Scribd
Upload
32 views1 page

CP MPT 323-3 Specs

The 3MT Corner Drill is designed for heavy-duty drilling in cramped areas. It features extra heavy-duty greased gearing, hardened motor liners, a throttle control, feed screws, and a governed motor. The drill has a 1-inch drilling capacity, 8.5-inch spindle height, and weighs 21.5 pounds.

Uploaded by

Zeck
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
32 views1 page

CP MPT 323-3 Specs

The 3MT Corner Drill is designed for heavy-duty drilling in cramped areas. It features extra heavy-duty greased gearing, hardened motor liners, a throttle control, feed screws, and a governed motor. The drill has a 1-inch drilling capacity, 8.5-inch spindle height, and weighs 21.5 pounds.

Uploaded by

Zeck
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 1

Model

323-3
3MT Corner Drill
Designed for heavy-duty use in cramped areas. Features extra heavy-duty
grease packed gearing, hardened ground motor liners, a teasing throttle, feed
screws and a governor controlled motor. Includes ratchet wrench.

Drilling Capacity. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1"


Free Speed. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 175 rpm
Morse Taper. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . #3
Maximum HP . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1.50 hp
Height of Spindle. . . . . . . . . . . . . . . . . . . . . . . . . . . . 8-1/2"
Length. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 26-1/8"
Weight. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21.5 lbs
Spindle Offset. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-7/16"

02202017Rev5MME | NP

You might also like