Scribd
Upload
217 views3 pages

BIOMASS Products: Mechanical Durability Tester Bioenergy TUMBLER 1000 and 3000 Acc. EN 15210-1

The document describes various biomass testing products that meet European standards for determining properties of biomass like pellets and reference materials. This includes the Bioenergy TUMBLER 1000 and 3000 durability testers that test pellet abrasion according to EN 15210-1. Also described are a sampling spear that takes biomass samples per EN 14778, a bulk density cylinder for determining density according to EN 15103, and a humimeter moisture meter. Reference materials of various biomasses are also listed that specify chemical properties and can be used to validate test results.

Uploaded by

Željka Đurić
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
217 views3 pages

BIOMASS Products: Mechanical Durability Tester Bioenergy TUMBLER 1000 and 3000 Acc. EN 15210-1

The document describes various biomass testing products that meet European standards for determining properties of biomass like pellets and reference materials. This includes the Bioenergy TUMBLER 1000 and 3000 durability testers that test pellet abrasion according to EN 15210-1. Also described are a sampling spear that takes biomass samples per EN 14778, a bulk density cylinder for determining density according to EN 15103, and a humimeter moisture meter. Reference materials of various biomasses are also listed that specify chemical properties and can be used to validate test results.

Uploaded by

Željka Đurić
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 3

BIOMASS Products

Mechanical durability tester Bioenergy TUMBLER 1000 and 3000 acc. EN 15210-1

The series of pellets mechanical durability testers Bioenergy


TUMBLER meets all requirements of the new European
standard EN 15210-1 "method for determination of
mechanical durability of pellets. This is required as a
reference method for determination of the mechanical
durability or the abrasion for testing laboratories. The
Bioenergy TUMBLER was tested in an international laboratory
comparison test and is calibrated with appropriate reference
materials, which ensures the reproducibility of the analytical
results in your laboratory or in your production.

TUMBLER 1000 desktop unit suitable for factory production


control
TUMBLER 3000 stationary unit suitable for accredited testing laboratories

Required Accessories: balance (at least 2 kg, accuracy 0.1 g), round hole sieve 3.15 mm

_______________________________________________________________________________________

Sampling spear 1300 x 55mm, Aluminium ALMG3 F20 acc. EN 14778

The sampling spear is particularly suitable for the sampling of


stationary, free-flowing biomass with a nominal top size smaller
than 25 mm and is mainly used for sampling of wood pellets, other
biomass pellets and corn kernels from tanks, storage rooms or
vehicles.
The sampling spear meets the requirements of EN 14778 "Solid
biofuels - Sampling" where the sampling process as well as the
sampling equipment is defined.

_______________________________________________________________________________________

Bulk density cylinder according to EN 15103

The bulk density cylinder has a filling volume of 5 l 2% and is required for the determination of bulk

ROFA d.o.o. Zapresic Jelice Jug 25 10290 ZAPRESIC, CROATIA tel. +385-1-3357-321 fax +385 (0)1 3312-560
rofa@rofa.hr www.rofa.hr www.rofa.at Page 1
density acc. to EN 15103 for e.g. wood pellets.

Required Accessories: balance (at least 6 kg, precision 1 g)

_______________________________________________________________________________________

Round hole sieve 3.15 mm, 400 x 100 mm according to ISO 3310-2

The round hole sieve is required for sieving/separation of fine particles within the determination of the
mechanical durability of pellets.

______________________________________________________________________________________

Moisture content determination humimeter BP1 for pellets

The humimeter is a measurement instrument for rapid moisture content determination of


wood pellets and other biomass pellets. The instrument allows measurement without
sample preparation with very high accuracy by automatic bulk density compensation
within seconds.

Accessories: PC interface, software and printer

_______________________________________________________________________________________

Biomass reference materials


Different types of biomass materials range from wood with bark and straw to materials with higher element
contents like seaweed, olive residues or palm bit kernels. The reference materials are dried, prepared
according to EN 14780 (grain size <1mm) and appropriate for immediate analysis. From the available
materials the following chemical parameters are specified: ash, Chlorine, Sulphur, Hydrogen, Carbon,
Nitrogen and major and minor elements (Calcium, Potassium, Magnesium, Phosphorus, Silicium, Cadmium,
Copper, Zinc, Lead, Aluminum).
The available reference materials are:
fir with bark hardwood with glue spanish thistle

ROFA d.o.o. Zapresic Jelice Jug 25 10290 ZAPRESIC, CROATIA tel. +385-1-3357-321 fax +385 (0)1 3312-560
rofa@rofa.hr www.rofa.hr www.rofa.at Page 2
rape straw straw almond kernels

wood with bark coconut bark palm bit kernels

Packaging unit: 30g


reference material

ROFA d.o.o. Zapresic Jelice Jug 25 10290 ZAPRESIC, CROATIA tel. +385-1-3357-321 fax +385 (0)1 3312-560
rofa@rofa.hr www.rofa.hr www.rofa.at Page 3

You might also like