REQUEST FOR INSPECTION
RFI NO: ABIS-MECH-YR/72
Project Title :INSTALLATION OF N2 PIPING SYSTEM AT (YR) PO/Work Order :300613220
Client : SAUDI ARAMCO (YR) To Inspection Department SAUDI
MECHANICAL ELECTRICAL CIVIL OTHER
Required Inspection Date: 01 DEC 2016
Work Permit Required YES NO
Inspection Test Plan Action Number # QRD-QC-05-YR2016 / 8.1,8.3 HOLD POINT
Sr. No Inspection Detail Area / Location Inspection Approved ITP No
Time
DRY FILM THICKNESS (DFT) YANBU ARAMCO SITE / AREA
1 10:00 QRD-QC-05-YR2016
INSPECTION D
INSPECTED BY
Name
Inspection Department
SaudiAramco - Yanbu Refin
Doc.No.QRD-QC-03
Page: 1 of 1
Rev.01
Date: 06/05/2015
-MECH-YR/72
/Work Order :300613220
nspection Department SAUDI ARAMCO(YR)
Drawing No Remark
VB-104496-006
SPECTED BY
Badge #
pection Department
udiAramco - Yanbu Refinery
Date: 29/AUG/2016
PAINTING AND COATING INSPECTION
AL- BARRAK
PROJECT NAME : INSTALLATION OF N2 PIPING SYSTEM AT (YR)
CLIENT: SAUDI ARAMCO
Package No: Drawing No. Reference code Paint System
SAEP-316
VB-104495-001 SAES-H-001,
N2-VB-10495 11 NOS 12 MTS RANDOM LENGTH 6 ASTM D4285, D4417 APCS- 113A
INCHS PIPE
INSPECTIONS
AMBIENT CONDITION Blasting 1st Coat 2nd Coat 3rd Coat
10/24/2016 10/24/2016 10/25/2016 10/26/2016
DATE
7:30AM 11:00AM 9:00AM 9:00AM
TIME
43 47 46 45
STEEL TEMP. C
21 22.2 22 21.4
DEW POINT
47% 51% 50% 49%
RELATIVE HUMIDITY %
SURFACE PREPARATION
METHOD: BLASTING GRID: COPPER SLAG SIZE: 0.2-1.4 mm GRADE : SA 2 1/2
Textex Tape:
ANCHOR PROFILE : 40 - 65 micron
COATING APPLICATION
NAME OF COAT 1st Coat 2nd Coat 3rd Coat
MANUFACTURER HEMPLE'S HAMPADUR XP 87550 HEMPLE'S HAMPADUR XP 87550 HEMPLE'S HAMPADUR XP 87550
THINNER No HEMPLE'S 08450 HEMPLE'S 08450 HEMPLE'S 08450
RAL No 59700 59700 59700
BATCH No 836053069 836053069 836053069
REQUIRED DFT() 200 micron 200 micron TOTAL 600 micron
AVR DFT () 226-234 micron 431-441 micron 625-654
ALL HANDLEING AND MECHANICAL DAMAGES WILL BE REPAIRED ON SITE.
Remarks/Note :-
Coating / Painting Crew Supervisor
NAME: SERON SR 7828950 DATE: SIGNATURE:
ABIS Painting/Coating Inspector SAUDI ARAMCO
NAME:SAJITH SHANKARAN
Document reviewed Work/Rework may Proceed Test & Inspection Witnessed Qc Document Reviewed
SIGNATURE: SIGNATURE:
DATE: DATE:
QRD-QC-02 Rev-00 Dtd: 17-03-2014
Date: 15/AUG/2016
PAINTING AND COATING INSPECTION
Report No: N2-47
AL- BARRAK
PROJECT NAME : INSTALLATION OF N2 PIPING SYSTEM AT (YR)
CLIENT: SAUDI ARAMCO
Package No: Drawing No. Line No. / ISO No. Reference code Paint System
SAEP-316
VB-104493-SHT-002 3"-N-0211-3CC9P1 SAES-H-001,
N2-VB-104496 ASTM D4285, D4417 APCS- 1A
REFER ATTACHMENT
INSPECTIONS
AMBIENT CONDITION Blasting Primer 2nd Coat 3rd Coat
8/20/2016 8/20/2016 8/20/2016
DATE
8:30AM 10:30AM 3:30PM
TIME
33 39 41
STEEL TEMP. C
9 8 4
DEW POINT
35% 30% 27%
RELATIVE HUMIDITY %
SURFACE PREPARATION
METHOD: BLASTING GRID: COPPER SLAG SIZE: 0.2-1.4 mm GRADE : SA 2 1/2
Textex Tape:
ANCHOR PROFILE : 40 - 65 micron
COATING APPLICATION
NAME OF COAT Primer/1st Coat 2nd Coat 3rd Coat
MANUFACTURER
HEMPLE'S GALVOSIL ZINC PIGMENT- HEMPLE'S HAMPADUR MASTIC HEMPLE'S HAMPADUR MASTIC
15780 45881 45881
THINNER No HEMPLE'S 08700 HEMPLE'S 08700 HEMPLE'S 59700
RAL No 19840 13600 13600
BATCH No 806050570 836053069
REQUIRED DFT() 40 - 65 micron 65 -150 micron 275 - 400 micron
TOTAL DFT ACHIEVED:
AVR DFT () 70 - 90 micron 150 -170 micron
micron
Remarks/Note :-
ALL HANDLEING AND MECHANICAL DAMAGES WILL BE REPAIRED ON SITE.
Coating / Painting Crew Supervisor
NAME:SERON SR 7828950 DATE: SIGNATURE:
ABIS Painting/Coating Inspector SAUDI ARAMCO
NAME: Mohammed Irfan Amoodi
Document reviewed Work/Rework may Proceed Test & Inspection Witnessed Qc Document Reviewed
SIGNATURE: SIGNATURE:
DATE: DATE:
QRD-QC-02 Rev-00 Dtd: 17-03-2014
Date: 15/AUG/2016
PAINTING AND COATING INSPECTION
Report No: N2-47
AL- BARRAK
PROJECT NAME : INSTALLATION OF N2 PIPING SYSTEM AT YANBU ARAMCO
CLIENT: SAUDI ARAMCO
Package No. Drawing No. Line No. / ISO No. 3"/6"-N- Reference code Paint System
N2- VB- 0195-1CC9P1 SAEP-316
VB-104496 104496-SHT-006 SPL # 126- SAES-H-001,
141 ASTM D4285, D4417 APCS- 1A
INSPECTIONS
AMBIENT CONDITION Blasting Primer 2nd Coat 3rd Coat
DATE 11/29/2016
TIME 10:00AM
STEEL TEMP. C 30
DEW POINT 5
RELATIVE HUMIDITY % 20%
SURFACE PREPARATION
METHOD: BLASTING GRID: COPPER SLAG SIZE: 0.2 - 1.4 mm GRADE : SA 2 1/2
Textex Tape:
ANCHOR PROFILE : 40 - 65 micron
COATING APPLICATION
NAME OF COAT Primer/1st Coat 2nd Coat 3rd Coat
MANUFACTURER
HEMPLE'S GALVOSIL ZINC PIGMENT- HEMPLE'S HAMPADUR MASTIC HEMPLE'S HAMPADUR MASTIC
15780 45881 45881
THINNER No HEMPLE'S 08700 HEMPLE'S 08700 HEMPLE'S 59700
RAL No 19840 13600 13600
BATCH No 806050570 836053069
REQUIRED DFT() 40 - 65 micron 65 -150 micron 275 - 400 micron
DFT ACHIEVED:
AVR DFT () REPORT SIGNED REPORT SIGNED
340 - 370 micron
Remarks/Note :-
Coating / Painting Crew Supervisor
NAME: SERON SR 7828950 DATE: SIGNATURE:
ABIS Painting/Coating Inspector SAUDI ARAMCO
NAME: MOHAMMED IRFAN AMOODI
Document reviewed Work/Rework may Proceed Test & Inspection Witnessed QC Document Reviewed
SIGNATURE:
DATE: DATE:
QRD-QC-02 Rev-00 Dtd: 17-03-2014
