CORTEC
MiCOM P132
Effective as from...
Name
xx.yy.zzzz
Order number
PCS Cell No.
Feeder Management and Bay Control P132
1234 5 6
P132- N N
Feeder Management and Bay Control P132
P132-
Basic device:
Basic device 24TE, pin-terminal connection,
Basic device 24TE, CT/VT ring-, I/O pin-terminal connection,
Basic device 40TE, pin-terminal connection,
Basic device 40TE, CT/VT ring-, I/O pin-terminal connection,
Basic device 84TE, ring-terminal connection,
basic complement with 4 binary inputs and 8 output relays;
6 function keys (40TE and 84TE only)
7
N
9
-308
1
2
3
5
8
Mounting option and display:
Surface-mounted, local control panel with text display
Flush-mounted, local control panel with text display
Surface-mounted, with detachable HMI 16)
Flush-mounted, with detachable HMI 16)
0
9
-7xx
-47x
-46x
16
A
17
A
-9x x -9x x
18
A
-8xx
0
4
5
20)
Additional binary I/O options: 16)
Without
With 1 binary module (add. 6 binary inputs and 8 output relays)
0
1
With 2 binary modules (add. 12 binary inputs and 16 output relays)
With 1 binary module (add. 6 binary inputs and 6 output relays (2-pole))
for the control of up to 3 switchgear units
With 1 binary module (add. 6 binary inputs and 6 output relays (2-pole))
and 1 binary module (add. 6 binary inputs and 6 output relays (2-pole))
for the control of up to 3 switchgear units
With 1 binary module (add. 6 binary inputs and 8 output relays)
and 1 binary module (add. 6 binary inputs and 6 output relays (2-pole))
for the control of up to 3 switchgear units
5
6
Power supply and additional outputs:
VA,nom = 24 VDC
VA,nom = 48 ... 250 VDC / 100 ... 230 VAC
VA,nom = 24 VDC and 6 output relays, 4 with thyristor
VA,nom = 48 ... 250 VDC / 100 ... 230 VAC
and 6 output relays, 4 with thyristor
VA,nom = 24 VDC and 6 output relays
VA,nom = 48 ... 250 VDC / 100 ... 230 VAC and 6 output relays
VA,nom = 24 VDC and 6 output relays and 3 binary inputs
VA,nom = 48 ... 250 VDC / 100 ... 230 VAC and 6 output relays and 3 binary inputs
VA,nom = 24 VDC and 4 high break contacts
VA,nom = 48 ... 250 VDC / 100 ... 230 VAC and 4 high break contacts
Further add. options: 16)
Without
With TGF (transient ground fault direction determination) module
With analogue module
3) 10)
With TGF and analogue module
With binary module (add. 24 binary inputs)
3) 10)
With TGF and binary module (add. 24 binary inputs)
With RTD module 3) 12)
With RTD and analogue module 3) 12)
With RTD module and binary module (add. 24 binary inputs) 3) 12)
3
4
6
7
8
9
A
B
C
D
0
1
2
3
4
5
7
8
9
3) 10)
Binary Modules with single pole high break contacts for control:
Without high break contact characteristic
With 1 module with high break contacts (1-pole)
With 2 modules with high break contacts (1-pole)
Page 1 of 2
-613
15
A
3
4
7
9
Inom = 1 A / 5 A (T1...T4) 2)
Switching threshold on binary inputs:
>18 V (standard variant)
>90 V (60...70% of VA,nom = 125...150 V) 8)
>155 V (60...70% of VA,nom = 220...250 V) 8)
>73 V (67% of VA,nom = 110 V) 8)
-4xx
14
A
-420
-421
-425
-426
-427
Current transformer:
11)
Without
Voltage transformer:
11)
Without
Vnom = 50 ... 130 V (4-pole)
Vnom = 50 ... 130 V (5-pole) for automatic synchronism control
12, 13
AA
8 9 10 11
N N N N
19)
-471
-472
Without order extension no.
-461
-462
-463
P132 Cortec.xls
12/08/2009
CORTEC
>146 V (67% of VA,nom = 220 V)
8)
-464
Only IRIG-B input for clock synchronization
-90 0
Protocol can be switched between:
IEC 60870-5-101/-103, Modbus, DNP3, Courier
and IRIG-B input for clock synchronization
and 2nd interface (RS485, IEC 60870-5-103)
For connection to wire, RS485, isolated
For connection to plastic fibre, FSMA connector
For connection to glass fibre, ST connector
Protocol IEC61850:
For connection to 100 Mbit/s Ethernet, glass fibre SC and wire RJ45
and 2nd interface (RS485, IEC 60870-5-103)
For connection to 100 Mbit/s Ethernet, glass fibre ST and wire RJ45
and 2nd interface (RS485, IEC 60870-5-103)
-92
With guidance / protection interface:
Protocol InterMiCOM
1
2
4
-94
6
7
16)
-95
For connection to wire, RS485, isolated
For connection to plastic fibre, FSMA connector
For connection to glass fibre, ST connector
For connection to wire, RS232, isolated
Language:
English (German) 4)
Px40 English (English) 4)
German (English) 4)
French (English) 4)
Spanish (English) 4)
Polish (English) 4)
Russian (English) 4) 7)
1
2
4
5
Without order extension no.
on request
on request
on request
on request
on request
-800
-801
-802
-803
-804
-805
2) Switching via parameter, default setting is underlined!
Page 2 of 2
P132 Cortec.xls
12/08/2009
