Scribd
Upload
4K views1 page

Eb08 007

The document provides pin descriptions for vehicle diagnostic connectors and notes on connecting an e-Stroke system to a vehicle for diagnostic purposes. It lists the pins for a 6-pin and 9-pin connector and provides notes on referencing vehicle wiring schematics, recommended connection methods, locating J1708 and J1939 connections, and an adapter that may be required for some New Flyer applications.

Uploaded by

mehralsmensch
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
4K views1 page

Eb08 007

The document provides pin descriptions for vehicle diagnostic connectors and notes on connecting an e-Stroke system to a vehicle for diagnostic purposes. It lists the pins for a 6-pin and 9-pin connector and provides notes on referencing vehicle wiring schematics, recommended connection methods, locating J1708 and J1939 connections, and an adapter that may be required for some New Flyer applications.

Uploaded by

mehralsmensch
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 1

e-Stroke SAE J1708 / J1939 Wiring Reference

Vehicle Diagnostic Connector Pin Descriptions:


6-Pin Connector 9-Pin Connector
A J1708 (+) A Power (-)
B J1708 (-) B Power (+)

C Power (+) C CAN J1939 HI (+)


D N/A D CAN J1939 LO (-)
E Power (-) E CAN J1939 Shield
F N/A F J1708 (+)
G J 1708 (-)
CAN J1939 HI (+) Chassis
H
New Flyer Only, See Note 6
CAN J1939 LO (-) Chassis
J
New Flyer Only, See Note 6

Notes:
1. Reference Vehicle Wiring Schematics for additional wiring information: wire color,
locations.
2. Consult vehicle manufacturer for recommended connection methods.
3. The SAE J1708 connection can typically be made near the 6 or 9 pin connector.
4. An unused SAE J1939 drop leg will need to be located or created to make the J1939
connection.
5. Reference e-Stroke System schematics for SAE J1708 / J1939 e-Stroke wire colors:
MGM DWG 9230100 - e-Stroke GEN 3 Tractor / Truck / Bus System Schematic
e-Stroke Technical Manual Section 8.1.1
EB 08-022 - e-Stroke Gen 2 Tractor / Truck / Bus System Schematic
e-Stroke Technical Manual Section 8.1.2
6. The e-Stroke system may be connected to Chassis J1939 on Some 2009 & Newer New
Flyer applications. E-DT operation may require the MGM P/N 8290239 Adapter for
connection to the 9-PIN Diagnostic Connector, if the display shows No Connection.

EB 08-007 rev. 02 Page 1

You might also like