Scribd
Upload
1K views3 pages

PQR

This document is a Procedure Qualification Record (PQR) that documents the qualification testing of welding procedures according to ASME Section IX. It includes information such as the welding process, base and filler metals, joint design, welding parameters, post-weld heat treatment, test results including tensile, bend, impact, and fillet weld tests to qualify the procedure. Upon successful testing, the PQR certifies the welding procedure was prepared, welded, and tested in accordance with ASME Code requirements.

Uploaded by

nazirulhakim
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as DOC, PDF, TXT or read online on Scribd
1K views3 pages

PQR

This document is a Procedure Qualification Record (PQR) that documents the qualification testing of welding procedures according to ASME Section IX. It includes information such as the welding process, base and filler metals, joint design, welding parameters, post-weld heat treatment, test results including tensile, bend, impact, and fillet weld tests to qualify the procedure. Upon successful testing, the PQR certifies the welding procedure was prepared, welded, and tested in accordance with ASME Code requirements.

Uploaded by

nazirulhakim
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as DOC, PDF, TXT or read online on Scribd
You are on page 1/ 3

PROCEDURE QUALIFICATION RECORDS ( PQR )

Section IX, ASME Boiler and Pressure Vessel Code


Company Name :
Procedure Qualification Record No.

Date

WPS No.
Welding Process(es)

Type(s)
(Automatic, Manual, Machine, or Semi-Auto.)

JOINTS ( QW-402 )
Groove Design of Test Coupon
( For combination qualifications, the deposited weld metal thickness shall be recorded for each filler metal or process used )
BASE METALS ( QW-403 )

POSTWELD HEAT TREATMENT ( QW-407 )

Material Specification

Temperature

Type or Grade

Time

P. No

To P. No

Other

Thickness of Test Coupon


Diameter of Test Coupon
Other
GAS ( QW-408 )
Gas(es)

FILLER METALS ( QW-409 )


SFA Specification
AWS Classification

Percent Composition
(Mixture)

Flow Rate

Shielding
Trailing
Backing
ELECTRICAL CHARACTERISTICS ( QW-409 )

Filler Metal F-No.


Weld Metal Analysis A-No.

Current
Polarity

Size of Filler Metal

Amps

Other

Tungsten Electrode Size

Volts

Other
Weld Metal Thickness
POSITION (QW-405 0
Position of Groove
Weld Progression ( Uphill, Downhill )
Other
PREHEAT (QW-406 )
Preheat Temp.
Interpass Temp.
Other

Fik_ASME-IX

TECHNIQUE ( QW-410 )
Travel Speed
String or Weave Bead
Oscillation
Multipass or Single Pass ( per side )
Single or Multiple Electrodes
Other

Page 1

Tensile Test ( QW-150 )

Specimen
No.

Width

Thickness

Area

Ultimate
Total Load

Type of
Failure &
Location

Ultimate
Unit Stress

Guide Bend Tests ( QW-160 )


Type and Figure No.

Result

Toughness Tests ( QW-170 )

Specimen
No.

Notch
Location

Specimen
Size

Test
Temp.

Impact Values
Ft. lbs

% Shear

Mils

Drop Weight Break (Y/N)

Comments :

Fillet-Weld Test ( QW-180 )


Result - Satisfactory: Yes

No

Penetration into Parent Metal: Yes

No

Macro - Result

Other Test
Type of Test
Deposit Analysis
Other

Welder's Name
Fik_ASME-IX

I/C No

Stamp No

Page 2

Test conducted by:

Laboratory Test No

We certify that the statements in the record and that the test welds are prepared, welded, and tested in accordance with the requirements of ASME Code.

Manufacturer
Date

Fik_ASME-IX

By

Page 3

You might also like