COMPONENT MAINTENANCE MANUAL
PART NUMBER 485943-1
COMPONENT MAINTENANCE MANUAL
WITH
ILLUSTRATED PART LIST
OIL PUMP
PART NUMBER 485943-1
Revision: 0
Date: 09/10/2016
79-20-01
T-1
SEP/10/2016
COMPONENT MAINTENANCE MANUAL
PART NUMBER 485943-1
Copyright 2016 VERITECDOCS
The information contained in this document is COMPANY NAME proprietary
information. It is disclosed in confidence and is intended for internal use
only by COMPANY NAME authorized owner/lessee operators and repair
stations. It is the property of COMPANY NAME and shall not be altered,
reused, disclosed to others or reproduced for distribution or redistribution in
any form, paper or electronic, without the express written consent of COMPANY NAME. This includes but is not limited to its use in the creation,
manufacture, development, or derivation of any repairs, modifications,
spare parts, design, or configuration changes or to obtain FAA or any other
government or regulatory approval to do so. If consent is given for reproduction in whole or part, this notice shall appear in any such reproduction
in whole. COMPANY NAME assumes no liability whatsoever, whether contractual, warranty, tort or otherwise, for unauthorized alteration or alterations not performed in accordance with COMPANY NAME approved
procedures.
Revision: 0
Date: 09/10/2016
79-20-01
T-1
SEP/10/2016
COMPONENT MAINTENANCE MANUAL
PART NUMBER 485943-1
Table ROR-1: RECORD OF REVISIONS
REV.
NO.
ISSUE
DATE
Revision: 0
Date: 09/10/2016
INSERTED
DATE
BY
REV.
NO.
ISSUE
DATE
INSERTED
DATE
79-20-01
BY
ROR-1
SEP/10/2016
COMPONENT MAINTENANCE MANUAL
PART NUMBER 485943-1
Table RTR-1: RECORD OF TEMPORARY REVISIONS
TEMP REV
Revision: 0
Date: 09/11/2016
PAGE
NUMBER
ISSUE DATE
BY
DATE
REMOVED
79-20-01
BY
ROTR-1
SEP/11/2016
COMPONENT MAINTENANCE MANUAL
PART NUMBER 485943-1
Table SBL- 1: SERVICE BULLETIN LIST
INSERTION
SERVICE BULLETIN NUMBER
MODIFICATION
DATE
Revision: 0
Date: 09/11/2016
79-20-01
BY
SBL-1
SEP/11/2016
COMPONENT MAINTENANCE MANUAL
PART NUMBER 485943-1
Table LEP- 1: LIST OF EFECTIVE PAGES
SUBJECT
PAGE
DATE
TITLE PAGE
PAGE
DATE
TESTING AND FAULT ISOLATION
TITLE 1
100X
TITLE 2
100Y
RECORD OF REVISIONS
SCHEMATIC AND WIRING DIAGRAMS
ROR 1
200X
ROR 2
200Y
RECORD OF TEMPORARY REVISIONS
DISASSEMBLY
ROTR 1
300X
ROTR2
300Y
SERVICE BULLETIN LIST
CLEANING
SBL 1
400X
SBL 2
400Y
LIST OF EFFECTIVE PAGES
CHECK
LEP 1
500X
LEP 2
500Y
TABLE OF CONTENTS
REPAIR
TOC 1
600X
TOC 2
600Y
INTRODUCTION
Revision: 0
Date: 09/11/2016
SUBJECT
ASSEMBLY
INTRO 1
700X
INTRO 2
700Y
79-20-01
LEP-1
SEP/11/2016
COMPONENT MAINTENANCE MANUAL
PART NUMBER 485943-1
Table LEP- 1: LIST OF EFECTIVE PAGES
SUBJECT
PAGE
DATE
DESCRIPTION AND OPERATION
SUBJECT
PAGE
FITS AND CLEARANCES
800X
800Y
SPECIAL TOOLS, FIXTURES, EQUIPMENT
AND CONSUMABLES
INSTALLATION
900X
1300X
900Y
1300Y
ILLUSTRATED PARTS LIST
SERVICING
IPL-TP
1000X
1400X
IPL-TP
1000Y
1400Y
INTRODUCTION
STORAGE INCLUDING TRANSPORTATION
INTRO
1000X
1500X
INTRO
1000Y
1500Y
INTRO
1000Z
NUMERICAL INDEX
DATE
REWORK
NI
1000X
1600X
NI
1000Y
1600Y
DETAIL PART LIST
DPL
1000X
DPL
1000Y
SPECIAL PROCEDURES
1100X
1100Y
Revision: 0
Date: 09/11/2016
79-20-01
LEP-2
SEP/11/2016
COMPONENT MAINTENANCE MANUAL
PART NUMBER 485943-1
Table LEP- 1: LIST OF EFECTIVE PAGES
SUBJECT
REMOVAL
PAGE
DATE
SUBJECT
PAGE
DATE
1200X
1200Y
Revision: 0
Date: 09/11/2016
79-20-01
LEP-3
SEP/11/2016
COMPONENT MAINTENANCE MANUAL
PART NUMBER 485943-1
Table 1: TABLE OF CONTENTS
INTRODUCTION
INTRO X
1. GENERAL
2. PRODUCT SUPPORT
3. MANUAL LAYOUT
4. REVISION SERVICE
5. SHOP VERIFICATION
6. WARNINGS, CAUTION, NOTES
7. LIST OF ABBREVIATIONS
DESCRIPTION AND OPERATION
1. GENERAL
2. DESCRIPTION AND OPERATION
TESTING AND FAULT ISOLATION
1001
1. GENERAL
2. PREPARATION FOR THE TEST
3. TESTING
SCHEMATICS AND WIRING DIAGRAMS
200X
1. GENERAL
2. SCHEMATICS AND WIRINGS
DISASSEMBLY
300X
CLEANING
400X
1. GENERAL
2. LIST OF MATERIALS
3. PROCEDURE
CHECK
500X
1.GENERAL
2. LIST OF EQUIPMENT
3. PROCEDURE
Revision: 0
Date: 09/11/2016
79-20-01
PAGE 1
SEP/11/2016
COMPONENT MAINTENANCE MANUAL
PART NUMBER 485943-1
Table 1: TABLE OF CONTENTS
REPAIR
600X
ASSEMBLY
700X
FITS AND CLEARANCES
800X
SPECIAL TOOLS, FIXTURES, EQUIPMENT
AND CONSUMABLES
900X
1. LIST OF MATERIALS
ILLUSTRATED PARTS LIST
IPL-TP 1000X
INTRODUCTION
INTRO 1000X
1. IPL INTRODUCTION
INTRO 1000X
2. LIST OF VENDORS
INTRO 1000X
NUMERICAL INDEX
NI 1000X
DETAILED PART LIST
DPL 1000X
FIGURE #
1000X
SPECIAL PROCEDURES
1100X
REMOVAL
1200X
INSTALLATION
1300X
SERVICING
1400X
STORAGE INCLUDING TRANSPORTATION
1500X
1. GENERAL
2. PROCEDURE
REWORK
Revision: 0
Date: 09/11/2016
1600X
79-20-01
PAGE 2
SEP/11/2016
COMPONENT MAINTENANCE MANUAL
PART NUMBER 485943-1
Revision: 0
Date: 09/11/2016
79-20-01
PAGE 3
SEP/11/2016
COMPONENT MAINTENANCE MANUAL
PART NUMBER 485943-1
INTRODUCTION
TASK XX-XX-XX-XXX-XXX-XX
1. GENERAL
This manual has been written in accordance with the ATA iSpec 2200. It includes the maintenance and
repair instructions of the unit.
TASK XX-XX-XX-XXX-XXX-XX
2. PRODUCT SUPPORT
The NAME OF COMPONENT is a product supported by:
VERITECDOCS S de RL de C.V.
2244 Tintero
Mexicali, B.C, ZIP 21297
COUNTRY
CAGE: 99193
Tel: XXX-XXX-XXXX
E-mail: company@company.com
TASK XX-XX-XX-XXX-XXX-XX
3. MANUAL LAYOUT
You will find the sections that follow in this manual:
- Description and Operation
- Testing and Fault Isolation
- Wiring Diagrams
- Disassembly
- Cleaning
- Check
- Repair
- Assembly
- Fits and clearances
- Special Tools, Fixtures and Equipment
- Illustrated Parts List
- Special Procedures
- Removal
- Installation
- Servicing
- Storage (incl. Transportation)
- Rework
TASK XX-XX-XX-XXX-XXX-XX
4. REVISION SERVICE
This manual will be changed as necessary by revisions because of Service Bulletins for example
Revision: 0
Date: 09/10/2016
79-20-01
INTRO 1
SEP/10/2016
COMPONENT MAINTENANCE MANUAL
PART NUMBER 485943-1
TASK XX-XX-XX-XXX-XXX-XX
5. SHOP VERIFICATION
The sections within this manual are approved. The applicable tasks of disassembly, testing and assembly were
done at Company Name.
TASK XX-XX-XX-XXX-XXX-XX
6. WARNINGS, CAUTIONS, NOTES
A. WARNING
Warnings give instructions to the use of materials, processes, methods, procedures or limits. Obey the instructions accurately, if not, this can cause injury or death of persons.
B.CAUTION
Cautions give instructions to the use of materials, processes, methods, procedures or limits. Obey the instructions accurately, if not, this can cause damage to the equipment.
C.NOTE
Notes give instructions which make the job easier.
7. LIST OF ABBREVIATIONS
ATA
AIR TRANSPORT ASSOCIATION OF AMERICA
C CELSIUS
DC DIRECT CURRENT
hPa HECTO PASCAL
in. INCH
IPL ILLUSTRATED PARTS LIST
lb. POUND
mA MILLIAMPERE
mm MILLIMETER
R REVISED
RF REFERENCE
Revision: 0
Date: 09/10/2016
79-20-01
INTRO 2
SEP/10/2016
FIGURE 1COMPONENT MAINTENANCE MANUAL
PART NUMBER 485943-1
DESCRIPTION AND OPERATION
TASK XX-XX-XX-XXX-XXX-XX
1. GENERAL
The OIL PUMP is part of the Oil system of the A/C. Refer to (FIGURE 1) for a view of the OIL PUMP.
TASK XX-XX-XX-XXX-XXX-XX
2. DESCRIPTION AND OPERATION
A.Description:
(1) The oil pump has the capability to create a 25 PSIG pressure to move oil at the aircraft system
in order to make oil circulate in the system properly.
Table 1: TECHNICAL DATA
Dimensions
Weight
20 lb
Operating Voltage
24V
Operating Current
1.5A
TECHNICAL DATA
B. OPERATION
(1) The oil pump requires an application of 24 V at 1.5 A in order to move the actuation part to generate a constant pressure of 25 PSIG.
Revision: 0
Date: 09/10/2016
79-20-01
PAGE 1
SEP/10/2016
FIGURE 1COMPONENT MAINTENANCE MANUAL
PART NUMBER 485943-1
FIGURE 1. OIL PUMP
Revision: 0
Date: 09/10/2016
79-20-01
PAGE 2
SEP/10/2016
COMPONENT MAINTENANCE MANUAL
PART NUMBER 485943-1
TEST AND FAULT ISOLATION
TASK XX-XX-XX-XXX-XXX-XX
1. GENERAL
A. this section gives procedures for testing the NAME OF COMPONENT.
B. Unit testing is required if a unit is received from the line maintenance personnel with no definite fault
localization or after unit repair.
C. For internal wiring and pin designation of the unit refer to (FIGURE 1001)
TASK XX-XX-XX-XXX-XXX-XX
2. PREPARATION FOR THE TEST
A. Test conditions:
Carry out testing and fault isolation at ambient room conditions:
Table 1001: TEST CONDITIONS
Temperature
25 C
Atmospheric Pressure
100 kPa
Relative Humidity
B. Test Equipment and Materials
Table 1002: TEST EQUIPMENT AND MATERIALS
Description
Source
Equipment 1
Vendor
Equipement 2
Vendor
Revision: 0
Date: 09/10/2016
79-20-01
PAGE 1001
SEP/10/2016
COMPONENT MAINTENANCE MANUAL
PART NUMBER 485943-1
TASK XX-XX-XX-XXX-XXX-XX
3. TESTING
A. For test procedure refer to Table 100X:
Table 1003: TEST PROCEDURE
Step/Procedure
Set Value
Required Value
1. Test 1
Step description
2. Test 2
Step description
3. Test 3
Step description
Revision: 0
Date: 09/10/2016
79-20-01
PAGE 1002
SEP/10/2016
COMPONENT MAINTENANCE MANUAL
PART NUMBER 485943-1
DISASSEMBLY
TASK XX-XX-XX-XXX-XXX-XX
1. GENERAL
A. this section gives procedures for disassembly of the Oil Pump.
B. Unit disassembly is required if a unit is received from the field for repair.
TASK XX-XX-XX-XXX-XXX-XX
2. PREPARATION FOR THE TEST
A. Test conditions:
Carry out testing and fault isolation at ambient room conditions:
Table 1001: TEST CONDITIONS
Temperature
25 C
Atmospheric Pressure
100 kPa
Relative Humidity
B. Test Equipment and Materials
Table 1002: TEST EQUIPMENT AND MATERIALS
Description
Source
Equipment 1
Vendor
Equipement 2
Vendor
TASK XX-XX-XX-XXX-XXX-XX
3. TESTING
A. For test procedure refer to Table 1003:
Revision: 0
Date: 09/10/2016
79-20-01
PAGE 3001
SEP/10/2016
COMPONENT MAINTENANCE MANUAL
PART NUMBER 485943-1
Table 1003: TEST PROCEDURE
Step/Procedure
Set Value
Required Value
1. Test 1
Step description
2. Test 2
Step description
3. Test 3
Step description
Revision: 0
Date: 09/10/2016
79-20-01
PAGE 3002
SEP/10/2016
