Scribd
Upload
88 views6 pages

Geometris of Drawing

If a solid has a corner of its base on the horizontal plane (HP), the sides of the base containing that corner should be kept equally inclined to the vertical plane (VP). If the corner of the base is in the vertical plane (VP), the sides of the base containing that corner should be kept equally inclined to the horizontal plane (HP). The document discusses how to project solids based on the position of corners of the solid's base.

Uploaded by

Mushini Nagabhushan
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as DOC, PDF, TXT or read online on Scribd
88 views6 pages

Geometris of Drawing

If a solid has a corner of its base on the horizontal plane (HP), the sides of the base containing that corner should be kept equally inclined to the vertical plane (VP). If the corner of the base is in the vertical plane (VP), the sides of the base containing that corner should be kept equally inclined to the horizontal plane (HP). The document discusses how to project solids based on the position of corners of the solid's base.

Uploaded by

Mushini Nagabhushan
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as DOC, PDF, TXT or read online on Scribd
You are on page 1/ 6

UNIT 4 PROJECTION OF SOLIDS

If a solid has a corner of its base on the HP, the sides of the
base containing that corner should be kept equally inclined to
the VP. If the corner of the base is in the VP, the sides of the
base containing that corner should be kept equally inclined to
the HP.

You might also like