.

Instant recording
You no longer need to search for empty disc space. By
pressing the recording button, the unit finds available
recording space and begins recording right away.
There is no need to worry about overwriting already
recorded content.

Table of contents
Getting started
IMPORTANT SAFETY INSTRUCTIONS . . . . . . . . . . . . . . 2
Useful features . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3
Accessories . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4
The remote control . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4
Control reference guide . . . . . . . . . . . . . . . . . . . . . . . . . . 5
STEP 1 Connection . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6
STEP 2 Plug-in Auto Tuning . . . . . . . . . . . . . . . . . . . . . 10
STEP 3 Channel settings . . . . . . . . . . . . . . . . . . . . . . . 12
STEP 4 Set up to match your television
and remote control . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14
Disc information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15

Getting started

7301en.book 3

Recording
Recording television programs . . . . . . . . . . . . . . . . . . 16

Instant play
There is no need to rewind or search forward. Direct
Navigator guides you to the beginning of the recorded
video immediately.

Chasing playback
There is no need to wait until
recording is complete. Without
stopping recording, you can play
the video currently being
recorded from its beginning.

Simultaneous Recording
and Playback

Recording modes and approximate recording times . . . . . . . .

Selecting audio to record . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Playing while you are recording . . . . . . . . . . . . . . . . . . . . . . . .
Flexible Recording . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Recording from a video cassette recorder . . . . . . . . . . . . . . . .

Timer recording . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19
Using VCR Plusr number to make timer recordings . . . . . . . . 19
Manually programming timer recordings . . . . . . . . . . . . . . . . . 20
Check, change or delete a program . . . . . . . . . . . . . . . . . . . . . 21

Playing back
Playing discs . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22
Operations during play . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 23
Editing operations during play . . . . . . . . . . . . . . . . . . . . . . . . . 24
Changing audio during play . . . . . . . . . . . . . . . . . . . . . . . . . . . 24

Using menus to play MP3 . . . . . . . . . . . . . . . . . . . . . . . 25

Using on-screen menus . . . . . . . . . . . . . . . . . . . . . . . . 26

While recording, you can play

another video program that was
recorded previously.

Common procedures . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Disc menuSetting disc content . . . . . . . . . . . . . . . . . . . . . . . .
Play menuChange play sequence . . . . . . . . . . . . . . . . . . . . .
Video menuChange picture quality. . . . . . . . . . . . . . . . . . . . .
Audio menuChange sound effect . . . . . . . . . . . . . . . . . . . . . .

Time Slip

Editing

During play and also while

recording, you can jump to the
scene you wish to view by
specifying the skip time.

Manufactured under license from Dolby Laboratories.

Dolby and the double-D symbol are trademarks of Dolby
Laboratories.
DTS and DTS 2.0 i Digital Out are trademarks of Digital
Theater Systems, Inc.
Apparatus Claims of U.S. Patent Nos. 4,631,603, 4,577,216, and
4,819,098, licensed for limited viewing uses only.
This product incorporates copyright protection technology that is
protected by method claims of certain U.S. patents and other
intellectual property rights owned by Macrovision Corporation
and other rights owners. Use of this copyright protection
technology must be authorized by Macrovision Corporation, and
is intended for home and other limited viewing uses only unless
otherwise authorized by Macrovision Corporation. Reverse
engineering or disassembly is prohibited.
MPEG Layer-3 audio decoding technology licensed from
Fraunhofer IIS and Thomson multimedia.
VCR Plusi and PlusCode are registered trademarks of Gemstar
Development Corporation. The VCR Plusi system is
manufactured under license from Gemstar Development
Corporation.
Pats. 5,307,173; 5,335,079; 4,908,713; 4,751,578; and
4,706,121

17
17
17
18
18

26
26
27
27
27

Editing titles/chapters . . . . . . . . . . . . . . . . . . . . . . . . . . 28
Editing titles/chapters and playing chapters . . . . . . . . . . . . . . . 28
Title operations . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 29
Chapter operations . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 29

Creating, editing and playing play lists . . . . . . . . . . . . 30

Creating play lists . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Editing and playing play lists/chapters . . . . . . . . . . . . . . . . . . .
Play list operations . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Chapter operations . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

30
31
31
31

Convenient functions
Disc setting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 32
Disc Name . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Disc Protection . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Format disc . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Select First play . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Finalize . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

33
33
33
33
33

Entering text . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 34
FUNCTIONS window and Status messages . . . . . . . . . 35
FUNCTIONS window . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 35
Status messages . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 35

Changing the units settings . . . . . . . . . . . . . . . . . . . . . 36

Summary of settings. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 36
Common procedures . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 38
Clock settings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 38

Reference
Specifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 39
Maintenance . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 39
Glossary . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 40
Frequently asked questions . . . . . . . . . . . . . . . . . . . . . 41
Error messages . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 42
Troubleshooting guide . . . . . . . . . . . . . . . . . . . . . . . . . 43
Product Service . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 45
Limited Warranty (ONLY FOR U.S.A.) . . . . . . . . . . . . . . 46
Limited Warranty (ONLY FOR CANADA) . . . . . . . . . . . 47
Referencia rpida en espaol . . . . . . . . . . . . . . . . . . . . 48
(Spanish Quick Reference)
Index . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Back cover

RQT7301

7301en.book 4

Accessories

Getting started

Please check and identify the supplied accessories. Use numbers indicated in parentheses when asking for replacement parts.
Only for U.S.A.: To order accessories, refer to Accessory Purchases on page 46.
For other areas:To order accessories, call the dealer from whom you have made your purchase.

1 Remote control
(N2QAKB000050)

1 AC power supply cord

[For\U.S.A.\and\Canada]
(K2CB2CB00006)

[For\units\with\PX\printed\on\the\outer\packaging]
(RJA0019-2K)

1 75 coaxial cable
(VJA1125)

For use with this unit only. Do not use it with other equipment.

[For\units\with\PX\printed\on\the\outer\packaging]

2 Batteries
for remote control

1 Audio/video cable
(K2KA6CA00001)

1 Power plug adaptor

(K2DA42E00001)

(U.S.A. only)
Product Registration Card
Please complete and return the included product registration card, or register via the Internet at: http://www.prodreg.com/panasonic/

The remote control

Batteries

Use
R6, LR6, AA, UM-3

Remote control signal sensor

20
30

20
30

Insert so the poles (i and j) match those in the remote control.

Do not use rechargeable type batteries.
Do not mix old and new batteries.
Do not use different types at the same time.
Do not heat or expose to flame.
Do not take apart or short circuit.
Do not attempt to recharge alkaline or manganese batteries.
Do not use batteries if the covering has been peeled off.

7 m (23 feet) directly in front of the unit

Mishandling of batteries can cause electrolyte leakage which can

damage items the fluid contacts and may cause a fire.
Remove if the remote control is not going to be used for a long
period of time. Store in a cool, dark place.

[Note]
If you cannot operate the unit or television using the remote control
after changing the batteries, please re-enter the codes ( page 14).

The manufacturer accepts no responsibility and offers no compensation for loss of recorded or edited material due to a problem
with the unit or recordable media, and accepts no responsibility and offers no compensation for any subsequent damage caused by
such loss.
Examples of causes of such losses are
A disc recorded and edited with this unit is played in a DVD recorder or computer disc drive manufactured by another company.
A disc used as described above and then played again in this unit.
A disc recorded and edited with a DVD recorder or computer disc drive manufactured by another company is played in this unit.
RQT7301

7301en.book 5

Control reference guide

Remote control
TV
POWER

INPUT SELECT TV/VIDEO

VOLUME

CH

Getting started

DVD POWER

Turn the unit on ( page 10)

Television operations ( page 14)

Input select (L1, L2 or L3)

Select channels and title numbers etc./

Enter numbers

CH

Channel select ( page 11, 16)

AUDIO

9
VCR Plus+ CM SKIP

CANCEL

Cancel

0
SKIP

STOP

SLOW/SEARCH

PAUSE

Select audio ( page 17, 24)

Skip a minute forward ( page 23)
Show VCR Plusr screen ( page 19)

PLAY/x1.3

Basic operations for recording and play

DIRECT NAVIGATOR

Show Top menu/Direct Navigator

( page 22, 28)

FUNCTIONS

Show FUNCTIONS window ( page 35)

TOP MENU

Selection/Enter, Frame-by-frame ( page 10, 23)

ENTER
SUB MENU

Show sub menu ( page 28)

RETURN

Return to previous screen

Show on-screen menu ( page 26)

PROG/CHECK DISPLAY

Show timer recording program screen ( page 20)

STATUS TIME SLIP

Erase items ( page 24)

ADD/DLT

Add/delete channel ( page 11)

ERASE REC MODE

REC

OPEN/CLOSE SETUP CHAPTER

F Rec

Show status messages ( page 35)

Skip the specified time/Display the television image
as a picture-in-picture ( page 17, 23)
Change recording mode ( page 16)

Open/close disc tray ( page 16, 22)

Show SETUP menu ( page 11, 38)

Start recording ( page 16)

Start Flexible Recording ( page 18)
Create chapters ( page 24)

Main unit
POWER button (POWER /I) ( page 10)
Press to switch the unit from on to standby mode or
vice versa. In standby mode, the unit is still
consuming a small amount of power.
Disc tray ( page 16, 22)

Start play ( page 22)

Start recording ( page 16)
Remote control signal sensor

Stop ( page 16, 22)

Open/close disc tray ( page 16, 22)
OPEN/CLOSE

REC
POWER
TIME SLIP
PULL OPEN

/x1.3

TIME SLIP

L2

S-VIDEO IN

VIDEO IN

L/MONO AUDIO IN

CH

Display ( below)
Connection for camcorder etc.
( page 18)

Time Slip indicator ( page 17)

Skip the specified time/Display the television image

as a picture-in-picture ( page 17, 23)
Channel select ( page 11, 16)
Skip/Slow/Search ( page 23)

Rear panel terminals ( page 7)

The units display

Recording mode
Timer recording indicator
XP
SP
LP
EP CH

Channel

D.MIX (multi-channel DVD-Audio only)

When lit: Down-mixed audio is played.
Disc type When off: The disc prevents down-mixing so only the two front
channels can be played.
Recording/
Recording
Playback
DVD - R AM
Playback
VCD.MIX

PLAY REC
Main display section

REC

PLAY

PLAY REC
RQT7301

7301en.book 6

STEP 1 Connection
Examples of equipment you can connect to this units terminals

Getting started

Television

Amplifier

From AUDIO/VIDEO
OUT terminals

From AUDIO OUT terminals or

DIGITAL AUDIO OUT terminal

This unit
To L1 or L3 input
terminals (rear)

To L2 input
terminals (front)

Video cassette recorder

Camcorder

Other equipment

Do not place the unit on

amplifiers or equipment
that may become hot.

When the unit is not to be used for a long time

To save power, unplug it from the household AC outlet. This unit
consumes a small amount of power, even when it is turned off
(approx. 2.9 W).

The heat can damage the unit.

[For\units\with\PX\printed\on\the\outer\packaging]
If the power plug does not fit your AC
outlet, use the power plug adaptor
(included). If it still doesnt fit, contact
an electrical parts distributor for
assistance.

Before moving the unit, ensure the disc tray is empty.

Failure to do so will risk severely damaging the disc and the
unit.

RQT7301

7301en.book 7

The equipment connections described are examples.

Before connection, turn off all equipment and read the appropriate operating instructions.
Peripheral equipment and optional cables sold separately unless otherwise indicated.

14

indicates included accessories.

indicates accessories not included.
are required connections. Connect in the numbered order.
Television
Cable TV

When making this connection,

ensure you connect the audio
cables to the corresponding
audio input terminals on the
television.

Getting started

Connecting a television and VCR

Outdoor
antenna

AC power supply cord

Connect only after all other
connections are complete.

AUDIO IN
R L VIDEO IN S VIDEO IN

VHF/UHF
RF IN

COMPONENT
VIDEO IN

Indoor
antenna

Red White Yellow

Audio/Video
cable

75 coaxial cable
below
Component
video cable

S-Video
cable

To the
antenna

Antenna
cable

To household AC outlet

Splitter

1
RF IN

PB

S-VIDEO

R - AUDIO - L

VIDEO S-VIDEO

(L1)

COMPONENT
VIDEO OUT
(480P/480I)

IN3

VIDEO

VIDEO S-VIDEO

PR

OPTICAL

OUT

R - AUDIO - L

R - AUDIO - L

IN1

Red White Yellow

DIGITAL AUDIO OUT

(PCM/BITSTREAM)

RF OUT
VHF/UHF

(L3)

Red White Yellow

Cooling fan

This unit

To L1 or L3

S-VIDEO OUT terminal

The S-VIDEO OUT terminal achieves a more vivid picture than
the VIDEO OUT terminal. (Actual results depend on the
television.)

Audio/Video
cable

Use a splitter if you also

want to connect the
antenna to your VCR.

COMPONENT VIDEO OUT terminal

These terminals can be used for either interlace or progressive output
( page 40) and provide a purer picture than the S-VIDEO OUT terminal.
Connect to terminals of the same color.

75 coaxial cable
The picture and sound signal from this unit does not go through the
75 coaxial cable to the television. Make sure you connect one of
the following terminals on this unit to the television: the AUDIO/
VIDEO OUT terminal, the S-VIDEO OUT terminal or the
COMPONENT VIDEO OUT terminal. If the television has none of
these terminals, consult your local dealer.
Refer to page 8 if the antenna connector doesnt match.

75 coaxial
cable

Red White Yellow

VIDEO
R
L
AUDIO OUT OUT

Video cassette recorder

VHF/UHF
RF IN

Do not connect the unit through a video cassette recorder

Video signals fed through video cassette recorders will be affected
by copyright protection systems and the picture will not be shown
correctly on the television.
Television

Television

This unit

VCR

VCR

This unit

When connecting to a television with a built in VCR, connect to

the input terminals on the television side, not the VCR side.

RQT7301

7301en.book 8

STEP 1 Connection
Connecting a cable TV box/satellite receiver
Getting started

You need to subscribe to a cable TV or satellite TV service, to enjoy viewing their programming.
Consult your service provider regarding appropriate cable TV box or satellite receiver.
To AUDIO/VIDEO IN
Audio/video cable

Television

To VHF/UHF RF IN

75 coaxial cable

You can record and view simultaneously scrambled and

unscrambled channels if connections are made as shown in the
diagram below.

To AUDIO/VIDEO IN
Audio/video cable

Television

To VHF/UHF RF IN

RF IN

S-VIDEO

R - AUDIO - L

VIDEO S-VIDEO

PR

COMPONENT
VIDEO OUT
(480P/480I)

RF IN

IN3

VIDEO

75 coaxial cable

(L1)

OPTICAL

OUT

R - AUDIO - L

PB

VIDEO S-VIDEO

IN1

R - AUDIO - L

DIGITAL AUDIO OUT

(PCM/BITSTREAM)

RF OUT
VHF/UHF

(L3)

VIDEO

VIDEO S-VIDEO

COMPONENT
VIDEO OUT
(480P/480I)

S-VIDEO

R - AUDIO - L

VIDEO S-VIDEO

IN3

Satellite receiver

R - AUDIO - L

PR

OPTICAL

OUT

R - AUDIO - L

Cable TV box

PB

IN1

This unit

(L1)

DIGITAL AUDIO OUT

(PCM/BITSTREAM)

RF OUT
VHF/UHF

(L3)

This unit
Cable TV box
OUT

or
OUT

IN

OUT

IN

IN

IN

2-way splitter

From antenna or
cable TV jack

OUT2

From satellite
dish antenna

OUT1

Cable TV box
IN

OUT

IN

From cable TV jack

For more information on connections ( page 7)

If the antenna connector doesnt match

Other antenna connections to the unit

Other antenna connections from the unit to the

television

Use one of the following connections to suit the antenna lead.

If your television has both lead and coaxial VHF terminals, use
the lead connection to minimize signal loss.

Use one of the following connections to suit the antenna terminals

on your television. Refer to the televisions operating instructions.

A single twin lead

A twin lead and coaxial plug terminal

from the antenna

(Flat) Twin lead
300 cable

30075 transformer

VHF/UHF band separator

To this units RF IN
terminal

from the antenna

75300 transformer
VHF/UHF band mixer

(Flat) Twin lead 300 cable

To this units RF IN
terminal

75 coaxial cable

VHF or
UHF
Television

Two twin lead terminals

VHF/UHF band separator

VHF
UHF

75 coaxial cable

Two twin leads

from the antenna

Television

Multiple antenna terminals

VHF/UHF band mixer

(Flat) Twin lead

300 cable
30075 transformer

UHF
Television

75 coaxial cable

A twin lead terminal

A twin lead and a coaxial cable

(Round)
75 coaxial cable

VHF

To this units RF
IN terminal

Connect to one of the ANT terminals, then change the televisions

setting as necessary.
Television
Split out
ANT 1
75 coaxial cable
ANT 2

RQT7301

7301en.book 9

Connecting an amplifier or system component

To enjoy multi-channel surround sound on
DVD-Video

Amplifiers rear panel

Connect an amplifier with a built-in decoder

displaying these logo marks using an optical digital
audio cable and change the settings in Digital Audio
Output ( page 37).

AUDIO IN
R L

You cannot use DTS Digital Surround decoders not suited to

DVD.
Even if using this connection, output will be only 2 channels when
playing DVD-Audio.

Red White

Getting started

Connection to a stereo amplifier

Amplifiers rear panel

OPTICAL IN
Audio cable
Insert fully, with this
side facing up.

Optical digital audio

cable
Do not bend sharply
when connecting.

This unit

RF IN

S-VIDEO

VIDEO S-VIDEO

R - AUDIO - L

VIDEO S-VIDEO

(L1)

COMPONENT
VIDEO OUT
(480P/480I)

IN3

VIDEO

R - AUDIO - L

PR

OPTICAL

OUT

R - AUDIO - L

PB

IN1

Red White

DIGITAL AUDIO OUT

(PCM/BITSTREAM)

(L3)

RF OUT
VHF/UHF

RQT7301

7301en.book 10

STEP 2 Plug-in Auto Tuning

POWER /I
OPEN/CLOSE

REC
POWER

Getting started

TIME SLIP

/x1.3

TIME SLIP

CH

X CH W

Preparation
Turn on the television and select the appropriate video input to
suit the connections to this unit.
If you connect the unit through a cable TV box or satellite receiver
( page 8), tune to your local PBS for Auto Clock Setting to work.
If there is no local PBS, set the clock manually ( page 38,
Manual Clock Setting).

1
DVD POWER

DVD POWER

Press [ DVD POWER].

TV
POWER

INPUT SELECT TV/VIDEO

Select Language
Seleccione la Lengua
Slection de Langue

VOLUME

CH

English
Espaol

Numbered
buttons

CH

Franais

W X CH

Press ENTER
Pulse ENTER
Appuyer sur ENTER

AUDIO
VCR Plus+ CM SKIP

CANCEL

0
SKIP

SLOW/SEARCH

STOP

PAUSE

PLAY/x1.3

DIRECT NAVIGATOR

Press [3, 4] to select the language

and press [ENTER].

Press [ENTER] to start Plug-in Auto

Tuning.

FUNCTIONS

TOP MENU

3421
ENTER

ENTER
SUB MENU

RETURN

PROG/CHECK DISPLAY

ADD/DLT

Auto Channel Setting

RETURN

STATUS TIME SLIP

ERASE REC MODE

REC

OPEN/CLOSE SETUP CHAPTER

F Rec

CH.

Auto Channel Setting

Proceeding . . .
1 1 1

ADD/DLT
SETUP

The unit then proceeds with Auto Clock Setting. The time is
displayed when finished.
Auto Clock Setting

After plugging the unit into your household AC outlet and pressing
[ DVD POWER] to turn the unit on for the first time, the unit
assists you to set the on-screen language, and automatically tunes
in all the channels it can receive and sets the clock.

Auto Clock Setting is complete.

4/4/2002 12:15 AM
DST............. ON
TIME ZONE.... CST

The unit automatically determines the type of transmission

(airwaves or cable) and puts them into channels as follows.
Band
TV Mode
(Airwaves)

CATV Mode
(Cable)

VHF

213

UHF

1469

VHF

213

CATV LOW BAND

9599

CATV MID/SUPER BAND

1436

CATV HYPER BAND

3765

ULTRA BAND
SPECIAL CATV CHANNEL

RQT7301

10

Channel

6694
100125
1

DST, Daylight Saving Time, shows the summertime

setting.
TIME ZONE shows the time difference from Greenwich
meantime (GMT).
EST (Eastern Standard Time) l GMT j5
CST (Central Standard Time) l GMT j6
MST (Mountain Standard Time) l GMT j7
PST (Pacific Standard Time)
l GMT j8
AST (Alaska Standard Time) l GMT j9
HST (Hawaii Standard Time) l GMT j10
For other areas: xx hr

Press [ENTER].

If the clock is an hour slower or faster than the

actual time

Adding and deleting channels

Select s1 or r1 in Time Zone Adjust in the SETUP menu

( page 38).

Add or delete channels if necessary channels are not set or

unnecessary channels are set.

If the unit couldnt set the clock automatically

Set the time manually ( page 38, Manual Clock Setting).

To start Plug-in Auto Tuning again (after

relocation, for example)

Units display
TV Mode (Airwaves)
e.g., 5:
[0] [5]
15:
[1] [5]
CATV Mode (Cable)
e.g., 5:
[0] [0] [5]
15:
[0] [1] [5]
115:
[1] [1] [5]

Antenna system, channel caption, and VCR Plusr guide

channel settings all revert to the default values when you
perform the procedure below. Timer recording settings are
also cleared.
When the unit is on and stopped
1 Press and hold [X CH] and [W CH] on the main unit for
about five seconds.
The unit turns off.
2 Press [ DVD POWER] to turn the unit on.

Press the numbered buttons to select

a channel.

CH

Getting started

7301en.book 11

You can also use [W X CH] when you are going to delete a
channel.

Press [ADD/DLT].
e.g., The channel is deleted.

If Plug-in Auto Tuning fails

CHANNEL 15 DELETED

Press [SETUP].
SETUP

Channel
Set Up
Disc
Video
Audio
Display
TV Screen

Antenna System

CATV

Auto Channel Setting

Channel Captions
Preset Channel Captions
Manual Channel Captions
VCR Plusi CH Setting

Press [3, 4] to select Channel and

press [1].

Press [3, 4] to select Antenna

System and press [ENTER].
SETUP

Antenna System

TV
Channel
Set Up
Disc
Video
Audio
Display
TV Screen

4
5
6

CATV

Press [3, 4] to select TV or

CATV and press [ENTER].
Press [3, 4] to select Auto Channel
Setting and press [ENTER].
Press [ENTER].
Auto Channel Setting starts. This takes a few minutes.

Press [ENTER].

To cancel partway
Press [RETURN].
To exit the screen
Press [SETUP].

RQT7301

11

7301en.book 12

STEP 3 Channel settings

1
DVD POWER

TV
POWER

SETUP

Getting started

VOLUME

CH

INPUT SELECT TV/VIDEO

Channel
Set Up
Disc
Video
Audio
Display
TV Screen

CH
AUDIO

Antenna System

VCR Plusi CH Setting

0
SKIP

SLOW/SEARCH

STOP

PAUSE

Press [3, 4] to select Channel and

press [1].

Press [3, 4] to select VCR Plusr

CH Setting and press [ENTER].

FUNCTIONS

TOP MENU

3421
ENTER

ENTER
SUB MENU

RETURN

PROG/CHECK DISPLAY

ADD/DLT

PLAY/x1.3

DIRECT NAVIGATOR

e.g., Antenna System is set to CATV.

RETURN

SETUP

STATUS TIME SLIP

ERASE REC MODE

REC

OPEN/CLOSE SETUP CHAPTER

F Rec

VCR PlusiCH Setting

Guide Channel CATV Channel

Channel
Set Up
Disc
Video
Audio
Display
TV Screen

SETUP

4
VCR Plusi guide channel settings
Set these guide channels so you can use the VCR Plusi
programming number for timer recording. Before starting the
settings, prepare a chart showing the channels, station names, and
guide channels.

125

---

---

2
3

-----

Press [3, 4] to select the guide

channel you want to set and press
[1].
When selecting the guide channel, press and hold [3, 4] to
scroll the screen up and down.
SETUP

e.g.,

VCR PlusiCH Setting

Guide Channel CATV Channel

Station
name

Guide
channel

Channel
number

CBS

04

04

Unnecessary

HBO

33

15

Enter channel 15 next

to Guide Channel 33.

Nickelodeon

38

20

Enter channel 20 next

to Guide Channel 38.

Look up the guide channels

for the stations in
magazines.

Channel
Set Up
Disc
Video
Audio
Display
TV Screen

Channel setting

Write down all the stations

you can receive.

If you have connected a cable TV box or satellite receiver, the

VCR Plusi system does not work so you do not have to set the
guide channels.

4
5

-----

---

7
8

-----

Press [3, 4] to select the channel

corresponding to the guide channel
and press [2].
To delete a number, press [ CANCEL].
Repeat steps 4 and 5 to enter other channels.

Press [ENTER].

To exit the screen

Press [SETUP].
To return to the previous screen
Press [RETURN].

RQT7301

12

CATV

Auto Channel Setting

Channel Captions
Preset Channel Captions
Manual Channel Captions

VCR Plus+ CM SKIP

CANCEL

CANCEL

Press [SETUP].

7301en.book 13

Channel captions

Press [SETUP].
SETUP

Channel
Set Up
Disc
Video
Audio
Display
TV Screen

Getting started

You can give the preset captions, or manually enter new ones yourself.
The captions you enter are displayed when the channel is displayed and in the Direct Navigator screen.

Antenna System

CATV

Auto Channel Setting

Channel Captions
Preset Channel Captions
Manual Channel Captions
VCR Plusi CH Setting

Press [3, 4] to select Channel and press [1].

Preset Channel Captions

Press [3, 4] to select Preset

Channel Captions and press
[ENTER].
SETUP

Channel
Set Up
Disc
Video
Audio
Display
TV Screen

Manual Channel Captions

Preset Captions
Caption

Channel Number

GLOB

---

ABC

---

PBS
CBS

-----

Press [3, 4] to select Manual

Channel Captions and press
[ENTER].

Press [3, 4] to select the channel

and press [1].
Channels are only displayed if they contain a station and if
preset captions have not been added.

You can choose from the following characters:

AZ, 09, -, &, !, /, (space)
To delete the caption, press [ CANCEL].
Repeat this step to enter the other characters.

Press [3, 4] to select the caption

and press [1].
You can choose from the following captions.
ABC, PBS, CBS, CNN, FOX, ESPN, NBC, HBO, A&E, AMC,
FAM, MAX, MTV, SHOW, TBS, USA, TNT, CBC, UPN, CTV,
WB, TSN, DSC, GLOB
When selecting the caption, press and hold [3, 4] to
scroll up and down the screen.

Press [3, 4] to select the channel

corresponding to the caption and
press [2].
Channels are only displayed if they contain a station and if
captions have not been added manually.
To delete the channel number, press [ CANCEL].

SETUP

Press [ENTER].

Manual Captions
Channel Number

Caption

6
8

-------

10

AAAA

12
23

-------

Channel
Set Up
Disc
Video
Audio
Display
TV Screen

Press [2, 1] to return to the

Channel Number column.
Repeat steps 46 to enter other channels.

Repeat steps 4 and 5 to enter other channels.

Press [3, 4] to select the first

character and press [1].

Press [ENTER].

To exit the screen

Press [SETUP].
To return to the previous screen
Press [RETURN].

RQT7301

13

7301en.book 14

STEP 4 Set up to match your television and remote control

Television operation
Getting started

DVD POWER

TV
POWER

INPUT SELECT TV/VIDEO

Numbered
buttons

VOLUME

CH

TV operation
buttons

While pressing [ POWER TV], enter the

code with the numbered buttons.

CH

e.g., 01: [0] [1]

Manufacturer and Code No.

AUDIO

Panasonic
National
QUASAR

VCR Plus+ CM SKIP

CANCEL

0
SKIP

SLOW/SEARCH

STOP

PAUSE

PLAY/x1.3

DIRECT NAVIGATOR

FUNCTIONS

TOP MENU

3421
ENTER

ENTER
SUB MENU

RETURN

PROG/CHECK DISPLAY

ADD/DLT

RETURN

STATUS TIME SLIP

ERASE REC MODE

REC

OPEN/CLOSE SETUP CHAPTER

F Rec

You can configure the remote control TV operation buttons to turn

the television on/off, change the television input mode, select the
television channel and change the television volume.
Point the remote control at the television

01, 02

PHILIPS (RC-5)

03

RCA

05

SAMSUNG

14, 18, 19
10

FISHER

10

SANYO

GE

05

SHARP

06, 07

GOLDSTAR

15, 16, 17

SONY

08

HITACHI

12

SYLVANIA

03

JVC

11

THOMSON

05

LG

15, 16, 17

TOSHIBA

09

MAGNAVOX

03

ZENITH

04

MITSUBISHI

13

Test by turning on the television and changing channels. Repeat

the procedure until you find the code that allows correct operation.
If your television brand is not listed or if the code listed for your
television does not allow control of your television, this remote
control is not compatible with your television.

SETUP

When other Panasonic products

respond to this remote control
Selecting television type
You do not have to change the setting when connected to a 4:3
standard aspect television that is not compatible with progressive
output ( page 40).

1
2
3

Press [SETUP].
Press [3, 4] to select TV Screen
and press [1].
Press [3, 4] to select TV Type and
press [ENTER].
TV Type

SETUP

Change the remote control code on the main unit and the remote
control (the two must match) if you place other Panasonic products
close together.
Use 1, the factory set code, under normal circumstances.

1
2
3
4

Aspect 4:3 & 480I

Aspect 16:9 & 480I
Aspect 16:9 & 480P

4:3

16:9

4:3 standard aspect

16:9 widescreen
television
television
480P/480I:
Select 480P if the television is compatible with
progressive output.

Press [3, 4] to select the item and

press [ENTER].

To exit the screen

Press [SETUP].
RQT7301

14

To return to the previous screen

Press [RETURN].

Channel
Set Up
Disc

Aspect 4:3/Aspect 16:9:

Press [3, 4] to select Set Up and

press [1].
Press [3, 4] to select Remote
Control Code and press [ENTER].
Press [3, 4] to select the code (1, 2,
or 3) and press [ENTER].
SETUP

Aspect 4:3 & 480P

Channel
Set Up
Disc
Video
Audio
Display
TV Screen

Press [SETUP].

Remote Control Code

Press and ENTER together

for more than 2 seconds on the remote.

While pressing [ENTER], press and

hold the numbered button ([1], [2] or
[3]) for more than 2 seconds.
Press [ENTER].

When the following indicator appears on the

units display
The units remote control code
Change the code on the remote control to match the main units (step 5).

7301en.book 15

Disc information
Discs you can use for recording and play (12 cm/8 cm)
Disc type

Logo

Instructions
You can record up to 16 hours [in EP (8H) mode on double-sided disc. You cannot
record or play continuously on two sides.] ( page 17, Recording modes and
approximate recording times).
You can perform chasing playback ( page 17).
Scratch and dust resistant cartridge discs and large capacity double sided discs
(9.4GB) are commercially available.
You can record digital broadcasts that allow One time only recording when using
CPRM (Content Protection for Recordable Media) compatible discs ( page 40).

DVD-RAM
4.7 GB/9.4 GB, 12 cm (5z)
2.8 GB, 8 cm (3z)
Indicated in these instructions
with [RAM]

DVD-R
4.7 GB, 12 cm (5z), 1.4 GB, 8
cm (3z) for General Ver. 2.0
4.7 GB, 12 cm (5z) for General
Ver. 2.0/4k-SPEED DVD-R
Revision 1.0
[DVD-R]

Getting started

Re-writable discs

One time recording discs (recordable until the disc is full)

You can record up to 8 hours [in EP (8H) mode].
By finalizing the disc, you can play it in a DVD player as DVD-Video (Play only)
( page 33, 40).
You cannot record digital broadcasts that allow One time only recording.
This unit is compatible with 1k4k recording speed discs.

We recommend using Panasonic discs. DVD-R from other manufacturers may not be recorded or played due to the condition of the recording.

Which should I use, DVD-RAM or DVD-R?

The following chart indicates the differences. Select based upon what you require.
1
You can erase, enter name and change thumbnail. Available
(:Possible, t:Impossible)
DVD-RAM
DVD-R
space does not increase after erasing.
2 Only on DVD-RAM compatible players.
Re-writable

t
3 After finalizing the disc ( page 33, 40).
Edit

1
4 Only one is recorded ( page 37, Select MTS).
Play on other players
3
2
5
CPRM ( page 40) compatible discs only.
Recording both Main and SAP of

t4
6 The picture is recorded in 4:3 aspect.
MTS broadcast
Protection [RAM] (Cartridge discs)
Recording broadcasts that allow
t
5
With the write-protect tab in the protect position, you
one copy
cannot record to, edit, or erase from the disc.
Recording 16:9 aspect picture

6
Play automatically starts when inserted in the unit.
PROTECT

Play-only discs (12 cm/8 cm)

Disc type

Logo

Instructions

Disc handling
How to hold a disc
Do not touch the recorded surface.

DVD-Audio
[DVD-A]

DVD-Video
[DVD-V]

Video CD
[VCD]

High fidelity music discs

Played on this unit in 2 channels.

High quality movie and

music discs

Music and video recorded (including

CD-R/RW)

If there is dirt or condensation on the disc

[RAM] [DVD-R]
Clean with an optional DVD-RAM/PD disc cleaner (LF-K200DCA1,
where available).
Do not use cleaners for CDs or cloths.
[DVD-A] [DVD-V] [VCD] [CD]
Wipe with a damp cloth and then wipe dry.

Handling precautions
Audio CD
[CD]

Music and audio recorded (including

CD-R/RW)
CD-R and CD-RW with music
recorded in MP3 ( page 25)

This unit plays CD-R/CD-RW (audio recording discs). Close the

sessions or finalize the disc after recording. Play may be
impossible on some CD-R or CD-RW discs due to the condition of
the recording.
The producer of the material can control how discs are played. So
you may not always be able to control play as described in these
operating instructions. Read the discs instructions carefully.

Discs that cannot be played

2.6 and 5.2 GB DVD-RAM, 12 cm (5z)
3.95 and 4.7 GB DVD-R for Authoring
Unfinalized DVD-R recorded on other equipment ( page 40, Finalize)
PAL discs (you can still play the audio on DVD-Audio)
DVD-Video with a region number other than 1 or ALL
DVD-ROM, DVD-RW, iR, iRW, CD-ROM, CDV, CD-G, Photo CD,
CVD, SVCD, SACD, MV-Disc, PD, Divx Video Disc, etc.

Do not attach labels or stickers to discs. (This may cause disc

warping and un-balanced rotation, rendering it unusable.)
Do not write on the label side with a ball-point pen or other writing
instrument.
Do not use record cleaning sprays, benzine, thinner, static
electricity prevention liquids or any other solvent.
Do not use scratch-proof protectors or covers.
Do not use the following discs:
Discs with exposed adhesive from removed stickers or labels
(rented discs etc).
Discs that are badly warped or cracked.
Irregularly shaped discs, such as heart
shapes.
Do not place in the following areas:
In direct sunlight.
In very dusty or humid areas.
Near a heater.

RQT7301

15

7301en.book 16

Recording television programs

Press [W X CH] to select the channel.

DVD - R AM

SP
CH

OPEN/CLOSE

REC

To select with the numbered buttons:

TV Mode (Airwaves)
e.g., 5:
[0] [5]
15:
[1] [5]
CATV Mode (Cable)
e.g., 5:
[0] [0] [5]
15:
[0] [1] [5]
115:
[1] [1] [5]

POWER
TIME SLIP

/x1.3

PULL OPEN

TIME SLIP

L2

S-VIDEO IN

VIDEO IN

L/MONO AUDIO IN

CH

Time Slip indicator

Recording

L2 input terminals

TIME SLIP
DVD POWER

TV
POWER

INPUT SELECT TV/VIDEO

VOLUME

CH

Select the audio to record ( page 17).

INPUT SELECT

Numbered
buttons

3
CH
AUDIO

Press [REC MODE] to select the

recording mode (XP, SP, LP, or EP).
DVD - R AM

XP

AUDIO

VCR Plus+ CM SKIP

CANCEL

CH

SKIP

SLOW/SEARCH

Remaining time on the disc

STOP

;
DIRECT
NAVIGATOR

PAUSE

PLAY/x1.3

1
DIRECT NAVIGATOR

Press [ REC] to start recording.

DVD - R AM

XP

REC

TOP MENU

3421
ENTER

ENTER
SUB MENU

RETURN

PROG/CHECK DISPLAY

ADD/DLT

FUNCTIONS

STATUS TIME SLIP

ERASE REC MODE

REC

OPEN/CLOSE SETUP CHAPTER

F Rec

RETURN
STATUS
TIME SLIP

3
4
F Rec

CH

Recording will take place on open space on disc. Data will not
be overwritten.
You cannot change the channel or recording mode during
recording.

To stop recording
Press [].
Recorded as 1 title until the position where stopped.
[DVD-R]
It takes about 30 seconds for the unit to complete recording
management information after recording finishes.

[RAM] [DVD-R]
It is not possible to record continuously from one side of a double
sided disc to the other. You will need to eject the disc and turn it
over.
When using 8 cm (3) DVD-RAM, remove the disc from the
cartridge.
You can record up to 99 titles on one disc.
It is not possible to record CPRM ( page 40) protected material
onto DVD-R or 2.8 GB DVD-RAM discs.

Press [< OPEN/CLOSE] to open the

tray and insert a disc.
Press the button again to close the tray.
Insert label-up.
Insert fully so it clicks
into place.

To pause recording
Press [;].
Press again to restart recording.
(Title is not split into a separate title.)

To specify a time to stop recording

During recording

Press [ REC] to select the recording time.

Each time you press the button:
0:30 "# 1:00 "# 1:30 "# 2:00 "# 3:00 "# 4:00
^"""""""""""" Counter (cancel) ,"""""""""""}
This does not work during timer recordings ( page 19) or while
using Flexible Recording ( page 18).

Off Timer
The unit switches to standby after about 6 hours in the stop mode.
You can turn this feature off or change the time to 2 hours
( page 36, Off Timer).

Insert with the arrow facing in.

RQT7301

16

Recording modes and approximate

recording times

Playing while you are recording

[RAM]

Depending on the content being recorded, the recording times may

become shorter than indicated.
(Unit: hour)
DVD-RAM
DVD-R
(4.7
Mode
Single-sided
Double-sided
GB)
(4.7 GB)
(9.4 GB)
XP (High quality)

SP (Normal)

LP (Long play)

EP (Extra long play)

Picture quality

Time Slip indicator on the main unit lights.

Playing a title previously recorded while recording

Simultaneous rec and play

16 (12 )

8 (6 )

XP
SP
LP

Press [DIRECT NAVIGATOR].

Press [3, 4, 2, 1] to select a title

and press [ENTER].

EP (6H)

Time Slip indicator on the main unit lights.

EP (8H)

To exit the Direct Navigator screen

Press [DIRECT NAVIGATOR].

Recording time

Press [1] (PLAY).

8 (6 )

Playing from the beginning of the title you are

recordingChasing playback

Recording

7301en.book 17

When Recording Time in EP Mode is set to EP (6H) in the

SETUP menu.
The sound quality is better when using EP (6H) than when using
EP (8H).

[Note]
When recording to DVD-RAM using EP (8H) mode, play may not be
possible on DVD players that are compatible with DVD-RAM. In this
case use EP (6H) mode.

Reviewing the recorded images while recording

Time Slip

Time Slip indicator on the main unit lights.

PLAY
0 min

Play starts from 30

seconds previous.

FR (Flexible Recording Mode)

The unit automatically selects a recording rate between XP and EP
(8H) that will enable the recordings to fit in the available recording
time on the disc with the best possible recording quality.
You can set when programming timer recordings.
All the recording modes from XP to EP appear in the
XP
display.
SP

REC

The current recording

images
You will hear the playback audio.

LP
EP CH

Selecting audio to record

[RAM]

Press [AUDIO].
[. Stereo: Main audio (stereo)
l
If the broadcast is MonoiSAP, audio will be
v
l
monaural even if you select Stereo mode.
l
SAP:
Secondary
audio program (SAP)
l
If recorded in SAP mode, main audio is also
v
l
recorded.
l
a- Mono: Main audio (monaural)
Select Mono if reception is poor during a
stereo broadcast.
No disc

e.g., Stereo is selected

CH 12
(( Stereo

Press [TIME SLIP].

Press [3, 4] to select the time and

press [ENTER].
Press [TIME SLIP] to show the play images in full. Press
again to show the play and recording images.

To stop play
Press [].

To stop recording
2 seconds after play stops
Press [].

To stop timer recording

Press [], then [ENTER] within 5 seconds.
You can also press and hold [] on the main unit for more than 3
seconds to stop recording.

(( appears when the unit is receiving the audio type

you selected.
If you change the sound setting while recording, the recorded
sound will also change.
[DVD-R]

Select the audio (Main or SAP) in Select

MTS in the SETUP menu ( page 37).
RQT7301

17

7301en.book 18

Recording television programs

Refer to the control reference on page 16.

Flexible Recording
[RAM] [DVD-R]
The unit sets the best possible picture quality that fits the recording
within the remaining disc space.
e.g.,

45 minutes in
SP mode

[RAM] [DVD-R]
Preparation
Connect a video cassette recorder to this units input terminals.

[Note]

Remain

Recording

Recorded

Recording from a video cassette

recorder

When recording using this units input terminals, only the sound
received at the time of recording will be recorded.
As long as secondary audio that is recorded on the video cassette is
not output on the unit in play, it is not recorded.

Perfectly fit!

Recording rate
between SP and LP

e.g.: Connecting to the L2 input terminals

OPEN/CLOSE

REC
POWER
TIME SLIP

60 minutes

PULL OPEN

/x1.3

TIME SLIP

L2

S-VIDEO IN

VIDEO IN

L/MONO AUDIO IN

CH

Program to be recorded
Preparation
Select the channel to record.

S-VIDEO IN

VIDEO IN L/MONO - AUDIO IN - R

Yellow White Red

While stopped

Press [F Rec].
FLEXIBLE REC
Record in FR mode

Maximum rec time

Set recording time
Start

3 Hour 00 Min.
3 Hour 00 Min.
Cancel

Other video equipment

Press [2, 1] to select Hour and

Min. and press [3, 4] to set the
recording time.
You can also set the recording time with the numbered
buttons.

When you want to start recording

Press [3, 4, 2, 1] to select Start

and press [ENTER].

If the audio output of the other equipment is monaural, connect to L/

MONO.
The S-VIDEO terminal achieves a more vivid picture than the
VIDEO terminal.

To exit the FLEXIBLE REC window without recording

Press [RETURN].
To stop recording partway
Press [].

While stopped

Press [INPUT SELECT] to select the

input channel for the equipment you
have connected.

Recording starts.
The recording mode becomes FR mode.

To show the remaining time

Press [STATUS].

Audio/Video cable

S-Video
cable

Press [REC MODE] to select the

recording mode (XP, SP, LP or EP).
Using Flexible Recording ( left), you can save content of a
video cassette to 1 disc with the best possible quality of
recording without wasting disc space.

DVD-RAM
REC 0:59
CH71
Stereo

Remaining
time

Start play on the other equipment.

Press [ REC].
Recording starts.

To skip unwanted parts

Press [;] to pause recording. (Press again to restart recording.)
To stop recording
Press [].
Almost all videos and DVD software on sale have been
treated to prevent illegal copying. Any software that has
been so treated cannot be recorded using this unit.
RQT7301

18

7301en.book 19

Timer recording

3
DVD POWER

Press [ENTER].

TV
POWER

TIMER
RECORDING
CH

INPUT SELECT TV/VIDEO

Remaining Recording Time 1:58 SP

3/26 TUE12:53 PM

VOLUME

CHANNEL
DATE
ON
39
4 / 1 MON 4:20 PM
3

Numbered
buttons

Enter Name

3
CH

When XP is displayed in the units display, the recording

mode automatically changes to FR in order to prevent loss
of recording when there is not enough space. Change to
XP mode if you want to set the timer recording using XP
mode.
Confirm the program and make corrections if necessary
using [3, 4, 2, 1] ( page 20, step 3).
You can also press [REC MODE] to change the recording
mode.
Enter Name
Press [2, 1] to select Enter Name and press [ENTER]
( page 34).

6
AUDIO

CANCEL

9
VCR Plus+ CM SKIP

CANCEL

0
SKIP

SLOW/SEARCH

STOP

PAUSE

VCR Plusr

PLAY/x1.3

DIRECT NAVIGATOR

DIRECT
NAVIGATOR

OFF MODE
5:10 PM SP

FUNCTIONS

TOP MENU

3421
ENTER

ENTER
SUB MENU

RETURN

Recording

DVD POWER

Press [ENTER].
The settings are stored.

PROG/CHECK
ADD/DLT

PROG/CHECK DISPLAY

ADD/DLT

STATUS TIME SLIP

ERASE REC MODE

REC

OPEN/CLOSE SETUP CHAPTER

F Rec

TIMER
RECORDING

REC MODE

Remaining Recording Time 1:58 SP

3/26 TUE12:53 PM

No CHANNEL
DATE
ON
OFF MODE CHECK
01 39
4 / 1 MON 4:20 PM 5:10 PM SP OK
New Timer Program

Check to make
sure OK is
displayed.

Repeat steps 14 to program other recordings.

5
[RAM] [DVD-R]
You can enter up to 16 programs up to a month in advance.
When connecting a cable TV box or satellite receiver, the VCR
Plusi system does not work. Program the timer recording
manually and select the channel on the cable TV box or satellite
receiver before the timer recording starts.

Using VCR Plusi number to make

timer recordings
Entering VCR Plusi number is an easy way of timer recording. You
can find these codes in TV listings in newspapers and magazines.

Press [VCR Plusr].

VCR Plusi

Remaining Recording Time 1:58 SP

Press [PROG/CHECK].
The message TURN RECORDER OFF FOR TIMER
RECORDING. is shown on the television.

Press [ DVD POWER].

The unit turns off and F lights on the units display to
indicate timer recording standby has been activated.

[RAM]
Even if the unit is in timer recording standby, you can play the disc.
Without pressing [ DVD POWER], just press [1] (PLAY) or
[DIRECT NAVIGATOR]. Timer recording works even during play.

To release the unit from recording standby

Press [ DVD POWER].
The unit turns on and F goes out.
Be sure to press [ DVD POWER] to return the unit to standby
mode before the scheduled recording time. Timer recording will
work only if F is displayed.

3/26 TUE12:53 PM

To cancel recording when recording has

already begun
Enter the PLUS CODE with the numbered buttons.

No.
0

--

Press the numbered buttons to enter

the VCR Plusi number.
Press [2] to move back to correct a digit.

Press [], then [ENTER] within 5 seconds.

You can also press and hold [] on the main unit for more than
3 seconds to stop recording.

[Note]
F flashes when the unit cannot go to timer recording standby
(e.g., a recordable disc is not in the disc tray).
The actual time recorded may be longer than the program itself
when television programs are recorded using VCR Plusi.
When you program successive timer recordings to start
immediately one after the other, the unit cannot record the part
at the beginning of the later programs (a few seconds when
recording with DVD-RAM and approximately 30 seconds when
recording with DVD-R).
If you set DST (Daylight Saving Time) to ON when manually
setting the clock ( page 38), timer recording may not work
when summer switches to winter and vice versa.

RQT7301

19

7301en.book 20

Timer recording

Refer to the control reference on page 19.

You can enter up to 16 programs up to a month in advance.
(Each daily or weekly program is counted as one program.)

Recording

When connecting a cable TV box or satellite receiver, select the

channel on the cable TV box or satellite receiver before the timer
recording starts.

Manually programming timer

recordings

The unit turns off and F lights on the units display to

indicate timer recording standby has been activated.
[RAM]
Even if the unit is in timer recording standby, you can play the disc.
Without pressing [ DVD POWER], just press [1] (PLAY) or
[DIRECT NAVIGATOR]. Timer recording works even during play.

To release the unit from recording standby

Press [ DVD POWER].
The unit turns on and F goes out.
Be sure to press [ DVD POWER] to return the unit to standby
mode before the scheduled recording time. Timer recording will
work only if F is displayed.

Press [PROG/CHECK].
TIMER
RECORDING

Press [ DVD POWER].

Remaining Recording Time 1:58 SP

3/26 TUE 12:55 PM

No CHANNEL
DATE
ON
OFF MODE CHECK
01 64 ABC 3/ 26 TUE 1:00 PM 2:00 PM SP OK
New Timer Program

To cancel recording when recording has

already begun
Press [], then [ENTER] within 5 seconds.
You can also press and hold [] on the main unit for more than
3 seconds to stop recording.

CANCEL

2
3

Press ENTER or VCR Plus+ to

store new program.

[Note]

Press [3, 4] to select New Timer

Program and press [ENTER].
Press [1] to move through the items
and change the items with [3, 4].
TIMER
RECORDING
CHANNEL
64 ABC

Remaining Recording Time 1:58 SP

3/26 TUE 12:55 PM

DATE
3/ 26 TUE

ON
2:30 PM

OFF MODE
3:00 PM SP

Enter Name

Press and hold [3, 4] to alter ON (Start time) and OFF

(Finish time) in 30-minute increments.
You can also set CHANNEL, DATE, ON (Start time), and
OFF (Finish time) with the numbered buttons.
You can also press [REC MODE] to change the recording
mode.
DATE
[. Date:
l ;:
l
l Daily timer:
l ;:
a. Weekly timer:

Current date up to one month later minus

one day
SUN-SAT>MON-SAT>MON-FRI
WEEKLY SUN>--->WEEKLY SAT

Enter Name
Press [2, 1] to select Enter Name and press [ENTER]
( page 34).

Press [ENTER].
TIMER
RECORDING

Remaining Recording Time 1:58 SP

3/26 TUE12:55 PM

No CHANNEL
DATE
ON
OFF MODE CHECK
01 64 ABC 3/ 26 TUE 1:00 PM 2:00 PM SP OK
02 64 ABC 3/ 26 TUE 2:30 PM 3:00 PM SP OK
New Timer Program

Check to make
sure OK is
displayed.

CANCEL

Repeat steps 24 to program other recordings.

5
RQT7301

20

Press [PROG/CHECK].
The message TURN RECORDER OFF FOR TIMER
RECORDING. is shown on the television.

F flashes when the unit cannot go to timer recording standby

(e.g., a recordable disc is not in the disc tray).
When you program successive timer recordings to start
immediately one after the other, the unit cannot record the part
at the beginning of the later programs (a few seconds when
recording with DVD-RAM and approximately 30 seconds when
recording with DVD-R).
If you set DST (Daylight Saving Time) to ON when manually
setting the clock ( page 38), timer recording may not work
when summer switches to winter and vice versa.

7301en.book 21

Check, change or delete a program

Even when the unit is turned off, you can display the timer recording list by pressing [PROG/CHECK].

Press [PROG/CHECK].
To change a program

[ This program is currently recording.

W The times overlap those in another program. Recording of
the program with the later start time starts when the
earlier program finishes recording.
- You stopped a weekly or daily timer recording. The icon
disappears the next time the timer starts recording.
F The disc was full so the program failed to record.
The material was copy-protected so it was not recorded.
X The program did not complete recording because the disc
is dirty or some other reason.

Press [3, 4] to select the program and press [ENTER].

( page 20, step 3)

To delete a program
Press [3, 4] to select the program and press [ CANCEL] or
[ADD/DLT].

Recording

Icons

To exit the timer recording list

Press [PROG/CHECK].
The message TURN RECORDER OFF FOR TIMER
RECORDING. is shown on the television.

To put the unit on timer recording standby

TIMER
RECORDING
No CHANNEL

Remaining Recording Time 1:57 LP

Press [ DVD POWER].

The unit turns off and F lights on the units display to indicate timer
recording standby has been activated.

3/26 TUE 1:19 PM

DATE
ON
OFF
New Timer Program

MODE CHECK

Press ENTER or VCR Plus+ to

store new program.

Message displayed in the CHECK line

OK:

Displayed if the recording can fit in the

remaining space.
> (Date): For recordings made daily or weekly, the display
will show until when recordings can be made
(up to a maximum of one month from the
present time) based on the time remaining on
the disc.
! :
It may not be possible to record because:
the disc is write-protected
there is no more space left
the number of possible titles has reached its
maximum.

Programs that failed to record are displayed gray. They are automatically deleted from the timer recording list at 4 a.m. two days later.
During timer recording, you can change the end time as long as the recording mode is not FR.

RQT7301

21

7301en.book 22

Playing discs
Selecting recorded programs (titles) to play

REC

CH

TIME SLIP
X CH W
45

Playing back

CH

9
VCR Plus+ CM SKIP

SKIP

STOP

PLAY/x1.3

DIRECT NAVIGATOR

AUDIO
To exit the screen
Press [DIRECT NAVIGATOR].

CM SKIP
65

Direct Navigator screen icons

Title protected.

RETURN

RETURN

SUB MENU
PROG/CHECK DISPLAY

STATUS TIME SLIP

ERASE REC MODE

REC

OPEN/CLOSE SETUP CHAPTER

F Rec

TIME SLIP

CHAPTER

It is not possible to play continuously from one side of a double

sided disc to the other. You will need to eject the disc and turn it
over.
When using 8 cm (3) DVD-RAM, remove the disc from the
cartridge.

Press [< OPEN/CLOSE] to open the

tray and insert a disc.
Press the button again to close the tray.
Insert label-up.
Insert fully so it clicks
into place.

Insert with the arrow facing in.

Press [1] (PLAY).

DVD - R AM

PLAY
[RAM] [DVD-R]
Play starts from the most recently
recorded title.
[DVD-A] [DVD-V] [VCD] [CD]
Play starts from the beginning of the disc.

RQT7301

22

Next

Select

You can also select titles with the numbered buttons.

e.g., 5:
[0] [5]
15: [1] [5]

W X CH

Title that was not recorded due to

recording protection (Digital
broadcasts etc.)

3421
ENTER
2; ;1

ENTER

02/02

SUB MENU

FUNCTIONS

TOP MENU

ADD/DLT

--

SLOW/SEARCH

PAUSE

SUB MENU

ERASE

--

2 Press [3, 4, 2, 1] to select the title and press

[ENTER].

DIRECT NAVIGATOR
TOP MENU

8 10/27 Mon

--

VOLUME

CH

AUDIO

10 10/27 Mon

Previous

CANCEL

:9

08

Play

--

07

TV
POWER

INPUT SELECT TV/VIDEO

Numbered
buttons

Title View

/x1.3

TIME SLIP

DVD POWER

1 Press [DIRECT NAVIGATOR].

DIRECT NAVIGATOR
DVD-RAM

OPEN/CLOSE

POWER
TIME SLIP

[RAM] [DVD-R]

Title cannot be played because data is

damaged.

Currently recording.

When a menu screen appears on the television

[DVD-A] [DVD-V]
Press [3, 4, 2, 1] to select the item and press [ENTER].
Some items can also be selected using the numbered buttons.
[VCD]
Press the numbered buttons to select the item.
e.g., 5:
[0] [5]
15: [1] [5]
To return to the menu screen
[DVD-A] Press [TOP MENU].
[DVD-V] Press [TOP MENU] or [SUB MENU].
[VCD] Press [RETURN].

7301en.book 23

Operations during play

Press [].

Pause

PLAY

Press [;].
Press again to restart play.

Press [6] or [5].

Search

Skip

On the main unit, press and hold [D] or [E].

The speed increases up to 5 steps.
Press [1] (PLAY) to restart play.
Audio is heard during first level search forward.
You can turn off the sound during search ( page 37, Search Audio & PLAY k1.3).
Audio is heard during all level of search. [DVD-A] (excluding moving picture parts) [CD]

Playing back

Stop

DVD - R AM

The stopped position is memorized.

PLAY flashes in the units display. (Excluding when playing from the Direct
Navigator and when playing a play list.)
Resume play function
Press [1] (PLAY) to restart from this position.

Press [:] or [9].

On the main unit, press [D] or [E].
Each press increases the number of skips.

Press the numbered buttons.

e.g., 5:
15:

Starting from a
selected item

[0] [5]
[1] [5]

[CD] (MP3 discs only) 5:

15:

[0] [0] [5]

[0] [1] [5]

[DVD-A] Selecting groups

While stopped (screen saver is displayed on the television right)
5:
[5]
This works only when stopped (screen saver is displayed on the television right) with some
discs.

Quick View

Press and hold [1] (PLAY/a1.3).

[RAM]
The play speed can be increased
without distorting the audio.

Press again to return to normal speed.

This does not work if the setting is Off in Search Audio & PLAY k1.3 ( page 37).

While paused, press [6] or [5].

Slow-motion
[RAM] [DVD-R] [DVD-A] (Motion
picture parts only) [DVD-V] [VCD]

Frame-by-frame
[RAM] [DVD-R] [DVD-A] (Motion
picture parts only) [DVD-V] [VCD]

On the main unit, press and hold [D] or [E].

The speed increases up to 5 steps.
Press [1] (PLAY) to restart play.
Forward direction only. [VCD]
The unit will pause if slow-motion play is continued for 5 minutes.

While paused, press [2;] or [;1].

Each press shows the next frame.
Press [1] (PLAY) to restart play.
Forward direction only. [VCD]

Press [TIME SLIP].

Play images

Displaying the
television image as a
picture-in-picture

The unit displays the television image as a

picture-in-picture.
You will hear the playback audio.
Press [TIME SLIP] again to cancel.
The blue background does not appear on the
receiving screen even if you select On from
the Blue Background in the SETUP menu
( page 37).

Skipping the specified

time (Time Slip)

1 Press [TIME SLIP].

2 Press [3, 4] to select the time and press [ENTER].

Current receiving images

You can change the channel being received by
pressing [W X CH].
You cannot change the channel being received
while recording.

[RAM] [DVD-R]

Play skips the specified time.

Press [TIME SLIP] to show the play images in full.

CM Skip

Press [CM SKIP].

[RAM] [DVD-R]
Play restarts from approximately a
minute later.
RQT7301

23

7301en.book 24

Playing discs

Refer to the control reference on page 22.

Editing operations during play

1 Press [ERASE].
2 Press [2, 1] to select Erase and press [ENTER].

Erase
[RAM] [DVD-R]

A title cannot be restored once it is erased. Make certain before proceeding.

You cannot erase when recording and playing at the same time.

Create chapters

Press [CHAPTER].

Playing back

[RAM]

Press [:, 9] to skip to the start of a chapter.

You cannot divide when recording and playing at the same time.

Changing audio during play

Press [AUDIO].
[RAM] [VCD]
LR>L>R
^---------------}

DVD-RAM
PLAY

e.g., L R is selected

LR

When playing a SAP broadcast recorded DVD-RAM:

MAIN()SAP

[DVD-A] [DVD-V]
You can change the audio channel number each time you press the
button. This allows you to change things like the soundtrack
language.
Sound track

1 ENG

Digital 3/2.1ch

e.g., [DVD-V] English is the selected language ( page 26, Sound

track).

RQT7301

24

7301en.book 25

Using menus to play MP3

Using the tree screen to find a group
While the file list is displayed

TV
POWER

INPUT SELECT TV/VIDEO

Numbered
buttons

VOLUME

CH

Selected group no. /Total group no.

If the group has no track, is displayed
as group number.

CH
AUDIO

MENU
G
8
T
14
TOTAL
40/111

9
VCR Plus+ CM SKIP

CANCEL

0
SKIP

STOP

SLOW/SEARCH

PAUSE

No.
0 9

PLAY/x1.3

DIRECT NAVIGATOR

FUNCTIONS

TOP MENU
TOP MENU

3421
ENTER

ENTER
SUB MENU

RETURN

PROG/CHECK DISPLAY

ADD/DLT

RETURN

ERASE REC MODE

REC

OPEN/CLOSE SETUP CHAPTER

F Rec

Press [TOP MENU].

Selected group
MENU
G
1
T
1
TOTAL
1/111

No.
0 9

No.
GROUP
1 : My favorite
TOTAL
TRACK
TREE
001 Both Ends Freezing
1
002 Lady Starfish
2
003 Life on Jupiter
3
004 Metal Glue
4
005 Paint It Yellow
5
006 Pyjamamama
6
007 Shrimps from Mars
7
008 Starperson
8
009 Velvet Cuppermine
9
010 Ziggy Starfish
10

Prev.

G 7/25

001 My favorite
001 Brazilian pops
002 Chinese pops
003 Czech pops
004 Hungarian pops
005 Liner notes
006 Japanese pops
007 Mexican pops
008 Philippine pops
009 Swedish pops
001 Momoko
002 Standard number
001 Piano solo
002 Vocal

You cannot select groups

that contain no compatible
files.

Press [3, 4, 2, 1] to select a group

and press [ENTER].
The file list for the group appears.

To return to the file list

Press [RETURN].

This unit plays MP3 files recorded on CD-R/RW designed for audio
recording that are finalized ( page 40) on a computer. Files are
treated as tracks and folders are treated as groups.

G: Group no.
T: Track no. in the group
TOTAL: Track no./Total track
no. in all groups

TREE
MP3 music

STATUS TIME SLIP

[CD] (MP3 discs only)

Press [1] while a track is highlighted

to display the tree screen.

Playing back

DVD POWER

Next

Press [3, 4] to select the track and

press [ENTER].

Tips for making MP3 discs

Discs must conform to ISO9660 level 1 or 2 (except for
extended formats).
Compatible compression rate: between 32 kbps and 320 kbps
Compatible sampling rate:
16 kHz, 22.05 kHz, 24 kHz, 32 kHz, 44.1 kHz and 48 kHz
Maximum number of tracks and groups recognizable:
999 tracks and 99 groups
This unit is compatible with multi-session.
This unit is not compatible with ID3 tags or packet writing.
Depending on recording, some items may not be playable.
Reading or play of the disc may take time if there are a lot of still
pictures or sessions.
The display order may differ from how the order is displayed on
a computer.
Naming folders and files
MP3 files must have the
extension .MP3 or .mp3.
At the time of recording, give
folder and file names a 3-digit
numeric prefix in the order you
want them to play (this may not
work at times).
English alphabets and Arabic
numerals are displayed
correctly. Other characters may
not be displayed correctly.

e.g.,
Root
001

001 (folder=group)
001track.mp3 (file=track)
002track.mp3
003track.mp3
002 group

003 group

001track.mp3
002track.mp3
003track.mp3
004track.mp3

001track.mp3
002track.mp3
003track.mp3

Order of play

Play continues to the last track in the last group.

0 indicates the track currently playing.
You can also select the track with the numbered buttons.
e.g., 5: [0] [0] [5]
15: [0] [1] [5]
To show other pages
Press [3, 4, 2, 1] to select Prev. or Next and press [ENTER].
After listing all the tracks in one group, the list for the next group
appears.
To exit the screen
Press [TOP MENU].

RQT7301

25

7301en.book 26

Using on-screen menus

Disc menuSetting disc content
DVD POWER

TV
POWER
VOLUME

CH

INPUT SELECT TV/VIDEO

Sound track
[RAM] [DVD-R]
The discs audio attributes appear.
[DVD-A] [DVD-V]
Select the audio and language (Audio attribute, Language
below).

CH
AUDIO

9
VCR Plus+ CM SKIP

CANCEL

Subtitle
[RAM] [DVD-R] (Only discs that contain subtitle on/off information)
[DVD-A] [DVD-V]

Playing back

SKIP

STOP

SLOW/SEARCH

PAUSE

PLAY/x1.3

DIRECT NAVIGATOR

Turn the subtitle on/off and select the language.

Subtitle on/off information cannot be recorded using this
unit. [RAM] [DVD-R]
If the subtitles overlap closed captions recorded on discs,
turn the subtitles off.

FUNCTIONS

TOP MENU

3421
ENTER

ENTER
SUB MENU

Audio channel [RAM] [VCD]

RETURN

page 24, Changing audio during play

DISPLAY
PROG/CHECK DISPLAY

STATUS TIME SLIP

Angle [DVD-A] [DVD-V]

ADD/DLT

ERASE REC MODE

REC

OPEN/CLOSE SETUP CHAPTER

F Rec

STILL-P (Still picture) [DVD-A]

Selects the play method for still pictures.
Slide Show:Plays according to the default order on the disc.
Page:
Select the still picture number and play.
RANDOM: Plays in random order.
Return:
Returns to the default still picture on the disc.
PBC (Playback control page 40) [VCD]

Common procedures

Indicates whether menu play (playback control) is on or off.

Press [DISPLAY].
Disc
Play
Video
Audio

Menu

Sound track

Digital 2/0 ch

Subtitle

OFF

Audio channel

LR

Item

Setting

Depending on the condition of the unit (playing, stopped,

etc.) and disc contents, there are some items that you
cannot select or change.

Press [3, 4] to select the menu and

press [1].

Press [3, 4] to select the item and

press [1].
Press [3, 4] to select the setting.

Some items can be changed by pressing [ENTER].

To clear the on-screen menus
Press [DISPLAY].

RQT7301

26

You may have to use the menus ( page 22) on the disc to
change.
The display changes according to the disc content. You cannot
change when there is no recording.
Audio attribute
LPCM/PPCM/Digital/DTS/MPEG:

Signal type

k (kHz):

Sampling frequency

b (bit):

Number of bits

ch (channel):

Number of channels

Language
ENG:
FRA:
DEU:
ITA:
ESP:
NLD:

English
French
German
Italian
Spanish
Dutch

SVE:
NOR:
DAN:
POR:
RUS:
JPN:

Swedish
Norwegian
Danish
Portuguese
Russian
Japanese

CHI:
KOR:
MAL:
VIE:
THA:
:

Chinese
Korean
Malay
Vietnamese
Thai
Others

7301en.book 27

Play menuChange play sequence

This function works only when the elapsed play time is displayed.

All
[VCD] [CD] (excluding MP3 discs)
Chapter
[RAM] [DVD-R] [DVD-V]
Group
[DVD-A] [CD] (MP3 discs only)
PL (Play list) [RAM]
Title
[RAM] [DVD-R] [DVD-V]
Track
[DVD-A] [VCD] [CD]
Select OFF to cancel.

Video menuChange picture quality

Playing back

Repeat play

Picture
Normal:
Soft:
Fine:
Cinema:

Default setting
Soft picture with fewer video artifacts
Details are sharper
Mellows movies, enhances detail in dark scenes.

MPEG-DNR
Reduces noise and picture degradation.
Progressive ( page 40)
Select ON to enable progressive output.
Select OFF if the picture is stretched horizontally.
When progressive output is on, closed captions cannot be
displayed.
Transfer (When Progressive is set to ON.)
Select the method of conversion for progressive output to suit
the type of material being played ( page 40, Film and
video).
Auto1 (normal):
Detects 24 frame-per-second film content and
appropriately converts it.
Auto2: Compatible with 30 frame-per-second film content
in addition to 24 frame-per-second film content.
Video: Select when using Auto1 and Auto2, and the
video content is distorted.

Only when you have selected 480P in TV Type ( page 14).

Audio menuChange sound effect

V.S.S. [RAM] [DVD-R] [DVD-V]
(Only with Dolby Digital with 2 or more channels)
Enjoy a surround-like effect if you are using two front
speakers only.
Turn V.S.S. off if it caused distortion.
V.S.S. does not work for SAP recordings.
Dialog Enhancer [DVD-A] [DVD-V]
(Dolby Digital, 3-channel or over only, including a center channel)
The volume of the center channel is raised to make dialog
easier to hear.

RQT7301

27

7301en.book 28

Editing titles/chapters

DVD POWER

Editing titles/chapters and playing

chapters

TV
POWER

INPUT SELECT TV/VIDEO

Preparation
Release protection (cartridge page 15, disc page 33). [RAM]

VOLUME

CH

1
2

CH

Press [DIRECT NAVIGATOR].

Press [3, 4, 2, 1] to select the title.

AUDIO

DIRECT NAVIGATOR
DVD-RAM

VCR Plus+ CM SKIP

CANCEL

0
SKIP

:9

STOP

Title View

07

08

10 10/27 Mon

8 10/27 Mon

--

--

--

SLOW/SEARCH

PAUSE

PLAY/x1.3

--

1
;

Editing

DIRECT
NAVIGATOR

DIRECT NAVIGATOR

FUNCTIONS

3421
ENTER

ENTER

SUB MENU

02/02

Previous
Play

TOP MENU

SUB MENU

RETURN

PROG/CHECK DISPLAY

ADD/DLT

REC

OPEN/CLOSE SETUP CHAPTER

F Rec

Next

Select

To show other pages

Press [3, 4, 2, 1] to select Previous or Next and
press [ENTER].
You can also press [:, 9] to show other pages.
Multiple editing
Select with [3, 4, 2, 1] and press [;]. (Repeat.)
A check mark appears. Press [;] again to cancel.

RETURN

STATUS TIME SLIP

ERASE REC MODE

SUB MENU

Press [SUB MENU], then [3, 4] to

select the operation and press [ENTER].
If you select Edit, press [3, 4] to select the operation and
press [ENTER].
Enter Name

[RAM] [DVD-R]

Set up Protection
Cancel Protection

Erase

Title/Chapter
Programs are recorded as a single title consisting of one chapter.
Title

Start

End

Change Thumbnail

Chapter View

Chapter

Press [3, 4, 2, 1] to select the

chapter.
To start play Press [ENTER].
To edit Step 5.

You can divide a title into multiple chapters. [RAM]

( page 24, Create chapters, page 29, Divide Chapter)
Title
Chapter

Shorten

Edit

If you select Chapter View

Chapter

Chapter

Properties

Refer to Title
operations.

DIRECT NAVIGATOR
DVD-RAM

Chapter View

08 8 10/27 Mon

Chapter
001

---

---

---

---

---

---

---

---

---

---

---

You can change the order of chapters and create a play list. [RAM]
Previous

Titles are divided into about 5-minute chapters after finalizing

( page 33). [DVD-R]
The maximum number of items on a disc:
Titles:
99
Chapters:
Approximately 1000
(Depends on disc contents.)

Play

SUB MENU

Once erased or shortened, it cannot be restored to its original

state. Make certain before proceeding.
You cannot edit during recording.

Next

Select

To show other pages/Multiple editing ( above)

Press [SUB MENU], then [3, 4] to

select the operation and press [ENTER].
Erase Chapter
Divide Chapter

[Note]

01/01

Combine Chapters

Refer to Chapter
operations.

Title View

You can go back to the Title View.

To exit the screen
Press [DIRECT NAVIGATOR].

RQT7301

28

To return to the previous screen

Press [RETURN].

7301en.book 29

Title operations
Erase
[RAM] [DVD-R]

Press [2, 1] to select Erase and press [ENTER].

The available recording time on DVD-R does not increase when you erase titles.
Information (e.g., time and date) is shown.

Properties

Properties

Dinosaur
No. 01
Start
10:00 AM
Date 6/20/2002 Wed Rec time 2:15 (SP)
CH 4

[RAM] [DVD-R]

Enter Name

page 34, Entering text

[RAM] [DVD-R]
If set, this will protect the title from accidental erasure.

[RAM]

DIRECT NAVIGATOR
DVD-RAM

Press [2, 1] to select Yes and press

[ENTER].
The lock symbol appears when the title is protected.
You can remove unnecessary part of the recording such as
commercials.

DIRECT NAVIGATOR
DVD-RAM

Shorten
[RAM]

07

08

10 10/27 Mon

8 10/27 Mo

--

--

Shorten

08

Title V

Editing

Set up Protection
Cancel Protection

PLAY

Start
End

Press [ENTER] at the start point

and end point of the section you
want to erase.
Press [3, 4] to select Exit and
press [ENTER].

Next
Exit
0:43.21
Start

End

- -:- -.- -

- -:- -.- -

Select Next and press [ENTER] to erase other sections.

Press [2, 1] to select Erase and press [ENTER].

You can change the image to be shown as a thumbnail

picture in the Title View.

Change Thumbnail

1
2

[RAM] [DVD-R]

Press [1] (PLAY) to start play.

DIRECT NAVIGATOR
DVD-RAM

Change Thumbnail

08
Change

Press [ENTER] when the image

you want to use as a thumbnail is
shown.
Press [3, 4] to select Exit and
press [ENTER].

Exit
0:00.01
Change
00:00.01

Multiple editing is possible.

Chapter operations
Erase Chapter

Press [2, 1] to select Erase and press [ENTER].

[RAM]

1
Divide Chapter
[RAM]

Press [ENTER] at the point you

want to divide.

DIRECT NAVIGATOR
DVD-RAM
08

Divide Chapter
PLAY

Repeat this step to divide at other points.

Press [3, 4] to select Exit

and press [ENTER].

Combine Chapters

Press [2, 1] to select Combine and press [ENTER].

[RAM]

The selected chapter and next chapter are combined.

Divide
Exit
0:43.21

Multiple editing is possible.

For quicker editing
Use search, Time Slip or slow-motion ( page 23) to find the
desired point.
Press [:, 9] to skip to the end of a title.

RQT7301

29

7301en.book 30

Creating, editing and playing play lists

2
DVD POWER

TV
POWER

INPUT SELECT TV/VIDEO

VOLUME

CH

Press [3, 4, 2, 1] to select PLAY

LIST and press [ENTER].
PLAY LIST
DVD-RAM

Play List View

--

--

CH

--

--

--

Create

--

AUDIO

01/01

Previous

VCR Plus+ CM SKIP

CANCEL

Next

0
SKIP

STOP

SLOW/SEARCH

PAUSE

PLAY/x1.3

DIRECT NAVIGATOR

FUNCTIONS

Editing

FUNCTIONS
TOP MENU

3421
ENTER

ENTER
SUB MENU

SUB MENU

RETURN

PROG/CHECK DISPLAY

Press [3, 4, 2, 1] to select Create

and press [ENTER].
Press [2, 1] to select the source title
and press [4].
Press [ENTER] to select all the chapters in the title, then
skip to step 6.

RETURN

PLAY LIST
DVD-RAM

STATUS TIME SLIP

Create

08 8 10/27 Mon
Source Title

ADD/DLT

ERASE REC MODE

REC

OPEN/CLOSE SETUP CHAPTER

F Rec

01

01/01

02

Source Chapter
002
001

---

---

003

---

001/001

Chapters in PLAY LIST

5
[RAM]

001/001

Press [2, 1] to select the chapter you

want to add to a play list and press
[ENTER].
Press [3] to cancel.
PLAY LIST
DVD-RAM

You can arrange the chapters ( page 28) to create a play list.
Title
Title
Chapter

Chapter Chapter

Play list Chapter

Chapter

01/01
---

---

Source Chapter
002
001

003

---

Chapters in PLAY LIST

-----

---

---

01

Chapter

02

001/001

001/001

You can also create a new chapter from the source title.
Press [SUB MENU] to select Divide Chapter and press
[ENTER] ( page 29, Divide Chapter).

Chapter

Editing play lists doesnt modify the recorded data.

Play lists are not recorded separately so this doesnt use much
capacity.

Create

08 8 10/27 Mon
Source Title

Press [2, 1] to select the position to

insert the chapter and press [ENTER].
PLAY LIST
DVD-RAM

The maximum number of items on a disc:

Play lists:
99
Chapters in play lists: Approximately 1000
(Depends on disc contents.)

Create

08 8 10/27 Mon
Source Title

01/01
---

---

Source Chapter
002
001

003

---

Chapters in PLAY LIST

-----

---

---

01

02

001/001

001/001

Creating play lists

Press RETURN to exit.

Preparation
Release protection (cartridge page 15, disc page 33).

Repeat steps 56 to add other chapters.

Press [3] to select other source titles.

While stopped

Press [RETURN].

Press [FUNCTIONS].
DVD
DVD-RAM

DISC PROTECTION OFF

CARTRIDGE PROTECTION OFF

Play back DIRECT NAVIGATOR

Record
Dubbing
/ Edit

Set up

RQT7301

30

TIMER RECORDING
FLEXIBLE RECORDING

PLAY LIST

SETUP

DISC SETTING

To exit the screen

Press [RETURN] several times.
To return to the previous screen
Press [RETURN].

7301en.book 31

Editing and playing play lists/chapters

2
3

While stopped

Erase

Press [FUNCTIONS].
Press [3, 4, 2, 1] to select PLAY
LIST and press [ENTER].
Press [3, 4, 2, 1] to select the play list.

Press [2, 1] to select Erase and

press [ENTER].
Play list information (e.g., time and date) is
shown.
Properties

Properties

Dinosaur
No.
Chapters

To start play Press [ENTER].

To edit Step 4.
PLAY LIST
DVD-RAM

--

--

10/27 Mon 0:30

Create

--

--

Create

page 30, Creating play lists

Copy

Press [2, 1] to select Copy and press

[ENTER].

Enter
Name

page 34, Entering text

Change
Thumbnail

page 29, Change Thumbnail

--

01/01

Previous
SUB MENU

Next

Select

To show other pages/Multiple editing ( page 28)

Press [SUB MENU], then [3, 4] to

select the operation and press
[ENTER].

If you select Edit, press [3, 4] to select the operation and

press [ENTER].
Create
Copy
Enter Name

Erase

Refer to Play list

operations.

Multiple editing is possible.

Chapter operations
Editing chapters in a play list does not modify the source titles and
source chapters.

Change Thumbnail

Properties

Add
Chapter

Edit
Chapter View

Press [3, 4, 2, 1] to select the

chapter.

PLAY LIST
DVD-RAM

Move
Chapter

To start play Press [ENTER].

To edit Step 6.
PLAY LIST
DVD-RAM

page 30, Creating play lists, Step 46

Press [3, 4, 2, 1] to select the

position to insert the chapter and press
[ENTER].

If you select Chapter View

Date 6/20/2002 Wed

Time 0:30.05

Play List View

01

Play

01
012

Editing

Play list operations

Move Chapter

08 10/27 Mon 0:30

001

002

---

---

---

---

---

---

---

---

---

---

Chapter View

08 10/27 Mon 0:30

001

002

---

---

---

---

---

---

---

---

---

---

Previous
Play

SUB MENU

01/01

Previous

Next

Select

To show other pages/Multiple editing ( page 28)

Press [SUB MENU], then [3, 4] to

select the operation and press
[ENTER].

01/01

Next

Divide
Chapter

page 29, Divide Chapter

Combine
Chapters

page 29, Combine Chapters

Erase
Chapter

page 29, Erase Chapter

Add Chapter

Move Chapter
Divide Chapter

Refer to Chapter operations.

Multiple editing is possible.

Combine Chapters
Erase Chapter
Play List View

You can go back to the Play List View.

To exit the screen
Press [RETURN] several times.
To return to the previous screen
Press [RETURN].

RQT7301

31

7301en.book 32

Disc setting

DVD POWER

[RAM] [DVD-R]
TV
POWER

INPUT SELECT TV/VIDEO

Preparation
Release protection. [RAM]
(cartridge page 15, disc right)

VOLUME

CH

CH

Press [FUNCTIONS].

AUDIO

9
VCR Plus+ CM SKIP

CANCEL

DVD

DVD-RAM

SKIP

STOP

While stopped

SLOW/SEARCH

PAUSE

Record

PLAY/x1.3

Dubbing
/ Edit
DIRECT NAVIGATOR

DISC PROTECTION OFF

CARTRIDGE PROTECTION OFF

Play back DIRECT NAVIGATOR

FUNCTIONS

Set up

TIMER RECORDING

FLEXIBLE RECORDING

PLAY LIST

SETUP

DISC SETTING

FUNCTIONS
TOP MENU

3421
ENTER

ENTER

Convenient functions

SUB MENU

RETURN

PROG/CHECK DISPLAY

ADD/DLT

RETURN

STATUS TIME SLIP

ERASE REC MODE

REC

OPEN/CLOSE SETUP CHAPTER

F Rec

Press [3, 4, 2, 1] to select DISC

SETTING and press [ENTER].
DISC SETTING Titles 11
DVD-RAM

Used

Free 5:38 (EP)

0 : 22

Disc Name
Disc Protection

Off

Format disc

Press [3, 4] to select the operation

and press [ENTER].

To exit the screen

Press [RETURN] several times.
To return to the previous screen
Press [RETURN].

[Note]
Once the disc has been formatted, the contents cannot be
restored. Check carefully before proceeding. The contents on
the disc are erased when you format it even if you have set title
or disc protection.
After finalizing [DVD-R],
The disc becomes play-only and you can no longer record or
edit.
There is a pause of several seconds between titles.
Titles are divided into about 5-minute chapters.

This time varies greatly depending on the condition and

mode of recording.

RQT7301

32

7301en.book 33

Disc Name

Select First play

[RAM] [DVD-R]
page 34, Entering text
The disc name is displayed in the FUNCTIONS window.

DVD
DVD-RAM

DOCUMENTARY
DISC PROTECTION OF
CARTRIDGE PROTECTION OF

[DVD-R]
Select whether to show the top menu after finalizing the disc.
Do this before finalizing the disc.

Press [3, 4] to select Top Menu or

Title 1 and press [ENTER].

Play back DIRECT NAVIGATOR

Top Menu: The top menu appears first.

Title 1:
The disc content is played without displaying the top
menu.

[RAM]
If set, this will protect the disc from accidental erasure.

Press [2, 1] to set disc protection and

press [ENTER].
DISC SETTING Titles 11
DVD-RAM

Used

Free 5:38 (EP)

0 : 22

Finalize
( page 40, Finalize)
[DVD-R]
You can play DVD-R on compatible DVD players by finalizing them
on this unit, effectively making them into DVD-Video that complies
with DVD-Video standards.

Press [2, 1] to select Yes and

press [ENTER].

Press [2, 1] to select Start and

press [ENTER].

Disc Name
Disc Protection

On

Format disc

A message appears when finalizing is finished.

The lock symbol appears closed when the disc is write-protected.

Format disc
( page 40, Formatting)
[RAM]
Some DVD-RAM are unformatted. Format them before using them in
this unit. Formatting also allows you to erase the entire contents of a
disc.

1
2

Press [2, 1] to select Yes and

press [ENTER].
Press [2, 1] to select Start and
press [ENTER].

Convenient functions

Disc Protection

Press [ENTER].

Do not disconnect the AC power supply cord while the

message Finalizing the disc is on the television. This will
render the disc unusable.
Finalizing takes up to 15 minutes.
You cannot finalize DVD-R recorded on other manufacturers
equipment.
Before
finalize

After
finalize

DVD-R

DVD-V

Recording/Editing/Entering name

Play on other players

Disc display on this unit

DVD-R finalized on this unit may not be playable on other players

due to the condition of the recording.

A message appears when formatting is finished.

Press [ENTER].

Visit Panasonics homepage for more information about DVDs.

For U.S.A.:
http://www.panasonic.com/playDVD-R
For Canada: www.panasonic.ca

To stop formatting
Press [RETURN].
You can cancel formatting if it takes more than 2 minutes. The disc
must be reformatted if you do this.
Do not disconnect the AC power supply cord while the
message Formatting .. is on the television. This can render
the disc unusable.
Formatting normally takes a few minutes, however it may take up to
a maximum of 70 minutes.
Formatting cannot be performed on DVD-R or CD-R/RW.

RQT7301

33

7301en.book 34

Entering text

1
DVD POWER

INPUT SELECT TV/VIDEO

Numbered
buttons

Title (timer recording)

Select Enter Name in step 3 on page 19, 20.

VOLUME

CH

Title
Select Enter Name in step 3 on page 28.
Play list
Select Enter Name in step 4 on page 31.

CH
AUDIO

CANCEL

Disc
Select Disc Name in step 3 on page 32.

VCR Plus+ CM SKIP

CANCEL

0
SKIP

STOP

Show Enter Name screen.

TV
POWER

SLOW/SEARCH

PAUSE

Name field: shows the text you have entered

PLAY/x1.3

DIRECT NAVIGATOR

Enter Name
_

FUNCTIONS

1 1

2 A

i j

3 D
4 G

l %

; ERASE

5 J

O N @

6 M N

k
m n

7 P
8 T

)
-

9 W X
0 . ,

"

'

y
:

z
;

\
`

|
^

TOP MENU

3421
ENTER

ENTER

Convenient functions

SUB MENU

RETURN

PROG/CHECK DISPLAY

ADD/DLT

RETURN

SET
0

STATUS TIME SLIP

ERASE REC MODE

REC

OPEN/CLOSE SETUP CHAPTER

F Rec

&

SPACE

Press [3, 4, 2, 1] to select a

character and press [ENTER].
Repeat this step to enter other characters.
To erase a character
Press [3, 4, 2, 1] to select the character in the name field
and press [;].

[RAM] [DVD-R]
You can give names to recorded titles, etc.

Using the numbered buttons to enter characters

e.g., entering the letter R
1Press [7] to move to the 7th row.
2Press [7] twice to highlight R.
3Press [ENTER].
5 J K

The maximum number of characters:

[RAM]

Characters

Title

64 (44)

Play list

64

Disc

64

To enter a space
Press [ CANCEL] and press
[ENTER].

Timer recording

[DVD-R]

Characters

Title

44

Disc

40

If a name is long, parts of it may not be shown in some screens.

RQT7301

34

Press [] (SET).

6 M N
7 P
8 T

Returns to the previously displayed screen.

To end partway
Press [RETURN].
Text is not saved.

L
O

7301en.book 35

FUNCTIONS window and Status messages

Status messages
DVD POWER

Status messages appear on the television when you operate the unit
to show the condition of the unit.

TV
POWER
VOLUME

CH

INPUT SELECT TV/VIDEO

Press [STATUS].
The display changes each time you press the button.
1

CH
AUDIO

9
VCR Plus+ CM SKIP

CANCEL

STOP

SLOW/SEARCH

PAUSE

PLAY/x1.3

DIRECT NAVIGATOR

Recording mode

FUNCTIONS

FUNCTIONS
3421
ENTER

ENTER
SUB MENU

RETURN

STATUS TIME SLIP

ERASE REC MODE

REC

OPEN/CLOSE SETUP CHAPTER

F Rec

Remain
6/8 10:15 PM
T2 0:05.14 XP
T1 0:00.10 SP

0:50 XP

Play position

STATUS
PROG/CHECK DISPLAY

Available recording time

and recording mode

Date and time

TOP MENU

ADD/DLT

Recording or play status/input

channel
Audio type

Elapsed play time

Elapsed recording time
No display

Convenient functions

SKIP

Disc indication

DVD-RAM
REC
PLAY
LR

FUNCTIONS window
By using the FUNCTIONS window you may access the main
functions quickly and easily.

While stopped

Press [FUNCTIONS].
DVD
DVD-RAM

DISC PROTECTION OFF

CARTRIDGE PROTECTION OFF

Play back DIRECT NAVIGATOR

Record
Dubbing
/ Edit

Set up

TIMER RECORDING
FLEXIBLE RECORDING

PLAY LIST

SETUP

DISC SETTING

Functions displayed depend on the type of disc.

Press [3, 4, 2, 1] to select an item

and press [ENTER].

To exit the FUNCTIONS window

Press [FUNCTIONS].

RQT7301

35

7301en.book 36

Changing the units settings

Summary of settings
See page 38 for details on menu operation.
The settings remain intact even if you switch the unit to standby.

Tabs
Channel

Set Up

Menus

Options (Underlined items are the factory presets.)

Antenna System ( page 11)

TV

Auto Channel Setting ( page 11)

CATV

Preset Channel Captions ( page 13)

Manual Channel Captions ( page 13)

VCR Plusr CH Setting ( page 12)

Off Timer
Select how long the unit remains on when it is not being used.

2 hr

Remote Control Code ( page 14)

Set Code 1

6 hr

Off

Set Code 2

Set Code 3

Auto Clock Setting ( page 38)

Convenient functions

Manual Clock Setting ( page 38)

Disc

Video

Time Zone Adjust ( page 38)

j1

Re-initialize Settings
This returns all values in the SETUP menus, except for the
clock, channel settings, ratings level, and on-screen language,
to the default settings.

Yes

No

Languages
Choose the language for audio, subtitle and disc menus. [DVD-V] Enter a code ( page 40) when you select Other .
Press [ENTER] to display the menu.
Some discs start in a certain language despite any changes
you make here.
Audio Language

French
Spanish
English
Original: The original language of each disc will be selected.
Other

Subtitle Language

Automatic:
If the language selected for Audio Language is not available,
subtitles of that language will automatically appear if available
on that disc.
English
French
Spanish Other

Menu Language

English

French

Ratings
Set a ratings level to limit DVD-Video play.

8 No Limit:
1 to 7:

Follow the on-screen instructions. Enter a 4-digit password with

the numbered buttons when the password screen is shown.
Do not forget your password.

0 Lock All:

All DVD-Video can be played.

Prohibits play of DVD-Video with corresponding
ratings recorded on them.
Prohibits play of all DVD-Video.

Recording Time in EP Mode

Select the maximum number of hours for recording in EP mode
( page 17, Recording modes and approximate recording
times).

EP (6H): You can record for 6 hours on an unused 4.7 GB

disc.
EP (8H): You can record for 8 hours on an unused 4.7 GB
disc.

Play DVD-Audio in Video Mode

Select Video (On) to play DVD-Video content on some DVDAudio.

Video (On):The setting returns to Audio (Off) when you

change the disc or turn the unit off.
Audio (Off)

3-D Y/C Separation

On:

Unlock Recorder
Change Level

Off:

36

Spanish

Other

Change Password
Temporary Unlock

Reduces noise by separating the luminance (Y) and

color (C) signals when recording.
Reduces the ghosting that occurs when recording fast
moving images.

Hybrid VBR Resolution

( page 40, VBR)

Automatic: The resolution is automated to provide efficient

recording with less block noise. [RAM]
The resolution is fixed to ensure that there is no
Fixed:
loss of source picture resolution while recording.

Still Mode
Select the type of picture shown when you pause play
( page 40, Frames and fields).

Automatic
Field: Select if jittering occurs when Automatic is selected.
Frame: Select if small text or fine patterns cannot be seen
clearly when Automatic is selected.

Line-in NR
Reduces video tape noise while dubbing.
When noise reduction is on, 3-D Y/C Separation ( above)
does not work regardless of the setting.

Automatic: Noise reduction only works on input picture from a

video tape.
On:
Noise reduction works for any input video.
Off:
Noise reduction is off. Select when you want to
record input as is.

Continued on next page

RQT7301

i1

7301en.book 37

Tabs

Continued

Audio

Options (Underlined items are the factory presets.)

Input Level
Adjusts the black level of the input signal.

Lighter

Darker

Output Level (Composite/S Video)

Adjusts the black level of the output signal from the VIDEO OUT
and S-VIDEO OUT terminal.

Lighter

Darker

Output Level (Component)

Adjusts the black level of the output signal from the
COMPONENT VIDEO OUT (Y/PB/PR) terminals.

Lighter

Normal

Search Audio & PLAY k1.3

You may hear sound regardless of this setting with some discs.

On:
Off:

D. Range Compression [DVD-V] (Dolby Digital only)

Change the dynamic range for late night viewing.

On

Off

Select MTS
Select whether to record the main or secondary audio type (SAP)
when recording to DVD-R. (You cannot change secondary audio when
recording audio to DVD-R from an external source.)

Main

SAP

Darker

Audio is heard during first level search forward.

Audio is not heard during search. Quick View
( page 23) does not work.

Digital Audio Output

Change the settings when you have connected equipment through this units DIGITAL AUDIO OUT terminal ( page 9).
Press [ENTER] to display the menu.
PCM Down Conversion
Select how to output audio with a sampling frequency of 96 kHz
or 88.2 kHz.
Signals are converted to 48 kHz or 44.1 kHz despite the above
settings if the signals have a sampling frequency of over 96 kHz
or 88.2 kHz, or the disc has copy protection.

On:

Dolby Digital

Bitstream: When connecting to equipment displaying

the Dolby Digital logo.
PCM:
When connecting to equipment not
displaying the Dolby Digital logo.

DTS

Display

TV
Screen

Select how to output the signal, to output

Bitstream so the connected equipment
decodes the signal, or to decode on this unit
and output the signal as PCM (2 channel).

[Note]
Not making the proper settings may result in
noise, possibly damage your hearing and
speakers, and digital recording may not
work properly.

Off:

Signals are converted to 48 kHz or 44.1 kHz.

(Choose when the connected equipment cannot
process signals with sampling frequency of 96
kHz or 88.2 kHz.)
Signals are output as 96 kHz or 88.2 kHz.
(Choose when the connected equipment can
process signals with sampling frequency of 96
kHz or 88.2 kHz.)

Convenient functions

Video

Menus

Black Level Control

Select normal, lighter or darker for adjusting the black level control to the desired setting for picture enhancement.

Bitstream: When connecting to equipment displaying

the DTS logo.
When connecting to equipment not
PCM:
displaying the DTS logo.

Status Messages
Choose whether to show status messages automatically.

Automatic

Off

On-screen Language
Choose the language for these menus and the on-screen messages.

English

Espaol

Blue Background
Select Off if you do not want to have the unit show the blue
background when reception is weak.

On

Front Display
Changes the brightness of the units display.

Bright
Dim
Automatic:
The display turns dark during play, and reappears
momentarily if a button is pressed. When the unit is
turned off all displays disappear. While using this mode
the standby power consumption can be reduced.

TV Type ( page 14)

Aspect 4:3 & 480I

Aspect 16:9 & 480I

4:3 TV Settings for DVD-Video

Select how DVD-Video widescreen picture is shown on a 4:3 standard
aspect television.

Pan & Scan:

Video recorded for a widescreen is played as Pan &
Scan (unless prohibited by the producer of the disc).
Letterbox:
Video recorded for a widescreen is played in the
letterbox style.

4:3 TV Settings for DVD-RAM

Select how DVD-RAM widescreen picture is shown on a 4:3 standard
aspect television.

4:3:
Titles played as recorded.
Pan & Scan: Video recorded for a widescreen is played as
Pan & Scan.
Letterbox: Video recorded for a widescreen is played
in the letterbox style.

Franais

Off

Aspect 4:3 & 480P

Aspect 16:9 & 480P

RQT7301

37

7301en.book 38

Changing the units settings

Numbered
buttons

If the time was not set correctly, use manual clock setting or time
zone adjust.
DST, Daylight Saving Time, shows the summertime setting.
TIME ZONE shows the time difference from Greenwich meantime
(GMT).
EST (Eastern Standard Time)
l GMT j5
CST (Central Standard Time)
l GMT j6
MST (Mountain Standard Time) l GMT j7
PST (Pacific Standard Time)
l GMT j8
AST (Alaska Standard Time)
l GMT j9
HST (Hawaii Standard Time)
l GMT j10
For other areas: xx hr

CH
AUDIO

9
VCR Plus+ CM SKIP

CANCEL

0
SKIP

STOP

SLOW/SEARCH

PAUSE

PLAY/x1.3

DIRECT NAVIGATOR

FUNCTIONS

Press [ENTER].

TOP MENU

3421
ENTER

ENTER
SUB MENU

RETURN

To cancel partway
Press [RETURN].

RETURN

Time Zone Adjust

PROG/CHECK DISPLAY

Convenient functions

ADD/DLT

SETUP

STATUS TIME SLIP

ERASE REC MODE

REC

OPEN/CLOSE SETUP CHAPTER

F Rec

Adjust the time zone (j1 or i1) if it was not set correctly with auto
clock setting.
You cannot change this setting if you set the clock manually.

Common procedures

j1

While stopped

Tabs

Menus

Channel
Set Up

Antenna System

Options

CATV

Auto Channel Setting

Channel Captions
Preset Channel Captions
M
l Ch
l C ti

Press [3, 4] to select the tab and

press [1].
Press [3, 4] to select the menu and
press [ENTER].
Press [3, 4] to select the option and
press [ENTER].
Clock settings

1
2

Auto Clock Setting

Auto Clock Setting is complete.

RQT7301

38

Channel
Set Up
Disc
Video
Audio

4/4/2002 12:15 AM
DST............. ON
TIME ZONE.... CST

Manual Clock Setting

MONTH

Press [3, 4] to select Set Up and

press [1].

SETUP

Press [3, 4] to select Manual Clock

Setting and press [ENTER].

Channel
Set Up
Disc
Video

Press [SETUP].

Auto setting starts. This can take some time, up to a few hours
in some cases. The following screen appears when setting is
complete.

Press [3, 4] to select s1 or r1

and press [ENTER].

SETUP

Press [3, 4] to select Auto Clock

Setting and press [ENTER].
Press [ENTER].

i1

Manual Clock Setting

DAY
/

YEAR
/

2000 SAT

HOUR

MINUTE

12 : 00 PM

DST

TIME ZONE

OFF

EST

Press [2, 1] to select the item you

want to change and press [3, 4] to
change the setting.
DST (Daylight Saving Time): ON or OFF
If you select ON, the clock is advanced one hour starting at
2 a.m. on the first Sunday in April and ending at 2 a.m. on
the last Sunday in October.
TIME ZONE ( above)

Auto Clock Setting

Channel
Set Up
Disc
Video

SETUP

Time Zone Adjust

SETUP

Press [SETUP].

Press [3, 4] to select Time Zone

Adjust and press [ENTER].

Press [ENTER].

The clock starts.

When you change the time zone, the recording times for titles
recorded before the time zone was changed also change to
correspond to the new time zone.
To exit the screen
Press [SETUP].
To return to the previous screen
Press [RETURN].

7301en.book 39

Specifications
DVD Video Recording format (DVD-RAM),
DVD-Video format (DVD-R)
Optical pick-up:
System with 1 lens, 2 integration units
(658 nm wavelength for DVDs,
795 nm wavelength for CDs)
Recordable discs:
12 cm (5q) 4.7 GB DVD-RAM discs
12 cm (5q) 9.4 GB DVD-RAM discs
8 cm (3q) 2.8 GB DVD-RAM discs
12 cm (5q) 4.7 GB DVD-R discs (for General Ver. 2.0)
8 cm (3q) 1.4 GB DVD-R discs (for General Ver. 2.0)
12 cm (5z) 4.7 GB DVD-R discs
(for General Ver. 2.0/4kSPEED DVD-R Revision 1.0)
Recording time:
Max. 8 hours (using 4.7 GB disc)
XP: 60 minutes
SP: 120 minutes
LP: 240 minutes
EP: 360 minutes or 480 minutes
Discs played:
12 cm (5q) 4.7 GB DVD-RAM discs
12 cm (5q) 9.4 GB DVD-RAM discs
8 cm (3q) 2.8 GB DVD-RAM discs
12 cm (5q) 4.7 GB DVD-R discs (for General Ver. 2.0)
8 cm (3q) 1.4 GB DVD-R discs (for General Ver. 2.0)
12 cm (5z) 4.7 GB DVD-R discs
(for General Ver. 2.0/4kSPEED DVD-R Revision 1.0)
DVD-VIDEO discs
DVD-Audio discs
CD-Audio discs (CD-DA)
Video CD discs
CD-R/CD-RW discs (CD-DA, Video CD, MP3 formatted discs)
Video system
TV system:
NTSC system, 525 lines, 60 fields
Recording system:
MPEG2 (Hybrid VBR)
Input:
LINE (pin jack)a3,
1.0 Vp-p; 75
S connectora3
Y: 1.0 Vp-p; 75
C: 0.286 Vp-p; 75
Output:
LINE (pin jack)a1,
1.0 Vp-p; 75
S connectora1
Y: 1.0 Vp-p; 75
C: 0.286 Vp-p; 75
Component video output (480P/480i):
Y: 1.0 Vp-p; 75
PB: 0.7 Vp-p; 75
PR: 0.7 Vp-p; 75
Antenna reception input:TV Channel:
2ch69ch, 75
CATV Channel:
1ch125ch, 75

Audio system
Recording system:
Input:

Output:

Number of channels:

Dolby Digital
LINE (pin jack)a3
Reference input: 309 mVrms
FS: 2 Vrms (1 kHz, 0 dB)
Input impedance: 47 k
LINE (pin jack)a1
Reference output: 309 mVrms
FS: 2 Vrms (1 kHz, 0 dB)
Output impedance: 1 k
(Load impedance: 10 k)
Recording:
2 channels
Playback:
2 channels

Other input/output connectors:

Digital audio optical output connector
Operating temperature range:
5 oC40 oC (41 oF104 oF)
Operating humidity range:
10 %80 % RH (no condensation)
Clock unit:
Quartz-controlled 12-hour digital display
LASER Specification
Class I LASER Product
Wave length:
795 nm 658 nm
Laser power:
No hazardous radiation is emitted with the safety protection
Power supply
[For\U.S.A.\and\Canada]
AC 120 V, 60 Hz
[For\units\with\PX\printed\on\the\outer\packaging]
AC 110 240 V, 50/60 Hz
Power consumption:
25 W
Dimensions:
Approx. 430 (W)k79 (H)k274 (D) mm
[Approx.1615/16q(W)k31/8q(H)k1013/16q(D)]
(excluding protrusions)
Mass:
Approx. 3.3 kg (7.28 lbs)

Power consumption in standby mode:

Reference

Recording system:

approx. 2.9 W

[Note]
Specifications are subject to change without notice.
Mass and dimensions are approximate.

Maintenance
The precision parts in this unit are readily affected by the
environment, especially temperature, humidity, and dust.
Cigarette smoke also can cause malfunction or breakdown.
To clean this unit, wipe with a soft, dry cloth.
Never use alcohol, paint thinner or benzine to clean this unit.
Before using chemically treated cloth, read the instructions that
came with the cloth carefully.

Observe the following points to ensure continued listening and

viewing pleasure.
Dust and dirt may adhere to the units lens over time, making it
impossible to record or play discs.
Use the DVD-RAM/PD lens cleaner (LF-K123LCA1) about once
every year, depending on frequency of use and the operating
environment. Read the lens cleaners instructions carefully before
use.

RQT7301

39

7301en.book 40

Glossary
Bitstream
This is the digital form of multi-channel audio data (e.g., 5.1 channel)
before it is decoded into its various channels.
CPRM (Content Protection for Recordable Media)
CPRM is technology used to protect broadcasts that are allowed to
be recorded only once. Such broadcasts can be recorded only with
CPRM compatible recorders and discs.
Down-mixing
This is the process of remixing the multi-channel audio found on
some discs into two channels for stereo output. It is useful when you
want to listen to the 5.1-channel audio recorded on DVDs through
your televisions speakers. Some discs prohibit down-mixing and this
unit can then only output the front two channels.

Reference

Dynamic range
Dynamic range is the difference between the lowest level of sound
that can be heard above the noise of the equipment and the highest
level of sound before distortion occurs. Dynamic range compression
means reducing the gap between the loudest and softest sounds.
This means you can listen at low volumes but still hear dialog clearly.
Film and video
DVD-Video are recorded using either film or video. This unit can
determine which type has been used, then uses the most suitable
method of progressive output.
Film is 24 or 30 frames per second, with motion picture film
generally being 24 frames per second.
Video is 60 fields per second (two fields making up one frame).
Finalize
A process that makes play of a recorded CD-R, CD-RW or DVD-R
etc. possible on equipment that can play such media. You can
finalize DVD-R on this unit.
You cannot record onto or edit finalized discs.
Formatting
Formatting is the process of making media such as DVD-RAM
recordable on recording equipment.
You can format DVD-RAM on this unit.
Formatting erases irrevocably all recordings on the disc.
Frames and fields
Frames refer to the single images that constitute the video you see
on your television. Each frame consists of two fields.

MP3 (MPEG Audio Layer 3)

An audio compression method that compresses audio to
approximately one tenth of its size without any considerable loss of
audio quality. You can play MP3 you have recorded onto CD-R and
CD-RW.
Pan&Scan/Letterbox
In general, DVD-Video are produced with the intention that they be
viewed on a widescreen television (16:9 aspect ratio), so images
often dont fit regular (4:3 aspect ratio) televisions. Two styles of
picture, Pan & Scan and Letterbox, deal with this problem.
Pan&Scan: The sides are cut off so the picture
fills the screen.
Letterbox: Black bands appear at the top and
bottom of the picture so the picture
itself appears in an aspect ratio of
16:9.
Playback control (PBC)
If a Video CD has playback control, you can select scenes and
information with menus.
(This unit is compatible with version 2.0 and 1.1.)
Progressive/Interlace
NTSC, the video signal standard, has 480 interlaced (I) scan lines,
whereas progressive scanning uses twice the number of scan lines.
This is called 480P.
Using progressive output, you can enjoy the high-resolution video
recorded on media such as DVD-Video.
Your television must be compatible to enjoy progressive video.
Protection
You can prevent accidental erasure by setting writing protection or
erasure protection.
Sampling frequency
Sampling is the process of converting the heights of sound wave
(analog signal) samples taken at set periods into digits (digital
encoding). Sampling frequency is the number of samples taken per
second, so larger numbers mean more faithful reproduction of the
original sound.
VBR (Variable bitrate)
This is a method of video recording that adjusts the bit rate
according to video signal.

Frame
Field
Field
A frame still shows two fields, so there may be some blurring, but
picture quality is generally better.
A field still shows less picture information so it may be rougher, but
there is no blurring.

Language code list

RQT7301

40

Abkhazian:
6566
Afar:
6565
Afrikaans:
6570
Albanian:
8381
Ameharic:
6577
Arabic:
6582
Armenian:
7289
Assamese:
6583
Aymara:
6588
Azerbaijani:
6590
Bashkir:
6665
Basque:
6985
Bengali; Bangla:
6678
Bhutani:
6890
Bihari:
6672
Breton:
6682
Bulgarian:
6671
Burmese:
7789
Byelorussian: 6669
Cambodian:
7577

Enter the code with the numbered buttons.

Catalan:
Chinese:
Corsican:
Croatian:
Czech:
Danish:
Dutch:
English:
Esperanto:
Estonian:
Faroese:
Fiji:
Finnish:
French:
Frisian:
Galician:
Georgian:
German:
Greek:
Greenlandic:
Guarani:

6765
9072
6779
7282
6783
6865
7876
6978
6979
6984
7079
7074
7073
7082
7089
7176
7565
6869
6976
7576
7178

Gujarati:
7185
Hausa:
7265
Hebrew:
7387
Hindi:
7273
Hungarian:
7285
Icelandic:
7383
Indonesian:
7378
Interlingua:
7365
Irish:
7165
Italian:
7384
Japanese:
7465
Javanese:
7487
Kannada:
7578
Kashmiri:
7583
Kazakh:
7575
Kirghiz:
7589
Korean:
7579
Kurdish:
7585
Laotian:
7679
Latin:
7665
Latvian, Lettish:7686

Lingala:
7678
Lithuanian:
7684
Macedonian: 7775
Malagasy:
7771
Malay:
7783
Malayalam:
7776
Maltese:
7784
Maori:
7773
Marathi:
7782
Moldavian:
7779
Mongolian:
7778
Nauru:
7865
Nepali:
7869
Norwegian:
7879
Oriya:
7982
Pashto, Pushto:8083
Persian:
7065
Polish:
8076
Portuguese:
8084
Punjabi:
8065
Quechua:
8185

Rhaeto-Romance:
8277
Romanian:
8279
Russian:
8285
Samoan:
8377
Sanskrit:
8365
Scots Gaelic: 7168
Serbian:
8382
Serbo-Croatian:8372
Shona:
8378
Sindhi:
8368
Singhalese:
8373
Slovak:
8375
Slovenian:
8376
Somali:
8379
Spanish:
6983
Sundanese:
8385
Swahili:
8387
Swedish:
8386
Tagalog:
8476
Tajik:
8471

Tamil:
Tatar:
Telugu:
Thai:
Tibetan:
Tigrinya:
Tonga:
Turkish:
Turkmen:
Twi:
Ukrainian:
Urdu:
Uzbek:
Vietnamese:
Volapk:
Welsh:
Wolof:
Xhosa:
Yiddish:
Yoruba:
Zulu:

8465
8484
8469
8472
6679
8473
8479
8482
8475
8487
8575
8582
8590
8673
8679
6789
8779
8872
7473
8979
9085

7301en.book 41

Frequently asked questions

Set up
What equipment is necessary to play multi
channel surround sound?

Page
DVD-Video:
You can play DVD-Video multi channel surround by digitally connecting an
amplifier equipped with a Dolby Digital and a DTS decoder.
DVD-Audio:
This unit plays DVD-Audio in 2 channels. You cannot play multi channel
surround sound.

Are the headphones and speakers directly

connected to the unit?

You cannot directly connect to the unit. Connect through the amplifier etc.

The television has both S-VIDEO IN

terminal and COMPONENT VIDEO IN
terminals. Which terminal should I connect
with?

We recommend the COMPONENT VIDEO IN terminal. Component signal

outputs the color difference signals (PB/PR) and luminance signal (Y)
separately in order to achieve high fidelity in reproducing colors.
If the television is compatible with progressive output, a high quality picture
can be output because this units component video output terminal outputs
a progressive output signal.

Is my television progressive output

compatible?

All Panasonic televisions that have 480P input terminals are compatible.
Consult the manufacturer if you have another brand of television.

Can I play DVD-Video, DVD-Audio and

Video CDs bought in another country?

You can play them if the video standard is NTSC.

However, you cannot play DVD-Video if their region number does not
include 1 or All.

Can a DVD-Video that does not have a

region number be played?

The DVD-Video region number indicates the disc conforms to a standard.

You cannot play discs that do not have a region number.

Please tell me about DVD-R and DVD-RW

compatibility with this unit.

This unit records and plays DVD-R. However, you cannot record onto DVDR discs that are finalized.
This unit also records and plays 1k4k recording speed DVD-R discs.
This unit does not record or play DVD-RW.

Please tell me about CD-R and CD-RW

compatibility with this unit.

You can play CD-R and CD-RW on this unit that are created using a
compatible format.
You cannot write to a CD-R or CD-RW with this unit.

Reference

Disc

15, 25

Recording
Can I record from a commercially
purchased video cassette or DVD?

Most commercially sold video cassettes and DVD are copy protected;
therefore, recording is usually not possible.

Can a DVD-R recorded on this unit be

played on other equipment?

You can play on DVD-R compatible players after finalizing the disc on this
unit; however, due to the condition of the recording, play may not be
possible.

33

How many times can I write to a DVD-RAM

disc?

You can write to the disc approximately 100,000 times depending upon the
conditions of use.

Can I record digital audio signals using this

unit?

You cannot record digital signals. The digital audio terminals on this unit are
for output only.

Can a digital audio signal from this unit be

recorded to other equipment?

You can record if using the PCM signal. When recording DVD, change the
Digital Audio Output settings to the following from the SETUP menu.
PCM Down Conversion
On
Dolby Digital
PCM
DTS
PCM
However, only
As long as digital recording from the disc is permitted.
As long as the recording equipment is compatible with a sampling
frequency of 48 kHz.
You cannot record MP3 signals.

37

With DVD-RAM, you can, and the audio recorded also changes. Just press
[AUDIO].
With DVD-R, you cannot. Change before recording with the Select MTS in
the SETUP menu.

17

Can I switch to MTS during recording?

37

RQT7301

41

7301en.book 42

Error messages
On the television

Page

Cannot finish recording

completely.

The program was copy-protected.

The disc may be full.

Cannot play.

You inserted an incompatible disc (Discs recorded in PAL video etc.).

Cannot record on the disc.

The disc may be dirty or scratched.

15

Unable to format.
Please check the disc.
Cannot record. Disc is full.
Cannot record. Maximum
number of titles exceeded.

Create space by erasing any unnecessary titles. [RAM]

Use a new disc. [RAM] [DVD-R]

24, 29, 33

Error has occurred. Please

press ENTER.

Press [ENTER] to start recovery process. You cannot operate the unit while it is recovering
(SELF CHECK appears on the units display).

No disc

The disc may be upside down.

Please change the disc.

There may be a problem with the disc. Press [< OPEN/CLOSE] to remove it and check it
for scratches or dirt. (The unit turns off automatically after you open the tray.)

15

This is a non-recordable disc.

The unit cannot record on the disc you inserted. Insert a DVD-RAM or unfinalized DVD-R.
You inserted an unformatted DVD-RAM. Format the disc with this unit.

33

The operation is prohibited by the unit or disc.

CHK REMOTE
( stands for a number.)

The remote control and main unit are using different codes. Change the code on the
remote control.
Press and hold [ENTER] and the indicated number button at
the same time for more than 2 seconds.

14

HARD ERR

If there is no change after turning the unit on and off, consult the dealer where the unit was
purchased.

NO READ

The disc is dirty or badly scratched. The unit cannot record, play, or edit.
You have used a DVD-RAM/PD lens cleaner and it has finished. Press [< OPEN/CLOSE]
to eject the disc.

15

PROG FULL

There are already 16 timer programs. Delete unnecessary timer programs.

21

SELF CHECK

There was a power failure or the AC plug was disconnected while the unit was on. The unit
is carrying out its recovery process. Wait until the message disappears.

This disc is not formatted

properly.

Reference

On the units display

RQT7301

42

UNSUPPORT

You have inserted a disc the unit cannot play or record on.

15

U14

The unit is hot.

The unit switches to standby for safety reasons. Wait for about 30 minutes until the
message disappears.
Select a position with good ventilation when installing the unit. Do not block the cooling fan
on the rear of the unit.

U99

The unit fails to operate properly. Press [POWER /I] on the main unit to switch the unit to
standby. Now press [POWER /I] on the main unit again to turn the unit on.

7301en.book 43

Troubleshooting guide
Before requesting service, make the following checks. If you are in doubt about some of the check points, or if the remedies indicated in the chart
do not solve the problem, refer to the Customer Services Directory on page 46 if you reside in the U.S.A., or refer to the Product information on
page 45 if you reside in Canada. In other areas, consult your dealer.

The following do not indicate a problem with this unit:

Regular disc rotating sounds. The sound of the disc rotating may
become louder especially when finalizing a DVD-R.
Poor reception due to atmospheric conditions.

Image disturbance during search.

Interruptions to reception due to periodic satellite broadcasting
breaks.

Power

Page

No power.

Insert the AC power supply cord securely into a known active AC outlet.

The unit switches to the

standby mode.

This is a power saving feature. Change Off Timer in the SETUP menu, if you would prefer.
One of the units safety devices is activated. Press [POWER /I] on the main unit to turn the
unit on.

36

The display is dim.

Change Front Display in the SETUP menu.

37

12:00 is flashing on the

units display.

Set the clock.

38

Compared to the actual

recorded time, the remaining
time displayed is less.

The displayed recording/play time is converted from the number of frames at 29.97 frames
(equal to 0.999 seconds) to one second. There will be slight a difference between the time
displayed and the actual elapsed time (e.g., actual one-hour elapsed time may display as
approximately 59 minutes 56 seconds). This does not affect the recording.

The time recorded on the disc

and the available time shown
do not add up.
The play time shown for MP3
does not agree with the actual
time.

Times shown may disagree with actual times.

Even if you erase recorded content from the DVD-R, there is no increase in disc space.
More disc space than the actual recording time is used after recording or editing the DVD-R
200 times or more.
While searching, the elapsed time may not display correctly.

Television reception worsens

after connecting the unit.

This can occur because the signals are being divided between the unit and other
equipment. It can be solved by using a signal booster, available from audio-visual suppliers.

Status messages do not

appear.

Select Automatic in Status Messages in the SETUP menu.

37

The blue background does not

appear.

Select On in Blue Background in the SETUP menu.

37

The 4:3 aspect ratio picture

expands left and right.

Use the television to change the aspect. If your television does not have that function, set
Progressive in the Video menu to OFF.
Check the settings for TV Type, 4:3 TV Settings for DVD-Video or 4:3 TV Settings for
DVD-RAM in the SETUP menu.

27

There is a lot of after-image

when playing video.

Set MPEG-DNR in the Video menu to OFF.

27

When playing DVD-Video

using progressive output, one
part of the picture
momentarily appears to be
doubled up.

Set Progressive in the Video menu to OFF. This problem is caused by the editing method
or material used on DVD-Video, but should be corrected if you use interlace output.

27

There is no apparent change

in picture quality when
adjusted with the Video menu
in the on-screen menus.

The effect is less perceivable with some types of video.

The images from this unit do

not appear on the television.

Make sure that the television is connected to the VIDEO OUT terminal, S-VIDEO OUT
terminal or COMPONENT VIDEO OUT terminals on this unit.
Make sure that the televisions input setting (e.g., VIDEO 1) is correct.
The television isnt compatible with progressive signals. Press and hold [] and [TIME SLIP]
on the main unit at the same time for about 5 seconds. The setting will change to interlace.

Reference

Displays

TV screen and video

Screen size is wrong.

Picture is distorted.

37

RQT7301

43

7301en.book 44

Troubleshooting guide

Sound
No sound.
Low volume.
Distorted sound.
Cannot hear the desired
audio type.

Cannot switch audio.

Page
Check the connections and settings. Check the input mode on the amplifier if you have
connected one.
Press [AUDIO] to select the audio.
Turn off V.S.S. in the following cases.
When using discs that do not have surround sound effects such as Karaoke discs.
When playing MTS broadcast programs.
The disc may have a restriction on the method of audio output. If D.MIX does not appear in
the display when playing multi-channel DVD-Audio, only audio for the two front channels will
be output. Refer to the discs jacket.

79, 37

You cannot change the audio type when a DVD-R is in the disc tray.
You cannot change the audio type when playing a DVD-R. (You can select Main or SAP
in Select MTS in the SETUP menu before recording.)
You have used digital connection. Set Dolby Digital to PCM or connect using audio
cables (analog connection).
There are discs which audio cannot be changed because of how the disc was created.

37

17, 24
27

37, 9

Operation
Change manufacturer code. Some televisions cannot be operated even if you change the
code.
The remote control and main unit are using different codes. Change the code on the remote
control.
Press and hold [ENTER] and the indicated number button
at the same time for more than 2 seconds.

14

The batteries are depleted. Replace them with new ones.

Colored glass may obstruct the signal reception/transmission.
Dont place the signal sensor in direct sunlight or in areas that may be subject to sunlight
exposure.

The unit is on but cannot be

operated.

Some operations may be prohibited by the disc.

The unit is hot (U14 appears on the display). Wait for U14 to disappear.
One of the units safety devices may have been activated.
Reset the unit as follows:
Press [POWER /I] on the main unit to switch the unit to standby.
If the unit doesnt switch to standby, press and hold [POWER /I] on the main unit for about
10 seconds. The unit is forcibly switched to standby.
Alternatively, disconnect the AC power supply cord, wait one minute, then reconnect it.

Cannot eject disc.

The unit may have a problem. While the unit is off, press and hold [] and [CH W] on the
main unit at the same time for about 5 seconds. Remove the disc and consult the dealer.

You havent inserted a disc or the disc you inserted cannot be recorded on. Insert a disc the
unit can record onto.
The disc is unformatted. Format the disc. [RAM]
The write-protect tab on the cartridge is set to PROTECT, or the disc is protected with DISC
SETTING.
Some programs have limitations on the number of times they can be recorded (CPRM).
The disc is full or nearly full. Erase unneeded titles or use another disc.
You cannot record on finalized DVD-R discs.
Due to peculiarities of DVD-R, you may be unable to record onto them if you either insert
and remove the disc or switch the unit on and off while a disc is loaded, a total of fifty times.
A DVD-R recorded on this unit may not be recordable on other Panasonic DVD recorders.

15

Reference

Cannot operate the

television.
The remote control doesnt
work.

14

Recording and timer recording

Cannot record.

Timer recording does not

work properly.
VCR Plusr system does
not work properly.

RQT7301

44

When connecting a cable TV box or satellite receiver, the VCR Plusi system does not
work.
The timer program is incorrect or different timer program times overlap. Correct the
program.
The unit is not on timer recording standby. (F on the units display is not on.) Press
[ DVD POWER] to turn the unit off and make sure that F is on.
Correct the guide channels.
Set the clock.

33
15, 33
40
24, 29, 33

21
19, 20
12
38

Timer recording does not

stop even when [] is
pressed.

Press [] and then [ENTER] within 5 seconds to turn F off. Recording stops.

The timer program remains

even after recording
finishes.

The timer program remains if set to daily or weekly.

20

A part or whole of a
recorded title has been lost.

If there is a power failure or the plug is disconnected from the household AC outlet while
recording or editing, the title may be lost or the disc may become unusable.
You will have to format the disc ([RAM]) or use a new disc. We cannot offer any guarantee
regarding lost programs or discs.

33

19, 20

7301en.book 45

Page

Play fails to start even when

[1] (PLAY) is pressed.
Play starts but then stops
immediately.

Insert the disc correctly with the label facing up.

You tried to play a blank DVD-RAM/DVD-R, or discs unplayable on this unit.
When recording to DVD-RAM using EP (8H) mode, play may not be possible on DVD
players that are compatible with DVD-RAM. In this case use EP (6H) mode.

22
15
36

DVD-Video is not played.

Some DVD-Video cannot be played when you change the ratings level.

36

Alternative soundtrack and

subtitles cannot be selected.

The languages are not recorded on the disc.

You may have to use the discs menus to select languages.

No subtitles.

When progressive output is on, closed captions cannot be displayed.

Subtitles are not recorded on the disc.
Turn the subtitles on.

26

Angle cannot be changed.

Angles can only be changed during scenes where different angles are recorded.

You have forgotten your

ratings password.

While the disc tray is open, press and hold [D] and [E] on the main unit at the
same time for 5 or more seconds.

Quick View does not work.

This does not work if the setting is Off in Search Audio & PLAY k1.3.
This does not work when audio is other than Dolby Digital.
This does not work when recording is in XP or FR mode.

37

The resume play function

does not work.

This function only works when PLAY is flashing in the unit display.
Memorized positions are canceled when the unit is turned off or when the tray is opened. The
memorized position on the play list is also canceled when the play list and title are edited.

Cannot format.

The disc is dirty. Use a special cleaner and wipe clean.

You tried formatting a disc that is not compatible with this unit.

15
15

Cannot create chapters.

The unit writes the chapter division information to the disc when you turn it off or remove the
disc. The information is not written if there is an interruption to the power before this.
These operations are not possible with still pictures.
You cannot set points if they are too close to each other. You cannot set an end point before
a start point.

Cannot erase chapters.

When the chapter is too short to erase, use Combine Chapters to make the chapter longer.

29

The available recording time

doesnt increase even after
erasing recordings on the disc.

Available recording space on the DVD-R does not increase even after erasing previously
recorded titles.

Cannot create a play list.

You cannot select all the chapters at once in a title if the title also includes still pictures.
Select them individually.

Edit

Cannot mark the start point or

the end point during
Shorten operation.

Reference

Play

Product Service
1. Damage requiring serviceThe unit should be serviced by qualified service personnel if:
(a) The AC power supply cord or AC adaptor has been damaged; or
(b) Objects or liquids have gotten into the unit; or
(c) The unit has been exposed to rain; or
(d) The unit does not operate normally or exhibits a marked change in performance; or
(e) The unit has been dropped or the cabinet damaged.
2. ServicingDo not attempt to service the unit beyond that described in these operating instructions. Refer all other servicing to authorized
servicing personnel.
3. Replacement partsWhen parts need replacing ensure the servicer uses parts specified by the manufacturer or parts that have the same
characteristics as the original parts. Unauthorized substitutes may result in fire, electric shock, or other hazards.
4. Safety checkAfter repairs or service, ask the servicer to perform safety checks to confirm that the unit is in proper working condition.

Product information
For product information or assistance with product operation:
In the U.S.A., refer to Customer Services Directory on page 46.
In Canada, contact the Panasonic Canada Inc. Customer Care Centre at 1-800-561-5505, or visit the website (www.panasonic.ca), or an
authorized Servicentre closest to you.
User memo:
The model number and serial number of this product can be
found on either the back or the bottom of the unit.
Please note them in the space provided below and keep for
future reference.
MODEL NUMBER
SERIAL NUMBER

DMR-E55

DATE OF PURCHASE _______________________________

DEALER NAME ____________________________________
DEALER ADDRESS _________________________________
__________________________________________________
TELEPHONE NUMBER ______________________________

RQT7301

45

7301en.book 46

Limited Warranty (ONLY FOR U.S.A.)

Panasonic Consumer Electronics Company,
Division of Matsushita Electric Corporation of America
One Panasonic Way Secaucus, New Jersey 07094

Panasonic Sales Company, Division of Matsushita Electric

of Puerto Rico, Inc.,
Ave. 65 de Infantera, Km. 9.5
San Gabriel Industrial Park, Carolina, Puerto Rico 00985

Panasonic DVD Recorder

Limited Warranty
Limited Warranty Coverage
If your product does not work properly because of a defect in materials or workmanship,
Panasonic Consumer Electronics Company or Panasonic Sales Company (collectively
referred to as the warrantor) will, for the length of the period indicated on the chart below,
which starts with the date of original purchase (warranty period), at its option either (a)
repair your product with new or refurbished parts, or (b) replace it with a new or a refurbished
product. The decision to repair or replace will be made by the warrantor.
Product or Part Name

Reference

Parts

Labor

DVD Recorder

One (1) Year

One (1) Year

Rechargeable Batteries,
DVD-RAM Disc (in
exchange for defective
item)

Ten (10) Days

Not Applicable

During the Labor warranty period there will be no charge for labor. During the Parts
warranty period, there will be no charge for parts. You must carry-in or mail-in your product
during the warranty period. If non-rechargeable batteries are included, they are not
warranted. This warranty only applies to products purchased and serviced in the United
States or Puerto Rico. This warranty is extended only to the original purchaser of a new
product which was not sold as is. A purchase receipt or other proof of the original purchase
date is required for warranty service.
Carry-In or Mail-In Service
For Carry-In or Mail-In Service in the United States call 1-800-211-PANA (7262) or visit
Panasonic Web Site: http://www.panasonic.com
For assistance in Puerto Rico call Panasonic Sales Company (787)-750-4300 or fax
(787)-768-2910.

Limited Warranty Limits And Exclusions

This warranty ONLY COVERS failures due to defects in materials or workmanship, and DOES
NOT COVER normal wear and tear or cosmetic damage. The warranty ALSO DOES NOT
COVER damages which occurred in shipment, or failures which are caused by products not
supplied by the warrantor, or failures which result from accidents, misuse, abuse, neglect,
mishandling, misapplication, alteration, faulty installation, set-up adjustments, misadjustment
of consumer controls, improper maintenance, power line surge, lightning damage,
modification, or commercial use (such as in a hotel, office, restaurant, or other business),
rental use of the product, service by anyone other than a Factory Servicenter or other
Authorized Servicer, or damage that is attributable to acts of God.

THERE ARE NO EXPRESS WARRANTIES EXCEPT AS LISTED UNDER

LIMITED WARRANTY COVERAGE. THE WARRANTOR IS NOT LIABLE
FOR INCIDENTAL OR CONSEQUENTIAL DAMAGES RESULTING FROM
THE USE OF THIS PRODUCT, OR ARISING OUT OF ANY BREACH OF THIS
WARRANTY. (As examples, this excludes damages for lost time, travel to and
from the servicer, loss of media or images, data or other recorded content. The
items listed are not exclusive, but are for illustration only.) ALL EXPRESS AND
IMPLIED WARRANTIES, INCLUDING THE WARRANTY OF
MERCHANTABILITY, ARE LIMITED TO THE PERIOD OF THE LIMITED
WARRANTY.
Some states do not allow the exclusion or limitation of incidental or
consequential damages, or limitations on how long an implied warranty lasts, so
the exclusions may not apply to you.
This warranty gives you specific legal rights and you may also have other rights
which vary from state to state. If a problem with this product develops during or
after the warranty period, you may contact your dealer or Servicenter. If the
problem is not handled to your satisfaction, then write to the warrantors
Consumer Affairs Department at the addresses listed for the warrantor.
PARTS AND SERVICE WHICH ARE NOT COVERED BY THIS LIMITED
WARRANTY ARE YOUR RESPONSIBILITY.

Customer Services Directory

Obtain Product Information and Operating Assistance; locate your nearest Dealer or Servicenter; purchase Parts and
Accessories; or make Customer Service and Literature requests by visiting our Web Site at:

http://www.panasonic.com/support
or, contact us via the web at:

http://www.panasonic.com/contactinfo
You may also contact us directly at:
1-800-211-PANA (7262),
Monday-Friday 9 am-9 pm; Saturday-Sunday 10 am-7 pm, EST.

For hearing or speech impaired TTY users, TTY : 1-877-833-8855

Accessory Purchases
Purchase Parts, Accessories and Instruction Books online for all Panasonic Products by visiting our Web Site at:

http://www.pasc.panasonic.com
or, send your request by E-mail to:

npcparts@panasonic.com
You may also contact us directly at:
1-800-332-5368 (Phone) 1-800-237-9080 (Fax Only) (Monday Friday 9 am to 8 pm, EST.)
Panasonic Services Company
20421 84th Avenue South, Kent, WA 98032
(We Accept Visa, MasterCard, Discover Card, American Express, and Personal Checks)

For hearing or speech impaired TTY users, TTY : 1-866-605-1277

Service in Puerto Rico

Matsushita Electric of Puerto Rico, Inc. Panasonic Sales Company
Factory Servicenter:
Ave. 65 de Infantera, Km. 9.5, San Gabriel Industrial Park, Carolina, Puerto Rico 00985
Phone (787)750-4300, Fax (787)768-2910
F1003

RQT7301

46

7301en.book 47

Limited Warranty (ONLY FOR CANADA)

Panasonic Canada Inc.
5770 Ambler Drive, Mississauga, Ontario L4W 2T3

PANASONIC/TECHNICS PRODUCTLIMITED WARRANTY

Panasonic Canada Inc. warrants this product to be free from defects in material and workmanship and agrees to remedy any such defect for a
period as stated below from the date of original purchase.
Panasonic DVD Recorder One (1) year, parts and labour
LIMITATIONS AND EXCLUSIONS
This warranty does not apply to products purchased outside Canada or to any product which has been improperly installed, subjected to usage
for which the product was not designed, misused or abused, damaged during shipping, or which has been altered or repaired in any way that
affects the reliability or detracts from the performance, nor does it cover any product which is used commercially. Dry cell batteries are also
excluded from coverage under this warranty.
This warranty is extended to the original end user purchaser only. A purchase receipt or other proof of date of original purchase is required before
warranty service is performed.
THIS EXPRESS, LIMITED WARRANTY IS IN LIEU OF ALL OTHER WARRANTIES, EXPRESS OR IMPLIED, EXCLUDING ANY IMPLIED
WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE.
IN NO EVENT WILL PANASONIC CANADA INC. BE LIABLE FOR ANY SPECIAL, INDIRECT OR CONSEQUENTIAL DAMAGES.
In certain instances, some jurisdictions do not allow the exclusion or limitation of incidental or consequential damages, or the exclusion of implied
warranties, so the above limitations and exclusions may not be applicable.

Reference

WARRANTY SERVICE
For product operation and information assistance, please contact your Dealer or our Customer Care Centre at: Telephone #: (905) 624-5505
Fax #: (905) 238-2360 Web: www.panasonic.ca
For product repairs, please contact one of the following:
Your Dealer who will inform you of an authorized Servicentre nearest you.
Our Customer Care Centre at (905) 624-5505 or www.panasonic.ca
A Panasonic Factory Servicentre listed below:
Richmond,
British Columbia
Panasonic Canada Inc.
12111 Riverside Way
Richmond, BC
V6W 1K8
Tel: (604) 278-4211
Fax: (604) 278-5627

Calgary, Alberta

Mississauga, Ontario

Lachine, Qubec

Panasonic Canada Inc.

6835-8th St. N. E.
Calgary, AB
T2E 7H7
Tel: (403) 295-3955
Fax: (403) 274-5493

Panasonic Canada Inc.

5770 Ambler Dr.
Mississauga, ON
L4W 2T3
Tel: (905) 624-8447
Fax: (905) 238-2418

Panasonic Canada Inc.

3075, rue Louis A. Amos
Lachine, QC
H8T 1C4
Tel: (514) 633-8684
Fax: (514) 633-8020

IF YOU SHIP THE PRODUCT TO A SERVICENTRE

Carefully pack and send prepaid, adequately insured and preferably in the original carton.
Include details of the defect claimed, and proof of date of original purchase.

RQT7301

47

7301en.book 48

Instalacin bsica
Las conexiones del equipo descritas son ejemplos.
Antes de hacer la conexin, apague todos los equipos y lea los manuales de instrucciones apropiados.
El equipo perifrico y los cables opcionales se venden por separado a menos que se indique lo contrario.

Conexin de un televisor y videograbadora

14

indica accesorios incluidos.

indica accesorios no incluidos.
son conexiones necesarias. Conecte siguiendo el orden numerado.
Televisor
TV por cable

Cuando haga esta conexin,

asegrese de conectar los
cables de audio a los terminales
de entrada de audio
correspondientes del televisor.

Antena
exterior
Cable de alimentacin de CA
Conecte solamente despus de
haber terminado todas las otras
conexiones.

AUDIO IN
R L VIDEO IN S VIDEO IN

VHF/UHF
RF IN

COMPONENT
VIDEO IN

Antena
interior

Espaol

Rojo Blanco Amarillo

A la antena
A una toma de CA de casa

Cable coaxial de 75
abajo

Cable de
audio/vdeo

Cable de
antena

Cable de
S-Vdeo

Cable de vdeo
componente

Divisor

1
RF IN

S-VIDEO

VIDEO S-VIDEO

R - AUDIO - L

VIDEO S-VIDEO

(L1)

COMPONENT
VIDEO OUT
(480P/480I)

IN3

VIDEO

R - AUDIO - L

PR

OPTICAL

OUT

R - AUDIO - L

PB

IN1

Rojo Blanco Amarillo

DIGITAL AUDIO OUT

(PCM/BITSTREAM)

RF OUT
VHF/UHF

(L3)

Rojo Blanco Amarillo

Ventilador de refrigeracin

Esta unidad

A L1 o L3

Terminal S-VIDEO OUT

El terminal S-VIDEO OUT proporciona una imagen ms viva que
la del terminal VIDEO OUT. (Los resultados reales dependen del
televisor.)

Cable de
audio/vdeo

Utilice un divisor si tambin

quiere conectar la antena a
su videograbadora.

Terminal COMPONENT VIDEO OUT

Estos terminales se pueden utilizar para la salida entrelazada o progresiva
y para proporcionar una imagen ms pura que la del terminal S-VIDEO
OUT.
Conecte a los terminales del mismo color.

Cable coaxial de 75
La seal de imagen y sonido procedente de este aparato no pasa a
travs del cable coaxial de 75 al televisor. Asegrese de conectar
uno de los terminales siguientes de este aparato al televisor: el
terminal AUDIO/VIDEO OUT, el terminal S-VIDEO OUT o el
terminal COMPONENT VIDEO OUT. Si el televisor no tiene ninguno
de estos terminales, consulte a su concesionario local.

Cable coaxial
de 75

Rojo Blanco Amarillo

VIDEO
R
L
AUDIO OUT OUT

Videograbadora

VHF/UHF
RF IN

No conecte la unidad a travs de una videograbadora

Las seales de vdeo que pasan a travs de videograbadoras
afectarn a los sistemas de proteccin del copyright, y la imagen no
se mostrar correctamente en el televisor.

Televisor

Televisor

Esta unidad

Videograbadora

Videograbadora

Esta unidad

Cuando el aparato no se utilice durante mucho

tiempo
Para ahorrar energa, desenchufe el aparato de la toma de CA de
casa. El aparato consume una pequea cantidad de energa
aunque est apagado (2,9 W aproximadamente).

Cuando conecte a un televisor con videograbadora incorporada,

conecte a los terminales de entrada del televisor, no a los de la
videograbadora.
RQT7301

48

7301en.book 49

Ajuste de canales gua VCR Plusi

DVD POWER

Establezca estos canales gua para poder utilizar el nmero de

programacin VCR Plusi para la grabacin con temporizador.
Antes de iniciar los ajustes, prepare una grfica que muestre los
canales, nombres de emisoras y canales gua.
Ej.,

TV
POWER

INPUT SELECT TV/VIDEO

VOLUME

CH

CH

Nombre de
emisora

Canal
gua

Nmero
de canal

AUDIO

CBS

04

04

No es necesario

HBO

33

15

Introduzca el canal
15 a continuacin
del canal gua 33.

Nickelodeon

38

20

Introduzca el canal
20 a continuacin
del canal gua 38.

3
6
9
VCR Plus+ CM SKIP

CANCEL

CANCEL

0
SKIP

STOP

SLOW/SEARCH

PAUSE

PLAY/x1.3

DIRECT NAVIGATOR

FUNCTIONS

TOP MENU

3421
ENTER

ENTER
SUB MENU

RETURN

RETURN
PROG/CHECK DISPLAY

ADD/DLT

SETUP

STATUS TIME SLIP

ERASE REC MODE

REC

OPEN/CLOSE SETUP CHAPTER

F Rec

Mire cules son los canales gua

para las emisoras en revistas.

1
2

4
Sintonizacin automtica al enchufar

Pulse [ DVD POWER].

Select Language
Seleccione la Lengua
Slection de Langue
English

Anote todas las emisoras

que pueda recibir.

Si ha conectado una caja de TV por cable o un receptor de satlite,

el sistema VCR Plusi no funcionar si usted no ha establecido los
canales gua.

Preparacin
Encienda el televisor y seleccione la entrada de vdeo apropiada a
las conexiones de esta unidad.
Si conecta el aparato a travs de una caja de TV por cable o
receptor de satlite, sintonice su PBS local para hacer la puesta en
hora automtica del reloj. Si no hay PBS local, ponga la hora
manualmente en la pantalla Ajuste manual del reloj.

Ajuste de canal

Pulse [SETUP].
Pulse [3, 4] para seleccionar
Canal y pulse [1].
Pulse [3, 4] para seleccionar VCR
Plusr Ajuste canal y pulse [ENTER].

Espaol

DVD POWER

Pulse [3, 4] para seleccionar el canal

gua que quiere establecer y pulse [1].
Pulse [3, 4] para seleccionar el canal
correspondiente al canal gua y pulse [2].
Para borrar un nmero, pulse [ CANCEL].
Repita los pasos 4 y 5 para introducir otros canales.

Pulse [ENTER].

Para salir de la pantalla

Pulse [SETUP].
Para volver a la pantalla anterior
Pulse [RETURN].

Espaol
Franais
Press ENTER
Pulse ENTER
Appuyer sur ENTER

2
3

Seleccin del tipo de televisor

No tiene que cambiar el ajuste cuando conecte a un televisor de
aspecto estndar 4:3 que no sea compatible con salida progresiva.

Pulse [3, 4] para seleccionar

Espaol y pulse [ENTER].

1
2

Pulse [ENTER] para iniciar la

sintonizacin automtica al enchufar.

La unidad prosigue luego con Ajuste automtico reloj. La hora

se visualiza al terminar.

Pulse [SETUP].
Pulse [3, 4] para seleccionar
Pantalla TV y pulse [1].
Pulse [3, 4] para seleccionar Tipo
TV y pulse [ENTER].
Aspecto 4:3/Aspecto 16:9:
Televisor de
Televisor
aspecto
panormico 16:9
4:3
16:9
estndar 4:3
480P/480I: Seleccione 480P si el televisor es compatible
con salida progresiva.

Pulse [ENTER].

Si el reloj va una hora retrasado o adelantado

con relacin a la hora actual
1 Pulse [SETUP] para mostrar el men SETUP.
2 Ponga s1 o r1 en Ajuste del huso horario en la ficha
Configuracin utilizando [3, 4, 2, 1] y [ENTER].
3 Pulse [SETUP] para salir.

Si la unidad no puede ajustar el reloj

automticamente

Para salir de la pantalla

Pulse [SETUP].

Ponga manualmente la hora en la pantalla Ajuste manual del reloj.

Para volver a la pantalla anterior

Pulse [RETURN].

Pulse [3, 4] para seleccionar el

elemento y pulse [ENTER].

RQT7301

49

7301en.book 50

Grabacin de programas de televisin

Para detener la grabacin
DVD POWER

DVD POWER

Pulse [].
TV
POWER

INPUT SELECT TV/VIDEO

Grabado como 1 ttulo hasta la posicin donde par.

Para hacer una pausa en la grabacin

VOLUME

CH

Pulse [;].
Pulse de nuevo para reiniciar la grabacin.
(El ttulo no se divide en un ttulo separado.)
Botones
numerados

CH

AUDIO

0
SKIP

STOP

;
DIRECT
NAVIGATOR

SLOW/SEARCH

PAUSE

1
FUNCTIONS

TOP MENU

3421
ENTER

ENTER
SUB MENU

Espaol

PROG/CHECK

RETURN

PROG/CHECK DISPLAY

ADD/DLT

Modo de grabacin
VCR Plusi

PLAY/x1.3

DIRECT NAVIGATOR

STATUS TIME SLIP

ERASE REC MODE

REC

OPEN/CLOSE SETUP CHAPTER

F Rec

Dependiendo del contenido que est siendo grabado, los tiempos

de grabacin pueden ser inferiores a los indicados.
(Unidad: hora)
DVD-RAM
DVD-R
(4,7
Modo
Una cara
Dos caras
GB)
(4,7 GB)
(9,4 GB)
XP (Alta calidad)

SP (Normal)

LP (Duracin larga)
EP (Duracin extralarga)

TIME SLIP

3
4

Pulse [< OPEN/CLOSE] para abrir la

bandeja e introducir un disco.
Pulse de nuevo el botn para cerrar la bandeja.
Insrtelo con la cara
impresa hacia arriba. Insrtelo completamente en
su lugar hasta que haga un
ruido seco.

4
RQT7301

50

4
8 (6)

Durante la parada
1 Pulse [VCR Plusr].
2 Pulse los botones numerados para introducir el nmero VCR
Plusi y pulse [ENTER].
3 Haga las correciones necesarias utilizando [3, 4, 2, 1].
4 Pulse [ENTER].
Repita los pasos 14 para programar otras grabaciones.
5 Pulse [PROG/CHECK].
6 Pulse [ DVD POWER].
F se enciende en el visualizador de la unidad.

Reproduccin mientras usted est

grabando
[RAM]
Puede empezar a reproducir desde el comienzo
Reproduccin del ttulo que est grabando.
con
Pulse [1] (PLAY).
El indicador de salto hacia atrs de la unidad
presecucin
principal se enciende.

Grabacin y
reproduccin
simultneas

Puede reproducir un ttulo grabado previamente.

1 Pulse [DIRECT NAVIGATOR].
2 Pulse [3, 4, 2, 1] para seleccionar un
ttulo y pulse [ENTER].
Para salir de la pantalla Direct Navigator
Pulse [DIRECT NAVIGATOR].

Time Slip

Puede revisar las imgenes grabadas mientras

graba.
1 Pulse [TIME SLIP].
2 Pulse [3, 4] para seleccionar el tiempo y
pulse [ENTER].
Pulse [TIME SLIP] para mostrar las imgenes
de reproduccin completas. Pulse de nuevo
para mostrar las imgenes de reproduccin y
grabacin.

Pulse [W X CH] para seleccionar el canal.

Para seleccionar con los botones numerados:
Modo de TV (del aire)
Ej., 5:
[0] [5]
15:
[1] [5]
Modo CATV (Cable)
Ej., 5:
[0] [0] [5]
15:
[0] [1] [5]
115:
[1] [1] [5]

8
16 (12)

Cuando Tiempo de grab. en el modo EP se haya puesto en EP (6H)

en el men SETUP.
La calidad del sonido es mejor cuando se utiliza EP (6H) que
cuando se utiliza EP (8H).

Insrtelo con la flecha hacia arriba.

4
8 (6)

Utilizacin del nmero VCR Plusi para hacer

grabaciones con temporizador

[RAM] [DVD-R]
No es posible grabar continuamente desde una cara a la otra en un
disco de dos caras. Tendr que expulsar el disco y darlo la vuelta.
Cuando utilice discos DVD-RAM de 8 cm (3), retire el disco del
cartucho.
Puede grabar hasta 99 ttulos en un disco.
No es posible grabar material protegido CPRM (proteccin del
contenido de medios grabables) en discos DVD-R o DVD-RAM de
2,8 GB.

Durante la grabacin

Pulse [ REC] para seleccionar el tiempo de grabacin.

VCR Plus+ CM SKIP

CANCEL

Para especificar un tiempo y detener la grabacin

Para detener la reproduccin

Pulse [].

Pulse [REC MODE] para seleccionar el

modo de grabacin (XP, SP, LP o EP).
Pulse [ REC] para empezar a grabar.

Para detener la grabacin

La grabacin se har en el espacio vaco del disco. Los datos

no se escribirn encima de otros.
Durante la grabacin no se puede cambiar el canal ni el
modo de grabacin.

Pulse [] y luego [ENTER] antes de que pasen 5 segundos.

Tambin puede mantener pulsado [] en el aparato principal
durante ms de 3 segundos para detener la grabacin.

2 segundos despus se detiene la reproduccin

Pulse [].

Para detener la grabacin con temporizador

7301en.book 51

Reproduccin de discos
Cuando aparece una pantalla de men en el televisor

VOLUME

CH

INPUT SELECT TV/VIDEO

Botones
numerados

[DVD-A] [DVD-V]
Pulse [3, 4, 2, 1] para seleccionar el elemento y pulse [ENTER].
Algunos elementos tambin se pueden seleccionar con los botones
numerados.
[VCD]
Pulse los botones numerados para seleccionar el elemento.
Ej., 5:
[0] [5]
15: [1] [5]

TV
POWER

CH
AUDIO

9
VCR Plus+ CM SKIP

CANCEL

0
SKIP

:9

STOP

PAUSE

PLAY/x1.3

DIRECT NAVIGATOR

DIRECT NAVIGATOR
TOP MENU

CM SKIP

SLOW/SEARCH

65

Operaciones durante la reproduccin

2
Parada

Pulse [].
La posicin de parada se memoriza.
PLAY parpadea en el
DVD - R AM
visualizador del aparato.
PLAY
(Excepto cuando se reproduce
desde Direct Navigator y
cuando se reproduce una lista de reproduccin.)
Funcin de reanudacin de la reproduccin
Pulse [1] (PLAY) para reanudar la reproduccin
desde esta posicin.

Pausa

Pulse [;].
Pulse de nuevo para reiniciar la reproduccin.

Bsqueda

Pulse [6] o [5].

En el aparato principal, mantenga pulsado
[D] o [E].
La velocidad aumenta hasta 5 pasos.
Pulse [1] (PLAY) de nuevo para reiniciar la
reproduccin.

Salto

Pulse [:] o [9].

En el aparato principal, pulse [D] o [E].
Cada pulsacin aumenta el nmero de saltos.

Inicio desde
un elemento
seleccionado

Pulse los botones numerados.

Ej., 5:
[0] [5]
15: [1] [5]
[CD] (Discos MP3 solamente)
5:
[0] [0] [5] 15: [0] [1] [5]
[DVD-A] Seleccin de un grupo
Durante la parada (el salvapantallas se visualiza
en el televisor)
5:
[5]
Esto slo funciona durante la parada con algunos
discos (el salvapantalla est en el televisor).

Visin rpida
[RAM]

La velocidad de reproduccin puede aumentar sin

distorsionar el audio.
Mantenga pulsado [1] (PLAY/a1.3).
Pulse de nuevo para volver a la velocidad normal.

Cmara lenta
[RAM] [DVD-R]
[DVD-A] (Parte
de imagen en
movimiento
solamente)
[DVD-V] [VCD]

Durante la pausa, pulse [6] o [5].

En el aparato principal, mantenga pulsado
[D] o [E].
La velocidad aumenta hasta 5 pasos.
Pulse [1] (PLAY) de nuevo para reiniciar la
reproduccin.
Sentido de avance solamente. [VCD]

Cuadro a
cuadro
[RAM] [DVD-R]
[DVD-A] (Parte
de imagen en
movimiento
solamente)
[DVD-V] [VCD]

Durante la pausa, pulse [2;] o [;1].

Cada pulsacin muestra el cuadro siguiente.
Pulse [1] (PLAY) para reiniciar la reproduccin.
Sentido de avance solamente. [VCD]

Visualizacin
de la imagen
de televisin
en el modo de
imagen en
imagen

Pulse [TIME SLIP].

El aparato visualiza la imagen de televisin en el
modo de imagen en imagen.
Pulse de nuevo [TIME SLIP] para cancelar.

Salto del
tiempo
especificado
(Time Slip)
[RAM] [DVD-R]

1 Pulse [TIME SLIP].

2 Pulse [3, 4] para seleccionar el tiempo y
pulse [ENTER].
La reproduccin salta el tiempo especificado.
Pulse [TIME SLIP] para mostrar las imgenes
de reproduccin completas.

FUNCTIONS

TOP MENU
ENTER
SUB MENU

RETURN

SUB MENU
PROG/CHECK DISPLAY

ADD/DLT

STATUS TIME SLIP

ERASE REC MODE

REC

OPEN/CLOSE SETUP CHAPTER

F Rec

3421
ENTER
2; ;1
RETURN
TIME SLIP

No es posible reproducir continuamente desde una cara a la otra

en un disco de dos caras. Tendr que expulsar el disco y darlo la
vuelta.
Cuando utilice discos DVD-RAM de 8 cm (3), retire el disco del
cartucho.

Para volver a la pantalla de men

[DVD-A] Pulse [TOP MENU].
[DVD-V] Pulse [TOP MENU] o [SUB MENU].
[VCD] Pulse [RETURN].

Pulse [< OPEN/CLOSE] para abrir la

bandeja e introducir un disco.
Pulse de nuevo el botn para cerrar la bandeja.

Pulse [1] (PLAY).

[RAM] [DVD-R]
La reproduccin empieza desde el ttulo grabado ms
recientemente.
[DVD-A] [DVD-V] [VCD] [CD]
La reproduccin empieza desde el comienzo del disco.

Seleccin de programas (ttulos) grabados para

reproducir
[RAM] [DVD-R]

1 Pulse [DIRECT NAVIGATOR].

DIRECT NAVIGATOR
DVD-RAM

Vista titulo
--

07

08

10 10/27 Lun

8 10/27 Lun

--

--

Ant.
Repr.

--

02/02

SUB MENU

Sig.

Seleccionar

2 Pulse [3, 4, 2, 1] para seleccionar el ttulo y

pulse [ENTER].
Tambin puede seleccionar ttulos con los botones numerados.
Ej., 5:
[0] [5]
15: [1] [5]
Para salir de la pantalla
Pulse [DIRECT NAVIGATOR].

Salto CM
[RAM] [DVD-R]

La reproduccin se reanuda un minuto despus

aproximadamente.
Pulse [CM SKIP].

Espaol

DVD POWER

RQT7301

51

7301en.book 4

Index
Angle. . . . . . . . . . . . . . . . . . . . . . . . . . . .
Antenna system . . . . . . . . . . . . . . . . . .
Audio
attribute . . . . . . . . . . . . . . . . . . . . . .
language . . . . . . . . . . . . . . . . . . . . .
playback. . . . . . . . . . . . . . . . . . . . . .
receiving, recording . . . . . . . . . . . . .

26
11
26
36
24
17

Channel
adding, deleting . . . . . . . . . . . . . . . . 11
audio . . . . . . . . . . . . . . . . . . . . . . . . 26
Auto Channel Setting. . . . . . . . . . . . 11
captions . . . . . . . . . . . . . . . . . . . . . . 13
VCR Plusi guide channel. . . . . . . . 12
Change Thumbnail . . . . . . . . . . . . . . . . 29
Chasing playback . . . . . . . . . . . . . . . . . 17
Cleaning
disc . . . . . . . . . . . . . . . . . . . . . . . . . 15
lens . . . . . . . . . . . . . . . . . . . . . . . . . 39
main unit . . . . . . . . . . . . . . . . . . . . . 39
Clock setting . . . . . . . . . . . . . . . . . . . . . 38
CM Skip. . . . . . . . . . . . . . . . . . . . . . . . . . 23
Connection
amplifier, system component . . . . . . 9
antenna . . . . . . . . . . . . . . . . . . . . . 7, 8
cable TV box, satellite receiver . . . . . 8
L2 input terminals . . . . . . . . . . . . . . 18
television . . . . . . . . . . . . . . . . . . . . . . 7
video cassette recorder . . . . . . . . 7, 18
Copy (play list) . . . . . . . . . . . . . . . . . . . . 31
CPRM . . . . . . . . . . . . . . . . . . . . . . . . . . . 40
Create play lists . . . . . . . . . . . . . . . . . . . 30
Dialog Enhancer . . . . . . . . . . . . . . . . . .
Direct Navigator . . . . . . . . . . . . . . . . . . .
Divide Chapter . . . . . . . . . . . . . . . . . . . .
DVD-RAM, DVD-R . . . . . . . . . . . . . . . . .

27
28
29
15

Enter name
disc . . . . . . . . . . . . . . . . . . . . . . . . . . 33
play list . . . . . . . . . . . . . . . . . . . . . . . 31
title . . . . . . . . . . . . . . . . . . . . 19, 20, 29
Erase
chapter . . . . . . . . . . . . . . . . . . . . . . . 29
chapter in play list . . . . . . . . . . . . . . 31
play list . . . . . . . . . . . . . . . . . . . . . . . 31
title . . . . . . . . . . . . . . . . . . . . . . . 24, 29
Finalize . . . . . . . . . . . . . . . . . . . . . . . 33, 40
Flexible Recording . . . . . . . . . . . . . . . . . 18
Format disc . . . . . . . . . . . . . . . . . . . . . . . 33
FR (Flexible Recording Mode) . . . . . . . . 17
FUNCTIONS window. . . . . . . . . . . . . . . . 35
Language
audio . . . . . . . . . . . . . . . . . . . . . . . . . 36
code list . . . . . . . . . . . . . . . . . . . . . . 40
on-screen . . . . . . . . . . . . . . . . . . . . . 37
sound track . . . . . . . . . . . . . . . . . . . . 26
subtitle . . . . . . . . . . . . . . . . . . . . 26, 36
Menu
MP3 . . . . . . . . . . . . . . . . . . . . . . . . . 25
on-screen . . . . . . . . . . . . . . . . . . . . . 26
SETUP . . . . . . . . . . . . . . . . . . . . . . . 36
Mode
recording. . . . . . . . . . . . . . . . . . . . . . 17
Still Mode . . . . . . . . . . . . . . . . . . . . . 36
MPEG-DNR . . . . . . . . . . . . . . . . . . . . . . . 27
MP3 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 25
Noise redction (NR)
MPEG-DNR . . . . . . . . . . . . . . . . . . . 27
Line-in NR. . . . . . . . . . . . . . . . . . . . . 36
On-screen
language . . . . . . . . . . . . . . . . . . . . . . 37
menus . . . . . . . . . . . . . . . . . . . . . . . . 26
Status messages . . . . . . . . . . . . . . . 35

- VISIBLE AND INVISIBLE LASER RADIATION WHEN OPEN.

(FDA 21 CFR)
AVOID DIRECT EXPOSURE TO BEAM.
CAUTION - VISIBLE AND INVISIBLE LASER RADIATION WHEN OPEN.
AVOID EXPOSURE TO BEAM.
(IEC60825-1)
ATTENTION - RAYONNEMENT LASER VISIBLE ET INVISIBLE EN CAS DOUVERTURE.
EXPOSITION DANGEREUSE AU FAISCEAU.
ADVARSEL - SYNLIG OG USYNLIG LASERSTRLING VED BNING.
UNDG UDSTTELSE FOR STRLING.

Quick View . . . . . . . . . . . . . . . . . . . . . . . .23

Ratings level . . . . . . . . . . . . . . . . . . . . . .36
Recording
Flexible Recording. . . . . . . . . . . . . . .18
mode . . . . . . . . . . . . . . . . . . . . . . . . .17
timer. . . . . . . . . . . . . . . . . . . . . . .1921
Re-initialize settings . . . . . . . . . . . . . . . .36
Repeat play . . . . . . . . . . . . . . . . . . . . . . .27
Resume play function . . . . . . . . . . . . . . .23
SETUP menu . . . . . . . . . . . . . . . . . . . . . .36
Shorten (titles) . . . . . . . . . . . . . . . . . . . . .29
Simultaneous rec and play . . . . . . . . . . .17
Sound track . . . . . . . . . . . . . . . . . . . . . . .26
Status messages . . . . . . . . . . . . . . . . . . .35
Subtitle . . . . . . . . . . . . . . . . . . . . . . . . . . .26
Time Slip. . . . . . . . . . . . . . . . . . . . . . .17, 23
Timer recording . . . . . . . . . . . . . . . . .1921
Transfer . . . . . . . . . . . . . . . . . . . . . . . . . .27
TV Type. . . . . . . . . . . . . . . . . . . . . . . . . . .14
VCR Plusi
guide channel . . . . . . . . . . . . . . . . . .12
timer recording. . . . . . . . . . . . . . . . . .19
V.S.S. . . . . . . . . . . . . . . . . . . . . . . . . . . . .27

This product may receive radio interference caused by mobile

telephones during use. If such interference is apparent, please
increase separation between the product and the mobile
telephone.

DANGER

VARO!

PCM Down Conversion . . . . . . . . . . . . . .37

Picture . . . . . . . . . . . . . . . . . . . . . . . . . . .27
Play list . . . . . . . . . . . . . . . . . . . . . . . . . . .30
Progressive . . . . . . . . . . . . . . . . . . . .27, 40
Properties
play list. . . . . . . . . . . . . . . . . . . . . . . .31
title . . . . . . . . . . . . . . . . . . . . . . . . . . .29
Protection
cartridge. . . . . . . . . . . . . . . . . . . . . . .15
disc . . . . . . . . . . . . . . . . . . . . . . . . . .33
title . . . . . . . . . . . . . . . . . . . . . . . . . . .29

- AVATTAESSA OLET ALTTIINA NKYV JA NKYMTN

LASERSTEILYLLE. L KATSO STEESEEN.

VARNING - SYNLIG OCH OSYNLIG LASERSTRLNING NR DENNA DEL

R PPNAD. BETRAKTA EJ STRLEN.

Except for U.S.A. and Canada

ADVARSEL - SYNLIG OG USYNLIG LASERSTRLING NR DEKSEL PNES.

UNNG EKSPONERING FOR STRLEN.
VORSICHT - SICHTBARE UND UNSICHTBARE LASERSTRAHLUNG, WENN ABDECKUNG
GEFFNET. NICHT DEM STRAHL AUSSETZEN.
-

RQLS0233

(Inside of product)

The socket outlet shall be installed near the equipment and easily
accessible or the mains plug or an appliance coupler shall remain
readily operable.

[For\units\with\PX\printed\on\the\outer\packaging]
THIS UNIT IS INTENDED FOR USE IN MODERATE CLIMATES.

RF IN

S-VIDEO

VIDEO S-VIDEO

R - AUDIO - L

VIDEO S-VIDEO

(L1)

COMPONENT
VIDEO OUT
(480P/480I)

IN3

VIDEO

R - AUDIO - L

PR

OPTICAL

OUT

R - AUDIO - L

PB

IN1

DIGITAL AUDIO OUT

(PCM/BITSTREAM)

(L3)

RF OUT
VHF/UHF

Except for U.S.A. and

Canada

[For\U.S.A.]
Panasonic Consumer Electronics
Company, Division of Matsushita
Electric Corporation of America
One Panasonic Way Secaucus,
New Jersey 07094
http://www.panasonic.com

Panasonic Sales Company,

Division of Matsushita Electric
of Puerto Rico, Inc. (PSC)
Ave. 65 de Infantera, Km. 9.5
San Gabriel Industrial Park, Carolina,
Puerto Rico 00985

[For\units\with\PX\printed\on\the\outer\packaging]
Matsushita Electric Industrial Co., Ltd.
Corporate Management Division for the Americas
Sales Office for North America
Tokyo Panasonic Sales Section
32nd Floor, World Trade Center 4-1,
Hamamatsu-cho, 2-Chome, Minato-Ku,
Tokyo 105-6132, Japan
C 2004 Matsushita Electric Industrial Co., Ltd.

[For\Canada]
Panasonic Canada Inc.
5770 Ambler Drive
Mississauga, Ontario
L4W 2T3
www.panasonic.ca

pr

Panasonic Marketing Europe G.M.B.H. Wiesbaden N.

(a Division of Panasonic Marketing G.M.B.H.)
Military Sales Department
6200 Wiesbaden-Biebrich,
Hagenauerstr. 43
Germany

RQT7301-1P
F0104YU2034