Scribd
Upload
170 views2 pages

Visual Test Procedure: P & S Technical Consultant and Serviced Co.,Ltd Visual Examination Report

This visual test procedure report summarizes the visual examination of welds on part number 130 BLADE STOP Unit 1. The examination found the welds to be in acceptable condition with no defects noted. The report documents the examination date, materials inspected, acceptance criteria used, equipment employed, and inspection of 28 welded joints that were all found to be acceptable. An inspection checklist confirms that pre-weld, during weld, and post-weld inspection steps were followed to verify compliance with welding standards and procedures.

Uploaded by

pstechnical_43312697
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
170 views2 pages

Visual Test Procedure: P & S Technical Consultant and Serviced Co.,Ltd Visual Examination Report

This visual test procedure report summarizes the visual examination of welds on part number 130 BLADE STOP Unit 1. The examination found the welds to be in acceptable condition with no defects noted. The report documents the examination date, materials inspected, acceptance criteria used, equipment employed, and inspection of 28 welded joints that were all found to be acceptable. An inspection checklist confirms that pre-weld, during weld, and post-weld inspection steps were followed to verify compliance with welding standards and procedures.

Uploaded by

pstechnical_43312697
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 2

VISUAL TEST PROCEDURE

P & S Technical Consultant and Serviced Co.,Ltd


Visual Examination Report
Report No.: VT-U1-011 Examination Date: 20-8-15 Weldmap.: 130 BLADE STOP Unit 1
Client: BALTEC INLET & Project : Amata Bowin Combined Cycle
Job No.: V17488
EXHAUST SYSTEMS Congregating Plant Project
Part Examined: Drawing No.: 8614MA-130-0710
Material: SS400 Thickness:15 mm.,10 mm.
Reference Procedure Specification: Surface Condition: Good
Acceptance Criteria : AWSD 1:1:2010 Surface Temperature: 30 C
Method Description Equipment and Tools
Precleaning Method: Brushing/grinding Mirrors: X
Type of examination: Direct Welding Gauges: 1401
Lighting: Required Magnifiers: X
Stage of examination: After weld Borescope:
Other:

Joint No.
1. ST-001 9 17 25
2. ST-002 10 18 26
3. ST-003 11 19 27
4. ST-004 12 20 28
5. ST-005 13 21
6. ST-006 14 22
7. ST-007 15 23
8. ST-008 16 24

EXAMINATION RESULTS

Acceptable

Name Signature Date


QC. Inspector Ms.Fhontip M 20/8/2014
Client Representative
Authorized Inspector
Page 1 of 2
VISUAL TEST PROCEDURE
P & S Technical Consultant and Serviced Co.,Ltd

Checklist for Welding Examination


1. Before Welding
q Review applicable documentation Yes
q Check welding procedures Yes
q Check welder qualifications Yes
q Establish hold points Yes
q Develop inspection plan Yes
Develop inspection documentation system Yes
q Develop inspection documentation system Yes
q Develop system for identification of rejects Yes
q Check conditions of welding equipment Yes
q Check quality and condition of base and filler materials Yes
q Check joint preparation, fit-up, cleanliness Yes
q Check adequacy of alignment devices Yes
q Check preheat (or initial) temperature N/A

2. During Welding

q Check compliance with WPS provisions Yes


q Check quality, placement of key weld passes Yes
q Check weld bead sequencing and placement Yes
q Check interpass temperature and cleaning Yes
q Check adequacy of back gouging Yes
q Monito any specified in-process NDE N/A

3. After Welding

q Check finished weld appearance and soundness Yes


q Check weld sizes and dimensions Yes
q Check dimensional accuracy of the weldment Yes
Carry our or monitor / evaluate specified NDE Yes
q Monitor any PWHT or other post-weld work Yes
q Finalize and collate inspection documentation N/A

Page 2 of 2

You might also like