TECNICOATER S SERIE
COATING &
LAMINATING LINES
Headquarter and production plants
Headquarter
Coating division
Work shop
TECNICHAL OFFICE
Technical Dept is provided with
modern and efficient equipment
which represents the heart of
the company. Over the time,
the Technical dept has
developed and widened thanks
to the sources that the company
has put at its disposal to
promote the growth: new
workstations more and more
updated, refresher courses with
companies and suppliers
working in the same field.
PRODUCING CYCLE
CONTROL
Data processing system with
line connection of all company
depts by means of common and
specific software, assuring the
hole managing and producing
cycle control.
QUALITY CONTROL CENTER
The quality control system
checks carefully all the
components and a lot of
mechanical parts coming from
external workshops. The
constructor itself assures the
accuracy to the constructive
drawing with a dedicated
certificate for the other parts.
ASSEMBLY AND TRIALS
All works of assembly and
equipping of the electric,
pneumatic, oleo dynamic, ect
systems are done by highly
qualified technicians. When the
job is finished it will be at
Customer Assistance Service
charge who will take care of the
test run and delivery .
COATING
SOLVENT BASED COATING LINES
Products
BOPP tapes
PVC tapes
Mono-adhesive tapes
(PET, OPP..)
Masking tapes
Electrical tapes
Double side tapes
(foam, nonwoven, film)
Special products
Coating and laminating lines
Suitable to handle :
Solvent based rubber pressure sensitive adhesive, generally coated at 25-38% solid.
Adhesive is formulated and personalized in users mixing department.
Solvent based acrylic pressure sensitive adhesive, formulated and personalized in users mixing department.
Primer / Release solvent based solutions if required on product application.
water based adhesives : with additional coating unit to produce in both technologies.
High quality and reliable machines and equipment
Studied to respect safety rules and to reduce energy consumptions.
Tecnimask 1000 : coating line dedicated to Masking tapes productions
Tecnicoater SW1000 : combi coating- laminating line to produce in solvent and water based adhesives
Tecnicoater S2000 : high productivity coating- laminating line for Carton Sealing, Masking, Double side, Laminated tapes.
Main standard characteristics
No-stop type or
Automatic Duplex Unwinders
9 Reels holding an locking by means of
pneumatic shafts or shaftless
9 Automatic changeover and splice
9 Automatic tension control
9 Automatic web edge guide
Primer / Release coating and drying
9 Rotogravure system with closed chamber
doctor blade or Mayer bar coating unit
9 Primer / Release feeding and recycle
system with tank and pump
9 Vertical or horizontal drying ovens with
independent thermal blower modules
Adhesive coating unit
9 Inlet driven pull unit
9 Coating head: Rotating knife type, with Knife and
applicator rolls, parallel or overlapped arranged,
prearranged for automatic correction
Anti-adhesive surface treatment
9 Rotating knife
9 Micrometric adjustment of adhesive thickness
9 Coating width fast adjustment system
9 Vacuum driven pull unit in exit
Adhesive drying tunnel
9 High efficiency horizontal ovens, shall or vertical
pneumatic opening type; film conveyance by means of
driven rolls
9 Thermal blower modules:
- each module can be dedicated to 1 or 2 ovens sections
- air heating with thermal oil (or steam) batteries,
or gas burner placed in vein of air
For coating unit inside frames and after coating
web contact rolls. Eventually for nozzles and
rolls inside adhesive drying ovens.
Automatic Rewinders
9 Duplex type, with lay on roll and minimum gap
or Independent arms type for NO waste
during changeover
9 Additional in line Log Winder to obtain logs
with the requested lenghts (max 400 mm)
All equipment and devices for the
good control of the web
Adhesive cooling tunnel
Horizontal oven with air cooled by water-air exchander
( Spreader rolls, antistatic devices, tension
control devices, automatic web edge guides ..)
Equipment and devices for solvent prevention
General pushbutton control desk
Insulating cabinets
LEL monitoring systems (I.R. or Flame Temp. Analyzer type)
Draw and cooling unit with water cooled cilinders
Electric cabinet, cables, connections
AC motors + vector drives
with high capacity thermal exchange
PLC with Teleservice system
9 Heat exchangers for energy recovery
9 High temperature curing ovens
9 Humidification system
9 Secondary unwinder with lamination gruop
9 Delaminating group with simplex or duplex type
Liner rewinder
9 Web pre-conditioning groups:
heated calanders or I.R. plates
9 Web cleaning treater
9 Web Surface inspection and monitoring system
9 Web weight measuring system:
9 Dynamic / static mixers for adhesive crosslinking agents
9 Water refrigerating system
9 Evaporation tower
9 Process heat exchangers
9 Thermal station
9 Solvent recovery plant with activated carbon for
each type of solvent
9 Primer/ Release preparation systems
9 Air compressors
9 Know-how:, product adjustment
and stabilization
Fittings and options
Coating lines can be equipped with:
9 Reels loading - unloading systems
9 Film stretching calanders group
9 Corona treatment stations
9 Other type of applicable adhesive coating
heads: Mayer bar, reverse roll, direct
comma roll system and other systems to
realize special coatings or to coat different
adhesive too (water based)
9 Horizontal ovens with driven conveyor belts
Turn key coating plant
Services, equipment and plants
supplied upon request:
9 Adhesive preparation plant:
- rubber bale lifting, storage and granulation
plant
- rubber-resins-solvent mixers and dissolvers
(or Bambury mixer)
- adhesive storage tanks
- pigmentation system with static mixer
- delivery pumps and filters
total basis weight type or differential
synchronized measuring type, with
eventually automatic adjustment of the
coating die
9 Supervision system with industrial PC
for all process and production control
9 Engineering: production area
general lay-out, supervision on
general project, optimization of
energy resources inside the
productive process
Example:
production plant with Solvent based coating line
SOLVENT BASED COATING LINES
TECNICOATER S1000
Automatic unwinder
Stretching
calanders unit
Mod. 80-46
Release
preparation mixer
Medium-high output capacity coating lines mainly designed to produce Carton Sealing Tapes &
Masking tape.
Basic line can be integrated or modified with the insertion of other machines and devices to permit
other productions like Double side adhesive tapes and Laminated
Main characteristics
Adhesive coating unit with direct rotating knife.
Release Primer coating and drying units.
Adhesive drying and cooling horizontal ovens with driven rolls.
Possible installation of secondary unwinder with laminating equipment or additional water based
adhesive coating unit to produce in 2 technologies.
- Speed :
- Web Width :
Direct Rotating knife
coating unit Mod. 57-15
up to 250 mpm (BOPP)
up to 2100 mm
TECNIMASK 1000
Drying system
with air thermal blowers
Air exhausting and heat
recovery plant
Coating line designed to produce Masking tapes.
Main characteristics
Coating head with direct rotating knife.
High temperature air drying ovens.
- Speed:
up to 200 mpm
- Web Width :
up to 1800 mm
TECNICOATER S2000
Stretching calanders
unit Mod. 80-66
High quality and productivity coating lines mainly designed to produce Carton Sealing Tapes &
Masking tape, but also Double side adhesive tapes and Laminated.
Primer drying section
Main characteristics
Adhesive coating unit with direct rotating knife.
Release Primer coating and drying units.
Adhesive drying and cooling horizontal ovens with driven rolls.
Possible installation of secondary unwinder with laminating equipment or additional water based adhesive coating
unit to produce in 2 technologies.
- Speed:
- Web Width:
up to 400 mpm (BOPP)
1200 to 2100 mm
TECNICOATER S-M
Doctor nip-fed
coating unit Mod. 57-25
Coating-laminating lines allow very high production flexibility, mainly designed to produce Double
side, Laminated & Mono-adhesive tapes for special applications, with direct or transfer
coating and with or without liner recovery.
Main characteristics
Adhesive coating units with direct rotating knife and/or direct-indirect comma roll system
Adhesive drying and cooling horizontal ovens with driven rolls.
Secondary unwinder with laminating equipment and delaminating group with Liner rewinder
Eventually additional water based adhesive coating unit, to produce in 2 technologies, and Release Primer
coating and drying units, to extend the product range.
- Speed :
- Web Width :
up to 300 mpm
up to 2100 mm
Adhesive feeding pipes
Lline configuration with unwinders coupled to web accumulators and special head to head joint tables
Lline configuration with automatic unwinders and double solvent based coating unit
Adhesive drying tunnel
in complete vertical opening
COATING and LAMINATING LINES
studied to obtain
high quality final products
by respecting safety,
by cutting the productive costs to the highest,
by reducing wastes and downtimes,
by optimizing energy and human resources.
Via Matteotti, 9
22078
Turate (CO)
ITALY
Tel:
Fax:
E-mail:
Web site:
+39 02 96750432
+39 02 96750088
guzzetti@guzzettigroup.com
www.guzzetti.com
