00-7 Transmission Layout
Uploaded by
mefisto06c00-7 Transmission Layout
Uploaded by
mefisto06cTransmission layout
Page 1 of 3
00-7
Transmission layout
1 - Engine
2 - Clutch
3 - Transmission
4 - Input shaft (main shaft)
5 - Front differential
6 - Front drive pinion (output shaft)
7 - Hollow shaft
8 - Torsen differential
9 - Driveshaft
10 - Rear drive pinion
11 - Rear differential
Note:
Arrows point in forward direction of travel.
http://127.0.0.1:8080/audi/servlet/Display?action=Goto&type=repair&id=AUDI.B5.TM03.00.3
11/19/2002
Transmission layout
Page 2 of 3
00-8
I - 1st gear
II - 2nd gear
IlI - 3rd gear
IV - 4th gear
V - 5th gear
VI - 6th gear
R - Reverse gear
A1 - Front final drive
A2 - Rear final drive
T - Speedometer drive, electronic
Note:
Arrows point in forward direction of travel.
http://127.0.0.1:8080/audi/servlet/Display?action=Goto&type=repair&id=AUDI.B5.TM03.00.3
11/19/2002
Transmission layout
Page 3 of 3
00-9
Notes for performance test, brake test
and tow starting/towing
Performance test on roller type test stand
The following must be noted when a vehicle with
all wheel drive is to be driven onto a performance
test stand:
A four wheel test stand with four braked rollers
must be used.
Brake test on the roller type test stand
The following must be noted when a vehicle with
all wheel drive is to be driven onto a roller type
test stand:
A slow moving brake test stand (to 5,5 km/h)
must be used. During this, no gear may be
selected.
Tow starting and towing vehicles
Repair Manual, Maintenance
http://127.0.0.1:8080/audi/servlet/Display?action=Goto&type=repair&id=AUDI.B5.TM03.00.3
11/19/2002