TCX-1

11
Time Partner
Electronic Time Clock

Users Guide

Downloaded from www.Manualslib.com manuals search engine

 Thank you...
for purchasing another fine product from AMANO CINCINNATI, INC.
If you have any questions or need assistance setting up your clock,
please dont hesitate to call us toll free at

1-800-253-9836
IMPORTANT:
Do not return this clock to the retailer.
Call us at the number above for assistance.

For more information about Amanos complete product line

visit our web site at
http://www.tcx11.com

PROPRIETARY NOTICE
This document contains proprietary information and such information may not be repro-
duced in whole or in part without the written permission from Amano Cincinnati, Inc.,
140 Harrison Avenue, Roseland, New Jersey, 07068.

Amano Cincinnati, Inc. reserves the right to make equipment changes and improve-
ments which may not be reflected in this document. Portions of this document may
have been updated to include the latest hardware or firmware version, if applicable.

We recommend that this document be read in its entirety before any attempt is made
to operate the equipment.

Amano Cincinnati, Inc. (Mon. - Fri. 8:00 - 5:00 PST) 1-800-253-9836

Downloaded from www.Manualslib.com manuals search engine

 Page 1

Your TCX-11

Print Button
Date and
Programming
Display

Analog Clock Print

Window

Cover Lock

Removing Cover the Packing Materials

1. Turn the key clockwise to
unlock the cover.

2. Lift the cover up, then pull it

towards you to remove it.

3. Lift the printer block and

remove the spacer.
4. Remove the spacer between
the Ribbon Cartridge and the
Printer Carriage.
5. Re-install the cover. Your
TCX-11 is ready for use!

1-800-253-9836 (Mon. - Fri. 8:00 - 5:00 PST) Amano Cincinnati, Inc.

Downloaded from www.Manualslib.com manuals search engine

 Page 2

Make a Test Print

1. Plug in the power cord.
2. The clock hands will reset to Pacific Standard Time.
3. Insert a time card into the TCX-11. The clock will automatically
print YEAR, MONTH, DATE and TIME with AM or PM.

Note: The TCX-11 will automatically adjust for Daylight Saving Time.
If the imprint is satisfactory and you are going to place the TCX-11
on a desk, table or shelf, the TCX-11 is ready to use.
If you wish to change the time on the TCX-11, go to pages 4 and 5.
If you do not use Daylight Saving Time, go to pages 4 and 6
for instructions on how to disable this feature.
If you are going to mount the clock on a wall, go to page 8
for wall mounting instructions.
If you wish to change what and how the TCX-11 prints,
go to pages 4 and 6 for available options.

Amano Cincinnati, Inc. (Mon. - Fri. 8:00 - 5:00 PST) 1-800-253-9836

Downloaded from www.Manualslib.com manuals search engine

 Page 3

Remove the Cover

Before you change any settings, you must remove the cover.
1. Turn the key clockwise to unlock the cover.
2. Lift the cover up, then pull it towards you to remove it.

Internal View
Program Buttons

Digital Display

Reset Button

Analog Clock

Ribbon Cartridge

Printer Platen

Card Stopper

Mounting Hole

Card Stopper
Adjustment
Screw

1-800-253-9836 (Mon. - Fri. 8:00 - 5:00 PST) Amano Cincinnati, Inc.

Downloaded from www.Manualslib.com manuals search engine

 Page 4

Program Mode Guide

Unlock and remove the cover. Locate the PROGRAM, CHANGE and
ENTER buttons on top of the clock.

The PROGRAM button is used to start the Program Mode.

Please note: If you make a mistake, or if you are finished, you may
press the PROGRAM button at any time to exit the Program Mode. If
a program step is in the process of being changed when this button is
pushed, the new information will not be saved.
The CHANGE button is used to change the information shown on
the display.
The ENTER button is used to accept the information shown on the
display and save it in memory.
The RESET button is located on the right side of the clock. Press this
button in case of a card jam.

Starting the Program Mode

1. To start the Program Mode, unlock and remove
the cover.
2. Press and hold the PROGRAM button to access
the Main Programming Menu.
3. When Pl dA E flashes in the display, release the Pl dA E
PROGRAM button.

Amano Cincinnati, Inc. (Mon. - Fri. 8:00 - 5:00 PST) 1-800-253-9836

Downloaded from www.Manualslib.com manuals search engine

 Page 5

Note: Press the CHANGE button to cycle through each of the

programming steps. When the display flashes the step you want,
press the ENTER button.
1. Setting the Year, Month and Date
1. When the display flashes Pl dA E, press the Pl dA E
ENTER button.
2. Press the CHANGE button until the correct year
95 0l 0l
appears, then press the ENTER button.
3. Press the CHANGE button until the correct month 98 0l 0l
appears, then press the ENTER button.
4. Press the CHANGE button until the correct date 98 040l
appears, then press the ENTER button.
5. When the display flashes the correct year, month 98 04l8
and date, press the ENTER button.
6. When the display flashes Pl dA E, press the Pl dA E
CHANGE button to move to Setting the Clock Time,
or press the PROGRAM button to exit the Program
Mode.

2. Setting the Clock Time

Note: Use a 24 hour and 60 minute format when setting the time.
For example, 2:00 PM = 14:00.
1. When the display flashes P2 CLoc, press the P2 CLoc
ENTER button.
2. Press the CHANGE button until the correct hour l2:00
appears, then press the ENTER button.
3. Press the CHANGE button until the correct minute l4:00
appears, then press the ENTER button.
4. When the display flashes the correct time, press l4:07
the ENTER button.
5. When the display flashes P2 CLoc, press the P2 CLoc
CHANGE button to move to the Daylight Saving
Time On/Off Setting, or press the PROGRAM but-
ton to exit the Program Mode.

1-800-253-9836 (Mon. - Fri. 8:00 - 5:00 PST) Amano Cincinnati, Inc.

Downloaded from www.Manualslib.com manuals search engine

 Page 6

3. Setting the Daylight Saving Time On/Off.

Note: When this step is set to ON, the clocks time will automatically
change for Daylight Saving Time. When this step is set to OFF, the
clocks time will not change for Daylight Saving Time.

1. When the display flashes P3 dLS , press the P3 dLS

ENTER button.
2. Press the CHANGE button to alternate between On
on
and Off.
3. When the display flashes the correct setting, press
the ENTER button. oFF

4. When the display flashes P3 dLS , press the

P3 dLS
CHANGE button to move to the Print Style setting,
or press the PROGRAM button to exit the Program
Mode.

4. Changing the Print Style

1. When the display flashes P4 Prn , press the P4 Prn
ENTER button.
2. The display will flash the current setting. Press the
CHANGE button to scroll through each of the five Pr-2
Print Style Settings:
Pr-1 Day, 24H, 100TH
Pr-2 Day, 12H, 60TH
Pr-3 Month, Date, 24H, 100TH
Pr-4 Month, Date, 12H, 60TH
Pr-5 Year, Month, Date, 12H, 60TH
3. When the display flashes the correct setting, press Pr-2
the ENTER button.
4. When the display flashes P4 Prn , press P4 Prn
the CHANGE button to move to the Other
Options menu, or press the PROGRAM button to
exit the Program Mode.

Amano Cincinnati, Inc. (Mon. - Fri. 8:00 - 5:00 PST) 1-800-253-9836

Downloaded from www.Manualslib.com manuals search engine

 Page 7

5. Accessing the Other Options Menu

Do not access this menu unless you wish to switch between the
automatic and manual print modes.

1. When the display flashes P5 O hr, press the P5 O hr

ENTER button.
2. Press the CHANGE button three times to advance II Prn
to I 4 APr .

6. Setting the Print Method

1. When the display flashes I 4 APr , press the
I4 APr
ENTER button.
2. Press the CHANGE button until the correct printing
on P
mode appears, then press the ENTER button.
on P (Auto Print) allows you to print automatically
by activating the paper detect switch.
OFF (Manual Print) allows you to print whenever
the PRINT button is pushed.
on P:5 (Precision Print) requires you to activate the
paper detect switch and press the
PRINT button.
3. The display will flash I4 APr . I4 APr

7. Exit Program Mode

1. Press and hold the PROGRAM button until the dis-
play shows the current date. The clock hands will
reset to the current time.

1-800-253-9836 (Mon. - Fri. 8:00 - 5:00 PST) Amano Cincinnati, Inc.

Downloaded from www.Manualslib.com manuals search engine

 Page 8

Replacing the Ribbon

To Remove: To Insert
1. Pull the two white release 1. If the print mechanism is
tabs (B) upward. Remove down and a piece of paper
the ribbon cassette. cannot be inserted, press the
RESET button to move the
carriage up. This will make the
ribbon installation easier.
2. Insert a new ribbon between
the ribbon guide (C) and the
printer head (D).
3. Turn the knob on the cassette
clockwise one turn to take up
any slack in the ribbon.
4. Replace the cover.
5. Check the printing quality to
confirm that you have installed
the ribbon properly.
Wall Mounting
Note: Screw locations should be marked on the wall. Do not
insert a drill bit through the mounting holes of the clock when
drilling holes.
1. Unlock and remove the cover.
2. Locate the teardrop mounting
hole and the two mounting
holes in the back plate of the
clock.
3. Approximate the final loca-
tion of the clock. Insert
one #10 wood screw or
equivalent into the wall
1 (38mm) from the top
center location of the
clock.
4. Hang the clock on the screw using the teardrop mounting hole.
5. Secure the clock to the wall by inserting screws through the
bottom two mounting holes.

Amano Cincinnati, Inc. (Mon. - Fri. 8:00 - 5:00 PST) 1-800-253-9836

Downloaded from www.Manualslib.com manuals search engine

 Page 9

Specifications
Power Requirements: For Clock Input: AC16.5V, 60Hz, 0.6A (Max.)
For AC Adapter: AC100V 10%, 50/60Hz
AC120V 10%, 50/60Hz
AC220V 10%, 50/60Hz
AC240V 10%, 50/60Hz
Ambient Temperature: -10C~45C (14F~113F)
Ambient Humidity: 10%~90% (no condensation)
Dimensions: 6 (172 mm) wide x 8 (150 mm) high x
6(165 mm) deep
Weight: 2.725 Kg (6 lbs.)
Environment: Indoor use only; dust-free environment
Keep out of direct sunlight

1-800-253-9836 (Mon. - Fri. 8:00 - 5:00 PST) Amano Cincinnati, Inc.

Downloaded from www.Manualslib.com manuals search engine

 A Company of the AMANO Group
140 Harrison Avenue, Roseland, NJ 07068
1-800-253-9836
http://www.amano.com

AJR-310101 Copyright 2001 Amano Cincinnati, Inc. Printed in U.S.A. 08/01/6M

Downloaded from www.Manualslib.com manuals search engine