First Author Name1, Second Author Name2, Third Author Name3

First Author Affiliation1 , Second Author Affiliation2, Third Author Affiliation 3

First Author Email1, Second Author Email2, Third Author Email3

Paper Title

If you must use mixed units, clearly state the units

quantity in an equation.
The SI unit for magnetic field strength H
However, if you wish to use units of T, either
magnetic flux density B or magnetic field
symbolized as 0H. Use the center dot to
compound units, e.g., Am 2.

Abstract These instructions give you guidelines for

preparing papers for the International conference. Use this
document as a template if you are using Microsoft Office Word
6.0 or later. Otherwise, use this document as an instruction set.
The electronic file of your paper will be formatted further at
International Journal of Computer Theory and Engineering.
Define all symbols used in the abstract. Do not cite references
in the abstract. Do not delete the blank line immediately above
the abstract; it sets the footnote at the bottom of this column.

for each
is A/m.
refer to
strength
separate

V.HELPFUL HINTS
A. Figures and Tables
Because the final formatting of your paper is limited in
scale, you need to position figures and tables at the top and
bottom of each column. Large figures and tables may span
both columns. Place figure captions below the figures; place
table titles above the tables. If your figure has two parts,
include the labels (a) and (b) as part of the artwork.
Please verify that the figures and tables you mention in the
text actually exist. Do not put borders around the outside
of your figures. Use the abbreviation Fig. even at the
beginning of a sentence. Do not abbreviate Table. Tables
are numbered with Roman numerals.
Include a note with your final paper indicating that you
request color printing. Do not use color unless it is
necessary for the proper interpretation of your figures.
There is an additional charge for color printing.
Figure axis labels are often a source of confusion. Use
words rather than symbols. As an example, write the
quantity Magnetization, or Magnetization M, not just
M. Put units in parentheses. Do not label axes only with
units. As in Fig. 1, for example, write Magnetization
(A/m) or Magnetization (A m1), not just A/m. Do
not label axes with a ratio of quantities and units. For
example, write Temperature (K), not Temperature/K.
Multipliers can be especially confusing. Write
Magnetization (kA/m) or Magnetization (10 3 A/m). Do
not write Magnetization (A/m) 1000 because the reader
would not know whether the top axis label in Fig. 1 meant
16000 A/m or 0.016 A/m. Figure labels should be legible,
approximately 8 to 12 point type.

Index TermsAbout four key words or phrases in

alphabetical order, separated by commas.

I. INTRODUCTION
Highlight a section that you want to designate with a
certain style, and then select the appropriate name on the
style menu. The style will adjust your fonts and line
spacing. Do not change the font sizes or line spacing to
squeeze more text into a limited number of pages. Use
italics for emphasis; do not underline.
II.PROCEDURE FOR PAPER SUBMISSION
A. Review Stage
Submit your manuscript electronically for review.
B. Final Stage
When you submit your final version, after your paper has
been accepted, prepare it in two-column format, including
figures and tables.

C. Figures
As said, to insert images in Word, position the cursor at
the insertion point and either use Insert | Picture | From File
or copy the image to the Windows clipboard and then Edit |
Paste Special | Picture (with Float over text unchecked).
The authors of the accepted manuscripts will be given a
copyright form and the form should accompany your final
submission.
III. MATH

B. References
Number citations consecutively in square brackets [1].
The sentence punctuation follows the brackets [2]. Multiple
references [2], [3] are each numbered with separate
brackets [1][3]. When citing a section in a book, please
give the relevant page numbers [2]. In sentences, refer
simply to the reference number, as in [3]. Do not use Ref.
[3] or reference [3] except at the beginning of a
sentence: Reference [3] shows ... . Number footnotes
separately in superscripts (Insert | Footnote). 1 Place the
actual footnote at the bottom of the column in which it is
cited; do not put footnotes in the reference list (endnotes).
Use letters for table footnotes (see Table I).
Please note that the references at the end of this
document are in the preferred referencing style. Give all
authors names; do not use et al. unless there are six
authors or more. Use a space after authors' initials. Papers

If you are using Word, use either the Microsoft Equation

Editor or the MathType add-on (http://www.mathtype.com)
for equations in your paper (Insert | Object | Create New |
Microsoft Equation or MathType Equation). Float over
text should not be selected.
IV. UNITS
Use either SI (MKS) or CGS as primary units. (SI units
are strongly encouraged.) English units may be used as
secondary units (in parentheses). This applies to papers in
data storage. For example, write 15 Gb/cm2 (100
Gb/in 2). An exception is when English units are used as
identifiers in trade, such as 3 in disk drive. Avoid
combining SI and CGS units, such as current in amperes
and magnetic field in oversteps. This often leads to
confusion because equations do not balance dimensionally.

that have not been published should be cited as

unpublished [4]. Papers that have been submitted for
publication should be cited as submitted for publication
[5]. Papers that have been accepted for publication, but not
yet specified for an issue should be cited as to be
published [6]. Please give affiliations and addresses for
private communications [7].

preferred: A, B, and C instead of A, B and C.

If you wish, you may write in the first person singular or
plural and use the active voice (I observed that ... or We
observed that ... instead of It was observed that ...).
Remember to check spelling. If your native language is not
English, please get a native English-speaking colleague to
proofread your paper.

C. Abbreviations and Acronyms

Define abbreviations and acronyms the first time they are
used in the text, even after they have already been defined
in the abstract. Abbreviations such as SI, ac, and dc do not
have to be defined. Abbreviations that incorporate periods
should not have spaces: write C.N.R.S., not C. N. R. S.
Do not use abbreviations in the title unless they are
unavoidable (for example, INTERNATIONAL JOURNAL
OF
ENGINEERING
AND
INNOVATIVE
TECHNOLOGY in the title of this article).

VI. SOME COMMON MISTAKES

The word data is plural, not singular. The subscript for

the permeability of vacuum 0 is zero, not a lowercase letter
o. The term for residual magnetization is remanence;
the adjective is remanent; do not write remnance or
remnant. Use the word micrometer instead of
micron. A graph within a graph is an inset, not an
insert. The word alternatively is preferred to the word
alternately (unless you really mean something that
alternates). Use the word whereas instead of while
D. Equations
(unless you are referring to simultaneous events). Do not
Number equations consecutively with equation numbers use the word essentially to mean approximately or
effectively. Do not use the word issue as a euphemism
in parentheses flush with the right margin, as in (1). First
for problem. When compositions are not specified,
use the equation editor to create the equation. Then select
separate chemical symbols by en-dashes; for example,
the Equation markup style. Press the tab key and write
the equation number in parentheses. To make your NiMn indicates the intermetallic compound Ni 0.5Mn0.5
whereas NiMn indicates an alloy of some composition
equations more compact, you may use the solidus ( / ), the
exp function, or appropriate exponents. Use parentheses to NixMn1-x.
Be aware of the different meanings of the homophones
avoid ambiguities in denominators. Punctuate equations
affect (usually a verb) and effect (usually a noun),
when they are part of a sentence, as in
complement and compliment, discreet and
r2
discrete, principal (e.g., principal investigator) and
0 F ( r, ) dr d [ r2 / (2 0 )]
principle (e.g., principle of measurement). Do not

confuse imply and infer.

exp( | z j zi | ) 1 J 1 ( r2 ) J 0 ( ri ) d . Prefixes such as non, sub, micro, multi, and

0
(1) "ultra are not independent words; they should be joined to
the words they modify, usually without a hyphen. There is
no period after the et in the Latin abbreviation et al. (it
Be sure that the symbols in your equation have been
defined before the equation appears or immediately is also italicized). The abbreviation i.e., means that is,
following. Italicize symbols (T might refer to temperature, and the abbreviation e.g., means for example (these
but T is the unit tesla). Refer to (1), not Eq. (1) or abbreviations are not italicized).
An excellent style manual and source of information for
equation (1), except at the beginning of a sentence:
science
writers is [9].
Equation (1) is ... .
E. Other Recommendations
Use one space after periods and colons. Hyphenate
complex modifiers: zero-field-cooled magnetization.
Avoid dangling participles, such as, Using (1), the
potential was calculated. [It is not clear who or what used
(1).] Write instead, The potential was calculated by using
(1), or Using (1), we calculated the potential.
Use a zero before decimal points: 0.25, not .25. Use
cm3, not cc. Indicate sample dimensions as 0.1 cm
0.2 cm, not 0.1 0.2 cm2. The abbreviation for
seconds is s, not sec. Do not mix complete spellings
and abbreviations of units: use Wb/m 2 or webers per
square meter, not webers/m 2. When expressing a range
of values, write 7 to 9 or 7-9, not 7~9.
A parenthetical statement at the end of a sentence is
punctuated outside of the closing parenthesis (like this). (A
parenthetical sentence is punctuated within the
parentheses.) In American English, periods and commas
are within quotation marks, like this period. Other
punctuation is outside! Avoid contractions; for example,
write do not instead of dont. The serial comma is

VII. EDITORIAL POLICY

The submitting author is responsible for obtaining
agreement of all coauthors and any consent required from
sponsors before submitting a paper. It is the obligation of
the authors to cite relevant prior work.
Authors of rejected papers may revise and resubmit them
to the journal again.
VIII.PUBLICATION PRINCIPLES
The contents of the journal are peer-reviewed and
archival. The journal INTERNATIONAL JOURNAL OF
ENGINEERING AND INNOVATIVE TECHNOLOGY
(IJEIT) publishes scholarly articles of archival value as well
as tutorial expositions and critical reviews of classical
subjects and topics of current interest.
Authors should consider the following points:
1) Technical papers submitted for publication must
advance the state of knowledge and must cite relevant

prior work.
2) The length of a submitted paper should be
commensurate with the importance, or appropriate to
the complexity, of the work. For example, an obvious
extension of previously published work might not be
appropriate for publication or might be adequately
treated in just a few pages.
3) Authors must convince both peer reviewers and the
editors of the scientific and technical merit of a paper;
the standards of proof are higher when extraordinary or
unexpected results are reported.
4) Because replication is required for scientific progress,
papers submitted for publication must provide
sufficient information to allow readers to perform
similar experiments or calculations and use the
reported results. Although not everything need be
disclosed, a paper must contain new, useable, and fully
described information. For example, a specimen's
chemical composition need not be reported if the main
purpose of a paper is to introduce a new measurement
technique. Authors should expect to be challenged by
reviewers if the results are not supported by adequate
data and critical details.
IX. CONCLUSION
A conclusion section is not required. Although a
conclusion may review the main points of the paper, do not
replicate the abstract as the conclusion. A conclusion might
elaborate on the importance of the work or suggest
applications and extensions.
singular
heading even if you have many
acknowledgments. Avoid expressions such as One of us
(S.B.A.) would like to thank ... . Instead, write F. A.
Author thanks ... . Sponsor and financial support
acknowledgments are placed in the unnumbered
footnote on the first page.

REFERENCES
[1] S. Chen, B. Mulgrew, and P. M. Grant, A clustering
technique for digital communications channel equalization
using radial basis function networks, IEEE Trans. on Neural
Networks, vol. 4, pp. 570-578, July 1993.
[2] J. U. Duncombe, Infrared navigationPart I: An assessment
of feasibility, IEEE Trans. Electron Devices, vol. ED-11, pp.
34-39, Jan. 1959.
[3] C. Y. Lin, M. Wu, J. A. Bloom, I. J. Cox, and M. Miller,
Rotation, scale, and translation resilient public
watermarking for images, IEEE Trans. Image Process., vol.
10, no. 5, pp. 767-782, May 2001.