0% found this document useful (0 votes)

722 views464 pages

Auto Clave

Uploaded by

nokaraju

We take content rights seriously. If you suspect this is your content, claim it here.

Available Formats

Download as PDF, TXT or read online on Scribd

0% found this document useful (0 votes)

722 views464 pages

Auto Clave

Uploaded by

nokaraju

We take content rights seriously. If you suspect this is your content, claim it here.

Available Formats

Download as PDF, TXT or read online on Scribd

You are on page 1/ 464

Parker Autoclave Engineers: Fluid Components Product Catalog

February 2013

Valves, Fittings and Tubing

Pressures to 150,000 psi (10,000 bar)
Needle Valves
Low Pressure

10V & SW Series

Pressures to 15,000 psi (1034 bar)
Since 1945 Parker Autoclave Engineers has designed
and built premium quality valves, fittings and tubing.
This commitment to engineering and manufacturing
excellence has earned Parker Autoclave a reputation
for reliable efficient product performance. Parker
Autoclave Engineers has long been established as
the world leader in high pressure fluid handling
components for the chemical/petrochemical,
research, and oil and gas industries.
Low Pressure Valve Features:
10V Series valve design provides in-line tube
connections for 1/4 to 1/2 tube sizes.
SW Series valve design provides increased flow
capabilities.
Tubing sizes from 1/8 to 1/2.
Rising stem/barstock body design.
Non-rotating stem prevents stem/seat galling.
Metal-to-metal seating achieves bubble-tight shut-
off, longer stem/seat life in abrasive flow, greater
durability for repeated on/off cycles and excellent

Needle Valves - 10V & SW Series

corrosion resistance.
PTFE encapsulated packing provides dependable
stem and body sealing.
Stem sleeve and packing gland materials have
been selected to achieve extended thread cycle life
and reduced handle torque.
Choice of Vee or Regulating stem tips.
Available in five body patterns.
Parker Autoclave Engineers valves are
complemented by a complete line of low pressure
fittings, tubing, check valves and line filters. The
10V and SW series use Parker Autoclave Engineers'
SpeedBite connection. This single-ferrule
compression sleeve connection delivers fast, easy
make-up and reliable bubble-tight performance in
liquid or gas service.
Low Pressure

All general terms and conditions of sale, including limitations of our liability, apply to all products and services sold.
www.autoclave.com 1
Valve Series - 10V Series
Pressures to 15,000 psi (1034 bar)

Tube Pressure
Outside Rating
Diameter Orifice psi (bar)
Size Connection Size Rated @ Room
Inches Type Inches (mm) Cv* Temperature**

1/8 W125 0.094 (2.39) 0.12 15,000 (1034)

1/4 W250 0.125 (3.18) 0.20 15,000 (1034)
3/8 W375 0.125 (3.18) 0.20 15,000 (1034)
1/2 SW500 0.250 (6.35) 0.86 10,000 (690)

Notes:
* CV values shown are for 2-way straight valve pattern. For 2-way
angle patterns, increase CV value 50%. (Based on water)

** For complete temperature ratings see pressure/temperature rating

guide in Technical Information section.

Generalized Flow Coefficient Curves (Cv)

6
LOW FRICTION ALUMINUM POWDER COATED
BRONZE PACKING GLAND STAINLESS STEEL
5
Number of turns open

HANDLE

COLD WORKED TYPE 316

SS BODY IN FIVE
PATTERNS 4
LOCKING DEVICE
NON-ROTATING Regulating Stem
STEM 3
ANTI-EXTRUSION
ADJUSTABLE PACKING
BACK-UP RINGS
BELOW THREADS 2

1 Vee Stem

CHOICE OF VEE OR
10 20 30 40 50 60 70 80 90 100
REGULATING STEM TIP METAL-TO-METAL SPEEDBITE "W" CONNECTIONS
(EXCEPT 1/2" SPEEDBITE SW)
SEATING
% of rated Cv

To ensure proper fit use Autoclave tubing

Ordering Procedure
For complete information on available stem types, optional connections and additional valve options, see Needle Valve Options section or contact
your Sales Representative. 10V Series valves are furnished complete with connection components, unless otherwise specified.

Typical catalog number: 10V4071

10V 4 07 1 XX
Valve Outside Diameter Stem/Seat Body Options
Series Tube Size Type Pattern
For extreme
2-1/8 07 - non-rotating 1 - two-way straight
temperature and other
4-1/4 Vee stem (on-off service) 2 - two-way angle options, see Valve
6-3/8 08 - non-rotating 3 - three-way, two on pressure Options.
8-1/2 regulating stem (tapered tip
4 - three-way, one on pressure
for regulating and shutoff)
5 - three-way, two stem
87 - Vee stem with replaceable
Note: Contact Sales for 1/16tube size or manifold valve
seat
see MVE Series.
88 - Regulating stem with
replaceable seat

2 All general terms and conditions of sale, including limitations of our liability, apply to all products and services sold.
Valve Options Valve Maintenance
Extreme Temperatures Repair Kits: add R to the front of valve catalog
Standard Parker Autoclave valves with PTFE packing may be operated number for proper repair kit.
to 450F (232C). High temperature packing and/or extended stuffing (Example: R10V4071)
box is available for service from -100F (-73C) to 650F (343C) by Valve Bodies: Valve bodies are available. Order using the eight (8)
adding the following suffixes to catalog order number. digit part number found on the valve drawing or
TG standard valve with PTFE glass packing to 600F (316C). contact your Sales Representative for information.
GY standard valve with graphite braided yarn packing to 650F
Consult your Parker Autoclave Engineers representative for pricing on
(343C).
repair kits and valve bodies. Refer to the Tools, Installation, Operation
B standard valve with cryogenic trim materials and Telfon packing
and Maintenance section for proper maintenance procedures.
to -100F (-73C).
Parker Autoclave Engineers does not recommend compression sleeve con-
nections below -100F (-73C) or above 650F (343C). For additional valve
options, contact your Sales Representative.

Outside Dimensions - inches (mm) Block

Catalog Stem Diameter Orifice Thick- Valve
Number Type Tube Diameter A B C D D1 E F G G1 H* M N ness Pattern

2-Way Straight
10V2071 VEE 1/8** 0.094 1.50 0.75 0.31 1.06 0.81 1.38 3.00 0.62 0.17 3.75 0.56 0.31 0.62
10V2081 REG (3.18) (2.39) (38.10) (19.05) (7.87) (26.92) (20.57) (35.05) (76.20) (15.75) (4.32) (95.25) (14.22) (7.87) (15.75)
10V4071 VEE 1/4 0.125 2.00 1.00 0.56 1.19 1.69 3.00 0.97 0.22 4.44 0.69 0.38 1.00
10V4081 REG (6.35) (3.18) (50.80) (25.40) (14.22) (30.23) (42.93) (76.20) (24.64) (5.59) (112.78) (17.53) (9.65) (25.40) See
10V6071 VEE 3/8 0.125 2.00 1.00 0.62 1.19 1.69 3.00 0.97 0.22 4.31 0.69 0.38 1.00 Figure 1
10V6081 REG (9.53) (3.18) (50.80) (25.40) (15.75) (30.23) (42.93) (76.20) (24.64) (5.59) (109.47) (17.53) (9.65) (25.40)
10V8071 VEE 1/2 0.250 2.50 1.25 0.53 1.25 1.81 3.00 0.97 0.22 4.44 0.69 0.38 1.00
10V8081 REG (12.70) (6.35) (63.50) (31.75) (13.46) (31.75) (45.97) (76.20) (24.64) (5.59) (112.78) (17.53) (9.65) (25.40)

2-Way Angle
10V2072 VEE 1/8 0.094 1.50 0.75 0.31 0.81 1.56 3.00 0.62 0.17 3.94 0.56 0.31 0.62
10V2082 REG (3.18) (2.39) (38.1) (19.05) (7.87) (20.57) (39.62) (76.20) (15.75) (4.32) (100.08) (12.70) (7.87) (15.75)
10V4072 VEE 1/4 0.125 2.00 1.00 0.56 1.19 2.19 3.00 0.97 0.22 4.81 0.69 0.31 1.00
10V4082 REG (6.35) (3.18) (50.80) (25.40) (14.2) (30.23) (55.63) (76.20) (24.64) (5.59) (122.17) (17.53) (7.87) (25.40) See
10V6072 VEE 3/8 0.125 2.00 1.00 0.62 1.19 2.19 3.00 0.97 0.22 4.81 0.69 0.31 1.00 Figure 2
10V6082 REG (9.53) (3.18) (50.80) (25.40) (15.7) (30.23) (55.63) (76.20) (24.64) (5.59) (122.17) (17.53) (7.87) (25.40)
10V8072 VEE 1/2 0.250 2.50 1.25 0.53 1.25 2.50 3.00 0.97 0.22 5.06 0.69 0.38 1.00
10V8082 REG (12.70) (6.35) (63.50) (31.75) (13.5) (31.75) (63.50) (76.20) (24.64) (5.59) (128.52) (17.53) (9.65) (25.40)

3-Way / 2 on Pressure
10V2073 VEE 1/8** 0.094 1.50 0.75 0.31 1.06 0.81 1.69 3.00 0.62 0.17 4.06 0.56 0.31 0.62
10V2083 REG (3.18) (2.39) (38.10) (19.05) (7.87) (26.92) 20.57 (42.93) (76.20) (15.75) (4.32) (103.12) (12.70) (7.87) (15.75)
10V4073 VEE 1/4 0.125 2.00 1.00 0.56 1.19 2.19 3.00 0.97 0.22 4.81 0.69 0.38 1.00
10V4083 REG (6.35) (3.18) (50.80) (25.40) (14.22) (30.23) (55.63) (76.20) (24.64) (5.59) (122.17) (17.53) (9.65) (25.40) See
10V6073 VEE 3/8 0.125 2.00 1.00 0.62 1.19 2.19 3.00 0.97 0.22 4.81 0.69 0.38 1.00 Figure 3
10V6083 REG (9.53) (3.18) (50.80) (25.40) (15.75) (30.23) (55.63) (76.20) (24.64) (5.59) (122.17) (17.53) (9.65) (25.40)
10V8073 VEE 1/2 0.250 2.50 1.25 0.53 1.19 2.44 3.00 0.97 0.22 5.06 0.69 0.38 1.00
10V8083 REG
(12.70) (6.35) (63.50) (31.75) (13.46) (30.23) (61.98) (76.20) (24.64) (5.59) (128.52) (17.53) (9.65) (25.40)
G - Packing gland mounting hole drill size * H Dimension is with stem in closed position. For prompt service, Autoclave stocks
G1 - Bracket mounting hole size ** 1/8 straight and 3-Way/2 on pressure valves have offset select products. Consult factory.
Panel mounting drill size: 0.22 all valves. tube connections. All dimensions for reference only and subject to change.

Figure 1 Figure 2 Figure 3

F F F

M M G G1 M M
G1 G
M M G1 H N
G H
H N N
D D D1
C E E
D D1
E C C

B B B
A A A

2-Way Straight 2-Way Angle 3-Way / 2 on Pressure

All general terms and conditions of sale, including limitations of our liability, apply to all products and services sold. 3
Outside Dimensions - inches (mm) Block
Catalog Stem Diameter Orifice Thick- Valve
Number Type Tube Diameter A B C D D1 E F G G1 H* M N ness Pattern

3-Way / 1 on Pressure
10V2074 VEE 1/8 0.094 1.50 0.75 0.31 0.81 1.56 3.00 0.62 0.17 3.94 0.56 0.31 0.62
10V2084 REG (3.18) (2.39) (38.1) (19.05) (7.87) (20.57) (39.62) (76.20) (15.75) (4.32) (100.08) (12.70) (7.87) (15.7)
10V4074 VEE 1/4 0.125 2.00 1.00 0.56 1.19 2.19 3.00 0.97 0.22 4.81 0.69 0.38 1.00
10V4084 REG (6.35) (3.18) (50.8) (25.40) (14.22) (30.23) (55.63) (76.20) (24.64) (5.59) (122.17) (17.53) (9.65) (25.40) See
10V6074 VEE 3/8 0.125 2.00 1.00 0.62 1.19 2.19 3.00 0.97 0.22 4.81 0.69 0.38 1.00 Figure 4
10V6084 REG (9.53) (3.18) (50.8) (25.40) (15.75) (30.23) (55.63) (76.20) (24.64) (5.59) (122.17) (17.53) (9.65) (25.40)
10V8074 VEE 1/2 0.250 2.50 1.25 0.53 1.19 2.44 3.00 0.97 0.22 5.06 0.69 0.38 1.00
10V8084 REG (12.70) (6.35) (63.5) (31.75) (13.46) (30.23) (61.98) (76.20) (24.64) (5.59) (128.52) (17.53) (9.65) (25.40)
2-Way Angle / Replaceable Seat
10V2872 VEE 1/8 0.094 1.50 0.75 0.31 0.81 1.28 1.56 3.00 0.62 0.17 4.50 0.56 0.31 0.62
10V2882 REG (3.18) (2.39) (38.10) (19.05) (7.87) (20.57) (32.51) (39.62) (76.20) (15.75) (4.32) (114.30) (12.70) (7.87) (15.75)
10V4872 VEE 1/4 0.125 2.00 1.00 0.56 1.12 2.13 2.25 3.00 0.97 0.22 6.00 0.69 0.38 1.00
10V4882 REG (6.35) (3.18) (50.80) (25.40) (14.22) (28.45) (54.10) (57.15) (76.20) (24.64) (5.59) (152.40) (17.53) (9.65) (25.40) See
10V6872 VEE 3/8 0.125 2.00 1.00 0.62 1.12 2.28 2.25 3.00 0.97 0.22 6.00 0.69 0.38 1.00 Figure 5
10V6882 REG (9.53) (3.18) (50.80) (25.40) (15.75) (28.45) (57.91) (57.15) (76.20) (24.64) (5.59) (152.40) (17.53) (9.65) (25.40)
10V8872 VEE 1/2 0.250 2.50 1.25 0.53 1.00 2.50 2.38 3.00 0.97 0.28 6.06 0.69 0.38 1.00
10V8882 REG
(12.70) (6.35) (63.50) (31.75) (13.46) (25.45) (63.50) (60.45) (76.20) (24.64) (7.11) (153.92) (17.53) (9.65) (25.40)

3-Way / 2-Stem Manifold

10V2075 VEE 1/8 0.094 1.50 0.75 0.31 1.12 0.81 2.25 3.00 0.62 0.17 4.63 0.56 0.31 0.62
10V2085 REG (3.18) (2.39) (38.10) (19.05) (7.87) (28.45) (20.57) (57.15) (76.20) (15.75) (4.32) (117.60) (12.70) (7.87) (15.7)
10V4075 VEE 1/4 0.125 2.00 1.00 0.56 1.69 1.09 3.38 3.00 0.97 0.22 5.82 0.69 0.38 1.00
10V4085 REG (6.35) (3.18) (50.80) (25.40) (14.22) (42.93) (27.69) (85.85) (76.20) (24.64) (5.59) (147.83) (17.53) (9.65) (25.40) See
10V6075 VEE 3/8 0.125 2.00 1.00 0.62 1.69 1.09 3.38 3.00 0.97 0.22 5.82 0.69 0.38 1.00 Figure 6
10V6085 REG (9.53) (3.18) (50.80) (25.40) (15.75) (42.93) (27.69) (85.85) (76.20) (24.64) (5.59) (147.83) (17.53) (9.65) (25.40)
10V8075 VEE 1/2 0.250 2.50 1.25 0.53 1.69 1.03 3.38 3.00 0.97 0.22 5.82 0.69 0.38 1.00
10V8085 REG (12.70) (6.35) (63.50) (31.75) (13.46) (42.93) (26.16) (85.85) (76.20) (24.64) (5.59) (147.83) (17.53) (9.65) (25.40)

G - Packing gland mounting hole drill size * H Dimension is with stem in closed position. For prompt service, Autoclave
G1 - Bracket mounting hole size All dimensions for reference only and subject to change. stocks select products.
Panel mounting drill size: 0.22 all valves. Consult factory.

Figure 4 Figure 5 Figure 6

F F F

G1 M G1
G1 M M M
M M N G H N G
N G
H D D1
H D
D D E E
E C
D1
D1 C
C
B
C A
B B
A A

3-Way / 1 on Pressure 2-Way Angle / Replaceable Seat 3-Way / 2-Stem Manifold

4 All general terms and conditions of sale, including limitations of our liability, apply to all products and services sold.
Needle Valves - SW Series
Pressures to 15,000 psi (1034 bar)

Tube Pressure
Outside Rating
Diameter Orifice psi (bar)
Size Connection Size Rated @ Room
Inches Type Inches (mm) Cv* Temperature**

1/8 W125 Refer to 10V Series Valves

1/4 SW250 0.188 (4.77) 0.65 15,000 (1034)
3/8 SW375 0.250 (6.35) 0.95 15,000 (1034)
1/2 SW500 0.375 (9.52) 1.90 10,000 (690)

Notes:
* CV values shown are for 2-way straight valve pattern. For 2-way
angle patterns, increase CV value 50%. (Based on water)

** For complete temperature ratings see pressure/temperature rating

guide in Technical Information section.

Generalized Flow Coefficient Curves (Cv)

6
POWDER COATED
STAINLESS STEEL
HANDLE
LOW FRICTION
5
Number of turns open

ALUMINUM
BRONZE PACKING
GLAND

LOCKING DEVICE
4
Regulating Stem
ANTI-EXTRUSION
BACK-UP RINGS
NON-ROTATING 3
STEM

ADJUSTABLE PACKING
BELOW THREADS 2
COLD WORKED
TYPE 316 SS
BODY IN FIVE
PATTERNS 1 Vee Stem

SPEEDBITE "SW"
0
TUBE
CONNECTIONS
(except 1/8" 10 20 30 40 50 60 70 80 90 100
CHOICE OF VEE METAL-TO-METAL SpeedBite W)
OR REGULATING
% of rated Cv
SEATING
STEM TIP

To ensure proper fit use Autoclave tubing

Ordering Procedure
For complete information on available stem types, optional connections and additional valve options, see Needle Valve Options section or contact
your Sales Representative. SW Series valves are furnished complete with connection components, unless otherwise specified.

Typical catalog number: SW4071

SW 4 07 1 XX
Valve Outside Diameter Stem/Seat Body Options
Series Tube Size Type Pattern
For extreme
4-1/4 07 - non-rotating 1 - two-way straight
temperature and other
6-3/8 Vee stem (on off service) 2 - two-way angle options, see Valve
8-1/2 08 - non-rotating 3 - three-way, two on pressure Options.
regulating stem (tapered tip
4 - three-way, one on pressure
for regulating and shutoff)
5 - three-way, two stem
87 - Vee stem with replaceable
manifold valve
seat
88 - Regulating stem with
replaceable seat

All general terms and conditions of sale, including limitations of our liability, apply to all products and services sold. 5
Valve Options Valve Maintenance
Extreme Temperatures Repair Kits: add R to the front of valve catalog
Standard Parker Autoclave valves with PTFE packing may be oper- number for proper repair kit.
ated to 450F (232C). High temperature packing and/or extended (Example: RSW4071)
stuffing box are available for service from -100F (-73C) to 650F Valve Bodies: Valve bodies are available. Order using the eight (8)
(343C) by adding the following suffixes to catalog order number. digit part number found on the valve drawing or
TG standard valve with PTFE glass packing to 600F (316C). contact your Sales Representative for information.
GY standard valve with graphite braided yarn packing to 650F
(343C).
B standard valve with cryogenic trim materials and Telfon packing Consult your Parker Autoclave Engineers representative for pricing on
to -100F (-73C). repair kits and valve bodies. Refer to the Tools, Installation, Operation
and Maintenance section for proper maintenance procedures.
Parker Autoclave Engineers does not recommend compression sleeve con-
nections below -100F (-73C) or above 650F (343C). For additional valve
options, contact your Sales Representative.

Outside Dimensions - inches (mm) Block

Catalog Stem Diameter Orifice Thick- Valve
Number Type Tube Diameter A B C D D1 E F G G1 H* M N ness Pattern

2-Way Straight
SW4071 VEE 1/4 0.187 2.00 1.00 0.38 1.62 1.19 2.00 3.00 0.75 0.22 4.50 0.62 0.38 0.75
SW4081 REG (6.35) (4.75) (50.80) (25.40) (9.65) (41.15) (30.23) (50.80) (76.20) (19.05) (5.59) (114.30) (15.75) (9.65) (19.05)
SW6071 VEE 3/8 0.250 2.00 1.00 0.47 1.62 1.19 2.00 3.00 0.75 0.22 4.50 0.62 0.38 0.75 See
SW6081 REG (9.53) (6.35) (50.80) (25.40) (11.94) (41.15) (30.23) (50.80) (76.20) (19.05) (5.59) (114.30) (15.75) (9.65) (19.05) Figure 1
SW8071 VEE 1/2 0.375 2.50 1.25 0.53 2.38 1.75 2.88 4.00 1.00 0.34 5.95 0.69 0.50 1.00
SW8081 REG (12.70) (9.53) (63.50) (31.75) (13.46) (60.45) (44.45) (73.15) (101.60) (25.40) (8.64) (151.37) (17.53) (12.70) (25.40)

2-Way Angle
SW4072 VEE 1/4 0.187 2.00 1.00 0.38 1.19 2.43 3.00 0.75 0.22 5.00 0.62 0.38 0.75
SW4082 REG (6.35) (4.75) (50.80) (25.40) (9.65) (30.23) (61.72) (76.20) (19.05) (5.59) (127.00) (15.75) (9.65) (19.05)
SW6072 VEE 3/8 0.250 2.00 1.00 0.47 1.19 2.19 3.00 0.75 0.22 5.00 0.62 0.38 0.75 See
SW6082 REG (9.53) (6.35) (50.80) (25.40) (11.94) (30.23) (55.63) (76.20) (19.05) (5.59) (127.00) (15.75) (9.65) (19.05) Figure 2
SW8072 VEE 1/2 0.375 2.50 1.25 0.53 1.75 3.38 4.00 1.00 0.34 6.45 0.69 0.50 1.00
SW8082 REG (12.70) (9.53) (63.50) (31.75) (13.46) (44.45) (85.85) (101.60) (25.40) (8.64) (163.83) (17.53) (12.70) (25.40)

3-Way / 2 on Pressure
SW4073 VEE 1/4 0.187 2.00 1.00 0.38 1.62 1.19 2.62 3.00 0.75 0.22 5.18 0.62 0.38 0.75
SW4083 REG (6.35) (4.75) (50.80) (25.40) (9.65) (41.15) (30.23) (66.55) (76.20) (19.05) (5.59) (131.57) (15.75) (9.65) (19.05)
SW6073 VEE 3/8 0.250 2.00 1.00 0.47 1.62 1.19 2.62 3.00 0.75 0.22 5.13 0.62 0.38 0.75 See
SW6083 REG (9.53) (6.35) (50.80) (25.40) (11.94) (41.15) (30.23) (66.55) (76.20) (19.05) (5.59) (130.30) (15.75) (9.65) (19.05) Figure 3
SW8073 VEE 1/2 0.375 2.50 1.25 0.53 2.38 1.75 3.62 4.00 1.00 0.34 6.70 0.69 0.50 1.00
SW8083 REG (12.70) (9.53) (63.50) (31.75) (13.46) (60.45) (44.45) (91.95) (101.60) (25.40) (8.64) (170.18) (17.53) (12.70) (25.40)

G - Packing gland mounting hole drill size * H Dimension is with stem in closed position. For prompt service, Autoclave stocks
G1 - Bracket mounting hole size All dimensions for reference only and subject to change. select products. Consult factory.
Panel mounting drill size: 0.22 all valves.

Figure 1 Figure 2 Figure 3

F F F

G1 M M M G1 M M
M G G
G1 H N
H N G
N
H D D1
D
D1
D E E
E C
C C
B B
A B A
A
2-Way Straight 2-Way Angle 3-Way / 2 on Pressure

6 All general terms and conditions of sale, including limitations of our liability, apply to all products and services sold.
Outside Dimensions -inches (mm) Block
Catalog Stem Diameter Orifice Thick- Valve
Number Type Tube Diameter A B C D D1 E F G G1 H* M N ness Pattern

3-Way / 1 on Pressure
SW4074 VEE 1/4 0.187 2.00 1.00 0.38 1.19 2.43 3.00 0.75 0.22 5.00 0.62 0.38 0.75
SW4084 REG (6.35) (4.75) (50.80) (25.40) (9.65) (30.23) (61.72) (76.20) (19.05) (5.59) (127.00) (15.75) (9.65) (19.05)
SW6074 VEE 3/8 0.250 2.00 1.00 0.47 1.19 2.43 3.00 0.75 0.22 5.00 0.62 0.38 0.75 See
SW6084 REG (9.53) (6.35) (50.80) (25.40) (11.94) (30.23) (61.72) (76.20) (19.05) (5.59) (127.00) (15.75) (9.65) (19.05) Figure 4
SW8074 VEE 1/2 0.375 2.50 1.25 0.53 1.75 3.38 4.00 1.00 0.34 6.45 0.69 0.50 1.00
SW8084 REG (12.70) (9.53) (63.50) (31.75) (13.46) (44.45) (85.85) (101.60) (25.40) (8.64) (163.83) (17.53) (12.70) (25.40)

2-Way Angle / Replaceable Seat

SW4872 VEE 1/4 0.187 2.00 1.00 0.38 1.19 1.88 2.25 3.00 0.75 0.22 5.75 0.62 0.38 0.75
SW4882 REG (6.35) (4.75) (50.80) (25.40) (9.65) (30.23) (47.75) (57.15) (76.20) (19.05) (5.59) (146.05) (15.75) (9.65) (19.05)
SW6872 VEE 3/8 0.250 2.00 1.00 0.47 1.19 2.19 2.25 3.00 0.75 0.22 5.75 0.62 0.38 0.75 See
SW6882 REG (9.53) (6.35) (50.80) (25.40) (11.94) (30.23) (55.62) (57.15) (76.20) (19.05) (5.59) (146.05) (15.75) (9.65) (19.05) Figure 5
SW8872 VEE 1/2 0.375 2.50 1.25 0.53 1.75 2.50 3.25 4.00 1.00 0.34 7.51 0.69 0.50 1.00
SW8882 REG (12.70) (9.53) (63.50) (31.75) (13.46) (44.45) (63.50) (82.55) (101.60) (25.40) (8.64) (190.75) (17.53) (12.70) (25.40)

3-Way / 2-Stem Manifold

SW4075 VEE 1/4 0.187 2.00 1.00 0.38 1.68 1.19 3.38 3.00 0.75 0.22 5.94 0.62 0.38 0.75
SW4085 REG (6.35) (4.75) (50.80) (25.40) (9.65) (42.67) (30.23) (85.85) (76.20) (19.05) (5.59) (150.88) (15.75) (9.65) (19.05)
SW6075 VEE 3/8 0.250 2.00 1.00 0.47 1.68 1.19 3.38 3.00 0.75 0.22 5.94 0.62 0.38 0.75 See
SW6085 REG (9.53) (6.35) (50.80) (25.40) (11.94) (42.67) (30.23) (85.85) (76.20) (19.05) (5.59) (150.88) (15.75) (9.65) (19.05) Figure 6
SW8075 VEE 1/2 0.375 2.50 1.25 0.53 2.56 1.75 5.12 4.00 1.00 0.34 8.20 0.69 0.50 1.00
SW8085 REG (12.70) (9.53) (63.50) (31.75) (13.46) (65.02) (44.45) (130.05) (101.60) (25.40) (8.64) (208.28) (17.53) (12.70) (25.40)

G - Packing gland mounting hole drill size * H Dimension is with stem in closed position. For prompt service, Autoclave
G1 - Bracket mounting hole size All dimensions for reference only and subject to change. stocks select products. Consult
Panel mounting drill size: 0.22 all valves. factory.

Figure 4 Figure 5 Figure 6

F F
F

G1 M G1
G1 M M M
M M G G
N H N
H N G
D D1
H D
D D E
E
E C
D1
D1
C
B C
C A
B B
A A

3-Way / 1 on Pressure 2-Way Angle / Replaceable Seat 3-Way / 2-Stem Manifold

All general terms and conditions of sale, including limitations of our liability, apply to all products and services sold.

All general terms and conditions of sale, including limitations of our liability, apply to all products and services sold. 7
WARNING
FAILURE, IMPROPER SELECTION OR IMPROPER USE OF THE PRODUCTS AND/OR SYSTEMS DESCRIBED HEREIN OR RELATED ITEMS CAN CAUSE DEATH, PERSONAL INJURY
AND PROPERTY DAMAGE.
This document and other information from Parker Hannifin Corporation, its subsidiaries and authorized distributors provide product and/or system options for further investiga-
tion by users having technical expertise. It is important that you analyze all aspects of your application and review the information concerning the product or system in the current
product catalog. Due to the variety of operating conditions and applications for these products or systems, the user, through its own analysis and testing, is solely responsible
for making the final selection of the products and systems and assuring that all performance, safety and warning requirements of the application are met. The products described
herein, including without limitation, product features, specifications, designs, availability and pricing, are subject to change by Parker Hannifin Corporation and its subsidiaries at
any time without notice.

Offer of Sale
The items described in this document are available for sale by Parker Hannifin Corporation, its subsidiaries or its authorized distributors. Any sale contract entered by Parker will be
governed by the provisions stated in Parker's standard terms and conditions of sale (copy available upon request).

2013 Parker Hannifin Corporation | Autoclave Engineers is a registered trademark of the Parker Hannifin Corporation 02-0102SE January2013

Caution! Do not mix or interchange parts or tubing with those of

other manufacturers. Doing so is unsafe and will void warranty.

15SM Series
Pressures to 15,000 psi (1034 bar)

Since 1945 Parker Autoclave Engineers has designed

and built premium quality valves, fittings and tubing.
This commitment to engineering and manufacturing
excellence has earned Parker Autoclave Engineers a
reputation for reliable efficient product performance.
Parker Autoclave Engineers has long been established
as the world leader in high pressure fluid handling
components for the chemical/petrochemical, waterblast,
research, and oil and gas industries.

Medium Pressure Valve Features:

Largest-port valve available for medium pressure

applications.
Tubing size 1-1/2".
Rising stem/barstock body design.
Non-rotating stem prevents stem/seat galling.
New one piece stem design permits ease of assembly and packing replacement.
Metal-to-metal seating achieves bubble-tight shut-off, longer stem/seat life in abrasive
flow, greater durability for repeated on/off cycles and excellent corrosion resistance.
PTFE encapsulated packing provides dependable stem and body sealing.
Stem sleeve and packing gland materials have been selected to achieve extended thread

Needle Valves - SM Series

cycle life and reduced handle torque.
Choice of Vee or Regulating stem tip.
Available in two body patterns.
Parker Autoclave Engineers valves are complemented by a complete line of fittings and tubing.
The SM Series uses Parker Autoclave Engineers' Medium pressure coned and threaded
connection.
Medium Pressure

www.autoclave.com
Needle Valves - 15SM Series
Pressures to 15,000 psi (1034 bar)

Tube Pressure
Outside Rating
Diameter Orifice psi (bar)
Size Connection Size Rated @ Room
Inches Type Inches (mm) Cv* Temperature**

1-1/2 SF1500CX .937 (23.80) 14 15,000 (1034)

Notes:
* CV values shown are for 2-way straight valve pattern. For 2-way
angle patterns, increase CV value 50%. (Based on water)

** For complete temperature ratings see pressure/temperature rating

guide in Technical Information section.

Generalized Flow Coefficient Curves (Cv)

6
STAINLESS STEEL
T-HANDLE
5 Regulating Stem
Number of turns open

LOW FRICTION

T
ALUMINUM

NO ABLE
BRONZE PACKING
GLAND 4

AIL
3

V
ANTI-EXTRUSION
NON-ROTATING

A
BACK-UP RINGS
STEM
2
ADJUSTABLE PACKING
BELOW THREADS
COLD WORKED
TYPE 316 SS 1 Vee Stem
BODY IN TWO
PATTERNS

0
10 20 30 40 50 60 70 80 90 100
HIGH PRESSURE
CONED AND
THREADED
CONNECTIONS
CHOICE OF VEE
OR REGULATING
METAL-TO-METAL
SEATING % of rated Cv
STEM TIP

To ensure proper fit use Parker Autoclave tubing

Ordering Procedure
For complete information on available stem types, optional connections and additional valve options, see Needle Valve Options section or contact
your Sales Representative. 15SM Series valves are furnished complete with connection components, unless otherwise specified.

Typical catalog number: 15SM24071

15SM 24 07 1 XX
Valve Outside Diameter Stem/Seat Body Options
Series Tube Size Type Pattern
For extreme
24-1-1/2 07 - non-rotating 1 - two-way straight
temperature and other
Vee stem (on-off service) 2 - two-way angle options, see
08 - non-rotating Valve Options.
regulating stem (tapered tip
for regulating and shutoff)

2 All general terms and conditions of sale, including limitations of our liability, apply to all products and services sold.
Valve Options Valve Maintenance
Extreme Temperatures Repair Kits: add R to the front of valve catalog
Standard Parker Autoclave Engineers valves with PTFE packing may number for proper repair kit.
be operated from 0F (-17.8C) to 450F (232C). High temperature (Example: R15SM24071)
packing and/or extended stuffing box are available for service from Valve Bodies: Valve bodies are available. Order using the eight (8)
-423F (-252C) to 1200F (649C) by adding the following suffixes digit part number found on the valve drawing or
to catalog order number. contact your Sales Representative for information.
TG standard valve with PTFE glass packing to 600F (316C).
GY standard valve with graphite braided yarn packing to 800F (427C).
Consult your Parker Autoclave Engineers representative for pricing on repair
Note: Contact factory for pressure ratings using graphite yarn packing.
kits and valve bodies. Refer to the Tools, Installation, Operation and Mainte-
HT extended stuffing box valve with graphite braided yarn packing nance section for proper maintenance procedures.
to 1200F (649C).
B standard valve with cryogenic trim materials and PTFE packing to
-100F (-73C). Note: Caution should be exercised in proper selection of medium pressure tub-
ing based on actual operating conditions. Two tubing series available in some
LT extended stuffing box valve with PTFE packing and cryogenic trim
sizes: 15,000 psi (1034 bar) and 20,000 psi (1380 bar).
materials to -423F (-252C).
K anti-vibration collet and gland assembly

See needle valve options for stem and seat coating for erosive service.

Dimensions - inches (mm) Block Fitting

Catalog Stem Pipe Orifice
Type Size Dia. Thick- Pattern
Number A B C D D 1
E F G G H M N 1
ness

2-Way Straight
15SM24071 VEE 1-1/2 0.937 5.75 2.88 1.00 5.25 3.75 6.38 23.75 0.75 10.98 1.88 1.50 2.25 See
15SM24081 REG (38.10) (23.80) (146.05) (73.03) (25.40) (133.35) (95.25) (161.93) (603.25) (19.05) (278.79) (47.63) (38.10) (57.15) Fig. 1

2-Way Angle
15SM24072 VEE 1-1/2 0.937 5.75 2.88 1.00 3.75 6.75 23.75 0.75 11.35 1.88 1.50 2.25 See
15SM24082 REG (38.10) (23.80) (146.05) (73.03) (25.40) (95.25) (171.45) (603.25) (19.05) (288.32) (47.63) (38.10) (57.15) Fig. 2
G - Packing gland mounting hole drill size * H Dimension is with stem in closed position. For prompt service, Parker
G1 - Bracket mounting hole size All dimensions for reference only and subject to change. Autoclave Engineers stock select
Panel mounting drill size: 0.75 all valves. products. Consult factory.

Figure 1 Figure 2
F
F
G1 M M
G1 M M N
H N
H D
D1 E
D
E
C C

B
A B
A

2-Way Straight 2-Way Angle

All general terms and conditions of sale, including limitations of our liability, apply to all products and services sold. 3
WARNING
FAILURE, IMPROPER SELECTION OR IMPROPER USE OF THE PRODUCTS AND/OR SYSTEMS DESCRIBED HEREIN OR RELATED ITEMS CAN CAUSE DEATH, PERSONAL INJURY AND PROPERTY DAMAGE.
This document and other information from Parker Hannifin Corporation, its subsidiaries and authorized distributors provide product and/or system options for further investigation by users having technical
expertise. It is important that you analyze all aspects of your application and review the information concerning the product or system in the current product catalog. Due to the variety of operating conditions
and applications for these products or systems, the user, through its own analysis and testing, is solely responsible for making the final selection of the products and systems and assuring that all performance,
safety and warning requirements of the application are met. The products described herein, including without limitation, product features, specifications, designs, availability and pricing, are subject to change by
Parker Hannifin Corporation and its subsidiaries at any time without notice.

Offer of Sale
The items described in this document are available for sale by Parker Hannifin Corporation, its subsidiaries or its authorized distributors. Any sale contract entered by Parker will be governed by the provisions
stated in Parker's standard terms and conditions of sale (copy available upon request).

2013 Parker Hannifin Corporation | Autoclave Engineers is a registered trademark of the Parker Hannifin Corporation 02-9225BE January2013

Caution! Do not mix or interchange parts or tubing with those of

other manufacturers. Doing so is unsafe and will void warranty.

SM Series
Pressures to 20,000 psi (1379 bar)

Since 1945 Parker Autoclave Engineers has designed

Medium Pressure Valve Features:

Largest-port valves available for medium pressure

applications.
Tubing sizes available from 1/4 to 1.
Rising stem/barstock body design.
Non-rotating stem prevents stem/seat galling.
New one piece stem design permits ease of assembly and packing replacement.
Metal-to-metal seating achieves bubble-tight shut-off, longer stem/seat life in abrasive
flow, greater durability for repeated on/off cycles and excellent corrosion resistance.
PTFE encapsulated packing provides dependable stem and body sealing.
Stem sleeve and packing gland materials have been selected to achieve extended thread

Needle Valves - SM Series

cycle life and reduced handle torque.
Choice of Vee or Regulating stem tip.
Available in five body patterns.
Parker Autoclave Engineers valves are complemented by a complete line of fittings, tubing,
check valves and line filters. The SM Series uses Parker Autoclave Engineers Medium pressure
connection. The coned-and-threaded connection features orifice sizes to match the high flow
characteristics of this series.

Note: SM Series replaces 20SC Series.

Medium Pressure

www.autoclave.com
Needle Valves - SM Series
Pressures to 20,000 psi (1379 bar)

Tube Pressure
Outside Rating
Diameter Orifice psi (bar)
Size Connection Size Rated @ Room
Inches Type Inches (mm) Cv* Temperature**

1/4 SF250CX20 0.125 (3.18) 0.31 20,000 (1379)

3/8 SF375CX20 0.219 (5.56) 0.75 20,000 (1379)
9/16 SF562CX20 0.312 (7.92) 1.30 20,000 (1379)
3/4 SF750CX20 0.438 (11.13) 2.50 20,000 (1379)
1 SF1000CX20 0.562 (14.27) 4.40 20,000 (1379)
9/16 SF562CX10 0.359 (9.12) 1.75 10,000 (690)
3/4 SF750CX10 0.516 (13.10) 2.80 10,000 (690)
1 SF1000CX10 0.688 (17.48) 5.20 10,000 (690)

Notes:
* CV values shown are for 2-way straight valve pattern. For 2-way
angle patterns, increase CV value 50%. (Based on water)

** For complete temperature ratings see pressure/temperature rating

guide in Technical Information section.

Generalized Flow Coefficient Curves (Cv)

6
POWDER COATED
STAINLESS STEEL
HANDLE 5 Regulating Stem
Number of turns open

LOW FRICTION
ALUMINUM ONE PIECE NON-ROTATING
BRONZE PACKING STEM
GLAND
4
LOCKING DEVICE

3
ANTI-EXTRUSION
BACK-UP RINGS

ADJUSTABLE PACKING
2
BELOW THREADS
COLD WORKED
TYPE 316 SS
BODY IN FIVE
1 Vee Stem
PATTERNS

0
MEDIUM
PRESSURE
CONED-AND-THR
10 20 30 40 50 60 70 80 90 100
EADED
CHOICE OF VEE
OR REGULATING
METAL-TO-METAL
SEATING
CONNECTIONS
% of rated Cv
STEM TIP

To ensure proper fit use Autoclave tubing

Ordering Procedure
For complete information on available stem types, optional connections and additional valve options, see Needle Valve Options section or contact
your Sales Representative. 10SM and 20SM Series valves are furnished complete with connection components, unless otherwise specified.

Typical catalog number: 20SM4071

20SM 4 07 1 XX
Valve Outside Diameter Stem/Seat Body Options
Series Tube Size Type Pattern
For extreme
4-1/4 07 - non-rotating 1 - two-way straight
temperature and other
10SM 6-3/8 Vee stem (on-off service) 2 - two-way angle options, see
20SM 9-9/16 08 - non-rotating 3 - three-way, two on pressure Valve Options.
12-3/4 regulating stem (tapered tip
4 - three-way, one on pressure
16-1 for regulating and shutoff)
5 - three-way, two stem
87 - Vee stem with replaceable seat
manifold valve
88 - Regulating stem with replaceable seat

2 All general terms and conditions of sale, including limitations of our liability, apply to all products and services sold.
Valve Options Valve Maintenance
Extreme Temperatures Repair Kits: add R to the front of valve catalog
Standard Parker Autoclave Engineers valves with PTFE packing may number for proper repair kit.
be operated from 0F (-17.8C) to 450F (232C). High temperature (Example: R20SM4071)
packing and/or extended stuffing box are available for service from Valve Bodies: Valve bodies are available. Order using the eight (8)
-423F (-252C) to 1200F (649C) by adding the following suffixes digit part number found on the valve drawing or
to catalog order number. contact your Sales Representative for information.
TG standard valve with PTFE glass packing to 600F (316C).
GY standard valve with graphite braided yarn packing to 800F (427C).
Consult your Parker Autoclave Engineersrepresentative for pricing on repair kits
Note: 3/4 rated 8000 psi (552 bar) and 1 rated 6000 psi (412 bar) maxi-
and valve bodies. Refer to the Tools, Installation, Operation and Maintenance
mum with graphite yarn packing. section for proper maintenance procedures.
HT extended stuffing box valve with graphite braided yarn packing
to 1200F (649C).
Note: Caution should be exercised in proper selection of medium pressure
B standard valve with cryogenic trim materials and PTFE packing to
tubing based on actual operating conditions. Two tubing series available in
-100F (-73C). some sizes: 15,000 psi (1034 bar) and 20,000 psi (1380 bar).
LT extended stuffing box valve with PTFE packing and cryogenic trim
materials to -423F (-252C).
K anti-vibration collet and gland assembly

See needle valve options for stem and seat coating for erosive service.

Outside Dimensions - inches (mm) Block

Catalog Stem Diameter Orifice Thick- Valve
Number Type Tube Diameter A B C D D1 E F G G1 H* M N ness Pattern

2-Way Straight
20SM4071 VEE 1/4 0.125 2.00 1.00 0.38 1.62 1.19 2.00 3.00 0.75 0.22 4.69 0.62 0.38 0.75
20SM4081 REG (6.35) (3.18) (50.80) (25.40) (9.65) (41.15) (30.23) (50.80) (76.20) (19.05) (5.59) (119.13) (15.75) (9.65) (19.05)
20SM6071 VEE 3/8 0.219 2.00 1.00 0.47 1.62 1.19 2.00 3.00 0.75 0.22 4.63 0.62 0.38 0.75
20SM6081 REG (9.53) (5.56) (50.80) (25.40) (11.94) (41.15) (30.23) (50.80) (76.20) (19.05) (5.59) (117.48) (15.75) (9.65) (19.05)
20SM9071 VEE 9/16 0.312 2.50 1.25 0.53 2.38 1.75 2.88 4.00 1.00 0.34 5.93 0.69 0.50 1.00
20SM9081 REG (14.29) (7.92) (63.50) (31.75) (13.46) (60.45) (44.45) (73.15) (101.60) (25.40) (8.64) (150.86) (17.53) (12.70) (25.40)
20SM12071 VEE 3/4 0.438 3.00 1.50 0.62 3.00 2.25 3.75 10.25 1.12 0.44 7.00 0.88 0.63 1.38
See
20SM12081 REG (19.05) (11.13) (76.20) (38.10) (15.75) (76.20) (57.15) (95.25) (260.35) (28.45) (11.18) (177.80) (22.35) (16.00) (35.05)
Figure 1
20SM16071 VEE 1 0.562 4.12 2.06 0.63 3.75 2.81 4.63 10.25 1.62 0.56 9.00 1.25 1.13 1.75
20SM16081 REG (25.40) (14.27) (104.65) (52.32) (16.00) (95.25) (71.37) (117.60) (260.35) (41.15) (14.22) (228.84) (31.75) (28.70) (44.4 5)
10SM9071 VEE 9/16 0.359 2.50 1.25 0.53 2.38 1.75 2.88 4.00 1.00 0.34 5.93 0.69 0.50 1.00
10SM9081 REG (14.29) (9.12) (63.50) (31.75) (13.46) (60.45) (44.45) (73.15) (101.60) (25.40) (8.64) (150.86) (17.53) (12.70) (25.40)
10SM12071 VEE 3/4 0.516 3.00 1.50 0.62 3.00 2.25 3.75 10.25 1.12 0.44 7.00 0.88 0.63 1.38
10SM12081 REG (19.05) (13.11) (76.20) (38.10) (15.75) (76.20) (57.15) (95.25) (260.35) (28.45) (11.18) (177.80) (22.35) (16.00) (35.05)
10SM16071 VEE 1 0.688 4.12 2.06 0.63 3.75 2.81 4.63 10.25 1.62 0.56 9.00 1.25 1.13 1.75
10SM16081 REG (25.40) (17.48) (104.65) (52.32) (16.00) (95.25) (71.37) (117.60) (260.35) (41.15) (14.22) (228.84) (31.75) (28.70) (44.45)

G - Packing gland mounting hole drill size * H Dimension is with stem in closed position. For prompt service, Parker
G1 - Bracket mounting hole size All dimensions for reference only and subject to change. Autoclave Engineers stock
Panel mounting drill size: 0.22 all valves. select products.
Consult factory.

Figure 1
F

G1 M M
H N G

D1
D
E
C
B
A
2-Way Straight

2-Way Angle
20SM4072 VEE 1/4 0.125 2.00 1.00 0.38 1.19 2.44 3.00 0.75 0.22 4.81 0.62 0.38 0.75
20SM4082 REG (6.35) (3.18) (50.80) (25.40) (9.65) (30.23) (61.90) (76.20) (19.05) (5.59) (122.25) (15.75) (9.65) (19.05)
20SM6072 VEE 3/8 0.219 2.00 1.00 0.47 1.19 2.44 3.00 0.75 0.22 4.81 0.62 0.38 0.75
20SM6082 REG (9.53) (5.56) (50.80) (25.40) (11.94) (30.23) (61.90) (76.20) (19.05) (5.59) (122.25) (15.75) (9.65) (19.05)
20SM9072 VEE 9/16 0.312 2.50 1.25 0.53 1.75 3.38 4.00 1.00 0.34 6.43 0.69 0.50 1.00
20SM9082 REG (14.29) (7.92) (63.50) (31.75) (13.46) (44.45) (85.85) (101.60) (25.40) (8.64) (163.56) (17.53) (12.70) (25.40)
20SM12072 VEE 3/4 0.438 3.00 1.50 0.62 2.25 4.25 10.25 1.12 0.44 7.50 0.88 0.63 1.38
See
20SM12082 REG (19.05) (11.13) (76.20) (38.10) (15.75) (57.15) (107.95) (260.35) (28.45) (11.18) (190.50) (22.35) (16.00) (35.05)
Figure 2
20SM16072 VEE 1 0.562 4.12 2.06 0.63 2.81 5.12 10.25 1.62 0.56 9.00 1.25 1.13 1.75
20SM16082 REG (25.40) (14.27) (104.65) (52.32) (16.00) (71.37) (130.05) (260.35) (41.15) (14.22) (228.84) (31.75) (28.70) (44.4 5)
10SM9072 VEE 9/16 0.359 2.50 1.25 0.53 1.75 3.38 4.00 1.00 0.34 6.43 0.69 0.50 1.00
10SM9082 REG (14.29) (9.12) (63.50) (31.75) (13.46) (44.45) (85.85) (101.60) (25.40) (8.64) (163.56) (17.53) (12.70) (25.40)
10SM12072 VEE 3/4 0.516 3.00 1.50 0.62 2.25 4.25 10.25 1.12 0.44 7.50 0.88 0.63 1.38
10SM12082 REG (19.03) (13.11) (76.20) (38.10) (15.75) (57.15) (107.95) (260.35) (28.45) (11.18) (190.50) (22.35) (16.00) (35.05)
10SM16072 VEE 1 0.688 4.12 2.06 0.63 2.81 5.12 10.25 1.62 0.56 9.00 1.25 1.13 1.75
10SM16082 REG (25.40) (17.48) (104.65) (52.32) (16.00) (71.37) (130.05) (260.35) (41.15) (14.22) (228.84) (31.75) (28.70) (44.45)

3-Way / 2 on Pressure
20SM4073 VEE 1/4 0.125 2.00 1.00 0.38 1.63 1.19 2.63 3.00 0.75 0.22 5.00 0.62 0.38 0.75
20SM4083 REG (6.35) (3.18) (50.80) (25.40) (9.65) (41.28) (30.23) (66.68) (76.20) (19.05) (5.59) (127.00) (15.75) (9.65) (19.05)
20SM6073 VEE 3/8 0.219 2.00 1.00 0.47 1.63 1.19 2.63 3.00 0.75 0.22 5.00 0.62 0.38 0.75
20SM6083 REG (9.53) (5.56) (50.80) (25.40) (11.94) (41.28) (30.23) (66.68) (76.20) (19.05) (5.59) (127.00) (15.75) (9.65) (19.05)
20SM9073 VEE 9/16 0.312 2.50 1.25 0.53 2.38 1.75 3.63 4.00 1.00 0.34 6.51 0.69 0.50 1.00
20SM9083 REG (14.29) (7.92) (63.50) (31.75) (13.46) (60.45) (44.45) (92.08) (101.60) (25.40) (8.64) (165.59) (17.53) (12.70) (25.40)
20SM12073 VEE 3/4 0.438 3.00 1.50 0.62 3.00 2.25 4.63 10.25 1.12 0.44 7.88 0.88 0.63 1.38
See
20SM12083 REG (19.05) (11.13) (76.20) (38.10) (15.75) (76.20) (57.15) (117.48) (260.35) (28.45) (11.18) (200.03) (22.35) (16.00) (35.05)
Figure 3
20SM16073 VEE 1 0.562 4.12 2.06 0.63 3.75 2.81 5.88 10.25 1.62 0.56 9.75 1.25 1.13 1.75
20SM16083 REG (25.40) (14.27) (104.65) (52.32) (16.00) (95.25) (71.37) (149.35) (260.35) (41.15) (14.22) (247.89) (31.75) (28.70) (44.4 5)
10SM9073 VEE 9/16 0.359 2.50 1.25 0.53 2.38 1.75 3.63 4.00 1.00 0.34 6.52 0.69 0.50 1.00
10SM9083 REG (14.29) (9.12) (63.50) (31.75) (13.46) (60.45) (44.45) (92.08) (101.60) (25.40) (8.64) (165.59) (17.53) (12.70) (25.40)
10SM12073 VEE 3/4 0.516 3.00 1.50 0.62 3.00 2.25 4.63 10.25 1.12 0.44 7.88 0.88 0.63 1.38
10SM12083 REG (19.03) (13.11) (76.20) (38.10) (15.75) (76.20) (57.15) (117.48) (260.35) (28.45) (11.18) (200.03) (22.35) (16.00) (35.05)
10SM16073 VEE 1 0.688 4.12 2.06 0.63 3.75 2.81 5.88 10.25 1.62 0.56 9.75 1.25 1.13 1.75
10SM16083 REG (25.40) (17.48) (104.65) (52.32) (16.00) (95.25) (71.37) (149.35) (260.35) (41.15) (14.22) (247.89) (31.75) (28.70) (44.45)

Figure 2 Figure 3
F F

M M G1 M M
G G
G1 H N
N
H D D1
D
E E
C
C

B B
A A
2-Way Angle 3-Way / 2 on Pressure

4 All general terms and conditions of sale, including limitations of our liability, apply to all products and services sold.
Outside Dimensions - inches (mm) Block
Catalog Stem Diameter Orifice Thick- Valve
Number Type Tube Diameter A B C D D1 E F G G1 H* M N ness Pattern

3-Way / 1 on Pressure
20SM4074 VEE 1/4 0.125 2.00 1.00 0.38 1.19 2.44 3.00 0.75 0.22 4.81 0.62 0.38 0.75
20SM4084 REG (6.35) (3.18) (50.80) (25.40) (9.65) (30.23) (61.90) (76.20) (19.05) (5.59) (122.25) (15.75) (9.65) (19.05)
20SM6074 VEE 3/8 0.219 2.00 1.00 0.47 1.19 2.44 3.00 0.75 0.22 4.81 0.62 0.38 0.75
20SM6084 REG (9.53) (5.56) (50.80) (25.40) (11.94) (30.23) (61.90) (76.20) (19.05) (5.59) (122.25) (15.75) (9.65) (19.05)
20SM9074 VEE 9/16 0.312 2.50 1.25 0.53 1.75 3.38 4.00 1.00 0.34 6.31 0.69 0.50 1.00
20SM9084 REG (14.29) (7.92) (63.50) (31.75) (13.46) (44.45) (85.85) (101.60) (25.40) (8.64) (160.56) (17.53) (12.70) (25.40)
20SM12074 VEE 3/4 0.438 3.00 1.50 0.62 2.25 4.25 10.25 1.12 0.44 7.50 0.88 0.63 1.38
20SM12084 REG See
(19.05) (11.13) (76.20) (38.10) (15.75) (57.15) (107.95) (260.35) (28.45) (11.18) (190.50) (22.35) (16.00) (35.05)
Figure 4
20SM16074 VEE 1 0.562 4.12 2.06 0.63 2.81 5.12 10.25 1.62 0.56 9.09 1.25 1.13 1.75
20SM16084 REG (25.40) (14.27) (104.65) (52.32) (16.00) (71.37) (130.05) (260.35) (41.15) (14.22) (231.13) (31.75) (28.70) (44.4 5)
10SM9074 VEE 9/16 0.359 2.50 1.25 0.53 1.75 3.38 4.00 1.00 0.34 6.31 0.69 0.50 1.00
10SM9084 REG (14.29) (9.12) (63.50) (31.75) (13.46) (44.45) (85.85) (101.60) (25.40) (8.64) (160.56) (17.53) (12.70) (25.40)
10SM12074 VEE 3/4 0.516 3.00 1.50 0.62 2.25 4.25 10.25 1.12 0.44 7.50 0.88 0.63 1.38
10SM12084 REG (19.03) (13.11) (76.20) (38.10) (15.75) (57.15) (107.95) (260.35) (28.45) (11.18) (190.50) (22.35) (16.00) (35.05)
10SM16074 VEE 1 0.688 4.12 2.06 0.63 2.81 5.12 10.25 1.62 0.56 9.09 1.25 1.13 1.75
10SM16084 REG (25.40) (17.48) (104.65) (52.32) (16.00) (71.37) (130.05) (260.35) (41.15) (14.22) (231.13) (31.75) (28.70) (44.45)

2-Way Angle / Replaceable Seat

20SM4872 VEE 1/4 0.125 2.00 1.00 0.38 1.19 2.13 2.25 3.00 0.75 0.22 5.75 0.62 0.38 0.75
20SM4882 REG (6.35) (3.18) (50.80) (25.40) (9.65) (30.23) (53.98) (57.15) (76.20) (19.05) (5.59) (146.05) (15.75) (9.65) (19.05)
20SM6872 VEE 3/8 0.219 2.00 1.00 0.47 1.19 2.13 2.25 3.00 0.75 0.22 5.75 0.62 0.38 0.75
20SM6882 REG (9.53) (5.56) (50.80) (25.40) (11.94) (30.23) (53.98) (57.15) (76.20) (19.05) (5.59) (146.05) (15.75) (9.65) (19.05)
20SM9872 VEE 9/16 0.312 2.50 1.25 0.53 1.75 2.50 3.13 4.00 1.00 0.34 7.34 0.69 0.50 1.00
20SM9882 REG (14.29) (7.92) (63.50) (31.75) (13.46) (44.45) (63.50) (79.38) (101.60) (25.40) (8.64) (186.68) (17.53) (12.70) (25.40)
20SM12872 VEE 3/4 0.438 3.00 1.50 0.62 2.25 3.44 4.25 10.25 1.12 0.44 9.00 0.88 0.63 1.38
20SM12882 REG (19.05) (11.13) (76.20) (38.10) (15.75) (57.15) (87.38) (107.95) (260.35) (28.45) (11.18) (228.60) (22.35) (16.00) (35.05) See
20SM16872 VEE 1 0.562 4.12 2.06 0.63 2.69 4.38 5.25 10.25 1.62 0.56 11.00 1.25 1.13 1.75 Figure 5
20SM16882 REG (25.40) (14.27) (104.65) (52.32) (16.00) (68.33) (111.13) (133.35) (260.35) (41.15) (14.22) (279.64) (31.75) (28.70) (44.4 5)
10SM9872 VEE 9/16 0.359 2.50 1.25 0.53 1.75 2.50 3.38 4.00 1.00 0.34 7.34 0.69 0.50 1.00
10SM9882 REG (14.29) (9.12) (63.50) (31.75) (13.46) (44.45) (63.50) (85.85) (101.60) (25.40) (8.64) (186.68) (17.53) (12.70) (25.40)
10SM12872 VEE 3/4 0.516 3.00 1.50 0.62 2.25 3.44 4.25 10.25 1.12 0.44 9.00 0.88 0.63 1.38
10SM12882 REG (19.03) (13.11) (76.20) (38.10) (15.75) (57.15) (87.38) (107.95) (260.35) (28.45) (11.18) (228.60) (22.35) (16.00) (35.05)
10SM16872 VEE 1 0.688 4.12 2.06 0.63 2.69 4.38 5.25 10.25 1.62 0.56 11.00 1.25 1.13 1.75
10SM16882 REG (25.40) (17.48) (104.65) (52.32) (16.00) (68.33) (111.13) (133.35) (260.35) (41.15) (14.22) (279.64) (31.75) (28.70) (44.45)

Figure 4 Figure 5
F F

G1 G1 M M
M M G
N
H N G
H D
D D E
E C
D1
C
C
B B
A A
3-Way / 1 on Pressure 2-Way Angle / Replaceable Seat

All general terms and conditions of sale, including limitations of our liability, apply to all products and services sold. 5
Outside Dimensions - inches (mm) Block
Catalog Stem Diameter Orifice Thick- Valve
Number Type Tube Diameter A B C D D1 E F G G1 H* M N ness Pattern

3-Way / 2-Stem Manifold

20SM4075 VEE 1/4 0.125 2.00 1.00 0.38 1.69 1.19 3.38 3.00 0.75 0.22 5.69 0.62 0.38 0.75
20SM4085 REG (6.35) (3.18) (50.80) (25.40) (9.65) (42.85) (30.15) (85.73) (76.20) (19.05) (5.59) (144.50) (15.75) (9.65) (19.05)
20SM6075 VEE 3/8 0.219 2.00 1.00 0.47 1.69 1.19 3.38 3.00 0.75 0.22 5.69 0.62 0.38 0.75
20SM6085 REG (9.53) (5.56) (50.80) (25.40) (11.94) (42.85) (30.15) (85.73) (76.20) (19.05) (5.59) (144.50) (15.75) (9.65) (19.05)
20SM9075 VEE 9/16 0.312 2.50 1.25 0.53 2.56 1.75 5.13 4.00 1.00 0.34 8.13 0.69 0.50 1.00
20SM9085 REG (14.29) (7.92) (63.50) (31.75) (13.46) (65.07) (44.45) (130.18) (101.60) (25.40) (8.64) (206.5) (17.53) (12.70) (25.40)
20SM12075 VEE 3/4 0.438 3.00 1.50 0.62 3.25 2.25 6.50 10.25 1.12 0.44 9.75 0.88 0.63 1.38
20SM12085 REG See
(19.05) (11.13) (76.20) (38.10) (15.75) (82.55) (57.15) (165.10) (260.35) (28.45) (11.18) (247.65) (22.35) (16.00) (35.05)
Figure 6
20SM16075 VEE 1 0.562 4.12 2.06 0.63 3.75 2.81 7.50 10.25 1.62 0.56 12.18 1.25 1.13 1.75
20SM16085 REG (25.40) (14.27) (104.65) (52.32) (16.00) (95.25) (71.37) (190.50) (260.35) (41.15) (14.22) (309.40) (31.75) (28.70) (44.4 5)
10SM9075 VEE 9/16 0.359 2.50 1.25 0.53 2.56 1.75 5.13 4.00 1.00 0.34 8.13 0.69 0.50 1.00
10SM9085 REG (14.29) (9.12) (63.50) (31.75) (13.46) (65.07) (44.45) (130.18) (101.60) (25.40) (8.64) (206.5) (17.53) (12.70) (25.40)
10SM12075 VEE 3/4 0.516 3.00 1.50 0.62 3.25 2.25 6.50 10.25 1.12 0.44 9.75 0.88 0.63 1.38
10SM12085 REG (19.03) (13.11) (76.20) (38.10) (15.75) (82.55) (57.15) (165.10) (260.35) (28.45) (11.18) (247.65) (22.35) (16.00) (35.05)
10SM16075 VEE 1 0.688 4.12 2.06 0.63 3.75 2.81 7.50 10.25 1.62 0.56 12.18 1.25 1.13 1.75
10SM16085 REG (25.40) (17.48) (104.65) (52.32) (16.00) (95.25) (71.37) (190.50) (260.35) (41.15) (14.22) (309.40) (31.75) (28.70) (44.45)

Figure 6
F

G1
M M
G
H N
D1
D
E

D1
C
B
A

3-Way / 2-Stem Manifold

6 All general terms and conditions of sale, including limitations of our liability, apply to all products and services sold.
All general terms and conditions of sale, including limitations of our liability, apply to all products and services sold. 7
WARNING
FAILURE, IMPROPER SELECTION OR IMPROPER USE OF THE PRODUCTS AND/OR SYSTEMS DESCRIBED HEREIN OR RELATED ITEMS CAN CAUSE DEATH, PERSONAL INJURY
AND PROPERTY DAMAGE.
This document and other information from Parker Hannifin Corporation, its subsidiaries and authorized distributors provide product and/or system options for further investiga-
tion by users having technical expertise. It is important that you analyze all aspects of your application and review the information concerning the product or system in the current
product catalog. Due to the variety of operating conditions and applications for these products or systems, the user, through its own analysis and testing, is solely responsible
for making the final selection of the products and systems and assuring that all performance, safety and warning requirements of the application are met. The products described
herein, including without limitation, product features, specifications, designs, availability and pricing, are subject to change by Parker Hannifin Corporation and its subsidiaries at
any time without notice.

2013 Parker Hannifin Corporation | Autoclave Engineers is a registered trademark of the Parker Hannifin Corporation 02-0112SE January2013

Caution! Do not mix or interchange parts or tubing with those of

other manufacturers. Doing so is unsafe and will void warranty.

PH: 814-860-5700 FAX: 814-860-5811 PH: 353 53 914 1566

www.autoclave.com FAX: 353 53 914 1582 ISO-9001 Certified
Needle Valves
Medium Pressure

QS Series
Pressures to 15,000 psi (1034 bar)

Since 1945 Parker Autoclave Engineers has designed

Medium Pressure Valve Features:

Compression Sleeve to 15,000 psi (1034 bar).

Tubing sizes available from 1/4 to1.
Rising stem/barstock body design.
Non-rotating stem prevents stem/seat galling.
Anti-galling molybdenum disulfide coated gland nuts.
Gland nut positioning mark for assembly.
Connection weep holes for safety and leak detection.
Metal-to-metal seating achieves bubble-tight shut-off, longer stem/seat life in abrasive
flow, greater durability for repeated on/off cycles and excellent corrosion resistance.
PTFE encapsulated packing provides dependable stem and body sealing.

Needle Valves - QS Series

Stem sleeve and packing gland materials have been selected to achieve extended thread
cycle life and reduced handle torque.
Choice of Vee or Regulating stem tip.
Available in two body patterns.
1 valve bodies are 2507 Super Duplex standard
Parker Autoclave Engineers valves are complemented by a complete line of fittings, tubing,
check valves and line filters. The QS Series uses Parker Autoclave Engineers Quick Set
compression sleeve design, providing fast easy make-up and reliable bubble-tight performance
in liquid or gas service.
Medium Pressure

www.autoclave.com 1
Needle Valves - QS Series
Pressures to 15,000 psi (1034 bar)

Tube Pressure
Outside Rating
Diameter Orifice psi (bar)
Size Connection Size Rated @ Room
Inches Type Inches (mm) Cv* Temperature**

1/4 QS 250 0.125 (3.18) 0.31 15,000 (1034)

3/8 QS 375 0.219 (5.56) 0.75 15,000 (1034)
9/16 QS 562 0.359 (9.12) 2.80 15,000 (1034)
3/4 QS 750 0.516 (13.10) 5.20 15,000 (1034)
1 QS 1000 0.688 (17.48) 5.20 15,000 (1034)

Notes:
* CV values shown are for 2-way straight valve pattern. For 2-way
angle patterns, increase CV value 50%. (Based on water)

** For complete temperature ratings see pressure/temperature rating

guide in Technical Information section.

Generalized Flow Coefficient Curves (Cv)

POWDER COATED

LOW FRICTION
STAINLESS STEEL
HANDLE 7
ALUMINUM ONE PIECE NON-ROTATING
BRONZE PACKING STEM
GLAND
6
LOCKING DEVICE
Regulating Stem
Number of turns open

5
ANTI-EXTRUSION
BACK-UP RINGS

ADJUSTABLE PACKING
4
BELOW THREADS
COLD WORKED
TYPE 316 SS
BODY IN FIVE
3
PATTERNS
(See Note)

2
MEDIUM
PRESSURE
Vee Stem
1
COMPRESSION
SLEEVE
CHOICE OF VEE CONNECTIONS
METAL-TO-METAL
OR REGULATING SEATING
STEM TIP
0
(Note: 1 valves are 2507 Super Duplex)
10 20 30 40 50 60 70 80 90 100
% of rated Cv
To ensure proper fit use Parker Autoclave Engineers tubing

Ordering Procedure
For complete information on available stem types, optional connections and additional valve options, see Needle Valve Options section or contact
your Sales Representative. QS Series valves are furnished complete with connection components, unless otherwise specified.

Typical catalog number: 15QS4071

15QS 4 07 1 XX
Valve Outside Diameter Stem/Seat Body Options
Series Tube Size Type Pattern
TG - PTFE Glass Plating
15QS 4-1/4 07 - non-rotating 1 - two-way straight
Vee stem (on-off service) GY - Graphite Yarn
6-3/8 2 - two-way angle
Packing
9-9/16 08 - non-rotating 3 - three-way, two on pressure
12-3/4 regulating stem (tapered tip See valve options
4 - three-way, one on pressure for ratings
16-1 for regulating and shutoff)
5 - three-way, two stem
87 - Vee stem with replaceable seat
manifold valve
88 - Regulating stem with replaceable seat

2
Valve Options Valve Maintenance
Extreme Temperatures Repair Kits: add R to the front of valve catalog
Standard Parker Autoclave Engineers valves with PTFE packing may number for proper repair kit.
be operated to 450F (232C). High temperature packing and/or (Example: R15QS4071)
extended stuffing box are available for service from -100F (-73C) Valve Bodies: Valve bodies are available. Order using the eight (8)
to 650F (343C) by adding the following suffixes to catalog order digit part number found on the valve drawing or
number. contact your Sales Representative for information.
TG standard valve with PTFE glass packing to 600F (316C).
GY standard valve with graphite braided yarn packing to 650F (343C). Consult your Parker Autoclave Engineers representative for pricing on repair
B standard valve with cryogenic trim materials and PTFE packing to kits and valve bodies.
-100F (-73C).

Parker Autoclave Engineers does not recommend compression sleeve connections

below -100F (-73C) or above 650F (343C). For additional valve options, contact
your Sales Representative.

Outside Dimensions - inches (mm) Block

Catalog Stem Diameter Orifice Thick- Valve
Number Type Tube Diameter A B C D D1 E F G G1 H* M N ness Pattern

2-Way Straight
15QS4071 VEE 1/4 0.125 2.00 1.00 0.38 1.62 1.19 2.00 3.00 0.75 0.22 4.69 0.62 0.38 0.75
15QS4081 REG (6.35) (3.18) (50.80) (25.40) (9.53) (41.15) (30.23) (50.80) (76.20) (19.05) (5.59) (119.13) (15.75) (9.65) (19.05)
15QS6071 VEE 3/8 0.219 2.00 1.00 0.47 1.62 1.19 2.00 3.00 0.75 0.22 4.63 0.62 0.38 0.81
15QS6081 REG (9.53) (5.56) (50.80) (25.40) (11.94) (41.15) (30.23) (50.80) (76.20) (19.05) (5.59) (117.60) (15.75) (9.65) (20.57)
15QS9071 VEE 9/16 0.359 3.00 1.50 0.53 2.38 1.75 3.00 4.00 1.00 0.34 6.05 0.69 0.50 1.25 See
15QS9081 REG (14.29) (9.12) (76.20) (38.10) (13.46) (60.45) (44.45) (76.20) (101.60) (25.40) (8.64) (153.67) (17.53) (12.70) (31.75) Figure 1
15QS12071 VEE 3/4 0.516 4.12 2.06 0.62 3.00 2.25 3.88 10.25 1.12 0.44 7.13 0.88 0.63 1.50
15QS12081 REG (19.05) (13.11) (104.65) (52.32) (15.75) (76.20) (57.15) (98.43) (260.35) (28.45) (11.18) (180.98) (22.35) (16.00) (38.10)
15QS16071 VEE 1 0.688 4.75 2.38 1.19 3.75 2.63 4.75 10.25 1.12 0.44 8.00 0.88 0.63 2.00
15QS16081 REG (25.40) (17.48) (120.65) (60.33) (30.18) (95.25) (66.68) (120.65) (260.35) (28.45) (11.18) (203.20) (22.35) (16.00) (50.80)
Note: 1 valve bodies are 2507 Super Duplex

2-Way Angle
15QS4072 VEE 1/4 0.125 2.00 1.00 0.38 1.19 2.44 3.00 0.75 0.22 4.81 0.62 0.38 0.75
15QS4082 REG (6.35) (3.18) (50.80) (25.40) (9.53) (30.23) (61.98) (76.20) (19.05) (5.59) (122.17) (15.75) (9.65) (19.05)
15QS6072 VEE 3/8 0.219 2.00 1.00 0.47 1.20 2.56 3.00 0.75 0.22 4.93 0.62 0.38 0.81
15QS6082 REG (9.53) (5.56) (50.80) (25.40) (11.94) (30.48) (65.02) (76.20) (19.05) (5.59) (125.22) (15.75) (9.65) (20.62)
15QS9072 VEE 9/16 0.359 3.00 1.50 0.53 1.69 3.50 4.00 1.00 0.36 6.55 0.69 0.50 1.25 See
15QS9082 REG (14.29) (9.12) (76.20) (38.10) (13.46) (42.88) (88.90) (101.60) (25.40) (9.14) (166.37) (17.53) (12.70) (31.75) Figure 2
15QS12072 VEE 3/4 0.516 4.12 2.06 0.62 2.19 4.63 10.25 1.12 0.44 7.88 0.88 0.63 1.50
15QS12082 REG (19.05) (13.11) (104.65) (52.32) (15.75) (55.58) (117.48) (260.35) (28.45) (11.18) (200.15) (22.35) (16.00) (38.10)
15QS16072 VEE 1 0.688 4.75 2.38 1.19 3.75 5.38 10.25 1.12 0.44 8.63 0.88 0.63 2.00
15QS16082 REG (25.40) (17.48) (120.65) (60.33) (30.18) (95.25) (136.53) (260.35) (28.45) (11.18) (219.25) (22.35) (16.00) (50.80)
Note: 1 valve bodies are 2507 Super Duplex
G - Packing gland mounting hole drill size * H Dimension is with stem in closed position. For prompt service, Parker Autoclave Engineers stocks
G - Bracket mounting hole size **1/8" straight and 3-Way/2 on pressure valves have offset select products. Consult factory.
1
Panel mounting drill size: 0.22 all valves. tube connections All dimensions for reference only and subject to change.

Figure 1 Figure 2

F F

G1 M M M M G
H N G G1
H
N
D1 D
D
E
E
C C
B
A B
A
2-Way Straight 2-Way Angle
3
WARNING
FAILURE, IMPROPER SELECTION OR IMPROPER USE OF THE PRODUCTS AND/OR SYSTEMS DESCRIBED HEREIN OR RELATED ITEMS CAN CAUSE DEATH, PERSONAL INJURY AND PROPERTY DAMAGE.
This document and other information from Parker Hannifin Corporation, its subsidiaries and authorized distributors provide product and/or system options for further investigation by users having technical
expertise. It is important that you analyze all aspects of your application and review the information concerning the product or system in the current product catalog. Due to the variety of operating conditions
and applications for these products or systems, the user, through its own analysis and testing, is solely responsible for making the final selection of the products and systems and assuring that all performance,
safety and warning requirements of the application are met. The products described herein, including without limitation, product features, specifications, designs, availability and pricing, are subject to change by
Parker Hannifin Corporation and its subsidiaries at any time without notice.

Offer of Sale
The items described in this document are available for sale by Parker Hannifin Corporation, its subsidiaries or its authorized distributors. Any sale contract entered by Parker will be governed by the provisions
stated in Parker's standard terms and conditions of sale (copy available upon request).

2013 Parker Hannifin Corporation | Autoclave Engineers is a registered trademark of the Parker Hannifin Corporation 02-1246BE January2013

Caution! Do not mix or interchange parts or tubing with those of

other manufacturers. Doing so is unsafe and will void warranty.

Since 1945, Parker Autoclave Engineers has

designed and built premium quality valves, fittings
and tubing. This commitment to engineering and
manufacturing excellence has earned Parker
Autoclave a reputation for reliable and efficient
product performance. Parker Autoclave Engineers
has long been established as the worldwide leader
in high pressure fluid handling components for
the chemical/petrochemical, research, oil and gas,
waterjet, and waterblast industries.

Needle Valves - High Pressure

30SC, 43SC, 30VM, 40VM, 60VM, 100VM & 150V Series

www.autoclave.com
Needle Valves - High Pressure
High Pressure Valve Features

Tubing sizes from 1/4 to 1.

Non-rotating stem prevents stem/seat galling.
Rising stem/barstock body design.
Metal-to-metal seating achieves bubble-tight shut-off, longer stem/seat life in abrasive flow, greater
durability for repeated on/off cycles and excellent corrosion resistance.
For dependable stem and body sealing 30SC, 43SC and 30VM valves are furnished with PTFE
encapsulated packing; the 40VM and 60VM valves feature nylon/leather packing below threads.
Stem sleeve and packing gland materials have been selected to achieve extended thread cycle life and
reduced handle torque.
Choice of Vee or Regulating stem tips.
Series 100VM: Pressures to 100,000 psi (6895 bar) features:
Cold-worked type 316 or 15-5PH stainless steel body with aluminum bronze packing gland and
non-rotating stem.
Nylon and leather packing below stem threads.
Series 150V: Pressures to 150,000 psi (10342 bar) features:
Cylindrical body of high strength 15-5PH stainless steel with stainless steel packing gland. Tool steel non-
rotating stem with replaceable seat of nickel maraging steel. Stem must be actuated with torque wrench
(refer to Tools, Installation, Operation and Maintenance section).
Wedge-type PTFE and leather packing below stem threads with beryllium-copper Autoclave
Anti-Extrusion Back up Rings.
Vee stem tip only
Parker Autoclave Engineers valves are complemented by a complete line of high pressure fittings and tubing.
The high pressure series uses Parker Autoclave Engineers' coned-and-threaded connections for dependable
performance in gas or liquid service.

2 All general terms and conditions of sale, including limitations of our liability, apply to all products and services sold.
Needle Valves - SC Series
Pressures to 43,000 psi (2965 bar)

Tube Pressure
Outside Rating
Diameter Orifice psi (bar)
Size Connection Size Rated @ Room
Inches Type Inches (mm) Cv* Temperature**

Series 30SC
1 F1000C43 .438 (11.12) 2.6 30,000 (2068)
Series 43SC
1 F1000C43 .438 (11.12) 2.6 43,000 (2965)

Notes:
* CV values shown are for 2-way straight valve pattern. For 2-way
angle patterns, increase CV value 50%.

** For complete temperature ratings see pressure/temperature rating

guide in Technical Information section.

Generalized Flow Coefficient Curves (Cv)

7
STAINLESS STEEL
T-HANDLE

LOW FRICTION
6
ALUMINUM
Number of turns open

BRONZE PACKING
GLAND
LOCKING DEVICE 5
Regulating Stem
4
ANTI-EXTRUSION
NON-ROTATING
BACK-UP RINGS
STEM

ADJUSTABLE PACKING
3
BELOW THREADS
COLD WORKED
TYPE 316 SS
BODY IN TWO
PATTERNS
2
Vee Stem
1
HIGH PRESSURE
CONED AND
THREADED
CONNECTIONS
CHOICE OF VEE METAL-TO-METAL 0
OR REGULATING
STEM TIP
SEATING 10 20 30 40 50 60 70 80 90 100
% of rated Cv
To ensure proper fit use Autoclave tubing

Ordering Procedure
For complete information on available stem types, optional connections and additional valve options, see Needle Valve Options section or contact
your Sales Representative. The 30SC Series valves are furnished complete with connection components, unless otherwise specified.

Typical catalog number: 30SC16071

30SC 16 07 1 XX
Valve Outside Diameter Stem/Seat Body Options
Series Tube Size Type Pattern
For extreme
30SC 16-1 07 - non-rotating 1 - two-way straight
temperature and
43SC Vee stem (on-off service) 2 - two-way angle other options,
08 - non-rotating
see Valve Options.
regulating stem (tapered tip

for regulating and shutoff)
87 - Vee stem with replaceable
seat
88 - Regulating stem with
replaceable seat

All general terms and conditions of sale, including limitations of our liability, apply to all products and services sold. 3
Valve Options Valve Maintenance
Extreme Temperatures Repair Kits: add R to the front of valve catalog
Standard Parker Autoclave Engineers valves with PTFE packing may number for proper repair kit.
be operated from 0F (-17.8C) to 450F (232C). High temperature (Example: R30SC16071)
packing is available for service from -423F (-252C) to 1200F Valve Bodies: Valve bodies are available. Order using the eight (8)
(649C) by adding the following suffixes to catalog order number. digit part number found in the valve drawing or
TG - standard valve with PTFE glass packing to 600F (316C). contact your Sales Representative for information.
GY - standard valve with graphite braided yarn packing to 800F (427C). Consult your Parker Autoclave Engineers representative for pricing on repair
8,000 psi (569 bar) max. kits and valve bodies. Refer to the Tools, Installation, Operation and
HT - extended stuffing box valve with graphite braided yarn packing to 1200F (649C). Maintenance section for proper maintenance procedures.
B - standard valve with cryogenic trim material and PTFE packing to -100F (-73C).
LT - extended stuffing box valve with PTFE packing & Cryogenic trim materials to
-423F (-252C).
K - anti-vibration collet and gland assembly.

Dimensions - inches (mm) Block

Outside
Catalog Stem Orifice Thick- Valve
Diameter
Number Type Diameter
Tube A B C D D1 E F G G1 H* M N ness Pattern

2-Way Straight
30SC16071 VEE 1 0.438 4.13 2.06 0.72 3.50 2.75 4.44 10.25 1.62 0.56 8.42 1.25 1.12 1.75
30SC16081 REG (25.40) (11.12) (104.90) (52.32) (18.28) (88.90) (69.85) (112.77) (260.35) (41.14) (14.22) (213.86) (31.75) (28.44) (44.45) See
43SC16071 VEE 1 0.438 4.88 2.44 0.72 3.50 2.75 4.44 10.25 1.62 0.56 8.42 1.25 1.12 2.25 Figure 1
43SC16081 REG (25.40) (11.12) (123.96) (61.96) (18.28) (88.90) (69.85) (112.77) (260.35) (41.14) (14.22) (213.86) (31.75) (28.44) (57.15)

2-Way Angle
30SC16072 VEE 1 0.438 4.13 2.06 0.72 2.75 5.12 10.25 1.62 0.56 9.35 1.25 1.12 1.75
30SC16082 REG (25.40) (11.12) (104.90) (52.32) (18.28) (69.85) (130.04) (260.35) (41.14) (14.22) (237.49) (31.75) (28.44) (44.45) See
43SC16072 VEE 1 0.438 4.88 2.44 0.72 2.75 5.12 10.25 1.62 0.56 9.35 1.25 1.12 2.25 Figure 2
43SC16082 REG (25.40) (11.12) (123.96) (61.96) (18.28) (69.85) (130.04) (260.35) (41.14) (14.22) (237.49) (31.75) (28.44) (57.15)

2-Way Angle/Replaceable Seat

30SC16872 VEE 1 0.438 4.13 2.06 0.72 2.75 4.31 5.24 10.25 1.62 0.56 10.56 1.25 1.12 1.75
30SC16882 REG (25.40) (11.12) (104.90) (52.32) (18.28) (71.37) (109.47) (133.35) (260.35) (41.14) (14.22) (268.22) (31.75) (28.44) (44.45) See
43SC16872 VEE 1 0.438 4.88 2.44 0.72 2.75 4.31 5.24 10.25 1.62 0.56 10.56 1.25 1.12 2.25 Figure 3
43SC16882 REG (25.40) (11.12) (123.96) (61.96) (18.28) (71.37) (109.47) (133.35) (260.35) (41.14) (14.22) (268.22) (31.75) (28.44) (57.15)

Figure 1 Figure 2 Figure 3

F F

G1 M M G1 M M
N G N G

H D H D
E
E C
C
D1

B A
B
A

2-Way Straight 2-Way Angle 2-Way Angle / Replaceable Seat

4 All general terms and conditions of sale, including limitations of our liability, apply to all products and services sold.
Needle Valves - 30VM Series
Pressures to 30,000 psi (2068 bar)

Tube Pressure
Outside Rating
Diameter Orifice psi (bar)
Size Connection Size Rated @ Room
Inches Type Inches (mm) Cv* Temperature**

1/4 F250C 0.094 (2.39) 0.12 30,000 (2068)

3/8 F375C 0.125 (3.18) 0.23 30,000 (2068)
9/16 F562C 0.125 (3.18) 0.33 30,000 (2068)

Notes:
* CV values shown are for 2-way straight valve pattern. For 2-way
angle patterns, increase CV value 50%.

** For complete temperature ratings see pressure/temperature rating

guide in Technical Information section.

Generalized Flow Coefficient Curves (Cv)

7
ALUMINUM BRONZE POWDER COATED
PACKING GLAND STAINLESS STEEL
HANDLE
6
COLD WORKED TYPE 316
SS BODY IN FIVE
Number of turns open

PATTERNS
LOCKING DEVICE 5
NON-ROTATING
STEM ADJUSTABLE PACKING Regulating Stem
BELOW THREADS
ANTI-EXTRUSION
4
BACK-UP RINGS

1
Vee Stem
CHOICE OF VEE OR HIGH PRESSURE
REGULATING STEM TIP CONED-AND-THREADED 0
METAL-TO-METAL SEATING CONNECTIONS
10 20 30 40 50 60 70 80 90 100
% of rated Cv
To ensure proper fit use Autoclave tubing

Ordering Procedure
For complete information on available stem types, optional connections and additional valve options, see Needle Valve Options section or contact
your Sales Representative. The 30VM Series valves are furnished complete with connection components, unless otherwise specified.

Typical catalog number: 30VM4071

30VM 4 07 1 XX
Valve Outside Diameter Stem/Seat Body Options
Series Tube Size Type Pattern
For extreme
4-1/4 07 - non-rotating 1 - two-way straight
temperature and other
6-3/8 Vee stem (on-off service) 2 - two-way angle options, see Valve
9-9/16 08 - non-rotating 3 - three-way, two on pressure Options.
regulating stem (tapered tip
4 - three-way, one on pressure
for regulating and shutoff)
5 - three-way, two-stem
87 - Vee stem with replaceable
manifold valve
seat
88 - Regulating stem with
replaceable seat

All general terms and conditions of sale, including limitations of our liability, apply to all products and services sold. 5
Valve Options Valve Maintenance
Extreme Temperatures Repair Kits: add R to the front of valve catalog
Standard Parker Autoclave Engineers valves with PTFE packing may number for proper repair kit.
be operated from 0F (-17.8C) to 450F (232C). High temperature (Example: R30VM4071)
packing is available for service from -423F (-252C) to 1200F Valve Bodies: Valve bodies are available. Order using the eight (8)
(644C) by adding the following suffixes to catalog order number. digit part number found in the valve drawing or
TG - standard valve with PTFE glass packing to 600F (316C). contact your Sales Representative for information.
GY - standard valve with graphite braided yarn packing to 800F (427C). Consult your Parker Autoclave Engineers representative for pricing on repair
HT - extended stuffing box valve with graphite braided yarn packing to 1200F (649C). kits and valve bodies. Refer to the Tools, Installation, Operation and Mainte-
B - standard valve with cryogenic trim material and PTFE packing to -100F (-73C). nance section for proper maintenance procedures.
LT - extended stuffing box valve with PTFE packing & Cryogenic trim materials to
-423F (-252C).
K - anti-vibration collet and gland assembly.

Outside Dimensions - inches (mm) Block

Catalog Stem Orifice
Diameter Thick- Valve
Number Type Diameter
Tube A B C D D1 E F G G1 H* M N ness Pattern

2-Way Straight
30VM4071 VEE 1/4 0.094 2.00 1.00 0.50 1.50 1.12 2.00 3.00 1.00 0.22 4.62 0.69 0.38 1.00
30VM4081 REG (6.35) (2.39) (50.80) (25.40) (12.70) (38.10) (28.45) (50.80) (76.20) (25.40) (5.59) (117.35) (17.53) (9.65) (25.40)
30VM6071 VEE 3/8 0.125 2.00 1.00 0.53 1.50 1.12 2.00 3.00 1.00 0.22 4.68 0.69 0.38 1.00 See
30VM6081 REG (9.53) (3.18) (50.80) (25.40) (13.46) (38.10) (28.45) (50.80) (76.20) (25.40) (5.59) (118.87) (17.53) (9.65) (25.40) Figure 1
30VM9071 VEE 9/16 0.125 2.62 1.31 0.81 1.56 1.12 2.44 3.00 1.00 0.28 5.06 0.69 0.38 1.50
30VM9081 REG (14.29) (3.18) (66.55) (33.27) (20.57) (39.62) (28.45) (61.98) (76.20) (25.40) (7.11) (128.52) (17.53) (9.65) (38.10)

2-Way Angle
30VM4072 VEE 1/4 0.094 2.00 1.00 0.50 1.12 2.00 3.00 1.00 0.22 4.62 0.69 0.38 1.00
30VM4082 REG (6.35) (2.39) (50.80) (25.40) (12.70) (28.45) (50.80) (76.20) (25.40) (5.59) (117.35) (17.53) (9.65) (25.40)
30VM6072 VEE 3/8 0.125 2.00 1.00 0.53 1.12 2.12 3.00 1.00 0.22 4.74 0.69 0.38 1.00 See
30VM6082 REG (9.53) (3.18) (50.80) (25.40) (13.46) (28.45) (53.85) (76.20) (25.40) (5.59) (120.40) (17.53) (9.65) (25.40) Figure 2
30VM9072 VEE 9/16 0.125 2.62 1.31 0.81 1.12 2.44 3.00 1.00 0.28 5.06 0.69 0.38 1.50
30VM9082 REG (14.29) (3.18) (66.55) (33.27) (20.57) (28.45) (61.98) (76.20) (25.40) (7.11) (128.52) (17.53) (9.65) (38.10)

3-Way / 2 on Pressure
30VM4073 VEE 1/4 0.094 2.00 1.00 0.50 1.50 1.12 2.12 3.00 1.00 0.22 4.74 0.69 0.38 1.00
30VM4083 REG (6.35) (2.39) (50.80) (25.40) (12.70) (38.10) (28.45) (53.85) (76.20) (25.40) (5.59) (120.40) (17.53) (9.65) (25.40)
30VM6073 VEE 3/8 0.125 2.00 1.00 0.53 1.50 1.12 2.50 3.00 1.00 0.22 5.12 0.69 0.38 1.00 See
30VM6083 REG (9.53) (3.18) (50.80) (25.40) (13.46) (38.10) (28.45) (63.50) (76.20) (25.40) (5.59) (130.05) (17.53) (9.65) (25.40) Figure 3
30VM9073 VEE 9/16 0.125 2.62 1.31 0.81 1.56 1.12 2.88 3.00 1.00 0.28 5.49 0.69 0.38 1.50
30VM9083 REG (14.29) (3.18) (66.55) (33.27) (20.57) (39.62) (28.45) (73.15) (76.20) (25.40) (7.11) (139.45) (17.53) (9.65) (38.10)

Figure 1 Figure 2 Figure 3

F F F

G1 M G1 M G1 M M
M M
H N G H N G
H N G
D D1
D1 D
D E
E
E C
C C
B B
A B A
A
2-Way Straight 2-Way Angle 3-Way / 2 on Pressure

6 All general terms and conditions of sale, including limitations of our liability, apply to all products and services sold.
Dimensions - inches (mm) Block
Catalog Outside
Stem Orifice Thick- Valve
Number Diameter
Type Diameter
Tube A B C D D1 E F G G1 H* M N ness Pattern

3-Way / 1 on Pressure
30VM4074 VEE 1/4 0.094 2.00 1.00 0.50 1.12 2.00 3.00 1.00 0.22 4.62 0.69 0.38 1.00
30VM4084 REG (6.35) (2.39) (50.80) (25.40) (12.70) (28.45) (50.80) (76.20) (25.40) (5.59) (117.35) (17.53) (9.65) (25.40)
30VM6074 VEE 3/8 0.125 2.00 1.00 0.53 1.12 2.12 3.00 1.00 0.22 4.74 0.69 0.38 1.00 See
30VM6084 REG (9.53) (3.18) (50.80) (25.40) (13.46) (28.45) (53.85) (76.20) (25.40) (5.59) (120.40) (17.53) (9.65) (25.40) Figure 4
30VM9074 VEE 9/16 0.125 2.62 1.31 0.81 1.12 2.44 3.00 1.00 0.28 5.12 0.69 0.38 1.50
30VM9084 REG (14.29) (3.18) (66.55) (33.27) (20.57) (28.45) (61.98) (76.20) (25.40) (7.11) (130.05) (17.53) (9.65) (38.10)

2-Way Angle / Replaceable Seat

30VM4872 VEE 1/4 0.094 2.00 1.00 0.50 1.12 2.06 2.38 3.00 1.00 0.22 5.80 0.69 0.38 1.00
30VM4882 REG (6.35) (2.39) (50.80) (25.40) (12.70) (28.45) (52.32) (60.45) (76.20) (25.40) (5.59) (147.32) (17.53) (9.65) (25.40)
30VM6872 VEE 3/8 0.125 2.00 1.00 0.53 1.12 2.31 2.38 3.00 1.00 0.22 6.05 0.69 0.38 1.00 See
30VM6882 REG (9.53) (3.18) (50.80) (25.40) (13.46) (28.45) (58.67) (60.45) (76.20) (25.40) (5.59) (153.67) (17.53) (9.65) (25.40) Figure 5
30VM9872 VEE 9/16 0.125 2.62 1.31 0.81 1.19 2.62 2.44 3.00 1.00 0.28 6.45 0.69 0.38 1.50
30VM9882 REG (14.29) (3.18) (66.55) (33.27) (20.57) (30.23) (66.55) (61.98) (76.20) (25.40) (7.11) (163.83) (17.53) (9.65) (38.10)

3-Way / 2-Stem Manifold

30VM4075 VEE 1/4 0.094 2.00 1.00 0.50 1.53 1.12 3.06 3.00 1.00 0.22 5.68 0.69 0.38 1.00
30VM4085 REG (6.35) (2.39) (50.80) (25.40) (12.70) (38.86) (28.45) (77.72) (76.20) (25.40) (5.59) (144.27) (17.53) (9.65) (25.40)
30VM6075 VEE 3/8 0.125 2.00 1.00 0.53 1.62 1.12 3.25 3.00 1.00 0.22 5.87 0.69 0.38 1.00 See
30VM6085 REG (9.53) (3.18) (50.80) (25.40) (13.46) (41.15) (28.45) (82.55) (76.20) (25.40) (5.59) (149.10) (17.53) (9.65) (25.40) Figure 6
30VM9075 VEE 9/16 0.125 2.62 1.31 0.81 1.88 1.12 3.75 3.00 1.00 0.28 6.37 0.69 0.38 1.50
30VM9085 REG (14.29) (3.18) (66.55) (33.27) (20.57) (47.75) (28.45) (95.25) (76.20) (25.40) (7.11) (161.80) (17.53) (9.65) (38.10)

G - Packing gland mounting hole drill size * H Dimension is with stem in closed position. For prompt service, Parker
G1 - Bracket mounting hole size All dimensions for reference only and subject to change. Autoclave engineers stock
Panel mounting drill size: 0.22 all valves. select products.
Consult factory.

Figure 4 Figure 5 Figure 6

F F

G1
G1 M M M M
N G
N G H
D1
D D
H
E
E
C
D1
D1 C
B
A
B
A
3-Way / 1 on Pressure 2-Way Angle / Replacable Seat 3-Way / 2-Stem Manifold

All general terms and conditions of sale, including limitations of our liability, apply to all products and services sold. 7
Needle Valves - 40VM Series
Pressures to 40,000 psi (2760 bar)

Tube Pressure
Outside Rating
Diameter Orifice psi (bar)
Size Connection Size Rated @ Room
Inches Type Inches (mm) Cv* Temperature**

9/16 F562C40 0.109 (2.77) 0.28 40,000 (2760)

Notes:
* CV values shown are for 2-way straight valve pattern. For 2-way
angle patterns, increase CV value 50%.

** For complete temperature ratings see pressure/temperature rating

guide in Technical Information section.

Generalized Flow Coefficient Curves (Cv)

ALUMINUM BRONZE
POWDER COATED
STAINLESS STEEL
6
PACKING GLAND HANDLE
Number of turns open

COLD WORKED TYPE 316 SS

BODY IN TWO PATTERNS 5
LOCKING DEVICE
NON-ROTATING
STEM 4
ADJUSTABLE PACKING
Regulating Stem
ANTI-EXTRUSION
BELOW THREADS
3
BACK-UP RINGS

1
Vee Stem
HIGH PRESSURE
CONED-AND-THREADED
CONNECTIONS 0
CHOICE OF VEE OR
REGULATING STEM TIP
10 20 30 40 50 60 70 80 90 100
METAL-TO-METAL SEATING

% of rated Cv

To ensure proper fit use Autoclave tubing

Ordering Procedure
For complete information on available stem types, optional connections and additional valve options, see Needle Valve Options Section or contact
your Sales Representative. The 40VM Series valves are furnished complete with connection components, unless otherwise specified.

Typical catalog number: 40VM9071

40VM 9 07 1 XX
Valve Outside Diameter Stem/Seat Body Options
Series Tube Size Type Pattern
For extreme
9-9/16 07 - non-rotating 1 - two-way straight
temperature and other
Vee stem (on-off service) 2 - two-way angle options, see Valve
08 - non-rotating 5 - three-way, two-stem Options.
regulating stem (tapered tip manifold valve
for regulating and shutoff)

8 All general terms and conditions of sale, including limitations of our liability, apply to all products and services sold.
Valve Options Valve Maintenance
Extreme Temperatures Repair Kits: add R to the front of valve catalog
Standard Parker Autoclave Engineers valves with PTFE packing may number for proper repair kit.
be operated from 0F (-17.8C) to 450F (232C). High temperature (Example: R40VM9071)
packing is available for service from -423F (-252C) to 1200F Valve Bodies: Valve bodies are available. Order using the eight (8)
(649C) by adding the following suffixes to catalog order number. digit part number found in the valve drawing or
contact your Sales Representative for information.
TG - standard valve with PTFE glass packing to 600F (316C). See note below.
Consult your Parker Autoclave Engineers representative for pricing on repair
GY - standard valve with graphite braided yarn packing to 800F (427C).
kits and valve bodies. Refer to the Tools, Installation, Operation and
HT - extended stuffing box valve with graphite braided yarn packing to 1200F (649C). Maintenance section for proper maintenance procedures.
B - standard valve with cryogenic trim material and PTFE packing to -100F (-73C).
LT - extended stuffing box valve with PTFE packing & Cryogenic trim materials to
-423F (-252C).
K - anti-vibration collet and gland assembly.
Note: 40VM and 60VM valves supplied with Peak/PTFE Glass/Peek

Dimensions - inches (mm) Block

Outside
Catalog Stem Orifice Thick- Valve
Diameter
Number Type Diameter
Tube A B C D D1 E F G G1 H* M N ness Pattern

2-Way Straight
40VM9071 VEE 9/16 0.109 2.62 1.31 0.72 1.75 1.31 2.50 3.00 1.00 0.28 5.06 0.69 0.38 1.50 See
40VM9081 REG (14.3) (2.77) (66.55) (33.27) (18.29) (44.45) (33.27) (63.50) (76.20) (25.40) (7.11) (128.52) (17.53) (9.65) (38.10) Figure 1

2-Way Angle
40VM9072 VEE 9/16 0.109 2.62 1.31 0.72 1.31 2.81 3.00 1.00 0.28 5.37 0.69 0.38 1.50 See
40VM9082 REG (14.3) (2.77) (66.55) (33.27) (18.29) (33.27) (71.37) (76.20) (25.40) (7.11) (136.40) (17.53) (9.65) (38.10) Figure 2

3-Way / 2 Stem Manifold

40VM9075 VEE 9/16 0.109 2.62 1.31 0.72 2.06 1.31 4.12 3.00 1.00 0.28 6.59 0.69 0.38 1.50 See
40VM9085 REG (14.3) (2.77) (66.55) (33.27) (18.29) (52.32) (33.27) (104.65) (76.20) (25.40) (7.11) (167.39) (17.53) (9.65) (38.10) Figure 3

2-Way Angle / Replaceable Seat

40VM9872 VEE 9/16 0.109 2.62 1.31 0.72 1.31 2.68 2.62 3.00 1.00 0.28 6.90 0.69 0.38 1.50 See
40VM9882 REG (14.29) (2.77) (66.55) (33.27) (18.29) (33.27) (68.07) (66.55) (76.20) (25.40) (7.11) (175.26) (17.53) (9.65) (38.10) Figure 4

Figure 1 Figure 2 Figure 3 Figure 4

F F F
F
G1
G1 M M M M
G1 M M G G1 M M
G H N
H N
G N G
H N D
D1
H
D D
D1 E
D E E
D1
E C
C C C
B
D1
B A
B B
A A A

2-Way Straight 2-Way Angle 3-Way / 2 Stem Manifold 2-Way Angle / Replaceable Seat

All general terms and conditions of sale, including limitations of our liability, apply to all products and services sold. 9
Needle Valves - 60VM Series
Pressures to 60,000 psi (4137 bar)

Tube Pressure
Outside Rating
Diameter Orifice psi (bar)
Size Connection Size Rated @ Room
Inches Type Inches (mm) Cv* Temperature**

1/4 F250C 0.062 (1.57) 0.08 60,000 (4137)

3/8 F375C 0.062 (1.57) 0.09 60,000 (4137)
9/16 F562C 0.078 (1.98) 0.14 60,000 (4137)

Notes:
* CV values shown are for 2-way straight valve pattern. For 2-way
angle patterns, increase CV value 50%.

** For complete temperature ratings see pressure/temperature rating

guide in Technical Information section.

Generalized Flow Coefficient Curves (Cv)

ALUMINUM BRONZE
POWDER COATED
STAINLESS STEEL
7
PACKING GLAND HANDLE

COLD WORKED TYPE 316 SS 6

BODY IN FIVE PATTERNS
Number of turns open

LOCKING DEVICE
NON-ROTATING 5
STEM

ADJUSTABLE PACKING 4
BELOW THREADS
ANTI-EXTRUSION
BACK-UP RINGS Regulating Stem
3

HIGH PRESSURE 1
CONED-AND-THREADED
CHOICE OF VEE OR
CONNECTIONS Vee Stem
REGULATING STEM TIP
METAL-TO-METAL SEATING 0
10 20 30 40 50 60 70 80 90 100

To ensure proper fit use Autoclave tubing % of rated Cv

Ordering Procedure
For complete information on available stem types, optional connections and additional valve options, see Needle Valve Options section or contact
your Sales Representative. The 60VM Series valves are furnished complete with connection components, unless otherwise specified.

Typical catalog number: 60VM4071

60VM 4 07 1 XX
Valve Outside Diameter Stem/Seat Body Options
Series Tube Size Type Pattern
For extreme
4-1/4 07 - non-rotating 1 - two-way straight
temperature and other
6-3/8 Vee stem (on-off service) 2 - two-way angle options, see Valve
9-9/16 08 - non-rotating 3 - three-way, two on pressure Options.
regulating stem (tapered tip
4 - three-way, one on pressure
for regulating and shutoff)
5 - three-way, two-stem
87 - Vee stem with replaceable
manifold valve
seat
88 - Regulating stem with
replaceable seat

10 All general terms and conditions of sale, including limitations of our liability, apply to all products and services sold.
Valve Options Valve Maintenance
Extreme Temperatures Repair Kits: add R to the front of valve catalog
Standard Parker Autoclave Engineers valves with PTFE packing may number for proper repair kit.
be operated from 0F (-17.8C) to 450F (232C). High temperature (Example: R60VM4071)
packing is available for service from -423F (-252C) to 1200F Valve Bodies: Valve bodies are available. Order using the eight (8)
(649C) by adding the following suffixes to catalog order number. digit part number found in the valve drawing or
contact your Sales Representative for information.
TG - standard valve with PTFE glass packing to 600F (316C). See note below.
Consult your Parker Autoclave Engineers representative for pricing on repair
GY - standard valve with graphite braided yarn packing to 800F (427C).
kits and valve bodies. Refer to the Tools, Installation, Operation and
HT - extended stuffing box valve with graphite braided yarn packing to 1200F (649C). Maintenance section for proper maintenance procedures.
B - standard valve with cryogenic trim material and PTFE packing to -100F (-73C).
LT - extended stuffing box valve with PTFE packing & Cryogenic trim materials to
-423F (-252C).
K - anti-vibration collet and gland assembly.
Note: 40VM and 60VM valves supplied with Peak/PTFE Glass/Peek

Outside Dimensions - inches (mm) Block

Catalog Stem Orifice Thick- Valve
Diameter
Number Type Diameter
Tube A B C D D1 E F G G1 H* M N ness Pattern

2-Way Straight
60VM4071 VEE 1/4 0.062 2.00 1.00 0.50 1.69 1.31 2.12 3.00 1.00 0.22 4.75 0.69 0.38 1.00
60VM4081 REG (6.35) (1.57) (50.80) (25.40) (12.70) (42.93) (33.27) (53.85) (76.20) (25.40) (5.59) (120.65) (17.53) (9.65) (25.40)
60VM6071 VEE 3/8 0.062 2.00 1.00 0.53 1.69 1.31 2.25 3.00 1.00 0.22 4.87 0.69 0.38 1.00 See
60VM6081 REG (9.53) (1.57) (50.80) (25.40) (13.46) (42.93) (33.27) (57.15) (76.20) (25.40) (5.59) (123.70) (17.53) (9.65) (25.40) Figure 1
60VM9071 VEE 9/16 0.078 2.62 1.31 0.72 1.75 1.31 2.50 3.00 1.00 0.28 5.13 0.69 0.38 1.50
60VM9081 REG (14.29) (1.98) (66.55) (33.27) (18.29) (45.45) (33.27) (63.50) (76.20) (25.40) (7.11) (130.30) (17.53) (9.65) (38.10)

2-Way Angle
60VM4072 VEE 1/4 0.062 2.00 1.00 0.50 1.31 2.38 3.00 1.00 0.22 5.00 0.69 0.38 1.00
60VM4082 REG (6.35) (1.57) (50.80) (25.40) (12.70) (33.27) (60.45) (76.20) (25.40) (5.59) (127.00) (17.53) (9.65) (25.40)
60VM6072 VEE 3/8 0.062 2.00 1.00 0.53 1.31 2.62 3.00 1.00 0.22 5.25 0.69 0.38 1.00 See
Figure 2
60VM6082 REG (9.53) (1.57) (50.80) (25.40) (13.46) (33.27) (66.55) (76.20) (25.40) (5.59) (133.35) (17.53) (9.65) (25.40)
60VM9072 VEE 9/16 0.078 2.62 1.31 0.72 1.31 2.81 3.00 1.00 0.28 5.44 0.69 0.38 1.50
60VM9082 REG (14.29) (1.98) (66.55) (33.27) (18.29) (33.27) (71.37) (76.20) (25.40) (7.11) (138.18) (17.53) (9.65) (38.10)

3-Way / 2 on Pressure
60VM4073 VEE 1/4 0.062 2.00 1.00 0.50 1.69 1.31 2.38 3.00 1.00 0.22 4.75 0.69 0.38 1.00
60VM4083 REG (6.35) (1.57) (50.80) (25.40) (12.70) (42.93) (33.27) (60.45) (76.20) (25.40) (5.59) (120.65) (17.53) (9.65) (25.40)
60VM6073 VEE 3/8 0.062 2.00 1.00 0.53 1.69 1.31 2.75 3.00 1.00 0.22 4.87 0.69 0.38 1.00 See
60VM6083 REG (9.53) (1.57) (50.80) (25.40) (13.46) (42.93) (33.27) (68.86) (76.20) (25.40) (5.59) (123.70) (17.53) (9.65) (25.40) Figure 3
60VM9073 VEE 9/16 0.078 2.62 1.31 0.72 1.75 1.31 3.03 3.00 1.00 0.28 5.13 0.69 0.38 1.50
60VM9083 REG (14.29) (1.98) (66.55) (33.27) (18.29) (45.45) (33.27) (76.96) (76.20) (25.40) (7.11) (130.30) (17.53) (9.65) (38.10)

Figure 1 Figure 2 Figure 3

F F F

G1 M G1 M M
G1 M M
M G H N G
H N
H N G
D D1
D
D1
D E E
E C
C C
B B
A B A
A
2-Way Straight 2-Way Angle 3-Way / 2 on Pressure

All general terms and conditions of sale, including limitations of our liability, apply to all products and services sold. 11
Dimensions - inches (mm) Block
Outside
Catalog Stem Orifice Thick- Valve
Diameter
Number Type Diameter
Tube A B C D D1 E F G G1 H* M N ness Pattern

3-Way / 1 on Pressure
60VM4074 VEE 1/4 0.062 2.00 1.00 0.50 1.31 2.38 3.00 1.00 0.22 5.00 0.69 0.38 1.00
60VM4084 REG (6.35) (1.57) (50.80) (25.40) (12.70) (33.27) (60.45) (76.20) (25.40) (5.59) (127.00) (17.53) (9.65) (25.40)
60VM6074 VEE 3/8 0.062 2.00 1.00 0.53 1.31 2.62 3.00 1.00 0.22 5.25 0.69 0.38 1.00 See
60VM6084 REG (9.53) (1.57) (50.80) (25.40) (13.46) (33.27) (66.55) (76.20) (25.40) (5.59) (133.35) (17.53) (9.65) (25.40) Figure 4
60VM9074 VEE 9/16 0.078 2.62 1.31 0.72 1.31 2.81 3.00 1.00 0.28 5.44 0.69 0.38 1.50
60VM9084 REG (14.29) (1.98) (66.55) (33.27) (18.29) (33.27) (71.37) (76.20) (25.40) (7.11) (138.18) (17.53) (9.65) (38.10)

2-Way Angle / Replaceable Seat

60VM4872 VEE 1/4 0.062 2.00 1.00 0.50 1.31 2.12 2.62 3.00 1.00 0.22 6.28 0.69 0.38 1.00
60VM4882 REG (6.35) (1.57) (50.80) (25.40) (12.70) (33.27) (53.85) (66.55) (76.20) (25.40) (5.59) (159.51) (17.53) (9.65) (25.40)
60VM6872 VEE 3/8 0.062 2.00 1.00 0.53 1.31 2.36 2.62 3.00 1.00 0.22 6.52 0.69 0.38 1.00 See
60VM6882 REG (9.53) (1.57) (50.80) (25.40) (13.46) (33.27) (59.94) (66.55) (76.20) (25.40) (5.59) (165.60) (17.53) (9.65) (25.40) Figure 5
60VM9872 VEE 9/16 0.078 2.62 1.31 0.72 1.31 2.68 2.62 3.00 1.00 0.28 6.90 0.69 0.38 1.50
60VM9882 REG (14.29) (1.98) (66.55) (33.27) (18.29) (33.27) (68.07) (66.55) (76.20) (25.40) (7.11) (175.26) (17.53) (9.65) (38.10)

3-Way / 2-Stem Manifold

60VM4075 VEE 1/4 0.062 2.00 1.00 0.50 1.72 1.31 3.44 3.00 1.00 0.22 6.07 0.69 0.38 1.00
60VM4085 REG (6.35) (1.57) (50.80) (25.40) (12.70) (43.69) (33.27) (87.38) (76.20) (25.40) (5.59) (154.18) (17.53) (9.65) (25.40)
60VM6075 VEE 3/8 0.062 2.00 1.00 0.53 1.88 1.31 3.75 3.00 1.00 0.22 6.37 0.69 0.38 1.00 See
60VM6085 REG (9.53) (1.57) (50.80) (25.40) (13.46) (47.75) (33.27) (95.25) (76.20) (25.40) (5.59) (161.80) (17.53) (9.65) (25.40) Figure 6
60VM9075 VEE 9/16 0.078 2.62 1.31 0.72 2.06 1.31 4.12 3.00 1.00 0.28 6.37 0.69 0.38 1.50
60VM9085 REG (14.29) (1.98) (66.55) (33.27) (18.29) (52.32) (33.27) (104.65) (76.20) (25.40) (7.11) (161.80) (17.53) (9.65) (38.10)

Figure 4 Figure 5 Figure 6

F
F F
G1
M M
G1 M G1 M M G
M H N
G N G
H N H D
D1

D E
D D
E D1
E C
C C
B
D1 A
B B
A A

3-Way / 1 on Pressure 2-Way Angle / Replaceable Seat 3-Way / 2 Stem Manifold

12 All general terms and conditions of sale, including limitations of our liability, apply to all products and services sold.
Needle Valves - 100VM & 150V Series
Pressures to 150,000 psi (10350 bar)

Tube Pressure
Outside Rating
Diameter Orifice psi (bar)
Size Connection Size Rated @ Room
Inches Type Inches (mm) Cv* Temperature**

Series 100VM
1/4, 5/16, 3/8 F312C150 0.062 (1.57) .09 100,000 (6895)
Series 150V
5/16 F312C150 0.062 (1.57) .06 150,000 (10342)

Notes:
* CV values shown are for 2-way straight valve pattern. For 2-way
angle patterns, increase CV value 50%.

** For complete temperature ratings see pressure/temperature rating

guide in Technical Information section.

Generalized Flow Coefficient Curves (Cv)

6
Number of turns open

2 100VM
Vee Stem
1
150V
0
10 20 30 40 50 60 70 80 90 100
% of rated Cv

ALUMINUM BRONZE LOCKING

PACKING GLAND DEVICE
POWDER COATED
STAINLESS STEEL
PACKING GLAND HANDLE

NON-ROTATING
COLD WORKED 316/15-5PH STEM
SS BODY IN THREE
PATTERNS
LOCKING DEVICE

NON-ROTATING
STEM ADJUSTABLE PACKING
BELOW THREADS ADJUSTABLE PACKING
BELOW THREADS
ANTI-EXTRUSION
BACK-UP RINGS
15-5PH HIGH STRENGTH
STAINLESS STEEL

Notes: Torque wrench required to operate valves.

METAL-TO-METAL
SEATING

100VM Series 150V Series

To ensure proper fit use Autoclave tubing

All general terms and conditions of sale, including limitations of our liability, apply to all products and services sold. 13
Ordering Procedure
For complete information on available stem types, optional connections and additional valve options, see Needle Valve Options section or contact
your Sales Representative. The 100V Series valves are furnished complete with connection components, unless otherwise specified.

Typical catalog number: 100VM5071

100VM 5 07 1 XX
Valve Outside Diameter Stem Body Options
Series Tube Size Type Pattern
For extreme
*4-1/4 07 - non-rotating 1 - two-way straight
100VM temperature and other
5-5/16 Vee stem (on off service) 2 - two-way angle
150V options, see Valve
*6-3/8 08 - non-rotating regulating 3 - three-way, two on pressure Options.
stem (tapered tip for
* Note: 1/4" and 3/8" for 100VM only. regulating shutoff

Valve Options Valve Maintenance

Extreme Temperatures Repair Kits: add R to the front of valve catalog
Standard Parker Autoclave Engineers valves with PTFE packing may number for proper repair kit.
be operated to 450F (232C), and to 230F (110C) with nylon- (Example: R100VM15071)
leather packing. Valve Bodies: Valve bodies are available. Order using the eight (8)
K - anti-vibration collet and gland assembly. digit part number found in the valve drawing or
contact your Sales Representative for information.
For other packing options consult the factory.
Consult your Parker Autoclave Engineers representative for pricing on repair
kits and valve bodies. Refer to the Tools, Installation, Operation and
Maintenance section for proper maintenance procedures.

Dimensions - inches (mm) Block

Catalog Stem Outside Orifice
Number Type Diameter Thick- Valve
Diameter
Tube A B C D D1 E F G G1 H* M N ness Pattern

2-Way Straight
100VM4071 1/4" (6.35) 0.062 3.00 1.50 0.52 1.75 1.44 2.25 4.00 1.12 0.34 5.32 1.12 0.50 1.38 See
100VM5071 VEE 5/16" (7.93)
100VM6071 3/8" (9.53) (1.57) (76.20) (38.10) (13.21) (44.45) (36.58) (57.15) (101.60) (28.45) (8.64) (135.13) (28.45) (12.70) (35.05) Figure 1

2-Way Angle
100VM4072 1/4" (6.35) 0.062 2.25 1.50 0.52 1.44 3.00 4.00 1.12 0.34 6.05 0.94 0.50 1.38 See
100VM5072 VEE 5/16" (7.93)
100VM6072 3/8" (9.53) (1.57) (57.15) (38.10) (13.21) (36.58) (76.20) (101.60) (28.45) (8.64) (153.67) (23.88) (12.70) (35.05) Figure 2

Figure 1 Figure 2
F F

G1 M M G M G1
G H N
H N
D
D1
D E
E
C C

B B
A A
2-Way Straight 2-Way Angle

14 All general terms and conditions of sale, including limitations of our liability, apply to all products and services sold.
Outside Dimensions - inches (mm) Block
Catalog Stem Orifice Thick- Valve
Diameter
Number Type Diameter
Tube A B C D D1 E F G G1 H* M N ness Pattern

3-Way / 2 On Pressure
100VM4073 1/4" (6.35) 0.062 3.00 1.50 0.52 1.75 1.44 3.25 4.00 1.12 0.34 6.31 1.12 0.50 1.38 See
100VM5073 VEE 5/16" (7.93)
100VM6073 3/8" (9.53) (1.57) (76.20) (38.10) (13.21) (44.45) (36.58) (82.55) (101.60) (28.45) (8.64) (160.27) (28.45) (12.70) (35.05) Figure 3

2-Way Angle/Replaceable Seat

100VM4872 1/4" (6.35) 0.062 2.25 1.50 0.52 1.44 3.00 4.00 1.12 0.34 7.57 0.94 0.50 1.38 See
100VM5872 VEE 5/16" (7.93)
100VM6872 3/8" (9.53) (1.57) (57.15) (38.10) (13.21) (36.58) (76.20) (101.60) (28.45) (8.64) (192.30) (23.88) (12.70) (35.05) Figure 4

2-Way Angle / Replaceable Seat

150V5072 VEE 5/16 0.062 3.75 1.88 .052 2.25 2.63 4.00 1.650 7.12 1.25= See
(7.93) (1.57) (95.25) (47.63) (13.21) (57.15) (66.80) (101.60) (41.91) (180.85) (31.75) Figure 5

Figure 3 Figure 4 Figure 5

F F
=
M G
G1 M M M G1
G
H N G H N C
D
D1 D1 H E
D
E E
D1
C C

B B B
A A A Diameter

3-Way / 2 on Pressure 2-Way Angle / Replaceable Seat 2-Way Angle / Replaceable Seat

=
(2) 1/4"-20 mounting holes 180 apart
and (1) locking device screw 90 apart

All general terms and conditions of sale, including limitations of our liability, apply to all products and services sold. 15
WARNING
FAILURE, IMPROPER SELECTION OR IMPROPER USE OF THE PRODUCTS AND/OR SYSTEMS DESCRIBED HEREIN OR RELATED ITEMS CAN CAUSE DEATH, PERSONAL INJURY
AND PROPERTY DAMAGE.
This document and other information from Parker Hannifin Corporation, its subsidiaries and authorized distributors provide product and/or system options for further investiga-
tion by users having technical expertise. It is important that you analyze all aspects of your application and review the information concerning the product or system in the current
product catalog. Due to the variety of operating conditions and applications for these products or systems, the user, through its own analysis and testing, is solely responsible
for making the final selection of the products and systems and assuring that all performance, safety and warning requirements of the application are met. The products described
herein, including without limitation, product features, specifications, designs, availability and pricing, are subject to change by Parker Hannifin Corporation and its subsidiaries at
any time without notice.

2013 Parker Hannifin Corporation | Autoclave Engineers is a registered trademark of the Parker Hannifin Corporation 02-0113SE January2013

Caution! Do not mix or interchange parts or tubing with those of

other manufacturers. Doing so is unsafe and will void warranty.

P Series
Pressures to 15,000 psi (1034 bar)
Since 1945 Parker Autoclave Engineers has
designed and built premium quality valves, fittings
and tubing. This commitment to engineering and
manufacturing excellence has earned Parker
Autoclave Engineers a reputation for reliable efficient
product performance. Parker Autoclave Engineers
has long been established as the world leader in high
pressure fluid handling components for the
chemical/petrochemical, research, and oil
and gas industries.

Pipe Valve Features:

P Series valve design provides in-line pipe

connections for 1/4 to 1 pipe sizes.
1/8 connections offset.
Rising stem/barstock body design.
Non-rotating stem prevents stem/seat galling (1/8" NPT rotating stem design).

Needle Valves - P Pipe Valve Series

Metal-to-metal seating achieves bubble-tight shut-off, longer stem/seat life in abrasive
flow, greater durability for repeated on/off cycles and excellent corrosion resistance.
PTFE encapsulated packing provides dependable stem and body sealing.
Stem sleeve and packing gland materials have been selected to achieve extended thread
cycle life and reduced handle torque.
Choice of Vee or Regulating stem tips.
Operating temperature range from -423F (-252C) to 400F (204C).

Parker Autoclave Engineers valves are complemented by a complete line of fittings, tubing,
check valves and line filters.

All general terms and conditions of sale, including limitations of our liability, apply to all products and services sold.
www.autoclave.com 1
Valve Series - P Series
Pressures to 15,000 psi (1034 bar)

Tube Pressure
Outside Rating
Diameter Orifice psi (bar)
Size Connection Size Rated @ Room
Inches Type Inches (mm) Cv* Temperature**

1/8 Pipe 0.078 (1.98) 0.11 15,000 (1034)

1/4 Pipe 0.203 (5.16) 0.63 15,000 (1034)
3/8 Pipe 0.219 (5.56) 0.75 15,000 (1034)
1/2 Pipe 0.312 (7.92) 1.30 15,000 (1034)
3/4 Pipe 0.438 (11.13) 2.50 10,000 (690)
1 Pipe 0.562 (14.27) 4.40 10,000 (690)

Notes:
* CV values shown are for 2-way straight valve pattern. For 2-way
angle patterns, increase CV value 50%. (Based on water)
** For complete temperature ratings see pressure/temperature rating
guide in Technical Information section.

Generalized Flow Coefficient Curves (Cv)

6
LOW FRICTION ALUMINUM POWDER COATED
STAINLESS STEEL
BRONZE PACKING GLAND
HANDLE 5 Regulating Stem
Number of turns open

COLD WORKED TYPE 316

SS BODY IN FIVE
PATTERNS
4
LOCKING DEVICE
NON-ROTATING STEM
ROTATING STEM FOR 1/8 3

ANTI-EXTRUSION
BACK-UP RINGS
ADJUSTABLE PACKING
BELOW THREADS
2

1 Vee Stem

0
10 20 30 40 50 60 70 80 90 100
CHOICE OF VEE OR PIPE CONNECTION
METAL-TO-METAL
REGULATING STEM TIP
SEATING % of rated Cv

Ordering Procedure
For complete information on available stem types, optional connections and additional valve options, see Needle Valve Options section or contact
your Sales Representative.

Typical catalog number: 15P4071

15P 4 07 1 XX
Valve Nominal Stem/Seat Body Options
Series Pipe Size Type Pattern
10P-10,000 psi (690 bar) 2-1/8 00 - rotating Vee stem 1 - two-way straight For extreme
4-1/4 (on-off service) temperature and
15P-15,000 psi (1034 bar) 2 - two-way angle other options, see
6-3/8 01 - rotating regulating stem Valve Options.
8-1/2 3 - three-way, two
(tapered tip for regulating
12-3/4 on pressure
and shut off)
16-1 4 - three-way, one
07 - non-rotating Vee stem on pressure
(on-off service)
Note: 3/4" and 1" 10,000 psi (690 bar) max. 5 - three-way, two stem
08 - non-rotating regulating manifold valve
stem (tapered tip for
regulating and shutoff)

2 All general terms and conditions of sale, including limitations of our liability, apply to all products and services sold.
Valve Options Valve Maintenance
Extreme Temperatures Repair Kits: add R to the front of valve catalog
Standard Parker Autoclave Engineers valves with PTFE packing may be number for proper repair kit.
operated to 450F (232C). High temperature packing and/or extended (Example: R15P4071 or R10P12071)
stuffing box is available for service from 0F (-17.8C) to 650F (343C)
Valve Bodies: Valve bodies are available. Order using the eight (8)
by adding the following suffixes to catalog order number. digit part number found on the valve drawing or
TG standard valve with PTFE glass packing to 600F (316C).
GY standard valve with graphite braided yarn packing to 650F (343C). contact your Sales Representative for information.
B standard valve with cryogenic trim material and PTFE packing to Consult your Parker Autoclave Engineers representative for pricing on repair
-100F (-73C). kits and valve bodies. Refer to the Tools, Installation, Operation and Mainte-
LT extended stuffing box valve with PTFE packing and cryogenic trim nance section for proper maintenance procedures.
materials to -423F (-252C).
Parker Autoclave Engineers recommends pipe connections be operated between -423F (-252C) and 400F (204C). For additional valve options, contact your Sales Representative.

Dimensions - inches (mm) Block

Valve
Catalog Stem Pipe Orifice Thick-
Pattern
Number Type Size Diameter A B C D D1 E F G G1 H M N ness

2-Way Straight
15P2001 VEE 1/8 0.078 1.50 0.75 0.56 0.82 1.25 1.75 0.56 0.16 2.53 0.45 0.20 0.63
15P2011 REG (3.18) (1.98) (38.10) (19.05) (14.22) (20.62) (31.75) (44.45) (14.22) (4.06) (64.26) (11.43) (5.16) (15.88)
15P4071 VEE 1/4 0.203 2.00 1.00 1.41 2.00 3.00 0.75 0.22 4.63 0.62 0.38 0.75
15P4081 REG (6.35) (5.16) (50.80) (25.40) (35.81) (50.80) (76.20) (19.05) (5.59) (117.60) (15.75) (9.65) (19.05)
15P6071 VEE 3/8 0.219 2.50 1.25 1.41 2.00 3.00 0.75 0.22 4.63 0.62 0.38 1.00
15P6081 REG (9.53) (5.56) (63.50) (31.75) (35.81) (50.80) (76.20) (19.05) (5.59) (117.60) (15.75) (9.65) (25.4) See
15P8071 VEE 1/2 0.312 3.00 1.50 2.06 2.88 4.00 1.00 0.34 5.93 0.69 0.50 1.38 Figure 1
15P8081 REG (12.70) (7.92) (76.20) (38.10) (52.32) (73.15) (101.60) (25.40) (8.64) (150.62) (17.53) (12.70) (35.05)
10P12071 VEE 3/4 0.437 3.50 1.75 2.63 3.75 10.25 1.12 0.44 7.00 0.88 0.63 1.75
10P12081 REG (19.05) (11.10) (88.90) (44.45) (66.80) (95.25) (260.35) (28.45) (11.18) (177.80) (22.35) (16.00) (44.45)
10P16071 VEE 1 0.562 4.12 2.06 3.31 4.62 10.25 1.62 0.56 9.00 1.25 1.13 1.75
10P16081 REG (25.40) (14.27) (104.65) (52.32) (84.07) (117.35) (260.35) (41.15) (14.22) (228.60) (31.75) (28.70 (44.45)
2-Way Angle
15P2002 VEE 1/8 0.078 1.50 0.75 0.56 1.38 1.75 0.56 0.16 2.66 0.45 0.20 0.63
15P2012 REG (3.18) (1.98) (38.10) (19.05) (14.22) (34.93) (44.45) (14.22) (4.06) (67.56) (11.43) (5.16) (15.88)
15P4072 VEE 1/4 0.203 2.00 1.00 1.41 2.44 3.00 0.75 0.22 4.81 0.62 0.38 0.75
15P4082 REG (6.35) (5.16) (50.80) (25.40) (35.81) (61.98) (76.20) (19.05) (5.59) (122.17) (15.75) (9.65) (19.05)
15P6072 VEE 3/8 0.219 2.50 1.25 1.41 2.44 3.00 0.75 0.22 4.81 0.62 0.38 1.00
15P6082 REG (9.53) (5.56) (63.50) (31.75) (35.81) (61.98) (76.20) (19.05) (5.59) (122.17) (15.75) (9.65) (25.40) See
15P8072 VEE 1/2 0.312 3.00 1.50 2.06 3.38 4.00 1.00 0.34 6.43 0.69 0.50 1.38 Figure 2
15P8082 REG (12.70) (7.92) (76.20) (38.10) (52.32) (85.85) (101.60) (25.40) (8.64) (163.32) (17.53) (12.70) (35.05)
10P12072 VEE 3/4 0.437 3.50 1.75 2.63 4.25 10.25 1.12 0.44 7.50 0.88 0.63 1.75
10P12082 REG (19.05) (11.10) (88.90) (44.45) (66.80) (107.95) (260.35) (28.45) (11.18) (190.50) (22.35) (16.00) (44.45)
10P16072 VEE 1 0.562 4.12 2.06 3.31 5.12 10.25 1.62 0.56 9.00 1.25 1.13 1.75
10P16082 REG (25.40) (14.27) (104.65) (52.32) (84.07) (130.05) (260.35) (41.15) (14.22) (228.60) (31.75) (28.70 (44.45)

3-Way / 2 on Pressure
15P4073 VEE 1/4 0.203 2.00 1.00 1.41 2.62 3.00 0.75 0.22 5.00 0.62 0.38 0.75
15P4083 REG (6.35) (5.16) (50.80) (25.40) (35.71) (66.55) (76.20) (19.05) (5.59) (127.00) (15.75) (9.65) (19.05)
15P6073 VEE 3/8 0.219 2.50 1.25 1.41 2.62 3.00 0.75 0.22 5.00 0.62 0.38 1.00
15P6083 REG (9.53) (5.56) (63.50) (31.75) (35.71) (66.55) (76.20) (19.05) (5.59) (127.00) (15.75) (9.65) (25.40)
15P8073 VEE 1/2 0.312 3.00 1.50 2.06 3.62 4.00 1.00 0.34 6.52 0.69 0.50 1.38 See
15P8083 REG (12.70) (7.92) (76.20) (38.10) (52.40) (91.95) (101.60) (25.40) (8.64) (165.61) (17.53) (12.70) (35.05) Figure 3
10P12073 VEE 3/4 0.437 3.50 1.75 2.65 4.62 10.25 1.12 0.44 7.88 0.88 0.63 1.75
10P12083 REG
(19.05) (11.10) (88.90) (44.45) (67.31) (117.35) (260.35) (28.45) (11.18) (200.15) (22.35) (16.00) (44.45)
10P16073 VEE 1 0.562 4.12 2.06 3.31 5.88 10.25 1.62 0.56 9.75 1.25 1.13 1.75
10P16083 REG (25.40) (14.27) (104.65) (52.32) (84.12) (149.35) (260.35) (41.15) (14.22) (247.65) (31.75) (28.70) (44.45)
G - Packing gland mounting hole drill size * H Dimension is with stem in closed position. For prompt service, Parker Autoclave stocks select products.
G1 - Bracket mounting hole size Consult factory.
Panel mounting drill size: 0.22 all valves. Panel mount screws for the 1/8" NPT are M3.5 x .7 thd. All dimensions for reference only and subject to change.

Figure 1 Figure 2 Figure 3

F
F F

M M G
G1 G1 M M
M M G
G1 H N
N G H
H N
D D D
D D
E E E
D1 FOR
1/8 NPT B
A B
B A
All general terms and conditions of sale, including limitations
A of our liability, apply to all products and services sold. 3
2-Way Straight 2-Way Angle 3-Way /2 on Pressure
Outside Dimensions - inches (mm) Block
Catalog Stem Diameter Orifice Thick- Valve
Number Type Tube Diameter A B C D D1 E F G G1 H* M N ness Pattern

3-Way / 1 on Pressure
15P4074 VEE 1/4 .0203 2.00 1.00 1.41 2.44 3.00 0.75 0.22 4.81 0.62 0.38 0.75
15P4084 REG (6.35) (5.16) (50.80) (25.40) (35.71) (61.98) (76.20) (19.05) (5.59) (122.17) (15.75) (9.65) (19.05)
15P6074 VEE 3/8 0.219 2.50 1.25 1.41 2.44 3.00 0.75 0.22 4.81 0.62 0.38 1.00
15P6084 REG (9.53) (5.56) (63.50) (31.75) (35.71) (61.98) (76.20) (19.05) (5.59) (122.17) (15.75) (9.65) (25.40)
15P8074 VEE 1/2 0.312 3.00 1.50 2.06 3.38 4.00 1.00 0.34 6.31 0.69 0.50 1.38 See
15P8084 REG (12.70) (7.92) (76.20) (38.10) (52.40) (85.85) (101.60) (25.40) (8.64) (160.27) (17.53) (12.70) (35.05) Figure 4
10P12074 VEE 3/4 0.437 3.50 1.75 2.65 4.25 10.25 1.12 0.44 7.50 0.88 0.63 1.75
10P12084 REG (19.05) (11.10) (88.90) (44.45) (67.31) (107.95) (260.35) (28.45) (11.18) (190.50) (22.35) (16.00) (44.45)
10P16074 VEE 1 0.562 4.12 2.06 3.31 5.12 10.25 1.62 0.56 9.09 1.25 1.13 1.75
10P16084 REG (25.40) (14.27) (104.65) (52.32) (84.07) (130.05) (260.35) (41.15) (14.22) (230.89) (31.75) (28.70) (44.45)

3-Way/2-Stem Manifold
15P4075 VEE 1/4 0.203 2.00 1.00 1.69 1.19 3.38 3.00 0.75 0.22 5.75 0.62 0.38 0.75
15P4085 REG (6.35) (5.16) (50.80) (25.40) (42.88) (30.18) (85.85) (76.20) (19.05) (5.59) (146.05) (15375) (9.65) (19.05)
15P6075 VEE 3/8 0.219 2.50 1.25 1.69 1.19 3.38 3.00 0.75 0.22 5.75 0.62 0.38 1.00
15P6085 REG (9.53) (5.56) (63.50) (31.75) (42.88) (30.18) (85.85) (76.20) (19.05) (5.59) (146.05) (15.75) (9.65) (25.40)
15P8075 VEE 1/2 0.312 3.00 1.50 2.56 1.75 5.12 4.00 1.00 0.34 8.05 0.69 0.50 1.38 See
15P8085 REG (12.70) (7.92) (76.20) (38.10) (65.07) (44.45) (130.05) (101.60) (25.40) (8.64) (204.47) (17.53) (12.70) (35.05) Figure 5
10P12075 VEE 3/4 0.437 3.50 1.75 3.25 2.25 6.50 10.25 1.12 0.44 9.75 0.88 0.63 1.75
10P12085 REG (19.05) (11.10)
(88.90) (44.45) (82.55) (57.15) (165.10) (260.35) (28.45) (11.18) (247.65) (22.35) (16.00) (44.45)
10P16075 VEE 1 0.562 4.12 2.06 3.75 2.81 7.50 10.25 1.62 0.56 11.47 1.25 1.13 1.75
10P16085 REG (25.40) (14.27)
(104.65) (52.32) (95.25) (71.42) (190.50) (260.35) (41.15) (14.22) (291.38) (31.75) (28.70) (44.45)

G - Packing gland mounting hole drill size *H Dimension is with stem in closed position. For prompt service, Parker
G - Bracket mounting hole size All dimensions for reference only and subject to change. Autoclave Engineers stocks select
1
Panel mounting drill size: 0.22 all valves. products. Consult factory.

NOTE: NPT (Pipe) Connections:

Figure 4 Figure 5
- NPT threads must be sealed using a high quality PTFE tape and/or
F F
paste product. Refer to thread sealant manufacturer's instructions
on how to apply thread sealant.
G1 G1 M M
- Sealing performance may vary based on many factors such as M M G
G H N
pressure, temperature, media, thread quality, thread material, H N
proper thread engagement and proper use of thread sealant. D D
D D E
- Customer should limit the number of times an NPT fitting is E
assembled and disassembled because thread deformation during
B
assembly will result in deteriorating seal quality over time. When A
using only PTFE tape, consider using thread lubrication to prevent B
A
galling of mating parts.
3-Way/1 on Pressure 3-Way/2-Stem Manifold

WARNING
FAILURE, IMPROPER SELECTION OR IMPROPER USE OF THE PRODUCTS AND/OR SYSTEMS DESCRIBED HEREIN OR RELATED ITEMS CAN CAUSE DEATH, PERSONAL INJURY AND PROPERTY DAMAGE.
This document and other information from Parker Hannifin Corporation, its subsidiaries and authorized distributors provide product and/or system options for further investigation by users having technical
expertise. It is important that you analyze all aspects of your application and review the information concerning the product or system in the current product catalog. Due to the variety of operating conditions
and applications for these products or systems, the user, through its own analysis and testing, is solely responsible for making the final selection of the products and systems and assuring that all performance,
safety and warning requirements of the application are met. The products described herein, including without limitation, product features, specifications, designs, availability and pricing, are subject to change by
Parker Hannifin Corporation and its subsidiaries at any time without notice.

Offer of Sale
The items described in this document are available for sale by Parker Hannifin Corporation, its subsidiaries or its authorized distributors. Any sale contract entered by Parker will be governed by the provisions
stated in Parker's standard terms and conditions of sale (copy available upon request).

2013 Parker Hannifin Corporation | Autoclave Engineers is a registered trademark of the Parker Hannifin Corporation 02-1251SE January2013

Caution! Do not mix or interchange parts or tubing with those of

other manufacturers. Doing so is unsafe and will void warranty.

MVE/MV Series
Pressures to 15,000 psi (1034 bar)

Since 1945 Parker Autoclave Engineers has designed

and built premium quality valves, fittings and tubing.
This commitment to engineering and manufacturing
excellence has earned Parker Autoclave a reputation for
reliable efficient product performance.
Parker Autoclave Engineers has long been established
as the world leader in high pressure fluid handling
components for the chemical/petrochemical, research,
and oil and gas industries.

Mini Valve Features:

Mini valve provides a rugged compact design.

Tubing sizes available are 1/16 and 1/8.
Rising stem/barstock body design.
Metal-to-metal seating achieves bubble-tight shut-off, longer stem/seat life in abrasive
flow, greater durability for repeated on/off cycles and excellent corrosion resistance.
PTFE encapsulated packing provides dependable stem and body sealing.
Stem and packing gland design have been selected to achieve extended thread cycle life

Needle Valves - MVE/MV Series

and reduced handle torque.
Vee stem tip provided.
Available in five body patterns.
Mini valves available with metric tube glands.
Parker Autoclave Engineers valves are complemented by a complete line of mini fittings and
tubing. The MVE/MV Series uses Parker Autoclave Engineers' SpeedBite connection. This
single-ferrule compression sleeve connection delivers fast, easy make-up and reliable bubble-
tight performance in liquid or gas service.
Mini Valves

www.autoclave.com
Needle Valves - MVE/MV Series
Pressures to 15,000 psi (1034 bar)

Tube Pressure
Outside Rating
Diameter Orifice psi (bar)
Size Connection Size Rated @ Room
Inches Type Inches (mm) Cv* Temperature**

1/16 W062 0.055 (1.40) 0.05 15,000 (1034)

1/8 W125 0.078 (1.98) 0.11 15,000 (1034)

Notes:
* CV values shown are for 2-way straight valve pattern. For 2-way
angle patterns, increase CV value 50%. (Based on water)

** For complete temperature ratings see pressure/temperature rating

guide in Technical Information section.

ANODIZED
ALUMINUM HANDLE
316 PACKING
GLAND
M3.5 x .6 SCREW

STEM LOCKING CLIP

SPACER

COLD WORKED
TYPE 316 SS ADJUSTABLE PACKING
BODY IN FIVE BELOW THREADS
PATTERNS

ANTI-EXTRUSION
BACKUP RINGS

SPEEDBITE
"W" TUBE
SPEEDBITE
CONNECTION
"W" TUBE METAL-TO-METAL
CONNECTION VEE STEM TIP SEATING

To ensure proper fit use Parker Autoclave tubing

Ordering Procedure
For complete information on valve options, contact your Sales Representative. MVE Series valves are furnished complete with connection
components, unless otherwise specified.

Typical catalog number: MVE2001

MVE 2 00 1 XX
Valve Outside Diameter Stem Body Options
Series Tube Size Type Pattern
See valve options
MVE - 3/8 Hex tubing 1-1/16 00 - rotating Vee stem 1 - two-way straight
for ratings.
glands 2-1/8 (on-off service) 2 - two-way angle
MV - 10mm Hex tubing 01 - rotating Regulating stem 3 - three-way, two on pressure
glands (tapered tip for regulating 4 - three way, one on pressure
and shut-off)
5 - three-way, two stem
manifold valve

2 All general terms and conditions of sale, including limitations of our liability, apply to all products and services sold.
Valve Options Valve Maintenance
Extreme Temperatures Refer to the Tools, Installation, Operation and Maintenance section for
Standard Parker Autoclave Engineers valves with PTFE packing may proper maintenance procedures.
be operated to 450F (232C). High temperature packing is available
for service from 0F (-17.8C) to 600F (316C) by adding the fol-
lowing suffixes to catalog order number.=
TG standard valve with PTFE glass packing to 600F (316C).

=Parker Autoclave Engineers does not recommend compression sleeve

connections below 0F (-17.8C) or above 650F (343C). For additional valve
options, contact your Sales Representative.

Outside Dimensions - inches (mm) Block

Catalog Stem Diameter Orifice Thick- Valve
Number Type Tube Diameter A B C D D1 E F G G1 H* M N ness Pattern

2-Way Straight
MVE1001 VEE 1/16 0.055 1.38 0.69 0.45 0.81 0.56 1.13 1.75 0.56 0.16 2.38 0.45 0.20 0.56
MV1001 VEE (1.57) (1.40) (34.93) (17.45) (11.43) (20.65) (14.30) (28.58) (44.45) (14.27) (4.04) (60.38) (11.49) (5.16) (14.27) See
MVE2001 VEE 1/8 0.078 1.38 0.69 0.45 0.81 0.56 1.13 1.75 0.56 0.16 2.38 0.45 0.20 0.56 Figure 1
MV2001 VEE (3.18) (1.98) (34.93) (17.45) (11.43) (20.65) (14.30) (28.58) (44.45) (14.27) (4.04) (60.38) (11.49) (5.16) (14.27)

2-Way Angle
MVE1002 VEE 1/16 0.055 1.38 0.69 0.45 0.56 1.38 1.75 0.56 0.16 2.63 0.45 0.20 0.56
MV1002 VEE (1.57) (1.40) (34.93) (17.45) (11.43) (14.30) (34.93) (44.45) (14.27) (4.04) (66.75) (11.49) (5.16) (14.27) See
MVE2002 VEE 1/8 0.078 1.38 0.69 0.45 0.56 1.38 1.75 0.56 0.16 2.38 0.45 0.20 0.56 Figure 2
MV2002 VEE (3.18) (1.98) (34.93) (17.45) (11.43) (14.30) (34.93) (44.45) (14.27) (4.04) (60.38) (11.49) (5.16) (14.27)

3-Way / 2 on Pressure
MVE1003 VEE 1/16 0.055 1.38 0.69 0.45 0.81 0.56 1.44 1.75 0.56 0.16 2.69 0.45 0.20 0.56
MV1003 VEE (1.57) (1.40) (34.93) (17.45) (11.43) (20.65) (14.30) (36.50) (44.45) (14.27) (4.04) (68.30) (11.49) (5.16) (14.27) See
MVE2003 VEE 1/8 0.078 1.38 0.69 0.45 0.81 0.56 1.44 1.75 0.56 0.16 2.69 0.45 0.20 0.56 Figure 3
MV2003 VEE (3.18) (1.98) (34.93) (17.45) (11.43) (20.65) (14.30) (36.50) (44.45) (14.27) (4.04) (68.30) (11.49) (5.16) (14.27)

G - Packing gland mounting hole drill size * H Dimension is with stem in closed position. For prompt service, Parker Autoclave
G1 - Bracket mounting hole size All dimensions for reference only and subject to change. Engineers stocks select products.
Panel mounting screws are M3.5 x .7 thd. Consult factory.
Tube glands are 3/8 hex on standard MVE models
Tube glands are 10mm hex on MV models.

Figure 1 Figure 2 Figure 3

F F F

G1 M M G1 M M M M
G1
G G G
H N H N N
H
D1 D D D
D
E E E
C C C

B
B B
A A A
2-Way Straight 2-Way Angle 3-Way / 2 on Pressure

3-Way / 1 on Pressure
MVE1004 VEE 1/16 0.055 1.38 0.69 0.45 0.56 0.56 1.44 1.75 0.56 0.16 2.69 0.45 0.20 0.56
MV1004 VEE (1.57) (1.40) (34.93) (17.45) (11.43) (14.22) (14.30) (36.50) (44.45) (14.27) (4.04) (68.30) (11.49) (5.16) (14.27) See
MVE2004 VEE 1/8 0.078 1.38 0.69 0.45 0.56 0.56 1.44 1.75 0.56 0.16 2.69 0.45 0.20 0.56 Figure 4
MV2004 VEE (3.18) (1.98) (34.93) (17.45) (11.43) (14.22) (14.30) (36.50) (44.45) (14.27) (4.04) (68.30) (11.49) (5.16) (14.27)

3-Way / 2-Stem Manifold

MVE1005 VEE 1/16 0.055 1.38 0.69 0.45 0.81 0.56 1.63 1.75 0.56 0.16 4.11 0.45 0.20 0.56
MV1005 VEE (1.57) (1.40) (34.93) (17.45) (11.43) (20.65) (14.30) (41.28) (44.45) (14.27) (4.04) (104.44) (11.49) (5.16) (14.27) See
MVE2005 VEE 1/8 0.078 1.38 0.69 0.45 0.81 0.56 1.63 1.75 0.56 0.16 4.11 0.45 0.20 0.56 Figure 5
MV2005 VEE (3.18) (1.98) (34.93) (17.45) (11.43) (20.65) (14.30) (41.28) (44.45) (14.27) (4.04) (104.44) (11.49) (5.16) (14.27)

G - Packing gland mounting hole drill size * H Dimension is with stem in closed position. For prompt service, Parker
G1 - Bracket mounting hole size All dimensions for reference only and subject to change. Autoclave stocks select products.
Panel mounting screws are M3.5 x .7 thd. Consult factory.
Tube glands are 3/8 hex on standard MVE models
Tube glands are 10mm hex on MV models

Figure 4 Figure 5
F F

M M G1 M M
G1 G
G N
H N
D D
D D H E
E
D1
C
A
B B
A

3-Way / 1 on Pressure 3-Way / 2-Stem Manifold

WARNING
FAILURE, IMPROPER SELECTION OR IMPROPER USE OF THE PRODUCTS AND/OR SYSTEMS DESCRIBED HEREIN OR RELATED ITEMS CAN CAUSE DEATH, PERSONAL INJURY
AND PROPERTY DAMAGE.
This document and other information from Parker Hannifin Corporation, its subsidiaries and authorized distributors provide product and/or system options for further investiga-
tion by users having technical expertise. It is important that you analyze all aspects of your application and review the information concerning the product or system in the current
product catalog. Due to the variety of operating conditions and applications for these products or systems, the user, through its own analysis and testing, is solely responsible
for making the final selection of the products and systems and assuring that all performance, safety and warning requirements of the application are met. The products described
herein, including without limitation, product features, specifications, designs, availability and pricing, are subject to change by Parker Hannifin Corporation and its subsidiaries at
any time without notice.

2013 Parker Hannifin Corporation | Autoclave Engineers is a registered trademark of the Parker Hannifin Corporation 02-0114SE January2013

Caution! Do not mix or interchange parts or tubing with those of

other manufacturers. Doing so is unsafe and will void warranty.

Bottle Valve Series

Pressures to 15,000 psi (1034 bar)

Since 1945 Parker Autoclave Engineers has

designed and built premium quality valves, fittings
and tubing. Parker Autoclave Engineers has long
been established as the world leader in high-pres-
sure fluid handling components for the chemical/
petrochemical, research, and oil and gas industries.
Bottle valves are used on sample bottles and cylin-
ders for remote sampling in the oil industry.

Bottle Valve Features:

BTV Series valve design provides male inlet

connections from 1/8" to 1/2" NPT.
Outlet connections in NPT or tube to 1/4".
Rising stem/barstock body design.
Non-rotating stem prevents stem/seat galling.
Metal-to-metal seating achieves bubble-tight shut-

Needle Valves - Bottle Valve Series

off, longer stem/seat life in abrasive flow, greater
durability for repeated on/off cycles and excellent
corrosion resistance.
PTFE encapsulated packing provides dependable
stem and body sealing.
Stem sleeve and packing gland materials have
been selected to achieve extended thread cycle life
and reduced handle torque.
Available with Vee stem tips.
Available in five body patterns.
Parker Autoclave Engineers valves are comple-
mented by a complete line of low pressure fittings,
tubing, check valves and line filters. The Bottle Valve
Series use Parker Autoclave Engineers' SpeedBite
connection. This single-ferrule compression sleeve-
connection delivers fast, easy make-up and reliable
bubble-tight performance in liquid or gas service.
Low Pressure

All general terms and conditions of sale, including limitations of our liability, apply to all products and services sold.
www.autoclave.com 1
Valve Series - BTV Series
Pressures to 15,000 psi (1034 bar)

ALUMINUM HANDLE
PACKING GLAND

LOCKING
COLD WORKED TYPE 316
DEVICE
SS VALVE BODY

NON-ROTATING
STEM

BOTTOM ADJUSTABLE PACKING

WASHER BELOW THREADS

METAL-TO-METAL
SEATING

To ensure proper fit use Autoclave tubing

Ordering Procedure
For complete information on available stem types, optional connections and additional valve options, see Needle Valve Options section or contact
your Sales Representative. BTV Series valves are furnished complete with connection components, unless otherwise specified.

Typical catalog number: BTV4S4P1

BTV 4 S 4 P 1 XX
Valve Male NPT Male NPT Female Female Body Options
Series Position Port Sizes Connection Type Pattern R - Regulating
2-1/8 F - Front 2-1/8 P - NPT 1 - Straight Stem
4-1/4 S - Side 4-1/4 L - Low Pressure 2 - Angle
6-3/8 B - Bottom 6-3/8 3 - 3 Way 2 on
8-1/2 8-1/2 Pressure *2
4 - 3 Way 1 on
*Note: 1 inlet is NPT male Pressure *1
2 inlets are NPT male and 1 female connection

Valve Options Valve Maintenance

Standard Parker Autoclave valves with PTFE packing may be operated Repair Kits: add R to the front of valve catalog
to 450F (232C). number for proper repair kit.
R regulating stem (Example: RBTV4F2L1)
Valve Bodies: Valve bodies are available. Order using the eight (8)
Parker Autoclave Engineers does not recommend compression sleeve con-
nections below 0F (-17.8C) or above 650F(343C). For additional valve digit part number found on the valve drawing or
options, contact your Sales Representative. contact your Sales Representative for information.
Consult your Parker Autoclave Engineers representative for pricing on repair
kits and valve bodies. Refer to the Tools, Installation, Operation and Mainte-
nance section for proper maintenance procedures.

2 All general terms and conditions of sale, including limitations of our liability, apply to all products and services sold.
Dimensions - inches (mm)
Catalog Stem Pipe/ Orifice
Valve
Number Type Tube Diameter A B C D D1 D2 E F G H M Block Thickness Pattern

2-Way Straight
BTV4S4P1 VEE 1/4 0.094 2.00 1.31 0.69 0.82 0.82 1.28 1.50 0.61 3.41 0.56 0.75 See
Side Inlet (6.35) (2.39) (50.80) (33.27) (17.53) (20.83) (20.83) (32.51) (38.10) (15.49) (86.61) (14.22) (19.05) Figure 1

BTV4F2L1 VEE 1/8 0.094 1.50 0.75 0.63 0.81 0.88 1.38 1.50 0.61 3.49 0.56 0.63 See
Front Inlet (3.18) (2.39) (38.10) (19.05) (15.88) (20.57) (22.35) (35.05) (38.10) (15.49) (88.65) (14.22) (16.00) Figure 2

2-Way Angle
BTV4B2L2 VEE 1/8 0.094 2.00 1.00 0.81 1.19 1.63 1.50 0.75 4.75 0.62 0.75 See
Bottom Inlet (3.18) (2.39) (50.80) (25.40) (20.57) (30.23) (41.40) (38.10) (19.05) (120.65) (15.75) (19.05) Figure 3

BTV4B4P2 VEE 1/4 0.203 1.50 1.00 1.25 1.19 1.63 3.00 0.75 5.30 0.62 0.75 See
Bottom Inlet (6.35) (5.16) (38.10) (25.40) (31.75) (30.23) (41.40) (76.20) (19.05) (134.62) (15.75) (19.05) Figure 3

Figure 1 Figure 2 Figure 3

F
F F

M
M M G
H G G H
H
D
D D1 D D2
E
E E

B C
C B C
A A B
A
2-Way Straight 2-Way Straight 2-Way Angle

Dimensions - inches (mm)

Catalog Stem Pipe/ Orifice
Valve
Number Type Tube Diameter A B C D D1 D2 E F G H M Block Thickness Pattern

3-Way/2 on Pressure
BTV4F2L3 VEE 1/8 0.094 1.50 0.75 0.63 0.81 1.06 0.88 1.38 1.50 0.75 3.49 0.50 0.75 See
Front Inlet (3.18) (2.39) (38.10) (19.05) (15.88) (20.57) (26.92) (22.35) (34.93) (38.10) (19.05) (88.65) (12.70) (19.05) Figure 4

3-Way/1 on Pressure
BTV4F2L4 VEE 1/8 0.094 1.50 .75 0.63 0.81 0.81 0.88 1.38 1.50 0.75 3.49 0.50 0.75 See
Front Inlet (3.18) (2.39) (38.10) (19.05) (15.88) (20.57) (20.57) (22.35) (34.93) (38.10) (19.05) (86.66) (12.70) (19.05) Figure 5

Figure 4 Figure 5

F F

M M
G H G H

D D1 D2 D D1 D2
E E

B C B C
A A

3-Way / 2 on Pressure 3-Way / 1 on Pressure

G - Packing gland mounting hole drill size * H Dimension is with stem in closed position. For prompt service, Parker Autoclave
Engineers stocks select products.
Consult factory.
All dimensions for reference only and subject to change.

Offer of Sale
The items described in this document are available for sale by Parker Hannifin Corporation, its subsidiaries or its authorized distributors. Any sale contract entered by Parker will be governed by the provisions
stated in Parker's standard terms and conditions of sale (copy available upon request).

2013 Parker Hannifin Corporation | Autoclave Engineers is a registered trademark of the Parker Hannifin Corporation 02-1248SE January 2013

Caution! Do not mix or interchange parts or tubing with those of

other manufacturers. Doing so is unsafe and will void warranty.

VRMM Series
Pressures to 60,000 psi (4137 bar)
MicroMetering valves are designed for applications
where more precise control of small flows is required
than is possible with a standard regulating stem. Barrel
and Thimble micrometer design permits settings to be
repeated.
Metering is effected by a finely tapered stem acting in a
precisely mated replaceable seat. Very fine stem
position is achieved utilizing a 40 TPI thread. The
Barrel and Thimble are set for proper metering at the
factory.
These valves are designed for metering only and
cannot be used as a shutoff valve. Minimum flow is
factory set and occurs at 0 position. DO NOT
OPERATE THE VALVE BELOW THE ZERO POSITION OR
DAMAGE WILL RESULT. When shutoff action is re-
quired, a correlated shutoff valve from Parker AE series
10V, 30VM or 60VM should be installed in series with
the MicroMetering valve.

MicroMetering Valve Features:

Barrel and Thimble design permits repeatable settings.

Needle Valves - VRMM Series

Barrel divisions every 0.025
25 Thimble divisions, each representing 0.001 stem travel
One revolution = 0.025 stem travel
Cold-worked type 316 stainless steel body with stainless steel packing gland. Stem
and seat are cold-worked type 316 stainless steel.
Packing below stem threads is PTFE for the 10VRMM and 30VRMM valves and nylon-
leather for the 60VRMM. For packing options, see Technical Information Section.
SpeedBite W connections are used on the 10VRMM and Parker AE High Pressure
coned-and-threaded connections on 30VRMM and 60VRMM.
Parker Autoclave Engineers valves are complemented by a complete line of fittings, tubing, check
valves andline filters.
MicroMetering

www.autoclave.com
Needle Valves - MicroMetering
Pressures to 60,000 psi (4137 bar)

Tube Pressure
Outside Rating
Diameter Orifice psi (bar)
Size Connection Size Rated @ Room
Inches Type Inches (mm) Cv Temperature**

10VRMM 1/8 W125 0.062 (1.57) 0.004 15,000 (1034)

30VRMM 1/4 F250C 0.062 (1.57) 0.004 30,000 (2069)
60VRMM 1/4 F250C 0.062 (1.57) 0.004 60,000 (4137)
60VRMM 3/8 F375C 0.062 (1.57) 0.004 60,000 (4137)

.
Note:

** For complete temperature ratings see pressure/temperature rating guide in

Technical Information section

Flow Coefficient (Cv)

0.175
POWDER COATED
STAINLESS STEEL (4.45)
HANDLE
0.150
PACKING GLAND (3.81)
Stem Travel: Inches (mm)

LOCKING DEVICE
0.125
(3.18)
ADJUSTABLE 0.100
PACKING BELOW
THREADS
(2.54)
*NON-ROTATING
STEM 0.075
(1.90)
STAINLESS
0.050
STEEL BODY REPLACEABLE SEAT
(1.27)
0.025
(.64)
0
0.001 0.002 0.003 0.004
Cv

To ensure proper fit use Parker Autoclave Engineers tubing

Ordering Procedure
For complete information on available stem types, optional connections and additional valve options, see Needle Valve Options section or contact
your Sales Representative. VRMM Series valves are furnished complete with connection components, unless otherwise specified.

Typical catalog number: 60VRMM4812

60VRMM 4 81 2 XX
Valve Outside Diameter Stem/Seat Body Options
Series Tube Size Type Pattern
For extreme
10VRMM 2-1/8 81 - Rotating regulating one 2 - two-way angle
temperature and other
30VRMM 4-1/4 piece stem with replaceable seat.
options, see
60VRMM 6-3/8 Valve Options.

NOTE:
Ordering procedure for information only. Models available are shown in tables on next page.

2 All general terms and conditions of sale, including limitations of our liability, apply to all products and services sold.
Valve Options Valve Maintenance
Extreme Temperatures Repair Kits: add R to the front of valve catalog
Standard Parker Autoclave Engineers valves with PTFE packing may be number for proper repair kit.
operated to 450F (232C). High temperature packing and/or extended (Example: R60VRMM)
stuffing box is available for service from -423F (-252C) to 1200F Valve Bodies: Valve bodies are available. Order using the eight (8)
(649C) by adding the following suffixes to catalog order number digit part number found on the valve drawing or
TG - standard valve with PTFE glass packing to 600F (316C). See note below. contact your Sales Representative for information.
GY - standard valve with graphite braided yarn packing to 800F (427C).
HT - extended stuffing box valve with graphite braided yarn packing to 1200F (649C).
B - standard valve with cryogenic trim material and PTFE packing to -100F (-73C). Consult your Parker Autoclave Engineers representative for pricing on repair
kits and valve bodies. Refer to the Tools, Installation, Operation and
LT - extended stuffing box valve with PTFE packing & Cryogenic trim materials to
Maintenance section for proper maintenance procedures.
-423F (-252C).
Note: 60VRMM valves supplied with Peak/PTFE Glass/Peek
Parker Autoclave Engineers does not recommend compression sleeve connec-
tions below 0F (-17.8C) or above 650F (343C). For additional valve options,
contact your Sales Representative.

See Needle Valve options for stem and seat coatings for erosive service.

Outside Dimensions - inches (mm) Block

Catalog Diameter Orifice Thick- Valve
Number Tube Diameter A B C D E F G G1 H* M N ness Pattern

10VRMM2812 1/8 0.062 1.50 0.88 0.31 0.94 1.56 3.00 0.62 0.16 5.06 1.00 0.25 0.75
(3.17) (1.57) (38.10) (22.35) (7.87) (23.87) (39.62) (76.20) (15.74) (4.06) (128.52) (25.40) (6.35) (19.05)
See
Figure 1
* Note: M dimension is distance between holes for mounting bracket.

30VRMM4812 1/4 0.062 2.00 1.00 0.50 1.12 2.00 3.00 0.97 0.22 5.06 0.69 0.50 1.00
(6.35) (1.57) (50.80) (25.40) (12.70) (28.44) (50.80) (76.20) (24.63) (5.58) (128.52) (17.25) (12.70) (25.40)
60VRMM4812 1/4 0.062 2.00 1.00 0.50 1.31 2.63 3.00 0.97 0.22 6.06 0.69 0.38 1.00 See
(6.35) (1.57) (50.80) (25.40) (12.70) (33.27) (66.80) (76.20) (24.63) (5.58) (153.92) (17.25) (9.65) (25.40) Figure 2
60VRMM6812 3/8 0.062 2.00 1.00 0.53 1.31 2.63 3.00 0.97 0.22 6.06 0.69 0.38 1.00
(9.53) (1.57) (50.80) (25.40) (13.46) (33.27) (66.80) (76.20) (24.63) (5.58) (153.92) (17.25) (9.65) (25.40)

G - Packing gland mounting hole drill size * H Dimension is with stem in closed position. For prompt service, Parker
G1 - Bracket mounting hole size All dimensions for reference only and subject to change. Autoclave Engineers stocks select
Panel mounting drill size: 0:22 all valves. products. Consult factory.

Figure 1 Figure 2

F F

G1 G1 M M
G G
H .312
(79.24) H N

D D
M
E E
C
C
N
B B
A
A
10VRMM 30VRMM/60VRMM

All general terms and conditions of sale, including limitations of our liability, apply to all products and services sold. 3
WARNING
FAILURE, IMPROPER SELECTION OR IMPROPER USE OF THE PRODUCTS AND/OR SYSTEMS DESCRIBED HEREIN OR RELATED ITEMS CAN CAUSE DEATH, PERSONAL INJURY
AND PROPERTY DAMAGE.
This document and other information from Parker Hannifin Corporation, its subsidiaries and authorized distributors provide product and/or system options for further investiga-
tion by users having technical expertise. It is important that you analyze all aspects of your application and review the information concerning the product or system in the current
product catalog. Due to the variety of operating conditions and applications for these products or systems, the user, through its own analysis and testing, is solely responsible
for making the final selection of the products and systems and assuring that all performance, safety and warning requirements of the application are met. The products described
herein, including without limitation, product features, specifications, designs, availability and pricing, are subject to change by Parker Hannifin Corporation and its subsidiaries at
any time without notice.

2013 Parker Hannifin Corporation | Autoclave Engineers is a registered trademark of the Parker Hannifin Corporation 02-0115SE January2013

Caution! Do not mix or interchange parts or tubing with those of

other manufacturers. Doing so is unsafe and will void warranty.

PH: 814-860-5700 FAX: 814-860-5811 PH: 353 53 914 1566

www.autoclave.com FAX: 353 53 914 1582 ISO-9001 Certified
Needle Valves
Block and Bleed

MVBB Series
Pressures to 20,000 psi (1379 bar)

Parker Autoclave Engineers series MVBB block and

bleed valve is a two stem manifold valve providing an
economical and convenient method of blocking, bleed-
ing and calibrating pressure transmitters and gauges.
The valve utilizes the mini valve packing and stem
design making it compact and easy to use. The valve
can be surface or panel mounted for safe operation. In
addition, manifold style valves reduce the number of
fittings and space required for installation.

Block and Bleed Features:

MVBB Series valve design provides large valve

performance in a small package
Tubing sizes: 1/4" and 3/8"
Rising stem/barstock body design.
Metal-to-metal seating achieves bubble-tight shut-off, longer stem/seat life in abrasive
flow, greater durability for repeated on/off cycles and excellent corrosion resistance.
PTFE encapsulated packing provides dependable stem and body sealing.
Stem and packing gland design have been selected to achieve extended thread cycle life
and reduced handle torque.

Needle Valves - MVBB Series

Parker Autoclave Engineers valves are complemented by a complete line of fittings, tubings
and accessories. The MVBB Series uses Parker Autoclave Engineers medium pressure con-
nections. This coned and threaded connection provides a reliable bubble-tight seal for depend-
able performance in gas or liquid service.
Block and Bleed

www.autoclave.com
Needle Valves - MVBB Series
Pressures to 20,000 psi (1379 bar)

Tube Pressure
Outside Rating
Diameter Orifice psi (bar)
Size Connection Size Rated @ Room
Inches Type Inches (mm) Cv Temperature**

1/4 SF250CX 0.093 (2.36) 0.20 20,000 (1379)

3/8 SF375CX 0.093 (2.36) 0.20 20,000 (1379)

Notes:

** For complete temperature ratings see pressure/temperature rating

guide in Technical Information section.

VENT
ANODIZED
ALUMINUM HANDLES
LOCKING DEVICE

GAUGE IN

ROTATING
MEDIUM PRESSURE STEM
CONED AND THREADED
CONNECTION
PTFE
PACKING

ANTI-EXTRUSION
BACK UP RINGS

VEE STEM TIP METAL TO METAL SEATING

To ensure proper fit use Autoclave tubing

Valve Options
Extreme Temperatures
Standard Parker Autoclave Engineers valves with PTFE packing may be operated to 450F (232C). High temperature packing is available for
service from 0F (-17.8C) to 800F (427C) by adding the following suffixes to catalog order number.
TG standard valve with PTFE glass packing to 600F (316C)
GY standard valve with Graphite braided yarn packing to 800F (427C).

For additional valve options, contact your Sales Representative.

Note: Refer to the Tools, Installation, Operation and Maintenance section for proper maintenance procedures.

2 All general terms and conditions of sale, including limitations of our liability, apply to all products and services sold.
Outside Dimensions - inches (mm)
Catalog Stem Diameter Orifice
Number Type Tube Diameter A B C D D1 E F G G1 H* M N O P Q

20MVBB4 VEE 1/4 0.094 3.50 0.813 0.38 0.625 0.938 1.50 1.75 0.56 0.281 2.94 2.50 0.485 1.63 .500 2.625
(6.35) (2.39) (88.90) (20.65) (9.65) (15.88) (23.83) (38.10) (44.45) (14.27) (7.14) (74.68) (63.50) (12.32) (41.40) 12.70 66.68
20MVBB6 VEE 3/8 0.094 3.88 1.00 0.44 0.625 0.938 1.50 1.75 0.56 0.281 2.94 2.88 0.50 1.63 .500 2.625
(9.53) (2.39) (98.60) (25.40) (11.10) (15.88) (23.83) (38.10) (44.45) (14.27) (7.14) (74.68) (73.15) (12.70) (41.40) 12.70 66.68

For complete information on available options, contact your Sales representative. MVBB Series valves are furnished with connection
components unless otherwise specified.

M N

Q
O

D H
D1
E

B B
A

All general terms and conditions of sale, including limitations of our liability, apply to all products and services sold. 3
WARNING
FAILURE, IMPROPER SELECTION OR IMPROPER USE OF THE PRODUCTS AND/OR SYSTEMS DESCRIBED HEREIN OR RELATED ITEMS CAN CAUSE DEATH, PERSONAL INJURY
AND PROPERTY DAMAGE.
This document and other information from Parker Hannifin Corporation, its subsidiaries and authorized distributors provide product and/or system options for further investiga-
tion by users having technical expertise. It is important that you analyze all aspects of your application and review the information concerning the product or system in the current
product catalog. Due to the variety of operating conditions and applications for these products or systems, the user, through its own analysis and testing, is solely responsible
for making the final selection of the products and systems and assuring that all performance, safety and warning requirements of the application are met. The products described
herein, including without limitation, product features, specifications, designs, availability and pricing, are subject to change by Parker Hannifin Corporation and its subsidiaries at
any time without notice.

2013 Parker Hannifin Corporation | Autoclave Engineers is a registered trademark of the Parker Hannifin Corporation 02-0116SE January2013

Caution! Do not mix or interchange parts or tubing with those of

other manufacturers. Doing so is unsafe and will void warranty.

PH: 814-860-5700 FAX: 814-860-5811 PH: 353 53 914 1566

www.autoclave.com FAX: 353 53 914 1582 ISO-9001 Certified
Needle Valves
Double Block and Bleed

20DBNV Series
Pressures to 20,000 psi (1379 bar)

Parker Autoclave Engineers series DBNV double block

and bleed valve is a three system manifold valve provid-
ing an economical and convenient method of blocking
and bleeding in applications such as pressure monitor-
ing and test, chemical injection and drain line isolation.
The valve utilizes our standard valve packing and stem
design to make it compact and easy to use. Manifold
style valves reduce the number of fittings and space
required for installation.

Block and Bleed Features:

20DBNV Series valve design provides large valve

performance in a small package.
Tubing sizes: 1/4" to 1".
Rising stem/barstock body design.
Metal-to-metal seating achieves bubble-tight shut-off, longer stem/seat life in abrasive
flow, greater durability for repeated on/off cycles and excellent corrosion resistance.
PTFE encapsulated packing provides dependable stem and body sealing.

Needle Valves - 20DBNV Series

Stem and packing gland design have been selected to achieve extended thread cycle life
and reduced handle torque.
Temperatures from -100F (-73C) to 600F (316C)

Parker Autoclave Engineers' valves are complemented by a complete line of fittings, tubings
and accessories. The 20DBNV Series uses Parker Autoclave Engineers' pressure connections.
This coned and threaded connection provides a reliable bubble-tight seal for dependable
performance in gas or liquid service.
Double Block and Bleed

www.autoclave.com
Needle Valves - 20DBNV Series
Pressures to 20,000 psi (1379 bar)

Tube Pressure
Outside Rating
Diameter Orifice psi (bar)
Size Connection Size Rated @ Room
Inches Type Inches (mm) Cv Temperature**

1/4 SF250CX 0.093 (2.36) 0.10 20,000 (1379)

3/8 SF375CX 0.093 (2.36) 0.27 20,000 (1379)
9/16 F562C 0.093 (2.36) 0.27 20,000 (1379)

Notes:

** For complete temperature ratings see pressure/temperature rating

guide in Technical Information section.

POWDER COATED
ALUMINUM BRONZE
STAINLESS STEEL
PACKING GLAND
HANDLE

COLD WORKED TYPE 316 LOCKING DEVICE

SS BODY
ADJUSTABLE
NON-ROTATING PACKING
STEM BELOW THREADS

ANTI-EXTRUSION
BACK-UP RINGS

PLUGGED

INLET

VEE STEM TIP

HIGH PRESSURE
METAL-TO-METAL SEATING
CONED-AND-THREADED
VENT CONNECTION CONNECTIONS
OUTLET

VENT VALVE

BOTTOM VIEW

To ensure proper fit use Parker Autoclave Engineers tubing

Valve Options
Extreme Temperatures
Standard Parker Autoclave Engineers' valves with PTFE packing may be operated to 450F (232C). High temperature packing is available for
service from 0F (-17.8C) to 800F (427C) by adding the following suffixes to catalog order number.
TG standard valve with PTFE glass packing to 600F (316C).
B standard valve with cryogenic trim material and PTFE packing to -100F (-73C).
For additional valve options, contact your Sales Representative.
Note: Refer to the Tools, Installation, Operation and Maintenance section for proper maintenance procedures.

2 All general terms and conditions of sale, including limitations of our liability, apply to all products and services sold.
Ordering Procedure
For complete information on available end connections, see end connections options below. 20DBNV valves are furnished complete with tube
connections.

Typical catalog number: 20DBNV M4 M4 XXX

20DBNV M4 M4 XXX
Valve Tube Vent Connection Options
Series Connection M4 - SF250CX20 TG - PTFE Glass Packing
20DBNV Double M4 - SF250CX20 (see chart below) B - Cryogenic Trim
Block & Bleed M6 - SF375CX20
-100F (-73C)
Needle Valve H9 - F562C
(see chart below) K - Anti-vibration Collet &
Gland Assembly

Connection Options
Catalog Tube Connection MAWP @ Vent Connection Vent
Number Number Connection Room Temperature Number Connection

20DBNVM4M4 M4 SF250CX20 20,000 psi (1379 bar) M4 SF250CX20

20DBNVM6M4 M6 SF375CX20 20,000 psi (1379 bar) M4 SF250CX20

20DBNVH9M4 H9 F562C 20,000 psi (1379 bar) M4 SF250CX20

MAWP: Maximum Allowable Working Pressure

Valve Options Valve Maintenance

See needle valve options for complete information on available Consult your Parker Autoclave Engineers representative for
stem types, optional connections and additional valve options. pricing on repair kits. Refer to the Operation and Mainte-
For material options consult factory. nance manual for proper maintenance procedures.

All general terms and conditions of sale, including limitations of our liability, apply to all products and services sold. 3
Catalog Stem Pipe Orifice Dimensions - inches (mm)
Number Type Size Dia. A B C D D1 E F G H M N O P Q V X

1/4 0.094 5.25 1.00 0.38 1.50 1.13 2.13 3.00 1.00 4.65 0.69 0.50 0.75 0.63 1.50 1.43 .50
20DBNVM4M4 VEE
(6.35) (2.39) (133.35) (25.40) (9.65) (38.10) (28.70) (54.10) (76.20) (25.40) (118.11) (17.53) (12.70) (19.05) (16.00) (38.10) (36.32) (12.70)

3/8 0.094 5.25 1.00 0.44 1.50 1.13 2.13 3.00 1.00 4.65 0.69 0.50 0.75 0.63 1.50 1.43 .50
20DBNVM6M4 VEE
(9.53) (2.39) (133.35) (25.40) (11.18) (38.10) (28.70) (54.10) (76.20) (25.40) (118.11) (17.53) (12.70) (19.05) (16.00) (38.10) (36.32) (12.70)

9/16 0.094 5.88 1.31 0.53 1.50 1.13 3.00 3.00 1.00 5.53 0.69 0.50 1.38 0.63 1.75 1.43 .75
20DBNVH9M4 VEE
(14.29) (2.39) (149.35) (33.27) (13.46) (38.10) (28.70) (76.20) (76.20) (25.40) (140.46) (17.53) (12.70) (35.05) (16.00) (44.45) (36.32) (19.05)

For complete information on available options, contact your Sales representative. 20DBNV Series valves are furnished with connection
components unless otherwise specified.

G - Packing gland mounting hole drill size

M M H Dimension is with stem in closed position.
C G All dimensions for reference only and subject to change
H
For prompt service, Parker Autoclave Engineers stocks select
D1
D products. Consult factory.
PLUGGED
E
INLET

B N
VENT OUTLET
O B
A X

Q
P
VENT VALVE

V
BOTTOM VIEW

Offer of Sale
The items described in this document are available for sale by Parker Hannifin Corporation, its subsidiaries or its authorized distributors. Any sale contract entered by Parker will be governed by the provisions
stated in Parker's standard terms and conditions of sale (copy available upon request).

2013 Parker Hannifin Corporation | Autoclave Engineers is a registered trademark of the Parker Hannifin Corporation 02-9259BE January 2013

Caution! Do not mix or interchange parts or tubing with those of

other manufacturers. Doing so is unsafe and will void warranty.

Wellhead Gauge Valve

Tube Pressure
Outside Rating
Series Diameter Orifice psi (bar)
Size Connection Size Rated @ Room
Inches Type Inches (mm) Cv Temperature

20GV 3/8 F375C 0.125 (3.18) 0.23 20,000 (1379)

20GV 9/16 SF562CX 0.125 (3.18) 0.23 20,000 (1379)
30GV 9/16 F562C 0.125 (3.18) 0.33 30,000 (2068)

Bleed Valve
20BV 3/8 SM375CX 0.093 (2.36) - 20,000 (1379)
20BV 9/16 SM562CX 0.093 (2.36) - 20,000 (1379)
30BV 9/16 M562C 0.093 (2.36) - 30,000 (2068)*
Notes:
* Rating shown is in closed position.
Rating @ 15,000 psi (1034 bar) in open position. Glands and collars included

Parker Autoclave Engineers Wellhead Gauge valves are Gauge Valve Features:
designed for reliable shut-off service at a maximum work- One inlet, three outlet ports
ing pressure of 30,000 psi (2068 bar). The Wellhead Gauge Metal-to-metal bubble tight shut-off
and Bleed Valves are standard in 316 stainless steel material. Packing below stem threads
Special materials available on request. Two piece non-rotating stem on standard valves

Applications: Bleed Valve Features:

Wellhead Gauge Valve One piece hex construction allows easy installation
Sample Lines Vent port tapped for plumbing to safe area
Instrument calibration Tee handle for easy operation
Positive blow out prevention on stem
Bleed Valve 1/8 NPT outlet connection
Pressure bleed

Ordering Procedure
Typical catalog number: 30GV9078

30GV 9 07 8
Valve Outside Diameter Stem Body
Series Tube Size Type Pattern
20GV 6-3/8 00 - one piece VEE stem 8 - 4 ports, 1 inlet, 3 outlets
30GV 9-9/16 07- non-rotating VEE stem

Bleed Valve
Typical catalog number: 30BV9002

30BV 9 00 2
Valve Outside Diameter Stem Body
Series Tube Size Type Pattern
20BV 6-3/8 00 - one piece VEE stem 2 -Angle
30BV 9-9/16
Wellhead Gauge Valve

Catalog Connection Connection Pressure Rating Dimensions - inches (mm)

Valve
Number Type Size psi (bar) A B C D E F G H J Pattern

SF375CX 3/8 20,000 2.00 3.12 2.00 4.52 1.13 1.00 0.50 0.94 3.00
20GV6078
(1379) (50.80) (79.25) (50.80) (114.80) (28.58) (25.40) (12.70) (23.83) (76.20)
SF562CX 9/16 20,000 2.00 3.88 2.75 4.54 1.31 1.38 0.66 0.94 3.00 See
20GV9078
(1379) (50.80) (98.55) (69.85) (115.31) (33.27) (34.93) (16.76) (23.83) (76.20) Figure 1
F562C 9/16 30,000 2.00 3.88 2.75 4.50 1.31 1.38 0.66 0.94 3.00
30GV9078
(2068) (50.80) (98.55) (69.85) (114.30) (33.27) (34.93) (16.76) (23.83) (76.20)

J
Mounting Dimensions
K L M Dia.
20GV6078 .25 (6.4) .25 (6.4) .28 (7.1)
20GV9078 .38 (9.7) .38 (9.7) .28 (7.1)
D K 30GV9078 .38 (9.7) .38 (9.7) .28 (7.1)

"M" L

A
H
G

F
E
C B Figure 1 - Wellhead Gauge Valve

Bleed Valve

Catalog Connection Connection Pressure Rating Dimensions - inches (mm) Valve

Number Type Size psi (bar) A B C D E Pattern

SM375CX 3/8 20,000 3.23 2.42 1.12 1.38 1.50

E
20BV6002
(1379) (82.04) (61.47) (28.45) (35.05) (38.10)
20BV9002 SM562CX 9/16 20,000 3.68 2.86 1.12 1.38 1.50 D HEX C
A
(1379) (93.47) (76.64) (28.45) (35.05) (38.10) B

M562C 9/16 30,000 3.44 2.61 1.12 1.38 1.50 Connection

Type
30BV9002
(2068) (87.38) (66.29) (28.45) (35.05) (38.10) 1/8 NPT (F)
Connection

Offer of Sale
The items described in this document are available for sale by Parker Hannifin Corporation, its subsidiaries or its authorized distributors. Any sale contract entered by Parker will be governed by the provisions
stated in Parker's standard terms and conditions of sale (copy available upon request).

2013 Parker Hannifin Corporation | Autoclave Engineers is a registered trademark of the Parker Hannifin Corporation 02-1250SE January2013

Caution! Do not mix or interchange parts or tubing with those of

other manufacturers. Doing so is unsafe and will void warranty.

HT, LT and PV Series

Pressures to 60,000 psi (4137 bar)

Parker Autoclave Engineers has two different styles of

valves for extreme temperature. Standard valves can be
supplied with packing for operation from -100F (-73C)
to 800F (427C), or with the addition of an extended
packing housing for operation from -423F (-252C) to
1200F (649C). The extended packing housing provides
the means of removing the packing from the extreme
temperature medium. Machined grooves on the housing
act as a heatsink to remove heat or cold.
The second, which is economically priced, is a modified
standard designed for the power industry. It operates to
1200F (649C) with graphite packing and no extended
packing housing.

Extreme Temperature Valve Features:

The extreme temperature option can be ordered on Applications:
low, medium, high, micro-metering and other valve
Hot well condenser
series.

Needle Valves - HT, LT and PV Series

Super-heated steam hookup/
Reliable long life operation with extended stuffing measurement
box at very high and low temperatures.
Supercritical fluid processing
Design available for operation to 1200F (649C) Boiler ignition system
without extended packing housing.
Available with a variety of tubing connections and
orifice sizes.
Non-rotating stem.
Wide range of material options
Adjustable packing below threads.
Metal to metal seating.
Anti-extrusion back-up rings.
Parker Autoclave Engineers valves are complemented by
a complete line of fittings, tubing, and accessories.
Extreme Temperature

www.autoclave.com
Needle Valve - HT, LT Series
Standard Valve with Stuffing Box option - Pressures to 60,000 psi (4137 bar)

High Temperature Valves to 1200F (649C) Cryogenic Valves to -423F (256C)

High Temperature Packing Option Low Temperature Trim Materials Option B
Standard Parker Autoclave Engineers valves can be operated up to While all WETTED parts in most Parker AE valves are type 316SS,
800F (427C) at the packing with appropriate packing materials. some TRIM parts are constructed of mechanically preferable materi-
See table in Technical Section for temperature ratings and ordering als. For low temperature to -100F (-73C), type 316SS trim parts
information. and PTFE packing can be furnished (except Series 100V and 150V).
High Temperature Extended Stuffing Box Option HT To order, add suffix B to valve order number.
For operation above 800F (427C) at the packing, optional extended Cryogenic Extended Stuffing Box Option LT
stuffing box removes packing and stem threads from the hot zone. For operation below -100F (-73C) or for rigorous cycling, an
The HT option is standard graphite-yarn packing; add HT to valve extended stuffing box removes packing from the extreme low tem-
order number. For other packing materials, add both HT and the perature zone. The LT option also includes many type 316 SS trim
suffix for the desired packing material (See table in Technical Sec- parts and PTFE packing. Add LT suffix to valve order number.
tion).
High or Low Temperature Air Operated Valves with extended
stuffing box can be ordered by adding suffix HT to Air Operated Valve O.D. Tube Size DimensionA
Valve order number. Series inches inches (mm)

1/8 5.38 (136.65)

10V 1/4 5.94 (150.87)
3/8 5.94 (150.87)
1/2 5.94 (150.87)

1/4 5.50 (139.70)

POWDER COATED
STAINLESS STEEL SW 3/8 5.50 (139.70)
HANDLE
1/2 6.31 (160.27)
PACKING GLAND
1/4 5.50 (139.70)
10SM 3/8 5.50 (139.70)
& 9/16 6.31 (160.27)
ANTI-EXTRUSION 20SM 3/4 6.31 (160.27)
BACK-UP RINGS LOCKING NUT 1 6.31 (160.27)
PACKING LOCATED OUT
OF TEMPERATURE 30SC 1 9.52 (241.80)
A
EXTENDED STUFFING 1/4 5.94 (150.87)
BOX
30VM 3/8 5.94 (150.87)
NON-ROTATING 9/16 5.94 (150.87)
STEM

40VM 9/16 6.19 (157.22)

LOCKING DEVICE
VALVE BODY IN
FIVE SERIES 1/4 5.87 (149.10)
60VM 3/8 5.94 (150.87)
9/16 6.19 (157.22)
LENSE RING
SEAL 10VRMM 1/8 5.38 (136.65)

30VRMM 1/4 5.94 (150.87)

1/4 6.06 (153.92)

60VRMM
3/8 6.06 (153.92)
Note: Caution should be exercised in proper selection of medium pressure tubing based on actual
operating conditions. Two series available: 10,000 psi (690 bar) and 20,000 psi (1379 bar).
Handle Extenders are available to facilitate extreme temperature operation of valves and for remote
actuation through an insulating wall or barricade. See appropriate valve ordering section.
* See Valve Actuators section.
All dimensions for reference only and subject to change.

2 All general terms and conditions of sale, including limitations of our liability, apply to all products and services sold.
Needle Valve - PV Series
Pressures to 6,000 psi (414 bar)

Pressure
Rating
Tube psi (bar)
Outside Connection Orifice @ Room
Diameter Type Size Temperature**

1/4 TW/PW 3/16 6,000 (414)

3/8 TW/PW 1/4 6,000 (414)
1/2 TW/PW 1/4 6,000 (414)
3/4 TW/PW 1/2 6,000 (414)
10mm TW 6.50mm 6,000 (414)
12mm TW 6.50mm 6,000 (414)
14mm TW 6.50mm or 9.0mm 6,000 (414)
16mm TW 9.00mm or 11.0mm 6,000 (414)

TW - Tube Weld
PW - Pipe Weld
Note: ** For temperature ratings see pressure/temperature rating guide
chart below..

POWDER COATED
STAINLESS STEEL
PACKING GLAND HANDLE

COLD WORKED TYPE 316

SS BODY
LOCKING DEVICE
NON-ROTATING
STEM

ANTI-EXTRUSION
BACK-UP RINGS ADJUSTABLE PACKING
BELOW THREADS

INLET OUTLET

CHOICE OF VEE OR
REGULATING STEM TIP METAL-TO-METAL WELDED CONNECTION
SEATING

See Technical Information section for curve details.

Ordering Procedure
For complete information on available stem types, optional connections and additional valve options, see Needle Valve Options section or contact
your Sales Representative.

Typical catalog number: PV4TW6MG

PV 4 TW Outlet
See Note
6M G
Valve Outside Diameter Connection Size/Type Port Packing
Series Tube Size Type Size
4-1/4 TW - Tube Socket Weld 3 -3/16 G - Graphic Yarn
6-3/8
PW - Pipe Socket Weld 4 -1/4 GF - Grafoil
8-1/2
12- 3/4 8 -1/2
A-10mm 6M - 6.5mm
B-12mm
C-14mm 9M - 9.0mm
D-16mm 11M - 11.0mm

Note: Use if outlet connection is different - Example: PV4TWATW6M-G

All general terms and conditions of sale, including limitations of our liability, apply to all products and services sold. 3
Valve Options Valve Maintenance
For optional connection sizes, connection types,material or other Repair Kits: add R to the front of valve catalog
options not listed contact your sales representative. number for proper repair kit.
Consult factory for availability of dissimilar end connections. (Example: RPV4TWG)
Valve Bodies: Valve bodies are available. Order using the eight (8)
digit part number found on the valve drawing or
contact your Sales Representative for information.

Consult your Parker Autoclave Engineers representative for pricing on repair

kits and valve bodies. Refer to the Tools, Installation, Operation and Mainte-
nance section for proper maintenance procedures.

Outside Dimensions - inches (mm) Block

Catalog Stem Diameter Orifice Thick- Valve
Number Type Tube Diameter A B C D D1 E F G G1 H* M N ness Pattern

2-Way Straight
1/4 0.187 2.00 1.00 1.41 1.41 2.00 3.00 0.75 0.22 4.43 0.62 0.38 0.75
PV4TW3G VEE
(6.35) (4.75) (50.80) (25.40) (35.81) (35.81) (50.80) (76.20) (19.05) (5.59) (112.52) (15.75) (9.65) (19.05)
PVT6TW4G VEE 3/8 0.250 2.00 1.00 1.41 1.41 2.00 3.00 0.75 0.22 4.43 0.62 0.38 0.75
(9.53) (6.35) (50.80) (25.40) (35.81) (35.81) (50.80) (76.20) (19.05) (5.59) (112.52) (15.75) (9.65) (19.05) See
Metric (In) Figure 1

PVCTW6MG VEE 14.00 6.5 50.80 25.40 35.81 35.81 50.80 76.20 19.05 5.59 111.00 15.75 9.65 19.05
(0.55) (0.26) (2.00) (1.00) (1.41) (1.41) (2.00) (3.00) (0.75) (0.22) (4.37) (0.62) (0.38) (0.75)
PVCTW9MG VEE 14.00 9.0 63.50 31.75 52.32 52.32 73.15 101.60 22.23 5.59 148.34 17.53 12.70 25.40
(0.55) (0.35) (2.50) (1.25) (2.06) (2.06) (2.88) (4.00) (0.88) (0.22) (5.84) (0.69) (0.50) (1.00)

G - Packing gland mounting hole drill size * H Dimension is with stem in closed position. For prompt service, Parker
G1 - Bracket mounting hole size All dimensions for reference only and subject to change. Autoclave Engineers stocks select
Panel mounting drill size: 0.22 all valves. products. Consult factory.
Figure 1
F

G1
M M
G
H N

D D1
E
B
A
2-Way Straight

Offer of Sale
The items described in this document are available for sale by Parker Hannifin Corporation, its subsidiaries or its authorized distributors. Any sale contract entered by Parker will be governed by the provisions
stated in Parker's standard terms and conditions of sale (copy available upon request).

2013 Parker Hannifin Corporation | Autoclave Engineers is a registered trademark of the Parker Hannifin Corporation 02-0117SE January2013

Caution! Do not mix or interchange parts or tubing with those of

other manufacturers. Doing so is unsafe and will void warranty.

Caution! Parker Autoclave Engineers Valves, Fittings and Tools are

Instrumentation Products Division Parker Hannifin Manufacturing Ltd.
not designed to work with common commercial instrument tubing
Autoclave Engineers Operation Instrumentation Products Division, Europe
and will only work with tubing built to Parker Autoclave Engineers
8325 Hessinger Drive Industrial Estate Whitemill AES Specifications. Failure to do so will void warranty.
Erie, Pennsylvania 16509-4679 USA Wexford, Republic of Ireland
PH: 814-860-5700 FAX: 814-860-5811 PH: 353 53 914 1566
www.autoclave.com FAX: 353 53 914 1582 ISO-9001 Certified
Needle Valves
Diverter

20DV Series
Pressures to 20,000 psi (1379 bar)

Parker Autoclave Engineers diverter valves provide the

ability to direct incoming flow to one of two outlets. Flow
is changed by rotating the handle in or out causing a
double-ended stem to block the flow path to the outlet
not needed. Diverter valves eliminate the need for
multiple valves and the possibility of error in flow
direction changes.

AE Diverter Valve Features:

Diverts incoming flow to one of two outlet lines.

Tubing sizes from 9/16 to 1.
Rising stem/barstock body design.
Non-rotating stem prevents stem/seat galling.
Metal-to-metal seating achieves bubble-tight shut-off, longer stem/seat life in abrasive
flow, greater durability for repeated on/off cycles and excellent corrosion resistance.
PTFE encapsulated packing provides dependable stem and body sealing.
Stem sleeve and packing gland materials have been selected to achieve extended thread
cycle life and reduced handle torque.

Needle Valves - 20DV Series

Parker Autoclave Engineers valves are complemented by a complete line of fittings, tubing, and
accessories. The 20DV series uses Parker Autoclave Engineers' medium pressure connection.
This coned and threaded connection provides a reliable bubble-tight seal for dependable perfor-
mance to 20,000 psi (1379).
Diverter

www.autoclave.com
Valve Series - 20DV Series
Pressures to 20,000 psi (1379 bar)

Tube
Outside Pressure
Diameter Orifice psi (bar)
Size Connection Size Rated @ Room
Inches Type Inches (mm) Cv Temperature**

9/16 SF562CX 0.359 (9.12) 1.5 20,000 (1379)

3/4 SF750CX 0.516 (13.10) 2.9 20,000 (1379)
1 SF1000CX 0.562 (14.27) 4.5 20,000 (1379)

Notes:

** For complete temperature ratings see pressure/temperature rating

guide in Technical Information section.

STAINLESS STEEL
TEE HANDLE
(1" & 3/4" MODELS Generalized Flow Coefficient Curves (Cv)
ALUMINUM BRONZE
ONLY) 8
PACKING GLAND

LOCKING DEVICE COLD WORKED

7
316 SS BODY
6
Number of turns open

ADJUSTABLE 5
PACKING BELOW NON-ROTATING
THREADS STEM
4

3
UPPER VEE STEM
2
SLIMLINE CONED AND
THREADED 1 Diverter Valve
CONNECTIONS
LOWER STEM
0
10 20 30 40 50 60 70 80 90 100
% of rated Cv

To ensure proper fit use Parker Autoclave Engineers tubing

Ordering Procedure
For complete information on available stem types, optional connections and additional valve options, see Needle Valve Options section or contact
your Sales Representative. The 20DV Series valves are furnished complete with connection components, unless otherwise specified.

Typical catalog number: 20DV16077

20DV 16 07 7 XX
Valve Outside Diameter Stem Body Options
Series Tube Size Type Pattern
7 - diverter For extreme
9-9/16 07 - non-rotating
temperature and other
12-3/4 Vee stem (on off service)
options, see
16-1
Valve Options.

2 All general terms and conditions of sale, including limitations of our liability, apply to all products and services sold.
Valve Options Valve Maintenance
Extreme Temperatures Repair Kits: add R to the front of valve catalog
Standard Parker Autoclave Engineers valves with PTFE packing may number for proper repair kit.
be operated to 450F (232C). High temperature packing and/or (Example: R20DV16077)
extended stuffing box is available for service from -423F (-252C) Valve Bodies: Valve bodies are available. Order using the eight (8)
to 1200F (649C) by adding the following suffixes to catalog order digit part number found on the valve drawing or
number. contact your Sales Representative for information.
HT extended stuffing box valve with graphite braided yarn packing Consult your Parker Autoclave Engineers representative for pricing on repair
to 1200F (648C). kits and valve bodies. Refer to the Tools, Installation, Operation and Mainte-
B standard valve with cryogenic trim materials and PTFE packing to nance section for proper maintenance procedures.
-100F (-73C).
LT extended stuffing box valve with PTFE packing and cryogenic trim
materials to -423F (-252C).
K anti-vibe collet gland assembly.

Outside Dimensions - inches (mm) Block

Catalog Stem Diameter Orifice Thick- Valve
Number Type Tube Diameter A B C D D1 E F G G1 H* M N ness Pattern

20DV9077 VEE 9/16 0.359 2.50 1.25 0.53 2.41 1.75/1.63 4.69 4.00 1.00 0.34 8.88 0.69 0.50 1.00
(14.29) (9.12) (63.50) (31.75) (13.46) (61.21) (44.45/41.40) (119.13) (101.60) (25.40) (8.64) (225.55) (17.53) (12.70) (25.40)
20DV12077 VEE 3/4 0.516 3.00 1.50 0.62 3.00 2.13/1.81 5.69 10.25 1.12 0.44 10.12 0.88 0.62 1.38 See
(19.05) (13.11) (76.20) (38.10) (15.75) (76.20) (54.10/45.97) (144.53) (260.35) (28.45) (11.18) (257.05) (22.35) (15.75) (35.05) Figure 1
20DV16077 VEE 1 0.562 4.12 2.06 0.72 3.75 2.81/2.62 7.25 10.25 1.62 0.56 12.79 1.25 1.12 1.75
(25.40) (14.27) (104.65) (52.33) (18.29) (95.25) (71.37/66.55) (184.15) (260.35) (41.15) (14.22) (324.87) (31.75) (28.45) (44.45)

G - Packing gland mounting hole drill size * H Dimension is with stem in closed position. For prompt service, Parker
G1 - Bracket mounting hole size All dimensions for reference only and subject to change. Autoclave Engineers stocks select
Panel mounting drill size: 0.22 all valves. products. Consult factory.

Figure 1
F

G1
M M
H
N G

D1
D
E

N B C
A
Diverter 20DV Series

Offer of Sale
The items described in this document are available for sale by Parker Hannifin Corporation, its subsidiaries or its authorized distributors. Any sale contract entered by Parker will be governed by the provisions
stated in Parker's standard terms and conditions of sale (copy available upon request).

2013 Parker Hannifin Corporation | Autoclave Engineers is a registered trademark of the Parker Hannifin Corporation 02-0118SE January2013

Caution! Do not mix or interchange parts or tubing with those of

other manufacturers. Doing so is unsafe and will void warranty.

Y Series
Pressures to 50,000 psi (3447 bar)

Parker Autoclave Engineers yoke valves are extra heavy-

duty, plant grade instrument valves for industrial and
severe service applications. Yoke valves feature low
closing torque for ease of operation and are designed for
use with Parker Autoclave Engineers medium and high
pressure tubing and fittings.

Yoke Valve Features:

Tubing sizes from 9/16 to 1.

Rising stem/barstock body design.
Non-rotating stem prevents stem/seat galling.
Metal-to-metal seating achieves bubble-tight shut-
off, longer stem/seat life in abrasive flow, greater
durability for repeated on/off cycles and excellent
corrosion resistance.
PTFE encapsulated packing provides dependable stem and body sealing.
Stem sleeve and packing gland materials have been selected to achieve extended thread
cycle life and reduced handle torque.
Choice of Vee or Regulating stem tips.
Available in two body patterns.
Optional materials for cryogenic and other applications.

Needle Valves - Y Series

Parker Autoclave Engineers valves are complemented by a complete line of fittings, tubing,
and accessories.
Yoke

www.autoclave.com
Valve Series - Y Series
Pressures to 50,000 psi (3447 bar)

Tube
Outside Pressure
Diameter Orifice psi (bar)
Size Connection Size Rated @ Room
Inches Type Inches (mm) Cv * Temperature**

9/16 F562C 0.188 (4.76) 0.66 50,000 (3447)

3/4 SF750CX 0.438 (11.13) 2.41 15,000 (1034)
1 SF1000CX 0.562(14.27) 3.15 15,000 (1034)
1 F1000C43 0.375 (9.53) 2.3 43,000 (2965)

Notes:
* CV values shown are for 2-way straight valve pattern. For 2-way
angle patterns, increase CV value 50%.

** For complete temperature ratings see pressure/temperature rating

guide in Technical Information section.

STAINLESS STEEL
TEE HANDLE Generalized Flow Coefficient Curves (Cv)
(except 9/16 replaceable seat)
7

6
NON-ROTATING
Number of turns open

STEM
PACKING GLAND 5 15Y & 43Y
TYPE 316 SS Vee Stem
BONNET
COLD WORKED 4
TYPE 316 SS 15Y & 43Y
BODY
Regulating Stem
3
ADJUSTABLE 50Y Regulating
PACKING BELOW Stem
THREADS 2

1 50Y Vee Stem

0
AE MEDIUM PRESSURE
CONED-AND-THREADED CONNECTIONS ON
10 20 30 40 50 60 70 80 90 100
SERIES 15Y, AE HIGH PRESSURE ON 50Y AND
% of rated Cv

To ensure proper fit use Parker Autoclave Engineers tubing

Ordering Procedure
For complete information on available stem types, optional connections and additional valve options, see Needle Valve Options section or contact
your Sales Representative. The Y Series valves are furnished complete with connection components, unless otherwise specified.

Typical catalog number: 50Y9071

50Y 9 07 1 XX
Valve Outside Diameter Stem/Seat Body Options
Series Tube Size Type Pattern
9-9/16 07 - non-rotating TG - PTFE Glass
15Y 1 - two-way straight
12-3/4 Packing
43Y Vee stem (on-off service) 2 - two-way angle
50Y 16-1.0 B - Cryogenic
08 - non-rotating Trim and PTFE
Regulating stem (tapered tip for Packing
Regulating and shutoff) See Valve options
87 - Vee stem with replaceable seat for ratings

88 - Regulating stem with

replaceable seat

Outside Dimensions - inches (mm) Block

Catalog Stem Diameter Orifice Thick- Valve
Number Type Tube Diameter A B C D D1 E F G G1 H* M N ness Pattern

2-Way Straight
15Y12071 VEE 3/4 0.438 3.00 1.50 0.63 .75 1.50 3.50 8.00 0.28 9.38 1.13 0.88 1.38
15Y12081 REG (19.05) (11.13) (76.20) (38.10) (15.88) (19.05) (38.10) (88.90) (203.20) (7.11) (238.25) (28.58) (22.23) (34.93)
15Y16071 VEE 1.00 0.562 4.13 2.06 0.63 .88 1.88 4.13 10.25 0.28 10.00 1.50 1.13 1.75
15Y16081 REG (25.40) (14.27) (104.78) (52.39) (15.88) (22.35) (47.75) (104.78) (260.35) (7.11) (254.00) (38.10) (28.58) (44.45) See
43Y16071 VEE 1.00 0.375 4.13 2.07 0.72 1.00 1.88 4.13 10.25 0.28 9.56 1.50 1.00 1.75 Figure 1
43Y16081 REG (25.40) (9.53) (104.90) (52.45) (18.29) (25.40) (47.75) (104.78) (260.35) (7.11) (242.82) (38.10) (25.40) (44.45)
50Y9071 VEE 9/16 0.188 3.00 1.50 0.56 .688 1.25 3.25 13.00 0.50 8.69 1.13 0.88 1.38
50Y9081 REG (14.27) (4.78) (76.20) (38.10) (14.27) (17.48) (31.75) (82.55) (330.20) (12.70) (220.73) (28.58) (22.23) (34.93)

2-Way Angle
15Y12072 VEE 3/4 0.438 3.00 1.50 0.63 1.75 3.75 8.00 0.28 9.63 1.13 0.88 1.38
15Y12082 REG (19.05) (11.13) (76.20) (38.10) (15.88) (44.45) (95.25) (203.20) (7.11) (244.48) (28.58) (22.23) (34.93)
15Y16072 VEE 1.00 0.562 4.13 2.06 0.63 2.25 4.50 10.25 0.28 10.38 1.50 1.13 1.75
15Y16082 REG (25.40) (14.27) (104.90) (52.39) (15.88) (57.15) (114.30) (260.35) (7.11) (263.53) (38.10) (28.58) (44.45) See
43Y16072 VEE 1.00 0.375 4.13 2.07 0.72 2.31 4.56 10.25 0.28 10.80 1.50 1.00 1.75 Figure 2
43Y16082 REG (25.40) (9.53) (104.90) (52.45) (18.29) (58.67) (115.82) (260.35) (7.11) (274.32) (38.10) (25.40) (44.45)
50Y9072 VEE 9/16 0.188 3.00 1.50 0.56 1.50 3.50 13.00 0.50 8.81 1.13 0.88 1.38
50Y9082 REG (14.27) (4.78) (76.20) (38.10) (14.27) (38.10) (88.90) (330.20) (12.70) (223.82) (28.58) (22.23) (34.93)

2-Way Angle/Replaceable Seat

15Y12872 VEE 3/4 0.438 3.00 1.50 0.63 2.06 4.00 8.00 0.28 11.31 1.13 0.88 1.38
15Y12882 REG (19.05) (11.13) (76.20) (38.10) (15.88) (52.32) (101.60) (203.20) (7.11) (287.27) (28.58) (22.23) (34.93)
15Y16872 VEE 1.00 0.562 4.13 2.06 0.63 2.06 4.13 10.25 0.28 11.75 1.50 1.03 1.75
15Y16882 REG (25.40) (14.27) (104.78) (52.39) (15.88) (52.32) (104.78) (260.35) (7.11) (298.45) (38.10) (26.16) (44.45) See
43Y16872 VEE 1.00 0.375 4.13 2.07 0.72 2.13 4.38 10.25 0.28 11.95 1.50 1.00 1.75 Figure 3
43Y16882 REG (25.40) (9.53) (104.78) (52.45) (18.29) (54.10) (111.25) (260.35) (7.11) (303.53) (38.10) (25.40) (44.45)
50Y9872 VEE 9/16 0.188 3.00 1.50 0.56 1.38 3.38 4.00 0.28 12.12 1.13 1.06 1.38
50Y9882 REG (14.27) (4.78) (76.20) (38.10) (14.27) (35.05) (85.73) (101.60) (7.11) (307.85) (28.58) (26.97) (34.93)

G - Bracket mounting hole size * H Dimension is with stem in closed position. For prompt service, Parker Autoclave
All dimensions for reference only and subject to change. Engineers stocks select products.
Consult factory.

Figure 1 Figure 2 Figure 3

F F F

H H
H G1
G1 N
G1 N
N
D E
D E
D1 E
D

B C
M M B C B C
A M M M M
A A

2-Way Straight 2-Way Angle 2-Way Angle/Replaceable Seat

Offer of Sale
The items described in this document are available for sale by Parker Hannifin Corporation, its subsidiaries or its authorized distributors. Any sale contract entered by Parker will be governed by the provisions
stated in Parker's standard terms and conditions of sale (copy available upon request).

2013 Parker Hannifin Corporation | Autoclave Engineers is a registered trademark of the Parker Hannifin Corporation 02-0119SE January2013

Caution! Do not mix or interchange parts or tubing with those of

other manufacturers. Doing so is unsafe and will void warranty.

Instrumentation Products Division Parker Hannifin Manufacturing Ltd. Caution! Parker Autoclave Engineers Valves, Fittings and Tools are
not designed to work with common commercial instrument tubing
Autoclave Engineers Operation Instrumentation Products Division, Europe
and will only work with tubing built to Parker Autoclave Engineers
8325 Hessinger Drive Industrial Estate Whitemill AES Specifications. Failure to do so will void warranty.
Erie, Pennsylvania 16509-4679 USA Wexford, Republic of Ireland
PH: 814-860-5700 FAX: 814-860-5811 PH: 353 53 914 1566
www.autoclave.com FAX: 353 53 914 1582 ISO-9001 Certified
Needle Valves
Options
Parker Autoclave Engineers Needle Valves can be
supplied with a number of options to meet your
requirements. These include various materials of
construction, packing material, high temperature
packing, handle colors, stem options, custom
valves, pneumatic actuators, and a number of other
options.

The following pages provide details on these

options. For additional or technical information not
found in this section, please consult the factory or
local distributor.

Needle Valves - Options

www.autoclave.com
Needle Valves - Stem Options
Three Stem Types

Three types of stems are offered by Parker Autoclave Engineers: Vee, Regulating and MicroMetering. Both
Vee and Regulating stems are interchangable on most Parker AE valves and provide bubble-tight shut-off
against liquids and gases.

VEE Stem Regulating Stem MicroMetering Stem

The Vee stem is used for direct on-off, In some applications, more precise flow Where precise control of small flows
metal-to-metal shut-off with quick- control is required than is possible with is required, Autoclave offers special
opening flow characteristics. a Vee stem. For these cases, Autoclave MicroMetering valves. For complete
offers a non-rotating, two-piece regulat- information on MicroMetering valves,
ing stem which can be used for both refer to Micro-Metering in the Needle
control and shut-off. This stem has a Valve section.
4 taper at the tip in conjunction with a
standard 60 section for shut-off. While
it is not as precise as the control as-
sociated with the MicroMetering stem,
especially with smaller flows, it does
offer substantially better control than
the Vee stem.

Optional Materials

To order optional materials for wetted parts, add the following designations to the order number.

316L Type 316 extra low carbon stainless steel

HB *Hastelloy B-2
HC *Hastelloy C276 wetted parts
IN *Inconel 600
IN625 *Inconel 625
IN825 *Incoloy 825
KMO *Monel K500
MO *Monel 400 or 450
NI Nickel 200
TI Titanium grade 2
Note: For duplex, super duplex and other materials contact your sales representative.
*Trademark names
2 All general terms and conditions of sale, including limitations of our liability, apply to all products and services sold.
Air Operated Valves

Refer to Valve Actuators section for available models.

Packing Options

Refer to the valve model required, and see valve options in that section.

Optional Connections

In addition to standard tube connections, Parker Autoclave Engineers can supply many valve and fitting
series with such optional end connections as Female or Male NPT, Socket Weld to O.D. tube size, or nominal
pipe size, Female AN (MS 33649), Male AN (MS 33656), Butt Weld and British straight thread. Contact
factory for current information. Metric sizes can be supplied on most Parker Autoclave Engineers valves and
fittings on special order.
Anti-Vibration Adder
For valves or other components supplied with anti-vibration option, add -K to catalog number. See fitting
and tubing sections for anti-vibration information.
Stem and Handle Extenders
Stem Extenders are offered for high or low temperature operation
on most Parker Autoclave Engineers valves. They are also useful for
"ES"
remote actuation, such as behind a barricade. To order any valve with Specify desired
a Stem Extender, add ES and the length (6, 12, 18 or 24) to the extra length
in inches
beginning of the valve catalog number: e.g. ES12-30VM4071. Other
lengths on special order. To order stem extender only, please provide
extender number and the prefix of the valve model. Ex: ES12-20SM6 (handle not included.)
Abrasive or Highly Erosive Service Option
For service conditions where high flows, erosive mediums, or high pressures cause premature wear on
stems and seats, N-Dura coating can be supplied to increase component life.
N-Dura coating is specifically used to enhance stem and seat life by providing a protective coating over a
base substrate. This creates a thin, hard, protective coating with no effects of brittleness. The coating will
not peel, chip or flake off the base material. The coating hardness is in a range of minimum 85 Rc
surpassing other coatings and most materials.
The additional performance characteristics provided with the coating are reduced friction, corrosion resis-
tance exceeding 400 stainless steel, and operating temperature ranges from -300F to 1200F.
The coating has been tested in erosive applications, yielding far better results than Stellite, which has been
utilized extensively in these applications. With few exceptions, most major ferrous and non ferrous materials
can be successfully coated.
Most valves in this catalog are available with N-Dura coated stems or with both N-Dura coated stems and
replaceable seats. This coating is available for all stem options. To order both N-Dura stems on any valve
pattern, add suffix CS to the catalog model number. To order both N-Dura coated stems and N-Dura
coated replaceable seats (available on 2-way angle replaceable seat pattern only) add suffix CSS to the
catalog number. Stellite is available as a special upon request.
Optional Valve Handles
Blue powder coated stainless handles are standard on the majority of the valve series. Stainess handles can
be purchased in different colors if required, contact the factory for color options.

All general terms and conditions of sale, including limitations of our liability, apply to all products and services sold. 3
Exception: Heavy-duty Stainless Steel T-handles assemblies are standard on our larger valves, see
detailed information on each section for handles used.

Panel Mounting
Most Parker Autoclave Engineers valve series can be panel mounted through the locking device screw hole
and a corresponding hole opposite the packing gland. To order a set of two panel mounting screws, add PM
to the catalog order number.

Handle Lockouts: Handle lockouts are available to lockout valves in the open or closed position preventing
unauthorized personnel from actuating valves during shutdowns or emergency situations. Lockouts consist
of two halves that completely cover the valve handle and can be locked for security. They are constructed of
durable plastic resistant to abrasion, solvents, and chemical agents. Consult factory for details.
To order lockouts with valves add -L to part number.
Lockout part numbers: 90088 - 2.5" (63.5) to 5.0" (127.0) handle size
90194 - 6.5" (165.1) to 10.0" (254.0) handle size
Note: Modifications may be required to some valves to use lockouts if purchased separately. See page 1 of
ball valve options for photo of clamp style lockout.

Note: Many standard and special options and accessories for Parker Autoclave Engineers valves are listed
here. Not all options apply to all valve series - see individual ordering pages for specifics. Some options
listed here are special order options with prices quoted on application. See Custom Valves/Manifolds section
for other options.
For prompt service, Parker Autoclave Engineers stocks select products. Consult your local representative.

Offer of Sale
The items described in this document are available for sale by Parker Hannifin Corporation, its subsidiaries or its authorized distributors. Any sale contract entered by Parker will be governed by the provisions
stated in Parker's standard terms and conditions of sale (copy available upon request).

2013 Parker Hannifin Corporation | Autoclave Engineers is a registered trademark of the Parker Hannifin Corporation 02-0120SE January2013

Caution! Do not mix or interchange parts or tubing with those of other

manufacturers. Doing so is unsafe and will void warranty.

Caution! Parker Autoclave Engineers Valves, Fittings and Tools are not
Instrumentation Products Division Parker Hannifin Manufacturing Ltd.
designed to work with common commercial instrument tubing and will
Autoclave Engineers Operation Instrumentation Products Division, Europe only work with tubing built to Parker Autoclave Engineers Specifications
8325 Hessinger Drive Industrial Estate Whitemill AES-222. Failure to do so will void warranty.
Erie, Pennsylvania 16509-4679 USA Wexford, Republic of Ireland
PH: 814-860-5700 FAX: 814-860-5811 PH: 353 53 914 1566
www.autoclave.com FAX: 353 53 914 1582 ISO-9001 Certified
Pneumatic
Valve Actuator
Pressures to 150,000 psi (10342 bar)

The need to control process and vent valves from a remote

location makes air operated valves a vital component to many
processing operations.

All Parker Autoclave Engineers valves are available with

diaphragm or piston type actuators. Six sizes of air actuators
(light, heavy light, medium, heavy duty or extra heavy, single
and double stage) are offered to meet the service require-
ments of Parker Autoclave Engineers Low, Medium and High
Pressure valves. Both air-to-open (normally closed) and air-to-
close (normally open) designs are included in the product line.
Optional air to open and close are available upon request.

For most Parker Autoclave Engineers valve series there is a

choice of two or more actuator designs. This provides the
most efficient and economical pneumatic valve operation for
any combination of process requirements and available air
pressure.

Actuators are available for outdoor service. These opera-

tors provide corrosion resistant components and prevent the
ingress of outside elements.

Limit switch packages for valve position indication are also

available upon request.

Actuator - Pneumatic

www.autoclave.com
Pneumatic Valve Actuators - General information
Pressures to 150,000 psi (10342 bar)

Pneumatic Actuator
Pressures to 150,000 psi (10342 bar)
Manual electric switch or
instrument for remote operation
Six sizes of air operators (light, heavy light, medium, heavy
Solenoid Valve
duty or extra heavy, single and double stage) are offered for
remote on-off operation or automatic operation of Parker
Air-in
Autoclave Engineers low, medium or high pressure valves.
AOV
The actuators are available in air-to-open (normally closed) and Vent
air-to-close (normally open) designs.

Manual 3-way valve for remote

Remote on-off control of diaphragm air

Parker Autoclave Engineers air-operated valves (ATO- Air-

To-Open or ATC-Air-To-Close) can be controlled by a 3-way AOV Air-in
manual low pressure valve or by a low pressure solenoid valve.
These are actuated by either a manual switch or an automatic Vent
control instrument. Parker Autoclave Engineers air-operated,
high pressure valves permit process control from a remotely
located panel without the necessity of piping high pressure
lines to the control panel. Safety is greatly increased and
process hold-up is reduced. Prudent selection of ATO or ATC
valves, together with the air controlling devices, permits the Duty Rating Operator Type Ordering Suffix
design of systems to fail safe in either the closed or open Air-to-open OL
condition in the event of loss of operating air, or electrical Diaphragm
Air-to-close CL
failure, or malfunction. Light
Air-to-open OLP
Where explosion proof conditions are a requirement, pneumat- Piston
Air-to-close CLP
ic actuated valves can be considered. Remote mounting of the
Air-to-open OHLP
solenoid valve removes the potential from the hazardous area. Mini-Light Piston
Air-to-close CHLP

Ordering Procedure Diaphragm

Air-to-open OM

To order a valve with an air operator, select the duty rating Medium
Air-to-close CM

and type of the air operator from the chart below. Add the air Air-to-open O1S
Piston
operator identifying suffix to the catalog number of the Parker Air-to-close C1S
Autoclave Engineers valve. To order a 2-way straight, 30VM vee Air-to-open OH
Diaphragm
stem, 9/16 valve with a medium duty air-to-close air operator, Air-to-close CH
specify: ex: 30VM9071-C1S for a yoke style piston air actu- Heavy
Air-to-open O2S
ated valve or 30VM9071-CM for an integral style diaphragm air Piston
Air-to-close C2S
operated valve.
Extra Heavy Air-to-open HO1S
To order the same valve with an extended high temperature Single Stage
Piston
Air-to-close HC1S
stuffing box, add HT to the ordering number: ex: 30VM9071-
Extra Heavy Air-to-open HO2S
C1SHT or 30VM9071-CMHT. Double Stage
Piston
Air-to-close HC2S
To order a dual air operator manifold valve, specify both Outdoor Service Actuators
operators if different. The same valve with a medium duty ATC
Air-to-open O1SOD
on one stem and a medium duty ATO on the other, specify: Medium Piston
Air-to-close C1SOD
ex: 30VM9075-C1SO1S.
Air-to-open O2SOD
To order a valve with operators for outdoor service add an Heavy Piston
Air-to-close C2SOD
OD suffix to the catalog number.
Extra Heavy Air-to-open HO1SOD
Piston
Single Stage Air-to-close HC1SOD
Note: Ordering air actuated valves models with regulating
stems is not recommend. These are open/close actuators and Extra Heavy
Piston
Air-to-open HO2SOD
Doubl Stage
will not regulate flow. Air-to-close HC2SOD

2
Pneumatic Valve Actuators - Actuator Quick Selector Guide
This table allows the designer to quickly select an appropriate air available air pressure is 60 psi (4.14 bar) and an air-to-open (spring
actuator based on valve style and size, maximum system operating fail closed) valve is required, a 30VM or 60VM valve with a heavy
pressure and maximum available air pressure. For example, if the duty air operator can be used. More specific sizing data is available in
system operating pressure is 25,000 psi (1724 bar) and the the sizing charts on the following pages.

Air-to-Close
Light Medium Heavy Extra Heavy Extra Heavy
Valve Single Stage Two Stage
Tube
Series
Outside System Air System Air System Air System Air System Air
Diameter Pressure Pressure Pressure Pressure Pressure Pressure Pressure Pressure Pressure Pressure
in (mm) psi (bar) psi (bar) psi (bar) psi (bar) psi (bar) psi (bar) psi (bar) psi (bar) psi (bar) psi (bar)

1/8 15,000 100 15,000 30

(3.18) (1034.20) (6.89) (1034.20) (2.07)

1/4 10,000 100 15,000 40

(6.35) (689.46) (6.89) (1034.20) (2.76)
10V 3/8 10,000 100 15,000 40
(9.52) (689.46) (6.89) (1034.20) (2.76)

1/2 10,000 65
(12.70) (689.46) (4.48)

1/4 15,000 65
(6.35) (1034.20) (4.48)

3/8 15,000 90 15,000 50

SW (9.52) (1034.20) (6.21) (1034.20) (3.45)

1/2 8,000 100 10,000 60

(12.70) (551.57) (6.89) (689.46) (4.13)

9/16 8,600 100 10,000 55 10,000 45 10,000 20

(14.27) (592.94) (6.89) (689.45) (3.79) (689.45) (3.10) (689.46) (1.38)

3/4 4,,800 100 10,000 100 10,000 75 10,000 35

10SM (19.05) (330.94) (6.89) (689.46) (6.89) (689.46) (5.17) (689.46) (2.41)

1 2,800 100 6,300 100 8,500 100 10,000 35

(25.40) (193.05) (6.89) (434.36) (6.89) (586.04) (6.89) (689.46) (2.41)

1/4 20,000 95 20,000 50

(6.35) (1378.93) (6.55) (1378.93) (3.45)

3/8 19,000 100 20,000 55

(9.52) (1310.00) (6.89) (1378.93) (3.79)

9/16 10,700 100 20,000 85 20,000 60 20,000 30

20SM
(14.27) (737.73) (6.89) (1378.93) (5.86) (1378.93) (4.13) (1378.93) (2.07)

3/4 6,100 100 13,600 100 19,000 100 20,000 50

(19.05) (420.57) (6.89) (937.67) (6.89) (1310.00) (6.89) (1378.93) (3.45)

1 3,900 100 8,800 100 12,500 100 20,000 75

(25.40) (268.89) (6.89) (606.73) (6.89) (861.83) (6.89) (1378.93) (5.17)

NOTE: For 10P and 15P series pipe valves see sizing data tables.

Maximum pressure rating is based on the lowest rating of any component.

Actual working pressure may be determined by tubing pressure rating, if lower.
All dimensions for reference only and subject to change.
For prompt service, Parker Autoclave Engineers stocks select products. Consult your local representative.

3
Pneumatic Valve Actuators - Actuator Quick Selector Guide
Air-to-Open
Light Medium Heavy Extra Heavy Extra Heavy
Valve Single Stage Two Stage
Tube
Series
Outside System Air System Air System Air System Air System Air
Diameter Pressure Pressure Pressure Pressure Pressure Pressure Pressure Pressure Pressure Pressure
in (mm) psi (bar) psi (bar) psi (bar) psi (bar) psi (bar) psi (bar) psi (bar) psi (bar) psi (bar) psi (bar)

1/8 8,200 60 15,000 45

(3.18) (565.36) (4.14) (1034.20) (3.10)

1/4 5,600 60 15,000 65

(6.35) (386.10) (4.14) (1034.20) (4.48)
10V
3/8 5,600 60 15,000 65
(9.52) (386.10) (4.14) (1034.20) (4.48)

1/2 10,000 95
(12.70) (689.46) (6.55)

1/4 15,000 100

(6.35) (1034.20) (6.89)

3/8 10,000 95 15,000 75

SW (9.52) (689.46) (6.55) (1034.20) (5.17)

1/2 6,000 95 10,000 75

(12.70) (413.68) (6.55) (689.46) (5.17)

9/16 7,900 95 10,000 75 10,000 65 10,000 40

(14.27) (544.68) (6.55) (689.45) (5.17) (689.45) (4.48) (689.46) (2.76)

3/4 10,000 95 10,000 65

10SM (19.05) (689.46)
(6.55)
(689.46)
(4.14)

1 6,500 100 10,000 85

(25.40) (448.15)
(6.89)
(689.46)
(5.81)

1/4 20,000 95 20,000 50

(6.35) (1378.93) (6.55) (1378.93) (3.45)

3/8 18,250 95 18,250 50

(9.52) (1258.27) (6.55) (1258.27) (3.45)

9/16 9,800 95 15,700 75 20,000 85 20,000 55

20SM
(14.27) (675.68) (6.55) (1082.46) (5.17) (1378.93) (5.86) (1378.93) (3.79)

3/4 6,000 75 15,000 100 20,000 80

(19.05) (413.68) (5.17) (1034.20) (6.89) (1378.93) (5.52)

1 4,000 75 10,000 100 20,000 100

(25.40) (275.79) (5.17) (689.46) (6.89) (1378.93) (6.89)

series pipe valves see sizing data tables.

NOTE: For 10P and 15P

Maximum pressure rating is based on the lowest rating of any component.
Actual working pressure may be determined by tubing pressure rating, if lower.
All dimensions for reference only and subject to change.
For prompt service, Parker Autoclave Engineers stocks select products. Consult your local representative.

4
Pneumatic Valve Actuators - Actuator Quick Selector Guide
Air-to-Close Air-to-Open
Light Medium Heavy Extra Heavy Light Medium Heavy Extra Heavy
Valve Two Stage Two Stage
Tube
Series Outside System Air System Air System Air System Air System Air System Air System Air System Air
Diameter Pressure Pressure Pressure Pressure Pressure Pressure Pressure Pressure Pressure Pressure Pressure Pressure Pressure Pressure Pressure Pressure
in (mm) psi (bar) psi (bar) psi (bar) psi (bar) psi (bar) psi (bar) psi (bar) psi (bar) psi (bar) psi (bar) psi (bar) psi (bar) psi (bar) psi (bar) psi (bar) psi (bar)

1 30,000 80 30,000 80
30SC (25.40) (2068.39) (5.52) (2068.39) (5.52)

1/4 30,000 50 30,000 30 30,000 75 30,000 40

(6.35) (2068.39) (3.45) (2068.39) (2.07) (2068.39) (5.17) (2068.39) (2.76)

3/8 30,000 75 30,000 40 30,000 95 30,000 50

30VM (9.52) (2068.39) (5.17) (2068.39) (2.76) (2068.39) (6.55) (2068.39) (3.45)
9/16 30,000 75 30,000 40 30,000 95 30,000 50
(14.27) (2068.39) (5.17) (2068.39) (2.76) (2068.39) (6.55) (2068.39) (3.45)

9/16 40,000 45 40,000 55

40VM (14.27) (2757.86) (3.10) (2757.86) (3.79)

1/4 60,000 75 60,000 40 60,000 95 60,000 50

(6.35) (4136.79) (5.17) (4136.79) (2.76) (4136.79) (6.55) (4136.79) (3.45)
3/8 60,000 75 60,000 40 60,000 95 60,000 50
60VM (9.52) (4136.79) (5.17) (4136.79) (2.76) (4136.79) (6.55) (4136.79) (3.45)

9/16 60,000 90 60,000 45 60,000 95 60,000 50

(14.27) (4136.79) (6.21) (4136.79) (3.10) (4136.79) (6.55) (4136.79) (3.45)

5/16 100,000 100 100,000 50 100,000 70

100VM (7.92) (6894.55) (6.89) (6894.65) (3.45) (6894.65) (4.83)

5/16 150,000 80 150,000 75

150V (7.92) (10341.97) (5.52) (10341.97) (5.17)

MVE/MV Mini Valves Series

Tube Air-to-Close Air-to-Open
Valve Outside
Series Diameter
Mini-Light
in (mm)
Mini-Light

1/16 15,000 75 15,000 100

MVE (1.57) (1034.20) (5.17) (1034.20) (6.89)

MV 1/8 15,000 75 15,000 100

(3.18) (1034.20) (5.17) (1034.20) (6.89)

Maximum pressure rating is based on the lowest rating of any component.

5
Pneumatic Valve Actuators - Piston Style Pneumatic
Pressures to 150,000 psi (10342 bar)

Piston type air-operated valves offer a unique, reliable design

providing for a long and dependable life. These valves are
more compact than diaphragm valves and are appropriate for
applications such as high-flow gas and liquid delivery systems Mini-Light

to reactors and mixer/vaporizers.

Parker Autoclave Engineers piston type actuators feature: Air Operator Materials
Small, compact, piston actuator Cylinder, piston, cover plates, spring housing
Air-to-open or -close with spring return Anodized aluminum (for corrosion and wear resistance).
Yoke design for separation of process and air pressure Yoke
Ease of stem replacement Painted Steel
Stem position indicator is standard Technical Data
Positive shut-off metal-to-metal seating Air Operator
High actuator cycle life Maximum allowable working pressure: 100 psi (6.89 bar)
1/8" NPT air inlet connection except Extra Allowable piston temperature range: -20F to 200F
Heavy duty has 3/8" NPT (-29C to 93C)
Area of piston:
B Light duty - 4.9 sq. in (31.6 sq. cm)
Mini-Light duty - 5.4 sq. in (34.8 sq. cm)
Medium duty - 19.6 sq. in (126.5 sq. cm)
Heavy duty - 39.2 sq. in (252.9 sq. cm)
Extra Heavy duty single stage - 56 sq. in (361.3 sq. cm)
Extra Heavy duty double stage - 112 sq. in (722.6 sq. cm)
Approximate air usage/cycle @ 100 psi (6.89 bar):
Light duty - .003 SCF (.00008 SCM)
Mini-Light duty - .007 SCF (.0002 SCM)
A Medium duty - .04 SCF (.0011 SCM)
Heavy duty - .08 SCF (.0022 SCM)
Extra Heavy duty single stage - .33 SCF (.0095 SCM)
Holes supplied in yoke Extra Heavy duty double stage - .67 SCF (.019 SCM)
bracket for mounting
Tested to 100,000 cycles at 100 psi (6.89 bar) with no
leakage or signs of wear or fatigue.

Duty Ordering Dimensions: inches (mm)

Type
Rating Suffix A B
Air-to-Open(ATO)
Air-to-Open (ATO)
5.50 2.81
Air-to-open OLP (139.70) (71.37)
NOTE: Air inlet for air to open operator is located in the back, Light
opposite the front of valve. For other locations, consult factory. 3.94 2.81
Air-to-close CLP (100.08) (71.37)
B 3.84 3.06
Air-to-open OHLP (97.67) (77.72)
Mini-Light
2.61 3.06
Air-to-close CHLP (66.3) (77.70)
8.25 5.69
Air-to-open O1S
(209.55) (144.52)
Medium
5.50 5.69
Air-to-close C1S (139.70) (144.52)
A 11.88 5.69
Air-to-open O2S (301.75) (144.52)
Heavy
8.50 5.69
Air-to-close C2S (215.90) (144.52)
15.16 9.44
Extra Heavy Air-to-open HO1S (385.06) (239.77)
Single Stage 8.75 9.44
Air-to-close HC1S (217.67) (239.77)
18.50 9.44
Air-to-open HO2S (469.90)
Extra Heavy (239.78)
Air-to-Close (ATC) Two Stage 11.94 9.44
Air-to-Close (ATC) Air-to-close HC2S (303.27) (239.78)
The standard Mini-Light operator does not utilize the yoke design.
A yoke design is available upon request. 6
Pneumatic Valve Actuators - Diaphragm Style Pneumatic
Pressures to 150,000 psi (10342 bar)

Diaphragm type air-operated valves are an efficient and eco-

nomical means for remote on-off control of a wide range of
process requirements. Diaphragm type actuators are designed
to provide a dependable alternative to piston type actuators.

Parker Autoclave Engineers diaphragm type air actuators

feature:
Economical diaphragm design
Air-to-open or -close with spring return Air Operator Materials
Integral connection of valve and operator for height Upper and lower housing, spring housing
resticted applications. Anodized aluminum
Oversized weep holes for separation of process and air Diaphragm plate
operator pressures. Cast ductile iron.
Stem position indicator optional Technical Data
Medium actuator cycle life Air Operator
1/8" NPT air inlet connection Maximum allowable working pressure: 100 psi (6.89 bar)
Allowable diaphragm temperature range: -40F to 200F
(-40C to 93C)
B Area of diaphragm:
Light duty - 4.9 sq. in (31.6 sq. cm)
Medium duty - 19.6 sq. in (126.5 sq. cm)
Heavy duty - 45.66 sq. in (294.58 sq. cm)

Approximate air usage/cycle @ 100 psi (6.89 bar):

Light duty - .007 SCF (.00019 SCM)
A
Medium duty - .07 SCF (.0019 SCM)
Heavy duty - .2 SCF (.0056 SCM)

Note: OH and CH are carbon steel painted

Duty Ordering Dimensions: inches (mm)

Type
Rating Suffix A B
5.00 4.25
Air-to-open OL (127.00) (107.95)
Light
2.38 4.25
Air-to-Open (ATO) Air-to-close CL (60.45) (107.95)

6.42 7.12
Air-to-open OM
(163.01) (180.90)
B Medium
3.75 7.12
Air-to-close CM (95.25) (180.90)

8.75 10.00
A Air-to-open OH (222.25) (254.00)
Heavy
4.69 10.00
Air-to-close CH (119.13) (254.00)

Air-to-Close (ATC)

7
Pneumatic Valve Actuators - Air Operator Sizing Data
Air-to-Close
Series 10V and SW Valves
Valve Maximum Stem Travel Flow
Series Operator Duty System Pressure KSI (Mpa) Pressure
in (mm) Coefficient**
psi (bar)*
1-4 6 8 10 12 14 15
(6.89-27.57) (41.37) (55.16) (68.95) (82.74) (96.53) (103.42)
30 40 55 65 85 95 100 15,000 0.16 0.12
Light Duty
(2.07) (2.76) (3.79) (4.48) (5.86) (6.55) (6.89) (1034.20) (4.06)
10V2
25 25 25 25 25 25 30
Medium Duty (1.72) (1.72) (1.72) (1.72) (1.72) (1.72) (2.07)

40 60 75 95 10,000 0.19 0.20

Light Duty (2.76) (4.13) (5.17) (6.55) (689.46) (4.83)
10V4
30 30 30 30 35 35 40 15,000
Medium Duty (2.07) (2.07) (2.07) (2.07) (2.41) (2.41) (2.76) (1034.20)
40 60 75 100 10,000 0.19 0.20
Light Duty (2.76) (4.13) (5.17) (6.89) (689.46) (4.83)
10V6
30 30 30 35 35 35 40 15,000
Medium Duty Air (2.07) (2.07) (2.07) (2.41) (2.41) (2.41) (2.76) (1034.20)
Pressure
50 50 55 65 10,000 0.31 0.86
10V8 Medium Duty psi (bar) (3.45) (3.45) (3.79) (4.48) (689.46) (7.90)
40 40 40 50 55 60 65 15,000 0.25 0.65
SW4 Medium Duty (2.76) (2.76) (2.76) (3.45) (3.79) (4.13) (4.48) (1034.20) (6.40)
50 50 55 70 75 85 90 15,000 0.25 0.95
Medium Duty (3.45) (3.45) (3.79) (4.83) (5.17) (5.86) (6.21) (1034.20) (6.40)
SW6
20 25 30 35 40 45 50 15,000
Heavy Duty (1.38) (1.72) (2.07) (2.41) (2.76) (3.10) (3.45) (1034.20)

65 70 100 8,000 0.38 1.90

Medium Duty (4.48) (4.83) (6.89) (551.57) (9.70)
SW8
35 35 50 60 10,000
Heavy Duty
(2.41) (2.41) (3.45) (4.13) (698.46)

Series 10SM Valves

Valve Maximum Stem Travel Flow
Operator Duty System Pressure KSI (Mpa) Pressure
Series psi (bar)* in (mm) Coefficient**
1-3 4 6 8 10 12 14 16 18 20
(6.89-20.68) (27.58) (41.37) (55.16) (68.95) (82.74) (96.53) (110.31) (124.10) (137.89)
65 65 75 100 8,600 0.38 1.75
Medium Duty
(4.48) (4.48) (5.17) (6.89) (592.94) (9.65)
35 35 40 50 55 10,000
Heavy Duty (2.41) (2.41) (2.76) (3.45) (3.79) (689.46)
10SM9
Extra 30 30 30 35 45 10,000
Heavy Duty
(2.07) (2.07) (2.07) (2.41) (3.10) (689.46)
Single Stage
Extra 15 15 15 20 20 10,000
Heavy Duty (1.03) (1.03) (1.03) (1.38)
(1.38) (689.46)
Two Stage
90 100 4,800 0.44 2.80
Medium Duty (6.21) (6.89) (330.94) (11.18)
Air
45 45 60 80 100 10,000
Heavy Duty Pressure (3.10) (3.10) (4.13) (5.52) (6.89) (689.46)
psi (bar)
10SM12 Extra 35 35 50 60 70 10,000
Heavy Duty
(2.41) (2.41) (3.45) (4.13) (4.83) (689.46)
Single Stage
Extra 20 20 25 30 35 10,000
Heavy Duty (1.38) (1.38) (1.72) (2.07) (2.41) (689.46)
Two Stage
100 2,800 0.56 5.20
Medium Duty (6.89) (193.05) (14.22)
60 70 100 6,300
Heavy Duty (4.13) (4.83) (6.89) (434.36)
10SM16 Extra 45 50 70 95 8,500
Heavy Duty
(3.10) (3.45) (4.83) (6.55) (586.46)
Single Stage
Extra 25 25 35 45 55 10,000
Heavy Duty (1.72) (1.72) (2.41) (3.10) (3.79) (689.46)
Two Stage
8
Air-to-Close - Series 20SM Valves
Valve Maximum Stem Travel Flow
Series Operator Duty System Pressure KSI (Mpa) Pressure
in (mm) Coefficient**
psi (bar)*
1-3 4 6 8 10 12 14 16 18 20
(6.89-20.68) (27.58) (41.37) (55.16) (68.95) (82.74) (96.53) (110.31) (124.10) (137.89)
40 40 40 40 50 60 70 80 85 95 20,000 0.25 0.31
Medium Duty (2.76) (2.76) (2.76) (2.76) (3.45) (4.13) (4.83) (5.52) (5.86) (6.55) (1378.93) (6.35)
20SM4
15P4 20 20 20 20 25 30 35 40 45 50
Heavy Duty
(1.38) (1.38) (1.38) (1.38) (1.72) (2.07) (2.41) (2.76) (3.10) (3.45)
45 45 45 45 55 65 75 85 95 100 19,000 0.25 0.75
Medium Duty
(3.10) (3.10) (3.10) (3.10) (3.79) (4.48) (5.17) (5.86) (6.55) (6.89) (1309.98) (6.35)
20SM6
15P6 25 25 25 25 30 35 40 45 50 55 20,000
Heavy Duty
(1.72) (1.72) (1.72) (1.72) (2.07) (2.41) (2.76) (3.10) (3.45) (3.79) (1378.93)

60 60 65 80 100 10,700 0.38 1.30

Medium Duty
(4.13) (4.13) (4.48) (5.52) (6.89) (737.73) (9.65)
30 30 30 40 50 55 60 70 80 85 20,000
Heavy Duty (2.07) (2.07) (2.07) (2.76) (3.45) (3.79) (4.13) (4.83) (5.52) (5.86) (1378.93)
20SM9 Extra
15P8 25 25 25 30 35 45 50 55 60 65 20,000
Heavy Duty (1.72) (1.72) (1.72) (2.07) (2.41) (3.10) (3.45) (3.79) (4.13) (4.48) (1378.93)
Single Stage
Extra 15 15 15 15 20 20 25 25 30 30 20,000
Heavy Duty (1.03) (1.03) (1.03) (1.03) (1.38) (1.38) (1.72) (1.72) (2.07) (2.07) (1378.93)
Two Stage Air
Pressure
80 80 100 6,100 0.44 2.50
Medium Duty psi (bar) (5.44) (5.44) (6.80) (420.57) (11.18)
40 40 50 60 75 90 100 13,600
Heavy Duty
(2.72) (2.72) (3.40) (4.08) (5.10) (6.12) (6.80) (937.67)

20SM12 Extra
30 30 40 50 60 65 75 85 95 100 19,000
10P12 Heavy Duty
(2.07) (2.07) (2.76) (3.45) (4.13) (4.48) (5.17) (5.86) (6.55) (6.89) (1310.00)
Single Stage
Extra 15 15 20 25 30 35 40 45 50 50 20,000
Heavy Duty (1.03) (1.03) (1.38) (1.72) (2.07) (2.41) (2.76) (3.10) (3.45) (3.45) (1378.93)
Two Stage
100 100 3,900 0.56 3.40
Medium Duty
(6.89) (6.89) (268.89) (14.22)
50 50 70 100 8,800
Heavy Duty
(3.45) (3.45) (4.83) (6.89) (606.73)

20SM16 Extra
40 40 55 70 85 100 12,500
10P16 Heavy Duty
(2.76) (2.76) (3.79) (4.83) (5.86) (6.89) (861.83)
Single Stage
Extra 20 20 25 35 40 50 55 60 70 75 20,000
Heavy Duty (1.38) (1.38) (1.72) (2.41) (2.76) (3.45) (3.79) (4.48) (4.83) (5.17) (1378.93)
Two Stage

Series 30SC Valves

Valve Maximum Stem Travel Flow
Operator Duty System Pressure KSI (Mpa) Pressure
in (mm) Coefficient**
Series psi (bar)*
1-10 15 16 18 20 22 24 26 28 30
(6.89-68.94) (103.42) (110.31) (124.10) (137.89) (151.68) (165.47) (179.26) (193.05) (206.84)

Extra Air
30 40 45 50 55 60 65 70 75 80 30,000 0.50 2.61
30SC16 Heavy Duty Pressure
(2.07) (2.76) (3.10) (3.45) (3.79) (4.13) (4.48) (4.83) (5.17) (5.52) (2068.39) (12.70)
Two Stage psi (bar)

** Cv data is for 2-way straight valves. CAUTION: While testing has shown O-rings to provide satisfactory service life,
For angle pattern, add approximately 50% to the CV valve. both cyclic and shelf life may vary widely with differing service conditions,
properties of reactants, pressure and temperature cycling and age of the O-ring,
FREQUENT INSPECTIONS SHOULD BE MADE to detect any deterioration, and
O-rings replaced as required.

*Maximum pressure rating is based on the lowest rating of any component.

9
Air-to-Close - Series 30VM Valves
Valve Maximum Stem Travel Flow
Series Operator Duty System Pressure KSI (Mpa) Pressure
in (mm) Coefficient**
psi (bar)*
1-10 12 14 16 18 20 22 24 26 28 30
(6.89-68.94) (82.74) (96.53) (110.31) (124.10) (137.89) (151.68) (165.47) (179.26) (193.05) (206.84)
25 25 25 30 35 35 40 45 50 50 55 30,000 0.19 0.12
Medium Duty (1.72) (1.72) (1.72) (2.07) (2.41) (2.41) (2.76) (3.10) (3.45) (3.45) (3.79) (2068.39) (4.83)
30VM4
15 15 15 15 20 20 20 25 25 25 30
Heavy Duty Air (1.03) (1.03) (1.03) (1.03) (1.38) (1.38) (1.38) (1.72) (1.72) (1.72) (2.07)
Pressure
psi (bar) 30 30 35 40 45 50 55 60 65 70 75 30,000 0.19 0.23
30VM6 Medium Duty
(2.07) (2.07) (2.41) (2.76) (3.10) (3.45) (3.79) (4.13) (4.48) (4.83) (5.17) (2068.39) (4.83) (30VM6)
&
30VM9 15 15 20 20 25 25 30 30 35 35 40 0.33
Heavy Duty
(1.03) (1.03) (1.38) (1.38) (1.72) (1.72) (2.07) (2.07) (2.41) (2.41) (2.76) (30VM9)

Series 40VM Valves

Valve Maximum Stem Travel Flow
Series Operator Duty System Pressure KSI (Mpa) Pressure
in (mm) Coefficient**
psi (bar)*
1-10 15 20 25 30 35 40
(6.89-68.94) (103.42) (137.89) (172.37) (206.84) (241.31) (275.79)
40 50 60 70 80 90 90 40,000 0.25 0.28
Medium Duty Air (2.76) (3.45) (4.13) (4.83) (5.52) (6.21) (6.21) (2757.86) (6.35)
40VM9 Pressure
psi (bar) 20 25 30 35 40 45 45
Heavy Duty
(1.38) (1.70) (2.07) (2.41) (2.76) (3.10) (3.10)

Series 60VM Valves

Valve Maximum Stem Travel Flow
Series Operator Duty System Pressure KSI (Mpa) Pressure
in (mm) Coefficient**
psi (bar)*
1-20 25 30 35 40 45 50 55 60
(6.89-137.89) (172.37) (206.84) (241.31) (275.79) (310.26) (344.73) (379.21) (413.68)

30 30 35 45 50 55 60 70 75 60,000 0.25 0.08

60VM4
Medium Duty (2.07) (2.07) (2.41) (3.10) (3.45) (3.79) (4.13) (4.83) (5.17) (4136.79) (6.35) (60VM4)
&
60VM6 15 15 20 25 25 30 30 35 40 0.09
Heavy Duty Air (1.03) (1.03) (1.38) (1.72) (1.72) (2.07) (2.07) (2.41) (2.76) (60VM6)
Pressure
psi (bar) 35 40 50 55 65 70 75 85 90 60,000 0.25 0.14
Medium Duty
(2.41) (2.76) (3.45) (3.79) (4.48) (4.83) (5.17) (5.86) (6.21) (4136.79) (6.35)
60VM9
20 20 25 30 35 35 40 45 45
Heavy Duty
(1.38) (1.38) (1.72) (2.07) (2.41) (2.41) (2.76) (3.10) (3.10)

Series 100VM & 150V Valves

Valve Maximum Stem Travel Flow
Operator Duty System Pressure KSI (Mpa) Pressure
in (mm) Coefficient**
Series psi (bar)*
1-40 50 60 70 80 90 100 150
(6.89-275.79) (344.73) (413.68) (482.63) (551.57) (620.52) (689.46) (1034.20)
50 55 65 75 85 95 100 100,000 0.12 0.09
Medium Duty (3.45) (3.79) (4.48) (5.17) (5.86) (6.55) (6.89) (6894.65) (3.05)
100VM4
100VM5 Air
100VM6 30 30 35 40 40 45 50
Heavy Duty Pressure (2.07) (2.07) (2.41) (2.76) (2.76) (3.10) (3.45)
psi (bar)
35 40 45 45 50 55 60 100 150,000 0.12 0.06
150V5 Heavy Duty
(2.41) (2.76) (3.10) (3.10) (3.45) (3.79) (4.13) (6.89) (10341.97) (3.05)

10
Pneumatic Valve Actuators - Air Operator Sizing Data
Air-to-Open
Series 10V Valves
Valve Maximum Pressure Flow Coefficient
Series Operator Duty System Pressure KSI (Mpa) psi (bar)* Cv**

1-6 8 10 12 14 15
(6.89-41.37) (110.31) (124.10) (82.74) (96.53) (103.42)

Air Pressure: psi 60 60

(bar) (4.13) (4.13)

Spring Pre-Compression: 0.31 0.38 8,200

0.12
Light Duty
in. (mm) (7.87) (9.65) (565.36) to
0.09***
Stem Travel 0.12 0.06
in (mm) (3.05) (1.52)
10V2
Air Pressure: psi 40 40 40 40 40 45 15,000 0.12
(bar) (2.76) (2.76) (2.76) (2.76) (2.76) (3.10) (1034.20)

Spring Pre-Compression: 0.12 0.12 0.12 0.12 0.12 0.16

Medium Duty
in. (mm) (3.05) (3.05) (3.05) (3.05) (3.05) (4.06)

Stem Travel 0.12 0.12 0.12 0.12 0.12 0.12

in (mm) (3.05) (3.05) (3.05) (3.05) (3.05) (3.05)
Air Pressure: psi 60
(bar) (4.13)
10V4 Spring Pre-Compression: 0.38 5,600 0.02
10V6 Light Duty in. (mm) (9.65) (386.46) to
0.17***
Stem Travel 0.06
in (mm) (1.52)

Air Pressure: psi 45 45 50 55 60 65

(bar) (3.10) (3.10) (3.45) (3.79) (4.14) (4.48)

Spring Pre-Compression: 0.12 0.12 0.14 0.18 0.20 0.22 15,000

0.20
10V4 Medium Duty
in. (mm) (3.05) (3.05) (3.65) (4.75) (5.08) (5.59) (1034.20)

Stem Travel 0.19 0.19 0.19 0.19 0.19 0.19

in (mm) (4.83) (4.83) (4.83) (4.83) (4.83) (4.83)

Air Pressure: psi 45 45 50 55 60 65

(bar) (3.10) (3.10) (3.45) (3.79) (4.13) (4.48)
0.12 0.12 0.14 0.18 0.20 0.22 15,000 0.20
10V6 Medium Duty Spring Pre-Compression:
in. (mm) (3.05) (3.05) (3.56) (4.57) (5.08) (5.57) (1034.20)

Stem Travel 0.19 0.19 0.19 0.19 0.19 0.19

in (mm) (4.83) (4.83) (4.83) (4.83) (4.83) (4.83)

Air Pressure: psi 75 85 95

(bar) (5.17) (5.86) (6.55)

Spring Pre-Compression: 0.25 0.30 0.38 10,000 0.86

Medium Duty
in. (mm) (6.35) (7.62) (9.65) (689.46)

Stem Travel 0.25 0.25 0.25

in (mm) (6.35) (6.35) (6.35)
10V8
Air Pressure: psi 50 55 60
(bar) (3.45) (3.79) (4.13)

Spring Pre-Compression: 0.14 0.20 0.24 10,000 0.86

Heavy Duty
in. (mm) (3.56) (5.08) (6.10) (689.46)

Stem Travel 0.25 0.25 0.25

in (mm) (6.35) (6.35) (6.35)

*Maximum pressure rating is based on the lowest rating of any component.

11
Air-to-Open
Series SW Valves
Valve Maximum Pressure Flow Coefficient
Series Operator Duty System Pressure KSI (Mpa) psi (bar)* Cv**

1-6 8 10 12 14 15
(6.89-41.37) (55.16) (68.95) (82.74) (96.53) (103.41)

Air Pressure: psi 65 65 75 85 95 95

(bar) (4.48) (4.48) (5.17) (5.52) (6.55) (6.55)

Spring Pre-Compression: 0.19 0.19 0.25 0.31 0.36 0.38 15,000 0.65
SW4 Medium Duty in. (mm) (4.83) (4.83) (6.35) (7.87) (9.14) (9.14) (1034.20)

Stem Travel 0.25 0.25 0.25 025 025 025

in (mm) (6.35) (6.35) (6.35) (6.35) (6.35) (6.35)

Air Pressure: psi 75 75 95 95 95 100

(bar) (5.17) (5.17) (6.55) (6.55) (6.55) (6.89)
0.25 0.25 0.28 0.44 0.52 0.56 13,500 0.62
Spring Pre-Compression:
SW6 Medium Duty in. (mm) (6.35) (6.35) (7.11) (11.17) (13.21) (14.22) (930.77) to
0.95
Stem Travel 0.25 0.25 0.25 0.19 0.10 0.06
in (mm) (6.35) (6.35) (6.35) (4.83) (2.54) (1.53)

Air Pressure: psi 50 55 60 65 70 75

(bar) (3.45) (3.79) (4.13) (4.48) (4.83) (5.17)

Spring Pre-Compression: 0.14 0.19 0.24 0.28 0.34 0.36 15,000 0.95
SW6 Heavy Duty in. (mm) (3.56) (4.83) (6.10) (7.11) (8.64) (9.14) (1034.20)

Stem Travel 0.25 0.25 0.25 0.25 0.25 0.25

in (mm) (6.35) (6.35) (6.35) (6.35) (6.35) (6.35)

Air Pressure: psi 95 95

(bar) (6.55) (6.55)
Spring Pre-Compression: 0.38 0.56 7,200 1.75
SW8 Medium Duty in. (mm) (9.65) (14.22) (469.41)

Stem Travel 0.25 0.05

in (mm) (6.35) (1.53)

Air Pressure: psi 65 75 75
(bar) (4.48) (5.17) (5.17)

Spring Pre-Compression: 0.28 0.38 0.44 10,000 1.14

SW8 Heavy Duty in. (mm) (7.11) (9.65) (11.18) (689.46)

Stem Travel 0.25 0.25 0.19

in (mm) (6.35) (6.35) (4.83)

Series MVE/MV Valves

Valve Maximum Pressure Flow Coefficient
Series Operator Duty System Pressure KSI (Mpa) psi (bar)* Cv**
1-6 8 10 12 14 15
(6.89-41.37) (55.15) (68.95) (82.74) (96.53) (103.41)

Air Pressure: psi 60 65 75 85 90 100

MVE1 (bar) (4.13) (4.48) (5.17) (5.86) (6.21) (6.89)
MV1
Spring Pre-Compression: 0.073 0.094 0.125 0.147 0.172 0.188 15,000 MVE1/MV1
Mini-Light in. (mm) (1.85) (2.39) (3.18) (3.73) (4.37) (4.78) (1034.20) (0.05)
MVE2 Duty
Stem Travel 0.094 0.094 0.094 0.094 0.094 0.094 MVE2/MV2
MV2
in (mm) (2.39) (2.39) (2.39) (2.39) (2.39) (2.39) (0.11)

*Maximum pressure rating is based on the lowest rating of any component.

12
Air-to-Open - Series 10SM Valves
Valve Maximum Pressure Flow Coefficient
Series Operator Duty System Pressure KSI (Mpa) psi (bar)* Cv**

1-4 6 8 10 12 14 16 18 20
(6.89-27.58) (41.37) (55.15) (68.95) (82.74) (96.53) (110.31) (124.10) (137.89)

Air Pressure: psi 95 95 95

(bar) (6.55) (6.55) (6.55)

Spring Pre-Compression: 0.38 0.44 0.56 7,900 1.74 to 0.72***

Medium Duty in. (mm) (9.65) (11.18) (14.22) (544.68)

Stem Travel 0.25 0.19 0.06

in (mm) (6.35) (4.83) (1.52)

Air Pressure: psi 55 65 70 75

(bar) (3.79) (4.48) (4.83) (5.17)

Spring Pre-Compression: 0.22 0.28 0.34 0.44 10,000 1.74 to 0.72***

Heavy Duty
in. (mm) (5.59) (7.11) (8.64) (11.18) (689.46)

Stem Travel 0.25 0.25 0.25 0.19

in (mm) (6.35) (6.35) (6.35) (4.83)
10SM9 45 45 55 60
Air Pressure: psi
(bar) (3.10) (3.10) (3.79) (4.13)
Extra
Heavy Duty Spring Pre-Compression: 0.31 0.34 0.47 0.59 10,000 1.75
Single Stage in. (mm) (7.87) (8.64) (11.94) (14.99) (689.46)

Stem Travel 0.38 0.38 0.38 0.38

in (mm) (9.65) (9.65) (9.65) (9.65)

Air Pressure: psi 25 30 35 40

(bar) (1.72) (2.07) (2.41) (2.76)
Extra Spring Pre-Compression: 0.16 0.19 0.25 0.28 10,000 1.75
Heavy Duty in. (mm) (4.06) (4.83) (6.35) (7.11) (689.46)
Two Stage
Stem Travel 0.38 0.38 0.38 0.38
in (mm) (9.65) (9.65) (9.65) (9.65)

Air Pressure: psi 55 65 80 95

(bar) (3.79) (4.48) (5.52) (6.55)
Extra
Heavy Duty Spring Pre-Compression: 0.44 0.63 0.84 1.06 10,000
2.80
Single Stage in. (mm) (11.18) (16.00) (21.34) (26.92) (689.46)
Stem Travel 0.44 0.44 0.44 0.44
in (mm) (11.18) (11.18) (11.18) (11.18)
10SM12
Air Pressure: psi 40 50 55 60
(bar) (2.76) (3.45) (3.79) (4.13)
Extra Spring Pre-Compression: 0.22 0.31 0.44 0.53 10,000 2.80
Heavy Duty in. (mm) (5.59) (7.87) (11.18) (13.46) (689.46)
Two Stage
Stem Travel 0.44 0.44 0.44 0.44
in (mm) (11.18) (11.18) (11.18) (11.18)

Air Pressure: psi 75 100

(bar) (5.17) (6.89)
Extra
Heavy Duty Spring Pre-Compression: 0.69 1.13 6,500 5.20
in. (mm) (17.53) (28.70) (448.15)
Single Stage
Stem Travel 0.50 0.50
in (mm) (12.70) (12.70)
10SM16
Air Pressure: psi 55 65 75 85
(bar) (3.79) (4.48) (5.17) (5.86)
Extra
Spring Pre-Compression: 0.34 0.53 0.69 0.88 10,000 5.20
Heavy Duty
in. (mm) (8.64) (13.46) (17.53) (22.35) (689.46)
Two Stage
Stem Travel 0.50 0.50 0.50 0.50
in (mm) (12.70) (12.70) (12.70) (12.70)

13
Air-to-Open - Series 20SM Valves
Valve Maximum Pressure Flow Coefficient
Operator Duty System Pressure KSI (Mpa) psi (bar)* Cv**
Series
1-4 6 8 10 12 14 16 18 20
(6.89-27.58) (41.37) (55.15) (68.95) (82.74) (96.53) (110.31) (124.10) (137.89)

Air Pressure: psi 65 65 65 75 85 95 95 95 95

Medium Duty (bar) (4.48) (4.48) (4.48) (5.17) (5.86) (6.55) (6.55) (6.55) (6.55)
Spring Pre-Compression: 0.19 0.19 0.19 0.25 0.31 0.38 0.44 0.50 0.56
in. (mm) (4.83) (4.83) (4.83) (6.35) (7.87) (9.65) (11.18) (12.70) (14.22)
20SM4
15P4 Stem Travel 0.25 0.25 0.25 0.25 0.25 0.25 0.19 0.12 0.06 20,000 0.31 to 0.22***
in (mm) (6.35) (6.35) (6.35) (6.35) (6.35) (6.35) (4.83) (3.05) (1.52) (1378.93)
Air Pressure: psi 35 35 35 40 45 50 50 50 50
Heavy Duty (bar) (2.41) (2.41) (2.41) (2.76) (3.10) (3.45) (3.45) (3.45) (3.45)

Air Pressure: psi 65 65 75 85 95 95 95 95

Medium Duty (bar) (4.48) (4.48) (5.17) (5.86) (6.55) (6.55) (6.55) (6.55)
Spring Pre-Compression: 0.19 0.19 0.25 0.31 0.38 0.44 0.50 0.56
in. (mm) (4.83) (4.83) (6.35) (7.87) (9.65) (11.18) (12.70) (14.22)
20SM6
15P6 Stem Travel 0.25 0.25 0.25 0.25 0.25 0.19 0.12 0.06 18,250 0.75 to 0.57***
in (mm) (6.35) (6.35) (6.35) (6.35) (6.35) (4.83) (3.05) (1.52) (1258.27)
Air Pressure: psi 35 35 40 45 50 50 50 50
Heavy Duty (bar) (2.41) (2.41) (2.76) (3.10) (3.45) (3.45) (3.45) (3.45)

Air Pressure: psi 85 90 95 95

(bar) (5.86) (6.21) (6.55) (6.55)
Spring Pre-Compression: 0.31 0.34 0.47 0.56 9,800 1.29 to 0.53***
Medium Duty in. (mm) (7.87) (8.64) (11.94) (14.22) (675.68)
Stem Travel 0.25 0.25 0.15 0.06
in (mm) (6.35) (6.35) (3.81) (1.52)
Air Pressure: psi 50 55 65 70 75 75 75
(bar) (3.45) (3.79) (4.48) (4.83) (5.17) (5.17) (5.17)
Spring Pre-Compression: 0.19 0.22 0.28 0.34 0.44 0.50 0.56 15,700 1.29 to 0.53***
Heavy Duty in. (mm) (4.83) (5.59) (7.11) (8.64) (11.18) (12.70) (14.22) (1082.46)
Stem Travel 0.25 0.25 0.25 0.25 0.19 0.12 0.06
in (mm) (6.35) (6.35) (6.35) (6.35) (4.83) (3.05) (1.52)
20SM9
15P8 Air Pressure: psi 40 40 50 55 60 65 70 75 85
(bar) (2.76) (2.76) (3.45) (3.79) (4.13) (4.48) (4.83) (5.17) (5.86)
Extra
Heavy Duty Spring Pre-Compression: 0.25 0.28 0.38 0.47 0.56 0.66 0.75 0.84 0.94 20,000 1.30
in. (mm) (6.35) (7.11) (9.65) (11.94) (14.22) (16.76) (19.05) (21.34) (23.88) (1378.93)
Single Stage
Stem Travel 0.38 0.38 0.38 0.38 0.38 0.38 0.38 0.38 0.38
in (mm) (9.65) (9.65) (9.65) (9.65) (9.65) (9.65) (9.65) (9.65) (9.65)
Air Pressure: psi 30 35 35 40 40 45 50 50 55
(bar) (2.07) (2.41) (2.41) (2.72) (2.72) (3.10) (3.45) (3.45) (3.79)
Extra
Heavy Duty Spring Pre-Compression: 0.13 0.16 0.19 0.25 0.28 0.34 0.38 0.44 0.47 20,000 1.30
in. (mm) (3.30) (4.06) (4.83) (6.35) (7.11) (8.64) (9.65) (11.18) (11.94) (1378.93)
Two Stage
Stem Travel 0.38 0.38 0.38 0.38 0.38 0.38 0.38 0.38 0.38
in (mm) (9.65) (9.65) (9.65) (9.65) (9.65) (9.65) (9.65) (9.65) (9.65)

Maximum rating is based on the valve rating.

*** Cv varies because of spring compression limitations. The flow

coefficient range is given for the maximum stem travel (lowest system
pressure) to minimum travel (highest system pressure).

14
Air-to-Open - Series 20SM Valves
Valve Maximum Pressure Flow Coefficient
Series Operator Duty System Pressure KSI (Mpa) psi (bar)* Cv**

1-4 6 8 10 12 14 16 18 20
(6.89-27.58) (41.37) (55.15) (68.95) (82.74) (96.53) (110.31) (124.10) (137.89)

Air Pressure: psi 65 75

(bar) (4.48) (5.17)
0.28 0.38 6,000 0.80 to 0.78***
Spring Pre-Compression:
Heavy Duty in. (mm) (7.11) (9.65) (413.68)

Stem Travel 0.25 0.25

in (mm) (6.35) (6.35)
Air Pressure: psi 50 60 70 80 90 100 100
(bar) (3.45) (4.13) (4.83) (5.52) (6.21) (6.89) (6.89)
Extra 0.38 0.50 0.66 0.81 0.97 1.13 1.22 15,000 2.50
20SM12 Spring Pre-Compression:
Heavy Duty in. (mm) (9.65) (12.70) (16.76) (20.57) (24.64) (28.70) (30.99) (1034.19)
10P12 Single Stage
Stem Travel 0.44 0.44 0.44 0.44 0.44 0.44 0.44 0.44 0.44
in (mm) (11.18) (11.18) (11.18) (11.18) (11.18) (11.18) (11.18) (11.18) (11.18)
Air Pressure: psi 40 45 50 55 60 65 70 75 80
(bar) (2.76) (3.10) (3.45) (3.79) (4.13) (4.48) (4.83) (5.17) (5.52)
Extra 20,000 2.50
Spring Pre-Compression: 0.19 0.25 0.31 0.41 0.50 0.56 0.66 0.72 0.81
Heavy Duty in. (mm) (1378.93)
(4.83) (6.35) (7.87) (10.41) (12.70) (14.22) (16.76) (18.29) (20.57)
Two Stage
Stem Travel 0.44 0.44 0.44 0.44 0.44 0.44 0.44 0.44 0.44
in (mm) (11.18) (11.18) (11.18) (11.18) (11.18) (11.18) (11.18) (11.18) (11.18)
Air Pressure: psi 75
(bar) (5.17)
Spring Pre-Compression: 0.38 4,000 2.73 to .15***
Heavy Duty in. (mm) (9.65) (275.79)
Stem Travel 0.25
in (mm) (6.35)
Air Pressure: psi 65 80 95 100
(bar) (4.48) (5.52) (6.55) (6.89)
20SM16 Extra
Spring Pre-Compression: 0.50 0.75 0.97 1.22 10,000 3.40
10P16 Heavy Duty in. (mm) (12.70) (19.05) (24.64) (30.99) (689.46)
Single Stage
Stem Travel 0.50 0.50 0.50 0.50
in (mm) (12.70) (12.70) (12.70) (12.70)
Air Pressure: psi 50 55 65 70 80 85 90 100 100
(bar) (3.45) (3.79) (4.48) (4.83) (5.52) (5.86) (6.21) (6.89) (6.89)
Extra
Spring Pre-Compression: 0.25 0.38 0.50 0.63 0.75 0.84 0.97 1.09 1.22 20,000 3.40
Heavy Duty
in. (mm) (6.35) (9.65) (12.70) (16.00) (19.05) (21.34) (24.64) (27.69) (30.99) (1378.93)
Two Stage
Stem Travel 0.50 0.50 0.50 0.50 0.50 0.50 0.50 0.50 0.50
in (mm) (12.70) (12.70) (12.70) (12.70) (12.70) (12.70) (12.70) (12.70) (12.70)

Maximum rating is based on the valve rating. CAUTION: While testing has shown O-rings to provide satisfactory service life,
both cyclic and shelf life may vary widely with differing service conditions,
** Cv data is for 2-way straight valves. properties of reactants, pressure and temperature cycling and age of the
For angle pattern, add approximately 50% to the Cv valve. O-ring, FREQUENT INSPECTIONS SHOULD BE MADE to detect any deteriora-
tion, and O-rings replaced as required.
*** Cv varies because of spring compression limitations. The flow
*Maximum pressure rating is based on the lowest rating of any component.
coefficient range is given for the maximum stem travel (lowest system Actual working pressure may be determined by tubing pressure rating, if lower.
pressure) to minimum travel (highest system pressure).
All dimensions for reference only and subject to change.
For prompt service, Parker Autoclave Engineers stocks select products. Consult your local representative.

15
Air-to-Open - Series 30SC Valves
Valve Maximum Pressure Flow Coefficient
Series Operator Duty System Pressure KSI (Mpa) psi (bar)* Cv**

1-15 16 18 20 22 24 26 28 30
(6.89-103.42) (110.31) (124.10) (137.89) (151.68) (165.47) (179.26) (193.05) (206.84)

Air Pressure: psi 70 75 75 80 85 95 100 100 100

(bar) (4.83) (5.17) (5.17) (5.52) (5.86) (6.55) (6.89) (6.89) (6.89)
Extra 0.56 0.62 0.68 0.75 0.88 0.94 1.00 1.06 1.38 30,000 2.61
Spring Pre-Compression:
30SC16 Heavy Duty in. (mm) (14.22) (15.75) (17.27) (19.05) (22.35) (23.88) (25.40) (26.92) (35.05) (2068.39)
Two Stage
Stem Travel 0.50 0.50 0.50 0.50 0.50 0.50 0.50 0.50 0.50
in (mm) (12.70) (12.70) (12.70) (12.70) (12.70) (12.70) (12.70) (12.70) (12.70)

Series 30VM Valves

Valve Maximum Pressure Flow Coefficient
Series Operator Duty System Pressure KSI (Mpa) psi (bar)* Cv**
1-10 12 14 16 18 20 22 24 26 28 30
(6.89-68.95) (82.74) (96.53) (110.31) (124.10) (137.89) (151.68) (165.47) (179.26) (193.05) (206.84)

Air Pressure: psi 45 45 55 55 55 55 65 65 65 65 75

Medium Duty (bar) (3.10) (3.10) (3.79) (3.79) (3.79) (3.79) (4.48) (4.48) (4.48) (4.48) (5.17)

Spring Pre-Compression: 0.12 0.12 0.19 0.19 0.19 0.19 0.25 0.25 0.25 0.25 0.31 30,000 0.12
in. (mm) (3.15) (3.05) (4.83) (4.83) (4.83) (4.83) (6.35) (6.35) (6.35) (6.35) (7.87) (2068.39)
30VM4
Stem Travel 0.19 0.19 0.19 0.19 0.19 0.19 0.19 0.19 0.19 0.19 0.19
in (mm) (4.83) (4.83) (4.83) (4.83) (4.83) (4.83) (4.83) (4.83) (4.83) (4.83) (4.83)
Air Pressure: psi 25 25 30 30 30 30 35 35 35 35 40
Heavy Duty (bar) (1.72) (1.72) (2.07) (2.07) (2.07) (2.07) (2.41) (2.41) (2.41) (2.41) (2.76)

Air Pressure: psi 45 55 55 65 65 75 75 75 85 85 95

Medium Duty (bar) (3.10) (3.79) (3.79) (4.48) (4.48) (5.17) (5.17) (5.17) (5.86) (5.86) (6.55)

Spring Pre-Compression: 0.12 0.19 0.19 0.25 0.25 0.31 0.31 0.31 0.38 0.38 0.44 30,000 0.33
30VM6 in. (mm) (3.05) (4.83) (4.83) (6.35) (6.35) (7.87) (7.87) (7.87) (9.65) (9.65) (11.18) (2068.39) (30VM6)
&
30VM9 Stem Travel 0.19 0.19 0.19 0.19 0.19 0.19 0.19 0.19 0.19 0.19 0.19 0.33
in (mm) (4.13) (4.83) (4.83) (4.83) (4.83) (4.83) (4.83) (4.83) (4.83) (4.83) (4.83) (30VM9)

Air Pressure: psi 25 30 30 35 35 40 40 40 45 45 50
Heavy Duty (bar) (1.72) (2.07) (2.07) (2.41) (2.41) (2.76) (2.76) (2.76) (3.10) (3.10) (3.45)

Series 40VM Valves

Valve Maximum Pressure Flow Coefficient
Series Operator Duty System Pressure KSI (Mpa) psi (bar)* Cv**
1-10 15 20 25 30 35 40
(6.89-68.95) (103.42) (137.89) (172.37) (206.84) (241.31) (275.79)

Air Pressure: psi 60 70 75 85 95 100 100

Medium Duty (bar) (4.13) (4.83) (5.17) (5.86) (6.55) (6.89) (6.89)

Spring Pre-Compression: 0.12 0.18 0.25 0.31 0.38 0.43 0.5 40,000 0.28
in (mm) (3.05) (4.57) (6.35) (7.87) (9.65) (10.92) (12.70) (2757.86)
40VM9
Stem Travel 0.25 0.25 0.25 0.25 0.25 0.25 0.25
in (mm) (6.35) (6.35) (6.35) (6.35) (6.35) (6.35) (6.35)
Air Pressure: psi 30 35 40 45 50 50 55
Heavy Duty (bar) (2.07) (2.41) (2.76) (3.10) (3.45) (3.45) (3.79)

16
Air-to-Open - Series 60VM Valves
Valve Maximum Pressure Flow Coefficient
Series Operator Duty System Pressure KSI (Mpa) psi (bar)* Cv**

1-15 20 25 30 35 40 45 50 55 60
(6.89-103.42) (137.89) (172.37) (206.84) (241.31) (275.79) (310.26) (344.73) (379.21) (413.68)

Air Pressure: psi 55 65 65 65 75 75 85 85 85 95

Medium Duty (bar) (3.79) (4.48) (4.48) (4.48) (5.17) (5.17) (5.86) (5.86) (5.86) (6.55)

Spring Pre-Compression: 0.12 0.19 0.19 0.19 0.25 0.25 0.31 0.31 0.31 0.38 60,000 0.08
60VM4 in. (mm) (3.05) (4.83) (4.83) (4.83) (6.35) (6.35) (7.87) (7.87) (7.87) (9.65) (4136.79) (60VM4)
&
60VM6 Stem Travel 0.25 0.25 0.25 0.25 0.25 0.25 0.25 0.25 0.25 0.25
in (mm) (6.35) (6.35) (6.35) (6.35) (6.35) (6.35) (6.35) (6.35) (6.35) (6.35)
Air Pressure: psi 30 35 35 35 40 40 45 45 45 50 0.09
Heavy Duty (bar) (2.07) (2.41) (2.41) (2.41) (2.76) (2.76) (3.10) (3.10) (3.10) (3.45) (60VM6)

Air Pressure: psi 55 65 65 75 75 85 95 95 95 95

Medium Duty (bar) (3.74) (4.42) (4.42) (5.10) (5.10) (5.78) (6.46) (6.46) (6.46) (6.46)

Spring Pre-Compression: 0.12 0.19 0.19 0.25 0.25 0.31 0.38 0.38 0.44 0.50 60,000 0.14
in. (mm) (3.05) (4.83) (4.83) (6.35) (6.35) (7.87) (9.65) (9.65) (11.18) (12.70) (4136.79)
60VM9
Stem Travel 0.25 0.25 0.25 0.25 0.25 0.25 0.25 0.25 0.19 0.12
in (mm) (6.35) (6.35) (6.35) (6.35) (6.35) (6.35) (6.35) (6.35) (4.83) (3.05)
Air Pressure: psi 30 35 35 40 40 45 50 50 50 50
Heavy Duty (bar) (2.07) (2.41) (2.41) (2.76) (2.76) (3.10) (3.45) (3.45) (3.45) (3.45)

Series 100VM and 150V Valves

Valve Maximum Pressure Flow Coefficient
Series Operator Duty System Pressure KSI (Mpa) psi (bar)* Cv**
1-20 40 60 80 90 100 125 150
(6.89-137.89) (275.79) (13.68) (551.57) (620.52) (689.46) (861.83) (1034.20)

Air Pressure: psi 35 40 50 60 70 70

(bar) (2.41) (2.76) (3.45) (4.14) (4.83) (4.83)
100VM4 Heavy Spring Pre-Compression: 0.12 0.19 0.25 0.31 0.38 0.38 100,000 0.09
100VM5 Duty in. (mm) (3.05) (4.83) (6.35) (7.87) (9.65) (9.65) (6894.65) to
100VM6 0.07***
Stem Travel 0.12 0.12 0.12 0.12 0.12 0.12
in (mm) (3.05) (3.05) (3.05) (3.05) (3.05) (3.05)
Air Pressure: psi 30 40 45 55 60 60 70 75
(bar) (2.07) (2.76) (3.10) (3.79) (4.13) (4.13) (4.83) (5.17)
Heavy Spring Pre-Compression: 0.12 0.19 0.25 0.31 0.38 0.38 0.44 0.56 150,000
0.06
150V5
Duty in. (mm) (3.05) (4.83) (6.35) (7.87) (9.65) (9.65) (11.18) (14.22) (10341.97)

Stem Travel 0.12 0.12 0.12 0.12 0.12 0.12 0.12 0.06
in (mm) (3.05) (3.05) (3.05) (3.05) (3.05) (3.05) (3.05) (1.52)

** Cv data is for 2-way straight valves. CAUTION: While testing has shown O-rings to provide satisfactory service life,
For angle pattern, add approximately 50% to the Cv valve. both cyclic and shelf life may vary widely with differing service conditions,
properties of reactants, pressure and temperature cycling and age of the O-ring,
*** Cv varies because of spring compression limitations. The flow FREQUENT INSPECTIONS SHOULD BE MADE to detect any deterioration, and
coefficient range is given for the maximum stem travel (lowest system O-rings replaced as required.
pressure) to minimum travel (highest system pressure).
*Maximum pressure rating is based on the lowest rating of any component.
Actual working pressure may be determined by tubing pressure rating, if lower.
All dimensions for reference only and subject to change.
For prompt service, Parker Autoclave Engineers stocks select products. Consult your local representative.

17
WARNING
FAILURE, IMPROPER SELECTION OR IMPROPER USE OF THE PRODUCTS AND/OR SYSTEMS DESCRIBED HEREIN OR RELATED ITEMS CAN CAUSE DEATH, PERSONAL INJURY AND PROPERTY DAMAGE.
This document and other information from Parker Hannifin Corporation, its subsidiaries and authorized distributors provide product and/or system options for further investigation by users having technical
expertise. It is important that you analyze all aspects of your application and review the information concerning the product or system in the current product catalog. Due to the variety of operating conditions
and applications for these products or systems, the user, through its own analysis and testing, is solely responsible for making the final selection of the products and systems and assuring that all performance,
safety and warning requirements of the application are met. The products described herein, including without limitation, product features, specifications, designs, availability and pricing, are subject to change by
Parker Hannifin Corporation and its subsidiaries at any time without notice.

Offer of Sale
The items described in this document are available for sale by Parker Hannifin Corporation, its subsidiaries or its authorized distributors. Any sale contract entered by Parker will be governed by the provisions
stated in Parker's standard terms and conditions of sale (copy available upon request).

2013 Parker Hannifin Corporation | Autoclave Engineers is a registered trademark of the Parker Hannifin Corporation 02-0121SE January2013

Caution! Do not mix or interchange parts or tubing with those of

other manufacturers. Doing so is unsafe and will void warranty.

The need to remotely control process flow at high

pressure makes this valve a vital component to pro-
cessing operations. Parker Autoclave Engineers now
has a flow control valve available in several models.
Parker Autoclave Engineers' control valve utilizes our
standard Micro-metering valve coupled to an electric
actuator. The combination of these two precision,
high quality components, provide a superior low flow
control valve for use with liquids and gases.

Electric Flow Control Valve Features:

Sizes 1/8", 1/4" and 3/8"

Cv: 0.004
Precise, accurate control
Temperatures: -100F to +600F
End connections: low pressure and high
pressure Autoclave
Materials: 316 SS, special materials available
Controller Enclosure Rating: IP65 Weatherproof

Electric Flow Control Valve

www.autoclave.com
Flow Control Valvs - Electric
Pressures to 60,000 psi (4137 bar)

Tube Pressure
Outside Rating
Diameter Orifice psi (bar)
Size Connection Size Rated @ Room
Inches Type Inches (mm) Cv Temperature**

10VRMM 1/8 W125 0.062 (1.57) 0.004 15,000 (1034)

30VRMM 1/4 F250C 0.062 (1.57) 0.004 30,000 (2069)
60VRMM 1/4 F250C 0.062 (1.57) 0.004 60,000 (4137)
60VRMM 3/8 F375C 0.062 (1.57) 0.004 60,000 (4137)

.
Note:

** For complete temperature ratings see pressure/temperature rating guide in

Technical Information section

Controller Specifications Flow Coefficient (Cv)

The microprocessor controlled motor guarantees optimum voltage, 0.175
(4.45)
current and torque control when starting, running or stopping valve
0.150
rotation. The microprocessor also assures accurate stem location and (3.81)
Stem Travel: Inches (mm)

repeatability. 0.125
(3.18)
Power Requirement: 24VDC/50 Watts Min. 0.100
Control Input: 4-20 mA or 0-10 VDC (2.54)
Operating Temperature: -22F (-30C) to 185F (85C) 0.075
(1.90)
2 foot lead cable
0.050
Anodized Aluminum Housing, IP65 (NEMA 4X) Weatherproof (1.27)
0.025
(.64)
0
0.001 0.002 0.003 0.004
Cv

Note: 1 turn is equal to 0.025" (0.64mm)

Ordering Information
Note: For micrometering valve details see
Model Control No. Controller Fig. needle valve section.
Input Rotations RPMs
10VRMM2812-C4 4 - 20 mA 6 10 1
10VRMM2812-C10 0 - 10 VDC 6 10 1
30VRMM4812-C4 4 - 20 mA 6 10 2
30VRMM4812-C10 0 - 10 VDC 6 10 2
60VRMM4812-C4 4 - 20 mA 6 10 2
60VRMM4812-C10 0 - 10 VDC 6 10 2
60VRMM6812-C4 4 - 20 mA 6 10 2
60VRMM6812-C10 0 - 10 VDC 6 10 2

2 All general terms and conditions of sale, including limitations of our liability, apply to all products and services sold.
Valve Options Valve Maintenance
Extreme Temperatures Repair Kits: add R to the front of valve catalog
Standard Parker Autoclave Engineers valves with PTFE packing may be number for proper repair kit.
operated to 450F (232C). Optional packing or trim material available (Example: R60VRMM4882-C)
by adding the following suffixes to catalog order number.= Valve Bodies: Valve bodies are available. Order using the eight (8)
TG - standard valve with PTFE glass packing to 600F (316C). digit part number found on the valve drawing or
B - standard valve with cryogenic trim material and PTFE packing to -100F (-73C). contact your Sales Representative for information.
=
Parker Autoclave Engineers does not recommend compression sleeve connec-
Consult your Parker Autoclave Engineers representative for pricing on repair
tions below 0F (-17.8C) or above 650F (343C). For additional valve options,
kits and valve bodies. Refer to the Tools, Installation, Operation and Mainte-
contact your Sales Representative. nance section for proper maintenance procedures.
See Needle Valve options for stem and seat coatings for erosive service.
Metering valve not to be used as a shutoff valve.

Outside Dimensions - inches (mm) Block

Catalog Diameter Orifice Thick- Valve
Number Tube Diameter A B C D E F G J K ness Pattern

10VRMM2812-C4 1/8 0.062 1.50 0.88 0.31 0.94 1.56 4.50 2.50 4.75 3.50 0.75 See
K Electronic Valve K
10VRMM2812-C10 (3.17) (1.57) (38.10) (22.35)Actuator
(7.87) (23.87) (39.62) (114.30) (63.50) (120.65) (88.90) (19.05) Figure 1

K Electronic Valve K
30VRMM4812-C4
Electronic Valve 1/4 0.062 2.00 1.00 *0.50 1.12 2.00 3.50 3.50 4.75 3.50 1.00 Actuator
Actuator
30VRMM4812-C10 (6.35) (1.57) (50.80) (25.40) (12.70) (28.44) (50.80) (88.90) (88.90) (120.65) (88.90) (25.40)
60VRMM4812-C4 1/4 0.062 J 2.00 1.00 0.50 1.31 2.63 Electronic
3.50 Valve 3.50 8.30 4.10 1.00 See
60VRMM4812-C10 (6.35) (1.57) (50.80) (25.40) (12.70) (33.27) (66.80) Actuator
(88.90) (88.90) (210.80) (104.14) (25.40) Figure 2
60VRMM6812-C4 3/8 0.062 2.00 1.00 0.53 1.31 2.63 3.50 J 3.50 8.30 4.10 J 1.00
60VRMM6812-C10 (9.53) (1.57) (50.80) (25.40) (13.46) (33.27) (66.80) (88.90) (88.90) (210.80) (104.14) (25.40)
View A J J
*Distance gland extends
Coupling

View A J

F
Mounting Bracket Coupling
Coupling 30VRMM/60VRMM
K F Electronic Valve KF
Mounting Rods Actuator
Mounting Bracket Coupling

C D
E 10VRMM
Support Plate
60VRMM F
Mounting Rods
Electronic Valve 0.250
Actuator K (6.35) D Electronic Valve K
C Actuator D
E Support Plate
E
J
B C 0.250
A (6.35) D
Electronic Valve 30VRMM E
Actuator J
B C
A
B J
A J
View A

Coupling J B
A

F J
View A
Mounting Bracket Coupling

0.50
Coupling
(12.70) 0.50
(12.70) F
Mounting Rods
+ + 3.50F
(88.90) 0.50
0.75 D
(19.05)
Mounting Bracket
C E Support PlateCoupling
(12.70) 0.50
(12.70)
+ +
+ + 0.250 3.50
0.20 TYP
F (88.90)
2.90 Mounting Rods
0.75 (6.35) D
(5.16) (73.66) (19.05)
1.50 + +E
(38.1) D
C E Support Plate
B 0.20 TYP C
2.50 2.90
(63.50) A (5.16) (73.66)
0.34 TYP 1.50
(8.74) 0.250
(38.1) (6.35) D
2.50
E
(63.50) 0.34 TYP
B B C (8.74)
A A

Mounting Dimensions Mounting Dimensions

Figure 1 Figure 2
View A
B
A

All general terms and conditions of sale, including limitations of our liability, apply to all products and services sold. 3
0.50
(12.70) 0.50
(12.70)

3.50
WARNING
FAILURE, IMPROPER SELECTION OR IMPROPER USE OF THE PRODUCTS AND/OR SYSTEMS DESCRIBED HEREIN OR RELATED ITEMS CAN CAUSE DEATH, PERSONAL INJURY AND PROPERTY DAMAGE.
This document and other information from Parker Hannifin Corporation, its subsidiaries and authorized distributors provide product and/or system options for further investigation by users having technical
expertise. It is important that you analyze all aspects of your application and review the information concerning the product or system in the current product catalog. Due to the variety of operating conditions
and applications for these products or systems, the user, through its own analysis and testing, is solely responsible for making the final selection of the products and systems and assuring that all performance,
safety and warning requirements of the application are met. The products described herein, including without limitation, product features, specifications, designs, availability and pricing, are subject to change by
Parker Hannifin Corporation and its subsidiaries at any time without notice.

Offer of Sale
The items described in this document are available for sale by Parker Hannifin Corporation, its subsidiaries or its authorized distributors. Any sale contract entered by Parker will be governed by the provisions
stated in Parker's standard terms and conditions of sale (copy available upon request).

2013 Parker Hannifin Corporation | Autoclave Engineers is a registered trademark of the Parker Hannifin Corporation 02-9228BE January2013

Caution! Do not mix or interchange parts or tubing with those of

other manufacturers. Doing so is unsafe and will void warranty.

Since 1945 Parker Autoclave Engineers has designed

and built premium quality valves, fittings and tubing.
This commitment to engineering and manufacturing
excellence has earned Parker Autoclave Engineers a
reputation for reliable, efficient product performance.
Parker Autoclave Engineers has long been established as
the world leader in high pressure fluid handling compo-
nents for the chemical/petrochemical, research, and oil
and gas industries.

Low Pressure Fittings and Tubing Features:

Single-ferrule compression sleeve.

Fast easy make-up of connection.
Available sizes are 1/16, 1/8, 1/4, 3/8, & 1/2.
Fittings manufactured from cold worked 316 stainless steel.
Tubing is manufactured from dual rated 316/316L and 304/304L annealed stainless steel.

Fittings and Tubing - Low Pressure

All items available in special materials.
Operating temperatures from -100F (-73C) to 650F (343C).
Molybdenum disulfide-coated gland nuts to prevent galling.

The Low Pressure Series uses Parker Autoclave Engineers' SpeedBite connection. This single-
ferrule compression sleeve connection delivers fast, easy make-up and reliable bubble-tight
performance, in liquid or gas service.

www.autoclave.com
Fittings and Tubing - Low Pressure Fittings
Pressures to 15,000 psi (1034 bar)
Parker Autoclave Engineers Low Pressure Fittings
are designed for use with low pressure valves and
tubing. These fittings feature improved SpeedBite
compression connections with larger orifices for
excellent flow capabilities. Parker Autoclave Engi-
neers fittings and components are manufactured of
cold-worked type 316 stainless steel. Optional
materials are available upon request.

Connection Components
All valves and fittings are supplied complete with appropriate glands and compression sleeves. To order these components sepa-
rately, use order numbers listed. When using plug, sleeve is not required.
Gland Sleeve Plug
SMN ( ) SSL ( ) SP ( )

Add tube size ( ) When ordering glands separately for 10V Series 1/4 and 3/8 valves, substitute
1/8 - 20 10N for SMN.
1/4 - 40
3/8 - 60 1/16 tubing system components are available in the mini-fitting series. 1/16 tubing
1/2 - 80 components can be used in 10V Series valves and fittings if required. Consult factory
for information on 1/16 tubing assembly in 1/8 tubing components.
Example: 1/4 Gland - SMN 40
Note: Special material glands may be supplied with four To ensure proper fit use Parker Autoclave Engineers tubing. For mounting hole op-
flats in place of standard hex. tion add suffix PM to catalog number. Consult factory for mounting hole dimensions.

Outside Pressure Dimensions - inches (mm)

Catalog Connection Minimum Block Fitting
Diameter Rating Opening A B C D E F G Thickness
Number Type Pattern
Tube psi (bar)* Typical Thickness

Elbow
SL2200 W125 1/8 15,000 0.094 1.00 1.50 0.31 0.38 0.75 0.75 0.62
(3.18) (1034.19) (2.39) (25.40) (38.10) (7.87) (9.53) (19.05) (19.05) (15.75)
SL4400 SW250 1/4 15,000 0.188 1.38 2.00 0.44 0.63 1.00 1.00 0.75
(6.35) (1034.19) (4.78) (35.05) (50.80) (11.18) (15.88) (25.40) (25.40) (19.05) See
SL6600 SW375 3/8 15,000 0.250 1.38 2.00 0.53 0.75 1.00 1.00 0.75 Figure 1
(9.53) (1034.19) (6.35) (35.05) (50.80) (13.46) (19.05) (25.40) (25.40) (19.05)
SL8800 SW500 1/2 10,000 0.375 1.75 2.50 0.53 0.93 1.25 1.25 1.00
(12.70) (689.46) (9.53) (44.45) (63.50) (13.46) (23.62) (31.75) (31.75) (25.40)

*Maximum pressure rating is based on the lowest rating of any

component. Figure 1
Actual working pressure may be determined by tubing pressure rating,
if lower. D HEX
All dimensions for reference only and subject to change. F
For prompt service, Parker Autoclave Engineers stocks select prod-
C
ucts. Consult your local representative.

E
A

Elbow

2 All general terms and conditions of sale, including limitations of our liability, apply to all products and services sold.
Outside Pressure Dimensions - inches (mm)
Catalog Connection Minimum Block Fitting
Diameter Rating Opening A B C D E F G Thickness
Number Type Pattern
Tube psi (bar)* Typical Thickness

Tee
ST2220 W125 1/8 15,000 0.094 1.00 1.50 0.31 0.38 0.75 0.75 0.62
(3.18) (1034.19) (2.39) (25.40) (38.10) (7.87) (9.53) (19.05) (19.05) (15.75)
ST4440 SW250 1/4 15,000 0.188 1.38 2.00 0.44 0.63 1.00 1.00 0.75
(6.35) (1034.19) (4.78) (35.05) (50.80) (11.18) (15.88) (25.40) (25.40) (19.05)
See
ST6660 SW375 3/8 15,000 0.250 1.38 2.00 0.53 0.75 1.00 1.00 0.75 Figure 2
(9.53) (1034.19) (6.35) (35.05) (50.80) (13.46) (19.05) (25.40) (25.40) (19.05)
ST8880 SW500 1/2 10,000 0.375 1.75 2.50 0.53 0.93 1.25 1.25 1.00
(12.70) (689.46) (9.53) (44.45) (63.50) (13.46) (23.62) (31.75) (31.75) (25.40)
Cross
SX2222 W125 1/8 15,000 0.094 1.50 1.50 0.31 0.38 0.75 0.75 0.62
(3.18) (1034.19) (2.39) (38.10) (38.10) (7.87) (9.53) (19.05) (19.05) (15.75)
SX4444 SW250 1/4 15,000 0.188 2.00 2.00 0.44 0.63 1.00 1.00 0.75
(6.35) (1034.19) (4.78) (50.80) (50.80) (11.18) (15.88) (25.40) (25.40) (19.05) See
SX6666 SW375 3/8 15,000 0.250 2.00 2.00 0.53 0.75 1.00 1.00 0.75 Figure 3
(9.53) (1034.19) (6.35) (50.80) (50.80) (13.46) (19.05) (25.40) (25.40) (19.05)
SX8888 SW500 1/2 10,000 0.375 2.50 2.50 0.53 0.93 1.25 1.25 1.00
(12.70) (689.46) (9.53) (63.50) (63.50) (13.46) (23.62) (31.75) (31.75) (25.40)

Straight Coupling
15F2211 W125 1/8 15,000 0.094 0.50 1.25 0.31 0.38
(3.18) (1034.19) (2.39) (12.70) (31.75) (7.87) (9.53)
6F4422 SW250 1/4 15,000 0.188 0.62 1.62 0.44 0.63
(6.35) (1034.19) (4.78) (15.75) (41.15) (11.18) (15.88) See
6F6622 SW375 3/8 15,000 0.250 0.75 1.75 0.53 0.75 Figure 4
(9.53) (1034.19) (6.35) (19.05) (44.45) (13.46) (19.05)
4F8822 SW500 1/2 10,000 0.375 1.00 2.00 0.53 0.93
(12.70) (689.46) (9.53) (25.40) (50.80) (13.46) (23.62)

Bulkhead Coupling
15BF2211 W125 1/8 15,000 0.094 0.690 1.75 0.31 0.38 0.38 0.75 0.38
(3.18) (1034.19) (2.39) (17.53) (44.45) (7.87) (9.53) (9.53) (19.05) (9.53)
6BF4422 SW250 1/4 15,000 0.188 0.940 1.88 0.44 0.63 0.50 1.00 0.38
(6.35) (1034.19) (4.78) (23.88) (47.75) (11.18) (15.88) (12.70) (25.40) (9.53) See
6BF6622 SW375 3/8 15,000 0.250 0.940 1.88 0.53 0.75 0.50 1.00 0.38 Figure 5
(9.53) (1034.19) (6.35) (23.88) (47.75) (13.46) (19.05) (12.70) (25.40) (9.53)
4BF8822 SW500 1/2 10,000 0.375 1.120 2.38 0.53 0.93 0.78 1.38 0.38
(12.70) (689.46) (9.53) (28.45) (60.45) (13.46) (23.62) (19.81) (35.05) (9.53)

Figure 2 Figure 3 *Maximum pressure rating is based on the lowest rating of any component.
Actual working pressure may be determined by tubing pressure rating, if
F lower.
D HEX
F C All dimensions for reference only and subject to change.
For prompt service, Parker Autoclave Engineers stocks select products.
C Consult your local representative.
E
D
E HEX
A A

B
B

Tee Cross

Figure 4 Figure 5

A HEX G MAX

D F D
A
HEX HEX HEX

C E
B
B C

(A=Panel hole drill size)

Straight Coupling Bulkhead Coupling

All general terms and conditions of sale, including limitations of our liability, apply to all products and services sold. 3
Fittings and Tubing - Mini Series Fittings
Pressure to 15,000 psi (1034 bar)

All Parker Autoclave Engineers valves and fittings are supplied complete with appropriate glands and compression
sleeves. To order these components separately, use order numbers listed. When using plug, sleeve is not required.

Gland Add gland size ( ) Example: SMN - 10 Note: Gland sizes differ as folllows:
SMN ( ) 1/16 - 10 Standard is 3/8 hex
1/16 - 10-10mm 10 mm is 10 millimeter hex
1/8 - 20
1/8 - 20-10mm

Sleeve
SSL ( ) Add tube size for sleeve and plug ( ) Example: 1/8 Sleeve SSL20
1/16 - 10
1/8 - 20

Plug
SP ( )

Note: Special material glands may be supplied with four flats in place of standard hex.

Outside Pressure Dimensions - inches (mm)

Catalog Connection Minimum Block Fitting
Diameter Rating Opening A B C D E F Thickness
Number Type Pattern
Tube psi (bar)* Typical

Elbow 3/8 inch hex glands (D Dimension)

MLE1100 W062 1/16 15,000 0.055 1.00 1.00 0.31 0.38 0.69 0.69 0.56
(1.59) (1034.20) (1.40) (25.40) (25.40) (7.87) (9.53) (17.45) (17.45) (14.27)
MLE2200 W125 1/8 15,000 0.093 1.00 1.00 0.31 0.38 0.69 0.69 0.56
(3.18) (1034.20) (2.36) (25.40) (25.40) (7.87) (9.53) (17.45) (17.45) (14.27)
See
10 millimeter hex glands (D Dimension)
Figure 1
ML1100 W062 1/16 15,000 0.055 1.00 1.00 0.31 0.39 0.69 0.69 0.56
(1.59) (1034.20) (1.40) (25.40) (25.40) (7.87) (10.00) (17.45) (17.45) (14.27)
ML2200 W125 1/8 15,000 0.093 1.00 1.00 0.31 0.39 0.69 0.69 0.56
(3.18) (1034.20) (2.36) (25.40) (25.40) (7.87) (10.00) (17.45) (17.45) (14.27)

*Maximum pressure rating is based on the lowest rating of any

component.
Actual working pressure may be determined by tubing pressure rating,
if lower. Figure 1
All dimensions for reference only and subject to change.
For prompt service, Parker Autoclave Engineers stocks select
products. Consult your local representative.
D HEX
F
C

E
A

Elbow

4 All general terms and conditions of sale, including limitations of our liability, apply to all products and services sold.
Outside Pressure Dimensions - inches (mm)
Catalog Connection Minimum Block Fitting
Diameter Rating Opening A B C D E F Thickness
Number Type Pattern
Tube psi (bar)* Typical

Tee 3/8 inch hex glands (D Dimension)

MTE1110 W062 1/16 15,000 0.055 1.00 1.38 0.31 0.38 0.69 0.69 0.56
(1.59) (1034.20) (1.40) (25.40) (34.93) (7.87) (9.53) (17.45) (17.45) (14.27)
MTE2220 W125 1/8 15,000 0.093 1.00 1.38 0.31 0.38 0.69 0.69 0.56
(3.18) (1034.20) (2.36) (25.40) (34.93) (7.87) (9.53) (17.45) (17.45) (14.27)
See
10 millimeter hex glands (D Dimension) Figure 2
MT1110 W062 1/16 15,000 0.055 1.00 1.38 0.31 0.39 0.69 0.69 0.56
(1.59) (1034.20) (1.40) (25.40) (34.93) (7.87) (10.00) (17.45) (17.45) (14.27)
MT2220 W125 1/8 15,000 0.093 1.00 1.38 0.31 0.39 0.69 0.69 0.56
(3.18) (1034.20) (2.36) (25.40) (34.93) (7.87) (10.00) (17.45) (17.45) (14.27)

Cross 3/8 inch hex glands (D Dimension)

MXE1111 W062 1/16 15,000 0.055 1.38 1.38 0.31 0.38 0.69 0.69 0.56
(1.59) (1034.20) (1.40) (34.93) (34.93) (7.87) (9.53) (17.45) (17.45) (14.27)
MXE2222 W125 1/8 15,000 0.093 1.38 1.38 0.31 0.38 0.69 0.69 0.56
(3.18) (1034.20) (2.36) (34.93) (34.93) (7.87) (9.53) (17.45) (17.45) (14.27)
See
10 millimeter hex glands (D Dimension)
Figure 3
MX1111 W062 1/16 15,000 0.055 1.38 1.38 0.31 0.39 0.69 0.69 0.56
(1.59) (1034.20) (1.40) (34.93) (34.93) (7.87) (10.00) (17.45) (17.45) (14.27)
MX2222 W125 1/8 15,000 0.093 1.38 1.38 0.31 0.39 0.69 0.69 0.56
(3.18) (1034.20) (2.36) (34.93) (34.93) (7.87) (10.00) (17.45) (17.45) (14.27)

Straight Couplings 3/8 inch hex glands (D Dimension)

MCE1100 W062 1/16 15,000 0.055 0.50 1.25 0.31 0.38

(1.59) (1034.20) (1.40) (12.70) (31.75) (7.87) (9.53)
MCE2200 W125 1/8 15,000 0.093 0.50 1.25 0.31 0.38
(3.18) (1034.20) (2.36) (12.70) (31.75) (7.87) (9.53)
See
10 millimeter hex glands (D Dimension)
Figure 4
MC1100 W062 1/16 15,000 0.055 0.50 1.25 0.31 0.39
(1.59) (1034.20) (1.40) (12.70) (31.75) (7.87) (10.00)
MC2200 W125 1/8 15,000 0.093 0.50 1.25 0.31 0.39
(3.18) (1034.20) (2.36) (12.70) (31.75) (7.87) (10.00)

*Maximum pressure rating is based on the lowest rating of any component.

Actual working pressure may be determined by tubing pressure rating, if
lower.
All dimensions for reference only and subject to change.
For prompt service, Parker Autoclave Engineers stocks select products.
Consult your local representative.

Figure 2 Figure 3 Figure 4

D HEX F
F C A HEX
C
E
D D
E HEX HEX
A A C
B
B
B

Tee Cross Straight Coupling

All general terms and conditions of sale, including limitations of our liability, apply to all products and services sold. 5
Fittings and Tubing - Low Pressure Tubing
Pressures to 15,000 psi (1034 bar)

Parker Autoclave Engineers offers a complete selection of annealed, seamless stain-

less steel tubing designed to match the performance standards of Parker Autoclave
low pressure valves and fittings. Parker Autoclave Engineers low pressure tubing is
furnished in random lengths between 20 feet (6 meters) and 26.5 feet (8.0 meters).
The average is 24 feet (7.3 meters). The tubing is available in five sizes and a variety of materials. In order to ensure proper sleeve
bite into tubing, Parker Autoclave Engineers specifies and controls the strength levels of both the tube and sleeve materials.
Inspection and Testing
Parker Autoclave Engineers low pressure tubing is inspected for compliance with specified defect restrictions as well as
carburization or intergranular carbide precipitation. The tubing outside diameter and wall thickness is controlled within close
tolerance to assure proper fit. Sample pieces of tube (for each lot) are tested to confirm mechanical properties for proper
compression sleeve bite and pressure capability. Furthermore, the sample tubes are pressure tested as a final check.

Special Materials Tubing Tolerance

In addition to the type 316/316L and 304/304L stainless Nominal Tubing Size Tolerance/Outside Diameter
steel tubing listed in this section, Parker Autoclave Engineers inches (mm) inches (mm)
has a limited stock of hard-to-obtain shorter lengths of the 1/16 (1.59) .064/.062 (1.62/1.57)
following 1/8 (3.18) .128/.125 (3.25/3.18)
tubing materials: 1/4 (6.35) .254/.250 (6.45/6.35)
Monel 400*, Inconel 600*, Titanium Grade 2*, Nickel 200*, 3/8 (9.53) .379/.375 (9.74/9.53)
Hastelloy C276* - (* Trademark names) 1/2 (12.70) .505/.500 (12.83/12.70)
Please consult factory for stock availabilty.

Catalog Tube Fits Tube Size Inches (mm) Flow Working Pressure psi (bar)*
Number Materials Connection Outside Inside Wall Area 0 - 100F 200F 400F 600F 650F
Type Diameter Diameter Thickness in.2 (mm2) -17.8 to 37.8C 93C 204C 316C 343C

MS15-070 316SS W062 1/16 0.026 0.018 0.0005 15,000 15,000 14,400 13,600 12,600
(1.59) (0.66) (0.46) (0.32) (1034.20) (1034.20) (992.83) (937.67) (868.73)
MS15-200 316SS 0.052 0.036 0.002 15,000 15,000 14,400 13,600 12,600
1/8 (1.32) (0.91) (1.29) (1034.20) (1034.20) (992.83) (937.67) (868.73)
W125
MS15-166= 304SS (3.18) 0.069 0.028 0.004 9,950 9,400 8,550 8,450 8,000
(1.75) (0.71) (2.58) (686.02) (648.10) (589.49) (582.60) (551.57)
MS15-203 316SS 0.084 0.083 0.029 15,000 15,000 14,400 13,600 12,600
(2.13) (2.11) (18.71) (1034.16) (1034.16) (992.83) (937.67) (868.73)
MS15-055 316SS 0.125 0.062 0.012 11,650 11,650 11,250 10,600 9,850
(3.18) (1.57) (7.74) (803.23) (761.86) (775.65) (730.83) (679.12)
W250
MS15-161= 304SS 1/4 0.180 0.035 0.026 5,450 5,150 4,700 4,600 4,400
or
(6.35) (4.57) (0.89) (16.77) (375.76) (355.07) (324.05) (317.15) (303.36)
SW250
MS15-069 316SS 0.180 0.035 0.026 5,450 5,450 5,250 4,950 4,600
(4.57) (0.89) (16.77) (375.76) (375.76) (361.97) (341.29) (317.15)
MS15-158= 304SS 0.194 0.028 0.029 4,600 4,350 3,950 3,900 3,700
(4.93) (0.71) (18.71) (317.15) (299.92) (272.34) (272.34) (255.10)
MS15-204 316SS 0.139 0.118 0.015 15,000 15,000 14,400 13,600 12,600
(3.53) (3.00) (9.79) (1034.16) (1034.16) (992.83) (937.67) (868.73)
MS15-184 304SS W375 0.195 0.090 0.030 10,000 9,400 8,600 8,500 8,450
3/8 (4.95) (2.29) (19.35) (689.46) (648.10) (592.94) (586.05) (582.60)
or
MS15-084 316SS (9.53) 0.195 0.090 0.030 10,000 10,000 9,650 9,000 8,400
SW375
(4.95) (2.29) (19.35) (689.46) (689.46) (665.33) (620.52) (579.15)
MS15-155= 304SS 0.250 0.062 0.049 7,500 7,100 6,450 6,350 6,050
(6.35) (1.57) (31.61) (517.10) (489.52) (444.70) (437.81) (417.13)

All general terms and conditions of sale, including limitations of our liability, apply to all products and services sold.
6
Catalog Tube Fits Tube Size Inches (mm) Flow Working Pressure psi (bar)*
Number Materials Connection Outside Inside Wall Area 0 - 100F 200F 400F 600F 650F
Type Diameter Diameter Thickness in.2 (mm2) -17.8 to - 37.8C 93C 204C 316C 343C

MS15-062 316SS W375 3/8 0.250 0.062 0.049 7,500 7,500 7,200 6,800 6,300
or (9.53) (6.35) (1.57) (31.61) (517.10) (517.10) (496.41) (468.84) (434.36)
MS15-162= 304SS SW375 0.305 0.035 0.073 3,800 3,550 3,250 3,200 3,050
(7.75) (0.89) (47.10) (262.00) (244.76) (224.08) (220.63) (210.29)
MS15-205 316SS 0.270 0.118 0.055 10,000 10,000 9,650 9,000 8,400
(6.86) (3.00) (35.48) (689.46) (689.46) (665.33) (620.52) (579.15)
MS15-208= 304SS W500 1/2 0.270 0.118 0.055 10,000 9,400 8,600 8,500 8,450
or (12.70) (6.86) (3.00) (35.48) (689.46) (648.10) (592.94) (586.05) (582.60
MS15-065 316SS SW500 0.375 0.062 0.110 5,500 5,500 5,250 4,950 4,600
(9.53) (1.57) (70.97) (379.21) (379.21) (361.97) (341.29) (317.15)
MS15-165= 304SS 0.402 0.048 0.127 4,000 3,750 3,400 3,400 3,200
(10.21) (1.22) (81.94) (275.79) (258.55) (234.42) (234.42) (220.63)
*Maximum pressure rating is based on the lowest rating of any component. All dimensions for reference only and subject to change.
Actual working pressure may be determined by tubing pressure rating, if lower. For prompt service, Parker Autoclave Engineers stocks select products.
Consult your local representative.
=
Items are being discontinued. Contact the factory for available stock

Fittings and Tubing - Low Pressure Check Valves

Pressures to 15,000 psi (1034 bar)
O-Ring Check Valves Provide unidirectional flow and tight shut-off for liquids and
gases with high reliability. When differential drops below
cracking pressure*, valve shuts off. (Not for use as relief
valve.)
Materials: 316 Stainless Steel: body, cover, poppet and
cover gland. 300 Series Stainless Steel: spring
Standard O-ring: Viton, for operation to 400 F (204C).
Buna-N or PTFE available for 250F (121C) or 400F (204C)
FLOW
respectively; specify when ordering.
*Cracking Pressure: 20 psi (1.38 bar) 30%. Springs for
Minimum operating temperature for standard o-ring check higher cracking pressures (up to 100 psi (6.89bar)) available
valves 0F (-17.8C). on special order for O-ring style check valves only.
For low temperature option to -100F (-73C) add suffix
LTTO (Low temperature spring & PTFE o-ring).

Ball Check Valves Prevent reverse flow where leak-tight shut-off is not manda-
tory. When differential drops below cracking pressure, valve
closes. With all-metal components, valve can be used up to
650F (343C). See Technical Information section for connec-
tion temperature limitations. (Not for use as a relief valve.)
Ball and poppet are an integral design to assure positive,
in-line seating without chatter. Poppet is designed essen-
tially for axial flow with minimum pressure drop.
FLOW
Materials: 316 Stainless Steel: body, cover, cover gland, ball
poppet. 300 Series Stainless Steel: spring
Minimum operating temperature for standard ball check
valves 0F (-17.8C). CAUTION: While testing has shown O-Rings to provide satisfactory service life, both cyclic and shelf
For low temperature option to -100F (-73C) add suffix life may vary widely with differing service conditions, properties of reactants, pressure and temperature
cycling and age of the O-ring. FREQUENT INSPECTIONS SHOULD BE MADE to detect any deterioration,
LT (Low temperature spring). and O-rings replaced as required.

CAUTION: See Tubing section for proper selection of tubing.

NOTE: For optional material see Needle Valve Options section.

All general terms and conditions of sale, including limitations of our liability, apply to all products and services sold. 7
Ball Type Excess Flow Valves

Protects pressure gauges and pressure instrumentation from

sudden surges in flow or venting in the event of line failure.
Materials: 316 Stainless Steel: body, cover, gland nut and
sleeve. 300 Series Stainless Steel: ball
Vertical Installation: Since this type of check valve employs a
(Vertical Installation Only)

non-spring loaded ball, valve MUST be installed in VERTICAL

position with arrow on valve body pointing UP. (cover gland
up).
FLOW

Resetting Valve: Equalize the pressure across the ball. The

ball will drop and reset automatically.

O-Ring Type Excess Flow Valves

Protects pressure gauges and other pressure instrumenta-

tion from sudden surges in flow due to operator error or line
failure. This valve provides dependable, tight shut-off.
Materials: 316 Stainless Steel: body, cover and sleeve.
O-Ring: Viton for operation to 400F (204C). Buna-N or PTFE
available for 250F (121C) or 400F ( 204C)
respectively; specify when ordering.
(Vertical Installation Only)

Vertical Installation: Since this type of check valve employs a

non-spring loaded poppet, valve MUST be installed in VERTI-
CAL position with arrow on valve body pointing UP. (cover
FLOW

gland up).
Resetting Valve: Equalize the pressure across the poppet.
The poppet will drop and reset automatically.
CAUTION: While testing has shown O-Rings to provide satisfactory service life, both cyclic and shelf
life may vary widely with differing service conditions, properties of reactants, pressure and temperature
cycling and age of the O-ring. FREQUENT INSPECTIONS SHOULD BE MADE to detect any deterioration,
and O-rings replaced as required.

CAUTION: See Tubing section for proper selection of tubing.

NOTE: For optional material see Needle Valve Options section.

8 All general terms and conditions of sale, including limitations of our liability, apply to all products and services sold.
Fittings and Tubing - Low Pressure Check Valves

Fits Pressure Orifice Dimensions - inches (mm)

Catalog Rated
Connection Rating inches
Number Cv A B C D Hex
Type psi (bar)* (mm) Typical

O-Ring Check Valves

SW02200 W125 15,000 0.094 0.15 2.25 1.88 0.31 0.50 0.63
(1034.19) (2.39) (57.15) (47.75) (7.87) (12.70) (15.88)
SW04400 SW250 15,000 0.188 0.63 3.18 2.56 0.44 0.63 0.81
(1034.19) (4.78) (80.77) (65.02) (11.18) (16.00) (20.57)
SW06600 SW375 15,000 0.250 1.70 3.56 3.00 0.53 0.75 1.00
(1034.19) (6.35) (90.42) (76.20) (13.46) (19.05) (25.40)
SW08800 SW500 10,000 0.375 3.40 4.18 3.50 0.53 0.93 1.38
(689.46) (9.53) (106.17) (88.90) (13.46) (23.62) (35.05)

Ball Check Valves

SWB2200 W125 15,000 0.094 0.15 2.25 1.88 0.31 0.50 0.63
(1034.19) (2.39) (57.15) (47.75) (7.87) (12.70) (15.88)
SWB4400 SW250 15,000 0.188 0.63 3.18 2.56 0.44 0.63 0.81
(1034.19) (4.78) (80.77) (65.02) (11.18) (16.00) (20.57)
SWB6600 SW375 15,000 0.250 1.70 3.56 3.00 0.53 0.75 1.00
(1034.19) (6.35) (90.42) (76.20) (13.46) (19.05) (25.40)
SWB8800 SW500 10,000 0.375 3.40 4.18 3.50 0.53 0.93 1.38
(689.46) (9.53) (106.17) (88.90) (13.46) (23.62) (35.05)

Ball Type Excess Flow Valves

SWK2202 W125 15,000 0.094 0.012= 2.25 1.88 0.31 0.50 0.63
(1034.19) (2.39) (57.15) (47.75) (7.87) (12.70) (15.88)
SWK4402 SW250 15,000 0.188 0.037= 3.18 2.56 0.44 0.63 0.81
(1034.19) (4.78) (80.77) (65.02) (11.18) (16.00) (20.57)
SWK6602 SW375 15,000 0.250 0.104= 3.56 3.00 0.53 0.75 1.00
(1034.19) (6.35) (90.42) (76.20) (13.46) (19.05) (25.40)
SWK8802 SW500 10,000 0.375 0.212= 4.18 3.50 0.53 0.93 1.38
(689.46) (9.53) (106.17) (88.90) (13.46) (23.62) (35.05)

O-Ring Type Excess Flow Valves

SWK04400 SW-250 15,000 0.188 3== 3.12 2.56 0.44 0.63 0.81
(1034.19) (4.78) (79.25) (65.02) (11.18) (16.00) (20.57)
SWK06600 SW-375 15,000 0.250 5== 3.50 3.00 0.53 0.75 1.00
(1034.19) (6.35) (88.90) (76.20) (13.46) (19.05) (25.40)
SWK08800 SW-500 10,000 0.375 10== 4.31 3.50 0.53 0.93 1.38
(689.46) (9.53) (109.47) (88.90) (13.46) (23.62) (35.05)

Note:
All check valves are furnished complete with connection components unless otherwise specified.
The 1/16 Tubing System is a complete system for use with all 1/8 components for pressure to 15,000 psi (1034 bar). Consult factory.
= - Check Flow** - water, GPM
== - Check Flow** - CFM, nitrogen @ 500 psi (34.47 bar), RT
** - For flow using alternate fluids, consult Parker Autoclave Engineers. Figure 1

*Maximum pressure rating is based on the lowest rating of any component.

Actual working pressure may be determined by tubing pressure rating, if lower.
A
All dimensions for reference only and subject to change.
For prompt service, Parker Autoclave stocks select products. Consult your local representative. B

HEX D HEX

C C

All general terms and conditions of sale, including limitations of our liability, apply to all products and services sold. 9
Fittings and Tubing - Low Pressure Line Filters
Pressures to 15,000 psi (1034 bar)

Dual-Disc Line Filters

Dual-Disc Line Filters are utilized in numerous industrial,
chemical processing, aerospace, nuclear and other applica-
tions. With the dual-disc design, large contaminant particles
are trapped by the upstream filter element before they can
reach and clog the smaller micron-size downstream element.
Filter elements can be easily replaced.
FLOW Materials: 316 Stainless Steel: Body, covers and gland nuts.
Filters: 316L Stainless Steel.
Filter Elements: Downstream/upstream micron size 35/65 is
standard. 5/10 or 10/35 also available when specified. Other
element combinations available on special order.

Cup-Type Line Filters

High Flow Cup-Type Line Filters are recommended in low
pressure systems requiring both high flow rates and maxi-
mum filter surface area. Widely used in the industrial and
chemical processing fields, the cup design offers as much
as six times the effective filter area as compared to disc-type
units. In addition, the filter elements can be quickly and easily
replaced.
FLOW
Materials: 316 Stainless Steel: Body, covers and gland nuts.
Filter: 316L Stainless Steel.
Filter Elements: 300 Series Stainless Steel sintered cup.
Standard elements available in choice of 5, 35 or 65 micron
sizes. Note: Filter ratings are nominal.

NOTE 1: All filters furnished complete with connection components unless otherwise specified. All
dimensions for reference only and subject to change. For optional materials, see Needle Valve Options
section

NOTE 2: Parker Autoclave Engineers disc and cup type filters are designed to filter small amounts of
process particles. It is recommended that all fluids are thoroughly cleaned prior to entering the higher
pressure system.

NOTE 3: Special material filters may be supplied with four flats in place of standard hex.

NOTE 4: Pressure differential not to exceed 1,000 psi (69 bar) in a flowing condition.

NOTE 5: Larger micron size filter element is installed on the upstream (inlet) side.

10 All general terms and conditions of sale, including limitations of our liability, apply to all products and services sold.
Fittings and Tubing - Low Pressure Line Filters

Pressure Orifice Connection Effective Filter Dimensions - inches (mm)

Catalog Micron Element
Rating inches Size and A B C D Hex
Number Size** Area
psi (bar)* (mm) Type in.2 (mm2) Typical

Dual-Disc Line Filters

SLF2200 35/65
SLF2200-5/10 15,000 .094 5/10 W125 .06 2.31 1.25 0.31 .50 0.62
(1034.19) (2.39) (38.70) (58.67) (31.75) (7.87) (12.70) (15.74)
SLF2200-10/35 10/35
SLF4400 35/65
15,000 .125 SW250 .15 2.94 1.68 0.44 .63 0.81
SLF4400-5/10 (1034.19) (3.18) 5/10 (96.77) (75.56) (42.67) (11.17) (15.88) (20.57)
SLF4400-10/35 10/35
SLF6600 35/65
15,000 .125 SW375 .15 2.94 1.68 0.53 .75 1.00
SLF6600-5/10 5/10
(1034.19) (3.18) (96.77) (75.56) (42.67) (13.46) (19.05) (25.40)
SLF6600-10/35 10/35
SLF8800 35/65
10,000 .188 SW500 .25 3.56 1.94 0.53 .93 1.18
SLF8800-5/10 5/10
(689.46) (4.78) (161.29) (90.42) (49.27) (13.46) (23.62) (29.97)
SLF8800-10/35 10/35

Cup-Type Line Filters

SWF4-5 5
15,000 .188 SW250 0.81 3.18 2.56 0.44 0.63 0.81
SWF4-35 (1034.19) (4.78) 35 (522.57) (80.77) (65.02) (11.17) (15.88) (20.57)
SWF4-65 65
SWF6-5 5
15,000 .312 SW375 0.81 3.56 3.00 0.53 0.75 1.00
SWF6-35 (1034.19) (7.92) 35 (522.57) (90.42) (76.20) (13.46) (19.05) (25.40)
SWF6-65 65
SWF8-5 5
10,000 .438 SW500 1.53 4.18 3.50 0.53 .93 1.38
SWF8-35 35
(689.46) (11.13) (987.09) (106.17) (88.90) (13.46) (23.62) (35.05)
SWF8-65 65

** Larger micron size filter element is installed on upstream (inlet) side. All filters furnished complete *Maximum pressure rating is based on the lowest rating of any component.
with connection components unless otherwise specified. Actual working pressure may be determined by tubing pressure rating, if lower.
All dimensions for reference only and subject to change.
Other micron sizes available on special order. Change last digits of the catalog number accordingly. For
optional materials, see Needle Valve Options section. For prompt service, Parker Autoclave Engineers stocks select products. Consult your local
representative.
The 1/16 Tubing System is a complete system for use with all 1/8 components for pressure to 15,000
psi (1034 bar). Consult factory.

Dual-Disc Line Filters Cup-Type Line Filters

A A
D
D
B HEX C B C HEX
C C

HEX HEX

All general terms and conditions of sale, including limitations of our liability, apply to all products and services sold. 11
WARNING
FAILURE, IMPROPER SELECTION OR IMPROPER USE OF THE PRODUCTS AND/OR SYSTEMS DESCRIBED HEREIN OR RELATED ITEMS CAN CAUSE DEATH, PERSONAL INJURY AND PROPERTY DAMAGE.
This document and other information from Parker Hannifin Corporation, its subsidiaries and authorized distributors provide product and/or system options for further investigation by users having technical
expertise. It is important that you analyze all aspects of your application and review the information concerning the product or system in the current product catalog. Due to the variety of operating conditions
and applications for these products or systems, the user, through its own analysis and testing, is solely responsible for making the final selection of the products and systems and assuring that all performance,
safety and warning requirements of the application are met. The products described herein, including without limitation, product features, specifications, designs, availability and pricing, are subject to change by
Parker Hannifin Corporation and its subsidiaries at any time without notice.

Offer of Sale
The items described in this document are available for sale by Parker Hannifin Corporation, its subsidiaries or its authorized distributors. Any sale contract entered by Parker will be governed by the provisions
stated in Parker's standard terms and conditions of sale (copy available upon request).

2013 Parker Hannifin Corporation | Autoclave Engineers is a registered trademark of the Parker Hannifin Corporation 02-0123SE January2013

Caution! Do not mix or interchange parts or tubing with those of

other manufacturers. Doing so is unsafe and will void warranty.

Caution! Parker Autoclave Engineers Valves, Fittings and Tools are

Instrumentation Products Division Parker Hannifin Manufacturing Ltd.
not designed to work with common commercial instrument tubing
Autoclave Engineers Operation Instrumentation Products Division, Europe and will only work with tubing built to Parker Autoclave Engineers
8325 Hessinger Drive Industrial Estate Whitemill AES Specifications. Failure to do so will void warranty.
Erie, Pennsylvania 16509-4679 USA Wexford, Republic of Ireland
PH: 814-860-5700 FAX: 814-860-5811 PH: 353 53 914 1566
www.autoclave.com FAX: 353 53 914 1582 ISO-9001 Certified
Fittings, Tubing & Nipples
Medium Pressure
Pressures to 20,000 psi (1379 bar)

Since 1945 Parker Autoclave Engineers has designed

and built premium quality valves, fittings and tubing.
This commitment to engineering and manufacturing
excellence has earned Parker Autoclave Engineers
a reputation for reliable, efficient product perfor-
mance. Parker Autoclave Engineers has long been
established as the world leader in high pressure fluid
handling components for the chemical/petrochemi-
cal, research, and oil and gas industries.

Medium Pressure Fittings, Tubing and Nipples Features:

Fittings ,Tubing & Nipples - Medium Pressure

Coned-and-Threaded Connection.
Available sizes are 1/4", 3/8", 9/16", 3/4", 1" and 1-1/2".
Fittings manufactured from cold worked 316 stainless steel.
Tubing is manufactured from dual rated 316/316L and 304/304L cold
worked stainless steel.
Operating Temperatures from -423F (-252C) to 1200F (649C).
Anti-vibration connection components available.
All items available in special material.

The medium pressure series uses Parker Autoclave Engineers medium pressure connection.
This coned-and-threaded connection features orifice sizes to match the high flow characteristics
of this series.

www.autoclave.com
Medium Pressure Fittings
Pressures to 20,000 psi (1379 bar)

Parker Autoclave Engineers medium pressure fittings,

Series SF, are designed for use with Series 20SM medium
pressure valves and Parker Autoclave Engineers' medium
pressure tubing. They incorporate medium pressure
coned-and-threaded connections with orifices sized to
match the high-flow Series 20SC valves.

Connection Components
All Parker Autoclave valves and fittings are supplied complete with appropriate glands and collars. To order these components
separately, use order numbers listed. When using plug, collar is not required.

Gland Collar Plug

CGLX ( ) CCLX ( ) CPX ( )

Add tube size ( ) Example: To ensure proper fit use Parker Autoclave Engineers tubing.
1/4 - 40 1/4 Gland - CGLX 40
3/8 - 60 Note: Special material glands may be supplied with four flats
9/16 - 90 in place of standard hex.
3/4 - 120
1 - 160
1-1/2" - 240

Outside Pressure Dimensions - inches (mm)

Catalog Connection Minimum Block Fitting
Diameter Rating Opening Thickness
Number Type A B C D E F G Pattern
Tube psi (bar)* Typical Thickness

Elbow
CLX4400 SF250CX 1/4 20,000 0.125 1.12 1.50 0.38 0.50 0.75 0.75 0.62
(6.35) (1378.93) (3.18) (28.45) (38.10) (9.53) (12.70) (19.05) (19.05) (15.75)
CLX6600 SF375CX 3/8 20,000 0.219 1.38 2.00 0.44 0.62 1.00 1.00 0.75
(9.53) (1378.93) (5.56) (35.05) (50.80) (11.10) (15.75) (25.40) (25.40) (19.05)
CLX9900 SF562CX 9/16 20,000 0.359 1.75 2.50 0.53 0.94 1.25 1.25 1.00
(14.29) (1378.93) (9.12) (44.45) (63.50) (13.46) (23.88) (31.75) (31.75) (25.40) See
CLX12 SF750CX 3/4 20,000 0.516 2.25 3.00 0.62 1.19 1.50 1.50 1.38 Figure 1
(19.05) (1378.93) (13.11) (57.15) (76.20) (15.75) (30.23) (38.10) (38.10) (34.93)
CLX16 SF1000CX 1 20,000 0.688 3.00 4.12 0.72 1.38 2.06 2.06 1.75
(25.40) (1378.93) (17.48) (76.20) (104.65) (18.29) (35.05) (52.32) (52.32) (44.45)
CLX24 SF1500CX 1-1/2 15,000 0.94 4.00 5.75 1.12 1.88 2.88 2.88 2.25
(38.10) (1034.20) (23.80) (101.60) (146.05) (28.45) (47.63) (73.03) (73.03) (57.15)

*Maximum pressure rating is based on the lowest rating Figure 1 For mounting hole option add suffix PM to catalog number.
of any component. Consult factory for mounting hole dimensions.
Actual working pressure may be determined by tubing
pressure rating, if lower. D HEX
All dimensions for reference only and subject to change.
F
For prompt service, Parker Autoclave Engineers stocks select products.
Consult your local representative.
C

E
A

B
Elbow

Tee
CTX4440 SF250CX 1/4 20,000 0.125 1.12 1.50 0.38 0.50 0.75 0.75 0.62
(6.35) (1378.93) (3.18) (28.45) (38.10) (9.53) (12.70) (19.05) (19.05) (15.75)
CTX6660 SF375CX 3/8 20,000 0.219 1.38 2.00 0.44 0.62 1.00 1.00 0.75
(9.53) (1378.93) (5.56) (35.05) (50.80) (11.10) (15.75) (25.40) (25.40) (19.05)
CTX9990 SF562CX 9/16 20,000 0.359 1.75 2.50 0.53 0.94 1.25 1.25 1.00
(14.29) (1378.93) (9.12) (44.45) (63.50) (13.46) (23.88) (31.75) (31.75) (25.40) See
CTX12 SF750CX 3/4 20,000 0.516 2.25 3.00 0.62 1.19 1.50 1.50 1.38 Figure 2
(19.05) (1378.93) (13.11) (57.15) (76.20) (15.75) (30.23) (38.10) (38.10) (34.93)
CTX16 SF1000CX 1 20,000 0.688 3.00 4.12 0.72 1.38 2.06 2.06 1.75
(25.40) (1378.93) (17.48) (76.20) (104.65) (18.29) (35.05) (52.32) (52.32) (44.45)
CTX24 SF1500CX 1-1/2 15,000 0.94 4.00 5.75 1.12 1.88 2.88 2.88 2.25
(38.10) (1034.20) (23.80) (101.60) (146.05) (28.45) (47.63) (73.03) (73.03) (57.15)

Cross
CXX4444 SF250CX 1/4 20,000 0.125 1.50 1.50 0.38 0.50 0.75 0.75 0.62
(6.35) (1378.93) (3.18) (38.10) (38.10) (9.53) (12.70) (19.05) (19.05) (15.75)
CXX6666 SF375CX 3/8 20,000 0.219 2.00 2.00 0.44 0.62 1.00 1.00 0.75
(9.53) (1378.93) (5.56) (50.80) (50.80) (11.10) (15.75) (25.40) (25.40) (19.05)
CXX9999 SF562CX 9/16 20,000 0.359 2.50 2.50 0.53 0.94 1.25 1.25 1.00
(14.29) (1378.93) (9.12) (63.50) (63.50) (13.46) (23.88) (31.75) (31.75) (25.40) See
CXX12 SF750CX 3/4 20,000 0.516 3.00 3.00 0.62 1.19 1.50 1.50 1.38 Figure 3
(19.05) (1378.93) (13.11) (76.20) (76.20) (15.75) (30.23) (38.10) (38.10) (34.93)
CXX16 SF1000CX 1 20,000 0.688 4.12 4.12 0.72 1.38 2.06 2.06 1.75
(25.40) (1378.93) (17.48) (104.65) (104.65) (18.29) (35.05) (52.32) (52.32) (44.45)
CXX24 SF1500CX 1-1/2 15,000 0.94 5.75 5.75 1.12 1.88 2.88 2.88 2.25
(38.10) (1034.20) (23.80) (146.05) (146.05) (28.45) (47.63) (73.03) (73.03) (57.15)

*Maximum pressure rating is based on the lowest rating of any component. For mounting hole option add suffix PM to catalog number.
Actual working pressure may be determined by tubing pressure rating, Consult factory for mounting hole dimensions.
if lower.
All dimensions for reference only and subject to change. Figure 2
For prompt service, Parker Autoclave Engineers stocks select products.
Consult your local representative.
D HEX
F
C

E
A

Tee

Figure 3

D HEX
F
C

E
A

B
Cross

All general terms and conditions of sale, including limitations of our liability, apply to all products and services sold. 3
Outside Pressure Dimensions - inches (mm)
Catalog Connection Minimum Block Fitting
Diameter Rating Opening A B C D E F G Thickness
Number Type Pattern
Tube psi (bar)* Typical Thickness

Straight Coupling / Union Coupling

20FX4466 SF250CX 1/4 20,000 0.125 0.62 1.62 0.38 0.50 Straight
20UFX4466 (6.35) (1378.93) (3.18) (15.75) (41.15) (9.53) (12.70) Union
20FX6666 SF375CX 3/8 20,000 0.219 0.75 1.75 0.44 0.62 Straight
20UFX6666 (9.53) (1378.93) (5.56) (19.05) (44.45) (11.10) (15.75) Union
20FX9966 SF562CX 9/16 20,000 0.359 1.00 2.12 0.53 0.94 Straight
20UFX9966 (14.29) (1378.93) (9.12) (25.40) (53.85) (13.46) (23.88) Union See
20FX12 SF750CX 3/4 20,000 0.516 1.38 2.50 0.62 1.19 Straight Figure 4
20UFX12 (19.05) (1378.93) (13.11) (35.05) (63.50) (15.75) (30.23) Union
20FX16 SF1000CX 1 20,000 0.688 1.75 3.50 0.72 1.38 Straight
20UFX16 (25.40) (1378.93) (17.48) (44.45) (88.90) (18.29) (35.05) Union
15FX24 SF1500CX 1-1/2 15,000 0.94 2.25 5.00 1.12 1.88 Straight
15UFX24 (38.10) (1034.20) (23.80) (25.15) (127.00) (28.45) (47.63) Union

Bulkhead Coupling
20BFX4466 SF250CX 1/4 20,000 0.125 0.81 1.88 0.38 0.50 0.53 1.00 0.38
(6.35) (1378.93) (3.18) (20.57) (47.75) (9.53) (12.70) (13.46) (25.40) (9.53)
20BFX6666 SF375CX 3/8 20,000 0.219 0.94 2.00 0.44 0.62 0.62 1.00 0.38
(9.53) (1378.93) (5.56) (23.88) (50.80) (11.10) (15.75) (15.75) (25.40) (9.53)
20BFX9966 SF562CX 9/16 20,000 0.359 1.12 2.38 0.53 0.94 0.78 1.38 0.38
(14.29) (1378.93) (9.12) (28.45) (60.45) (13.46) (23.88) (19.81) (35.05) (9.53) See
20BFX12 SF750CX 3/4 20,000 0.516 1.69 2.62 0.62 1.19 0.91 1.88 0.38 Figure 5
(19.05) (1378.93) (13.11) (42.93) (66.55) (15.75) (30.23) (23.11) (47.75) (9.53)
20BFX16 SF1000CX 1 20,000 0.688 1.94 3.50 0.72 1.38 1.50 1.88+ 0.38
(25.40) (1378.93) (17.48) (49.28) (88.90) (18.29) (35.05) (38.10) (47.75) (9.53)
15BFX24 SF1500CX 1-1/2 15,000 0.94 2.44 5.00 1.12 1.88 2.00 2.50+ 0.38
(38.10) (1034.20) (23.80) (61.85) (127.00) (28.45) (47.63) (50.80) (63.50) (9.53)

*Maximum pressure rating is based on the lowest rating of any Union Couplings are designed with a removable seat insert
component. Actual working pressure may be determined by tubing allowing disassembly and tubing removal without the necessity of
pressure rating, if lower. loosening other items in a line.
+ distance across flats
All dimensions for reference only and subject to change.
For prompt service, Parker Autoclave Engineers stocks select
products. Consult your local representative.
Figure 4

A HEX

D
HEX

B C

Straight Coupling / Union Coupling

Figure 5

G MAX

F D
HEX HEX A

E
B C
(A=Panel hole drill size)

Bulkhead Coupling

4 All general terms and conditions of sale, including limitations of our liability, apply to all products and services sold.
Medium Pressure Tubing
Pressures to 20,000 psi (1379 bar)

Parker Autoclave Engineers offers a complete selection of austenetic, cold drawn

stainless steel tubing designed to match the performance standards of Parker
Autoclave valves and fittings. Parker Autoclave Engineers medium pressure tubing
is manufactured specifically for high pressure applications requiring both strength
and corrosion resistance. The tubing is furnished in random lengths between 20 feet
(6 meters) and 26.5 feet (8.0 meters). The average is 24 feet (7.3 meters). Medium
Pressure Tubing is available in six sizes and a variety of materials.
Inspection and Testing
Parker Autoclave Engineers' medium pressure tubing is inspected to assure freedom from seams, laps, fissures or other flaws, as
well as carburization or intergranular carbide precipitation. The outside and inside diameters of the tubing are subject to special
inspection and are controlled within close tolerences to assure proper fit. Sample pieces of tube for each lot are tested to confirm
mechanical properties. Hydrostatic testing is also performed on a statistical basis and is conducted at the working pressure of the
tube. Parker Autoclave will perform 100% hydrostatic testing at additional cost if desired.

Special Materials Tubing Tolerance

In addition to the type 316/316L and 304/304L stainless Nominal Tubing Size Tolerance/Outside Diameter
steel tubing listed in this section, Autoclave has limited inches (mm) inches (mm)
stock of hard-to-obtain special tubing materials: 1/4 (6.35) .248/.243 (6.30/6.17)
Monel 400*, Inconel 600*, Inconel 625*, Duplex, Super 3/8 (9.53) .370/.365 (9.40/9.27)
Duplex, Titanium Grade 2*, Nickel 200*, Hastelloy C276* 9/16 (14.27) .557/.552 (14.15/14.02)
(*Trademark names) Some are available in shorter 3/4 (19.05) .745/.740 (18.92/18.80)
lengths only. Please consult factory for stock availability. 1 (25.40) .995/.990 (25.27/25.14)
1-1/2 (38.10) 1.495/1.490 (37.98/37.85)

Catalog Tube Fits Tube Size Inches (mm) Flow Working Pressure psi (bar)*
Number Material Connection Outside Inside Wall Area -423 to 100F 200F 400F 600F 800F
Type Diameter Diameter Thickness in.2 (mm2) -252 to 37.8C 93C 204C 316C 427C

MS15-092 316SS 20,000 20,000 19,250 18,050 16,800

SF250CX 1/4 0.109 0.070 0.009 (1378.93) (1378.93) (1327.22) (1244.48) (1158.30)
MS15-192 304SS (6.35) (2.77) (1.78) (5.81) 20,000 18,950 17,200 17,000 16,150
(1378.93) (1306.54) (1185.88) (1172.09) (1113.49)
MS15-093 316SS 20,000 20,000 19,250 18,050 16,800
SF375CX 3/8 0.203 0.086 0.032 (1378.93) (1378.93) (1327.22) (1244.48) (1158.30)
MS15-193 304SS (9.53) (5.16) (2.18) (20.65) 20,000 20,000 19,250 18,050 16,800
(1378.93) (1378.93) (1327.22) (1244.48) (1158.30)
MS15-085 316SS 20,000 20,000 19,250 18,050 16,800
SF562CX 9/16 0.312 0.125 0.076 (1378.93) (1378.93) (1327.22) (1244.48) (1158.30)
MS15-187 304SS (14.29) (7.92) (3.18) (49.03) 20,000 20,000 19,250 18,050 16,800
(1378.93) (1378.93) (1327.22) (1244.48) (1158.30)
MS15-097 316SS 15,000 15,000 14,400 13,650 12,670
SF562CX 9/16 0.359 0.101 0.101 (1034.16) (1034.16) (992.83) (941.12) (873.55)
MS15-194 304SS (14.29) (9.12) (2.57) (65.16) 15,000 14,170 12,900 12,750 12,670
(1034.16) (976.97) (889.41) (879.07) (873.55)
MS15-095 316SS 0.438 0.156 0.151 20,000 20,000 19,250 18,050 16,800
SF750CX 3/4 (11.13) (3.96) (97.42) (1378.93) (1378.93) (1327.22) (1244.48) (1158.30)
MS15-098 316SS (19.05) 0.516 0.117 0.209 15,000 15,000 14,400 13,650 12,670
(13.11) (2.97) (134.84) (1034.16) (1034.16) (992.83) (941.12) (873.55)
MS15-096 316SS 0.562 0.219 0.248 20,000 20,000 19,250 18,050 16,800
1 (14.27) (5.56) (160.00) (1378.93) (1378.93) (1327.22) (1244.48) (1158.30)
MS15-099 316SS SF1000CX (25.40) 0.688 0.156 0.371 15,000 15,000 14,400 13,650 12,670
(17.48) (3.96) (239.35) (1034.16) (1034.16) (992.83) (941.12) (873.55)
13041 316SS SF1500CX 1-1/2 0.937 0.281 0.589 15,000 15,000 14,430 13,530 12,600
(38.10) (23.80) (7.15) (444.88) (1034.16) (1034.16) (994.90) (932.85) (868.73)

Note: Caution should be exercised in proper selection of Medium Pressure Tubing based on actual operating conditions. Two series available: 15,000 psi (1034 bar) and 20,000 psi (1379 bar).
*Maximum pressure rating is based on the lowest rating of any component.
Actual working pressure may be determined by tubing pressure rating, if lower.
All dimensions for reference only and subject to change.
For prompt service, Parker Autoclave Engineers stocks select products. Consult your local representative.

All general terms and conditions of sale, including limitations of our liability, apply to all products and services sold. 5
Medium Pressure Coned-and-Threaded Nipples
Pressures to 20,000 psi (1379 bar)

For rapid system make-up, Parker Autoclave Engineers sup-

plies pre-cut, coned-and-threaded nipples in various sizes and
lengths for Parker Autoclave Engineers medium pressure valves
and fittings.

Special lengths
In addition to the standard lengths listed in the table below,
nipples are available in any custom length. Consult factory.

Materials**
Catalog numbers in table refer to Type 316 Stainless steel.
Optional materials available. Consult factory.

Catalog Number Working

Fits Tube Size inches
Nipple Length In (mm) Pressure
Connection (mm)
2.75 3.00 4.00 6.00 8.00 10.00 12.00 at 100F
Type
(69.85) (76.20) (101.60) (152.40) (203.20) (254.00) (304.80) O.D. I.D. psi (bar)*

CNX4402-316 CNX4403-316 CNX4404-316 CNX4406-316 CNX4408-316 CNX44010-316 CNX44012-316 SF250CX 1/4 0.109 20,000
(6.35) (2.77) (1378.93)

CNX6603-316 CNX6604-316 CNX6606-316 CNX6608-316 CNX66010-316 CNX66012-316 SF375CX 3/8 0.203 20,000
(9.53) (5.16) (1378.93)

CNX9904-316 CNX9906-316 CNX9908-316 CNX99010-316 CNX99012-316 SF562CX 9/16 0.312 20,000

(14.29) (7.92) (1378.93)

CNLX9904-316 CNLX9906-316 CNLX9908-316 CNLX99010-316 CNLX99012-316 SF562CX 9/16 0.359 15,000

(14.29) (9.12) (1034.16)

CNX1204-316 CNX1206-316 CNX1208-316 CNX12010-316 CNX12012-316 SF750CX 3/4 0.438 20,000

(19.05) (11.13) (1378.93)

CNLX1204-316 CNLX1206-316 CNLX1208-316 CNLX12010-316 CNLX12012-316 SF750CX 3/4 0.516 15,000

(19.05) (13.11) (1034.16)

CNX1606-316 CNX1608-316 CNX16010-316 CNX16012-316 SF1000CX 1 0.562 20,000

(25.40) (14.27) (1378.93)

CNLX1606-316 CNLX1608-316 CNLX16010-316 CNLX16012-316 SF1000CX 1 0.688 15,000

(25.40) (17.48) (1034.16)

CNLX2406-316 CNLX2408-316 CNLX24010-316 CNLX24012-316 SF1500CX 1-1/2 0.937 15,000

(38.10) (23.79) (1034.16)

Note: Caution should be exercised when selecting medium pressure nipples since two series
are available: 15,000 psi (1034.16 bar) and 20,000 psi (1379 bar)

See medium pressure tubing section for pressures at various temperatures.

*Maximum pressure rating is based on the lowest rating of any component.

Actual working pressure may be determined by tubing pressure rating, if lower.
**Type 304 Stainless Steel nipples available.
All dimensions for reference only and subject to change.

6 All general terms and conditions of sale, including limitations of our liability, apply to all products and services sold.
Medium Pressure Check Valves
Pressures to 20,000 (1379 bar)

O-Ring Check Valves

Provides unidirectional flow and tight shut-off for liquids and
gas with high reliability. When differential drops below crack-
ing pressure*, valve shuts off. (Not for use as relief valve.)
Materials: 316 Stainless Steel: body, cover, poppet, cover
gland. 300 Series Stainless Steel: spring
Standard O-ring: Viton, for operation to 400 F (204C).
Buna-N or PTFE available for 250F (121C) or 400F (204C)
FLOW respectively; specify when ordering.
*Cracking Pressure: 20 psi (1.38 bar) 30%. Springs for
Minimum operating temperature for standard o-ring check higher cracking pressures (up to 100 psi (6.89 bar)) available
valves 0F (-17.8C). on special order for O-ring style check valves only.
For low temperature option to -423F (-252C) add suffix
LTTO (Low temperature spring & PTFE o-ring).

Ball Check Valves Prevents reverse flow where leak-tight shut-off is not manda-
tory. When differential drops below cracking pressure, valve
closes. With all-metal components, valve can be used up to
1200F (649C). See Technical Information section for con-
nection temperature limitations. (Not for use as a relief valve.)
The ball and poppet are an integral design to assure
positive, in-line seating without chatter. Poppet is designed
essentially for axial flow with minimum pressure drop.
FLOW Materials: 316 Stainless Steel: body, cover, ball poppet,
cover gland. 300 Series Stainless Steel: ball, spring.
Minimum operating temperature for standard ball check
valves -110F (-79C).
For low temperature option to -423F (-252C) add suffix
LT (Low temperature spring).
Protects pressure gauges and pressure instrumentation from
Ball Type Excess Flow Valves surges in flow or sudden venting in the event of line failure.
Materials: 316 Stainless Steel: body, cover, sleeve, cover
gland. 300 Series Stainless Steel: ball.
Vertical Installation: Since this type of check valve employs a
non-spring loaded ball, valve MUST be installed in VERTICAL
position with arrow on valve body pointing UP. (cover gland up).
Resetting Valve: Equalize the pressure across the ball. The
ball will drop and reset automatically.
(Vertical Installation Only)

cycling and age of the O-ring. FREQUENT INSPECTIONS SHOULD BE MADE to detect any deterioration,
and O-rings replaced as required.

CAUTION: See Tubing section for proper selection of tubing.

NOTE: For optional material see Needle Valve Options section.

NOTE: Special material check valves may be supplied with four flats in place of standard hex.

All general terms and conditions of sale, including limitations of our liability, apply to all products and services sold. 7
Medium Pressure Check Valves

Fits Pressure Orifice Dimensions - inches (mm)

Catalog Rated
Connection Rating inches
Number Cv A B C D Hex
Type psi (bar)* (mm) Typical

O-Ring Check Valves

CXO4400 SF250CX 20,000 0.125 0.28 2.94 2.50 0.38 0.50 0.81
(1378.93) (3.18) (74.68) (63.50) (9.53) (12.70) (20.57)
CXO6600 SF375CX 20,000 0.218 0.84 3.12 2.62 0.47 0.62 1.00
(1378.93) (5.54) (79.25) (66.55) (11.94) (15.75) (25.40)
CXO9900 SF562CX 20,000 0.359 2.30 4.18 3.50 0.53 0.94 1.38
(1378.93) (9.12) (106.17) (88.90) (13.46) (23.88) (35.05)
CXO12 SF750CX 20,000 0.516 4.70 5.50 4.75 0.62 1.19 1.75
(1378.93) (13.11) (139.70) (120.65) (15.75) (30.23) (44.45)
CXO16 SF1000CX 20,000 0.688 7.40 6.63 5.75 0.72 1.38 1.88
(1378.93) (17.48) (168.40) (146.05) (18.29) (35.05) (47.75)
CXO24 SF1500CX 15,000 0.94 14.00 9.01 7.25 1.12 1.88 3.00
(1034.20) (23.80) (228.85) (184.15) (28.45) (47.75) (76.20)

Ball Check Valves

CXB4400 SF250CX 20,000 0.125 0.28 2.94 2.50 0.38 0.50 0.81
(1378.93) (3.18) (74.68) (63.50) (9.53) (12.70) (20.57)
CXB6600 SF375CX 20,000 0.218 0.84 3.12 2.62 0.47 0.62 1.00
(1378.93) (5.54) (79.25) (66.55) (11.94) (15.75) (25.40)
CXB9900 SF562CX 20,000 0.359 2.30 4.18 3.50 0.53 0.94 1.38
(1378.93) (9.12) (106.17) (88.90) (13.46) (23.88) (35.05)
CXB12 SF750CX 20,000 0.516 4.70 5.50 4.75 0.62 1.19 1.75
(1378.93) (13.11) (139.70) (120.65) (15.75) (30.23) (44.45)
CXB16 SF1000CX 20,000 0.688 7.40 6.63 5.75 0.72 1.38 1.88
(1378.93) (17.48) (168.40) (146.05) (18.29) (35.05) (47.75)
CXB24 SF1500CX 15,000 0.94 14.00 9.01 7.25 1.12 1.88 3.00
(1034.20) (23.80) (228.85) (184.15) (28.45) (47.75) (76.20)

Ball Type Excess Flow Valves

CXK4402 SF250CX 20,000 0.125 0.037+ 2.94 2.50 0.38 0.50 0.81
(1378.93) (3.18) (74.68) (63.50) (9.65) (12.70) (20.57)
CXK6602 SF375CX 20,000 0.218 0.066+ 3.12 2.62 0.47 0.62 1.00
(1378.93) (5.54) (79.25) (66.55) (11.94) (15.75) (25.40)
CXK9902 SF562CX 20,000 0.359 .212+ 4.18 3.50 0.53 0.94 1.38
(1378.93) (9.12) (106.17) (88.90) (13.46) (23.88) (35.05)
CXK1202 SF750CX 20,000 0.516 .368+ 5.12 4.38 0.62 1.19 1.75
(1378.93) (13.11) (130.05) (111.25) (15.75) (30.23) (44.45)
CXK1602 SF1000CX 20,000 0.688 .864+ 6.50 5.62 0.72 1.38 1.88
(1378.93) (17.48) (165.10) (142.75) (18.29) (35.05) (47.75)
Note:
distance across flats
+
Check Flow - water, GPM
All dimensions for reference only and subject to change.
For flow rates using alternate fluids, consult Parker Autoclave Engineers.
For prompt service, Parker Autoclave Engineers stocks select products. Consult your local representative.

*Maximum pressure rating is based on the lowest rating of any component.

Actual working pressure may be determined by tubing pressure rating, if lower.

Figure 1

A
B

D HEX
HEX

C C

8 All general terms and conditions of sale, including limitations of our liability, apply to all products and services sold.
Medium Pressure Line Filters
Pressures to 20,000 psi (1379 bar)

Dual-Disc Line Filters

Parker Autoclave Engineers Dual-Disc Line Filters are utilized
in numerous industrial, chemical processing, aerospace, nu-
clear and other applications. With the dual-disc design, large
contaminant particles are trapped by the upstream filter ele-
ment before they can reach and clog the smaller micron-size
downstream element. Filter elements can be easily replaced.
FLOW Materials: 316 Stainless Steel: body, cover, cover gland.
300 Series Stainless Steel: filter elements.
Filter Elements: Downstream/upstream micron size 35/65 is
standard. 5/10 or 10/35 also available when specified. Other
element combinations available on special order.

Cup-Type Line Filters

Parker Autoclave Engineers High Flow Cup-Type Line Filters
are recommended in high pressure systems requiring both
high flow rates and maximum filter surface area. Widely
used in the industrial and chemical processing fields, the cup
design offers as much as six times the effective filter area as
compared to disc-type units. In addition, the filter elements
can be quickly and easily replaced.
FLOW Materials: 316 Stainless Steel: body, cover, cover gland.
300 Series Stainless Steel: filter element.
Filter Elements: Sintered cup elements available in choice of
5, 35 or 65 micron sizes. Note: Filter ratings are nominal.

NOTE 1: All filters furnished complete with connection components unless otherwise specified. All
dimensions for reference only and subject to change.

For optional materials, see Needle Valve Options section

NOTE 3: Special material filters may be supplied with four flats in place of standard hex.

NOTE 4: Pressure differential not to exceed 1,000 psi (69 bar) in a flowing condition.

NOTE 5: Larger micron size filter element is installed on the upstream (inlet) side.

All general terms and conditions of sale, including limitations of our liability, apply to all products and services sold. 9
Pressure Orifice Connection Effective Filter Dimensions - inches (mm)
Catalog Micron Element
Rating inches Size and A B C D Hex
Number Size** Area
psi (bar)* (mm) Type in.2 (mm2) Typical

Dual-Disc Line Filters

CLFX9900 20,000 0.312 35/65

(1378.93) (7.92)

CLFX9900-5/10 20,000 0.312 5/10 SF562CX 0.25 4.94 2.68 0.53 .94 1.38
(1378.93) (7.92) (161.29) (125.48) (68.07) (13.46) (23.88) (35.05)

CLFX9900-10/35 20,000 0.312 10/35

(1378.93) (7.92)

Cup-Type Line Filters

CXF4-5 20,000 0.125 5 0.81 2.94 2.50 0.38 .50 0.81
CXF4-35 (1378.93) (3.18) 35 SF250CX (522.57) (74.68) (63.50) (9.53) (12.70) (20.57)
CXF4-65 65
CXF6-5 20,000 0.218 5 0.81 3.12 2.62 0.47 .62 1.00
CXF6-35 (1378.93) (5.54) 35 SF375CX (522.57) (79.25) (66.55) (11.99) (15.75) (25.40)
CXF6-65 65
CXF9-5 20,000 0.359 5 1.53 4.18 3.50 0.53 .94 1.38
CXF9-35 (1378.93) (9.12) 35 SF562CX (987.09) (106.17) (88.90) (13.46) (23.88) (35.05)
CXF9-65 65
CXF12-10 20,000 0.516 10 2.65 5.50 4.75 .62 1.50 1.75
SF750CX
CXF12-35 (1378.93) (13.10) 35 (1709.67) (139.7) (120.65) (15.75) (38.10) (44.45)
CXF16-5 5 5.00 6.62 5.75 0.72 1.38 2.12
CXF16-10 20,000 0.688 10 (3225.80) (168.15) (146.05) (18.29) (35.05) (53.05)
SF1000CX
CXF16-35 (1378.93) (17.48) 35
CXF16-65 65
Note:
**Other micron sizes available on special order. Change last digits of the catalog number accordingly.
For optional materials, see Needle Valve Options section.

*Maximum pressure rating is based on the lowest rating of any component.

Dual-Disc Line Filters

A
D
B HEX
C C

HEX

Cup-Type Line Filters

A
B

HEX D HEX

C C

10 All general terms and conditions of sale, including limitations of our liability, apply to all products and services sold.
Anti-Vibration Collet Gland Assembly
Pressures to 20,000 psi (1379 bar)

Series KCBGLX Sizes to 1-1/2 (38.10 mm)

For extreme conditions of vibration and/or shock in tubing
systems, such as an unsupported line near a compressor, coned- Gland Nut Slotted Collet
and-threaded connections are offered with the Parker Autoclave
anti-vibration collet gland assembly. Completely interchangeable
with standard Parker Autoclave Engineers medium pressure Collet grips tubing
here for
Collet Body
connections, the collet gland assembly provides equally effective anti-vibration
pressure handling capability. support

Valve or fitting body

In standard connection systems, the bending stresses on the
threaded area of the tubing imposed by excessive vibration or
Collar
movement may cause premature fatigue failure of the tubing at
the back of the thread. By moving the stress concentration back
to the unthreaded part of the tubing and providing a wedge-type
gripping action, the Parker Autocalve Engineers anti-vibration
collet gland assembly strengthens the entire structure. With
stress concentration reduced and overall stress level maintained Line contact
seating
well below the endurance limit of the material, the result is virtu-
ally unlimited vibrational fatigue life.
Series KCBGLX
A less complex and more economical design than other vibra- Pressures to 20,000 (1379 bar)
tion-resistant connections, the collet gland assembly utilizes the
same coned-and-threaded features of Parker Autoclave Engineers
medium pressure connections. Series KCBGLX extends the gland
Materials
Type 316 stainless steel with bonded dry film (316 MC) moly
nut to provide room for the tapered slotted collet. The design
lubricant.
provides a slight difference in angles between the collet and the
Note: 1) To order components with anti-vibration assemblies add -K
corresponding taper of the gland nut. As the nut is tightened,
to catalog numbers.
it acts to wedge the tapered end of the collet into a gripping
2) Special material assemblies may be supplied with four flats
engagement with the tubing.
in place of standard hex.
Outside Dimensions - inches (mm)
Catalog Diameter
Number Part Tubing Size A B Hex
in. (mm)
KCBGLX40-316MC Complete assembly Hex
KCBLX40-316MC Collet body 1/4 0.94 1.19 0.62
KCCLX40-316MC Slotted collet (6.35) (23.88) (30.23) (15.75)
KGLX40-316MC Gland nut
KCBGLX60-316MC Complete assembly
KCBLX60-316MC Collet body 3/8 1.19 1.50 0.81
A
B
KCCLX60-316MC Slotted collet (9.53) (30.23) (38.10) (20.63)
KGLX60-316MC Gland nut
KCBGLX90-316MC Complete assembly
KCBLX90-316MC Collet body 9/16 1.41 1.78 0.94
KCCLX90-316MC Slotted collet (14.29) (35.81) (45.21) (23.88)
KGLX90-316MC Gland nut
KCBGLX120-316MC Complete assembly
KCBLX120-316MC Collet body 3/4 1.59 2.00 1.25
KCCLX120-316MC Slotted collet (19.05) (40.37) (50.80) (31.75)
KGLX120-316MC Gland nut
KCBGLX160-316MC Complete assembly Series KCBGLX
KCBLX160-316MC Collet body 1 1.69 2.38 1.50 20,000 psi ( 1379 bar)
KCCLX160-316MC Slotted collet (25.40) (42.93) (60.45) (38.10)
KGLX160-316MC Gland nut Standard Parker Autoclave Engineers
collar not included
KCBGLX240-316MC Complete assembly
in complete assembly
KCBLX240-316MC Collet body 1-1/2 2.75 3.63 2.25
KCCLX240-316MC Slotted collet (38.10) (69.85) (92.20) (57.15)
KGLX240-316MC Gland nut

All dimensions for reference only and subject to change.

For prompt service, Parker Autoclave Engineers stocks select products. Consult your local representative.

Offer of Sale
The items described in this document are available for sale by Parker Hannifin Corporation, its subsidiaries or its authorized distributors. Any sale contract entered by Parker will be governed by the provisions
stated in Parker's standard terms and conditions of sale (copy available upon request).

2013 Parker Hannifin Corporation | Autoclave Engineers is a registered trademark of the Parker Hannifin Corporation 02-0124SE January2013

Caution! Do not mix or interchange parts or tubing with those of

other manufacturers. Doing so is unsafe and will void warranty.

Pressures to 15,000 psi (1034 bar)

Since 1945 Parker Autoclave Engineers has designed

and built premium quality valves, fittings and tubing.
This commitment to engineering and manufacturing
excellence has earned Parker Autoclave Engineers a
reputation for reliable, efficient product performance.
Parker Autoclave Engineers has long been established
as the world leader in high pressure fluid handling
components for the chemical/petrochemical,
research, and oil and gas industries.

QS Medium Pressure Fittings and Tubing:

Available sizes are 1/4, 3/8, 9/16, 3/4 and 1.
Fittings and tubing manufactured from high strength
stainless steel.
Molybdenum disulfide-coated gland nuts to prevent galling.
Gland nut positioning mark for assembly.
Single-ferrule compression sleeve.

Fittings and Tubing - QS Series

Connection weep holes for safety and leak detection.
Fast easy make-up of connection.
Operating Temperatures from 0F (-17.8C) to 650F (343C).
1" QS fitting bodies are 2507 Super Duplex standard.

The Medium Pressure QS Series uses Parker Autoclave Engineers' Quick Set compression sleeve
design. This single-ferrule compression sleeve connection delivers fast, easy make-up and reli-
able bubble-tight performance in liquid or gas service.
Medium Pressure

www.autoclave.com
2
Fittings and Tubing - QS Series
Pressures to 15,000 psi (1034 bar)
Parker Autoclave Engineers Medium Pressure QS Fittings are
designed for use with QS Series valves and medium pressure tub-
ing. These fittings feature improved compression connections with
larger orifices for excellent flow capabilities. Parker Autoclave
Engineers fittings and components are manufactured of high
strength stainless steel.

Connection Components
All Parker Autoclave Engineers valves and fittings are supplied complete with appropriate glands and sleeves. To order these
components separately, use order numbers listed. When using plug, sleeve is not required.

Gland Sleeve Plug

QSG ( ) QSS ( ) QSP ( )

Add tube size ( ) Example: To ensure proper fit use Parker Autoclave Engineers tubing.
1/4 - 40 1/4 Gland - QSG 40 For mounting hole option add suffix PM to catalog number.
3/8 - 60 Consult factory for mounting hole dimensions.
9/16 - 90
3/4 - 120
1" - 160

Outside Pressure Dimensions - inches (mm)

Catalog Connection Minimum Block Fitting
Diameter Rating Opening A B C D E F G Thickness
Number Type Pattern
Tube psi (bar)* Typical Thickness

Elbow
QSL4400 QS250 1/4 15,000 0.16 1.38 2.00 0.52 0.63 1.00 1.00 0.75
(6.35) (1034.20) (3.99) (34.93) (50.80) (13.23) (15.88) (25.40) (25.40) (19.05)
QSL6600 QS375 3/8 15,000 0.25 1.50 2.00 0.55 0.75 1.00 1.00 0.81
(9.53) (1034.20) (6.35) (38.10) (50.80) (14.00) (19.05) (25.40) (25.40) (20.62)
QSL9900 QS562 9/16 15,000 0.36 2.19 3.00 0.82 1.19 1.50 1.50 1.25 See
(14.29) (1034.20) (9.12) (55.58) (76.20) (20.83) (30.18) (38.10) (38.10) (31.75) Figure 1
QSL12 QS750 3/4 15,000 0.52 2.94 4.13 1.04 1.50 2.06 2.06 1.50
(19.05) (1034.20) (13.11) (74.63) (104.78) (26.37) (38.10) (52.40) (52.40) (38.10)
QSL16 QSF1000 1 15,000 0.688 3.5 4.75 1.19 1.75 2.38 2.38 2.00
(25.4) (1034.20) (17.48) (88.90) (120.65) (30.18) (44.45) (60.33) (60.33) (50.80)

*Maximum pressure rating is based on the lowest rating

of any component. For mounting hole option add suffix PM to catalog number.
Actual working pressure may be determined by tubing Consult factory for mounting hole dimensions.
pressure rating, if lower.
Figure 1
All dimensions for reference only and subject to change.
For prompt service, Parker Autoclave Engineers stocks D HEX
select products. Consult your local representative. F
1" QS fitting bodies are 2507 Super Duplex
C

E
A

B
3
Elbow
Outside Pressure Dimensions - inches (mm)
Catalog Connection Minimum Block Fitting
Diameter Rating Opening A B C D E F G Thickness
Number Type Pattern
Tube psi (bar)* Typical Thickness

Tee
QST4440 QS250 1/4 15,000 0.16 1.38 2.00 0.52 0.63 1.00 1.00 0.75
(6.35) (1034.20) (3.99) (34.93) (50.80) (13.23) (15.88) (25.40) (25.40) (19.05)
QST6660 QS375 3/8 15,000 0.25 1.50 2.00 0.55 0.75 1.00 1.00 0.81
(9.53) (1034.20) (6.35) (38.10) (50.80) (14.00) (19.05) (25.40) (25.40) (20.62)
QST9990 QS562 9/16 15,000 0.36 2.19 3.00 0.82 1.19 1.50 1.50 1.25
See
(14.29) (1034.20) (9.12) (55.58) (76.20) (20.83) (30.18) (38.10) (38.10) (31.75) Figure 2
QST12 QS750 3/4 15,000 0.52 2.94 4.13 1.04 1.50 2.06 2.06 1.50
(19.05) (1034.20) (13.11) (74.63) (104.78) (26.37) (38.10) (52.40) (52.40) (38.10)
QST16 QSF1000 1 15,000 0.688 3.50 4.75 1.19 1.75 2.38 2.38 2.00
(25.4) (1034.20) (17.48) (88.90) (120.65) (30.18) (44.45) (60.33) (60.33) (50.80)
Cross
QSX4444 QS250 1/4 15,000 0.16 2.00 2.00 0.52 0.63 1.00 1.00 0.75
(6.35) (1034.20) (3.99) (50.80) (50.80) (13.23) (15.88) (25.40) (25.40) (19.05)
QSX6666 QS375 3/8 15,000 0.25 2.00 2.00 0.55 0.75 1.00 1.00 0.81
(9.53) (1034.20) (6.35) (50.80) (50.80) (14.00) (19.05) (25.40) (25.40) (20.62)
QSX9999 QS562 9/16 15,000 0.36 3.00 3.00 0.82 1.19 1.50 1.50 1.25 See
(14.29) (1034.20) (9.12) (76.20) (76.20) (20.83) (30.18) (38.10) (38.10) (31.75) Figure 3
QSX12 QS750 3/4 15,000 0.52 4.13 4.13 1.04 1.50 2.06 2.06 1.50
(19.05) (1034.20) (13.11) (104.78) (104.78) (26.37) (38.10) (52.40) (52.40) (38.10)
QSX16 QSF1000 1 15,000 0.688 4.75 4.75 1.19 1.75 2.38 2.38 2.00
(25.4) (1034.20) (17.48) (120.65) (104.78) (30.18) (44.45) (60.33) (60.33) (50.80)
For mounting hole option add suffix PM to catalog number. Consult factory for mounting hole dimensions.
1" QS fitting bodies are 2507 Super Duplex

Figure 2 Figure 3
F
D HEX C
F
C E
D
HEX A
E
A

B
B

Tee Cross

Outside Pressure Dimensions - inches (mm)

Catalog Connection Minimum Block Fitting
Diameter Rating Opening A B C D E F G Thickness
Number Type Pattern
Tube psi (bar)* Typical Thickness

Straight Coupling
15F44QQ QS250 1/4 15,000 0.16 0.75 1.63 0.52 0.63 Straight
(6.35) (1034.20) (3.99) (19.05) (41.28) (13.23) (15.88)
15F66QQ QS375 3/8 15,000 0.25 0.81 1.75 0.55 0.75 Straight
(9.53) (1034.20) (6.35) (20.65) (44.45) (14.00) (19.05) See
15F99QQ QS562 9/16 15,000 0.36 1.38 2.75 0.82 1.19 Straight
(14.29) (1034.20) (9.12) (34.93) (69.85) (20.83) (30.18) Figure 4
15F12Q QS750 3/4 15,000 0.52 1.50 3.75 1.04 1.50 Straight
(19.05) (1034.20) (13.11) (38.10) (95.25) (26.37) (38.10)
15F16Q QSF1000 1 15,000 0.688 2.75 4.50 1.19 1.75 Straight
(25.4) (1034.20) (17.48) (69.85) (114.30) (30.23) (44.45)
Bulkhead Coupling
15BF44QQ QS250 1/4 15,000 0.16 0.88 2.00 0.52 0.63 0.63 1.00 0.38
(6.35) (1034.20) (3.99) (22.23) (50.80) (13.23) (15.88) (15.88) (25.40) (9.53)
15BF66QQ QS375 3/8 15,000 0.25 1.06 2.38 0.55 0.75 0.79 1.38 0.38
(9.53) (1034.20) (6.35) (27.00) (60.33) (14.00) (19.05) (19.94) (34.93) (9.53)
15BF99QQ QS562 9/16 15,000 0.36 1.63 2.63 0.82 1.19 0.91 1.75 0.38 See
(14.29) (1034.20) (9.12) (41.40) (66.68) (20.83) (30.18) (22.99) (44.45) (9.53) Figure 5
15BF12Q QS750 3/4 15,000 0.52 1.88 3.50 1.04 1.50 1.50 2.13 0.38
(19.05) (1034.20) (13.11) (47.63) (88.90) (26.37) (38.10) (38.10) (53.98) (9.53)
15BF16Q QSF1000 1 15,000 0.688 2.38 5.00 1.19 1.75 2.00 1.88 0.38
(25.4) (1034.20) (17.48) (60.33) (127.00) (30.23) (44.45) (50.80) (47.63) (9.53)

*Maximum pressure rating is based on the lowest rating of any component. All dimensions for reference only and subject to change. Union Couplings are designed with a removable seat insert
Actual working pressure may be determined by tubing pressure rating, For prompt service, Parker Autoclave Engineers stocks select allowing disassembly and tubing removal without the necessity of
if lower. products. Consult your local representative. loosening other items in a line.
1" QS fitting bodies are 2507 Super Duplex

Distance across flats Figure 4 Figure 5

G MAX
A HEX

D D A
HEX F
HEX
B C
E
B C

Straight Coupling Bulkhead Coupling

4
Medium Pressure Tubing
Pressures to 15,000 psi (1034 bar)

Parker Autoclave Engineers offers a complete selection of austenetic, cold drawn

stainless steel tubing designed to match the performance standards of Parker
Autoclave Engineers valves and fittings. Parker Autoclave Engineers medium pres-
sure tubing is manufactured specifically for high pressure applications requiring
both strength and corrosion resistance. The tubing is furnished in random lengths
between 20 feet (6 meters) and 26.5 feet (8.0 meters). The average is 24 feet (7.3
meters). Medium Pressure Tubing is available in five sizes and a variety of materials.

Inspection and Testing

Parker Autoclave Engineers medium pressure tubing is inspected to assure freedom from seams, laps, fissures or other flaws, as
well as carburization or intergranular carbide precipitation. The outside and inside diameters of the tubing are subject to special
inspection and are controlled within close tolerences to assure proper fit. Sample pieces of tube for each lot are tested to confirm
mechanical properties. Hydrostatic testing is also performed on a statistical basis and is conducted at the working pressure of the
tube. Parker Autoclave Engineers will perform 100% hydrostatic testing at additional cost if desired.

Special Materials Tubing Tolerance

In addition to the type 316/316L and 304/304L stainless Nominal Tubing Size Tolerance/Outside Diameter
steel tubing listed in this section, Parker Autoclave Engineers inches (mm) inches (mm)
has limited stock of hard-to-obtain special tubing materials: 1/4 (6.35) .248/.243 (6.30/6.17)
Monel 400*, Inconel 600*, Inconel 625*, Duplex, Super 3/8 (9.53) .370/.365 (9.40/9.27)
Duplex, Titanium Grade 2*, Nickel 200*, Hastelloy C276* 9/16 (14.27) .557/.552 (14.15/14.02)
(*Trademark names) Some are available in shorter 3/4 (19.05) .745/.740 (18.92/18.80)
lengths only. Please consult factory for stock availability. 1 (25.4) .995/.990 (25.27/25.14)

Catalog Tube Fits Tube Size Inches (mm) Flow Working Pressure psi (bar)*
Number Material Connection Outside Inside Wall Area -425 to 100F 200F 400F 600F
Type Diameter Diameter Thickness in.2 (mm2) -252 to 37.8C 93C 204C 316C

MS15-092** 316SS 20,000 20,000 19,250 18,050

QS250 1/4 0.109 0.070 0.009 (1378.93) (1378.93) (1327.22) (1244.48)
MS15-192** 304SS (6.35) (2.77) (1.78) (5.81) 20,000 18,950 17,200 17,000
(1378.93) (1306.54) (1185.88) (1172.09)
MS15-093** 316SS 20,000 20,000 19,250 18,050
QS375 3/8 0.203 0.086 0.032 (1378.93) (1378.93) (1327.22) (1244.48)
MS15-193** 304SS (9.53) (5.16) (2.18) (20.65) 20,000 20,000 19,250 18,050
(1378.93) (1378.93) (1327.22) (1244.48)
MS15-097 316SS
QS562 9/16 0.359 0.101 0.101 15,000 15,000 14,400 13,650
MS15-194 304SS (14.29) (9.12) (2.57) (65.16) (1034.19) (1034.19) (992.82) (941.12)

MS15-098 316SS QS750 3/4 0.516 0.117 0.209 15,000 15,000 14,400 13,650
(19.05) (13.11) (2.97) (134.84) (1034.19) (1034.19) (992.82) (941.12)

MS15-099 316SS QS1000 1 0.688 0.156 0.371 15,000 15,000 14,400 13,650
(25.4) (17.48) (3.96) (239.35) (1034.16) (1034.16) (992.83) (941.12)

*Maximum pressure rating is based on the lowest rating of any component.

5
Nipples - QS Series
Pressures to 15,000 psi (1034 bar)

For rapid system make-up, Parker Autoclave Engineers supplies pre-assem-

bled nipples in various sizes and lengths for Parker Autoclave QSS valves
and fittings.
Special Lengths
In addition to the standard lengths listed in the table below, nipples are
available in any custom length. Consult factory.
Materials
Catalog numbers in table refer to Type 316 Stainless Steel.

Catalog Numbers Working

Fits Tube Size Pressure
Nipple Length Inches (mm)
Connection Inches (mm) at 100
4.00 6.00 8.00 10.00 12.00 Type psi (bar)
(101.60) (152.40) (203.20) (254.60) (304.80) OD ID

QNA4404-316 QNA4406-316 QNA4408-316 QNA44010-316 QNA44012-316 QS250 1/4 0.109 15,000

(6.35) (2.77) (1034.16)
QNA6604-316 QNA6606-316 QNA6608-316 QNA66010-316 QNA66012-316 QS375 3/8 0.203 15,000
(9.53) (5.16) (1034.16)
QNA9906-316 QNA9908-316 QNA99010-316 QNA99012-316 QS562 9/16 0.359 15,000
(14.29) (9.12) (1034.16)
QNA1208-316 QNA12010-316 QNA12012-316 QS750 3/4 0.516 15,000
(19.05) (13.11) (1034.16)
QNA1608-316 QNA16010-316 QNA16012-316 QS1000 1 0.688 15,000
(25.40) (17.48) (1034.16)

Close Tube Port Connectors

Size Fits Connection Dimension L
Model Inches (mm) Inches (mm)
Type

QTS4403.25 1/4 (6.35) QS250 3.25 (82.55)

QTS6603.50 3/8 (9.53) QS375 3.50 (88.90)
L
QTS9905.25 9/16 (14.29) QS562 5.25 (133.35)
QTS1206.375 3/4 (19.05) QS750 6.38 (162.10)

Elbow Tube
Size Fits Connection Dimension H Mean Radius R Inside Radius Ri
Model Type Inches (mm)
Inches (mm) Inches (mm) Inches (mm)

QTE44-90 1/4 (6.35) QS250 3.25 (82.55) 0.563 (14.30) 0.438 (11.13)
QTE66-90 3/8 (9.53) QS375 3.50 (88.90) 0.938 (23.83) 0.75 (19.05)
QTE99-90 9/16 (14.29) QS562 7.50 (19.05) 2.906 (73.82) 2.625 (66.68)
QTE12-90 3/4 (19.05) QS750 10.00 (254.00) 3.875 (98.43) 3.5 (88.9)
QTE16-90 1 (25.40) QS1000 11.50 (292.10) 5.125 (13.30) 4.625 (117.48)

Ri
H Typ.

6
Check Valves - QS Series
Pressures to 15,000 psi (1034 bar)

O-Ring Check Valves Provide unidirectional flow and tight shut-off for liquids and
gases with high reliability. When differential drops below crack-
ing pressure*, valve shuts off. (Not for use as relief valve.)
Materials: 316 Stainless Steel: Body, cover, poppet, cover
gland. 300 Stainless Steel: Spring. Except 1" - see note below.
Standard O-ring: Viton, for operation to 400 F (204C).
Buna-N or PTFE available for 250F (121C) or 400F (204C)
respectively; specify when ordering.
FLOW
*Cracking Pressure: 20 psi (1.38 bar) 30%. Springs for
higher cracking pressures (up to 100 psi (6.89bar)) available
Minimum operating temperature for standard o-ring check valves 0F (-17.8C) on special order for O-ring style check valves only.
Ball Check Valves
Prevent reverse flow where leak-tight shut-off is not
mandatory. When differential drops below cracking pressure,
valve closes. With all-metal components, valve can be used up
to 650F (343C). See Technical Information section for con-
nection temperature limitations. (Not for use as a relief valve.)
Ball and poppet are an integral design to assure positive,
in-line seating without chatter. Poppet is designed essentially
FLOW for axial flow with minimum pressure drop.
Materials: 316 Stainless Steel: Body, cover, cover gland, ball
Minimum operating temperature for standard o-ring check valves 0F (-17.8C) poppet. 300 Series Stainless Steel: Spring. Except 1" - see note
below.
CAUTION: While testing has shown O-Rings to provide satisfactory service life, both cyclic and shelf life may vary widely with differing service conditions, properties of reactants, pressure and temperature cycling
and age of the O-ring. FREQUENT INSPECTIONS SHOULD BE MADE to detect any deterioration, and O-rings replaced as required.

CAUTION: See Tubing section for proper selection of tubing.

Fits Pressure Orifice Dimensions - inches (mm)

Catalog Rated
Connection Rating inches
Number Cv A B C D Hex
Type psi (bar)* (mm) Typical

O-Ring Check Valves

QSO4400 QS250 15,000 0.188 0.15 3.18 2.56 0.44 0.63 0.81
(1034.20) (4.78) (80.77) (65.02) (11.18) (16.00) (20.57)
QSO6600 QS375 15,000 0.312 0.63 3.56 3.00 0.53 0.75 1.00
(1034.20) (7.93) (90.42) (76.20) (13.46) (19.05) (25.40)
QSO9900 QS562 15,000 0.359 2.30 5.21 4.50 0.81 1.19 1.75 See
(1034.20) (9.12) (132.33) (114.30) (20.57) (30.18) (44.45) Figure 1
QSO12 QS750 15,000 0.516 4.70 6.40 5.50 1.03 1.50 1.88
(1034.20) (13.11) (162.56) (139.70) (26.16) (38.10) (47.75)
QSO16 QSF1000 15,000 0.688 14.00 8.92 7.52 1.19 1.75 3.00
(1034.20) (17.48) (226.57) (191.01) (30.23) (44.45) (76.20)

Ball Check Valves

QSB4400 QS250 15,000 0.188 0.15 3.18 2.56 0.44 0.63 0.81
(1034.20) (4.78) (80.77) (65.02) (11.18) (16.00) (20.57)
QSB6600 QS375 15,000 0.312 0.63 3.56 3.00 0.53 0.75 1.00
(1034.20) (7.93) (90.42) (76.20) (13.46) (19.05) (25.40)
QSB9900 QS562 15,000 0.359 2.30 5.21 4.50 0.81 1.19 1.75 See
(1034.20) (9.12) (132.33) (114.30) (20.57) (30.18) (44.45) Figure 1
QSB12 QS750 15,000 0.516 4.70 6.40 5.50 1.03 1.50 1.88
(1034.20) (13.11) (162.56) (139.70) (26.16) (38.10) (47.75)
QSB16 QS1000 15,000 0.688 14.00 8.92 7.52 1.19 1.75 3.00
(1034.20) (17.48) (226.57) (191.01) (30.23) (44.45) (76.20)

Distance across flats

Figure 1
Note:
A
All check valves are furnished complete with connection components unless otherwise specified.
B
*Maximum pressure rating is based on the lowest rating of any component.
Actual working pressure may be determined by tubing pressure rating, if lower. HEX D HEX
All dimensions for reference only and subject to change.
For prompt service, Parker Autoclave stocks select products. Consult your local representative.
1" check valve bodies, cover, cover gland and poppet is 2507 Super Duplex standard. C C
7
WARNING
FAILURE, IMPROPER SELECTION OR IMPROPER USE OF THE PRODUCTS AND/OR SYSTEMS DESCRIBED HEREIN OR RELATED ITEMS CAN CAUSE DEATH, PERSONAL INJURY AND PROPERTY DAMAGE.
This document and other information from Parker Hannifin Corporation, its subsidiaries and authorized distributors provide product and/or system options for further investigation by users having technical
expertise. It is important that you analyze all aspects of your application and review the information concerning the product or system in the current product catalog. Due to the variety of operating conditions
and applications for these products or systems, the user, through its own analysis and testing, is solely responsible for making the final selection of the products and systems and assuring that all performance,
safety and warning requirements of the application are met. The products described herein, including without limitation, product features, specifications, designs, availability and pricing, are subject to change by
Parker Hannifin Corporation and its subsidiaries at any time without notice.

Offer of Sale
The items described in this document are available for sale by Parker Hannifin Corporation, its subsidiaries or its authorized distributors. Any sale contract entered by Parker will be governed by the provisions
stated in Parker's standard terms and conditions of sale (copy available upon request).

2013 Parker Hannifin Corporation | Autoclave Engineers is a registered trademark of the Parker Hannifin Corporation 02-1247BE January2013

Caution! Do not mix or interchange parts or tubing with those of

other manufacturers. Doing so is unsafe and will void warranty.

Since 1945 Parker Autoclave Engineers has designed

and built premium quality valves, fittings and tubing.
This commitment to engineering and manufacturing
excellence has earned Parker Autoclave Engineers
a reputation for reliable, efficient product perfor-
mance. Parker Autoclave Engineers has long been
established as the world leader in high pressure fluid
handling components for the chemical/petrochemi-
cal, research, and oil and gas, waterjet, and water-
blast industries.

High Pressure Fittings, Tubing and Nipples Features:

Coned-and-Threaded Connection.
Available sizes are 1/4, 5/16, 3/8, 9/16, and 1.
Fittings manufactured from 316 cold worked or high strength stainless steel.
Tubing is manufactured from dual rated 316/316L and 304/304L cold worked
stainless steel.
Operating Temperatures from -423F (-252C) to 1200F (649C).
Anti-vibration connection components available.
Ultra-high pressure components.
Autofrettaged tubing.
High pressure high cycle tubing.

The high and ulta-high pressure series uses Parker Autoclave Engineers' high pressure con-
nector. This coned-and-threaded connection provides dependable performance in gas or liquid
service.

www.autoclave.com
Pressures to 150,000 psi (10342 bar)

Parker Autoclave Engineers high pressure fittings Series F

and SF are the industry standard for pressures to 150,000
psi (10342 bar). Utilizing Parker Autoclave Engineers high
pressure coned-and-threaded connections, these fittings are
correlated with Series 30SC, 43SC, 30VM, 40VM, 60VM,
100VM, and 150V valves and Parker Autoclave Engineers
high pressure tubing.

Connection Components
All Parker Autoclave Engineers valves and fittings are supplied complete with appropriate glands and collars. To order these components sepa-
rately, use order numbers listed. When using plug, collar is not required.

Gland Collar Plug

AGL ( ) ACL ( ) AP ( )

Add tube size ( ) Example: To ensure proper fit use Parker Autoclave Engineers tubing.
1/4 - 40 9/16 Gland - AGL (90)
5/16 - 50
3/8 - 60 Note: Special material glands may be supplied with four flats in place
9/16 - 90 of standard hex.
1 - 160

Connection Gland Collar Plug Connection Components

Type (Industry Standard)

F250C AGL( ) ACL( ) AP( ) Parker Autoclave Engineers high pressure fittings 1/4, 3/8 and
F375C 9/16 connection components to 60,000 psi (4137 bar).
F562C For use with 30VM, 40VM, 60VM valves and fittings.

F1000C43 CGLX160 CCLX160 43CP160 Parker Autoclave Engineers high pressure 1 connection
components to 43,000 psi (2965 bar) for use with 30SC, 43Y
valves, and fittings.

CGL50 CCL50 CP50 Parker Autoclave Engineers ultra high pressure 5/16
connection components to 150,000 psi ( 10342 bar) for use
with 100VM and 150V valve and fittings.
F312C150
100CGL40 100CCL40 100CP40 Parker Autoclave Engineers 100,000 psi (6895 bar) connection
100CGL60 100CCL60 100CP60 components utilize our 5/16" connection for 1/4" and 3/8"
tubing. (See Note*)

Elbow
CL4400 F250C 1/4 60,000 0.094 1.00 1.50 0.50 0.63 0.62 0.88 0.75
(6.35) (4136.79) (2.39) (25.40) (38.10) (12.70) (15.88) (15.75) (22.35) (19.05)
100CL4400 F312C150 1/4 100,000 0.094 2.12 3.00 0.52 0.75 1.50 1.50 1.38
(6.35) (6894.65) (2.39) (53.85) (76.20) (13.21) (19.05) (38.10) (38.10) (35.05)
CL5500 F312C150 5/16 150,000 0.094 2.12 3.00 0.52 0.75 1.50 1.50 1.38
(7.94) (10341.97) (2.39) (53.85) (76.20) (13.21) (19.05) (38.10) (38.10) (35.05)
CL6600 F375C 3/8 60,000 0.125 1.50 2.00 0.52 0.81 1.00 1.25 1.00
(9.53) (4136.79) (3.18) (38.10) (50.80) (13.21) (20.62) (25.40) (31.75) (25.40) See
100CL6600 F312C150 3/8 100,000 0.094 2.12 3.00 0.52 0.75 1.50 1.50 1.38 Figure 1
(9.53) (6894.65) (2.39) (53.85) (76.20) (13.21) (19.05) (38.10) (38.10) (35.05)
CL9900 F562C 9/16 60,000 0.188 1.88 2.62 0.81 1.19 1.12 1.88 1.50
(14.29) (4136.79) (4.78) (47.75) (66.55) (20.57) (30.23) (28.45) (47.75) (38.10)
40CL9900 F562C40 9/16 40,000 0.250 1.88 2.62 0.81 1.19 1.12 1.88 1.50
(14.29) (2757.86) (6.35) (47.775) (66.55) (20.57) (30.23) (28.45) (47.75) (38.10)
43CL16 F1000C43 1 43,000 0.438 3.00 4.12 0.72 1.38 2.06 2.06 1.75
(25.40) (2964.70) (11.13) (76.20) (104.65) (18.29) (35.05) (52.32) (52.32) (44.45)

Tee
CT4440 F250C 1/4 60,000 0.094 1.25 2.00 0.50 0.63 0.88 1.00 1.00
(6.35) (4136.79) (2.39) (31.75) (50.80) (12.70) (15.88) (22.35) (25.40) (25.40)
100CT4440 F312C150 1/4 100,000 0.094 2.12 3.00 0.52 0.75 1.50 1.50 1.38
(6.35) (6894.65) (2.39) (53.85) (76.20) (13.21) (19.05) (38.10) (38.10) (35.05)
CT5550 F312C150 5/16 150,000 0.094 2.12 3.00 0.52 0.75 1.50 1.50 1.38
(7.94) (10341.97) (2.39) (53.85) (76.20) (13.21) (19.05) (38.10) (38.10) (35.05)
CT6660 F375C 3/8 60,000 0.125 1.56 2.00 0.52 0.81 1.06 1.00 1.00
(9.53) (4136.79) (3.18) (39.62) (50.80) (13.21) (20.62) (26.92) (25.40) (25.40) See
100CT6660 F312C150 3/8 100,000 0.094 2.12 3.00 0.52 0.75 1.50 1.50 1.38 Figure 2
(9.53) (6894.65) (2.39) (53.85) (76.20) (13.21) (19.05) (38.10) (38.10) (35.05)
CT9990 F562C 9/16 60,000 0.188 2.12 2.62 0.81 1.19 1.38 1.31 1.50
(14.29) (4136.79) (4.78) (53.85) (66.55) (20.57) (30.23) (35.05) (33.27) (38.10)
40CT9990 F562C40 9/16 40,000 0.250 2.12 2.62 0.81 1.19 1.38 1.31 1.50
(14.29) (2757.86) (6.35) (53.85) (66.55) (20.57) (30.23) (35.05) (33.27) (38.10)
43CT16 F1000C43 1 43,000 0.438 3.00 4.12 0.72 1.38 2.06 2.06 1.75
(25.40) (2964.70) (11.13) (76.20) (104.65) (18.29) (35.05) (52.32) (52.32) (44.45)

Cross
CX4444 F250C 1/4 60,000 0.094 1.25 2.00 0.50 0.63 0.62 1.00 1.00
(6.35) (4136.79) (2.39) (31.75) (50.80) (12.70) (15.88) (15.75) (25.40) (25.40)
100CX4444 F312C150 1/4 100,000 0.094 3.00 3.00 0.52 0.75 1.50 1.50 1.38
(6.35) (6894.65) (2.39) (76.20) (76.20) (13.21) (19.05) (38.10) (38.10) (35.05)
CX5555 F312C150 5/16 150,000 0.094 3.00 3.00 0.52 0.75 1.50 1.50 1.38
(7.94) (10341.97) (2.39) (76.20) (76.20) (13.21) (19.05) (38.10) (38.10) (35.05)
CX6666 F375C 3/8 60,000 0.125 2.12 2.00 0.52 0.81 1.06 1.00 1.00
(9.53) (4136.79) (3.18) (53.85) (50.80) (13.21) (20.62) (26.92) (25.40) (25.40) See
100CX6666 F312C150 3/8 100,000 0.094 2.12 3.00 0.52 0.75 1.50 1.50 1.38 Figure 3
(9.53) (6894.65) (2.39) (76.20) (76.20) (13.21) (19.05) (38.10) (38.10) (35.05)
CX9999 F562C 9/16 60,000 0.188 2.75 2.62 0.81 1.19 1.38 1.31 1.50
(14.29) (4136.79) (4.78) (69.85) (66.55) (20.57) (30.23) (35.05) (33.27) (38.10)
40CX9999 F562C40 9/16 40,000 0.250 2.75 2.62 0.81 1.19 1.38 1.31 1.50
(14.29) (2757.86) (6.35) (69.85) (66.55) (20.57) (30.23) (35.05) (33.27) (38.10)
43CX16 F1000C43 1 43,000 0.438 4.12 4.12 0.72 1.38 2.06 2.06 1.75
(25.40) (2964.70) (11.13) (104.65) (104.65) (18.29) (35.05) (52.32) (52.32) (44.45)

Figure 1 Figure 2 Figure 3

D HEX F F
F C
C
C
D HEX E
E D
E A HEX
A
A
B
B
B
Elbow Tee Cross

Note: Fittings such as 45 elbows, reducer elbows, and reducer 45 elbows are available upon request. For mounting hole option add suffix PM to catalog number, consult factory for
mounting hole dimensions. Contact your local sales representative for additional information.
All general terms and conditions of sale, including limitations of our liability, apply to all products and services sold. 3
Outside Pressure Dimensions - inches (mm)
Catalog Connection Minimum Block Fitting
Diameter Rating Opening A B C D E F G Thickness
Number Type Pattern
Tube psi (bar)* Typical Hex Thickness

Straight Coupling/Union Coupling

60F4433 F250C 1/4 60,000 0.094 0.75 1.38 0.50 0.63 Straight
60UF4433 (6.35) (4136.79) (2.39) (19.05) (35.05) (12.70) (15.88) Union
100F4433 F312C150 1/4 100,000 0.094 1.12 2.62 0.52 0.75 Straight
100UF4433 (7.94) (10341.97) (2.39) (28.45) (66.55) (13.21) (19.05) Union
150F5533 F312C150 5/16 150,000 0.094 1.12 2.62 0.52 0.75 Straight
150UF5533 (7.94) (10341.97) (2.39) (28.45) (66.55) (13.21) (19.05) Union
60F6633 F375C 3/8 60,000 0.125 1.00 1.75 0.53 0.81 Straight
60UF6633 (9.53) (4136.79) (3.18) (25.40) (44.45) (13.46) (20.62) Union See
100F6633 F312C150 3/8 100,000 0.094 1.12 2.62 0.52 0.75 Straight Figure 4
100UF6633 (9.53) (6894.65) (2.39) (28.45) (66.55) (13.21) (19.05) Union
60F9933 F562C 9/16 60,000 0.188 1.38 2.19 0.81 1.19 Straight
60UF9933 (14.29) (4136.79) (4.78) (35.05) (55.63) (20.57) (30.15) Union
40F9933 F562C40 9/16 40,000 0.250 1.38 2.19 0.81 1.19 Straight
40UF9933 (14.29) (2757.86) (6.35) (35.05) (55.63) (20.57) (30.15) Union
43F16 F1000C43 1 43,000 0.438 1.75 3.50 0.72 1.38 Straight
43UF16 (25.40) (2964.70) (11.13) (44.45) (88.90) (18.29) (35.05) Union

Bulkhead Coupling
60BF4433 F250C 1/4 60,000 0.094 0.94 1.88 0.50 0.63 0.50 1.00 0.38
(6.35) (4136.79) (2.39) (23.88) (47.75) (12.70) (15.88) (12.70) (25.40) (9.65)
100BF4433 F312C150 1/4 100,000 0.094 2.12 3.25 0.52 0.75 1.38 2.00 0.38
(6.35) (6894.65) (2.39) (53.85) (82.55) (13.21) (19.05) (35.05) (50.80) (9.65)
150BF5533 F312C150 5/16 150,000 0.094 2.12 3.25 0.52 0.75 1.38 2.00 0.38
(7.94) (10341.97) (2.39) (53.85) (82.55) (13.21) (19.05) (35.05) (50.80) (9.65)
60BF6633 F375C 3/8 60,000 0.125 1.12 2.38 0.53 0.81 0.78 1.38 0.38
(9.53) (4136.79) (3.18) (28.45) (60.45) (13.46) (20.62) (19.81) (35.05) (9.65) See
100BF6633 F312C150 3/8 100,000 0.094 2.12 3.25 0.52 0.75 1.38 2.00 0.38 Figure 5
(9.53) (6894.65) (2.39) (53.85) (82.55) (13.21) (19.05) (35.05) (50.80) (9.65)
60BF9933 F562C 9/16 60,000 0.188 1.69 2.75 0.81 1.19 1.00 1.88 0.38
(14.29) (4136.79) (4.78) (42.93) (69.85) (20.57) (30.23) (25.40) (47.75) (9.65)
40BF9933 F562C40 9/16 40,000 0.250 1.69 2.75 0.81 1.19 1.00 1.88 0.38
(14.29) (2757.86) (6.35) (42.93) (69.85) (20.57) (30.23) (25.40) (47.75) (9.65)
43BF16 F1000C43 1 43,000 0.438 1.94 3.50 0.72 1.38 1.50 2.13 0.50
(25.40) (2964.70) (11.13) (49.28) (88.90) (18.29) (35.05) (38.10) (54.10) (12.70)

*Maximum pressure rating is based on the lowest rating of any component. Union Couplings are designed with a removable seat insert
Actual working pressure may be determined by tubing pressure rating, if lower. allowing disassembly and tubing removal without the necessity of
loosening other items in a line.
All dimensions for reference only and subject to change.
For prompt service, Parker Autoclave Engineers stocks select products. Consult your local representative.

Figure 4 Figure 5

G MAX
A HEX

D F A D HEX
HEX
B C E
B C

(A=Panel hole drill size)

Straight Coupling / Union Coupling Bulkhead Coupling

4 All general terms and conditions of sale, including limitations of our liability, apply to all products and services sold.
High Pressure Tubing
Pressures to 150,000 psi (10342 bar)

Parker Autoclave Engineers offers a complete selection of austenetic, cold drawn

stainless steel tubing designed to match the performance standards of Parker
Autoclave valves and fittings. Parker Autoclave high pressure tubing is manufactured
specifically for high pressure applications requiring both strength and corrosion re-
sistance. The tubing is furnished in random lengths between 20 feet (6 meters) and
26.5 feet (8.0 meters). The average is 24 feet (7.3 meters). High pressure tubing is
available in five sizes and a variety of materials. Special longer lengths are available.
Consult factory.
Inspection and Testing
Parker Autoclave Engineers high pressure tubing is inspected to assure freedom from seams, laps, fissures or other flaws, as
well as carburization or intergranular carbide precipitation. The outside and inside diameters of the tubing are controlled within
close tolerences. Sample pieces of tubing for each lot are tested to confirm mechanical properties. Hydrostatic testing is also
performed on a statistical basis and is conducted at the working pressure of the tube. Parker Autoclave will perform 100%
hydrostatic testing at additional cost if desired.
Special Materials Tubing Tolerance
In addition to the type 316/316L and 304/304L stainless steel Nominal Tubing Size Tolerance/Outside Diameter
tubing listed in this section, Parker Autoclave has limited stock inches (mm) inches (mm)
of hard-to-obtain shorter lengths of the following tubing mate-
rials in some sizes: 1/4 (6.35) .248/.243 (6.30/6.17)
Monel 400*, Inconel 600*, Inconel 625*, Duplex, Super 5/16 (7.94) .310/.306 (7.87/7.77)
Duplex, Titanium Grade 2*, Nickel 200*, Hastelloy C276*
3/8 (9.53) .370/.365 (9.40/9.27)
(*Trademark names) Some are available in shorter
lengths only. Please consult factory for stock availability. 9/16 (14.29) .557/.552 (14.15/14.02)
1 (25.40) .995/.990 (25.27/25.14)

MS15-202 Stainless ......(See note 3) 100,000 100,000 96,210 90,368 84,420

(6894.64) (6894.64) (6633.24) (6230.55) (5820.46)
MS15-081 316SS F250C 1/4 0.083 0.083 0.005 60,000 60,000 57,750 54,250 50,700
(6.35) (2.11) (2.11) (3.23) (4136.79) (4136.79) (3981.66) (3740.35) (3495.59)
MS15-182 304SS 60,000 56,800 51,650 50,700 48,450
(4136.79) (3916.16) (3561.09) (3495.59) (3340.46)
MS15-082 316SS F312C150 5/16 0.062 0.125 0.003 150,000 150,000 144,400 136,350 126,750
(7.94) (1.57) (3.18) (1.94) (10341.97) (10341.97) (9955.87) (9400.85) (8738.97)
MS15-201 Stainless.......(See note 3) 100,000 100,000 96,210 90,368 84,420
(6894.64) (6894.64) (6633.24) (6230.55) (5820.46)
MS15-087 316SS F375C 3/8 0.125 0.125 0.012 60,000 60,000 57,750 54,250 50,700
(9.53) (3.18) (3.18) (7.74) (4136.79) (4136.79) (3981.66) (3740.35) (3495.59)
MS15-183 304SS 60,000 56,800 51,650 50,700 48,450
(4136.79) (3916.16) (3561.09) (3495.59) (3340.46)
MS15-210 Stainless 100,000 100,000 96,210 90,368 84,420
(6894.64) (6894.64) (6633.24) (6230.55) (5820.46)
MS15-083 316SS F562C 9/16 0.188 0.187 0.028 60,000 60,000 57,750 54,250 50,700
(14.29) (4.78) (4.75) (18.06) (4136.79) (4136.79) (3981.66) (3740.35) (3495.59)
MS15-185 304SS 60,000 56,800 51,650 50,700 48,450
(4136.79) (3916.16) (3561.09) (3495.59) (3340.46)
MS15-090 316SS F562C40 9/16 0.250 0.156 0.048 40,000 40,000 38,500 36,100 33,800
(14.29) (6.35) (3.96) (30.97) (2757.86) (2757.86) (2654.44) (2488.96) (2330.39)
MS15-209 Stainless F562C40-312 9/16 0.312 0.125 0.076 40,000 40,000 38,500 36,100 33,800
(14.29) (7.92) (3.18) (49.03) (2757.86) (2757.86) (2654.44) (2488.97) (2330.39)
MS15-211 316SS F1000C43 1 0.438 0.281 0.151 43,000 43,000 43,000 41,380 36,330
(25.40) (11.13) (7.14) (97.42) (2964.70) (2964.70) (2964.70) (2853.01) (2504.83)

Note:
1. Autofrettaged tubing available (see technical Information section: Pressure Cycling *Maximum pressure rating is based on the lowest rating of any component.
for Autofrettage information) Actual working pressure may be determined by tubing pressure rating, if lower.
2. For HighPressure, High Cycle (HPHC) tubing, MS15-201, MS15-202, MS15-209,
All dimensions for reference only and subject to change.
and MS15-210 are available. (See Technical Information section: Pressure Cycling
For prompt service, Parker Autoclave Engineers stocks select products. Consult your local representative.
for additional information)
3. For 100,000 psi rating use F312C150 connection

All general terms and conditions of sale, including limitations of our liability, apply to all products and services sold. 5
High Pressure Coned-and-Threaded Nipples
Pressures to 150,000 psi (10342 bar)

For rapid system make-up, Parker Autoclave Engineers supplies

pre-cut, coned-and-threaded nipples in various sizes and
lengths for Parker Autoclave high pressure valves and fittings.

Special lengths
In addition to the standard lengths listed in the table below,
nipples are available in any custom length. Consult factory.

Materials**
Catalog numbers in table refer to Type 316 Stainless steel.
Note: Most items available in 304SS. Consult factory for availability.

Material in table is 316 Stainless steel

Catalog Number Working*

Fits Tube Size inches
Nipple Length In (mm) Pressure
Connection (mm)
2.75 3.00 4.00 6.00 8.00 10.00 12.00 at 100F (37.8C)
Type
(69.85) (76.20) (101.60) (152.40) (203.20) (254.00) (304.80) O.D. I.D. psi (bar)

CN4402-316 CN4403-316 CN4404-316 CN4406-316 CN4408-316 CN44010-316 CN44012-316 F250C 1/4 0.083 60,000
(6.35) (2.11) (4136.79)

CN5504-316 CN5506-316 CN5508-316 CN55010-316 CN55012-316 F312C150 5/16 0.062 150,000

(7.94) (1.57) (10341.97)

CN6603-316 CN6604-316 CN6606-316 CN6608-316 CN66010-316 CN66012-316 F375C 3/8 0.125 60,000
(9.53) (3.18) (4136.79)

CN9904-316 CN9906-316 CN9908-316 CN99010-316 CN99012-316 F562C 9/16 0.188 60,000

(14.29) (4.78) (4136.79)

40CN9904-316 40CN9906-316 40CN9908-316 40CN99010-316 40CN99012-316 F562C40 9/16 0.250 40,000

(14.29) (6.35) (2757.86)

43CN1606-316 43CN1608-316 43CN16010-316 43CN16012-316 F1000C43 1 0.438 43,000

(25.40) (12.40) (2964.70)

Note:
See High pressure tubing section for pressure ratings at various temperatures.

*Maximum pressure rating is based on the lowest rating of any component.

6 All general terms and conditions of sale, including limitations of our liability, apply to all products and services sold.
High Pressure Check Valves
Pressures to 60,000 psi (4137 bar)

O-Ring Check Valves

Provides unidirectional flow and tight shut-off for liquids and
gas with high reliability. When differential drops below crack-
ing pressure*, valve shuts off. (Not for use as relief valve.)
Materials: 316 Stainless Steel: body, cover, poppet, cover
gland. 300 Series Stainless Steel: spring. Standard O-ring:
Viton, for operation to 400 F (204C). Buna-N or PTFE
available for 250F (121C) or 400F (204C) respectively;
FLOW
specify when ordering.
*Cracking Pressure: 20 psi (1.38 bar) 30%. Springs for
Minimum operating temperature for standard o-ring check higher cracking pressures (up to 100 psi (6.89 bar) available
valves 0F (-17.8C). on special order for O-ring style check valves only.
For low temperature option to -423F (-252C) add suffix
LTTO (Low temperature spring & PTFE o-ring).

Ball Type Excess Flow Valves Protects pressure gauges and pressure instrumentation from
surges in flow or sudden venting in the event of line failure.
Materials: 316 Stainless Steel: body, cover, sleeve, cover
gland. 300 Series Stainless Steel: ball.
Vertical Installation: Since this type of check valve employs a
non-spring loaded ball, valve MUST be installed in VERTICAL
position with arrow on valve body pointing UP. (cover gland up).
Resetting Valve: Equalize the pressure across the ball. The
ball will drop and reset automatically.
(Vertical Installation Only)

CAUTION: While testing has shown O-Rings to provide satisfactory service life, both cyclic and shelf
life may vary widely with differing service conditions, properties of reactants, pressure and temperature
cycling and age of the O-ring. FREQUENT INSPECTIONS SHOULD BE MADE to detect any deterioration,
FLOW

and O-rings replaced as required.

NOTE: For optional material see Needle Valve Options section.

All general terms and conditions of sale, including limitations of our liability, apply to all products and services sold.
7
High Pressure Check Valves

Fits Pressure Orifice Dimensions - inches (mm)

Catalog Rated
Connection Rating inches
Number Cv A B C D Hex
Type psi (bar)* (mm) Typical

O-Ring Check Valves

CKO4400 F250C 60,000 0.094 0.15 3.38 2.50 0.50 0.63 1.18
(4136.79) (2.39) (85.85) (63.50) (12.70) (16.00) (29.97)
CKO6600 F375C 60,000 0.125 0.28 3.75 2.62 0.53 0.75 1.18
(4136.79) (3.18) (95.25) (66.55) (13.46) (19.05) (29.97)
CKO9900 F562C 60,000 0.187 0.63 4.62 3.38 0.81 1.12 1.50
(4136.79) (4.75) (117.35) (85.85) (20.57) (28.45) (38.10)
40CKO9900 F562C40 40,000 0.250 0.78 4.64 3.38 0.72 1.19 1.50
(2757.85) (6.35) (117.86) (85.73) (18.29) (30.23) (38.10)
43CKO16 F1000C43 43,000 0.438 4.3 6.54 5.63 .72 1.38 1.88
(2964.70) (11.13) (166.11) (143.00) (18.29) (35.05) (47.76)

Ball Check Valves

CB4401 F250C 60,000 0.094 0.15 3.38 2.50 0.50 0.63 1.18
(4136.79) (2.39) (85.85) (63.50) (12.70) (16.00) (29.97)
100CB4401+ F312C150 100,000 0.0094 0.11 4.61 3.50 0.52 1.75 .75
(6894.65) (2.39) (117.09) (88.9) (13.21) (44.50) (19.05)
100CB5501+ F312C150 100,000 0.0094 0.11 4.61 3.50 .52 1.75 .75
(6894.65) (2.39) (117.09) (88.9) (13.21) (44.50) (19.05)
CB6601 F375C 60,000 0.125 0.28 3.75 2.62 0.53 0.75 1.18
(4136.79) (3.18) (95.25) (66.55) (13.46) (19.05) (29.97)
100CB6601+ F312C150 100,000 0.0094 0.11 4.61 3.50 .52 1.75 .75
(6894.65) (2.39) (117.09) (88.9) (13.21) (44.50) (19.05)
CB9901 F562C 60,000 0.187 0.63 4.62 3.38 0.81 1.12 1.50
(4136.79) (4.75) (117.35) (85.85) (20.57) (28.45) (38.10)
43CB16 F1000C43 43,000 0.438 4.3 6.54 5.63 .72 1.38 1.88
(2964.70) (11.13) (166.11) (143.00) (18.29) (35.05) (47.76)
+
Body material is 15-5PH

Ball Type Excess Flow Valves

CK4402 F250C 60,000 0.094 3.38 2.50 0.50 0.63 1.18
(4136.79) (2.39) (85.85) (63.50) (12.70) (16.00) (29.97)
CK6602 F375C 60,000 0.125 3.75 2.62 0.53 0.75 1.18
(4136.79) (3.18) (95.25) (66.55) (13.46) (19.05) (29.97)
CK9902 F562C 60,000 0.187 4.62 3.38 0.81 1.12 1.50
(4136.79) (4.75) (117.35) (85.85) (20.57) (28.45) (38.10)

*Maximum pressure rating is based on the lowest rating of any component.

Distance across flats
Actual working pressure may be determined by tubing pressure rating, if lower.
All dimensions for reference only and subject to change.
For prompt service, Parker Autoclave Engineers stocks select products. Consult your local representative.

Figure 1

A
B

HEX D HEX

C C

8 All general terms and conditions of sale, including limitations of our liability, apply to all products and services sold.
High Pressure Line Filters
Pressures to 60,000 psi (4137 bar)

Dual-Disc Line Filters

Parker Autoclave Engineers Dual-Disc Line Filters are utilized
in numerous industrial, chemical processing, aerospace, nu-
clear and other applications. With the dual-disc design, large
contaminant particles are trapped by the upstream filter ele-
ment before they can reach and clog the smaller micron-size
downstream element. Filter elements can be easily replaced.
Materials: 316 Stainless Steel: body, cover, cover gland.
FLOW 300 Series Stainless Steel: filter elements.
Filter Elements: Downstream/upstream micron size 35/65 is
standard. 5/10 or 10/35 also available when specified. Other
element combinations available on special order.

Parker Autoclave Engineers High Flow Cup-Type Line Filters

Cup-Type Line Filters are recommended in high pressure systems requiring both
high flow rates and maximum filter surface area. Widely
used in the industrial and chemical processing fields, the cup
design offers as much as six times the effective filter area as
compared to disc-type units. In addition, the filter elements
can be quickly and easily replaced.
Materials: 316 Stainless Steel: body, cover, cover gland.
300 Series Stainless Steel: filter element.
FLOW Filter Elements: 300 Series Stainless Steel sintered cup.
Standard elements available in choice of 5, 35 or 65 micron
sizes. NOTE: Filter ratings are nominal.

NOTE 1: All filters furnished complete with connection components unless specified without.
All dimensions for reference only and subject to change.

For optional materials, see Needle Valve Options section

NOTE 3: Special material filters may be supplied with four flats in place of standard hex.

NOTE 4: Pressure differential not to exceed 1,000 psi (69 bar) in a flowing condition.

NOTE 5: Larger micron size filter element is installed on the upstream (inlet) side.

Dual-Disc Line Filters

CLF4400 60,000 0.094 35/65 0.07 4.75 3.00 0.50 .63 1.12
CLF4400-5/10 (4136.79) (2.39) 5/10 F250C (45.16) (20.65) (76.20) (12.70) (16.00) (28.45)
CLF4400-10/35 10/35
CLF6600 60,000 0.125 35/65 0.07 5.12 3.00 0.53 .75 1.12
CLF6600-5/10 (4136.79) (3.18) 5/10 F375C (45.16) (130.16) (76.20) (13.46) (19.05) (28.45)
CLF6600-10/35 10/35
CLF9900 60,000 0.187 35/65 0.15 5.81 3.38 0.81 1.12 1.38
CLF9900-5/10 (4136.79) (4.75) 5/10 F562C (96.77) (147.57) (85.85) (20.58) (28.45) (35.05)
CLF9900-10/35 10/35

Cup-Type Line Filters

CF4-5 60,000 0.094 5 1.29 4.19 3.38 0.50 .63 1.38
CF4-35 (4136.79) (2.39) 35 F250C (832.26) (106.42) (85.85) (12.70) (16.00) (35.05)
CF4-65 65
CF6-5 60,000 0.125 5 1.29 4.62 3.62 0.53 .75 1.38
CF6-35 (4136.79) (3.18) 35 F375C (832.26) (117.35) (91.94) (13.46) (19.05) (35.05
CF6-65 65
CF9-5 60,000 0.187 5 1.29 5.25 4.06 0.81 1.12 1.50
CF9-35 (4136.79) (4.75) 35 F562C (832.26) (133.35) (103.12) (20.58) (28.45) (38.10)
CF9-65 65

Note:
**Other micron sizes available on special order. Change last digits of the catalog number accordingly.
For optional materials, see Needle Valve Options section.

*Maximum pressure rating is based on the lowest rating of any component.

Dual-Disc Line Filters

A
D
B HEX
C C

HEX

Cup-Type Line Filters

A
B

HEX D HEX

C C

10 All general terms and conditions of sale, including limitations of our liability, apply to all products and services sold.
High Anti-Vibration Collet Gland Assembly
Pressures to 150,000 psi (10342 bar)

Series KCGL Sizes to 9/16 (14.29 mm)

For extreme conditions of vibration and/or shock in tubing
systems, such as locating valve or fitting on an unsup-
ported line near a compressor, Parker Autoclave Engineers
Gland Nut
coned-and-threaded connections are offered with the
Anti-Vibration Collet Gland Assemblies. Completely inter- Slotted Collet
changeable with standard Parker Autoclave Engineers high
pressure connections, the Collet Gland Assemblies provide
Collet grips tubing
equally effective pressure handling capability. here for
anti-vibration
support
In standard connection systems, the bending stresses
on the threaded area of the tubing imposed by exces-
sive vibration or movement may cause premature fatigue Collar
failure of the tubing at the back of the thread. By moving
the stress concentration back to the unthreaded part of
the tubing and providing a wedge-type gripping action, Valve or fitting body
the Parker Autoclave Engineers anti-vibration collet gland Line contact
seating
assembly strengthens the entire structure. With stress
concentration reduced and overall stress level maintained
well below the endurance limit of the material, the result is Series KCGL
virtually unlimited vibrational fatigue life.
Pressures to 60,000 psi (4137 bar)
A less complex and more economical design than other
vibration-resistant connections, the Collet Gland Assembly Note: 1) To order components with anti-vibration assemblies add -K
utilizes the same coned-and-threaded features of Parker to catalog numbers.
Autoclave Engineers high pressure connections. In Series 2) Special material assemblies may be supplied with four flats
KCGL the gland nut is recessed to accommodate a tapered, in place of standard hex.
slotted collet that grips the tubing at a point behind the
threaded area of the tubing.The design provides a slight
difference in angles between the collet and the correspond-
ing taper of the gland nut. As the nut is tightened, it acts
to wedge the tapered end of the collet into a gripping
engagement with the tubing and, at the same time, forces
the collar and tubing assembly into line contact with the
connection seat.
Outside Dimensions - inches (mm)
Catalog Diameter
Number Part Tubing Size A B Hex
in. (mm) Hex
KCGL40-316 Complete assembly
KCL40-316 Slotted collet 1/4 0.50 0.81 0.62
A
KGL40-316 Gland nut (6.35) (12.70) (20.58) (15.75)
B
KCGL60-316 Complete assembly
KCL60-316 Slotted collet 3/8 0.62 1.12 0.81
KGL60-316 Gland nut (9.53) (15.75) (28.45) (20.58)

KCGL90-316 Complete assembly

KCL90-316 Slotted collet 9/16 1.00 1.50 1.19
KGL90-316 Gland nut (14.29) (25.40) (38.10) (30.23)

Series KCGL
60,000 psi (4137 bar)

Standard Parker Autoclave Engineers collar not

included in complete assembly

All dimensions for reference only and subject to change.

For prompt service, Parker Autoclave stocks select products. Consult your local representative.

All general terms and conditions of sale, including limitations of our liability, apply to all products and services sold. 11
Series KCBGLX - Sizes to 1 (25.40)
Series KCBGL - Sizes to 1/4" (6.35), 5/16" (7.94), 3/8" (9.53) Gland Nut Slotted Collet

For extreme conditions of vibration and/or shock in

tubing systems, such as locating a valve or fitting on Collet grips tubing
here for
Collet Body

an unsupported line near a compressor, Autoclave coned-and- anti-vibration

support
threaded connections are offered with the Anti-Vibration Collet Valve or fitting body
Gland Assemblies. A less complex and more economical
design than other vibration-resistant connections, the collet Collar
gland assembly utilizes the same coned-and-threaded features
of Autoclave high pressure connections.
Series KCBGLX and KCBGL extends the gland nut to provide
room for the tapered, slotted collet and collet nut. The design Line contact
provides a slight difference in angles between the collet seating

and the corresponding taper of the gland nut. As the nut is

tightened, it acts to wedge the tapered end of the collet into a Series KCBGLX - Pressures to 43,000 psi (2965 bar)
gripping engagement with the tubing. Series KCBGL - Pressures to 150,000 psi (10342 bar)

Materials Note: 1) To order components with anti-vibration assemblies add -K

Type 316 stainless steel with bonded dry film (316MC) moly to catalog numbers.
lubricant. 2) Special material assemblies may be supplied with four flats
in place of standard hex.

Outside Diameter Dimensions - inches (mm)

Catalog Part
Number Tubing Size in. (mm) A B Hex Hex
KCBGLX160-316MC Complete assembly

KCBLX160-316MC Collet body 1.0 1.69 2.38 1.50

KCCLX160-316MC Slotted collet (25.40) (25.40) (60.45) (38.10)
KGLX160-316MC Gland nut
A
B
KCBGL40-316MC Complete assembly

KCBL40-316MC Collet body .250 1.38 1.88 .75

KCCLX40-316MC Slotted collet (6.35) (34.92) (47.62) (19.05)
KGL40-316MC Gland nut

KCBGL50-316MC Complete assembly

KCBL50-316MC Collet body .312 1.38 1.88 .75

KCCL50-316MC Slotted collet (7.94) (34.92) (47.62) (19.05)
KGL50-316MC Gland nut

KCBGL60-316MC Complete assembly

Series KCBGLX - 43,000 psi (2965 bar)
Collet body Series KCBGL - 150,000 psi (10342 bar)
KCBL60-316MC .375 1.38 1.88 .75
KCCLX60-316MC Slotted collet (9.53) (34.92) (47.62) (19.05) Standard Autoclave Engineers collar not
included in complete assembly
KGL60-316MC Gland nut

All dimensions for reference only and subject to change.

KCBGL anti-vibes are for 100,000 and 150,000 psi components.
For prompt service, Parker Autoclave stocks select products. Consult your local representative.

Offer of Sale
The items described in this document are available for sale by Parker Hannifin Corporation, its subsidiaries or its authorized distributors. Any sale contract entered by Parker will be governed by the provisions
stated in Parker's standard terms and conditions of sale (copy available upon request).

2013 Parker Hannifin Corporation | Autoclave Engineers is a registered trademark of the Parker Hannifin Corporation 02-0125SE January2013

Caution! Do not mix or interchange parts or tubing with those of

other manufacturers. Doing so is unsafe and will void warranty.

Since 1945 Parker Autoclave Engineers has designed

and built premium quality valves, fittings and tubing.
This commitment to engineering and manufacturing
excellence has earned Parker Autoclave Engineers
a reputation for reliable, efficient product perfor-
mance. Parker Autoclave Engineers has long been
established as the world leader in high pressure fluid
handling components for the chemical/petrochemi-
cal, research and oil and gas industries.

Pipe Fittings, Tubing and Nipples Features:

Available sizes are 1/4", 3/8", 1/2", 3/4" and 1"

Fittings and tubing manufactured from cold worked
316 stainless steel.
Operating Temperatures from -423F (-252C) to 400F (204C).

Fittings ,Tubing & Nipples - P Series

www.autoclave.com
Pipe Fittings
Pressures to 15,000 psi (1034 bar)

Parker Autoclave Engineers pipe fittings, P Series, are de-

signed for liquid and gas applications. Available from 1/4"
to 1" NPT to 15,000 psi and temperatures to 400F (204C)

Pressure Minimum
Dimensions - inches (mm)
Block
Catalog Connection Fitting
Rating Opening A B C D Thickness
Number Type Pattern
psi (bar)*

Pipe Elbow
PL4400 1/4" NPT 15,000 0.42 1.13 1.50 0.75 0.75 0.75
(1034.20) (10.67) (28.58) (38.10) (19.05) (19.05) (19.05)
PL6600 3/8" NPT 15,000 0.56 1.50 2.00 1.00 1.00 1.00
(1034.20) (14.22) (38.10) (50.80) (25.40) (25.40) (25.40)
PL8800 1/2" NPT 15,000 0.69 1.88 3.00 1.25 1.50 1.25 See
(1034.20) (17.53) (47.75) (76.20) (31.75) (38.10) (31.75) Figure 1
PL12 3/4" NPT 10,000 0.89 2.18 3.00 1.50 1.50 1.38
(689.46) (22.61) (55.37) (76.20) (38.10) (38.10) (35.05)
PL16 1" NPT 10,000 1.13 2.50 4.12 1.56 2.06 1.75
(689.46) (28.58) (63.50) (104.65) (39.67) (52.37) (44.45)

Pipe Tee
PT4440 1/4" NPT 15,000 0.42 1.13 1.50 0.75 0.75 0.75
(1034.20) (10.67) (28.58) (38.10) (19.05) (19.05) (19.05)
PT6660 3/8" NPT 15,000 0.56 1.50 2.00 1.00 1.00 1.00
(1034.20) (14.22) (38.10) (50.80) (25.40) (25.40) (25.40)
PT8880 1/2" NPT 15,000 0.69 1.88 3.00 1.25 1.50 1.25 See
(1034.20) (17.53) (47.75) (76.20) (31.75) (38.10) (31.75) Figure 2
PT12 3/4" NPT 10,000 0.89 2.18 3.00 1.50 1.50 1.38
(689.46) (22.61) (55.37) (76.20) (38.10) (38.10) (35.05)
PT16 1" NPT 10,000 1.13 2.50 4.12 1.56 2.06 1.75
(689.46) (28.58) (63.50) (104.65) (39.67) (52.37) (44.45)

Pipe Cross
PX4444 1/4" NPT 15,000 0.42 1.50 1.50 0.75 0.75 0.75
(1034.20) (10.67) (38.10) (38.10) (19.05) (19.05) (19.05)
PX6666 3/8" NPT 15,000 0.56 2.00 2.00 1.00 1.00 1.00
(1034.20) (14.22) (50.80) (50.80) (25.40) (25.40) (25.40)
PX8888 1/2" NPT 15,000 0.69 2.50 3.00 1.25 1.50 1.25 See
(1034.20) (17.53) (63.50) (76.20) (31.75) (38.10) (31.75) Figure 3
PX12 3/4" NPT 10,000 0.89 3.00 3.00 1.50 1.50 1.38
(689.46) (22.61) (76.20) (76.20) (38.10) (38.10) (35.05)
PX16 1" NPT 10,000 1.13 3.13 4.12 1.56 2.06 1.75
(689.46) (28.58) (79.38) (104.65) (39.67) (52.37) Figure
(44.45)3
*Maximum pressure rating is based on the lowest rating of any component. For prompt service, Parker Autoclave Engineers stocks select products. Consult your local representative.
Actual working pressure may be determined by pipe pressure rating, if lower. For mounting hole option add suffix PM to catalog number. Consult factory for
All dimensions for reference only and subject to change. mounting hole dimensions.

Figure 1 Figure 2 Figure 3

D D
D

C C
C A A
A

B
B B
Elbow Tee Cross

2 All general terms and conditions of sale, including limitations of our liability, apply to all products and services sold.
Pressure Minimum
Dimensions - in.(mm)
Catalog Connection Fitting
Rating Opening A B
Number Type Pattern
psi (bar)*

Pipe Coupling
15F4488 1/4" NPT 15,000 0.42 .075 1.50
(1034.20) (10.67) (19.05) (38.10)
15F6688 3/8" NPT 15,000 0.56 1.00 1.63
(1034.20) (14.22) (25.40) (41.28)
15F8888 1/2" NPT 15,000 0.69 1.19 2.00 See
(1034.20) (17.53) (30.23) (50.80) Figure 4
10F121288 3/4" NPT 10,000 0.89 1.38 2.75
(689.46) (22.61) (30.06) (69.90)
10F161688 1" NPT 10,000 1.13 1.75 2.50
(689.46) (28.58) (44.50) (63.50)

Pressure Minimum
Dimensions - inches (mm)
E
Catalog Connection Fitting
Rating Opening A B C D Max
Number Type Pattern
psi (bar)*

Pipe Bulkhead Coupling

15BF4488 1/4" NPT 15,000 0.42 0.94 2.00 1.00 0.63 0.38
(1034.20) (10.67) (23.80) (50.80) (25.40) (15.75) (9.53)
15BF6688 3/8" NPT 15,000 0.56 1.13 2.38 1.38 0.79 0.38
(1034.20) (14.22) (28.60) (60.50) (35.05) (20.07) (9.53)
15BF8888 1/2" NPT 15,000 0.69 1.68 2.63 1.88 0.91 0.38 See
(1034.20) (17.53) (42.67) (66.80) (47.80) (23.11) (9.53) Figure 5
10BF121288 3/4" NPT 10,000 0.89 1.68 2.63 1.88 0.91 0.38
(689.46) (22.61) (42.67) (66.80) (47.80) (23.11) (9.53)
10BF161688 1" NPT 10,000 1.13 1.94 3.50 1.87+ 1.50 0.38
(689.46) (28.58) (49.28) (88.90) (47.50) (38.10) (9.53)

NOTE: NPT (Pipe) Connections:

Pressure Dimensions - in.(mm)
- NPT threads must be sealed using a high quality PTFE tape and/or
Catalog Connection Fitting
Rating A B paste product. Refer to thread sealant manufacturer's instructions
Number Type Pattern
psi (bar)* on how to apply thread sealant.
- Sealing performance may vary based on many factors such as
Pipe Plugs pressure, temperature, media, thread quality, thread material,
PP40 1/4" NPT 15,000 0.63 1.12 proper thread engagement and proper use of thread sealant.
(1034.20) (16.00) (28.45) - Customer should limit the number of times an NPT fitting is
PP60 3/8" NPT 15,000 0.75 1.12 assembled and disassembled because thread deformation during
(1034.20) (19.05) (28.45) assembly will result in deteriorating seal quality over time. When
PP80 1/2" NPT 15,000 1.00 1.50 See
using only PTFE tape, consider using thread lubrication to prevent
(1034.20) (25.40) (38.10) Figure 6
galling of mating parts.
PP120 3/4" NPT 10,000 1.38 1.50
(689.46) (35.05) (38.10)
PP160 1" NPT 10,000 1.38 1.88
NOTE: Special material components may be supplied with four flats in
(689.46) (35.05) (47.75) place of standard hex.

*Maximum pressure rating is based on the lowest rating of any component.

+ distance across flats
All dimensions for reference only and subject to change.
For prompt service, Parker Autoclave Engineers stocks select products.
Consult your local representative.

Figure 4 Figure 5 Figure 6

(A=Panel hole
drill size)
A HEX E MAX
B

C
HEX A
A HEX

D
B
B

Coupling Bulkhead Coupling Plugs

All general terms and conditions of sale, including limitations of our liability, apply to all products and services sold. 3
Pressures to 15,000 (1034 bar)

Pressure Minimum
Dimensions - inches (mm)
Block
Catalog Connection Fitting
Rating Opening A B C D Thickness
Number Type Pattern
psi (bar)*

Street Pipe Elbow

SPL4400 1/4" NPT 15,000 0.219 1.50 1.50 1.13 1.00 0.75
(1034.20) (5.54) (38.10) (38.10) (28.70) (25.40) (19.05)
SPL6600 3/8" NPT 15,000 0.297 1.75 1.50 1.25 1.00 1.00
(1034.20) (7.54) (44.75) (38.10) (31.75) (25.40) (25.40)
SPL8800 1/2" NPT 15,000 0.359 2.25 2.00 1.63 1.25 1.25 See
(1034.20) (9.12) (57.15) (50.80) (41.40) (31.75) (31.75) Figure 1
SPL12 3/4" NPT 10,000 0.609 2.50 2.62 1.75 1.31 1.50
(689.46) (14.47) (63.50) (66.55) (44.45) (33;27) (38.10)
SPL16 1" NPT 10,000 0.765 4.12 2.50 2.69 1.75 1.75
(689.46) (19.43) (104.65) (63.50) (68.33) (44.45) (44.45)

Male Pipe Elbow

MPL4400 1/4" NPT 15,000 0.219 1.50 1.50 1.13 1.13 0.75
(1034.20) (5.54) (38.10) (38.10) (28.70) (28.70) (19.05)
MPL6600 3/8" NPT 15,000 0.297 1.75 1.75 1.25 1.25 1.00
(1034.20) (7.54) (44.45) (44.45) (31.75) (31.75) (25.40)
MPL8800 1/2" NPT 15,000 0.359 2.00 2.00 1.50 1.50 1.00 See
(1034.20) (9.12) (50.80) (50.80) (38.10) (38.10) (25.40) Figure 2
MPL12 3/4" NPT 10,000 0.609 2.62 2.62 1.75 1.75 1.50
(689.46) (14.47) (66.55) (66.55) (44.45) (44.45) (38.10)
MPL16 1" NPT 10,000 0.765 3.00 3.00 2.13 2.13 1.38
(689.46) (19.43) (76.20) (76.20) (54.10) (54.10) (35.05)

Male Pipe Tee

MPT4440 1/4" NPT 15,000 0.219 2.25 1.50 1.13 1.13 0.75
(1034.20) (5.54) (57.15) (38.10) (28.70) (28.70) (19.05)
MPT6660 3/8" NPT 15,000 0.297 2.50 A
1.75 1.75 1.25 1.00
A
(1034.20) (7.54) (63.50) (44.45) (44.45) (31.75) (25.40)
C
MPT8880 1/2" NPT 15,000 0.359 3.00 2.00 1.50 1.50 1.00 See C
(1034.20) (9.12) (76.20) (50.80) (38.10) (38.10) (25.40) Figure 3
MPT12 3/4" NPT 10,000 0.609 3.50 2.62 1.75 1.75 1.50
(689.46) (14.47) (88.90) (66.55) (44.45) (44.45) (38.10)
MPT16 1" NPT 10,000 0.765 4.12 3.00 2.13 D2.13 1.75 D
B
(689.46) (19.43) (104.65) (76.20) (54.10) (54.10) (44.45) B

Figure 1 Figure 2 Figure 3

A
A A A
C A
C C A
C C
C

D D
D B D
B D B
B B D
B

Street Elbow Male Elbow Male Tee

A A
A
A
C A C
C B
C
C

D
D A HEX B
B D D
D B B
B

A
A

B C
B C

4 All general terms and conditions of sale, including limitations of our liability, apply to all products and services sold.
A HEX
A HEX D
D B
B
Pressure Minimum
Dimensions - inches (mm)
Block
Catalog Connection Fitting
Rating Opening A B C D Thickness
Number Type Pattern
psi (bar)*

Street Pipe Tee

SPT4440 1/4" NPT 15,000 0.219 2.00 1.38 0.81 1.00 0.75
(1034.20) (5.54) (50.80) (35.05) (20.57) (25.40) (19.05)
SPT6660 3/8" NPT 15,000 0.297 2.50 1.50 1.00 1.00 1.00
(1034.20) (7.54) (63.50) (38.10) (25.40) (25.40) (25.40)
SPT8880 1/2" NPT 15,000 0.359 3.00 1.75 1.50 1.25 1.25 See
(1034.20) (9.12) (76.20) (44.45) (38.10) (31.75) (31.75) Figure 4
SPT12 3/4" NPT 10,000 0.609 3.12 2.62 1.38 1.31 1.50
(689.46) (14.47) (79.25) (66.55) (35.05) (33.27) (38.10)
SPT16 1" NPT 10,000 0.765 4.12 3.00 2.13 2.13 1.75
(689.46) (19.43) (104.65) (76.20) (54.10) (54.10) (44.45)

Male Branch Tee

BPT4440 1/4" NPT 15,000 0.219 2.00 1.50 1.00 1.13 0.75
(1034.20) (5.54) (50.80) (38.10) (25.40) (28.70) (19.05)
BPT6660 3/8" NPT A
15,000 0.297 2.00 1.75 1.00 1.25 1.00
(1034.20) C (7.54) (50.80) (44.45) (25.40) (31.75) (25.40)
BPT8880 1/2" NPT 15,000 0.359 3.00 2.25 1.50 1.62 1.25 See
(1034.20) (9.12) (76.20) (57.15) (38.10) (41.15) (31.75) Figure 5
BPT12 3/4" NPT 10,000 0.609 3.00 2.50 1.50 1.75 1.38
B (689.46) D
(14.47) (76.20) (63.50) (38.10) (44.45) (35.05)
BPT16 1" NPT 10,000 0.765 B 4.12 3.00 2.06 2.13 1.75
(689.46) (19.43) (104.65) (76.20) (52.32) (54.10) (44.45)

Figure 4 Figure 5
A A

C C

D
B
D
B D
B

A Street Tee Branch Tee

NOTE: NPT (Pipe) Connections:

- NPT threads must be sealed using a high quality PTFE tape and/or
paste product. Refer toDthreadB sealant manufacturer's instructions
on how to apply thread sealant.
- Sealing performance may vary based on many factors such as
pressure, temperature, media, thread quality, thread material,
proper thread engagement and proper use of thread sealant.
- Customer should limit the number of times an NPT fitting is
assembled and disassembled because thread deformation during
assembly will result in deteriorating seal quality over time. When
using only PTFE tape, consider using thread lubrication to prevent
galling of mating parts.

5
Pipe Hex Nipples
Pressures to 15,000 psi (1034 bar)

For rapid system make-up, Parker Autoclave Engineers supplies

pipe nipples in various sizes and lengths for pipe valves and
fittings.
Special lengths
In addition to the standard lengths listed in the table below,
nipples are available in custom lengths. Consult factory.

Pressure Minimum
Dimensions - in.(mm) Fitting Figure 1
Catalog Connection
Rating Opening A Hex B Pattern
Number Type
psi (bar)*

Pipe Hex Close Nipples A HEX

15MAP4P4 1/4" NPT 15,000 0.219 0.63 1.81
(1034.20) (5.54) (16.00) (46.02)
15MAP6P6 3/8" NPT 15,000 0.297 0.75 1.88
(1034.20) (7.54) (19.05) (47.63)
B
15MAP8P8 1/2" NPT 15,000 0.359 0.94 2.50 See
(1034.20) (9.12) (23.88) (63.50) Figure 1
10MAP12P12 3/4" NPT 10,000 0.609 1.19 2.50 Pipe Nipple
(689.46) (14.47) (30.23) (63.50)
10MAP16P16 1" NPT 10,000 0.765 1.38 3.19
(689.46) (19.43) (35.05) (81.03)
Figure 2

Pipe Hex Nipples

15MAP4P4-4 1/4" NPT 15,000 0.219 0.63 4.00
(1034.20) (5.54) (16.00) (101.60)
15MAP4P4-6 1/4" NPT 15,000 0.219 0.63 6.00
A HEX
(1034.20) (5.54) (16.00) (152.40)
15MAP4P4-8 1/4" NPT 15,000 0.219 0.63 8.00
(1034.20) (5.54) (16.00) (203.20)
15MAP6P6-4 3/8" NPT 15,000 0.297 0.75 4.00 B
(1034.20) (7.54) (19.05) (101.60)
15MAP6P6-6 3/8" NPT 15,000 0.297 0.75 6.00
(1034.20) (7.54) (19.05) (152.40) Reducer Nipple
15MAP6P6-8 3/8" NPT 15,000 0.297 0.75 8.00
(1034.20) (7.54) (19.05) (203.20)
15MAP8P8-4 1/2" NPT 15,000 0.359 0.94 4.00
(1034.20) (9.12) (23.88) (101.60)
15MAP8P8-6 1/2" NPT 15,000 0.359 0.94 6.00 See
(1034.20) (9.12) (23.88) (152.40)
Figure 1
15MAP8P8-8 1/2" NPT 15,000 0.359 0.94 8.00
(1034.20) (9.12) (23.88) (203.20)
10MAP12P12-4 3/4" NPT 10,000 0.609 1.19 4.00
(689.46) (14.47) (30.23) (101.60)
10MAP12P12-6 3/4" NPT 10,000 0.609 1.19 6.00
(689.46) (14.47) (30.23) (152.40)
10MAP12P12-8 3/4" NPT 10,000 0.609 1.19 8.00
(689.46) (14.47) (30.23) (203.20)
10MAP16P16-4 1" NPT 10,000 0.765 1.38 4.00
(689.46) (19.43) (35.05) (101.60)
10MAP16P16-6 1" NPT 10,000 0.765 1.38 6.00
(689.46) (19.43) (35.05) (152.40)
10MAP16P16-8 1" NPT 10,000 0.765 1.38 8.00
(689.46) (19.43) (35.05) (203.20)

Pipe Hex Reducer Nipples

15MAP4P6 1/4" to 3/8" NPT 15,000 0.203 0.75 1.88
(1034.20) (5.16) (19.05) (47.75)
15MAP4P8 1/4" to 1/2" NPT 15,000 0.203 0.94 2.31
(1034.20) (5.16) (23.88) (58.67) See
10MAP8P16 1/2" to 1" NPT 10,000 0.375 1.38 2.88 Figure 2 Special material filters may be supplied with four flats in place of standard hex.
(689.46) (9.53) (35.05) (73.15) *Maximum pressure rating is based on the lowest rating of any component.
10MAP12P16 3/4" to 1" NPT 10,000 0.500 1.38 2.94 Actual working pressure may be determined by tubing pressure rating, if lower.
(689.46) (12.70) (35.05) (74.68) All dimensions for reference only and subject to change.

6 All general terms and conditions of sale, including limitations of our liability, apply to all products and services sold.
Pipe Check Valves
Pressures to 15,000 (1034 bar)

Pipe O-Ring Check Valves

Provides unidirectional flow and tight shut-off for liquids and
gas with high reliability. When differential drops below crack-
ing pressure*, valve shuts off. (Not for use as relief valve.)
Materials: 316 Stainless Steel: body, cover, poppet, cover
gland. 300 Series Stainless Steel: spring
Standard O-ring: Viton, for operation to 400 F (204C).
Buna-N or PTFE available for 250F (121C) or 400F (204C)
FLOW respectively; specify when ordering.
*Cracking Pressure: 20 psi (1.38 bar) 30%. Springs for
Minimum operating temperature for standard o-ring check valves higher cracking pressures (up to 100 psi (6.89 bar)) available
0F (-17.8C). on special order for O-ring style check valves only.

Pipe Ball Check Valves FLOW

FLOW
Prevents reverse flow where leak-tight shut-off is not manda-
tory. When differential drops below cracking pressure, valve
closes. With all-metal components, valve can be used up to
400F (204C). See Technical Information section for connec-
tion temperature limitations. (Not for use as a relief valve.)
Ball and poppet are an integral design to assure positive,
in-line seating without chatter. Poppet is designed essen-
FLOW tially for axial flow with minimum pressure drop.
Materials: 316 Stainless Steel: body, cover, ball poppet,
Minimum operating temperature for pipe ball check valves cover gland. 300 Series Stainless Steel: ball, spring.
0F (-17.8C).
CAUTION: While testing has shown O-Rings to provide satisfactory service life, both cyclic and shelf
life may vary widely with differing service conditions, properties of reactants, pressure and temperature
cycling and age of the O-ring. FREQUENT INSPECTIONS SHOULD BE MADE to detect any deterioration,
and O-rings replaced as required.

Special material check valves may be supplied with four flats in place of standard hex.

7
Pipe Check Valves

Pressure Minimum
Dimensions - inches (mm)
Catalog Connection Rated Fitting
Rating Opening A B C Hex D Hex
Number Type Cv Pattern
psi (bar)*

Pipe O-Ring Check Valves

CPO4400 1/4" NPT 15,000 0.12 .28 3.37 2.38 0.81 0.81
(1034.20) (3.05) (85.60) (60.33) (20.57) (20.57)
CPO6600 3/8" NPT 15,000 0.22 .84 3.95 2.88 1.00 1.00
(1034.20) (5.59) (100.33) (73.15) (25.40) (25.40)
CPO8800 1/2" NPT 15,000 0.36 2.30 5.36 3.88 1.38 1.19 See
(1034.20) (9.14) (136.14) (98.55) (35.05) (30.23) Figure 1
CPO12 3/4" NPT 10,000 0.52 4.70 6.29 4.75 1.75 1.38
(689.46) (13.21) (159.77) (120.65) (44.45) (35.05)
CPO16 1" NPT 10,000 0.69 7.40 7.71 5.75 1.88+ 1.88
(689.46) (17.53) (195.83) (146.05) (47.75) (47.75)

Pipe Ball Check Valves

CPB4400 1/4" NPT 15,000 0.12 .28 3.37 2.38 0.81 0.81
(1034.20) (3.05) (85.60) (60.33) (20.57) (20.57)
CPB6600 3/8" NPT 15,000 0.22 .84 3.95 2.88 1.00 1.00
(1034.20) (5.59) (100.33) (73.15) (25.40) (25.40)
CPB8800 1/2" NPT 15,000 0.36 2.30 5.36 3.88 1.38 1.19 See
(1034.20) (9.12) (136.14) (98.55) (35.05) (30.23)
Figure 1
CPB12 3/4" NPT 10,000 0.52 4.70 6.29 4.75 1.75 1.38
(689.46) (13.21) (159.77) (120.65) (44.45) (35.05)
CPB16 1" NPT 10,000 0.69 7.40 7.71 5.75 1.88+ 1.88
(689.46) (17.53) (195.83) (146.05) (47.75) (47.75)

*Maximum pressure rating is based on the lowest rating of any component. All dimensions for reference only and subject to change.
+ distance across flats For prompt service, Parker Autoclave stocks select products. Consult your local representative.

NOTE: NPT (Pipe) Connections: Figure 1

- NPT threads must be sealed using a high quality PTFE tape and/or
paste product. Refer to thread sealant manufacturer's instructions
on how to apply thread sealant. A
- Sealing performance may vary based on many factors such as
B
pressure, temperature, media, thread quality, thread material,
proper thread engagement and proper use of thread sealant.
- Customer should limit the number of times an NPT fitting is D HEX
assembled and disassembled because thread deformation during C HEX
assembly will result in deteriorating seal quality over time. When
using only PTFE tape, consider using thread lubrication to prevent
galling of mating parts.

Offer of Sale
The items described in this document are available for sale by Parker Hannifin Corporation, its subsidiaries or its authorized distributors. Any sale contract entered by Parker will be governed by the provisions
stated in Parker's standard terms and conditions of sale (copy available upon request).

2013 Parker Hannifin Corporation | Autoclave Engineers is a registered trademark of the Parker Hannifin Corporation 02-9222BE January2013

Caution! Do not mix or interchange parts or tubing with those of

other manufacturers. Doing so is unsafe and will void warranty.

Instrumentation Products Division Parker Hannifin Manufacturing Ltd. Caution! Parker Autoclave Engineers Valves, Fittings and Tools are
not designed to work with common commercial instrument tubing
Autoclave Engineers Operation Instrumentation Products Division, Europe
and will only work with tubing built to Parker Autoclave Engineers
8325 Hessinger Drive Industrial Estate Whitemill AES Specifications. Failure to do so will void warranty.
Erie, Pennsylvania 16509-4679 USA Wexford, Republic of Ireland
PH: 814-860-5700 FAX: 814-860-5811 PH: 353 53 914 1566
www.autoclave.com FAX: 353 53 914 1582 ISO-9001 Certified
Adapters/Couplings
Parker Autoclave Engineers offers a complete line of
standard adapters and couplings as well as special
designs and materials.

Male/Female Adapters:
Male/female adapters are designed to join a female
connection directly to another size and/or type of
connection without the need for an additional
coupling.
Couplings:
Couplings and reducer/adapter couplings accommo-
date female-to-female joining of any combination of
standard size tubing listed.
Male/Male Adapters:
Male-to-male one piece adapters are designed to
join two female connections of any combination
listed.
QSS Male/Female Adapters:
Male/female adapters are designed to join a female
connection directly to another size and/or type of
connection without the need for an additional
coupling.
QSS Male/Male Adapters:
Male-to-male one piece adapters are designed to join two female connections of any
combination listed.
Male/Male JIC Adapters:
Male-to-male one piece adapters have one end machined with a 37 flare design.
Male/Female JIC Adapters:
Male/female adapters are designed to join a female connection directly to another size and/or
type of connection without the need for an additional coupling.
EZ-Union Adapters:
O-ring face seal adapter.
Adapters/Couplings
Flat face style o-ring seal permits easy installation or removal of components.
Butt-Weld/Header Coupling Adapters:
Female to male adapters have one end machined for butt-welding to pipe, tubes, and headers.
Bulkhead Adapters:
Male to female adapters designed for panel mounting.
SAE O-Ring Adapters:
Female to male SAE/MS straight thread o-ring seal adapter.

For specials or other adapters not listed

contact your local Sales Representative.

www.autoclave.com
Adapters/Couplings - Male/Female Adapters

Male /female adapters are designed to adapt a female connec- Other Adapters
tion to another size and/or type of connection without the need Parker Autoclave Engineers supplies many other types of
for additional couplings. In selecting an adapter involving two adapters on special order. These include socketweld to O.D.
different sized connections, the larger connection should be tube or nominal pipe size, extended or special designs.
on the male end where it is possible to maximize the mechani-
cal strength of the adapter. Materials
All Parker Autoclave Engineers adapters are precision ma-
To use this chart: chined from cold-worked Type 316 stainless steel. Other
1. Locate MALE end in vertical column. materials available on special order.
2. Locate desired FEMALE end of adapter across top of chart.
3. Catalog number of required adapter is located at
intersection of columns. Note: Special material couplings may be supplied with four flats in place of
4. For one piece adapter add-OP to suffix of part number standard hex. Pipe connections are rated 400F (204C) to -423F (-17.8C).

FEMALE END
SpeedBite Medium Pressure
Connection
Size and Type 1/8 1/4 3/8 1/2 1/4 3/8 9/16 3/4 1 1-1/2"
W125 SW250 SW375 SW500 SF250CX SF375CX SF562CX SF750CX SF1000CX SF1500CX
Fits this Pressure 15,000 15,000 15,000 10,000 20,000 20,000 20,000 20,000 20,000 15,000
Female Rating
Connection PSI (bar)* (1034.20) (1034.20) (1034.20) (689.45) (1378.93) (1378.93) (1378.93) (1378.93) (1378.93) (1034.20)
15,000
1/8 W125 (1034.20)
6M24C2 6M26C2 4M28C2 6M24C6 6M26C6 6M29C6 15M224C6
15,000
SpeedBite

1/4 SW250 (1034.20) 6M42D1 6M46D2 4M48D2 6M44D6 6M46D6 6M49D6 6M412D6
15,000
3/8 SW375 (1034.20) 6M62D1 6M64D2 4M68D2 6M64D6 6M66D6 6M69D6 6M612D6 6M616D6 15M624D6
10,000
1/2 SW500 (689.46) 4M82D1 4M84D2 4M86D2 4M84D6 4M86D6 4M89D6 4M812D6 4M816D6
20,000
1/4 SF250CX (1378.93) 15MX42K1 6MX44K2 6MX46K2 4MX48K2 20M44K6 20M46K6 20M49K6 20M412K6 20M416K6
20,000
3/8 SF375CX 15MX62K1 6MX64K2 6MX66K2 4MX68K2 20M64K6 20M66K6 20M69K6 20M612K6 20M616K6
Medium Pressure

(1378.93)
20,000
9/16 SF562CX (1378.93) 15MX92K1 6MX94K2 6MX96K2 4MX98K2 20M94K6 20M96K6 20M99K6 20M912K6 20M916K6
20,000
3/4 SF750CX (1378.93) 15MX122K1 6MX124K2 6MX126K2 4MX128K2 20M124K6 20M126K6 20M129K6 20M1212K6 20M1216K6
20,000
1 SF1000CX (1378.93) 15MX162K1 6MX164K2 6MX166K2 4MX168K2 20M164K6 20M166K6 20M169K6 20M1612K6 20M1616K6
15,000
1-1/2 SF1500CX (1034.20) 15M244K6 15M249K6 15M2412K6 15M2416K6
43,000
MALE END

1 F1000C43 (2964.69)
60,000
1/4 F250C (4136.85) 15M42B1 6M44B2 6M46B2 4M48B2 20M44B6 20M46B6 20M49B6 20M412B6
High Pressure

150,000
5/16 F312C150 (10342.14) 6M54B2 6M56B2 4M58B2 20M54B6 20M56B6 20M59B6 20M512B6
60,000
3/8 F375C (4136.85) 15M62B1 6M64B2 6M66B2 4M68B2 20M64B6 20M66B6 20M69B6 20M612B6 20M616B6
60,000
9/16 F562C (4136.85) 15M92B1 6M94B2 6M94B2 4M98B2 20M94B6 20M96B6 20M99B6 20M912B6 20M916B6
40,000
9/16 F562C40 (2757.90) 6M94G2 20M912G6
10,000
7/16 F437FB (689.45) 15M72E1 6M74E2 6M76E2 4M78E2 15M74E6 15M76E6 15M79E6
10,000
Flat Bottom

9/16 F562FB (689.45) 15M92E1 6M94E2 6M96E2 4M98E2 15M94E6 15M96E6 15M99E6 15M912E6 15M916E6
Flat Top

10,000
9/16 F562FT (689.45) 15M92R1 6M94R2 6M96R2 4M98R2 15M94R6 15M96R6 15M99R6 15M912R6 15M916R6
10,000
3/4 F750FB (689.45) 15M122E1 6M124E2 6M126E2 4M128E2 15M124E6 15M126E6 15M129E6 15M1212E6 15M1216E6
15,000
1/8 NPT (1034.20) 15M22N1 15M24N2 15M26N2 10M28N2 15M24N6 15M26N6 15M29N6
National Pipe Thread (NPT)

15,000
1/4 NPT (1034.20) 15M42N1 15M44N2 15M46N2 10M48N2 15M44N6 15M46N6 15M49N6 15M412N6 15M416N6 15M424N6
15,000
3/8 NPT (1034.20) 15M62N1 15M64N2 15M66N2 10M68N2 15M64N6 15M66N6 15M69N6 15M612N6 15M616N6
15,000
1/2 NPT (1034.20) 15M82N1 15M84N2 15M86N2 10M88N2 15M84N6 15M86N6 15M89N6 15M812N6 15M816N6
10,000
3/4 NPT (689.45) 10M124N2 10M126N2 10M128N2 10M124N6 10M126N6 10M129N6 10M1212N6 10M1216N6
10,000
1 NPT (689.45) 10M166N2 10M168N2 10M166N6 10M169N6 10M1612N6 10M1616N6

Note: * The maximum pressure rating for an adapter is determined by the connection component with the
All Parker Autoclave Engineers adapters are supplied complete with appropriate glands, collars, tube LOWEST pressure rating; that is, the two end connections and the tubing or pipe used, whichever is
nuts and sleeves unless specified without. LOWER.
CAUTION: See appropriate pressure section in reference to proper selection of tubing.

2 All general terms and conditions of sale, including limitations of our liability, apply to all products and services sold.
Double Cone Plug Double Cone Plug Flat Bottom Gasket Flat Top Gasket Male NPT
(Medium Pressure shown) (SpeedBite shown) (Medium Pressure shown) (SpeedBite shown) (High Pressure shown)

FEMALE END
High Pressure National Pipe Thread (NPT)
1 1/4 5/16 3/8 9/16 9/16 1/8 1/4 3/8 1/2 3/4 1
F1000C43 F250C F312C150 F375C F562C F562C40 NPT NPT NPT NPT NPT NPT
43,000 60,000 150,000 60,000 60,000 40,000 15,000 15,000 15,000 15,000 10,000 10,000
(2964.69) (4136.85) (10342.14) (4136.85) (4136.85) (2757.90) (1034.20) (1034.20) (1034.20) (1034.20) (689.45) (689.45)
6M24C3 6M26C3 6M29C3 15M22C8 15M24C8 15M26C8 15M28C8

6M44D3 6M46D3 6M49D3 15M42D8 15M44D8 15M46D8 15M48D8 10M412D8

6M64D3 6M66D3 6M69D3 15M62D8 15M64D8 15M66D8 15M68D8 10M612D8 10M616D8

4M84D3 4M86D3 4M89D3 10M82D8 10M84D8 10M86D8 10M88D8 10M812D8 10M816D8

20M44K3 20M45K3 20M46K3 20M49K3 15MX42K8 15MX44K8 15MX46K8 15MX48K8 10MX412K8

20M64K3 20M65K3 20M66K3 20M69K3 15MX62K8 15MX64K8 15MX66K8 15MX68K8 10MX612K8 10MX616K8

20M94K3 20M95K3 20M96K3 20M99K3 15MX92K8 15MX94K8 15MX96K8 15MX98K8 10MX912K8 10MX916K8

20M1216K3 20M124K3 20M125K3 20M126K3 20M129K3 20M129K40 15MX124K8 15MX126K8 15MX128K8 10MX1212K8 10MX1216K8

20M164K3 20M166K3 20M169K3 15MX164K8 15MX166K8 15MX168K8 10MX1612K8 10MX1616K8

15M244K8 15M248K8

43M164B3 43M166B3 43M169B3 43M169B40

43M416B3 60M44B3 60M45B3 60M46B3 60M49B3 15M42B8 15M44B8 15M46B8 15M48B8 10M412B8 10M416B8

60M54B3 60M56B3 60M59B3 15M58B8 10M512B8

43M616B3 60M64B3 60M65B3 60M66B3 60M69B3 15M62B8 15M64B8 15M66B8 15M68B8 10M612B8 10M616B8

43M916B3 60M94B3 60M95B3 60M96B3 60M99B3 15M92B8 15M94B8 15M96B8 15M98B8 10M912B8 10M916B8

15M98G8

15M74E3 15M76E3 15M79E3 10M72E8 10M74E8 10M76E8 10M78E8 10M712E8

15M94E3 15M96E3 10M92E8 10M94E8 10M96E8 10M98E8 10M912E8 10M916E8

15M94R3 15M96R3 15M99R3 10M92R8 10M94R8 10M96R8 10M98R8 10M912R8 10M916R8

15M124E3 15M126E3 15M129E3 10M122E8 10M124E8 10M126E8 10M128E8 10M1212E8 10M1216E8

15M24N3 15M26N3 15M29N3 15M24N8

15M44N3 15M45N3 15M46N3 15M49N3 15M42N8 15M46N8 15M48N8

15M64N3 15M66N3 15M69N3 15M69N40 15M64N8 15M68N8

15M84N3 15M86N3 15M89N3 15M89N40 15M84N8 15M86N8 10M812N8

10M124N3 10M126N3 10M129N3 10M122N8 10M124N8 10M128N8

10M166N3 10M169N3 10M168N8

Parker Autoclave Engineers Male/Female Adapters are available in a one-piece design. They are identi- For prompt service, Parker Autoclave Engineers stocks select products.
cal to the two piece designs in length and can be ordered by adding the suffix - OP to the two piece Consult factory.
adapter part numbers listed.

All general terms and conditions of sale, including limitations of our liability, apply to all products and services sold. 3
Adapters/Couplings - Male/Female Adapters
Speed Bite
Male End Dimension inches (mm) Male End Dimension inches (mm)
Female Catalog Female Catalog
Fits this Fits this
End Number A Hex B End Number A Hex B
Connection Connection

W125 W125 SW375 W125 6M62D1 0.75 (19.1) 1.16 (29.4)

W125 SW250 6M24C2 0.63 (15.9) 1.29 (32.1) SW375 SW250 6M64D2 0.75 (19.1) 1.41 (35.7)
W125 SW375 6M26C2 0.75 (19.1) 1.41 (35.8) SW375 SW375
W125 SW500 4M28C2 1.00 (25.4) 1.53 (38.8) SW375 SW500 4M68D2 1.00 (25.4) 1.78 (45.3)
W125 SF250CX 6M24C6 0.63 (15.9) 1.41 (35.8) SW375 SF250CX 6M64D6 0.75 (19.1) 1.41 (35.9)
W125 SF375CX 6M26C6 0.75 (19.1) 1.41 (35.8) SW375 SF375CX 6M66D6 0.75 (19.1) 1.59 (40.4)
W125 SF562CX 6M29C6 1.00 (25.4) 1.66 (42.1) SW375 SF562CX 6M69D6 1.00 (25.4) 1.72 (43.7)
W125 SF750CX SW375 SF750CX 6M612D6 1.38 (35.1) 2.28 (57.9)
W125 SF1000CX SW375 SF1000CX 6M616D6 1.75 (44.5) 2.78 (70.7)
W125 SF1500CX 15M224C6 2.25 (57.15) 3.41 (86.54) SW375 SF1500CX 15M624D6 2.25 (57.15) 3.53 (89.71)
W125 F1000C43 SW375 F1000C43
W125 F250C 6M24C3 0.75 (19.1) 1.16 (29.5) SW375 F250C 6M64D3 0.75 (19.1) 1.41 (35.7)
W125 F312C150 SW375 F312C150
W125 F375C 6M26C3 1.00 (25.4) 1.34 (34.1) SW375 F375C 6M66D3 1.00 (25.4) 1.66 (42.2)
W125 F562C 6M29C3 1.38 (35.1) 1.59 (40.5) SW375 F562C 6M69D3 1.38 (35.1) 1.78 (45.3)
W125 F562C40 SW375 F562C40
W125 1/8 NPT 15M22C8 0.63 (15.9) 1.25 (31.8) SW375 1/8 NPT 15M62D8 0.75 (19.1) 1.41 (35.7)
W125 1/4 NPT 15M24C8 0.75 (19.1) 1.47 (37.3) SW375 1/4 NPT 15M64D8 0.75 (19.1) 1.66 (42.2)
W125 3/8 NPT 15M26C8 1.00 (25.4) 1.53 (38.8) SW375 3/8 NPT 15M66D8 1.00 (25.4) 1.78 (45.3)
W125 1/2 NPT 15M28C8 1.18 (30.1) 1.81 (46.0) SW375 1/2 NPT 15M68D8 1.18 (30.1) 1.97 (50.0)
W125 3/4 NPT SW375 3/4 NPT 10M612D8 1.38 (35.1) 2.28 (57.9)
W125 1 NPT SW375 1 NPT 10M616D8 1.75 (44.5) 2.78 (70.7)

SW250 W125 6M42D1 0.63 (15.9) 1.08 (27.4) SW500 W125 4M82D1 0.94 (23.8) 1.22 (31.0)
SW250 SW250 SW500 SW250 4M84D2 0.94 (23.8) 1.34 (34.1)
SW250 SW375 6M46D2 0.75 (19.1) 1.64 (41.7) SW500 SW375 4M86D2 0.94 (23.8) 1.47 (37.3)
SW250 SW500 4M48D2 1.00 (25.4) 1.77 (44.9) SW500 SW500
SW250 SF250CX 6M44D6 0.63 (15.9) 1.52 (38.5) SW500 SF250CX 4M84D6 1.00 (25.4) 1.59 (40.5)
SW250 SF375CX 6M46D6 0.75 (19.1) 1.77 (44.9) SW500 SF375CX 4M86D6 1.00 (25.4) 1.59 (40.5)
SW250 SF562CX 6M49D6 1.00 (25.4) 1.89 (48.0) SW500 SF562CX 4M89D6 1.00 (25.4) 1.66 (42.2)
SW250 SF750CX 6M412D6 1.38 (35.1) 2.27 (57.7) SW500 SF750CX 4M812D6 1.38 (35.1) 2.09 (53.2)
SW250 SF1000CX SW500 SF1000CX 4M816D6 1.75 (44.5) 2.72 (69.0)
SW250 F1000C43 SW500 F1000C43
SW250 F250C 6M44D3 .75 (19.1) 1.27 (32.2) SW500 F250C 4M84D3 0.94 (23.8) 1.41 (35.7)
SW250 F312C150 SW500 F312C150
SW250 F375C 6M46D3 1.00 (25.4) 1.70 (43.3) SW500 F375C 4M86D3 1.00 (25.4) 1.59 (40.5)
SW250 F562C 6M49D3 1.38 (35.1) 1.77 (44.9) SW500 F562C 4M89D3 1.38 (35.1) 1.72 (43.7)
SW250 F562C40 SW500 F562C40
SW250 1/8 NPT 15M42D8 0.63 (15.9) 1.39 (35.3) SW500 1/8 NPT 10M82D8 1.00 (25.4) 1.34 (34.1)
SW250 1/4 NPT 15M44D8 0.75 (19.1) 1.64 (41.7) SW500 1/4 NPT 10M84D8 1.00 (25.4) 1.47 (37.3)
SW250 3/8 NPT 15M46D8 1.00 (25.4) 1.70 (43.3) SW500 3/8 NPT 10M86D8 1.00 (25.4) 1.72 (43.7)
SW250 1/2 NPT 15M48D8 1.18 (30.1) 1.95 (49.6) SW500 1/2 NPT 10M88D8 1.18 (30.1) 2.16 (54.7)
SW250 3/4 NPT 10M412D8 1.38 (35.1) 2.21 (56.0) SW500 3/4 NPT 10M812D8 1.38 (35.1) 2.22 (56.3)
SW250 1 NPT SW500 1 NPT 10M816D8 1.75 (44.5) 2.47 (62.7)

Maximum pressure rating is based on the lowest rating of any For prompt service, Parker Autoclaves Engineers stocks
component. Actual working pressure may be determined by select products. Consult factory.
tubing pressure rating, if lower.
A
Note: For pressure rating see selection chart. Hex

All Dimensions for reference only and subject to change.

4 All general terms and conditions of sale, including limitations of our liability, apply to all products and services sold.
Medium Pressure

Male End Dimension inches (mm) Male End Dimension inches (mm)
Female Catalog Female Catalog
Fits this Fits this
End Number A Hex B End Number A Hex B
Connection Connection

SF250CX W125 15MX42K1 0.63 (15.9) 1.34 (34.1) SF562CX W125 15MX92K1 0.81 (20.6) 1.75 (44.5)
SF250CX SW250 6MX44K2 0.63 (15.9) 1.59 (40.5) SF562CX SW250 6MX94K2 0.94 (23.8) 1.75 (44.5)
SF250CX SW375 6MX46K2 0.75 (19.1) 1.59 (40.5) SF562CX SW375 6MX96K2 0.94 (23.8) 1.75 (44.5)
SF250CX SW500 4MX48K2 1.00 (25.4) 1.00 (25.4) SF562CX SW500 4MX98K2 1.00 (25.4) 1.94 (49.2)
SF250CX SF250CX 20M44K6 0.63 (15.9) 1.47 (37.3) SF562CX SF250CX 20M94K6 0.94 (23.8) 1.34 (34.1)
SF250CX SF375CX 20M46K6 0.75 (19.1) 1.59 (40.5) SF562CX SF375CX 20M96K6 0.94 (23.8) 1.34 (59.5)
SF250CX SF562CX 20M49K6 1.00 (25.4) 1.97 (50.0) SF562CX SF562CX 20M99K6 1.00 (25.4) 2.00 (50.8)
SF250CX SF750CX 20M412K6 1.38 (35.1) 2.34 (59.5) SF562CX SF750CX 20M912K6 1.38 (35.1) 3.12 (79.3)
SF250CX SF1000CX 20M416K6 1.75 (44.5) 2.84 (72.2) SF562CX SF1000CX 20M916K6 1.75 (44.5) 3.75 (95.3)
SF250CX F1000C43 SF562CX F1000C43
SF250CX F250C 20M44K3 0.75 (19.1) 1.28 (32.5) SF562CX F250C 20M94K3 0.81 (20.6) 1.81 (46.0)
SF250CX F312C150 20M45K3 1.00 (25.4) 2.09 (53.2) SF562CX F312C150 20M95K3 1.00 (25.4) 2.50 (63.5)
SF250CX F375C 20M46K3 1.00 (25.4) 1.59 (40.5) SF562CX F375C 20M96K3 1.00 (25.4) 2.00 (50.8)
SF250CX F562C 20M49K3 1.38 (35.1) 1.97 (50.0) SF562CX F562C 20M99K3 1.38 (35.1) 2.12 (54.0)
SF250CX F562C40 SF562CX F562C40
SF250CX 1/8 NPT 15MX42K8 0.63 (15.9) 1.47(37.3) SF562CX 1/8 NPT 15MX92K8 0.94 (23.8) 1.75 (44.5)
SF250CX 1/4 NPT 15MX44K8 0.75 (19.1) 1.59 (40.5) SF562CX 1/4 NPT 15MX94K8 0.94 (23.8) 2.18 (55.5)
SF250CX 3/8 NPT 15MX46K8 1.00 (25.4) 1.66 (42.2) SF562CX 3/8 NPT 15MX96K8 0.94 (23.8) 2.18 (55.5)
SF250CX 1/2 NPT 15MX48K8 1.18 (30.1) 1.97 (50.0) SF562CX 1/2 NPT 15MX98K8 1.18 (30.1) 2.44 (61.9)
SF250CX 3/4 NPT 10MX412K8 1.38 (35.1) 2.09 (53.2) SF562CX 3/4 NPT 10MX912K8 1.50 (38.1) 2.50 (63.5)
SF250CX 1 NPT SF562CX 1 NPT 10MX916K8 1.75 (44.5) 3.00 (76.2)

SF375CX W125 15MX62K1 0.63 (15.9) 1.50 (38.1) SF750CX W125

SF375CX SW250 6MX64K2 0.63 (15.9) 1.63 (41.3) SF750CX SW250 6MX124K2 1.18 (30.1) 2.06 (52.4)
SF375CX SW375 6MX66K2 1.00 (25.4) 1.82 (46.0) SF750CX SW375 6MX126K2 1.18 (30.1) 1.97 (50.0)
SF375CX SW500 4MX68K2 1.00 (25.4) 2.00 (50.8) SF750CX SW500 4MX128K2 1.18 (30.1) 2.32 (58.72)
SF375CX SF250CX 20M64K6 0.63 (15.9) 1.39 (35.2) SF750CX SF250CX 20M124K6 1.18 (30.1) 2.06 (52.4)
SF375CX SF375CX 20M66K6 .75 (19.1) 1.66 (42.2) SF750CX SF375CX 20M126K6 1.18 (30.1) 2.06 (52.4)
SF375CX SF562CX 20M69K6 1.00 (25.4) 2.06 (52.4) SF750CX SF562CX 20M129K6 1.18 (30.1) 1.69 (61.9)
SF375CX SF750CX 20M612K6 1.38 (35.1) 2.50 (63.5) SF750CX SF750CX 20M1212K6 1.38 (35.1) 2.56 (65.0)
SF375CX SF1000CX 20M616K6 1.75 (44.5) 3.06 (77.8) SF750CX SF1000CX 20M1216K6 1.75 (44.5) 3.50 (88.9)
SF375CX F1000C43 SF750CX F1000C43 20M1216K3 1.75 (44.5) 3.063 (77.78)
SF375CX F250C 20M64K3 0.75 (19.1) 1.44 (36.5) SF750CX F250C 20M124K3 1.18 (30.1) 2.06 (52.32)
SF375CX F312C150 20M65K3 1.00 (25.4) 2.25 (57.2) SF750CX F312C150 20M125K3 1.18 (30.1) 3.12 (79.3)
SF375CX F375C 20M66K3 1.00 (25.4) 1.63 (41.3) SF750CX F375C 20M126K3 1.18 (30.1) 2.06 (52.4)
SF375CX F562C 20M69K3 1.38 (35.1) 1.88 (47.6) SF750CX F562C 20M129K3 1.38 (35.1) 2.32 (58.93)
SF375CX F562C40 SF750CX F562C40 20M129K40 1.38 (35.1) 2.38 (60.4)
SF375CX 1/8 NPT 15MX62K8 0.63 (15.9) 1.75 (44.5) SF750CX 1/8 NPT
SF375CX 1/4 NPT 15MX64K8 0.75 (19.1) 1.81 (46.0) SF750CX 1/4 NPT 15MX124K8 1.18 (30.1) 2.50 (63.5)
SF375CX 3/8 NPT 15MX66K8 1.00 (25.4) 1.88 (47.6) SF750CX 3/8 NPT 15MX126K8 1.18 (30.1) 2.88 (73.0)
SF375CX 1/2 NPT 15MX68K8 1.18 (30.1) 2.12 (54.0) SF750CX 1/2 NPT 15MX128K8 1.18 (30.1) 2.88 (73.0)
SF375CX 3/4 NPT 10MX612K8 1.38 (35.1) 2.38 (60.3) SF750CX 3/4 NPT 10MX1212K8 1.38 (35.1) 3.12 (79.3)
SF375CX 1 NPT 10MX616K8 1.75 (44.5) 2.63 (66.7) SF750CX 1 NPT 10MX1216K8 1.75 (44.5) 3.50 (88.9)

Maximum pressure rating is based on the lowest rating of any For prompt service, Parker Autoclave Engineers stocks
component. Actual working pressure may be determined by select products. Consult factory.
tubing pressure rating, if lower.

Note: For pressure rating see selection chart.

A
All Dimensions for reference only and subject to change. Hex

Adapter configurations may vary from outline shown

All general terms and conditions of sale, including limitations of our liability, apply to all products and services sold. 5
Male End Dimension inches (mm)
Female Catalog
Fits this
End Number A Hex B
Connection A
Hex
SF1000CX W125 6MX162K2 1.38 (35.1) 2.69 (68.3)
SF1000CX SW250 6MX164K2 1.38 (35.1) 2.63 (66.7)
SF1000CX SW375 6MX166K2 1.38 (35.1) 2.63 (66.7)
B
SF1000CX SW500 4MX168K2 1.18 (30.1) 2.69 (68.25)
SF1000CX SF250CX 20M164K6 1.38 (35.1) 2.63 (66.7) Adapter configurations may vary from outline shown
SF1000CX SF375CX 20M166K6 1.38 (35.1) 2.63 (66.7)
SF1000CX SF562CX 20M169K6 1.38 (35.1) 2.63 (66.7)
SF1000CX SF750CX 20M1612K6 1.50 (38.1) 2.12 (54.0) Male End Dimension inches (mm)
Female Catalog
SF1000CX SF1000CX Fits this
End Number A Hex B
SF1000CX F1000C43 Connection
SF1000CX F250C 20M164K3 1.38 (35.1) 2.18 (55.6)
SF1500CX SF250CX 15M244K6 1.88 (47.75) 3.31 (84.12)
SF1000CX F312C150
SF1500CX SF562CX 15M249K6 1.88 (47.75) 3.31 (84.12)
SF1000CX F375C 20M166K3 1.38 (35.1) 2.18 (55.6)
SF1500CX SF750CX 15M2412K6 1.88 (47.75) 3.81 (96.82)
SF1000CX F562C 20M169K3 1.50 (38.1) 2.44 (61.9)
SF1500CX SF1000CX 15M2416K6 1.88 (47.75) 4.06 (103.17)
SF1000CX F562C40
SF1500CX 1/4 NPT 15M244K8 1.75 (44.5) 3.56 (90.43)
SF1000CX 1/8 NPT
SF1500CX 1/2 NPT 15M248K8 1.75 (44.5) 3.56 (90.43)
SF1000CX 1/4 NPT 15MX164K8 1.50 (38.1) 3.18 (81.0)
SF1000CX 3/8 NPT 15MX166K8 1.75 (44.5) 3.18 (81.0)
SF1000CX 1/2 NPT 15MX168K8 1.75 (44.5) 3.18 (81.0)
SF1000CX 3/4 NPT 10MX1612K8 1.75 (44.5) 3.18 (81.0)
SF1000CX 1 NPT 10MX1616K8 1.75 (44.5) 3.18 (81.0)

High Pressure
Male End Dimension inches (mm) Male End Dimension inches (mm)
Female Catalog Female Catalog
Fits this Fits this
End Number A Hex B End Number A Hex B
Connection Connection

F1000C43 W125 F250C W125 15M42B1 0.63 (15.9) 1.25 (31.7)

F1000C43 SW250 F250C SW250 6M44B2 0.63 (15.9) 1.44 (36.5)
F1000C43 SW375 F250C SW375 6M46B2 0.75 (19.1) 1.56 (39.7)
F1000C43 SW500 F250C SW500 4M48B2 1.00 (25.4) 1.69 (42.8)
F1000C43 SF250CX F250C SF250CX 20M44B6 0.63 (15.9) 1.31 (33.3)
F1000C43 SF375CX F250C SF375CX 20M46B6 0.75 (19.1) 1.69 (42.8)
F1000C43 SF562CX F250C SF562CX 20M49B6 1.00 (25.4) 1.81 (46.0)
F1000C43 SF750CX F250C SF750CX 20M412B6 1.38 (35.1) 2.18 (55.5)
F1000C43 SF1000CX F250C SF1000CX
F1000C43 F1000C43 F250C F1000C43 43M416B3 1.75 (44.5) 3.00 (76.2)
F1000C43 F250C 43M164B3 1.38 (35.1) 2.31 (58.7) F250C F250C 60M44B3 0.81 (20.6) 1.38 (35.1)
F1000C43 F312C150 F250C F312C150 60M45B3 1.00 (25.4) 2.06 (52.4)
F1000C43 F375C 43M166B3 1.38 (35.1) 2.31 (58.7) F250C F375C 60M46B3 1.00 (25.4) 1.56 (39.7)
F1000C43 F562C 43M169B3 1.50 (38.1) 2.56 (65.1) F250C F562C 60M49B3 1.38 (35.1) 1.81 (46.0)
F1000C43 F562C40 43M169B40 1.50 (38.1) 2.56 (65.1) F250C F562C40
F1000C43 1/8 NPT F250C 1/8 NPT 15M42B8 0.63 (15.9) 1.38 (34.9)
F1000C43 1/4 NPT F250C 1/4 NPT 15M44B8 0.75 (19.1) 1.69 (42.8)
F1000C43 3/8 NPT F250C 3/8 NPT 15M46B8 1.00 (25.4) 1.69 (42.8)
F1000C43 1/2 NPT F250C 1/2 NPT 15M48B8 1.18 (30.1) 2.00 (50.8)
F1000C43 3/4 NPT F250C 3/4 NPT 10M412B8 1.38 (35.1) 2.18 (55.5)
F1000C43 1 NPT F250C 1 NPT 10M416B8 1.75 (44.5) 2.38 (60.3)

All Dimensions for reference only and subject to change.

Note: Adapter configurations may vary from outline shown

6 All general terms and conditions of sale, including limitations of our liability, apply to all products and services sold.
Male End Dimension inches (mm) Male End Female Dimension inches (mm)
Female Catalog Catalog
Fits this Fits this End
End Number A Hex B Number A Hex B
Connection Connection

F312C150 W125 F562C W125 15M92B1 1.18 (30.1) 1.50 (38.1)

F312C150 SW250 6M54B2 0.75 (19.1) 2.13 (54.0) F562C SW250 6M94B2 1.18 (30.1) 1.69 (42.8)
F312C150 SW375 6M56B2 0.75 (19.1) 2.25 (57.2) F562C SW375 6M96B2 1.18 (30.1) 1.69 (42.8)
F312C150 SW500 4M58B2 1.00 (25.4) F562C SW500 4M98B2 1.18 (30.1) 1.75 (44.5)
F312C150 SF250CX 20M54B6 0.75 (19.1) 2.00 (50.8) F562C SF250CX 20M94B6 1.18 (30.1) 1.69 (42.8)
F312C150 SF375CX 20M56B6 0.75 (19.1) 2.25 (57.2) F562C SF375CX 20M96B6 1.18 (30.1) 1.81 (46.0)
F312C150 SF562CX 20M59B6 1.00 (25.4) 2.38 (60.4) F562C SF562CX 20M99B6 1.18 (30.1) 1.94 (49.2)
F312C150 SF750CX 20M512B6 1.38 (35.1) 3.00 (76.2) F562C SF750CX 20M912B6 1.38 (35.1) 2.31 (58.7)
F312C150 SF1000CX F562C SF1000CX 20M916B6 1.75 (44.5) 3.31 (84.1)
F312C150 F1000C43 F562C F1000C43 43M916B3 1.75 (44.5) 3.31 (84.1)
F312C150 F250C 60M54B3 1.00 (25.4) 2.06 (52.4) F562C F250C 60M94B3 1.18 (30.1) 1.69 (42.8)
F312C150 F312C150 F562C F312C150 60M95B3 1.18 (30.1) 2.31 (58.7)
F312C150 F375C 60M56B3 1.00 (25.4) 2.25 (57.2) F562C F375C 60M96B3 1.18 (30.1) 1.88 (47.6)
F312C150 F562C 60M59B3 1.38 (35.1) 2.56 (65.1) F562C F562C 60M99B3 1.38 (35.1) 2.31 (58.7)
F312C150 F562C40 F562C F562C40
F312C150 1/8 NPT F562C 1/8 NPT 15M92B8 0.94 (23.8) 1.81 (46.0)
F312C150 1/4 NPT F562C 1/4 NPT 15M94B8 0.94 (23.8) 1.81 (46.0)
F312C150 3/8 NPT F562C 3/8 NPT 15M96B8 0.94 (23.8) 1.81 (46.0)
F312C150 1/2 NPT 15M58B8 1.18 (30.1) 2.69 (68.3) F562C 1/2 NPT 15M98B8 1.18 (30.1) 2.13 (54.0)
F312C150 3/4 NPT 10M512B8 1.38 (35.1) 2.88 (73.0) F562C 3/4 NPT 10M912B8 1.50 (38.1) 2.31 (58.7)
F312C150 1 NPT F562C 1 NPT 10M916B8 1.75 (44.5) 1.69 (42.8)

F375C W125 15M62B1 0.81 (20.6) 1.44 (36.5) F562C40 W125

F375C SW250 6M64B2 0.81 (20.6) 1.69 (42.8) F562C40 SW250
F375C SW375 6M66B2 0.81 (20.6) 1.69 (42.8) F562C40 SW375
F375C SW500 4M68B2 1.00 (25.4) 1.75 (44.5) F562C40 SW500
F375C SF250CX 20M64B6 0.81 (20.6) 1.75 (44.5) F562C40 SF250CX
F375C SF375CX 20M66B6 0.81 (20.6) 1.88 (47.6) F562C40 SF375CX
F375C SF562CX 20M69B6 1.00 (25.4) 2.00 (50.8) F562C40 SF562CX
F375C SF750CX 20M612B6 1.38 (35.1) 2.25 (57.2) F562C40 SF750CX 20M912G6 1.38 (35.1) 2.50 (63.5)
F375C SF1000CX 20M616B6 1.75 (44.5) 3.25 (82.6) F562C40 SF1000CX
F375C F1000C43 43M616B6 1.75 (44.5) 3.25 (82.6) F562C40 F1000C43
F375C F250C 60M64B3 0.81 (20.6) 1.63 (41.3) F562C40 F250C
F375C F312C150 60M65B3 1.00 (25.4) 2.25 (57.2) F562C40 F312C150
F375C F375C 60M66B3 1.00 (25.4) 1.88 (47.63) F562C40 F375C
F375C F562C 60M69B3 1.38 (35.1) 1.63 (41.3) F562C40 F562C
F375C F562C40 F562C40 F562C40
F375C 1/8 NPT 15M62B8 0.81 (20.6) 1.50 (38.1) F562C40 1/8 NPT
F375C 1/4 NPT 15M64B8 0.81 (20.6) 1.75 (44.5) F562C40 1/4 NPT
F375C 3/8 NPT 15M66B8 1.00 (25.4) 2.00 (50.8) F562C40 3/8 NPT
F375C 1/2 NPT 15M68B8 1.18 (30.1) 2.25 (57.2) F562C40 1/2 NPT 15M98G8 1.18 (30.1) 2.13 (54.0)
F375C 3/4 NPT 10M612B8 1.38 (35.1) 2.50 (63.5) F562C40 3/4 NPT
F375C 1 NPT 10M616B8 1.75 (44.5) 2.75 (69.9) F562C40 1 NPT

Note: For pressure rating see selection chart. A

Hex
All Dimensions for reference only and subject to change.

Adapter configurations may vary from outline shown

All general terms and conditions of sale, including limitations of our liability, apply to all products and services sold. 7
Flat Bottom
Male End Dimension inches (mm) Male End Dimension inches (mm)
Female Catalog Female Catalog
Fits this Fits this
End Number A Hex B End Number A Hex B
Connection Connection

F437FB W125 15M72E1 0.50 (12.7) 1.41 (35.8) F750FB W125 15M122E1 0.75 (19.1) 1.69 (42.8)
F437FB SW250 6M74E2 0.63 (15.9) 1.53 (38.9) F750FB SW250 6M124E2 0.81 (20.6) 2.06 (52.4)
F437FB SW375 6M76E2 0.75 (19.1) 1.91 (48.4) F750FB SW375 6M126E2 0.75 (19.1) 1.94 (49.2)
F437FB SW500 4M78E2 1.00 (25.4) 2.16 (54.8) F750FB SW500 4M128E2 1.00 (25.4) 2.18 (55.5)
F437FB SF250CX 15M74E6 0.63 (15.9) 1.53 (38.9) F750FB SF250CX 15M124E6 0.81 (20.6) 1.94 (49.2)
F437FB SF375CX 15M76E6 0.75 (19.1) 1.78 (45.2) F750FB SF375CX 15M126E6 0.81 (20.6) 2.06 (52.4)
F437FB SF562CX 15M79E6 1.00 (25.4) 1.91 (48.4) F750FB SF562CX 15M129E6 1.00 (25.4) 1.31 (33.3)
F437FB SF750CX F750FB SF750CX 15M1212E6 1.38 (35.1) 1.69 (42.8)
F437FB SF1000CX F750FB SF1000CX 15M1216E6 1.75 (44.5) 3.31 (84.1)
F437FB F1000C43 F750FB F1000C43
F437FB F250C 15M74E3 0.75 (19.1) 1.53 (38.9) F750FB F250C 15M124E3 1.00 (25.4) 1.94 (49.2)
F437FB F312C150 F750FB F312C150
F437FB F375C 15M76E3 1.00 (25.4) 1.78 (45.2) F750FB F375C 15M126E3 1.00 (25.4) 2.18 (55.5)
F437FB F562C 15M79E3 1.38 (35.1) 2.03 (51.6) F750FB F562C 15M129E3 1.38 (35.1) 2.31 (58.7)
F437FB F562C40 F750FB F562C40
F437FB 1/8 NPT 10M72E8 0.63 (15.9) 1.59 (40.4) F750FB 1/8 NPT 10M122E8 0.94 (23.8) 1.81 (46.0)
F437FB 1/4 NPT 10M74E8 0.75 (19.1) 1.78 (45.2) F750FB 1/4 NPT 10M124E8 1.00 (25.4) 2.31 (58.7)
F437FB 3/8 NPT 10M76E8 1.00 (25.4) 1.91 (48.4) F750FB 3/8 NPT 10M126E8 1.00 (25.4) 2.18 (55.5)
F437FB 1/2 NPT 10M78E8 1.18 (30.1) 2.16 (54.8) F750FB 1/2 NPT 10M128E8 1.18 (30.1) 2.69 (68.3)
F437FB 3/4 NPT F750FB 3/4 NPT 10M1212E8 1.38 (35.1) 2.69 (68.3)
F437FB 1 NPT F750FB 1 NPT 10M1216E8 1.88 (47.6) 3.18 (81.0)
Flat Top
F562FB W125 15M92E1 0.63 (15.9) 1.44 (36.5) F562FT W125 15M92R1 0.75 (19.1) 0.94 (23.9)
F562FB SW250 6M94E2 0.75 (19.1) 2.06 (52.4) F562FT SW250 6M94R2 0.75 (19.1) 1.50 (38.1)
F562FB SW375 6M96E2 0.75 (19.1) 2.25 (57.2) F562FT SW375 6M96R2 0.75 (19.1) 1.50 (38.1)
F562FB SW500 4M98E2 1.00 (25.4) 2.18 (55.5) F562FT SW500 4M98R2 1.00 (25.4) 1.63 (41.3)
F562FB SF250CX 15M94E6 0.63 (15.9) 1.81 (46.0) F562FT SF250CX 15M94R6 0.75 (19.1) 1.25 (31.8)
F562FB SF375CX 15M96E6 0.75 (19.1) 2.06 (52.4) F562FT SF375CX 15M96R6 0.75 (19.1) 1.50 (38.1)
F562FB SF562CX 15M99E6 1.00 (25.4) 1.18 (30.1) F562FT SF562CX 15M99R6 1.00 (25.4) 1.63 (41.3)
F562FB SF750CX 15M912E6 1.38 (35.1) 2.81 (71.4) F562FT SF750CX
F562FB SF1000CX F562FT SF1000CX
F562FB F1000C43 F562FT F1000C43
F562FB F250C 15M94E3 0.81 (20.6) 1.94 (49.2) F562FT F250C 15M94R3 0.75 (19.1) 1.25 (31.8)
F562FB F312C150 F562FT F312C150
F562FB F375C 15M96E3 1.00 (25.4) 2.44 (61.9) F562FT F375C 15M96R3 1.00 (25.4) 1.50 (38.1)
F562FB F562C F562FT F562C 15M99R3 1.38 (35.1) 1.75 (44.5)
F562FB F562C40 F562FT F562C40
F562FB 1/8 NPT 10M92E8 0.63 (15.9) 1.94 (49.2) F562FT 1/8 NPT 10M92R8 0.75 (19.1) 1.25 (31.8)
F562FB 1/4 NPT 10M94E8 0.75 (19.1) 2.18 (55.5) F562FT 1/4 NPT 10M94R8 0.75 (19.1) 1.44 (36.5)
F562FB 3/8 NPT 10M96E8 1.00 (25.4) 2.31 (58.7) F562FT 3/8 NPT 10M96R8 0.94 (23.8) 1.56 (39.7)
F562FB 1/2 NPT 10M98E8 1.18 (30.1) 1.63 (41.3) F562FT 1/2 NPT 10M98R8 1.18 (30.1) 2.00 (50.8)
F562FB 3/4 NPT 10M912E8 1.38 (35.1) 2.06 (52.4) F562FT 3/4 NPT
F562FB 1 NPT 10M916E8 1.88 (47.6) 2.25 (57.2) F562FT 1 NPT

Maximum pressure rating is based on the lowest rating of any

component. Actual working pressure may be determined by
tubing pressure rating, if lower.

Note: For pressure rating see selection chart. A A

Hex Hex
All Dimensions for reference only and subject to change.

For prompt service, Parker Autoclave Engineers stocks select

products. Consult factory. B B
Flat Bottom Flat Top

8 All general terms and conditions of sale, including limitations of our liability, apply to all products and services sold.
National Pipe Thread (NPT)
Male End Dimension inches (mm) Male End Dimension inches (mm)
Female Catalog Female Catalog
Fits this Fits this
End Number A Hex B End Number A Hex B
Connection Connection

1/8 NPT W125 15M22N1 0.50 (12.7) 1.00 (25.4) 3/8 NPT W125 15M62N1 0.75 (19.1) 1.13 (28.6)
1/8 NPT SW250 15M24N2 0.63 (15.9) 1.25 (31.8) 3/8 NPT SW250 15M64N2 0.75 (19.1) 1.38 (35.1)
1/8 NPT SW375 15M26N2 0.75 (19.1) 1.44 (36.5) 3/8 NPT SW375 15M66N2 0.75 (19.1) 1.50 (38.1)
1/8 NPT SW500 10M28N2 1.00 (25.4) 1.50 (38.1) 3/8 NPT SW500 10M68N2 1.00 (25.4) 1.75 (44.5)
1/8 NPT SF250CX 15M24N6 0.63 (15.9) 1.81 (46.0) 3/8 NPT SF250CX 15M64N6 0.75 (19.1) 1.38 (35.1)
1/8 NPT SF375CX 15M26N6 0.75 (19.1) 1.38 (35.1) 3/8 NPT SF375CX 15M66N6 0.75 (19.1) 1.50 (38.1)
1/8 NPT SF562CX 15M29N6 1.00 (25.4) 1.75 (44.5) 3/8 NPT SF562CX 15M69N6 1.00 (25.4) 1.75 (44.5)
1/8 NPT SF750CX 3/8 NPT SF750CX 15M612N6 1.38 (35.1) 2.00 (50.8)
1/8 NPT SF1000CX 3/8 NPT SF1000CX 15M616N6 1.75 (44.5) 2.88 (73.0)
1/8 NPT F1000C43 3/8 NPT F1000C43
1/8 NPT F250C 15M24N3 0.75 (19.1) 1.25 (31.8) 3/8 NPT F250C 15M64N3 0.75 (19.1) 1.38 (35.1)
1/8 NPT F312C150 3/8 NPT F312C150
1/8 NPT F375C 15M26N3 1.00 (25.4) 1.50 (38.1) 3/8 NPT F375C 15M66N3 1.00 (25.4) 1.63 (41.3)
1/8 NPT F562C 15M29N3 1.38 (35.1) 1.63 (41.3) 3/8 NPT F562C 15M69N3 1.38 (35.1) 1.75 (44.5)
1/8 NPT F562C40 3/8 NPT F562C40 15M69N40 1.38 (35.1) 1.75 (44.5)
1/8 NPT 1/8 NPT 3/8 NPT 1/8 NPT
1/8 NPT 1/4 NPT 15M24N8 0.75 (19.1) 1.38 (35.1) 3/8 NPT 1/4 NPT 15M64N8 0.75 (19.1) 1.63 (41.3)
1/8 NPT 3/8 NPT 3/8 NPT 3/8 NPT
1/8 NPT 1/2 NPT 3/8 NPT 1/2 NPT 15M68N8 1.18 (30.1) 2.25 (57.2)
1/8 NPT 3/4 NPT 3/8 NPT 3/4 NPT
1/8 NPT 1 NPT 3/8 NPT 1 NPT

1/4 NPT W125 15M42N1 0.63 (15.9) 1.13 (28.6) 1/2 NPT W125 15M82N1 1.00 (25.4) 2.50 (63.5)
1/4 NPT SW250 15M44N2 0.63 (15.9) 1.38 (35.1) 1/2 NPT SW250 15M84N2 1.00 (25.4) 1.63 (41.3)
1/4 NPT SW375 15M46N2 0.75 (19.1) 1.50 (38.1) 1/2 NPT SW375 15M86N2 1.00 (25.4) 1.63 (41.3)
1/4 NPT SW500 10M48N2 1.00 (25.4) 1.75 (44.5) 1/2 NPT SW500 10M88N2 1.00 (25.4) 1.88 (47.6)
1/4 NPT SF250CX 15M44N6 0.63 (15.9) 1.38 (35.1) 1/2 NPT SF250CX 15M84N6 1.00 (25.4) 1.38 (35.1)
1/4 NPT SF375CX 15M46N6 0.75 (19.1) 1.56 (39.7) 1/2 NPT SF375CX 15M86N6 1.00 (25.4) 1.63 (41.3)
1/4 NPT SF562CX 15M49N6 1.00 (25.4) 1.75 (44.5) 1/2 NPT SF562CX 15M89N6 1.00 (25.4) 1.94 (49.2)
1/4 NPT SF750CX 15M412N6 1.38 (35.1) 2.25 (57.2) 1/2 NPT SF750CX 15M812N6 1.38 (35.1) 2.18 (55.5)
1/4 NPT SF1000CX 15M416N6 1.75 (44.5) 2.88 (73.0) 1/2 NPT SF1000CX 15M816N6 1.75 (44.5) 2.81 (71.4)
1/4 NPT SF1500CX 15M424N6 2.25 (57.15) 3.48 (88.39) 1/2 NPT F1000C43
1/4 NPT F1000C43 1/2 NPT F250C 15M84N3 1.00 (25.4) 1.50 (38.1)
1/4 NPT F250C 15M44N3 0.75 (19.1) 1.38 (35.1) 1/2 NPT F312C150
1/4 NPT F312C150 15M45N3 1.00 (25.4) 2.50 (63.5) 1/2 NPT F375C 15M86N3 1.00 (25.4) 1.75 (44.5)
1/4 NPT F375C 15M46N3 1.00 (25.4) 1.63 (41.3) 1/2 NPT F562C 15M89N3 1.38 (35.1) 1.88 (47.6)
1/4 NPT F562C 15M49N3 1.38 (35.1) 1.75 (44.5) 1/2 NPT F562C40 15M89N40 1.38 (35.1) 1.75 (44.5)
1/4 NPT F562C40 1/2 NPT 1/8 NPT
1/4 NPT 1/8 NPT 15M42N8 0.63 (15.9) 1.38 (35.1) 1/2 NPT 1/4 NPT 15M84N8 1.00 (25.4) 1.75 (44.5)
1/4 NPT 1/4 NPT 1/2 NPT 3/8 NPT 15M86N8 1.00 (25.4) 1.81 (71.4)
1/4 NPT 3/8 NPT 15M46N8 1.00 (25.4) 1.75 (44.5) 1/2 NPT 1/2 NPT
1/4 NPT 1/2 NPT 15M48N8 1.18 (30.1) 2.25 (57.2) 1/2 NPT 3/4 NPT 10M812N8 1.38 (35.1) 2.25 (57.2)
1/4 NPT 3/4 NPT 1/2 NPT 1 NPT
1/4 NPT 1 NPT

*Maximum pressure rating is based on the lowest rating of any For prompt service, Parker Autoclave Engineers stocks
component. Actual working pressure may be determined by select products. Consult factory.
tubing pressure rating, if lower.

Note: For pressure rating see selection chart.

A
All Dimensions for reference only and subject to change. Hex

All general terms and conditions of sale, including limitations of our liability, apply to all products and services sold. 9
National Pipe Thread (NPT)

Male End Dimension inches (mm) Male End Dimension inches (mm)
Female Catalog Female Catalog
Fits this Fits this
End Number A Hex B End Number A Hex B
Connection Connection

3/4 NPT W125 1 NPT W125

3/4 NPT SW250 10M124N2 1.18 (30.1) 1.75 (44.5) 1 NPT SW250
3/4 NPT SW375 10M126N2 1.18 (30.1) 1.75 (44.5) 1 NPT SW375 10M166N2 1.38 (35.1) 1.75 (44.5)
3/4 NPT SW500 10M128N2 1.18 (30.1) 1.75 (44.5) 1 NPT SW500 10M168N2 1.38 (35.1) 1.75 (44.5)
3/4 NPT SF250CX 10M124N6 1.18 (30.1) 1.75 (44.5) 1 NPT SF250CX
3/4 NPT SF375CX 10M126N6 1.18 (30.1) 1.75 (44.5) 1 NPT SF375CX 10M166N6 1.38 (35.1) 2.00 (50.8)
3/4 NPT SF562CX 10M129N6 1.38 (35.1) 2.00 (50.8) 1 NPT SF562CX 10M169N6 1.38 (35.1) 2.25 (57.2)
3/4 NPT SF750CX 10M1212N6 1.38 (35.1) 2.25 (57.2) 1 NPT SF750CX 10M1612N6 1.38 (35.1) 2.63 (66.7)
3/4 NPT SF1000CX 10M1216N6 1.75 (44.5) 2.88 (73.0) 1 NPT SF1000CX 10M1616N6 1.75 (44.5) 3.06 (77.8)
3/4 NPT F1000C43 1 NPT F1000C43
3/4 NPT F250C 10M124N3 1.18 (30.1) 1.75 (44.5) 1 NPT F250C
3/4 NPT F312C150 1 NPT F312C150
3/4 NPT F375C 10M126N3 1.18 (30.1) 2.00 (50.8) 1 NPT F375C 10M166N3 1.38 (35.1) 2.00 (50.8)
3/4 NPT F562C 10M129N3 1.38 (35.1) 2.13 (54.0) 1 NPT F562C 10M169N3 1.38 (35.1) 2.25 (57.2)
3/4 NPT F562C40 1 NPT F562C40
3/4 NPT 1/8 NPT 10M122N8 1.18 (30.1) 1.63 (41.3) 1 NPT 1/8 NPT
3/4 NPT 1/4 NPT 10M124N8 1.18 (30.1) 1.63 (41.3) 1 NPT 1/4 NPT
3/4 NPT 3/8 NPT 1 NPT 3/8 NPT
3/4 NPT 1/2 NPT 1 NPT 1/2 NPT 10M168N8 1.38 (35.1) 2.25 (57.2)
3/4 NPT 3/4 NPT 1 NPT 3/4 NPT
3/4 NPT 1 NPT 1 NPT 1 NPT

Note: For pressure rating see selection chart.

All Dimensions for reference only and subject to change.

NOTE: NPT (Pipe) connections

NPT threads must be sealed using a high quality PTFE tape and/or
PTFE paste product. Refer to thread sealant manufacturers instructions
on how to apply thread sealant.
Sealing performance may vary based on many factors such as pressure, A
temperature, media, thread quality, thread material, proper thread Hex
engagement and proper use of thread sealant.
Customer should limit the number of times an NPT fitting is assembled
and disassembled because thread deformation during assembly will
result in deteriorating seal quality over time. When using only PTFE tape, B
consider using thread lubrication to prevent galling of mating parts.

10 All general terms and conditions of sale, including limitations of our liability, apply to all products and services sold.
Adapters/Couplings - Couplings

The couplings shown here permit the joining of any combina-

tion of standard size tubing or tubing and standard pipe with
female-to-female couplings. Other couplings available on
special order.

Pressure Rating - The pressure rating of Parker Autoclave

"A" "B"
Engineers couplings is based on the lower rated connection CONNECTION CONNECTION
FEMALE FEMALE
used.

How to use the Ordering Chart below: Note: Special material couplings may be supplied with four flats in place of
1. Locate A connection in the vertical column. standard hex.

2. Locate the desired B connection across the top of the chart.

3. The catalog number of the required coupling is located at the intersection of the two columns.

A B Connection
Connection SpeedBite Medium Pressure High Pressure
Tube 1/8 1/4 3/8 1/2** 1/4 3/8 9/16 3/4 1 1 1/4 3/8 9/16 9/16 5/16
Outside Connector Pressure W SW SW SW SF SF SF SF SF F F F F F F
in (mm) Type psi 125 250 375 500 250 375 562 750 1000 1000 250 375 562 562 312
(bar)* CX CX CX CX CX C43 C C C C40 C150

1/8 W125 15,000 15F 6F 6F 4F 15F 15F 15F 15F 15F 15F 15F
(3.18) (1034) 2211 2412 2612 2812 2416 2616 2916 21616 2413 2613 2913

1/4 SW250 15,000 6F 6F 4F 6F 6F 6F 6F 6F 6F

SpeedBite

(6.35) (1034) 4422 4622 4822 4426 4626 4926 4423 4623 4923

3/8 SW375 15,000 6F 4F 6F 6F 6F 6F 6F 6F 6F 6F

(9.52) (1034) 6622 6822 6426 6626 6926 61226 61626 6423 6623 6923

1/2 SW500 10,000 4F 4F 4F 4F 4F 4F 4F 4F 4F

(12.70) (690) 8822 8426 8626 8926 81226 81626 8423 8623 8923

1/4 SF250 20,000 20FX 20F 20F 20F 20F 20F 20F 20F 20F 20F
(6.35) CX (1379) 4466 4666 4966 41266 41666 41663 4463 4663 4963 4563

3/8 SF375 20,000 20FX 20F 20F 20F 20F 20F 20F 20F 20F
Medium Pressure

(9.52) CX (1379) 6666 6966 61266 61666 61663 6463 6663 6963 6563

9/16 SF562 20,000 20FX 20F 20F 20F 20F 20F 20F
(14.27) CX (1379) 9966 91266 91666 9463 9663 9963 9563

3/4 SF750 20,000 20FX 20F 20F 20F 20F 20F

(19.05) CX (1379) 12 121666 12463 12663 12963 12563

1 SF1000 20,000 20FX 20F 20F 20F 20F

(25.40) CX (1379) 16 16463 16663 16963 16563

1 F1000 43,000 43F

(25.40) C43 (2965) 16

1/4 F250 60,000 43F 60F 60F 60F 60F

(6.35) C (4137) 41633 4433 4633 4933 4533
High Pressure

3/8 F375 60,000 43F 60F 60F 60F

(9.52) C (4137) 61633 6633 6933 6533

9/16 F562 60,000 43F 60F 60F

(14.27) C (4137) 91633 9933 9533

9/16 F562 40,000 40F

(14.27) C40 (2760) 9933

5/16 F312 15,000 150F

(7.92) C150 (1034) 5533

1/8 NPT 15,000 15F 15F 15F 10F 15F 15F 15F 15F 15F 15F 15F 15F
(3.18) (1034) 2281 2482 2682 2882 2486 2686 2986 21286 2483 2683 2983 2583
National Pipe Thread (NPT)

1/4 NPT 15,000 15F 15F 15F 10F 15F 15F 15F 15F 15F 15F 15F 15F 15F
(6.35) (1034) 4281 4482 4682 4882 4486 4686 4986 41286 41686 4483 4683 4983 4583

3/8 NPT 15,000 15F 15F 15F 10F 15F 15F 15F 15F 15F 15F 15F 15F 15F
(9.52) (1034) 6281 6482 6682 6882 6486 6686 6986 61286 61686 6483 6683 6983 6583

1/2 NPT 15,000 15F 15F 15F 10F 15F 15F 15F 15F 15F 15F 15F 15F 15F
(12.70) (1034) 8281 8482 8682 8882 8486 8686 8986 81286 81686 8483 8683 8983 8583

3/4 NPT 10,000 10F 10F 10F 10F 10F 10F

(19.05) (1034) 12882 12686 12986 121286 121686 12983

1 NPT 10,000 10F 10F 10F 10F

(25.40) (1034) 16986 161686 16483 16983

*Maximum pressure rating is based on the lowest rating of any component. All dimensions for reference only and subject to change.
Actual working pressure may be determined by tubing pressure rating, if lower. For prompt service, Parker Autoclave Engineers stocks select products. Consult your local
**1/2 low pressure rated to 10,000 psi. representative.CAUTION: See appropriate pressure section in reference to proper selection of tubing.

All general terms and conditions of sale, including limitations of our liability, apply to all products and services sold. 11
Coupling Dimensions - Speedbite

Connection Connection Catalog Dimension inches (mm) Connection Connection Catalog Dimension inches (mm)
A B Number A Hex B A B Number A Hex B

W125 W125 15F2211 0.50 (12.7) 1.25 (31.7) SW375 SW375 6F6622 0.75 (19.1) 1.75 (44.5)
W125 SW250 6F2412 0.63 (15.9) 1.44 (36.6) SW375 SW500 4F6822 1.00 (25.4) 1.88 (47.8)
W125 SW375 6F2612 0.75 (19.1) 1.50 (38.1) SW375 SF250CX 6F6426 0.75 (19.1) 0.88 (22.2)
W125 SW500 4F2812 1.00 (25.4) 1.63 (41.4) SW375 SF375CX 6F6626 0.75 (19.1) 1.75 (44.5)
W125 SF250CX 15F2416 0.63 (15.9) 1.38 (35.1) SW375 SF562CX 6F6926 1.00 (25.4) 2.00 (50.8)
W125 SF375CX 15F2616 0.75 (19.1) 1.50 (38.1) SW375 SF750CX 6F61226 1.38 (35.1) 2.25 (57.2)
W125 SF562CX 15F2916 1.00 (25.4) 1.75 (44.5) SW375 SF1000CX 6F61626 1.75 (44.5) 3.00 (76.2)
W125 SF1000CX 15F21616 1.75 (44.5) 2.75 (69.9) SW375 F250C 6F6423 0.75 (19.1) 1.63 (41.4)
W125 F250C 15F2413 0.75 (19.1) 1.25 (31.7) SW375 F375C 6F6623 1.00 (25.4) 1.81 (46.0)
W125 F375C 15F2613 1.00 (25.4) 1.50 (38.1) SW375 F562C 6F6923 1.38 (35.1) 2.00 (50.8)
W125 F562C 15F2913 1.38 (35.1) 1.75 (44.5)
SW500 SW500 4F8822 1.00 (25.4) 2.00 (50.8)
SW250 SW250 6F4422 0.63 (15.9) 1.63 (41.4) SW500 SF250CX 4F8426 1.00 (25.4) 1.63 (41.4)
SW250 SW375 6F4622 0.75 (19.1) 1.69 (42.9) SW500 SF375CX 4F8626 1.00 (25.4) 1.88 (47.8)
SW250 SW500 4F4822 1.00 (25.4) 1.88 (47.8) SW500 SF562CX 4F8926 1.00 (25.4) 2.00 (50.8)
SW250 SF250CX 6F4426 0.63 (15.9) 1.63 (41.4) SW500 SF750CX 4F81226 1.38 (35.1) 2.25 (57.2)
SW250 SF375CX 6F4626 0.75 (19.1) 1.75 (44.5) SW500 SF1000CX 4F81626 1.75 (44.5) 3.00 (76.2)
SW250 SF562CX 6F4926 1.00 (25.4) 2.00 (50.8) SW500 F250C 4F8423 1.00 (25.4) 1.69 (42.9)
SW250 F250C 6F4423 0.75 (19.1) 1.50 (38.1) SW500 F375C 4F8623 1.00 (25.4) 1.88 (47.8)
SW250 F375C 6F4623 1.00 (25.4) 1.69 (42.9) SW500 F562C 4F8923 1.38 (35.1) 2.06 (52.3)
SW250 F562C 6F4923 1.38 (35.1) 2.06 (52.3)

Coupling Dimensions - Medium Pressure

Connection Connection Catalog Dimension inches (mm) Connection Connection Catalog Dimension inches (mm)
A B Number A Hex B A B Number A Hex B

SF250CX SF250CX 20FX4466 0.63 (15.9) 1.63 (41.4) SF750CX SF750CX 20FX12 1.38 (35.1) 2.50 (63.5)
SF250CX SF375CX 20F4666 0.75 (19.1) 1.75 (44.5) SF750CX SF1000CX 20F121666 1.75 (44.5) 3.00 (76.2)
SF250CX SF562CX 20F4966 1.00 (25.4) 2.00 (50.8) SF750CX F250C 20F12463 1.38 (35.1) 2.50 (63.5)
SF250CX SF750CX 20F41266 1.38 (35.1) 2.25 (57.2) SF750CX F375C 20F12663 1.38 (35.1) 2.38 (60.33)
SF250CX SF1000CX 20F41666 1.75 (44.5) 2.75 (69.9) SF750CX F562C 20F12963 1.38 (35.1) 2.75 (69.9)
SF250CX F250C 20F4463 0.75 (19.1) 1.38 (35.1) SF750CX F312C150 20F12563 1.38 (35.1) 2.75 (69.9)
SF250CX F375C 20F4663 1.00 (25.4) 1.63 (41.4)
SF250CX F562C 20F4963 1.38 (35.1) 1.88 (47.8) SF1000CX SF1000CX 20FX16 1.75 (44.5) 3.50 (88.9)
SF250CX F312C150 20F4563 1.00 (25.4) 2.13 (54.1) SF1000CX F250C 20F16463 1.75 (44.5) 2.75 (69.9)
SF250CX F1000C43 43F41663 1.75 (44.5) 2.75 (69.9) SF1000CX F375C 20F16663 1.75 (44.5) 2.88 (73.0)
SF1000CX F562C 20F16963 1.75 (44.5) 3.25 (82.6)
SF375CX SF375CX 20FX6666 0.75 (19.1) 1.75 (44.5) SF1000CX F312C150 20F16563 1.75 (44.5) 3.25 (82.6)
SF375CX SF562CX 20F6966 1.00 (25.4) 2.00 (50.8)
SF375CX SF750CX 20F61266 1.38 (35.1) 2.25 (57.2)
SF375CX SF1000CX 20F61666 1.75 (44.5) 2.88 (73.0)
SF375CX F250C 20F6463 0.75 (19.1) 1.63 (41.4)
SF375CX F375C 20F6663 1.00 (25.4) 2.00 (50.8)
SF375CX F562C 20F6963 1.38 (35.1) 2.00 (50.8) A
SF375CX F312C150C 20F6563 1.00 (25.4) 2.25 (57.2) HEX
SF375CX F1000C43 43F61663 1.75 (44.5) 2.88 (73.0)

SF562CX SF562CX 20FX9966 1.00 (25.4) 2.13 (54.1) B

SF562CX SF750CX 20F91266 1.38 (35.1) 2.50 (63.5)
SF562CX SF1000CX 20F91666 1.75 (44.5) 3.00 (76.2) Maximum pressure rating is based on the lowest rating of any component.
SF562CX F250C 20F9463 1.00 (25.4) 2.00 (50.8) Actual working pressure may be determined by tubing pressure rating, if lower.
Note: For pressure rating see selection chart.
SF562CX F375C 20F9663 1.00 (25.4) 2.00 (50.8)
All dimensions for reference only and subject to change.
SF562CX F562C 20F9963 1.38 (35.1) 2.25 (57.2) For prompt service, Parker Autoclave Engineers stocks select products.
SF562CX F312C150C 20F9563 1.00 (25.4) 2.50 (63.5) Consult your local representative.

12 All general terms and conditions of sale, including limitations of our liability, apply to all products and services sold.
Coupling Dimensions - High Pressure

Connection Connection Dimension inches (mm)

Catalog
A B Number A Hex B

F250C F250C 60F4433 0.75 (19.1) 1.38 (35.1)

F250C F375C 60F4633 1.00 (25.4) 1.63 (41.4) A
F250C F562C 60F4933 1.38 (35.1) 1.75 (44.5) HEX
F250C F312C150 60F4533 1.00 (25.4) 2.00 (50.8)
F250C F1000C43 43F41633 1.75 (44.5) 2.75 (69.9)
B
F375C F375C 60F6633 1.00 (25.4) 1.75 (44.5)
F375C F562C 60F6933 1.38 (35.1) 2.00 (50.8)
F375C F312C150 60F6533 1.00 (25.4) 2.25 (57.2)
F375C F1000C43 43F61633 1.75 (44.5) 2.88 (73.0)

F562C F562C 60F9933 1.38 (35.1) 2.19 (55.6)

F562C40 F562C40 40F9933 1.38 (35.1) 2.19 (55.6)
F562C F312C150 60F9533 1.19 (30.1) 2.63 (66.7)
F562C SF1000C43 43F91633 1.75 (44.5) 3.75 (82.6)

F312C150 F312C150 150F5533 1.38 (35.1) 2.50 (63.5)

F1000C43 F1000C43 43F16 1.75 (44.5) 3.50 (88.9)

Coupling Dimensions - National Pipe Thread (NPT)

Connection Connection Catalog Dimension inches (mm) Connection Connection Catalog Dimension inches (mm)
A B Number A Hex B A B Number A Hex B

1/8 NPT W125 15F2281 0.63 (15.9) 1.38 (35.1) 1/4 NPT W125 15F4281 0.75 (19.1) 1.50 (38.1)
1/8 NPT SW250 15F2482 0.63 (15.9) 1.50 (38.1) 1/4 NPT SW250 15F4482 0.75 (19.1) 1.63 (41.4)
1/8 NPT SW375 15F2682 0.75 (19.1) 1.63 (41.4) 1/4 NPT SW375 15F4682 0.75 (19.1) 1.75 (44.5)
1/8 NPT SW500 10F2882 1.00 (25.4) 1.50 (38.1) 1/4 NPT SW500 10F4882 1.00 (25.4) 2.00 (50.8)
1/8 NPT SF250CX 15F2486 0.63 (15.9) 1.38 (35.1) 1/4 NPT SF250CX 15F4486 0.75 (19.1) 1.63 (41.4)
1/8 NPT SF375CX 15F2686 0.75 (19.1) 1.50 (38.1) 1/4 NPT SF375CX 15F4686 0.75 (19.1) 1.75 (44.5)
1/8 NPT SF562CX 15F2986 1.00 (25.4) 1.63 (41.4) 1/4 NPT SF562CX 15F4986 1.00 (25.4) 2.00 (50.8)
1/8 NPT SF750CX 15F21286 1.38 (35.1) 1.75 (44.5) 1/4 NPT SF750CX 15F41286 1.38 (35.1) 1.75 (44.5)
1/8 NPT F250C 15F2483 0.75 (19.1) 1.38 (35.1) 1/4 NPT SF1000CX 15F41686 1.38 (35.1) 2.38 (60.33)
1/8 NPT F375C 15F2683 1.00 (25.4) 1.63 (41.4) 1/4 NPT F250C 15F4483 0.75 (19.1) 1.63 (41.4)
1/8 NPT F562C 15F2983 1.38 (35.1) 1.82 (46.2) 1/4 NPT F375C 15F4683 1.00 (25.4) 1.88 (47.8)
1/8 NPT F312C150 15F2583 1.00 (25.4) 2.13 (54.1) 1/4 NPT F562C 15F4983 1.38 (35.1) 2.00 (50.8)
1/4 NPT F312C150 15F4583 1.00 (25.4) 2.50 (63.5)
Maximum pressure rating is based on the lowest rating of any component.
Actual working pressure may be determined by tubing pressure rating, if lower.
Note: For pressure rating see selection chart.

All dimensions for reference only and subject to change.

For prompt service, Parker Autoclave Engineers stocks select products. Consult your local
representative.

A
HEX

All general terms and conditions of sale, including limitations of our liability, apply to all products and services sold. 13
Coupling Dimensions - National Pipe Thread (NPT) - cont

Connection Connection Catalog Dimension inches (mm) Connection Connection Catalog Dimension inches (mm)
A B Number A Hex B A B Number A Hex B

3/8 NPT W125 15F6281 1.00 (25.4) 1.63 (41.1) 3/4 NPT SW500 10F12882 1.38 (35.1) 2.50 (63.5)
3/8 NPT SW250 15F6482 1.00 (25.4) 1.75 (44.5) 3/4 NPT SF375CX 10F12686 1.38 (35.1) 2.25 (57.2)
3/8 NPT SW375 15F6682 1.00 (25.4) 1.88 (47.8) 3/4 NPT SF562CX 10F12986 1.38 (35.1) 2.25 (57.2)
3/8 NPT SW500 10F6882 1.00 (25.4) 2.00 (50.8) 3/4 NPT SF750CX 10F121286 1.50 (38.1) 2.63 (66.7)
3/8 NPT SF250CX 15F6486 0.94 (23.9) 1.63 (41.4) 3/4 NPT SF1000CX 10F121686 1.75 (44.5) 3.00 (76.2)
3/8 NPT SF375CX 15F6686 0.94 (23.9) 1.82 (46.2) 3/4 NPT F562C 10F12983 1.38 (35.1) 2.38 (60.33)
3/8 NPT SF562CX 15F6986 1.00 (25.4) 2.00 (50.8)
3/8 NPT SF750CX 15F61286 1.38 (35.1) 2.38 (60.33) 1 NPT SF562CX 10F16986 1.75 (44.5) 2.63 (66.7)
3/8 NPT SF1000CX 15F61686 1.75 (44.5) 2.50 (63.5) 1 NPT SF1000CX 10F161686 1.75 (44.5) 2.88 (73.0)
3/8 NPT F250C 15F6483 1.00 (25.4) 1.63 (41.4) 1 NPT F250C 10F16483 1.88 (47.8) 2.38 (60.33)
3/8 NPT F375C 15F6683 1.00 (25.4) 1.88 (47.8) 1 NPT F562C 10F16983 1.75 (44.5) 2.50 (63.5)
3/8 NPT F562C 15F6983 1.38 (35.1) 2.00 (50.8)
3/8 NPT F312C150 15F6583 1.00 (25.4) 2.25 (57.2

1/2 NPT W125 15F8281 1.88 (47.8) 2.00 (50.8)

1/2 NPT SW250 15F8482 1.88 (47.8) 2.13 (54.1)
1/2 NPT SW375 15F8682 1.88 (47.8) 2.13 (54.1)
1/2 NPT SW500 10F8882 1.19 (30.1) 2.25 (57.2) A
1/2 NPT SF250CX 15F8486 1.19 (30.1) 2.00 (50.8) HEX
1/2 NPT SF375CX 15F8686 1.19 (30.1) 2.13 (54.1)
1/2 NPT SF562CX 15F8986 1.19 (30.1) 2.25 (57.2)
1/2 NPT SF750CX 15F81286 1.38 (35.1) 2.63 (66.7) B
1/2 NPT SF1000CX 15F81686 1.75 (44.5) 3.00 (76.2)
1/2 NPT F250C 15F8483 1.19 (30.1) 2.00 (50.8)
1/2 NPT F375C 15F8683 1.19 (30.1) 2.13 (54.1)
1/2 NPT F562C 15F8983 1.38 (35.1) 2.50 (63.5)
1/2 NPT F312C150 15F8583 1.19 (30.1) 2.50 (63.5)

Maximum pressure rating is based on the lowest rating of any component.

Actual working pressure may be determined by tubing pressure rating, if lower.
Note: For pressure rating see selection chart.

All dimensions for reference only and subject to change.

For prompt service, Parker Autoclave Engineers stocks select products. Consult your local representa-
tive.

NOTE: NPT (Pipe) connections

NPT threads must be sealed using a high quality PTFE tape and/or
PTFE paste product. Refer to thread sealant manufacturers instructions
on how to apply thread sealant.
Sealing performance may vary based on many factors such as pressure,
temperature, media, thread quality, thread material, proper thread
engagement and proper use of thread sealant.
Customer should limit the number of times an NPT fitting is assembled
and disassembled because thread deformation during assembly will
result in deteriorating seal quality over time. When using only PTFE tape,
consider using thread lubrication to prevent galling of mating parts.

14 All general terms and conditions of sale, including limitations of our liability, apply to all products and services sold.
Adapters/Couplings - Male/Male Adapters

Parker Autoclave Engineers standard male-to-male one piece

adapters are available in low, medium, and high pressure
configurations. Standard male-to-male adapters are machined
from cold worked stainless steel. Other materials are avail-
able upon request. Contact your local Sales Representative
for optional information. The following tables list our standard
adapters with dimensions.

Adapter End Configuration

L Low Pressure H High Pressure RH Reverse High

Pressure

M Medium Pressure P National Pipe Tapered

Ordering Procedure

Typical catalog number: 20 MA M6 H9

20 MA M6 H9
Pressure Male Available End Connections
(X 1000 psi) Adapter

L2 - 1/8 Low Pressure M4 - 1/4 Medium Pressure H4 - 1/4 High Pressure P4 - 1/4 NPT * RH9 - 9/16 -18 Reverse High
L4 - 1/4 Low Pressure M6 - 3/8 Medium Pressure H5 - 5/16 High Pressure P6 - 3/8 NPT RH12 - 3/4 -16 Reverse High
L6 - 3/8 Low Pressure M9 - 9/16 Medium Pressure H6 - 3/8 High Pressure P8 - 1/2 NPT RH14 - 7/8 -14 Reverse High
L8 - 1/2 Low Pressure M12 - 3/4 Medium Pressure H9 - 9/16 High Pressure P12 - 3/4 NPT RH16 - 1 -12 Reverse High
M16 - 1 Medium Pressure P16 - 1 NPT RH21 - 1-5/16 -12 Reverse High

Note: Special material one piece adapters may be supplied with four flats in place of standard hex.
*RH9 & RH14 - 40,000 psi (2758 bar), RH12 - 30,000 psi (2068 bar), RH16 - 26,000 psi (1793 bar), RH21 - 20,000 psi (1379 bar).

All general terms and conditions of sale, including limitations of our liability, apply to all products and services sold. 15
Low-Pressure to Low-Pressure Adapters
Catalog Connection Connection Dimension inches (mm)
Number L/P L/P A Hex B

15MAL2L2 W125 W125 0.50 (12.7) 1.38 (34.9) A

15MAL2L4 W125 SW250 0.63 (15.9) 1.63 (41.3)
15MAL4L4 SW250 SW250 0.63 (15.9) 1.88 (47.6)
10MAL6L8 SW375 SW500 1.00 (25.4) 2.25 (57.1) B
10MAL8L8 SW500 SW500 1.00 (25.4) 2.13 (54.0)

Low-Pressure to Medium-Pressure Adapters

Catalog Connection Connection Dimension inches (mm)

Number L/P M/P A Hex B
A
15MAL4M4 SW250 SF250CX 0.63 (15.9) 1.86 (47.3)
10MAL8M9 SW500 SF562CX 1.00 (25.4) 2.44 (62.0)
B

Low-Pressure to High-Pressure Adapters

Catalog Connection Connection Dimension inches (mm)

Number L/P H/P A Hex B
A

15MAL2H4 W125 F250C 0.63 (15.9) 1.63 (41.3)

15MAL2H6 W125 F375C 0.90 (25.4) 2.00 (50.8) B

Medium-Pressure to Medium-Pressure Adapters

Catalog Connection Connection Dimension inches (mm)

Number M/P M/P A Hex B

20MAM4M4 SF250CX SF250CX 0.50 (12.7) 1.69 (42.9)

20MAM4M6 SF250CX SF375CX 0.63 (15.9) 1.88 (47.6)
20MAM4M9 SF250CX SF562CX 0.94 (23.8) 2.38 (60.3) A
20MAM4M12 SF250CX SF750CX 1.19 (30.1) 2.69 (68.2)
20MAM4M16 SF250CX SF1000CX 1.38 (34.9) 3.38 (85.7)
20MAM6M6 SF375CX SF375CX 0.63 (15.9) 2.25 (57.1)
20MAM6M9 SF375CX SF562CX 0.94 (23.8) 2.38 (60.3) B
20MAM6M12 SF375CX SF750CX 1.19 (30.1) 2.81 (71.4)
20MAM6M16 SF375CX SF1000CX 1.38 (34.9) 3.38 (85.7)
20MAM9M9 SF562CX SF562CX 0.94 (23.8) 2.50 (63.5)
20MAM9M12 SF562CX SF750CX 1.19 (30.1) 3.00 (76.2)
20MAM9M16 SF562CX SF1000CX 1.38 (34.9) 3.69 (93.72)
20MAM12M12 SF750CX SF750CX 1.19 (30.1) 3.13 (79.3)
20MAM12M16 SF750CX SF1000CX 1.38 (34.9) 3.81 (96.8)
20MAM16M4 SF1000CX SF250CX 1.38 (34.9) 3.25 (82.6)
20MAM16M16 SF1000CX SF1000CX 1.38 (34.9) 4.38 (111.1)

Medium-Pressure to High-Pressure Adapters

Catalog Connection Connection Dimension inches (mm)

Number M/P H/P A Hex B
20MAM4H4 SF250CX F250C 0.63 (15.9) 1.75 (44.5) A
20MAM4H6 SF250CX F375C 0.81 (20.6) 2.13 (54.0)
20MAM4H9 SF250CX F562C 1.19 (30.1) 2.63 (66.7)
20MAM6H4 SF375CX F250C 0.63 (15.9) 1.94 (49.2)
20MAM6H6 SF375CX F375C 0.81 (20.6) 2.38 (60.3) B
20MAM6H9 SF375CX F562C 1.19 (30.1) 2.69 (68.2)
20MAM9H4 SF562CX F250C 0.81 (20.6) 2.25 (57.1)
Maximum pressure rating is based on the lowest rating of any component.
20MAM9H6 SF562CX F375C 0.81 (20.6) 2.56 (65.0) Actual working pressure may be determined by tubing pressure rating, if lower.
20MAM9H9 SF562CX F562C 1.19 (30.1) 2.94 (74.6)
20MAM12H4 SF750CX F250C 1.19 (30.1) 2.63 (66.7) Note: For pressure rating see ordering procedure.
All Dimensions for reference only and subject to change.
20MAM12H6 SF750CX F375C 1.19 (30.1) 2.88 (73.0)
20MAM12H9 SF750CX F562C 1.19 (30.1) 3.00 (76.2)
For prompt service, Parker Autoclave Engineers stocks select products. Consult factory.
20MAM16H4 SF1000CX F250C 1.38 (34.9) 3.25 (82.6)
20MAM16H6 SF1000CX F375C 1.38 (34.9) 3.50 (89.0)
20MAM16H9 SF1000CX F562C 1.38 (34.9) 3.69 (93.6)

16 All general terms and conditions of sale, including limitations of our liability, apply to all products and services sold.
High-Pressure to High-Pressure Adapters

Catalog Dimension inches (mm)

Connection Connection
Number H/P H/P A Hex B

40MAH9H9 F562C40 F562C40 1.19 (30.1) 2.94 (74.6) A

60MAH4H4 F250C F250C 0.63 (15.9) 1.69 (42.8)
60MAH4H5 F250C F312C150 0.75 (19.1) 2.63 (66.7)
60MAH4H6 F250C F375C 0.81 (20.6) 2.13 (54.0)
60MAH4H9 F250C F562C 1.19 (30.1) 2.56 (65.0) B
60MAH5H6 F312C150 F375C 0.81 (20.6) 2.81 (71.4)
60MAH6H6 F375C F375C 0.81 (20.6) 2.25 (57.1)
60MAH6H9 F375C F562C 1.19 (30.1) 2.88 (73.0)
60MAH9H9 F562C F562C 1.19 (30.1) 3.00 (76.2)
150MAH5H5 F312C150 F312C150 0.75 (19.1) 3.38 (85.7)

Low-Pressure to NPT Adapters

Catalog Connection Connection Dimension inches (mm)

Number L/P NPT A Hex B

15MAL2P2 W125 1/8 0.50 (12.7) 1.38 (34.9) A

15MAL2P4 W125 1/4 0.63 (15.9) 1.63 (41.2)
15MAL2P8 W125 1/2 1.00 (25.4) 2.13 (54.0)
15MAL4P8 SW250 1/2 1.00 (25.4) 2.25 (57.1)
15MAL4P2 SW250 1/8 0.63 (15.9) 1.63 (41.2) B
15MAL4P4 SW250 1/4 0.63 (15.9) 1.75 (44.5)
15MAL6P4 SW375 1/4 0.75 (19.1) 1.88 (47.6)
15MAL6P8 SW375 1/2 1.00 (25.4) 2.25 (57.1)
10MAL8P6 SW500 3/8 1.00 (25.4) 2.00 (50.0)
10MAL8P8 SW500 1/2 1.00 (25.4) 2.31 (58.7)
10MAL8P12 SW500 3/4 1.19 (30.1) 2.38 (60.3)

Medium-Pressure to NPT Adapters

Catalog Connection Connection Dimension inches (mm)

Number M/P NPT A Hex B

15MAM4P4 SF250CX 1/4 0.63 (15.9) 1.75 (44.5)

A
15MAM4P6 SF250CX 3/8 0.75 (19.1) 1.81 (46.2)
15MAM4P8 SF250CX 1/2 0.94 (23.8) 2.19 (55.5)
15MAM6P4 SF375CX 1/4 0.63 (15.9) 1.94 (49.1)
15MAM6P6 SF375CX 3/8 0.75 (19.1) 2.00 (50.8) B
15MAM6P8 SF375CX 1/2 0.94 (23.8) 2.38 (60.3)
15MAM9P4 SF562CX 1/4 0.81 (20.6) 2.25 (57.1)
15MAM9P6 SF562CX 3/8 0.81 (20.6) 2.13 (54.0)
15MAM9P8 SF562CX 1/2 0.94 (23.8) 2.56 (65.0) NOTE: NPT (Pipe) connections
10MAM9P12 SF562CX 3/4 1.19 (30.1) 2.75 (69.9) NPT threads must be sealed using a high quality PTFE tape and/or
10MAM9P16 SF562CX 1 1.38 (34.9) 3.00 (76.2) PTFE paste product. Refer to thread sealant manufacturers instructions
on how to apply thread sealant.
15MAM12P4 SF750CX 1/4 1.19 (30.1) 2.63 (66.7) Sealing performance may vary based on many factors such as pressure,
15MAM12P6 SF750CX 3/8 1.19 (30.1) 2.63 (66.7) temperature, media, thread quality, thread material, proper thread
15MAM12P8 SF750CX 1/2 1.19 (30.1) 2.81 (71.4) engagement and proper use of thread sealant.
Customer should limit the number of times an NPT fitting is assembled
10MAM12P12 SF750CX 3/4 1.19 (30.1) 2.81 (71.4) and disassembled because thread deformation during assembly will
10MAM12P16 SF750CX 1 1.19 (30.1) 2.81 (71.4) result in deteriorating seal quality over time. When using only PTFE tape,
15MAM16P4 SF1000CX 1/4 1.38 (34.9) 3.38 (85.7) consider using thread lubrication to prevent galling of mating parts.
15MAM16P6 SF1000CX 3/8 1.38 (34.9) 3.31 (84.1) Maximum pressure rating is based on the lowest rating of any component.
15MAM16P8 SF1000CX 1/2 1.38 (34.9) 3.44 (87.3) Actual working pressure may be determined by tubing pressure rating, if lower.
Note: For pressure rating see ordering procedure.
10MAM16P12 SF1000CX 3/4 1.50 (38.1) 3.75 (95.3) All Dimensions for reference only and subject to change.
10MAM16P16 SF1000CX 1 1.50 (38.1) 4.00 (101.6) For prompt service, Parker Autoclave Engineers stocks select products. Consult factory.

All general terms and conditions of sale, including limitations of our liability, apply to all products and services sold. 17
High-Pressure to NPT Adapters

Catalog Connection Connection Dimension inches (mm)

Number H/P NPT A Hex B

15MAH4P4 F250C 1/4 0.63 (15.9) 1.81 (46.2) A

15MAH4P6 F250C 3/8 0.75 (19.1) 1.88 (47.6)
15MAH4P8 F250C 1/2 0.94 (23.8) 2.25 (57.1)
15MAH6P4 F375C 1/4 0.81 (20.6) 2.13 (54.0)
15MAH6P6 F375C 3/8 0.81 (20.6) 2.13 (54.0) B
15MAH6P8 F375C 1/2 0.94 (23.8) 2.50 (63.5)
15MAH9P4 F562C 1/4 1.19 (30.1) 2.63 (66.7)
15MAH9P6 F562C 3/8 1.19 (30.1) 2.56 (65.0)
15MAH9P8 F562C 1/2 1.19 (30.1) 2.75 (69.9)

NPT to NPT Adapters

Catalog Connection Connection Dimension inches (mm)

Number NPT NPT A Hex B

15MAP4P4 1/4 1/4 0.63 (15.9) 1.81 (46.2)

A
15MAP4P6 1/4 3/8 0.75 (19.1) 1.88 (47.6)
15MAP4P8 1/4 1/2 0.94 (23.8) 2.31 (58.7)
15MAP6P6 3/8 3/8 0.75 (19.1) 1.88 (47.6)
15MAP6P8 3/8 1/2 0.94 (23.8) 2.31 (58.7) B
15MAP8P8 1/2 1/2 0.94 (23.8) 2.50 (63.5)

Medium-Pressure to Reverse High-Pressure Adapters

Catalog Connection Connection Dimension inches (mm)

Number M/P RH A Hex B

20MAM4RH9 SF250CX 9/16 0.63 (15.9) 1.56 (39.7) A

20MAM4RH12 SF250CX 3/4 0.81 (20.6) 1.88 (47.6)
20MAM4RH16 SF250CX 1 1.00 (25.4) 2.13 (54.0)
20MAM6RH9 SF375CX 9/16 0.63 (15.9) 1.69 (42.8)
20MAM6RH12 SF375CX 3/4 0.81 (20.6) 1.81 (46.2) B
20MAM6RH16 SF375CX 1 1.00 (25.4) 2.25 (57.1)
20MAM9RH9 SF562CX 9/16 0.94 (23.8) 2.00 (50.8)
20MAM9RH12 SF562CX 3/4 0.94 (23.8) 2.13 (54.0)
20MAM9RH14 SF562CX 7/8 0.94 (23.8) 2.44 (61.9)
20MAM9RH16 SF562CX 1 1.00 (25.4) 2.25 (57.1) NOTE: NPT (Pipe) connections
20MAM9RH21 SF562CX 1-5/16 1.38 (34.9) 2.38 (60.3) NPT threads must be sealed using a high quality PTFE tape and/or
20MAM12RH9 SF750CX 9/16 1.19 (30.1) 2.38 (60.3) PTFE paste product. Refer to thread sealant manufacturers instructions
on how to apply thread sealant.
20MAM12RH12 SF750CX 3/4 1.19 (30.1) 2.44 (61.9)
Sealing performance may vary based on many factors such as pressure,
20MAM12RH16 SF750CX 1 1.19 (30.1) 2.50 (63.5) temperature, media, thread quality, thread material, proper thread
20MAM12RH21 SF750CX 1-5/16 1.50 (38.1) 2.75 (69.9) engagement and proper use of thread sealant.
Customer should limit the number of times an NPT fitting is assembled
20MAM16RH9 SF1000CX 9/16 1.38 (34.9) 3.13 (79.3)
and disassembled because thread deformation during assembly will
20MAM16RH12 SF1000CX 3/4 1.38 (34.9) 3.19 (80.9) result in deteriorating seal quality over time. When using only PTFE tape,
20MAM16RH14 SF1000CX 7/8 1.38 (34.9) 3.34 (84.9) consider using thread lubrication to prevent galling of mating parts.
20MAM16RH16 SF1000CX 1 1.38 (34.9) 3.38 (85.7)
20MAM16RH21 SF1000CX 1-5/16 1.50 (38.1) 3.25 (82.6)
Maximum pressure rating is based on the lowest rating of any component.
Actual working pressure may be determined by tubing pressure rating, if lower.
Note: For pressure rating see ordering procedure.
All Dimensions for reference only and are subject to change.
For prompt service, Parker Autoclave Engineers stocks select products. Consult factory.

18 All general terms and conditions of sale, including limitations of our liability, apply to all products and services sold.
High-Pressure to Reverse High-Pressure Adapters

Catalog Connection Connection Dimension inches (mm)

Number H/P RH A Hex B

26MAH4RH16 F250C 1 1.00 (25.4) 2.13 (54.0) A

26MAH6RH16 F375C 1 1.00 (25.4) 2.25 (57.1)
26MAH9RH16 F562C 1 1.19 (30.1) 2.69 (68.2)
30MAH4RH12 F250C 3/4 0.81 (20.6) 1.88 (47.6)
30MAH6RH12 F375C 3/4 0.81 (20.6) 2.06 (54.0)
30MAH9RH12 F562C 3/4 1.19 (30.1) 2.50 (63.5) B
40MAH4RH9 F250C 9/16 0.63 (15.9) 1.56 (39.7)
40MAH6RH9 F375C 9/16 0.81 (20.6) 1.94 (49.1)
40MAH9RH9 F562C 9/16 1.19 (30.1) 2.38 (60.3)

Reverse High-Pressure to Reverse High-Pressure Adapters

Catalog Connection Connection Dimension inches (mm)

Number RH RH A Hex B

20MARH21RH21 1-5/16 1-5/16 1.38 (34.9) 2.13 (54.1) A

26MARH9RH16 9/16 1 1.00 (25.4) 1.88 (47.6)
26MARH12RH16 3/4 1 1.00 (25.4) 2.00 (50.8)
26MARH16RH16 1 1 1.00 (25.4) 2.00 (50.8)
30MARH9RH12 9/16 3/4 0.81 (20.6) 1.63 (41.2)
30MARH12RH12 3/4 3/4 0.81 (20.6) 1.75 (44.5) B
40MARH9RH9 9/16 9/16 0.63 (15.9) 1.50 (38.1)

NPT to Reverse High-Pressure Adapters

Catalog Connection Connection Dimension inches (mm)

Number NPT RH A Hex B

15MAP4RH9 1/4 9/16 0.63 (15.9) 1.63 (41.2)

A
15MAP4RH12 1/4 3/4 0.81 (20.6) 1.88 (47.6)
15MAP4RH16 1/4 1 1.00 (25.4) 2.25 (57.1)
15MAP6RH9 3/8 9/16 0.75 (19.1) 1.81 (46.2)
15MAP6RH12 3/8 3/4 0.81 (20.6) 1.94 (49.1)
15MAP6RH16 3/8 1 1.00 (25.4) 2.13 (54.0) B
15MAP8RH9 1/2 9/16 0.94 (23.8) 2.00 (50.8)
15MAP8RH12 1/2 3/4 0.94 (23.8) 2.13 (54.0)
Maximum pressure rating is based on the lowest rating of any component.
15MAP8RH14 1/2 7/8 1.00 (25.4) 2.25 (57.1) Actual working pressure may be determined by tubing pressure rating, if lower.
15MAP8RH16 1/2 1 1.00 (25.4) 2.31 (58.7)
Note: For pressure rating see ordering procedure.
10MAP12RH12 3/4 3/4 1.19 (30.1) 2.31 (58.7)
All Dimensions for reference only and are subject to change.
10MAP12RH16 3/4 1 1.38 (34.9) 2.63 (66.7)
10MAP12RH21 3/4 1-5/16 1.38 (34.9) 2.63 (66.7) For prompt service, Parker Autoclave Engineers stocks select products. Consult factory.
10MAP16RH9 1 9/16 1.38 (34.9) 2.25 (57.2)
10MAP16RH16 1 1 1.38 (34.9) 2.81 (71.4)
10MAP16RH21 1 1-5/16 1.38 (34.9) 2.68 (68.0)

All general terms and conditions of sale, including limitations of our liability, apply to all products and services sold. 19
QSS Male/Female Adapters
Male /female adapters are designed to adapt a female connec- Materials
tion to another size and/or type of connection without the need All Parker Autoclave Engineers adapters are precision ma-
for additional couplings. In selecting an adapter involving two chined from cold-worked Type 316 stainless steel.
different sized connections, the larger connection should be
on the male end where it is possible to maximize the mechani-
cal strength of the adapter.

To use this chart:

1. Locate MALE end in vertical column.
2. Locate desired FEMALE end of adapter across top of chart.
3. Catalog number of required adapter is located at
intersection of columns.
4. For one piece adapter add-OP to suffix of part number.

FEMALE END
Quick Set Medium Pressure
Connection
Size and Type 1/4 3/8 9/16 3/4 1/4 3/8 9/16 3/4 1
QS250 QS375 QS562 QS750 SF250CX SF375CX SF562CX SF750CX SF1000CX

15,000
1/4 QS250 (1034.20) 15M46QQ 15M49QQ 15M412QQ 15M44Q6 15M46Q6 15M49Q6 15M412Q6 15M416Q6
15,000
Quick Set

3/8 QS375 (1034.20) 15M64QQ 15M69QQ 15M612QQ 15M64Q6 15M66Q6 15M69Q6 15M612Q6 15M616Q6
15,000
9/16 QS562 (1034.20) 15M94QQ 15M94QQ 15M912QQ 15M94Q6 15M96Q6 15M99Q6 15M912Q6 15M916Q6
15,000
3/4 QS750 (1034.20) 15M124QQ 15M126QQ 15M129QQ 15M124Q6 15M126Q6 15M129Q6 15M1212Q6 15M1216Q6
20,000
1/4 SF250CX (1378.93) 15M44KQ 15M46KQ 15M49KQ 15M412KQ
Medium Pressure

20,000
MALE END

3/8 SF375CX (1378.93) 15M64KQ 15M66KQ 15M69KQ 15M612KQ

20,000
9/16 SF562CX (1378.93) 15M94KQ 15M96KQ 15M99KQ 15M912KQ
20,000
3/4 SF750CX (1378.93) 15M124KQ 15M126KQ 15M129KQ 15M1212KQ

20,000
1 SF1000CX (1378.93) 15M164KQ 15M166KQ 15M169KQ 15M1612KQ
60,000
High Pressure

1/4 F250C (4136.85) 15M44BQ 15M46BQ 15M49BQ 15M412BQ

60,000
3/8 F375C (4136.85) 15M64BQ 15M66BQ 15M69BQ 15M612BQ
60,000
9/16 F562C (4136.85) 15M94BQ 15M96BQ 15M99BQ 15M912BQ
15,000
1/4 NPT 15M44NQ 15M46NQ 15M49NQ 15M412NQ
National Pipe Thread (NPT)

(1034.20)
15,000
3/8 NPT (1034.20) 15M64NQ 15M66NQ 15M69NQ 15M612NQ
15,000
1/2 NPT (689.45) 15M84NQ 15M86NQ 15M89NQ 15M812NQ
10,000
3/4 NPT (689.45) 10M124NQ 10M126NQ 10M129NQ 10M1212NQ
10,000
1 NPT (689.45) 10M164NQ 10M166NQ 10M169NQ 10M1612NQ

Note:
All Parker Autoclave Engineers adapters are supplied complete with appropriate gland nuts and sleeves
unless specified without. NOTE: NPT (Pipe) connections
* The maximum pressure rating for an adapter is determined by the connection component with the
LOWEST pressure rating; that is, the two end connections and the tubing or pipe used, whichever is
NPT threads must be sealed using a high quality PTFE tape and/or
LOWER. PTFE paste product. Refer to thread sealant manufacturers instructions
CAUTION: See appropriate pressure section in reference to proper selection of tubing. on how to apply thread sealant.
Sealing performance may vary based on many factors such as pressure,
temperature, media, thread quality, thread material, proper thread
engagement and proper use of thread sealant.
Customer should limit the number of times an NPT fitting is assembled
and disassembled because thread deformation during assembly will
result in deteriorating seal quality over time. When using only PTFE
tape, consider using thread lubrication to prevent galling of mating parts.

20
Quick Set Female Quick Set Female Quick Set Female Quick Set Female
to to to to
Quick Set Male Medium Pressure Male High Pressure Male National Pipe Male

FEMALE END
High Pressure National Pipe Thread (NPT)
1/4 3/8 9/16 1/4 3/8 1/2 3/4 1
F250C F375C F562C NPT NPT NPT NPT NPT
60,000 60,000 150,000 15,000 15,000 15,000 10,000 10,000
(4136.85) (4136.85) (10342.14) (1034.20) (1034.20) (1034.20) (689.45) (689.45)

15M44Q3 15M46Q3 15M49Q3 15M44Q8 15M46Q8 15M48Q8 10M412Q8 10M416Q8

15M64Q3 15M66Q3 15M69Q3 15M64Q8 15M66Q8 15M68Q8 10M612Q8 10M616Q8

15M94Q3 15M96Q3 15M99Q3 15M94Q8 15M96Q8 15M98Q8 10M912Q8 10M916Q8

15M124Q3 15M126Q3 15M129Q3 15M124Q8 15M126Q8 15M128Q8 10M1212Q8 10M1216Q8

AE Male/Female Adapters are available in a one-piece design. They are identical to the two piece designs in
length and can be ordered by adding the suffix - OP to the two piece adapter part numbers listed.

For prompt service, Parker Autoclave Engineers stocks select products. Consult factory.factory.

21
QS Series

Male End Dimension inches (mm) Male End Dimension inches (mm)
Female Catalog Female Catalog
Fits this Fits this
End Number A Hex B End Number A Hex B
Connection Connection

QS250 QS250 QS562 QS250 15M94QQ 1.00 (25.4) 1.85 (46.8)

QS250 QS375 15M46QQ QS562 QS375 15M96QQ 1.00 (25.4) 1.85 (46.8)
QS250 QS562 15M49QQ 1.38 (34.9) 2.25 (57.1) QS562 QS562
QS250 QS750 15M412QQ QS562 QS750 15M912QQ 1.50 (38.1) 3.16 (80.3)
QS250 SF250CX 15M44Q6 QS562 SF250CX 15M94Q6
QS250 SF375CX 15M46Q6 QS562 SF375CX 15M96Q6
QS250 SF562CX 15M49Q6 QS562 SF562CX 15M99Q6
QS250 SF750CX 15M412Q6 QS562 SF750CX 15M912Q6
QS250 SF1000CX 15M416Q6 QS562 SF1000CX 15M916Q6
QS250 F250C 15M44Q3 QS562 F250C 15M94Q3
QS250 F375C 15M46Q3 QS562 F375C 15M96Q3
QS250 F562C 10M49Q3 QS562 F562C 15M99Q3
QS250 1/4 NPT 15M44Q8 0.75 (19.1) 1.69 (42.9) QS562 1/4 NPT 15M94Q8 1.19 (30.1) 2.22 (56.4)
QS250 3/8 NPT 15M46Q8 QS562 3/8 NPT 15M96Q8 1.19 (30.1) 2.22 (56.4)
QS250 1/2 NPT 15M48Q8 QS562 1/2 NPT 15M98Q8 1.19 (30.1) 2.41 (61.1)
QS250 3/4 NPT 10M412Q8 QS562 3/4 NPT 10M912Q8
QS250 1 NPT 10M416Q8 QS562 1 NPT 10M916Q8

QS375 QS250 15M64QQ 0.75 (19.1) 1.53 (38.9) QS750 QS250 15M124QQ
QS375 QS375 QS750 QS375 15M126QQ 1.50 (38.1) 2.53 (64.1)
QS375 QS562 15M69QQ QS750 QS562 15M129QQ 1.50 (38.1) 2.53 (64.1)
QS375 QS750 15M612QQ 1.50 (38.1) 2.78 (70.6) QS750 QS750
QS375 SF250CX 15M64Q6 QS750 SF250CX 15M124Q6
QS375 SF375CX 15M66Q6 0.75 (19.1) 1.66 (42.2) QS750 SF375CX 15M126Q6
QS375 SF562CX 15M69Q6 1.00 (25.4) 1.78 (45.2) QS750 SF562CX 15M129Q6
QS375 SF750CX 15M612Q6 QS750 SF750CX 15M1212Q6
QS375 SF1000CX 15M616Q6 QS750 SF1000CX 15M1216Q6
QS375 F250C 15M64Q3 QS750 F250C 15M124Q3
QS375 F375C 15M66Q3 QS750 F375C 15M126Q3
QS375 F562C 15M69Q3 QS750 F562C 15M129Q3
QS375 1/4 NPT 15M64Q8 0.75 (19.1) 1.66 (42.2) QS750 1/4 NPT 15M124Q8
QS375 3/8 NPT 15M66Q8 1.00 (25.4) 1.78 (45.3) QS750 3/8 NPT 15M126Q8
QS375 1/2 NPT 15M68Q8 1.19 (30.1) 2.16 (54.8) QS750 1/2 NPT 15M128Q8 1.50 (38.1) 2.78 (70.5)
QS375 3/4 NPT 10M612Q8 QS750 3/4 NPT 10M1212Q8
QS375 1 NPT 10M616Q8 QS750 1 NPT 10M1216Q8
For prompt service, Parker Autoclave Engineers stocks select products. Consult factory. Maximum pressure rating is based on the lowest rating of any component.
Actual working pressure may be determined by tubing pressure rating, if lower.
Note: For pressure rating see selection chart.
All Dimensions for reference only and subject to change.

QSS to Pipe QSS to QSS

A A
HEX HEX

B B

22
QS Series

Male End Dimension inches (mm) Male End Dimension inches (mm)
Female Catalog Female Catalog
Fits this Fits this
End Number A Hex B End Number A Hex B
Connection Connection

SF250CX QS250 15M44KQ 0.75 (19.1) 1.68 (42.7) F250C QS250 15M44BQ 0.75 (19.1) 1.31 (33.3)
SF250CX QS375 15M46KQ 0.81 (20.6) 1.68 (42.7) F250C QS375 15M46BQ 0.81 (20.6) 1.56 (39.7)
SF250CX QS562 15M49KQ 1.19 (30.1) 2.22 (56.4) F250C QS562 15M49BQ
SF250CX QS750 15M412KQ F250C QS750 15M412BQ

SF375CX QS250 15M64KQ 0.75 (19.1) 1.63 (41.4) F375C QS250 15M64BQ
SF375CX QS375 15M66KQ 0.81 (20.6) 1.81 (46.1) F375C QS375 15M66BQ 0.81 (20.6) 1.69 (42.9)
SF375CX QS562 15M69KQ F375C QS562 15M69BQ
SF375CX QS750 15M612KQ 1.50 (38.1) 3.00 (76.20) F375C QS750 15M612BQ

SF562CX QS250 15M94KQ 0.94 (23.8) 1.75 (44.5) F562C QS250 15M94BQ 1.19 (30.1) 1.81(46.1)
SF562CX QS375 15M96KQ 0.94 (23.8) 1.75 (44.5) F562C QS375 15M96BQ 1.19 (30.1) 1.69 (42.9)
SF562CX QS562 15M99KQ 1.38 (34.9) 2.50 (63.5) F562C QS562 15M99BQ 1.38 (34.9) 2.32 (58.8)
SF562CX QS750 15M912KQ 1.50 (38.1) 3.25 (82.6) F562C QS750 15M912BQ 1.50 (38.1) 3.06 (77.7)

SF750CX QS250 15M124KQ

SF750CX QS375 15M126KQ
SF750CX QS562 15M129KQ
SF750CX QS750 15M1212KQ 1.50 (38.1) 3.06 (77.7)

SF1000CX QS250 15M164KQ

SF1000CX QS375 15M166KQ
SF1000CX QS562 15M169KQ 1.50 (38.1) 2.88 (73.0)
SF1000CX QS750 15M1612KQ 1.50 (38.1) 3.38 (85.7)

MP to QSS HP to QSS

A
HEX A
HEX

B
B

Maximum pressure rating is based on the lowest rating of any component.

Actual working pressure may be determined by tubing pressure rating, if lower.
Note: For pressure rating see selection chart.
All Dimensions for reference only and subject to change.
Adapter configurations may vary from outline shown.
FFor prompt service, Parker Autoclave Engineers stocks select products. Consult factory.

23
QS Series

Male End Dimension inches (mm)

Female Catalog
Fits this
End Number A Hex B
Connection

1/4 NPT QS250 15M44NQ 0.75 (19.1) 1.44 (36.5)

1/4 NPT QS375 15M46NQ 0.81 (20.6) 1.63 (41.3)
1/4 NPT QS562 15M49NQ
1/4 NPT QS750 15M412NQ

3/8 NPT QS250 15M64NQ 0.75 (19.1) 1.50 (38.1)

3/8 NPT QS375 15M66NQ 0.81 (20.6) 1.63 (41.3)
3/8 NPT QS562 15M69NQ 1.38 (35.1) 2.13 (53.5)
3/8 NPT QS750 15M612NQ

1/2 NPT QS250 15M84NQ 0.94 (23.8) 1.75 (44.5)

1/2 NPT QS375 15M86NQ 0.94 (23.8) 1.63 (41.3)
1/2 NPT QS562 15M89NQ 1.38 (35.1) 2.25 (57.2)
1/2 NPT QS750 15M812NQ 1.50 (38.1) 2.81 (71.4)

3/4 NPT QS250 10M124NQ

3/4 NPT QS375 10M126NQ
3/4 NPT QS562 10M129NQ 1.38 (35.1) 2.38 (60.3)
3/4 NPT QS750 10M1212NQ 1.50 (38.1) 2.81 (71.4)

1 NPT QS250 10M164NQ

1 NPT QS275 10M166NQ
1 NPT QS562 10M169NQ 1.50 (38.1) 2.38 (60.3)
1 NPT QS750 10M1612NQ 1.50 (38.1) 2.38 (60.3)

NPT to QSS

A
HEX

Maximum pressure rating is based on the lowest rating of any component.

Actual working pressure may be determined by tubing pressure rating, if lower.
Note: For pressure rating see selection chart.
All Dimensions for reference only and subject to change.
Adapter configurations may vary from outline shown.
For prompt service, Parker Autoclave Engineers stocks select products. Consult factory.

24
QSS Male/Male Adapters
Parker Autoclave Engineers standard male-to-male one piece adapters are
available in multiple configurations. Standard male-to-male adapters are
machined from cold worked stainless steel.Contact your local Sales
Representative for optional information. The following tables list our
standard adapters with dimensions.

Adapter End Configuration

QS Series H High Pressure RH Reverse High

Pressure

M Medium Pressure P National Pipe Tapered

Ordering Procedure

Typical catalog number: 15 MA Q4 H9

15 MA Q4 H9
Pressure Male Available End Connections
(X 1000 psi) Adapter

Q4 - 1/4 QS Series M4 - 1/4 Medium Pressure H4 - 1/4 High Pressure P4 - 1/4 NPT * RH9 - 9/16 -18 Reverse High
Q6 - 3/8 QS Series M6 - 3/8 Medium Pressure H5 - 5/16 High Pressure P6 - 3/8 NPT RH12 - 3/4 -16 Reverse High
Q9 - 9/16 QS Series M9 - 9/16 Medium Pressure H6 - 3/8 High Pressure P8 - 1/2 NPT RH14 - 7/8 -14 Reverse High
Q12 - 3/4 QS Series M12 - 3/4 Medium Pressure H9 - 9/16 High Pressure P12 - 3/4 NPT RH16 - 1 -12 Reverse High
M16 - 1 Medium Pressure P16 - 1 NPT RH21 - 1-5/16 -12 Reverse High

*RH9 & RH14 - 40,000 psi (2758 bar), RH12 - 30,000 psi (2068 bar), RH16 - 26,000 psi (1793 bar), RH21 - 20,000 psi (1379 bar).

25
QS Series to Reverse High-Pressure Adapters

Catalog Connection Dimension inches (mm)

Connection
Number QS RH A Hex B

15MAQ4RH9 QS250 9/16 0.63 (15.9) 1.70 (43.2)

A
15MAQ6RH9 QS375 9/16 0.75 (19.1) 1.81 (46.2)
15MAQ9RH9 QS562 9/16 1.19 (30.1) 2.25 (57.1)
15MAQ9RH12 QS562 3/4 1.19 (30.1) 2.38 (60.3)
15MAQ9RH16 QS562 1 1.19 (30.1) 2.56 (65.1) B

QS Series to High-Pressure Adapter

Catalog Connection Dimension inches (mm)

Connection
Number QS H/P A Hex B

15MAQ9H4 QS562 1/4 0.75 (19.1) 2.00 (50.8)

QS Series to NPT Adapter

Catalog Connection Dimension inches (mm)

Connection
Number QS NPT A Hex B

15MAQ6P4 QS375 1/4 0.75 (19.1) 2.00 (50.8)

26
Adapters/Couplings - Male/Male JIC Adapters

Parker Autoclave Engineers male-to-male JIC one-piece adapters

are available in low, medium, and high pressure configurations.
JIC adapters are machined from cold worked stainless steel. Other
materials are available upon request. Contact your local Sales
Representative for optional information. The following tables list our
standard adapters with dimensions.

Adapter End Configuration

JIC connections consist of a 37 angle.

Ordering Procedure
Typical catalog number: 20 MA M4 J4

20 MA M4 J4
Pressure Male Available End Connections
(X 1000 psi) Adapter

*J4 - 1/4 JIC L4 - 1/4 Low Pressure M4 - 1/4 Medium Pressure H4 - 1/4 High Pressure P4 - 1/4 NPT
J6 - 3/8 JIC L6 - 3/8 Low Pressure M6 - 3/8 Medium Pressure H6 - 3/8 High Pressure P6 - 3/8 NPT
J8 - 1/2 JIC L8 - 1/2 Low Pressure M9 - 9/16 Medium Pressure H9 - 9/16 High Pressure P8 - 1/2 NPT
J10 - 5/8 JIC M12 - 3/4 Medium Pressure
J12 - 3/4 JIC M16 - 1 Medium Pressure
J16 - 1 JIC
Note: Special material one piece adapters may be supplied with four flats in place of standard hex. Thread Sizes
*J4, J6, J8 & J10 - 20,000 psi (1380 bar), J12 & J16 - 15,000 psi (1034 bar) J4 - 7/16-20
J6 - 9/16-18
J8 - 3/4-16
J10 - 7/8-14
J12 - 1-1/16-12
J16 - 1-5/16-12

All general terms and conditions of sale, including limitations of our liability, apply to all products and services sold. 27
Low-Pressure to JIC Adapters

Catalog Connection Connection Dimension inches (mm)

Number L/P JIC A Hex B
A
15MAL4J4 SW250 1/4 0.75 (19.1) 1.88 (47.6)
15MAL6J6 SW375 3/8 0.81 (20.6) 2.00 (50.8)

Medium-Pressure to JIC Adapters

Catalog Connection Connection Dimension inches (mm)

Number M/P JIC A Hex B

15MAM4J12 SF250CX 3/4 1.38 (34.9) 2.25 (57.1)

A
15MAM4J16 SF250CX 1 1.50 (38.1) 2.38 (60.3)
15MAM6J12 SF375CX 3/4 1.38 (34.9) 2.44 (61.3)
15MAM6J16 SF375CX 1 1.50 (38.1) 2.53 (64.9)
15MAM9J12 SF562CX 3/4 1.38 (34.9) 2.69 (68.2)
15MAM9J16 SF562CX 1 1.50 (38.1) 2.78 (70.6) B
15MAM12J12 SF750CX 3/4 1.38 (34.9) 2.88 (73.0)
15MAM12J16 SF750CX 1 1.50 (38.1) 2.88 (73.0)
15MAM16J12 SF1000CX 3/4 1.38 (34.9) 3.38 (85.7)
15MAM16J16 SF1000CX 1 1.50 (38.1) 3.50 (89.0)
20MAM4J4 SF250CX 1/4 0.75 (19.1) 1.63 (41.3)
20MAM4J6 SF250CX 3/8 0.81 (20.6) 1.75 (44.5)
20MAM4J8 SF250CX 1/2 1.00 (25.4) 2.00 (50.8)
20MAM6J4 SF375CX 1/4 0.75 (19.1) 1.75 (44.5)
20MAM6J6 SF375CX 3/8 0.81 (20.6) 1.81 (46.0)
20MAM6J8 SF375CX 1/2 1.00 (25.4) 2.00 (50.8)
20MAM9J4 SF562CX 1/4 0.94 (23.8) 2.13 (54.0)
20MAM9J6 SF562CX 3/8 0.94 (23.8) 2.13 (54.0)
20MAM9J8 SF562CX 1/2 1.00 (25.4) 2.25 (57.1)
20MAM9J10 SF562CX 5/8 1.19 (30.1) 2.25 (57.1)
20MAM12J4 SF750CX 1/4 1.19 (30.1) 2.38 (60.3)
20MAM12J6 SF750CX 3/8 1.19 (30.1) 2.38 (60.3)
20MAM12J8 SF750CX 1/2 1.19 (30.1) 2.50 (63.5)
20MAM16J4 SF1000CX 1/4 1.38 (34.9) 3.13 (79.3)
20MAM16J6 SF1000CX 3/8 1.38 (34.9) 3.13 (79.3)
20MAM16J8 SF1000CX 1/2 1.38 (34.9) 3.13 (79.3)

High-Pressure to JIC Adapters

Catalog Connection Connection Dimension inches (mm)

Number H/P JIC A Hex B

20MAH4J2 F250C 1/8 0.63 (15.9) 1.50 (38.1) A

20MAH4J4 F250C 1/4 0.75 (19.1) 1.63 (41.3)
20MAH4J6 F250C 3/8 0.81 (20.6) 1.63 (41.3)
20MAH4J8 F250C 1/2 1.00 (25.4) 1.88 (47.6)
20MAH6J4 F375C 1/4 0.81 (20.6) 1.94 (49.1)
20MAH6J6 F375C 3/8 0.81 (20.6) 1.94 (49.1) B
20MAH6J8 F375C 1/2 1.00 (25.4) 2.19 (55.5)
20MAH9J4 F562C 1/4 1.19 (30.1) 2.31 (58.7) Maximum pressure rating is based on the lowest rating of any component.
Actual working pressure may be determined by tubing pressure rating, if lower.
20MAH9J6 F562C 3/8 1.19 (30.1) 2.31 (58.7)
20MAH9J8 F562C 1/2 1.19 (30.1) 2.38 (60.3) Note: For pressure rating see ordering procedure.
All Dimensions for reference only and are subject to change.
20MAH4J10 F250C 5/8 1.19 (30.1) 2.13 (54.0) For prompt service, Parker Autoclave Engineers stocks select products. Consult factory.

28 All general terms and conditions of sale, including limitations of our liability, apply to all products and services sold.
JIC to JIC Adapters

Catalog Connection Connection Dimension inches (mm)

Number JIC JIC A Hex B

20MAJ4J4 1/4 1/4 0.75 (19.1) 1.56 (39.7) A

20MAJ6J6 3/8 3/8 0.81 (20.6) 1.56 (39.7)
20MAJ6J8 3/8 1/2 1.00 (25.4) 1.75 (44.5)
20MAJ8J8 1/2 1/2 1.00 (25.4) 1.81 (46.0)

NPT to JIC Adapters

Catalog Connection Connection Dimension inches (mm)

Number NPT JIC A Hex B

15MAP4J4 1/4 1/4 0.75 (19.1) 1.69 (42.8)

A
15MAP4J6 1/4 3/8 0.81 (20.6) 1.75 (44.5)
15MAP4J8 1/4 1/2 1.00 (25.4) 1.94 (49.1)
15MAP4J12 1/4 3/4 1.38 (34.9) 2.25 (57.1)
15MAP6J4 3/8 1/4 0.75 (19.1) 1.69 (42.8)
15MAP6J6 3/8 3/8 0.81 (20.6) 1.75 (44.5) B
15MAP6J8 3/8 1/2 1.00 (25.4) 1.81 (46.0)
15MAP6J12 3/8 3/4 1.38 (34.9) 2.25 (57.1) Maximum pressure rating is based on the lowest rating of any component.
15MAP8J4 1/2 1/4 0.94 (23.8) 2.00 (50.8) Actual working pressure may be determined by tubing pressure rating, if lower.

15MAP8J8 1/2 1/2 1.00 (25.4) 2.13 (54.0) Note: For pressure rating see ordering procedure.
15MAP8J12 1/2 3/4 1.38 (34.9) 2.44 (61.9)
All Dimensions for reference only and are subject to change.

For prompt service, Parker Autoclave Engineers stocks select products. Consult factory.

NOTE: NPT (Pipe) connections

NPT threads must be sealed using a high quality PTFE tape and/or
PTFE paste product. Refer to thread sealant manufacturers instructions
on how to apply thread sealant.
Sealing performance may vary based on many factors such as pressure,
temperature, media, thread quality, thread material, proper thread
engagement and proper use of thread sealant.
Customer should limit the number of times an NPT fitting is assembled
and disassembled because thread deformation during assembly will
result in deteriorating seal quality over time. When using only PTFE tape,
consider using thread lubrication to prevent galling of mating parts.

All general terms and conditions of sale, including limitations of our liability, apply to all products and services sold. 29
Adapters/Couplings - Male/Female JIC Adapters

Male /female adapters are designed to adapt a female connec-

tion to another size and/or type of connection without the need Other Adapters
for additional couplings. In selecting an adapter involving two Parker Autoclave Engineers supplies many other types of
different sized connections, the larger connection should be adapters on special order. These include Parker Autoclave
on the male end where it is possible to maximize the mechani- UniVersa-Lok swaged-type connections, socketweld to O.D.
cal strength of the adapter. tube or nominal pipe size, male or female AN connections and
others.
To use this chart:
1. Locate MALE end in vertical column. Materials
2. Locate desired FEMALE end of adapter across top of chart. All Parker Autoclave Engineers adapters are precision
3. Catalog number of required adapter is located at machined from cold-worked Type 316 stainless steel.
intersection of columns. Other materials available on special order.
4. For one piece adapter add-OP to suffix of part number Note: Special material couplings may be supplied with four flats in place of
where applicable. standard hex.

FEMALE END
JIC Medium Pressure
Connection
Size and Type 1/4 3/8 1/2 5/8 3/4 1 1/4 3/8 9/16
JIC4 JIC6 JIC8 JIC10 JIC12 JIC16 SF250CX SF375CX SF562CX

Fits this Pressure 20,000 20,000 20,000 20,000 15,000 15,000 20,000 20,000 20,000
Female Rating (1378.93) (1378.93) (1378.93) (1378.93) (1034.20) (1034.20) (1378.93) (1378.93) (1378.93)
Connection PSI (bar)*
20,000
1/4 JIC4 (1378.93) 20MFAJ4M4 20MFAJ4M6 20MFAJ4M9
20,000
3/8 JIC6 (1378.93) 20MFAJ6M4 20MFAJ6M6 20MFAJ6M9
20,000
1/2 JIC8 (1378.93) 20MFAJ8M4 20MFAJ8M6 20MFAJ8M9
JIC

20,000
5/8 JIC10 (1378.93)
15,000
3/4" JIC12 (1034.20) 15MFAJ12M4 15MFAJ12M6 15MFAJ12M9
15,000
MALE END

1" JIC16 (1034.20) 15MFAJ16M4 15MFAJ16M6 15MFAJ16M9

20,000
1/4 SF250CX (1378.93) 20MFAM4J4 20MFAM4J6
Medium Pressure

20,000
3/8 SF375CX (1378.93)
20,000
9/16 SF562CX (1378.93)
20,000
3/4 SF750CX (1378.93) 20MFAM12J4
20,000
1 SF1000CX (1378.93)
60,000
High Pressure

1/4 F250C (4136.85) 20MFAH4J4

60,000
3/8 F375C (4136.85)
60,000
9/16 F562C (4136.85)
15,000
1/4 NPT
National Pipe Thread (NPT)

(1034.20)
15,000
3/8 NPT (1034.20) 15MFAP6J6
15,000
1/2 NPT (1034.20)
10,000
3/4 NPT (689.45)
10,000
1 NPT (689.45)

Note: * The maximum pressure rating for an adapter is determined by the connection component with the
All adapters with Parker Autoclave connections are supplied with appropriate glands, collars, tube nuts LOWEST pressure rating; that is, the two end connections and the tubing or pipe used, whichever is
and sleeves unless specified without. LOWER.
JIC connections are not supplied with connection components. CAUTION: See appropriate pressure section in reference to proper selection of tubing.

30 All general terms and conditions of sale, including limitations of our liability, apply to all products and services sold.
FEMALE END
Medium Pressure High Pressure National Pipe Thread (NPT)
3/4 1 1/4 3/8 9/16 1/4 3/8 1/2 3/4" 1"
F750CX F1000CX F250C F375C F562C NPT NPT NPT NPT NPT
20,000 20,000 60,000 60,000 60,000 15,000 15,000 15,000 10,000 10,000
(1378.93) (1378.93) (4136.85) (4136.85) (4136.85) (1034.20) (1034.20) (1034.20) (689.45) (689.45)

20MFAJ4M12 20MFAJ4M16 20MFAJ4H4 20MFAJ4H6 20MFAJ4H9 15MFAJ4P4 15MFAJ4P8

20MFAJ6M12 20MFAJ6M16 20MFAJ6H6

20MFAJ8M12 20MFAJ8M16

15MFAJ12M12 15MFAJ12M16

15MFAJ16M12 15MFAJ16M16

Parker AE Male/Female Adapters are available in a one-piece design. They are identical to the two piece
designs in length and can be ordered by adding the suffix - OP to the two piece adapter part numbers listed.

For prompt service, Parker Autoclave Engineers stocks select products. Consult factory.

All general terms and conditions of sale, including limitations of our liability, apply to all products and services sold. 31
Adapters/Couplings - Male/Female JIC Adapters

Male End Dimension inches (mm)

Female Catalog
Fits this
End Number A Hex B
Connection

JIC to Medium Pressure

1/4" JIC SF250CX 20MFAJ4M4 0.63 (15.9) 1.25 (31.8)
1/4" JIC SF375CX 20MFAJ4M6 0.75 (19.1) 1.50 (38.1)
1/4" JIC SF562CX 20MFAJ4M9 1.00 (25.4) 1.88 (47.8)
1/4" JIC SF750CX 20MFAJ4M12 1.38 (35.1) 2.13 (54.0)
1/4" JIC SF1000CX 20MFAJ4M16 1.75 (44.5) 2.75 (69.9)

3/8" JIC SF250CX 20MFAJ6M4 0.63 (15.9) 1.25 (31.8)

3/8" JIC SF375CX 20MFAJ6M6 0.75 (19.1) 1.44 (36.5)
3/8" JIC SF562CX 20MFAJ6M9 1.00 (25.4) 1.88 (47.8)
3/8" JIC SF750CX 20MFAJ6M12 1.38 (35.1) 2.13 (54.0)
3/8" JIC SF1000CX 20MFAJ6M16 1.75 (44.5) 2.62 (66.5)

1/2" JIC SF250CX 20MFAJ8M4 0.81 (20.6) 1.63 (41.3)

1/2" JIC SF375CX 20MFAJ8M6 0.81 (20.6) 1.75 (44.5)
1/2" JIC SF562CX 20MFAJ8M9 1.00 (25.4) 1.88 (47.8)
1/2" JIC SF750CX 20MFAJ8M12 1.38 (35.1) 2.25 (57.2)
1/2" JIC SF1000CX 20MFAJ8M16 1.75 (44.5) 2.75 (69.9) B

3/4" JIC SF250CX 15MFAJ12M4 1.38 (35.1) 2.00 (50.8)

3/4" JIC SF375CX 15MFAJ12M6 1.38 (35.1) 2.00 (50.8)
3/4" JIC SF562CX 15MFAJ12M9 1.38 (35.1) 2.00 (50.8)
3/4" JIC SF750CX 15MFAJ12M12 1.38 (35.1) 2.25 (57.2) A
3/4" JIC SF1000CX 15MFAJ12M16 1.75 (44.5) 3.25 (82.6) Hex

1" JIC SF250CX 15MFAJ16M4 1.50 (38.1) 2.00 (50.8)

1" JIC SF375CX 15MFAJ16M6 1.50 (38.1) 2.00 (50.8)
1" JIC SF562CX 15MFAJ16M9 1.50 (38.1) 2.25 (57.2)
1" JIC SF750CX 15MFAJ16M12 1.38 (35.1) 2.62 (66.5)
1" JIC SF1000CX 15MFAJ16M16 1.75 (44.5) 3.25 (82.6)
JIC to High Pressure
1/4" JIC SF250C 20MFAJ4H4 0.75 (19.1) 1.38 (35.1)
1/4" JIC SF375C 20MFAJ4H6 1.00 (25.4) 1.50 (38.1)
1/4" JIC SF562C 20MFAJ4H9 1.38 (35.1) 2.00 (50.8)
3/8" JIC SF375C 20MFAJ6H6 1.00 (25.4) 1.50 (38.1)
JIC to NPT
1/4" JIC 1/4" NPT 15MFAJ4P4 0.94 (23.8) 1.50 (38.1)
1/4" JIC 1/2" NPT 15MFAJ4P8 1.19 (30.1) 1.88 (47.8)
Medium Pressure to JIC
SF250CX 1/4" JIC 20MFAM4J4 0.75 (19.1) 1.56 (39.7)
SF250CX 3/8" JIC 20MFAM4J6 0.81 (20.6) 1.50 (38.1)
SF750CX 1/4" JIC 20MFAJ12J4 1.19 (30.1) 2.00 (50.8)
High Pressure to JIC
F250C 1/4" JIC 20MFAH4J4 0.75 (19.1) 1.50 (38.1)
NPT to JIC
3/8" NPT 3/8" JIC 15MFAP6J6 0.81 (20.6) 1.50 (38.1)

32
Adapters/Couplings - EZ-Union Adapters

Parker Autoclave Engineers offers an EZ-Union adapter providing a

fast and simple way to install or remove components from a pres-
sure system. The face seal o-ring design provides a positive seal
with easy and reliable operation. EZ-Union adapters can be provided
with any standard or special connection combination. Optional ma-
terials available upon request. Contact your local Sales Representa-
tive for optional information and sizes not shown. The following
tables show the standard adapters with dimensions.

EZ-Union Adapter

O-Ring Seal

Female
Male Connection
Connection G
F

Nut

Ordering Procedure

Typical catalog number: 20 EZ M4 M4

20 EZ M4 M4
Pressure EZ- Male to Female "F" "G"
(X 1000 psi) EZMA- Male to Male Available End Connections

For Butt-Weld or specials contact factory. When ordering Male to Female adapters, Male connection is listed first.

M4 - 1/4 Medium Pressure H4 - 1/4 High Pressure P4 - 1/4 NPT

M6 - 3/8 Medium Pressure H6 - 3/8 High Pressure P6 - 3/8 NPT
M9 - 9/16 Medium Pressure H9 - 9/16 High Pressure P8 - 1/2 NPT
M12 - 3/4 Medium Pressure P12 - 3/4 NPT
M16 - 1 Medium Pressure P16 - 1 NPT

Note: Special material EZ-Unions may be supplied with four flats in place of standard hex.

All general terms and conditions of sale, including limitations of our liability, apply to all products and services sold. 33
EZ-Union Male to Female Adapters

Catalog Pressure Dimension inches (mm)

Male Female
Number "F" Connection "G" Connection Rating psi (bar) A B C Hex D Hex E Min Opening

20EZM4M4 SM250CX20 SF250CX20 20,000 (1379) 3.13 (79.50) 1.00 (25.40) 1.00 (25.40) 0.81 (20.57) 0.109 (2.77)
10EZM9M9 SM562CX20 SF562CX20 10,000 (690) 4.63 (117.60) 1.63 (41.40) 1.75 (44.45) 1.38 (34.93) 0.31 (7.92)
10EZM12M12 SM750CX20 SF750CX20 10,000 (690) 4.63 (117.60) 1.38 (35.05) 1.75 (44.45) 1.50 (38.10) 0.44 (11.13)
10EZM16M16 SM1000CX20 SF1000CX20 10,000 (690) 6.44 (163.58) 2.31 (58.67) 1.75 (44.45) 1.75 (44.45) 0.56 (14.27)
10EZP12M12 3/4" NPT SF750CX20 10,000 (690) 4.63 (117.60) 1.38 (35.05) 1.75 (44.45) 1.50 (38.10) 0.44 (11.13)
10EZM16P8 SM1000CX20 1/2" NPT 10,000 (690) 5.38 (136.65) 1.25 (31.75) 1.75 (44.45) 1.38 (35.05) 0.56 (14.27)

A
B

Male D
Connection C
F
Female
Connection
G

EZ-Union Male to Male Adapters

Catalog Male Male Pressure Dimension inches (mm)

Number "F" Connection "G" Connection Rating psi (bar) A B C Hex D Hex E Min Opening

20EZMAH4H6 M250C M375C 20,000 (1379) 5.94 (150.88) 3.56 (90.42) 1.00 (25.40) 0.81 (20.57) 0.09 (2.29)
10EZMAP12M12 SM750CX20 3/4" NPT 10,000 (690) 6.50 (165.10) 3.25 (82.55) 1.75 (44.45) 0.87 (22.05)* 0.44 (11.13)

Male C
Connection
F
Male
D Connection
G

Note1: EZ-Unions are constructed from 316 SS and are supplied with a Viton o-ring as standard. *across flats

Note: For pressure rating see ordering procedure.

All Dimensions for reference only and subject to change.
Note 2: Gland and collar supplied with medium and high pressure connections.

Maximum pressure rating is based on the lowest rating of any component. FFor prompt service, Parker Autoclave Engineers stocks select products. Consult factory.
Actual working pressure may be determined by tubing pressure rating, if lower.

34 All general terms and conditions of sale, including limitations of our liability, apply to all products and services sold.
Adapters/Couplings - Butt-Weld Adapters

Parker Autoclave Engineers Butt-Weld adapters are available in a

number of configurations. The following tables show models for
all three pressure ranges. Models not shown and special material
adapters are available upon request. Contact your local Sales Repre-
sentative for more information.

Butt-Weld Adapter

Butt-Weld End

Female
Connection

Note: Standard Butt-weld adapters made from 316 SS.

Butt-Weld Adapters

AE Low Pressure - Female Connection

Weld Connection Size/Schedule
Type SW250 SW375 SW500

Pipe Butt-Weld 3/4 / XXS M128W2B-XXS

AE Medium Pressure - Female Connection

Weld Connection Size/Schedule
Type SF250CX SF375CX SF562CX SF750CX SF1000CX

Pipe Butt-Weld 1/8 / 80 M24W6B-XS M26W6B-XS

Pipe Butt-Weld 1/4 / 80 M44W6B-XS M46W6B-XS M49W6B-XS
Pipe Butt-Weld 3/8 / 80 M64W6B-XS M66W6B-XS M69W6B-XS M612W6B-XS
Pipe Butt-Weld 1/2 / 80 M84W6B-XS M89W6B-XS
Pipe Butt-Weld 1/2 / XXS M89W6B-XXS M812W6B-XXS M816W6B-XXS
Pipe Butt-Weld 3/4 / 80 M129W6B-XS
Pipe Butt-Weld 3/4 / 160 M129W6B-160
Pipe Butt-Weld 3/4 / XXS M129W6B-XXS M1212W6B-XXS M1216W6B-XXS
Pipe Butt-Weld 1 / XXS M1616W6B-XXS

AE High Pressure - Female Connection

Weld Connection Size/Schedule
Type F250C F375C F562C F562C40 SF1000CX43

Pipe Butt-Weld 1 / XXS M169W3B-XXS

All general terms and conditions of sale, including limitations of our liability, apply to all products and services sold. 35
Butt-Weld to Low-Pressure

Catalog Pressure Rating Dimension inches (mm)

Male Female
Number BW LP psi bar A Hex B C

M128W2B-XXS 3/4 SW500 10,000 689.5 1.19 (30.23) 2.00 (50.80) 0.81 (20.57)

Butt-Weld to Medium-Pressure

Pressure Rating Dimension inches (mm)

Catalog Male Female
Number BW M/P psi bar A Hex B C

M24W6B-XS 1/8 SF250CX 8500 586.0 0.63 (15.88) 1.00 (25.40) 0.38 (9.53)
M26W6B-XS 1/8 SF375CX 8500 586.0 0.75 (19.05) 1.31 (33.32) 0.38 (9.53)
M44W6B-XS 1/4 SF250CX 8000 551.6 0.63 (15.88) 1.18 (29.97) 0.56 (14.27)
M46W6B-XS 1/4 SF375CX 8000 551.6 0.75 (19.05) 1.50 (38.10) 0.56 (14.27)
M49W6B-XS 1/4 SF562CX 8000 551.6 1.00 (25.40) 1.56 (39.67) 0.56 (14.27)
M64W6B-XS 3/8 SF250CX 6500 448.2 0.75 (19.05) 1.25 (31.75) 0.63 (15.88)
M66W6B-XS 3/8 SF375CX 6500 448.2 0.75 (19.05) 1.56 (39.67) 0.63 (15.88)
M69W6B-XS 3/8 SF562CX 6500 448.2 1.00 (25.40) 1.63 (41.28) 0.63 (15.88)
M612W6B-XS 3/8 SF750CX 6500 448.2 1.38 (34.93) 1.94 (49.20) 0.63 (15.88)
M84W6B-XS 1/2 SF250CX 6000 413.7 1.00 (25.40) 1.38 (34.93) 0.81 (20.57)
M86W6B-XXS 1/2" SF375CX 13000 896.3 1.00 (25.40) 1.75 (44.45) 0.81 (20.57)
M89W6B-XS 1/2 SF375CX 6000 413.7 1.00 (25.40) 1.81 (45.97) 0.81 (20.57)
M89W6B-XXS 1/2 SF562CX 10000 689.5 1.00 (25.40) 1.81 (45.97) 0.81 (20.57)
M812W6B-XXS 1/2 SF750CX 10000 689.5 1.38 (34.93) 2.13 (53.98) 0.81 (20.57)
M816W6B-XXS 1/2 SF1000CX 10000 689.5 1.75 (44.45) 2.81 (71.37) 0.81 (20.57)
M129W6B-XS 3/4 SF562CX 5000 344.7 1.19 (30.23) 1.81 (45.97) 0.81 (20.57)
M129W6B-160 3/4 SF562CX 7500 517.1 1.19 (30.23) 2.00 (50.80) 0.81 (20.57)
M129W6B-XXS 3/4 SF562CX 10000 689.5 1.19 (30.23) 2.00 (50.80) 0.81 (20.57)
M1212W6B-XXS 3/4 SF750CX 10000 689.5 1.38 (34.93) 2.06 (52.32) 0.81 (20.57)
M1216W6B-XXS 3/4 SF1000CX 10000 689.5 1.75 (44.45) 2.69 (68.25) 0.81 (20.57)
M1616W6B-XXS 1 SF1000CX 10000 689.5 1.75 (44.45) 3.25 (82.55) 1.31 (33.32)

Butt-Weld to High-Pressure

Catalog Pressure Rating Dimension inches (mm)

Male Female
Number BW LP psi bar A Hex B C

M169W3B-XXS 1 F562C 10000 689.5 1.38 (34.93) 2.44 (61.90) 1.22 (30.99)

B
C

Gland and collar supplied with high pressure connections. Note: For pressure rating see ordering procedure.
All Dimensions for reference only and are subject to change.
Maximum pressure rating is based on the lowest rating of any component. For prompt service, Parker Autoclave Engineers stocks select products. Consult factory.
Actual working pressure may be determined by piping pressure rating, contact factory.

36 All general terms and conditions of sale, including limitations of our liability, apply to all products and services sold.
Adapters/Couplings - Header Couplings

Parker Autoclave Engineers offers weld style Header Couplings in a

number of designs and materials. The standard materials are SAE-
4130 and Inconel 625. Other materials are listed in the tables. Header
couplings are available drilled through or blind drilled, allowing final
drill through after welding. The couplings can be supplied with any style
of Parker Autoclave Engineers connection or special connections if re-
quired. Header couplings come standard with 316 SS glands and collars
for our medium and high-pressure connections. Models not shown are
available upon request. Contact your local sales representative.

Header Coupling

37.5

Ordering Procedure

Typical catalog number: HC F M16 W 625 DT

Option

HC F M16 W 625 DT
Header Female Available Welded Drilled
Coupling Connection End Connections Through
SAE 4130 - 4130
Inconel 625 - 625
2205 Duplex - 2205
316 SS - 316
A105 - 105
A105N - 105 Normalized

M4 - 1/4 Medium Pressure H4 - 1/4 High Pressure P4 - 1/4 NPT

M6 - 3/8 Medium Pressure H6 - 3/8 High Pressure P6 - 3/8 NPT
M9 - 9/16 Medium Pressure H9 - 9/16 High Pressure P8 - 1/2 NPT
M12 - 3/4 Medium Pressure P12 - 3/4 NPT
M16 - 1 Medium Pressure P16 - 1 NPT

All general terms and conditions of sale, including limitations of our liability, apply to all products and services sold. 37
Female Medium-Pressure Header Coupling Blind End

Catalog Dimension inches (mm)

Pressure Female
Number Material psi (bar) M/P A Flats B C D E

HCFM12W316 316 SS 10,000 (690) SF750CX20 1.75 (44.45) 3.00 (76.2) 1.05 (26.7) 1.32 (33.5) 0.44 (11.2)
HCFM12W105 SA-105 10,000 (690) SF750CX20 1.75 (44.45) 3.00 (76.2) 1.05 (26.7) 1.32 (33.5) 0.44 (11.2)
HCFM12W4130 SAE-4130 20,000 (1379) SF750CX20 1.75 (44.45) 3.00 (76.2) 1.05 (26.7) 1.32 (33.5) 0.44 (11.2)
HCFM12W2205 2205 Duplex 15,000 (1034) SF750CX20 1.75 (44.45) 3.00 (76.2) 1.05 (26.7) 1.32 (33.5) 0.44 (11.2)
HCFM16W316 316 SS 10,000 (690) SF1000CX20 1.75 (44.45) 2.62 (66.55) 1.00 (25.40) 1.38 (34.93) 0.56 (14.27)
HCFM16W2205 2205 Duplex 15,000 (1034) SF1000CX20 1.75 (44.45) 3.00 (76.2) 1.05 (26.7) 1.31 (33.27) 0.56 (14.27)

Female High-Pressure Header Coupling Blind End

Catalog Dimension inches (mm)

Pressure Female
Number Material psi (bar) H/P A Flats B C D E

HCFH9W316 316SS 30,000 (2068) F562C 1.50 (38.10) 2.31 (58.67) 1.19 (30.18) 1.31 (33.27) 0.19 (4.75)
HCFH9W4130 SAE-4130 30,000 (2068) F562C 1.50 (38.10) 2.31 (58.67) 1.19 (30.18) 1.31 (33.27) 0.19 (4.75)
HCFH9W625 Inconel 625 30,000 (2068) F562C 1.50 (38.10) 2.31 (58.67) 1.19 (30.18) 1.31 (33.27) 0.19 (4.75)
HCFH16W4130 SAE-4130 20,000 (1379) F1000C43 1.75 (44.45) 3.00 (76.20) 1.05 (26.59) 1.32 (33.53) 0.44 (11.10)
HCFH16W625 Inconel 625 22,000 (1551) F1000C43 1.75 (44.45) 3.00 (76.20) 1.05 (26.59) 1.32 (33.53) 0.44 (11.10)

E
A D

Gland and collar supplied with high pressure connections. All Dimensions for reference only and are subject to change.
For prompt service, Parker Autoclave Engineers stocks select products. Consult factory.
Maximum pressure rating is based on the lowest rating of any component.
Actual working pressure may be determined by tubing pressure rating, if lower.

38 All general terms and conditions of sale, including limitations of our liability, apply to all products and services sold.
Female Medium-Pressure Header Coupling Drill Through

Catalog Dimension inches (mm)

Pressure Female
Number Material psi (bar) M/P A Flats B C D E

HCFM4W316DT 316 SS 10,000 (690) SF250CX20 0.63 (16.0)* 1.19 (30.2) 0.56 (14.3) 0.54 (13.6) 0.11 (2.8)
HCFM9W316DT 316 SS 10,000 (690) SF562CX20 1.38 (35.1)* 2.44 (62.0) 1.13 (28.6) 1.32 (33.5) 0.36 (9.1)
HCFM9W4130DT SAE-4130 25,000 (1724) SF562CX20 1.38 (35.1) 2.44 (62.0) 1.13 (28.6) 1.32 (33.5) 0.36 (9.1)
HCFM12W4130DT SAE-4130 20,000 (1379) SF750CX 1.38 (35.1) 2.63 (66.68) 1.05 (26.7) 1.32 (33.5) 0.44 (11.2)
HCFM12W2205DT 2205 duplex 15,000 (1034) SF750CX20 1.75 (44.45) 3.00 (76.20) 1.05 (26.7) 1.32 (33.5) 0.44 (11.2)
HCFM16W316DT 316 SS 10,000 (690) SF1000CX20 1.75 (44.45) 3.00 (76.20) 1.05 (26.7) 1.32 (33.5) 0.56 (14.2)
HCFM16W316LDT 316L SS 10,000 (690) SF1000CX20 1.75 (44.45) 3.00 (76.20) 1.05 (26.7) 1.32 (33.5) 0.56 (14.2)
HCFM16W4130DT SAE-4130 20,000 (1379) SF1000CX20 1.75 (44.45) 3.00 (76.20) 1.05 (26.7) 1.32 (33.5) 0.56 (14.2)
HCFM16W105DT SA-105 12,000 (827) SF1000CX20 1.75 (44.45) 3.00 (76.20) 1.05 (26.7) 1.32 (33.5) 0.56 (14.2)
HCFM16W2205DT 2205 duplex 15,000 (1034) SF1000CX20 1.75 (44.45) 3.00 (76.20) 1.05 (26.7) 1.32 (33.5) 0.56 (14.2)
HCFM16W625DT Inconel 625 15,000 (1034) SF1000CX20 1.75 (44.45) 3.00 (76.20) 1.05 (26.7) 1.32 (33.5) 0.56 (14.2)
*across hex

Female High-Pressure Header Coupling Drill Through

Catalog Dimension inches (mm)

Pressure Female
Number Material psi (bar) H/P A Flats B C D E

HCFH9W316DT 316SS 30,000 (2068) F562C 1.50 (38.10) 2.31 (58.67) 1.19 (30.18) 1.31 (33.27) 0.19 (4.75)
HCFH9W4130DT SAE-4130 30,000 (2068) F562C 1.50 (38.10) 2.31 (58.67) 1.19 (30.18) 1.31 (33.27) 0.19 (4.75)
HCFH9W625DT Inconel 625 30,000 (2068) F562C 1.50 (38.10) 2.31 (58.67) 1.19 (30.18) 1.31 (33.27) 0.19 (4.75)
HCFH16W4130DT SAE-4130 20,000 (1379) F1000C43 1.75 (44.45) 3.00 (76.20) 1.05 (26.59) 1.32 (33.53) 0.44 (11.10)
HCFH16W625DT Inconel 625 22,000 (1551) F1000C43 1.75 (44.45) 3.00 (76.20) 1.05 (26.59) 1.32 (33.53) 0.44 (11.10)

B
C
E

A D

Gland and collar supplied with high pressure adapters. Note: For pressure rating see ordering procedure.

Maximum pressure rating is based on the lowest rating of any component. All Dimensions for reference only and are subject to change.
Actual working pressure may be determined by tubing pressure rating, if lower.
For prompt service, Parker Autoclave Engineers stocks select products. Consult
factory.

All general terms and conditions of sale, including limitations of our liability, apply to all products and services sold. 39
Adapters/Couplings - Bulkhead Adapters

Parker Autoclave Engineers bulkhead adapters are used to connect

tubing or piping of different sizes and configurations through the
panel. Bulkhead adapters are machined from cold worked stainless
steel. Other material and connections are available. Contact your
local Sales Repersentative for optional information.

Bulkhead Adapter

Panel Nut

*
"A" "B"

Adapter

Ordering Procedure

Typical catalog number: 20 BA M J16* F H4

20 BA M J16 F H4
Pressure Bulkhead *Male Connection Female Connection
(X 1000 psi) Adapter Female Male

Available End Connections

*Note: First connection designation is "A" side.

J4 - 1/4 JIC L4 - 1/4 Low Pressure M4 - 1/4 Medium Pressure H4 - 1/4 High Pressure P4 - 1/4 NPT
J6 - 3/8 JIC L6 - 3/8 Low Pressure M6 - 3/8 Medium Pressure H6 - 3/8 High Pressure P6 - 3/8 NPT
J8 - 1/2 JIC L8 - 1/2 Low Pressure M9 - 9/16 Medium Pressure H9 - 9/16 High Pressure P8 - 1/2 NPT
J10 - 5/8 JIC M12 - 3/4 Medium Pressure RH9 - 9/16 Reverse High Pressure
J12 - 3/4 JIC M16 - 1 Medium Pressure RH12 - 3/4 Reverse High Pressure
J16 - 1 JIC RH16 - 1 Reverse High Pressure
Note: Special material adapters may be supplied with four flats in place of standard hex.

40 All general terms and conditions of sale, including limitations of our liability, apply to all products and services sold.
Reverse High to Medium-Pressure

Male Connection AE Medium Pressure - Female Connection

R/H SF250CX SF375CX SF562CX SF750CX SF1000CX

9/16 20BAMRH9FM4 20BAMRH9FM6 20BAMRH9FM9

3/4 20BAMRH12FM9 20BAMRH12FM16
1 20BAMRH16FM16

Reverse High to High Pressure

Male Connection AE High Pressure - Female Connection

R/H F250C F375C F562C

9/16 40BAMRH9FH4 40BAMRH9FH9

3/4 30BAMRH12FH9
1

NPT to Medium Pressure

Male Connection AE Medium Pressure - Female Connection

NPT SF250CX SF375CX SF562CX SF750CX SF1000CX

1/4 15BAMP4FM4 15BAMP4FM6

3/8 15BAMP6FM6
1

Gland and collar supplied with adapter. Note: For pressure rating see ordering procedure.
All Dimensions for reference only and are subject
Maximum pressure rating is based on the lowest rat- to change.
ing of any component. Actual working pressure may
be determined by tubing pressure rating, if lower. For prompt service, Parker Autoclave Engineers
stocks select products. Consult factory.

All general terms and conditions of sale, including limitations of our liability, apply to all products and services sold. 41
JIC to Low Pressure

Male Connection AE Low Pressure - Female Connection

JIC SW250 SW375 SW500

1/4 15BAMJ4FL4
3/8
1/2

JIC to Medium Pressure

Male Connection AE Medium Pressure - Female Connection

JIC SF250CX SF375CX SF562CX SF750CX SF1000CX

1/4 20BAMJ4FM4 20BAMJ4FM6 20BAMJ4FM12

3/8 20BAMJ6FM4 20BAMJ6FM6 20BAMJ6FM9 20BAMJ6FM12
1/2 20BAMJ8FM6 20BAMJ8FM9 20BAMJ8FM12 20BAMJ8FM16

JIC to High Pressure

Male Connection AE High Pressure - Female Connection

JIC F250C F375C F562C

1/4 20BAMJ4FH4
3/8 20BAMJ6H4
1/2

42 All general terms and conditions of sale, including limitations of our liability, apply to all products and services sold.
Reverse High Pressure to Medium Pressure

Dimension inches (mm)

Catalog Male Female
Number R/H M/P A Panel Hole B C D Max E Hex

20BAMRH9FM4 9/16 SF250CX 0.81 (20.62) 2.56 (65.0) 1.22 (31.0) 0.38 (9.65) 1.00 (25.40)
20BAMRH9FM6 9/16 SF375CX 0.94 (23.88) 2.63 (66.80) 1.13 (28.70) 0.38 (9.65) 1.00 (25.40)
20BAMRH9FM9 9/16 SF562CX 1.13 (28.58) 3.00 (76.20) 1.28 (32.51) 0.38 (9.65) 1.38 (34.93)
20BAMRH12FM9 3/4 SF562CX 1.13 (28.58) 3.13 (79.50) 1.41 (35.81) 0.38 (9.65) 1.38 (34.93)
20BAMRH12FM16 3/4 SF1000CX 1.94 (49.28) 4.26 (108.20) 2.13 (54.10) 0.38 (9.65) 2.13 (54.10)
20BAMRH16FM16 1 SF1000CX 1.94 (49.28) 4.41 (112.01) 2.28 (57.91) 0.38 (9.65) 2.13 (54.10)

Reverse High Pressure to High Pressure

Dimension inches (mm)

Catalog Male Female
Number R/H H/P A Panel Hole B C D Max E Hex

40BAMRH9FH4 9/16 F250C 0.94 (23.88) 2.50 (63.50) 1.00 (25.40) 0.38 (9.65) 1.00 (25.40)
40BAMRH9FH9 9/16 F562C 1.69 (42.85) 3.38 (85.85) 1.50 (38.10) 0.38 (9.65) 1.88 (47.75)
30BAMRH12FH9 3/4 F562C 1.69 (42.85) 3.50 (88.90) 1.62 (41.15) 0.38 (9.65) 1.88 (47.75)

Pipe to Medium Pressure

Dimension inches (mm)

Catalog Male Female
Number NPT M/P A Panel Hole B C D Max E Hex

15BAMP4FM4 1/4 SF250CX 0.81 (20.62) 2.56 (65.02) 1.22 (31.01) 0.38 (9.65) 1.00 (25.40)
15BAMP4FM6 1/4 SF375CX 0.94 (23.88) 2.69 (68.33) 1.31 (33.35) 0.38 (9.65) 1.00 (25.40)
15BAMP6FM6 3/8 SF375CX 0.94 (23.88) 2.75 (69.85) 1.25 (31.75) 0.38 (9.65) 1.00 (25.40)

B
C D
Maximum

E A
Hex Panel Hole
Drill Size

Gland and collar supplied with adapter.

Maximum pressure rating is based on the lowest rating of any component.

Actual working pressure may be determined by tubing pressure rating, if lower.

Note: For pressure rating see ordering procedure.

All Dimensions for reference only and are subject to change.

For prompt service, Parker Autoclave Engineers stocks select products. Consult factory.

All general terms and conditions of sale, including limitations of our liability, apply to all products and services sold. 43
JIC to Low Pressure

Dimension inches (mm)

Catalog Male Female
Number JIC LP A Panel Hole B C D Max E Hex

15BAMJ4FL4 1/4 SW250 0.94 (23.88) 2.29 (58.04) 0.91 (23.11) 0.38 (9.65) 1.00 (25.40)

JIC to Medium Pressure

Dimension inches (mm)

Catalog Male Female
Number JIC MP A Panel Hole B C D Max E Hex

20BAMJ4FM4 1/4 SF250CX 0.81 (20.62) 2.25 (57.15) 0.91 (23.11) 0.38 (9.65) 1.00 (25.40)
20BAMJ4FM6 1/4 SF375CX 0.81 (20.62) 2.44 (61.93) 0.94 (23.88) 0.38 (9.65) 1.00 (25.40)
20BAMJ4FM12 1/4 SF750CX 1.69 (42.85) 2.94 (74.68) 1.22 (31.0) 0.38 (9.65) 1.88 (47.75)
20BAMJ6FM4 3/8 SF250CX 0.81 (20.62) 2.25 (57.15) 0.91 (23.11) 0.38 (9.65) 1.00 (25.40)
20BAMJ6FM6 3/8 SF375CX 0.94 (23.88) 2.44 (61.98) 0.94 (23.88) 0.38 (9.65) 1.00 (25.40)
20BAMJ6FM9 3/8 SF562CX 1.13 (28.58) 2.75 (69.85) 1.16 (29.46) 0.38 (9.65) 1.38 (34.93)
20BAMJ6FM12 3/8 SF750CX 1.69 (42.85) 2.94 (74.68) 1.22 (31.0) 0.38 (9.65) 1.88 (47.75)
20BAMJ8FM6 1/2 SF375CX 0.81 (20.62) 2.53 (64.26) 1.03 (26.16) 0.38 (9.65) 1.00 (25.40)
20BAMJ8FM9 1/2 SF562CX 1.13 (28.58) 3.00 (76.20) 1.41 (35.69) 0.38 (9.65) 1.38 (34.93)
20BAMJ8FM12 1/2 SF750CX 1.69 (42.85) 3.13 (79.38) 1.41 (35.69) 0.38 (9.65) 1.88 (47.75)
20BAMJ8FM16 1/2 SF1000CX 1.94 (49.20) 4.36 (110.72) 2.23 (56.62) 0.50 (12.70) 1.87 (47.50*)
*Dimension across flats

JIC to High Pressure

Dimension inches (mm)

Catalog Male Female
Number JIC HP A Panel Hole B C D Max E Hex

20BAMJ4FH4 1/4 F250C 0.94 (23.80) 2.44 (61.90) 1.06 (26.97) 0.38 (9.65) 1.00 (25.40)
20BAMJ6FH4 3/8 F250C 0.94 (23.80) 2.47 (62.74) 1.09 (27.79) 0.38 (9.65) 1.00 (25.40)

B
C D
Maximum

E A
Hex Panel Hole
Drill Size

Gland and collar supplied with adapter.

Maximum pressure rating is based on the lowest rating of any component.

Actual working pressure may be determined by tubing pressure rating, if lower.

Note: For pressure rating see ordering procedure.

All Dimensions for reference only and are subject to change.

For prompt service, Parker Autoclave Engineers stocks select products. Consult factory.

44 All general terms and conditions of sale, including limitations of our liability, apply to all products and services sold.
Adapters/Couplings - SAE O-Ring Adapters
Parker Autoclave Engineers also offers a line of components that assist in adapting into and out of specialized connections with
Parker Autoclave Engineers products. Along with the adapters shown, Parker Autoclave Engineers can provide other special
adapters to fill your requirements. Contact your local Sales representative for information.

AE Low, Medium and High Medium Pressure (Female) SAE/MS Male

Note: O-rings are standard Buna-N.

10,000 psi (690 bar) operating pressure.
SAE/MS

O-Ring

MC240

MC240 (SAE/MS Straight thread Boss)

SAE/MS AE Low Pressure (Female)

Connection Thread Size
Type (inches) W125 SW250 SW 375 SW500
5/16-24
MC240 7/16-20 M44MC2B M46MC2B
(SAE/MS) 9/16-18
3/4-16

SAE/MS AE Medium Pressure (Female)

Connection Thread Size
Type (inches) SF250CX SF375CX SF562CX SF750CX SF1000CX
5/16-24 M24MC6B M26MC6B
7/16-20 M44MC6B M46MC6B M49MC6B
MC240 9/16-18 M64MC6B M66MC6B M69MC6B
(SAE/MS) 3/4-16 M86MC6B M89MC6B M812MC6B
7/8-14 M1012MC6B M1016MC6B
1-1/16-12 M126MC6B M1212MC6B M1216MC6B
1-5/16-12 M1616MC6B

SAE/MS AE High Pressure (Female)

Connection Thread Size
Type (inches) F250C F375C F562C
5/16-24
MC240 7/16-20 M44MC3B M46MC3B
(SAE/MS) 9/16-18 M64MC3B M66MC3B
3/4-16
For additional information contact your local sales representative.

All general terms and conditions of sale, including limitations of our liability, apply to all products and services sold. 45
Adapters/Couplings - Female Tube Caps / Gauge Connectors
Tube Caps

Parker Autoclave Engineers offers a line of tube caps used to seal the
ends of tubing. Caps are used when pressure testing lengths of tubes
or capping off sections of systems for isolation or pressure tests.

Female Tube Caps - Low Pressure

Connection Outside Diameter Dimension inches (mm)

Catalog Pressure Rating
Number Type Tube-Inches psi (bar)* A Hex B

SWTC2 W125 1/8 15000 (1034.20) 0.50 (12.7) 0.63 (15.9)

SWTC4 SW250 1/4 15000 (1034.20) 0.63 (15.9) 1.00 (25.4)
SWTC6 SW375 3/8 15000 (1034.20) 0.75 (19.1) 1.09 (27.8)
SWTC8 SW500 1/2 10000 (689.5) 1.00 (25.4) 1.25 (31.8)

Female Tube Caps - Medium Pressure

Connection Outside Diameter Dimension inches (mm)

Catalog Pressure Rating B
Number Type Tube-Inches psi (bar)* A Hex B

20TC4X SF250CX 1/4 20000 (1378.9) 0.63 (15.9) 0.81 (20.6)

20TC6X SF375CX 3/8 20000 (1378.9) 0.75 (19.1) 1.13 (28.6)
A
20TC9X SF562CX 9/16 20000 (1378.9) 1.00 (25.4) 1.38 (34.9) Hex
20TC12X SF750CX 3/4 20000 (1378.9) 1.38 (34.9) 1.75 (44.5)
20TC16X SF1000CX 1 20000 (1378.9) 1.75 (44.5) 2.25 (57.1)
15TC24X SF1500CX 1-1/2 15000 (1034.2) 2.25 (57.6) 3.00 (76.2)
Tube cap configuration may vary from outline shown.

Female Tube Caps - High Pressure Tube Caps

Connection Outside Diameter Dimension inches (mm)

Catalog Pressure Rating
Number Type Tube-Inches psi (bar)* A Hex B

43TC16 F1000C 1 43000 (2964.7) 1.75 (44.5) 2.25 (57.1)

60TC4C F250C 1/4 60000 (4136.7) 0.75 (19.1) 0.75 (19.1)

60TC6C F375C 3/8 60000 (4136.7) 1.00 (25.4) 1.13 (28.6)
60TC9C F562C 9/16 60000 (4136.7) 2.25 (57.1) 1.38 (34.9)
150TC5C F312C-150 5/16 150,000 (10342) 1.19 (30.1) 2.63 (66.8)
*Maximum pressure rating is based on the lowest rating of any component. Actual working pressure may be determined by For prompt service, Parker Autoclave Engineers stocks select products. Consult factory.
tubing pressure rating, if lower.Note: All tube caps are furnished with connection components unless otherwise specified. All
dimensions for reference only and subject to change.

46 All general terms and conditions of sale, including limitations of our liability, apply to all products and services sold.
Female Tube Caps - JIC
B

Connection Dimension inches (mm)

Catalog Outside Diameter Pressure Rating
Number Type Tube-Inches psi (bar) A Hex B

20JC4 JIC 1/4 20000 (1378.9) 0.75 (19.1) 1.00 (25.4) A

Hex
20JC6 JIC 3/8 20000 (1378.9) 0.94 (23.8) 1.13 (28.6)
20JC8 JIC 1/2 20000 (1378.9) 1.19 (30.1) 1.31 (58.6)
* Maximum pressure rating must not exceed rating of tubing used.
Note: All tube caps are furnished with connection components unless otherwise specified.
All dimensions for reference only and subject to change. Tube cap configuration may vary from outline shown.

Female Tube Caps and Plugs - Reverse High Pressure (M Style)

Connection Dimension inches (mm)

Catalog Outside Diameter Pressure Rating
Number Type Tube-Inches psi (bar) A Hex B

26RHC16 RHP Cap 1 26000 (1792.6) 1.38 (34.9) 1.13 (28.6)

26RHP16 RHP Plug 1 26000 (1792.6) --- ---
Both caps and plug required.

Gauge Connectors

Parker Autoclave Engineers offers a line of gauge connectorsused to connect

pressure lines to pressure gauges. Gauge connectors can be connected to
gauges with tapered and straight pipe threads, or high-pressure connections.

Gauge Connectors

To Fit This Gauge Connection 1/4 NPT 1/2 NPT 1/2 NPS

Seal Type Tube Cone Tube Cone Gasket

With This Female Tubing Connection 60,000 PSI 60,000 PSI 60,000 PSI
(4136.8 bar) (4136.8 bar) (4136.8 bar)

1/4 F250C CG4400 CG4800 CG8400

High
Pressure
9/16 F562C CG9800 CG8900

Gauge Connectors

To Fit This Gauge Connection 1/4 High Pressure F250C

Seal Type H.P. Cone

With This Male Tubing Connection 20,000 PSI

(1378.9 bar)

Medium
Pressure 9/16 SF562CX 101F-1707

NPT: National Pipe Thread Note: For gauge connector without collars and glands, add the following suffix: -WO
NPS: National Straight Pipe Thread For gauge connector for sour gas applications, add the following suffix: -SOG or -SOGWO

All general terms and conditions of sale, including limitations of our liability, apply to all products and services sold. 47
Gauge Connectors

Gauge Dimension inches (mm)

Catalog Connection
Outside Diameter Pressure Rating
Number Tube-Inches psi (bar) A Hex B
Type

CG4400 Tube Cone 1/4 60000 (4136.7) 1.00 (25.4) .813 (20.6)
CG4800 Tube Cone 1/4 60000 (4136.7) 1.19 (30.1) .94 (23.8) See Figure 1
CG9800 Tube Cone 9/16 60000 (4136.7) 1.50 (38.1) 1.25 (31.8)

CG8400 Gasket 1/4 60000 (4136.7) 1.19 (30.1) 1.19 (30.1)

See Figure 2
CG8900 Gasket 9/16 60000 (4136.7) 1.38 (34.9) 2.25 (57.1)

101F-1707 1/4 9/16 20000 (1379) 0.63 (15.9) 2.75 (69.9)

See Figure 3
High Pressure

B B
B

A A A
Hex Hex Hex

Figure 1 Figure 2 Figure 3

See note 2

*Maximum pressure rating is based on the lowest rating of any component. Actual working pressure may be determined by tubing pressure rating, if lower.
Note: 1) For pressure rating see selection chart. These adapters are not intended as couplings. For prompt service, Parker Autoclave Engineers
2) Operation of this connector will depend on the inlet hole configuration in the gauge. Check to see that tubing will seal. stocks select products. Consult factory.

Offer of Sale
The items described in this document are available for sale by Parker Hannifin Corporation, its subsidiaries or its authorized distributors. Any sale contract entered by Parker will be governed by the provisions
stated in Parker's standard terms and conditions of sale (copy available upon request).

2013 Parker Hannifin Corporation | Autoclave Engineers is a registered trademark of the Parker Hannifin Corporation 02-0127SE January2013

Caution! Do not mix or interchange parts or tubing with those of

other manufacturers. Doing so is unsafe and will void warranty.

Parker Autoclave Engineers high-pressure ball valves have been de-

signed to provide superior quality for maximum performance within
a variety of valve styles, sizes, and process connections. Some of
the more unique design innovations include an integral one-piece
trunnion mounted style ball and stem that eliminates the shear
failure common in two piece designs, re-torqueable seat glands that
result in longer seat life, and a low friction stem seal that reduces
actuation torque and enhances cycle life.

These ball valves can also be modified to incorporate the use of Flow Configuration
special materials, seals for high temperature applications, subsea
models, and valve actuators.

When it comes to high-pressure applications, these ball valves

with the associated high-pressure components, provide the critical
performance demanded by the high pressure market.

Ball Valve Features:

One-piece, trunnion mounted style, stem design
eliminates shear failure and reduces the effects of side
Two-Way
loading found in two piece designs. Shut-Off
Re-torqueable seat glands for longer seat life.
PEEK seats offer excellent resistance to chemicals, heat,
and wear/abrasion.
Applications:
Full-port flow path minimizes pressure drop.
316 cold worked stainless steel construction. Laboratories

Ball Valves - 2-Way Series

Test Stands
Low friction pressure assisted graphite filled PTFE stem
seal increases cycle life and reduces operating torque. Control Panels
Quarter turn from open to close with positive stop. Chemical Research
Viton o-rings for operation from 0F (-17.8C) to 400F Pilot Plants
(204C). Water Blast Pumping Units
Optional o-rings available for high-temperature High volume chemical injection
applications. skids.
Optional wetted materials.
Wide selection of tube and pipe end fittings available.
Electric and pneumatic actuator options.

All general terms and conditions of sale, including limitations of our liability, apply to all products andwww.autoclave.com
services sold. 1
Ball Valves - 2-Way Series (1/4 Orifice)
Pressures to 20,000 psi (1379 bar) .250 (6.35mm) Orifice

MAWP @ Minimum Orifice

Connection Room Temperature inches(mm)
W125 15,000 psi (1034 bar) .094 (2.39)
SW250 15,000 psi (1034 bar) .128 (3.25)
SW375 15,000 psi (1034 bar) .250 (6.35)
SW500 10,000 psi (690 bar) .250 (6.35)
SF250CX20 20,000 psi (1379 bar) .109 (2.77)
SF375CX20 20,000 psi (1379 bar) .203 (5.16)
SF562CX20 20,000 psi (1379 bar) .250 (6.35)
F250C 20,000 psi (1379 bar) .094 (2.39)
F375C 20,000 psi (1379 bar) .125 (3.17)
F562C 20,000 psi (1379 bar) .188 (4.77)
1/8 NPT 15,000 psi (1034 bar) .250 (6.35)
1/4 NPT 15,000 psi (1034 bar) .250 (6.35)
3/8 NPT 15,000 psi (1034 bar) .250 (6.35)
1/2 NPT 15,000 psi (1034 bar) .250 (6.35)
Valve Cv=1.51
MAWP: Maximum Allowable Working Pressure
Cv listed is for maximum orifice size of .250 inches only. PRESSURE TEMPERATURE RATINGS

Consult factory for Cv of valves with reduced orifice sizes.

TEMPERATURE C
(-18) (38) (93) (150) (204) (260)
STAINLESS STEEL HANDLE
20,000 (1379)
SF & F CONNECTIONS

ONE PIECE BALL

AND STEM

15,000 (1034)
STOPPING DEVICE
W125, SW250, SW375, & NPT CONNECTIONS
PRESSURE PSIG

PRESSURE BAR
PACKING GLAND
THRUST WASHER
LOCKING PIECE
10,000 (690)
SW500 CONNECTION
SPRING ENERGIZED SEAL

PEEK SEATS
LOCKNUT
SEAT GLAND
5,000 (345)

NPT connections rated 400F (204C) maximum.

0
100 200 300 400 500
TEMPERATURE F
PEEK BEARING VITON O-RING

SEAT RETAINER Pressure ratings are determined by the end connections chosen, see chart.

NOTE: Ball valves are not recommended for critical gas applications such as Hydrogen, Helium or other small molecular gases.

Ordering Procedure
For complete information on available end connections and material options, see next page. 2-way ball valves are furnished complete with tube or
pipe connections.

Typical catalog number: 2B 4 S 20 M9

2B 4 S 20 M9 XXX
Valve Ball Material Pressure End Connection Options
Series Orifice (X 1000 psi)
2B: 2-way Diameter S -316SS M9 - SF562CX20 HT - High Temperature
4-1/4 (For material options (See Chart on next (Ball Valve Actuators,
(6.35 mm) contact factory) page) see next page)
2 All general terms and conditions of sale, including limitations of our liability, apply to all products and services sold.
End Connection Options
Seat Gland
Catalog End Connection MAWP @ Hex
Number Number Connection Room Temperature Inches(mm)

2B4S15L2 L2 W125 15,000 psi (1034 bar) 1 (25.40)

2B4S15L4 L4 SW250 15,000 psi (1034 bar) 1 (25.40)

2B4S15L6 L6 SW375 15,000 psi (1034 bar) 1 (25.40)

2B4S10L8 L8 SW500 10,000 psi (690 bar) 1 (25.40)

2B4S20M4 M4 SF250CX20 20,000 psi (1379 bar) 1 (25.40)

2B4S20M6 M6 SF375CX20 20,000 psi (1379 bar) 1 (25.40)

2B4S20M9 M9 SF562CX20 20,000 psi (1379 bar) 1 (25.40)

2B4S20H4 H4 F250C 20,000 psi (1379 bar) 1 (25.40)

2B4S20H6 H6 F375C 20,000 psi (1379 bar) 1 (25.40)

2B4S20H9 H9 F562C 20,000 psi (1379 bar) 1.38 (35.05)

2B4S15P2 P2 1/8 NPT 15,000 psi (1034 bar) 1 (25.40)

2B4S15P4 P4 1/4 NPT 15,000 psi (1034 bar) 1 (25.40)

2B4S15P6 P6 3/8 NPT 15,000 psi (1034 bar) 1 (25.40)

2B4S15P8 P8 1/2 NPT 15,000 psi (1034 bar) 1.38 (35.05)

MAWP: Maximum Allowable Working Pressure
See ball valve option/details section for end connection details, material, and high temperature options.

Ball Valve Options Valve Maintenance

Pneumatic Actuator Repair Kits: add R to the front of valve catalog first 4
AO - Air-to-open/spring to close numbers for proper repair kit.
AC - Air-to-close/spring to open (Example: R2B4S)
AOC - Air-to-open-and-close (double action)

Electric Actuator Consult your Parker Autoclave Engineers representative for

EO1 - 120 volt AC 50/60 Hz pricing on repair kits. Refer to the Operation and
EO2 - 220 volt AC 50/60 Hz Maintenance manual for proper maintenance procedures.
EO3 - 24 VDC

Actuator Operating Temperature:

Pneumatic: 0F to 175F (-17C to 79C)
Electric: 0F to 160F (-17C to 71C)

High Temperature Option:

HT - for media temperature up to 500F (260C)

See ball valve actuator section for full description,

additional information, and options.

All general terms and conditions of sale, including limitations of our liability, apply to all products and services sold. 3
Ball Valves - 2-Way Series (3/8 Orifice)
Pressures to 20,000 psi (1379 bar) .375 (9.52mm) Orifice

MAWP @ Minimum Orifice

Connection Room Temperature inches(mm)
SW500 10,000 psi (690 bar) .375 (9.52)
SF375CX20 20,000 psi (1379 bar) .203 (5.16)
SF562CX20 20,000 psi (1379 bar) .312 (7.92)
SF750CX20 20,000 psi (1379 bar) .328 (8.33)
1/4 NPT 15,000 psi (1034 bar) .375 (9.52)
3/8 NPT 15,000 psi (1034 bar) .375 (9.52)
1/2 NPT 15,000 psi (1034 bar) .375 (9.52)
Valve Cv=3.51
MAWP: Maximum Allowable Working Pressure
Cv listed is for maximum orifice size of .375 inches only.
Consult factory for Cv of valves with reduced orifice sizes.

PRESSURE TEMPERATURE RATINGS

TEMPERATURE C
STAINLESS STEEL HANDLE
(-18) (38) (93) (150) (204) (260)
20,000 (1379)
SF CONNECTION
ONE PIECE BALL
AND STEM

STOPPING DEVICE 15,000 (1034)

NPT CONNECTION
PRESSURE PSIG

PRESSURE BAR
PACKING GLAND
THRUST WASHER
LOCKING PIECE 10,000 (690)
SPRING ENERGIZED SEAL SW500 CONNECTION
CARBON FILLED
PEEK SEATS
LOCKNUT
SEAT GLAND

5,000 (345)

NPT connection rated 400F (204C) maximum.

0
100 200 300 400 500
TEMPERATURE F
PEEK BEARING VITON O-RING

SEAT RETAINER *pressure ratings are determined by the end connections chosen, see chart.
Pressure ratings are determined by the end connections chosen, see chart.

NOTE: Ball valves are not recommended for critical gas applications such as Hydrogen, Helium or other small molecular gases.

Ordering Procedure
For complete information on available end connections and material options, see next page. 2-way ball valves are furnished complete with tube
or pipe connections.

Typical catalog number: 2B 6 S 20 M9

2B 6 S 20 M9 XXX
Valve Ball Material Pressure End Connection Options
Series Orifice (X 1000 psi)
2B: 2-way Diameter S - 316SS M9 - SF562CX20 HT - High Temperature
(For material options (See Chart on next (Ball Valve Acutators,
6-3/8
contact factory) page) see next page.)
(9.52 mm)
4 All general terms and conditions of sale, including limitations of our liability, apply to all products and services sold.
End Connection Options
Seat Gland
Catalog End Connection MAWP @ Hex
Number Number Connection Room Temperature Inches(mm)

2B6S10L8 L8 SW500 10,000 psi (690 bar) 1.38 (35.05)

2B6S20M6 M6 SF375CX20 20,000 psi (1379 bar) 1.38 (35.05)

2B6S20M9 M9 SF562CX20 20,000 psi (1379 bar) 1.38 (35.05)

2B6S20M12 M12 SF750CX20 20,000 psi (1379 bar) 1.38 (35.05)

2B6S15P4 P4 1/4 NPT 15,000 psi (1034 bar) 1.38 (35.05)

2B6S15P6 P6 3/8 NPT 15,000 psi (1034 bar) 1.38 (35.05)

2B6S15P8 P8 1/2 NPT 15,000 psi (1034 bar) 1.38 (35.05)

MAWP: Maximum Allowable Working Pressure

See ball valve option/details section for end connection details, material, and high temperature options.

Ball Valve Options Valve Maintenance

Electric Actuator Consult your Parker Autoclave Engineers representative for

EO1 - 120 volt AC 50/60 Hz pricing on repair kits. Refer to the Operation and
EO2 - 220 volt AC 50/60 Hz Maintenance manual for proper maintenance procedures.
EO3 - 24 VDC

Actuator Operating Temperature:

Pneumatic: 0F to 175F (-17C to 79C)
Electric: 0F to 160F (-17C to 71C)

High Temperature Option:

HT - for media temperature up to 500F (260C)

See ball valve actuator section for full description,

additional information, and options.

All general terms and conditions of sale, including limitations of our liability, apply to all products and services sold. 5
Ball Valves - 2-Way Series (1/2 Orifice)
Pressures to 15,000 psi (1034 bar) .500 (12.7mm) Orifice

MAWP @ Minimum Orifice

Connection Room Temperature Inches (mm)
SF750CX20 15,000 psi (1034 bar) .500 (12.70)
SF1000CX20 15,000 psi (1034 bar) .500 (12.70)
3/4 NPT 10,000 psi (690 bar) .500 (12.70)
1 NPT 10,000 psi (690 bar) .500 (12.70)
Valve Cv=10.20
MAWP: Maximum Allowable Working Pressure

STAINLESS STEEL HANDLE

PRESSURE TEMPERATURE RATINGS

TEMPERATURE C
(-18) (38) (93) (150) (204) (260)
ONE PIECE BALL STOPPING DEVICE
AND STEM 15,000 (1034)
SM CONNECTIONS
PACKING GLAND

THRUST WASHER
LOCKING PIECE
(690)
PRESSURE PSIG

10,000

PRESSURE BAR
SPRING ENERGIZED SEAL CARBON FILLED
PEEK SEATS NPT CONNECTIONS
LOCKNUT SEAT GLAND

5,000 (345)

NPT connections rated 400F (204C) maximum.

0
100 200 300 400 500

PEEK BEARING VITON O-RING TEMPERATURE F

SEAT RETAINER

Pressure ratings are determined by the end connections chosen, see chart.

NOTE: Ball valves are not recommended for critical gas applications such as Hydrogen, Helium or other small molecular gases.

Ordering Procedure
For complete information on available end connections and material options, see next page. 2-way ball valves are furnished complete with
tube or pipe connections.

Typical catalog number: 2B 8 S 15 M12

2B 8 S 15 M12 XXX
Valve Ball Material Pressure End Connection Options
Series Orifice (X 1000 psi)
2B: 2-way Diameter S -316SS M12 - SF750CX20 HT - High Temperature
(For material options contact (See Chart on next (Ball Valve Acutators,
8-1/2
factory) page) see next page.)
(12.7 mm)
6 All general terms and conditions of sale, including limitations of our liability, apply to all products and services sold.
End Connection Options
Seat Gland
Catalog End Connection MAWP @ Hex
Number Number Connection Room Temperature Inches(mm)

2B8S15M12 M12 SF750CX20 15,000 psi (1034 bar) 1.75 (44.5)

2B8S15M16 M16 SF1000CX20 15,000 psi (1034 bar) 1.75 (44.5)

2B8S10P12 P12 3/4 NPT 10,000 psi (690 bar) 1.75 (44.5)

2B8S10P16 P16 1 NPT 10,000 psi (690 bar) 1.75 (44.5)

MAWP: Maximum Allowable Working Pressure

See ball valve option/details section for end connection details, material, and high temperature options.

Ball Valve Options Valve Maintenance

Electric Actuator Consult your Parker Autoclave Engineers representative for

EO1 - 120 volt AC 50/60 Hz pricing on repair kits. Refer to the Operation and
EO2 - 220 volt AC 50/60 Hz Maintenance manual for proper maintenance procedures.
EO3 - 24 VDC

Actuator Operating Temperature:

Pneumatic: 0F to 175F (-17C to 79C)
Electric: 0F to 160F (-17C to 71C)

High Temperature Option:

HT - for media temperature up to 500F (260C)

See ball valve Actuator section for full description,

additional information, and options.

All general terms and conditions of sale, including limitations of our liability, apply to all products and services sold. 7
Ball Valve Dimensions - inches (mm)

VALVE MODELS
2B4S 2B6S 2B8S E*
4.33 4.97 5.97 E
A (109.99) (126.30) (151.64)

4.19 5.53 7.73 D

B (106.49) (140.41) (196.46)

2.00 3.00 4.13

C (50.80) (76.20) (104.78)

3.37 4.99 5.12

D (85.55) (126.82) (130.04)
K TYPICAL DIAMETER
3.90 5.52 10.25
E (99.02) (140.32) *(260.35) G
BLOCK THICKNESS
F
1.13 1.38 1.76 A
(28.58) (34.92) (44.70) H
1.50 2.00 3.00
G (38.10) (50.80) (76.20)
J
TYPICAL
0.75 1.00 1.50 F
H (19.05) (25.40) (38.10)
L
0.43 0.41 0.50
J (10.92) (10.31) (12.70)

0.28 0.28 0.28

K (7.11) (7.11) (7.11)

L
1.91 2.50 3.09 C
(48.41) (63.50) (78.58)
B
Block 1.00 1.38 1.75
Thickness (25.40) (34.92) (44.45)

Ball Valve Panel Mounting Dimensions - inches (mm)

C (Diameter)
VALVE MODELS
2B4S 2B6S 2B8S D (Typical Diameter)
See Note:
1.500 2.000 3.000
A (38.10) (50.80) (76.20)

B 0.750 1.000 1.500

(19.05) (25.40) (38.10)

C 1.06
(26.92)
1.50
(38.10)
1.88
(47.63)
B

D
0.28
(7.11)
0.28
(7.11)
0.28
(7.11)
A
All dimensions are for reference only
and are subject to change without notice.
Note: Body mounting 1/4 - 20 thread

8 All general terms and conditions of sale, including limitations of our liability, apply to all products and services sold.
Ball Valves - 2-Way Series (3/4 Orifice)
Pressures to 15,000 psi (1034 bar) .750 (19.05mm) Orifice

MAWP @ Minimum Orifice

Connection Room Temperature Inches (mm)
SF1000CX10 15,000 psi (1034 bar) .688 (17.48)
1/2 NPT 15,000 psi (1034 bar) .688 (17.48)
3/4" NPT 10,000 psi (690 bar) .750 (19.05)
1" NPT 10,000 psi (690 bar) .750 (19.05)
Valve Cv=21

MAWP: Maximum Allowable Working Pressure

STAINLESS STEEL HANDLE

PRESSURE TEMPERATURE RATINGS

TEMPERATURE C
(-18) (38) (93) (150) (204) (260)
ONE PIECE BALL STOPPING DEVICE
AND STEM
15,000 (1034)
1/2 & SF CONNECTIONS
PACKING GLAND

THRUST WASHER
LOCKING PIECE
(690)
PRESSURE PSIG

10,000

PRESSURE BAR
SPRING ENERGIZED SEAL CARBON FILLED
PEEK SEATS 1 & 3/4 NPT CONNECTIONS
LOCKNUT SEAT GLAND

5,000 (345)

NPT connections rated 400F (204C) maximum.

0
100 200 300 400 500

VITON O-RING
TEMPERATURE F
PEEK BEARING
SEAT RETAINER

Pressure ratings are determined by the end connections chosen, see chart.

NOTE: Ball valves are not recommended for critical gas applications such as Hydrogen, Helium or other small molecular gases.

Ordering Procedure
For complete information on available end connections and material options, see next page. 2-way ball valves are furnished complete with
tube or pipe connections.

Typical catalog number: 2B 12 S 15 M16

2B 12 S 15 M16 XXX
Valve Ball Material Pressure End Connection Options
Series Orifice (X 1000 psi)
2B: 2-way Diameter S -316SS M16 - SF1000CX10 HT - High Temperature
(For material options contact (See Chart on next (Ball Valve Acutators,
12-3/4
factory) page) see next page.)
(19.05 mm)
All general terms and conditions of sale, including limitations of our liability, apply to all products and services sold. 9
End Connection Options
Seat Gland
Catalog End Connection MAWP @ Hex
Number Number Connection Room Temperature Inches(mm)

2B12S15M16 M16 SF1000CX10 15,000 psi (1034 bar) 1.88 (47.6)

2B12S15P8 P8 1/2" NPT 15,000 psi (1034 bar) 1.88 (47.6)

2B12S10P12 P12 3/4" NPT 10,000 psi (690 bar) 1.88 (47.6)

2B12S10P16 P16 1" NPT 10,000 psi (690 bar) 1.88 (47.6)

MAWP: Maximum Allowable Working Pressure

See ball valve option/details section for end connection details, material, and high temperature options.

Ball Valve Options Valve Maintenance

Valve Actuators Repair Kits: add R to the front of valve catalog first 4
Consult Factory numbers for proper repair kit.
(Example: R2B12S)
Actuator Operating Temperature:
Pneumatic: 0F to 175F (-17C to 79C)
Electric: 0F to 160F (-17C to 71C) Consult your Parker Autoclave Engineers representative for
pricing on repair kits. Refer to the Operation and
Maintenance manual for proper maintenance procedures.

10 All general terms and conditions of sale, including limitations of our liability, apply to all products and services sold.
Ball Valve Dimensions - inches (mm)

22.00
(558.8)
11.00
(279.4)

.41 (10.4)
TYPICAL DIAMETER
3.25
(82.6)
10.13 3.00 (76.2)
(257.3) BLOCK THICKNESS
1.63
(41.4)
0.69 (17.5)
TYPICAL
2.47
(62.7)

4.50
(114.3)

4.50
(114.3)
9.18
(233.2)

Ball Valve Panel Mounting Dimensions - inches (mm)

2.38 (60.3)

.44 (11.2)
(Typical Diameter)
See Note:

1.63
(41.4)

3.25
(82.6)
All dimensions are for reference only
and are subject to change without notice.
NOTE: Body mounting 3/8-16 thread

All general terms and conditions of sale, including limitations of our liability, apply to all products and services sold. 11
Ball Valves - 2-Way Series (1 Orifice)
Pressures to 10,000 psi (690 bar) 1.000 (25.40mm) Orifice

MAWP @ Minimum Orifice

Connection Room Temperature Inches (mm) Valve Cv
SM1500CX10 (Male) 10,000 psi (690 bar) .938 (23.83) 30
1 SAE (Female) 10,000 psi (690 bar) 1.00 (25.40) 34
1 NPT (Female) 10,000 psi (690 bar) 1.00 (25.40) 34

MAWP: Maximum Allowable Working Pressure

STAINLESS STEEL HANDLE

PRESSURE TEMPERATURE RATINGS

TEMPERATURE C
(-18) (38) (93) (150) (204) (260)
ONE PIECE BALL STOPPING DEVICE
AND STEM 15,000 (1034)
PACKING GLAND

THRUST WASHER
LOCKING PIECE
(690)
PRESSURE PSIG

10,000

PRESSURE BAR
SPRING ENERGIZED SEAL CARBON FILLED
PEEK SEATS NPT, SAE & SM CONNECTIONS
LOCKNUT SEAT GLAND

5,000 (345)

NPT connections rated 400F (204C) maximum.

0
100 200 300 400 500

VITON O-RING TEMPERATURE F

PEEK BEARING
SEAT RETAINER
Pressure ratings are determined by the end connections chosen, see chart.

NOTE: Ball valves are not recommended for critical gas applications such as Hydrogen, Helium or other small molecular gases.

Ordering Procedure
For complete information on available end connections and material options, see next page. 2-way ball valves are furnished complete with
tube or pipe connections.

Typical catalog number: 2B 16 S 10 MA24

2B 16 S 10 MA24 XXX
Valve Ball Material Pressure End Connection Options
Series Orifice (X 1000 psi)
2B: 2-way Diameter S -316SS MA24 - SM1500CX10 HT - High Temperature
(For material options contact (See Chart on next (Ball Valve Acutators,
16-1.0
factory) page) see next page.)
(25.40 mm)
12 All general terms and conditions of sale, including limitations of our liability, apply to all products and services sold.
End Connection Options
Seat Gland
Catalog End Connection MAWP @ Hex
Number Number Connection Room Temperature Inches(mm)

2B16S10MA24 M24 SM1500CX10 (Male) 10,000 psi (690 bar) 1.88 (47.6)*Square

2B16S10S16 S16 1" SAE (Female) 10,000 psi (690 bar) 1.88 (47.6)

2B16S10P16 P16 1" NPT (Female) 10,000 psi (690 bar) 1.88 (47.6)

MAWP: Maximum Allowable Working Pressure

See ball valve option/details section for end connection details, material, and high temperature options.

Ball Valve Options Valve Maintenance

Valve Actuators Repair Kits: add R to the front of valve catalog first 4
Consult Factory numbers for proper repair kit.
(Example: R2B16S)
Actuator Operating Temperature:
Pneumatic: 0F to 175F (-17C to 79C)
Electric: 0F to 160F (-17C to 71C) Consult your Parker Autoclave Engineers representative for
pricing on repair kits. Refer to the Operation and
Maintenance manual for proper maintenance procedures.

All general terms and conditions of sale, including limitations of our liability, apply to all products and services sold. 13
Ball Valve Dimensions - inches (mm)

28.00
(711.2)
14.00
(355.6)

.53 (13.5)
TYPICAL DIAMETER
4.00
(101.6)
11.87 3.38 (85.9)
(301.5) BLOCK THICKNESS
2.00
(50.8)
0.88 (22.2)
TYPICAL 3.10
(78.6)

5.46
L (138.6)

5.00
(127.00)
8.41
(213.7) Female Connection Only
20.74
(526.7) *SM1500CX20 Connection Only

Ball Valve Panel Mounting Dimensions - inches (mm)

2.94 (74.7)
.44 (11.2)
(Typical Diameter)
See Note:

.750 (19.1)
1.500
(38.1)

2.000
(50.8)

4.000
(101.6)
All dimensions are for reference only
and are subject to change without notice.
NOTE: Body mounting 3/8-16 thread

14 All general terms and conditions of sale, including limitations of our liability, apply to all products and services sold.
All general terms and conditions of sale, including limitations of our liability, apply to all products and services sold. 15
WARNING
FAILURE, IMPROPER SELECTION OR IMPROPER USE OF THE PRODUCTS AND/OR SYSTEMS DESCRIBED HEREIN OR RELATED ITEMS CAN CAUSE DEATH, PERSONAL INJURY
AND PROPERTY DAMAGE.
This document and other information from Parker Hannifin Corporation, its subsidiaries and authorized distributors provide product and/or system options for further investiga-
tion by users having technical expertise. It is important that you analyze all aspects of your application and review the information concerning the product or system in the current
product catalog. Due to the variety of operating conditions and applications for these products or systems, the user, through its own analysis and testing, is solely responsible
for making the final selection of the products and systems and assuring that all performance, safety and warning requirements of the application are met. The products described
herein, including without limitation, product features, specifications, designs, availability and pricing, are subject to change by Parker Hannifin Corporation and its subsidiaries at
any time without notice.

2013 Parker Hannifin Corporation | Autoclave Engineers is a registered trademark of the Parker Hannifin Corporation 02-0105SE January2013

Caution! Do not mix or interchange parts or tubing with those of

other manufacturers. Doing so is unsafe and will void warranty.

Instrumentation Products Division Parker Hannifin Manufacturing Ltd. Caution! Parker Autoclave Engineers Valves, Fittings and Tools are
Autoclave Engineers Operation Instrumentation Products Division, Europe not designed to work with common commercial instrument tubing
8325 Hessinger Drive Industrial Estate Whitemill and will only work with tubing built to Parker Autoclave Engineers
AES Specifications. Failure to do so will void warranty.
Erie, Pennsylvania 16509-4679 USA Wexford, Republic of Ireland
PH: 814-860-5700 FAX: 814-860-5811 PH: 353 53 914 1566
www.autoclave.com
16 All general terms andFAX: 353 53 of
conditions 914 1582
sale, including limitations of our liability, apply to all products and services sold. ISO-9001 Certified
Ball Valves
3-Way Series
Pressures to 20,000 psi (1379 bar)

Parker Autoclave Engineers high-pressure ball valves have been

designed to provide superior quality for maximum performance
within a variety of valve styles, sizes, and process connections.
Some of the more unique design innovations include an integral
one-piece trunnion mounted style ball and stem that eliminates
the shear failure common in two piece designs, re-torqueable seat
glands that result in longer seat life, and a low friction stem seal
that reduces actuation torque and enhances cycle life.
These ball valves can also be modified to incorporate the use of
special materials, seals for high temperature applications, subsea Flow Configuration
models, and valve actuators.
When it comes to high-pressure applications, these ball valves
with the associated high-pressure components, provide the critical
performance demanded by the high pressure market.

Ball Valve Features:

One-piece, trunnion mounted style, stem design
eliminates shear failure found in two piece designs
and reduces effects of side loading.
Re-torqueable seat glands for longer seat life.
Carbon filled PEEK seats offer excellent resistance to 3-Way
3-Way 3-Way
3-Way
Switching Crossover
chemicals, heat, and wear/abrasion. Switching
180 Turn
Diverting
90 Turn
180 Turn 90 Turn
Full-port flow path minimizes pressure drop.
316 cold worked stainless steel construction.
Low friction pressure assisted graphite filled PTFE Applications:
Ball Valves - 3-Way Series
stem seal increases cycle life and reduces operating
torque. Laboratories
Available in 90 turn diverter and 180 turn switching Test Stands
models. Control Panels
Viton o-rings for operation from 0F (-17.8C) to Chemical Research
400F (204C).
Pilot Plants
Optional o-rings available for high-temperature Water Blast Pumping Units
applications.
High volume chemical injection
Optional wetted materials.
skids.
Wide selection of tube and pipe end fittings available.
Electric and pneumatic actuator options.

All general terms and conditions of sale, including limitations of our liability, apply to all products andwww.autoclave.com
services sold. 1
Ball Valves - 3/16" 3-Way Series
Pressures to 20,000 psi (1379 bar) .187 (4.77mm) Orifice

MAWP @ Minimum Orifice

Connection Room Temperature inches(mm)
W125 15,000 psi (1034 bar) .094 (2.39)
SW250 15,000 psi (1034 bar) .128 (3.25)
SW375 15,000 psi (1034 bar) .188 (4.77)
SW500 10,000 psi (690 bar) .188 (4.77)
SF250CX20 20,000 psi (1379 bar) .109 (2.77)
SF375CX20 20,000 psi (1379 bar) .188 (4.77)
SF562CX20 20,000 psi (1379 bar) .188 (4.77)
F250C 20,000 psi (1379 bar) .094 (2.39)
F375C 20,000 psi (1379 bar) .125 (3.17)
F562C 20,000 psi (1379 bar) .188 (4.77)
1/8 NPT 15,000 psi (1034 bar) .188 (4.77)
1/4 NPT 15,000 psi (1034 bar) .188 (4.77)
3/8 NPT 15,000 psi (1034 bar) .188 (4.77)
1/2 NPT 15,000 psi (1034 bar) .188 (4.77)
Valve Cv=.50
MAWP: Maximum Allowable Working Pressure
Cv listed is for maximum orifice size of .188 inches only.
Consult factory for Cv of valves with reduced orifice sizes. PRESSURE TEMPERATURE RATINGS

TEMPERATURE C
STAINLESS STEEL HANDLE
(-18) (38) (93) (150) (204) (260)
20,000 (1379)
SF & F CONNECTIONS
SET SCREW
See Note

STOPPING DEVICE
ONE PIECE BALL
AND STEM 15,000 (1034)
PRESSURE PSIG

PRESSURE BAR
PACKING GLAND
W125, SW250, SW375, & NPT CONNECTIONS
THRUST WASHER
LOCKING PIECE

SPRING ENERGIZED SEAL BELLEVILLE WASHERS

10,000 (690)
LOCKNUT
BELLEVILLE BACKUP SW500 CONNECTION
SEAT GLAND
O-RING

5,000 (345)

NPT connections rated 400F (204C) maximum.

O-RING
O-RING
0
CARBON FILLED PEEK SEATS 100 200 300 400 500
BEARING
SEAT RETAINER
TEMPERATURE F
BOTTOM GLAND

Pressure ratings are determined by the end connections chosen, see chart.
Note: Maximum side connection inlet pressure 15,000 psi (1034 bar)

NOTE: Ball valves are not recommended for critical gas applications such as Hydrogen, Helium or other small molecular gases.

Ordering Procedure
For complete information on available end connections and material options, see next page. 3-way ball valves are furnished complete with
tube or pipe connections.

Typical catalog number: 3B 3 S 20 M9

3B 3 S 20 M9 XXX
Valve Ball Material Pressure End Connection Options
Series Orifice (X 1000 psi)
3B: 3-way Diameter S -316SS M9 - SF562CX20 HT - High Temperature
3BD: 3-way diverter (For material options (See Chart on (Ball Valve Actuators,
3-3/16
contact factory) next page) see next page)
(4.77 mm)
2 All general terms and conditions of sale, including limitations of our liability, apply to all products and services sold.
End Connection Options
Catalog End Connection MAWP @ Hex
Number Number Connection Room Temperature Inches(mm)

3B3S15L2 L2 W125 15,000 psi (1034 bar) 1 (25.40)

3BD3S15L2
3B3S15L4 L4 SW250 15,000 psi (1034 bar) 1 (25.40)
3BD3S15L4
3B3S15L6 L6 SW375 15,000 psi (1034 bar) 1 (25.40)
3BD3S15L6
3B3S10L8 L8 SW500 10,000 psi (690 bar) 1 (25.40)
3BD3S10L8
3B3S20M4 M4 SF250CX20 20,000 psi (1379 bar) 1 (25.40)
3BD3S20M4
3B3S20M6 M6 SF375CX20 20,000 psi (1379 bar) 1 (25.40)
3BD3S20M6
3B3S20M9 M9 SF562CX20 20,000 psi (1379 bar) 1 (25.40)
3BD3S20M9
3B3S20H4 H4 F250C 20,000 psi (1379 bar) 1 (25.40)
3BD3S20H4
3B3S20H6 H6 F375C 20,000 psi (1379 bar) 1 (25.40)
3BD3S20H6
3B3S20H9 H9 F562C 20,000 psi (1379 bar) 1.38 (35.05)
3BD3S20H9
3B3S15P2 P2 1/8 NPT 15,000 psi (1034 bar) 1 (25.40)
3BD3S15P2
3B3S15P4 P4 1/4 NPT 15,000 psi (1034 bar) 1 (25.40)
3BD3S15P4
3B3S15P6 P6 3/8 NPT 15,000 psi (1034 bar) 1 (25.40)
3BD3S15P6
3B3S15P8 P8 1/2 NPT 15,000 psi (1034 bar) 1.38 (35.05)
3BD3S15P8
See ball valve option/detail section for end connection details, material, and high temperature options.
OPEN OPEN OPEN CLOSED OPEN

*3-WayDiverter
*3-Way Diverter Valve
Valve 3-Way Ball
3-Way BallValve
Valve
90 Turn
90 Turn 180
180 Turn
Turn
*The Diverter Valve design permits inlet flow through the bottom port. Outlet flow may be diverted to either valve side port.

Ball Valve Options Valve Maintenance

Pneumatic Actuator: Repair Kits: add R to the front of valve catalog
AO - Air-to-open/Spring to close (diverter style only) numbers for proper repair kit.
AC - Air-to-close/Spring to open (diverter style only) (Example: R3B3S)
AOC - Air-to-open-and-close (double action)
Electric Actuator:
EO1 - 120 volt AC 50/60 Hz Consult your Parker Autoclave Engineers representative for
EO2 - 220 volt AC 50/60 Hz pricing on repair kits. Refer to the Operation and
EO3 - 24 VDC Maintenance manual for proper maintenance procedures.
Actuator Operating Temperature: See ball valve actuator section for full description, additional information,
Pneumatic: 0F to 175F (-17C to 79C) and options.
Electric: 0F to 160F (-17C to 71C)
High Temperature Option:
HT - for media temperature up to 500F (260C)

All general terms and conditions of sale, including limitations of our liability, apply to all products and services sold. 3
Ball Valves - 3/8" 3-Way Series
Pressures to 15,000 psi (1034 bar) .328 (8.33mm) Orifice

MAWP @ Minimum Orifice

Connection Room Temperature inches(mm)
SW500 10,000 psi (690 bar) .328 (8.33)
SF375CX20 15,000 psi (1034 bar) .203 (5.16)
SF562CX20 15,000 psi (1034 bar) .312 (7.92)
SF750CX20 15,000 psi (1034 bar) .328 (8.33)
1/4 NPT 15,000 psi (1034 bar) .328 (8.33)
3/8 NPT 15,000 psi (1034 bar) .328 (8.33)
1/2 NPT 15,000 psi (1034 bar) .328 (8.33)
Valve Cv=2.1
MAWP: Maximum Allowable Working Pressure
Cv listed is for maximum orifice size of .328 inches only.
Consult factory for Cv of valves with reduced orifice sizes.

STAINLESS STEEL HANDLE

PRESSURE TEMPERATURE RATINGS

SET SCREW
TEMPERATURE C
STOPPING DEVICE (-18) (38) (93) (150) (204) (260)
ONE PIECE BALL
AND STEM
15,000 (1034)
PACKING GLAND SF & NPT CONNECTIONS
THRUST WASHER
LOCKING PIECE

SPRING ENERGIZED SEAL BELLEVILLE WASHERS

PRESSURE PSIG

(690)

PRESSURE BAR
10,000
LOCKNUT
BELLEVILLE BACKUP SW500 CONNECTION
SEAT GLAND
O-RING

5,000 (345)

NPT connections rated 400F (204C) maximum.

O-RING
O-RING
CARBON FILLED PEEK SEATS 0
BEARING
100 200 300 400 500
SEAT RETAINER
BOTTOM GLAND TEMPERATURE F

Pressure ratings are determined by the end connections chosen, see chart.
Side connection pressure not recommended.

NOTE: Ball valves are not recommended for critical gas applications such as Hydrogen, Helium or other small molecular gases.

Ordering Procedure
For complete information on available end connections and material options, see next page. 3-way ball valves are furnished complete with tube or
pipe connections.

Typical catalog number: 3B 6 S 15 M9

3B 6 S 15 M9 XXX
Valve Ball Material Pressure End Connection Options
Series Orifice (X 1000 psi)
3B: 3-way Diameter S -316SS M9 - SF562CX20 HT - High Temperature
3BD: 3-way diverter
6-3/8 (For material options (See Chart on next (Ball Valve Actuators,
(9.52 mm) contact factory) page) see next page)
4 All general terms and conditions of sale, including limitations of our liability, apply to all products and services sold.
End Connection Options

Catalog End Connection MAWP @ Hex

Number Number Connection Room Temperature Inches(mm)

3B6S10L8 L8 SW500 10,000 psi (690 bar) 1.38 (35.05)

3BD6S10L8
3B6S15M6 M6 SF375CX20 15,000 psi (1034 bar) 1.38 (35.05)
3BD6S15M6
3B6S15M9 M9 SF562CX20 15,000 psi (1034 bar) 1.38 (35.05)
3BD6S15M9
3B6S15M12 M12 SF750CX20 15,000 psi (1034 bar) 1.38 (35.05)
3BD6S15M12
3B6S15P4 P4 1/4 NPT 15,000 psi (1034 bar) 1.38 (35.05)
3BD6S15P4
3B6S15P6 P6 3/8 NPT 15,000 psi (1034 bar) 1.38 (35.05)
3BD6S15P6
3B6S15P8 P8 1/2 NPT 15,000 psi (1034 bar) 1.38 (35.05)
3BD6S15P8
MAWP: Maximum Allowable Working Pressure

See ball valve option/details section for end connection details, material, and high temperature options.

OPEN OPEN OPEN CLOSED OPEN

*3-Way Diverter
*3-Way Diverter Valve
Valve 3-WayBall
3-Way BallValve
Valve
90
90 Turn
Turn 180Turn
180 Turn

*The Diverter Valve design permits inlet flow through the bottom port. Outlet flow may be diverted to either valve side port.

Ball Valve Options Valve Maintenance

Pneumatic Actuator: Repair Kits: add R to the front of valve catalog
AO - Air-to-open/Spring to close (diverter style only) numbers for proper repair kit.
AC - Air-to-close/Spring to open (diverter style only)
AOC - Air-to-open-and-close (double action) (Example: R3B6S)
Electric Actuator:
EO1 - 120 volt AC 50/60 Hz
EO2 - 220 volt AC 50/60 Hz Consult your Parker Autoclave Engineers representative for
EO3 - 24 VDC pricing on repair kits. Refer to the Operation and
Maintenance manual for proper maintenance procedures.
Actuator Operating Temperature:
Pneumatic: 0F to 175F (-17C to 79C)
See ball valve actuator section for full description, additional information,
Electric: 0F to 160F (-17C to 71C) and options.
High Temperature Option:
HT - for media temperature up to 500F (260C)

All general terms and conditions of sale, including limitations of our liability, apply to all products and services sold. 5
Ball Valves - 1/2" 3-Way Series
Pressures to 10,000 psi (690 bar) .500 (12.7mm) Orifice

MAWP @ Minimum Orifice

Connection Room Temperature inches(mm)
SF750CX20 10,000 psi (690 bar) .500 (12.70)
SF1000CX20 10,000 psi (690 bar) .500 (12.70)
3/4 NPT 10,000 psi (690 bar) .500 (12.70)
1 NPT 10,000 psi (690 bar) .500 (12.70)
Valve Cv=4.4

MAWP: Maximum Allowable Working Pressure

STAINLESS STEEL HANDLE

PRESSURE TEMPERATURE RATINGS

TEMPERATURE C
(-18) (38) (93) (150) (204) (260)
ONE PIECE BALL
STOPPING DEVICE 15,000 (1034)
AND STEM
PACKING GLAND
SET SCREW

THRUST WASHER LOCKING PIECE

(690)

PRESSURE BAR
PRESSURE PSIG

STEM SEAL BELLEVILLE WASHERS 10,000

BELLEVILLE BACKUP NPT & SF CONNECTIONS
LOCKNUT SEAT GLAND

5,000 (345)

NPT connections rated 400F (204C) maximum.

O-RING 0
O-RING 100 200 300 400 500
O-RING

BOTTOM BEARING CARBON FILLED PEEK SEATS TEMPERATURE F

SEAT RETAINER
BOTTOM GLAND Pressure ratings are determined by the end connections chosen, see chart.
Note: Maximum side connection inlet pressure 10,000 psi (690 bar)

NOTE: Ball valves are not recommended for critical gas applications such as Hydrogen, Helium or other small molecular gases.

Ordering Procedure
For complete information on available end connections and material options, see next page. 3-way ball valves are furnished complete with
tube or pipe connections.

Typical catalog number: 3B 8 S 10 M12

3B 8 S 10 M12 XXX
Valve Ball Material Pressure End Connection Options
Series Orifice (X 1000 psi)
3B: 3-way Diameter S -316SS M12 - SF750CX20 HT - High Temperature
3BD: 3-way diverter
8-1/2 (For material options (See Chart on (Ball Valve Actuators,
(12.7 mm) contact factory) next page) see next page)
6 All general terms and conditions of sale, including limitations of our liability, apply to all products and services sold.
End Connection Options

Catalog End Connection MAWP @ Hex

Number Number Connection Room Temperature Inches(mm)

3B8S10M12 M12 SF750CX20 10,000 psi (690 bar) 1.75 (44.5)

3BD8S10M12
3B8S10M16 M16 SF1000CX20 10,000 psi (690 bar) 1.75 (44.5)
3BD8S10M16
3B8S10P12 P12 3/4 NPT 10,000 psi (690 bar) 1.75 (44.5)
3BD8S10P12
3B8S10P16 P16 1 NPT 10,000 psi (690 bar) 1.75 (44.5)
3BD8S10P16
MAWP: Maximum Allowable Working Pressure

See ball valve options for end connection details, material, and high temperature options.

OPEN OPEN OPEN CLOSED OPEN

*3-WayDiverter
*3-Way Diverter Valve
Valve 3-Way
3-WayBall
Ball Valve
Valve
90 Turn
90 Turn 180Turn
180 Turn

*The Diverter Valve design permits inlet flow through the bottom port. Outlet flow may be diverted to either valve side port.

Ball Valve Options Valve Maintenance

Pneumatic Actuator:
Repair Kits: add R to the front of valve catalog
AO - Air-to-open/Spring to close (diverter style only)
numbers for proper repair kit.
AC-Air-to-open/Spring to close (diverter style only)
(Example: R3B8S)
AOC - Air-to-open-and-close (double action)
Electric Actuator:
EO1 - 120 volt AC 50/60 Hz Consult your Parker Autoclave Engineers representative for
EO2 - 220 volt AC 50/60 Hz pricing on repair kits. Refer to the Operation and Maintenance
E03 - 24 VDC manual for proper maintenance procedures.
Actuator Operating Temperature:
See ball valve actuator section for full description, additional information,
Pneumatic: 0F to 175F (-17C to 79C) and options.
Electric: 0F to 160F (-17C to 71C)
High Temperature Option:
HT - for media temperature up to 500F (260C)

All general terms and conditions of sale, including limitations of our liability, apply to all products and services sold. 7
Ball Valve Dimensions - inches (mm)

VALVE MODELS
3B3S/3BD3S 3B6S/3BD6S 3B8S/3BD8S
E
5.64 6.55 7.83
A (143.35) (166.37) (198.79) D
4.72 5.74 7.77
B (119.94) (145.79) (197.36)

C
2.50 3.00 4.13 G K TYPICAL DIAMETER
(63.50) (76.20) (104.78)

BLOCK THICKNESS
D
3.37
(85.55)
4.99
(126.82)
5.12
(130.04)
H
3.90 5.52 10.25 J
E (99.02) (140.32) (260.35) TYPICAL

F
1.13 1.38 1.66
A F
(28.58) (34.93) (42.16)

G
1.50 2.00 3.00 L
(38.10) (50.80) (76.20)

0.75 1.00 1.50

H (19.05) (25.40) (38.10)

0.43 0.41 0.50

J (10.92) (10.31) (12.70)

0.28 0.28 0.28

K (7.11) (7.11) (7.11) M
2.25 2.88 3.34
L (57.15) (73.03) (84.94)

M
0.97 1.19 1.70 C
(24.64) (30.22) (43.18)
B
Block 1.00 1.38 1.75
Thickness (25.40) (34.92) (44.45)

Ball Valve Panel Mounting Dimensions - inches (mm)

C (Diameter)
VALVE MODELS
D (Typical Diameter)
3B3S/3BD3S 3B6S/3BD6S 3B8S/3BD8S See Note:

A 1.500 (38.10) 2.000 (50.80) 3.000 (76.20)

B 0.750 (19.05) 1.000 (25.40) 1.500 (38.10)

B
C 1.06 (26.92) 1.50 (38.10) 1.88 (47.63)
A
D 0.28 (7.11) 0.28 (7.11) 0.28 (7.11)
All dimensions are for reference only
and are subject to change without notice.
Note: Body mounting 1/4 - 20 thread

Offer of Sale
The items described in this document are available for sale by Parker Hannifin Corporation, its subsidiaries or its authorized distributors. Any sale contract entered by Parker will be governed by the provisions
stated in Parker's standard terms and conditions of sale (copy available upon request).

2013 Parker Hannifin Corporation | Autoclave Engineers is a registered trademark of the Parker Hannifin Corporation 02-0106SE January2013

Caution! Do not mix or interchange parts or tubing with those of

other manufacturers. Doing so is unsafe and will void warranty.

Instrumentation Products Division Parker Hannifin Manufacturing Ltd. Caution! Parker Autoclave Engineers Valves, Fittings and Tools are
not designed to work with common commercial instrument tubing
Autoclave Engineers Operation Instrumentation Products Division, Europe
and will only work with tubing built to Parker Autoclave Engineers
8325 Hessinger Drive Industrial Estate Whitemill AES Specifications. Failure to do so will void warranty.
Erie, Pennsylvania 16509-4679 USA Wexford, Republic of Ireland
PH: 814-860-5700 FAX: 814-860-5811 PH: 353 53 914 1566
8
www.autoclave.com
All general terms and conditions of sale, including limitations of our liability, apply to all products and services sold.
FAX: 353 53 914 1582 ISO-9001 Certified
Ball Valves
4-Way Series
Pressures to 10,000 psi (690 bar)

Parker Autoclave Engineers high-pressure ball valves have been

designed to provide superior quality for maximum performance
within a variety of valve styles, sizes, and process connections.
Some of the more unique design innovations include an integral
one-piece trunnion mounted style ball and stem that eliminates
the shear failure common in two piece designs, re-torqueable seat
glands that result in longer seat life, and a low friction stem seal that
reduces actuation torque and enhances cycle life.
These ball valves can also be modified to incorporate the use of
special materials, seals for high temperature applications, subsea
models, and valve actuators. Flow Configuration
When it comes to high-pressure applications, these ball valves
with the associated high-pressure components, provide the critical
performance demanded by the high pressure market.

Ball Valve Features:

One-piece, trunnion mounted style, stem design
eliminates shear failure found in two piece designs and
reduces the effects of side loading.
Re-torqueable seat glands for longer seat life.
4-Way
4-Way 4-Way
4-Way
Carbon filled PEEK seats offer excellent resistance to Crossover
Crossover
90 Turn
Switching
Switching
180 Turn
chemicals, heat, and wear/abrasion. 90 Turn 180 Turn

Full-port flow path minimizes pressure drop.

316 cold worked stainless steel construction.
Low friction pressure assisted graphite filled PTFE stem Applications:
Ball Valves - 4-Way Series
seal increases cycle life and reduces operating torque.
Laboratories
Quarter turn crossover, and the half turn four way
switching models available. Test Stands
Control Panels
Viton o-rings for operation from 0F (-17.8C) to 400F
(204C). Chemical Research
Optional o-rings available for high-temperature Pilot Plants
applications. Water Blast Pumping Unit
Optional wetted materials. High volume chemical injection
skids.
Wide selection of tube and pipe end fittings available.
Electric and pneumatic actuator options.

All general terms and conditions of sale, including limitations of our liability, apply to all products and services sold.
www.autoclave.com 1
Ball Valves - 4-Way Series (3/8 Orifice)
Pressures to 10,000 psi (690 bar) .375 (9.52mm) Orifice

MAWP @ Minimum Orifice

Connection Room Temperature inches(mm)
SW500 10,000 psi (690 bar) .375 (9.52)
SF375CX20 10,000 psi (690 bar) .203 (5.16)
SF562CX20 10,000 psi (690 bar) .312 (7.92)
SF750CX20 10,000 psi (690 bar) .375 (9.52)
1/4 NPT 10,000 psi (690 bar) .375 (9.52)
3/8 NPT 10,000 psi (690 bar) .375 (9.52)
1/2 NPT 10,000 psi (690 bar) .375 (9.52)
Valve Cv=2.5
MAWP: Maximum Allowable Working Pressure

STAINLESS STEEL HANDLE PRESSURE TEMPERATURE RATINGS

TEMPERATURE C
(-18) (38) (93) (150) (204) (260)
15,000 (1034)
STOPPING DEVICE
ONE PIECE BALL
AND STEM
PACKING GLAND
SET SCREW
10,000 (690)
PRESSURE PSIG

PRESSURE BAR
THRUST WASHER LOCKING PIECE
SW500 NPT & SF CONNECTIONS
STEM SEAL BELLEVILLE WASHERS
BELLEVILLE BACKUP
LOCKNUT SEAT GLAND

5,000 (345)

NPT connections rated 400F (204C) maximum.

0
100 200 300 400 500
TEMPERATURE F
O-RING Pressure ratings are determined by the end connections chosen, see chart.
O-RING
BOTTOM BEARING SEAT RETAINER CARBON FILLED PEEK SEATS

NOTE: Ball valves are not recommended for critical gas applications such as Hydrogen, Helium or other small molecular gases.

Ordering Procedure
For complete information on available end connections and material options, see next page. 4-way ball valves are furnished complete with
tube or pipe connections.

Typical catalog number: 4B 6 S 10 M9

4B 6 S 10 M9 XXX
Valve Ball Material Pressure End Connection Options
Series Orifice (X 1000 psi)
4B: 4-way crossover Diameter S -316SS M9 - SF562CX20 HT - High Temperature
4BS: 4-way switching
6-3/8 (For material options (See Chart on (Ball Valve Actuators,
(9.52 mm) contact factory) next page) see next page)

2 All general terms and conditions of sale, including limitations of our liability, apply to all products and services sold.
End Connection Options

Catalog End Connection MAWP @ Hex

Number Number Connection Room Temperature Inches(mm)

4B6S10L8 L8 SW500 10,000 psi (690 bar) 1.38 (35.05)

4BS6S10L8
4B6S10M6 M6 SF375CX20 10,000 psi (690 bar) 1.38 (35.05)
4BS6S10M6
4B6S10M9 M9 SF562CX20 10,000 psi (690 bar) 1.38 (35.05)
4BS6S10M9
4B6S10M12 M12 SF750CX20 10,000 psi (690 bar) 1.38 (35.05)
4BS6S10M12
4B6S10P4 P4 1/4 NPT 10,000 psi (690 bar) 1.38 (35.05)
4BS6S10P4
4B6S10P6 P6 3/8 NPT 10,000 psi (690 bar) 1.38 (35.05)
4BS6S10P6
4B6S10P8 P8 1/2 NPT 10,000 psi (690 bar) 1.38 (35.05)
4BS6S10P8
MAWP: Maximum Allowable Working Pressure
See ball valve option/details section for end connection details, material, and high temperature options.

C C C C C

B D B D
B D B D B D

A A
A A A

C C
C C C
B D B D
B D B D B D
A A
A A A

44-Way Crossover
Way Crossover
4-Way Switching
90 Turn
90 Turn 4-Way Switching
180 Turn
180"D"
(supplied with Turn
port plugged)
(supplied with "D" port plugged)

Ball Valve Options Valve Maintenance

Pneumatic Actuator: Repair Kits: add R to the front of valve catalog
AO - Air-to-open/Spring to close first 4 (5 for switching) numbers for proper
AC - Air-to-close/Spring to open repair kit.
AOC - Air-to-open-and-close (double action) (Example: R4B6S)
Electric Actuator:
EO1 - 120 volt AC 50/60 Hz
EO2 - 220 volt AC 50/60 Hz Consult your Parker Autoclave Engineers representative for
EO3 - 24 VDC pricing on repair kits. Refer to the Operation and
Maintenance manual for proper maintenance procedures.
Actuator Operating Temperature:
Pneumatic: 0F to 175F (-17C to 79C)
Electric: 0F to 160F (-17C to 71C)
Note: Consult factory for additional actuator information.
High Temperature Option: HT for media temperatures up to 500F (260)
HT - for media temperature up to 500F (260C)
All general terms and conditions of sale, including limitations of our liability, apply to all products and services sold. 3
Ball Valve Dimensions - inches (mm)

VALVE MODELS
4B6S/4BS6S E
5.81 D
A (147.57)

6.79
B (172.47)
G K DIAMETER TYPICAL
3.50
C (88.90)
H BLOCK THICKNESS
5.13
D (130.18)
J
10.25 A TYPICAL
E (260.35)

1.63
F
F (41.28)
L
2.63
G (66.68)

1.13
H (33.34)

0.41
J (10.32) C/2

K 0.28 C
(7.11)
B
2.97 TYPICAL
L (75.39)

Block 3.50
Thickness (88.90)

Ball Valve Panel Mounting Dimensions - inches (mm)

C (Diameter)
VALVE MODELS
D (Typical Diameter)
4B6S/4BS6S See Note:

2.63
A (66.68)

1.31
B (33.34) B
1.88
C (47.63) A
All dimensions are for reference only
0.28
D (7.11)
and are subject to change without notice.

Note: Body mounting 1/4 - 20 threads

Offer of Sale
The items described in this document are available for sale by Parker Hannifin Corporation, its subsidiaries or its authorized distributors. Any sale contract entered by Parker will be governed by the provisions
stated in Parker's standard terms and conditions of sale (copy available upon request).

2013 Parker Hannifin Corporation | Autoclave Engineers is a registered trademark of the Parker Hannifin Corporation 02-0107SE January2013

Caution! Do not mix or interchange parts or tubing with those of

other manufacturers. Doing so is unsafe and will void warranty.

Instrumentation Products Division Parker Hannifin Manufacturing Ltd. Caution! Parker Autoclave Engineers Valves, Fittings and Tools are
Autoclave Engineers Operation Instrumentation Products Division, Europe not designed to work with common commercial instrument tubing
and will only work with tubing built to Parker Autoclave Engineers
8325 Hessinger Drive Industrial Estate Whitemill
AES Specifications. Failure to do so will void warranty.
Erie, Pennsylvania 16509-4679 USA Wexford, Republic of Ireland
PH: 814-860-5700 FAX: 814-860-5811 PH: 353 53 914 1566
4
www.autoclave.com
All general terms and conditions of sale, including limitations of our liability, apply to all products and services sold.
FAX: 353 53 914 1582 ISO-9001 Certified
Ball Valves
Double Block and Bleed

6DB Series
Pressures to 15,000 psi (1035 bar)

Parker Autoclave Engineers series 6DB double block valve

is a two-stem ball valve providing an economical and
convenient method of blocking and bleeding in
applications such as pressure monitoring and test,
chemical injection and drain line isolation. This full port
quarter turn double ball valve is designed for operation
up to 15,000 psi (1034 bar).

Double Block and Bleed Features:

One piece, trunnion mounted stem design elimi-

nates shear failure and reduces the effects of side
loading found in two piece designs.
Re-torqueable seat glands for longer seat life.
Carbon filled PEEK seats offer excellent resistance
to chemicals, heat and wear/abrasion.
Vee-stem vent valve.
Full-port flow path minimizes pressure drop.
316 cold worked stainless steel construction.
Low friction pressure assisted graphite filled PTFE stem seal increases cycle life
and reduces operating torque.
Quarter turn from open to close with positive stop.
Viton o-rings for operation from 0F (-17.8C) to 400F (204C).
Ball Valves - 6DB Series
Parker Autoclave Engineers valves are complemented by a complete line of fittings, tubings
and accessories. The 6DB Series is available with various connections and options.
Double Block and Bleed

www.autoclave.com
Ball Valves - 6DB Series
Pressures to 15,000 psi (1034 bar) .328 (8.33mm) Orifice

MAWP @ Minimum Orifice

Connection Room Temperature inches(mm)
SW500 10,000 psi (690 bar) .328 (8.33)
SF375CX20 15,000 psi (1034 bar) .203 (5.16)
SF562CX20 15,000 psi (1034 bar) .312 (7.92)
SF750CX20 15,000 psi (1034 bar) .328 (8.33)
1/4 NPT 15,000 psi (1034 bar) .328 (8.33)
3/8 NPT 15,000 psi (1034 bar) .328 (8.33)
1/2 NPT 15,000 psi (1034 bar) .328 (8.33)
Valve Cv=2.3
MAWP: Maximum Allowable Working Pressure
Cv calculated with both ball valves open and the needle valve closed.
Cv listed is for maximum orifice size of .328 inches only.
Consult factory for Cv of valves with reduced orifice sizes.

PRESSURE TEMPERATURE RATINGS

TEMPERATURE C
(-18) (38) (93) (150) (204) (260)

15,000 (1034)
SF & NPT CONNECTIONS
PRESSURE PSIG

PRESSURE BAR

(690)
10,000
SW500 CONNECTION

5,000 (345)

NPT connections rated 400F (204C) maximum.

0
100 200 300 400 500
TEMPERATURE F

Pressure ratings are determined by the end connections chosen, see chart.

STAINLESS STEEL HANDLE STAINLESS STEEL HANDLE

STOPPING DEVICE

BELLEVILLE WASHERS BELLEVILLE WASHERS

PACKING GLAND
LOCK NUT LOCK NUT
LOCKING PIECE
SEAT GLANDS SEAT GLANDS
THRUST WASHER
SPRING ENERGIZED
SEALS
SEATS

O-RING O-RING

BEARING BEARING

BOTTOM GLAND
VENT CONNECTION BOTTOM GLAND
on back side

VENT VALVE

NOTE: Ball valves are not recommended for critical gas applications such as Hydrogen, Helium or other small molecular gases.
Ordering Procedure
For complete information on available end connections, see end connections options below. 6DB Series ball valves are furnished complete with
tube or pipe connections.

Typical catalog number: 6DB 15 M9 M4 -XXX

6DB 15 M9 M4 XXX
Valve Pressure Tube Vent Connection HT - High Temperature
Series (X 1000 psi) Connection M4 - SF250CX20
6DB: 3/8 Double Block M9 - SF562CX20 (see chart below)
(see chart below)

Connection Options
Catalog Tube Connection MAWP @ Hex Vent Connection Vent
Number Number Connection Room Temperature Inches(mm) Number Connection

6DB10L8P4 L8 SW500 10,000 psi (690 bar) 1.38 (35.05) P4 1/4" NPT

6DB15M4M4 M4 SF250CX20 15,000 psi (1034 bar) 1.38 (35.05) M4 SF250CX20

6DB15M6M4 M6 SF375CX20 15,000 psi (1034 bar) 1.38 (35.05) M4 SF250CX20

6DB15M9M4 M9 SF562CX20 15,000 psi (1034 bar) 1.38 (35.05) M4 SF250CX20

6DB15M12M4 M12 SF750CX20 15,000 psi (1034 bar) 1.38 (35.05) M4 SF250CX20

6DB15M9P4 M9 SF562CX20 15,000 psi (1034 bar) 1.38 (35.05) P4 1/4" NPT

6DB15M16P4 M16 SF1000CX20 15,000 psi (1034 bar) 1.75 (44.45) P4 1/4" NPT

6DB15P4P4 P4 1/4" NPT 15,000 psi (1034 bar) 1.38 (35.05) P4 1/4" NPT

6DB15P6P4 P6 3/8" NPT 15,000 psi (1034 bar) 1.38 (35.05) P4 1/4" NPT

6DB15P8P4 P8 1/2" NPT 15,000 psi (1034 bar) 1.38 (35.05) P4 1/4" NPT

MAWP: Maximum Allowable Working Pressure

Ball Valve Options Valve Maintenance

High Temperature Option: Consult your Parker Autoclave Engineers representative for
HT - for media temperature up to 500F (260C) pricing on repair kits. Refer to the Operation and Mainte-
nance manual for proper maintenance procedures.
See ball valve options/details for full description, connection
details and high temperature options.

For material options consult factory.

Ball Valve Dimensions - inches (mm)

VALVE MODEL 6DB

E
7.14
A (181.36)
D D
8.81
B (223.77)
6.00
C (152.40)
1.50 G
D (38.10) K-TYP
DIAMETER
12.94 J
E (328.68) O
1.38
F (34.92)
5.00 F
G (127.00) A
3.00
H (76.2) M
0.41 L
J (10.30)
0.28
K (7.14)
N
3.19
L (81.03)
2.38
M (60.40)
0.65
N (16.51)
H
0.50
O (12.70) C
Block 1.75 B
Thickness (44.45)

Ball Valve Panel Mounting Dimensions - inches (mm)

3.00
(76.20)
0.28 dia
(7.11) typ
(4) Places
See Note

1.50 1.00 1.50 1.00

(29.21) (25.4) (29.21) (25.4)

2.00 2.00
(50.80) (50.80)

All dimensions are for reference only

and are subject to change without notice.

NOTE: Body Top Mounting 1/4-20 Thread

Offer of Sale
The items described in this document are available for sale by Parker Hannifin Corporation, its subsidiaries or its authorized distributors. Any sale contract entered by Parker will be governed by the provisions
stated in Parker's standard terms and conditions of sale (copy available upon request).

2013 Parker Hannifin Corporation | Autoclave Engineers is a registered trademark of the Parker Hannifin Corporation 02-1258SE January2013

Caution! Do not mix or interchange parts or tubing with those of

other manufacturers. Doing so is unsafe and will void warranty.

Caution! Parker Autoclave Engineers Valves, Fittings and Tools are

Instrumentation Products Division Parker Hannifin Manufacturing Ltd.
not designed to work with common commercial instrument tubing
Autoclave Engineers Operation Instrumentation Products Division, Europe and will only work with tubing built to Parker Autoclave Engineers
8325 Hessinger Drive Industrial Estate Whitemill AES Specifications. Failure to do so will void warranty.
Erie, Pennsylvania 16509-4679 USA Wexford, Republic of Ireland
PH: 814-860-5700 FAX: 814-860-5811 PH: 353 53 914 1566
www.autoclave.com FAX: 353 53 914 1582 ISO-9001 Certified
Ball Valves
Subsea Series
Internal Pressures to 20,000 psi (1379 bar)
Water Depths to 12,500 ft (3810 meters)

Parker Autoclave Engineers subsea ball valves have been designed

to fulfill the ever growing demand in the petroleum industry as
well as the need for externally pressurized components in other
markets. Utilizing the same design technology as the standard
ball valve, the subsea design incorporates the necessary design
alterations to provide a reliable externally pressurized valve for the
subsea industry.
With the availability of fittings, tubing, and related equipment our
ball valves can provide all your needs on high-pressure applica-
tions above or below the surface.

Ball Valve Features:

One-piece, trunnion mounted style, stem design
eliminates shear failure found in two-piece designs.
Re-torqueable seat glands for longer seat life.
PEEK seats which offer excellent resistance to chemicals,
heat, and wear/abrasion.
Full-port flow path minimizes pressure drop.
316 cold worked stainless steel construction.
Buna-N o-ring standard 250F (121C) max.
Low friction pressure assisted graphite filled PTFE stem Adaptable for Remote Operated Vehicle (ROV) operation by customer

seal increases cycle life.

Wide selection of tube and pipe end fittings available.

Ball Valves - Subsea Series

Applications:
Available to NACE MR-01-75.
Optional wetted materials. Subsea hydraulic manifolds
Available in a number of flow configurations and port Subsea control panels
sizes. Subsea trees

www.autoclave.com
The Parker Autoclave Engineers ball valves can be utilized to
switch or isolate flow. The standard material of construction of
the valve is 316 cold worked stainless steel with PEEK seats,
graphite filled PTFE stem seal, and o-ring material as required
by the process fluid.

The subsea ball valve design incorporates additional o-ring

seals, which prevent the ingress of seawater into the valve
which would adversely affect the operation of the valve as well
as contaminate the process fluid. A significant feature of the
subsea design is a thrust washer positioned under the stem
preventing outside sea water from moving the stem from its
aligned position.

Subsea ball valves are designed to facilitate operation by a

Remote Operated vehicle (ROV). ROV operator assemblies are
used for valve mounting and to provide positive stopping for
precise 90 operation.

Various tube and pipe connections are available throughout a

variety of valve configurations with standard port sizes from
3/16 to 1. Contact Parker Autoclave Engineers technical
sales support or your local distributor for more information
on optional materials of construction, seal materials and ROV
operator designs to fit your application requirements.

2
Ball Valves - 2-Way Subsea Series (1/4 Orifice)
Pressures to 20,000 psi (1379 bar) .250 (6.35mm) Orifice

MAWP @ Minimum Orifice

Connection Room Temperature inches(mm)
W125 15,000 psi (1034 bar) .094 (2.39)
SW250 15,000 psi (1034 bar) .128 (3.25)
SW375 15,000 psi (1034 bar) .250 (6.35)
SW500 10,000 psi (690 bar) .250 (6.35)
SF250CX20 20,000 psi (1379 bar) .109 (2.77)
SF375CX20 20,000 psi (1379 bar) .203 (5.16)
SF562CX20 20,000 psi (1379 bar) .250 (6.35)
F250C 20,000 psi (1379 bar) .094 (2.39)
F375C 20,000 psi (1379 bar) .125 (3.17)
F562C 20,000 psi (1379 bar) .188 (4.77)
1/8 NPT 15,000 psi (1034 bar) .250 (6.35)
1/4 NPT 15,000 psi (1034 bar) .250 (6.35)
3/8 NPT 15,000 psi (1034 bar) .250 (6.35)
1/2 NPT 15,000 psi (1034 bar) .250 (6.35)
PRESSURE TEMPERATURE RATINGS
Valve Cv=1.51 TEMPERATURE C

MAWP: Maximum Allowable Working Pressure (-18) (38) (93) (150) (204) (260)
Cv listed is for maximum orifice size of .250 inches only. 20,000 (1379)
SF & F CONNECTIONS
Consult factory for Cv of valves with reduced orifice sizes.

15,000 (1034)
W125, SW250, SW375, & NPT CONNECTIONS
PRESSURE PSIG

PRESSURE BAR
ONE PIECE BALL STEM

10,000 (690)
PACKING GLAND SW500 CONNECTION
LOCKING PIECE
THRUST WASHER
O-RING
SPRING ENERGIZED SEAL
O-RING
5,000 (345)
PEEK SEATS
SEAT GLAND

NPT connections rated 400F (204C) maximum.

0
100 200 300 400 500
TEMPERATURE F

Pressure ratings are determined by the end connections chosen, see chart.
O-RING
BEARING Maximum temperature rating is determined by the o-ring material
SEAT RETAINER
(see descriptions below).
BOTTOM THRUST WASHER
O-RING
LOCKING PIECE
Maximum pressure rating is determined by the end connection
BOTTOM GLAND
(see table above).

NOTE: Ball valves are not recommended for critical gas applications such as Hydrogen, Helium or other small molecular gases.

Ordering Procedure
For complete information on available end connections, see next page. 2-way ball valves are furnished complete with tube or pipe connections.
Standard valve has Buna-N o-rings [250F (121C)] max.

Typical catalog number: S2B 4 S 20 M9

S2B 4 S 20 M9 XXX
Valve Ball Material Pressure End Connection Options
Series Orifice (X 1000 psi)
Subsea-2-way Diameter S - 316SS M9 - SF562CX20 V - Viton: 400F (204C) max
(See Chart on EPDM - Ethylene Propylene: 250F (121C) max
4-1/4 (For material options
contact factory) next page)
(6.35mm)
3
End Connection Options
Seat Gland
Catalog End Connection MAWP @ Hex
Number Number Connection Room Temperature Inches(mm)
S2B4S15L2 L2 W125 15,000 psi (1034 bar) 1 (25.40)
S2B4S15L4 L4 SW250 15,000 psi (1034 bar) 1 (25.40)
S2B4S15L6 L6 SW375 15,000 psi (1034 bar) 1 (25.40)
S2B4S10L8 L8 SW500 10,000 psi (690 bar) 1 (25.40)
S2B4S20M4 M4 SF250CX20 20,000 psi (1379 bar) 1 (25.40)
S2B4S20M6 M6 SF375CX20 20,000 psi (1379 bar) 1 (25.40)
S2B4S20M9 M9 SF562CX20 20,000 psi (1379 bar) 1 (25.40)
S2B4S20H4 H4 F250C 20,000 psi (1379 bar) 1 (25.40)
S2B4S20H6 H6 F375C 20,000 psi (1379 bar) 1 (25.40)
S2B4S20H9 H9 F562C 20,000 psi (1379 bar) 1.38 (35.05)
S2B4S15P2 P2 1/8 NPT 15,000 psi (1034 bar) 1 (25.40)
S2B4S15P4 P4 1/4 NPT 15,000 psi (1034 bar) 1 (25.40)
S2B4S15P6 P6 3/8 NPT 15,000 psi (1034 bar) 1 (25.40)
S2B4S15P8 P8 1/2 NPT 15,000 psi (1034 bar) 1.38 (35.05)
1.50
MAWP: Maximum Allowable Working Pressure
(38.1) 1/4-20 THD
0.75
See ball valve option/details section for end connection details, material, and high temperature options.
(19.1)

1.50
(38.1) 1/4-20 THD
0.75
(19.1)

0.50
(12.7)

0.81 HEX
0.50 1.00 (20.6)
(12.7) (25.4)

0.81 HEX
1.00 (20.6)
(25.4)

NOTE:
0.50 FLAT LG
(12.7) 0.216 0.001 FLAT 1. MAWP (See Table)
(5.48 .025)
2. Maximum Sea Depth
12,500 FT (3811 meters)
0.50 FLAT LG
(12.7)
0.249
0.216 0.001
(6.32
0.001
.025)
FLAT 3. Maximum External Pressure
(5.48 .025)
5,500 psi (379 bar)
1.27
(32.4)
0.249 0.001
(6.32 .025)
0.25
(6.4)
1.27 0.28
(32.4) (7.1)

0.25
0.43 (6.4)
0.28 (10.9)
(7.1)

4.31
1.50 0.43 (109.3)
(38.1) (10.9)

4.31
1.50 (109.3)
(38.1)

SEE END
CONNECTION
OPTIONS
(both ends)

SEE END
1.19 SEE SEAT
CONNECTION
(30.2) GLAND HEX
OPTIONS
HEX (both ends)

1.19 SEE SEAT

(30.2) GLAND HEX
HEX
0.31
(7.7)
2.00
(50.8)
4.18
Dimensions for reference only
4 0.31 (106.3) and subject to change.
(7.7)
2.00
(50.8)
4.18
(106.3)
Ball Valves - 2-Way Subsea Series (3/8 Orifice)
Pressures to 20,000 psi (1379 bar) .375 (9.52mm) Orifice

MAWP @ Minimum Orifice

Connection Room Temperature inches(mm)
SW500 10,000 psi (690 bar) .375 (9.52)
SF375CX20 20,000 psi (1379 bar) .203 (5.16)
SF562CX20 20,000 psi (1379 bar) .312 (7.92)
SF750CX20 20,000 psi (1379 bar) .375 (9.52)
1/4 NPT 15,000 psi (1034 bar) .375 (9.52)
3/8 NPT 15,000 psi (1034 bar) .375 (9.52)
1/2 NPT 15,000 psi (1034 bar) .375 (9.52)
Valve Cv=3.51
MAWP: Maximum Allowable Working Pressure
Cv listed is for maximum orifice size of .375 inches only.
Consult factory for Cv of valves with reduced orifice sizes.

PRESSURE TEMPERATURE RATINGS

TEMPERATURE C
(-18) (38) (93) (150) (204) (260)
ONE PIECE BALL STEM 20,000 (1379)
O-RING SF CONNECTION

PACKING GLAND (1034)

15,000
LOCKING PIECE NPT CONNECTION
PRESSURE PSIG

PRESSURE BAR
THRUST WASHER

SPRING ENERGIZED O-RING

SEAL
PEEK SEATS 10,000 (690)
SEAT GLAND SW500 CONNECTION

5,000 (345)

NPT connections rated 400F (204C) maximum.

O-RING 0
100 200 300 400 500
BEARING SEAT RETAINER
TEMPERATURE F
O-RING BOTTOM THRUST WASHER

BOTTOM GLAND LOCKING PIECE Pressure ratings are determined by the end connections chosen, see chart.

Maximum temperature rating is determined by the o-ring material

(see descriptions below).
Maximum pressure rating is determined by the end connection
(see table above).

NOTE: Ball valves are not recommended for critical gas applications such as Hydrogen, Helium or other small molecular gases.

Typical catalog number: S2B 6 S 20 M9

S2B 6 S 20 M9 XXX
Valve Ball Material Pressure End Connection Options
Series Orifice (X 1000 psi)
Subsea-2-way Diameter S - 316SS M9 - SF562CX20 V - Viton: 400F (204C) max
(See Chart on EPDM - Ethylene Propylene: 250F (121C) max
6-3/8 (For material options
next page)
(9.52 mm) contact factory)
5
End Connection Options
Seat Gland
Catalog End Connection MAWP @ Hex
Number Number Connection Room Temperature Inches(mm)

S2B6S10L8 L8 SW500 10,000 psi (690 bar) 1.38 (35.05)

S2B6S20M6 M6 SF375CX20 20,000 psi (1379 bar) 1.38 (35.05)

S2B6S20M9 M9 SF562CX20 20,000 psi (1379 bar) 1.38 (35.05)

S2B6S20M12 M12 SF750CX20 20,000 psi (1379 bar) 1.38 (35.05)

S2B6S15P4 P4 1/4 NPT 15,000 psi (1034 bar) 1.38 (35.05)

S2B6S15P6 P6 3/8 NPT 15,000 psi (1034 bar) 1.38 (35.05)

S2B6S15P8 P8 1/2 NPT 15,000 psi (1034 bar) 1.38 (35.05)

MAWP: Maximum Allowable Working Pressure

See ball valve option/details section for end connection details, material, and high temperature options.
2.50
(63.5)

1.25
(31.8)
2.50
(63.5)

1.25 0.69
(31.8) (17.5)
1.38
0.88 (34.9)
(22.3) BODY
THICKNESS
0.69
(17.5)
1.38
0.88 (34.9)
(22.3) BODY
0.44 HEX THICKNESS
1.38
(11.1) 0.94 (35.1) 5/16-18 THRD
(23.9) .59 DEEP TYP
(4) PLACES

0.44 HEX 1.38

(11.1) 0.94 (35.1) 5/16-18 THRD
(23.9) .59 DEEP TYP
(4) PLACES

0.375 0.001 SQUARE NOTE:

1.25
(9.35 0.02)
1. MAWP (See Table)
(31.8) 2. Maximum Sea Depth
0.375 0.001 SQUARE
(9.35 0.02)
11,500 FT (3505 meters)
1.25 3. Maximum External Pressure
(31.8) 0.44
(11.1) 5,000 psi (345 bar)

1.03 0.44
(26.2) (11.1)

1.03
(26.2)
5.78
(146.8) 0.44
(26.2)

5.78 1.78
(146.8) 0.44 (45.2)
(26.2)

1.78
(45.2)3.28
(83.3)

3.28
(83.3)
SEE END
CONNECTION
OPTIONS
(both ends)
1.75 HEX SEE END
(44.5) CONNECTION
OPTIONS
(both ends)
SEE SEAT
1.75 HEX
0.76 GLAND HEX
(44.5)
(19.2)

SEE SEAT
3.00 0.76 GLAND HEX
(76.2) (19.2)
5.53
(140.3)
3.00
(76.2)
Dimensions for reference only
6 5.53 and subject to change.
(140.3)
Ball Valves - 2-Way Subsea Series (1/2 Orifice)
Pressures to 15,000 psi (1034 bar) .500 (12.7mm) Orifice

MAWP @ Minimum Orifice

ONE PIECE BALL STEM

PRESSURE TEMPERATURE RATINGS

O-RING TEMPERATURE C
PACKING GLAND
(-18) (38) (93) (150) (204) (260)
LOCKING PIECE 15,000 (1034)
THRUST WASHER SF CONNECTIONS
O-RING
SPRING
ENERGIZED PEEK SEATS
(690)
PRESSURE PSIG

10,000

PRESSURE BAR
SEAL
SEAT GLAND NPT CONNECTIONS

5,000 (345)

NPT connections rated 400F (204C) maximum.

0
O-RING 100 200 300 400 500

O-RING SEAT RETAINER TEMPERATURE F

LOCKING PIECE BOTTOM THRUST WASHER

Pressure ratings are determined by the end connections chosen, see chart.
BOTTOM GLAND
Maximum temperature rating is determined by the o-ring material
(see descriptions below).
Maximum pressure rating is determined by the end connection
(see table above).

NOTE: Ball valves are not recommended for critical gas applications such as Hydrogen, Helium or other small molecular gases.

Typical catalog number: S2B 8 S 15 M12

S2B 8 S 15 M12 XXX

Valve Ball Material Pressure End Connection Options
Series Orifice (X 1000 psi)
Subsea-2-way Diameter S - 316SS M12 - SF750CX20 V - Viton: 400F (204C) max
(See Chart on EPDM - Ethylene Propylene: 250F (121C) max
8-1/2 (For material options
next page)
(12.7 mm) contact factory)

7
End Connection Options
Seat Gland
Catalog End Connection MAWP @ Hex
Number Number Connection Room Temperature Inches(mm)

S2B8S15M12 M12 SF750CX20 15,000 psi (1034 bar) 1.75 (44.5)

S2B8S15M16 M16 SF1000CX20 15,000 psi (1034 bar) 1.75 (44.5)

S2B8S10P12 P12 3/4 NPT 10,000 psi (690 bar) 1.75 (44.5)

S2B8S10P16 P16 1 NPT 10,000 psi (690 bar) 1.75 (44.5)

MAWP: Maximum Allowable Working Pressure

See ball valve option/details section3.00
for end connection details, material, and high temperature options.
(76.2)

0.50
(12.7) 1.75
1.00 (44.5)
(25.4) BODY
THICKNESS
3.00
(76.2)

1.50 1.50
(38.1) (38.1)

(4) 5/16-18 TAP 0.50

.500 DEEP (12.7) 1.75
1.00 (44.5)
(25.4) BODY
THICKNESS

1.50 1.50
(38.1) (38.1)

(4) 5/16-18 TAP

.500 DEEP

0.438 0.001 SQUARE NOTE:

0.88
(22.2)
(11.13 0.021) 1. MAWP (See Table)
2. Maximum Sea Depth
0.62 11,500 FT (3505 meters)
(15.9)
3. Maximum External Pressure
5,000 psi (345 bar)
0.77
(19.6) 0.438 0.001 SQUARE
0.88 (11.13 0.021)
(22.2)

0.44
(11.1) 0.62
6.44 (15.9)
(163.5)
2.08
(52.8)

0.77
4.00 (19.6)
(101.6)

0.44
(11.1) SEE END
6.44 CONNECTION
(163.5) OPTIONS
2.08 (both ends)
(52.8)

SEE SEAT
4.00 GLAND HEX
(101.6)
2.25 HEX
(57.2)
SEE END
0.88 CONNECTION
(22.4) OPTIONS
(both ends)

SEE SEAT
4.13 GLAND HEX
(104.8)
7.73 2.25 HEX
(196.4) (57.2)
Dimensions for reference only
0.88 and subject to change.
(22.4)

4.13
(104.8)
7.73
(196.4)

8
Ball Valves - 2-Way Subsea Series (3/4 Orifice)
Pressures to 15,000 psi (1034 bar) .750 (19mm) Orifice

MAWP @ Minimum Orifice

Connection Room Temperature Inches (mm)
SF750CX10 15,000 psi (1034 bar) .516 (13.10)
SF1000CX10 15,000 psi (1034 bar) .688 (17.47)
1/2 NPT 15,000 psi (1034 bar) .688 (17.47)
3/4 NPT 10,000 psi (690 bar) .75 (19.05)
1 NPT 10,000 psi (690 bar) .75 (19.05)
Valve Cv=21
MAWP: Maximum Allowable Working Pressure
Cv listed is for maximum orifice size of .750 inch only.
Consult factory for Cv of valves with reduced orifice sizes.

ONE PIECE BALL STEM

PRESSURE TEMPERATURE RATINGS

O-RING TEMPERATURE C
PACKING GLAND
(-18) (38) (93) (150) (204) (260)
LOCKING PIECE 15,000 (1034)
THRUST WASHER SF750CX, SF1000CX, 1/2 NPT
O-RING
SPRING
ENERGIZED PEEK SEATS
(690)
PRESSURE PSIG

10,000

PRESSURE BAR
SEAL
SEAT GLAND 3/4 & 1 NPT

5,000 (345)

NPT connections rated 400F (204C) maximum.

0
O-RING 100 200 300 400 500
SEAT RETAINER TEMPERATURE F
O-RING
LOCKING PIECE BOTTOM THRUST WASHER
Pressure ratings are determined by the end connections chosen, see chart.
BOTTOM GLAND
Maximum temperature rating is determined by the o-ring material
(see descriptions below).
Maximum pressure rating is determined by the end connection
(see table above).

NOTE: Ball valves are not recommended for critical gas applications such as Hydrogen, Helium or other small molecular gases.

Typical catalog number: S2B 12 S 15 M12

S2B 12 S 15 M12 XXX

Valve Ball Material Pressure End Connection Options
Series Orifice (X 1000 psi)
Subsea-2-way Diameter S - 316SS M12 - SF750CX10 V - Viton: 400F (204C) max
(See Chart on EPDM - Ethylene Propylene: 250F (121C) max
12-3/4 (For material options
next page)
(19.05 mm) contact factory)

9
End Connection Options
Seat Gland
Catalog End Connection MAWP @ Hex
Number Number Connection Room Temperature Inches(mm)

S2B12S15M12 M12 SF750CX20 15,000 psi (1034 bar) 1.88 (47.8)

S2B12S15M16 M16 SF1000CX20 15,000 psi (1034 bar) 1.88 (47.8)

S2B12S15P8 P8 1/2 NPT 15,000 psi (1034 bar) 1.88 (47.8)

S2B12S10P12 P12 3/4 NPT 10,000 psi (690 bar) 1.88 (47.8)

S2B12S10P16 P16 1 NPT 10,000 psi (690 bar) 1.88 (47.8)

MAWP:(88.9)
Maximum Allowable Working Pressure
3.50

See ball valve option/details section for end connection details, material, and high temperature options.

0.75
(19.05) 3.00
1.50 (76.2)
(38.10) BODY
THICKNESS
3.50
(88.9)

2.25 1.75
(57.2) (44.45)
(4) 3/8-16 TAP 0.75
(19.05) 3.00
.625 DEEP 1.50 (76.2)
(38.10) BODY
THICKNESS

2.25 1.75
(57.2) (44.45)
(4) 3/8-16 TAP
.625 DEEP

0.750 0.001 SQUARE

NOTE:
1.50
(38.10)
(19.05 0.021) 1. MAWP (See Table)
2. Maximum Sea Depth
.938 11,500 FT (3505 meters)
(23.81)
3. Maximum External Pressure
5,000 psi (345 bar)
.980
(24.89) 0.750 0.001 SQUARE
1.50 (19.05 0.021)
(38.10)

0.50
(12.70) .938
8.58 (23.81)
(217.93)
2.67
(67.9)

.980
5.31 (24.89)
(134.9)

0.50
(12.70) SEE END
8.58 CONNECTION
(217.93) OPTIONS
2.67 (both ends)
(67.9)

SEE SEAT
5.31 GLAND HEX
(134.9)
2.25 HEX
(57.2)
SEE END
0.75 CONNECTION
(19.05) OPTIONS
(both ends)

SEE SEAT
4.50 GLAND HEX
(114.30)
9.18 2.25 HEX
(233.10) (57.2)
Dimensions for reference only
0.75
(19.05)
and subject to change.

4.50
(114.30)
9.18
(233.10)

10
Ball Valves - 2-Way Subsea Series (1 Orifice)
Pressures to 10,000 psi (690 bar) 1.00 (25.4mm) Orifice

MAWP @ Minimum Orifice

Connection Room Temperature Inches (mm) Valve CV

SF1500CX 10,000 psi (690 bar) .938 (23.83) 30

3/4 NPT 10,000 psi (690 bar) 1.00 (25.40) 34
1 NPT 10,000 psi (690 bar) 1.00 (25.40) 34

MAWP: Maximum Allowable Working Pressure

ONE PIECE BALL STEM

PRESSURE TEMPERATURE RATINGS

O-RING TEMPERATURE C
PACKING GLAND
(-18) (38) (93) (150) (204) (260)

THRUST WASHER
LOCKING PIECE 15,000 (1034)
O-RING
SPRING
ENERGIZED PEEK SEATS
(690)
PRESSURE PSIG

10,000

PRESSURE BAR
SEAL
SEAT GLAND SF & NPT CONNECTIONS

5,000 (345)

NPT connections rated 400F (204C) maximum.

NOTE: Ball valves are not recommended for critical gas applications such as Hydrogen, Helium or other small molecular gases.

Typical catalog number: S2B 16 S 10 P16

S2B 16 S 10 P16 XXX

Valve Ball Material Pressure End Connection Options
Series Orifice (X 1000 psi)
Subsea-2-way Diameter S - 316SS P16 - 1 NPT V - Viton: 400F (204C) max
(See Chart on EPDM - Ethylene Propylene: 250F (121C) max
16-1 (For material options
next page)
(25.4 mm) contact factory)

11
End Connection Options
Seat Gland
Catalog End Connection MAWP @ Hex
Number Number Connection Room Temperature Inches(mm)

S2B16S10M24 M24 SF1500CX 10,000 psi (690 bar) 1.88 (47.75)

S2B16S10P12 P12 3/4 NPT 10,000 psi (690 bar) 1.88 (47.75)

S2B16S10P16 P16 1 NPT 10,000 psi (690 bar) 1.88 (47.75)

MAWP: Maximum Allowable Working Pressure

See ball valve option/details section for end connection details, material, and high temperature options.
4.00
(101.6)

0.75
(19.05) 3.38
1.50 (85.7)
(38.10) BODY
THICKNESS
4.00
(101.6)

2.88 2.00
(73.0) (50.8)
(4) 3/8-16 TAP 0.75
.625 DEEP (19.05) 3.38
1.50 (85.7)
(38.10) BODY
THICKNESS

2.88 2.00
(73.0) (50.8)
(4) 3/8-16 TAP
.625 DEEP

1.000 .005 SQUARE

NOTE:
1.75
(44.5)
(25.40 0.12) 1. MAWP (See Table)
2. Maximum Sea Depth
1.25 11,500 FT (3505 meters)
(31.7)
3. Maximum External Pressure
5,000 psi (345 bar)
1.25
(31.8) 1.000 .005 SQUARE
1.75 (25.40 0.12)
(44.5)

0.50
(12.70) 1.25
9.96 (31.7)
(253.0)
2.67
(67.9)

1.25
5.80 (31.8)
(147.2)

0.50
(12.70) SEE END
9.96 CONNECTION
(253.0) OPTIONS
2.67 (both ends)
(67.9)

SEE SEAT
5.80 GLAND HEX
(147.2) 2.88 DIA
(73.0)

SEE END
0.98 CONNECTION
(24.9) OPTIONS
(both ends)

5.19 Dimensions
SEEfor reference only
SEAT
GLAND HEX
(131.8)
2.88 DIA and subject to change.
8.41
(213.7) (73.0)

0.98
Dimensions
(24.9)
for P12 and P16 connections only. Contact facotry for M16 dimensions.

5.19
(131.8)
8.41
(213.7)

12
Ball Valves - 3-Way Subsea Series (3/16 Orifice)
Pressures to 20,000 psi (1379 bar) .187 (4.77mm) Orifice

MAWP @ Minimum Orifice

Connection Room Temperature inches(mm)
SF250CX20 20,000 psi (1379 bar) .109 (2.77)
SF375CX20 20,000 psi (1379 bar) .188 (4.77)
SF562CX20 20,000 psi (1379 bar) .188 (4.77)
F250C 20,000 psi (1379 bar) .094 (2.39)
F375C 20,000 psi (1379 bar) .125 (3.17)
1/4 NPT 15,000 psi (1034 bar) .188 (4.77)
3/8 NPT 15,000 psi (1034 bar) .188 (4.77)
Valve Cv=.50

MAWP: Maximum Allowable Working Pressure

Cv listed is for maximum orifice size of .188 inches only.
Consult factory for Cv of valves with reduced orifice sizes.

PRESSURE TEMPERATURE RATINGS

TEMPERATURE C
(-18) (38) (93) (150) (204) (260)
ONE PIECE BALL STEM 20,000 (1379)
SF & F CONNECTIONS

PACKING GLAND
LOCKING PIECE 15,000 (1034)
NPT CONNECTION
PRESSURE PSIG

PRESSURE BAR
O-RING

THRUST WASHER BELLEVILLE WASHERS

STEM SEAL BELLEVILLE BACKUP 10,000 (690)

LOCKNUT
SEAT GLAND

5,000 (345)

NPT connection rated 400F (204C) maximum.

0
100 200 300 400 500
O-RING
TEMPERATURE F
O-RING O-RING
*pressure ratings are determined by the end connections chosen, see chart.
SEAT
BOTTOM BEARING
NOTE: Maximum side connection inlet pressure 15,000 psi (1034 bar).
SEAT RETAINER Maximum temperature rating is determined by the o-ring material
(see descriptions below).
BOTTOM GLAND
Maximum pressure rating is determined by the end connection
(see table above).
Note: Side inlet pressure not recommended. Bottom inlet pressure only.

NOTE: Ball valves are not recommended for critical gas applications such as Hydrogen, Helium or other small molecular gases.

Ordering Procedure
For complete information on available end connections, see next page. 3-way ball valves are furnished complete with tube or pipe connections.
Standard valve has Buna-N o-rings [250F (121C)] max.

Typical catalog number: S3BD 3 S 20 M9

S3BD 3 S 20 M9 XXX
Valve Ball Material Pressure End Connection Options
Series Orifice (X 1000 psi)
S3B Subsea-3-way Diameter S -316SS M9 - SF562CX20 V - Viton: 400F (204C) max
S3BD Subsea-3-way (For material options (See Chart on EPDM - Ethylene Propylene: 250F (121C) max
diverter 3-3/16
contact factory) next page)
(4.77 mm)

13
End Connection Options
Seat Gland
Catalog End Connection MAWP @ Hex
Number Number Connection Room Temperature Inches(mm)
S3B3S15M4 M4 SF250CX20 15,000 psi (1034 bar) 1 (25.40)
S3BD3S20M4 20,000 psi (1379 bar)
S3B3S15M6 M6 SF375CX20 15,000 psi (1034 bar) 1 (25.40)
S3BD3S20M6 20,000 psi (1379 bar)
S3B3S15M9 M9 SF562CX20 15,000 psi (1034 bar) 1 (25.40)
S3BD3S20M9 20,000 psi (1379 bar)
S3B3S15H4 H4 F250C 15,000 psi (1034 bar) 1 (25.40)
S3BD3S20H4 20,000 psi (1379 bar)
S3B3S15H6 H6 F375C 15,000 psi (1034 bar) 1 (25.40)
S3BD3S20H6 20,000 psi (1379 bar)
S3B3S15P4 P4 1/4 NPT 15,000 psi (1034 bar) 1 (25.40)
S3BD3S15P4
S3B3S15P6 P6 3/8 NPT 15,000 psi (1034 bar) 1 (25.40)
S3BD3S15P6
See ball valve option/detail section for end connection details, material, and high temperature options.
OPEN OPEN OPEN CLOSED OPEN

*3-Way
*3-WayDiverter
DiverterValve
Valve 3-WayBall
3-Way Ball Valve
Valve
90
90Turn
1/4-20 TAP
Turn
.41 DEEP
2.50
(63.50) 180 Turn
180 Turn
(2) PLACES
*The Diverter Valve design permits inlet flow through the bottom port. Outlet
(31.75) flow may be diverted to either valve side port.
1.25

1/4-20 TAP 2.50

.41 DEEP (63.50)
(2) PLACES 1.25 1.00
(31.75) THK
BODY
(25.4)
0.50
(12.7)

1.00
THK
0.25 STEM REF BODY
(6.35) (25.4)
0.50
(12.7)

0.25 STEM REF

(6.35)

0.216 .001
(5.49 .025)

0.50 FLAT LGTH

(12.7)
NOTE:
0.216 .001 1. MAWP (See Table)
(5.49 .025)
.249 .001 2. Maximum Sea Depth
(6.32 .025)
0.50 FLAT LGTH 10,300 FT (3140 meters)
1.28
(12.7)
2.00 3. Maximum External Pressure
(50.8)
(32.5)
0.94 .249 .001
4,500 psi (310 bar)
(23.87) 1.00 (6.32 .025)
(25.4)
0.28 TYP
(7.11)
1.28 2.00
(32.5) (50.8)
0.94
(23.87) .041 TYP 1.00
(10.41) (25.4)
0.28 TYP
4.34 (7.11)
(110.23)
1.50
(38.1) .041 TYP
(10.41)
4.34
(110.23)
2.56
(65.02) 1.50
(38.1)

2.56 SEE END

(65.02) CONNECTION
OPTONS
(3 PLACES)

1.19 HEX TYP SEE END

(30.22) CONNECTION
OPTONS
(3 PLACES)

1.19 HEX TYP

(30.22) Dimensions for reference only
1.00 HEX TYP and subject to change.
(25.4)

2.50
(63.50)

1.00 HEX TYP

4.72
14 (119.89)
(25.4)

2.50
(63.50)

4.72
(119.89)
Ball Valves - 3-Way Subsea Series (3/8 Orifice)
Pressures to 10,000 psi (689 bar) .328 (8.33mm) Orifice

MAWP @ Minimum Orifice

Connection Room Temperature inches(mm)
SW500 10,000 psi (690 bar) .328 (8.33)
SF375CX20 10,000 psi (690 bar) .203 (5.16)
SF562CX20 10,000 psi (690 bar) .312 (7.92)
SF750CX20 10,000 psi (690 bar) .328 (8.33)
1/4 NPT 10,000 psi (690 bar) .328 (8.33)
3/8 NPT 10,000 psi (690 bar) .328 (8.33)
1/2 NPT 10,000 psi (690 bar) .328 (8.33)
Valve Cv=2.1

MAWP: Maximum Allowable Working Pressure

Cv listed is for maximum orifice size of .328 inches only.
Consult factory for Cv of valves with reduced orifice sizes.

PRESSURE TEMPERATURE RATINGS

ONE PIECE BALL STEM TEMPERATURE C
(-18) (38) (93) (150) (204) (260)
PACKING GLAND
15,000 (1034)
O-RING LOCKING PIECE

BELLEVILLE WASHERS
THRUST WASHER
(690)

PRESSURE BAR
PRESSURE PSIG

BELLEVILLE BACKUP 10,000

STEM SEAL SF, SW500 & NPT CONNECTIONS
LOCKNUT SEAT GLAND

5,000 (345)

NPT connections rated 400F (204C) maximum.

0
O-RING 100 200 300 400 500
O-RING O-RING
TEMPERATURE F
SEAT
BOTTOM BEARING
SEAT RETAINER
Maximum temperature rating is determined by the o-ring material
(see descriptions below).
BOTTOM GLAND
Maximum pressure rating is determined by the end connection
(see table above).
Note: Side inlet pressure not recommended. Bottom inlet pressure only.

NOTE: Ball valves are not recommended for critical gas applications such as Hydrogen, Helium or other small molecular gases.

Typical catalog number: S3B 6 S 10 M9

S3B 6 S 10 M9 XXX
Valve Ball Material Pressure End Connection Options
Series Orifice (X 1000 psi)
S3B Subsea-3-way Diameter S -316SS M9 - SF562CX20 V - Viton: 400F (204C) max
S3BD Subsea-3-way (See Chart on EPDM - Ethylene Propylene: 250F (121C) max
diverter 6-3/8 (For material options
next page)
(9.52 mm) contact factory)

15
End Connection Options
Seat Gland
Catalog End Connection MAWP @ Hex
Number Number Connection Room Temperature Inches(mm)
S3B6S10L8 L8 SW500 10,000 psi (690 bar) 1.38 (35.05)
S3BD6S10L8
S3B6S10M6 M6 SF375CX20 10,000 psi (690 bar) 1.38 (35.05)
S3BD6S10M6
S3B6S10M9 M9 SF562CX20 10,000 psi (690 bar) 1.38 (35.05)
S3BD6S10M9
S3B6S10M12 M12 SF750CX20
1.38 10,000 psi (690 bar) 1.38 (35.05)
S3BD6S10M12 (35.1)

S3B6S10P4 P4 1/4 NPT 10,000 psi (690 bar) 1.38 (35.05)

S3BD6S10P4
.66
S3B6S10P6 P6 (16.8) .44 3/8 NPT 1.38
(35.1)
10,000 psi (690 bar) 1.38 (35.05)
(11.2)
S3BD6S10P6
S3B6S10P8 P8 1/2 NPT 10,000 psi (690 bar) 1.38 (35.05)
S3BD6S10P8 .66
MAWP: Maximum Allowable
.44
(11.2) Working Pressure
(16.8)

See ball valve option/details section for end connection details, material, and high temperature options.
OPEN OPEN OPEN CLOSED OPEN

*3-Way Diverter
*3-Way Diverter Valve 5.08
Valve(129.0) 3-WayBall
3-Way BallValve
Valve
90 Turn (25.4)
1.00
180Turn
Turn
90 Turn 180
*The Diverter Valve design permits inlet flow through the bottom port. Outlet flow may be diverted to either valve side port.
5.08 0.69
(129.0) (17.5)
1.00
(25.4) 1.38
(35.1)

0.69
(17.5)
1.38
1/4-20 THREAD 0.281 FLATS REF. (35.1)
(2) PLACES (7.1)
5.74
(145.8)

1/4-20 THREAD 0.281 FLATS REF.

(2) PLACES (7.1)
5.74
1.38 (145.8)
(35.1)

0.281 0.001
NOTE:
0.81
FLAT LENGTH
2 FLATS 180 APART
(7.14 .025)
1. MAWP (See Table)
.66
(16.8) .44
(20.6)
2. Maximum Sea Depth
(11.2)
2.06 0.437 0.001
11,500 FT (3505 meters)
(52.3) (11.1 .025)
B 0.281 0.001
3. Maximum External Pressure
2.00
(50.8) 0.81
FLAT LENGTH
2 FLATS 180 APART
(7.14 .025)
5,000 psi (345 bar)
1.00 (20.6)
(25.4)
0.28 HOLE
DETAIL B 2.06 0.437 0.001(2) PLACES
(52.3) (11.1 .025)(7.1)
2.00 B
0.41 TYP (50.8)
(10.4)
1.00
(25.4)
0.28 HOLE
1.63 (2) PLACES
(41.4) (7.1)

0.41 TYP
(10.4)
5.08
(129.0)
1.00 3.03
(25.4) (77.0) 1.63
(41.4)

SEE END
0.69 CONNECTION
(17.5) OPTIONS
(3 PLACES)
1.38 3.03
(35.1) (77.0)
1.75 HEX
(44.5) SEE SEAT
GLAND HEX SEE END
CONNECTION
OPTIONS
(3 PLACES)

AD 0.281 FLATS REF.

ES (7.1)
1.28
(32.5)
Dimensions
1.75 HEX for reference only
SEE SEAT
5.74 and (44.5)
subject to change.GLAND HEX
(145.8)

16 3.00
(76.2)
1.28
(32.5)

0.281 0.001 3.00

Ball Valves - 3-Way Subsea Series (1/2 Orifice)
Pressures to 10,000 psi (690 bar) .500 (12.7mm) Orifice

MAWP @ Minimum Orifice

MAWP: Maximum Allowable Working Pressure

PRESSURE TEMPERATURE RATINGS

1/2 3 WAY SUBSEA BALL
VALVE STEM TEMPERATURE C
PACKING GLAND (-18) (38) (93) (150) (204) (260)
LOCKING PIECE 15,000 (1034)
O-RING BELLEVILLE WASHERS
THRUST WASHER
BELLEVILLE BACKUP
STEM SEAL
(690)

PRESSURE BAR
PRESSURE PSIG

10,000
LOCKNUT SEAT GLAND
NPT & SF CONNECTIONS

5,000 (345)

NPT connections rated 400F (204C) maximum.

O-RING
0
O-RING O-RING 100 200 300 400 500
SEAT TEMPERATURE F
BOTTOM BEARING
SEAT RETAINER

Maximum temperature rating is determined by the o-ring material

(see descriptions below).
BOTTOM GLAND
Maximum pressure rating is determined by the end connection
(see table above).

Note: Side inlet pressure not recommended. Bottom inlet pressure only.

NOTE: Ball valves are not recommended for critical gas applications such as Hydrogen, Helium or other small molecular gases.

Typical catalog number: S3B 8 S 10 M12

S3B 8 S 10 M12 XXX

Valve Ball Material Pressure End Connection Options
Series Orifice (X 1000 psi)
S3B Subsea-3-way Diameter S -316SS M12 - SF750CX20 V - Viton: 400F (204C) max
S3BD Subsea-3-way (See Chart on EPDM - Ethylene Propylene: 250F (121C) max
8-1/2 (For material options
diverter next page)
(12.7 mm) contact factory)
17
End Connection Options
Seat Gland
Catalog End Connection MAWP @ Hex
Number Number Connection Room Temperature Inches(mm)

S3B8S10M12 M12 SF750CX20 10,000 psi (690 bar) 1.75 (44.5)

S3BD8S10M12
S3B8S10M16 M16 SF1000CX20 10,000 psi (690 bar) 1.75 (44.5)
S3BD8S10M16
S3B8S10P12 P12 3/4 NPT 10,000 psi (690 bar) 1.75 (44.5)
S3BD8S10P12
S3B8S10P16 P16 1 NPT 10,000 psi (690 bar) 1.75 (44.5)
S3BD8S10P16 1.75
MAWP: Maximum Allowable Working Pressure
(44.5)

See ball valve options for end connection details, material, and high temperature options.

.65
OPEN OPEN (16.5) .44 OPEN CLOSED OPEN
(11.2)

*3-Way Diverter Valve 3-WayBall

Ball Valve
Valve
*3-Way 90Diverter 3-Way
Turn Valve 180 Turn
90 Turn 180 Turn
*The Diverter Valve design permits inlet flow through the bottom port. Outlet flow may be diverted to either valve side port.

1/4-20 THREAD
(2) PLACES
3.00
1.50 (76.2)
(38.1)

0.88
(22.4)

1.75
(44.5)

0.438 (11.1) REF

7.77
(197.4)
1.75
(44.5)
0.438 0.001
(11.1 .025)
SQUARE
NOTE:
.65
(16.5) .44
1. MAWP (See Table)
(11.2) 1.188
(30.2) 2. Maximum Sea Depth
FLAT LENGTH
11,500 FT (3505 meters)
2.32
(58.9) 3. Maximum External Pressure
0.686
B
5,000 psi (345 bar)
(17.4)
DETAIL B 3.00
(76.2)
1.50
(38.1) 0.28
(7.1)
0.50 TYP (2) PLACES
(12.7)

1/4-20 THREAD 2.00

(2) PLACES (50.8)
3.00
1.50 (76.2)
(38.1)

3.62
(91.9) SEE END
0.88
(22.4) CONNECTION
OPTIONS
1.75 (3 PLACES)
(44.5)

SEE SEAT
2.25 HEX GLAND HEX
(57.2)

0.438 (11.1) REF

7.77
(197.4)
Dimensions for reference only
1.79
(45.5)
and subject to change.
0.438 0.001
(11.1 .025)
SQUARE

1.188
(30.2) 4.13
FLAT LENGTH (104.9)
18
2.32
(58.9)
B
0.686
(17.4)
3.00
(76.2)
1.50
This page is blank

19
WARNING
FAILURE, IMPROPER SELECTION OR IMPROPER USE OF THE PRODUCTS AND/OR SYSTEMS DESCRIBED HEREIN OR RELATED ITEMS CAN CAUSE DEATH, PERSONAL INJURY
AND PROPERTY DAMAGE.
This document and other information from Parker Hannifin Corporation, its subsidiaries and authorized distributors provide product and/or system options for further investiga-
tion by users having technical expertise. It is important that you analyze all aspects of your application and review the information concerning the product or system in the current
product catalog. Due to the variety of operating conditions and applications for these products or systems, the user, through its own analysis and testing, is solely responsible
for making the final selection of the products and systems and assuring that all performance, safety and warning requirements of the application are met. The products described
herein, including without limitation, product features, specifications, designs, availability and pricing, are subject to change by Parker Hannifin Corporation and its subsidiaries at
any time without notice.

2013 Parker Hannifin Corporation | Autoclave Engineers is a registered trademark of the Parker Hannifin Corporation 02-0108SE January2013

Caution! Do not mix or interchange parts or tubing with those of

other manufacturers. Doing so is unsafe and will void warranty.

Parker Autoclave Engineers ball valves can be supplied with either

pneumatic or electric operators for automated or remote
operation.

Pneumatic and electric operators can be supplied with a variety of

features and options. Operators are sized for each valve series to
provide reliable and trouble free operation. Listed below are the
operator features and available options.

Ball Valve Actuator Features/Options:

Pneumatic Operators
Used for remote and automatic operation
Air-to-open/spring-to-close
Air-to-close/spring-to-open
Air-to-open and close (double acting)
Limit switches or limit switches with visual indicators
available
High temperature option available.
Stainless steel housing for corrosive applications
available.
Optional solenoid valve available
Standard anodized aluminum housing
Optional epoxy coated housing available

Electric Operators Ball Valves - Actuators

Interface with control systems for automated operation
and monitoring
120 & 220 VAC, 50/60 Hz standard
24VDC
Explosion proof available
CE mark available

All general terms and conditions of sale, including limitations of our liability, apply to all products andwww.autoclave.com
services sold. 1
Ball Valves - Actuators
Pneumatic Operated Ball Valves
Add the suffix -AO, -AC or -AOC to the appropriate valve catalog number for a complete valve assembly

VALVE DIMENSION DATA - Inches (mm) MINIMUM REQUIRED

SERIES AIR PRESSURE

A B C D E F G H I J
2B4-AO/AC 6.69 2.56 2.50 1.25 1.00 0.50 0.28 1.14 2.50 1.58 80 psi
(169.92) (65.02) (63.50) (31.75) (25.40) (12.70) (7.11) (28.95) (63.50) (40.13) (5.51 bar)
2B6-AO/AC 9.84 3.94 3.00 1.50 1.50 0.75 0.34 1.87 3.00 2.24 80 psi
(249.93) (100.07) (76.20) (38.10) (25.40) (19.05) (8.63) (47.49) (76.20_) (56.89) (5.51 bar)
2B8-AO/AC 11.65 4.57 3.00 1.50 2.00 1.00 0.53 2.17 3.00 2.48 80 psi

*
3BD3-AO/AC
(259.91) (116.07) (76.20)
6.69 2.56 2.50
(38.10)
1.25
(50.80)
1.00
(25.40) (13.46)
0.50 0.28
(55.11)
1.14
(76.20)
2.50
(62.99)
1.58
(5.51 bar)
80 psi
(169.92) (65.02) (63.50) (31.75) (25.40) (12.70) (7.11) (28.95) (63.50) (40.13) (5.51 bar)
3BD6-AO/AC 9.84 3.94 3.00 1.50 1.50 0.75 0.34 1.87 3.00 2.24 80 psi

*
3BD8-AO/AC
(249.93) (100.07) (76.20)
11.65 4.57 3.00
(38.10)
1.50
(25.40)
2.00
(19.05)
1.00
(8.63)
0.53
(47.49) (76.20_) (56.89)
2.17 3.00 2.48
(5.51 bar)
80 psi
(259.91) (116.07) (76.20) (38.10) (50.80) (25.40) (13.46) (55.11) (76.20) (62.99) (5.51 bar)
2B4-AOC 6.69 2.56 2.50 1.25 1.00 0.50 0.28 1.14 2.50 1.58 80 psi
(169.92) (65.02) (63.50) (31.75) (25.40) (12.70) (7.11) (28.95) (63.50) (40.13) (5.51 bar)
2B6-AOC 7.95 3.07 3.00 1.50 1.50 0.75 0.34 1.40 3.00 1.77 80 psi
(201.93) (77.97) (76.20) (38.10) (38.10) (19.05) (8.63) (35.56) (76.20_) (44.95) (5.51 bar)
2B8-AOC 9.84 3.94 3.00 1.50 2.00 1.00 0.53 1.87 3.00 2.24 80 psi
(249.91) (100.07) (76.20) (38.10) (50.80) (25.40) (13.46) (47.49) (76.20) (56.89) (5.51 bar)
3BD3-AOC 6.69 2.56 2.50 1.25 1.00 0.50 0.28 1.14 2.50 1.58 80 psi
(169.92) (65.02) (63.50) (31.75) (25.40) (12.70) (7.11) (28.95) (63.50) (40.13) (5.51 bar)
3BD6-AOC 7.95 3.07 3.00 1.50 1.50 0.75 0.34 1.40 3.00 1.77 80 psi
(201.93) (77.97) (76.20) (38.10) (25.40) (19.05) (8.63) (35.56) (76.20_) (44.95) (5.51 bar)
3BD8-AOC 9.84 3.94 3.00 1.50 2.00 1.00 0.53 1.87 3.00 2.24 80 psi
(249.91) (100.07) (76.20) (38.10) (50.80) (25.40) (13.46) (47.49) (76.20) (56.89) (5.51 bar)

NOTE: Maximum allowable air pressure is 150 psi (10.34) Actuators operating temperature: 0F to 175F (-17C to 79C)
1/8 NPT female air connector (*= 1/4 NPT) High temperature actuator option available, consult factory
AO: Air to open/spring to close Stainless steel housing actuator models available, consult factory
AC: Air to close/spring to open Actuators available with limit switches and visual indicators.
AOC: Air to open/air to close (double acting) Corrosion resistant anodized aluminum housing.
Epoxy coated housing available.
Solenoids availabe, direct or nipple mount.

"A" "J" "H"
"A"/2

"B"

"G" DIAMETER
(2) Holes
"C" "F"
"D" "E"

NOTE: Operators 90 rotations

standard. 180 options available
upon request.
"I"/2
"I"

2 All general terms and conditions of sale, including limitations of our liability, apply to all products and services sold.
Ball Valves - Actuators
Electric Operated Ball Valves
Add the suffix -EO1, -EO2 or -EO3 to the appropriate valve catalog number for a complete valve assembly

VALVE DIMENSION DATA - Inches (mm) VOLTAGE

SERIES
A B C D E F
2B4-EO1 2.50 1.25 1.00 0.50 0.28 2.50 120 VAC
50/60 Hz
2B4-EO2 (63.50) (31.75) (25.40) (12.70) (7.11) (63.50) 240 VAC
2B6-EO1 3.00 1.50 1.50 0.75 0.34 3.00 120 VAC
50/60 Hz
2B6-EO2 (76.20) (38.10) (38.10) (19.05) (8.63) (76.20) 240 VAC
3BD3-EO1 2.50 1.25 1.00 0.50 0.28 2.50 120 VAC 50/60 Hz
3BD3-EO2 (63.50) (31.75) (25.40) (12.70) (7.11) (63.50) 240 VAC
3BD6-EO1 3.00 1.50 1.50 0.75 0.34 3.00 120 VAC
50/60 Hz
3BD6-EO2 (76.20) (38.10) (38.10) (19.05) (8.63) (76.20) 240 VAC
2B4-EO3 2.50 1.25 1.00 0.50 0.28 2.50 24 VDC
(63.50) (31.75) (25.40) (12.70) (7.11) (63.50)
2B6-EO3 3.00 1.50 1.50 0.75 0.34 3.00 24 VDC
(76.20) (38.10) (38.10) (19.05) (8.63) (76.20)
3BD3-EO3 2.50 1.25 1.00 0.50 0.28 2.50 24 VDC
(63.50) (31.75) (25.40) (12.70) (7.11) (63.50)
3BD6-EO3 3.00 1.50 1.50 0.75 0.34 3.00 24 VDC
(76.20) (38.10) (38.10) (19.05) (8.63) (76.20)

NOTE: EO1: Electric 120 VAC For other voltages consult factory
EO2: Electric 220 VAC Actuator operating temperature: 0F to 160F (-17C to 71C)
EO3: Electric 24 VDC Corrosive resistant Zytel housing
CSA approved for NEMA 4 & 4X Consult factory for epoxy option

* *
*

*
* *

*
"E" DIAMETER
(2) Holes
*
"A"
"D"
"C"
"B"
NOTE:
Operators 90 rotations standard.
180 options available upon request.

* Contact factory for dimensions

"F/2"
"F"

All general terms and conditions of sale, including limitations of our liability, apply to all products and services sold. 3
Ball Valves - Actuators
Electric Operated Ball Valves
Add the suffix -EO1, -EO2 or -EO3 to the appropriate valve catalog number for a complete valve assembly

VALVE VOLTAGE VALVE VOLTAGE NOTE:

SERIES 50/60 HZ SERIES EO1: Electric 120 VAC
EO2: Electric 220 VAC
2B8-EO1 120 VAC 2B8-EO3 24 VDC EO3: Electric 24 VDC
3BD8-EO1 120 VAC Explosion proof
3BD8-EO3 24 VDC
Actuator operating temperature: 0F to 160F (-17C to 71C)
2B8-EO2 220 VAC 2B8-EO3 24 VDC Powder coated aluminum housing
CE marked
3BD8-EO2 220 VAC 3BD8-EO3 24 VDC UL listed & CSA approved for NEMA 4, 4x, 7 & 9
For other voltages consult factory

* * *
*

*
*
*
* *
* *
0.53 (13.46)
3.00 (2) HOLES
(76.20)
1.50 1.00 (25.40)
(38.10) 2.00 (50.80) NOTE:
* Contact factory for dimensions

1.50
3.00 (38.10)
(76.20)

WARNING
FAILURE, IMPROPER SELECTION OR IMPROPER USE OF THE PRODUCTS AND/OR SYSTEMS DESCRIBED HEREIN OR RELATED ITEMS CAN CAUSE DEATH, PERSONAL INJURY
AND PROPERTY DAMAGE.
This document and other information from Parker Hannifin Corporation, its subsidiaries and authorized distributors provide product and/or system options for further investiga-
tion by users having technical expertise. It is important that you analyze all aspects of your application and review the information concerning the product or system in the current
product catalog. Due to the variety of operating conditions and applications for these products or systems, the user, through its own analysis and testing, is solely responsible
for making the final selection of the products and systems and assuring that all performance, safety and warning requirements of the application are met. The products described
herein, including without limitation, product features, specifications, designs, availability and pricing, are subject to change by Parker Hannifin Corporation and its subsidiaries at
any time without notice.

2013 Parker Hannifin Corporation | Autoclave Engineers is a registered trademark of the Parker Hannifin Corporation 02-0109SE January2013

Caution! Do not mix or interchange parts or tubing with those of

other manufacturers. Doing so is unsafe and will void warranty.

PH: 814-860-5700 FAX: 814-860-5811 PH: 353 53 914 1566

4www.autoclave.com All general terms and FAX:
conditions
353 53of914
sale, including limitations of our liability, apply to all products and services sold.
1582 ISO-9001 Certified
Ball Valves
Options / Details
Parker Autoclave Engineers ball valves can be
supplied with a number of options to meet your
requirements. Options consist of different
materials of construction, seal material, high
temperature seals, handle colors, handle lockouts,
limit switches or limit switches with visual indicators
for pneumatic actuators.

Replacement of the old style ball valve with the

new style is also addressed with complete ordering
information.

The following pages provide details on the available

options, as well as tube connection dimensions. For
additional information on these options, or technical
information not found in this or any other section,
consult the factory or local distributor.

Ball Valves - Options / Details

All general terms and conditions of sale, including limitations of our liability, apply to all products andwww.autoclave.com
services sold. 1
Ball Valves - Options / Details

High Temperature Option

Ball valves are available with alternate o-rings for high temperature operation. Standard Viton o-rings are
replaced with Kalrez o-rings to increase the operating temperature to 500F (260C). To specify this
option, add -HT to the catalog number as shown in the ball valve sections.

High temperature pneumatic valve actuators are also available. Consult factory with your application
and for specific information.

Material Options
Standard ball valves are constructed of 316 stainless steel. Other materials are available for specific
applications upon request. NACE (MR0175-2002) approved materials for sour service can be supplied
upon request. Consult factory for later NACE revisions and for the materials available as well as the
temperature and pressure ratings.

Limit Switches or Limit Switches with Visual Indicators

Pneumatic actuators are available with limit switches or limit switches with visual indicators. Consult the
factory for information on these items or questions concerning your applications.

Handle Lockouts
Handle lockouts are available to lockout ball valves in the open or closed position preventing
unauthorized personnel from actuating valves during shutdowns or emergency situations.
Note: To purchase ball valves with lockouts add -L to part number.
Part numbers to purchase lockout separately:
2-Way Ball Valves 3-Way Ball Valves
1/4" 2B4-L 3/16" 3B3-L
3/8" 2B6-L 3/8" 3B6-L
1/2" 2B8-L 1/2" 3B8-L
For 3-way switching ball valves, consult factory.
For 6DB (double block and bleed) valves use two 2B6-L lockouts.

Obsolete Ball Valves

Ball valves complete with connection adapters are available for direct replacement of our older obsolete
ball valve. The ball valve seat glands are designed to permit replacement without having to modify your
existing tubing. To order valves for direct replacement add -OS to the end of the standard ball valve
catalog number.
Note: This applies only to the 1/4 2-way ball valve.

Connection Detail Dimensions

The following are reference dimensions for the tube connections used in the ball valves. For complete
connection information see the Tools, Installation, Operation and Maintenance section in the Parker
Autoclave Engineers Fluid Components complete catalog.

2 All general terms and conditions of sale, including limitations of our liability, apply to all products and services sold.
Tube Connection Dimensions - AE SpeedBite SW *

Tube
Outside Dimensions - Inches (mm) 24

Diameter Connection B
THREAD

inches Type A
DRILL

(mm) A B C D E F G F

C
1/4 SW250 29/64 1/2 -20 0.34 0.44 0.69 0.35 F 0.257 G D

(6.35) (11.50) (12.7) -20 (8.64) (11.20) (17.50) (8.89) F (6.53) E

20
3/8 SW375 37/64 5/8 -18 0.38 0.47 0.75 0.48 W 0.386
(19.50) (14.70) (15.90) -18 (9.65) (11.90) (19.10) (12.20) W (9.80)

1/2 SW500 3/4 13/16 -16 0.41 0.50 0.81 0.60 0.514 *
(12.70) (19.10) (20.60) -16 (10.50) (12.70) (20.60) (15.20) (13.100)

Tube Connection Dimensions - AE SpeedBite W *

Tube
Dimensions - Inches (mm)
24
Outside
Diameter Connection B
THREAD

inches Type A
DRILL

(mm) A B C D E F G F

C
1/8 W125 Q 0.332 3/8 -24 0.22 0.31 0.47 0.19 #30 0.128 G D

(3.18) Q (8.43) (9.53) -24 (5.59) (7.87) (11.90) (4.83) #30 (3.25) E

20
1/4 W250 11/16 3/4 -16 0.38 0.44 0.69 0.35 F 0.257
(6.35) (17.50) (19.10) -16 (9.65) (11.20) (17.50) (8.89) F (6.53)

3/8 W375 11/16 3/4 -16 0.38 0.44 0.69 0.48 W 0.386 *
(9.53) (17.50) (19.10) -16 (9.65) (11.20) (17.50) (12.20) W (9.80)

For prompt service, Parker Autoclave

Note: All dimensions are shown for reference only and should not be considered as actual Engineers stocks select products.
machine dimensions. Consult factory
* For port diameter please see orifice sizes for specific valves and fittings. All threads are manufactured to a class 2A or 2B fit.

Tube Connection Dimensions - AE Medium Pressure SFCX **

Tube
Outside Dimensions - Inches (mm) 60
Diameter Connection
inches Type
(mm) A B C D F B
THREAD
1/4 SF250CX20 25/64 7/16 -20 0.28 0.50 0.19 A
(6.35) (9.92) (11.10) -20 (7.11) (12.70) (4.83) DRILL

F
3/8 SF375CX20 33/64 9/16 -18 0.38 0.62 0.31
(9.53) (13.10) (14.30) -18 (9.65) (15.70) (7.87) C
D
9/16 SF562CX20 3/4 13/16 -16 0.44 0.75 0.50
(14.30) (19.10) (20.60) -16 (11.20) (19.10) (12.70)

3/4 SF750CX20 61/64 3/4 -14z 0.50 0.94 0.62 5

(19.10) (24.20) (19.10) -14z (12.70) (23.90) (15.70)
WEEP
1 SF100CX20 1 -19/64 1-3/8 -12 0.81 1.31 0.88 HOLE
(25.40) (32.90) (34.90) -12 (20.60) (33.30) (22.40)
*
1-1/2 SF1500CX 1-25/32 1-7/8-12 1.00 1.59 1.38 Z = NPS Male Tap
(38.10) (45.24) (47.63)-12 (25.40) (40.49) 34.93)

All general terms and conditions of sale, including limitations of our liability, apply to all products and services sold. 3
Tube Connection Dimensions - AE HighPressure FC **

Tube
Outside Dimensions - Inches (mm) 60

Diameter Connection
inches Type B
THREAD

(mm) A B C D F A
DRILL

F
1/4 F250C 33/64 9/16 -18 0.38 0.44 0.17
(6.35) (13.10) (14.30) -18 (9.65) (11.20) (4.32) 5 C D

3/8 F375C 11/16 3/4 -16 0.53 0.62 0.26

(9.53) (17.50) (19.10) -16 (13.50) (15.70) (6.60)
WEEP
9/16 F562C 1-3/64 1-1/8 -12 0.62 0.75 0.38 HOLE

(14.30) (26.60) (28.60) -12 (15.70) (19.10) (9.65) *

Note: All dimensions are shown for reference only and should not be considered For prompt service, Parker Autoclave stocks select
as actual machine dimensions. products. Consult factory.
* For port diameter please see orifice sizes for specific valves and fittings.
** For male tubing end preparation, please see pages Tools, Installation section in main catalog.
All threads are manufactured to a class 2A or 2B fit.

WARNING
FAILURE, IMPROPER SELECTION OR IMPROPER USE OF THE PRODUCTS AND/OR SYSTEMS DESCRIBED HEREIN OR RELATED ITEMS CAN CAUSE DEATH, PERSONAL INJURY
AND PROPERTY DAMAGE.
This document and other information from Parker Hannifin Corporation, its subsidiaries and authorized distributors provide product and/or system options for further investiga-
tion by users having technical expertise. It is important that you analyze all aspects of your application and review the information concerning the product or system in the current
product catalog. Due to the variety of operating conditions and applications for these products or systems, the user, through its own analysis and testing, is solely responsible
for making the final selection of the products and systems and assuring that all performance, safety and warning requirements of the application are met. The products described
herein, including without limitation, product features, specifications, designs, availability and pricing, are subject to change by Parker Hannifin Corporation and its subsidiaries at
any time without notice.

2013 Parker Hannifin Corporation | Autoclave Engineers is a registered trademark of the Parker Hannifin Corporation 02-0110SE January2013

Caution! Do not mix or interchange parts or tubing with those of

other manufacturers. Doing so is unsafe and will void warranty.

Instrumentation Products Division Parker Hannifin Manufacturing Ltd. Caution! Parker Autoclave Engineers Valves, Fittings and Tools are
Autoclave Engineers Operation Instrumentation Products Division, Europe not designed to work with common commercial instrument tubing
8325 Hessinger Drive Industrial Estate Whitemill and will only work with tubing built to Parker Autoclave Engineers
AES Specifications. Failure to do so will void warranty.
Erie, Pennsylvania 16509-4679 USA Wexford, Republic of Ireland
PH: 814-860-5700 FAX: 814-860-5811 PH: 353 53 914 1566
4www.autoclave.com All general terms andFAX: 353 53 of
conditions 914sale,
1582including limitations of our liability, apply to all products and services sold. ISO-9001 Certified
Relief Valve
Pressures to 75,000 psi ( 5171 bar)
RVP Metal Seat Relief Valves
Series RVP relief valves provide reliable venting of
gases or liquids for set pressures from 3,000 psi
(206.8 bar) minimum to 75,000 psi (5171 bar). The
standard temperature range for all models is -423 to
400 (-252 to 204C). A high temperature option to
750F (399C) is also available.

These precision valves are designed for pressure gas

systems, cryogenic systems, petrochemical applica-
tions and other special systems. Capable of handling
air, gases, steam, vapor and liquids, they are however,
not recommended for steam boiler applications nor
are they ASME code stampable.

RVS Soft Seat Relief Valves

Series RVS relief valves utilize a soft seat design for reliable venting of gases at set pressures
from 1,500 psi (103 bar) to 20,000 psi (1378 bar). The operating temperature range is 32F (0C)
to 400F (204C).

The soft seat design provides bubble tight sealing, repeatable pop-off, and reseat. Additionally,
soft seat valves provide a higher cycle life than metal seat relief valves.

These precision valves are designed for pressure gas systems, where zero leakage is critical. They
are not recommended for liquid nitrogen or liquid carbon dioxide, which produce gas at cryogenic
temperatures upon relief.

Relief valves are designed to open proportionally to increasing pressure. Therefore, they are not
recommended for applications requiring immediate full valve flow at set pressure (such as
decompositions, polymerizations, etc.). Full flow of relief valve is defined at 10% over
set pressure.
Relief Valve

www.autoclave.com
AE Relief Valves Features

Materials: Standard models of Relief Valves are constructed of 316 stainless steel with selected compo-
nents made of anti-galling stainless steel material for optimum economy and ruggedness.

Connections: All models except 30, 60, & 75 RVP series are designed with 9/16 Parker Autoclave Engi-
neers Medium Pressure inlet connections. The 30 & 60 RVP have 3/8 high pressure connection, while the
75 RVP has a 5/16 high pressure connections. The outlet connection on all models is a female 3/4 NPT.
While adapters to other sizes and connection types are available, they must be sized for specific flow re-
quirements. See Adapter section.

Orifice Sizes: Orifice diameters range from .062 (1.57mm) to .312 (7.92mm).

Full Lift for Full Flow: These relief valves are designed to open as a function of increasing system
pressure. Proper spring selection assures repeatability of opening, full lift and flow, and reseat pressures.

Reliability and Long Service Life: Materials engineering and stringent quality control procedures combine
to assure the highest quality, reliability and service life. Each valve is preset and factory sealed to ensure
proper valve operation.

High Set Pressure Capability: Unique seat construction plus over-the-nozzle guiding and proper selection of
materials permits standard set pressures to 75,000 psi. (5171 bar)

Dependable Shut-off: Series RVP relief valves are designed to provide shut-off of liquids and gases under
pressure to commercial tightness standards. Series RVS relief valves are designed to provide bubble tight
shut off of gases.

Fewer Parts, Ease of Maintenance: Engineered to perform with fewer basic components, both RVP and
RVS valves facilitate minimum stocking of spare parts and ease of maintenance. The combined angle seat in
the RVP series eliminates the need for lapping in rework.

Special Requirements: Most models available with CE Mark. SOG option available upon request.

2 All general terms and conditions of sale, including limitations of our liability, apply to all products and services sold.
Relief Valves - RVP Metal Seat Relief Valves

Gas Flow Curves (SCFM of nitrogen) Cap

Consult factory for set pressures higher than 15,000 psi (1034 bar) Adjusting Bolt
15,000
(1034)
15 RVP
Set pressure (psig@100F)

15 RVP set
pressure range Lock Nut

10,000 Gasket
(690)
10 RVP
10 RVP set Spindle
pressure range Spring Washer

5,000 Spring
(344)
5 RVP 5 RVP set
pressure range Spring
Cylinder
0 A
1,000 Lock Nut Mounting Holes
2,000 3,000 4,000
.28 (7.11mm)
(28.32) (56.64) (84.96) (113.28)
SCFM (SCMM) @ 10% overpressure 316SS Plug

Nitronic 60 3/4 NPT

Plug Guide Outlet
All RVP models are designed primarily for thermal 316 SS
2.50
63.50
Valve Body 3.25
expansion or low volume relief applications at high 316SS Seat
82.55

pressures where flow is not critical. Thus, liquid 1.94

49.28
curves for these models are not shown.
316 SS
Seat Gland
Note: Curves on this page are based on capacities of valves
only and do not take tubing into account. 1.19
Inlet 30.22

Caution should be exercised in proper selection of medium Connection 2.00

50.80
pressure tubing based on actual operating conditions. Two
series available: 15,000 (1034.20 bar) and 20,000 (1380 bar).
Figure 1 - RVP Series
Note: See back cover for options and ordering information.

Ordering Table and Specifications

RVP Series - See Figure 1
Connection Size and Type Orfice Pressure Rating psi (bar) @100F (38C)* Dimension Inches (mm)
Catalog*
Inlet Outlet Diameter Minimum Maximum Maximum
Number A
Connection Connection NPT inches (mm) Setting Setting Back Pressure

5RVP9072 SF562CX 3/4 0.312 (7.92) 3,000 (206.84) 5,000 (344.73) 500 (34.47) 9.40 (238.76)
10RVP9072 SF562CX 3/4 0.250 (6.35) 5,000 (344.73) 10,000 (689.46) 500 (34.47) 9.40 (238.76)
15RVP9072 SF562CX 3/4 0.188 (4.78) 10,000 (689.46) 15,000 (1034.20) 500 (34.47) 9.40 (238.76)
20RVP9072 SF562CX 3/4 0.156 (3.96) 15,000 (1034.20) 20,000 (1378.93) 500 (34.47) 9.40 (238.76)
30RVP6072 F375C 3/4 0.125 (3.18) 20,000 (1378.93) 30,000 (2068.39) 500 (34.47) 9.52 (241.81)
45RVP9072 F562C 3/4 0.093 (2.36) 25,000 (1723.66) 45,000 (3102.59) 500 (34.47) 9.52 (241.81)
60RVP6072 F375C 3/4 0.078 (1.98) 30,000 (2068.39) 60,000 (4136.79) 500 (34.47) 9.52 (241.81)
75RVP5072 F312C150 3/4 0.062 (1.57) 37,000 (2551.02) 75,000 (5170.99) 500 (34.47) 9.83 (249.68)

*Maximum pressure rating is based on the lowest rating of any For prompt service, Parker Autoclave Engineers stocks select
component. Actual working pressure may be determined by products. Consult factory.
tubing pressure rating, if lower.

Note: For pressure rating see selection chart.

All general terms and conditions of sale, including limitations of our liability, apply to all products and services sold. 3
Ordering Table and Specifications

Options: Parker Autoclave Engineers can supply various

Cap
options on special order. A high temperature option is Adjusting Bolt
also available for temperatures to 750F (399C) for RVP
models. Low temperature options are available for the soft Lock Nut
seat valves. Gasket

To specify high temperature option: Spring Washer

Spindle

Add suffix HT for 750F (399C) high temperature option Spring

(RVP series only)

Caution: A
Mounting Holes
1. AE relief valves are preset and factory sealed. Lock Nut
.28 (7.11mm)

Warranty is voided if seal is broken by customer.

2. Maximum system operating pressure should not 3/4 NPT
exceed 90% of relief valve set pressure. Arlon
Soft Seat
Outlet
2.50
Operating pressures in excess of this may cause weep Nitronic 60
63.50
3.25
age resulting in damage to the plug Plug Guide 82.55
1.94
and seat. 316 SS 49.28
Valve Body

Ordering Instructions: To permit prompt and correct 316 SS

Seat Gland
responses to your order, we will require the following 1.19
information: quantity, valve catalog number, service require- Inlet 30.22
Connection 2.00
ments (liquid, gas & vapor), set pressure (PSIG - bar), and 50.80

service temperature range.

Figure 2 - RVS Series
RVS Series - See Figure 2
Connection Size and Type Orfice Pressure Rating psi (bar) @100F (38C) Dimension Inches (mm)
Catalog*
Inlet Outlet Diameter Minimum Maximum Maximum
Number A
Connection Connection NPT inches (mm) Setting Setting Back Pressure

5RVS9072 SF562CX 3/4 0.312 (7.92) 1,500 (103.42) 5,000 (344.73) 500 (34.47) 9.40 (238.76)
10RVS9072 SF562CX 3/4 0.25 (6.35) 5,000 (344.73) 10,000 (689.46) 500 (34.47) 9.40 (238.76)
20RVS9072 SF562CX 3/4 0.156 (3.96) 10,000 (689.46) 20,000 (1378.93) 500 (34.47) 9.40 (238.76)
*Maximum pressure rating is based on the lowest rating of any component. Actual working pressure may be determined by tubing pressure rating, if lower. For prompt service, Parker Autoclave
Note: For pressure rating see selection chart. Engineers stocks select products.
Consult factory.

Offer of Sale
The items described in this document are available for sale by Parker Hannifin Corporation, its subsidiaries or its authorized distributors. Any sale contract entered by Parker will be governed by the provisions
stated in Parker's standard terms and conditions of sale (copy available upon request).

2013 Parker Hannifin Corporation | Autoclave Engineers is a registered trademark of the Parker Hannifin Corporation 02-0129SE January2013

Caution! Do not mix or interchange parts or tubing with those of

other manufacturers. Doing so is unsafe and will void warranty.

Instrumentation Products Division Parker Hannifin Manufacturing Ltd. Caution! Parker Autoclave Engineers Valves, Fittings and Tools are
not designed to work with common commercial instrument tubing
Autoclave Engineers Operation Instrumentation Products Division, Europe
and will only work with tubing built to Parker Autoclave Engineers
8325 Hessinger Drive Industrial Estate Whitemill
AES Specifications. Failure to do so will void warranty.
Erie, Pennsylvania 16509-4679 USA Wexford, Republic of Ireland
PH: 814-860-5700 FAX: 814-860-5811 PH: 353 53 914 1566
www.autoclave.com FAX: 353 53 914 1582 ISO-9001 Certified
Custom
Valves, Adapters
& Manifolds
Parker Autoclave Engineers offers special
components designed to meet customer specific
requirements.

The following pages provide a brief outline of our

optional connections and valve styles. Other styles
of connections are available such as flange, SAE, AE
Easy-Union, or metric, upon request.

Manifolds are well suited for particular applications

such as termination of common lines as a distri-
bution source from a large line to several smaller
ones. Parker Autoclave Engineers manifolds are
made to customer specifications and can be rated
up to 100,000 psi (6895 bar). Manifolds can be
supplied with any number and variety of connec-
tions, including our medium and high-pressure con-

Custom Valves, Adapters & Manifolds

nections, NPT, SAE, BSP, clamp-style, and others.

Components are available in non-standard

materials, and can be supplied with special testing,
cleaning or other requirements.

Specialty components such as adapters and

dielectric fittings are available upon request.

Contact your local sales representative for

availability and pricing of custom components.

www.autoclave.com
Custom Valves, Adapters & Manifolds

Parker Autoclave Engineers offers a product line of

non-standard valves and fittings with alternate style
connections.

Military Style Connections

According to military standards
MS16142
MS33649
MS33656
Up to 1 (25.4mm) in size. Tube or
pipe socket
weld

Tube or Pipe Socket Weld Military style

connections

Weld connections up to 1 (25.4mm) in size.

Tube or Pipe Butt Weld
Weld connections up to 1 (25.4mm) in size. Pipe or tube
butt weld

British Standard Pipe Threads

Special Adapters
Parker Autoclave Engineers also offers a line of compo- AE Medium Pressure (Male)
nents that assist in adapting into and out of specialized
connections with Parker Autoclave Engineers medium
pressure products. Along with the adapters shown, Parker
Autoclave Engineers can provide other special adapters to
fill requirements. Contact your local sales representative
for information. KC105 - 2 Piece

KC105 - 1 Piece

Dielectric Fittings
Dielectric couplings isolate components from the effects of
electrical current. Available as male/female coupling rated
to 15,000 psi (1034 bar) with selected connection sizes.
For more information contact local sales or the factory

2 All general terms and conditions of sale, including limitations of our liability, apply to all products and services sold.
Custom Valves, Adapters & Manifolds
Metric, Special Material & Special Configuration Valves, Fittings & Tubing
Parker Autoclave Engineers medium and high pressure
valves and fittings are available in a variety of special ma-
terials and configurations to satisfy most process require-
ments. Please refer to the Valve Options section for types
of materials available and ordering information.
Other custom valves available include large port valves for
ammonia, urea and polyethylene production service, and
Y style straight-thru valves designed to minimize pressure
drop.
Contact your local sales representative to find out more
about these custom products. See the metric section in
this catalog for our complete line of metric valves, fitting
and tubing line.

Manifold Block
Specialty pressure manifolds minimize space requirements
and reduce the installation time necessary to plumb a
pressure system. In addition, by reducing the number of
components used in a system, manifolds also reduce the
number of potential leak joints. Parker Autoclave Engineers
will design and build pressure manifolds to meet specific
installation, layout, and pressure requirements. These mani-
folds are capable of withstanding pressures from vacuum to
100,000 psi (6895 bar), and are available in a variety of ma-
terials and sizes. Among the pressure connections that can
be incorporated are Parker Autoclave Engineers low, medium
and high pressure, NPT, SAE, BSP and others. Transitions in
system line sizes and tubing pressure can be accomplished
through a specialty manifold. These manifolds are appropri-
ate wherever pressure tubing systems are utilized.

Clamp Style Manifolds

Parker Autoclave Engineers will design and build manifolds
with clamp-type metal to metal seats to meet customer
specific applications. Manifolds can be designed with vari-
ous sizes of clamp type closure are rated in accordance
with the maximum rating of the clamp type closure or
other connections, whichever is lower. A wide variation of
connections can be supplied to meet required applications.
These manifolds are used anywhere multiple ports are
needed. They are often used on high pressure liquid
nitrogen pumping systems or other gas/liquid handling
systems requiring high flow capacities with dependable
seal integrity.

Offer of Sale
The items described in this document are available for sale by Parker Hannifin Corporation, its subsidiaries or its authorized distributors. Any sale contract entered by Parker will be governed by the provisions
stated in Parker's standard terms and conditions of sale (copy available upon request).

2013 Parker Hannifin Corporation | Autoclave Engineers is a registered trademark of the Parker Hannifin Corporation 02-0131SE January2013

Caution! Do not mix or interchange parts or tubing with those of

other manufacturers. Doing so is unsafe and will void warranty.

Components such as thermocouples and thermowells are

used for monitoring and controlling temperatures in systems
with operating pressures up to 100,000 psi (6895 bar).

Safety head assemblies are used to protect systems and

pressure vessels from over-pressure conditions. Rupture
discs are available in various pressure ranges and material
options suitable for the application.

Pressure gauges are used to monitor and control pressure.

Pressure gauges are available in two sizes, 4-1/2 and 6
(114.3 mm and 152.4 mm), and ranges from 0 to 80,000 psi
(0 to 5116 bar). Optional electrical contact faces for pressure
control are used to set high and low limits. Gauges are stan-
dard panel mount or can be flush mounted with an optional
flush mount kit.

Gauge/instrument snubbers provide superior protection

without compromising instrument accuracy or reaction time.
Available with male and female connections in 1/4" and 3/8"
sizes.

Accessories are also available as specials or non-standard

items. Contact your local sales representative for more
information.

Accessories

www.autoclave.com
Accessories - Pencil-type Thermocouples
Pressures to 15,000 psi (1034 bar)

Thermocouples provide reliable temperature measurement

within a system.

The design permits installation of the element in direct contact

with the fluid stream, thereby providing reliable temperature
measurement. The quick-connector affords system flexibility.
The thermocouple tip has a grounded-type junction.

Materials
Precision-molded plastic connectors have heavy duty, spring-
loaded jack inserts for positive contact. The sheath is type 316
stainless steel with 316 SS ferrule and gland. We offer a choice
of iron constantan (J) or chromel-alumel (K) type elements
(please specify when ordering). Basic assembly includes 1/8
Parker Autoclave Engineers Speedbite connection with adapt-
ers for other connection sizes.

Pressure/Temperature Ratings
Ratings to 15,000 psi (1034 bar) maximum working pressure.
Temperature rating based on connection style. Low pressure
Speedbite connection not recommended below 0F (-17.8C)
or above 650F (343C)

Ordering Information
Catalog order numbers in the table refer to the complete as-
sembly. Add suffixJ for iron constantan element or K for
chromel-alumel. To order a basic thermocouple with plug/jack
assembly and connection (without through or angle block),
change last digit in order number to 0 and specify sheath
length if different from standard 3.62 (91.94 mm) length.

Ordering examples: TP4400K 6 (152.4 mm) denotes basic

thermocouple to fit into a 1/4 Parker Autoclave Engineers
SpeedBite connection with chromel-alumel element and 6
(152.4 mm) sheath. TP 4401K denotes the above unit com-
plete with through-type block and standard 3.62 (91.94 mm)
sheath.

Thermocouple Specification Table

Calibration Type Type of Thermocouple Temperature Range Comments

Iron (+) 32 - 1400F Reducing atmoshphere recommended. Iron leg

J Constantan (-) (0 - 760C) subject to oxidation to elevated temperatures-
use larger gauge to compensate.
Chromel (+) -328 - 2300F Well suited for oxidizing atmosphere. Most
K
Alumel (-) (-200 - 1260) commonly used calibration type.

2 All general terms and conditions of sale, including limitations of our liability, apply to all products and services sold.
Accessories - Pencil-type Thermocouples
Fits Tubing Dimensions - inches (mm)
Catalog Connection Size Block Fitting
Number Type Inches (mm) A B C D E H Thickness Pattern

Through-Type
TP2201 W125 1/8 1.38 0.69 0.31 3.62 1.00 7.18 0.50
(3.18) (35.05) (17.53) (7.87) (91.95) (25.40) (182.37) (12.70)
TP4401 SW250 1/4 1.75 0.88 0.44 3.62 1.19 7.25 0.62
(6.35) (44.45) (22.35) (11.18) (91.95) (30.23) (184.15) (15.75) See
TP6601 SW375 3/8 2.00 1.00 0.53 3.62 1.38 7.31 0.75 Figure 1
(9.52) (50.80) (25.40) (13.46) (91.95) (35.05) (185.67) (19.05)
TP8801 SW500 1/2 2.50 1.25 0.53 3.62 1.75 7.44 1.00
(12.70) (63.50) (31.75) (13.46) (91.95) (44.45) (188.98) (25.40)

Angle-Type
TP2202 W125 1/8 1.00 0.75 0.31 3.62 1.38 7.62 0.50
(3.18) (25.40) (19.05) (7.87) (91.95) (35.05) (193.55) (12.70)
TP4402 SW250 1/4 1.19 0.88 0.44 3.62 1.75 7.81 0.62
(6.35) (30.23) (22.35) (11.18) (91.95) (44.45) (198.37) (15.75) See
TP6602 SW375 3/8 1.38 1.00 0.53 3.62 2.00 7.94 0.75 Figure 2
(9.52) (35.05) (25.40) (13.46) (91.95) (50.80) (201.68) (19.05)
TP8802 SW500 1/2 1.75 1.25 0.53 3.62 2.50 8.19 1.00
(12.70) (44.45) (31.75) (13.46) (91.95) (63.50) (208.03) (25.40)

Note: All thermocouples are furnished complete with connection components unless otherwise All dimensions for reference only and subject to change.
specified. For prompt service, Parker Autoclave Engineers stocks select products. Consult your
local representative.
Maximum pressure rating is based on the lowest rating of any component.
Actual working pressure may be determined by tubing pressure rating, if lower.

Figure 1 Figure 2

C
C
H D H

D
E E

B B
A A

Through-Type Angle-Type

Note: Tee or elbow is included in standard catalog number.

All general terms and conditions of sale, including limitations of our liability, apply to all products and services sold. 3
Accessories - Sheath-type Thermocouples
Pressures to 60,000 psi (4137 bar)

Thermocouples provide reliable temperature measurement

within a fluid system.

Similar to low pressure thermocouples, this design also

permits direct temperature monitoring at any point in a fluid
system. The sheath type thermocouple features grounded junc-
tion and rapid response - 100 milliseconds or less at 63.3% of
a step charge.

Temperature Rating
Rating to 2,000F (1093C) at tip of thermocouple. (Refer to
adjacent Pressure/Temperature chart for elevated tempera-
tures.) Minimum operating temperature 0F (-17.8C)

Sheath Length
Differs for each size connection for optimum tip contact with
fluid stream.
Standard collar and gland are cold worked 316 SS for use up
Materials to 1200F (649C). When cold worked 316 SS collar and gland
Bodies are 15-5PH stainless steel. 316 sheath brazed into body are used, the physical properties are permanently altered after
with gold-nickel alloy brazing material. An aluminum terminal use above 800F (427C).
housing is threaded into the body for ready access to termi-
nals. An o-ring seal provides moisture protection. CAUTION: While testing has shown O-rings to provide satis-
factory service life, both cyclic and shelf life may vary widely
Ordering Information with differing service conditions, properties of reactants,
To order thermocouples for use in standard Parker Autoclave pressure and temperature cycling, and age of the O-ring.
Engineers tees or crosses, use order numbers listed in table FREQUENT INSPECTION SHOULD BE MADE to detect any
(fittings not included as standard). For custom length sheaths, deterioration, and O-rings replaced as required.
to extend through a vessel wall or cover, calculate sheath
length as follows: CAUTION: See appropriate pressure section in reference to
proper selection of tubing.
1. Add vessel wall or cover thickness to the distance the
sheath will extend into vessel.
2. When using a basic 1/4 Autoclave connection, subtract
dimension M for proper sheath length to order.
3. For all other connection sizes, add dimension N to
measurement obtained in step 1.
4. Order a custom length sheath by adding desired length in
inches as suffix to order number.

4 All general terms and conditions of sale, including limitations of our liability, apply to all products and services sold.
Accessories - Sheath-type Thermocouples
Fits Tubing Dimensions - inches (mm)
Catalog Connection Size Element Fitting
Number Type Inches (mm) Type L M N H Pattern

Series TS 20,000 psi (1379 bar)

TSJ4 SF250CX 1/4 iron constantan 0.28 0.50 5.78
See Figure 1
TSK4 (3.18) chromel-alumel (7.11) (12.70) (146.81)
TSJ6 SF375CX 3/8 iron constantan 1.19 0.19 6.67
TSK6 (9.52) chromel-alumel (30.23) (4.83) (166.88)
TSJ9 SF562CX 9/16 iron constantan 1.19 0.13 6.50
TSK9 (14.28) chromel-alumel (30.23) (3.30) (165.10) See
TSJ12 SF750CX 3/4 iron constantan 2.00 0.50 6.88 Figure 2
TSK12 (19.05) chromel-alumel (50.80) (12.70) (174.75)
TSJ16 SF1000CX 1 iron constantan 2.62 0.57 6.94
TSK16 (25.4) chromel-alumel (66.55) (14.48) (176.28)
TSJ24 SF1500CX 1-1/2 iron constantan 3.25 .688 7.062
(See note below)
TSK24 (38.10) chromel-alumel (82.55) (17.48) (179.38)

Series TC 60,000 psi (4137 bar)

TCJ4 F250C 1/4 iron constantan 0.38 0.50 5.88
See Figure 1
TCK4 (3.18) chromel-alumel (9.65) (12.70) (149.35)
TCJ6 F375C 3/8 iron constantan 1.38 0.32 6.69
TCK6 (9.52) chromel-alumel (35.05) (8.13) (169.93) See
TCJ9 F562C 9/16 iron constantan 1.62 0.25 6.62 Figure 2
TCK9 (14.28) chromel-alumel (41.15) (6.35) (168.15)

Note: All thermocouples are furnished complete with connection components unless All dimensions for reference only and subject to change.
otherwise specified. For prompt service, Parker Autoclave Engineers stocks select
Basic assembly includes 1/4 connection with adapters for other O.D. tube sizes. products. Consult your local representative.
TSJ24 and TSK24 do not extend past the wall of the bore.
Maximum pressure rating is based on the lowest rating of any component.
Actual working pressure may be determined by tubing pressure rating, if lower.

Figure 1 Figure 2

1.25"
(31.75)

TOP FACE
OF COVER
SHEATH TEE OR
6.375" DIAMETER
CROSS
(161.93) 0.062"
(1.57mm)

N
H
L SHEATH
TOP FACE DIAMETER
OF COVER
3.75" 0.062"
TEE OR
(95.25) (1.57mm)
CROSS

Note: The tee shown in both figures are for reference only. Tee is not included.

All general terms and conditions of sale, including limitations of our liability, apply to all products and services sold. 5
Accessories - Thermowells
Pressures to 20,000 psi (1379 bar)

Thermowells are used to provide isolation between a Care must be taken in determining the material used for
temperature sensor and the environment, such as liquid or the thermowell as well as other factors. Parker Autoclave
gas. Thermowells protect the sensor from pressure, corrosion, Engineers offers design assistance that includes pressure,
abrasion or vibration caused by the process medium. temperature and vibration effect of the fluids. This vibration
Thermowells allow the temperature sensor to be removed can cause well stem failure.
and replaced without compromising either the ambient region Standard and special thermowell materials available:
or the process. 316 Stainless Steel
Hastelloy
Parker Autoclave Engineers manufactures thermowells from Inconel
solid bar stock to accommodate applications in the petro- Connection gland included
chemical, chemical, refining, power and other process indus- To order Parker Autoclave Engineers thermowell assemblies,
tries for many years. please refer to our order guide to assist in determining your
needs. Contact your local representative or the factory for
Parker Autoclave Engineers manufactures 316SS thermowells technical assistance and application suggestions.
capable of connecting to a 1" (SF1000CX) Parker Autoclave
Engineers female medium pressure connection.

-10 90

TEMPERATURE SENSOR

THERMOWELL

HEADER COUPLING

PIPE

Typical Thermowell Assembly

6 All general terms and conditions of sale, including limitations of our liability, apply to all products and services sold.
Ordering Information

Catalog Number Dimesion "A" in (mm) Pressure Rating PSI (bar)

TW02.75 2.75 (70.68) 20,000 (1379)
TW03.12 3.12 (79.25) 20,000 (1379)
TW03.86 3.86 (98.04) 20,000 (1379)
TW04.25 4.25 (107.95) 20,000 (1379)
TW04.50 4.50 (114.30) 20,000 (1379)
TW05.50 5.50 (139.70) 20,000 (1379)
TW05.75 5.75 (146.05) 20,000 (1379)
TW06.25 6.25 (158.75) 20,000 (1379)
TW07.00 7.00 (177.80) 20,000 (1379)
TW07.50 7.50 (190.50) 20,000 (1379)
TW010.00 10.00 (254.00) 20,000 (1379)
TW012.00 12.00 (304.80) 20,000 (1379)

+015 +.381
A -.000 -.000mm

A -250 +015 6.35 +.381

-.000 -.000mm
GLAND NUT
.26 (6.60mm)
.53 (13.46mm)

2.350
(59.69)
DIA
DIA

1/2 NPT
1.44
See Note

Cover Thickness

Note: Thermowells fit Autoclave's 1" medium pressure connection. (SF1000-CX). 1" connection insertion length is 1.44" (36.76).

All general terms and conditions of sale, including limitations of our liability, apply to all products and services sold. 7
Accessories - Universal Safety Heads
Pressures to 110,000 psi (7584 bar)

Safety Heads/Rupture Discs - Safety Heads and Rupture Discs

offer an economical and dependable relief port to guard against
system over-pressure.

Parker Autoclave Engineers offers universal safety heads in

three series compatible in orifice size and maximum pressure
rating with Parker Autoclave Low Pressure, Medium Pressure
and High Pressure valves, fittings and tubing.

Parker Autoclave Engineers Low Pressure Series SS: Parker

Autoclave SpeedBite Ermeto-type tube connection, maximum
rupture pressures to 15,000 psi (1034 bar).

Parker Autoclave Engineers Medium Pressure Series CSX:

Parker Autoclave Medium-Pressure coned-and-threaded tube
connection, maximum rupture pressures to 20,000 psi (1379 Materials and Features
bar). Non-rotating double-cone plug design avoids galling and
scoring of safety head or connection during installation.
Parker Autoclave Engineers High Pressure Series CS: Parker Reduces likelihood of leakage.
Autoclave High Pressure coned-and-threaded tube connection,
maximum rupture pressure to 110,000 psi (7584 bar). Interchangeable hold-down rings permit use of several dif-
ferent sizes and types of rupture discs in a single safety head.
The 3/16F style features a 3/16 blow-out diameter and a flat Accommodates discs with rupture pressures as low as 90 psi
seat which can be ordered in pressure range from (6.2 bar) and ranging to 60,000 psi (4137 bar) and above.
200 to 27,000 psi (13.8 to 1862 bar).
Installs in any standard Parker Autoclave Engineers coupling,
The 1/4A style features a 1/4 blow-out diameter and an elbow, cross or tee.
angular seat which can be ordered in pressures from
900 to 60,000 psi (62 to 4137 bar). Cold-worked Type 316 SS body hold down gland and plug,
all series.
The 1/4F style features a 1/4 blow-out diameter and a flat seat
which is used for pressure above 60,000 psi (4137 bar). Hold down rings are corrossion resistant stainless steel.

The 1/2F style features a 1/2 blow-out diameter and a flat seat Consult Local Sales Representative for safety head assemblies rated above
which can be ordered in pressures from 500 to 10,000 psi 60,000 psi (4137 bar).
(35 to 690 bar).

ASME Safety Head - Parker Autoclave Engineers now has

an ASME Section VIII Div. 3 safety head assembly rated to
115,000 psi (7929 bar).
Contact the factory or your local sales representative for
details and ordering information.

8 All general terms and conditions of sale, including limitations of our liability, apply to all products and services sold.
Ordering Information Hold-down nut torque requirements vs. rupture disc
To order an Parker Autoclave Engineers Universal Safety Head, burst pressure rating @ RT
use the catalog order number from table. ADD THE SIZE OF

Burst Pressure psi (bar)

60,000
THE RUPTURE DISC YOU WANT AS A SUFFIX TO THE CATA- (4137)
LOG NUMBER; SUCH AS CS6600-1/4A. Then order desired 45,000 Note: Inconel disc only
rupture discs from rupture disc section. (This is important (3103)

@ RT
1/4 angle disc
since the disc size determines which hold-down ring will be 30,000
furnished with the safety head.) Note: Plug is included. (2068)
3/16 flat disc
15,000
Hold-down nut torque values (1034)
1/2 flat disc
Torque@ Torque@
Minimum Maximum Rupture Hold-down 0 30 60 90 120 150
Pressure Pressure Disc Ring (40.6) (81.3) (122.4) (162.7) (203.3)
Ft. lb. psi Ft. lb. psi inches Part Number
(N.m) (bar) (N.m) (bar) Torque ft.lb (N.m)
20 5,000 90 26,500 3/16 Flat= 112A-0439
(27.1) (345) (122.0) (1827)
40 4,000 90 10,000 1/2 Flat 1050-7434
(54.2) (276) (122.0) (690)
20 4,000 140 60,000 1/4 Angle 108A-0439
(27.1) (276) (189.8) (4137)

3/16 flat seat disc cannot be used with safety head assemblies SS6600, SS8600, 40CS9600 and
CSX9600. Torque values for intermediate pressures may be linearily interpolated. Use minimum torque
value for pressures lower than those shown.

1/2 Flat Disc illustrated in safety head

Rupture
Hold-down Hold-down Disc Connection
Nut Ring
3/8" NPT Plug

Outlet C Inlet

E
D Body

Inlet Inlet

3/16 Flat rupture disc 1/4 Angle rupture disc

Catalog Hold-down Fitting Rupture Disc Size Dimensions

Number Body Plug Gland Fits Pressure Body Plug Body inches (mm) inches (mm)
Without Part Part Part Connection Rating Torque Orifice Orifice 3/16F 1/4A 1/2F
Disc Number Number Number Type psi (bar) Ft.lb. (N.m) inches (mm) inches (mm) Port E* Port E* Port E* C D

Low-Pressure
SS2600 2010- 101A- 3/16 W125 15,000 15 0.094 0.125 0.188 0.25 0.50 1.00 2.13
7035 0434 & (1034.2) (20.3) (2.39) (3.15) (4.78) (6.35) (12.7) (25.4) (53.96)
1/2
SS4600 2020- 102A- Flat SW250 15,000 15 0.125 0.250 0.188 0.25 0.50 1.00 2.13
7035 0434 1040-7434 (1034.2) (20.3) (3.18) (6.35) (4.78) (6.35) (12.7) (25.4) (53.96)
SS6600 2030- 103A- SW375 15,000 15 0.250 0.375 NA 0.25 0.50 1.00 2.13
7035 0434 1/4 (1034.2) (20.3) (6.35) (9.53) (6.35) (12.7) (25.4) (53.96)
Angle
SS8600 2040- 104A- 1030-0241 SW500 10,000 20 0.375 0.375 NA 0.25 0.50 1.00 2.13
7035 0434 (690.0) (22.1) (9.53) (9.53) (6.35) (12.7) (25.4) (53.96)

Maximum pressure rating is based on the lowest rating of any component.

Port E* - Minimum disc blow-out diameter of hold down ring Actual working pressure may be determined by tubing pressure rating, if lower.

Note: Interchangeable hold-down rings permit use of several different sizes and types of rupture All dimensions for reference only and subject to change.
disc in a single safety head. For prompt service, Parker Autoclave Engineers stocks select products.
Consult your local representative.

All general terms and conditions of sale, including limitations of our liability, apply to all products and services sold. 9
1/2 Flat Disc illustrated in safety head

Rupture
Hold-down Hold-down Disc Connection
Nut Ring
3/8" NPT Plug

Outlet C Inlet

E
D Body

Inlet Inlet

3/16 Flat rupture disc 1/4 Angle rupture disc

Catalog Hold-down Fitting Rupture Disc Size Dimensions

Medium-Pressure
CSX4600 101A- 2010- 3/16 SF250CX 20,000 15 0.094 0.141 0.188 0.25 0.50 1.00 2.19
&
1731 7823 1/2
(1378.9) (20.3) (2.39) (3.58) (4.78) (6.35) (12.7) (25.4) (55.63)
CSX6600 102A- 2010- Flat SF375CX 20,000 20 0.171 0.250 0.188 0.25 0.50 1.00 2.19
1040-7434
1731 7844 (1378.9) (27.1) (4.34) (6.35) (4.78) (6.35) (12.7) (25.4) (55.63)
1/4
CSX9600 101A- 102A- Angle SF562CX 20,000 30 0.312 0.375 NA 0.25 0.50 1.00 2.19
0438 0438 1030-0241 (1378.9) (40.6) (7.92) (9.53) (6.35) (12.7) (25.4) (55.63)

High-Pressure
CS4600 2010- 1030- 3/16 F250C 60,000 20 0.082 0.125 0.188 0.25 0.50 1.00 2.25
7036 4877 & (4136.8) (2.8) (2.08) (3.18) (4.78) (6.35) (12.7) (25.4) (57.15)
1/2
CS6600 2020- 1030- Flat F375C 60,000 40 0.125 0.219 0.188 0.25 0.50 1.00 2.25
7036 6096 1040-7434 (4136.8) (5.5) (3.18) (5.56) (4.78) (6.35) (12.7) (25.4) (57.15)
CS9600 2030- 1030- F562C 60,000 80 0.188 0.281 0.188 0.25 0.50 1.19 2.25
7036 6097 (4136.8) (11.1) (4.78) (7.13) (4.78) (6.35) (12.7) (30.23) (57.15)
1/4
40CS9600 2030- 101C- Angle F562C40 40,000 80 0.250 0.281 NA 0.25 0.50 1.19 2.25
7036 7192 1030-0241 (2757.9) (11.1 (6.35) (7.13) (6.35) (12.7) (30.23) (57.15)

Port E* - Minimum disc blow-out diameter of hold down ring Maximum pressure rating is based on the lowest rating of any component.
Actual working pressure may be determined by tubing pressure rating, if lower.
Note: Interchangeable hold-down rings permit use of several different sizes and types of rupture
disc in a single safety head. All dimensions for reference only and subject to change.
For prompt service, Parker Autoclave Engineers stocks select products. Consult your local
representative.

10 All general terms and conditions of sale, including limitations of our liability, apply to all products and services sold.
Accessories - Prebulged Rupture Discs
Ordering Information
Specify quantity, disc size, type, material and temperature.
Indicate desired rupture rating which should be at least
110% of operating pressure. The burst rating tolerance
is +/- 5% of the furnished tag rating. Discs are rated at
72F (22C). 3/16 F Ref. O.D.
.375" (9.53 mm) 1/4A Ref. O.D.
0% optional manufacturing range is available upon request. 1/2 F Ref. O.D.
.62" (15.7 mm)

0% option provides the burst pressure requested with a .68" (17.3 mm)

+/-5% burst tolerance.

Minimum order of 6 discs required for materials other than
Inconel.
3/16" Dia.
See next page for standard part numbers. (4.76 mm) 1/4" Dia.
1/2" Dia. (6.35 mm)
(12.7 mm)
Note: Inconel disc normally available from stock.
Flat Seat Rupture Disc 30 Angular Seat Rupture Disc

Disc Disc Size Rupture Pressures Standard Maximum Temperature

Material Seat Type Available Range 5% Rating
Inches psi (bar) F (C)
3/16 flat 220 to 1,750 (15.2 to 120.7) 250 (121)
Aluminum 1/4 angle 160 to 2,000 (11.0 to 137.9) 250 (121)
1/2 flat 90 to 1,000 (6.2 to 68.9) 250 (121)

3/16 flat 500 to 4,500 (34.5 to 310.3) 250 (121)

Silver 1/4 angle 360 to 6,000 (24.8 to 413.7) 250 (121)
1/2 flat 190 to 1,700 (13.1 to 117.2) 250 (121)

3/16 flat 4,400 to 65,000 (303.4 to 4481.5) 1,000 (538)

Hastelloy C 1/4 angle 3,300 to 70,000 (227.5 to 4826.3) 1,000 (538)
1/2 flat 1,000 to 11,500 (68.9 to 792.9) 1,000 (538)

3/16 flat 770 to 20,000 (53.1 to 1378.9) 750 (399)

Nickel 1/4 angle 550 to 35,000 (37.9 to 2413.1) 750 (399)
1/2 flat 300 to 7,500 (20.7 to 517.1) 750 (399)

3/16 flat 2,650 to 20,000 (182.7 to 1378.9) 800 (427)

Monel 1/4 angle 2,000 to 40,000 (137.9 to 2757.9) 800 (427)
1/2 flat 1,000 to 7,500 (68.5 to 517.1) 800 (427)

3/16 flat 1,250 to 20,000 (86.2 to 1378.9) 900 (482)

Inconel 600 (Standard) 1/4 angle 900 to 75,000 (62.1 to 5171.0) 900 (482)
1/2 flat 500 to 10,000 (34.5 to 690.0) 900 (482)

3/16 flat 1,750 to 20,000 (120.7 to 1378.9) 900 (482)

Type 316 Stainless Steel 1/4 angle 1,250 to 60,000 (86.2 to 4136.8) 900 (482)
1/2 flat 700 to 10,000 (48.3 to 690.0) 900 (482)

PTFE coating available on one or both sides to increase minimum rupture rating. All dimensions for reference only and subject to change.
For prompt service, Parker Autoclave Engineers stocks select products.
CAUTION: High pressure-to-rupture ratios, severe pressure or temperature cycling, corrosion and Consult your local representative.
metal fatigue affect disc life and rupture pressure. Frequent disc replacement may be desirable to avoid
premature rupture. Rupture disc manufacturers recommended a 140 to 170 percent margin on disc
ratings for extended disc life.

All general terms and conditions of sale, including limitations of our liability, apply to all products and services sold. 11
Rupture Disc Stock Part List - 3/16 Flat Disc

Part Pressure Pressure
Number Description Material Range Range
(psi) (bar)

P-7003 3/16F DISC Inconel 1940-2120 134-146

P-7674 3/16F DISC Inconel 2231-2438 154-168
P-7005 3/16F DISC Inconel 2910-3180 201-219
P-7007 3/16F DISC Inconel 3201-3498 221-241
P-7009 3/16F DISC Inconel 3880-4240 268-292
P-7011 3/16F DISC Inconel 4365-4700 301-324
P-7013 3/16F DISC Inconel 4850-5300 334-365
P-7015 3/16F DISC Inconel 5141-5618 355-387
P-7017 3/16F DISC Inconel 5335-5830 368-402
P-7018 3/16F DISC Inconel 5626-6148 388-424
P-7019 3/16F DISC Inconel 5723-6254 395-431
P-7020 3/16F DISC Inconel 5820-6360 401-439
P-7021 3/16F DISC Inconel 6014-6572 415-453
P-7022 3/16F DISC Inconel 6111-6678 421-460
P-7024 3/16F DISC Inconel 6305-6890 435-475
P-7026 3/16F DISC Inconel 6790-7420 468-512
P-7028 3/16F DISC Inconel 7275-7950 502-548
P-7030 3/16F DISC Inconel 7760-8480 535-585
P-7032 3/16F DISC Inconel 8245-9010 568-621
P-7034 3/16F DISC Inconel 8730-9540 602-658
P-7040 3/16F DISC Inconel 10185-11130 702-767
P-7044 3/16F DISC Inconel 11155-12190 769-840
P-7046 3/16F DISC Inconel 11640-12720 803-877
P-7048 3/16F DISC Inconel 12125-13250 836-914
P-7050 3/16F DISC Inconel 12610-13780 869-950
P-7052 3/16F DISC Inconel 13095-14310 903-987
P-7054 3/16F DISC Inconel 13580-14840 936-1023
P-7056 3/16F DISC Inconel 14065-15370 970-1060
P-7058 3/16F DISC Inconel 14550-15900 1003-1096
P-7060 3/16F DISC Inconel 15035-16430 1037-1133
P-7062 3/16F DISC Inconel 15520-16960 1070-1169
P-7064 3/16F DISC Inconel 16005-17490 1103-1206
P-7068 3/16F DISC Inconel 16975-18550 1170-1279
P-7072 3/16F DISC Inconel 17945-19610 1237-1352
P-7074 3/16F DISC Inconel 18430-20140 1271-1389
P-7080 3/16F DISC Inconel 19885-21730 1371-1498
P-7082 3/16F DISC Inconel 20370-22260 1404-1535
P-7084 3/16F DISC Inconel 20885-22790 1440-1571
P-7086 3/16F DISC Inconel 21340-23320 1471-1608
P-7088 3/16F DISC Inconel 21825-23850 1505-1644
P-7094 3/16F DISC Inconel 23280-25440 1605-1754
P-7096 3/16F DISC Inconel 24250-26500 1672-1827
P-7098 3/16F DISC Inconel 24735-27030 1705-1864

12 All general terms and conditions of sale, including limitations of our liability, apply to all products and services sold.
Rupture Disc Stock Part List - 1/4 Angle Disc

Part Pressure Pressure

Number Description Material Range Range
(psi) (bar)

P-7301 1/4A DISC Inconel 970-1060 67-73

P-7303 1/4A DISC Inconel 1164-1272 80-88
P-7305 1/4A DISC Inconel 1445-1590 100-110
P-7307 1/4A DISC Inconel 1697-1855 117-128
P-7309 1/4A DISC Inconel 1940-2120 134-146
P-7311 1/4A DISC Inconel 2425-2650 167-183
P-7313 1/4A DISC Inconel 2910-3180 201-219
P-7315 1/4A DISC Inconel 3395-3710 234-256
P-7317 1/4A DISC Inconel 3880-4240 268-292
P-7319 1/4A DISC Inconel 4365-4770 301-329
P-7321 1/4A DISC Inconel 4850-5300 334-365
P-7323 1/4A DISC Inconel 5335-5830 368-402
P-7325 1/4A DISC Inconel 5820-6360 401-438
P-7327 1/4A DISC Inconel 6305-6890 435-475
P-7329 1/4A DISC Inconel 6790-7420 468-512
P-7331 1/4A DISC Inconel 7275-7950 502-548
P-7333 1/4A DISC Inconel 7760-8480 535-585
P-7335 1/4A DISC Inconel 8245-9010 568-621
P-7337 1/4A DISC Inconel 8730-9540 602-658
P-7339 1/4A DISC Inconel 9215-10070 635-694
P-7341 1/4A DISC Inconel 9700-10600 669-731
P-7343 1/4A DISC Inconel 10185-11130 702-767
P-7345 1/4A DISC Inconel 10670-11660 736-804
P-7347 1/4A DISC Inconel 11155-12190 769-841
P-7349 1/4A DISC Inconel 11640-12720 803-877
P-7351 1/4A DISC Inconel 12125-13250 836-914
P-7353 1/4A DISC Inconel 12610-13780 869-950
P-7355 1/4A DISC Inconel 13095-14310 903-987
P-7357 1/4A DISC Inconel 13580-14840 936-1023
P-7361 1/4A DISC Inconel 14550-15900 1003-1096
P-7363 1/4A DISC Inconel 15035-16430 1037-1133
P-7365 1/4A DISC Inconel 15520-16960 1070-1169
P-7367 1/4A DISC Inconel 16005-17490 1103-1206
P-7369 1/4A DISC Inconel 16490-18020 1137-1242
P-7371 1/4A DISC Inconel 16975-18550 1170-1279
P-7373 1/4A DISC Inconel 17460-19080 1204-1315
P-7375 1/4A DISC Inconel 17945-19610 1237-1352
P-7377 1/4A DISC Inconel 18915-20670 1304-1425
P-7379 1/4A DISC Inconel 19400-21200 1338-1462
P-7381 1/4A DISC Inconel 19885-21730 1371-1498
P-7382 1/4A DISC Inconel 21000-22000 1448-1517
P-7383 1/4A DISC Inconel 21825-23850 1505-1644
P-7385 1/4A DISC Inconel 24250-26500 1672-1827

All general terms and conditions of sale, including limitations of our liability, apply to all products and services sold. 13
Rupture Disc Stock Part List - 1/4 Angle Disc - cont

Part Pressure Pressure

Number Description Material Range Range
(psi) (bar)

P-7387 1/4A DISC Inconel 25220-27560 1739-1900

P-7389 1/4A DISC Inconel 26190-28620 1806-1973
P-7391 1/4A DISC Inconel 27160-29680 1873-2046
P-7393 1/4A DISC Inconel 29100-31800 2006-2192
P-7395 1/4A DISC Inconel 30070-32860 2073-2266
P-7397 1/4A DISC Inconel 31525-34450 2174-2375
P-7399 1/4A DISC Inconel 33950-37100 2341-2558
P-7401 1/4A DISC Inconel 36375-39750 2508-2741
P-7403 1/4A DISC Inconel 38880-42400 2681-2923
P-7405 1/4A DISC Inconel 41255-45050 2844-3106
P-7407 1/4A DISC Inconel 43650-47700 3010-3289
P-7409 1/4A DISC Inconel 48500-53000 3344-3654
P-7411 1/4A DISC Inconel 53350-58300 3678-4020
P-7413 1/4A DISC Inconel 58200-63600 4013-4385
P-7415 1/4A DISC Inconel 62155-66000 4285-4550
P-7417 1/4A DISC Inconel 65960-72080 4548-4970
P-7419 1/4A DISC Inconel 68870-75260 4748-5189

14 All general terms and conditions of sale, including limitations of our liability, apply to all products and services sold.
Rupture Disc Stock Part List - 1/2 Flat Disc

Part Pressure Pressure

Number Description Material Range Range
(psi) (bar)

P-7601 1/2F DISC Inconel 485-530 33-37

P-7603 1/2F DISC Inconel 679-742 47-51
P-7605 1/2F DISC Inconel 727-795 50-55
P-7607 1/2F DISC Inconel 873-954 60-73
P-7609 1/2F DISC Inconel 970-1060 67-75
P-7610 1/2F DISC Inconel 1006-1100 69-76
P-7611 1/2F DISC Inconel 1164-1272 80-88
P-7613 1/2F DISC Inconel 1213-1323 84-91
P-7615 1/2F DISC Inconel 1358-1484 94-102
P-7617 1/2F DISC Inconel 1455-1590 100-110
P-7619 1/2F DISC Inconel 1552-1696 107-117
P-7621 1/2F DISC Inconel 1697-1855 117-128
P-7623 1/2F DISC Inconel 1746-1908 120-132
P-7625 1/2F DISC Inconel 1940-2120 134-146
P-7627 1/2F DISC Inconel 2183-2385 151-164
P-7629 1/2F DISC Inconel 2271-2438 157-168
P-7631 1/2F DISC Inconel 2425-2650 167-183
P-7633 1/2F DISC Inconel 2619-2862 181-197
P-7635 1/2F DISC Inconel 2716-2968 187-204
P-7637 1/2F DISC Inconel 2910-3180 201-219
P-7639 1/2F DISC Inconel 3104-3392 214-234
P-7641 1/2F DISC Inconel 3395-3710 234-256
P-7643 1/2F DISC Inconel 3589-3922 247-270
P-7645 1/2F DISC Inconel 3637-3975 251-274
P-7647 1/2F DISC Inconel 3880-4240 268-292
P-7649 1/2F DISC Inconel 4365-4770 301-329
P-7651 1/2F DISC Inconel 4462-4876 308-336
P-7653 1/2F DISC Inconel 4850-5300 334-365
P-7655 1/2F DISC Inconel 5335-5830 368-402
P-7657 1/2F DISC Inconel 5626-6148 388-424
P-7659 1/2F DISC Inconel 5820-6360 401-438
P-7661 1/2F DISC Inconel 6305-6890 435-475
P-7663 1/2F DISC Inconel 6790-7420 468-512
P-7665 1/2F DISC Inconel 7275-7950 502-548
P-7667 1/2F DISC Inconel 7760-8480 535-585
P-7669 1/2F DISC Inconel 8245-9010 568-621
P-7671 1/2F DISC Inconel 8730-9540 602-658
P-7673 1/2F DISC Inconel 9700-10600 669-731

All general terms and conditions of sale, including limitations of our liability, apply to all products and services sold. 15
Accessories - Instrument Quality Pressure Gauges
Pressures to 80,000 psi (5116 bar)

Gauges - Pressure gauges are offered for use in low, medium

and high pressure systems. Instrument quality gauges are
available to pressure of 80,000 psi (5115.7 bar).

Materials and Features

Accuracy within 0.5% of full scale range
1/4" F250C Autoclave high pressure connection
Plastic dial cover/solid front aluminum alloy case
Blow-out back panel for pressure relief in the event of
Bourdon tube failure
316 Stainless steel Bourdon tubes**
Gauges available with bottom and back connections
Precision stainless steel movement for accuracy and
resistance to atmospheric corrosion
Pointer zero adjustment located on front of gauge behind
dial cover for convenience
Gauges are commercially cleaned when shipped
Gauges up to 20,000 psi (1379 bar) oxygen cleaned
upon request
Gauges glycerin filled upon request
Gauges available with dual scale face plates
Standard gauges are rated from -20F (-30C) to
150F (65C)

Instrument quality gauges

Optional electrical contact face - Available for all instrument

quality gauges. With adjustable low and high electrical con-
tacts, this option permits gauges to provide pressure control
for automatic or remote operation, or for fail-safe set points.

**Bourdon tube material for 0-30,000 psi (0-2068 bar)

gauge is K Monel. Bourdon tube material for 0-50,000 psi
(0-3447 bar) and 0-80,000 psi (0-5116 bar) gauge is
Inconel 718.

16 All general terms and conditions of sale, including limitations of our liability, apply to all products and services sold.
Note: Gauge connections are 1/4 (F250C) coned-and-threaded connection. Furnished with collar and gland.

Bottom connection calibrated in psi only 1.62

(41.15)
.585
(14.86)
Pressure Minor Interval Dial
Catalog Range Value Diameter
Number psi (bar) psi (bar) inches (mm)

P-0499-CG 0-1,000 (0-69) 10 (.69) 4-1/2 (114.3)

P-0479-CG 0-1,500 (0-103) 10 (.69) 4-1/2 (114.3) 5.8
(147.2)

P-0480-CG 0-3,000 (0-207) 20 (1.38) 4-1/2 (114.3)

P-0481-CG 0-5,000 (0-345) 50 (3.44) 4-1/2 (114.3)
A
P-0482-CG 0-10,000 (0-690) 100 (6.89) 4-1/2 (114.3) 0.875 1.625
(22.23) (41.28)
P-0483-CG 0-15,000 (0-1034) 100 (6.89) 4-1/2 (114.3)
P-0487-CG 0-20,000 (0-1379) 200 (13.79) 4-1/2 (114.3) Back
Connection
P-0488-CG** 0-30,000 (0-2068) 250 (17.24) 6 (152.4)
P-0489-CG** 0-50,000 (0-3447) 500 (34.47) 6 (152.4) Models
P-0489-CG
P-0490-CG
P-0490-CG** 0-80,000 (0-5116) 1,000 (68.94) 6 (152.4) Only

Back connection gauges calibrated in psi only

Pressure Minor Interval Dial
Catalog Range Value Diameter
Number psi (bar) psi (bar) inches (mm) 120
TYPICAL
P-0482B-CG 0-10,000 (0-690) 100 (6.89) 4-1/2 (114.3)
P-0483B-CG 0-15,000 (0-1034) 100 (6.89) 4-1/2(114.3)
P-0487B-CG 0-20,000 (0-1379) 200 (13.79) 4-1/2 (114.3)
P-0488B-CG 0-30,000 (0-2068) 250 (17.24) 6 (152.4) IAME
TER
"B" D
P-0489B-CG 0-50,000 (0-3447) 500 (34.47) 6 (152.4)

Optional Electrical Contact Face

Catalog Number Fits Gauge Dial Diameter "C" DIAMETER

inches - (mm)
P-0713 4-1/2 (114.3)
P-0714 6 (152.4)
Gauge A B C
**Bourdon tube material for 0-30,000 psi (0-2068 bar) Size cutout inches - (mm) inches - (mm)
inches - (mm) inches - (mm)
gauge is K Monel. Bourdon tube material for 0-50,000 psi
4-1/2 (114.3) 4.937 (125.39) 5.375 (136.52) .218 (5.54)
(0-3447 bar) and 0-80,000 psi (0-5116 bar) gauge is
6 (152.4) 6.437 (163.49) 7.0 (177.80) .218 (5.54)
Inconel 718.
All general terms and conditions of sale, including limitations of our liability, apply to all products and services sold. 17
Accessories - Gauge/Instrument Snubbers
Pressures to 60,000 psi (4137 bar)

Parker Autoclave Engineers Pressure Snubbers provide

protection to gauges and instrumentation from pressure
surges, pulsation and shock. The unique snubber design
provides superior instrument protection while not compromis-
ing instrument accuracy or reaction time. This is accomplished
by the use of existing technology from our excess flow check
valve with additional design features.

When sudden flow is seen, the poppet will rise, blocking the
pressure surge and a small bleed hole in the poppet will allow
pressure to slowly equalize. When the pressure is equalized,
the poppet will then drop back down allowing normal flow to
the gauge. A filter is used to prevent the hole in the plug from
becoming plugged. The snubber must be mounted in the
vertical position as indicated on the unit.

Snubbers are offered in 316SS as standard, with either male,

female or male/female connections in 1/4" and 3/8" sizes.
Optional materials available upon request.

Typical catalog number: SNB F H4 F H4

SNB F H4 F H4
Gauge Female Inlet Female Outlet
Snubber Connection Connection

Available End Connections

H4 - 1/4" High Pressure - F250C
H6 - 3/8" High Pressure - F375C

INLET

18 All general terms and conditions of sale, including limitations of our liability, apply to all products and services sold.
Accessories - Gauge/Instrument Snubbers

Catalog Pressure Dimensions Inches (mm) Fig

Number Rating psi (bar) A B C D Hex

SNBFH4FH4 60,000 (4137) 3.36 (85.34) 2.50 (63.50) 0.50 (12.70) 0.63 (15.33) 1.19 (30.15) 1
SNBFH4MH4 60,000 (4137) 4.05 (102.87) 2.50 (63.50) 0.50 (12.70) 0.63 (15.33) 1.19 (30.15) 2
SNBMH6MH4 60,000 (4137) 3.68 (93.47) 2.13 (54.10) 1.50 (38.10) 0.75 (19.05) 1.19 (30.15) 3

Figure 1

A B
B

D HEX HEX
D HEX A HEX
C
B C
C
C

D HEX HEX

C A
A C

B
Figure 2 B

HEX
HEX B D HEX D HEX

HEX C C
D HEX

Figure 3

A C
A B C

B
A C
HEX D HEX
B
HEX D HEX

HEX D HEX

All general terms and conditions of sale, including limitations of our liability, apply to all products and services sold. 19
WARNING
FAILURE, IMPROPER SELECTION OR IMPROPER USE OF THE PRODUCTS AND/OR SYSTEMS DESCRIBED HEREIN OR RELATED ITEMS CAN CAUSE DEATH, PERSONAL INJURY AND PROPERTY DAMAGE.
This document and other information from Parker Hannifin Corporation, its subsidiaries and authorized distributors provide product and/or system options for further investigation by users having technical
expertise. It is important that you analyze all aspects of your application and review the information concerning the product or system in the current product catalog. Due to the variety of operating conditions
and applications for these products or systems, the user, through its own analysis and testing, is solely responsible for making the final selection of the products and systems and assuring that all performance,
safety and warning requirements of the application are met. The products described herein, including without limitation, product features, specifications, designs, availability and pricing, are subject to change by
Parker Hannifin Corporation and its subsidiaries at any time without notice.

Offer of Sale
The items described in this document are available for sale by Parker Hannifin Corporation, its subsidiaries or its authorized distributors. Any sale contract entered by Parker will be governed by the provisions
stated in Parker's standard terms and conditions of sale (copy available upon request).

2013 Parker Hannifin Corporation | Autoclave Engineers is a registered trademark of the Parker Hannifin Corporation 02-0134SE January2013

Caution! Do not mix or interchange parts or tubing with those of

other manufacturers. Doing so is unsafe and will void warranty.

For over 50 years Parker Autoclave Engineers has designed

and built premium quality valves, fittings and tubing. This
commitment to engineering and manufacturing excellence
has earned Parker Autoclave a reputation for reliable, efficient
product performance and has established Autoclave as the
worldwide leader in high pressure fluid components for the oil
and gas industry.
Parker Autoclave Engineers designs and builds high pres-
sure valves, fittings and tubing for use with sour oil and gas
(H2S). Parker Autoclave Engineers SOG components meet
or exceed all requirements of NACE MR0175-2002.

High Pressure Valve Features:

Rising stem/barstock body design.

Metal-to-metal seating achieves bubble-tight shut-off,

longer stem/seat life in abrasive flow, greater durabil-
ity for repeated on/off cycles and excellent corrosion
resistance.

PTFE encapsulated packing provides dependable stem

and body sealing.

Solid, one-piece stem provides an economical valve for

SOG service.

Optional non-rotating stem assembly available.

Stem and packing gland materials have been selected to

optimize thread cycle life.

Parker Autoclave Engineers valves are complemented by

a complete line of high pressure fittings, tubing and check
valves. All high pressure valves and fittings use Parker
Autclave Engineers' high pressure coned-and-threaded con-
Sour Service Products
nections for dependable performance under widely varying
conditions.

www.autoclaveengineers.com
All general terms and conditions of sale, including limitations of our liability, apply to all products and services sold.
www.autoclave.com 1
Sour Service Products - Oil and Gas Service Valves and Fittings
Oil and Gas Service Valves and Fittings

Parker Autoclave Engineers offers a complete series of high

pressure valves and fittings for wellhead christmas trees.
Parker Autoclave Engineers components are designed and
manufactured to meet or exceed API and other applicable
specifications for wellhead equipment, as well as Parker Auto-
clave Engineers' own exacting standards for safety, reliability
and service life under high pressure operation.

Sour Oil and Gas Service (H2S) or Standard Service

Parker Autoclave Engineers' oil field components are offered
for standard oil field service where H2S is not present and
type SOG for service where H2S is present. Parker Autoclave
Engineers' SOG components are manufactured with materi-
als and procedures specified for optimum resistance to H2S.
These material specifications and manufacturing procedures
are continually updated to incorporate the latest advances
and customer requirements. All pressure-containing materials
comply with the requirements of NACE MR0175.

Pressure/Temperature Ratings: Valves and fittings for stan-

dard service are rated for working pressure up to 60,000 psi
(4137 bar) at 100F (38C). Type SOG components are rated
up to 30,000 psi (2068 bar) at 100F (38C).

Sizes: Parker Autoclave Engineers' type SOG valves and

fittings are supplied with standard API test and gauge connec-
tions (Parker Autoclave Engineers' F562C). Coned-and-thread-
ed tubing connections in other sizes are available to meet
individual requirements. Parker Autoclave Engineers stocks a
wide selection of sizes for immediate shipment.

Materials: Parker Autoclave Engineers standard series valves

and fittings are type 316 stainless steel, cold worked material.
Type SOG valves and fittings are 316 stainless steel annealed
material with PTFE packing below the stem threads on all
needle valves. If required, complete material specifications
are provided. All pressure-containing materials used are in
accordance with NACE MR0175.

Note:
For connection torque values, see tools section,
special material connection torque table.
API Type I API Type II API Type III All sour oil and gas valves and fittings supplied
connector connector connector without collars and glands unless otherwise
specified.

2 All general terms and conditions of sale, including limitations of our liability, apply to all products and services sold.
Sour Service Products - Wellhead Gauge and Bleed Valves
Pressures to 20,000 psi (1379 bar)

Wellhead Gauge Valve

Pressure/
Tube Temperature
Outside Rating
Series Diameter Orifice psi (bar)
Size Connection Size Rated @ Room
Inches Type Inches (mm) Cv Temperature

20GV 3/8 SF375CX 0.125 (3.18) 0.23 10,000 (690)

20GV 9/16 SF562CX 0.125 (3.18) 0.23 10,000 (690)
30GV 9/16 F562C 0.125 (3.18) 0.33 20,000 (1379)

Bleed Valve
20BV 3/8 SM375CX 0.093 (2.36) - 10,000 (690)
20BV 9/16 SM562CX 0.093 (2.36) - 10,000 (690)
30BV 9/16 M562C 0.093 (2.36) - 20,000 (1379)*
Notes:
* Rating shown is in closed position.
Rating @ 15,000 psi (1034 bar) in open position. Gauge Valve Features:
One inlet, three outlet ports, all ports are 9/16" API test
Parker Autoclave Engineers' Wellhead Gauge valves are
and gauge connection ports.
designed for reliable shut-off service at a maximum work-
Metal-to-metal bubble tight shut-off
ing pressure of 20,000 psi (1379 bar). The Wellhead Gauge
Packing below stem threads
and Bleed Valves are standard in 316 stainless steel annealed
Two piece non-rotating stem on standard service and
material and comply with NACE MR0175. Special materials
SOG valves
available on request.
Optional use of long nipples in the inlet for installation on
Applications: headers that are insulated.
Wellhead Gauge Valve
Bleed Valve Features:
Sample Lines
One piece hex construction allows easy installation
Instrument calibration
Vent port tapped for plumbing to safe area
Tee handle for easy operation
Bleed Valve
Positive blow out prevention on stem
Pressure bleed
Compatible with standard API test and gauge connections
for 15,000 psi (1034 bar) service.
Ordering Procedure
Wellhead Gauge Valve - 30GV-SOGWO valves are furnished without collars and glands unless otherwise specified.

Typical catalog number: 30GV9078 - SOGWO

30GV 9 07 8 SOGWO
Valve Outside Diameter Stem Body
Series Tube Size Type Pattern
20GV 6-3/8 00 - one piece VEE stem 8 - 4 ports, 1 inlet, 3 outlets Sour gas
30GV 9-9/16 07- non-rotating VEE stem without
glands and
collars
Bleed Valve
Typical catalog number: 30BV9002- SOG

30BV 9 00 2 SOG
Valve Outside Diameter Stem Body
Series Tube Size Type Pattern
20BV 6-3/8 00 - one piece VEE stem 2 -Angle Sour gas
30BV 9-9/16
All general terms and conditions of sale, including limitations of our liability, apply to all products and services sold. 3
Wellhead Gauge Valve

Catalog Connection Connection Pressure Rating Dimensions - inches (mm)

Valve
Number Type Size psi (bar) A B C D E F G H J Pattern

SF375CX 3/8 10,000 2.00 3.12 2.00 4.75 1.13 1.00 0.50 0.94 3.00
20GV6078-SOG
(690) (50.80) (79.25) (50.80) (120.65) (28.58) (25.40) (12.70) (23.83) (76.20)
SF562CX 9/16 10,000 2.00 3.88 2.75 4.54 1.31 1.38 0.66 0.94 3.00 See
20GV9078-SOG
(690) (50.80) (98.55) (69.85) (115.31) (33.27) (34.93) (16.76) (23.83) (76.20) Figure 1
F562C 9/16 20,000 2.00 3.88 2.75 4.75 1.31 1.38 0.66 0.94 3.00
30GV9078-SOG
(1379) (50.80) (98.55) (69.85) (120.65) (33.27) (34.93) (16.76) (23.83) (76.20)

Mounting Dimensions
J
K L M Dia.
20GV6078-SOG .25 (6.4) .25 (6.4) .28 (7.1)
20GV9078-SOG .38 (9.7) .38 (9.7) .28 (7.1)
30GV9078-SOG .38 (9.7) .38 (9.7) .28 (7.1)
D K

"M" L
OUT
A
H
G OUT
IN GAUGE
F
E
C B
OUT

Figure 1 - Wellhead Gauge Valve

Bleed Valve

Catalog Connection Connection Pressure Rating Dimensions - inches (mm)

Valve
Number Type Size psi (bar) A B C D E F G H J Pattern

SM375CX 3/8 10,000 3.23 2.42 1.12 1.38 1.50

20BV6002-SOG
(690) (82.04) (61.47) (28.45) (35.05) (38.10)
SM562CX 9/16 10,000 3.68 2.86 1.13 1.38 1.50
20BV9002-SOG
(690) (93.47) (76.64) (28.70) (35.05) (38.10) See
M250C 1/4 20,000 3.06 2.24 1.12 1.38 1.50 Figure 2
30BV4002-SOG
(1379) (77.72) (56.90) (28.45) (35.05) (38.10)
M562C 9/16 20,000 3.44 2.61 1.12 1.38 1.50
30BV9002-SOG
(1379) (87.38) (66.29) (28.45) (35.05) (38.10)

D HEX C
A
B

Connection
Type

1/8 NPT (F)

Connection

Figure 2 - Bleed Valve

4 All general terms and conditions of sale, including limitations of our liability, apply to all products and services sold.
Sour Service Products - 30VM-SOGWO Series
Pressures to 20,000 psi (1379 bar)

Pressure/
Tube Temperature
Outside Rating
Diameter Orifice psi (bar)
Size Connection Size Rated @ Room
Inches Type Inches (mm) Cv* Temperature**

1/4 F250C 0.094 (2.39) 0.12 20,000 (1379)

3/8 F375C 0.125 (3.18) 0.23 20,000 (1379)
9/16 F562C 0.125 (3.18) 0.33 20,000 (1379)

Notes:
* CV values shown are for 2-way straight valve pattern. For 2-way
angle patterns, increase CV value 50%.

** For complete temperature ratings see pressure/temperature rating

guide in Technical Information section.

Generalized Flow Coefficient Curves (Cv)

304SS
6
POWDER COATED
PACKING STAINLESS STEEL
Number of turns open

GLAND HANDLE

ANNEALED TYPE 316 SS

5
BODY IN FIVE PATTERNS Regulating Stem
LOCKING DEVICE 4
ONE PIECE
K-MONEL STEM
ADJUSTABLE PACKING
BELOW THREADS
ANTI-EXTRUSION 3
BACK-UP RINGS

1
Vee Stem
0
10 20 30 40 50 60 70 80 90 100
CHOICE OF VEE OR
REGULATING STEM TIP % of rated Cv
METAL-TO-METAL SEATING

Note: For information on standard 30VM valves, refer to the Needle Valve Section.

Ordering Procedure
The 30VM-SOGWO Series valves are furnished without collars and glands, unless otherwise specified.

Typical catalog number: 30VM4001-SOGWO

30VM 4 00 1 SOGWO
Valve Outside Diameter Stem/Seat Body
Series Tube Size Type Pattern
4-1/4 00 - One piece rotating Vee stem 1 - two-way straight SOG-Sour Gas
6-3/8 01 - One piece rotating Regulating stem 2 - two-way angle SOGWO-Sour Gas
9-9/16 without glands &
07 - non-rotating Vee stem (on-off service) 3 - three-way, two on pressure
collars
08 - non-rotating Regulating stem 4 - three-way, one on pressure
(tapered tip for regulating and shutoff) 5 - three-way, two-stem
80 - One piece Vee stem with replaceable seat manifold valve
81 - One piece Regulating stem with
replaceable seat
88 - Regulating stem with replaceable seat

All general terms and conditions of sale, including limitations of our liability, apply to all products and services sold. 5
Valve Maintenance

Repair Kits: add R to the front of valve catalog Note:

number for proper repair kit. All sour service valves and fittings supplied without collars
(Example: R30VM4001-SOGWO) and glands unless otherwise specified.
Valve Bodies: Valve bodies are available. Order using the
eight (8) digit part number found in the valve drawing or
contact your Sales Representative for information.
Consult your Parker Autoclave Engineers representative for
pricing on repair kits and valve bodies. Refer to the Tools,
Installation, Operation and Maintenance section for proper
maintenance procedures.

Dimensions - inches (mm) Block

Catalog Outside
Stem Orifice Thick- Valve
Diameter
Number Type
Tube
Diameter
A B C D D1 E F G G1 H* M N ness Pattern

2-Way Straight
30VM4001-SOGWO VEE 1/4 0.094 2.00 1.00 0.50 1.50 1.12 2.00 3.00 1.00 0.22 4.62 0.69 0.38 1.00
30VM4081-SOGWO REG (6.35) (2.39) (50.80) (25.40) (12.70) (38.10) (28.45) (50.80) (76.20) (25.40) (5.59) (117.35) (17.53) (9.65) (25.40)
30VM6001-SOGWO VEE 3/8 0.125 2.00 1.00 0.53 1.50 1.12 2.00 3.00 1.00 0.22 4.68 0.69 0.38 1.00 See
30VM6081-SOGWO REG (9.53) (3.18) (50.80) (25.40) (13.46) (38.10) (28.45) (50.80) (76.20) (25.40) (5.59) (118.87) (17.53) (9.65) (25.40) Figure 1
30VM9001-SOGWO VEE 9/16 0.125 2.62 1.31 0.81 1.56 1.12 2.44 3.00 1.00 0.28 5.06 0.69 0.38 1.50
30VM9081-SOGWO REG (14.29) (3.18) (66.55) (33.27) (20.57) (39.62) (28.45) (61.98) (76.20) (25.40) (7.11) (128.52) (17.53) (9.65) (38.10)

2-Way Angle
30VM4002-SOGWO VEE 1/4 0.094 2.00 1.00 0.50 1.12 2.00 3.00 1.00 0.22 4.62 0.69 0.38 1.00
30VM4082-SOGWO REG (6.35) (2.39) (50.80) (25.40) (12.70) (28.45) (50.80) (76.20) (25.40) (5.59) (117.35) (17.53) (9.65) (25.40)
30VM6002-SOGWO VEE 3/8 0.125 2.00 1.00 0.53 1.12 2.12 3.00 1.00 0.22 4.74 0.69 0.38 1.00 See
30VM6082-SOGWO REG (9.53) (3.18) (50.80) (25.40) (13.46) (28.45) (53.85) (76.20) (25.40) (5.59) (120.40) (17.53) (9.65) (25.40) Figure 2
30VM9002-SOGWO VEE 9/16 0.125 2.62 1.31 0.81 1.12 2.44 3.00 1.00 0.28 5.06 0.69 0.38 1.50
30VM9082-SOGWO REG (14.29) (3.18) (66.55) (33.27) (20.57) (28.45) (61.98) (76.20) (25.40) (7.11) (128.52) (17.53) (9.65) (38.10)

3-Way / 2 on Pressure
30VM4003-SOGWO VEE 1/4 0.094 2.00 1.00 0.50 1.50 1.12 2.12 3.00 1.00 0.22 4.74 0.69 0.38 1.00
30VM4083-SOGWO REG (6.35) (2.39) (50.80) (25.40) (12.70) (38.10) (28.45) (53.85) (76.20) (25.40) (5.59) (120.40) (17.53) (9.65) (25.40)
30VM6003-SOGWO VEE 3/8 0.125 2.00 1.00 0.53 1.50 1.12 2.50 3.00 1.00 0.22 5.12 0.69 0.38 1.00 See
30VM6083-SOGWO REG (9.53) (3.18) (50.80) (25.40) (13.46) (38.10) (28.45) (63.50) (76.20) (25.40) (5.59) (130.05) (17.53) (9.65) (25.40) Figure 3
30VM9003-SOGWO VEE 9/16 0.125 2.62 1.31 0.81 1.56 1.12 2.88 3.00 1.00 0.28 5.49 0.69 0.38 1.50
30VM9083-SOGWO REG (14.29) (3.18) (66.55) (33.27) (20.57) (39.62) (28.45) (73.15) (76.20) (25.40) (7.11) (139.45) (17.53) (9.65) (38.10)

G - Packing gland mounting hole drill size All dimensions for reference only and subject to change. For prompt service,
G1 - Bracket mounting hole size * H Dimension is with stem in the closed position. Parker Autoclave Engineers stocks
Panel mounting drill size: 0.22 all valves. select products. Consult factory.

Figure 1 Figure 2 Figure 3

F
F F

G1 M M G1 M G1 M M
M
G H N G H N G
H N
D1
D1 D D
D
E E
E
C
C
C
B
A B
B A
A
2-Way Straight 2-Way Angle 3-Way / 2 on Pressure

6 All general terms and conditions of sale, including limitations of our liability, apply to all products and services sold.
Dimensions - inches (mm) Block
Catalog Outside
Stem Orifice Thick- Valve
Diameter
Number Type
Tube
Diameter
A B C D D1 E F G G1 H* M N ness Pattern

3-Way / 1 on Pressure
30VM4004-SOGWO VEE 1/4 0.094 2.00 1.00 0.50 1.12 2.00 3.00 1.00 0.22 4.62 0.69 0.38 1.00
30VM4084-SOGWO REG (6.35) (2.39) (50.80) (25.40) (12.70) (28.45) (50.80) (76.20) (25.40) (5.59) (117.35) (17.53) (9.65) (25.40)
30VM6004-SOGWO VEE 3/8 0.125 2.00 1.00 0.53 1.12 2.12 3.00 1.00 0.22 4.74 0.69 0.38 1.00 See
30VM6084-SOGWO REG (9.53) (3.18) (50.80) (25.40) (13.46) (28.45) (53.85) (76.20) (25.40) (5.59) (120.40) (17.53) (9.65) (25.40) Figure 4
30VM9004-SOGWO VEE 9/16 0.125 2.62 1.31 0.81 1.12 2.44 3.00 1.00 0.28 5.12 0.69 0.38 1.50
30VM9084-SOGWO REG (14.29) (3.18) (66.55) (33.27) (20.57) (28.45) (61.98) (76.20) (25.40) (7.11) (130.05) (17.53) (9.65) (38.10)

2-Way Angle / Replaceable Seat

30VM4802-SOGWO VEE 1/4 0.094 2.00 1.00 0.50 1.12 2.06 2.38 3.00 1.00 0.22 5.80 0.69 0.38 1.00
30VM4882-SOGWO REG (6.35) (2.39) (50.80) (25.40) (12.70) (28.45) (52.32) (60.45) (76.20) (25.40) (5.59) (147.32) (17.53) (9.65) (25.40)
30VM6802-SOGWO VEE 3/8 0.125 2.00 1.00 0.53 1.12 2.31 2.38 3.00 1.00 0.22 6.05 0.69 0.38 1.00 See
30VM6882-SOGWO REG (9.53) (3.18) (50.80) (25.40) (13.46) (28.45) (58.67) (60.45) (76.20) (25.40) (5.59) (153.67) (17.53) (9.65) (25.40) Figure 5
30VM9802-SOGWO VEE 9/16 0.125 2.62 1.31 0.81 1.19 2.62 2.44 3.00 1.00 0.28 6.45 0.69 0.38 1.50
30VM9882-SOGWO REG (14.29) (3.18) (66.55) (33.27) (20.57) (30.23) (66.55) (61.98) (76.20) (25.40) (7.11) (163.83) (17.53) (9.65) (38.10)

3-Way / 2-Stem Manifold

30VM4005-SOGWO VEE 1/4 0.094 2.00 1.00 0.50 1.53 1.12 3.06 3.00 1.00 0.22 5.68 0.69 0.38 1.00
30VM4085-SOGWO REG (6.35) (2.39) (50.80) (25.40) (12.70) (38.86) (28.45) (77.72) (76.20) (25.40) (5.59) (144.27) (17.53) (9.65) (25.40)
30VM6005-SOGWO VEE 3/8 0.125 2.00 1.00 0.53 1.62 1.12 3.25 3.00 1.00 0.22 5.87 0.69 0.38 1.00 See
30VM6085-SOGWO REG (9.53) (3.18) (50.80) (25.40) (13.46) (41.15) (28.45) (82.55) (76.20) (25.40) (5.59) (149.10) (17.53) (9.65) (25.40) Figure 6
30VM9005-SOGWO VEE 9/16 0.125 2.62 1.31 0.81 1.88 1.12 3.75 3.00 1.00 0.28 6.37 0.69 0.38 1.50
30VM9085-SOGWO REG (14.29) (3.18) (66.55) (33.27) (20.57) (47.75) (28.45) (95.25) (76.20) (25.40) (7.11) (161.80) (17.53) (9.65) (38.10)

Figure 4 Figure 5 Figure 6

F
F F
G1
M M
G1 M G1 M M G
M H N
G N G
H N D1
D
H D
D D E
E D1
E C
C C
B
D1 A
B
A A B
3-Way / 1 on Pressure 2-Way Angle / Replacable Seat 3-Way / 2-Stem Manifold

All general terms and conditions of sale, including limitations of our liability, apply to all products and services sold. 7
Sour Service Products - 60VM-SOGWO Series
Pressures to 30,000 psi (2068 bar)

Pressure/
Tube Temperature
Outside Rating
Diameter Orifice psi (bar)
Size Connection Size Rated @ Room
Inches Type Inches (mm) Cv* Temperature**

1/4 F250C 0.062 (1.57) 0.08 30,000 (2068)

3/8 F375C 0.062 (1.57) 0.09 30,000 (2068)
9/16 F562C 0.078 (1.98) 0.14 30,000 (2068)

Notes:
* CV values shown are for 2-way straight valve pattern. For 2-way
angle patterns, increase CV value 50%.

** For complete temperature ratings see pressure/temperature rating

guide in Technical Information section.

Generalized Flow Coefficient Curves (Cv)

7
POWDER COATED
STAINLESS STEEL
304SS PACKING GLAND HANDLE
6
Number of turns open

ANNEALED TYPE 316 SS BODY

IN FIVE PATTERNS
5
LOCKING DEVICE
ONE-PIECE
K-MONEL 4
STEM

ADJUSTABLE PACKING Regulating Stem

ANTI-EXTRUSION
BELOW THREADS
3
BACK-UP RINGS

1
Vee Stem
HIGH PRESSURE 0
CONED-AND-THREADED
CONNECTIONS
10 20 30 40 50 60 70 80 90 100
CHOICE OF VEE OR
REGULATING STEM TIP
METAL-TO-METAL SEATING
% of rated Cv

Note: For information in standard 60VM valves refer to the Needle Valve Section.

Ordering Procedure
The 60VM-SOGWO Series valves are furnished without glands and collars, unless otherwise specified.

Typical catalog number: 60VM4071-SOGWO

60VM 4 07 1 SOGWO
Valve Outside Diameter Stem/Seat Body
Series Tube Size Type Pattern
4-1/4 07 - non-rotating Vee stem 1 - two-way straight SOG-Sour Gas
6-3/8 (on-off service) 2 - two-way angle SOGWO-Sour
9-9/16 08 - non-rotating regulating stem Gas without
3 - three-way, two on pressure
(tapered tip for regulating and glands & collars
4 - three-way, one on pressure
shutoff)
5 - three-way, two-stem
81 - Regulating one piece stem with
manifold valve
replaceable seat
87 - Vee stem with replaceable seat
88 - Regulating stem with replaceable
seat

8 All general terms and conditions of sale, including limitations of our liability, apply to all products and services sold.
Valve Maintenance

Repair Kits: add R to the front of valve catalog Note: All sour service valves and fittings supplied without col-
number for proper repair kit. lars and glands unless otherwise specified.
(Example: R60VM4071-SOGWO)
Valve Bodies: Valve bodies are available. Order using the
eight (8) digit part number found in the valve drawing or
contact your Sales Representative for information.
Consult your Parker Autoclave Engineers representative for
pricing on repair kits and valve bodies. Refer to the Tools,
Installation, Operation and Maintenance section for proper
maintenance procedures.

Dimensions - inches (mm) Block

Catalog Outside
Stem Orifice Thick- Valve
Diameter
Number Type
Tube
Diameter
A B C D D1 E F G G1 H* M N ness Pattern

2-Way Straight
60VM4071-SOGWO VEE 1/4 0.062 2.00 1.00 0.50 1.69 1.31 2.12 3.00 1.00 0.22 4.75 0.69 0.38 1.00
60VM4081-SOGWO REG (6.35) (1.57) (50.80) (25.40) (12.70) (42.93) (33.27) (53.85) (76.20) (25.40) (5.59) (120.65) (17.53) (9.65) (25.40)
60VM6071-SOGWO VEE 3/8 0.062 2.00 1.00 0.53 1.69 1.31 2.25 3.00 1.00 0.22 4.87 0.69 0.38 1.00 See
Figure 1
60VM6081-SOGWO REG (9.53) (1.57) (50.80) (25.40) (13.46) (42.93) (33.27) (57.15) (76.20) (25.40) (5.59) (123.70) (17.53) (9.65) (25.40)
60VM9071-SOGWO VEE 9/16 0.078 2.62 1.31 0.72 1.75 1.31 2.50 3.00 1.00 0.28 5.13 0.69 0.38 1.50
60VM9081-SOGWO REG (14.29) (1.98) (66.55) (33.27) (18.29) (45.45) (33.27) (63.50) (76.20) (25.40) (7.11) (130.30) (17.53) (9.65) (38.10)

2-Way Angle
60VM4072-SOGWO VEE 1/4 0.062 2.00 1.00 0.50 1.31 2.38 3.00 1.00 0.22 5.00 0.69 0.38 1.00
60VM4082-SOGWO REG (6.35) (1.57) (50.80) (25.40) (12.70) (33.27) (60.45) (76.20) (25.40) (5.59) (127.00) (17.53) (9.65) (25.40)
60VM6072-SOGWO VEE 3/8 0.062 2.00 1.00 0.53 1.31 2.62 3.00 1.00 0.22 5.25 0.69 0.38 1.00 See
Figure 2
60VM6082-SOGWO REG (9.53) (1.57) (50.80) (25.40) (13.46) (33.27) (66.55) (76.20) (25.40) (5.59) (133.35) (17.53) (9.65) (25.40)
60VM9072-SOGWO VEE 9/16 0.078 2.62 1.31 0.72 1.31 2.81 3.00 1.00 0.28 5.44 0.69 0.38 1.50
60VM9082-SOGWO REG (14.29) (1.98) (66.55) (33.27) (18.29) (33.27) (71.37) (76.20) (25.40) (7.11) (138.18) (17.53) (9.65) (38.10)

3-Way / 2 on Pressure
60VM4073-SOGWO VEE 1/4 0.062 2.00 1.00 0.50 1.69 1.31 2.12 3.00 1.00 0.22 4.75 0.69 0.38 1.00
60VM4083-SOGWO REG (6.35) (1.57) (50.80) (25.40) (12.70) (42.93) (33.27) (53.85) (76.20) (25.40) (5.59) (120.65) (17.53) (9.65) (25.40)
60VM6073-SOGWO VEE 3/8 0.062 2.00 1.00 0.53 1.69 1.31 2.25 3.00 1.00 0.22 4.87 0.69 0.38 1.00 See
60VM6083-SOGWO REG (9.53) (1.57) (50.80) (25.40) (13.46) (42.93) (33.27) (57.15) (76.20) (25.40) (5.59) (123.70) (17.53) (9.65) (25.40) Figure 3
60VM9073-SOGWO VEE 9/16 0.078 2.62 1.31 0.72 1.75 1.31 2.50 3.00 1.00 0.28 5.13 0.69 0.38 1.50
60VM9083-SOGWO REG (14.29) (1.98) (66.55) (33.27) (18.29) (45.45) (33.27) (63.50) (76.20) (25.40) (7.11) (130.30) (17.53) (9.65) (38.10)

Figure 1 Figure 2 Figure 3

F F F

G1 M G1 M M
G1 M M M
G H N G
G H N
H N
D1
D1 D D
D E
E
E C
C C
B B
A B A
A
2-Way Straight 2-Way Angle 3-Way / 2 on Pressure

All general terms and conditions of sale, including limitations of our liability, apply to all products and services sold. 9
Dimensions - inches (mm) Block
Catalog Outside
Stem Orifice Thick- Valve
Diameter
Number Type
Tube
Diameter
A B C D D1 E F G G1 H* M N ness Pattern

3-Way / 1 on Pressure
60VM4074-SOGWO VEE 1/4 0.062 2.00 1.00 0.50 1.31 2.38 3.00 1.00 0.22 5.00 0.69 0.38 1.00
60VM4084-SOGWO REG (6.35) (1.57) (50.80) (25.40) (12.70) (33.27) (60.45) (76.20) (25.40) (5.59) (127.00) (17.53) (9.65) (25.40)
60VM6074-SOGWO VEE 3/8 0.062 2.00 1.00 0.53 1.31 2.62 3.00 1.00 0.22 5.25 0.69 0.38 1.00 See
60VM6084-SOGWO REG (9.53) (1.57) (50.80) (25.40) (13.46) (33.27) (66.55) (76.20) (25.40) (5.59) (133.35) (17.53) (9.65) (25.40) Figure 4
60VM9074-SOGWO VEE 9/16 0.078 2.62 1.31 0.72 1.31 2.81 3.00 1.00 0.28 5.44 0.69 0.38 1.50
60VM9084-SOGWO REG (14.29) (1.98) (66.55) (33.27) (18.29) (33.27) (71.37) (76.20) (25.40) (7.11) (138.18) (17.53) (9.65) (38.10)

2-Way Angle / Replaceable Seat

60VM4872-SOGWO VEE 1/4 0.062 2.00 1.00 0.50 1.31 2.12 2.62 3.00 1.00 0.22 6.28 0.69 0.38 1.00
60VM4882-SOGWO REG (6.35) (1.57) (50.80) (25.40) (12.70) (33.27) (53.85) (66.55) (76.20) (25.40) (5.59) (159.51) (17.53) (9.65) (25.40)
60VM6872-SOGWO VEE 3/8 0.062 2.00 1.00 0.53 1.31 2.36 2.62 3.00 1.00 0.22 6.52 0.69 0.38 1.00 See
60VM6882-SOGWO REG (9.53) (1.57) (50.80) (25.40) (13.46) (33.27) (59.94) (66.55) (76.20) (25.40) (5.59) (165.60) (17.53) (9.65) (25.40) Figure 5
60VM9872-SOGWO VEE 9/16 0.078 2.62 1.31 0.72 1.31 2.68 2.62 3.00 1.00 0.28 6.90 0.69 0.38 1.50
60VM9882-SOGWO REG (14.29) (1.98) (66.55) (33.27) (18.29) (33.27) (68.07) (66.55) (76.20) (25.40) (7.11) (175.26) (17.53) (9.65) (38.10)

3-Way / 2-Stem Manifold

60VM4075-SOGWO VEE 1/4 0.062 2.00 1.00 0.50 1.72 1.31 3.44 3.00 1.00 0.22 6.07 0.69 0.38 1.00
60VM4085-SOGWO REG (6.35) (1.57) (50.80) (25.40) (12.70) (43.69) (33.27) (87.38) (76.20) (25.40) (5.59) (154.18) (17.53) (9.65) (25.40)
60VM6075-SOGWO VEE 3/8 0.062 2.00 1.00 0.53 1.88 1.31 3.75 3.00 1.00 0.22 6.37 0.69 0.38 1.00 See
60VM6085-SOGWO REG (9.53) (1.57) (50.80) (25.40) (13.46) (47.75) (33.27) (95.25) (76.20) (25.40) (5.59) (161.80) (17.53) (9.65) (25.40) Figure 6
60VM9075-SOGWO VEE 9/16 0.078 2.62 1.31 0.72 2.06 1.31 4.12 3.00 1.00 0.28 6.37 0.69 0.38 1.50
60VM9085-SOGWO REG (14.29) (1.98) (66.55) (33.27) (18.29) (52.32) (33.27) (104.65) (76.20) (25.40) (7.11) (161.80) (17.53) (9.65) (38.10)

Figure 4 Figure 5 Figure 6

F
F F
G1
M M
G1 M M
G1 M M N G
H
N G N G
H D1
H D

D D D E

E D1
E C
C B
C
D1 A

B B
A A

3-Way / 1 on Pressure 2-Way Angle / Replaceable Seat 3-Way / 2 Stem Manifold

10 All general terms and conditions of sale, including limitations of our liability, apply to all products and services sold.
Sour Service Products - High Pressure Fittings
Pressures to 30,000 psi (2068 bar)

Parker Autoclave Engineers manufactures high pressure

fittings for both standard oil field service where H2S is not
present and type SOGWO for service where H2S is present.
Utilizing Parker Autoclave Engineers high pressure coned-
and-threaded connections, the SOGWO fittings detailed on
this page are correlated for use with series 30VM-SOGWO and
60VM-SOGWO valves. Standard service fittings are correlated
for use with series 30VM and 60VM valves. For complete
information on standard service fittings, refer to Fitting and
Tubing High Pressure Section.

Connection Components
Type SOGWO valves and fittings are furnished without glands and collars. To order these components separately, use order num-
bers listed. When using plug, collar is not required.

Gland Collar Plug

CGL ( )- 316 SOG CCL ( )- 316 SOG CP ( )- 316 SOG

Add tube size ( ) Example: To ensure proper fit use Parker Autoclave Engineers tubing.
1/4 - 40 1/4 Gland - CGL (40) - 316 SOG
3/8 - 60
9/16 - 90

Connection Gland Collar Plug Connection Components

Type (Industry Standard)

F250C CGL40-316SOG CCL40-316SOG CP40-316SOG Parker Autoclave Engineers high pressure SOG fittings 1/4, 3/8
F375C CGL60-316SOG CCL60-316SOG CP60-316SOG and 9/16 connection components to 30,000 psi (2068 bar).
F562C CGL90-316SOG CCL90-316SOG CP90-316SOG For use with 30VM-SOGWO, 60VM-SOGWO valves and fittings.

Associated Products
A complete line of high pressure anti-vibration collet gland assemblies is available. Please refer to high pressure fitting and tubing
section.

All general terms and conditions of sale, including limitations of our liability, apply to all products and services sold. 11
Outside Pressure Dimensions - inches (mm)
Catalog Connection Minimum Block Fitting
Diameter Rating Opening A B C D E F G Thickness
Number Type Pattern
Tube psi (bar)* Typical Thickness

Elbow
CL4400- F250C 1/4 30,000 0.094 1.00 1.50 0.50 0.63 0.62 0.88 0.75
SOGWO (6.35) (2068.39) (2.39) (25.40) (38.10) (12.70) (15.88) (15.75) (22.35) (19.05)
CL6600- F375C 3/8 30,000 0.125 1.50 2.00 0.53 0.81 1.00 1.25 1.00 See
SOGWO (9.53) (2068.39) (3.18) (38.10) (50.80) (13.46) (20.62) (25.40) (31.75) (25.40) Figure 1
CL9900- F562C 9/16 30,000 0.188 1.88 2.62 0.81 1.19 1.12 1.88 1.50
SOGWO (14.29) (2068.39) (4.78) (47.75) (66.55) (20.57) (30.23) (28.45) (47.75) (38.10)

Tee
CT4440- F250C 1/4 30,000 0.094 1.25 2.00 0.50 0.63 0.88 1.00 1.00
SOGWO (6.35) (2068.39) (2.39) (31.75) (50.80) (12.70) (15.88) (22.35) (25.40) (25.40)
CT6660- F375C 3/8 30,000 0.125 1.56 2.00 0.53 0.81 1.06 1.00 1.00 See
SOGWO (9.53) (2068.39) (3.18) (39.62) (50.80) (13.46) (20.62) (26.92) (25.40) (25.40) Figure 2
CT9990- F562C 9/16 30,000 0.188 2.12 2.62 0.81 1.19 1.38 1.31 1.50
SOGWO (14.29) (2068.39) (4.78) (53.85) (66.55) (20.57) (30.23) (35.05) (33.27) (38.10)

Cross
CX4444- F250C 1/4 30,000 0.094 1.25 2.00 0.50 0.63 0.62 1.00 1.00
SOGWO (6.35) (2068.39) (2.39) (31.75) (50.80) (12.70) (15.88) (15.75) (25.40) (25.40)
CX6666- F375C 3/8 30,000 0.125 2.12 2.00 0.53 0.81 1.06 1.00 1.00 See
SOGWO (9.53) (2068.39) (3.18) (53.85) (50.80) (13.46) (20.62) (26.92) (25.40) (25.40) Figure 3
CX9999- F562C 9/16 30,000 0.188 2.75 2.62 0.81 1.19 1.38 1.31 1.50
SOGWO (14.29) (2068.39) (4.78) (69.85) (66.55) (20.57) (30.23) (35.05) (33.27) (38.10)

*Maximum pressure rating is based on the lowest rating of any component. NOTE: All sour oil and gas valves and fittings supplied without collars and glands unless otherwise
Actual working pressure may be determined by tubing pressure rating, if lower. specified.
All dimensions for reference only and subject to change.
For prompt service, Parker Autoclave Engineers stocks select products. Consult your local representative.

Figure 1 Figure 2 Figure 3

F
D HEX C
F F

C C
E
D
D HEX
E HEX
E
A A A

B B
B

Elbow Tee Cross

12 All general terms and conditions of sale, including limitations of our liability, apply to all products and services sold.
Outside Pressure Dimensions - inches (mm)
Catalog Connection Minimum Block Fitting
Number Diameter Rating A B C D E F G Thickness
Type Opening Pattern
Tube psi (bar)* Typical Thickness

Straight Coupling/Union Coupling

60F4433-SOGWO F250C 1/4 30,000 0.094 0.75 1.38 0.50 0.63 Straight
60UF4433-SOGWO (6.35) (2068.39) (2.39) (19.05) (35.05) (12.70) (15.88) Union
60F6633-SOGWO F375C 3/8 30,000 0.125 1.00 1.75 0.53 0.81 Straight See
60UF6633-SOGWO (9.53) (2068.39) (3.18) (25.40) (44.45) (13.46) (20.62) Union Figure 4
60F9933-SOGWO F562C 9/16 30,000 0.188 1.38 2.19 0.81 1.19 Straight
60UF9933-SOGWO (14.29) (2068.39) (4.78) (35.05) (55.63) (20.57) (30.15) Union

Bulkhead Coupling
60BF4433-SOGWO F250C 1/4 30,000 0.094 0.094 1.88 0.50 0.63 0.50 1.00 0.38
(6.35) (2068.39) (2.39) (23.88) (47.75) (12.70) (15.88) (12.70) (25.40) (9.65)
60BF6633-SOGWO F375C 3/8 30,000 0.125 1.12 2.38 0.53 0.81 0.78 1.38 0.38 See
(9.53) (2068.39) (3.18) (28.45) (60.45) (13.46) (20.62) (19.81) (35.05) (9.65) Figure 5
60BF9933-SOGWO F562C 9/16 30,000 0.188 1.69 2.75 0.81 1.19 1.00 1.88 0.38
(14.29) (2068.39) (4.78) (42.93) (69.85) (20.57) (30.23) (25.40) (47.75) (9.65)

All dimensions for reference only and subject to change.

For prompt service, Parker Autoclave Engineers stocks select products. Consult your local representative.

Figure 4 Figure 5

A HEX
G MAX

D F A D HEX
HEX
B C E
B C

Straight Coupling / Union Coupling Bulkhead Coupling

Union Couplings are designed with a removable seat insert allowing disassembly and tubing removal without the necessity of loosening other items in a line.

All general terms and conditions of sale, including limitations of our liability, apply to all products and services sold. 13
Sour Service Products - High Pressure Tubing
Pressures to 30,000 psi (2068 bar)

Parker Autoclave Engineers offers a complete selection of seamless annealed stain-

less steel tubing designed to match the performance standards of Parker Autoclave
Engineers valves and fittings for sour oil and gas service. Parker Autoclave Engi-
neers high pressure tubing is manufactured specifically for high pressure applica-
tions requiring both strength and corrosion resistance. The tubing is furnished in
random lengths between 20 feet (6 meters) and 27 feet (8.2 meters). The average is
24 feet (7.3 meters). Sour service tubing is available in three sizes.

Inspection and Testing

Parker Autoclave Engineers high pressure tubing is inspected to assure freedom from seams, laps, fissures or other flaws, as well
as carburization or intergranular carbide precipitation. The outside and inside diameters of the tubing are controlled within close
tolerences. Sample pieces of tubing for each lot are tested to confirm mechanical properties. Hydrostatic testing is also performed
on a statistical basis and is conducted at the working pressure of the tube. Autoclave will perform 100% hydrostatic testing at
additional cost if desired.

Tubing Tolerance
Nominal Tubing Size Tolerance/Outside Diameter
inches (mm) inches (mm)

1/4 (6.35) .248/.243 (6.30/6.17)

3/8 (9.53) .370/.365 (9.40/9.27)
9/16 (14.29) .557/.552 (14.15/14.02)

Catalog Tube Fits Tube Size Inches (mm) Flow Working Pressure psi (bar)*
Number Material Connection Outside Inside Wall Area -325 to 100F 200F 400F 600F 800F
Type Diameter Diameter Thickness in.2 (mm2) -198 - 37.8C 93C 204C 316C 427C

MS15-254 316SS F250C 1/4 0.083 0.083 0.005 30,000 30,000 28,750 27,000 25,250
(6.35) (2.11) (2.11) (3.23) (2068.39) (2068.39) (1982.21) (1861.56) (1741.00)

MS15-252 316SS F375C 3/8 0.125 0.125 0.012 30,000 30,000 28,750 27,000 25,250
(9.53) (3.18) (3.18) (0.30) (2068.39) (2068.39) (1982.21) (1861.56) (1741.00)

MS15-251 316SS F562C 9/16 0.188 0.187 0.028 30,000 30,000 28,750 27,000 25,250
(14.29) (4.78) (4.75) (0.71) (2068.39) (2068.39) (1982.21) (1861.56) (1741.00)

NOTE: All sour oil and gas valves and fittings supplied without collars and glands unless otherwise specified.

* 316SS annealed material complies with NACE MR0175 material requirements.

*Maximum pressure rating is based on the lowest rating of any component.

14 All general terms and conditions of sale, including limitations of our liability, apply to all products and services sold.
Sour Service Products - High Pressure Coned-and-Threaded Nipples
Pressures to 30,000 psi (2068 bar)

For rapid system make-up, Parker Autoclave Engineers

supplies pre-cut, coned-and-threaded nipples in various sizes
and lengths for Parker Autoclave Engineers high pressure valves
and fittings.

Special lengths
In addition to the standard lengths listed in the table below,
nipples are available in any custom length. Consult factory.

Materials
Catalog numbers in table refer to Type 316 Stainless steel.
Catalog numbers with suffix 316SOG denote 316SS annealed in
compliance with NACE MR0175.

Material in table is 316 Stainless steel

Catalog Number Working
Fits Tube Size inches
Nipple Length In (mm) Pressure
Connection (mm)
2.75 3.00 4.00 6.00 8.00 10.00 12.00 at 100F (37.8C)
Type
(69.85) (76.20) (101.60) (152.40) (203.20) (254.00) (304.80) O.D. I.D. psi (bar)

CN4402- CN4403- CN4404- CN4406- CN4408- CN44010- CN44012- F250C 1/4 0.083 30,000
316SOG 316SOG 316SOG 316SOG 316SOG 316SOG 316SOG (6.35) (2.11) (2068.39)

CN6603- CN6604- CN6606- CN6608- CN66010- CN66012- F375C 3/8 0.125 30,000
316SOG 316SOG 316SOG 316SOG 316SOG 316SOG (9.53) (3.18) (2068.39)

CN9904- CN9906- CN9908- CN99010- CN99012- F562C 9/16 0.188 30,000

316SOG 316SOG 316SOG 316SOG 316SOG (14.29) (4.78) (2068.39)

Note:
1. See Sour Service tubing section for pressure ratings at various temperatures.
2. Parker Autocalve Engineers does not recommend bending of SOG tubing.
*Maximum pressure rating is based on the lowest rating of any component.
Actual working pressure may be determined by tubing pressure rating, if lower.
All dimensions for reference only and subject to change.
For prompt service, Parker Autoclave Engineers stocks select products. Consult your local representative.

All general terms and conditions of sale, including limitations of our liability, apply to all products and services sold. 15
Sour Service Products - High Pressure Check Valves
Pressures to 30,000 (2068 bar)

O-Ring Check Valves

Provides unidirectional flow and tight shut-off for liquids and
gas with high reliability. When differential drops below crack-
ing pressure*, valve shuts off. (Not for use as relief valve.)
Materials: Body, cover, poppet: 316 Annealed Stainless Steel,
Cover gland: Annealed Stainless Steel, Spring: High Nickel
Alloy, Standard O-ring: Viton, for operation to 400 F (204C).
FLOW Buna-N or PTFE available for 250F (121C) or 400F (204C)
respectively; specify when ordering.
*Cracking Pressure: 20 psi (1.38 bar) 30%. Springs for
higher cracking pressures (up to 100 psi (6.89 bar)) available
on special order for O-ring style check valves only.

Ball Check Valves

Prevents reverse flow where leak-tight shut-off is not manda-
tory. When differential drops below cracking pressure, valve
closes. With all-metal components, valve can be used up
to 1200F (649C). See Technical Information section for
connection temperature limitations. (Not for use as a relief
valve.)
Ball and poppet are an integral design to assure positive, in-
FLOW line seating without chatter. Poppet is designed essentially
for axial flow with minimum pressure drop.
Materials: Body, cover, poppet: 316 Annealed Stainless Steel,
Cover gland: Annealed Stainless Steel, Ball, Spring: High
Nickel Alloy

Protects pressure gauges and pressure instrumentation from

Ball Type Excess Flow Valves surges in flow or sudden venting in the event of line failure.
Materials: Body, cover, sleeve: Type 316 Annealed Stainless
Steel, Ball: 300 Series Annealed Stainless Steel, Cover gland:
annealed stainless steel.
Vertical Installation: Since this type of check valve employs a
non-spring loaded ball, valve MUST be installed in VERTICAL
position with arrow on valve body pointing UP. (cover gland
up).
Resetting Valve: Equalize the pressure across the ball. The
ball will drop and reset automatically.
(Vertical Installation Only)
FLOW

NOTE: All sour oil and gas valves and fittings supplied without collars and glands unless
otherwise specified.

16 All general terms and conditions of sale, including limitations of our liability, apply to all products and services sold.
Sour Service Products - High Pressure Check Valves

Fits Pressure Orifice Dimensions - inches (mm)

Catalog Rated
Connection Rating inches
Number Cv A B C D Hex
Type psi (bar)* (mm) Typical

O-Ring Check Valves

CKO4400- F250C 30,000 0.094 0.15 3.38 2.50 0.50 0.63 1.18
SOGWO (2068.39) (2.39) (85.85) (63.50) (12.70) (16.00) (29.97)
CKO6600- F375C 30,000 0.125 0.28 3.75 2.62 0.53 0.75 1.18 See
SOGWO (2068.39) (3.18) (95.25) (66.55) (13.46) (19.05) (29.97) Figure 1
CKO9900- F562C 30,000 0.187 0.63 4.62 3.38 0.81 1.12 1.50
SOGWO (2068.39) (4.75) (117.35) (85.85) (20.57) (28.45) (38.10)

Ball Check Valves

CB4401- F250C 30,000 0.094 0.15 3.38 2.50 0.50 0.63 1.18
SOGWO (2068.39) (2.39) (85.85) (63.50) (12.70) (16.00) (29.97)
CB6601- F375C 30,000 0.125 0.28 3.75 2.62 0.53 0.75 1.18 See
SOGWO (2068.39) (3.18) (95.25) (66.55) (13.46) (19.05) (29.97) Figure 1
CB9901- F562C 30,000 0.187 0.63 4.62 3.38 0.81 1.12 1.50
SOGWO (2068.39) (4.75) (117.35) (85.85) (20.57) (28.45) (38.10)

Ball Type Excess Flow Valves

CK4402- F250C 30,000 0.094 3.38 2.50 0.50 0.63 1.18
SOGWO (2068.39) (2.39) (85.85) (63.50) (12.70) (16.00) (29.97)
CK6602- F375C 30,000 0.125 3.75 2.62 0.53 0.75 1.18 See
SOGWO (2068.39) (3.18) (95.25) (66.55) (13.46) (19.05) (29.97) Figure 1
CK9902- F562C 30,000 0.187 4.62 3.38 0.81 1.12 1.50
SOGWO (2068.39) (4.75) (117.35) (85.85) (20.57) (28.45) (38.10)

*Maximum pressure rating is based on the lowest rating of any component. NOTE: All sour oil and gas valves and fittings supplied without collars and glands unless
Actual working pressure may be determined by tubing pressure rating, if lower. otherwise specified.
All dimensions for reference only and subject to change.
For prompt service, Parker Autoclave Engineers stocks select products. Consult your local representative.

Figure 1

A
B

HEX D HEX

C C

All general terms and conditions of sale, including limitations of our liability, apply to all products and services sold. 17
Sour Service Products - Adapters/Couplings
Pressures to 30,000 psi (2068 bar)

How to use the Ordering Chart below:

1. Locate Male or Female end in horizontal heading.
2. Locate desired Female or Male emd of adapter down
the side of chart.
3. Catalog number of required adapter is located at
intersection of columns.

Male By Male Male NPT

(w/High-Pressure shown) (w/High-Pressure shown)

A Connection
Male Female
Connection A 1/4 M250C 3/8 M375C 9/16 M562C 1/4 F250C 3/8 F375C 9/16 F562C

Connection B
1/4 M250C 60MAH4H4-SOG 60MAH4H6-SOG 60MAH4H9-SOG 60M46B3-SOGWO 60M49B3-SOGWO
Male

3/8 M375C 60MAH6H6-SOG 60MAH6H9-SOG 60M64B3-SOGWO 60M69B3-SOGWO

30,000 psi @100F
AE High Pressure

9/16 M562C 60MAH9H9-SOG 60M94B3-SOGWO 60M96B3-SOGWO

1/4 F250C 60M64B3-SOGWO 60M94B3-SOGWO 60F4433-SOGWO 60F4633-SOGWO

Female

3/8 F375C 60M46B3-SOGWO 60M96B3-SOGWO 60F4633-SOGWO 60F6633-SOGWO 60F6933-SOGWO

9/16 F562C 60M49B3-SOGWO 60M69B3-SOGWO 60F4933-SOGWO 60F6933-SOGWO 60F9933-SOGWO

1/4 NPT 15MAH4P4-SOG 15MAH6P4-SOG 15MAH9P4-SOG 15M44N3-SOGWO 15M46N3-SOGWO 15M49N3-SOGWO

3/8 NPT 15MAH6P6-SOG 15MAH9P6-SOG 15M64N3-SOGWO 15M66N3-SOGWO 15M69N3-SOGWO

Male

1/2 NPT 15MAH4P8-SOG 15MAH6P8-SOG 15MAH9P8-SOG 15M84N3-SOGWO 15M86N3-SOGWO 15M89N3-SOGWO

3/4 NPT 10MAH9P12-SOG 10M124N3-SOGWO 10M126N3-SOGWO 10M129N3-SOGWO

NPT 10,000 psi*

1 NPT 10MAH9P16-SOG 10M164N3-SOGWO 10M166N3-SOGWO 10M169N3-SOGWO

@100F

1/4 NPT 15M44B8-SOG 15M64B8-SOG 15M94B8-SOG 15F4483-SOGWO 15F4683-SOGWO 15F4983-SOGWO

3/8 NPT 15M46B8-SOG 15M66B8-SOG 15M96B8-SOG 15F6483-SOGWO 15F6683-SOGWO 15F6983-SOGWO

Female

1/2 NPT 15M48B8-SOG 15M68B8-SOG 15M98B8-SOG 15F8483-SOGWO 15F8683-SOGWO 15F8983-SOGWO

3/4 NPT 10M412B8-SOG 10M612B8-SOG 10M912B8-SOG 10F12483-SOGWO 10F12683-SOGWO 10F12983-SOGWO

1 NPT 10M616B8-SOG 10M916B8-SOG 10F16483-316SOG 10F16683-316SOG 10F16983-316SOG

*The maximum pressure for an adapter coupling is determined by the connection component with the All dimensions for reference only and subject to change.
LOWEST pressure rating; that is, the two end connections and the tubing or pipe used, whichever is For prompt service, Parker Autoclave Engineers stocks select products. Consult your local representative.
LOWER. CAUTION: See appropriate pressure section in reference to proper selection of tubing.

In selecting an adapter involving two different sized connections, the larger connection should be on the
NOTE: All sour oil and gas valves and fittings supplied without collars and glands unless
male end where maximum the mechanical strength of the adapter.
otherwise specified.

NOTE: -OP is one piece adapter.

18 All general terms and conditions of sale, including limitations of our liability, apply to all products and services sold.
Sour Service Products - Severe Service Valve
Pressures to 10,000 psi (690 bar)

Maximum
Valve Working
Size Orifice Rated Pressure
(inches) inches (mm) Cv psi (bar)

1/4 .188 (4.76) .61 10,000 (690)

1/2 .250 (6.35) .78 10,000 (690)
3/4 .375 (9.53) 1.79 7,500 (517)

Operating temperature: -20F to 275F (-29C to 135C)

Parker Autoclave Engineers' severe service valve is designed

for reliable shut-off service with maximum working pressure
to 10,000 psi (690 bar). They are suitable for a wide range of
severe duty applications and comply with NACE MR0175. The
valves unique stem design includes a non-rotation ball point
as well as blow-out protection.

Applications:
All areas where reliable shut-off is required in severe Aluminum Handle

service including abrasive, erosive, corrosive and sour

fluids.
Sampling and blowdown lines. Viton
Dust Seal Bonnet SS
Blow-out preventers
Metal-to-metal
Wireline service equipment Back Seat Stem - 316SS

Chemical processing industry Hytrel Packing Washers

seals Aluminum Bronze

Parker Autoclave Engineers service valves feature: Body - 316SS

Low operating torque
Non-rotating tungsten carbide (ball point) stem
Stem back seat for blow-out prevention Snap Ring
Dust seal prevents stem thread contamination PH 15-7MO
Ball Point
Stem packing adjustment not required Tungsten Carbide
All valves 100% factory tested
Complies with NACE MR0175
Moly lubricated stem threads
Panel mount option available

All general terms and conditions of sale, including limitations of our liability, apply to all products and services sold. 19

End Connection Dimensions - inches (mm)
Catalog Valve Pattern
Number Inlet Outlet A B C D E F G H J
N.P.T. N.P.T.

2-Way Straight
SSV71M4F4 1/4 male 1/4 Female 3.00 1.75 - 1.25 .625 3.25 3.41 0.75 2.50
(76.20) (44.45) - (31.75) (15.88) (82.55) (86.51) (19.05) (63.50)
1/4 Female 1/4 Female 3.00 1.50 - 1.25 0.63 3.25 3.41 0.75 2.50
SSV71F4
(76.20) (38.10) - (31.75) (15.88) (82.55) (86.51) (19.05) (63.50)
1/2 Male 1/2 Female 3.81 2.22 - 1.50 0.75 4.25 4.41 1.00 3.25
SSV71M8F8 See
(96.82) (56.34) - (38.10) (19.05) (107.95) (111.91) (25.40) (82.55)
1/2 Female 1/2 Female 3.81 1.91 - 1.50 0.75 4.25 4.41 1.00 3.25 Figure 1
SSV71F8
(96.82) (48.41) - (38.10) (19.05) (107.95) (111.91) (25.40) (82.55)
3/4 Male 3/4 Female 3.81 2.19 - 1.75 0.88 4.94 5.13 1.00 3.25
SSV71M12F12 (96.82) (55.55) - (44.45) (22.23) (125.40) (130.18) (25.40) (82.55)
3/4 Female 3/4 Female 3.81 1.91 - 1.75 0.88 4.94 5.13 1.00 3.25
SSV71F12
(96.82) (48.41) - (44.45) (22.23) (125.40) (130.18) (25.40) (82.55)

2-Way Angle
SSV72M4F4 1/4 Female 1/4 Male 3.75 1.63 1.16 1.25 0.63 3.25 3.41 0.75 2.50
(95.25) (41.28) (29.36) (31.75) (15.88) (82.55) (86.51) (19.05) (63.50)
1/4 Female 1/4 Female 3.00 1.63 1.16 1.25 0.63 3.25 3.41 0.75 2.50
SSV721F4
(76.20) (41.28) (29.63) (31.75) (15.88) (82.55) (86.51) (19.05) (63.50)
1/2 Female 1/2 Male 4.25 2.03 1.28 1.50 0.75 4.25 4.41 1.00 3.25
SSV72M8F8 See
(107.95) (51.59) (32.54) (38.10) (19.05) (107.95) (111.91) (25.40) (82.55)
1/2 Female 1/2 Female 3.81 2.00 1.28 1.50 0.75 4.25 4.41 1.00 3.25 Figure 2
SSV72F8
(96.82) (50.80) (32.54) (38.10) (19.05) (107.95) (111.91) (25.40) (82.55)
3/4 Female 3/4 Male 4.94 2.75 2.00 1.75 0.88 4.94 5.13 1.00 3.25
SSV72M12F12 (125.40) (69.85) (50.80) (44.45) (22.23) (125.40) (130.18) (25.40) (82.55)
3/4 Female 3/4 Female 4.50 2.75 2.00 1.75 0.88 4.94 5.13 1.00 3.25
SSV72F12
(114.30) (69.85) (50.80) (44.45) (22.23) (125.40) (130.18) (25.40) (82.55)

All dimensions for reference only and subject to change. All general terms and conditions of sale, including limitations of our liability,
For prompt service, Parker Autoclave Engineers stocks select products. apply to all products and service sold.
Consult factory.

Figure 1 Figure 2

G
Open
H
F (Diameter)
Closed

D
(Square)
E

C Inlet
Inlet B
A

2-Way Straight 2-Way Angle

20 All general terms and conditions of sale, including limitations of our liability, apply to all products and services sold.
Sour Service Products - Pressure Gauges
Pressures to 20,000 psi (1379 bar)

Material and Features:

Accuracy within 1.0% of full scale range
Stainless steel case and ring
K-Monel Bourdon tube and socket
M562C male 9/16 tube connection in bottom (API Type III)
Precision stainless steel movement for accuracy and
resistance to atmospheric corrosion.
Pointer zero adjustment located on front of gauge behind
dial cover for convenience.
Gauges can be liquid filled (Add - LF to Catalog #)*
All gauges furnished with SOG collar and gland
Gauges are NACE MR175-2002

Calibrated in PSI Only

Minor
Interval Dial
Catalog Pressure Value Diameter
Number psi (bar) psi (bar) inches (mm)

H-0380 0-5000 (345) 50 (3.45) 4-1/2 (114.30)

H-0336 0-10,000 (690) 100 (6.90) 4-1/2 (114.30)
H-0071 0-15,000 (1034) 100 (6.90) 4-1/2 (114.30)
H-0304 0-20,000 (1379) 200 (13.79) 4-1/2 (114.30)
H-0360 0-30,000 (2068) 500 (34.5) 4-1/2 (114.30)

* Glycerine is standard liquid fill for LF option.

All general terms and conditions of sale, including limitations of our liability, apply to all products and services sold. 21
WARNING
FAILURE, IMPROPER SELECTION OR IMPROPER USE OF THE PRODUCTS AND/OR SYSTEMS DESCRIBED HEREIN OR RELATED ITEMS CAN CAUSE DEATH, PERSONAL INJURY AND PROPERTY DAMAGE.
This document and other information from Parker Hannifin Corporation, its subsidiaries and authorized distributors provide product and/or system options for further investigation by users having technical
expertise. It is important that you analyze all aspects of your application and review the information concerning the product or system in the current product catalog. Due to the variety of operating conditions
and applications for these products or systems, the user, through its own analysis and testing, is solely responsible for making the final selection of the products and systems and assuring that all performance,
safety and warning requirements of the application are met. The products described herein, including without limitation, product features, specifications, designs, availability and pricing, are subject to change by
Parker Hannifin Corporation and its subsidiaries at any time without notice.

Offer of Sale
The items described in this document are available for sale by Parker Hannifin Corporation, its subsidiaries or its authorized distributors. Any sale contract entered by Parker will be governed by the provisions
stated in Parker's standard terms and conditions of sale (copy available upon request).

2013 Parker Hannifin Corporation | Autoclave Engineers is a registered trademark of the Parker Hannifin Corporation 02-0136SE January2013

Caution! Do not mix or interchange parts or tubing with those of

other manufacturers. Doing so is unsafe and will void warranty.

Instrumentation Products Division Parker Hannifin Manufacturing Ltd. Caution! Parker Autoclave Engineers Valves, Fittings and Tools are
not designed to work with common commercial instrument tubing
Autoclave Engineers Operation Instrumentation Products Division, Europe
and will only work with tubing built to Parker Autoclave Engineers
8325 Hessinger Drive Industrial Estate Whitemill
AES Specifications. Failure to do so will void warranty.
Erie, Pennsylvania 16509-4679 USA Wexford, Republic of Ireland
PH: 814-860-5700 FAX: 814-860-5811 PH: 353 53 914 1566
www.autoclave.com FAX: 353 53 914 1582 ISO-9001 Certified
Tools, Installation, Operation
and Maintenance
Safe, efficient operation of any product is inherently
dependent upon its proper installation. In this section the
preparation and assembly of low, medium and high pres-
sure connections is explained. Also covered is the assembly
procedure for medium and high pressure anti-vibration collet
gland assemblies.

Correct installation procedures are further promoted by

providing dimensional information associated with a variety
of Parker Autoclave Engineers tube connections as well as the
torque required to properly seat numerous Parker Autoclave
Engineers components. Several tools developed by Parker
Autoclave Engineers are presented to help accomplish proper
valve, fitting and tubing installation and maintenance.

Tools, Installation, Operation and Maintenance

When installing or maintaining any pressure component,
common practice dictates the use of proper safety equipment
at all times.

All general terms and conditions of sale, including limitations of our liability, apply to all products and services sold.
www.autoclave.com 1
Tools, Installation, Operation and Maintenance - Installation
Parker Autoclave Engineers Speedbite Connections

Fast, Positive Sealing for Pressures up to Complete Connection

15,000 psi* (1034 bar) The illustration below shows the condition of sleeve and
tubing after completion of sleeve seating. The sleeve has
1. Cut tubing to length and deburr. Allow extra length for cut into the tubing as it moved forward into the tapered seat,
proper engagement (per table below). upsetting material ahead of it and establishing a shoulder
on the tubing to provide positive mechanical support for the
Outside Diameter Extra Allowance**
Tube Size for Engagement tubing end-load. A properly seated sleeve cannot be displaced
inches (mm) inches (mm) back and forth along the tubing but may be rotated around the
tubing.
1/16 (1.59) 0.50 (12.70)
1/8 (3.18) 0.50 (12.70)
Reassembly
1/4 (6.35) 0.75 (19.05)
To reassemble a connection, insert tubing with sleeve and
3/8 (9.53) 0.75 (19.05)
gland into valve or fitting. Tighten gland finger-tight. Tighten
1/2 (12.70) 0.88 (22.35) gland with a wrench approximately 3/8 of a turn for a gas-
tight seal. After frequent reassemblies, it may take less than
2. Lubricate male threads. (Lubrication not necessary if tube 3/8 turn to effect a gas-tight seal, and as little as 1/8 of a turn
nut has Bonded Dry-Film Lubricant.) Slip gland and sleeve may be sufficient.
onto tubing.
Note: Be sure to remove gland and sleeve from components
and slide them onto the tubing before inserting the tubing into
SpeedBite
the components. Make sure larger end of sleeve is toward "SW" and "W" Style
gland. Push tubing into valve or fitting until it bottoms. If
process tolerable, a slight amount of inert grease on the nose
of the compression sleeve will improve sealability.

3. TIGHTEN GLAND UNTIL SLEEVE BEGINS TO GRIP

TUBING.

4. Note starting position of wrench. Tighten gland approxi-

mately 1-1/4 turns for the SW and 1/8" W connection. For 1/4" Gland
See Note **
and 1/2" W connections tighten glands approximately 1 turn. Larger end of sleeve
toward gland

Step 1 Step 2
Fitting Bite into tubing
exaggerated for clarity

* No special torque wrenches or mandrels required.

** Distance tubing protrudes into connection from face of
fitting.
Fully annealed tubing with proper outside diameter tolerences
is recommended for these connection components.

Step 3 Step 4

2 All general terms and conditions of sale, including limitations of our liability, apply to all products and services sold.
Tools, Installation, Operation and Maintenance - Manual Coning & Threading Tools
Manual Coning & Threading Tools

Parker Autoclave Engineers manufactures a manual coning appropriate die for any of the standard Parker Autoclave
and threading tool for optimum performance with tubing sizes Engineers tubing sizes through 9/16 (14.3 mm) outside
up to 9/16 (14.3 mm) outside diameter. These precision diameter. Interchangeable guide bushings properly guide the
quality manual tools permit on-site end preparation for Parker tool for accurate thread cutting.
Autoclave Engineers medium and high pressure tubing instal-
lations. One coning and one threading tool with optional sizes
of collets, blades dies and guide bushings eliminates the need
of multiple tools for different size tubing.

Interchangeable collets for each size tubing provides proper Coning Tool
centering of tubing. The cutting feed arrangement permits the
operator to control the length of the cut. Interchangeable tool
steel cutting blades are used in pairs to assure more accurate
and faster coning, and are designed to square-off and finish Cutter Support
the tube as the cone is completed. There is a provision for ap-
plying metal cutting lubricants to the cutting zone. Feed Nut

For coning tool with optional support arm

Coning Tool Threading Tool
(for holding in vise) and chip/oil catch Housing
reservoir, add RS to suffix of model
number. Example: MCTM4-RS Collet Nut
For threading operations the thread- Note: Collet nut wrench (not shown) supplied with coning tool.
ing die holder is designed to hold the

Tube Size Coning Tools and Components Catalog Number Threading Tools and Components Catalog Number

Tool Tool
Outside Inside Coning with Threading Die
Diameter with Guide
Diameter Blades Die & Tool
in.(mm) Collet & Bushing
in.(mm) Collet (set of 2) Bushing Only Order No. Size-type*
Blades
Parker AE Medium Pressure

1/4 (6.35) .109 (2.77) MCTM4 90248 101F-1577 402A 402 P-0214 1/4-28 1010-0343

3/8 (9.53) .203 (5.16) MCTM6 90250 101F-1601 402C 402 P-0215 3/8-24 1010-0344

9/16 (14.3) .312 (7.92) MCTM920 90251 1010-5218 402E 402 P-0216 9/16-18 1010-0345

9/16 (14.3) .359 (9.12) MCTM910 90251 101A-1897 402E 402 P-0216 9/16-18 1010-0345

1/4 (6.35) .083 (2.11) MCTH4 90248 101F-3939 402A 402 P-0214 1/4-28 1010-0343
Parker AE High Pressure

5/16 (7.92) .062 (1.57) MCTH5 90249 101F-3939 402B 402 P-0205 5/16-24 1030-0343

3/8 (9.53) .125 (3.18) MCTH6 90250 101F-1578 402C 402 P-0215 3/8-24 1010-0344

9/16 (14.3) .188 (4.78) MCTH960 90251 1010-0883 402E 402 P-0216 9/16-18 1010-0345

=9/16 (14.3) .250 (6.35) MCTH940 90251 101C-7214 402E 402 P-0216 9/16-18 1010-0345

Options: Cutting Oil: P-8784 MCT-SA: Support Arm Assembly

90286: Instructions MCT-RES: Reservoir Assembly

* All threads for Parker AE medium pressure and high pressure tubing are LH national fine (class 2). = 9/16 (14.3) x .312 (7.92) ID 40,000 psi (2758 bar), use MCTM920.
Note: Manual coning and threading tools for 3/4" (19.1 mm) and 1" (25.4 mm) outside diameter medium pressure tubing are not available. Model AEGCTM-2 Power Coning-and-
Threading Machine is recommended for this tubing. A minimum of 3" (76 mm) straight length is required to perform coning and threading operation with manual coning tool.

All general terms and conditions of sale, including limitations of our liability, apply to all products and services sold. 3
Tools, Installation, Operation and Maintenance - Coning, Coning & Threading Kits
Coning and Coning and Threading Tool Kits
Parker Autoclave Engineers offers coning kits as well as con-
ing and threading tool kits. Each kit consists of the required
tools, and other items necessary for your coning or coning
and threading needs. All kit items are placed in a hand-carry
tool case with top tray. The coning tools supplied in the tool
kits come complete with the vise stand and chip/oil reservoir
standard. The following is a list of items included in each kit.

Included with all kits: Coning tool assembly, three collets, col-
let nut wrench, three sets of coning blades, tool box with tray,
de-burring tool, one quart of cutting oil, 3/32 Allen wrench,
four spare set screws, and laminated instruction sheet.

Coning Kit:
Medium pressure kit
KMCT-M Coning tool with vise stand and reservoir
1/4, 3/8 and 9/16 collets
1/4, 3/8 and 9/16 blades
(9/16 blades for 20,000 psi tubing only)

High pressure kit

KMCT-H Coning tool with vise stand and reservoir
1/4, 3/8 and 9/16 collets
1/4, 3/8 and 9/16 blades
(5/16 collets not included)
(9/16 blades for 60,000 psi tubing only)

Coning and Threading Kit:

Medium pressure kit

KMCT-MT Coning tool with vise stand and reservoir
1/4, 3/8 and 9/16 collets
1/4, 3/8 and 9/16 blades
(9/16 blades for 20,000 psi tubing only)
Threading tool
1/4, 3/8 and 9/16 guide bushing
1/4, 3/8 and 9/16 dies

High pressure kit

KMCT-HT Coning tool with vise stand and reservoir
1/4, 3/8 and 9/16 collets
1/4, 3/8 and 9/16 blades
(5/16 collets not included)
(9/16 blades for 60,000 psi tubing only)
Threading tool
1/4, 3/8 and 9/16 guide bushing
1/4, 3/8 and 9/16 dies Note: Additional blades available for other sizes of tubing. See manual
coning and threading tool on page 3 for sizes and part numbers.

4 All general terms and conditions of sale, including limitations of our liability, apply to all products and services sold.
Tools, Installation, Operation and Maintenance - Coning & Threading Installation
Coning and Threading Installation
Manual Kit: 3. Fig. 2 Place the coning tool housing
Fig. 2
1. Fig. 1 Cut tubing to length and Fig. 1 (or optional support arm), without the
square off the end as close to the feed nut/cutter support assembly, in a
required length as possible. Allow extra vise. The vise should be equipped with
length for proper engagement into soft jaws, and the housing should be
the connection as listed in Table 1. A placed in the vise to allow lubricant to
small amount of extra length should flow to the cutters and cone.
be allowed to finish the end of the
tube, but excessive amounts require 4. Fig. 2 Slide the tubing through the
additional cutting time and premature collet until the end of the tube appears
blade wear. Note: When cutting tubing in the coning tool housing window. Line
with abrasive cut off wheel, tubing the end of the tube with the edge of the
should not be over heated effecting window and tighten the collet nut firmly in place using the collet nut wrench
material properties. (see Table 2).

2. Install the collet and collet nut into the bottom of the coning tool housing. 5. Fig. 3 Install the feed nut/cutter support assembly into the coning tool
Remove the cutter support feed nut from the coning tool housing and install housing. Rotate the feed nut clockwise until the top of the cutters just contact
the cutters. This can be done by backing out the four set screws in the cutter the top of the tube. Do not rotate the
Fig. 3
support. Note: When installing new blades, be sure the blades are flat against feed nut any further at this point.
the holder. There should be no space between the blades and the holder. 6. Fig. 3 Apply cutting oil through
the lubricant opening in the end of the
cutter holder or directly through the
Tube Connection Extra Allowance**
for Engagement housing window. A medium weight
Size Type high sulphur content cutting fluid is
inches (mm)
1/4 SF250CX 0.55 (13.97) recommended. Use the cutting oil
3/8 SF375CX 0.69 (17.53) freely during the coning operation.
Pressure
Medium

9/16 SF562CX 0.84 (21.34)

7. a. The distance the feed nut travels
TABLE 1

3/4 SF750CX 1.00 (25.4)

from it's start position can be used to
1 SF1000CX 1.44 (36.6)
gauge the amount of travel to properly cone the tube. The amount of travel is
1-1/2" SF1500CX 1.875" (47.63)
shown in Table 2 and is labeled Cone Length.
1/4 F250C 0.50 (12.70)
5/16 F312C150 1.25 (31.75) b. Another method to determine proper cone length is to count the number
Pressure

3/8 F375C 0.69 (17.53) of turns of the feed nut. The number of turns is listed in Table 2 under the
High

9/16 F562C 0.84 (21.34) heading Number of Turns. This includes enough advancement of the feed
9/16 F562C40 0.81 (20.57) nut to face off the tube. This assumes the tube is cut to length in accordance
1 F1000C-43 1.62 (41.1) with these instructions. The feed nut is supplied with a position indicator
** See Note on page 2. (drilled hole) to help determine the number of turns.
8. Rotate the handle in a clockwise direction while simultaneously slowly
turning the feed nut in a clockwise direction. Rotate the feed nut slowly and
evenly to smoothly cone the tube. Loosen collet nut, remove tubing and
visually inspect the cone. Use deburring tool to remove any burr on inside
WINDOW
edge of tube after coning.
CUTTER SUPPORT POSTION Fig. 4
HOUSING INDICATOR HANDLE
COLLET NUT SET SCREWS

Manual Threading:
COLLET
9. Fig. 4 Clamp the tubing in a soft
jaw vise. Do not over tighten. Slide the
TABLE 2

CUTTER
CUTTER SUPPORT
FEED NUT
threading tool over the tube through
Insert Tube to here
the guide bushing.
Medium Pressure Tubing High Pressure Tubing
10. Apply a medium weight, high
Cone Length No. of Tube O.D. Cone Length No. of
inches (mm) Turns (inches) inches (mm) Turns sulphur cutting oil to threading area.
1/4 0.11 (2.79) 2 1/4 0.13 (3.30) 3
3/8 0.13 (3.30) 3-1/2 5/16 0.19 (4.83) 3-1/2 Insert tube Guide
3/8 0.16 (4.06) 3 from this Bushing
9/16(CX-20) 0.16 (4.06) 3 direction
9/16 0.28 (7.11) 5-1/2
9/16(CX-10) 0.13 (3.30) 2-1/2 9/16(C40) 0.21 (5.33) 4-1/2
Manual coning and threading tools are not available for 3/4 and 1 tubing,
see page 13 Coning and Threading Machine.

All dimensions for reference only and subject to change.

All general terms and conditions of sale, including limitations of our liability, apply to all products and services sold. 5
11. Apply pressure to the top of Approximate Number of Turns to Thread Tubing
the threading tool to start the
cutting action. The threads are Male Connection Number of Turns
left handed, so turn the threader
counterclockwise to thread the 59 SM250CX20 6-1/2
tube. The threading tool may need +0 D SM375CX20 7-1/2
to be periodically rotated clockwise -2 SM562CX20 6
to break and discharge metal chips.
SM562CX10 6-3/4
Apply lubricant freely during the L
threading process. Note: The lead M250C 12
in chamfer (larger chamfer) on the M312C150 12
die flutes toward guide bushing. M375C 14
12. Continue to rotate die holder counterclockwise while applying cutting oil M562C 12
generously throughout the process until threads of the following lengths have M562C40 13
been cut.
13. After tube is coned, threaded and deburred, check for proper thread fit and
Assembly and Makeup of Connection
length with a new collar of the proper size. Note: Rememebr to flush all tubing
prior to installation with a fluid that is compatiable with the process fluid being used. 1. Lubricate male threads of gland with a metal based thread
lubricant.= Slip gland on tubing as shown and thread collar on
Male Tube Size Dimensions Thread size*
tubing until one to two threads are exposed between collar and
inches (mm)
Connection Outside
Diameter
X
Inside
Diameter
and type cone.
Type D L (max)
(inches)
inches (mm)
SM250CX20 1/4 x 0.109 0.141 0.344 1/4 - 28 2. A small amount of process tolerable lubricant, such as
(6.35 x 2.77) (3.58) (8.74)
silicone grease, on the cone tip will help with the sealing
SM375CX20 3/8 x 0.203 0.25 0.438 3/8 - 24 process. Insert tubing in connection, engage gland and tighten
(9.53 x 5.16) (6.35) (11.13)
fingertight.
SM562CX20 9/16 x 0.312 0.406 0.500 9/16 - 18
(14.29 x 7.92) (10.31) (12.70)
3. Tighten gland with torque wrench to specified values on
SM562CX10 9/16 x 0.359 0.438 0.500 9/16 - 18
(14.29 x 9.12) (11.13) (12.70)
page 13. When tightening, the use of an additional wrench is
recommended to hold the fitting.
SM750CX20 3/4 x 0.438 0.562 0.625 3/4 - 16
(19.05 x 11.13) (14.27) (15.88)
= Copper Anti-Seize Lubricant:
SM750CX10 3/4 x 0.516 0.578 0.625 3/4 - 16
(19.05 x 13.11) (14.68) (15.88) P-3580 (1 pound can)
SM1000CX20 1 x 0.562 0.719 0.781 1 - 14 P-3580-8 (1/2 pound can)
(25.4 x 14.27) (18.26) (19.84)
Moly Anti-Seize Lubricant:
SM1000CX10 1 x 0.688 0.812 0.781 1 - 14 P-9766 (1 pound can)
TABLE 3

(25.4 x 17.48) (20.62) (19.84)

SM1500CX 1-1/2" x 0.937 1.062 1.000 1-1/2" - 12
(38.10 x 23.78) (26.97) (25.40)
M250C 1/4 x 0.083 0.125 0.562 1/4 - 28
(6.35 x 2.10) (3.18) (14.27)
M250C100 1/4" x 0.083 0.125 0.625 1/4" - 28
(see note) (6.35 x 2.10) (3.18) (15.88)
M312C150 5/16 x 0.062 0.125 0.687 5/16 - 24
(7.94 x 1.57) (3.18) (17.45)
Step 1, 2
M375C100 3/8" X 0.125 0.219 0.562 3/8" - 24
(see note) (9.53 x 3.18) (5.56) (14.27)
M375C 3/8 x 0.125 0.219 0.75 3/8 - 24
(9.53 x 3.18) (5.56) (19.05)
M562C 9/16 x 0.187 0.281 0.938 9/16 - 18
(14.29 x 4.78) (7.14) (23.83)
M562C40 9/16 x 0.250 0.312 0.938 9/16 - 18
(14.29 x 6.35) (7.92) (23.83)
M562C40-312 9/16 x .312 0.406 0.940 9/16" - 18
(14.29 x 7.92) 10.31 23.88
M1000C43 1 x 0.438 0.562 0.91 1 - 14
(25.4 x 11.13) (14.27) (23.11)

*Thread is left-hand national fine (Class 2). All dimensions for reference only
and subject to change. Completed Autoclave Engineers Completed Autoclave Engineers
Medium Pressure Connection. High Pressure Connection.
NOTE: M250C100 and M375C100 used in F312C150 connection at 100,000
psi (6895 bar).

6 All general terms and conditions of sale, including limitations of our liability, apply to all products and services sold.
Tools, Installation, Operation and Maintenance - QSS Assembly Procedure
QSS Assembly Procedure

Fast, Positive Sealing for Pressures up to Torque values can be used for both initial setting and reas-
15,000 psi (1034 bar) sembly connections. See the following page for reassembly
1/4 & 3/8 Tubing Size (Standard setting operation) values and ranges.
See next page for setting with hydraulic tool. Initial setting torque
(Setting with hydraulic tool is recommended but not required). ft-lbs (NM)
1/4 40 (54.3)
1. Cut tubing to length and deburr. Allow extra length for
3/8 80 (108.5)
proper engagement (per table below).
Outside Diameter Extra Allowance** Completed Connection
Tube Size for Engagement
inches (mm) inches (mm) The illustration below shows the condition of sleeve and tub-
ing after completion of sleeve setting. The sleeve has cut
1/4 (6.35) 0.75 (19.05)
into the tubing as it moved forward into the tapered seat, up-
3/8 (9.53) 0.81 (20.64) setting material ahead of it and establishing a shoulder on the
2. Slip gland and sleeve onto tubing. tubing to provide positive mechanical support for the tubing
end-load. A properly set sleeve cannot be displaced back and
Note: Be sure to remove gland and sleeve from components forth along the tubing but may be rotated around the tubing.
and slide them onto the tubing before inserting the tubing into
the components.
Make sure larger end of sleeve is toward gland.
Push tubing into valve or fitting until it bottoms. Lubricate
gland nut threads to aid in assembly. If process tolerable, a
slight amount of inert grease on the nose of the compression
sleeve is recommended to improve sealability.

3. TIGHTEN GLAND NUT UNTIL SLEEVE BEGINS TO GRIP

TUBING.
Gland
4. Note starting position of wrench. Tighten gland nut See Note **
Larger end of sleeve
1-1/4 turns to complete the QSS connection.* toward gland

Bite into tubing

Fitting exaggerated for clarity
Step 1 Step 2
Reassembly
To reassemble a 1/4 or 3/8 connection, insert tubing with
sleeve and gland nut into valve or fitting. Tighten gland nut
until the sleeve begins to grip tubing. Tighten gland with a
wrench 1/4 of a turn for a gas-tight seal. After frequent reas-
semblies, it may take less than 1/4 turn to affect a gas-tight
seal and as little as 1/8 of a turn may be sufficient.

* No special torque wrenches or mandrels required.

** Distance tubing protrudes into connection from face
Step 3 Step 4
of fitting.

A small blind hole on the face of the gland is provided for a
starting position reference.
Parker Autoclave Engineers Medium Pressure tubing is r
equired for these connection components.
When assembling tubing into fittings such as in rack systems,
alignment of tubing is critical in connection make up.
Do not force tubing into alignment with connections as bend-
ing stress will effect the sealing capability of the connections.
All general terms and conditions of sale, including limitations of our liability, apply to all products and services sold. 7
Tools, Installation, Operation and Maintenance - QSS Assembly Procedure
QSS Assembly Procedure
Fast, Positive Sealing for Pressures up to Step 1 Step 2
15,000 psi (1034 bar)
Hydraulic Set Tool Assembly
1. Cut tubing to length and deburr. Allow extra length for proper
engagement (per table below).
Outside Diameter Tube Size Extra Allowance for Engagement**
inches (mm) inches (mm)
1/4 (6.35) 0.75 (19.05)
3/8 (9.53) 0.81 (20.64)
9/16 (14.27) 1.25 (31.75) Step 2A-1 Step 2A-2
3/4 (19.04) 1.63 (41.28)
1 (25.40) 1.75 (44.45)

2. Slip gland nut and sleeve onto tubing. Lubricate the nose of
the compression sleeve or the tapered die surface with a metal to
metal lubricant. We recommend Jetlube MP-50. Make sure larger
end of sleeve is toward gland nut. Push tubing into hydraulic set
tool until it bottoms into the setting die. For the 1" size only, as- Step 3 Step 4
semble the split nut (2A-1) around the tubing between the sleeve
and gland with the larger counter bore towards the gland and
thread into the cap. Be sure both the split nut and cap have been
tightened down and neither can be moved by hand. The cap
should always be flush with the top of the housing (2A-2) while
the split nut will not. Skip step 3.
3. Thread gland nut into cap until the hex touches the top surface.
4. Pressurize cylinder up to the set pressure (per table below.)
DO NOT EXCEED THE SET PRESSURE. Step 5 Step 6
AS WITH ALL HIGH PRESSURE EQUIPMENT, USE CAUTION
DURING OPERATION. SET TOOL MAWP IS 10,000 PSI (690 BAR).
Outside Diameter Tube Size Set Pressure for Full Tubing Bite
inches (mm) psi (bar)
1/4 (6.35) 3/8 (9.53) 9/16 (14.27) 4500 (310) to 5000 (344)
3/4 (19.04) 8000 (552) to 10000 (690)
1 (25.4) 9000 (620) to 9500 (655)

Vent all presssure from hydraulic cylinder. Remove gland assembly

from preset tool and inspect biting end of sleeve. Looking inside Completed Connection
the biting end of the sleeve you should see a shoulder pushed up The hydraulically set sleeve has cut into the tubing as it moved
from the tubing material. A properly set sleeve must spin freely to forward into the tapered seat, upsetting material ahead of it and
achieve a seal. If the sleeve is seized in place after setting, discard establishing a shoulder on the tubing to provide positive mechan-
and make another. Do not set a sleeve more than once. ical support for the tubing end-load. A properly set sleeve cannot
5. Install gland assembly into valve/fitting. If process tolerable, be displaced back and forth along the tubing but may be rotated
a slight amount of inert grease on the nose of the compression around the tubing.
sleeve should be used to aid sealing. Lubrication of gland threads Reassembly
will also aid in assembly. To reassemble a connection, insert tubing with sleeve and gland
TIGHTEN GLAND NUT UNTIL SLEEVE BEGINS TO GRIP TUBING. nut into valve or fitting. Install gland into valve/fitting.
6. Note starting position of wrench. Tighten gland nut 1/4 turn TIGHTEN GLAND NUT UNTIL SLEEVE BEGINS TO GRIP TUBING.
to complete the QSS connection. Since the mechanical bite has Note starting position of wrench. Tighten gland nut 1/4 turn
already been completed with the hydraulic set tool, it is permis- to complete the QSS connection.
sible to vary the torque to achieve sealing.
If torque values are required, use the following: ** Distance tubing protrudes into connection from face of fitting.

A small blind hole on the face of the gland is provided for a start-
Size Required Torque Max. Torque Torque Wrench Adapter
(in) ft-lbs (Nm) ft-lbs (Nm) Adapter Size Part # ing position reference.
1/4 30 (40.7) 50 (67.8) 5/8 P-1683 Parker Autoclave Engineers Medium Pressure tubing is required
3/8 35 (47.5) 75 (101.6) 3/4 P-9813 for these connection components.
9/16 90 (122.0) 135 (183.0) 1-3/16 P-1689 When assembling tubing into fittings such as in rack systems,
3/4 175 (237.3) 250 (339.0) 1-1/2 P-6040 alignment of tubing is critical in connection make up. Do not force into
1 375 (508.4) 500 (677.9) 1-3/4 91269 alignment with connections as bending stress will effect the sealing
8 All general terms and conditions of sale, including limitationscapability of the
of our liability, connections.
apply to all products and services sold.
Tools, Installation, Operation and Maintenance - Hydraulic Sleeve Set Tool
Hydraulic Sleeve Set Tool

The Parker Autoclave Engineers hydraulic sleeve set tool Tooling Installation and Changing Sizes
is designed for use with the QS Series glands, sleeves and To change tooling to another size only requires interchanging
Autoclave tubing. This tool is required to set the sleeve for 2 parts.
the 9/16 and 3/4 sizes and suggested for the 1/4 and 3/8
sizes. It not only produces the required bite into the tubing, it 1. Loosen the 5/16" set screw that locks the threaded cap from
is much easier than trying to set the sleeve the conventional rotating.
method. The tool comes in a self contained portable, lockable 2. Using a 5/32" hex key to rotate and remove the threaded
case complete with hand or air pump, cap and dies for all steel cap from the aluminum housing.
sizes. 3. Turn the tool assembly upside down to remove the die
from inside the housing.
4. Install the die of the appropriate connection size you wish
to use. The solid side of the die should be facing down
towards the hydraulic cylinder.
5. Install the appropriate size cap to match the size of the die.
Insert cap with the 5/32" hex up. Rotate with a 5/32" hex key
until it bottoms out on the shoulder side of the housing.
6. Thread in the 5/16" set screw until it bottoms out on the
cap threads. Tighten set screw to prevent movement
during use.

Ordering Information
HST-912: Complete tool kit with hand pump (shown in photo)
HST-912TW: Complete tool kit with torque wrench and adapters
Features HST-912A: Complete tool kit with air-operated pump (Air
Case Dimensions: 28W x 14.25H x 13.75D (711cm x operated pump #P-1948)
362cm x 292cm) HST-912ATW: Complete tool kit with torque wrench and adapters
Total Weight: 69 lbs. (31 Kg) HST-S: Complete table mounted system that includes everything in
Hand Pump: Single stage hydraulic (standard) the HST-912ATW plus the required tooling for the 1" size connections.
Hydraulic Cylinder: 10,000 psi, 2.5 25 ton Not shown. Consult factory for replacement parts.
Base & Housing: Aluminum anodized
Die and Cap: Precision hardened steel Description Part #
Gauge: 15,000 psi (1034 bar) Hydraulic Cylinder 90588
Air-operated hydraulic pump option can be furnished in Gauge 90594
place of standard hand pump. (Add -A to order number). Adapter 90593
Operating pressure 0 to 10,000 psi (0 to 690 bar). Base 101F-3407
Required air presssure, 30 psi (2.1 bar) minimum 120 Housing 101F-3408
psi (8.3 bar) maximum. Reservoir capacity: 24 cu. in. Hydraulic Pump P-1893
(393cm3). Air lubricator/air separator is recommended for Hose P-1894
air operated units. 3/4 Die HSTD12
9/16 Die HSTD9
Cap 3/4 Cap HSTC12
Die 9/16 Cap HSTC9
Tool Chest P-10011
Housing
Moly Paste P-9766
1/4 Die HSTD4
1/4 Cap HSTC4
3/8 Die HSTD6
3/8 Cap HSTC6
Hydraulic
Cylinder (TW) Kits with torque and adapters
Hose Connection
3/8 NPT 20 to 150 ft-lbs (27-203 Nm) Torque Wrench P-1680
75 to 250 ft-lbs (102-339 Nm) Torque Wrench 91020
5/8 wrench adapter P-1683
Base
3/4 wrench adapter P-9813
1-3/16 wrench adapter P-1689
1-1/2 wrench adapter P-6040

All general terms and conditions of sale, including limitations of our liability, apply to all products and services sold. 9
Tools, Installation, Operation and Maintenance - Anti-Vibration Collet Gland
Anti-Vibration Collet Gland

Assembly Procedure
Anti-vibration collet gland assembly replaces the standard Collet
gland nut. Collet
Medium pressure Gland
1. Cone and thread tubing as defined on pages 5 and 6.
Series KCBGLX
2. Slide collet assembly onto tube and install collar as de- 20,000 psi (1379 bar) Collet
scribed in the assembly and makeup of connections on page Body
6. One or two threads should be exposed between the collar (Gland)
and cone.

3. Lubricate male threads on glands (medium pressure

anti-vibration assemblies supplied with a baked on dry film Collet
lubricant. Lubrication not required.)
Gland
4. Tighten gland or collet body to specified torque on
page 13. The high pressure collet will grip the tube when the
High pressure
connection gland is tightened.
Series KCGL
5. For the medium pressure collet gland assembly, hand tighten 60,000 psi (4137 bar)
the collet gland in place and further tighten 1-1/4 turns with a
wrench. When tightening the medium pressure anti-vibe
collet nut, hold the collet body with a wrench to prevent the body Note: Always use a back-up wrench on collet body to prevent
from turning and over tightening. This will lock the collet against over tightening of collet body into connection.
the tube. For subsequent retightening of the medium pressure
anti-vibration collet gland, use 3/4 turns past finger tight.

Reseating tool - For female tubing connection cone seat

1. Clamp fitting in soft-jawed vise. 5. Remove reamer, guide nut and bushing and inspect cone
seat.
2. Thread gland nut into connection and tighten to 10 ft. lbs.
(13.6 N.m). 6. Repeat steps 2,3,4 and 5, if necessary, until cone surface
has been restored and finish is smooth.
3. Apply a medium weight high sulfur cutting oil generously
through opening in nut. Cutting oil P-8784. 7. Clean fitting thoroughly to remove all chips and residue.

4. Insert reamer through guide bushing and press down firmly

while rotating clockwise approximately two full turns, relieving
pressure gradually toward end of second turn.

Connection Reamer Guide Reamer Handle

Type Complete Nut Assembly
SF250CX P-0270CX A101A-2005 P-0270 202D-0596
SF375CX P-0271CX A2020-7310 P-0271 202D-0596
SF562CX P-0272CX A2030-7310 P-0896 202D-0596
Guide Handle SF750CX P-1726CX A102A-3376 P-1726 201D-0595
Nut Assembly SF1000CX P-1727CX A102A-3375 P-1727 201D-0595
F250C P-0270C A1010-0453 P-0270 202D-0596
F312C150 P-0271C150 A2040-7310 P-0271 202D-0596
Reamer F375C P-0271C A1020-0453 P-0271 202D-0596
F562C / C40 P-0272C A1030-0453 P-0272 202D-0596
43F1000C P-1727CX A102A-3375 P-1727 201D-0595

10 All general terms and conditions of sale, including limitations of our liability, apply to all products and services sold.
Coning and Threading Machine

Benefits
Coning and Threading of Parker Autoclave Engineers
Medium and High Pressure Tubing.

Separate heads for coning and threading are powered by a

single motor and drive system.

New design collet / support system allows for easier coning

and threading of long tube lengths.

New design tube depth gauge eliminates movement of

tubing during the threading operation.
Features
1/2-HP TEFC motor, capacitor start
Pop-Open die prevents thread damage; no reversing
necessary on threading
Complete tooling available; order separately
Supplied with oil pump and reservoir
Optional oil reservoir heater for operation below
65 F (18.3C)
CE marked on 220 VAC units standard
Tube Size Collet Cutters Die Complete
Unit mounted on stand with locking casters for ease of Inches Only Only Chasers Set
mobility and stability (mm) (set) (set) (set)
Guard option - see next page 1/4 x 0.109 CTM4C-2 CTM4BX AEGCTM4D AEGCTM4X-2
(6.35 x 2.77)
Ordering Procedure
1/4 x 0.083 CTM4C-2 CTM4B AEGCTM4D AEGCTM4-2
(Tooling must be ordered separately see Table). (6.35 x 2.10)

Model Description 5/16 x 0.062 CTM5C-2 CTM5B AEGCTM5D AEGCTM5-2

(7.94 x 1.57)
AEGCTM-2 115 VAC 60Hz
3/8 x 0.203 CTM6C-2 CTM6BX AEGCTM6D AEGCTM6X-2
AEGCTM-2E-CE 220 VAC 50Hz (9.53 x 5.16)
AEGCTM-2WOH Standard units "with oil heater" 3/8 x 0.125 CTM6C-2 CTM6B AEGCTM6D AEGCTM6-2
(9.53 x 3.18)
AEGCTM-2EWOH-CE
9/16 x 0.359 CTM9C-2 CTM9BXX AEGCTM9D AEGCTM9XX-2
(14.29 x 9.12)
Approximate Dimensions:
56h x 28w x 20d (142cm x 71cm x 51cm) 9/16 x 0.312 CTM9C-2 CTM9BX AEGCTM9D AEGCTM9X-2
(14.29 x 7.92)
9/16 x 0.187 CTM9C-2 CTM9B AEGCTM9D AEGCTM9-2
Shipping Weight:
(14.29 x 4.78)
350 pounds (158.7 Kg)
9/16 x 0.250 CTM9C-2 CTM9B40 AEGCTM9D AEGCTM940-2
(14.29 x 6.35)
Cutting Oil:
3/4 x 0.516 CTM12C-2 CTM12BX AEGCTM12D AEGCTM12X-2
Part number: P-8699: 3-1/2 Gal (11.36 Liter) Reservoir (19.05 x 13.11)
Capacity
3/4 x 0.438 CTM12C-2 CTM12B AEGCTM12D AEGCTM12-2
(19.05 x 11.13)
Note 1: 1 x 0.688 CTM16C-2 CTM16BX AEGCTM16D AEGCTM16X-2
A minimum of 5 (127mm) straight length of tubing is (25.4 x 17.48)
required to perform coning & threading operations. 1 x 0.562 CTM16C-2 CTM16B AEGCTM16D AEGCTM16-2
(25.4 x 14.27)
Video Aids Available: 1 x 0.438 CTM16C-2 CTM16BXX AEGCTM16D AEGCTM16XX-2
Coning & Threading CD P-9930-D (25.4 x 11.13)

All general terms and conditions of sale, including limitations of our liability, apply to all products and services sold. 11
Coning and Threading Machine

Optional Oil/Chip Guard

A threading die oil/chip guard is available as an option on our

AEGCTM machines.

The guard is a swing away Plexiglas design providing

protection from splashing oil or thrown chips while allowing
full access to the die head. The guards sole purpose is
the prevention of flying chips and oil not the prevention of
operator access.

A guard option will also be available in a retrofit kit for our

new existing machines (-2 models). The kit will contain all
required items along with instructions.

To order a guard with a model, just add a G to the catalog

number.

AEGCTM-2G
AEGCTM-2E-CEG
AEGCTM-2GK Retrofit kit catalog number
Note: Detailed operational instructions are supplied with the
machine in two forms, printed and DVD. Refer to these instruc-
tions for tooling installation, machine adjustment, and maintenance
instructions.

12 All general terms and conditions of sale, including limitations of our liability, apply to all products and services sold.
Torque Values

Autoclave Micrometer Adjustable Valve Stem Maximum Running and Seating

Torque Wrenches Torques* (Typical Values)
P-1680 20 to 150 ft. lbs. (27 to 203 Nm)
Valve Tube Size Running Seating Pressure
91020 75 to 250 ft. lbs. (102 to 339 Nm) Series (Inches) Torque Torque psi (bar)
Accurate tightening for all Parker Autoclave Engineers valve in.-lbs. (N.m) in.-lbs. (N.m)
packing glands and tube nuts is essential. The wrench can be 1/8 25 (2.80) 35 (3.90) 15,000 (1034)
adjusted to the ranges shown above and is used with inter- 1/4 40 (4.50) 50 (5.60) 15,000 (1034)
changeable wrench adapters for hex sizes from 1/2 through 10V
3/8 40 (4.50) 50 (5.60) 15,000 (1034)
1-7/8. Part numbers for wrench adapters are listed below. 1/2 60 (6.80) 80 (9.10) 10,000 (690)
Wrench adapters sold separately. 1/4 25 (2.80) 35 (3.90) 15,000 (1034)
Standard Wrench Adapters SW 3/8 40 (4.50) 50 (5.60) 15,000 (1034)
1/2 70 (7.90) 90 (10.20) 10,000 (690)
Packing Gland
Wrench or 9/16 60 (6.80) 80 (9.10) 10,000 (690)
Adapter Tube Nut 10SM 3/4 210(23.80) 240 (27.20) 10,000 (690)
Hex Size 1 180 (20.40) 540 (61.10) 10,000 (690)
Number (inches)
1/4 40 (4.50) 55 (6.20) 20,000 (1379)
P-1681 1/2 3/8 40 (4.50) 55 (6.20) 20,000 (1379)
P-1682 9/16 20SM 9/16 60 (6.80) 90 (10.20) 20,000 (1379)
P-1683 5/8 3/4 300 (33.90) 360 (40.70) 20,000 (1379)
P-9813 3/4 1 360 (40.70) 600 (67.90) 20,000 (1379)
P-1685 13/16 30SC 1 360 (40.70) 1000 (113.0) 30,000 (2068)
P-1686 7/8 43SC 1 720 (82.0) 840 (95.0) 43,000 (2965)
P-1687 15/16 1/4 40 (4.50) 55 (6.20) 30,000 (2068)
P-9901 1 30VM 3/8 45 (5.00) 55 (6.20) 30,000 (2068)
P-1688 1-1/16 9/16 50 (5.60) 55 (6.20) 30,000 (2068)
P-1689 1-3/16 40VM 9/16 40 (4.50) 55 (6.20) 40,000 (2758)
P-1690 1-3/8 1/4 65 (7.30) 70 (7.90) 60,000 (4137)
P-6040 1-1/2 60VM 3/8 65 (7.30) 70 (7.90) 60,000 (4137)
P-10076 1-7/8 9/16 65 (7.30) 70 (7.90) 60,000 (4137)
Parker AE Tube Connection Glands 100VM 5/16 100 (11.3) 120 (13.6) 100,000 (6895)

Tube Connection Tube Nut Required Required

Size Hex Size Torque Torque
(Inches) (Inches) ft.-lbs. (N.m) Moly Coated * These are not specifications.
1/4 1/2 20 (27.1) 15 (20.4) Note: All valve stem torques are based on standard PTFE packing. For valves
Medium Pressure

with option TG (PTFE Glass) or GY (graphite - yarn packing), the following

3/8 5/8 30 (40.6) 20 (27.1)
equations should be used to estimate torques.
9/16 15/16 55 (74.5) 40 (54.4) Running Torque GY = 2 x running torque
3/4 1-3/16 90 (122.0) 70 (95.2) Seating Torque GY = 2 x running torque + seating torque - running torque
Running Torque TG = 1.1 x running torque
1 1-3/8 125 (170) 100 (136.0) Seating Torque TG = 1.1 x running torque + seating torque - running torque
1-1/2 1-7/8 200 (271.2) 160 (217.0)
1/4 5/8 25 (33.9) Parker AE Flat Top/Bottom Adapters
1/4 (100K) 3/4 50 (68) Maximum
Size Working Connection Required Torque
3/8 13/16 50 (68) inches Pressure ft. - lbs. (N.m)
High Pressure

5/16 3/4 70 (94.9) psi (bar)

3/8 (100K) 3/4 105 (142.8) Flat Top

9/16 10,000 (690) F562FT 60 (81.3)
Gasket
9/16 (40K) 1-3/16 60 (81.4)
7/16 10,000 (690) F437FB 25 (33.9)
9/16 1-3/16 75 (101.7) Flat Bottom
9/16 10,000 (690) F562FB 40 (54.2)
9/16 (100K) 1-3/16 125 (169.5) Gasket
1 (See Note **) 1-3/8 150 (203.3) 3/4 5,000 (345) F750FB 60 (81.3)
1 (See Note ***) 1-3/8 180 (244.0)
** Torque for 1 tubing @ 30,000 psi (2068 bar).
*** Torque for 1 tubing @ 43,000 psi (2965 bar).
Torque wrench not required for Parker Autoclave Engineers SpeedBite tube connection-see page 2.
All dimensions for reference only and subject to change.
All general terms and conditions of sale, including limitations of our liability, apply to all products and services sold. 13
Torque Values

Parker AE Packing Glands Parker AE Packing Glands

Outside Outside
Diameter Packing Required Diameter Packing Required
Valve Torque1 Valve Torque1
Series Size Gland Hex Series Size Gland Hex
(inches) (Inches) ft.-lbs. (N.m) (Inches) (Inches) ft.-lbs. (N.m)

1/8 1/2 12 (16.3) 40VM 9/16 13/16 40 (54.2)

1/4 13/16 40 (54.2) 1/4 13/16 60 (81.3)
10V
3/8 13/16 40 (54.2) 60VM 3/8 13/16 60 (81.3)
1/2 13/16 30 (40.7) 9/16 13/16 60 (81.3)
1/4 5/8 30 (40.7) 100VM 5/16 15/16 60 (81.3)
SW 3/8 5/8 4 (54.2) 150V 5/16 1-3/8 150 (203.3)
1/2 13/16 50 (67.8) 3/4 15/16 130 (176.3)
15Y
1/4 5/8 40 (54.2) 1 1-1/16 150 (203.3)
10SM 3/8 5/8 40 (54.2) 50Y 9/16 15/16 85 (115.2)
& 9/16 13/16 80 (108.5) 10VRMM 9/16 9/16 20 (27.1)
20SM 3/4 13/16 Note: 2 3/4 13/16 50 (67.8)
30VRMM
1 1-3/8 20 (27.1) 1/4 13/16 50 (67.8)
60VRMM
30SC 1 1-3/8 230 (311.8) 3/8 13/16 50 (67.8)
1/4 13/16 60 (81.3)
1 - Torque may vary 10%. Torque values apply to standard PTFE packing. For
30VM 3/8 13/16 60 (81.3) graphite yarn packing, add 25% to tthe above values.
9/16 13/16 60 (81.3)
2 - 3/4 turn past finger tight with hex wrench.

Special Material Connection Torque Table Pressure psi (bar) vs. Torque ft.-lbs. (N.m)
Note: Use the recommended torque value for special material valves and fittings based on the maximum allowable working pressure of the valve
or fitting

Pressure psi (bar)

Connection
Minumum 2,500 (172) 5,000 (345) 10,000 (690) 15,000 (1034) 20,000 (1379) 25,000 (1724) 30,000 (2068) 40,000 (2758) 50,000 (3447) 60,000 (4137)

SF250CX 10 (13.6) 10 (13.6) 10 (13.6) 10 (13.6) 15 (20.3) 20 (27.1)

SF375CX 10 (13.6) 10 (13.6) 10 (13.6) 15 (20.3) 25 (33.9) 30 (40.7)

SF562CX10 20 (27.1) 20 (27.1) 30 (40.7) 55 (74.6)

SF562CX20 15 (20.3) 15 (20.3) 15 (20.3) 30 (40.7) 40 (54.2) 55 (74.6)

SF750CX10 25 (33.9) 25 (33.9) 40 (54.2) 75 (101.7)

SF750CX20 20 (27.1) 20 (27.1) 25 (33.9) 45 (61.0) 70 (94.9) 90 (122.0)

SF1000CX10 40 (54.2) 40 (54.2) 65 (88.1) 125 (169.5)

SF1000CX20 35 (47.5) 35 (47.5) 50 (67.8) 100 (135.6) 115 (156.0) 125 (169.5)

F1000C43 30 (40.7) 30 (40.7) 50 (67.8) 65 (88.1) 75 (101.7) 100 (135.6) 125 (169.5) 150 (203.3) 180 (244.0)

F250C 10 (13.6) 10 (13.6) 10 (13.6) 10 (13.6) 10 (13.6) 10 (13.6) 15 (20.3) 15 (20.3) 20 (27.1) 25 (33.9) 25 (33.9)

F375C 10 (13.6) 10 (13.6) 10 (13.6) 10 (13.6) 15 (20.3) 20 (27.1) 25 (33.9) 25 (33.9) 35 (47.5) 45 (61.0) 50 (67.8)

F562C 15 (20.3) 15 (20.3) 15 (20.3) 15 (20.3) 20 (27.1) 25 (33.9) 35 (47.5) 40 (54.2) 50 (67.86) 65 (88.1) 75 (101.7)

F562C40 15 (20.3) 15 (20.3) 15 (20.3) 15 (20.3) 25 (33.9) 30 (40.7) 40 (54.2) 45 (61.0) 60 (81.3)

14 All general terms and conditions of sale, including limitations of our liability, apply to all products and services sold.
Tube Connection Dimensions
B
Thread
A Drill
F

C
Parker Autoclave SpeedBite SW* D
E

Tube Dimensions inches (mm)

Outside Connection
Diameter Type
(inches) A B C D E F G G

1/4 SW250 29/64 (11.5) 1/2 -20 0.34 (8.6) 0.44 (11.1) 0.69 (17.5) 0.34 (8.6) F 0.257 (6.5)

3/8 SW375 37/64 (14.7) 5/8 -18 0.38 (9.7) 0.47 (11.9) 0.75 (19.1) 0.48 (12.1) W 0.386 (9.8)

1/2 SW500 3/4 (19.1) 13/16 -16 0.41 (10.4) 0.50 (12.7) 0.81 (20.6) 0.60 (15.21) 0.514 (13.1)

B
Thread

Parker Autoclave SpeedBite W* A Drill

Tube
Outside Connection Dimensions inches (mm) C
D
Diameter E
Type
(inches) A B C D E F G

1/16 W062
W125 Q 0.332 (8.4) 3/8 -24 0.22 (5.6) 0.31 (7.9) 0.47 (11.9) 0.19 (4.8) #30 0.128 (3.3)
1/8
G

1/4 W250 11/16 (17.4) 3/4 -16 0.38 (9.7) 0.44 (11.1) 0.69 (17.7) 0.35 (8.9) F 0.257 (6.5)

3/8 W375 11/16 (17.4) 3/4 -16 0.38 (9.7) 0.44 (11.1) 0.69 (17.7) 0.48 (12.1) W 0.386 (9.8)

QSS
Tube Dimensions inches (mm)
Outside Connection
Diameter Type
(inches) A B C D E F G

1/4 QSF250 29/64 (11.5) 1/2 -20 0.34 (8.6) 0.44 (11.1) 0.69 (17.5) 0.34 (8.6) F 0.257 (6.5)

3/8 QSF375 37/64 (14.7) 5/8 -18 0.38 (9.7) 0.47 (11.9) 0.75 (19.1) 0.48 (12.1) .038" (9.7)

9/16 QSF562 7/8 (22.2) 15/16 -16 0.57 (14.5) 0.704 (17.9) 1.25 (31.8) 0.712 (18.1) 0.57 (14.5)

3/4 QSF750 1-3/16 (30.15) 1-1/4 -18 0.83 (21.08) 1.00 (25.40) 1.56 (39.62) 0.95 (24.13) 0.76 (19.30)

1 QSF1000 1-9/16 (39.70) 1-5/8 -16 .75 (19.1) .88 (22.2) 1.56 (39.62) 1.24 (31.5) 1.02 (26.0)

Note: All dimensions are shown for reference only and should not be consid- For prompt service. Parker Autoclave Engineers stocks select products.
ered as actual machining dimensions. Consult factory. All general terms and conditions of sale, including limitations
of our liability, apply to all products and service sold.
*For port diameter please see orifice sizes for specific valves and fittings.

All threads are manufactured to a class 2A or 2B fit.

All general terms and conditions of sale, including limitations of our liability, apply to all products and services sold. 15
Tube Connection Dimensions

Parker Autoclave Medium Pressure SFCX **

Dimensions inches (mm)
Tube Outside Connection
(inches)
60
Type
A B C D F H

B
1/4 SF250CX20 25/64 (9.9) 7/16 -20 0.28 (7.1) 0.50 (12.7) 0.19 (4.8) 0.109 (2.8) Thread
A
Drill
3/8 SF375CX20 33/64 (13.1) 9/16 -18 0.38 (9.7) 0.62 (15.7) 0.31 (7.9) 0.203 (5.2) F
C
9/16 *SF562CX10 3/4 (19.1) 13/16 -16 0.44 (11.1) 0.75 (19.1) 0.50 (12.7) 0.359 (9.1) D
SF562CX20 0.312 (7.9)
*SF750CX10 61/64 (24.2) 0.516 (13.1) 5
3/4 3/4 -14z 0.50 (12.7) 0.94 (23.9) 0.62 (15.7)
SF750CX20 0.438 (11.1)
Weep
*SF1000CX10 1-19/64 (32.9) 1-3/8 -12 0.81 (20.6) 1.31 (33.3) 0.88 (22.4) 0.688 (17.5) hole
1 H
SF1000CX20 0.562 (14.3)
1-1/2 SF1500CX 1.790 (45.47) 1-7/8 -12 1.00 (25.4) 1.594 (40.49) 1.375 (34.93) .937 (23.80) Z = NPS Male Tap

* Connection used in fittings rated for 20,000 psi (1379 bar) .

Parker Autoclave High Pressure FC**

Dimensions inches (mm)
Tube Outside Connection
(inches) Type 60
A B C D F H
B
Thread
1/4 F250C 33/64 (13.1) 9/16 -18 0.38 (9.7) 0.44 (11.1) 0.17 (4.3) 0.094 (2.4) A
Drill
F
3/8 F375C 11/16 (17.4) 3/4 -16 0.53 (13.5) 0.62 (15.7) 0.26 (6.6) 0.125 (3.2)
5 C D
9/16 F562C 1-3/64 (26.6) 1-1/8 -12 0.62 (15.7) 0.75 (19.1) 0.38 (9.7) 0.188 (4.8)

9/16 F562C40 1-3/64 (26.6) 1-1/8 -12 0.62 (15.7) 0.75 (19.1) 0.38 (9.7) 0.250 (6.4)
Weep
hole
5/16 F312C150 37/64 (14.7) 5/8 -18 0.62 (15.7) 1.06 (26.9) 0.25 (6.4) 0.094 (2.4) H

1 F1000C43 1-19/64 (32.9) 1-3/8 -12 0.81 (20.6) 1.31 (33.3) 0.88 (22.4) 0.438 (11.1)

Note: All dimensions are shown for reference only and should not be consid- For prompt service. Parker Autoclave Engineers stocks select products.
ered as actual machining dimensions. Consult factory.All general terms and conditions of sale, including limitations
of our liability, apply to all products and service sold.
*For port diameter please see orifice sizes for specific valves and fittings.
**For male tubing end preparation, please see pages 5 and 6.

All threads are manufactured to a class 2A or 2B fit.

16 All general terms and conditions of sale, including limitations of our liability, apply to all products and services sold.
Hydraulic Tube Bender

For Single Pass Bending of High Pressure Tubing Minimum Bend (Mandrel) Radius
The Parker Autoclave Engineers hydraulic tube bender is Tube Size Minimum
Shoe*
designed to bend heavy wall tubing and provide fast, accurate Catalog Inches (mm) Rated
Minimum
Bend Inside
Length
Required 90
and reliable bending with only one setup. The tube bender is Number Outside Inside Pressure (bar) Radius
Inches (mm)
Bend
Inches (cm)
Diameter Diameter
complete with pump, cylinder, frame and bending shoes which
are self contained in a portable, lockable case. 201A-6016 9/16 (14.29) 0.359 (9.12) 15,000 (1034) 2.62 (66.5) 14 (35.6)
(Order number: HTB)
201A-6018 3/4 (19.05) 0.516 (13.11) 15,000 (1034) 3.50 (88.9) 16 (40.6)

201A-6020 1 (25.4) 0.688 (17.48) 15,000 (1034) 4.62 (117.3) 22 (55.8)

201A-6014 1/4 (6.35) 0.109 (2.77) 20,000 (1379) 1.25 (31.8) 8 (20.3)

201A-6014 3/8 (9.53) 0.203 (5.16) 20,000 (1379) 1.75 (44.5) 8 (20.3)

201A-6016 9/16 (14.29) 0.312 (7.92) 20,000 (1379) 2.62 (66.5) 14 (35.6)

201A-6018 3/4 (19.05) 0.438 (11.13) 20,000 (1379) 3.50 (88.9) 16 (40.6)

201A-6020 1 (25.4) 0.562 (14.27) 20,000 (1379) 4.62 (117.3) 22 (55.8)

201A-6020 1 (25.4) 0.438 (11.13) 43,000 (2965) 4.62 (117.3) 22 (55.8)

201A-6014 1/4 (6.35) 0.083 (2.10) 60,000 (4137) 1.25 (31.8) 8 (20.3)

Features 201A-6014 3/8 (9.53) 0.125 (3.18) 60,000 (4137) 1.75 (44.5) 8 (20.3)
Dimensions: 27.5W x 14.0H x 14.0D (69.9cm x 35.6cm x
35.6cm). 201A-6016 9/16 (14.29) 0.250 (6.35) 40,000 (2758) 2.62 (66.5) 14 (35.6)
Weight: 55 lbs. (29.9 Kg)
201A-6016 9/16 (14.29) 0.188 (4.78) 60,000 (4137) 2.62 (66.5) 14 (35.6)
Single-stage hydraulic hand pump (standard)
Ram retractor valve relieves system pressure after bending. N/A** 5/16 (7.94) 0.062 (1.57) 150,000 (10342) 6.00 (152.4) 8 (20.3)
The spring loaded ram retracts for easy removal of tubing after
bending is completed. Annealed Parkre Autoclave Engineeers pressure tubing may also be bent on
HTB tube bender using bending shoe sizes specified above.
Quick release pivot pins lock and unlock easily for tube
removal. * HTB bending shoes are constructed of heat-treated aluminum alloy and
designed specifically for use with Parker Autoclave Engineers heavy wall
One-piece shoe locking pin locks bending shoe securely but stainless tubing. They are not intended for bending such components as com-
allows for quick release to interchange shoes. mercial pipe. Because of diameter differences, such misuse could fracture the
bending shoe.
Rugged bending frame is lightweight, aircraft quality, alumi-
num alloy. ** Information on bending 150,000 psi (10342 bar) tubing is included here for
reference only. This tubing should not be bent on HTB hydraulic tube bender
Precision one-piece bending shoes are permanent mold, because of the 6 required minimum radius.
heat-treated, aircraft quality, aluminum alloy.
Value shown is mimimum bend radius of the tubing; bending shoe furnished
Air-operated hydraulic pump option can be furnished in place (201A-6014) will bend tubing to 1.75 (44.5).
of standard hand pump. (Add -A to order number) Operating
pressure 0 to 10,000 psi (0 to 690 bar). Required air pres- Pressure rating of the bent tube will be reduced. Consult the Technical
Application section for pressure rating at various bend radii.
sure 30 psi (2.1 bar) minimum 120 psi ( 8.3 bar) maximum.
Reservoir capacity 24 cu. in. (393cm3). Available with optional All dimensions for reference only and subject to change.
hydraulic pressure gauge and gauge adapter. A lubricator/air
separator is recommended for air operated units.

All general terms and conditions of sale, including limitations of our liability, apply to all products and services sold. 17
Tools, Installation, Operation and Maintenance - Lubrication Guide
Lubrication Guide

General Information
For reliable operation and long life of hand valves, air valves,
relief valves, check valves and safety heads, Parker Autoclave
Engineers strongly recommends proper lubrication of all
Metal to Metal
components that are subject to friction during assembly and / Lubricant
or operation. This is especially important where metal to metal
contact occurs such as on connection gland threads, packing
gland threads and stem threads. Without proper lubrication,
the high loads imposed on these threads may cause the parts O-ring
to weld (or gall) together from the high metal to metal contact Lubricant
forces and friction heat. Lubrication is also essential for the
effective sealing and long life of o-rings, especially those that
are used in dynamic sealing applications. The performance of
metal to metal seals will be improved with lubrication but, they
do not absolutely require it.

Lubricant selection is strongly dependent on the application

of the given component. Process fluids, fluid temperature,
ambient environment temperature, materials and other factors
are important in selecting a lubricant. This manual gives some
basic guidelines in the proper selection and application of lu-
bricants. The end user must ultimately determine the suitability Figure 2
Air Valve Piston
of a lubricant based on process requirements. Lubrication Sites

Note: Parker Autoclave Engineers assumes no liability in

selecting lubricant for customer applications.

Lubrication Sites
1. Speedbite, Slimline and High Pressure Connections in
all valves and fittings - Prior to assembly, the connection
gland should be lubricated on the threads and on the area that Metal to Metal
is in contact with the sleeve or collar. Parker AE provides as Lubricant

standard a dry molybdenum disulfide lubricant on Speedbite

glands unless specified otherwise. If process tolerable, a
small amount of any lubricant (or process fluid) on the end of
the tube cone or connection sleeve will help to maximize the
metal-to-metal sealing process. This inherently provides for
better sealing of gases.

2. Hard Valves - Ideally, the non-rotating stem should be Metal to Metal

lubricated along the shank that fits into the threaded stem Lubricant
(If not MoS2
sleeve as well as on the surfaces that are in contact with the {dry} film coated)

stem washers. The threaded stem sleeve should be lubri-

cated on the stem threads and at the ends (see Figure 1). The
packing gland should be lubricated on the external threads
and on the end that is in contact with the packing washer. For Metal to Metal
valves with replacement seats, the external threads on the seat Seal Surface
Lubricant
retainer and the portion of the seat retainer in contact with
the seat should be lubricated. Figure 1
Hand Valve
3. Air Valves - The packing gland and seat retainer (if the Lubrication Sites

valve has a replaceable seat) should be lubricated in the same

manner as the hand valve. Threads should also be lubricated
on all of the yoke screws (for yoke style valves) and on the
retainer insert (on other air operated valves).

18 All general terms and conditions of sale, including limitations of our liability, apply to all products and services sold.
For piston type air operators, o-ring lubricant should be 1. Jet Lube SS-301 - This lubricant consists of pure copper
applied to the inside of the operator housing, on the center flakes that are homogenized into a non-melting, nonvolatile
rod and on all the o-rings, on the pistons and divider plates. viscous carrier. It is fortified with anti-oxidants, rust and cor-
On air-to-open diaphragm operators, the o-ring on the stem rosion inhibitors. Jet Lube SS-30 is the standard lubricant for
should be lubricated. The threads and end of the spring adjust- Parker Autoclave VFT components with sliding metal to metal
ment screw should be lubricated on all air-to-open valves. contact surfaces. The surfaces are copper coated and prevents
Refer to Figure 2 and 3 for lubrication sites on piston and seizure, galling and heat freeze. SS-30 comes in the form of
diaphragm style operators. a thick oil that can be easily brushed on the surfaces to be
4. Check Valves - The gland nut should be lubricated on the lubricated. The absolute service temperature range is from 0 to
external threads and at the end where it contacts the cover. 1800F (-17.8 to 982C). Jet Lube SS-30 is not recommended
The cover should be lubricated at the sealing surface where for extreme low temperature applications or processes that will
it contacts the body. For o-ring check valves, a small amount not tolerate the presence of copper.
of o-ring lubricant on the o-ring will help swell the elastomer 2. Jet Lube MP-50 Moly Paste1 - This is a thick paste that
and aid sealing. Refer to Figure 4 for lubrication sites on check contains molybdenum disulfide (MoS). This lubricant is
valves. suitable for preventing seizure and galling of parts at absolute
5. Relief Valves - Threads should be lubricated on the cap, temperatures of -300 to 750F (-184 to 399C). It is recom-
spring cylinder, adjustment bolt and on the seat gland. Refer mended for metal to metal components that are exposed to
to Figure 5 for lubrication sites on the relief valve. temperatures of less than 0F. Other lubricants may solidify
under these conditions and prevent the effective operation of
6. Safety Heads - The threads and end of the hold down nut dynamic components.
should be lubricated. Refer to figure 6 for lubrication sites on
the safety head. 3. DuPont Krytox 240AC2 - Krytox is a non-flammable
fluorinated grease used for metal to metal lubrication in valves
For any part not covered in the above statements, the general that are cleaned and designated for oxygen service. It comes
rule is that parts that will move against each other during in the form of a white grease and has a recommended absolute
assembly or operation should be lubricated at the points/areas service temperature range of -15 to 500F (-26.1 to 260C).
of contact.
4. Molycoat 55M4 (Dow Corning) - This grease is used for
static lubrication between rubber and metal parts in ball valves
Recommended Lubricants and o-ring check valves. It is a silicone based lubricant and
Note: This information is provided for reference only. The meets Military Specifications MIL-G-4343. It is not recom-
manufacture of the lubricant should be contacted for specific mended for use on silicone rubber o-rings and seals. It has
information based on your application. Refer to the material a recommended absolute service temperature range of
safety data sheets for information on safe usage and storage -85 to 350F (-65 to 177C).
methods for these lubricants. 5. Neolube DAG 1563 - This is a dry film lubricant for valves
used in Navy Nuclear service. It consists of graphite particles
in a thermoplastic resin and ispropanol and meets Military
Specification MIL-L-24131B. The dry film form allows tight
control of impurities that are required for these applications.
It has an absolute service temperature of -100 to 400F.
6. LubriPlate-NSF H-1 Registered, Extremely Tacky, Food
Grade Greases - This grease is used for dynamic lubrication
between rubber and metal parts in pneumatic systems such
as piston style air operators. A tacky, adhesive, highly water
resistant grease for medium to slow dynamic speeds. It has
a recommended absolute service temperature range of
-0 to 350F (-17.8 tp 177C).

Metal to Metal
Lubricant

O-ring
Figure 3 Lubricant
Air Valve (Diaphragm) Figure 4
Lubrication Sites Check Valve
Lubrication Sites

All general terms and conditions of sale, including limitations of our liability, apply to all products and services sold. 19
Tools, Installation, Operation and Maintenance - Lubrication Guide
Services
For service, contact the Parker Autoclave Engineers Representative in your area, or FAX Parker Autoclave Engineers Customer
Support Services at 1-814-860-5703.

Metal to
Metal to Metal Metal Lubricant
Lubricant

Metal to Metal
Seal Surface Lubricant

Figure 5 Figure 6
Relief Valve Safety Head
Lubrication Sites Lubrication Sites

Lubrication Selection Chart

Lubrication Part No. Application Absolute Service Temperature Range
Jet-Lube SS-30 P-3580 Metal to Metal, Standard Application 0F to 1800F (-18C to 982C)
Jet-Lube Moly Paste MP-50 P-9766 Metal to Metal, Low Temperature Application -300F to 750F (-185C to 398C)
Krytox 240 AC 53893 Metal to Metal, Oxygen Clean Components -15F to 500F (-26C to 260C)
MolyKote 55 Dow Corning 90085 Check Valve Ball and Poppet Lubricant -85F to 350F (-65C to 177C)
Neolube DAG 156 90406 Metal to Metal, Nuclear Service -100F to 400F (-73C to 204C)
LubriPlate Pure Tac P-9981 Dynamic O-ring Seals-Air Operator Housing 0F to 350F (-18C to 177C)
1
Notes: Specific applications may require other service temperature ranges. SS-30 and MP-50 Moly Paste are registered trademarks of Jet Lube Inc.
2
Krytox is a registered trademark of E.I.duPont de Nemours & Co., Inc.
3
DAG is a registered trademark of Acheson Industries, Inc.
4
Molycoat and Dow Corning are registered trademarks of Dow Corning Corp

Offer of Sale
The items described in this document are available for sale by Parker Hannifin Corporation, its subsidiaries or its authorized distributors. Any sale contract entered by Parker will be governed by the provisions
stated in Parker's standard terms and conditions of sale (copy available upon request).

2013 Parker Hannifin Corporation | Autoclave Engineers is a registered trademark of the Parker Hannifin Corporation 02-0140SE January2013

Caution! Do not mix or interchange parts or tubing with those of

other manufacturers. Doing so is unsafe and will void warranty.

Instrumentation Products Division Parker Hannifin Manufacturing Ltd. Caution! Parker Autoclave Engineers Valves, Fittings and Tools are
not designed to work with common commercial instrument tubing
Autoclave Engineers Operation Instrumentation Products Division, Europe
and will only work with tubing built to Parker Autoclave Engineers
8325 Hessinger Drive Industrial Estate Whitemill
AES Specifications. Failure to do so will void warranty.
Erie, Pennsylvania 16509-4679 USA Wexford, Republic of Ireland
PH: 814-860-5700 FAX: 814-860-5811 PH: 353 53 914 1566
www.autoclave.com FAX: 353 53 914 1582 ISO-9001 Certified
Technical Information
The information presented in this section is intended to assist
designers in the proper selection of Parker Autoclave Engi-
neers valves, fittings and tubing for fluid handling systems.
This technical data does not represent product specifications
but rather guidelines for direction in the proper application
of the referenced equipment. These guidelines are general in
nature because of the many process variables.

For severe service applications, selection of the appropriate

valves, fittings and tubing is essential in order to optimize
the service life of these products. Parker Autoclave Engineers
technical staff is available to assist in the interpretation of
this information.

Technical Information

All general terms and conditions of sale, including limitations of our liability,www.autoclave.com
apply to all products and services sold.
www.autoclave.com 1
Technical Information - General Information
Technical and Application Information

Materials:
Widely varying conditions frequently require that valves, ing material for the majority of extremely high temperature
fittings and tubing be constructed of materials other than con- applications, some gases may permeate more readily through
ventional stainless steel. Since many variables affect the corro- graphite yarn packing than through the PTFE packing in a valve
sion resistance of metallic materials, it is Parker Autoclave with an extended stuffing box. The packing material must be
Engineers policy not to recommend materials based on kept below the maximum permitted temperature listed on
corrosion resistance for specific fluid applications. We can, page 5.
however, suggest materials based on mechanical strength and
Valve Stem Seating:
also indicate materials generally used in a specific application.
Other materials not listed in this section are also available. Abrasive flow or high cycle service will require more frequent
maintenance. Special materials and the proper valve series
Pressure: selection may extend service life. For example, if flow is not
Included in this section are the standard pressure ratings for critical, a 30VM valve with an N-Dura stem will require less
several common materials for valves and fittings as well as maintenance than an SW series valve used in a low pressure,
tubing. Parker Autoclave Engineers stocks a select quantity of high cycle, abrasive flow application. Although all application
special material tubing for immediate delivery. parameters cannot be considered in this section, the user can
generally expect several thousand cycles in a liquid application
Temperature: and several hundred cycles for gas service. The packing gland
Also contained in this section are pressure reduction factors may require adjustment, however, to achieve these results.
at various temperatures for several materials. To obtain the
maximum pressure rating at an elevated temperature, multiply Pressure Cycling:
the maximum pressure rating of the item at room temperature In medium and high pressure applications, static as well as
by the elevated temperature factor (% of RT). dynamic (cyclic) pressure must be considered when selecting
High and low temperatures or high heat up and/or cool down an appropriate valve series. If fatigue life is a concern, Parker
rates can affect the capability of a metal-to-metal seal. When Autoclave Engineers can supply tubing which has been auto-
selecting a valve series, consideration should not only be given frettaged for improved fatigue resistance. For internally pres-
to static pressure rating, but also static and dynamic surized tubing, autofrettaging is a method by which the inner
temperature conditions. Generally, the smaller the seal diam- wall of the tube is precompressed to reduce the tube operating
eter of a metal-to-metal seal, the more reliable the seal will be. bore stresses. By applying sufficient internal pressure, greater
than the maximum working pressure of the tube, the inner wall
Gas or Liquid Service: is plastically deformed by a controlled amount. The remain-
Light gases such as hydrogen and helium are more difficult to ing outer portion of the wall acts elastically, and when the
seal than liquids. When selecting a valve series, consideration pressure is released, a positive compressive load at the bore
should be given to the fluid application and not just pressure will exist. As mentioned previously, the result is reduced bore
and temperature requirements. The higher the rating of the stress and increased fatigue life. In addition to the autofrettag-
valve or fitting, the less the likelihood of weepage problems ing method to increase cycle life, Parker Autoclave Engineers
with light gases. Tubing selections should also consider the offers HP-HC (high-pressure high cycle) tubing, rated to
service requirements, since thicker wall, smaller outside 100,000 psi (6895 bar). This tubing can be substituted for our
diameter tube sizes will produce a more reliable connection standard 60,000 psi (4137 bar) tubing providing longer life at
seal. Handling of fittings and tubing during installation will 60,000 psi (4137 bar) operation.
make a difference in sealability of light gases as well as liquids. Vacuum Service:
Do not handle the tube or fitting in such a way as to damage
the sealing surfaces. If it is process tolerable, a small amount The high, medium and low pressure series of Parker Autoclave
of lubrication (or even process fluid) on the seal area during Engineers standard valves, fittings and tubing can be used in
installation will help the sealing process. Refer to the Tools, light vacuum services to 10-2 torr. For high vacuums to 10-5 or
Installation, Operation and Maintenance section for further 10-6 torr, Parker Autoclave Engineers high pressure series is
information. recommended. Extreme care and proper seal lubrication is re-
quired (as mentioned in the Gas or Liquid Service paragraph)
Valve Stem Packing Materials: to achieve these degrees of vacuum. The pump type and size
The considerations listed thus far should be applied when will determine the final vacuum pressure.
selecting a suitable valve stem packing material (PTFE, PTFE
glass or Graphite yarn). Where possible, PTFE packing is the
most reliable, low maintenance, packing choice; PTFE/glass is
the second. While graphite yarn packing is a reliable pack-

2 All general terms and conditions of sale, including limitations of our liability, apply to all products and services sold.
Technical Information - Coned & Threaded Connections
Parker Autoclave Engineers Medium & High Pressure Coned and Threaded Connections

Parker Autoclave Engineers Medium Pressure Coned and Threaded Connections

Features:
Pressures to 20,000 psi (1379 bar)
Uncompromised reliability under rigorous thermal and Gland

pressure cycling. Collar

Cold-worked
Valve or Fitting
Design is a more compact version of the original Parker Body
Tubing

Autoclave Engineers High Pressure connections.

Well suited to installations which require repeated assembly
and disassembly with consistent reliability.
Available in tube outside diameter sizes from 1/4(6.35 mm)
through 1-1/2 (38.10 mm) and bore sizes from .109(2.77 Line-contact
mm) to .938(23.83 mm). Sealing
Positive Backup
Support
Note: 1" 43,000 psi (2965 bar) utilizes the medium pressure
coned and threaded connection.

Differences in angles exaggerated for clarity.

Parker Autoclave Engineers High Pressure Coned and Threaded Connections

Features:
Pressures to 60,000 psi (4137 bar)
Increased pressure handling capabilities Gland
Collar
Uncompromised reliability under rigorous thermal and Valve or Fitting
Body
pressure cycling Cold-worked
Tubing
Well suited to installations which require repeated assembly
and disassembly with consistent reliability.
Available in tube outside diameter sizes of 1/4 (6.35mm),
3/8(9.53mm) and 9/16(14.27mm) and bore sizes of
.083(2.11mm), .125(3.18mm), .188(4.78mm) and
.250(6.35mm).
Line-contact
Positive Backup
Sealing
Support

Differences in angles exaggerated for clarity.

All general terms and conditions of sale, including limitations of our liability, apply to all products and services sold. 3
Technical Information - Coned and Threaded Connections
Design Considerations - Why Coning and threading?

High-pressure designs require a superior joining technique Vacuum Service:

for valves, fitting and tubing. Conventional joining methods Parker Autoclave Engineers' Medium-Pressure connections
fall short of the reliability needed for pressures above 10,000 can be reliably used in light vacuum service to 10-2 torr. Parker
- 15,000 psi (690-1034 bar) and tube sizes above 1/4 outside Autocalve Engineers' High-Pressure connections are recom-
diameter. Dissimilar angles between the body and the tube mended for vacuum to 10-5 torr. Extreme care and proper seal
cone provide line contact sealing along the perimeter of a lubrication are required to successfully achieve these levels of
contact circle. The sealing contact area is therefore, maintained vacuum.
at its practical minimum for the given tube size and a reliable
seal is produced due to high sealing stresses that occur at Pressure Cycling:
low sealing loads. When process tolerable, a small amount of Since the metal to metal seal is pre-torqued to a specified
lubricant (or even process fluid) on the seal area will help value greater than the end load generated from the pressure,
improve the reliability of the metal to metal seals, especially fatigue concerns of the connection due to pressure cycling are
when light molecule gases are to be sealed. The metal to metal minimal.
seal also eliminates the need for elastomers in the
connections. Thermal Cycling:

Positive backup support occurs with the collar threaded Because of the threaded on collar design, Parker Autoclave
(left-handed) directly onto the tubing to form a positive Engineers' Medium and High-Pressure connections can take
integral retaining surface. This allows for a consistent repeated thermal cycling under pressure with no loss in reli-
connection make up that is required at higher pressures and ability. These connections can also handle a wider range of
temperatures. When the gland nut is threaded into the temperatures than swaged or bite type connections and are
connection, the tubing is locked securely in place and the designed to maintain integrity from -423F to 1200F (-252C
possibility for the ejection of the tubing from a properly to 649C).
assembled and used connection is extremely remote. Pre-Rated Systems:
Remarks: Valves, fittings and tubing with Parker Autoclave Engineers'
Since the glands and threaded collars can be removed from Medium and High-Pressure connections provide a fully engi-
the tubing, properly lubricated Parker Autoclave Engineers neered, pre-rated system of components that are interchange-
Medium-Pressure and High-Pressure connections can be dis- able from assembly to assembly. They are not over sensitive to
assembled and reassembled repeatedly without loss of relabil- abuse or careless assembly and no special gauges or tools are
ity. These connections are used with cold-worked valve and needed to check the connection. Weep holes are provided in
fitting bodies which can withstand many repeated sealings. every connection to permit fast visual inspection for leakage,
Therefore, valves, fittings and accessories can be inserted or and prevent pressure build up in the threads.
removed from the pressure system or the system can be Materials:
altered or expanded in a fraction of the time and cost that may
Parker Autoclave Engineers' standard gland and collar material
be imposed by welded, screwed, flared or other types of
is type 316 cold-worked stainless steel. This material provides
connections.
high strength and good impact resistance over the tempera-
ture range mentioned above. A bonded dry film lubricant, to be
used as an anti-galling agent, is available.
Pipe Thread Information

In some applications pipe threads may be preferred in place NOTE: NPT (Pipe) connections
of standard Parker Autoclave Engineers connections. Pipe NPT threads must be sealed using a high quality PTFE tape and/or
PTFE paste product. Refer to thread sealant manufacturers instructions
threads for pressure seals are tapered or combination of on how to apply thread sealant.
taper and straight. A number of factors apply to pipe threads Sealing performance may vary based on many factors such as pressure,
for high-pressure sealing. Thread form or the quality of the temperature, media, thread quality, thread material, proper thread
engagement and proper use of thread sealant.
thread, which refers to the gauging or thread dimensions. Customer should limit the number of times an NPT fitting is assembled
Another is the actual machining of the thread producing the and disassembled because thread deformation during assembly will
required finish to prevent thread galling. result in deteriorating seal quality over time. When using only PTFE tape,
consider using thread lubrication to prevent galling of mating parts.
Pipe threads can be used up to 15,000 psi (1034 bar) safely
if proper installation procedures are followed. The following Temperature limitations for pipe threads are based on material
should be adhered to when using pipe threads. strength and thread sealant. Parker Autoclave Engineers limits
its pipe thread components to 0F (17.8C) to 400F (204C)
and pressures as stated in the components sections.
4 All general terms and conditions of sale, including limitations of our liability, apply to all products and services sold.
Technical Information - Pressure/Temperature Rating Guide
Pressure/temperature Rating Guide

Information in this rating guide is furnished to approximate the Refer to appropriate tubing section for pressure ratings of
pressure/temperature capabilities of Parker Autoclave standard Parker Autoclave Engineers' tubing at various tem-
Engineers valves and fittings with various options. peratures to 800F (427C).
Note maximum temperature ratings for Parker Autoclave
To determine approximate ratings, the following factors should Engineers' valves with various packing and stem options in
be considered: table below.
Refer to valve or fitting ordering pages for the base pressure Note pressure/temperature curve on page 6 for type 316
rating of component at room temperature (R.T.). stainless steel bodies and tubing.
Refer to Technical Information section for pressure ratings of Note temperature information checklist on page 6.
materials at elevated temperatures.

Packing Temperature: F (C)

Standard Standard Optional Optional Optional
Valve Stem Type PTFE Nylon- PTFE Graphite Extended
Stem Packing Leather Glass2 Yarn1 Stuffing Box
Min Max Min Max Min Max Min Max

10V Vee or Reg., Metal-to-Metal -100 (-73) 450 (232) NA NA -100 (-73) 600 (316) 0 (-17.8) 8002 (427)

SW Vee or Reg., Metal-to-Metal -100 (-73) 450 (232) NA NA -100 (-73) 600 (316) 0 (-17.8) 8002 (427)

10SM/20SM Vee or Reg., Metal-to-Metal -100 (-73) 450 (232) NA NA -100 (-73) 600 (316) 0 (-17.8) 800 (427)

30SC Vee or Reg., Metal-to-Metal -100 (-73) 450 (232) NA NA -100 (-73) 600 (316) NA NA

30VM Vee or Reg., Metal-to-Metal -100 (-73) 450 (232) NA NA -100 (-73) 600 (316) 0 (-17.8) 800 (427)
See page 2
40VM Vee or Reg., Metal-to-Metal NA NA 40 (4.4) 230 (110) -100 (-73) 600 (316) 0 (-17.8) 800 (427) of Extreme Tem-
perature Series
60VM Vee or Reg., Metal-to-Metal NA NA 40 (4.4) 230 (110) -100 (-73) 600 (316) 0 (-17.8) 800 (427)
Needle Valve
100VM Vee Stem, Metal-to-Metal NA NA 40 (4.4) 230 (110) NA NA NA NA Section
for information
15Y Vee or Reg., Metal-to-Metal -100 (-73) 450 (232) NA NA -100 (-73) 600 (316) 0 (-17.8) 800 (427) on extended
stuffing box.
50Y Vee or Reg., Metal-to-Metal -100 (-73) 450 (232) NA NA NA NA 0 (-17.8) 800 (427)

10VRMM Micrometering -100 (-73) 450 (232) NA NA -100 (-73) 600 (316) 0 (-17.8) 8002 (427)

30VRMM Micrometering -100 (-73) 450 (232) NA NA -100 (-73) 600 (316) 0 (-17.8) 800 (427)

60VRMM Micrometering NA NA 40 (4.4) 230 (110) -100 (-73) 600 (316) 0 (-17.8) 800 (427)

(No Suffix Required) (Add TG to (Add GY to

Order Number) Order Number)

Caution: While testing has shown O-rings to provide satisfactory 3. Compression sleeve-type connections such as Parker Autoclave
service life, both cyclic and shelf life may vary widely with differing Engineers UniVersaLok, Parker Autoclave Engineers SpeedBite or
service conditions, properties of reactants, pressure and temperature other swaged or bite-type connections are not recommended for ser-
cycling and age of the O-ring. FREQUENT INSPECTION SHOULD BE vice above 650F (343C) or below 0F (-17.8C). For such applica-
MADE to detect any deterioration, and O-rings replaced as required. tions, Parker Autoclave Engineers recommends its medium pressure
components with Parker Autoclave Engineers Medium Pressure
Note: coned-and -threaded connections, offering excellent thermal cycling
1. Optional graphite-yarn packing not recommended for hydrogen or capability.
helium service.
2. 40VM, 60VM and 60VRMM valves use Peak/PTFE/Peak for the 4. Pressure Limitations: Consult factory on 3/4 and 1 inch sizes.
PTFE glass option.

All general terms and conditions of sale, including limitations of our liability, apply to all products and services sold. 5
Pressure/Temperature Rating Curve: 316 SS & 304 SS

100%

90% CW Type 316 S.S. Before 800F (427C)

80%
This curve illustrates maximum working pressure for
70% Type 316 stainless steel tubing, valve and fitting bodies at
various temperatures to 1200F (649C) expressed as
% of Rated Pressure @ R.T.

a percentage of the R.T. pressure rating of the component.

60% Thus a component rated 10,000 psi (690 bar) @ R.T. would
be rated 9,000 psi (621 bar) @ 600F (316C), or 90% of
its rating.
50%

40%

30% CW Type 316 S.S. After 800F (427C)

20%

10%

0%
0 100 200 300 400 500 600 700 800 900 1000 1100 1200
(38) (93) (149) (204) (260) (316) (371) (427) (482) (538) (593) (649)
Temperature in F (C)
Note:
Curves and ratings presented here are average values for reference only, * Curve is valid for cold-worked Type 316 stainless steel components
and can be significantly affected by pressure and temperature character- as long as operating temperature does not exceed 800F (427C). When
istics of trim and packing materials. For unusual pressure/temperature exceeding this temperature, the cold worked effect is PERMANENTLY
requirements, please consult factory for recommended body, trim and altered, and the components should be considered as annealed material,
packing specifications. using 40% of its cold-worked rating for future operation of the compo-
For pressure temperature information on components supplied in materi- nents.
als other than Type 316 stainless steel, refer to pages 9-10.

Temperature Information Checklist

-423 to -100F -100 to 0F 0 to 650F 650 to 800F 800 to 1200F
(-253 to -73C) (-73 to -17.8C) (-17.8 to 343C) (343 to 427C) (427 to 649C)

Compression Type Not Not Not

Recommended Recommended
Connections Recommended Recommended Recommended

Coned-and-Threaded
Required Recommended Recommended Required Required
Connections

Required May be May be May be Required

Extended Stuffing
(Graphite-Yarn
Box (PTFE Packing)* Required** Required** Required**
Packing)
Packing temperature not to exceed 800F (427C) ** Extended stuffing box required for operation below -100F (-73C) and above 450F
* Packing temperature not to go below -100F (-73C) (232C) (with PTFE packing) or 600F (316C) (with PTFE glass packing).

For prompt service, Parker Autoclavce Engineers stocks select products. Consult factory.

6 All general terms and conditions of sale, including limitations of our liability, apply to all products and services sold.
Technical Information - Material vs. Pressure Rating
Parker Autocalve Engineers Valves, Fittings and Tubing
Valves & Fittings
Tube Material vs. Pressure Rating psi (bar) @ Room Temperature *
Valve Connection
Size
Series Type
(in.) 316CW (Std.) Hastelloy C276 Inconel 600 Inconel 625 Monel 400 Nickel 200 Titanium Gr2 Titanium 6AL4V
W125 1/8 15,000 (1034) 11,000 (758) 11,000 (758) 11,000 (758) 9,900 (683) 6,000 (414) 7,500 (531) 11,000 (758)
W250 1/4 15,000 (1034) 11,500 (793) 11,500 (793) 11,500 (793) 9,900 (683) 6,000 (414) 7,500 (531)) 11,500 (793)
10V
W375 3/8 15,000 (1034) 7,500 (517) 7,500 (517) 7,500 (517) 6,300 (434) 3,800 (262) 4,800 (331) 7,500 (517)
W500 1/2 10,000 (690) 5,500 (379) 5,500 (379) 5,500 (379) 4,600 (317) 2,700 (186) 3,400 (234) 5,500 (379)
SW250 1/4 15,000 (1034) 9,600 (662) 7,700 (531) 12,500 (862) 6,300 (434) 3,800 (262) 4,800 (331) 11,500 (793)
SW SW375 3/8 15,000 (1034) 7,500 (517) 7,500 (517) 7,500 (517) 6,300 (434) 3,800 (262) 4,800 (331) 7,500 (517)
SW500 1/2 10,000 (690) 5,500 (379) 5,500 (379) 5,500 (379) 4,600 (317) 2,700 (186) 3,400 (234) 5,500 (379)
SF562CX10 9/16 10,000 (690) 10,000 (690) 9,300 (641) 10,000 (690) 6,600 (455) 4,000 (276) 6,600 (455) 10,000 (690)
10SM SF70CX10 3/4 10,000 (690) 10,000 (690) 9,300 (641) 10,000 (690) 6,600 (455) 4,000 (276) 6,600 (455) 10,000 (690)
SF1000CX10 1 10,000 (690) 10,000 (690) 9,300 (641) 10,000 (690) 6,600 (455) 4,000 (276) 6,600 (455) 10,000 (690)
SF250CX 1/4 20,000 (1379) 12,200 (841) 9,300 (641) 15,000 (1034) 6,600 (455) 4,000 (276) 6,600 (455) 20,000 (1379)
SF375CX 3/8 20,000 (1379) 12,200 (841) 9,300 (641) 15,000 (1034) 6,600 (455) 4,000 (276) 6,600 (455) 20,000 (1379)
20SM SF562CX20 9/16 20,000 (1379) 12,200 (841) 15,000 (1034) 20,000 (1379)
SF750CX20 3/4 20,000 (1379) 12,200 (841) 15,000 (1034) 20,000 (1379)
SF1000CX20 1 20,000 (1379) 12,200 (841) 15,000 (1034) 20,000 (1379)
F250C 1/4 30,000 (2068) 22,400 (1544) 17,300 (1193) 22,500 (1551) 13,000 (896) 8,200 (565) 15,200 (1048) 30,000 (2068)
30VM F375C 3/8 30,000 (2068) 22,400 (1544) 17,300 (1193) 22,500 (1551) 13,000 (896) 8,200 (565) 15,200 (1048) 30,000 (2068)
F562C 9/16 30,000 (2068) 22,400 (1544) 17,300 (1193) 22,500 (1551) 13,000 (896) 8,200 (565) 15,200 (1048) 30,000 (2068)
40VM F562C40 9/16 40,000 (2758) 23,500 (1620) 18,400 (1269) 27,000 (1862) 13,800 (951) 8,700 (600) 16,200 (1117) 40,000 (2758)
F250C 1/4 60,000 (4137) 35,900 (2475) 27,700 (1910) 35,900 (2475) 20,800 (1434) 13,100 (903) 24,300 (1675) 60,000 (4137)
60VM F375C 3/8 60,000 (4137) 35,900 (2475) 27,700 (1910) 35,900 (2475) 20,800 (1434) 13,100 (903) 24,300 (1675) 60,000 (4137)
F562C 9/16 60,000 (4137) 35,900 (2475) 27,700 (1910) 35,900 (2475) 20,800 (1434) 13,100 (903) 24,300 (1675) 60,000 (4137)

* For ratings at elevated temperatures see P/T Rating Curves on pages 9 and 10. Tubing, connection type and/or packing material may limit maximum temperature rating.
See pages 5 and 6 for further temperature limitations.
uUse 10SM Series
Note: Hastelloy C276 values for SW are based on the valve ratings.

Tubing (Seamless) - Low Pressure**

Tubing Size Material vs. Pressure Rating psi (bar) @ Room Temperature *
Valve Outside x Inside
Series Diameter
Inches (mm) 316CW Hastelloy C276 Inconel 600 Inconel 625 Monel 400 Nickel 200 Titanium Gr2
1/16 x 0.026 15,000 15,000 15,000 15,000 11,500 7,100 11,500
(1.59 x 0.66) (1034.20) (1034.20) (1034.20) (1034.20) (792.88) (489.52 (792.88
1/8 x 0.052 15,000 15,000 15,000 15,000 12,000 7,200 12,000
(3.19 x 1.32) (1034.20) (1034.20) (1034.20) (1034.20) (827.36) (496.41) (827.36)
1/8 x 0.062 11,650 14,000 11,000 11,650 9,900 6,000 7,500
(3.19 x 1.57) (803.23) (965) (758.41) (803.23) (682.57) (413.68) (517.10)
Low Pressure

1/8 x 0.069 9,950 11,000 10,600 11,500 9,300 5,300 6,650

(3.19 x 1.75) (686.02) (758.41) (730.83) (792.88) (641.26) (365.42) (458.49)
1/8 x 0.085 6,850 7,750 7,300 10,000 6,400 3,650 4,450
(3.19 x 2.16) (472.28) (534.34) (503.31) (689.46) (441.26) (251.65) (306.81)
1/4 x 0.125 11,650 11,500 11,500 12,500 9,900 6,000 7,500
(6.35 x 3.18) (803.23) (792.88) (792.88) (861.83) (682.57) (413.68) (517.10)
1/4 x 0.180 5,450 6,650 6,300 9,000 5,500 3,150 3,900
(6.35 x 4.57) (375.76) (458.49) (434.36) (620.52) (379.21) (217.18) (268.89)
1/4 x 0.194 4,600 5,200 4,900 7,200 4,300 2,450 3,050
(6.35 x 4.93) (317.15) (358.52) (337.84) (496.41) (296.47) (168.92) (210.29)

Tubing (Seamless) - Low Pressure, continued on page 8

The tubing pressure rating in some instances is lower than the rating of the valve and Except low pressure series which is 316 annealed.
fitting. Tubing connection type and/or packing material may limit maximum temperature * For ratings at elevated temperatures see P/T Rating Curves on pages 9 & 10.
rating. See pages 5 & 6 for further temperature limitations. ** Except Hastelloy C276 which is welded and drawn or seamless.

All general terms and conditions of sale, including limitations of our liability, apply to all products and services sold. 7
Tubing (Seamless) - Low Pressure** - continued
Tubing Size Material vs. Pressure Rating psi (bar) @ Room Temperature *
Valve Outside x Inside
Series Diameter
Inches (mm) 316CW Hastelloy C276 Inconel 600 Inconel 625 Monel 400 Nickel 200 Titanium Gr2
3/8 x 0.195 10,000 10,000 10,000 7,500 8,800 5,300 6,600
(9.53 x 4.95) (689.46) (689.46) (689.46) (517.10) (606.73) (365.42) (455.05)
3/8 x 0.250 7,500 7,500 7,500 7,500 6,300 3,800 4,800
(9.53 x 6.35) (517.10) 517.10) (517.10) (517.10) (434.36) (262.00) (330.94)
Low Pressure

3/8 x 0.277 5,450 6,150 5,800 7,500 5,100 2,900 3,600

(9.53 x 7.04) (375.76) (424.02) (399.89) (517.10) (351.63) (199.942) (248.21)
3/8 x 0.305 3,800 4,250 4,000 5,000 3,500 2,100 2,500
(9.53 x 7.75) (262.00) (293.02) (275.79) (344.73) (241.31) (144.79) (172.37)
1/2 x 0.375 5,500 5,500 5,500 5,500 4,600 2,700 3,450
(12.70 x 9.53) (379.21) (379.21) (379.21) (379.21) (317.15) (186.16) (237.87)
1/2 x 0.402 4,000 4,500 4,250 5,000 3,700 2,100 2,650
(12.70 x 10.21) (275.79) (310.26) (293.02) (344.73) (255.10) (144.79) (182.71)

The tubing pressure rating in some instances is lower than the rating of the valve and Except low pressure sereis which is 316 annealed.
fitting. Tubing connection type and/or packing material may limit maximum temperature * For ratings at elevated temperatures see P/T Rating Curves on pages 9 & 10.
rating. See pages 5 & 6 for further temperature limitations. ** Except Hastelloy C276 which is welded and drawn or seamless.

Tubing (Seamless) - Medium Pressure

Tubing Size Material vs. Pressure Rating psi (bar) @ Room Temperature *
Valve Outside x Inside
Series Diameter
Inches (mm) 316CW Hastelloy C276 Inconel 600 Inconel 625 Monel 400 Nickel 200 Titanium Gr2
1/4 x 0.109 20,000 15,000 8,450 15,000 6,600 3,600 6,600
(6.35 x 2.77) (1378.93) (1034.20) (582.60) (1034.20) (455.05) (248.21) (455.05)
3/8 x 0.203 20,000 15,000 8,450 15,000 6,600 3,600 6,600
(9.53 x 5.16) (1378.93) (1034.20) (582.60) (1034.20) (455.05) (248.21) (455.05)
9/16 x 0.312 20,000 15,000 8,450 15,000 6,600 3,600 6,600
(14.29 x 7.92) (1378.93) (1034.20) (582.60) (1034.20) (455.05) (248.21) (455.05)
Medium Pressure

9/16 x 0.359 15,000 10,000 5,175 12,000 4,150 2,225 5,925

(14.29 x 9.12) (1034.20) (689.46) (356.80) (827.36) (286.13) (153.41) (408.51)
3/4 x 0.438 20,000 15,000 8,450 15,000 6,600 3,600 6,600
(19.05 x 11.13) (1378.93) (1034.20) (582.60) (1034.20) (455.05) (248.21) (455.05)
3/4 x 0.516 15,000 10,000 5,175 12,000 4,150 2,225 5,925
(19.05 x 13.11) (1034.20) (689.46) (356.80) (827.36) (286.13) (153.41) (408.51)
1.00 x 0.562 20,000 15,000 8,450 15,000 6,600 3,600 6,600
(25.40 x 14.27) (1378.93) (1034.20) (582.60) (1034.20) (455.05) (248.21) (455.05)
1.00 x 0.688 15,000 10,000 5,175 12,000 4,150 2,225 5,925
(25.40 x 17.48) (1034.20) (689.46) (356.80) (827.36) (286.13) (153.41) (408.51)

Tubing (Seamless) - High Pressure

(9.53 x 3.18) (4136.79) (1934.98) (1468.56) (2475.18) (1173.81) (629.14) (1675.40)

9/16 x 0.188 60,000 30,000 21,300 35,900 17,025 9,125 24,300
(14.27 x 4.78) (4136.79) (1934.98) (1468.56) (2475.18) (1173.81) (629.14) (1675.40)
9/16 x 0.250 40,000 23,000 15,400 27,000 11,000 6,600 17,600
(14.27 x 6.35) (2757.86) (1483.48) (1061.78) (1861.56) (758.41) (455.05) (1213.46)
1 x 0.438 43,000 23,000 15,900 28,000 11,300 6,800 18,200
(25.40 x 11.13) (2964.70) (1483.48) (1096.25) (1930.50) (779.10) (468.84) (1254.83)

8 All general terms and conditions of sale, including limitations of our liability, apply to all products and services sold.
Technical Information - Pressure vs. Temperature Rating Curves

Inconel 600
100

% of Room Temperature Rating

0
100 200 300 400 500 600 700 800 900 1000 1100 1200
(38) (93) (149) (204) (260) (316) (371) (427) (482) (538) (593) (649)

Temperature in F (C)

s Maximum Coincident Metal Temperature s Maximum Coincident Metal Temperature

Example: What would be the pressure rating of a 30VM 1/4 inch valve
constructed of Hastelloy C276 at 600F (316C)?
From the Material vs. Pressure rating chart on pages 7 & 8 for valves and
fittings, the maximum pressure rating for a 30VM 1/4 inch valve constructed
of Hastelloy C276 would be 22,400 psi (1544 bar).
To determine the approximate pressure rating at 600F (316C), the Pressure
vs. Temperature Rating Curves will be used. A vertical line on the x-axis
(Temperature) is traced at 600F (316C) [on the Hastelloy C276 graph], until
it intersects the curve. A horizontal line is then drawn to the y-axis (% of rated
pressure @ RT) and read as 93%. The room temperature rating of the
Hastelloy C276 valve is multiplied by the temperature reduction factor (.93)
22,400 psi (1544 bar) to approximate the temperature corrected pressure of
20,800 psi (1434 bar).
See page 5 for further packing temperature limitations.

s Maximum Coincident Metal Temperature

Curves and ratings presented here are average values for reference only and
can be significantly affected by pressure and temperature characteristics of
trim materials, stem packing materials (or o-rings), and connection type.
Other options such as an extended stuffing box will be required to achieve
the maximum temperature rating. See pages 5 and 6 for further temperature
limitations. For unusual pressure/temperature requirements, please consult
factory for recommended body, trim and packing specifications.
To obtain the maximum pressure rating at an elevated temperature, multiply
the maximum pressure rating of the item (in special material) at room
temperature, by the elevated temperature factor (% of RT).

All general terms and conditions of sale, including limitations of our liability, apply to all products and services sold. 9
Technical Information - Pressure vs. Temperature Rating Curves

Nickel 200 Titanium Grade 2

100 100

90 90
% of Room Temperature Rating

% of Room Temperature Rating

80 80

70 70

60 60

50 50

40 40

30 30

20 20

10 10

0 0
100 200 300 400 500 600 700 800 900 1000 1100 1200 100 200 300 400 500 600 700 800 900 1000 1100 1200
(38) (93) (149) (204) (260) (316) (371) (427) (482) (538) (593) (649) (38) (93) (149) (204) (260) (316) (371) (427) (482) (538) (593) (649)

Temperature in F (C) Temperature in F (C)

s Maximum Coincident Metal Temperature s Maximum Coincident Metal Temperature

Titanium 6AL4V Monel 400

100 100

90 90
% of Room Temperature Rating

% of Room Temperature Rating

80 80

70 70

60 60

50 50

40 40

30 30

20 20

10 10

Temperature in F (C) Temperature in F (C)

s Maximum Coincident Metal Temperature s Maximum Coincident Metal Temperature

Curves and ratings presented here are average values for reference only and Example: What would be the pressure rating of a 30VM 1/4 inch valve
can be significantly affected by pressure and temperature characteristics of constructed of Titanium Grade 2 at 600F (316C)?
trim materials, stem packing materials (or o-rings), and connection type. From the Material vs. Pressure rating chart on pages 7 & 8 for valves and
Other options such as an extended stuffing box will be required to achieve fittings, the maximum pressure rating for a 30VM 1/4 inch valve constructed
the maximum temperature rating. See pages 5 and 6 for further temperature of Titanium Grade 2 would be 15,200 psi (1048 bar).
limitations. For unusual pressure/temperature requirements, please consult To determine the approximate pressure rating at 600F (316C), the Pressure
factory for recommended body, trim and packing specifications. vs. Temperature Rating Curves will be used. A vertical line on the x-axis
To obtain the maximum pressure rating at an elevated temperature, multiply Temperature) is traced at 600F (316C) [on the Titanium Grade 2 graph],
the maximum pressure rating of the item (in special material) at room tem- until it intersects the curve. A horizontal line is then drawn to the y-axis
perature, by the elevated temperature factor (% of RT). (% of rated pressure @ RT) and read as 44%. The room temperature rating
of the Titanium Grade 2 valve is multiplied by the temperature reduction factor
(.44) 15,200 psi (1048 bar) to approximate the temperature corrected pressure
of 6,688 psi (461 bar).
See page 5 for further packing temperature limitations.

10 All general terms and conditions of sale, including limitations of our liability, apply to all products and services sold.
Technical Information - Flow Calculations
Liquids & Gases

Coefficient of flow (Cv) for a valve is the volume of water, in Flow Formulas
U.S gallons per minute at room temperature, which will flow
through the valve with the stem fully open with a pressure Liquids
drop of 1 psi (.069 bar) across the valve. Cv is the valve sizing Flow, U.S. gal./min.
factor that permits selection of the appropriate valve to meet V = Cv P1 - P2
flow requirements of a given fluid system
SGF
The flow capacity curves presented in the ordering pages for
each series of Parker Autoclave Engineers valves show the Cv Flow, lb./hr.
for all series, sizes and stem types per number of turns of the V = 500 Cv (P1 - P2) /SGF
stem. These curves also illustrate the relative flow patterns for
a vee on-off stem and a regulating stem. Gases
Flow, SCFH
The Cv values shown on the valve ordering pages represent *
the full-open Cv for that valve. In determining estimated capac- Q = 42.2 Cv (P1 - P2) (P1 + P2)
ity, this Cv value should be used in the formulas which follow. SGF
Flow, SCFH (temperature corrected)

Q = 963 Cv (P1 - P2) (P1 + P2)
SG TF

Flow, lb./hr.

W = 3.22 Cv (P1 - P2) (P1 + P2)/ SG

Saturated Steam
Flow, lb./hr.

W = 2.1 Cv (P1 - P2) (P1 + P2)

Super Heated Steam

Flow, lb./hr.

W = 2.1 Cv (P1 - P2) (P1 + P2)
(1 + 0.0007 TS)

Formula Nomenclature

For 2 way angle patterns, increase Cv value 50% V = Flow, U.S. gallons per minute (GPM)
Q = Flow, standard cu.ft. per hr. (SCFH)

Specific Gravity (Sg) Specific Gravity (Sgf) W = Flow, pounds per hour (lb./hr.)
Typical Gases Typical Liquid P1 = Inlet pressure, psia (14.7 + psig)
P2 = Outlet pressure, psia (14.7 + psig)
SG@RT SGF@RT
Gas Relative Liquid Relative Sgf = Liquid specific gravity (water = 1.0)
to Air to Water
Sg = Gas specific gravity (air = 1.0)
Acetylene 0.897 Acetone 0.792 Tf = Flowing temp., R absolute (460 + F)
Air 1.000 Alcohol 0.792
Benzine 0.902 Ts = Superheat in F
Ammonia 0.587
Argon 1.377 Gasoline 0.751 Cv = Valve coefficient of flow, full open
Butane 2.070 Gasoline, nat. 0.680
* Effect of flowing temperatures on gas flow are minimal for temperatures between 30F
Carbon Dioxide 1.516 Kerosene 0.815
(-1.1C) and 150F (66C). Correction should be included if temperatures are higher or
Ethylene 0.967 Pentane 0.624 lower.
Helium 0.138 Water 1.000
Hydrogen 0.0695 Where outlet pressure P2 is equal to or less than 1/2 inlet pressure P1, the term:
Methane 0.553
(P1 - P2) (P1 + P2) becomes 0.87 P1
Nitrogen 0.966
Oxygen 1.103 Note: Maximum Cv values in this catalog have been determined in accordance with the Fluid Controls
Institute report FCI58-2. Recommended Voluntary Standards for Measurement Procedure for
Propane 1.562 Determining Control Valve Flow Capacity, including procedure, design of the test stand and evaluation
Sulphur Dioxide 2.208 of the data.

All general terms and conditions of sale, including limitations of our liability, apply to all products and services sold. 11
Technical Information - Liquid Flow Curves
Tubing

Theoretical Pressure Drop & Fluid Velocity vs. Flow, total pressure loss. See note below to correct for system
Parker Autoclave Engineers Medium and High Pressure Tub- pressures above atmospheric. To determine the average fluid
ing. (Based on water @ RT) velocity, repeat the above procedure, but use the dashed line.
The pressure drop is for straight lengths of tube only.
Legend Pressure drop P = psi/ft. (bar/m)
Velocity V = Ft./s (m/s) 50
(11.30) .188
.109 (4.76)
[15.24]
(2.77)
50 .062 .109
.203
(11.30) (5.16)
.062 (1.51) (2.77)
[15.24] (1.51) .083 .125 Pressure Drop 40
(2.11) (3.17) (9.04)
Unit Length [12.19]
Pressure Drop 40 P = psi/ft. (bar/m)
(9.04)
Unit Length [12.19] Velocity 30
.125
P = psi/ft. (bar/m) (3.17) V = ft./s [m/s] (6.78)
Velocity [9.14] .188
30 (4.76) .203
V = ft./s [m/s] (6.78) (5.16)
[9.14] 20
.083 (4.52)
(2.11) [6.09]
20
(4.52)
[6.09] 10
(2.26)
[3.04]
10
(2.26) Use this set of curves
[3.04] for .109, .188 and .203
Use this set of curves inch (2.77, 4.76, & 1 2 3 4 5
for .062, .083 and .125 5.16 mm) inside (3.5) (8.8) (13.2) (17.6) (22.0)
inch (1.25, 2.11 & 3.17 .5 1.0 1.5 2.0 diameter tubing.
mm) inside diameter (2.2) (3.5) (6.6) (8.8) Flow Q GPM (LPM)
tubing.
Flow Q GPM (LPM)
50
(11.30)
[15.24] .516
50 .562 .688
(13.11) (14.27)
(11.30) .359 (17.48)
[15.24] .250 (9.12)
.438 Pressure Drop 40
(6.35) (9.04)
(11.13) Unit Length [12.19]
Pressure Drop 40 P = psi/ft. (bar/m)
(9.04) .312
Unit Length [12.19] (7.92) Velocity 30
P = psi/ft. (bar/m) V = ft./s [m/s] (6.78)
[9.14]
Velocity 30
V = ft./s [m/s] (6.78)
[9.14] 20
(4.52)
[6.09]
20
(4.52) .250 .516
(6.35) (13.11)
[6.09]
.312 10
(2.26) .562
(7.92) (14.27)
[3.04]
10 .688
(2.26) .359 Use this set of curves (17.48)
[3.04] (9.12) .438 for .516, .562 and .688
Use this set of curves (11.13) inch (13.11, 14.27, & 10 20 30 40 50 60
for .250, .312, .359 and 17.48 mm) inside (44.0) (88.1) (132.1) (176.2) (220.2) (264.3)
.438 inch (6.35, 7.92, 5 10 15 20 diameter tubing.
9.12 & 11.13 mm) (22.0) (44.01) (66.1) (88.1) Flow Q GPM (LPM)
inside diameter tubing.
Flow Q GPM (LPM)
Example: What would be the expected pressure drop and average fluid
velocity at 1 gallon (4.4 liter) per minute of water through 100 feet (30.48
60
meters) of 3/8 outside diameter x .125 inside diameter tubing at 30,000
System pressure KSI (MPa)

(413.8)
50 psi (2068 bar) will be used. This curve lists .125 inch (.317mm) inside
(344.9) diameter data.
40
(275.9) From the x-axis (Flow Q GPM (LPM) at 1 GPM (3.5 LPM) a vertical line
30 is drawn until it intersects the solid line labeled .125 (3.17mm).
(206.9)
20 A horizontal line is then traced to the y-axis )Pressure Drop/Unit Length)
(138.0) and is read 12 psi/ft. (2.71 bar/m).
10
(69.0) Since the system pressure is 30,000 psi (2068 bar), a correction must
1.00 1.02 1.04 1.06 1.08 1.10 be made to this value 12 psi/ft. (2.71 bar/m). The small graph in the
lower left corner is used to determine this correction factor. A horizontal
Compressibility Correction Factor 'C'
line on this graph is drawn from the y-axis System Pressure KSI (MPa)
Note: Multiply pressure drop (P/ft) from graph above by factor C to correct for sys- until it intersects the curve. It is then traced vertically to the x-axis
tem pressure above atmospheric. Higher system pressure increases the fluid density (Compressibility Correction Factor C) and is read as 1.054.
resulting in higher system pressure loss.
To determine the total pressure drop, multiply the total tube length by the
Instructions: To determine the expected pressure drop, per expected pressure drop per foot and by the correction factor C (100)
foot of tube length, select the appropriate curves based on (12) (1.054) = 1,265 psi [(30.48m)(2.71 bar/m) (1.054)=87.10 bar].
tube Inside Diameter. Follow the graph vertically at the design The average fluid velocity is determined in a similar way except that on
flow rate (X-axis) until it intersects the solid line, then move the original graph, the dashed line is used instead of the solid line. the
average fluid velocity at 1 GPM (4.4 LPM) would be 25 ft/s (7.62 m/s).
horizontally to read the expected pressure drop per foot No correction needs to be made for elevated system pressures.
(Y-axis). Multiply this by the total tube length to obtain the

12 All general terms and conditions of sale, including limitations of our liability, apply to all products and services sold.
Technical Information - Conversion Tables

Temperature Equivalents
Degrees Fahrenheit = F
Fahrenheit F Celcius C RankineR KelvinK
Degrees Celcius = 5/9 (F - 32)
0 -18 460 255 Degrees Kelvin = C + 273.15
32 0 492 273
Degrees Rankine = F + 459.67
-460 -273 0 0

Linear Equivalents
foot inch meter centimeter millimeter micron angstrom
1 12 0.3048 30.48 304.800 3.048x105 3.048x109
0.08333 1 0.0254 2.54 25.4 2.54x104 2.54x108
3.28083 39.37 1 100 1000 1x106 1x1010
0.03281 0.3937 0.01 1 10 1x104 1x108
3.281x10-3 0.03937 0.001 0.1 1 1000 1x107
3.281x10-6 3.937x10-5 1x10-6 1x10-4 1x10-3 1 1x104
3.281x10-10 3.937x10-9 1x10-10 1x10-8 1x10-7 1x10-4 1

Pressure Equivalents
PSIG = lb./in.2 Gage
Pa MPa atm bar kg/cm2 psi inches Hg Microns Hg
PSIG = lb./in.2 absolute
1 1x10-6 9.8692x10-6 1x10-5 1.0197x10-5 1.4504x10-4 2.9530x10-4 7.50059 PSIA = PSIG plus atmospheric pressure
1x10-6 1 9.8692 10 10.1971 145.04 295.30 7.5006x106
1Torr = 133.322Pa
101325 0.101325 1 1.01325 1.0332 14.696 29.921 760x103

100000 0.1 0.98692 1 1.01971 14.504 29.53 750.059x103

98066.5 0.098067 0.96784 0.98067 1 14.223 28.959 735.56x103
6894.757 6.8948x10-3 0.06805 0.06895 0.07031 1 2.036 51.715x106
3386.389 3.3864x10-3 0.03342 0.03386 0.03453 0.49116 1 2.54x104
0.133322 1.3332x10-7 1.3158x10-6 1.3332x10-6 1.3595x10-6 19.337x10-6 39.37x10-6 1

Volume Equivalents
US. gallon = 0.833 British Imperial gallon
meter3 foot3 gallon* liter quart inch3 cc
British Imperial gallon = 1.201 US. gallon
1 35.31 264.2 1000 1056.8 61023 1x106
US. gallon water = 8.345 pounds
28.317x10-3 1 7.4822 28.317 29.92 1728 28.317x103
3.785x10-3 0.1337 1 3.785 4 231 3785 British Imperial gallon water= 10.022
pounds
1x10-3 0.03531 0.2642 1 1.057 61.023 1000
9.463x10-4 0.03342 0.25 0.9463 1 57.75 946.25 US. fluid ounce = 29.573 centimeters3
1.638x10-5 5.787x10-4 43.29x10-4 0.01639 0.01732 1 16.387 British Imperial fluid ounce = 28.413
1x10-6 35.31x10-6 2.642x10-4 1x10-3 10.568x10-4 0.06102 1 centimeters3
*U.S. Gallons
Density Equivalents
pound/inch3 pound/ft3 kg/meter* pound/gallon3 gram/cm3
1 1728 231 27.68x103 27.6797
5.787x10-4 1 0.1337 16.018 0.01602
4.33x10-3 7.48 1 119.8257 0.11983
3.613x10-5 0.06243 8.3445x10-3 1 .001
0.03613 62.43 8.3445 1000 1
*U.S. Gallons
Fluid Flow Equivalents
*gal/hr *gal/min cu ft/hr cu ft/min liters/hr liters/min cc/min
1 0.01667 0.1337 2.228x10 -3
3.7848 0.06308 63.08
60 1 8.022 0.1337 227.1 3.7848 3784.8
7.48 0.1247 1 0.01667 28.32 0.472 472
448.8 7.48 60 1 1698.6 28.32 28.32x103
0.26418 4.403x10-3 0.03531 5.886x10-4 1 0.01667 16.67
15.8502 264.18x10-3 2.11887 0.03531 60 1 1000
.01585 264.2x10-6 2.1187x10-3 35.3145x10-6 .06 0.001 1
*U.S. Gallons

All general terms and conditions of sale, including limitations of our liability, apply to all products and services sold. 13
Technical Information - Conversion Tables

Area Equivalents
ft2 in2 m2 cm2 mm2
1 144 0.09291 929.034 9.29x104
6.944x10-3 1 6.451x10-4 6.4516 645.1625
10.7639 1550 1 1x10-4 1x106
1.0764x10-3 0.155 1x10-4 1 100
1.076x10-5 1.55x10-3 1x10-6 .01 1

Weight Equivalents
pound ounce kilogram gram grain
1 16 .45351 453.592 7000
0.0625 1 .02836 28.345 437.5
2.205 35.27 1 1000 15.435x103
2.205x10-3 0.03527 0.001 1 15.435
1.428x10-4 0.002285 64.8x10-6 0.0648 1

Power Equivalents
US. horsepower = 1.014 metric horse-
kilowatt horsepower* ft lbs/sec ft lbs/min ft lbs/hr Btu/sec Btu/min Btu/hr power
1 1.341 738 44.280 2.653x106 0.948 56.9 3413 Metric. horsepower = 0.986 US. horse-
.7457 1 550 33x103 1.99x106 0.707 42.41 25.44 power
13.55x10-4 18.18x10-4 1 60 3600 12.84x10-4 0.0771 4.62

22.59x10-6 0.303x10-4 0.01667 1 60 21.41x10-6 12.84x10-4 0.0771

0.376x10-6 0.505x10-6 2.78x10-4 0.01667 1 0.357x10-6 21.41x10-6 12.84x10-4
1.055 1.416 778 46.7x103 2.802x10-6 1 60 3600
0.01759 0.02359 12.98 778 46.7x103 0.01667 1 60
2.925x10-4 3.933x10-4 0.2163 12.98 778 2.778x10-4 0.01667 1
*U.S. Horsepower
Work or Energy Equivalents
kilowatt- horsepower* foot- inch- Btu kilogram- kilogram- joules
hours hours pounds pounds meters calories Newton meters

1 1.342 2.655x106 31.86x106 3415 367.1x103 860.238 3.6x106

.7457 1 1.98x106 23.76x106 2546.5 273.546x103 641.477 2.685x106
0.376x10-6 0.505x10-6 1 12 1.286x10-3 0.13826 3.239x10-4 1.3562
0.313x10-7 0.458x10-7 0.08333 1 0.107x10-3 11.522x10-3 0.27x10-4 0.11302
2.928x10-4 3.929x10-4 778 9336 1 107.5 0.2519 1054.8
2.717x10-6 3.653x10-6 7.233 86.796 9.302x10-3 1 23.43x10-4 9.804
1.161x10-3 1.558x10-3 3088.26 37059.12 3.9683 427.32 1 4189.48
2.774x10-7 3.7229x10-7 0.7373 8.8476 9.478x10 -4
0.10194 2.39x10-4 1
*U.S. Horsepower
Velocity Equivalents
Statute mile/hour = .8684 knot
cm/sec meter/sec meter/min kilometer/hr feet/sec feet/min mile/hr
Knot = 1.1516 mile/hour = 1.689 feet/
1 0.01 0.6 0.036 0.03281 1.9685 0.02237 second
100 1 60 3.6 3.281 196.85 2.2369 1 Statue Mile = 5280 feet
1.667 0.01667 1 0.06 0.05468 3.281 .03728
1 Nautical Mile = 6076 feet
27.78 0.2778 16.67 1 0.91134 54.681 0.62137
30.48 0.3048 18.29 1.0973 1 60 0.68182
0.508 508x10-3 0.3048 0.01829 0.01667 1 0.01136
44.704 0.44704 26.82 1.6093 1.4667 88 1

14 All general terms and conditions of sale, including limitations of our liability, apply to all products and services sold.
Technical Information - Pressure vs. Bend Radius
Tubing
Allowable Pressure vs. Bend (Mandrel) Radius
Parker Autoclave Engineers Medium & High Pressure tubing
(316 & 304 SS)
60,000 60,000 and 100,000 psi (4137 & 6895 bar)
(41.4) High Pressure Tubing Mandrel radius
(Rm)
Size Rm (min.)
59,000 60,000 psi (4137 bar) Inches inches (mm)
(40.7) high pressure tubing 1 1/4 x .083 1.25 (31.8)
1 2 3/8 x .125 1.75 (44.5)
58,000 3 9/16 x .188 2.625 (66.7)
(40.0) 2 3

43,000 43,000 psi (2965 bar)

(29.6) High Pressure Tubing
42,000
MAWP psi x (bar x 100) @ RT

Size Rm (min.)
(29.0) Inches inches (mm)
41,000 43,000 psi (2965 bar) 1 x .438 4.625 (117.5)
(28.3) high pressure tubing
40,000 40,000 psi (2758 bar)
(27.6) High Pressure Tubing
Size Rm (min.)
39,000 Inches inches (mm)
(26.9) 1 9/16 x .250 2.625 (66.7)
1
40,000 psi (2756 bar) 2 9/16 x .312
2 high pressure tubing
20,000 psi (1379 bar)
Medium Pressure Tubing
20,000
(13.8) Size Rm (min.)
1 Inches inches (mm)
19,000 1 1/4 x .109 1.25 (31.8)
2 20,000 psi (1379 bar) 2 3/8 x .203 1.75 (44.5)
(13.0) 3 4 5 medium pressure tubing 3 9/16 x .312 2.625 (66.7)
4 3/4 x .438 3.5 (89.9)
5 1 x .562 4.625 (117.5)
15,000
15,000 psi (1034 bar)
(1034) 1 Medium Pressure Tubing
15,000 psi (1034 bar) Size Rm (min.)
14,000 2 3 medium pressure tubing Inches inches (mm)
(9.6)
1 9/16 x .359 2.625 (66.7)
0 1 2 3 4 5 6 9 10 11 12 13 14
7 8 2 3/4 x .516 3.5 (89.9)
Mandrel Radius (inches) 3 1 x .688 4.625 (117.5)
4 1 1/2 x .938 4.50 (114.3) (Curved not shown)
Parker Autoclave Engineers Ultra High Pressure tubing (316SS)
MAWP psi x 1000 (bar x 1000)@ RT

150,000 psi (10342 bar)

150 Ultra High Pressure Tubing
(10.34)
Size Rm (min.)
149
(10.27) Inches inches (mm)
148 5/16 x 1/16 6 (152.4)
(10.20) 150,000 psi tubing
147
(10.13) (10342 bar)
146
(10.06)
145 0 2 4 6 8 10 12 14 16 18 20 22 24 26 28
(9.99)
Mandrel Radius (inches)

All general terms and conditions of sale, including limitations of our liability, apply to all products and services sold. 15
WARNING
FAILURE, IMPROPER SELECTION OR IMPROPER USE OF THE PRODUCTS AND/OR SYSTEMS DESCRIBED HEREIN OR RELATED ITEMS CAN CAUSE DEATH, PERSONAL INJURY AND PROPERTY DAMAGE.
This document and other information from Parker Hannifin Corporation, its subsidiaries and authorized distributors provide product and/or system options for further investigation by users having technical
expertise. It is important that you analyze all aspects of your application and review the information concerning the product or system in the current product catalog. Due to the variety of operating conditions
and applications for these products or systems, the user, through its own analysis and testing, is solely responsible for making the final selection of the products and systems and assuring that all performance,
safety and warning requirements of the application are met. The products described herein, including without limitation, product features, specifications, designs, availability and pricing, are subject to change by
Parker Hannifin Corporation and its subsidiaries at any time without notice.

Offer of Sale
The items described in this document are available for sale by Parker Hannifin Corporation, its subsidiaries or its authorized distributors. Any sale contract entered by Parker will be governed by the provisions
stated in Parker's standard terms and conditions of sale (copy available upon request).

2013 Parker Hannifin Corporation | Autoclave Engineers is a registered trademark of the Parker Hannifin Corporation 02-0142SE January2013

Caution! Do not mix or interchange parts or tubing with those of

other manufacturers. Doing so is unsafe and will void warranty.

For reliable operation and long life of hand valves, air valves, relief valves, check valves and safety heads,
Autoclave Engineers strongly recommends proper lubrication of all components that are subject to friction dur-
ing assembly and /or operation. This is especially important where metal to metal contact occurs such as on
connection gland threads, packing gland threads and stem threads. Without proper lubrication, the high loads
imposed on these threads may cause the parts to weld (or gall) together from the high metal to metal contact
forces and friction heat. Lubrication is also essential for the effective sealing and long life of o-rings, especially
those that are used in dynamic sealing applications. The performance of metal to metal seals will be improved
with lubrication but, they do not absolutely require it.

Lubricant selection is strongly dependent on the application of the given component. Process fluids, fluid tem-
perature, ambient environment temperature, materials and other factors are important in selecting a lubricant.
This manual gives some basic guidelines in the proper selection and application of lubricants. The end user
must ultimately determine the suitability of a lubricant based on process requirements.

Note: Autoclave Engineers assumes no liability in selecting lubricant for customer applications.

Autoclave Engineers reserves the right to alter the specifications

given in this publication in line with our policy of continuous improve-
ment.

All general terms and conditions of sale, including limitations of our

liability, apply to all products and services sold.

Caution: While testing has shown o-rings to provide satisfactory

service life, both cyclic and shelf life may vary widely with differing
service conditions, properties of reactants, pressure and temperature
cycling, and age of the o-ring. Frequent inspection should be made
ISO-9001 Certified to detect any deterioration and o-rings replaced as required.
Lubrication Sites

1. Speedbite, Slimline and High Pressure

Connections in all valves and fittings - Prior to
assembly, the connection gland should be Metal to Metal
lubricated on the threads and on the area that is Lubricant
in contact with the sleeve or collar. AE provides as
standard a dry molybdenum disulfide lubricant on
Speedbite glands unless specified otherwise. If
process tolerable, a small amount of any lubricant
(or process fluid) on the end of the tube cone or
connection sleeve will help to maximize the metal-
to-metal sealing process. This inherently provides
for better sealing of gases.

2. Hard Valves - Ideally, the non-rotating stem

should be lubricated along the shank that fits into Metal to Metal
the threaded stem sleeve as well as on the surfac- Lubricant
(If not MoS2
es that are in contact with the stem washers. The {dry} film coated)
threaded stem sleeve should be lubricated on the
stem threads and at the ends (see Figure 1). The
packing gland should be lubricated on the external
threads and on the end that is in contact with the
packing washer. For valves with replacement seats,
the external threads on the seat retainer and the Metal to Metal
Seal Surface
portion of the seat retainer in contact with the seat Lubricant
should be lubricated.
Figure 1
3. Air Valves - The packing gland and seat Hand Valve
retainer (if the valve has a replaceable seat) should Lubrication Sites
be lubricated in the same manner as the hand
valve. Threads should also be lubricated on all of
the yoke screws (for yoke style valves) and on the For piston type air operators, o-ring lubricant should
retainer insert (on other air operated valves). be applied to the inside of the operator housing, on
the center rod and on all the o-rings, on the pistons
and divider plates. On air-to-open diaphragm
operators, the o-ring on the stem should be lubricat-
ed. The threads and end of the spring adjustment
Metal to Metal screw should be lubricated on all air-to-open valves.
Lubricant Refer to Figure 2 and 3 for lubrication sites on piston
and diaphragm style operators.

4. Check Valves - The gland nut should be

lubricated on the external threads and at the end
O-ring where it contacts the cover. The cover should be
Lubricant lubricated at the sealing surface where it contacts
the body. For o-ring check valves, a small amount of
o-ring lubricant on the o-ring will help swell the elas-
tomer and aid sealing. Refer to Figure 4 for lubrica-
tion sites on check valves.

5. Relief Valves - Threads should be lubricated on

the cap, spring cylinder, adjustment bolt and on the
seat gland. Refer to Figure 5 for lubrication sites on
the relief valve.

6. Safety Heads - The threads and end of the hold

down nut should be lubricated. Refer to figure 6 for
lubrication sites on the safety head.

For any part not covered in the above statements,

Figure 2 the general rule is that parts that will move against
Air Valve Piston each other during assembly or operation should be
Lubrication Sites lubricated at the points/areas of contact.
Recommended Lubricants

Note: This information is provided for reference only. The manufacture of the lubricant should be contacted for
specific information based on your application. Refer to the material safety data sheets for information on safe
usage and storage methods for these lubricants.

3. DuPont Krytox 240AC2 - Krytox is a non-flam-

mable fluorinated grease used for metal to metal
lubrication in valves that are cleaned and desig-
nated for oxygen service. It comes in the form of
Metal to Metal
a white grease and has a recommended absolute
Lubricant service temperature range of -15 to 500F.

4. Hallocarbon 25-5S - This is a silica thickened

chlorotrifluorethylene grease that is recommended
for use on check valve balls and o-rings. It is not
recommended for use on magnesium and
aluminum alloys and in contact with sodium
potassium, amines, liquid flurine and liquid chlorine
trifluoride. It has a recommended absolute service
temperature range of 0 to 350F.

5. Neolube DAG 1563 - This is a dry film lubricant

for valves used in Navy Nuclear service. It consists
of graphite particles in a thermoplastic resin and
O-ring ispropanol and meets Military Specification
Metal to Metal Lubricant MIL-L-24131B. The dry film form allows tight
Lubricant control of impurities that are required for these
applications. It has an absolute service temperature
of -100 to 400F.

6. Dow Corning Molycoat 55M4 - This grease is

used for dynamic lubrication between rubber and
metal parts in pneumatic systems such as piston
Figure 3 style air operators. It is a silicone based lubricant
Air Valve (Diaphragm)
Lubrication Sites
and meets Military Specifications MIL-G-4343. It is
not recommended for use on silicone rubber o-rings
and seals. It has a recommended absolute service
1. Jet Lube SS-301 - This lubricant consists of pure temperature range of -85 to 350F.
copper flakes that are homogenized into a non-
melting, nonvolatile viscous carrier. It is fortified
with anti-oxidants, rust and corrosion inhibitors. Jet
Lube SS-30 is the standard lubricant for Autoclave
VFT components with sliding metal to metal con- Metal to Metal
tact surfaces. The surfaces are copper coated and Lubricant
prevents seizure, galling and heat freeze. SS-30
comes in the form of a thick oil that can be eas-
ily brushed on the surfaces to be lubricated. The
absolute service temperature range is form 0 to
1800F. Jet Lube SS-30 is not recommended for
extreme low temperature applications or processes
that will not tolerate the presence of copper.
O-ring
2. Jet Lube MP-50 Moly Paste1 - This is a thick Lubricant
paste that contains molybdenum disulfide (MoS).
This lubricant is suitable for preventing seizure and Figure 4
Check Valve
galling of parts at absolute temperatures of -300F Lubrication Sites
to 750F. It is recommended for metal to metal
components that are exposed to temperatures of
less than 0F. Other lubricants may solidify under
these conditions and prevent the effective opera-
tion of dynamic components.
Services
For service, contact the Autocalve Engineers Representative in you area, or FAX Autoclave Engineers Cus-
tomer Support Services at 1-814-860-5703.

Metal to
Metal to Metal Metal Lubricant
Lubricant

Metal to Metal
Seal Surface Lubricant
Figure 5 Figure 6
Relief Valve Safety Head
Lubrication Sites Lubrication Sites

Lubricant Selection Chart

Lubricant Application Absolute Service

Temperature Range
Jet-Lube SS-30 Metal to Metal, Standard Application 0F to 1800F (-18C to 982C)
Jet-Lube Moly Paste MP-50 Metal to Metal, Low Temperature Application -300F to 750F (-185C to 398C)
Krytox 240 AC Metal to Metal, Oxygen Clean Components -15F to 500F (-26C to 260C)
Hallocarbon 25-5S Check Valve Ball and Poppet Lubricant 0F to 350F (-18C to 177C)
Neolube DAG 156 Metal to Metal, Nuclear Service -100F to 400F (-73C to 204C)
Dow Corning M55 Dynamic O-ring Seals -85F to 350F (-65C to 177C)

Notes: Specific applications may require other service temperature ranges.

1
SS-30 and MP-50 Moly Paste are registered trademarks of Jet Lube Inc.
2
Krytox is a registered trademark of E.I.duPont de Nemours & Co., Inc.
3
DAG is a registered trademark of Acheson Industries, Inc.
4
Molycoat and Dow Corning are registered trademarks of Dow Corning Corp.

All general terms and conditions of sale, including limitations of our liability, apply to all products and services sold.
! WARNING !
FAILURE OR IMPROPER SELECTION OR IMPROPER USE OF THE PRODUCTS AND/OR SYSTEMS
DESCRIBED HEREIN OR RELATED ITEMS CAN CAUSE DEATH, PERSONAL INJURY AND/OR PROPERTY DAMAGE.

This document and other information from Snap-tite, Inc., its subsidiaries and authorized distributors, provides product and/or system options for further investigation by users having technical expertise. It is important that you analyze all
aspects of your application and review the information concerning the product or system in the current product catalog. Due to the variety of operation conditions and applications for these products or systems, the user, through its own
analysis and testing, is solely responsible for making the final selection of the products and systems and assuring that all performance, safety and warning requirements of the application are met. The products described herein, including
without limitation, product features, specifications, designs, availability and pricing, are subject to change by Snap-tite, Inc. and its subsidiaries at any time without notice.

Industrial Estate
Whitemill-Wexford 8325 Hessinger Drive
ISO-9001 Certified Republic of Ireland
PH: 353-53-41566 FAX: 353-53-41582
Erie, Pennsylvania 16509-4679 USA
PH: 814-838-5700 FAX: 814-838-5811
e-mail: ste_sales@snap-tite.com e-mail: ae_sales@snap-tite.com
02-0027BE-0304 www.snap-tite.com www.autoclaveengineers.com
This page left blank

2
QSS-Quick Set System
Index
QSS Introduction................................... 4-5

QS Valves........................................... 7-9
1/4", 3/8", 9/16" and 3/4", Pressures to 15,000 psi (1034 bar)

QS Ball Valves and Actuators................. 11-30

2 and 3 Way Ball Valves

QS Fittings and Tubing......................... 31-36

1/4", 3/8", 9/16" and 3/4", Pressures to 15,000 psi (1034 bar)
Elbows, Tees, Crosses, Couplings and Bulkhead Adapters
Tubing and Nipples
Check Valves

QS Adapters..................................... 37-43
Male to Female

QSS Tools, Installation, Operation and

Maintenance.................................... 44-47
QSS Assembly Procedure
Hydraulic Sleeve Set Tool

QSS - Index

3
QSS-Quick Set System
Safe, Reliable, Cost Effective
Parker Autoclave Engineers, the recog-
nized world leading designer and manu-
facturer of high pressure equipment up to
150,000 psi (10342 bar), has engineered
an advanced single ferrule fitting system
called the QSS-Quick Set System. This
1/4 through 3/4 O.D. heavy-walled, high
flowing tubing system operates in all sizes
up to 15,000 psi (1034 bar).

The single compression sleeve design will

provide leak free, vibration resistant ser-
vice from 0 to 650F (-17.8 to 343C).
Its design reduces the risk of lost parts
and incorrect installation common with
the more complex 2-ferrule conceptions
and is much easier to handle, reducing
assembly errors.

In certain applications, this ferrule style

fitting may be an advantage for your
installation. With only a wrench needed
for the smaller sizes and a hydraulic set
tool for the larger sizes, no special train-
ing or knowledge is needed to create safe,
re-settable tube end connections.

4
QSS-Quick Set System
As Simple as 1, 2, 3
Assembly of Parker Autoclave Engineers QS Series fittings couldnt be
more simple.
1) Slide on our inverted gland nut
2) Slide on our single ferrule 3
3) Insert into fitting body and tighten using the positioning mark
on the outside of the gland nut for reference
For our larger sizes our hydraulic set tool is required to ensure a
complete and superior tube bite.
1
Features
Proprietary single sleeve design provides superior tubing bite
reducing failure from vibration
Fewer parts to lose, reduced assembly errors
2
Long tube-support area provides resistance to vibration and
tube stress
Components manufactured from high strength Stainless Steel
Molybdenum Disulfide coated gland nuts help prevent galling
and allow for multiple remakes.

Pressure Ratings
Pressure ratings for a fluid system are determined by the
fitting or system component (including tubing) with the
lowest pressure rating. Maximum pressure ratings are marked
on all QS Series valves and fittings.

System Components Flow/Pressure

Working
Pressure (bar)** QSS -Quick Set System
Connection Orifice Flow Temperature
Diameter Area* 0 to 650F
in (mm) in2 (mm2) (-17.8 to 343C)
1/4 0.109 (2.77) 0.009 (5.81) 15,000 (1034)
3/8 0.203 (5.16) 0.032 (20.65) 15,000 (1034)
9/16 0.359 (9.12) 0.101 (65.16) 15,000 (1034)
3/4 0.516 (13.11) 0.209 (134.84) 15,000 (1034)
* Flow area shown is minimum system flow area including tubing.
** Maximum Working pressure is based on lowest rating of any system component.

5
This page left blank

6
Needle Valves
QS Series
Medium Pressure

Pressures to 15,000 psi (1034 bar)

Since 1945 Parker Autoclave Engineers has designed

Medium Pressure Valve Features:

Compression Sleeve to 15,000 psi (1034 bar).

Tubing sizes available from 1/4 to 3/4.
Rising stem/barstock body design.
Non-rotating stem prevents stem/seat galling.
Anti-galling molybdenum disulfide coated gland nuts.
Gland nut positioning mark for assembly.
Connection weep holes for safety and leak detection.
Metal-to-metal seating achieves bubble-tight shut-off, longer stem/seat life in abrasive

Needle Valves - QS Series

flow, greater durability for repeated on/off cycles and excellent corrosion resistance.
PTFE (PTFE) encapsulated packing provides dependable stem and body sealing.
Stem sleeve and packing gland materials have been selected to achieve extended thread
cycle life and reduced handle torque.
Choice of Vee or Regulating stem tip.
Available in two body patterns.
Parker Autoclave Engineers valves are complemented by a complete line of fittings, tubing,
check valves and line filters. The QS Series uses Parker Autoclave Engineers Quick Set
Medium Pressure

compression sleeve design, providing fast easy make-up and reliable bubble-tight performance
in liquid or gas service.

7
Needle Valves - QS Series
Pressures to 15,000 psi (1034 bar)

Pressure/
Tube Temperature
Outside Rating
Diameter Orifice psi (bar)
Size Connection Size Rated @ Room
Inches Type Inches (mm) Cv* Temperature**

1/4 QS 250 0.125 (3.18) 0.31 15,000 (1034)

3/8 QS 375 0.219 (5.56) 0.75 15,000 (1034)
9/16 QS 562 0.359 (9.12) 2.80 15,000 (1034)
3/4 QS 750 0.516 (13.10) 5.20 15,000 (1034)

Notes:
* CV values shown are for 2-way straight valve pattern. For 2-way
angle patterns, increase CV value 50%. (Based on water)

** For complete temperature ratings see pressure/temperature rating

guide in Technical Information section.

Generalized Flow Coefficient Curves (Cv)

POWDER COATED
STAINLESS STEEL
HANDLE
7
LOW FRICTION
ALUMINUM ONE PIECE NON-ROTATING
BRONZE PACKING STEM
GLAND 6
LOCKING DEVICE
Regulating Stem
Number of turns open

5
ANTI-EXTRUSION
BACK-UP RINGS
4
ADJUSTABLE PACKING
BELOW THREADS
COLD WORKED
TYPE 316 SS
3
BODY IN FIVE
PATTERNS

2
MEDIUM Vee Stem
PRESSURE
COMPRESSION
1
SLEEVE
CHOICE OF VEE CONNECTIONS
METAL-TO-METAL
OR REGULATING
STEM TIP
SEATING
0
10 20 30 40 50 60 70 80 90 100
To ensure proper fit use Parker Autoclave Engineers tubing % of rated Cv

Ordering Procedure
For complete information on available stem types, optional connections and additional valve options, see Needle Valve Options section or contact
your Sales Representative. QS Series valves are furnished complete with connection components, unless otherwise specified.

Typical catalog number: 15QS4071

15QS 4 07 1 Options
Valve Outside Diameter Stem/Seat Body Options
Series Tube Size Type Pattern
For extreme
15QS 4-1/4 07 - non-rotating 1 - two-way straight
temperature and other
6-3/8 Vee stem (on-off service) 2 - two-way angle options, see
9-9/16 08 - non-rotating 3 - three-way, two on pressure Valve Options.
12-3/4 regulating stem (tapered tip
4 - three-way, one on pressure
for regulating and shutoff)
5 - three-way, two stem
87 - Vee stem with replaceable seat
manifold valve
88 - Regulating stem with replaceable seat

8
Valve Options Valve Maintenance
Extreme Temperatures Repair Kits: add R to the front of valve catalog
Standard Parker Autoclave Engineers valves with PTFE packing may number for proper repair kit.
be operated to 450F (232C). High temperature packing and/or (Example: R15QS4071)
extended stuffing box are available for service from 0F (-17.8C) to Valve Bodies: Valve bodies are available. Order using the eight (8)
650F (343C) by adding the following suffixes to catalog order digit part number found on the valve drawing or
number. contact your Sales Representative for information.
TG standard valve with PTFE glass packing to 600F (316C).
GY standard valve with graphite braided yarn packing to 650F (343C). Consult your Parker Autoclave Engineers representative for pricing on repair
kits and valve
Parker Autoclave Engineers does not recommend compression sleeve connections bodies.
below 0F (-17.8C) or above 650F (343C). For additional valve options, contact
your Sales Representative.

Outside

Dimensions - inches (mm) Block
Catalog Stem Diameter Orifice Thick- Valve
Number Type Tube Diameter A B C D D1 E F G G1 H* M N ness Pattern

2-Way Straight
15QS4071 VEE 1/4 0.125 2.00 1.00 0.38 1.62 1.19 2.00 3.00 0.75 0.22 4.69 0.62 0.38 0.75
15QS4081 REG (6.35) (3.18) (50.80) (25.40) (9.53) (41.15) (30.23) (50.80) (76.20) (19.05) (5.59) (119.13) (15.75) (9.65) (19.05)
15QS6071 VEE 3/8 0.219 2.00 1.00 0.47 1.62 1.19 2.00 3.00 0.75 0.22 4.63 0.62 0.38 0.81
15QS6081 REG (9.53) (5.56) (50.80) (25.40) (11.94) (41.15) (30.23) (50.80) (76.20) (19.05) (5.59) (117.60) (15.75) (9.65) (20.57) See
15QS9071 VEE 9/16 0.359 3.00 1.50 0.53 2.38 1.75 3.00 4.00 1.00 0.34 6.05 0.69 0.50 1.25 Figure 1
15QS9081 REG (14.29) (9.12) (76.20) (38.10) (13.46) (60.45) (44.45) (76.20) (101.60) (25.40) (8.64) (153.67) (17.53) (12.70) (31.75)
15QS12071 VEE 3/4 0.516 4.12 2.06 0.62 3.00 2.25 3.88 10.25 1.12 0.44 7.13 0.88 0.63 1.50
15QS12081 REG (19.05) (13.11) (104.65) (52.32) (15.75) (76.20) (57.15) (98.43) (260.35) (28.45) (11.18) (180.98) (22.35) (16.00) (38.10)

2-Way Angle
15QS4072 VEE 1/4 0.125 2.00 1.00 0.38 1.19 2.44 3.00 0.75 0.22 4.81 0.62 0.38 0.75
15QS4082 REG (6.35) (3.18) (50.80) (25.40) (9.53) (30.23) (61.98) (76.20) (19.05) (5.59) (122.17) (15.75) (9.65) (19.05)
15QS6072 VEE 3/8 0.219 2.00 1.00 0.47 1.20 2.56 3.00 0.75 0.22 4.93 0.62 0.38 0.81
15QS6082 REG (9.53) (5.56) (50.80) (25.40) (11.94) (30.48) (65.02) (76.20) (19.05) (5.59) (125.22) (15.75) (9.65) (20.62) See
15QS9072 VEE 9/16 0.359 3.00 1.50 0.53 1.69 3.50 4.00 1.00 0.36 6.55 0.69 0.50 1.25 Figure 2
15QS9082 REG (14.29) (9.12) (76.20) (38.10) (13.46) (42.88) (88.90) (101.60) (25.40) (9.14) (166.37) (17.53) (12.70) (31.75)
15QS12072 VEE 3/4 0.516 4.12 2.06 0.62 2.19 4.63 10.25 1.12 0.44 7.88 0.88 0.63 1.50
15QS12082 REG (19.05) (13.11) (104.65) (52.32) (15.75) (55.58) (117.48) (260.35) (28.45) (11.18) (200.15) (22.35) (16.00) (38.10)
G - Packing gland mounting hole drill size * H Dimension is with stem in closed position. For prompt service, Parker Autoclave Engineers stocks
G - Bracket mounting hole size **1/8" straight and 3-Way/2 on pressure valves have offset select products. Consult factory.
1
Panel mounting drill size: 0.22 all valves. tube connections All dimensions for reference only and subject to change.

Figure 1 Figure 2
F F

G1 M M M M G
H N G G1
H
N
D1 D
D E
E
C C
B
A B
A
2-Way Straight 2-Way Angle

9
This page left blank

10
Ball Valves
2-Way QS Series
Pressures to 15,000 psi (1034 bar)

Parker Autoclave Engineers high-pressure ball valves have

been designed to provide superior quality for maximum per-
formance within a variety of valve styles, sizes, and process
connections. Some of the more unique design innovations
include an integral one-piece trunnion mounted style ball and
stem that eliminates the shear failure common in two piece
designs, re-torqueable seat glands that result in longer seat
life, and a low friction stem seal that reduces actuation torque Flow Configuration
and enhances cycle life.
These ball valves can also be modified to incorporate the use
of special materials, seals for high temperature applications,
subsea models, and valve actuators.
When it comes to high-pressure applications, these ball valves
with the associated high-pressure components, provide the
critical performance demanded by the high pressure market.

AE Ball Valve Features:

One-piece, trunnion mounted style, stem design Two-Way
eliminates shear failure and reduces the effects of side Shut-Off
loading found in two piece designs.
Re-torqueable seat glands for longer seat life.
Applications:

Ball Valves - 2-Way QS Series

PEEK seats offer excellent resistance to chemicals, heat,
and wear/abrasion. Laboratories
Full-port flow path minimizes pressure drop. Test Stands
316 cold worked stainless steel valve construction. Control Panels
Low friction pressure assisted graphite filled PTFE stem Chemical Research
seal increases cycle life and reduces operating torque. Pilot Plants
Quarter turn from open to close with positive stop. Water Blast Pumping Units
Viton o-rings for operation from 0F (-17.8C) to 400F High volume chemical injection
(204C). skids.
Optional o-rings available for high-temperature
applications.
Electric and pneumatic actuator options.

11
11
Ball Valves - 1/4 2-Way QS Series
Pressures to 15,000 psi (1034 bar) .250 (6.35mm) Orifice

MAWP @ Minimum Orifice

Connection Room Temperature inches(mm)
QS250 15,000 psi (1034 bar) .157 (3.99)
QS375 15,000 psi (1034 bar) .250 (6.35)
Valve Cv=1.51
MAWP: Maximum Allowable Working Pressure
Cv listed is for maximum orifice size of .250 inches only.
Consult factory for Cv of valves with reduced orifice sizes.

PRESSURE TEMPERATURE RATINGS

STAINLESS STEEL HANDLE

TEMPERATURE C
(-18) (38) (93) (150) (204) (260)
20,000 (1379)
ONE PIECE BALL
AND STEM

STOPPING DEVICE

15,000 (1034)
QS CONNECTION
PRESSURE PSIG

PRESSURE BAR
PACKING GLAND
THRUST WASHER
LOCKING PIECE

SPRING ENERGIZED SEAL

(690)
PEEK SEATS
10,000
LOCKNUT
SEAT GLAND

5,000 (345)

0
PEEK BEARING VITON O-RING 100 200 300 400 500
SEAT RETAINER
TEMPERATURE F

NOTE: Ball valves are not recommended for critical gas applications such as Hydrogen, Helium or other small molecular gases.

Ordering Procedure
For complete information on available end connections see complete catalog.

Typical catalog number: 2B 4 S 15 Q4

2B 4 S 15 Q4 XXX
Valve Ball Material Pressure End Connection Options
Series Orifice (X 1000 psi)
2B: 2-way Diameter S -316SS Q4 - QS 250 HT - High Temperature
4-1/4 (See Chart on next (Ball Valve Actuators,
(6.35 mm) page) see next page)

12
End Connection Options
Seat Gland
Catalog End Connection MAWP @ Hex
Number Number Connection Room Temperature Inches(mm)

2B4S15Q4 Q4 QS250 15,000 psi (1034 bar) 1 (25.40)

2B4S15Q6 Q6 QS375 15,000 psi (1034 bar) 1 (25.40)

MAWP: Maximum Allowable Working Pressure

Ball Valve Options Valve Maintenance

Electric Actuator Consult your Parker Autoclave Engineers representative for

EO1 - 120 volt AC 50/60 Hz pricing on repair kits. Refer to the Operation and Mainte-
EO2 - 220 volt AC 50/60 Hz nance manual for proper maintenance procedures.
EO3 - 24 VDC

Actuator Operating Temperature:

Pneumatic: -20F to 175F (-29C to 79C)
Electric: -20F to 160F (-29C to 71C)

High Temperature Option:

HT - for media temperature up to 500F (260C)

See ball valve actuator section for full description,

additional infomation, and options.

13
Ball Valves - 3/8 2-Way QS Series
Pressures to 15,000 psi (1034 bar) .359 (9.12mm) Orifice

MAWP @ Minimum Orifice

Connection Room Temperature inches(mm)
QS562 15,000 psi (1034 bar) .359 (9.12)
Valve Cv=3.09

MAWP: Maximum Allowable Working Pressure

Cv listed is for maximum orifice size of .359 inches only.
Consult factory for Cv of valves with reduced orifice sizes.

PRESSURE TEMPERATURE RATINGS

STAINLESS STEEL HANDLE

TEMPERATURE C
(-18) (38) (93) (150) (204) (260)
20,000 (1379)
ONE PIECE BALL
AND STEM

STOPPING DEVICE

15,000 (1034)
PACKING GLAND QS562 CONNECTION
PRESSURE PSIG

PRESSURE BAR
THRUST WASHER
LOCKING PIECE

SPRING ENERGIZED SEAL

CARBON FILLED (690)
PEEK SEATS 10,000
LOCKNUT
SEAT GLAND

5,000 (345)

0
PEEK BEARING VITON O-RING 100 200 300 400 500
SEAT RETAINER TEMPERATURE F

NOTE: Ball valves are not recommended for critical gas applications such as Hydrogen, Helium or other small molecular gases.

Ordering Procedure
For complete information on available end connections see complete catalog.

Typical catalog number: 2B 6 S 15 Q9

2B 6 S 15 Q9 XXX
Valve Ball Material Pressure End Connection Options
Series Orifice (X 1000 psi)
2B: 2-way Diameter S - 316SS Q9 - QS562 HT - High Temperature
(See Chart on next (Ball Valve Acutators,
6-3/8
page) see next page.)
(9.52 mm)

14
End Connection Options
Seat Gland
Catalog End Connection MAWP @ Hex
Number Number Connection Room Temperature Inches(mm)

2B6S15Q9 Q9 QS562 15,000 psi (1034 bar) 1.38 (35.05)

MAWP: Maximum Allowable Working Pressure

Ball Valve Options Valve Maintenance

Electric Actuator Consult your Parker Autoclave Engineers representative for

EO1 - 120 volt AC 50/60 Hz pricing on repair kits. Refer to the Operation and
EO2 - 220 volt AC 50/60 Hz Maintenance manual for proper maintenance procedures.
EO3 - 24 VDC

Actuator Operating Temperature:

Pneumatic: -20F to 175F (-29C to 79C)
Electric: -20F to 160F (-29C to 71C)

High Temperature Option:

HT - for media temperature up to 500F (260C)

See ball valve actuator section for full description,

additional information, and options.

15
Ball Valves - 1/2 2-Way QS Series
Pressures to 15,000 psi (1034 bar) .500 (12.7mm) Orifice

MAWP @ Minimum Orifice

Connection Room Temperature Inches (mm)
Male QS750 15,000 psi (1034 bar) .500 (12.70)
Valve Cv=10.20

MAWP: Maximum Allowable Working Pressure

PRESSURE TEMPERATURE RATINGS

STAINLESS STEEL HANDLE

TEMPERATURE C
(-18) (38) (93) (150) (204) (260)
ONE PIECE BALL STOPPING DEVICE 15,000 (1034)
AND STEM
PACKING GLAND
QS750 CONNECTION
THRUST WASHER
LOCKING PIECE
SPRING ENERGIZED SEAL CARBON FILLED
(690)
PRESSURE PSIG

10,000

PRESSURE BAR
PEEK SEATS

LOCKNUT SEAT GLAND

5,000 (345)

PEEK BEARING VITON O-RING

SEAT RETAINER
0
100 200 300 400 500
TEMPERATURE F

NOTE: Ball valves are not recommended for critical gas applications such as Hydrogen, Helium or other small molecular gases.

Ordering Procedure
For complete information on available end connections see complete catalog.

Typical catalog number: 2B 8 S 15 MAQ12

2B 8 S 15 MAQ12 XXX
Valve Ball Material Pressure End Connection Options
Series Orifice (X 1000 psi)
2B: 2-way Diameter S -316SS MAQ12 - Male QS750 HT - High Temperature

8-1/2 (See Chart on next (Ball Valve Acutators,

(12.7 mm) page) see next page.)

16
End Connection Options
Seat Gland
Catalog End Connection MAWP @ Square
Number Number Connection Room Temperature Inches(mm)

2B8S15MAQ12 MAQ12 Male QS750 15,000 psi (1034 bar) 1.19 (30.2)
MAWP: Maximum Allowable Working Pressure

Ball Valve Options Valve Maintenance

Electric Actuator Consult your Parker Autoclave Engineers representative for

EO1 - 120 volt AC 50/60 Hz pricing on repair kits. Refer to the Operation and Mainte-
EO2 - 220 volt AC 50/60 Hz nance manual for proper maintenance procedures.
EO3 - 24 VDC

Actuator Operating Temperature:

Pneumatic: -20F to 175F (-29C to 79C)
Electric: -20F to 160F (-29C to 71C)

High Temperature Option:

HT - for media temperature up to 500F (260C)

See ball valve Actuator section for full description,

additional information, and options.

17
Ball Valve Dimensions - inches (mm)

VALVE MODELS
E*
2B4S 2B6S 2B8S
4.33 4.97 5.97
E
A (109.99) (126.30) (151.64)
D
4.19 5.53 6.85
B (106.49) (140.41) (173.99)

2.00 3.00 4.13

C (50.80) (76.20) (104.78)

3.37 4.99 5.12

D (85.55) (126.82) (130.04) K TYPICAL DIAMETER

G
E
3.90
(99.02)
5.52
(140.32)
*(260.35)
10.25
BLOCK THICKNESS
A
1.13 1.38 1.76 H
F (28.58) (34.92) (44.70)
J
1.50 2.00 3.00 TYPICAL
G (38.10) (50.80) (76.20) F L

0.75 1.00 1.50

H (19.05) (25.40) (38.10)

0.43 0.41 0.50

J (10.92) (10.31) (12.70)

0.28 0.28 0.28

K (7.11) (7.11) (7.11) C

1.91 2.50 3.09 B

L (48.41) (63.50) (78.58) 12.66

Block 1.00 1.38 1.75

(25.40) (34.92) (44.45) 2B8S15MAQ12 Valve Only

Thickness

Ball Valve Panel Mounting Dimensions - inches (mm)

C (Diameter)
VALVE MODELS
2B4S 2B6S 2B8S D (Typical Diameter)
See Note:
1.500 2.000 3.000
A (38.10) (50.80) (76.20)

B 0.750 1.000 1.500

(19.05) (25.40) (38.10)

C 1.06 1.50 1.88 B

(26.92) (38.10) (47.63)

D 0.28 0.28 0.28 A

(7.11) (7.11) (7.11)

Note: Body mounting 1/4 - 20 thread All dimensions are for reference only
and are subject to change without notice.

18
Ball Valves
3-Way QS Series
Pressures to 15,000 psi (1034 bar)

Parker Autoclave Engineers high-pressure ball valves have

AE Ball Valve Features:

One-piece, trunnion mounted style, stem design
3-Way
3-Way 3-Way
3-Way
eliminates shear failure found in two piece designs and Switching
Switching Crossover
Diverting
reduces effects of side loading. 180 Turn
180 Turn 90 Turn
90 Turn

Re-torqueable seat glands for longer seat life.

Applications:

Ball Valves - 3-Way QS Series

Carbon filled PEEK seats offer excellent resistance to
chemicals, heat, and wear/abrasion.
Laboratories
Full-port flow path minimizes pressure drop.
Test Stands
316 cold worked stainless steel valve construction. Control Panels
Low friction pressure assisted graphite filled PTFE stem Chemical Research
seal increases cycle life and reduces operating torque.
Pilot Plants
Available in 90 turn diverter and 180 turn switching Water Blast Pumping Units
models.
High volume chemical injection
Viton o-rings for operation from 0F (-17.8C) to 400F skids.
(204C).
Optional o-rings available for high-temperature
applications.
Electric and pneumatic actuator options.

19
Ball Valves - 3/16" 3-Way QS Series
Pressures to 20,000 psi (1379 bar) .187 (4.77mm) Orifice

MAWP @ Minimum Orifice

Connection Room Temperature inches(mm)
QS250 15,000 psi (1034 bar) .157 (3.99)
QS375 15,000 psi (1034 bar) .188 (4.77)

Valve Cv=.50

MAWP: Maximum Allowable Working Pressure

Cv listed is for maximum orifice size of .188 inches only.
Consult factory for Cv of valves with reduced orifice sizes.

STAINLESS STEEL HANDLE

PRESSURE TEMPERATURE RATINGS

TEMPERATURE C

(-18) (38) (93) (150) (204) (260)

SET SCREW
20,000 (1379)

STOPPING DEVICE
ONE PIECE BALL
AND STEM

PACKING GLAND
15,000 (1034)
THRUST WASHER
LOCKING PIECE QS CONNECTIONS
PRESSURE PSIG

PRESSURE BAR
SPRING ENERGIZED SEAL BELLEVILLE WASHERS

BELLEVILLE BACKUP
LOCKNUT
SEAT GLAND 10,000 (690)
O-RING

5,000 (345)

O-RING
O-RING
CARBON FILLED PEEK SEATS
BEARING
SEAT RETAINER 0
100 200 300 400 500
BOTTOM GLAND
TEMPERATURE F

NOTE: Maximum side connection inlet pressure 15,000 psi (1034 bar).

NOTE: Ball valves are not recommended for critical gas applications such as Hydrogen, Helium or other small molecular gases.

Ordering Procedure
For complete information on available end connections see complete catalog

Typical catalog number: 3B 3 S 15 Q4

3B 3 S 15 Q4 XXX
Valve Ball Material Pressure End Connection Options
Series Orifice (X 1000 psi)
3B: 3-way Diameter S -316SS Q4 - QS250 HT - High Temperature
3BD: 3-way diverter (See Chart on (Ball Valve Actuators,
3-3/16
next page) see next page)
(4.77 mm)

20
End Connection Options
Catalog End Connection MAWP @ Hex
Number Number Connection Room Temperature Inches(mm)
3B3S15Q4 Q4 QS250 15,000 psi (1034 bar) 1 (25.40)
3BD3S15Q4
3B3S15Q6 Q6 QS375 15,000 psi (1034 bar) 1 (25.40)
3BD3S15Q6

OPEN OPEN OPEN CLOSED OPEN

*3-Way Diverter
*3-Way Diverter Valve
Valve 3-Way
3-WayBall
BallValve
Valve
90 Turn
Turn 180
180 Turn
Turn
90
*The Diverter Valve design permits inlet flow through the bottom port. Outlet flow may be diverted to either valve side port.

Ball Valve Options Valve Maintenance

Pneumatic Actuator: Repair Kits: add R to the front of valve catalog
AO - Air-to-open/Spring to close (diverter style only) numbers for proper repair kit.
AC - Air-to-close/Spring to open (diverter style only) (Example: R3B3S)
AOC - Air-to-open-and-close (double action)
Electric Actuator:
EO1 - 120 volt AC 50/60 Hz Consult your Parker Autoclave Engineers representative for
EO2 - 220 volt AC 50/60 Hz pricing on repair kits. Refer to the Operation and Mainte-
EO3 - 24 VDC nance manual for proper maintenance procedures.
Actuator Operating Temperature: See ball valve actuator section for full description, additional information,
Pneumatic: -20F to 175F (-29C to 79C) and options.
Electric: -20F to 160F (-29C to 71C)
High Temperature Option:
HT - for media temperature up to 500F (260C)

21
Ball Valves - 3/8" 3-Way QS Series
Pressures to 15,000 psi (1034 bar) .328 (8.33mm) Orifice

MAWP @ Minimum Orifice

Connection Room Temperature inches(mm)
QS562 15,000 psi (1034 bar) .328 (8.33)
Valve Cv=2.1

MAWP: Maximum Allowable Working Pressure

Cv listed is for maximum orifice size of .328 inches only.
Consult factory for Cv of valves with reduced orifice sizes.

STAINLESS STEEL HANDLE

PRESSURE TEMPERATURE RATINGS

SET SCREW TEMPERATURE C

(-18) (38) (93) (150) (204) (260)

STOPPING DEVICE
15,000 (1034)
ONE PIECE BALL
AND STEM QS CONNECTION
PACKING GLAND
THRUST WASHER
LOCKING PIECE
PRESSURE PSIG

(690)

PRESSURE BAR
SPRING ENERGIZED SEAL BELLEVILLE WASHERS 10,000
BELLEVILLE BACKUP
LOCKNUT
SEAT GLAND
O-RING

5,000 (345)

O-RING 0
O-RING
CARBON FILLED PEEK SEATS
100 200 300 400 500
BEARING
SEAT RETAINER TEMPERATURE F
BOTTOM GLAND
Side connection pressure not recommended.

NOTE: Ball valves are not recommended for critical gas applications such as Hydrogen, Helium or other small molecular gases.

Ordering Procedure
For complete information on available end connections see complete catalog.

Typical catalog number: 3B 6 S 15 Q9

3B 6 S 15 Q9 XXX
Valve Ball Material Pressure End Connection Options
Series Orifice (X 1000 psi)
3B: 3-way Diameter S -316SS Q9 - QS562 HT - High Temperature
3BD: 3-way diverter
6-3/8 (See Chart on next (Ball Valve Actuators,
(9.52 mm) page) see next page)

22
End Connection Options

Catalog End Connection MAWP @ Hex

Number Number Connection Room Temperature Inches(mm)

3B6S15Q9 Q9 QS562 15,000 psi (1034 bar) 1.38 (35.05)

3BD6S15Q9

MAWP: Maximum Allowable Working Pressure

OPEN OPEN OPEN CLOSED OPEN

*3-Way
*3-Way Diverter
Diverter Valve
Valve 3-WayBall
3-Way BallValve
Valve
90
90 Turn
Turn 180Turn
180 Turn

*The Diverter Valve design permits inlet flow through the bottom port. Outlet flow may be diverted to either valve side port.

Ball Valve Options Valve Maintenance

Pneumatic Actuator: Repair Kits: add R to the front of valve catalog
AO - Air-to-open/Spring to close (diverter style only) numbers for proper repair kit.
AC - Air-to-close/Spring to open (diverter style only)
AOC - Air-to-open-and-close (double action) (Example: R3B6S)
Electric Actuator:
EO1 - 120 volt AC 50/60 Hz
EO2 - 220 volt AC 50/60 Hz Consult your Parker Autoclave Engineers representative for
EO3 - 24 VDC pricing on repair kits. Refer to the Operation and Mainte-
nance manual for proper maintenance procedures.
Actuator Operating Temperature:
Pneumatic: -20F to 175F (-29C to 79C)
See ball valve actuator section for full description, additional information,
Electric: -20F to 160F (-29C to 71C) and options.
High Temperature Option:
HT - for media temperature up to 500F (260C)

23
Ball Valves - 1/2" 3-Way QS Series
Pressures to 10,000 psi (690 bar) .500 (12.7mm) Orifice

MAWP @ Minimum Orifice

Connection Room Temperature inches(mm)
Male QS750 10,000 psi (690 bar) .500 (12.70)
Valve Cv=4.4

MAWP: Maximum Allowable Working Pressure

STAINLESS STEEL HANDLE

ONE PIECE BALL STOPPING DEVICE

AND STEM

SET SCREW
PACKING GLAND PRESSURE TEMPERATURE RATINGS
THRUST WASHER LOCKING PIECE
BELLEVILLE WASHERS
TEMPERATURE C
STEM SEAL
BELLEVILLE BACKUP
LOCKNUT (-18) (38) (93) (150) (204) (260)
SEAT GLAND
15,000 (1034)

(690)

PRESSURE BAR
PRESSURE PSIG

10,000
QS CONNECTION
O-RING
O-RING O-RING

BOTTOM BEARING CARBON FILLED PEEK SEATS

SEAT RETAINER 5,000 (345)

BOTTOM GLAND

0
100 200 300 400 500
TEMPERATURE F

Maximum side connection inlet pressure 10,000 psi (690 bar)

NOTE: Ball valves are not recommended for critical gas applications such as Hydrogen, Helium or other small molecular gases.

Ordering Procedure
For complete information on available end connections see complete catalog.

Typical catalog number: 3B 8 S 10 MAQ12

3B 8 S 10 MAQ12 XXX
Valve Ball Material Pressure End Connection Options
Series Orifice (X 1000 psi)
3B: 3-way Diameter S -316SS MAQ12 - Male QS750 HT - High Temperature
3BD: 3-way diverter
8-1/2 (For material options (See Chart on (Ball Valve Actuators,
(12.7 mm) contact factory) next page) see next page)

24
End Connection Options

Catalog End Connection MAWP @ Square

Number Number Connection Room Temperature Inches(mm)

3B8S10MAQ12 MAQ12 Male QS750 10,000 psi (690 bar) 1.19 (30.2)
3BD8S10MAQ12
MAWP: Maximum Allowable Working Pressure

OPEN OPEN OPEN CLOSED OPEN

*3-Way Diverter
*3-Way Diverter Valve
Valve 3-Way
3-Way Ball
BallValve
Valve
90 Turn
90 Turn 180
180Turn
Turn

*The Diverter Valve design permits inlet flow through the bottom port. Outlet flow may be diverted to either valve side port.

Ball Valve Options Valve Maintenance

Pneumatic Actuator:
Repair Kits: add R to the front of valve catalog
AO - Air-to-open/Spring to close (diverter style only)
numbers for proper repair kit.
AC - Air-to-open/Spring to close (diverter style only)
(Example: R3B8S)
AOC - Air-to-open-and-close (double action)
Electric Actuator:
EO1 - 120 volt AC 50/60 Hz Consult your Parker Autoclave Engineers representative for
EO2 - 220 volt AC 50/60 Hz pricing on repair kits. Refer to the Operation and Maintenance
E03 - 24 VDC manual for proper maintenance procedures.
Actuator Operating Temperature:
See ball valve actuator section for full description, additional information,
Pneumatic: -20F to 175F (-29C to 79C) and options.
Electric: -20F to 160F (-29C to 71C)
High Temperature Option:
HT - for media temperature up to 500F (260C)

25
Ball Valve Dimensions - inches (mm)

VALVE MODELS
3B3S/3BD3S 3B6S/3BD6S 3B8S/3BD8S
E
5.64 6.55 7.37 D
A (143.35) (166.37) (187.20)

4.72 5.74 6.92

B (119.94) (145.79) (175.77) G K TYPICAL DIAMETER

10.28 BLOCK THICKNESS

2.50 3.00 4.13 (261.11) J H
C (63.50) (76.20) (104.78) TYPICAL

3.37 4.99 5.12 A

D (85.55) (126.82) (130.04) F

3.90 5.52 *10.25 L

E (99.02) (140.32) (260.35)

1.13 1.38 1.66

F (28.58) (34.93) (42.16)

1.50 2.00 3.00

G (38.10) (50.80) (76.20) M

0.75 1.00 1.50

H (19.05) (25.40) (38.10)

0.43 0.41 0.50

J (10.92) (10.31) (12.70)

0.28 0.28 0.28

K (7.11) (7.11) (7.11)

2.25 2.88 3.34

L (57.15) (73.03) (84.94)
C
0.97 1.19 1.25 B
M (24.64) (30.22) (31.75) 12.73
(323.34)*
Block 1.00 1.38 1.75
Thickness (25.40) (34.92) (44.45) *3B8S10MAQ12 and 3BD8S10MAQ12 Valves Only

Ball Valve Panel Mounting Dimensions - inches (mm)

VALVE MODELS C (Diameter)

3B3S/3BD3S 3B6S/3BD6S 3B8S/3BD8S D (Typical Diameter)
1.500 2.000 3.000 See Note:
A (38.10 (50.80) (76.20)

B 0.750 1.000 1.500

(19.05) (25.40) (38.10)

C 1.06 1.50 1.88 B

(26.92) (38.10) (47.63)

D 0.28
(7.11)
0.28
(7.11
0.28
(7.11)
A
Note: Body mounting 1/4 - 20 thread All dimensions are for reference only
and are subject to change without notice.

26
Ball Valves
Actuators
Pneumatic Actuators
Electric Actuators

Parker Autoclave Engineers ball valves can be supplied with

either pneumatic or electric operators for automated or re-
mote operation.

Pneumatic and electric operators can be supplied with a vari-

ety of features and options. Operators are sized for each valve
series to provide reliable and trouble free operation. Listed
below are the operator features and available options.

AE Ball Valve Actuator Features/Options:

Electric Operators
Interface with control systems for automated operation
Ball Valves - Actuators
and monitoring
120 & 220 VAC, 50/60 Hz standard
24VDC
Explosion proof available
CE mark available

27
Ball Valves - Actuators
Pneumatic Operated Ball Valves
Add the suffix -AO, -AC or -AOC to the appropriate valve catalog number for a complete valve assembly

VALVE DIMENSION DATA - Inches (mm) MINIMUM REQUIRED

SERIES AIR PRESSURE

NOTE: Maximum allowable air pressure is 150 psi (10.34) Actuators operating temperature: -20F to 175F (-29C to 79C)
1/8 NPT female air connector (*= 1/4 NPT) High temperature actuator option available, consult factory
AO: Air to open/spring to close Stainless steel housing actuator models available, consult factory
AC: Air to close/spring to open Actuators available with limit switches and visual indicators.
AOC: Air to open/air to close (double acting) Corrosion resistant anodized aluminum housing.
Epoxy coated housing available.
Solenoids availabe, direct or nipple mount.

"A" "J" "H"
"A"/2

"B"

"G" DIAMETER
(2) Holes
"C" "F"
"D" "E"

"I"/2
28 "I"
Ball Valves - Actuators
Electric Operated Ball Valves
Add the suffix -EO1, -EO2 or -EO3 to the appropriate valve catalog number for a complete valve assembly

VALVE DIMENSION DATA - Inches (mm) VOLTAGE

NOTE: EO1: Electric 120 VAC For other voltages consult factory
EO2: Electric 220 VAC Actuator operating temperature: -20F to 160F (-29C to 71C)
EO3: Electric 24 VDC Corrosive resistant Zytel housing
CSA approved for NEMA 4 & 4X Consult factory for epoxy option

5.88 4.50
(149.35) (114.30)
2.25
(57.15)

5.25
4.13 (133.35)
(104.90) 6.63
(168.40)

3/4" NPT CONDUIT

CONNECTION
.69
"E" DIAMETER (17.52)
(2) Holes
"A"
"D"
"C"
"B"

"F/2"
"F"
29
Ball Valves - Actuators
Electric Operated Ball Valves
Add the suffix -EO1, -EO2 or -EO3 to the appropriate valve catalog number for a complete valve assembly

VALVE VOLTAGE VALVE VOLTAGE

SERIES 50/60 HZ SERIES

2B8-EO1 120 VAC 2B8-EO3 24 VDC
3BD8-EO1 120 VAC 3BD8-EO3 24 VDC
2B8-EO2 220 VAC 2B8-EO3 24 VDC
3BD8-EO2 220 VAC 3BD8-EO3 24 VDC

NOTE: EO1: Electric 120 VAC CE marked.

EO2: Electric 220 VAC UL listed & CSA approved for NEMA 4, 4x, 7 & 9
EO3: Electric 24 VDC Explosion proof
For other voltages consult factory
Actuator operating temperature: -20F to 160F (-29C to 71C)
Powder coated aluminum housing 7.96
(202.18)
9.21 3.98
(233.93) (101.09)
4.04
(102.61)

11.04
(280.29)

8.87
(225.29)

3/4" NPT CONDUIT

3.69 CONNECTION
2.35
(93.72)
(59.69)
3/4" NPT CONDUIT 1.63
CONNECTION (41.40)

0.53 (13.46)
3.00 (2) HOLES
(76.20)
1.50 1.00 (25.40)
(38.10) 2.00 (50.80)

1.50
3.00 (38.10)
(76.20)

30
Fittings and Tubing
QS Series
Medium Pressure

Pressures to 15,000 psi (1034 bar)

Since 1945 Parker Autoclave Engineers has designed

and built premium quality valves, fittings and tubing.
This commitment to engineering and manufacturing
excellence has earned Parker Autoclave Engineers a
reputation for reliable, efficient product performance.
Parker Autoclave Engineers has long been established
as the world leader in high pressure fluid handling
components for the chemical/petrochemical,
research, and oil and gas industries.

QS Medium Pressure Fittings and Tubing:

Available sizes are 1/4, 3/8, 9/16 and 3/4.
Fittings and tubing manufactured from high strength
stainless steel.
Molybdenum disulfide-coated gland nuts to prevent galling.

Fittings and Tubing - QS Series

Gland nut positioning mark for assembly.
Single-ferrule compression sleeve.
Connection weep holes for safety and leak detection.
Fast easy make-up of connection.
Operating Temperatures from 0F (-17.8C) to 650F (343C).

The Medium Pressure QS Series uses Parker Autoclave Engineers Quick Set compression sleeve
design. This single-ferrule compression sleeve connection delivers fast, easy make-up and
reliable bubble-tight performance in liquid or gas service.
Medium Pressure

31
31
Fittings and Tubing - QS Series
Pressures to 15,000 psi (1034 bar)
Parker Autoclave Engineers Medium Pressure QS
Fittings are designed for use with QS Series valves
and medium pressure tubing. These fittings feature
improved compression connections with larger
orifices for excellent flow capabilities. Autoclave
fittings and components are manufactured of high
strength stainless steel.

Connection Components
All Parker Autoclave Engineers valves and fittings are supplied complete with appropriate glands and sleeves. To order these com-
ponents separately, use order numbers listed. When using plug, sleeve is not required.

Gland Sleeve Plug

QSG ( ) QSS ( ) QSP ( )

Outside Pressure Dimensions - inches (mm)

Catalog Connection Minimum Block Fitting
Diameter Rating Opening A B C D E F G Thickness
Number Type Pattern
Tube psi (bar)* Typical Thickness

Elbow
QSL4400 QS250 1/4 15,000 0.16 1.38 2.00 0.52 0.63 1.00 1.00 0.75
(6.35) (1034,20) (3.99) (34.93) (50.80) (13.23) (15.88) (25.40) (25.40) (19.05)
QSL6600 QS375 3/8 15,000 0.25 1.50 2.00 0.55 0.75 1.00 1.00 0.81
(9.53) (1034,20) (6.35) (38.10) (50.80) (14.00) (19.05) (25.40) (25.40) (20.62) See
QSL9900 QS562 9/16 15,000 0.36 2.19 3.00 0.82 1.19 1.50 1.50 1.25 Figure 1
(14.29) (1034,20) (9.12) (55.58) (76.20) (20.83) (30.18) (38.10) (38.10) (31.75)
QSL12 QS750 3/4 15,000 0.52 2.94 4.13 1.04 1.50 2.06 2.06 1.50
(19.05) (1034,20) (13.11) (74.63) (104.78) (26.37) (38.10) (52.40) (52.40) (38.10)

*Maximum pressure rating is based on the lowest rating For mounting hole option add suffix PM to catalog number.
of any component. Consult factory for mounting hole dimensions.
Actual working pressure may be determined by tubing Figure 1
pressure rating, if lower.
All dimensions for reference only and subject to change. D HEX
For prompt service, Parker Autoclave Engineers stocks F
select products. Consult your local representative.
C

E
A

B
Elbow

32
Outside Pressure Dimensions - inches (mm)
Catalog Connection Minimum Block Fitting
Diameter Rating Opening A B C D E F G Thickness
Number Type Pattern
Tube psi (bar)* Typical Thickness

Tee
QST4440 QS250 1/4 15,000 0.16 1.38 2.00 0.52 0.63 1.00 1.00 0.75
(6.35) (1034,20) (3.99) (34.93) (50.80) (13.23) (15.88) (25.40) (25.40) (19.05)
QST6660 QS375 3/8 15,000 0.25 1.50 2.00 0.55 0.75 1.00 1.00 0.81
(9.53) (1034,20) (6.35) (38.10) (50.80) (14.00) (19.05) (25.40) (25.40) (20.62) See
QST9990 QS562 9/16 15,000 0.36 2.19 3.00 0.82 1.19 1.50 1.50 1.25 Figure 2
(14.29) (1034,20) (9.12) (55.58) (76.20) (20.83) (30.18) (38.10) (38.10) (31.75)
QST12 QS750 3/4 15,000 0.52 2.94 4.13 1.04 1.50 2.06 2.06 1.50
(19.05) (1034,20) (13.11) (74.63) (104.78) (26.37) (38.10) (52.40) (52.40) (38.10)

Cross
QSX4444 QS250 1/4 15,000 0.16 2.00 2.00 0.52 0.63 1.00 1.00 0.75
(6.35) (1034,20) (3.99) (50.80) (50.80) (13.23) (15.88) (25.40) (25.40) (19.05)
QSX6666 QS375 3/8 15,000 0.25 2.00 2.00 0.55 0.75 1.00 1.00 0.81
(9.53) (1034,20) (6.35) (50.80) (50.80) (14.00) (19.05) (25.40) (25.40) (20.62) See
QSX9999 QS562 9/16 15,000 0.36 3.00 3.00 0.82 1.19 1.50 1.50 1.25 Figure 3
(14.29) (1034,20) (9.12) (76.20) (76.20) (20.83) (30.18) (38.10) (38.10) (31.75)
QSX12 QS750 3/4 15,000 0.52 4.13 4.13 1.04 1.50 2.06 2.06 1.50
(19.05) (1034,20) (13.11) (104.78) (104.78) (26.37) (38.10) (52.40) (52.40) (38.10)
For mounting hole option add suffix PM to catalog number. Consult factory for mounting hole dimensions.

Figure 2 Figure 3
F
D HEX
F C

C E
D
HEX A
E
A

B B

Tee Cross

Outside Pressure Dimensions - inches (mm)

Catalog Connection Minimum Block Fitting
Diameter Rating Opening A B C D E F G Thickness
Number Type Pattern
Tube psi (bar)* Typical Thickness

Straight Coupling
15F44QQ QS250 1/4 15,000 0.16 0.75 1.63 0.52 0.63 Straight
(6.35) (1034,20) (3.99) (19.05) (41.28) (13.23) (15.88)
15F66QQ QS375 3/8 15,000 0.25 0.81 1.75 0.55 0.75 Straight
(9.53) (1034,20) (6.35) (20.65) (44.45) (14.00) (19.05) See
15F99QQ QS562 9/16 15,000 0.36 1.38 2.75 0.82 1.19 Straight Figure 4
(14.29) (1034,20) (9.12) (34.93) (69.85) (20.83) (30.18)
15F12Q QS750 3/4 15,000 0.52 1.50 3.75 1.04 1.50 Straight
(19.05) (1034,20) (13.11) (38.10) (95.25) (26.37) (38.10)

Bulkhead Coupling
15BF44QQ QS250 1/4 15,000 0.16 0.88 2.00 0.52 0.63 0.63 1.00 0.38
(6.35) (1034,20) (3.99) (22.23) (50.80) (13.23) (15.88) (15.88) (25.40) (9.53)
15BF66QQ QS375 3/8 15,000 0.25 1.06 2.38 0.55 0.75 0.79 1.38 0.38
(9.53) (1034,20) (6.35) (27.00) (60.33) (14.00) (19.05) (19.94) (34.93) (9.53) See
15BF99QQ QS562 9/16 15,000 0.36 1.63 2.63 0.82 1.19 0.91 1.88 0.38 Figure 5
(14.29) (1034,20) (9.12) (41.40) (66.68) (20.83) (30.18) (22.99) (47.75) (9.53)
15BF12Q QS750 3/4 15,000 0.52 1.88 3.50 1.04 1.50 1.50 2.13 0.38
(19.05) (1034,20) (13.11) (47.63) (88.90) (26.37) (38.10) (38.10) (53.98) (9.53)
*Maximum pressure rating is based on the lowest rating of any component. All dimensions for reference only and subject to change. Union Couplings are designed with a removable seat insert
Actual working pressure may be determined by tubing pressure rating, For prompt service, Autoclave stocks select products. allowing disassembly and tubing removal without the necessity of
if lower. Consult your local representative. loosening other items in a line.

Figure 4 Figure 5
G MAX
A HEX

D D
HEX F
HEX A
B C
E
B C
Straight Coupling Bulkhead Coupling
33
Medium Pressure Tubing
Pressures to 15,000 psi (1034 bar)

Parker Autoclave Engineers offers a complete selection of austenetic, cold

drawn stainless steel tubing designed to match the performance standards
of Parker Autoclave Engineers valves and fittings. Parker Autoclave Engi-
neers medium pressure tubing is manufactured specifically for high pressure
applications requiring both strength and corrosion resistance. The tubing
is furnished in random lengths between 20 feet (6 meters) and 27 feet (8.2
meters). The average is 24 feet (7.3 meters). Medium Pressure Tubing is
available in four sizes and a variety of materials.
Inspection and Testing
Parker Autoclave Engineers medium pressure tubing is inspected to assure freedom from seams, laps, fissures or
other flaws, as well as carburization or intergranular carbide precipitation. The outside and inside diameters of the
tubing are subject to special inspection and are controlled within close tolerences to assure proper fit. Sample pieces
of tube for each lot are tested to confirm mechanical properties. Hydrostatic testing is also performed on a statistical
basis and is conducted at the working pressure of the tube. Parker Autoclave Engineers will perform 100% hydrostatic
testing at additional cost if desired.
Tubing Tolerance
Nominal Tubing Size Tolerance/Outside Diameter
inches (mm) inches (mm)
1/4 (6.35) .248/.243 (6.30/6.17)
3/8 (9.53) .370/.365 (9.40/9.27)
9/16 (14.27) .557/.552 (14.15/14.02)
3/4 (19.05) .745/.740 (18.92/18.80)

Catalog Tube Fits Tube Size Inches (mm) Flow Working Pressure psi (bar)*
Number Material Connection Outside Inside Wall Area -325 to 100F 200F 400F 600F
Type Diameter Diameter Thickness in.2 (mm2) -198 to - 37.8C 93C 204C 316C

MS15-092** 316SS 20,000 20,000 19,250 18,050

QS250 1/4 0.109 0.070 0.009 (1378.93) (1378.93) (1327.22) (1244.48)
MS15-192** 304SS (6.35) (2.77) (1.78) (5.81) 20,000 18,950 17,200 17,000
(1378.93) (1306.54) (1185.88) (1172.09)
MS15-093** 316SS 20,000 20,000 19,250 18,050
QS375 3/8 0.203 0.086 0.032 (1378.93) (1378.93) (1327.22) (1244.48)
MS15-193** 304SS (9.53) (5.16) (2.18) (20.65) 20,000 20,000 19,250 18,050
(1378.93) (1378.93) (1327.22) (1244.48)
MS15-097 316SS QS562 9/16 0.359 0.101 0.101 15,000 15,000 14,400 13,650
(14.29) (9.12) (2.57) (65.16) (1034.19) (1034.19) (992.82) (941.12)
MS15-098 316SS QS750 3/4 0.516 0.117 0.209 15,000 15,000 14,400 13,650
(19.05) (13.11) (2.97) (134.84) (1034.19) (1034.19) (992.82) (941.12)

*Maximum pressure rating is based on the lowest rating of any component.

34
Nipples - QS Series
Pressures to 15,000 psi (1034 bar)

For rapid system make-up, Parker Autoclave Engineers supplies pre-assem-

bled nipples in various sizes and lengths for Parker Autoclave Engineers QSS
valves and fittings.
Special Lengths
In addition to the standard lengths listed in the table below, nipples are
available in any custom length. Consult factory.

Materials
Catalog numbers in table refer to Type 316 Stainless Steel.
Catalog Numbers Working
Fits Tube Size Pressure
Nipple Length Inches (mm)
Connection Inches (mm) at 100
4.00 6.00 8.00 10.00 12.00 Type psi (bar)
(101.60) (152.40) (203.20) (254.60) (304.80) OD ID

QNA4404-316 QNA4406-316 QNA4408-316 QNA44010-316 QNA44012-316 QS250 1/4 0.109 15,000

Close Tube Port Connectors

Size Fits Connection Dimension L
Model Inches (mm) Inches (mm)
Type

QTS4403.25 1/4 (6.35) QS250 3.25 (82.55)

QTS6603.50 3/8 (9.53) QS375 3.50 (88.90)
L
QTS9905.25 9/16 (14.29) QS562 5.25 (133.35)
QTS1206.375 3/4 (19.05) QS750 6.38 (162.10)

Elbow Tube
Size Fits Connection Dimension H Mean Radius R Inside Radius Ri
Model Type Inches (mm)
Inches (mm) Inches (mm) Inches (mm)

Ri
H Typ.

35
Check Valves - QS Series
Pressures to 15,000 psi (1034 bar)

Ball Check Valves Prevent reverse flow where leak-tight shut-off is not
mandatory. When differential drops below cracking pressure,
valve closes. With all-metal components, valve can be used up
to 650F (343C). See Technical Information section for con-
nection temperature limitations. (Not for use as a relief valve.)
Ball and poppet are an integral design to assure positive,
in-line seating without chatter. Poppet is designed essentially
for axial flow with minimum pressure drop.
FLOW
Materials: 316 Stainless Steel: Body, cover, cover gland, ball
poppet. 300 Series Stainless Steel: Spring
CAUTION: While testing has shown O-Rings to provide satisfactory service life, both cyclic and shelf life may vary widely with differing service conditions, properties of reactants, pressure and temperature cycling
and age of the O-ring. FREQUENT INSPECTIONS SHOULD BE MADE to detect any deterioration, and O-rings replaced as required.

CAUTION: See Tubing section for proper selection of tubing.

Fits Pressure Orifice Dimensions - inches (mm)

Catalog Rated Fitting
Connection Rating inches
Number Cv A B C D Hex Pattern
Type psi (bar)* (mm) Typical

O-Ring Check Valves

QSO4400 QS250 15,000 0.188 0.15 3.18 2.56 0.44 0.63 0.81
(1034.20) (4.78) (80.77) (65.02) (11.18) (16.00) (20.57)
QSO6600 QS375 15,000 0.312 0.63 3.56 3.00 0.53 0.75 1.00
(1034.20) (7.93) (90.42) (76.20) (13.46) (19.05) (25.40) See
QSO9900 QS562 15,000 0.359 2.30 5.21 4.50 0.81 1.19 1.75 Figure 1
(1034.20) (9.12) (132.33) (114.30) (20.57) (30.18) (44.45)
QSO12 QS750 15,000 0.516 4.70 6.40 5.50 1.03 1.50 1.88
(1034.20) (13.11) (162.56) (139.70) (26.16) (38.10) (47.75)

Ball Check Valves

QSB4400 QS250 15,000 0.188 0.15 3.18 2.56 0.44 0.63 0.81
(1034.20) (4.78) (80.77) (65.02) (11.18) (16.00) (20.57)
QSB6600 QS375 15,000 0.312 0.63 3.56 3.00 0.53 0.75 1.00
(1034.20) (7.93) (90.42) (76.20) (13.46) (19.05) (25.40) See
QSB9900 QS562 15,000 0.359 2.30 5.21 4.50 0.81 1.19 1.75 Figure 1
(1034.20) (9.12) (132.33) (114.30) (20.57) (30.18) (44.45)
QSB12 QS750 15,000 0.516 4.70 6.40 5.50 1.03 1.50 1.88
(1034.20) (13.11) (162.56) (139.70) (26.16) (38.10) (47.75)

Distance across flats

Note:
Figure 1
All check valves are furnished complete with connection components unless otherwise specified. A
B
*Maximum pressure rating is based on the lowest rating of any component.
Actual working pressure may be determined by tubing pressure rating, if lower.
HEX D HEX
All dimensions for reference only and subject to change.
For prompt service, Parker Autoclave Engineers stocks select products.
Consult your local representative.
C C
36
QS Series
Male /female adapters are designed to adapt a female connec- Materials
tion to another size and/or type of connection without the need All Parker Autoclave Engineers adapters are precision ma-
for additional couplings. In selecting an adapter involving two chined from high strength stainless steel.
different sized connections, the larger connection should be
on the male end where it is possible to maximize the mechani-
cal strength of the adapter.

To use this chart:

FEMALE END
Quick Set Medium Pressure
Connection
Size and Type 1/4 3/8 9/16 3/4 1/4 3/8 9/16 3/4 1
QS250 QS375 QS562 QS750 SF250CX SF375CX SF562CX SF750CX SF1000CX

Fits this Pressure 15,000 15,000 15,000 15,000 20,000 20,000 20,000 20,000 20,000
Female Rating (1034.20) (1034.20) (1034.20) (1034.20) (1378.93) (1378.93) (1378.93) (1378.93) (1378.93)
Connection PSI (bar)*
15,000
1/4 QS250 (1034.20) 15M46QQ 15M49QQ 15M412QQ 15M44Q6 15M46Q6 15M49Q6 15M412Q6 15M416Q6
15,000
Quick Set

20,000
MALE END

3/8 SF375CX (1378.93) 15M64KQ 15M66KQ 15M69KQ 15M612KQ

1/4 F250C (4136.85) 15M44BQ 15M46BQ 15M49BQ 15M412BQ

60,000
3/8 F375C (4136.85) 15M64BQ 15M66BQ 15M69BQ 15M612BQ
60,000
9/16 F562C (4136.85) 15M94BQ 15M96BQ 15M99BQ 15M912BQ
15,000
1/4 NPT 15M44NQ 15M46NQ 15M49NQ 15M412NQ
National Pipe Thread (NPT)

Note:
All AE adapters are supplied complete with appropriate gland nuts and sleeves unless specified without.
NOTE: NPT (Pipe) connections
* The maximum pressure rating for an adapter is determined by the connection component with the NPT threads must be sealed using a high quality PTFE tape and/or
LOWEST pressure rating; that is, the two end connections and the tubing or pipe used, whichever is PTFE paste product. Refer to thread sealant manufacturers instructions
LOWER. on how to apply thread sealant.
Sealing performance may vary based on many factors such as pressure,
CAUTION: See appropriate pressure section in reference to proper selection of tubing.
temperature, media, thread quality, thread material, proper thread
engagement and proper use of thread sealant.
Customer should limit the number of times an NPT fitting is assembled
and disassembled because thread deformation during assembly will
result in deteriorating seal quality over time. When using only PTFE tape,
consider using thread lubrication to prevent galling of mating parts.

37
Quick Set Female Quick Set Female Quick Set Female Quick Set Female
to to to to
Quick Set Male Medium Pressure Male High Pressure Male National Pipe Male

15M44Q3 15M46Q3 15M49Q3 15M44Q8 15M46Q8 15M48Q8 10M412Q8 10M416Q8

15M64Q3 15M66Q3 15M69Q3 15M64Q8 15M66Q8 15M68Q8 10M612Q8 10M616Q8

15M94Q3 15M96Q3 15M99Q3 15M94Q8 15M96Q8 15M98Q8 10M912Q8 10M916Q8

15M124Q3 15M126Q3 15M129Q3 15M124Q8 15M126Q8 15M128Q8 10M1212Q8 10M1216Q8

For prompt service, Parker Autoclave Engineers stocks select products. Consult factory.

38
QS Series

Male End Dimension inches (mm) Male End Dimension inches (mm)
Female Catalog Female Catalog
Fits this Fits this
End Number A Hex B End Number A Hex B
Connection Connection

QS250 QS250 QS562 QS250 15M94QQ 1.00 (25.4) 1.85 (46.8)

QS250 QS375 15M46QQ QS562 QS375 15M96QQ 1.00 (25.4) 1.85 (46.8)
QS250 QS562 15M49QQ QS562 QS562
QS250 QS750 15M412QQ QS562 QS750 15M912QQ
QS250 SF250CX 15M44Q6 QS562 SF250CX 15M94Q6
QS250 SF375CX 15M46Q6 QS562 SF375CX 15M96Q6
QS250 SF562CX 15M49Q6 QS562 SF562CX 15M99Q6
QS250 SF750CX 15M412Q6 QS562 SF750CX 15M912Q6
QS250 SF1000CX 15M416Q6 QS562 SF1000CX 15M916Q6
QS250 F250C 15M44Q3 QS562 F250C 15M94Q3
QS250 F375C 15M46Q3 QS562 F375C 15M96Q3
QS250 F562C 10M49Q3 QS562 F562C 15M99Q3
QS250 1/4 NPT 15M44Q8 .75 (19.1) 1.69 (42.9) QS562 1/4 NPT 15M94Q8 1.19 (30.1) 2.22 (56.4)
QS250 3/8 NPT 15M46Q8 QS562 3/8 NPT 15M96Q8 1.19 (30.1) 2.22 (56.4)
QS250 1/2 NPT 15M48Q8 QS562 1/2 NPT 15M98Q8 1.19 (30.1) 2.41 (61.1)
QS250 3/4 NPT 10M412Q8 QS562 3/4 NPT 10M912Q8 1.38 (35.1) 2.56 (65.0)
QS250 1 NPT 10M416Q8 QS562 1 NPT 10M916Q8

QS375 QS250 15M64QQ .75 (19.1) 1.40 (35.6) QS750 QS250 15M124QQ
QS375 QS375 QS750 QS375 15M126QQ 1.50 (38.1) 2.53 (64.1)
QS375 QS562 15M69QQ QS750 QS562 15M129QQ 1.50 (38.1) 2.53 (64.1)
QS375 QS750 15M612QQ QS750 QS750
QS375 SF250CX 15M64Q6 QS750 SF250CX 15M124Q6
QS375 SF375CX 15M66Q6 QS750 SF375CX 15M126Q6
QS375 SF562CX 15M69Q6 QS750 SF562CX 15M129Q6
QS375 SF750CX 15M612Q6 QS750 SF750CX 15M1212Q6
QS375 SF1000CX 15M616Q6 QS750 SF1000CX 15M1216Q6
QS375 F250C 15M64Q3 QS750 F250C 15M124Q3
QS375 F375C 15M66Q3 QS750 F375C 15M126Q3
QS375 F562C 15M69Q3 QS750 F562C 15M129Q3
QS375 1/4 NPT 15M64Q8 .75 (19.1) 1.66 (42.2) QS750 1/4 NPT 15M124Q8
QS375 3/8 NPT 15M66Q8 1.00 (25.4) 1.78 (45.3) QS750 3/8 NPT 15M126Q8
QS375 1/2 NPT 15M68Q8 1.19 (30.1) 2.16 (54.8) QS750 1/2 NPT 15M128Q8 1.50 (38.1) 2.78 (70.5)
QS375 3/4 NPT 10M612Q8 QS750 3/4 NPT 10M1212Q8
QS375 1 NPT 10M616Q8 QS750 1 NPT 10M1216Q8
For prompt service, Parker Autoclave Engineers stocks select products. Maximum pressure rating is based on the lowest rating of any component.
Consult factory. Actual working pressure may be determined by tubing pressure rating, if lower.
Note: For pressure rating see selection chart.
All Dimensions for reference only and subject to change.

QSS to Pipe QSS to QSS

A A
HEX HEX

B B

39
QS Series

Male End Dimension inches (mm) Male End Dimension inches (mm)
Female Catalog Female Catalog
Fits this Fits this
End Number A Hex B End Number A Hex B
Connection Connection

SF250CX QS250 15M44KQ F250C QS250 15M44BQ .75 (19.1) 1.31 (33.3)
SF250CX QS375 15M46KQ F250C QS375 15M46BQ .81 (20.6) 1.56 (39.7)
SF250CX QS562 15M49KQ F250C QS562 15M49BQ
SF250CX QS750 15M412KQ F250C QS750 15M412BQ

SF375CX QS250 15M64KQ F375C QS250 15M64BQ

SF375CX QS375 15M66KQ .081 (20.6) 1.81 (46.1) F375C QS375 15M66BQ
SF375CX QS562 15M69KQ F375C QS562 15M69BQ
SF375CX QS750 15M612KQ 1.50 (38.1) 3.00 (76.2) F375C QS750 15M612BQ

SF562CX QS250 15M94KQ .94 (23.8) 1.75 (44.5) F562C QS250 15M94BQ 1.19 (30.1) 1.81(46.1)
SF562CX QS375 15M96KQ .94 (23.8) 1.75 (44.5) F562C QS375 15M96BQ 1.19 (30.1) 1.69 (42.9)
SF562CX QS562 15M99KQ 1.38 (34.9) 2.50 (63.5) F562C QS562 15M99BQ 1.38 (34.9) 2.32 (58.8)
SF562CX QS750 15M912KQ 1.50 (38.1) 3.25 (82.6) F562C QS750 15M912BQ

SF750CX QS250 15M124KQ

SF750CX QS375 15M126KQ
SF750CX QS562 15M129KQ 1.38 (34.9) 2.67 (67.8)
SF750CX QS750 15M1212KQ 1.50 (38.1) 3.06 (77.7)

SF1000CX QS250 15M164KQ

SF1000CX QS375 15M166KQ
SF1000CX QS562 15M169KQ 1.50 (38.1) 2.88 (73.0)
SF1000CX QS750 15M1612KQ 1.50 (38.1) 3.38 (85.7)

MP to QSS HP to QSS

A
HEX A
HEX

B
B

Maximum pressure rating is based on the lowest rating of any component.

Actual working pressure may be determined by tubing pressure rating, if lower.
Note: For pressure rating see selection chart.
All Dimensions for reference only and subject to change.
Adapter configurations may vary from outline shown.
For prompt service, Parker Autoclave Engineers stocks select products.
Consult factory.

40
QS Series

Male End Dimension inches (mm)

Female Catalog
Fits this
End Number A Hex B
Connection

1/4 NPT QS250 15M44NQ 0.75 (19.1) 1.44 (36.5)

1/4 NPT QS375 15M46NQ 0.81 (20.6) 1.63 (41.3)
1/4 NPT QS562 15M49NQ
1/4 NPT QS750 15M412NQ

3/8 NPT QS250 15M64NQ 0.75 (19.1) 1.50 (38.1)

3/8 NPT QS375 15M66NQ 0.81 (20.6) 1.63 (41.3)
3/8 NPT QS562 15M69NQ 1.38 (35.1) 2.13 (53.5)
3/8 NPT QS750 15M612NQ

1/2 NPT QS250 15M84NQ 0.94 (23.8) 1.75 (44.5)

1/2 NPT QS375 15M86NQ 0.94 (23.8) 1.63 (41.3)
1/2 NPT QS562 15M89NQ 1.38 (35.1) 2.25 (57.2)
1/2 NPT QS750 15M812NQ

3/4 NPT QS250 10M124NQ

3/4 NPT QS375 10M126NQ
3/4 NPT QS562 10M129NQ 1.38 (35.1) 2.38 (60.3)
3/4 NPT QS750 10M1212NQ 1.50 (38.1) 2.81 (71.4)

1 NPT QS250 10M164NQ

1 NPT QS275 10M166NQ
1 NPT QS562 10M169NQ 1.50 (38.1) 2.38 (60.3)
1 NPT QS750 10M1612NQ 1.50 (38.1) 2.38 (60.3)

NPT to QSS

A
HEX

Maximum pressure rating is based on the lowest rating of any component.

Actual working pressure may be determined by tubing pressure rating, if lower.
Note: For pressure rating see selection chart.
All Dimensions for reference only and subject to change.
Adapter configurations may vary from outline shown.
For prompt service, Parker Autoclave Engineers stocks select products.
Consult factory.

41
QS Series
Parker Autoclave Engineers standard male-to-male one piece adapters are
available in multiple configurations. Standard male-to-male adapters are
machined from cold worked stainless steel.Contact your local Sales
Representative for optional information. The following tables list our
standard adapters with dimensions.

Adapter End Configuration

QS Series H High Pressure RH Reverse High

Pressure

M Medium Pressure P National Pipe Tapered

Ordering Procedure

Typical catalog number: 15 MA Q4 H9

15 MA Q4 H9
Pressure Male Available End Connections
(X 1000 psi) Adapter

*RH9 & RH14 - 40,000 psi (2758 bar), RH12 - 30,000 psi (2068 bar), RH16 - 26,000 psi (1793 bar), RH21 - 20,000 psi (1379 bar).

42
QS Series to Reverse High-Pressure Adapters

Catalog Connection Dimension inches (mm)

Connection
Number QS RH A Hex B

15MAQ4RH9 QS250 9/16 0.63 (15.9) 1.70 (43.2)

A
15MAQ6RH9 QS375 9/16 .75 (19.1) 1.81 (46.2)
15MAQ9RH9 QS562 9/16 1.19 (30.1) 2.25 (57.1)
15MAQ9RH12 QS562 3/4 1.19 (30.1) 2.38 (60.3)
15MAQ9RH16 QS562 1 1.19 (30.1) 2.56 (65.1) B

QS Series to High-Pressure Adapter

Catalog Connection Dimension inches (mm)

Connection
Number QS H/P A Hex B

15MAQ9H4 QS562 1/4 0.75 (19.1) 2.00 (50.8)

QS Series to NPT Adapter

Catalog Connection Dimension inches (mm)

Connection
Number QS NPT A Hex B

15MAQ6P4 QS375 1/4 1.19 (30.1) 2.44 (62.0)

43
Tools, Installation, Operation and Maintenance - QSS Assembly Procedure
QSS Assembly Procedure

Fast, Positive Sealing for Pressures up to Torque values can be used for both initial setting and reas-
15,000 psi (1034 bar) sembly connections. See the following page for reassembly
1/4 & 3/8 Tubing Size (Standard setting operation) values and ranges.
See next page for setting with hydraulic tool. Initial setting torque
(Setting with hydraulic tool is recommended but not required). ft-lbs (NM)
1/4 40 (54.3)
1. Cut tubing to length and deburr. Allow extra length for
3/8 80 (108.5)
proper engagement (per table below).
Outside Diameter Extra Allowance** Completed Connection
Tube Size for Engagement
inches (mm) inches (mm) The illustration below shows the condition of sleeve and tub-
ing after completion of sleeve setting. The sleeve has cut
1/4 (6.35) 0.75 (19.05)
into the tubing as it moved forward into the tapered seat, up-
3/8 (9.53) 0.81 (20.64) setting material ahead of it and establishing a shoulder on the
2. Slip gland and sleeve onto tubing. tubing to provide positive mechanical support for the tubing
end-load. A properly set sleeve cannot be displaced back and
Note: Be sure to remove gland and sleeve from components forth along the tubing but may be rotated around the tubing.
and slide them onto the tubing before inserting the tubing into
the components.
Make sure larger end of sleeve is toward gland.
Push tubing into valve or fitting until it bottoms. Lubricate Position
gland nut threads to aid in assembly. If process tolerable, a Reference

slight amount of inert grease on the nose of the compression

sleeve is recommended to improve sealability.

3. TIGHTEN GLAND NUT UNTIL SLEEVE BEGINS TO GRIP

TUBING.
Gland Nut
See Note **
4. Note starting position of wrench. Tighten gland nut Larger end of sleeve
toward gland
1-1/4 turns to complete the QSS connection.*
Bite into tubing
Fitting
exaggerated for clarity
Step 1 Step 2
Reassembly
To reassemble a 1/4 or 3/8 connection, insert tubing with
sleeve and gland nut into valve or fitting. Tighten gland nut
until the sleeve begins to grip tubing. Tighten gland with a
wrench 1/4 of a turn for a gas-tight seal. After frequent reas-
semblies, it may take less than 1/4 turn to affect a gas-tight
seal and as little as 1/8 of a turn may be sufficient.

* No special torque wrenches or mandrels required.

Fast, Positive Sealing for Pressures up to Step 1 Step 2

15,000 psi (1034 bar)
Hydraulic Set Tool Assembly
1. Cut tubing to length and deburr. Allow extra length for proper
engagement (per table below).
Outside Diameter Tube Size Extra Allowance for Engagement**
inches (mm) inches (mm)
1/4 (6.35) 0.75 (19.05)
3/8 (9.53) 0.81 (20.64)
9/16 (14.27) 1.25 (31.75)
3/4 (19.04) 1.63 (41.28) Step 3 Step 4

2. Slip gland nut and sleeve onto tubing. Lubricate the nose of the
compression sleeve with a metal to metal lubricant. We recom-
mend Jetlube MP-50. Make sure larger end of sleeve is toward
gland nut. Push tubing into hydraulic set tool until it bottoms into
the setting die.
3. Thread gland nut into cap until the hex touches the top surface.
4. Pressurize cylinder up to the set pressure (per table below.)
DO NOT EXCEED THE SET PRESSURE. Step 5 Step 6
AS WITH ALL HIGH PRESSURE EQUIPMENT, USE CAUTION
DURING OPERATION. SET TOOL MAWP IS 10,000 PSI (690 BAR).
Outside Diameter Tube Size Set Pressure for Full Tubing Bite
inches (mm) psi (bar)
1/4 (6.35) 3/8 (9.53) 9/16 (14.27) 4500 (310) to 5000 (344)
3/4 (19.04) 8000 (552) to 10000 (690)

Vent all presssure from hydraulic cylinder. Remove gland as-

sembly from preset tool and inspect biting end of sleeve. Looking
inside the biting end of the sleeve you should see a shoulder Completed Connection
pushed up from the tubing material. A properly set sleeve must The hydraulically set sleeve has cut into the tubing as it
spin freely 360 to achieve a seal. If the sleeve is seized in place moved forward into the tapered seat, upsetting material ahead
after setting, discard and make another. Do not set a sleeve of it and establishing a shoulder on the tubing to provide posi-
more than once. tive mechanical support for the tubing end-load. A properly
5. Install gland assembly into valve/fitting. If process tolerable, set sleeve cannot be displaced back and forth along the tubing
a slight amount of inert grease on the nose of the compression but may be rotated around the tubing.
sleeve should be used to aid sealing. Lubrication of gland threads Reassembly
will also aid in assembly. To reassemble a connection, insert tubing with sleeve and gland
TIGHTEN GLAND NUT UNTIL SLEEVE BEGINS TO GRIP TUBING. nut into valve or fitting.
6. Note starting position of wrench. Tighten gland nut 1/4 turn Install gland into valve/fitting.
to complete the QSS connection. Since the mechanical bite has TIGHTEN GLAND NUT UNTIL SLEEVE BEGINS TO GRIP TUBING.
already been completed with the hydraulic set tool, it is permis- Note starting position of wrench. Tighten gland nut 1/4 turn
sible to vary the torque to achieve sealing. to complete the QSS connection.
If torque values are required, use the following: ** Distance tubing protrudes into connection from face of fitting.
Size Required Torque Max. Torque Torque Wrench Adapter

A small blind hole on the face of the gland is provided for a
(in) ft-lbs (Nm) ft-lbs (Nm) Adapter Size Part # starting position reference.
1/4 30 (40.7) 50 (67.8) 5/8 P-1683 Parker Autoclave Engineers Medium Pressure tubing is required
3/8 35 (47.5) 80 (108.5) 3/4 P-9813 for these connection components.
9/16 90 (122.0) 135 (183.0) 1-3/16 P-1689
When assembling tubing into fittings such as in rack systems,
3/4 175 (237.3) 250 (339.0) 1-1/2 P-6040
alignment of tubing is critical in connection make up.
Do not force into alignment with connections as bending stress
will effect the sealing capability of the connections. 45
Tools, Installation, Operation and Maintenance - Hydraulic Sleeve Set Tool
Hydraulic Sleeve Set Tool

The Parker Autoclave Engineers hydraulic sleeve set tool Tooling Installation and Changing Sizes
is designed for use with the QS Series glands, sleeves and To change tooling to another size only requires interchanging
Parker Autoclave Engineers tubing. This tool is required to set 2 parts.
the sleeve for the 9/16 and 3/4 sizes and suggested for the
1/4 and 3/8 sizes. It not only produces the required bite into 1. Loosen the 5/16" set screw that locks the threaded cap from
the tubing, it is much easier than trying to set the sleeve the rotating.
conventional method. 2. Using a 5/32" hex key to rotate and remove the threaded
The tool comes in a self contained portable, lockable case steel cap from the aluminum housing.
complete with hand or air pump, cap and dies for all sizes. 3. Turn the tool assembly upside down the remove the die
from inside the housing.
4. Install the die of the appropriate connection size you wish
to use. The solid side of the die should be facing down
towards the hydraulic cylinder.
5. Install the appropriate size cap to match the size of the die.
Insert cap with the 5/32" hex up. Rotate with a 5/32" hex key
until it bottoms out on the shoulder side of the housing.
6. Thread in the 5/16" set screw until it bottoms out on the
cap threads. Tighten set screw to prevent movement
during use.

Cap

Die
Features
Case Dimensions: 28W x 14.25H x 13.75D (711cm x
362cm x 292cm) Housing

Total Weight: 69 lbs. (31 Kg)

Hand Pump: Single stage hydraulic (standard)
Hydraulic Cylinder: 10,000 psi, 2.5 25 ton
Hydraulic
Base & Housing: Aluminum anodized Cylinder
Hose Connection
Die and Cap: Precision hardened steel 3/8 NPT

Gauge: 15,000 psi (1034 bar)

Air-operated hydraulic pump option can be furnished in
Base
place of standard hand pump. (Add -A to order number).
Operating pressure 0 to 10,000 psi (0 to 690 bar).
Required air presssure, 30 psi (2.1 bar) minimum 120
psi (8.3 bar) maximum. Reservoir capacity: 24 cu. in.
(393cm3). Air lubricator/air separator is recommended for
air operated units.

46
Ordering Information
HST-912: Complete tool kit with hand pump (shown in photo)
HST-912TW: Complete tool kit with torque wrench and adapters
HST-912A: Complete tool kit with air-operated pump (Air operated
pump #P-1948)
HST-912ATW: Complete tool kit with torque wrench and adapters

Description Part #
Hydraulic Cylinder 90588
Gauge 90594
Adapter 90593
Base 101F-3407
Housing 101F-3408
Hydraulic Pump P-1893
Hose P-1894
1/4 Die HSTD4
1/4 Cap HSTC4
3/8 Die HSTD6
3/8 Cap HSTC6
9/16 Die HSTD9
9/16 Cap HSTC9
3/4 Die HSTD12
%
3/4 Cap HSTC12 7KUHDG
$ ' ULO
O
Tool Chest P-10011 )

Moly Paste P-9766

&
(TW) Kits with torque and adapters '
(

20 to 150 ft-lbs (27-203 Nm) Torque Wrench P-1680

75 to 250 ft-lbs (102-339 Nm) Torque Wrench 91020
5/8 wrench adapter P-1683 *
3/4 wrench adapter P-9813
1-3/16 wrench adapter P-1689
1-1/2 wrench adapter P-6040

Tools, Installation, Operation and Maintenance - Tube Connection Dimensions

Tube Connection Dimensions

Parker Autoclave Engineers Quick Set QS*

Tube Dimensions inches (mm)
Outside Connection
Diameter Type
(inches) A B C D E F G

1/4 QS250 29/64 (11.5) 1/2 -20 0.34 (8.6) 0.44 (11.1) 0.69 (17.5) 0.34 (8.6) 0.254 (16.4)

3/8 QS375 37/64 (14.7) 5/8 -18 0.38 (9.7) 0.47 (11.9) 0.75 (19.1) 0.48 (12.1) 0.380 (9.6)

9/16 QS562 7/8 (22.2) 15/16 -16 0.57 (14.5) 0.70 (17.8) 1.12 (28.5) 0.71 (18.0) 0.568 (14.2)
Weep
3/4 QS750 1-3/16 (30.15) 1-1/4 -18 0.82 (20.8) 1.00 (25.4) 1.56 (39.6) 0.94 (23.9) 0.75 (19.1) Hole

*For port diameter please see orifice sizes for specific valves and fittings. All threads are manufactured to a class 2A or 2B fit.
47
WARNING
FAILURE, IMPROPER SELECTION OR IMPROPER USE OF THE PRODUCTS AND/OR SYSTEMS DESCRIBED HEREIN OR RELATED ITEMS CAN CAUSE DEATH, PERSONAL INJURY AND PROPERTY DAMAGE.
This document and other information from Parker Hannifin Corporation, its subsidiaries and authorized distributors provide product and/or system options for further investigation by users having technical
expertise. It is important that you analyze all aspects of your application and review the information concerning the product or system in the current product catalog. Due to the variety of operating conditions
and applications for these products or systems, the user, through its own analysis and testing, is solely responsible for making the final selection of the products and systems and assuring that all performance,
safety and warning requirements of the application are met. The products described herein, including without limitation, product features, specifications, designs, availability and pricing, are subject to change by
Parker Hannifin Corporation and its subsidiaries at any time without notice.

Offer of Sale
The items described in this document are available for sale by Parker Hannifin Corporation, its subsidiaries or its authorized distributors. Any sale contract entered by Parker will be governed by the provisions
stated in Parker's standard terms and conditions of sale (copy available upon request).

2013 Parker Hannifin Corporation | Autoclave Engineers is a registered trademark of the Parker Hannifin Corporation 02-1253BE January2013

Caution! Do not mix or interchange parts or tubing with those of

other manufacturers. Doing so is unsafe and will void warranty.

The world leader in

high pressure valves,
fittings and tubing
Since its inception in 1945, Parker Autoclave Engineers (P-AE) has
been dedicated to manufacturing high pressure valving systems which
operate safely and reliably under extreme variations in temperature,
pressure and environmental conditions. Today, Parker Autoclave
Engineers is a world leader in providing dependable high pressure
valves, fittings and tubing, and serving applications in high pressure
industries.
While Parker Autoclave Engineers valves, fittings and tubing are
known industry wide for their ability to operate at pressures in excess
of 100,000 psi (6895 bar), a low pressure line for applications rated
to 15,000 psi (1034 bar) is also available. Utilizing single ferrule
compression sleeves which provide easy, leak free performance, the
connection sizes come in 1/16 to 1/2 inches.
Low Pressure Valves, Fittings and Tubing
All Parker Autoclave Engineers low pressure valves incorporate a ris-
ing stem/block design while the non-rotating feature of the stem pre-
vents galling. In addition, the valves are designed with metal to metal
seating for bubble tight shut-off, long stem/seat life even in abrasive
flow conditions and excellent overall corrosion resistance.
Three styles of low pressure valves are offered. The 10V, SW and
MVE/MV series.
Pattern Options:
2-Way Straight
2-Way Angle
3-Way/2 on Pressure
3-Way/1 on Pressure
2-Way Angle with Replaceable Seat (not available in MVE/MV)
3-Way/2 Stem Manifold
Three different stem types are available. A vee stem is chosen when
the application calls for direct on-off, metal to metal shut-off with fast
opening capabilities. If an application calls for tighter flow control,
Parker Autoclave Engineers offers a non-rotating regulating stem. For
the most precise flow control, Parker Autoclave Engineers
recommends a micro metering stem design.
A complete line of tubing and fittings, as well as special items are
available, providing all components required for our low pressure line.
Parker Autoclave Engineers has engineered an
Parker Autoclave Engineers components are offered in 316SS stan-
advanced single ferrule fitting system called the
dard, but can be ordered in a variety of optional materials such as:
QSS-Quick Set System. This 1/4" through 1" O.D.
Hastelloy B and C, Inconel, Monel, Nickel or Titanium. heavy -walled, high flowing tubing system operates
For more information or to order a complete VFT Catalog, contact your in all sizes up to 15,000 psi (1034 bar).
Parker Autoclave Engineers representative or the factory direct at For more information, order a complete catalog
814-860-5700. or contact your Parker Autoclave Engineers
representative.
2
Manual Shut-off Valves
Parker Autoclave Engineers valves are designed to operate safely and reliably at pressures to 150,000 psi (10342
bar). Several important features make this dependable service possible under widely varying conditions.

Non-rotating stem
Stem - can be re-adjusted Handles - powder
Prevents stem/seat galling when valve is to minimize backlash while coated stainless steel.
opened and closed. valve is in service.

Metal-to-Metal seating Packing gland - nickel-plated

aluminum-bronze minimizes
Provides bubble-tight shut-off, longer stem/ stem operating torque. Positive locking device - prevents
inadvertent unthreading of bonnet.
seat life in abrasive flow, greater durability for Stainless steel bear-
ing washer -
repeated on/off cycles and excellent silver-plated to minimize
corrosion resistance. stem friction.
Panel mounting screw holes
Bracket mounting holes - - standard on every valve.

PTFE encapsulated packing

standard on every valve.

Cold-worked bodies - permit Packing below stem

Ensures dependable stem and body sealing. high pressures in a smaller threads - adjustable;
The stem sleeve and packing gland materials block size, and also extend separates threads and
thread lubricants from
valve service life.
extend thread life and reduce the handle process fluid.
torque required to operate the valve. Non-rotating one piece
stems - prevent galling and
scoring of stem and seat;
Manual valve options provide repeatable
bubble-tight shut-off.
Enables you to customize Parker Autoclave
Engineers valves to meet your specific appli-
cation. Five different body patterns, a variety
of materials and stem types, extreme tem- Vee or regulating
perature models, abrasive service options, End connections - coned-and-threaded stem tips available.
w/optional anti-vibration collet gland
panel mounting and several handle styles assemblies Model 20SM9071 shown.
are among the available options.

O.D. Pressure *Rated Valve

Tube Size Rating Cv Stem 2-Way 2-Way 3-Way 3-Way 2-Way Angle 3-Way
In. (mm) psi (bar) (full open) Type Straight Angle 2 On Pressure 1 On Pressure Replaceable Seat 2 Stem Manifold
1/4 20,000 .31 Vee 20SM4071 20SM4072 20SM4073 20SM4074 20SM4872 20SM4075
(6.35) (1380) Reg 20SM4081 20SM4082 20SM4083 20SM4084 20SM4882 20SM4085
3/8 20,000 .75 Vee 20SM6071 20SM6072 20SM6073 20SM6074 20SM6872 20SV6075
(9.53) (1380) Reg 20SM6081 20SM6082 20SM6083 20SM6084 20SM6882 20SM6085
9/16 20,000 1.30 Vee 20SM9071 20SM9072 20SM9073 20SM9074 20SM9872 20SM9075
(14.3) (1380) Reg 20SM9081 20SM9082 20SM9083 20SM9084 20SM9882 20SM9085
3/4 20,000 2.50 Vee 20SM12071 20SM12072 20SM12073 20SM12074 20SM12872 20SM12075
Medium (19.1) (1380) Reg 20SM12081 20SM12082 20SM12083 20SM12084 20SM12882 20SM12085
Pressure 1
(25.4)
20,000
(1380)
4.40 Vee
Reg
20SM16071
20SM16081
20SM16072
20SM16082
20SM16073
20SM16083
20SM16074
20SM16084
20SM16872
20SM16882
20SM16075
20SM16085
9/16 10,000 1.75 Vee 10SM9071 10SM9072 10SM9073 10SM9074 10SM9872 10SM9075
(14.30) (690) Reg 10SM9081 10SM9082 10SM9083 10SM9084 10SM9882 10SM9085
3/4 10,000 2.80 Vee 10SM12071 10SM12072 10SM12073 10SM12074 10SM12872 10SM12075
(19.10) (690) Reg 10SM12081 10SM12082 10SM12083 10SM12084 10SM12882 10SM12085
1 10,000 5.20 Vee 10SM16071 10SM16072 10SM16073 10SM16074 10SM16872 10SM16075
(25.40) (690) Reg 10SM16081 10SM16082 10SM16083 10SM16084 10SM16882 10SM16085
1 30,000 2.60 Vee 30SC16071 30SC16072 30SC16073 30SC16074 30SC16872 30SC16075
(25.4) (2070) Reg 30SC16081 30SC16082 30SC16083 30SC16084 30SC16882 30SC16085
1/4 30,000 .12 Vee 30VM4071 30VM4072 30VM4073 30VM4074 30VM4872 30VM4075
(6.35) (2070) Reg 30VM4081 30VM4082 30VM4083 30VM4084 30VM4882 30VM4085
3/8 30,000 .23 Vee 30VM6071 30VM6072 30VM6073 30VM6074 30VM6872 30VM6075
(9.53) (2070) Reg 30VM6081 30VM6082 30VM6083 30VM6084 30VM6882 30VM6085
9/16 30,000 .33 Vee 30VM9071 30VM9072 30VM9073 30VM9074 30VM9872 30VM9075
High (14.3) (2070) Reg 30VM9081 30VM9082 30VM9083 30VM9084 30VM9882 30VM9085
Pressure 9/16
(14.3)
40,000
(2760)
.28 Vee
Reg
40VM9071
40VM9081
40VM9072
40VM9082
40VM9073
40VM9083
40VM9074
40VM9084
40VM9872
40VM9882
40VM9075
40VM9085
1/4 60,000 .08 Vee 60VM4071 60VM4072 60VM4073 60VM4074 60VM4872 60VM4075
(6.35) (4140) Reg 60VM4081 60VM4082 60VM4083 60VM4084 60VM4882 60VM4085
3/8 60,000 .09 Vee 60VM6071 60VM6072 60VM6073 60VM6074 60VM6872 60VM6075
(9.53) (4140) Reg 60VM6081 60VM6082 60VM6083 60VM6084 60VM6882 60VM6085
9/16 60,000 .14 Vee 60VM9071 60VM9072 60VM9073 60VM9074 60VM9872 60VM9075
(14.3) (4140) Reg 60VM9081 60VM9082 60VM9083 60VM9084 60VM9882 60VM9085
*CV Valves shown are for 2-way straight pattern. For 2-way angle, increase CV Valve 50%. Note: SM Series replaces 20SC Series
3
Air Actuators (for P-AE Manual Valves)
Three sizes of air operators (medium, heavy duty or extra heavy) are offered for remote on-off operation or
automatic operation of Parker Autoclave Engineers medium or high pressure valves. The actuators are available
in air-to-open (normally closed) and air-to-close (normally open) designs.

Ordering Procedure (Consult factory to insure proper selection)

To order a valve with an air operator, select the duty rating and type of the air operator from the chart below. Add the air
operator identifying suffix to the catalog number of the Parker Autoclave Engineers valve. To order a 2-way straight, 30VM vee
stem, 9/16 (14.3 mm) valve with a medium duty air-to-close air operator, specify: ex: 30VM9071-C1S for a yoke style piston air
actuated valve or 30VM9071-CM for an integral style diaphragm air operated valve.

Duty Type Ordering

Operator
Rating Suffix
Air-to-open OM
Diaphragm
Air-to-close CM
Medium
Air-to-open O1S
Piston
Air-to-close C1S
Air-to-open OH
Diaphragm
Air-to-close CH
Heavy
Air-to-open O2S
Piston
Air-to-close C2S
Extra Heavy Air-to-open HO1S
Piston
Single Stage Air-to-close HC1S
Extra Heavy Air-to-open HO2S
Piston
Two Stage Air-to-close HC2S

4
This table is designed to allow quick selection of an appropriate air actuator based on valve style and size,
maximum system operating pressure and maximum available air pressure. For example, if the system operating
pressure is 25,000 psi (1723 bar) and the available air pressure is 60 psi (4.1 bar) and an air-to-open (spring fail
closed) valve is required, a 30VM or 60VM valve with a heavy duty air operator can be used.

Air-to-close
Medium Heavy Extra Heavy Single Stage Extra Heavy Two Stage
Valve O.D. System Air System Air System Air System Air
Series Tube Press. Press. Press. Press. Press. Press. Press. Press.
in. (mm) psi (bar) psi (bar) psi (bar) psi (bar) psi (bar) psi (bar) psi (bar) psi (bar)
9/16 8,600 100 10,000 55 10,000 45 10,000 20
(14.3) (593) (6.9) (690) (3.8) (690) (3.10) (690) (1.4)
3/4 4,800 100 10,000 100 10,000 70 10,000 35
10SM (19.1) (331) (6.9) (690) (6.9) (690) (4.83) (690) (2.4)
1 2,800 100 6,300 100 8,500 95 10,000 55
(25.4) (193) (6.9) (434) (6.9) (586) (6.55) (690) (3.79)
1/4 20,000 95 20,000 50 __ __ __ __
(6.35) (1380) (6.5) (1380) (3.5)
3/8 19,000 100 20,000 55 __ __ __ __
(9.53) (1310) (6.9) (1380) (3.8)
9/16 10,700 100 20,000 85 20,000 65 20,000 30
20SM (14.3) (734) (6.9) (1380) (5.9) (1380) (4.48) (1380) (2.1)
3/4 6,100 100 13,600 100 19,000 100 20,000 50
(19.1) (421) (6.9) (938) (6.9) (1310) (6.90) (1380) (3.4)
1 3,900 100 8,800 100 12,500 100 20,000 75
(25.4) (269) (6.9) (607) (6.9) (862) (6.90) (1380) (5.1)
1 __ __ __ __ __ __ 30,000 80
30SC (25.4) (2068) (5.5)
1/4 30,000 55 30,000 30 __ __ __ __
(6.35) (2068) (3.8) (2068) (2.0)
3/8 30,000 75 30,000 40 __ __ __ __
30VM (9.53) (2068) (5.2) (2068) (2.8)
9/16 30,000 75 30,000 40 __ __ __ __
(14.3) (2068) (5.2) (2068) (2.8)
9/16 40,000 90 40,000 45 __ __ __ __
40VM (14.3) (2758) (6.2) (2758) (3.1)
1/4 60,000 75 60,000 40 __ __ __ __
(6.35) (4137) (5.2) (4137) (2.8)
3/8 60,000 75 60,000 40 __ __ __ __
60VM (9.53) (4137) (5.2) (4137) (2.8)
9/16 60,000 90 60,000 45 __ __ __ __
(14.3) (4137) (6.2) (4137) (3.1)

Air-to-open
9/16 7,900 95 10,000 75 10,000 60 10,000 40
(14.3) (545) (6.6) (690) (5.1) (690) (4.13) (690) (2.8)
10SM 3/4 __ __ __ __ 10,000 95 10,000 60
(9.1) (690) (6.55) (690) (4.1)
1 __ __ __ __ 6,500 100 10,000 85
(25.4) (448) (6.90) (690) (5.9)
1/4 20,000 95 20,000 50 __ __ __ __
(6.35) (1380) (6.6) (1380) (3.4)
3/8 18,250 95 18,250 50 __ __ __ __
(9.53) (1258) (6.6) (1258) (3.4)
20SM 9/16 9,800 95 15,700 75 20,000 85 20,000 55
(14.3) (676) (6.6) (1082) (5.1) (1379) (5.86) (1380) (3.8)
3/4 __ __ 6,000 75 15,000 100 20,000 80
(19.1) (414) (5.1) (1034) (6.90) (1380) (5.5)
1 __ __ 4,000 75 10,000 100 20,000 100
(25.4) (276) (5.1) (690) (6.90) (1380) (6.9)
1 __ __ __ __ __ __ 30,000 100
30SC (25.4) (2068) (6.9)
1/4 30,000 75 30,000 40 __ __ __ __
(6.35) (2068) (5.2) (2068) (2.8)
3/8 30,000 95 30,000 50 __ __ __ __
30VM (9.53) (2068) (6.5) (2068) (3.5)
9/16 30,000 95 30,000 50 __ __ __ __
(14.3) (2068) (6.5) (2068) (3.5)
9/16 40,000 100 40,000 55 __ __ __ __
40VM (14.3) (2758) (6.9) (2758) (3.8)
1/4 60,000 95 60,000 50 __ __ __ __
(6.35) (4137) (6.5) (4137) (3.5)
60VM 3/8
(9.53)
60,000
(4137)
95
(6.5)
60,000
(4137)
50
(3.5)
__ __ __ __

9/16 60,000 95 60,000 50

(14.3) (4137) (6.5) (4137) (3.5)

5
Couplings
The couplings shown here permit the joining of any combination of standard size Parker Autoclave Engineers
tubing with female-to-female couplings. Other couplings available on special order. See valve fitting and tubing catalog for
complete selection.
A B Connection
Connection
How to use the P-AE Medium Pressure P-AE High Pressure

Ordering Chart: Tube Conn. Pressure 1/4 3/8 9/16 3/4 1 1 1/4 3/8 9/16 9/16
Size Type psi*(bar) (6.35) (9.53) (14.3) (19.1) (25.4) (25.4) (6.35) (9.53) (14.3) (14.3)
in.(mm) SF250CX SF375CX SF562CX SF750CX SF1000CX F1000C43 F250C F375C F562C F562C40
1. Locate A connection in the
vertical column. 1/4 SF250 20,000 20FX 20F 20F 20F 20F 20F 20F 20F 20F
2. Locate the desired B connection
P-AE Medium Pressure
(6.35) CX (1380) 4466 4666 4966 41266 41666 41663 4463 4663 4963
across the top of the chart. 3/8 SF375 20,000 20FX 20F 20F 20F 20F 20F 20F 20F
(9.53) CX (1380) 6666 6966 61266 61666 61663 6463 6663 6963
3. The catalog number of the
required coupling is located at the 9/16 SF562 20,000 20FX 20F 20F 20F 20F 20F
(14.3) CX (1380) 9966 91266 91666 9463 9663 9963
intersection of the two columns.
3/4 SF750 20,000 20FX 20F 20F 20F 20F
(19.1) CX (1380) 12 121666 12463 12663 12963

1 SF1000 20,000 20FX 20F 20F 20F

(25.4) CX (1380) 16 16463 16663 16963

1 F1000 43,000 43F

(25.4) C43 (2964) 16
P-AE High Pressure

1/4 F250 60,000 43F 60F 60F 60F

A B (6.35) C (4140) 41633 4433 4633 4933
Connection Connection 3/8 F375 60,000 43F 60F 60F
FEMALE FEMALE (9.53) C (4140) 61633 6633 6933

9/16 F562C 60,000 43F 60F

(14.3) (4140) 91633 9333

9/16 F562 40,000 40F

(14.3) C40 (2758) 9933

Male/Female Adapters
Male/female adapters are designed to adapt a female connection direct to another size and/or type of connection.
In selecting an adapter involving two different sized connections, the larger connection should be on the male end where it is
possible to maximize the mechanical strength of the adapter. See valve fitting and tubing catalog for complete selection.

To use this chart: Female End

P-AE Medium Pressure
1/4(6.35) 3/8(9.53) 9/16(14.3) 3/4(19.1) 1(25.4) 1(25.4)
P-AE High Pressure
1/4(6.35) 3/8(9.53) 9/16(14.3) 9/16(14.3)
1. Locate MALE end in vertical SF250CX SF375CX SF562CX SF750CX SF1000CX F1000C43 F250C F375C F562C F562C40
column. Male Fits this Pres- 20,000 20,000 20,000 20,000 20,000 43,000 60,000 60,000 60,000 40,000
Female sure
2. Locate desired FEMALE end of End
Conn. psi*(bar) (1380) (1380) (1380) (1380) (1380) (2964) (4140) (4140) (4140) (2758)
adapter across top of chart.
1/4 SF250CX 20,000 20M46K6 20M49K6 20M412K6 20M416K6 20M44K3 20M46K3 20M49K3
3. Catalog number of required adapter (6.35) (1380)
P-AE Medium Pressure

is located at intersection of columns. 3/8 SF375CX 20,000 20M64K6 20M69K6 20M612K6 20M616K6 20M64K3 20M66K3 20M69K3
(9.53) (1380)

Other Adapters 9/16 SF562CX

(14.3)
20,000
(1380)
20M94K6 20M96K6 20M912K6 20M916K6 20M94K3 20M96K3 20M99K3

Parker Autoclave Engineers supplies

3/4 SF750CX 20,000 20M124K6 20M126K6 20M129K6 20M1216K6 20M1216K3 20M124K3 20M126K3 20M129K3 20M129K40
many other types of adapters on (19.1) (1380)
special orders. These include UniVersa- 1 SF1000CX 20,000 20M164K6 20M166K6 20M169K6 20M1612K6 20M1616K6 20M164K3 20M166K3 20M169K3
Lok swaged-type connections, sock- (25.4) (1380)
etweld to O.D. tube or nominal pipe size, 1 F1000C43 43,000 43M164B3 43M166B3 43M169B3 43M169B40
(25.4) (2964)
male or female AN connections and
P-AE High Pressure

others. 1/4
(6.35)
F250C 60,000
(4140)
20M44B6 20M46B6 20M49B6 20M412B6 60M46B3 60M49B3

Materials 3/8
(9.53)
F375C 60,000
(4140)
20M64B6 20M66B6 20M69B6 20M612B6 20M616B6 43M416B6 60M64B3 60M69B3
All Parker Autoclave Engineers adapt-
ers are precisionmachined from cold- 9/16 F562C 60,000 20M94B6 20M96B6 20M99B6 20M912B6 20M916B6 43M616B6 60M94B3 60M96B3
(14.3) (4140)
worked Type 316 stainless steel. Other
9/16 F562C40 40,000 20M912G6 43M916B6
materials available on special order. (14.3) (2758)

*Pressure Rating - The pressure rating of Parker Autoclave Engineers couplings is based on the lower rated connection used.

6
Fittings, Components & Accessories
Connection Sizes Pressure Rating Connection Styles
in. (mm) psi (bar)
Coned-and-threaded type for high
Medium 1/4 to 1 to 20,000
strength and repeated make-up.
Anti-vibration collet gland available.
Pressure (6.35 to 25.4) (1380)
In line collar and gland to minimize
block thickness.

Coned-and-threaded type for high

1 to 43,000
strength and repeated make-up.
(25.4) (2964)
Anti-vibration collet gland available.
High
Pressure Coned-and-threaded type for high
strength and repeated make-up.
1/4 to 9/16 to 60,000
(6.35 to 14.3) (4140) Anti-vibration collet gland avail-
able. Nested collar and gland to
minimize block width.

O.D. Pressure
Tube Size Rating Straight Union Bulkhead
in. (mm) psi (bar) Elbow Tee Cross Coupling Coupling Coupling
1/4 (6.35) 20,000 (1380) CLX4400 CTX4440 CXX4444 20FX4466 20UFX4466 20BFX4466

Medium 3/8 (9.53)

9/16 (14.3)
20,000 (1380)
20,000 (1380)
CLX6600
CLX9900
CTX6660
CTX9990
CXX6666
CXX9999
20FX6666
20FX9966
20UFX6666
20UFX9966
20BFX6666
20BFX9966
Pressure 3/4 (19.1) 20,000 (1380) CLX12 CTX12 CXX12 20FX12 20UFX12 20BFX12
1 (25.4) 20,000 (1380) CLX16 CTX16 CXX16 20FX16 20UFX16 20BFX16
1 (25.4) 43,000 (2964) 43CL16 43CT16 43CX16 43F16 43UF16 43BF16

High 9/16 (14.3)

1/4 (6.35)
40,000 (2760)
60,000 (4140)
40CL9900
CL4400
40CT9990
CT4440
40CX9999
CX4444
40F9933
60F4433
40UF9933
60UF4433
40BF9933
60BF4433
Pressure 3/8 (9.53) 60,000 (4140) CL6600 CT6660 CX6666 60F6633 60UF6633 60BF6633
9/16 (14.3) 60,000 (4140) CL9900 CT9990 CX9999 60F9933 60UF9933 60BF9933

Connection Check Line Safety

Components Valves Filters Heads

O.D. Pressure
Tube Size Rating
In. (mm) psi (bar) Gland Collar Plug O-Ring Ball Excess Flow Dual Disc Cup-Type Safety Heads
1/4 (6.35) 20,000 (1380) CGLX40 CCLX40 CPX40 CXO4400 CXB4400 CXK4402 - CXF4 CSX4600*
Medium 3/8 (9.53)
9/16 (14.3)
20,000 (1380)
20,000 (1380)
CGLX60
CGLX90
CCLX60
CCLX90
CPX60
CPX90
CXO6600
CXO9900
CXB6602
CXB9900
CXK6602
CXK9902
-
CLFX9900
CXF6
CXF9
CSX6600*
CSX9600*
Pressure 3/4 (19.1) 20,000 (1380) CGLX120 CCLX120 CPX120 CXO12 CXB12 CXK1202 - CXF12 -
1 (25.4) 20,000 (1380) CGLX160 CCLX160 CPX160 CXO16 CXB16 CXK1602 - CXF16 -
1 (25.4) 43,000 (2964) CGLX160 CCLX160 43CP160 43CO16 43CB16 - - - -
High 9/16 (14.3)
1/4 (6.35)
40,000 (2760)
60,000 (4140)
AGL90
AGL40
ACL90
ACL40
AP90
AP40
-
CKO4400
-
CB4401
-
CK4402
-
CLF4400
-
CF4
-
CS4600*
Pressure 3/8 (9.53) 60,000 (4140) AGL60 ACL60 AP60 CKO6600 CB6601 CK6602 CLF6600 CF6 CS6600*
9/16 (14.3) 60,000 (4140) AGL90 ACL90 AP90 CKO9900 CB9901 CK9902 CLF9900 CF9 CS9600*

*Indicate size of rupture disc.

7
Tubing
Parker Autoclave Engineers offer a complete selection of Austenetic,
cold drawn stainless steel tubing designed to match the performance
standards of Parker Autoclave Engineers valves and fittings.
Parker Autoclave Engineers tubing is manufactured specifically
for high pressure applications requiring both strength and corrosion resistance.
The tubing is furnished in random lengths between 20 and 26.5 feet
(6.1 and 8.0 meter).

Inspection and Testing

Parker Autoclave Engineers tubing is inspected to assure its free of seams, laps, fissures
or other flaws, as well as carburization or intergranular carbide precipitation. The outside
and inside diameters of the tubing are subject to special inspection and are controlled
within close tolerances to assure proper fit. Sample pieces of tube for each lot are tested to
confirm mechanical properties. Hydrostatic testing is also performed on a statistical basis and is
conducted at the working pressure of the tube. Parker Autoclave Engineers will perform 100% hydrostatic
testing at additional cost if desired.
Fits Tube Size in.(mm) Wall Thick- Flow Working Pressures psi (bar)
Catalog Tube Connection O.D. I.D. ness nom. Area -325 to 100F 200F 400F 600F 800F
Number Material Type In. (mm) In. (mm) in. (mm) in.2 (mm2) (-198 to 38C) (93C) (204C) (316C) (427C)
20,000 20,000 19,250 18,050 16,800
MS15-092 316SS (1380) (1380) (1330) (1250) (1160)
1/4 .109 .070 .009
SF250CX (6.35) (2.77) (1.78) (5.81) 20,000 18,950 17,200 17,000 16,150
MS15-192 304SS (1380) (1310) (1190) (1170) (1110)
20,000 20,000 19,250 18,050 16,800
MS15-093 316SS (1380) (1380) (1330) (1250) (1160)
3/8 .203 .086 .032
SF375CX (9.53) (5.16) (2.18) (20.6) 20,000 20,000 19,250 18,050 16,800
MS15-193 304SS (1380) (1380) (1330) (1250) (1160)

MS15-085 316SS 20,000 20,000 19,250 18,050 16,800

9/16 .312 .125 .076 (1380) (1380) (1330) (1250) (1160)
SF562CX (14.3) (7.92) (3.17) (49)
MS15-187 304SS 20,000 20,000 19,250 18,050 16,800
(1380) (1380) (1327) (1250) (1160)
MS15-097 316SS 15,000 15,000 14,400 13,650 12,670
9/16 .359 .101 .101 (1034) (1034) (992) (941) (874)
SF562CX (14.3) (9.12) (2.56) (65.2)
MS15-194 304SS 15,000 14,170 12,900 12,750 12,670
(1034) (977) (890) (880) (874)
MS15-095 316SS .438 .156 .151 20,000 20,000 19,250 18,050 16,800
3/4 (11.1) (3.96) (97.4) (1380) (1380) (1330) (1250) (1160)
SF750CX
(19.1) .516 .117 .209 15,000 15,000 14,400 13,650 12,670
MS15-098 316SS
(13.1) (2.97) (135) (1034) (1034) (993) (941) (874)
MS15-096 316SS .562 .219 .248 20,000 20,000 19,250 18,050 12,670
1 (14.3) (5.56) (160) (1380) (1380) (1330) (1250) (874)
SF1000CX
(25.4) .688 .156 .371 15,000 15,000 14,400 13,650 12,670
MS15-099 316SS
(17.5) (4.02) (239) (1034) (1034) (992) (941) (874)

MS15-081 316SS 60,000 60,000 57,750 54,250 50,700

MS15-083 316SS 60,000 60,000 57,750 54,250 50,700

9/16 .187 .187 .028 (4140) (4140) (3980) (3740) (3490)
F562C (14.3) (4.78) (4.78) (18)
MS15-185 304SS 60,000 56,800 51,650 50,700 48,450
(4140) (3910) (3560) (3500) (3340)
1 .438 .281 .151 43,000 43,000 43,000 41,380 36,330
MS15-211 316SS -- (25.4) (11.1) (7.14) (97.4) (2964) (2964) (2964) (2853) (2504)

Note: For autofrettage tubing, add suffix ESR42 to the tubing part number.

8
Coned-and-threaded Nipples
For rapid system make-up, Parker Autoclave Engineers
supplies pre-cut, coned-and-threaded nipples in various
sizes and lengths for Parker Autoclave Engineers valves
and fittings.

Special lengths
In addition to the standard lengths listed in the table
below, nipples are available in any custom length.
Consult factory.

Materials
Catalog numbers in table refer to Type 316 stainless steel, unless specified.
Working Tube Size in.(mm) Catalog Number
Fits Pressure at
Connection 100F(38C) 2.75 3 4 6 8 10 12
Type O.D. I.D. psi(bar) Length Length Length Length Length Length Length
SF250CX 1/4 (6.35) .109 (2.77) 20,000 (1380) CNX4402 CNX4403 CNX4404 CNX4406 CNX4408 CNX44010 CNX44012
SF375CX 3/8 (9.53) .203 (5.16) 20,000 (1380) CNX6603 CNX6604 CNX6606 CNX6608 CNX66010 CNX66012
SF562CX 9/16 (14.3) .312 (7.92) 20,000 (1380) CNX9904 CNX9906 CNX9908 CNX99010 CNX99012
SF562CX 9/16 (14.3) .359 (9.12) 15,000 (1034) CNLX9904 CNLX9906 CNLX9908 CNLX99010 CNLX99012
SF750CX 3/4 (19.1) .438 (11.1) 20,000 (1380) CNX1204 CNX1206 CNX1208 CNX12010 CNX12012
SF750CX 3/4 (19.1) .515 (13.1) 15,000 (1034) CNLX1204 CNLX1206 CNLX1208 CNLX12010 CNLX12012
SF1000CX 1 (25.4) .562 (14.3) 20,000 (1380) CNX1606 CNX1608 CNX16010 CNX16012
SF1000CX 1 (25.4) .688 (17.5) 15,000 (1034) CNLX1606 CNLX1608 CNLX16010 CNLX16012
F250C 1/4 (6.35) .083 (2.11) 60,000 (4140) CN4402 CN4403 CN4404 CN4406 CN4408 CN44010 CN44012
F375C 3/8 (9.53) .125 (3.18) 60,000 (4140) CN6603 CN6604 CN6606 CN6608 CN66010 CN66012
F562C 9/16 (14.3) .187 (4.78) 60,000 (4140) CN9904 CN9906 CN9908 CN99010 CN99012
F562C40 9/16 (14.3) .250 (6.35) 40,000 (2760) 40CN9904-316 40CN9906-316 40CN9908-316 40CN99010-316 40CN99012-316
F1000C43 1 (25.4) .438 (11.1) 43,000 (2964) 43CN1606 43CN1608 43CN16010 43CN16012

Note: Add -316 or -304 to catalog number for material choice if not shown.

Anti Vibration Collet Gland Assemblies

Vibration and/or shock can be present in tubing systems, especially if the valve or fitting happens to be located
on an unsupported line near a compressor. For this reason, Parker Autoclave Engineers coned-and-threaded
connections are offered with the Parker Autoclave Engineers Anti-Vibration Collet Gland Assemblies. Completely
interchangeable with standard Parker Autoclave Engineers high pressure connections, the Collet Gland Assem-
blies provide equally effective pressure handling capability.

Catalog Number Gland Nut

Gland Nut
O.D. Slotted collet
Tubing Medium High Collet grips Slotted collet
Size Pressure Pressure tubing here for
Valve or
Collet body
in. (mm) to 20,000 to 60,000 anti-vibration
fitting body
support
Valve or
fitting body
1/4 (6.35) KCBGLX40-316MC KCGL40-316 Collet grips
tubing here for
3/8 (9.53) KCBGLX60-316MC KCGL60-316 Collar*
anti-vibration
support

9/16 (14.3) KCBGLX90-316MC KCGL90-316 Line contact

sealing
Collar*

Line contact
3/4 (19.1) KCBGLX120-316MC - sealing

Series KCBGLX Series KCGL

1 (25.4) KCBGLX160-316MC KCBGLX160-316MC Pressures to 20,000 psi (1380 bar) Pressures to 60,000 psi (1440 bar)

1 High Pressure to 43,000 psi (2964 bar) *AE Collar not included in complete assembly.

9
P-AE Instrument Quality Gauges
Materials and features
Accuracy within 0.5% of full scale range
Plastic dial cover/solid front aluminum alloy case
Blow-out back panel for pressure relief in the event of Bourdon tube failure
316 Stainless steel Bourdon tubes**
Precision stainless steel movement for accuracy and resistance to atmospheric corrosion
Pointer zero adjustment located on front of gauge behind dial cover for convenience

Instrument quality gauges

Flush panel mounting - Panel mounting kits are stocked to permit flush panel mounting of any instrument quality
gauge. These will be furnished at an additional charge when specified on order -- add PM to order number.
Optional electrical contact face - Available for all instrument quality gauges. With adjustable low and high
electrical contacts, this option permits gauges to provide pressure control for automatic or remote
operation, or for fail-safe set points.
** Bourdon Tube material for 0-80,000 psi (0-5116 bar) and 0-50,000 psi (0-3447 bar) gauge is Inconel 718.
Bourdon Tube material for 0-30,000 psi (0-2068 bar) gauge is K Monel.

Note: Gauges available with back 1/4" (F250C)

Coned-and-Threaded Connection
connections. Add B to the base catalog Furnished with Collar and Gland
number. Ex: P-047B-CG

Calibrated in psi Only

Minor
Catalog Pressure Interval Dial
Number Range Value Diameter
(psi) (psi) (inches)

P-0499-CG 0-1000 10 4-1/2

P-0479-CG 0-1500 10 4-1/2
P-0480-CG 0-3000 20 4-1/2
P-0481-CG 0-5000 50 4-1/2
P-0482-CG 0-10,000 100 4-1/2
P-0483-CG 0-15,000 100 4-1/2
P-0487-CG 0-20,000 200 4-1/2
P-0488-CG** 0-30,000 200 6
P-0489-CG** 0-50,000 500 6
P-0490-CG** 0-80,000 1,000 6

Optional Electrical Contact Face

Fits Gauge Dial Diameter
Catalog Number (inches)
P-0713 4-1/2
P-0714 6

10
Specialty Products
Ball Valves
Parker Autoclave Engineers ball valves are designed for
on-off, high flow applications. With the valve fully open the
straight-through design minimizes pressure drop.
Parker Autoclave Engineers ball valves are economical
and easy to maintain for long service life. One piece,
trunnion mounted style stem design eliminates
shear failure and reduces the effects of side
loading found in two piece designs. Seat glands
may be retightened for extended use.
Operating torque is low to reduce wear and
extend the life of parts.
The Parker Autoclave Engineers ball valve is
designed to operate safely at pressures up to
20,000 psi @ 200 F (1380 bar @ 93 C) and
temperatures up to 500 F @ 5,000 psi (260 C @ 345 bar).

Parker Autoclave Engineers Ball Valves are available

in 2 and 3 way designs with orifice sizes of .187 to .500 (4.7 mm to 12.7
mm). Features include 316SS construction, PEEK seats, one piece
trunnion stems and low friction stem seals.

Series RVP & RVS

Series RVP & RVS relief valves provide reliable venting of gases or liquids for set
pressures from 1,500 psi (103 bar) to 60,000 psi (4140 bar). Standard temperature
range on RVP models is -423 F to 400 F (-253 C to 204 C). High temperature option
to 750 F (400 C) also available. Temperature range on RVS model is 32 F to 400 F
(0 C to 204 C). (Note: Seat material is Arlon).
These precision valves are designed for pressure gas systems, cryogenic systems,
petrochemical applications and other special systems. They are capable of handling
air, gases, steam, vapor and liquids. They are not recommended for steam boiler
applications and are not ASME code stampable.
Relief valves are designed to open proportionally to increasing back pressure and,
therefore, are not recommended for applications requiring immediate full valve flow at
set pressure (such as decompositions, polymerizations, etc.). Full flow of relief valve
is defined at 10% over set pressure.

Connection
Size & Type Pressure Rating
(inches) PSIG @ 100F (bar @ 38C)

Catalog Inlet Outlet Orifice Min Max Max

Number FNPT in. (mm) Set Set Back
5RVP9072 SF562CX 3/4 (19.1) .312 (7.92) 3,000 (207) 5,000 (345) 500 (34.5)
10RVP9072 SF562CX 3/4 (19.1) .250 (6.35) 5,000 (345) 10,000 (690) 500 (34.5)
15RVP9072 SF562CX 3/4 (19.1) .188 (4.78) 10,000 (689) 15,000 (1034) 500 (34.5)
20RVP9072 SF562CX 3/4 (19.1) .156 (4.02) 15,000 (1034) 20,000 (1379) 500 (34.5)
30RVP6072 F375C 3/4 (19.1) .125 (3.18) 20,000 (1379) 30,000 (2068) 500 (34.5)
45RVP9072 F562C 3/4 (19.1) .093 (2.36) 25,000 (1724) 45,000 (3103) 500 (34.5)
60RVP6072 F375C 3/4 (19.1) .078 (1.98) 30,000 (2060) 60,000 (4137) 500 (34.5)
Soft Seat
5RVS9072 SF562CX 3/4 (19.1) .312 (7.92) 1,500 (103) 5,000 (345) 500 (34.5)
10RVS9072 SF562CX 3/4 (19.1) .250 (6.35) 5,000 (345) 10,000 (690) 500 (34.5)
20RVS9072 SF562CX 3/4 (19.1) .156 (4.02) 10,000 (690) 20,000 (1379) 500 (34.5)

11
Specialty Products
Manifold Block
Specialty pressure manifolds minimize space requirements and reduce installation time necessary to plumb a
pressure system. In addition, by reducing the number of components used in a system, manifolds reduce the
number of potential leak joints.
Parker Autoclave Engineers will design and build pressure manifolds to meet specific installation, layout and pres-
sure requirements. These manifolds are capable of withstanding pressures from vacuum to 60,000 psi (4137 bar),
and are available in a variety of materials and sizes. Among the pressure connections that can be incorporated
are Parker Autoclave Engineers' low, medium and high pressure, NPT, SAE, BSP and others. Transitions in sys-
tem line sizes and tubing pressure series can be accomplished through a specialty manifold. These manifolds are
appropriate wherever pressure tubing systems are utilized.

12
Tools
P-AE Micrometer Adjustable Torque Wrench
P-1680 20 to 150 ft. lbs. (27 to 203 Nm)
91020 75 to 250 ft. lbs. (102 to 339 Nm)
Accurate tightening for all Parker Autoclave Engineers valve packing glands and tube nuts is essential. The
wrench can be adjusted to the ranges shown and is used with interchangeable wrench adapters for hex sizes
from 1/2" through 1-7/8". Part numbers for wrench adapters are listed on chart.

Packing Gland or 1/2 9/16 5/8 3/4 13/16 7/8 15/16 1 1-1/16 1-3/16 1-3/8 1-1/2 1-7/8
Tube Nut Hex Size
in. (mm) (12.7) (14.3) (15.9) (19.05) (20.6) (22.2) (23.8) (25.4) (27) (30.2) (34.9) (38.1) (47.6)

Wrench Adapter
Number P-1681 P-1682 P-1683 P-9813 P-1685 P-1686 P-1687 P-9901 P-1688 P-1689 P-1690 P-6040 P-10076

Hydraulic Tube Bender

For single pass bending of high pressure
tubing. The Parker Autoclave Engineers
hydraulic tube bender is designed to bend
heavy wall tubing quickly, accurately and
reliably with only one setup. The tube bender
is complete with pump, cylinder, frame and
bending shoes which are self-contained in a
portable, lockable case. (Order number: HTB)

Air operated hydraulic pump option available

in place of hand pump. (Order Number: HTB-A)

Coning and Threading Machine

Ordering Procedure: Model # AEGCTM-2
Separate heads for coning and threading are powered by a single motor and drive system. Available models cone
and thread Parker Autoclave Engineers medium and high pressure tubing.
Approximate dimensions: 56" high, 28" wide and 20" deep (1.4 m x .7 m x .5 m).
Shipping weight is 350 pounds (159 kg). Tooling ordered separately. Consult factory.
Features
One-half hp motor, 115 VAC 60 Hz (220 VAC 50 Hz) volt capacitor start.
No reversing necessary on threading operation; pop-open die prevents thread damage.
Complete tooling is available; specify tooling sizes required.
Coning head has feed wheel for easy, precision feeding.
Complete with oil pump and reservoir.
Unit mounted on stand complete with locking casters for ease of mobility and stability.
Available with optional reservoir heater
CE mark standard on 220 VAC 50 Hz models

13
Tools
Manual Coning & Threading Tools
Parker Autoclave Engineers manufactures a manual coning tool for optimum coning performance with tubing
sizes up to 9/16" (14.3 mm) O.D. This is a precision quality manual tool to permit on-site end preparation for
AE medium and high pressure tubing installations. Interchangeable collets for each size tubing provide proper
centering of tubing. The cutting feed arrangement permits the operator to control the depth of cut to assure
against work hardening effects. Interchangeable tool steel cutting blades are used in pairs to assure more
accurate and faster coning and are designed to square-off and finish the tube as the cone is completed.
There is a provision for applying metal cutting lubricants to the cutting zone.

The threading die holder is designed to hold the

appropriate die for any of the standard Parker
Autoclave Engineers tubing sizes through Coning tool
9/16 (14.3 mm) O.D. Interchangeable
guide bushings properly guide the tool for
accurate thread cutting.
Threading
Cutter support tool
Note: Complete tool kits are available.
Consult factory Feed nut

Coning tool
housing
Collet nut

Tube Size Coning Tools and Components Catalog Number Threading Tools and Components Catalog Number

Tool Tool
with Coning with Threading Die
O.D. I.D. Collet & Blades Die & Tool Guide
in.(mm) in.(mm) Blades Collet (set of 2) Bushing Only Order No. Size-type* Bushing
PAE Medium Pressure

1/4 (6.35) .109 (2.77) MCTM4 90248 101F-1577 402A 402 P-0214 1/4-28 1010-0343

3/8 (9.53) .203 (5.16) MCTM6 90250 101F-1601 402C 402 P-0215 3/8-24 1010-0344

9/16 (14.3) .312 (7.92) MCTM920 90251 1010-5218 402E 402 P-0216 9/16-18 1010-0345

9/16 (14.3) .359 (9.12) MCTM910 90251 101A-1897 402E 402 P-0216 9/16-18 1010-0345

1/4 (6.35) .083 (2.11) MCTH4 90248 101F-3939 402A 402 P-0214 1/4-28 1010-0343
PAE High Pressure

3/8 (9.53) .125 (3.18) MCTH6 90250 101F-1578 402C 402 P-0215 3/8-24 1010-0344

9/16 (14.3) .188 (4.78) MCTH960 90251 1010-0883 402E 402 P-0216 9/16-18 1010-0345

9/16 (14.3) .250 (6.35) MCTH940 90251 101C-7214 402E 402 P-0216 9/16-18 1010-0345

Cutting Oil: P-8784

All threads for PAE medium pressure and high pressure tubing are LH national fine (class 2).
Note: Manual coning and threading tools for 3/4" (19.1 mm) and 1" (25.4 mm) O.D. medium pressure tubing are not available. Model AEGCTM-2 Power
Coning-and-Threading Machine is recommended for this tubing. A minimum of 3" (76 mm) straight length is required to perform coning and threading operation
for manual coning tool.

14
Flow Calculations
Coefficient of flow (CV) for a valve is the volume of water in U.S. gallons per minute at room temperature...which
will flow through the valve with the stem fully open...with a pressure drop of 1 psi across the valve. CV is the valve
sizing factor that permits selection of the appropriate valve to meet the flow requirements of a given fluid system.

The CV values shown on the valve ordering pages represent the full-open CV for that valve. In determining
estimated capacity, this CV value should be used in the formulas which follow.

Flow Formulas
Liquids
V = CV P1 - P2
q Flow, U.S. gal./min. SGF
q Flow, lb./hr. W = 500 CV (P1 - P2) /SGF

Gases **
Q = 42.2 CV (P1 - P2) (P1 + P2)
q Flow, SCFH SGF
*
Q = 963 CV (P1 - P2) (P1 + P2)
q Flow, SCFH (temperature corrected)
SGF TF
*
q Flow, lb./hr. W = 3.22 CV (P1 - P2) (P1 + P2)/SG

Saturated Steam
*
q Flow, lb./hr. W = 2.1 CV (P1 - P2) (P1 + P2)

Super Heated Steam

*
W = 2.1 CV (P1 - P2) (P1 + P2)
q Flow, lb./hr.
(1 + 0.0007 TS)

Specific gravity (SG ) Specific gravity (SGF ) Formula

typical gases typical gases Nomenclature
SG @ RT SGF @ RT V = Flow, U.S. gallons per minute (GPM)
Gas Relative Gas Referred
to Air to Water Q = Flow, standard cu. ft. per hr. (SCFH)

W = Flow, pounds per hour (lb./hr.)

Acetylene 0.897 Acetone 0.792
Air 1.000 Alcohol 0.792 P1 = Inlet pressure, psia (14.7 + psig)

Ammonia 0.587 Benzine 0.902 P2 = Outlet pressure, psia (14.7 + psig)

Argon 1.377 Gasoline 0.751 SGF = Liquid specific gravity (water = 1.0)
Butane 2.070 Gasoline, nat. 0.680
SG = Gas specific gravity (air = 1.0)
Carbon dioxide 1.516 Kerosene 0.815
TF = Flowing temp., R absolute (460 + F)
Ethylene 0.967 Pentane 0.624
TS = Superheat in F
Helium 0.138 Water 1.000
Hydrogen 0.0695 CV = Valve coefficient of flow, full open

Methane 0.553
*Effect of flowing temperatures on gas flow are minimal for temperatures between 30F
Nitrogen 0.966 and 150F. Correction should be included if temperatures are higher or lower.
Oxygen 1.103 **Where outlet pressure P2 is less than 1/2 inlet pressure P1, the term:
Propane 1.562 (P1 - P2) (P1 + P2): becomes 0.87 P1.
Sulpher dioxide 2.208
Note: Maximum CV values in this catalog have been determined in accordance with the Fluid
Controls Institute report FCI 58-2. Recommended Voluntary Standards for Measurement
Procedure for Determining Control Valve Flow Capacity, including procedure, design of the
test stand and evaluation of the data.

15
Connections
P-AE Medium Pressure SFCX
Dimensions
Tube inches (mm) 60
O.D. Connection Type
in. (mm) B
A B C D F H Thread
A
Drill
1/4 SF250CX20 25/64 7/16 -20 .28 .50 .19 .109 F
(6.35) (7.11) (12.7) (4.83) (2.77)
C
3/8 SF375CX20 33/64 9/16 -18 .38 .62 .31 .203 D
(9.53) (9.65) (15.7) (7.87) (5.16)
9/16 SF562CX20 3/4 13/16 -16 .44 .75 .50 .359 5
(14.3) (11.2) (19.1) (12.7) (9.12)
Weep
3/4 SF750CX20 61/64 3/4 -14z .50 .94 .62 .516 hole
(19.1) (12.7) (23.9) (15.7) (13.1) H

1 SF1000CX20 1-19/64 1-3/8 -12 .81 1.31 .88 .688

(25.4) (20.6) (33.3) (22.4) (17.5) Z = NPS Male Tap

P-AE High Pressure FC

Dimensions
Tube inches (mm)
O.D. Connection Type
60
in. (mm)
A B C D F H B
Thread
A
1/4 F250C 33/64 9/16 -18 .38 .44 .17 .094 Drill
(6.35) (9.65) (11.2) (4.32) (2.39) F
3/8 F375C 11/16 3/4 -16 .53 .62 .26 .125 5 C D
(9.53) (13.5) (15.7) (6.60) (3.18)
9/16 F562C 1-3/64 1-1/8 -12 .62 .75 .38 .188
(14.3) (15.7) (19.1) (9.65) (4.78)
9/16 F562C40 1-3/64 1-1/8 -12 .62 .75 .38 .250 Weep
(14.3) (15.7) (19.1) (9.65) (6.35) hole
H
1 F1000C43 1-19/64 1-3/8 -12 .81 1.31 .88 .438
(25.4) (20.6) (33.3) (22.4) (11.1)

Note: All dimensions are shown for reference only and should not be considered as actual machining dimensions.
*For port Diameter please see orifice sizes for specific valves and fittings.
All threads are manufactured to a class 2A or 2B fit.

Offer of Sale
The items described in this document are available for sale by Parker Hannifin Corporation, its subsidiaries or its authorized distributors. Any sale contract entered by Parker will be governed by the provisions
stated in Parker's standard terms and conditions of sale (copy available upon request).

2013 Parker Hannifin Corporation | Autoclave Engineers is a registered trademark of the Parker Hannifin Corporation 02-0015BE January2013

Instrumentation Products Division Parker Hannifin Manufacturing Ltd.

raccords, vannes et Set System. Ce systme pour tube de 1/4 1/3,

pour dbit important permet de travailler jusqu 1034

tubes haute pression bars (15,000 psi) dans toutes les tailles. Pour plus
dinformations, demander un catalogue VFT complet ou
contacter le reprsentant Autoclave Engineers.
Depuis sa cration en 1945, Autoclave Engineers sest consacr
la fabrication de robinetterie haute pression totalement fiable,
pour un fonctionnement en toute scurit, malgr des variations
extrmes de temprature et de pression et dans des conditions
environnementales parfois difficiles. Aujourdhui, Autoclave
Engineers est le leader mondial de la fourniture des vannes,
raccords et tubes haute pression, et du service aux industries
utilisant les hautes pressions.
Alors que les vannes, raccords et tubes Autoclave sont
largement rputs pour leur aptitude travailler jusqu des
pressions pouvant excder 6895 bars (100000 psi), il existe
aussi une ligne de produits basse pression pour les applications
allant jusqu 750 bar (11500 psi). Utilisant une simple bague
sertie, qui permet une mise en oeuvre rapide et parfaitement
tanche; ce raccordement est disponible de 1/16 1/2.
Vannes, raccords et tubes basse pression
Toutes les vannes basse pression Autoclave sont des vannes de
type bloc/pointeau. La conception du pointeau dit non tournant
vite le grippage et dventuelles rayures.
De plus le contact mtal/mtal entre sige et pointeau garantit
une tanchit aux bulles, ainsi quune longvit accrue en cycle
marche/arrt du pointeau et de son sige mme dans un flux
abrasif et une excellente rsistance la corrosion de lensemble.
Trois styles de vannes basse pression sont disponibles: les
sries 10V, SW et MVE/MV.
Types de circuits proposs :
2-Voies droites
2-Voies dangle
3-Voies/ 2 sous pression
3-Voies/ 1 sous pression
2-Voies dangle sige remplaable (non disponible en MVE/MV)
3-Voies/ 2 pointeaux
Trois types de pointeaux sont disponibles. Un pointeau en V est
propos quand lapplication demande une simple ouverture/
fermeture, tanchit mtal/mtal, avec possibilit douverture
rapide. Si lapplication ncessite un meilleur contrle du dbit,
AE propose un pointeau de rgulation non tournant en 2 parties.
Pour les rgulations de dbit les plus prcises, Autoclave
recommande un pointeau de rgulation micromtrique.
Une gamme complte de tubes et raccords, ainsi que des
produits spciaux sont disponibles, afin de pouvoir fournir tous
les composants ncessaires pour notre ligne basse pression.
Les composants Autoclave sont proposs de faon standard en
Inox 316, mais peuvent tre commands en option en diffrents
matriaux tels que: Hastelloy B et C, Inconel, Monel, Nickel ou
Titane.
Pour plus dinformation ou pour commander un catalogue VFT
complet, contactez votre reprsentant Autoclave ou directement
notre site www.autoclaveengineers.com.

2
Vannes fermeture manuelle
Les vannes Autoclave sont conues et fabriques pour fonctionner des pressions allant jusqu 10342 bar
(150,000 psi). Leurs caractristiques spcifiques assurent un fonctionnement sr et fiable sous des contraintes
trs varies.
Pointeau non tournant
Pointeau - peut tre rajust
vite la dtrioration par grippage du pointeau/ pour rduire le jeu latral
Poinges - de
construction solide.
sige, louverture et la fermeture de la vanne. pendant que la vanne
Disponibles en dif-
fonctionne
frentes couleurs
Etancht mtal/mtal crou de presse toupe -
bronze daluminium plaqu
Assure une fermeture tanche aux bulles, une dure nickel, rduit le couple de
de vie pointeau/sige plus longue mme dans un fermeture du pointeau Frein dcrou - vite le desserrage
de lcrou presse toupe
flux abrasif, une longvit accrue en cycle marche/ Bute de pallier -
inox plaqu argent pour
arrt et une excellente rsistance la corrosion. rduire le frottement du
pointeau Orifices pour vis de montage
Presse-toupe PTFE encastr Perage pour montage sur
cornire - standard
sur panneau- standard sur
chaque vanne
Accrot la fiabilit de ltancht entre pointeau sur toutes les vannes
et corps de vanne. Les matriaux du fourreau du Presse toupe en
Corps de vanne tir froid dessous du filtetage
pointeau et de lcrou du presse toupe augmentent - autorise des pressions du pointeau - rglable;
leves pour des dimensions
la dure de vie du filetage et rduisent le couple de corps de vanne rduites
spare les filetages (et
leurs lubrifiants) du fluide
ncessaire pour actionner la vanne. vhicul
Pointeau non tournant

Options des vannes manuelles

- vite le grippage et les
raflures par frottement du
pointeau sur le sige; assure
Permet de proposer des vannes sur mesures la fermeture avec tanchit
pour des usages spcifiques: six types de corps aux bulles.

de vannes diffrents, une varit de matriaux

et de pointeaux, des modles pour tempratures Extrmits de pointeau
extrmes, des options pour fonctionner en milieu disponibles en V ou de
rgulation
abrasif, des montages sur panneau et plusieurs type Raccordement - par cne et filetage avec
de poignes sont galement disponibles en option. une option bague/crou anti vibration

Modle prsent: 20SC9071

ext Pressions *Valeur Type

du tube de service Cv de 2-Voies 2-Voies 3-Voies 3-Voies 2-Voies dangle 3-Voiex
(pouces) psi (bar) (ouverture totale) pointeau droites dangle 2 sous pression 1 sous pression sige remplaable 2 pointeaux
1/4 20,000 .31 Vee 20SC4071 20SC4072 20SC4073 20SC4074 20SC4872 20SC4075
(6.35) (1380) Reg 20SC4081 20SC4082 20SC4083 20SC4084 20SC4882 20SC4085
3/8 20,000 .75 Vee 20SC6071 20SC6072 20SC6073 20SC6074 20SC6872 20SC6075
(9.53) (1380) Reg 20SC6081 20SC6082 20SC6083 20SC6084 20SC6882 20SC6085
Moyenne 9/16 20,000 1.75 Vee 20SC9071 20SC9072 20SC9073 20SC9074 20SC9872 20SC9075
Pression (14.3)
3/4
(1380)
20,000 2.80
Reg
Vee
20SC9081
20SC12071
20SC9082
20SC12072
20SC9083
20SC12073
20SC9084
20SC12074
20SC9882
20SC12872
20SC9085
20SC12075
(19.1) (1380) Reg 20SC12081 20SC12082 20SC12083 20SC12084 20SC12882 20SC12085
1 20,000 5.20 Vee 20SC16071 20SC16072 20SC16073 20SC16074 20SC16872 20SC16075
(25.4) (1380) Reg 20SC16081 20SC16082 20SC16083 20SC16084 20SC16882 20SC16085
1 30,000 2.60 Vee 30SC16071 30SC16072 30SC16073 30SC16074 30SC16872 30SC16075
(25.4) (2070) Reg 30SC16081 30SC16082 30SC16083 30SC16084 30SC16882 30SC16085
1/4 30,000 .12 Vee 30VM4071 30VM4072 30VM4073 30VM4074 30VM4872 30VM4075
(6.35) (2070) Reg 30VM4081 30VM4082 30VM4083 30VM4084 30VM4882 30VM4085
3/8 30,000 .23 Vee 30VM6071 30VM6072 30VM6073 30VM6074 30VM6872 30VM6075
(9.53) (2070) Reg 30VM6081 30VM6082 30VM6083 30VM6084 30VM6882 30VM6085

Haute 9/16
(14.3)
30,000
(2070)
.33 Vee 30VM9071 30VM9072
Reg 30VM9081 30VM9082
30VM9073
30VM9083
30VM9074
30VM9084
30VM9872
30VM9882
30VM9075
30VM9085
Pression 9/16
(14.3)
40,000
(2760)
.28 Vee 40VM9071 40VM9072
Reg 40VM9081 40VM9082
40VM9073
40VM9083
40VM9074
40VM9084
40VM9872
40VM9882
40VM9075
40VM9085
1/4 60,000 .08 Vee 60VM4071 60VM4072 60VM4073 60VM4074 60VM4872 60VM4075
(6.35) (4140) Reg 60VM4081 60VM4082 60VM4083 60VM4084 60VM4882 60VM4085
3/8 60,000 .09 Vee 60VM6071 60VM6072 60VM6073 60VM6074 60VM6872 60VM6075
(9.53) (4140) Reg 60VM6081 60VM6082 60VM6083 60VM6084 60VM6882 60VM6085
9/16 60,000 .14 Vee 60VM9071 60VM9072 60VM9073 60VM9074 60VM9872 60VM9075
(14.3) (4140) Reg 60VM9081 60VM9082 60VM9083 60VM9084 60VM9882 60VM9085
*les CV indiqus le sont pour les modles 2-voies droites. Pour 2-voies dangle, augmenter le CV de 50%.

3
Oprateurs Pneumatiques (pour Vannes Manuelles AE)
Trois tailles doprateurs pneumatiques ( service moyen, fort ou extra fort ) sont proposes pour la commande
douverture-fermeture automatique distance des vannes AE de moyenne et haute pression. Les oprateurs
pneumatiques sont disponibles en deux configurations: ouverture par pression dair (vanne normalement
ferme) ou fermeture par pression dair (vanne normalement ouverte.)

Procdure de commande (consulter lusine pour une slection correcte)

Pour commander une vanne avec un oprateur pneumatique, choisir la classe de service et le type de
configuration daprs le tableau ci-dessous. Ajoutez le suffixe caractrisant loprateur pneumatique la rfrence
catalogue de la vanne AE. Par exemple pour commander une vanne 2-voies droites, 30VM pointeau en V, 9/16
(14.3mm) avec un oprateur pneumatique de type moyen fermeture sous pression dair (normalement ouvert),
prciser la rfrence 30VM9071-C1S pour le modle carcan piston ou bien 30VM9071-CM pour le modle
intgral membrane.

Classe de Type suffixe de la

Oprateur
Service rfrence
Normalement ferm OM
Membrane
Moyen Normalement ouvert CM
Normalement ferm O1S
Piston
Normalement ouvert C1S
Normalement ferm OH
Membrane
Fort Normalement ouvert CH
Normalement ferm O2S
Piston
Normalement ouvert C2S
Extra Fort Normalement ferm HO2S
Piston
Piston Simple Normalement ouvert HC2S
Extra Fort Normalement ferm HO2S
Piston
Piston Double Normalement ouvert HC2S

4
Ce tableau est destin permettre deffectuer la selection rapide dun oprateur pneumatique partir de la taille
et du type de la vanne quiper, de la pression de service maximum du systme et de la pression dair maximum
disponible. Par exemple, si la pression de travail du systme est 1723 bar (25000 psi), la pression dair disponible
est de 4,1 bar (60psi) et une vanne normalement ferme est ncessaire, une vanne 30VM ou 60VM avec un
oprateur pneumatique de classe fort peut tre utilise.
Normalement ouvert
ext. Moyen Fort Extra Fort Piston Simple Extra Fort Piston Double
du tube Pression Pression Pression Pression Pression Pression
Type de pouces Pression Pression
du systme dair du systme dair du systme dair du systme dair
Vanne (mm)
psi (bar) psi (bar) psi (bar) psi (bar) psi (bar) psi (bar) psi (bar) psi (bar)
9/16 8,600 100 10,000 55 10,000 45 10,000 20
(14.3) (593) (6.9) (690) (3.8) (690) (3.10) (690) (1.4)
10SM 3/4
(19.1)
4,800
(331)
100
(6.9)
10,000
(690)
100
(6.9)
10,000
(690)
70
(4.83)
10,000
(690)
35
(2.4)
1 2,800 100 6,300 100 8,500 95 10,000 55
(25.4) (193) (6.9) (4346) (6.9) (586) (6.55) (690) (3.79)
1/4 20,000 95 20,000 50 __ __ __ __
(6.35) (1380) (6.5) (1380) (3.5)
3/8 19,000 100 20,000 55 __ __ __ __
(9.53) (1310) (6.9) (1380) (3.8)
20SM 9/16
(14.3)
10,700
(734)
100
(6.9)
20,000
(1296)
85
(5.9)
20,000
(1380)
65
(4.48)
20,000
(1380)
30
(2.1)
3/4 6,100 95 13,600 100 19,000 100 20,000 50
(19.1) (421) (6.5) (938) (6.9) (1310) (6.90) (1380) (3.4)
1 3,900 100 8,800 100 19,000 95 20,000 75
(25.4) (269) (6.9) (607) (6.9) (1310) (6.55) (1380) (5.1)
1 __ __ __ __ __ __ 30,000 80
30SC (25.4) (2068) (5.5)
1/4 30,000 55 30,000 30 __ __ __ __
(6.35) (2068) (3.8) (2068) (2.0)
3/8 30,000 75 30,000 40 __ __ __ __
30VM (9.53) (2068) (5.2) (2068) (2.8)
9/16 30,000 75 30,000 40 __ __ __ __
(14.3) (2068) (5.2) (2068) (2.8)
9/16 __ __ 40,000 45 __ __ __ __
40VM (14.3) (2758) (3.1)
1/4 60,000 75 60,000 40 __ __ __ __
(6.35) (4137) (5.2) (4137) (2.8)
3/8 60,000 75 60,000 40 __ __ __ __
60VM (9.53) (4137) (5.2) (4137) (2.8)
9/16 60,000 90 60,000 45 __ __ __ __
(14.3) (4137) (6.2) (4137) (3.1)

Normalement ferm
9/16 7,900 95 10,000 75 10,000 60 10,000 40
(14.3) (1380) (6.9) (1380) (5.1) (690) (4.13) (690) (2.8)
10SM 3/4
(9.1)
__ __ __ __ 10,000
(690)
95
(6.55)
10,000
(690)
60
(4.1)
1 __ __ __ __ 6,500 100 10,000 85
(25.4) (448) (6.90) (690) (5.9)
1/4 20,000 95 20,000 50 __ __ __ __
(6.35) (1380) (6.6) (1380) (3.4)
3/8 18,250 95 18,250 50 __ __ __ __
(9.53) (1258) (6.6) (1258) (3.4)
9/16 9,800 95 15,700 75 20,000 85 20,000 55
20SM (14.3) (676) (6.6) (948) (5.1) (1380) (5.86) (1380) (3.8)
3/4 __ __ 6,000 75 15,000 100 20,000 80
(19.1) (414) (5.1) (1034) (6.90) (1380) (5.5)
1 __ __ 4,000 75 10,000 100 20,000 100
(25.4) (276) (5.1) (690) (6.90) (1380) (6.9)
1 __ __ __ __ __ __ 30,000 100
30SC (25.4) (2068) (6.9)
1/4 30,000 75 30,000 40 __ __ __ __
(6.35) (2068) (5.2) (2068) (2.8)
30VM 3/8
(9.53)
30,000
(2068)
95
(6.5)
30,000
(2068)
50
(3.5)
__ __ __ __

9/16 30,000 95 30,000 50

(14.3) (2068) (6.5) (2068) (3.5)
9/16 __ __ 40,000 55 __ __ __ __
40VM (14.3) (2758) (3.8)
1/4 60,000 95 60,000 50 __ __ __ __
(6.35) (4137) (6.5) (4137) (3.5)
3/8 60,000 95 60,000 50 __ __ __ __
60VM (9.53) (4137) (6.5) (4137) (3.5)
9/16 60,000 95 60,000 50 __ __ __ __
(14.3) (4137) (6.5) (4137) (3.5)

5
Raccords Union
Les raccords union prsents ici permettent de raccorder toutes les combinaisons de tube Autoclave de taille
standard par lintermdiaire de raccordements femelle-femelle. Dautre raccords sont disponibles sur commande
spciale.
Connexion Connexion B
A AE Moyenne Pression AE Haute Pression
Comment utiliser le 1/4 3/8 9/16 3/4 1 1 1/4 3/8 9/16 9/16
tableau: ext.
du tube
Type
de
Pression
psi* (6.35) (9.53) (14.3) (19.1) (25.4)
SF250CX SF375CX SF562CX SF750CX SF1000CX
(25.4)
F1000
(6.35)
F250C
(9.53)
F375C
(14.3)
F562C
(14.3)
F562C40
pouces connexion (bar)
(mm) CX43
1. Localiser la connexion A dans la
colonne verticale. 1/4 SF250CX 20,000 20FX 20F 20F 20F 20F 20F 20F 20F 20F

AE Moyenne Pression
(6.35) (1380) 4466 4666 4966 41266 41666 41666 4463 4663 4963
2. Localiser la connexion B sur la
partie haute du tableau. 3/8 SF375CX 20,000 20FX 20F 20F 20F 20F 20F 20F 20F
(9.53) (1380) 6666 6966 61266 61666 61666 6463 6663 6963
3. La rfrence du raccord
9/16 SF562CX 20,000 20FX 20F 20F 20F 20F 20F
ncessaire est situe (14.3) (1380) 9966 91266 91666 9463 9663 9963
lintersection des 2 colonnes.
3/4 SF750CX 20,000 20FX 20F 20F 20F 20F
(19.1) (1380) 12 121666 12463 12663 12963

1 SF1000CX 20,000 20FX 20F 20F 20F

(25.4) (1380) 16 16463 16663 16963

1 F1000C43 43,000 43FX

(25.4) (2964) 16
AE Haute Pression

1/4 F250C 60,000 43F 60F 60F 60F

connexion connexion (6.35) (4140) 41633 4433 4633 4933

femelle femelle 3/8 F375C 60,000 43F 60F 60F

A B (9.53) (4140) 61633 6633 6933

9/16 F562C 40,000 43F 60F

(14.3) (2758) 91633 9933

9/16 F562C40 40,000 40F

(14.3) (2758) 9933

Adaptateurs Mle/Femelle
Les adaptateurs Mle/Femelle sont conus pour raccorder directement une connexion femelle une autre taille
ou un autre type de connexion.
En choisissant un adaptateur comportant des connexions de tailles diffrentes, la connexion de plus gros diamtre devrait tre
sur lextrmit mle o la rsistance mcanique de ladaptateur peut tre la plus forte.

Pour utiliser le tableau: Extrmit Femelle

AE Moyenne Pression AE Haute Pression

1/4(6.35) 3/8(9.53) 9/16(14.3) 3/4(19.1) 1(25.4) 1(25.4) 1/4(6.35) 3/8(9.53) 9/16(14.3) 9/16 (14.3)
1. Localiser lextremit MLE dans la SF250CX SF375CX SF562CX SF750CX SF1000CX F1000C43 F250C F375C F562C F562C40
colonne verticale. Extrmit pour conn. Pression 20,000 20,000 20,000 20,000 20,000 43,000 60,000 60,000 60,000 40,000
femelle
2. Localiser lextremit FEMELLE Mle
corresp. psi*(bar) (1380) (1380) (1380) (1380) (1380) (2964) (4140) (4140) (4140) (2758)
dsire pour ladaptateur sur la
1/4 SF250CX 20,000 20M46K6 20M49K6 20M412K6 20M416K6 20M44K3 20M46K3 20M49K3
partie haute du tableau. (6.35) (1380)
AE Moyenne Pression

3. La rfrence catalogue de 3/8 SF375CX 20,000 20M64K6 20M69K6 20M612K6 20M616K6 20M64K3 20M66K3 20M69K3
l adaptateur ncessaire est situe (9.53) (1380)

lintersection des 2 colonnes. 9/16 SF562CX 20,000 20M94K6 20M96K6 20M912K6 20M916K6 20M94K3 20M96K3 20M99K3
(14.3) (1380)
Autres adaptateurs 3/4 SF750CX 20,000 20M124K6 20M126K6 20M129K6 20M1216K6 20M124K3 20M126K3 20M129K3 20M129K40
AE fournit plusieurs autres types (19.1) (1380)

dadaptateurs sur commande spciale. 1 SF1000CX 20,000 20M164K6 20M166K6 20M169K6 20M1612K6 20M1616K6 20M164K3 20M166K3 20M169K3
(25.4) (1380)
Cel inclut aussi les connexions du type
AE UniVersa-Lok, douille souder sur 1 F1000C43 43,000 43M164B3 43M166B3 43M169B3 43M168B40
(25.4) (2964)
le ext du tube ou taille nominale du
AE Haute Pression

1/4 F250C 60,000 20M44B6 20M46B6 20M49B6 20M412B6 43M416B6 60M46B3 60M49B3
tube, connexion mle ou femelle (6.35) (4140)
AN et autres. 3/8 F375C 60,000 20M64B6 20M66B6 20M69B6 20M612B6 20M616B6 43M616B6 60M64B3 60M69B3
(9.53) (4140)
Matires 9/16 F562C 60,000 20M94B6 20M96B6 20M99B6 20M912B6 20M916B6 43M916B6 60M94B3 60M96B3
Tous les adaptateurs AE sont usins (14.3) (4140)
avec prcision partir dInox 316 tir 9/16 F562C40 40,000 20M912G6
(14.3) (2758)
froid. Autres matires disponible sur
commande spciale.
*Pression- les valeurs de pression des raccords AE sont bases la valeur de la connexion la plus faible.
6
Raccords, Composants & Accessoires

Connexion Pression Type de connexion

Pouce (mm) psi (bar)
Type cne et filetage pour contrainte lve et
Moyenne 1/4 to 1 to 20,000
assemblage rpt .
Bague crou anti vibration disponible.
Pression (6.35 to 25.4) (1380)
Bague et crou en ligne pour rduire lpaisseur
du bloc.

Type cne et filetage pour contrainte lve et

1 to 43,000
(25.4) (2964)
assemblage rpt .
Bague crou anti vibration disponible.
Haute
Pression Type cne et filetage pour contrainte lve et
assemblage rpt .
1/4 to 9/16 to 60,000
(6.35 to 14.3) (4140) Bague crou anti vibration disponible.
Bague paule loge dans lcrou pour
diminuer la largeur du bloc .

ext. Valeurs de
Tube Pression Raccord Raccord Traverse
pouces (mm) psi (bar) Coude T Croix union union droit de cloison
1/4 (6.35) 20,000 (1380) CLX4400 CTX4440 CXX4444 20FX4466 20UFX4466 20BFX4466

Moyenne 3/8
9/16
(9.53)
(14.3)
20,000 (1380)
20,000 (1380)
CLX6600
CLX9900
CTX6660
CTX9990
CXX6666
CXX9999
20FX6666
20FX9966
20UFX6666
20UFX9966
20BFX6666
20BFX9966
Pression 3/4 (19.1) 20,000 (1380) CLX12 CTX12 CXX12 20FX12 20UFX12 20BFX12
1 (25.4) 20,000 (1380) CLX16 CTX16 CXX16 20FX16 20UFX16 20BFX16
1 (25.4) 43,000 (2964) 43CLX16 43CTX16 43CXX16 43FX16 43UFX16 43BFX16

Haute 9/16
1/4
(14.3)
(6.35)
40,000 (2760)
60,000 (4140)
40CL9900
CL4400
40CT9990
CT4440
40CX9999
CX4444
40F9933
60F4433
40UF9933
60UF4433
40BF9933
60BF4433
Pression 3/8 (9.53) 60,000 (4140) CL6600 CT6660 CX6666 60F6633 60UF6633 60BF6633
9/16 (14.3) 60,000 (4140) CL9900 CT9990 CX9999 60F9933 60UF9933 60BF9933

Composants de Clapet Filtres en Supports

disque de
raccordement de retenue ligne rupture

ext. Valeurs de
Tube Pression limiteur de Support disque
pouces (mm) psi (bar) crou Bague filete Bouchon Joint torique Bille dbit Double disque Cartouche de rupture

1/4 (6.35) 20,000 (1380) CGLX40 CCLX40 CPX40 CXO4400 CXB4400 CXK4402 - CXF4 CSX4600*

Moyenne 3/8
9/16
(9.53)
(14.3)
20,000 (1380)
20,000 (1380)
CGLX60
CGLX90
CCLX60
CCLX90
CPX60
CPX90
CXO6600
CXO9900
CXB6602
CXB9900
CXK6602
CXK9902
-
CLFX9900
CXF6
CXF9
CSX6600*
CSX9600*
Pression 3/4 (19.1) 20,000 (1380) CGLX120 CCLX120 CPX120 CXO12 CXB12 CXK1202 - - -
1 (25.4) 20,000 (1380) CGLX160 CCLX160 CPX160 CXO16 CXB16 CXK1602 - - -
1 (25.4) 43,000 (2964) CGLX160 CCLX160 43CPX160 43CXO16 43CXB16 - - - -

Haute 9/16
1/4
(14.3)
(6.35)
40,000 (2760)
60,000 (4140)
AGL90
AGL40
ACL90
ACL40
AP90
AP40
-
CXO4400
-
CB4401
-
CK4402
-
CLF4400
-
CF4
-
CS4600*
Pression 3/8 (9.53) 60,000 (4140) AGL60 ACL60 AP60 CXO6600 CB6601 CK6602 CLF6600 CF6 CS6600*
9/16 (14.3) 60,000 (4140) AGL90 ACL90 AP90 CXO9900 CB9901 CK9902 CLF9900 CF9 CS9600*

*Indiquer la taille du disque de rupture

7
Tube
Autoclave Engineers propose une gamme complte de tubes en acier inox. austnitique
tir froid conu pour rpondre aux xigences des normes des vannes et raccords AE.
Le tube AE est fabriqu spcifiquement pour les applications haute pression ncessitant
la fois rsistance aux contraintes mcaniques et la corrosion. Le tube est fourni dans des
longueurs comprises entre 6,1m et 8,2m (20 et 27 pieds).

Contrles et essais
Le tube AE est contrl pour sassurer quil est exempt de soudure, dfauts, fissures et
autres imperfections, galement quil ne prsente pas de carburation ou de prcipatation
de carbone intergranulaire. Les diamtres intrieurs et extrieurs du tube sont soumis un
contrle spcifique et les dimensions comprises dans des tolrances serres pour garantir
un raccordement correct. Des chantillons de chaque lot sont tests pour confirmer les
caractristiques mcaniques. Des tests hydrostatiques sont galements mis en oeuvre sur une
base statistique et sont effectus la pression de travail du tube. Autoclave peut, sur demande,
effectuer les tests hydrostatiques sur 100% du lot.

Type de Taille du tube pouces(mm)

paisseur Section Pressions de travail psi (bar)
Matire raccordement ext. int. nomminale de flux -325 to 100F 200F 400F 600F 800F
Rfrence du tube associ pouce (mm) pouce (mm) pouce (mm) pouce2 (mm2) (-198 to 38C) (93C) (204C) (316C) (427C)
20,000 20,000 19,250 18,050 16,800
MS15-092 316SS (1380) (1380) (1330) (1250) (1160)
1/4 .109 .070 .009
SF250CX (6.35) (2.77) (1.78) (5.81) 20,000 18,950 17,200 17,000 16,150
MS15-192 304SS (1380) (1310) (1190) (1170) (1110)
20,000 20,000 19,250 18,050 16,800
MS15-093 316SS (1380) (1380) (1330) (1250) (1160)
3/8 .203 .086 .032
SF375CX (9.53) (5.16) (2.18) (20.6) 20,000 20,000 19,250 18,050 16,800
MS15-193 304SS (1380) (1380) (1330) (1250) (1160)

MS15-085 316SS 20,000 20,000 19,250 18,050 16,800

9/16 .312 .125 .076 (1380) (1380) (1330) (1250) (1160)
SF562CX (14.3) (7.92) (3.17) (49)
MS15-187 304SS 20,000 20,000 19,250 18,050 16,800
(1380) (1380) (1327) (1250) (1160)
MS15-097 316SS 15,000 15,000 14,400 13,650 12,670
9/16 .359 .101 .101 (1034) (1034) (992) (941) (874)
SF562CX (14.3) (9.12) (2.56) (65.2)
MS15-194 304SS 15,000 14,170 12,900 12,750 12,670
(1034) (977) (890) (880) (874)
.438 .156 .151 20,000 20,000 19,250 18,050 16,800
MS15-095 316SS (11.1) (3.96) (97.4)
3/4 (1380) (1380) (1330) (1250) (1160)
SF750CX
(19.1) .516 .117 .209 15,000 15,000 14,400 13,650 12,670
MS15-098 316SS (13.1) (2.97) (135) (1034) (1034) (993) (941) (874)
MS15-096 316SS .562 .219 .248 20,000 20,000 19,250 18,050 12,670
1 (14.3) (5.56) (160) (1380) (1380) (1330) (1250) (874)
SF1000CX
(25.4) .688 .156 .371 15,000 15,000 14,400 13,650 12,670
MS15-099 316SS (17.5) (4.02) (239) (1034) (1034) (992) (941) (874)

MS15-081 316SS 60,000 60,000 57,750 54,250 50,700

1/4 .083 .083 .005 (4140) (1380) (1380) (1380) (1380)
F250C
(6.35) (2.11) (2.11) (3.22) 60,000 56,800 51,650 50,700 48,450
MS15-182 304SS (4140) (3910) (3560) (3500) (3340)
MS15-087 316SS 60,000 60,000 57,750 54,250 50,700
3/8 .125 .125 .012 (4140) (4140) (3980) (3740) (3490)
F375C
(9.53) (3.18) (3.18) (7.74) 60,000 56,800 51,650 50,700 48,450
MS15-183 304SS
(4140) (3910) (3560) (3500) (3340)
MS15-083 316SS 60,000 60,000 57,750 54,250 50,700
9/16 .187 .187 .028 (4140) (4140) (3980) (3740) (3490)
F562C
MS15-185 304SS (14.3) (4.78) (4.78) (18) 60,000 56,800 51,650 50,700 48,450
(4140) (3910) (3560) (3500) (3340)
1 .438 .281 .151 43,000 40,600 36,900 36,300 34,700
MS15-199 304SS F1000C43 (25.4) (11.1) (7.14) (97.4) (2964) (2799) (2544) (2502) (2392)
1 .438 .281 .151 43,000 43,000 43,000 41,380 36,330
MS15-211 316SS F1000C43 (25.4) (11.13) (7.14) (97.4) (2964) (2964) (2964) (2853) (2504)
MS15-090 316SS F562C40 9/16 .25 .156 .048 40,000 40,000 38,500 36,100 33,800
(14.3) (6.35) (4.02) (31) (2760) (2760) (2655) (2489) (2330)
Note: pour du tube autofrett, ajouter le suffixe ESR42 au numro de rfrence du tube.
8
Manchettes usines
Pour un faciliter assemblage rapide, AE fournit des
manchettes pr usines (cne et filetage) coupes
diffrentes longueurs pour les vannes et raccords AE.
Longueurs spciales
En complment des longueurs standards listes dans
le tableau ci-dessous, les manchettes peuvent tre
fournies en toute autre longueur spcifique.
Consulter lusine.
Matires
Hormis mention spciale, les rfrences indiques dans le tableau
se rapportent linox 316.

Taille du tube pouce(mm) Rfrences

Type de Pression
connexion 38C (100F) 2.75 3 4 6 8 10 12
associ ext. int. psi(bar) Longueur Longueur Longueur Longueur Longueur Longueur Longueur
SF250CX 1/4 (6.35) .109 (2.77) 20,000 (1380) CNX4402 CNX4403 CNX4404 CNX4406 CNX4408 CNX44010 CNX44012
SF375CX 3/8 (9.53) .203 (5.16) 20,000 (1380) CNX6603 CNX6604 CNX6606 CNX6608 CNX66010 CNX66012
SF562CX 9/16 (14.3) .312 (7.92) 20,000 (1380) CNX9904 CNX9906 CNX9908 CNX99010 CNX99012
SF562CX 9/16 (14.3) .359 (9.12) 15,000 (1034) CNLX9904 CNLX9906 CNLX9908 CNLX99010 CNLX99012
SF750CX 3/4 (19.1) .438 (11.1) 20,000 (1380) CNX1206 CNX1208 CNX12010 CNX12012
SF750CX 3/4 (19.1) .515 (13.1) 15,000 (1034) CNLX1206 CNLX1208 CNLX12010 CNLX12012
SF1000CX 1 (25.4) .562 (14.3) 20,000 (1380) CNX1606 CNX1608 CNX16010 CNX16012
SF1000CX 1 (25.4) .688 (17.5) 15,000 (1034) CNLX1606 CNLX1608 CNLX16010 CNLX16012
F250C 1/4 (6.35) .083 (2.11) 60,000 (4140) CN4402 CN4403 CN4404 CN4406 CN4408 CN44010 CN44012
F375C 3/8 (9.53) .125 (3.18) 60,000 (4140) CN6603 CN6604 CN6606 CN6608 CN66010 CN66012
F562C 9/16 (14.3) .187 (4.78) 60,000 (4140) CN9904 CN9906 CN9908 CN99010 CN99012
F562C40 9/16 (14.3) .250 (6.35) 40,000 (2760) 40CN9904-316 40CN9906-316 40CN99086-316 40CN99010-316 40CN99012-316
F1000C43 1 (25.4) .438 (11.1) 43,000 (2964) 43CN1606-304 43CN1608-304 43CN16010-304 43CN16010-304

Note: Ajouter -316 ou -314 la rfrence pour prciser la matire si elle nest pas indique.

Ensembles bague/crou anti-vibrations

Des chocs et des vibrations peuvent se produire dans le systme et sur le tube, particulirement si la vanne ou le
raccord sont placs sur une ligne non soutenue proximit dun compresseur. Pour cette raison, les connexions
par cne et filetage Autoclave Engineers sont proposes avec un ensemble bague et crou anti-vibrations AE.
Compltement interchangeables avec les connexions haute pression standards AE, les ensembles bague/crou
anti-vibrations offrent la mme efficacit de tenue la pression.

crou
Rfrences crou
ext Bague fendue
Tube Moyenne Haute Zone de main- Bague fendue
pouces Pression Pression tien du tube
Corps de bague
(mm) (jusqu 1400 bars) (jusqu 4200 bars) par la bague Corps de
pour support vanne ou
Corps de
anti-vibration de raccord
vanne ou
1/4 (6.35) KCBGLX40-316MC KCGL40-316 de raccord
Zone de main-
tien du tube
3/8 (9.53) KCBGLX60-316MC KCGL60-316 Bague par la bague
filete* pour support
anti-vibration
9/16 (14.3) KCBGLX90-316MC KCGL90-316 Ligne de
contact Ligne de
dtanchit Bague
contact
filete*
3/4 (19.1) KCBGLX120-316MC - dtanchit

Sries KCBGLX Series KCGL

1 (25.4) KCBGLX160-316MC KCBGLX160-316MC Pressions jusqu 1380 bar Pressions jusqu 1440 bar

1 High Pressure to 43,000 psi (2964 bar) *Bague filete AE non inclus dans lensemble complet

9
Manomtres de qualit AE pour instrumentation

Matires et caractristiques
Prcision de 0,5% de la gamme de mesure.
Cadran plastique robuste - boitier robuste en alliage daluminium.
Panneau arrire clatable pour libration de pression en cas de dfaillance du tube de Bourdon.
Tube de Bourdon** en Acier Inox 316.
Mouvement de prcision en Acier Inox pour la prcision et la rsistance la corrosion atmosphrique.
Rglage de point zro situ sur la face du manomtre derrire le couvercle du cadran pour commodit
dutilisation

Des manomtres de qualit pour instrumentation.

Montage affleurant sur panneau Des bagues interchangeables de maintien des cadrans sont rservs.
pour permettre un montage sur panneau. Ils sont fournis sans cot supplmentaire sils sont spcifis la
commande ajouter PM la rfrence de commande.
En option: des faces avec contact lectrique Disponibles pour tous les manomtres pour
instrumentation. Grce des contacts lectriques rglables haut et bas, cette option permet aux
manomtres de fournir un contrle de pression pour un travail automatique ou tlcommand ou pour
positionner des points de scurit de dfaillance.
** La matire des tubes de Bourdon pour les manomtres de 0 5500 bar (P-0490-CG) est lInconel 718 #1 tremp recuit
La matire des tube de Bourdon pour les manomtres de 0 30000 psi (0 2068 bars est le Monel K)

1/4" (F250C)
Note: Les manomtres peuvent Connection type filetage et cne
tre fournis avec des connexions Livr avec bague filete et crou
arrire; Ajouter la lettre B la
rfrence. Exemple: P-047B-CG. Etalonn en psi uniquement
Valeur
Rfrences Gamme mini. Diamtre
Catalogue de pression dintervalle du cadran
(psi) (psi) (pouces)

P-0499-CG 0-1000 10 4-1/2

P-0479-CG 0-1500 10 4-1/2
P-0480-CG 0-3000 20 4-1/2
P-0481-CG 0-5000 50 4-1/2
P-0482-CG 0-10,000 100 4-1/2
P-0483-CG 0-15,000 100 4-1/2
P-0487-CG 0-20,000 200 4-1/2
P-0488-CG 0-30,000 200 6
P-0489-CG 0-50,000 500 6
P-0490-CG** 0-80,000 1,000 6

Option face contacts lectriques

Diamtre de logement du
Rfrences cadran (pouces)
P-0713 4-1/2
P-0714 6

10
Produits spcialiss
Vannes boisseau sphrique
Les vannes boisseau sphrique AE sont conues pour
des applications de type ouvert-ferm haut dbit. Lorsque
la vanne est totalement ouverte la conception plein passage
minimise la perte de charge.
Les vannes boisseau sphrique AE sont
conomiques et faciles entretenir pour une
utilisation durable. Conue dune seule pice,
la tige-boisseau limine le risque de cisaillement
et diminue les effets de charge latrale qui se
produisent avec les pices conues en deux parties.
Les crous de sige peuvent tre resserrs pour
prolonger lutilisation. Le couple de fonctionnement
est faible pour diminiuer lusure et tendre la dure
de vie des pices. La vanne boisseau sphrique AE
est conue pour travailler des pressions allant jusqu
1380 bar 93C (20000 psi 200F) et des tempratures
jusqu 260C 345 bar (500F 5000 psi). Les vannes
boisseau sphrique AE sont disponibles en 2 voies et 3 voies
avec orifices de taille 4.7mm 12.7mm. Parmi les caractristiques:
construction en acier
Inox 316, siges PEEK, tige-boisseau en une seule pice et tancheit
faible friction.

Sries RVP & RVS

Les clapets de dcharge, sries RVP & RVS, permettent une vacuation fiable des gaz ou
des liquides pour des pressions talonnes de 103 bar (1500 psi) 4140 bar (60 000 psi). La
gamme de tempratures standard sur les modles RVP est de 253C 204C (-423F 400F).
Une option haute temprature jusqu 750F (400C) est galement disponible. La gamme de
tempratures sur les modles RVS est de 0C 204C (32F 400F). (Nota: la matire du sige
est Arlon).
Ces clapets de prcision sont conus pour les systmes pression de gaz, les systmes
cryogniques, les applications ptro-chimiques et autres applications spciales. Ils peuvent tre
utiliss sur de lair, des gaz, de la vapeur, liquides et vapeur. Ils ne sont pas recommands pour
applications sur chaudires vapeur et ne peuvent pas tre estampills du code ASME.
Les clapets de dcharge sont conus pour souvrir proportionnellement la pression de retour
et par consquent, ne sont pas recommands pour des applications rclamant une ouverture
immdiate plein passage la pression dtalonage (telles que dcompositions, polymrisation,
etc ...). Louverture totale du clapet est dfinie 10% au dessus de la pression dtalonage.

Type & taille

de connexion Valeurs de pressions
(pouces) PSIG @ 100F (bar 38C)

Rfrences Entre Sortie orifice talonage talonage Pression maxi

FNPT pouces (mm) Min. Max. de retour
5RVP9072 SF562CX 3/4 (19.1) .312 (7.92) 3,000 (207) 5,000 (345) 500 (34.5)
10RVP9072 SF562CX 3/4 (19.1) .250 (6.35) 5,000 (345) 10,000 (690) 500 (34.5)
15RVP9072 SF562CX 3/4 (19.1) .188 (4.78) 10,000 (689) 15,000 (1034) 500 (34.5)
20RVP9072 SF562CX 3/4 (19.1) .156 (4.02) 15,000 (1034) 20,000 (1379) 500 (34.5)
30RVP6072 F375C 3/4 (19.1) .125 (3.18) 20,000 (1379) 30,000 (2068) 500 (34.5)
45RVP9072 F562C 3/4 (19.1) .093 (2.36) 25,000 (1724) 45,000 (3103) 500 (34.5)
60RVP6072 F375C 3/4 (19.1) .078 (1.98) 30,000 (2060) 60,000 (4137) 500 (34.5)
Sige souple
5RVS9072 SF562CX 3/4 (19.1) .312 (7.92) 1,500 (103) 5,000 (345) 500 (34.5)
10RVS9072 SF562CX 3/4 (19.1) .250 (6.35) 5,000 (345) 10,000 (690) 500 (34.5)
20RVS9072 SF562CX 3/4 (19.1) .156 (4.02) 10,000 (690) 20,000 (1379) 500 (34.5)

11
Produits spcialiss
Blocs multi-voies collecteurs/distributeurs
Les blocs collecteurs/distributeurs permettent de rduire au minimum lespace et le temps ncessaires la
connexion dun circuit sous pression. Par ailleurs en rduisant le nombre des composants utiliss dans le sytme,
les blocs multi-voies limitent le nombre de points de fuite potentiels.

Autoclave Engineers peut concevoir et fabriquer des blocs multi-voies pour rpondre des besoins spcifiques
de disposition et de pression pour des installations spciales. Ces blocs multi-voies sont capables de tenir des
pressions allant du vide jusqu 4137 bar (60 000 psi),et sont disponibles en divers matriaux et tailles. Parmi
les types de raccordement pouvant tre intgrs, on retouve les types basses pressions, moyennes pressions
et hautes pressions Autoclave, ainsi que NPT, SAE, BSP, et autres. Les changements de taille de circuits du
systme et les montages en serie de tubes sous pressions peuvent tre effectus par un bloc multi-voies
spcialis. Ces blocs multi-voies peuvent tre utiliss en tout point dun circuit sous pression.

12
Outils
Clef dynamomtrique rglage micromtrique AE (P-1680)
P-1680 20 to 150 ft. lbs. (27 to 203 Nm)
91020 75 to 250 ft. lbs. (102 to 339 Nm)
Un serrage prcis des presse-toupe et des crous de connexion est essentiel. La cl peut tre ajuste dans
les plages indiques et est utilise avec les adapteurs interchangeables pour des six-pans de 1/2" 1-7/8".
Les rfrences des adapteurs se trouvent sur le tableau ci-dessous.

Taille du six pans

crou presse-toupe 1/2 9/16 5/8 3/4 13/16 7/8 15/16 1 1-1/16 1-3/16 1-3/8 1-1/2 1-7/8
ou crou de tube
pouces (mm) (12.7) (14.3) (15.9) (19.05) (20.6) (22.2) (23.8) (25.4) (27) (30.2) (34.9) (38.1) (47.6)

Rfrence
adapteur P-1681 P-1682 P-1683 P-9813 P-1685 P-1686 P-1687 P-9901 P-1688 P-1689 P-1690 P-6040 P-10076
de la clef

Cintreuse hydraulique de tubes

Pour le pliage en une passe du tube haute pression.
La cintreuse hydraulique AE est conue pour cintrer
rapidement du tube parois paisses, de manire
prcise et fliable en un seul rglage.
La cintreuse de tube est livre complte avec
pompe, vrin, cadre et fer cintrer dans une malette
portable et fermant clef. (rfrence : HTB )

Pompe hydraulique actione pneumatiquement

disponible en option la place de la pompe main.
(rfrence: HTB-A)

Machine usiner cnes et filetages

Procdure pour commander: Model #AEGCTM-2
Des ttes diffrentes dusinage de cnes et filetages sont actionnes par un seul moteur et systme
dentrainement. Le modle AEGCTM-2 est destin lusinage des cnes et filtages de tube AE moyenne
et haute pression.
Dimensions approximatives: 1,4m x 0,7m x 0,5m (H x L x I)
Poids: 159 kg - Les outils doivent tre commands sparment (consulter l'usine).

Caractristiques
Moteur de 1,5 CV , 220 VAC 50 Hz (115 VAC 60 Hz) dmarrage par condensateur.
Inversion inutile durant le filetage; l'ouverture rapide de l'outil prvient l'endommagement
ventuel des filets.
Disponibilit d'un outillage complet; prciser les tailles demandes.
La tte d'usinage de cne est dplace par un volant permettant une opration
facile et prcise.
Pompe huile et rservoir pour l'usinage de cne.
L'unit est monte sur chssis avec roulettes bloquables offrant mobilit et stabilit
de la machine.
En option desponibilit d'un rservoir chauffant
Estampille CE en standard sur les modles 220 VAC 50 Hz.
13
Outils

Outils manuels pour usinage de cne et filetage

AE fabrique un outil manuel permettant dusiner au mieux des cnes sur des tubes de taille allant jusqua (9/16)
de diamtre extrieur. Il sagit dun outil manual de prcision et de qualit permettant la prparation sur site de
lextrmit des tubes AE moyenne et haute pression. Des mandrins interchangeables correspondant chaque
taille de tube assurent le centrage correct du tube. Le dispositif davance de coupe permet loprateur de
contrler la profondeur de passe afin de se prserver des effets dcrouissage. Les lames interchangeables
sont utilises par pair afin de garantir une ralisation plus prcise it plus rapide du cne et elles sont conues
pour quarir et terminer le tube quand le cne est fini. Une rserve est prvue pour lapplication de lubrifiant
sur la zone de coupe.
Le logement de la filire est conu pour recevoir la
filire adapte chaque taille de tube standard AE Outils pour
jusqu 14.3mm (9/16) de diamtre extrieur. Des usinage de cnes
bagues interchangeables guident loutil pour un
usinage prcis du filetage.

Support de lame
Outil fileter
Nota: Des kits complets doutils sont disponibles.
Consulter lusine. crou davance
dusinage
Logement de loutil

Bague crou

Taille du tube Rfrences des outils pour cnes et composants Rfrences des outils fileter et composants

Filire
ext. int. Outil avec Bague de Jeu de Outil Corps Bague de
pouces (mm) pouces (mm) Bague & Lames serrage 2 lames Complet doutil Rfrence Dimension* guidage
AE Moyenne Pression

1/4 (6.35) .109 (2.77) MCTM4 90248 101F-1577 402A 402 P-0214 1/4-28 1010-0343

3/8 (9.53) .203 (5.16) MCTM6 90250 101F-1601 402C 402 P-0215 3/8-24 1010-0344

9/16 (14.3) .312 (7.92) MCTM920 90251 1010-5218 402E 402 P-0216 9/16-18 1010-0345

9/16 (14.3) .359 (9.12) MCTM910 90251 101A-1897 402E 402 P-0216 9/16-18 1010-0345

1/4 (6.35) .083 (2.11) MCTH4 90248 101F-1577 402A 402 P-0214 1/4-28 1010-0343
AE Haute Pression

3/8 (9.53) .125 (3.18) MCTH6 90250 101F-1578 402C 402 P-0215 3/8-24 1010-0344

9/16 (14.3) .188 (4.78) MCTH960 90251 1010-0883 402E 402 P-0216 9/16-18 1010-0345

9/16 (14.3) .250 (6.35) MCTH940 90251 101C-7214 402E 402 P-0216 9/16-18 1010-0345

Huile de coupe: P-8784

Tous les filetage pour tubes moyenne et haute pression sont du type LH national fine ( classe 2).
Nota: les outils manuels pour usinage de cnes et filetage pour les tubes moyenne pression de
ext. 19,1 mm (3/4) et 25,4 mm (1) ne sont pas disponibles. La machine lectrique modle AEGCTM-2 pour usinage de
cnes et tubes est recommande pour ce type de tubes. Une longueur droite minimum de 76 mm (3) est ncessaire afin de
pouvoir raliser des usinages de cne et filetage avec loutil manuel.

14
Calculs de dbits
Le Coefficient de debit (CV) dune vanne est le dbit deau, temprature ambiante, exprim en galon US par
minute circulant au travers de la vanne, compltement ouverte, pour une perte de charge de 1 psi. Le CV est un
coefficient de dimensionnement de la vanne qui permet de choisir la vanne ncessaire pour rpondre aux
contraintes de dbit dun systme fluide donn.
Les valeurs de CV indiques sur les pages de commande de la vanne representent le CV de cette vanne
lorquelle est totalement ouverte. En dterminant la capacit estime, cette valeur de CV devrait tre utilise
dans les fomules suivantes.

Formules de dbit
Liquides
V = CV P1 - P2
q Dbit, gal. U.S./mn. SGF

q Dbit, lb./hr. W = 500 CV (P1 - P2) /SGF

Gaz *=
Q = 42.2 CV (P1 - P2) (P1 + P2)
q Dbit, SCFH SG
=
Q = 963 CV (P1 - P2) (P1 + P2)
q Dbit, SCFH (temprature corrige)
SG TF
=
q Dbit, lb./hr. W = 3.22 CV (P1 - P2) (P1 + P2)/SG
Vapeur sature
=
q Dbit, lb./hr. W = 2.1 CV (P1 - P2) (P1 + P2)

Vapeur super chauffe

=
W = 2.1 CV (P1 - P2) (P1 + P2)
q Dbit, lb./hr.
(1 + 0.0007 TS)

Poids spcifique (SG ) Poids spcifique (SGF ) Nomenclature

des gaz typiques des liquides typiques des formules
V = Dbit, gallons US par minute (GPM)
SG Tamb SGF Tamb
Gaz Relative Gaz Relative Q = Dbit, pieds cube standard par heure (SCFH)
lair leau
W = Dbit, livres/heure
Acetylne 0.897 Actone 0.792 P1 = pression dentre, psia (14.7 + psig)
Air 1.000 Alcool 0.792 P2 = pression de sortie, psia (14.7 + psig)
Ammoniac 0.587 Benzine 0.902
SGF = poids spcifique des liquide (eau = 1.0)
Argon 1.377 Essence 0.751
SG = poids spcifique des gaz (air = 1.0)
Butane 2.070 Gasoline, nat. 0.680
TF = Temprature du fluide.,R absolu (460 + F)
Dioxyde de carbone 1.516 Kerosne 0.815
TS = Super chauffage en F
Ethylne 0.967 Pentane 0.624
CV = coefficient de dbit de la vanne totalement ouverte
Hlium 0.138 Eau 1.000
Hydrogne 0.0695
Mthane 0.553 *Leffet des tempratures du fluide sur les coulement gazeux sont minimum pour les
tempratures entre 0 C et 65C. Une correction devrait re apporte pour des tempratures
Azote 0.966 infrieures ou suprieures.
Oxygne 1.103 = L o la pression de sortie P2 est moins de 1/2 fois la pression lentre P1, le terme:
Propane 1.562 (P1 - P2) (P1 + P2): devient 0.87 P1.
Dioxyde de soufre 2.208 Nota: Les valeurs de Cv maximum indiques dans ce catalogue ont t dtermines en
accord avec le rapport de lInstitut de Controle des Fluide FCI 58-2. Normes volontairement
recommands pour la procdure de mesure pour la determination de la capacit de dbit
des vannes de contrle, incluant procdure,conception du banc de test et valuation des
donnes.

15
Connexions
AE Moyenne Pression SFCX
Dimensions
Tube pouces (mm)
ext. Type de connexion 60
pouces (mm)
A B C D F H B
Filetage
1/4 SF250CX20 25/64 7/16 -20 .28 .50 .19 .109 A
Perage
(6.35) (7.11) (12.7) (4.83) (2.77) F
3/8 SF375CX20 33/64 9/16 -18 .38 .62 .31 .203 C
(9.53) (9.65) (15.7) (7.87) (5.16) D

9/16 SF562CX20 3/4 13/16 -16 .44 .75 .50 .359

5
(14.3) (11.2) (19.1) (12.7) (9.12)
3/4 SF750CX20 61/64 3/4 -14z .50 .94 .62 .516 tmoin
(19.1) (12.7) (23.9) (15.7) (13.1) de fuite
H
1 SF1000CX20 1-19/64 1-3/8 -12 .81 1.31 .88 .688 Z = Taraudage mle NPS
(25.4) (20.6) (33.3) (22.4) (17.5)

AE Haute Pression FC
Dimensions
Tube pouces (mm)
ext. Type de connexion 60
pouces (mm) B
A B C D F H Filetage
A
1/4 F250C 33/64 9/16 -18 .38 .44 .17 .094 Perage
(6.35) (9.65) (11.2) (4.32) (2.39) F

3/8 F375C 11/16 3/4 -16 .53 .62 .26 .125 5 C D

(9.53) (13.5) (15.7) (6.60) (3.18)
9/16 F562C 1-3/64 1-1/8 -12 .62 .75 .38 .188
(14.3) (15.7) (19.1) (9.65) (4.78)
tmoin
9/16 F562C40 1-3/64 1-1/8 -12 .62 .75 .38 .250 de fuite
(14.3) (15.7) (19.1) (9.65) (6.35) H
1 F1000CX43 1-19/64 1-3/8 -12 .81 1.31 .88 .438
(25.4) (20.6) (33.3) (22.4) (11.1)

Nota: Toutes les dimensions ne sont indiques qu titre indicatif et ne doivent pas tre considres comme des
dimensions relles dusinage.
*Pour les dimensions des sorties voir taille des orifices des vannes et raccords spcifiques.
Tous les filetages sont fabriqus une classe 2A ou 2B .

! AVERTISSMENT !
Le prsent document ( ainsi que tout renseignement provenant de Snap-tite Inc. , de ses filiales et distributeurs autoriss ) offrent le choix de produits
et/ou systmes destins permettre des utilisateurs techniquement comptents deffectuer des recherches supplmentaires. Il est important deffectuer
une analyse exhaustive de lapplication et dtudier les renseignements relatifs au produit ou systme dans le catalogue le plus rcent . En raison de la
grande varit de conditions dexploitation et dapplication de ces produits , lutilisateur est, suite ses analyses et essais raliss par ses soins, seul
responsable de son choix de produits et de systmes et de lassurance que toutes les conditions de fonctionnement , de scurit et davertissement ont t
satisfaites .
Les produits dcrits ici , y compris caractristiques, spcifications, dessins, disponibilit, prix, sans aucune limitation, sont succeptibles dtre modifis
par Snap-tite Inc.; et ses filiales tout moment sans avis pralable .

Industrial Estate
Whitemill - Wexford 8325 Hessinger Road
Republic of Ireland Erie, Pennsylvania 16509 USA
Ph: 353 53 914 1566 Fax: 353 53 914 1582 Ph: 814-860-5700 Fax: 814-860-5811
e-mail: ste_sales@snap-tite.com e-mail: ae_sales@snap-tite.com
www.snap-tite.com www.autoclaveengineers.com
08-0056BF-0709
Autoclave Engineers

Weltweit fhrend in
Autoclave Engineers hat ein weitergehendes,
fortschrittliches Druckhlsensystem-genannt

Hochdruckventilen-, QSS-Quick-Set-System-entwickelt.
Dieses 1/4 bis 3/4 Aussendurchmesser

Armaturen- und Rohren dickwandige Hochfluss-Rohrsystem arbeitet in

allen Nennweiten bis 1034 bar (15.000 psi).
Fr weitere Informationen forden Sie bitte unseren
Seit der Grndung im Jahre 1945 hat sich Autoclave Engineers der kompletten VFT Katalog an oder wenden Sie sich
Herstellung von Hchstdruck Ventil-Systemen gewidmet welche sicher an Ihren Autoclave Vertriebspartner.
und zuverlssig bei extremen Schwankungen von Temperatur, Druck
und Umweldbedingungen arbeiten. Heute ist Autoclave weltweit fhrend
auf dem Gebiet der Hochdrucktechnik mit sicher und zuverlssig
arbeitenden Komponenten sowie untersttzendem Service in der
Hochdruckindustrie.
Autoclave Ventile, Armaturen und Rohre sind der Industrie bekannt
fr Einstze bis zu 6895 bar (100.000 psi); eine Niederdruckreihe fr
Applikationen von 1034 bar (15.000 psi) ist ebenfalls verfgbar. Unter
Nutzung spezieller Dichtungsfhrungen sind die Produkte lekagefrei;
Nennweiten von 1/16 bis 1/2.
Niederdruck Ventile, Armaturen und Rohre
Alle Autoclave Niederdruck-Ventile sind mit einer justierbaren
Ventilspindel ausgerstet; eine spielfreie Bedinung ist daher auch nach
lgerem Betrieb gewhrleistet.
Zustzlich sind die Ventile mit einer Metall-auf-Metall Dichtung
ausgerstet fr blasenfreies Abschalten, verschleissfrei und
korrosionsbestndig.
Die folgenden 3 Ausfhrungen der Ventile der Niederdruckreihe werden
angeboten: 10V, SW und MVE/MV Serie.
Modellbeispiele:
2-Wege Durchgangsventil
2-Wege Eckventil
3-Wege 2 Druckeingnge
3-Wege 1 Druckeingang
2-Wege Eckventil mit auswechselbarer Spindel (nicht fr MVE/MV)
3-Wege 2 Spindel Verteiler
Drei unterschiedliche Spindeln sind verfgbar: - Auf/ZU-Spindel:
Spindelkopf in V-frmiger Ausfhrung: Funktion Absperrventil Auf/Zu,
Metall-auf-Metall dichtend.- Regulier-Spindel: Spindelspitze in konischer
Ausfhrung. Funktion: Drosselventil/Absperrventil.- Mikrometer-Spindel:
Feindosierventil mit Mikrometereinteilung, fr kleine reproduzierbare
Durchflussmengen.
Neben einer kompletten Auswahl an Rohren und Armaturen bieten wir
noch weitere Produckte fr andere Temperatur- und Druckbereiche an.
Autoclave Produkte werden standardmssig in Edelstahl 316SS geliefert
aber auch Materialien wie Hastelloy B & C,
Inconel, Monel, Nickel oder Titan sind lieferbar.
Unseren umfangreichen VFT-Katalog erhalten Sie ber unsere
Distributionspartner oder direkt ab Werk unter Telefon (USA):
+1 814-860-5700.

2
Handventile
Autoclave Ventile sind fr das sichere und zuverlssige Arbeiten mit Drcken bis zu 10342 bar (150.000 psi) entwickelt.
Mehrere wichtige Eigenschaften ermglichen das zuverlssige arbeiten unter unterschiedlichen Bedingungen.

Nichtdrehende Ventilspindel Handgriff in betrieb-

sgerechter Ausfhrung,
Verhindert Abrieb an Spindelspitze und Sitz Die Ventilspindel ist justierbar,
dadurch ist auch nach lngerem pulverbeschichtet.
beim ffnen und Schliessen. Betrieb ein spielfreies Bedienen
gewhrleistet.
Lieferbar in verschiedenen
Farben.

Metall-auf-Metall Packung Vernickelte Aluminium-Bronze-

Packungsmutter verringert die
bertragung von Drehkrften auf
Fr blasenfreies Abschalten, garantiert lngere die Ventilspindel.
Eine formschlssige Sicherung
Lebensdauer fr Spindel und Sitz, hhere Die versilberte Lagerscheibe
verhindert ein versehentliches Lsen der
Packungsmutter.
Bestndigkeit fr Auf/Zu-Zyklen sowie setzt auftretende Reibungskrfte
auf ein Minimum herab.
hervorragende Korrosionsbestndigkeit. Jedes Ventil ist serienmsig mit
Jedes Ventil ist serienmssig mit Gewindebohrungen fr die Mon-
tage versehen.

PTFE gekapselte Packung

Durchgangsbohrungen fr die
Montage versehen

Die nachstellbare Packung

Garantiert zuverlssige Spindel-/ Ventilkrper aus kaltbear- verhindert den Austritt von
beitem Edelstahl fr hohe
Ventildichtung. Spindelfhrung und Betriebsdrcke und eine lange
Flssigkeit, gleichzeitig ist
gewhr-leistet, dass kein
Packungsmutter verringern die bertragung Lebensdauer. Gewindeschmiermittel in den
Mediumbereich des Ventils
von Drehkrften auf die Ventilspindel. Die nicht drehende Ventilspindel
eindringt.
verhindert Abrieb und Einker-
bungen and Spindelspitze und

Handventilvarianten Sitz. Dadurch ist das Ventil

gasdicht, auch nach lngerem
Einsatz.
Eine Auswahl von Autoclave Ventilen auf Ihre
Bedrfnisse zugeschnitten, steht zur
Verfgung. Fnf verschiedene Ausfhrung wahlweise mit
Ventilausfhrungen, eine Auswahl von Anschluss fr alle AE Rohran-
Auf/Zu-, Regulier- oder
weichdichtender Spindelspitze.
verschiedenen Materialien und Spindeltypen fr schlussverschraubungen;
antivibrations Packungsmutter optional.
extreme Einsatzbedingungen sowie fr abrasive Abbildung zeigt Modell 20SM9071
Medien stehen zur Verfgung.
Rohraussendurchmesser

Betriebsdruck

*Nennwert Cv

Spindeltyp
Zoll (mm)

psi (bar)

(offen)

2-Wege Eckventil
2-Wege 2-Wege 3-Wegeventil, 3-Wegeventil, austauschbarer 3-Wegeventil
Durchgangsventil Eckventil 2 Druckeingnge 1 Druckeingng Sitz mit 2 Spindel

1/4 20,000 .31 Vee 20SM4071 20SM4072 20SM4073 20SM4074 20SM4872 20SM4075
(6.35) (1380) Reg 20SM4081 20SM4082 20SM4083 20SM4084 20SM4882 20SM4085
3/8 20,000 .75 Vee 20SM6071 20SM6072 20SM6073 20SM6074 20SM6872 20SV6075
(9.53) (1380) Reg 20SM6081 20SM6082 20SM6083 20SM6084 20SM6882 20SM6085
9/16 20,000 1.30 Vee 20SM9071 20SM9072 20SM9073 20SM9074 20SM9872 20SM9075
(14.3) (1380) Reg 20SM9081 20SM9082 20SM9083 20SM9084 20SM9882 20SM9085
3/4 20,000 2.50 Vee 20SM12071 20SM12072 20SM12073 20SM12074 20SM12872 20SM12075

Mitteldruck (19.1)
1
(1380)
20,000 4.40
Reg
Vee
20SM12081 20SM12082 20SM12083 20SM12084
20SM16071 20SM16072 20SM16073 20SM16074
20SM12882
20SM16872
20SM12085
20SM16075
(25.4) (1380) Reg 20SM16081 20SM16082 20SM16083 20SM16084 20SM16882 20SM16085
9/16 10,000 1.75 Vee 10SM9071 10SM9072 10SM9073 10SM9074 10SM9872 10SM9075
(14.30) (690) Reg 10SM9081 10SM9082 10SM9083 10SM9084 10SM9882 10SM9085
3/4 10,000 2.80 Vee 10SM12071 10SM12072 10SM12073 10SM12074 10SM12872 10SM12075
(19.10) (690) Reg 10SM12081 10SM12082 10SM12083 10SM12084 10SM12882 10SM12085
1 10,000 5.20 Vee 10SM16071 10SM16072 10SM16073 10SM16074 10SM16872 10SM16075
(25.40) (690) Reg 10SM16081 10SM16082 10SM16083 10SM16084 10SM16882 10SM16085
1 30,000 2.60 Vee 30SC16071 30SC16072 30SC16073 30SC16074 30SC16872 30SC16075
(25.4) (2070) Reg 30SC16081 30SC16082 30SC16083 30SC16084 30SC16882 30SC16085
1/4 30,000 .12 Vee 30VM4071 30VM4072 30VM4073 30VM4074 30VM4872 30VM4075
(6.35) (2070) Reg 30VM4081 30VM4082 30VM4083 30VM4084 30VM4882 30VM4085
3/8 30,000 .23 Vee 30VM6071 30VM6072 30VM6073 30VM6074 30VM6872 30VM6075
(9.53) (2070) Reg 30VM6081 30VM6082 30VM6083 30VM6084 30VM6882 30VM6085
9/16 30,000 .33 Vee 30VM9071 30VM9072 30VM9073 30VM9074 30VM9872 30VM9075

Hochdruck (14.3)
9/16
(2070)
40,000 .28
Reg
Vee
30VM9081 30VM9082
40VM9071 40VM9072
30VM9083
40VM9073
30VM9084
40VM9074
30VM9882
40VM9872
30VM9085
40VM9075
(14.3) (2760) Reg 40VM9081 40VM9082 40VM9083 40VM9084 40VM9882 40VM9085
1/4 60,000 .08 Vee 60VM4071 60VM4072 60VM4073 60VM4074 60VM4872 60VM4075
(6.35) (4140) Reg 60VM4081 60VM4082 60VM4083 60VM4084 60VM4882 60VM4085
3/8 60,000 .09 Vee 60VM6071 60VM6072 60VM6073 60VM6074 60VM6872 60VM6075
(9.53) (4140) Reg 60VM6081 60VM6082 60VM6083 60VM6084 60VM6882 60VM6085
9/16 60,000 .14 Vee 60VM9071 60VM9072 60VM9073 60VM9074 60VM9872 60VM9075
(14.3) (4140) Reg 60VM9081 60VM9082 60VM9083 60VM9084 60VM9882 60VM9085
*CV Werte gelten fr 2-Wege Durchgangsventile. Fr 2-Wege Eckventile CV plus 50%. Bitten beachten: SM Serie ersetzt 20SC Serie.
3
Pneumatisch bettigte Ventile (fr AE handbettigte Ventile)
Drei Grssen pneumatisch bettigter Ventile (Mittel-, Hoch- und Hchstdruck) stehen zur Auswahl fr fernbettigte Auf-Zu
Bedienung oder automatische Bedienung von Autoclave Mittel- oder Hochdruckventilen. Die pneumatischen AE-Ventile sind
in zwei Schaltvorrichtungen erhltlich: normal offen, mit Druckluft schliessend (air-to-open) und normal geschlossen, mit
Druckluft ffnend (air-to-close).

Bestell-Beispiele (Um eine sichere Auswahl zu treffen, setzen Sie sich bitte mit unserem Werk in Verbindung)
Um ein Ventil mit einer pneumatischen Bedienung zu bestellen, whlen Sie Nennleistung, und Ventiltyp aus der
untenstehenden Tabelle. Fgen Sie Bestellzusatz zur Katalognummer des AE-Ventils hinzu. Beispiele: 2-Wege-
Durchgangsventil, 30VM, Auf/Zu-Spindel, 9/16 (14,3mm), Mitteldruck, mit Druckluft ffnend: 30VM9071-C1S fr ein
Pneumatisch bettiges Joch (Yoke) Ventil mit Kolbenantrieb oder 30VM9071-CM fr ein pneumatisch bettigtes integrales
Ventil mit Membranantrieb.

Nennleistung Antrieb Type Bestellzusatz

Offen, mit Druckluft schliessend OM

Membranantrieb
Geschlossen, mit Druckluft ffnend CM
Mitteldruck
Offen, mit Druckluft schliessend O1S
Kolbenantrieb
Geschlossen, mit Druckluft ffnend C1S
Offen, mit Druckluft schliessend OH
Membranantrieb
Geschlossen, mit Druckluft ffnend CH
Hochdruck
Offen, mit Druckluft schliessend O2S
Kolbenantrieb
Geschlossen, mit Druckluft ffnend C2S
Offen, mit Druckluft schliessend HO1S
Hchstdruck Kolbenantrieb
Geschlossen, mit Druckluft ffnend HC1S
Hchstdruck Offen, mit Druckluft schliessend HO2S
Kolbenantrieb
zweistufig Geschlossen, mit Druckluft ffnend HC2S

4
Die untenstehende Tabelle erlaubt eine schnelle Selektion entprechender Bettgungsvorrichtungen basierend auf
Ventilausfhrung und Grsse, maximaler Systemarbeitsdruck und maximalem entsprechendem Pneumatikdruck.
Beispiel: Der Systemsarbeitsdruck betrgt 1723 bar (25,000 psi) und der verfgbare Pneumatikdruck 4,1 bar (60
psi) und ein normal offen (mit Druckluft schliessend) Ventil wird verlangt: ein 30VM oder 60VM Hchstdruckventil
kann Eingesetzt werden.

Geschlossen, mit Druckluft ffnend

Mitteldruck Hochdruck Hchstdruck Hchstdruck zweistufig
Ventil- Rohraussen- Pneumatik- Pneumatik- Pneumatik- Pneumatik-
Serien Systemdruck
durchmesser druck Systemdruck druck Systemdruck druck Systemdruck druck
in. (mm) psi (bar) psi (bar) psi (bar) psi (bar) psi (bar) psi (bar) psi (bar) psi (bar)
9/16 8,600 100 10,000 55 10,000 45 10,000 20
(14.3) (593) (6.9) (690) (3.8) (690) (3.10) (690) (1.4)
3/4 4,800 100 10,000 100 10,000 70 10,000 35
10SM (19.1) (331) (6.9) (690) (6.9) (690) (4.83) (690) (2.4)
1 2,800 100 6,300 100 8,500 95 10,000 55
(25.4) (193) (6.9) (434) (6.9) (586) (6.55) (690) (3.79)
1/4 20,000 95 20,000 50 __ __ __ __
(6.35) (1380) (6.5) (1380) (3.5)
3/8 20,000 100 20,000 55 __ __ __ __
(9.53) (1380) (6.9) (1380) (3.8)
9/16 10,700 100 20,000 85 20,000 65 20,000 30
20SM (14.3) (734) (6.9) (1380) (5.9) (1380) (4.48) (1380) (2.1)
3/4 6,100 100 13,600 100 19,000 100 20,000 50
(19.1) (421) (6.9) (938) (6.9) (1310) (6.90) (1380) (3.4)
1 3,900 100 8,800 100 19,000 95 20,000 75
(25.4) (269) (6.9) (607) (6.9) (1310) (6.55) (1380) (5.1)
1 __ __ __ __ __ __ 30,000 80
30SC (25.4) (2068) (5.5)
1/4 30,000 55 30,000 30 __ __ __ __
(6.35) (2068) (3.8) (2068) (2.0)
3/8 30,000 75 30,000 40 __ __ __ __
30VM (9.53) (2068) (5.2) (2068) (2.8)
9/16 30,000 75 30,000 40 __ __ __ __
(14.3) (2068) (5.2) (2068) (2.8)
9/16 __ __ 40,000 45 __ __ __ __
40VM (14.3) (2758) (3.1)
1/4 60,000 75 60,000 40 __ __ __ __
(6.35) (4137) (5.2) (4137) (2.8)
3/8 60,000 75 60,000 40 __ __ __ __
60VM (9.53) (4137) (5.2) (4137) (2.8)
9/16 60,000 90 60,000 45 __ __ __ __
(14.3) (4137) (6.2) (4137) (3.1)

Offen, mit Druckluft schliessend

9/16 7,900 95 10,000 75 10,000 60 10,000 40
(14.3) (545) (6.6) (690) (5.1) (690) (4.13) (690) (2.8)
10SM

3/4
(9.1)
__ __ __ __ 10,000
(690)
95
(6.55)
10,000
(690)
60
(4.1)
1 __ __ __ __ 6,500 100 10,000 85
(25.4) (448) (6.90) (690) (5.9)
1/4 20,000 95 20,000 50 __ __ __ __
(6.35) (1380) (6.6) (1380) (3.4)
3/8 18,250 95 18,250 50 __ __ __ __
(9.53) (1258) (6.6) (1258) (3.4)
20SM

9/16
(14.3)
9,800
(676)
95
(6.6)
15,700
(1082)
75
(5.1)
20,000
(1380)
85
(5.86)
20,000
(1380)
55
(3.8)
3/4 __ __ 6,000 75 15,000 100 20,000 80
(19.1) (414) (5.1) (1034) (6.90) (1380) (5.5)
1 __ __ 4,000 75 10,000 100 20,000 100
(25.4) (276) (5.1) (690) (6.90) (1380) (6.9)
1 __ __ __ __ __ __ 30,000 100
30SC (25.4) (2068) (6.9)
1/4 30,000 75 30,000 40 __ __ __ __
(6.35) (2068) (5.2) (2068) (2.8)
30VM

3/8
(9.53)
30,000
(2068)
95
(6.5)
30,000
(2068)
50
(3.5)
__ __ __ __

9/16 30,000 95 30,000 50

(14.3) (2068) (6.5) (2068) (3.5)
9/16 __ __ 40,000 55 __ __ __ __
40VM (14.3) (2758) (3.8)
1/4 60,000 95 60,000 50 __ __ __ __
(6.35) (4137) (6.5) (4137) (3.5)
60VM 3/8 60,000 95 60,000 50 __ __ __ __
(9.53) (4137) (6.5) (4137) (3.5)
9/16 60,000 95 60,000 50 __ __ __ __
(14.3) (4137) (6.5) (4137) (3.5)

5
Kupplungen
Die hier erwhnten Kupplungen sind fr die Verbindungen aller Kombinationen von Autoclave Standardrohren mit
Innengewinde (female-to-female). Weitere Ausfhrungen stehen auf Anfrage zur Verfgung.

Bestellbeispiele: A B Verbindung
Verbindung AE Mitteldruck AE Hochdruck
1. Nennweite in Tabelle A
lokalisieren Rohrab- Anschluss- Druck 1/4 3/8 9/16 3/4 1 1 1/4 3/8 9/16 9/16
messung variante psi*(bar) (6.35) (9.53) (14.3) (19.1) (25.4) (25.4) (6.35) (9.53) (14.3) (14.3)
2. Nennweite in Tabelle B in.(mm) SF250CX SF375CX SF562CX SF750CX SF1000CX F1000C43 F250C F375C F562C F562C40
entsprechend zuordnen
1/4 SF250CX 20,000 20FX 20F 20F 20F 20F 20F 20F 20F 20F
3. Die entsprechende Katalognummer
(6.35) (1380) 4466 4666 4966 41266 41666 41663 4463 4663 4963
finden Sie im Schnittpunkt der AE Mitteldruck
3/8 SF375CX 20,000 20FX 20F 20F 20F 20F 20F 20F 20F
beiden Tabellen. (9.53) (1380) 6666 6966 61266 61666 61663 6463 6663 6963

9/16 SF562CX 20,000 20FX 20F 20F 20F 20F 20F

(14.3) (1380) 9966 91266 91666 9463 9663 9963

3/4 SF750CX 20,000 20FX 20F 20F 20F 20F

(19.1) (1380) 12 121666 12463 12663 12963

1 SF1000CX 20,000 20FX 20F 20F 20F

(25.4) (1380) 16 16463 16663 16963

1 F1000C43 43,000 43F

(25.4) (2964) 16
A B
1/4 F250C 60,000 43F 60F 60F 60F
Verbindung Verbindung
AE Hochdruck

(6.35) (4140) 41633 4433 4633 4933

3/8 F375C 60,000 43F 60F 60F

(9.53) (4140) 61633 6633 6933

9/16 F562C 60,000 43F 60F

(14.3) 4140 91633 9333

9/16 F562C40 40,000 40F

(14.3) (2758) 9933

Aussen-/Inngewinde Adapter
Aussen-/Inngewindeadapter erlauben eine Verbindung zu anderen Nennweiten und/oder Anschlussvarianten.
Bei der Selektion eines Adapters fr zwei unterschiedliche Nennweiten, sollte die grssere Verbindung auf der Seite des
Aussengewindes liegen, zur Maximierung der mechanischen Kraft des Adapters.

Bestellbeispiele: AE Mitteldruck AE Hochdruck

1. Aussengewinde in vertikaler Innengewinde
t

1/4(6.35) 3/8(9.53) 9/16(14.3) 3/4(19.1) 1(25.4) 1(25.4) 1/4(6.35) 3/8(9.53) 9/16(14.3) 9/16 (14.3)
Spalte lokalisieren SF250CX SF375CX SF562CX SF750CX SF1000CX F1000C43 F250C F375C F562C F562C40
2. Entsprechendes Innengewinde Aussenge-
Passend Arbeits-
zum druck 20,000 20,000 20,000 20,000 20,000 43,000 60,000 60,000 60,000 40,000
winde
entsprechend zuordnen t
Innenge-
winde
psi*
(bar)
(1380) (1380) (1380) (1380) (1380) (2964) (4140) (4140) (4140) (2758)

3. Die entsprechende Katalognummer 1/4 SF250CX 20,000 20M46K6 20M49K6 20M412K6 20M416K6 20M44K3 20M46K3 20M49K3
finden Sie im Schnittpunkt der (6.35) (1380)

beiden Tabellen. 3/8 SF375CX 20,000 20M64K6 20M69K6 20M612K6 20M616K6 20M64K3 20M66K3 20M69K3
AE Mitteldruck

(9.53) (1380)

9/16 SF562CX 20,000 20M94K6 20M96K6 20M912K6 20M916K6 20M94K3 20M96K3 20M99K3
Andere Adapter (14.3) (1380)

AE liefert auf Wunsch viele andere 3/4 SF750CX 20,000 20M124K6 20M126K6 20M129K6 20M1216K6 20M124K3 20M126K3 20M129K3 20M129K40
(19.1) (1380)
Ausfhrungen von Adaptern,Einschliesslich
AE UniVersa-Lok gesenkgeschmiedete 1 SF1000CX 20,000 20M164K6 20M166K6 20M169K6 20M1612K6 20M1616K6 20M164K3 20M166K3 20M169K3
(25.4) (1380)
Verbindungen, Einschweissverschraubung
1 F1000C43 43,000 43M164B3 43M166B3 43M169B3 43M169B40
zum Rohraussen- bzw. nominalem Rohr- (25.4) (2964)
durchmesser, Aussen-/Inndurchmesser.
1/4 F250C 60,000 20M44B6 20M46B6 20M49B6 20M412B6 43M416B6 60M46B3 60M49B3
AE Hochdruck

(6.35) (4140)
Werkstoffe 3/8 F375C 60,000 20M64B6 20M66B6 20M69B6 20M612B6 20M616B6 43M616B6 60M64B3 60M69B3
Alle AE Adapter sind Przsionsteile aus (9.53) (4140)
kaltgeschmiedetem Edelstahl Typ 316. 9/16 F562C 60,000 20M94B6 20M96B6 20M99B6 20M912B6 20M916B6 43M916B6 60M94B3 60M96B3
Weitere Werkstoffe auf Anfrage. (14.3) (4140)
9/16 F562C40 40,000 20M912G6
(14.3) (2758)

*Nennleistung - Die Druckleistung der AE Kupplungen ist auf den niedrigsten Druck der Vergindung ausgelegt!

6
Fittinge, Komponenten & Zubehr
Anschluss-Typ Betriebsdruck Anschlussausfhrungen
in. (mm) psi (bar)
Dichtkonus und Gewindeausfhrung
fr hchsten und wiederholten Einsatz,

Mitteldruck 1/4 to 1
(6.35 to 25.4)
to 20,000
(1380)
einschliesslich Druckschraube und
Sttzring. Anti-Vibrationsdruckschrauben
lieferbar.

Dichtkonus- und Gewindeausfhrung fr

1 to 43,000
hchsten und wiederholten Einsatz. Anti-
(25.4) (2964)
Vibrationsdruckschrauben lieferbar.
Hochdruck
Dichtkonus- und Gewindeausfhrung fr
1/4 to 9/16 to 60,000
hchsten und wiederholten Einsatz. Anti-
(6.35 to 14.3) (4140)
Vibrationsdruckschrauben lieferbar.

Rohraussen- Kupplungen Kupplungen

durchmesser Arbeitsdruck und Universal- und Universal- Schottver-
in. (mm) psi (bar) Winkelstcke T-Stcke Kreuzstcke Kupplungen Kupplungen schraubung
1/4 (6.35) 20,000 (1380) CLX4400 CTX4440 CXX4444 20FX4466 20UFX4466 20BFX4466
3/8 (9.53) 20,000 (1380) CLX6600 CTX6660 CXX6666 20FX6666 20UFX6666 20BFX6666
Mitteldruck 9/16 (14.3) 20,000 (1380) CLX9900 CTX9990 CXX9999 20FX9966 20UFX9966 20BFX9966
3/4 (19.1) 20,000 (1380) CLX12 CTX12 CXX12 20FX12 20UFX12 20BFX12
1 (25.4) 20,000 (1380) CLX16 CTX16 CXX16 20FX16 20UFX16 20BFX16
1 (25.4) 43,000 (2964) 43CL16 43CT16 43CX16 43F16 43UF16 43BF16
9/16 (14.3) 40,000 (2760) 40CL9900 40CT9990 40CX9999 40F9933 40UF9933 40BF9933
Hochdruck 1/4 (6.35) 60,000 (4140) CL4400 CT4440 CX4444 60F4433 60UF4433 60BF4433
3/8 (9.53) 60,000 (4140) CL6600 CT6660 CX6666 60F6633 60UF6633 60BF6633
9/16 (14.3) 60,000 (4140) CL9900 CT9990 CX9999 60F9933 60UF9933 60BF9933

Berstscheiben-
Anschluss-Komponenten Rckschlagventile Leitungsfilter halterung

Rohraussen-
durchmesser Arbeitsdruck Kugel-Type
Doppelfilter- Tassen- Berstscheiben-
in. (mm) psi (bar) Dichtschraube Druckring Stopfen O-Ring Kugel
Durchflussber-
schuss scheiben Filterelement sicherung

1/4 (6.35) 20,000 (1380) CGLX40 CCLX40 CPX40 CXO4400 CXB4400 CXK4402 - CXF4 CSX4600*
3/8 (9.53) 20,000 (1380) CGLX60 CCLX60 CPX60 CXO6600 CXB6602 CXK6602 - CXF6 CSX6600*
Mitteldruck 9/16 (14.3) 20,000 (1380) CGLX90 CCLX90 CPX90 CXO9900 CXB9900 CXK9902 CLFX9900 CXF9 CSX9600*
3/4 (19.1) 20,000 (1380) CGLX120 CCLX120 CPX120 CXO12 CXB12 CXK1202 - - -
1 (25.4) 20,000 (1380) CGLX160 CCLX160 CPX160 CXO16 CXB16 CXK1602 - CXF16 -
1 (25.4) 43,000 (2964) CGLX160 CCLX160 43CP160 43CO16 43CB16 - - - -

9/16 (14.3) 40,000 (2760) AGL90 ACL90 AP90 - - - - - -
Hochdruck 1/4 (6.35) 60,000 (4140) AGL40 ACL40 AP40 CKO4400 CB4401 CK4402 CLF4400 CF4 CS4600*
3/8 (9.53) 60,000 (4140) AGL60 ACL60 AP60 CKO6600 CB6601 CK6602 CLF6600 CF6 CS6600*
9/16 (14.3) 60,000 (4140) AGL90 ACL90 AP90 CKO9900 CB9901 CK9902 CLF9900 CF9 CS9600*

*Gibt Abmessung der Bertscheibe an

7
Hochdruckrohre
Autoclave Engineers bieten eine komplette Auswahl an austenitisch,
kaltgezogenen Edelstahlrohren nach strengsten AE-Vorschriften fr
Ventile und Fittinge an. AE Rohre sind speziell fr Hchstdruckanwen-
dungen betreffend Festigkeit und Korrosionsbestndigkeit hergestellt.
Die Herstellungslngen liegen zwischen 6,1 m und 8,2 m (20 und 27 feet).

Inspektion und Prfung

Die Eingangskontrolle von AE garantiert, dass die Rohre frei von Nhten,
berlappstssen, Rissen und anderen Fabrikationsfehlern sind. Die Aussen- und
Innendurchmesser der Rohre werden einer speziellen Kontrolle und Inspektion
unterzogen, um eine einwandfreie Passung zu garantieren. Die mechanischen und
hydrostatischen Eigenschaften werden ebenfalls regelmssig durch Stichprobentests
kontrolliert.

Abmessung in.(mm) Betriebsdruck psi (bar)
Katalog Wandstrke Durchfluss-
Aussendurch- Innendurch- nominal flche -325 to 100F 200F 400F 600F 800F
Nummer Material Anschlusstyp messer
In. (mm)
messer
In. (mm)
In. (mm) In.2 (mm2) (-198 to 38C) (93C) (204C) (316C) (427C)

MS15-092 316SS 20,000 20,000 19,250 18,050 16,800
1/4 .109 .070 .009 (1380) (1380) (1330) (1250) (1160)
SF250CX (6.35) (2.77) (1.78) (5.81)
MS15-192 304SS 20,000 18,950 17,200 17,000 16,150
(1380) (1310) (1190) (1170) (1110)
MS15-093 316SS 20,000 20,000 19,250 18,050 16,800
3/8 .203 .086 .032 (1380) (1380) (1330) (1250) (1160)
SF375CX (9.53) (5.16) (2.18) (20.6)
MS15-193 304SS 20,000 20,000 19,250 18,050 16,800
(1380) (1380) (1330) (1250) (1160)
MS15-085 316SS 20,000 20,000 19,250 18,050 16,800
9/16 .312 .125 .076 (1380) (1380) (1330) (1250) (1160)
SF562CX (14.3) (7.92) (3.17) (49)
MS15-187 304SS 20,000 20,000 19,250 18,050 16,800
(1380) (1380) (1327) (1250) (1160)
MS15-097 316SS 15,000 15,000 14,400 13,650 12,670
9/16 .359 .101 .101 (1034) (1034) (992) (941) (874)
SF562CX (14.3) (9.12) (2.56) (65.2)
MS15-194 304SS 15,000 14,170 12,900 12,750 12,670
(1034) (977) (890) (880) (874)
MS15-095 316SS .438 .156 .151 20,000 20,000 19,250 18,050 16,800
3/4 (11.1) (3.96) (97.4) (1380) (1380) (1330) (1250) (1160)
SF750CX
(19.1) .516 .117 .209 15,000 15,000 14,400 13,650 12,670
MS15-098 316SS
(13.1) (2.97) (135) (1034) (1034) (993) (941) (874)
MS15-096 316SS .562 .219 .248 20,000 20,000 19,250 18,050 12,670
1 (14.3) (5.56) (160) (1380) (1380) (1330) (1250) (874)
SF1000CX
(25.4) .688 .156 .371 15,000 15,000 14,400 13,650 12,670
MS15-099 316SS
(17.5) (4.02) (239) (1034) (1034) (992) (941) (874)
MS15-081 316SS 60,000 60,000 57,750 54,250 50,700
1/4 .083 .083 .005 (4140) (1380) (1380) (1380) (1380)
F250C
(6.35) (2.11) (2.11) (3.22) 60,000 56,800 51,650 50,700 48,450
MS15-182 304SS
(4140) (3910) (3560) (3500) (3340)
MS15-087 316SS 60,000 60,000 57,750 54,250 50,700
F375C 3/8 .125 .125 .012 (4140) (4140) (3980) (3740) (3490)
(9.53) (3.18) (3.18) (7.74) 60,000 56,800 51,650 50,700 48,450
MS15-183 304SS
(4140) (3910) (3560) (3500) (3340)
MS15-083 316SS 60,000 60,000 57,750 54,250 50,700
9/16 .187 .187 .028 (4140) (4140) (3980) (3740) (3490)
F562C
MS15-185 304SS (14.3) (4.78) (4.78) (18) 60,000 56,800 51,650 50,700 48,450
(4140) (3910) (3560) (3500) (3340)
1 .438 .281 .151 43,000 40,600 36,900 36,300 34,700
MS15-199 304SS F1000C43 (25.4) (11.1) (7.14) (97.4) (2964) (2799) (2544) (2502) (2392)
1 .438 .281 .151 43,000 43,000 43,000 41,380 36,330
MS15-211 316SS F1000C43 (25.4) (11.13) (7.14) (97.4) (2964) (2964) (2964) (2853) (2504)
MS15-090 316SS F562C40 9/16 .25 .156 .048 40,000 40,000 38,500 36,100 33,800
(14.3) (6.35) (4.02) (31) (2760) (2760) (2655) (2489) (2330)
Bemerkung: Fr autofrettierte Rohre der Teile-Nummer den Zusatz ESR42 hinzufgen.
8
Nippel (konisch/mit Gewinde)
Autoclave Engineers bietet vorgefertigte mit Konus und
Gewinde versehene Nippel in verschiedenen Abmessungen
und Lngen um schnellere Installationen zu gewhrleisten.

Sonderlngen
Zustzlich zu den in der untenstehenden Tabelle
aufgefhrten Lngen sind Sonderlngen auf Anfrage
lieferbar.

Material
Edelstahl Typ 316, falls nicht anderweitig spezifiert.

Abmessung in.(mm)
Katalog-Nummer
Betriebsdruck
bei 100F (38C) 2.75 3 4 6 8 10 12
Aussendurch- Innendurch- psi (bar)
Anschlusstyp messer messer Lnge Lnge Lnge Lnge Lnge Lnge Lnge
SF250CX 1/4 (6.35) .109 (2.77) 20,000 (1380) CNX4402 CNX4403 CNX4404 CNX4406 CNX4408 CNX44010 CNX44012
SF375CX 3/8 (9.53) .203 (5.16) 20,000 (1380) CNX6603 CNX6604 CNX6606 CNX6608 CNX66010 CNX66012
SF562CX 9/16 (14.3) .312 (7.92) 20,000 (1380) CNX9904 CNX9906 CNX9908 CNX99010 CNX99012
SF562CX 9/16 (14.3) .359 (9.12) 15,000 (1034) CNLX9904 CNLX9906 CNLX9908 CNLX99010 CNLX99012
SF750CX 3/4 (19.1) .438 (11.1) 20,000 (1380) CNX1204 CNX1206 CNX1208 CNX12010 CNX12012
SF750CX 3/4 (19.1) .515 (13.1) 15,000 (1034) CNLX1204 CNLX1206 CNLX1208 CNLX12010 CNLX12012
SF1000CX 1 (25.4) .562 (14.3) 20,000 (1380) CNX1606 CNX1608 CNX16010 CNX16012
SF1000CX 1 (25.4) .688 (17.5) 15,000 (1034) CNLX1606 CNLX1608 CNLX16010 CNLX16012
F250C 1/4 (6.35) .083 (2.11) 60,000 (4140) CN4402 CN4403 CN4404 CN4406 CN4408 CN44010 CN44012
F375C 3/8 (9.53) .125 (3.18) 60,000 (4140) CN6603 CN6604 CN6606 CN6608 CN66010 CN66012
F562C 9/16 (14.3) .187 (4.78) 60,000 (4140) CN9904 CN9906 CN9908 CN99010 CN99012
F562C40 9/16 (14.3) .250 (6.35) 40,000 (2760) 40CN9904-316 40CN9906-316 40CN9908-316 40CN99010-316 40CN99012-316
F1000C43 1 (25.4) .438 (11.1) 43,000 (2964) 43CN1606-304 43CN1608-304 43CN16010-304 43CN16012-304

Bemerkung: Bitte Katalognummer mit Materialnummer -316 oder -304 ergnzen, falls nicht angegeben.

Vibrationssichere Rohranschlsse
Vibrationen und/oder Erschtterungen knnen die Arbeitsweise in Rohrsystemen beintrchtigen. Aus diesem
Grund bietet Autoclave Engineers komplett mit AE Hochdruckverbindungen austauschbare -
vibrationssichere Rohranschlsse.

Katalog-Nummer Druckschraube Druckschraube

Sttzringmutter Sttzringmutter
Anschluss- Mitteldruck Hochdruck
grsse bis bis HD-Rohr Ventilkper
in. (mm) to 20.000 psi 60.000 psi (vibrationssichere Sttzringkrpor
Klemmuntersttzung)
Ventilkper
1/4 (6.35) KCBGLX40-316MC KCGL40-316
HD-Rohr
(vibrationssichere
3/8 (9.53) KCBGLX60-316MC KCGL60-316 Druckring* Kelmmuntersttzung)

Druckring*
9/16 (14.3) KCBGLX90-316MC KCGL90-316 Dichtung

Dichtung
3/4 (19.1) KCBGLX120-316MC -

1 (25.4) KCBGLX160-316MC KCBGLX160-316MC Serie KCBGLX

Drcke bis 20.000 psi (1380 bar)
Serie KCGL
Drcke bis 60.000 psi (1440 bar)

1 Hochstdruck bis 43.000 psi (2964 bar) *ohne AE-Druckring!

9
AE Manometer
Werkstoff/Eigenschaften
Genauigkeit +/- 0.5%
Kunststoff-Einstellscheibe/Vorderseite Aluminiumguss
berdruck-Entlastungsventil
Werkstoff 316 Edelstahl Rohrverbindung
Przisionsedelstahlfhrung fr hohe Passgenauigkeit und Witterungsbestndigkeit
Nadel-Nullinieneinstellung

Qualitts-Manometer
Bndige Panel-Befestigung austauschbare Anzeigenscheibe
zur Installation auf jedem Qualitts-Manometer. Dies wird gesondert berechnet, falls
der Auftrag mit dem Zusatz PM gekennzeichnet ist.
Optional elektrische Kontaktanzeige-lieferbar fr alle Qualitts-
Manometer, justierbar fr niedrige und hohe elektrische Kontakte.

** Manometer aus Inconel 718 fr Bourdon-Rohre von 0-80.000 psi (0-5116 bar) und 0-50.000 psi (0-3447 bar).
Manometer aus K Monel fr Bourdon-Rohre von 0-30.000 psi (0-2068 bar).

Bemerkung: Fr Manometer mit

rckseitigem Anschluss bitte den 1/4 (F250C)
Dichtkonuns und Linksgewinde
Buchstaben B zur Bestellnummer mit Druckring und Druckschraube
hinzufgen. Beispiel: P-047B-CG

Kalibriert (ausschliesslich) in PSI

Katalog Kleinster Scheiben-

Nummer Druckbereich Intervallwert durchmesser
(psi) (psi) (inches)

P-0499-CG 0-1000 10 4-1/2

Optional elektrische Kontaktanzeige

Passend zum Scheiben-du-
Katalog-Nummer rchmesser (inches)

P-0713 4-1/2
P-0714 6

10
Sonderprodukte
Kugelventile
AE Kugelventile sind fr Auf-Zu und Schnellfluss-
applikationen konstruiert. In der Offen-Stellung (nicht
absperrend) werden Druckverluste minimiert.
AE Kugelventile sind konomisch, praktisch wartungsfrei
und garantieren eine lange Lebensdauer. Einteilige
Ventilspindel, zapfengelagert, verhindert
Scherbruch und reduziert den Einfluss von
Seitenkrften,wie sie bei einer zweiteiligen
Spindel auftreten knnen. Ein niedriges
Drehmoment verhindert Verschleiss und
verlngert die Lebensdauer.

Die AE Kugelventile gewhrleisten einen sicheren

Gebrauch bei Betriebsdrcken bis zu 20,000 psi bei
200F (1380 bar bei 93C) sowie bei Temperaturen bis zu
500F bei 5,000 psi (260C bei 345 bar).
AE Kugelventile sind in 2- und 3-Wege Ausfhrungen
mit Dsenweiten von 0,187 bis 0,500 (4,7 mm bis
12.7mm) lieferbar. Konstruktionsmerkmale: Edelstahl 316,
PEEK-Auflage, einteilig zapfengelagerte Ventilspindel.

berdruckventile Serie RVP & RVS

Autoclave Engineers berdruckventile der Serien RVP & RVS sind fr Gase und Flssigkeiten
geeignet und schtzen Systeme vor unbeabsichtigten Druckerhhungen. Betriebsdrcke von
1.500 psi (103 bar) bis 60,000 psi (4140 bar). Standardmssig knnen sie fr
Betriebstemperaturen von 423F bis 400F (-253C bis 204C) = RVP Modelle, eingesetzt
werden. Hhere Temperaturen sind bei Sonderaushrungen bis zu 750F (400C) mglich.
Die Betriebstemperaturskala der RVS Modelle betrgt 32F bis 400F (0C bis 204C). (Zur
Beachtung: Sitz-Material = ARLON).
Die Durchflusscharakteristik des berdruckventils ist an einer Akkumulation von 10% ber den
Einstelldruck definiert. Es wird deshalb empfohlen und hat sich in der Praxis bewhrt zum
zustzlichen Schutz eine entsprechende Berstscheibensicherung zu verwenden.

Anschlussgrsse
und Typ Druckleistung
(inches) PSIG bei 100F (bar bei 38C)

Katalog- Eingang Ausgang Dse Min. Max. Max.

nummer FNPT in. (mm) Einstellung Einstellung Rckfluss
5RVP9072 SF562CX 3/4 (19.1) .312 (7.92) 3,000 (207) 5,000 (345) 500 (34.5)
10RVP9072 SF562CX 3/4 (19.1) .250 (6.35) 5,000 (345) 10,000 (690) 500 (34.5)
15RVP9072 SF562CX 3/4 (19.1) .188 (4.78) 10,000 (689) 15,000 (1034) 500 (34.5)
20RVP9072 SF562CX 3/4 (19.1) .156 (4.02) 15,000 (1034) 20,000 (1379) 500 (34.5)
30RVP6072 F375C 3/4 (19.1) .125 (3.18) 20,000 (1379) 30,000 (2068) 500 (34.5)
45RVP9072 F562C 3/4 (19.1) .093 (2.36) 25,000 (1724) 45,000 (3103) 500 (34.5)
60RVP6072 F375C 3/4 (19.1) .078 (1.98) 30,000 (2060) 60,000 (4137) 500 (34.5)
Weicher Sitz
5RVS9072 SF562CX 3/4 (19.1) .312 (7.92) 1,500 (103) 5,000 (345) 500 (34.5)
10RVS9072 SF562CX 3/4 (19.1) .250 (6.35) 5,000 (345) 10,000 (690) 500 (34.5)
20RVS9072 SF562CX 3/4 (19.1) .156 (4.02) 10,000 (690) 20,000 (1379) 500 (34.5)

11
Sonderprodukte
Verteilerblock
Spezielle Verteilerblcke minimieren den Platzbedarf, reduzieren Installationszeit. Zustzlich werden bei der
Installation von weniger Komponenten evtl. Leckagen reduziert.
Autoclave Engineers konstruiert und fertigt Hochdruckventile fr spezielle Applikationen und Betriebsdrcke.
Die Verteiler sind fr Druckanwendungen von Vakuum bis 60.000 psi (4137 bar) und sind in verschiedenen
Werkstoffen und Abmessungen und Anschlussvarianten wie z.B. NPT, SAE, BSP und weiteren, lieferbar.

12
Werkzeuge
AE Mikrometer Drehmomentschlssel
P-1680 20 to 150 ft. lbs. (27 to 203 Nm)
91020 75 to 250 ft. lbs. (102 to 339 Nm)
Przises Festziehen aller AE Packungsschrauben und Rohrmuttern ist unbedingt erforderlich.
Der Drehmomentschlssel kann auf die untenstehenden Schlsselweiten engestellt werden und
mit austauschbaren Schlssel-Adaptern fr Muttern von 1/2 bis 1-7/8 verwendet werden.Teile-/
Bestellnummer: siehe Tabelle.

Packungsschraub-
oder Rohrmutter- 1/2 9/16 5/8 3/4 13/16 7/8 15/16 1 1-1/16 1-3/16 1-3/8 1-1/2 1-7/8
Schlsselweite (12.7) (14.3) (15.9) (19.05) (20.6) (22.2) (23.8) (25.4) (27) (30.2) (34.9) (38.1) (47.6)
in. (mm)
Teile-Nr. Drehmo- P-1681 P-1682 P-1683 P-9813 P-1685 P-1686 P-1687 P-9901 P-1688 P-1689 P-1690 P-6040 P-10076
ment-schlssel-
Adapter

Hydraulischer Rohrbieger
AE Biegewerkzeuge ermglichen ein schnelles,
genaues und einfaches Biegen von dickwandigen
Hochdruckrohren. Der Rohrbieger wird komplett
mit Pumpe, Zylinder, Rahmen und Biegebacken
im tragbaren Koffer geliefert. (Bestell-Nr.: HTB)
Pneumatisch bettigte Pumpe ist optional
lieferbar. (Bestell-Nr.: HTB-A)

Konus- und Gewindeschneidemaschine

Bestell-Beispiel: Model # AEGCTM-2
Separate Kpfe fr Konus- und Gewindeschneiden werden motorisch von einem Antriebsaggretat gesteuert.
Modelle sind fr Mittel-und Hochdruckrohre lieferbar.
Ca-Abmessungen: 1,4 m x 0,7 m x 0,5 m (56 x 28 x 20) - Gewicht: 159 kg (350 pounds)-
Werkzeuge sind gesondert zu bestellen, bitte mit der Werk in Verbindung setzen.

Merkmale
1/2 PS Motor, 220 VAC, 50 Hz (115 VAC, 60 Hz) Volt Kondensatror Start.
Kein Rcklauf erforderlich beim Gewindeschneiden; aufspringende Schneideisen verhindern
Beschdigung des Gewindes.
Kompletter Werkzeugsatz lieferbar, bitte Werkzeuggrssen spezifizieren.
Konusschneidkopft mit Federwalze fr przise Beschickung.
Komplett mit lpumpe und Behlter.
Die Einheit ist komplett auf einem Gestall mit feststellbaren Laufrollen montiert.
Lieferbar optional mit Tankheizung
CE-Kennzeichen auf 220 VAC, 50 Hz Modelle.

13
Werkzeuge
Rohrendbearbeitungswerkzeuge
Autoclave Engineers fertigt ein manulles Konusschneidwerkzeug fr eine optimale Konus-Performance fr Rohre
bis 14.3 mm (9/16 Aussendurchmesser. Dieses Przisions-und Qualtitswerkzeug kann an Ort und Stelle zum
Bearbeiten von AE Mittel- und Hochdruckrohren eingesetzt werden.

Austauschbare Muttern fr jede Rohrgrsse gewhrleisten eine exakte Zentrierung der Rohre. Die Schneide-
zufhrung erlaubt es dem Bediener die Einschnitt-tiefe genau zu kontrollieren. Der Einsatz der austauschbaren,
rechtwinkeligen Schneidebltter gewhrleisten einen genaueren und schnelleren Schneidevorgang. Das Gewin-
deschneidwerkzeug kann fr alle Rohraussendurchmesser bis 14,3 mm (9/16) benutzt werden. Hierzu ist es
lediglich notwendig, das Schneideisen und die Fhrungsbuchse im Werkzeug auszutauschen.
Bemerkung: Kompletter Werzeugsatz lieferbar.
Bitte mit unserem Werk in Verbindung setzen.
Konusschneidwerkzeug

Gewindeschneidewerkzeug
Schneidlager

Spannmutter

Werkzeugkrper
(Gehase)
Mutter

Rohrdurchmesser Teile-Nr. Konusschneidwerkzeug und Ersatzteile Teile-Nr. Gewindeschneidwerkzeug und Ersatzteile

Aussendurch- Innendurch- Schneid- Werkzeug mit Gewindeschneideisen

messer messer messer Schneideisin
Werkzeug mit und Buchse
in.(mm) in.(mm) Mutter und Messern Mutter (2 Stck) Werkzeug Teile-Nr. Abmessung* Fhrungsbuchse

1/4 (6.35) .109 (2.77) MCTM4 90248 101F-1577 402A 402 P-0214 1/4-28 1010-0343
AE Mitteldruck

3/8 (9.53) .203 (5.16) MCTM6 90250 101F-1601 402C 402 P-0215 3/8-24 1010-0344

9/16 (14.3) .312 (7.92) MCTM920 90251 1010-5218 402E 402 P-0216 9/16-18 1010-0345

9/16 (14.3) .359 (9.12) MCTM910 90251 101A-1897 402E 402 P-0216 9/16-18 1010-0345

1/4 (6.35) .083 (2.11) MCTH4 90248 101F-3939 402A 402 P-0214 1/4-28 1010-0343
AE Hochdruck

3/8 (9.53) .125 (3.18) MCTH6 90250 101F-1578 402C 402 P-0215 3/8-24 1010-0344

9/16 (14.3) .188 (4.78) MCTH960 90251 1010-0883 402E 402 P-0216 9/16-18 1010-0345

9/16 (14.3) .250 (6.35) MCTH940 90251 101C-7214 402E 402 P-0216 9/16-18 1010-0345

Empfohlenes l: P-8784
*Alle Gewinde der AE Mittel- und Hochdruckrohre entsprechen LH National Fine (Klasse 2).
Zur Beachtung: Rohrendbearbeitungswerkzeuge (Konus- und Gewindeschneiden) fr 3/4 (19,1 mm) und 1 (25,4 mm) Aussendurchmesser
fr Mittel- und Hochdruckrohre sind nicht lieferbar.
Fr diese Abmessungen ist das Modell AEGCTM-2 einzusetzen.

14
Durchflusswerte
Koeffizient des Durchflusses (Cv) fr Ventile ist das Wasservolumen in U.S. Gallonen pro Minute bei
Raumtemperatur und vllig geffneter Ventilspindel und einem Druckabfall von 1 psi. Cv gibt den
Abmessungsfaktur zur Auswahl des entsprechenden Ventils an.
Die CV -Werte - siehe Bestellbezeichungen Ventile - geben den vollen Durchfluss fr dieses Ventil an. Zur
Festlegung geschtzer Kapazitt sollte dieser CV -Wert in noch folgenden Formeln verwendet werden.

Durchflussformeln
Flssigkeiten
V = CV P1 - P2
q Durchfluss, U.S. gal./min. SGF

q Durchfluss, lb./hr. W = 500 CV (P1 - P2) /SGF

Gase *=
Q = 42.2 CV (P1 - P2) (P1 + P2)
q Durchfluss, SCFH SGF
=
Q = 963 CV (P1 - P2) (P1 + P2)
q Durchfluss, SCFH
(bei angepasster Temperatur) SGF TF
=
W = 3.22 CV (P1 - P2) (P1 + P2)/SG
q Durchfluss, lb./hr.

Nassdampf =
W = 2.1 CV (P1 - P2) (P1 + P2)
q Durchfluss, lb./hr.
=
Heissdampf W = 2.1 CV (P1 - P2) (P1 + P2)
q Durchfluss, lb./hr. (1 + 0.0007 TS)

Spezifisches Gewicht (SG ) Spezifisches Gewicht (SGF ) Nomenklatur

typischer Gase typischer Gase
SG @ RT SGF @ RT V = Durchfluss, (GPM)
Gase im Verhaltnis Gase in Bezug auf
zu Luft Wasser Q = Durchfluss, (SCFH)

W = Durchfluss, (lb./hr.)
Acethylen 0.897 Azeton 0.792
Luft 1.000 Alkohol 0.792 P1 = Eingangsdruck, (14.7 + psig)

Ammoniak 0.587 Waschbenzin 0.902 P2 = Ausgangsdruck, (14.7 + psig)

Argon 1.377 Benzin 0.751 SGF = Spezifisches Gewicht-Flssigkeiten (wasser = 1.0)

Butan 2.070 Benzin, nat. 0.680
SG = Spezifisches Gewicht-Gase-(luft = 1.0)
Kohlendioxid 1.516 Kerosene 0.815
TF = Fliesstemperatur, R absolut (460 + F)
Ethylen 0.967 Petroleum 0.624
TS = Heissdampftemperatur F
Helium 0.138 Wasser 1.000
Wasserstoff 0.0695 CV = Ventil Koeffizient des Durchflusses, offen

Methan 0.553
Stickstoff 0.966 *Auswirkung der Fliesstemperatur bei Gas sind minimal bei Temperaturen zwishcen
30F und 150 F.
Sauerstoff 1.103 = Wenn Ausgangsdruck P2 geringer ist als 1/2 des Eigangsdruck P1:
Propangas 1.562 (P1 - P2) (P1 + P2): wird 0.87 P1.
Schwefeldioxid 2.208
Bemerkung: Die maximalen Cv-Werte in diesem Katalog sind festgelegt unter Zugrundele-
gung des Fluid Control Institute Berichtes FCI 58-2. Recommended Voluntary Standards
for Measurement Procedure for Determining Control Valve Flow Capacity, einschliesslich
Verfahrenstest, Konstruktion der Prfstde sowie Auswertung der Kenndaten.

15
Anschlussteile

AE Mitteldruck SFCX
Abmessungen
Rohr-Aussen- inches (mm) 60
durchmesser Anschlusstyp
in. (mm)
A B C D F H B
Gewinde
A
1/4 SF250CX20 25/64 7/16 -20 .28 .50 .19 .109 Bohrung
(6.35) (7.11) (12.7) (4.83) (2.77) F

3/8 SF375CX20 33/64 9/16 -18 .38 .62 .31 .203 D

C
(9.53) (9.65) (15.7) (7.87) (5.16)
9/16 SF562CX20 3/4 13/16 -16 .44 .75 .50 .359 5
(14.3) (11.2) (19.1) (12.7) (9.12)
Abspritzloch
3/4 SF750CX20 61/64 3/4 -14z .50 .94 .62 .516 H
(19.1) (12.7) (23.9) (15.7) (13.1)
Z = NPS Gewindezapfen
1 SF1000CX20 1-19/64 1-3/8 -12 .81 1.31 .88 .688
(25.4) (20.6) (33.3) (22.4) (17.5)

AE Hochdruck FC
Abmessungen
Rohr-Aussen- inches (mm)
durchmesser Anschlusstyp
in. (mm) 60
A B C D F H
B
Gewinde
1/4 F250C 33/64 9/16 -18 .38 .44 .17 .094 A
Bohrung
(6.35) (9.65) (11.2) (4.32) (2.39) F
3/8 F375C 11/16 3/4 -16 .53 .62 .26 .125 5 C D
(9.53) (13.5) (15.7) (6.60) (3.18)
9/16 F562C 1-3/64 1-1/8 -12 .62 .75 .38 .188
(14.3) (15.7) (19.1) (9.65) (4.78) Abspritzloch
9/16 F562C40 1-3/64 1-1/8 -12 .62 .75 .38 .250
(14.3) (15.7) (19.1) (9.65) (6.35) H

1 F1000C43 1-19/64 1-3/8 -12 .81 1.31 .88 .438

(25.4) (20.6) (33.3) (22.4) (11.1)

Bemerkung: Alle Abmessungen sind freibleibend und dienen lediglich zur Orientierung.
*Fr ffnungsdiameter siehe Dsenabmessungen fr spezifische Ventile und Fittinge.
Alle Gewinde entsprechen den Klassen 2A oder 2B.

!ACHTUNG!
EINE FALSCHE ODER UNSACHGEMSSE AUSWAHL ODER ANWENDUNG DER HIERIN BESCHRIEBENEN PRODUKTE UND/ODER SYSTEME ODER DER DAMIT ZUSAMMENHNGENDEN ARTIKEL KANN ZU
UNFLLEN MIT TODESFOLGE, PERSONEN- ODER SACHSCHDEN FHREN.
Dieses Dokument und andere Informationen von Snap-tite, Inc., ihren Tochtergesellschaften und ihren Vertragshndlern beschreiben Produkt- und/oder Systemoptionen die von Anwendern mit
technischer Erfahrung eingehender zu prfen sind. Es ist wichtig, da Sie alle Aspekte des vorgesehenen Einsatzzwecks analysieren und die Produkt- oder Systeminformationen im aktuellen Produktkatalog
beachten. Aufgrund der Vielfalt der Einsatzbedingungen und Anwendungsbereiche fr diese Produkte und Systeme trgt der Benutzer die alleinige Verantwortung dafr da er auf der Grundlage der von ihm
durchgefhrten Analysen und Tests die geeigneten Produkte und Systeme auswhlt. Der Benutzer mu darber hinaus sicherstellen, da in Zusammenhang mit dem Einsatz alle relevanten Leistungsanforderun-
gen, Sicherheits- und Warnhinweise beachtet und eingehalten werden.
Die hierin beschriebenen Produkte, einschlielich ihrer Merkmale, Spezifikationen, Entwurfsmuster, Lieferbarkeit und Preise, knnen ohne besondere Ankndigung jederzeit von der Snap-tite, Inc. und/
oder ihren Tochtergesellschaften gendert werden.

10V
10VRMM
MV/MVE
SW
10P/15P
10SM/20SM
30VM
30VRMM
60VM
60VRMM
100VM

Manual Valves
Operation and Maintenance Manual

Catalog: 02-0024ME January 2013

Model # Order #

Serial # Mfg. Date

Drawing #

Table of Contents page

1.0 Installation ............................................................................................................ 2

2.0 Packing Adjustment............................................................................................... 2

3.0 Packing or Stem Replacement.............................................................................. 2

4.0 Seat Replacement ................................................................................................ 4

5.0 Service .................................................................................................................. 4

6.0 Installation Summary Chart .................................................................................. 5

Section 1.0 is not available, tighten the packing gland approximately

Installation 1/16 turn.

5. Pressurize the valve to the maximum operating pressure

No adjustments are necessary prior to installation. Refer to and check for leaks.
Parker Autoclave Engineers Valve, Fitting and Tubing Catalog
(Installation Section) for proper tubing connection installation. 6. If the packing still leaks, relieve all pressure in the valve
and repeat steps 4 and 5. If the packing does not seal after
Note: The minimum and maximum temperature limits of the several attempts, it needs replaced (refer to Section 3.0).
connection style and materials listed in the Valve, Fitting and
Tubing Catalog. 7. Reinstall the packing gland locking device.

Section 2.0 Section 3.0

Packing Adjustment Packing or Stem Replacement

If the valve packing starts to leak, follow the steps listed below to
reseal the valve stem.
! CAUTION
Note: The minimum and maximum temperature limits of the ap- If stem removal is necessary on a MicroMetering (VRMM
propriate packing listed in the Valve, Fitting and Tubing Catalog. series) valve, it must be returned to the factory as precise
adjustments are necessary after assembly to achieve mini-
1. Relieve all pressure from the valve and remove it from the mum flow capability of the valve.
system.

2. Turn valve stem to full open position.

1. Relieve all pressure from the valve and remove it from the
3. Loosen the packing gland locking device. system.

4. While holding the valve body secure, use a torque wrench 2. Turn valve stem to full open position.
to tighten the packing gland to the value shown on the
3. Remove the packing gland locking device.
attached Installation Summary Chart. If a torque wrench

Parker Autoclave Engineers

Instrumentation Products Division
2 Erie, PA USA
www.autoclave.com | Cat. 02-0024ME
4. While holding the valve body (or housing for HT and to the value in the Installation Summary Chart. Open the
LT valves) secure, unthread and remove the packing valve completely, then close it one turn to remove the
gland. The packing will stay on stems that have a larger play. Finger tighten the hex nut, then use a wrench to
stem tip below the packing (see Fig. 3: SW8, 10/20SM9, tighten it approximately 1/8 of a turn. Install the lock nut
10/20SM12, 10/20SM16). and finger tighten it in place. While holding the lock
nut secure, loosen the hex nut from the top washer
Note: For HT and LT valves, the housing must be removed and tighten it against the lock nut approximately 1/16
where the stem tip is larger than the body cone ring ID of a turn. Replace the handle by lining the hex socket set
(SW6, SM12 and SM16 valves). Remove the housing screw up against the flat spot on the stem sleeve and
locking device and unscrew the housing from the valve tightenit in place (DO NOT OVERTIGHTEN). In order
body. to have a nonrotating stem, a slight amount of free play
must exist between the stem sleeve and shaft.
5. Autoclave Engineers manual valves have three different
The handle should have a 10 degree maximum free play
type of stems; one piece non-rotating (figure 2), two piece
for "backlash". If the free play is excessive, it will be
pinned non-rotating (figure 4) and rotating (figure 5).
necessary to remove the handle and loosen the lock
Follow steps 6-9 for one piece non-rotating stems, steps
nut and tighten the hex nut further against the thrust
10-11 for two piece pinned non-rotating stems and
washer. Tighten the lock nut as indicated above and check
step 12 for rotating stems.
for free play. When the desired "backlash" is achieved,
One piece non-rotating stem replace the handle as described above. Re-install the
locking device.
6. For stems without a larger stem tip, remove the bottom
washer, packing and packing washer in the body. Place Two piece pinned non-rotating stems
the bottom washer, packing and packing washer in the
10. For high and low temperature valves that have two piece
body. If the stem does not require replacement, screw
non-rotating stems, remove the groove pin holding
the packing gland back into the body and tighten the
packing gland to the value in the Installation Sum- LOCK NUT
mary Chart.
HEX NUT

7. Remove the handle by loosening the set screw(s) located SECOND THRUST WASHER
in the larger hole of the handle (use a 5/32 hex wrench
for the 3" long handle, a 3/16 hex wrench for the 4" and
10-1/4" long handle) and remove it from the stem sleeve.
Unscrew the stem from the packing gland. Remove the
two nuts and thrust washer from the top of the stem STEM SLEEVE

assembly. Remove the stem from the stem sleeve.

Remove the bottom thrust washer from the stem.
For SW8, 10SM9 and 20SM9 valves, remove the stem
collar by unscrewing it clockwise. For stems with a
larger stem tip, remove the packing washer and packing
from the stem. FIRST THRUST WASHER

8. Clean thrust washers and all surfaces which mate with

thrust washers with a clean cloth. Apply non-hardening
lubricant (Jet-Lube SS-301 or similar) lightly to both
faces of the thrust washer and the sleeve
threads.

9. For stems with a larger stem tip, place the bottom

washer, packing and packing washer on the stem
(remove the bottom washer from from the old stem if
the stem is being replaced). For SW8, 10SM9
and 20SM9 valves, place the stem collar on the stem
by threading it counter-clockwise. Place first thrust
washer on the stem and slide stem into stem sleeve. STEM
Place second thrust washer on the stem sleeve. Replace
hex nut lightly against the upper thrust washer and
thread the stem assembly fully into the packing
gland. Screw the packing gland into the body and tighten Figure 1: Two-Piece Non-rotating Stem Assembly (Exploded)

Parker Autoclave Engineers

Instrumentation Products Division
3 Erie, PA USA
www.autoclave.com | Cat. 02-0024ME
the upper and lower stem together by driving it out with a
rigid small diameter rod and pulling it out with a Section 4.0
pair of pliers. Remove the packing washer and packing Seat Replacement
from the stem. If a new lower stem is required, remove
the housing andcone ring from the old stem and place the (see Fig. 3)
cone ring and housing over the new lower stem. Place the 1. Relieve all pressure from the valve and remove it from
bottom washer, packing and packing washer on the stem. the system. Turn the valve stem to the full open position.
Insert the lower stem into the upper stem so that the
groove pin holes line up. Drive the groove pin into the 2. While holding the body secure, unscrew the seat retainer.
hole until it is flush with the outside diameter of the upper
stem. 3. Remove old seat and replace if necessary.

11. Lubricate stem sleeve threads with Jet-Lube SS-301 or 4. Apply silicone grease or similar lubricant to sealing
similar lubricant. Thread the stem sleeve all the way into surfaces of seat. Apply Jet-Lube SS-301 or similar
the packing gland or the insert so that the stem is in lubricant to the seat retainer threads.
the full open position. While holding the housing in a vice,
5. Replace seat and seat retainer. Make certain that the seat
torque the packing gland to the value in the Installation
stays flat against the valve body. Tighten seat retainer to
Summary Chart and tighten the locknut. Apply silicone
the torque specified in the Installation Summary Chart.
grease or similar lubricant to the sealing surfaces of the
cone rings. Apply Jet-Lube SS-301 or similar lubricant
to the threads. Screw the housing into the valve body and
torque the housing to the value in the Installation Sum
HEX SOCKET
mary Chart. Replace the housing locking device. SET SCREW

Rotating Stem HANDLE

12. Remove the handle from the stem. Unthread the stem PACKING GLAND

from the packing gland. Apply Jet-Lube SS-301 or similar

LOCKING DEVICE
lubricant to the threads of the new stem and thread the
new stem all the way into the packing gland. Line the set
screw on the stem up with the flat spot on the stem and
UPPER PACKING
tighten the set screw. With the bottom washer, packing WASHER
PACKING

and packing washer installed in the body, screw in the LOWER PACKING
WASHER
packing gland and torque it to the value in the
STEM
Installation Summary Chart. Reinstall the packing gland
locking device.

BODY

SEAT

ALUMINUM BRONZE SEAT RETAINER

PACKING GLAND POWDER COATED
STAINLESS STEEL
HANDLE
COLD WORKED
TYPE 316 SS BODY

LOCKING DEVICE

NON-ROTATING
STEM

ADJUSTABLE PACKING
BELOW THREADS Figure 3: Valve with Replacement Seat
ANTI-EXTRUSION
BACK-UP RINGS

HIGH PRESSURE
CONED-AND-THREADED
CHOICE OF VEE OR CONNECTIONS
REGULATING STEM TIP
METAL-TO-METAL SEATING

Figure 2: Typical Valve Assembly

Parker Autoclave Engineers

Instrumentation Products Division
4 Erie, PA USA
www.autoclave.com | Cat. 02-0024ME
Section 5.0
POWDER COATED
Service
STAINLESS STEEL
HANDLE

PACKING GLAND
For service contact the Parker Autoclave Engineers Representa-
tive in your area or FAX Parker Autoclave Engineers Support
Services at 1-814-860-5703.
GROOVE PIN
UPPER STEM

LOCKING NUT
Notes:
A PACKING LOCATED OUT
OF TEMPERATURE
HT - (high temperature extended stuffing box option).
ANTI-EXTRUSION
BACK-UP RINGS
LT - (cryogenic extended stuffing box option).
EXTENDED HOUSING
1
SS30 is a registered trademark of Jet-Lube, Inc.
LOWER STEM

LOCKING DEVICE

Section 6.0
Installation Summary Chart
BODY

CONE SEAL

Please see Installation Summary Chart on pages 6 & 7.

Figure 4: Extended Housing Valve Assembly with Two Piece

Pinned Non-Rotating Stem

ANODIZED
ALUMINUM HANDLE
316 PACKING
GLAND
M3.5 x .7
SCREW
STEM LOCKING CLIP

SPACER

COLD WORKED
TYPE 316 SS ADJUSTABLE PACKING
BODY IN FIVE BELOW THREADS
PATTERNS

SPEEDBITE
"W" TUBE
SPEEDBITE
CONNECTION
"W" TUBE METAL-TO-METAL
CONNECTION VEE STEM TIP SEATING

Figure 5: One Piece Rotating Stem

Parker Autoclave Engineers

Instrumentation Products Division
5 Erie, PA USA
www.autoclave.com | Cat. 02-0024ME
Section 4.0
Installation Summary Chart

Valve** Packing Gland Packing Gland Tube Gland Tube Gland Packing P/N Replaceable Replaceable Extended Extended Packing Gland Hex Packing Gland Hex and Lock
Series Hex Size Torque ~ Hex Size Torque Seat Retainer Seat Retainer Housing Housing Size Torque ~ Nut Sizes
TFE TG GY Hex Size Torque Hex Torque (w/ext. housing) (w/ext. housing)
in. (mm) ft-lbs (Nm) in. (mm) ft-lbs (Nm) (qty.) (qty.) (qty.) in. (mm) ft-lbs (Nm) in. (mm) ft-lbs (Nm) in. (mm) ft-lbs (Nm) in. (mm)
MV1/
MV2 1/2 (12.7) 12.5 (17.1) .393 (10.0) * - - P-0825 (1) - - - - - - - -
MVE1/
MVE2 1/2 (12.7) 12.5 (17.13) 3/8 (7.57) * - - P-0825 (1) - - - - - - - -
10V2/
SW2 1/2 (12.7) 12 (16.3) 1/2 (12.7) * - P-0492 (2) P-0825 (2) P-8926 (1) 1/2 (12.7) 10 (13.6) 5/8 (15.9) 10 (13.6) 1/2 (12.7) 12 (16.3) 7/32 (5.56)
10 V4 13/16 (20.6) 40 (54.2) 13/16 (20.6) * - P-0128 (1) P-0466 (1) P-8932 (1) 1 (25.4) 15 (20.4) 15/16 (23.8) 20 (27.2) 13/16 (20.6) 40 (54.4) 7/32 (5.56)
10 V6 13/16 (20.6) 40 (54.2) 13/16 (20.6) * - P-0128 (1) P-0466 (1) P-8932 (1) 1 (25.4) 10 (13.6) 15/16 (23.8) 15 (20.4) 13/16 (20.6) 40 (54.4) 7/32 (5.56)
10 V8 13/16 (20.6) 30 (40.7) 15/16 (23.8) * - P-0686 (1) P-1211 (1) P-8927 (1) 1 (25.4) 15 (20.4) 15/16 (23.8) 20 (27.2) 13/16 (20.6) 30 (47.6) 7/32 (5.56)
SW4 5/8 (15.9) 30 (40.7) 5/8 (15.9) * - P-0685 (2) P-1691 (2) P-8928 (1) 3/4 (19.1) 20 (27.2) 13/16 (20.6) 35 (47.6) 1-13/16 (30.2) 25 (34.0) 7.32 (5.56)
SW6 5/8 (15.9) 40 (54.2) 3/4 (19.1) * - P-0686 (2) P-1211 (2) P-8927 (1) 3/4 (19.1) 15 (20.4) 13/16 (20.6) 35 (47.6) 1-13/16 (30.2) 30 (40.8) 7/32 (5.56)
SW8 13/16 (20.6) 50 (67.8) 15/16 (23.8) * - P-0677 (2) P-0776 (2) P-8929 (1) 1 (25.4) 50 (68.0) 1 (25.4) 35 (47.6) 1-1/2 (38.1) 20 (27.2) 5/16 (7.94)
15P4 5/8 (15.9) 40 (54.2) - - P-0685 (2) P-1691 (2) P-8928 (1) - - - - - - 7/32 (5.56)
15P6 5/8 (15.9) 40 (54.2) - - P-0685 (2) P-1691 (2) P-8928 (1) - - - - - - 7/32 (5.56)
15P8 13/16 (20.6) 80 (108) - - P-0677 (2) P-0776 (2) P-8929 (1 set) - - - - - - 5/16 (7.94)

6
10P12 15/16 (23.8) + - - P-1758 (2) P-1759 (2) P-8930 (1 set) - - - - -
- 3/8 (9.53)
10P16 1-3/8 (34.9) 20 (27.2) - - P-1733 (2) P-1775 (4) P-8931 (1 set) - - - - - - 1/2 (12.7)
20SM4 5/8 (15.9) 40 (54.2) 1/2 (12.7) 20 (27.1) P-0685 (2) P-1691 (2) P-8928 (1) 3/4 (19.1) 35 (47.6) 13/16 (20.6) 35 (47.6) 1-13/16 (30.2) 25 (34.0) 7/32 (5.56)
20SM6 5/8 (15.9) 40 (54.2) 5/8 (15.9) 30 (40.7) P-0685 (2) P-1691 (2) P-8928 (1) 3/4 (19.1) 35 (47.6) 13/16 (20.6) 35 (47.6) 1-13/16 (30.2) 25 (34.0) 7/32 (5.56)
20SM9 13/16 (20.6) 80 (108) 15/16 (23.8) 55 (74.6) P-0677 (2) P-0776 (2) P-8929 (1 set) 1 (25.4) 125 (170) 1 (25.4) 100 (136) 1-1/2 (38.1) 100 (136) 5/16 (7.94)
20SM12 15/16 (23.8) + 1-3/16 (30.2) 90 (122) P-1758 (2) P-1759 (2) P-8930 (1 set) 1-3/8 (34.9) 140 (190) 1-3/8 (34.9) 120 (163.2) 1-3/4 (44.5) + 3/8 (9.53)
20SM16 1-3/8 (34.9) ++ 1-3/8 (34.9) 150 (203) P-1733 (2) P-1775 (4) P-8931 (1 set) 1-3/4 (44.5) 150 (203) 1-3/4 (44.5) 170 (231.2) 1-3/4 (44.5) ++ 1/2 (12.7)

For the discontinued 20SV and 20SC Series use SM valves

Notes:
** Valve series and connection size in sixteenths of an inch are indicated.
+ Finger tight, then 3/4 turn with wrench (TFE only). 175 ft. - lbs. (238.9) N-m with TG packing. 120 ft.-lbs. (162.7) N-m with GY packing.
++ Finger tight, then 3/4 turn with wrench (TFE only). 325 ft. - lbs. (443.8) N-m with TG packing. 140 ft.-lbs. (189.8) N-m with GY packing.
~ Unless otherwise noted, torque values are for TFE packing. For TG packing add 10% and for GY packing add 25% to these values.

Erie, PA USA
* Torque wrench not required for AE Speedbite tube connections. Tighten gland until sleeve begins to grip tubing the 1-1/4 turns.

Parker Autoclave Engineers

Instrumentation Products Division

www.autoclave.com | Cat. 02-0024ME

Installation Summary Chart - con't

Valve** Packing Gland Packing Gland Tube Gland Tube Gland Packing P/N Replaceable Replaceable Extended Extended Packing Gland Hex Packing Gland Hex and Lock
Series Hex Size Torque ~ Hex Size Torque ^^ Seat Retainer Seat Retainer Housing Housing Size Torque ~ Nut Sizes
TFE TG GY Hex Size Torque Hex Torque (w/ext. housing) (w/ext. housing)
in. (mm) ft-lbs (Nm) in. (mm) ft-lbs (Nm) (qty.) (qty.) (qty.) in. (mm) ft-lbs (Nm) in. (mm) ft-lbs (Nm) in. (mm) ft-lbs (Nm) in. (mm)
30VM4 13/16 (20.6) 60 (81.3) 5/8 (15.9) 15 (20.3) P-0128 (1) P-0466 (1) P-8932 (1) 3/4 (19.1) 35 (47.6) 15/16 (23.8) 50 (67.8) 13/16 (20.6) 60 (81.3) 7/32 (5.56)
30VM6 13/16 (20.6) 60 (81.3) 13/16 (20.6) 25 (33.9) P-0128 (1) P-0466 (1) P-8932 (1) 1 (25.4) 35 (47.6) 15/16 (23.8) 50 (67.8) 13/16 (20.6) 60 (81.3) 7/32 (5.56)
30VM9 13/16 (20.6) 60 (81.3) 1-3/16 (30.2) 55 (74.6) P-0128 (1) P-0466 (1) P-8932 (1) 1-3/8 (34.9) 35 (47.6) 15/16 (23.8) 50 (67.8) 13/16 (20.6) 60 (81.3) 7/32 (5.56)
60VM4 13/16 (20.6) 60 (81.3) 5/8 (15.9) 25 (33.9) P-0864 P-8713 (2) P-8933 (1) 13/16 (20.6) 45 (61.2) 15/16 (23.8) 65 (88.1) 13/16 (20.6) 60 (81.3) 7.32 (5.56)
(1 set)
60VM6 13/16 (20.6) 60 (81.3) 13/16 (20.6) 50 (67.8) P-0864 P-8713 (2) P-8933 (1) 1 (25.4) 45 (61.2) 15/16 (23.8) 65 (88.1) 13/16 (20.6) 60 (81.3) 7/32 (5.56)
(1 set)
60VM9 13/16 (20.6) 60 (81.3) 1-3/16 (30.2) 110 (149.2) P-0864 P-8713 (2) P-8933 (1) 1-3/8 (34.9) 45 (61.2) 15/16 (23.8) 65 (88.1) 13/16 (20.6) 60 (81.3) 7/32 (5.56)
(1 set)
10VRMM2 5/8 (15.9) 20^ (27.1) 1/2 (12.7) * P-1654 (1) P-0467 (1) P-8934 (1) 5/8 (15.9) 25 (34.0) 5/8 (15.9) 15 (20.5) 5/8 (15.9) 20 (27.3) N/A
30VRMM4 13/16 (20.6) 50^ (67.8) 5/8 (15.9) 15 (20.3) P-1654 (1) P-0467 (1) P-8934 (1) 13/16 (20.6) 50 (67.8) 15/16 (23.8) 50 (67.8) 13/16 (20.6) 50 (67.8) N/A
60VRMM4 13/16 (20.6) 50^ (67.8) 5/8 (15.9) 25 (33.9) P-0864 (1) P-8713 (2) P-8933 (1) 15/16 (23.8) 35 (47.6) N/A N/A N/A N/A 7/32 (5.56)
(1 set)
60VRMM4 13/16 (20.6) 50^ (67.8) 13/16 (20.6) 50 (67.8) P-0864 (1) P-8713 (2) P-8933 (1) 1-3/8 (34.9) 35 (47.6) 15/16 (23.8) 55 (75.1) 13/16 (20.6) 75 (102.4) 7/32 (5.56)
(1 set)

7
100VM5 15/16 (23.8) 60 (81.3) 3/4 (19.1) 70 (95.0) 90368 (1) N/A 70 (95.2) NA N/A NA N/A 15/16 (7.94)
90369 (2)
100VM4 15/16 (23.8) 60 (81.3) 3/4 (19.1) 70 (95.0) 90368 (1) 1 (25.4) 70 (95.2) NA N/A NA N/A 15/16 (7.94)
90369 (2)
100VM6 15/16 (23.8) 60 (81.3) 3/4 (19.1) 70 (95.0) 90368 (1) 1 (25.4) 70 (95.2) NA N/A NA N/A 15/16 (7.94)
90369 (2)

Notes:
** Valve series and connection size in sixteenths of an inch are indicated.
^ Zero position of barrel or thimble must be changed.
^^ 60VM and 60VRMM packing is nylon (P-0829), leather (P-0803) and nylon (P-0829).
+ Finger tight, then 3/4 turn with wrench (TFE only). 175 ft. - lbs. (238.9) N-m with TG packing. 120 ft.-lbs. (162.7) N-m with GY packing.
++ Finger tight, then 3/4 turn with wrench (TFE only). 325 ft. - lbs. (443.8) N-m with TG packing. 140 ft.-lbs. (189.8) N-m with GY packing.
~ Unless otherwise noted, torque values are for TFE packing. For TG packing add 10% and for GY packing add 25% to these values.
* Torque wrench not required for AE Speedbite tube connections. Tighten gland until sleeve begins to grip tubing the 1-1/4 turns.
N/A Not Applicable

Erie, PA USA
Parker Autoclave Engineers
Instrumentation Products Division

www.autoclave.com | Cat. 02-0024ME

WARNING
FAILURE OR IMPROPER SELECTION OR IMPROPER USE OF THE PRODUCTS DESCRIBED HEREIN OR RELATED ITEMS CAN CAUSE DEATH,
PERSONAL INJURY AND PROPERTY DAMAGE.

This document and other information from Parker Hannifin Corporation, its subsidiaries and authorized distributors provide product or system options for further investigation by
users having technical expertise. The user, through its own analysis and testing, is solely responsible for making the final selection of the system and components and assuring that
all performance, endurance, maintenance, safety and warning requirements of the application are met. The user must analyze all aspects of the application, follow applicable
industry standards, and follow the information concerning the product in the current product catalog and in any other materials provided from Parker or its subsidiaries or
authorized distributors. To the extent that Parker or its subsidiaries or authorized distributors provide component or system options based upon data or specifications provided by
the user, the user is responsible for determining that such data and specifications are suitable and sufficient for all applications and reasonably foreseeable users of the components
or systems.

2013 Parker Hannifin Corporation | Autoclave Engineers is a registered trademark of the Parker Hannifin Corporation 02-0024ME January 2013

Instrumentation Products Division Parker Hannifin Manufacturing Ltd.

Autoclave Engineers Operation Instrumentation Products Division, Europe
8325 Hessinger Drive Industrial Estate Whitemill
Erie, Pennsylvania 16509-4679 USA Wexford, Republic of Ireland
PH: 814-860-5700 FAX: 814-860-5811 PH: 353 53 914 1566
www.autoclave.com FAX: 353 53 914 1582
ISO-9001 Certified
! AVERTISSEMENT !
LE DFAUT DE SLECTION, LA SLECTION INCORRECTE OU UNE MAUVAISE UTILISATION DES PRODUITS OU DES SYSTMES DCRITS ICI OU DES PRODUITS RATTACHS
PEUVENT ENTRANER LA MORT, DES BLESSURES CORPORELLES OU DES DOMMAGES MATERIELS.
Le prsent document (ainsi que tout renseignement provenant de Snap-tite Inc., des ses filiales et distributeurs autoriss) offrent le choix de produits et/ou systmes
destins permettre des utilisateurs techniquement comptents deffectuer des recherches supplmentaires. Il est important deffectuer une analyse exhaustive de lapplication
et dtudier les renseignements relatifs au produit ou systme dans le catalogue le plus rcent. En raison de la grande varit de conditions dexploitation et dapplication de ces
produits, lutilisateur est, suite ses analyses et essais raliss par ses soins, seul responsable de son choix de produits et de systmes et de lassurance que toutes les condi-
tions de fonctionnement , de scurit et davertissement ont t satisfaites.
Les produits dcrits ici, y compris caractristiques, spcifications, dessins, disponibilit, prix, sans aucune limitation, sont susceptibles dtre modifis par Snap-tite Inc; et
ses filiales tout moment sans avis pralable.

Industrial Estate
Whitemill - Wexford 8325 Hessinger Drive
Republic of Ireland Erie, Pennsylvania 16509 USA
Ph: 353 53 914 1566 Fax: 353 53 914 1582 Tl: +1 814-860-5700 Fax: +1 814-860-5811
e-mail: ste_sales@snap-tite.com e-mail: ae_sales@snap-tite.com
www.snap-tite.com www.autoclave.com

08-1090MF-1010

Assy Vol I
No ratings yet
Assy Vol I
4 pages
TRSV SP-ENH 5.5 20 Vamtop - 4.562in Sealbore MN 102951596
No ratings yet
TRSV SP-ENH 5.5 20 Vamtop - 4.562in Sealbore MN 102951596
3 pages
Model "J" & "L" Production Packers (R22)
50% (2)
Model "J" & "L" Production Packers (R22)
9 pages
PS64692 PDF
No ratings yet
PS64692 PDF
2 pages
NS-1-180. Documentation Package
No ratings yet
NS-1-180. Documentation Package
6 pages
American MT, AMT, AMMT
No ratings yet
American MT, AMT, AMMT
1 page
WS412
No ratings yet
WS412
7 pages
PS64666
No ratings yet
PS64666
2 pages
Well Data Sheet for Quick Connectors
No ratings yet
Well Data Sheet for Quick Connectors
1 page
Tapon Recuperable NPR
No ratings yet
Tapon Recuperable NPR
34 pages
ROC Tool For Dummies
No ratings yet
ROC Tool For Dummies
1 page
User Manual SJL Elevator
100% (1)
User Manual SJL Elevator
106 pages
Magnum Composite Plug Catalog 06-30-10 PDF
No ratings yet
Magnum Composite Plug Catalog 06-30-10 PDF
21 pages
VMStar Catalog
No ratings yet
VMStar Catalog
92 pages
Guiberson Packer Cup Brochure 2020
No ratings yet
Guiberson Packer Cup Brochure 2020
7 pages
Chancellor Line Hangers
No ratings yet
Chancellor Line Hangers
53 pages
Rubber Products Manufacturer & Exporter
No ratings yet
Rubber Products Manufacturer & Exporter
8 pages
FS Casing Tubing Seal
No ratings yet
FS Casing Tubing Seal
4 pages
Split Flow Dart for PBL Tool Optimization
No ratings yet
Split Flow Dart for PBL Tool Optimization
3 pages
Engineering Component Specifications
No ratings yet
Engineering Component Specifications
1 page
VAM TOP Rev7
No ratings yet
VAM TOP Rev7
8 pages
Blanking Dimensions: Connection Diameter Nominal Weigth Wall Thickness API Drift
No ratings yet
Blanking Dimensions: Connection Diameter Nominal Weigth Wall Thickness API Drift
1 page
6.625 X 2.875 DLH PACKER (17-24) 935-6625-103 Rev B
No ratings yet
6.625 X 2.875 DLH PACKER (17-24) 935-6625-103 Rev B
7 pages
EMAR 01 Rev01 FINAL
No ratings yet
EMAR 01 Rev01 FINAL
12 pages
Tech Info - RTS-8
No ratings yet
Tech Info - RTS-8
2 pages
TenarisHydril 3SB RunningGuidelines
100% (1)
TenarisHydril 3SB RunningGuidelines
10 pages
4in Tree.a
No ratings yet
4in Tree.a
1 page
9-1/2in CDR : Fishing Diagram and Mechanical Specifications
No ratings yet
9-1/2in CDR : Fishing Diagram and Mechanical Specifications
10 pages
Side Entry Subs (Welded) - Oil Rig Drill String Accessories - Downhole Oil Tools, Inc
No ratings yet
Side Entry Subs (Welded) - Oil Rig Drill String Accessories - Downhole Oil Tools, Inc
2 pages
Oil Field: Main Catalogue
100% (1)
Oil Field: Main Catalogue
176 pages
02 TL-SH32-0001 Hydraulic Stage Cementing Tool
No ratings yet
02 TL-SH32-0001 Hydraulic Stage Cementing Tool
7 pages
Casing Properties
No ratings yet
Casing Properties
1 page
SCSSV Reuse Process at NJG-A Yard
No ratings yet
SCSSV Reuse Process at NJG-A Yard
13 pages
VAsuperior ENG
No ratings yet
VAsuperior ENG
24 pages
Type 680 Hydraulic Stage Collar
No ratings yet
Type 680 Hydraulic Stage Collar
6 pages
LYNER
No ratings yet
LYNER
1 page
VAMCatalog 2011
No ratings yet
VAMCatalog 2011
116 pages
Descriptio: Model GXA Sliding Sleeve
No ratings yet
Descriptio: Model GXA Sliding Sleeve
4 pages
Retrievable Bridge Plug 4
No ratings yet
Retrievable Bridge Plug 4
1 page
International Standards For Tubing - PetroWiki PDF
No ratings yet
International Standards For Tubing - PetroWiki PDF
6 pages
FOX Running Manual: Legal Notice
No ratings yet
FOX Running Manual: Legal Notice
14 pages
Composite Bridge Plug Technical Datasheet
No ratings yet
Composite Bridge Plug Technical Datasheet
3 pages
BTB Better Than Buttress
No ratings yet
BTB Better Than Buttress
4 pages
Logging Plug
No ratings yet
Logging Plug
2 pages
Limar Limar: Motorhead Assembly (Mha)
No ratings yet
Limar Limar: Motorhead Assembly (Mha)
2 pages
Model NEFU-2 Non-Elastomeric Sliding Sleeve: Descriptio
No ratings yet
Model NEFU-2 Non-Elastomeric Sliding Sleeve: Descriptio
6 pages
TSH-IP-00.0021 - 01 Full Thread Length Inspection
No ratings yet
TSH-IP-00.0021 - 01 Full Thread Length Inspection
4 pages
Packer Comparison Chart
No ratings yet
Packer Comparison Chart
1 page
WPCE Horizontal Tree Isolation Plugs Flyer
No ratings yet
WPCE Horizontal Tree Isolation Plugs Flyer
1 page
Centralizer System
No ratings yet
Centralizer System
8 pages
Premium Thread License Reference Guide
No ratings yet
Premium Thread License Reference Guide
1 page
Aramco Approved Bit Types InTouch 6904075 - v2 - 11 Oct 2016 - 6904075 - 01
No ratings yet
Aramco Approved Bit Types InTouch 6904075 - v2 - 11 Oct 2016 - 6904075 - 01
6 pages
New Vam Brochure
No ratings yet
New Vam Brochure
7 pages
Iv-0370-21 Oversize Guie Ag38183
No ratings yet
Iv-0370-21 Oversize Guie Ag38183
1 page
Inflatable Bridge Plugs Guide
No ratings yet
Inflatable Bridge Plugs Guide
4 pages
Pac Vam Eis Connection
No ratings yet
Pac Vam Eis Connection
2 pages
08-1090MF-1010 Full Catalog 02-2013
No ratings yet
08-1090MF-1010 Full Catalog 02-2013
416 pages
Fluid Components Full Catalog
No ratings yet
Fluid Components Full Catalog
464 pages
Parker Autoclave Engineers: Fluid Componets Product Catalog Feb. 2016
No ratings yet
Parker Autoclave Engineers: Fluid Componets Product Catalog Feb. 2016
370 pages
FluidComponentsFullCatalog PDF
No ratings yet
FluidComponentsFullCatalog PDF
502 pages
LNG Info
No ratings yet
LNG Info
11 pages
Nexans Kukdong
No ratings yet
Nexans Kukdong
108 pages
VW Passat B8 Owner's Manual - 20170726131212
50% (20)
VW Passat B8 Owner's Manual - 20170726131212
228 pages
Draka Power and Instrumentation
100% (1)
Draka Power and Instrumentation
33 pages
CAN Bus Cable (2Tr)
No ratings yet
CAN Bus Cable (2Tr)
2 pages
11process Control Fundamentals PDF
No ratings yet
11process Control Fundamentals PDF
59 pages
Pipe Schedule Chart
No ratings yet
Pipe Schedule Chart
1 page
Composite 2D Shapes PDF
No ratings yet
Composite 2D Shapes PDF
4 pages
Offshore Cable Solutions
No ratings yet
Offshore Cable Solutions
96 pages
JS Nek606
No ratings yet
JS Nek606
40 pages
F79e6ab6 8
No ratings yet
F79e6ab6 8
116 pages
Offshore Magazine May
No ratings yet
Offshore Magazine May
94 pages
Ulllted States Patent (10) Patent N0.: US 7,525,005 B2
No ratings yet
Ulllted States Patent (10) Patent N0.: US 7,525,005 B2
7 pages
Ip & Nema
No ratings yet
Ip & Nema
1 page
Flow Meter Selection Criteria
100% (2)
Flow Meter Selection Criteria
62 pages
Heat Trace Calculation
No ratings yet
Heat Trace Calculation
8 pages
ATEX Exam
75% (4)
ATEX Exam
8 pages
Guitar Book 1
No ratings yet
Guitar Book 1
35 pages
Flowmeter Calibration Techniques
100% (1)
Flowmeter Calibration Techniques
8 pages
Jittima Thipsukhum and Montree Wongsri
No ratings yet
Jittima Thipsukhum and Montree Wongsri
10 pages
S38.113-A Thermowell Shell STD
No ratings yet
S38.113-A Thermowell Shell STD
1 page
P&ID Notes
100% (2)
P&ID Notes
17 pages
Cable Tray Manual
No ratings yet
Cable Tray Manual
59 pages
S38.113-A Thermowell Shell STD
No ratings yet
S38.113-A Thermowell Shell STD
1 page
Titanium Welding Guide
No ratings yet
Titanium Welding Guide
4 pages
4016-E61TRS - User Handbook
No ratings yet
4016-E61TRS - User Handbook
48 pages
Flow Diagram of A Stand-Alone HTC Plant (HTC-sep) With Staged Heat Recovery
No ratings yet
Flow Diagram of A Stand-Alone HTC Plant (HTC-sep) With Staged Heat Recovery
1 page
Distinct Motor Differential Protection Patterns and Their
No ratings yet
Distinct Motor Differential Protection Patterns and Their
9 pages
Hardware Design Considerations Using A BLDC Mo: Application Report
No ratings yet
Hardware Design Considerations Using A BLDC Mo: Application Report
9 pages
Cyclic Loading Presentation
No ratings yet
Cyclic Loading Presentation
22 pages
Ecodial How To Quickly Design and Optimize Your LV Electrical Installation Initiative 2007
No ratings yet
Ecodial How To Quickly Design and Optimize Your LV Electrical Installation Initiative 2007
9 pages
Palm Oil EFB Supply Chain Barriers
100% (1)
Palm Oil EFB Supply Chain Barriers
100 pages
Steering Systems
100% (3)
Steering Systems
48 pages
Pedal Operated Water Filtration System (Mobifilt) : Research Article
No ratings yet
Pedal Operated Water Filtration System (Mobifilt) : Research Article
5 pages
Power Factor Correction AC-DC Converter
No ratings yet
Power Factor Correction AC-DC Converter
5 pages
Flow Assurance Training Course-1 Underlined (IOGPT)
100% (9)
Flow Assurance Training Course-1 Underlined (IOGPT)
108 pages
Introduction To Thermal Sand Reclamation
No ratings yet
Introduction To Thermal Sand Reclamation
8 pages
Engine Speed - Timing Sensor - Calibrate (RENR5096)
No ratings yet
Engine Speed - Timing Sensor - Calibrate (RENR5096)
5 pages
Steel: Essential Material Insights
No ratings yet
Steel: Essential Material Insights
1 page
Arduino Geiger Counter Guide
No ratings yet
Arduino Geiger Counter Guide
16 pages
Plastofuel: Converting Plastic Waste to Fuel
No ratings yet
Plastofuel: Converting Plastic Waste to Fuel
6 pages
Hw7 Solutions
No ratings yet
Hw7 Solutions
5 pages
Shell Marine Lubricants Guide
No ratings yet
Shell Marine Lubricants Guide
60 pages
Trackmaster Ohc
No ratings yet
Trackmaster Ohc
5 pages
Vertical Stirred Mill Overview
No ratings yet
Vertical Stirred Mill Overview
29 pages
Pages From FAQ P
No ratings yet
Pages From FAQ P
3 pages
Photovoltaic Module Install Guide
No ratings yet
Photovoltaic Module Install Guide
22 pages
Case 580b CK
No ratings yet
Case 580b CK
649 pages
SIRIUS Low Voltage Controls Datasheet
No ratings yet
SIRIUS Low Voltage Controls Datasheet
468 pages
Energy Conversion and Management: Shuo Liu, Xiaohua Liu, Hyusan Jang, Myoung-Souk Yeo
No ratings yet
Energy Conversion and Management: Shuo Liu, Xiaohua Liu, Hyusan Jang, Myoung-Souk Yeo
14 pages
CRADA Telluride Final Report v7 Public
No ratings yet
CRADA Telluride Final Report v7 Public
34 pages
Construction of Syn Generator
50% (2)
Construction of Syn Generator
9 pages
Wankel MQP Final Report
No ratings yet
Wankel MQP Final Report
28 pages
Smart Grid Communication Using Open Smart Grid Protocol
No ratings yet
Smart Grid Communication Using Open Smart Grid Protocol
31 pages