GEORGE CLOTHING QA TECHNICAL DATA FORM
Pg 1 of 1
Manufacturer :
Style No :
ANANTA SPORTS WEAR LTD
BT.W.CT.TR.11-OP-2
Wash Instructions : ENZYME WASH
Fibre Comp. :
100% Cotton Poplin
Supplier No :
30085
Packaging :
H/P
Fire Warning :
Process No :
N/A
Design Sample
White Sample
Description: White Crop Womens Short
Season :
A/W11
Sample Size 3-4"YRS
LC No :
N/A
BLOCK
N/A
Barcode No :N/A
Ident No :
N/A
Black Seal
Gold Seal
Production Sample
SUPPLIER: Comments and action required :
FABRIC DETAIL: 100% Cotton Poplin
Developmenrt SAMPLE SUBMION DATE :10-21-2010
SIZE OF GARMENT
3-4"YRS
TOL + / -
Waist Half Elasticated (Elastic)Bottoms
25.00
ok
Waist Extended
31.00
ok
1. FABRIC - AVAILABLE
Hip Position From Crotch Seam (Bottoms)
6.00
ok
2. STITCHING - AVAILABLE
Hip from Crotch Seam(Bottoms)
33.00
1.50
Thigh At Crotch
20.50
0.50
Front Rise
21.00
-0.50
Back Rise
26.00
-0.50
Outside Leg-Waist To Hem at Ankle
58.00
58.00
Hem/Sweep At Ankle(Bottoms)
18.00
18.00
Waistband Depth
3.50
3.50
Approved
Rejected
Re-submit new sample
Proceed to seals
Proceed to Gold Seal
Proceed to production
3. BTN- AVAILABLE
Buyer : Julie Kinghorn
Tech
nolo
gist :
Date:
Co. Techno.
Date:
Date:
Price :
TBC
SUGGESTED SPEC
GEORGE CLOTHING
SIZE SPECIFICATION
GIRLSWEAR BOTTOMS
(TROUSERS, SHORTS & SKIRTS) 1-
5YRS
COMPANY & FACTORY
ANANTA SPORTS WEAR LTD.
RANGE
A/W11
SIZE RANGE
5-6 YRS
REF NO.
SARA BTG DEV-01( OP-B)
FABRIC
100% Cotton TWILL
BLOCK/BASIS
AGES
6-9 mths 9-12 mths
HEIGHT
POINT
1-1
1-2
2-3
80-86cm
86-92cm
92-98cm
3-4
4-5
5-6
TOL + / -
98-104cm 104-110cm 110-116cm TOL + / -
AREAS OF MEASUREMENT
HALF CIRCUMFERENCE MEASUREMENTS
B2
WAIST RELAXED
20.0
21.0
22.0
23.0
24.0
24.5
33.5
34.5
1.0
WAIST STRETCHED
28.0
29.0
30.0
31.0
32.0
32.5
31.0
32.0
1.0
C6
HIP
28.0
29.0
30.0
31.0
32.0
32.5
34.0
44.0
1.0
M1
THIGH
17.5
18.0
18.5
19.0
19.5
20.0
37.0
38.0
0.5
RISES & FLY OPENING
O1
FRONT RISE
18.00
18.25
18.5
19.0
19.5
19.5
37.0
20.5
0.5
O2
BK RISE
23.50
23.75
24.0
24.5
25.0
25.0
9.0
26.0
0.5
E9
FLY OPENING
7.5
7.5
8.0
8.5
8.5
9.0
9.5
9.5
0.0
18.5
19.0
19.5
20.0
-0.5
0.0
0.5
57.5
58.0
58.5
59.0
-0.5
0.0
0.5
LEG SHAPE FOR SHORTS ONLY
D1
HEM WIDTG-SHORTS ONLY
17.5
E6
OUTSIDE LENGTH FROM H P S TO BTM
56.5
18.0
E6
FRONT PKT LENGTH
-2.0
-2.0
-2.0
-2.0
-2.0
6.0
-2.0
57.0
1.0
LEG SHAPE FOR TROUSER ONLY
M2
KNEE WIDTH
14.0
14.5
15.0
15.5
16.0
16.5
17.0
17.5
0.5
D1
HEM WIDTG -TROUSERS
14.0
14.5
15.0
15.5
16.0
16.5
17.0
20.5
0.5
E6
OUTSIDE LEG SEAM-STANDERD LENGTH
39.0
42.0
45.0
49.0
53.0
58.0
63.0
68.0
1.0
-10.0
-8.0
-6.0
-3.0
0.0
4.0
8.0
0.0
1.0
E6
SKIRT SHAPES
E1
-1.0
-1.0
-1.0
-1.0
-2.0
18.0
-2.0
1.0
E1
HEM WIDTH-SKIRTS
-3.0
-3.0
-3.0
-3.0
-4.0
41.0
-4.0
1.0
D1
FRONT BIB BTM
-1.0
-1.0
-1.0
-1.0
-1.0
27.0
-1.0
1.0
BK PKT LENGTH AT CENTER
9.0
37.0
BK PKT WIDTH AT TOP
8.5
20.0
BK PKT POSITION FROM C/B
3.0
25.5
BK PKT POSITION FROM TOP OF W/B
9.0
9.0
FRONT PKT OPEN AT W/S
5.5
-0.5
FRONT PKT OPEN AT S/S
5.0
0.0
BK YOUK AT C/B
5.0
8.5
BK YOUK AT S/S
2.5
WAIST RIB HIGHT
4.0
HEM HIGHT
1.5
ADDITIONAL
7.5
5.5
SIGNED WHEN APPROVED BY GEORGE
TECHNOLOGIST:
SIGNED WHEN APPROVED BY SUPPLIER:
DATE:
DATE:
GOLD SEAL SUBMISSION FORM.
SUPPLIER
ANANTA SPORTSWEAR LTD
IDENT:
DEV-01, OP-B
DESCRIPTION
GEDP PACK REF:
RIB WAIST DENIM
COMPOSITION:
CARE INSTRUCTIONS
COMMENTS
PROMOTIONAL
SWINGERS
N/A
TEST REPORT REF
TEST REP0RT DATE
FAILURE /
COMMENTS
PRODUCT MEASURES
TO SPEC
COMPLETED
SPECIFICATION
SUBMITTED
COMMENTS
SUPPLIER SIGNITURE SHIBLY / MANOJ
DATE:
COLOUR:
As a supplier to George it is your responsibility to ensure the above is fully completed for ALL the requested
information, failure to complete the form will result in Gold seal rejection and Non acceptance of bulk delivery.
CHILDRENSWEAR RISK ASSESSMENT
Risk Assessment must be completed by the Garment Manufacturer. If any areas do not comply, then the form to be sent in with the
garment for 1st Fit Meeting and discussed with Technical Representative.
RIB WAIST DENIM
Department
882 BT GIRLS
George technologist
JACQUI BREWIN
Garment manufacturer
ANANTA SPORTS WEAR LTD
PHOTO
Fabric/trim manufacturer
N/A
Design/style description
Does not
comply
DEV-01, OP-B
Comply
Design/style ref
Comments
Fabric Manual - Section 2: Legal requirements and prohibited chemicals
Fibre Composition
Ensure all fabrics are tested for Fibre
Composition and labelling applicable
Surface Flash pile and fur fabrics and trims
Do any of the components need testing for
Surface Flash?
Formaldehyde/
36 months and under (including BT) ensure
all components meet Free Formaldehyde requirement of <20ppm
36 months and over ensure all components
Y
meet Free Formaldehyde testing requirement of <75 ppm
Bedding and sleeping bags must be tested
for Released Formaldehyde
Nickel Directive
Are any of the trims metal with prolonged contact with
the skin?
Phthalates
Could phthalates be found in any of the components?
Banned Azo Dyes
Banned Azo dyes must not be present in any of the
components
Cadmium
Ensure no cadmium is present on any trims or
components - plastic, paints, plastisol prints, PVC & PU fabrics
APEOS /
Ensure AP & APEOs are not present in any pigment printed
components or plastics
Safety - Ensure the garment and all components comply with the relevant sections
Nightwear Safety Section 22/
Ensure the garment conforms to UK Nightwear
(Safety) Regulations
The whole garment must be tested.
Y
Ensure all pyjamas and bathrobes are tested to EN 14878
EN71
Does the garment require testing to EN71?
Is
there any play value
Attachment Strengths
All relevant components must pass a pull test at 90N
This
includes fabric tabs, buttons, poppers, bows etc.
Section 7 - Metal Fasteners
Section 8 - Zip Fasteners
Slide fasteners (Zips) on trousers are not to be used in
garments for 36 months and under
Zips
used on garments for under 3s must pass the torque test
Section 9 - Dungaree Clips and Sliders
Section 10 - D rings
Section 11 - Drawstrings, Cords/Ties and Sashes.
Y
No attachments on the ends of cords or drawstrings No knots
are allowed
What are the cords and drawstrings agreed lengths and where are
they situated?
Section 12 - Toggles
Section 13 - Fixed Bow
Ensure loop and tails are correct for measurements
Section 14 - Buttons /////// Buttons must not bear a resemblance to food, have no sharp points
and pass BS 4162:1983
Section 17 - Hook and Loop Fastener Tape///
Baby hook and loop tape must be used on all
newborn and baby basic products
Section 19 - Thread Ends and Float Threads
Long floats in the toe area and in the finger area must
be trimmed away.
Long floats on other areas of garments must be no longer than 1cm.
Section 20 - Sequins, Beads, Jewels, Studs and Diamantes
Ensure all relevant pull tests and durabilitys
have been performed.
Sequins, beads and similar components are not to be hand sewn or chain stitched on garments
for children under 3 years.
Section 21 Miscellaneous
No hoods allowed on newborn and baby
sleepwear. Hoods on garments for babies under 12 months are not to be made of impermeable
material due to risk of suffocation.
Newborn and BT products must not be
stonewashed
Minimum neck stretch must meet spec on Childrenswear does construction permit this?
GARMENTS MUST NOT HAVE ANY OF THE FOLLOWING RISKS
Strangulation
Entrapment
Slipping
Tripping
Induced vomiting in infants
Restricted blood circulation
Suffocating
Lacerations
Overheating
TESTING List all testing required (including any additional testing)
1. Fastness to washing
2. Fastness to rubbing
3. Fastness to water
4. Fastness to light
5. Fibre analysis
6. Dimensional stability to washing
7. Spirality
8. Bursting Strength
9. Pilling (Just can achieve grade 2~3)
COMMENTS
