LIQUID FOR CLEANING RE-BARS & STEEL SURFACES
REPAIR PRODUCTS
Dr. Fixit Rust Remover
Dr. Fixit Rust Remover is based on chloride free chemical & additive solution in water. it is used as rust
remover which effectively cleans rust from steel surfaces, before application of any protective coating.
Areas of Application
On re-bars during repairs to reinforced concrete structures.
Maintenance of mild steel structures like tanks, water pipelines, shuttering plates and other corroded
steel surfaces.
Features & Benefits
Ease of application - Ready to use, easily applicable by brush.
Penetration & effect - effective rust removal even from areas difficult to reach & penetrate.
Chloride free - Contains no chloride hence no chance of enhancing further corrosion.
Economical - Cost effective because of good coverage.
Method of Application
1 S U R FAC E P R E PA R ATI O N
In case of heavy rusting of steel reinforcement, M.S. pipelines, M.S. plates or any other M.S. surface,
removethe loose rust by wire brushing, chipping, hammering or grinding so that majority of rust scale
is removed.
2 A P P L I CATI O N
Apply Dr. Fixit Rust Remover on affected surface by using cotton waste swab or by brush application.
Leave the surface to react with Dr. Fixit Rust Remover for at least 15 to 30 minutes.
The rusty surface will change its colour to original blackish steel, remove the same with cotton cloth.
Then remove the loose rust particles by scrubbing or simple dusting with the brush.
Wash the steel surface with water jet to remove all the acidic residue left on the bar, and clean with cotton
cloth
3 F I N IS H
When applied over corroded reinforcement steel, wash the surface with clean water before taking up further
work of repairs.
Precautions & Limitations
Dr. fixit Rust Remover is acidic in nature, when applied to clean the rusted rebars. Ensure that traces of acid
are removed completely by washing with a water jet, before applying coatings or primers.
For the rough removal of rust, opt for shot blasting.
Technical Information
PROPERTIES
SPECIFICATION
RESULTS
Appearance
Water consistency liquid
Colour
Brown
PH
Acidic
Sp. gravity
1.20 +/- 0.03
Dr. Fixit Rust Remover
Description
LIQUID FOR CLEANING RE-BARS & STEEL SURFACES
REPAIR PRODUCTS
Dr. Fixit Rust Remover
Approximately 15 to 20 m2 / liter.
Packing
500 ml, 1 litre
Shelf Life & Storage
Shelf life is 24 months from the date of manufacturing in unopened condition. Store at cool & dry place away
from sunlight & naked flames.
Health & Safety Precautions
As with all chemical products, caution should always be exercised.
Use of safety hand gloves is recommended.
Treat any contact to the skin or eyes with fresh water immediately.
Should any of the products be accidentally swallowed, do not induce vomiting but call for medical
assistance immediately.
Other Product Categories Available
DR. FIXIT has wide range of Waterproofing & Construction chemicals which includes,
Waterproofing Products
Repair Products
Sealants
Flooring Products
Exterior Coating Products
Tile Fixing Range
Concrete Admixtures
Grouts
Pidilite Industries Limited
Construction Chemicals Division
Ramkrishna Mandir Road
Post Box No. 17411
Andheri (E) Mumbai 400059 INDIA
Tel +91-22-2835 7000 Fax +91-22-2835 7008
website www.doctor-fixit.com E-mail drfixit@pidilite.com
Toll Free No.: 1800-22-5502
DISCLAIMER The product information & application details given by the
company & its agents has been provided in good faith & meant to serve
only as a general guideline during usage. Users are advised to carry
out tests & take trials to ensure on the suitability of products meeting
their requirement prior to full scale usage of our products. Since the
correct identification of the problems, quality of other materials used
and the on-site workmanship are factors beyond our control, there are
no expressed or implied guarantee / warranty as to the results obtained.
The company does not assume any liability or consequential damage for
unsatisfactory results, arising from the use of our products.
Dr. Fixit Rust Remover
Coverage / Usage
