22151 East 91st Street PURCHASER REFERENCE: FURNACE TAG NO.

Broken Arrow,
BURNER SPECIFICATION Oklahoma 74014 USA
0 0
Phone: (918)258-8551
Fax: (918)251-5519
Adapted from API 560 / 535 Email:sales@zeeco.com REVISION: DATE: SHEET

Modified with additional Information 1 of 5

PURCHASER: 0 FURNACE TAG NO.: 0

OWNER: 0 LOCATION: 0
GENERAL INFORMATION REV

PURCHASER NAME: A
ADDRESS: A
LINE 2 A
LINE 3 A
LINE 4 A
LINE 5 A
TELEPHONE: A
FAX: A
E-MAIL ADDRESS: A
PURCHASER REFERENCE: A

OWNER NAME: A
ADDRESS OF JOBSITE: A
LINE 2 A
LINE 3 A
LINE 4 A
LINE 5 A

FURNACE TAG NUMBER: A

FURNACE TYPE: A
LOCATION OF JOBSITE:

REVISION TABLE
REV. DATE DESCRIPTION OF REVISION REV
Z
Y
X
W
V
U
T
S
R
Q
P
O
N
M
L
K
J
I
H
G
F
E
D
C
B
A

Confidential Property of Zeeco. To be returned upon request and used only in reference to contracts or proposal of this company. Reproduction of this print
or unauthorized use of this Document is prohibited.

Additional Information Required:

Note 1.1: Furnace drawings showing the mounting and locations of the burners.
Note 1.2: Exiting burner drawing with mounting details if this is retrofit application.
Note 1.3: Furnace Data Sheets with relevant burner design information.
Note 1.4: Any specifications that apply.
 PURCHASER REFERENCE: FURNACE TAG NO.
BURNER SPECIFICATION 0 0
22151 East 91st Street
Adapted from API 560 / 535 Broken Arrow, REVISION: DATE: SHEET
Oklahoma 74014 USA 2 of 5
Phone: (918)258-8551
Modified with additional Information Fax: (918)251-5519
Email:sales@zeeco.com
12/30/1899 30-Dec-99

PURCHASER: 0 JOB NUMBER: 0

OWNER: 0 LOCATION: 0
HEATER GENERAL DATA REV
FURNACE EQUIPMENT TAG NUMBER A
FURNACE SERVICE A
FURNACE MANUFACTURER A
TYPE OF FURNACE 4.6) Cabin with arch, horizontal tubes, and without convection section A
SETTING REFRACTORY THICKNESS inch A
HEATER CASING THICKNESS inch A
FIREBOX INTERIOR HEIGHT (Floor to Convection Section) feet A
FIREBOX INTERIOR LENGTH from WALL TO WALL feet A
FIREBOX WIDTH between TUBES CENTERLINE TO CENTERLINE feet A
TUBE CIRCLE DIAMETER [VERTICAL CYLINDRICAL HEATER] inch A
COMBUSTION AIR PLENUM 11.1) Individual plenum A
BURNER DATA
TYPE OF BURNER 12.1) Conventional NOx emissions technology A
BURNER PROJECT CLASSIFICATION 13.1) New furance application A
BURNER FLAME SHAPE 14.1 Round flame burner
TYPE OF FUEL(S) 15.3) Combination oil & gas
BURNER MODEL NUMBER A
QUANTITY OF BURNERS REQUIRED A
FIRING DIRECTION 18.1) Vertically upfired A
BURNER MOUNTING LOCATION 19.1) Floor A
BURNER CENTERLINE TO TUBE CENTERLINE inch A
BURNER CENTERLINE TO ADJACENT BURNER CENTERLINE inch A
BURNER CENTERLINE TO UNSHIELDED REFRACTORY inch A
BURNER CIRCLE DIAMETER [VERTICAL CYLINDRICAL HEATER] inch A
PILOT REQUIRED 24.1) Yes A
PILOT MODEL A
PILOT IGNITION METHOD 26.1) Manual ignition - {Standard} A
FLAME ROD 27.1) No - {Standard} A
PILOT FUEL 28.1) Not required A
FUEL PRESSURE at PILOT psig A
PILOT HEAT RELEASE Btu/hr A
PILOT CONNECTION 31.1) Threaded NPT - {Standard} A
PILOT IGNITION TRANSFORMER VOLTAGE 32.1) Input voltage 110 VAC @ 60 hz, single phase A
PILOT IGNITION TRANSFORMER HOUSING 33.1) Not Required A
OPERATING DATA
BURNER FUEL TYPE Gas Fired Oil Fired Off Gas A
DESIGN HEAT RELEASE per BURNER * [LHV] MMBtu/hr A
NORMAL HEAT RELEASE per BURNER * [LHV] MMBtu/hr A
MINIMUM HEAT RELEASE per BURNER * [LHV] MMBtu/hr A
OTHER CONDITION: MMBtu/hr A
OTHER CONDITION: MMBtu/hr A
BURNER TURNDOWN REQUIRED A
EXCESS AIR at DESIGN HEAT RELEASE % A
COMBUSTION AIR SOURCE 42.1) Natural draft [ND]- air only A
COMBUSTION AIR TEMPERATURE at BURNER F A
COMBUSTION AIR RELATIVE HUMIDITY % A
MAXIMUM AVAILABLE DRAFT at BURNER inch w.c. A
HEATER DRAFT TYPE 42.1) Natural draft [ND]- air only A
BURNER AIR PRESSURE DROP at DESIGN HEAT RELEASE inch w.c. A
HEATER ELEVATION ABOVE SEA LEVEL ft A
FLAME LENGTH at DESIGN HEAT RELEASE ft A
FLAME WIDTH or DIAMETER at DESIGN HEAT RELEASE inch A
FLAME WIDTH or DIAMETER at DESIGN HEAT RELEASE inch A

Confidential Property of Zeeco. To be returned upon request and used only in reference to contracts or proposal of this company. Reproduction of this print
or unauthorized use of this Document is prohibited.

Additonal Notes:
 22151 East 91st Street PURCHASER REFERENCE: FURNACE TAG NO.
BURNER SPECIFICATION Broken Arrow, 0 0
Oklahoma 74014 USA
Adapted from API 560 / 535 Phone: (918)258-8551 REVISION: DATE: SHEET
Fax: (918)251-5519 3 of 5
Email:sales@zeeco.com
Modified with additional Information
0 30-Dec-99
GAS FUEL CHARACTERISTICS REV
FUEL GAS DESIGNATION Gas Name 1 Gas Name 2 Gas Name 3 Gas Name 4 Gas Name 5 A
HEATING VALUE * [LHV] Btu/scf 0 0 0 0 0 A
HEATING VALUE * [HHV] Btu/scf 0 0 0 0 0 A
SPECIFIC GRAVITY [AIR = 1.0] 0.00 0.00 0.00 0.00 0.00 A
MOLECULAR WEIGHT 0.0 0.0 0.0 0.0 0.0 A
FUEL TEMPERATURE at BURNER F A
FUEL PRESSURE AVAILABLE at BURNER psig A
FUEL GAS COMPOSITION A
CH4 (methane) Volume% A
C2H6 (ethane) Volume% A
C3H8 (propane) Volume% A
C4H10 (butane) Volume% A
C5H12 (pentane) Volume% A
C6H14 (hexane) Volume% A
C5H10 (cyclopen) Volume% A
C6H12 (cyclohex) Volume% A
C2H4 (ethene) Volume% A
C3H6 (propene) Volume% A
C4H8 (butene) Volume% A
C5H10 (pentene) Volume% A
C4H6 Volume% A
C5H8 (isoprene) Volume% A
CO2 Volume% A
H2O Volume% A
O2 Volume% A
N2 Volume% A
SO2 Volume% A
H2S Volume% A
CO Volume% A
NH3 Volume% A
H2 Volume% A
AR Volume% A
TOTAL 0% 0% 0% 0% 0%

LIQUID FUEL CHARACTERISTICS

FUEL OIL DESIGNATION Oil Name 1 Oil Name 2 Oil Name 3 Oil Name 4 Oil Name 5
HEATING VALUE * [LHV] Btu/lb A
SPECIFIC GRAVITY A
HYDROGEN to CARBON RATIO [BY WEIGHT] A
VISCOSITY [POINT 1] at F SSU A
VISCOSITY [POINT 2] at F SSU A
API GRAVITY
DISTILLATION : ASTM INITIAL BOILING POINT F A
ASTM MID-POINT F A
ASTM END POINT F A
FUEL TEMPERATURE at BURNER F A
FUEL PRESSURE AVAILABLE at BURNER psig A
ATOMIZING MEDIUM AIR or STEAM or MECHANICAL or GAS A
ATOMIZING MEDIUM TEMPERATURE at BURNER F A
ATOMIZING MEDIUM PRESSURE at BURNER psig A
FUEL OIL METALS: Vanadium, Potassium, Sodium, Nickel wppm A
FUEL OIL COMPOSITION
Carbon (C) Weight% A
Hydrogen (H) Weight% A
Oxygen (O) Weight% A
Fixed Nitrogen (N) Weight% A
Sulfur (S) Weight% A
Ash Weight% A
Water (H2O) Weight% A
TOTAL 0.0 0.0 0.0 0.0 0.0 A

Confidential Property of Zeeco. To be returned upon request and used only in reference to contracts or proposal of this company. Reproduction of this print
or unauthorized use of this Document is prohibited.

Additional Notes:
 PURCHASER REFERENCE: FURNACE TAG NO.
BURNER SPECIFICATION 22151 East 91st Street
Broken Arrow, 0 0
Oklahoma 74014 USA
Adapted from API 560 / 535 Phone: (918)258-8551 REVISION: DATE: SHEET
Fax: (918)251-5519
Email:sales@zeeco.com 4 of 5
Modified with additional Information
0 30-Dec-99
EMISSION REQUIREMENTS REV
HEATER EQUIPMENT NUMBER 0 0 0 0 A
BURNER MODEL NUMBER 0 0 0 0 0 A
FIREBOX BRIDGEWALL TEMPERATURE F A
FIREBOX TEMPERATURE AT BURNER LOCATION F A
FIREBOX TEMPERATURE DETERMINATION MEASURED or ESTIMATED A
NOx * [LHV] lb/MMBtu A
CO * [LHV] lb/MMBtu A
UHC * [LHV] lb/MMBtu A
PARTICULATE * [LHV] lb/MMBtu A
VOC * [LHV] lb/MMBtu A
*CORRECTED TO 3% O2 [DRY BASIS at DESIGN HEAT RELEASE] A
NOISE SPECIFICATION (SOUND PRESSURE LEVEL, SINGLE BURNER) dBA at 3 ft A
SPECIFICATION OPTIONS
BURNER PLENUM A
COMMON / INTEGRAL 11.1) Individual plenum A
PLENUM SHAPE 173.1) Round A
MATERIAL 174.1) A-569/570 Carbon Steel - {Standard} A
PLATE THICKNESS 175.1) 10 gauge (2.59 mm) material - {Standard} A
INTERNAL INSULATION / THICKNESS 176.1) Not Required A
METHOD OF CONSTRUCTION 177.1) Skip welded - {Standard} A
INLET AIR CONTROL 178.1) Not required A
MODE OF OPERATION 179.1) Not Required A
SEAL STRIP CONSTRUCTION REQUIRED 180.1) Not Required [10% leakage when damper is in the full closed position] - {Standard} A
LEAKAGE % 181.1) 10% leakage when damper is in the full closed position - {standard} A
BEARINGS REQUIRED FOR DAMPERS? 182.1) Not Required - {Standard} A
BURNER TILE 183.1) Included with burner - {Standard} A
REGEN TILE COMPOSITION 184.1) Not required A
SECONDARY TILE COMPOSITION 185.1) Not Required A
NEEDLE CONSTRUCTION REQUIRED 186.1) Not Required - {standard} A
RATED SERVICE TEMP., F 187.1) 3000 deg. F A
TEMP. OF PRE-FIRING, F 188.1) 500 deg. F A
ATTENUATION METHOD 189.2) Not Required A
FUEL GAS MANIFOLD 190.1) Not Required A
TYPE OF MANIFOLD 191.1) Not Required A
METHOD OF CONSTRUCTION 192.1) Not required A
MANIFOLD MATERIAL 193.1) Not Required A
GAS TIP MATERIAL 194.1) 310 Stainless Steel or ASTM-297 HK A
GAS RISER MATERIAL 195.1) Schedule 40 Carbon Steel - {standard} A
GAS MIXER MATERIAL 196.1) Schedule 40 Carbon Steel - {standard} A
OIL TIP / ATOMIZER MATERIAL 197.1) Not Required A
WASTE GAS / PSA LANCE REQUIRED 198.1) Not Required A
FUEL GAS / PILOT GAS CONNECTIONS 199.1) Threaded NPT A
PAINTING REQUIREMENTS 200.1) Zeeco Standard A
CARBON STEEL SURFACE PREPARATION 201.5) SSPC-SP-2 // ST-2 - Hand Tool Cleaning A
PRIMER 202.1) Not Required / By Other A
PRIMER THICKNESS 203.1) Not Required / By other A
1ST PAINT COAT 204.1) Not Required / By Other A
1ST PAINT COAT THK. 205.1) Not Required / By other A
TOP COAT 206.1) Not Required / By Other A
TOP COAT THICKNESS 207.1) Not Required / By other A
BURNER MOUNTING PLATE 208.1) Not Required - {standard} A
MOUNTING TEMPLATE REQUIRED 209.1) Not Required - {standard} A
LIFTING LUGS 210.1) Not Required - {standard} A
PRESSURE TAPS REQUIRED 211.1) Not Required - {standard} A

Confidential Property of Zeeco. To be returned upon request and used only in reference to contracts or proposal of this company. Reproduction of this print
or unauthorized use of this Document is prohibited.

Additional Notes:

22151 East 91st Street

Broken Arrow,
Oklahoma 74014 USA
Phone: (918)258-8551
Fax: (918)251-5519
Email:sales@zeeco.com
 22151 East 91st Street
Broken Arrow, PURCHASER REFERENCE: FURNACE TAG NO.
BURNER SPECIFICATION Oklahoma 74014 USA
Phone: (918)258-8551 0 0
Fax: (918)251-5519
Adapted from API 560 / 535 Email:sales@zeeco.com REVISION: DATE: SHEET
5 of 5
Modified with additional Information
0 30-Dec-99
NOTES & CLARIFICATIONS REV
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
 22151 East 91st PURCHASER REFERENCE: FURNACE TAG NO.

BURNER SPECIFICATION Street

Broken Arrow,
Oklahoma 74014 USA 0 0
Phone: (918)258-8551
Adapted from API 560 / 535 Fax: (918)251-5519
Email:sales@zeeco.co
REVISION: DATE: SHEET
m 1 of 5
Modified with additional Information
PURCHASER: 0 FURNACE TAG NO.: 0

OWNER: 0 LOCATION: 0
GENERAL INFORMATION REV

PURCHASER NAME: A
ADDRESS: A
LINE 2 A
LINE 3 A
LINE 4 A
LINE 5 A
TELEPHONE: A
FAX: A
E-MAIL ADDRESS: A
PURCHASER REFERENCE: A

OWNER NAME: A
ADDRESS OF JOBSITE: A
LINE 2 A
LINE 3 A
LINE 4 A
LINE 5 A

FURNACE TAG NUMBER: A

FURNACE TYPE: A
LOCATION OF JOBSITE:

REVISION TABLE
REV. DATE DESCRIPTION OF REVISION REV
Z
Y
X
W
V
U
T
S
R
Q
P
O
N
M
L
K
J
I
H
G
F
E
D
22151 East 91st
Street C
Broken Arrow, B
Oklahoma 74014 USA
A
Phone: (918)258-8551
Fax: (918)251-5519
Confidential Property of Zeeco. To be returned upon request and used only in
Email:sales@zeeco.co reference to contracts or proposal of this company. Reproduction of this print
m
or unauthorized use of this Document is prohibited.

Additional Information Required:

Note 1.1: Furnace drawings showing the mounting and locations of the burners.
Note 1.2: Exiting burner drawing with mounting details if this is retrofit application.
Note 1.3: Furnace Data Sheets with relevant burner design information.
Note 1.4: Any specifications that apply.
 PURCHASER REFERENCE: FURNACE TAG NO.
BURNER SPECIFICATION 0 0

Adapted from API 560 / 535 REVISION: DATE: SHEET

2 of 5
Modified with additional Information
12/30/1899 30-Dec-99

PURCHASER: 0 JOB NUMBER: 0

OWNER: 0 LOCATION: 0
HEATER GENERAL DATA REV
FURNACE EQUIPMENT TAG NUMBER A
FURNACE SERVICE A
FURNACE MANUFACTURER A
TYPE OF FURNACE 4.6) Cabin with arch, horizontal tubes, and without convection section A
SETTING REFRACTORY THICKNESS mm A
HEATER CASING THICKNESS mm A
FIREBOX INTERIOR HEIGHT (Floor to Convection Section) m A
FIREBOX INTERIOR LENGTH from WALL TO WALL m A
FIREBOX WIDTH between TUBES CENTERLINE TO CENTERLINE m A
TUBE CIRCLE DIAMETER [VERTICAL CYLINDRICAL HEATER] mm A
COMBUSTION AIR PLENUM 11.1) Individual plenum A
BURNER DATA
TYPE OF BURNER 12.1) Conventional NOx emissions technology A
BURNER PROJECT CLASSIFICATION 13.1) New furance application A
BURNER FLAME SHAPE 14.1 Round flame burner
TYPE OF FUEL(S) 15.3) Combination oil & gas
BURNER MODEL NUMBER A
QUANTITY OF BURNERS REQUIRED A
FIRING DIRECTION 18.1) Vertically upfired A
BURNER MOUNTING LOCATION 19.1) Floor A
BURNER CENTERLINE TO TUBE CENTERLINE mm A
BURNER CENTERLINE TO ADJACENT BURNER CENTERLINE mm A
BURNER CENTERLINE TO UNSHIELDED REFRACTORY mm A
BURNER CIRCLE DIAMETER [VERTICAL CYLINDRICAL HEATER] mm A
PILOT REQUIRED 24.1) Yes A
PILOT MODEL A
PILOT IGNITION METHOD 22151 East 91st 26.1) Manual ignition - {Standard} A
FLAME ROD Street 27.1) No - {Standard} A
Broken Arrow,
PILOT FUEL Oklahoma 74014 USA 28.1) Not required A
FUEL PRESSURE at PILOT kg/cm2
Phone: (918)258-8551 A
Fax: (918)251-5519kcal/hr
PILOT HEAT RELEASE A
Email:sales@zeeco.co
PILOT CONNECTION m 31.1) Threaded NPT - {Standard} A
PILOT IGNITION TRANSFORMER VOLTAGE 32.1) Input voltage 110 VAC @ 60 hz, single phase A
PILOT IGNITION TRANSFORMER HOUSING 33.1) Not Required A
OPERATING DATA
BURNER FUEL TYPE Gas Fired Oil Fired Off Gas A
DESIGN HEAT RELEASE per BURNER * [LHV] MM Kcal/hr A
NORMAL HEAT RELEASE per BURNER * [LHV] MM Kcal/hr A
MINIMUM HEAT RELEASE per BURNER * [LHV] MM Kcal/hr A
OTHER CONDITION: MM Kcal/hr A
OTHER CONDITION: MM Kcal/hr A
BURNER TURNDOWN REQUIRED A
EXCESS AIR at DESIGN HEAT RELEASE % A
COMBUSTION AIR SOURCE 42.1) Natural draft [ND]- air only A
COMBUSTION AIR TEMPERATURE at BURNER deg C A
COMBUSTION AIR RELATIVE HUMIDITY % A
MAXIMUM AVAILABLE DRAFT at BURNER mm w.c. A
HEATER DRAFT TYPE 42.1) Natural draft [ND]- air only A
BURNER AIR PRESSURE DROP at DESIGN HEAT RELEASE mm w.c. A
HEATER ELEVATION ABOVE SEA LEVEL m A
FLAME LENGTH at DESIGN HEAT RELEASE mm A
FLAME WIDTH or DIAMETER at DESIGN HEAT RELEASE mm A
FLAME WIDTH or DIAMETER at DESIGN HEAT RELEASE mm A

Confidential Property of Zeeco. To be returned upon request and used only in reference to contracts or proposal of this company. Reproduction of this print
or unauthorized use of this Document is prohibited.
 PURCHASER REFERENCE: FURNACE TAG NO.
BURNER SPECIFICATION 0 0

Adapted from API 560 / 535 REVISION: DATE: SHEET

3 of 5
Modified with additional Information
0 30-Dec-99
GAS FUEL CHARACTERISTICS REV
FUEL GAS DESIGNATION Gas Name 1 Gas Name 2 Gas Name 3 Gas Name 4 Gas Name 5 A
HEATING VALUE * [LHV] Kcal/Nm3 0 0 0 0 0 A
HEATING VALUE * [HHV] Kcal/Nm3 0 0 0 0 0 A
SPECIFIC GRAVITY [AIR = 1.0] 0.00 0.00 0.00 0.00 0.00 A
MOLECULAR WEIGHT 0.0 0.0 0.0 0.0 0.0 A
FUEL TEMPERATURE at BURNER deg C A
FUEL PRESSURE AVAILABLE at BURNER kg/cm2 A
FUEL GAS COMPOSITION A
CH4 (methane) Volume% A
C2H6 (ethane) Volume% A
C3H8 (propane) Volume% A
C4H10 (butane) Volume% A
C5H12 (pentane) 22151 East 91stVolume% A
C6H14 (hexane) Street Volume% A
C5H10 (cyclopen) Broken Arrow, Volume% A
Oklahoma 74014 USA
C6H12 (cyclohex) Volume%
Phone: (918)258-8551 A
C2H4 (ethene) Volume%
Fax: (918)251-5519 A
C3H6 (propene) Email:sales@zeeco.co
Volume% A
m
C4H8 (butene) Volume% A
C5H10 (pentene) Volume% A
C4H6 Volume% A
C5H8 (isoprene) Volume% A
CO2 Volume% A
H2O Volume% A
O2 Volume% A
N2 Volume% A
SO2 Volume% A
H2S Volume% A
CO Volume% A
NH3 Volume% A
H2 Volume% A
AR Volume% A
TOTAL 0% 0% 0% 0% 0%

LIQUID FUEL CHARACTERISTICS

FUEL OIL DESIGNATION Oil Name 1 Oil Name 2 Oil Name 3 Oil Name 4 Oil Name 5
HEATING VALUE * [LHV] Kcal/kg A
SPECIFIC GRAVITY A
HYDROGEN to CARBON RATIO [BY WEIGHT] A
VISCOSITY [POINT 1] at deg C SSU A
VISCOSITY [POINT 2] at deg C SSU A
API GRAVITY
DISTILLATION : ASTM INITIAL BOILING POINT deg C A
ASTM MID-POINT deg C A
ASTM END POINT deg C A
FUEL TEMPERATURE at BURNER deg C A
FUEL PRESSURE AVAILABLE at BURNER kg/Nm3 A
ATOMIZING MEDIUM AIR or STEAM or MECHANICAL or GAS A
ATOMIZING MEDIUM TEMPERATURE at BURNER deg C A
ATOMIZING MEDIUM PRESSURE at BURNER kg/Nm3 A
FUEL OIL METALS: Vanadium, Potassium, Sodium, Nickel wppm A
FUEL OIL COMPOSITION
Carbon (C) Weight% A
Hydrogen (H) Weight% A
Oxygen (O) Weight% A
Fixed Nitrogen (N) Weight% A
Sulfur (S) Weight% A
Ash Weight% A
Water (H2O) Weight% A
TOTAL 0.0 0.0 0.0 0.0 0.0 A

Confidential Property of Zeeco. To be returned upon request and used only in reference to contracts or proposal of this company. Reproduction of this print
or unauthorized use of this Document is prohibited.

22151 East 91st

Street
Broken Arrow,
Oklahoma 74014 USA
Phone: (918)258-8551
Fax: (918)251-5519
Email:sales@zeeco.co
m
 22151 East 91st
PURCHASER REFERENCE: FURNACE TAG NO.
BURNER SPECIFICATION Street
Broken Arrow, 0 0
Oklahoma 74014 USA
Adapted from API 560 / 535 Phone: (918)258-8551
Fax: (918)251-5519
REVISION: DATE: SHEET
Email:sales@zeeco.co 4 of 5
m
Modified with additional Information
0 30-Dec-99
EMISSION REQUIREMENTS REV
HEATER EQUIPMENT NUMBER 0 0 0 0 A
BURNER MODEL NUMBER 0 0 0 0 0 A
FIREBOX BRIDGEWALL TEMPERATURE deg C A
FIREBOX TEMPERATURE AT BURNER LOCATION deg C A
FIREBOX TEMPERATURE DETERMINATION MEASURED or ESTIMATED A
NOx mg/Nm3 A
CO mg/Nm3 A
UHC mg/Nm3 A
PARTICULATE mg/Nm3 A
VOC mg/Nm3 A
*CORRECTED TO 3% O2 [DRY BASIS at DESIGN HEAT RELEASE] A
NOISE SPECIFICATION (SOUND PRESSURE LEVEL, SINGLE BURNER) dBA at 1 m A
SPECIFICATION OPTIONS
BURNER PLENUM A
COMMON / INTEGRAL 11.1) Individual plenum A
PLENUM SHAPE 173.1) Round A
MATERIAL 174.1) A-569/570 Carbon Steel - {Standard} A
PLATE THICKNESS 175.1) 10 gauge (2.59 mm) material - {Standard} A
INTERNAL INSULATION / THICKNESS 176.1) Not Required A
METHOD OF CONSTRUCTION 177.1) Skip welded - {Standard} A
INLET AIR CONTROL 178.1) Not required A
MODE OF OPERATION 179.1) Not Required A
SEAL STRIP CONSTRUCTION REQUIRED 180.1) Not Required [10% leakage when damper is in the full closed position] - {Standard} A
LEAKAGE % 181.1) 10% leakage when damper is in the full closed position - {standard} A
BEARINGS REQUIRED FOR DAMPERS? 182.1) Not Required - {Standard} A
BURNER TILE 183.1) Included with burner - {Standard} A
REGEN TILE COMPOSITION 184.1) Not required A
SECONDARY TILE COMPOSITION 185.1) Not Required A
NEEDLE CONSTRUCTION REQUIRED 186.1) Not Required - {standard} A
RATED SERVICE TEMP., F 187.1) 3000 deg. F A
TEMP. OF PRE-FIRING, F 188.1) 500 deg. F A
ATTENUATION METHOD 189.2) Not Required A
FUEL GAS MANIFOLD 190.1) Not Required A
TYPE OF MANIFOLD 191.1) Not Required A
METHOD OF CONSTRUCTION 192.1) Not required A
MANIFOLD MATERIAL 193.1) Not Required A
GAS TIP MATERIAL 194.1) 310 Stainless Steel or ASTM-297 HK A
GAS RISER MATERIAL 195.1) Schedule 40 Carbon Steel - {standard} A
GAS MIXER MATERIAL 196.1) Schedule 40 Carbon Steel - {standard} A
OIL TIP / ATOMIZER MATERIAL 197.1) Not Required A
WASTE GAS / PSA LANCE REQUIRED 198.1) Not Required A
FUEL GAS / PILOT GAS CONNECTIONS 199.1) Threaded NPT A
PAINTING REQUIREMENTS 200.1) Zeeco Standard A
CARBON STEEL SURFACE PREPARATION 201.5) SSPC-SP-2 // ST-2 - Hand Tool Cleaning A
PRIMER 202.1) Not Required / By Other A
PRIMER THICKNESS 203.1) Not Required / By other A
1ST PAINT COAT 204.1) Not Required / By Other A
1ST PAINT COAT THK. 205.1) Not Required / By other A
TOP COAT 206.1) Not Required / By Other A
TOP COAT THICKNESS 207.1) Not Required / By other A
BURNER MOUNTING PLATE 208.1) Not Required - {standard} A
MOUNTING TEMPLATE REQUIRED 209.1) Not Required - {standard} A
LIFTING LUGS 210.1) Not Required - {standard} A
PRESSURE TAPS REQUIRED 211.1) Not Required - {standard} A

Confidential Property of Zeeco. To be returned upon request and used only in reference to contracts or proposal of this company. Reproduction of this print
or unauthorized use of this Document is prohibited.
 PURCHASER REFERENCE: FURNACE TAG NO.
BURNER SPECIFICATION 0 0

Adapted from API 560 / 535 REVISION: DATE: SHEET

5 of 5
Modified with additional Information
0 30-Dec-99
NOTES & CLARIFICATIONS REV
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
 22151 East 91st PURCHASER REFERENCE: FURNACE TAG NO.

BURNER SPECIFICATION Street

Broken Arrow,
Oklahoma 74014 USA 0 0
Phone: (918)258-8551
Adapted from API 560 / 535 Fax: (918)251-5519
Email:sales@zeeco.co
REVISION: DATE: SHEET
m 1 of 5
Modified with additional Information
PURCHASER: 0 FURNACE TAG NO.: 0

OWNER: 0 LOCATION: 0
GENERAL INFORMATION REV

PURCHASER NAME: A
ADDRESS: A
LINE 2 A
LINE 3 A
LINE 4 A
LINE 5 A
TELEPHONE: A
FAX: A
E-MAIL ADDRESS: A
PURCHASER REFERENCE: A

OWNER NAME: A
ADDRESS OF JOBSITE: A
LINE 2 A
LINE 3 A
LINE 4 A
LINE 5 A

FURNACE TAG NUMBER: A

FURNACE TYPE: A
LOCATION OF JOBSITE:

REVISION TABLE
REV. DATE DESCRIPTION OF REVISION REV
Z
Y
X
W
V
U
T
S
R
Q
P
O
N
M
L
K
J
I
H
G
F
E
D
22151 East 91st
Street C
Broken Arrow, B
Oklahoma 74014 USA A
Phone: (918)258-8551
Fax: (918)251-5519
Confidential Property of Zeeco. To be returned upon request and used only in
Email:sales@zeeco.co reference to contracts or proposal of this company. Reproduction of this print
m
or unauthorized use of this Document is prohibited.

Additional Information Required:

Note 1.1: Furnace drawings showing the mounting and locations of the burners.
Note 1.2: Exiting burner drawing with mounting details if this is retrofit application.
Note 1.3: Furnace Data Sheets with relevant burner design information.
Note 1.4: Any specifications that apply.
 PURCHASER REFERENCE: FURNACE TAG NO.
BURNER SPECIFICATION 0 0

Adapted from API 560 / 535 REVISION: DATE: SHEET

2 of 5
Modified with additional Information
12/30/1899 30-Dec-99

PURCHASER: 0 JOB NUMBER: 0

OWNER: 0 LOCATION: 0
HEATER GENERAL DATA REV
FURNACE EQUIPMENT TAG NUMBER A
FURNACE SERVICE A
FURNACE MANUFACTURER A
TYPE OF FURNACE 4.6) Cabin with arch, horizontal tubes, and without convection section A
SETTING REFRACTORY THICKNESS mm A
HEATER CASING THICKNESS mm A
FIREBOX INTERIOR HEIGHT (Floor to Convection Section) m A
FIREBOX INTERIOR LENGTH from WALL TO WALL m A
FIREBOX WIDTH between TUBES CENTERLINE TO CENTERLINE m A
TUBE CIRCLE DIAMETER [VERTICAL CYLINDRICAL HEATER] mm A
COMBUSTION AIR PLENUM 11.1) Individual plenum A
BURNER DATA
TYPE OF BURNER 12.1) Conventional NOx emissions technology A
BURNER PROJECT CLASSIFICATION 13.1) New furance application A
BURNER FLAME SHAPE 14.1 Round flame burner
TYPE OF FUEL(S) 15.3) Combination oil & gas
BURNER MODEL NUMBER A
QUANTITY OF BURNERS REQUIRED A
FIRING DIRECTION 18.1) Vertically upfired A
BURNER MOUNTING LOCATION 19.1) Floor A
BURNER CENTERLINE TO TUBE CENTERLINE mm A
BURNER CENTERLINE TO ADJACENT BURNER CENTERLINE mm A
BURNER CENTERLINE TO UNSHIELDED REFRACTORY mm A
BURNER CIRCLE DIAMETER [VERTICAL CYLINDRICAL HEATER] mm A
PILOT REQUIRED 24.1) Yes A
PILOT MODEL A
PILOT IGNITION METHOD 22151 East 91st 26.1) Manual ignition - {Standard} A
FLAME ROD Street 27.1) No - {Standard} A
Broken Arrow,
PILOT FUEL Oklahoma 74014 USA 28.1) Not required A
FUEL PRESSURE at PILOT kg/cm2
Phone: (918)258-8551 A
Fax: (918)251-5519
PILOT HEAT RELEASE kcal/hr A
Email:sales@zeeco.co
PILOT CONNECTION m 31.1) Threaded NPT - {Standard} A
PILOT IGNITION TRANSFORMER VOLTAGE 32.1) Input voltage 110 VAC @ 60 hz, single phase A
PILOT IGNITION TRANSFORMER HOUSING 33.1) Not Required A
OPERATING DATA
BURNER FUEL TYPE Gas Fired Oil Fired Off Gas A
DESIGN HEAT RELEASE per BURNER * [LHV] MW A
NORMAL HEAT RELEASE per BURNER * [LHV] MW A
MINIMUM HEAT RELEASE per BURNER * [LHV] MW A
OTHER CONDITION: MW A
OTHER CONDITION: MW A
BURNER TURNDOWN REQUIRED A
EXCESS AIR at DESIGN HEAT RELEASE % A
COMBUSTION AIR SOURCE 42.1) Natural draft [ND]- air only A
COMBUSTION AIR TEMPERATURE at BURNER deg C A
COMBUSTION AIR RELATIVE HUMIDITY % A
MAXIMUM AVAILABLE DRAFT at BURNER Pa A
HEATER DRAFT TYPE 42.1) Natural draft [ND]- air only A
BURNER AIR PRESSURE DROP at DESIGN HEAT RELEASE Pa A
HEATER ELEVATION ABOVE SEA LEVEL m A
FLAME LENGTH at DESIGN HEAT RELEASE mm A
FLAME WIDTH or DIAMETER at DESIGN HEAT RELEASE mm A
FLAME WIDTH or DIAMETER at DESIGN HEAT RELEASE mm A

Confidential Property of Zeeco. To be returned upon request and used only in reference to contracts or proposal of this company. Reproduction of this print
or unauthorized use of this Document is prohibited.
 PURCHASER REFERENCE: FURNACE TAG NO.
BURNER SPECIFICATION 0 0

Adapted from API 560 / 535 REVISION: DATE: SHEET

3 of 5
Modified with additional Information
0 30-Dec-99
GAS FUEL CHARACTERISTICS REV
FUEL GAS DESIGNATION Gas Name 1 Gas Name 2 Gas Name 3 Gas Name 4 Gas Name 5 A
HEATING VALUE * [LHV] KJ/Nm3 0 0 0 0 0 A
HEATING VALUE * [HHV] KJ/Nm3 0 0 0 0 0 A
SPECIFIC GRAVITY [AIR = 1.0] 0.00 0.00 0.00 0.00 0.00 A
MOLECULAR WEIGHT 0.0 0.0 0.0 0.0 0.0 A
FUEL TEMPERATURE at BURNER deg C A
FUEL PRESSURE AVAILABLE at BURNER Pa A
FUEL GAS COMPOSITION A
CH4 (methane) Volume% A
C2H6 (ethane) Volume% A
C3H8 (propane) Volume% A
C4H10 (butane) Volume% A
C5H12 (pentane) 22151 East 91stVolume% A
C6H14 (hexane) Street Volume% A
Broken Arrow,
C5H10 (cyclopen) Volume% A
Oklahoma 74014 USA
C6H12 (cyclohex) Volume%
Phone: (918)258-8551 A
C2H4 (ethene) Fax: (918)251-5519
Volume% A
Email:sales@zeeco.co
Volume%
C3H6 (propene) A
m
C4H8 (butene) Volume% A
C5H10 (pentene) Volume% A
C4H6 Volume% A
C5H8 (isoprene) Volume% A
CO2 Volume% A
H2O Volume% A
O2 Volume% A
N2 Volume% A
SO2 Volume% A
H2S Volume% A
CO Volume% A
NH3 Volume% A
H2 Volume% A
AR Volume% A
TOTAL 0% 0% 0% 0% 0%

LIQUID FUEL CHARACTERISTICS

FUEL OIL DESIGNATION Oil Name 1 Oil Name 2 Oil Name 3 Oil Name 4 Oil Name 5
HEATING VALUE * [LHV] KJ/Nm3 A
SPECIFIC GRAVITY A
HYDROGEN to CARBON RATIO [BY WEIGHT] A
VISCOSITY [POINT 1] at deg C SSU A
VISCOSITY [POINT 2] at deg C SSU A
API GRAVITY
DISTILLATION : ASTM INITIAL BOILING POINT deg C A
ASTM MID-POINT deg C A
ASTM END POINT deg C A
FUEL TEMPERATURE at BURNER deg C A
FUEL PRESSURE AVAILABLE at BURNER Pa A
ATOMIZING MEDIUM AIR or STEAM or MECHANICAL or GAS A
ATOMIZING MEDIUM TEMPERATURE at BURNER deg C A
ATOMIZING MEDIUM PRESSURE at BURNER Pa A
FUEL OIL METALS: Vanadium, Potassium, Sodium, Nickel wppm A
FUEL OIL COMPOSITION
Carbon (C) Weight% A
Hydrogen (H) Weight% A
Oxygen (O) Weight% A
Fixed Nitrogen (N) Weight% A
Sulfur (S) Weight% A
Ash Weight% A
Water (H2O) Weight% A
TOTAL 0.0 0.0 0.0 0.0 0.0 A

Confidential Property of Zeeco. To be returned upon request and used only in reference to contracts or proposal of this company. Reproduction of this print
or unauthorized use of this Document is prohibited.

22151 East 91st

Street
Broken Arrow,
Oklahoma 74014 USA
Phone: (918)258-8551
Fax: (918)251-5519
Email:sales@zeeco.co
m
 22151 East 91st
Street PURCHASER REFERENCE: FURNACE TAG NO.
BURNER SPECIFICATION Broken Arrow,
0 0
Oklahoma 74014 USA
Phone: (918)258-8551
Adapted from API 560 / 535 Fax: (918)251-5519 REVISION: DATE: SHEET
Email:sales@zeeco.co
m 4 of 5
Modified with additional Information
0 30-Dec-99
EMISSION REQUIREMENTS REV
HEATER EQUIPMENT NUMBER 0 0 0 0 A
BURNER MODEL NUMBER 0 0 0 0 0 A
FIREBOX BRIDGEWALL TEMPERATURE deg C A
FIREBOX TEMPERATURE AT BURNER LOCATION deg C A
FIREBOX TEMPERATURE DETERMINATION MEASURED or ESTIMATED A
NOx mg/Nm3 A
CO mg/Nm3 A
UHC mg/Nm3 A
PARTICULATE mg/Nm3 A
VOC mg/Nm3 A
*CORRECTED TO 3% O2 [DRY BASIS at DESIGN HEAT RELEASE] A
NOISE SPECIFICATION (SOUND PRESSURE LEVEL, SINGLE BURNER) dBA at 1 m A
SPECIFICATION OPTIONS
BURNER PLENUM A
COMMON / INTEGRAL 11.1) Individual plenum A
PLENUM SHAPE 173.1) Round A
MATERIAL 174.1) A-569/570 Carbon Steel - {Standard} A
PLATE THICKNESS 175.1) 10 gauge (2.59 mm) material - {Standard} A
INTERNAL INSULATION / THICKNESS 176.1) Not Required A
METHOD OF CONSTRUCTION 177.1) Skip welded - {Standard} A
INLET AIR CONTROL 178.1) Not required A
MODE OF OPERATION 179.1) Not Required A
SEAL STRIP CONSTRUCTION REQUIRED 180.1) Not Required [10% leakage when damper is in the full closed position] - {Standard} A
LEAKAGE % 181.1) 10% leakage when damper is in the full closed position - {standard} A
BEARINGS REQUIRED FOR DAMPERS? 182.1) Not Required - {Standard} A
BURNER TILE 183.1) Included with burner - {Standard} A
REGEN TILE COMPOSITION 184.1) Not required A
SECONDARY TILE COMPOSITION 185.1) Not Required A
NEEDLE CONSTRUCTION REQUIRED 186.1) Not Required - {standard} A
RATED SERVICE TEMP., F 187.1) 3000 deg. F A
TEMP. OF PRE-FIRING, F 188.1) 500 deg. F A
ATTENUATION METHOD 189.2) Not Required A
FUEL GAS MANIFOLD 190.1) Not Required A
TYPE OF MANIFOLD 191.1) Not Required A
METHOD OF CONSTRUCTION 192.1) Not required A
MANIFOLD MATERIAL 193.1) Not Required A
GAS TIP MATERIAL 194.1) 310 Stainless Steel or ASTM-297 HK A
GAS RISER MATERIAL 195.1) Schedule 40 Carbon Steel - {standard} A
GAS MIXER MATERIAL 196.1) Schedule 40 Carbon Steel - {standard} A
OIL TIP / ATOMIZER MATERIAL 197.1) Not Required A
WASTE GAS / PSA LANCE REQUIRED 198.1) Not Required A
FUEL GAS / PILOT GAS CONNECTIONS 199.1) Threaded NPT A
PAINTING REQUIREMENTS 200.1) Zeeco Standard A
CARBON STEEL SURFACE PREPARATION 201.5) SSPC-SP-2 // ST-2 - Hand Tool Cleaning A
PRIMER 202.1) Not Required / By Other A
PRIMER THICKNESS 203.1) Not Required / By other A
1ST PAINT COAT 204.1) Not Required / By Other A
1ST PAINT COAT THK. 205.1) Not Required / By other A
TOP COAT 206.1) Not Required / By Other A
TOP COAT THICKNESS 207.1) Not Required / By other A
BURNER MOUNTING PLATE 208.1) Not Required - {standard} A
MOUNTING TEMPLATE REQUIRED 209.1) Not Required - {standard} A
LIFTING LUGS 210.1) Not Required - {standard} A
PRESSURE TAPS REQUIRED 211.1) Not Required - {standard} A

Confidential Property of Zeeco. To be returned upon request and used only in reference to contracts or proposal of this company. Reproduction of this print
or unauthorized use of this Document is prohibited.
 PURCHASER REFERENCE: FURNACE TAG NO.
BURNER SPECIFICATION 0 0

Adapted from API 560 / 535 REVISION: DATE: SHEET

5 of 5
Modified with additional Information
0 30-Dec-99
NOTES & CLARIFICATIONS REV
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A