Dresser-Rand

Corporate Headquarters
West8 Tower, Suite 1000
10205 Westheimer Road
Houston, Texas 77042
Tel: (Int'l +1) 713-354-6100
Fax: (Int'l +1) 713-354-6110
E-mail: info@dresser-rand.com

For more information e-mail us at

training@dresser-rand.com

For current information about D-R

product training, visit:
www.dresser-rand.com.

TRAINING REGISTRARS

Reciprocating Compressors and

Integral Gas Engines
Dresser-Rand
Product Training
100 Chemung Street
Painted Post, NY 14870
Phone: (Int'l +1) 607-937-2303
Fax: (Int'l +1) 607-937-2047

Turbomachinery/Steam Turbine Products

Dresser-Rand
Product Training
Paul Clark Drive
Olean, NY 14760-0560
Phone: (Int'l +1) 716-375-3975
Fax: (Int'l +1) 716-375-3979

Control Systems
Dresser-Rand
Product Training
1202 W. Sam Houston Pkwy. N.
Houston, TX 77043
Phone: (Int'l +1) 713-365-2645
Fax: (Int'l +1) 713-365-2660

Dresser-Rand S.A.
Training Administrator
31, Boulevard Winston Churchill
76080 Le Havre Cedex 7013 France
Phone: (Int'l +33) 2-35-25-5296
Fax: (Int'l +33) 2-35-25-5887
E-mail: pdiesnis@dresser-rand.com

Dresser-Rand Asia Pacific Sdn Bhd

Unit 9-4, 9th Floor, Bangunan Malaysian Re
17 Lorong Dungun, Damansara Heights
50490 Kuala Lumpur, Malaysia
Phone: (Int'l+60) 3-2093-6633
Fax: (Int'l+60) 3-2093-2622
E-mail: trainingAP@dresser-rand.com

Dresser-Rand Company Ltd.

85 Papyrus Road
Peterborough, Cambridgeshire
PE4 5BH, United Kingdom
Tel: (Int'l +44) 1733-292215
Fax: (Int'l +44) 1733-292234
E-mail: dgoodwin@dresser-rand.com

This document comprises a general overview of the Dresser-Rand products or services described herein. It is solely for informational
purposes, does not represent a warranty or guarantee of the information contained herein, and is not to be construed as an offer to
sell or a solicitation to buy. Contact Dresser-Rand for detailed design and engineering information suitable to your specific applica-
©2009 Dresser-Rand. Printed in U.S.A. tions. Dresser-Rand reserves the right to modify its products or services and related information at any time without prior notice.
Form 85187-10
Reciprocating compressors
Integral engines

Steam Turbines
Turbomachinery

Controls
 2010 Product Training Catalog
Dresser-Rand product training programs are designed for a wide range of client operations, maintenance, and
engineering personnel. Our full-time instructors and field service engineers use “building block” and “team teaching”
techniques to go from equipment fundamentals for the new employee, all the way to complete machinery overhauls
and design concepts for more experienced attendees. Programs and training manuals are presented in English with
translations into other languages upon request.
CUSTOM PRODUCT TRAINING
Please contact us to request a custom training proposal. We can tailor the program to meet your desired class dates, number of
students, student mix (operators, mechanics, engineers, etc.), student experience level, machine-specific technical information,
overall job scope, and any special transportation/shipping requirements. You select the location that best suits your training needs
– your plant, a regional location, the Dresser-Rand factory, or a D-R service center.

HANDS-ON TRAINING
Our portable training units and workstations are full-size D-R equipment that can be transported directly to your facility to reduce
overall training costs and associated trainee travel expenses. (This is available in the United States and Canada only.) This
practical approach to learning is the method of instruction preferred by maintenance personnel.

WEB-BASED TRAINING (WBT) COURSES

Dresser-Rand offers OEM-developed WBT courses covering operation and maintenance of reciprocating compressors, steam
turbines and turbomachinery. These courses are designed for the intermediate to advanced level student and include many learning
interactivities that will enhance knowledge retention. Designed by our experienced factory training personnel and approved by in-house
subject matter experts, these courses provide an excellent means to quickly train your operators and mechanics in established Dresser-
Rand “best practices.”

We have established a business relationship with Coastal Training Technologies Corp. Coastal is recognized
as a global leader in flexible learning solutions and will deliver the Dresser-Rand WBT courses in their
award-winning ClarityNet HD® eLearning format. All courses will be AICC- and SCORM-certified—enabling
integration with a variety of learning management systems. For more information on Coastal and their
more than 450 industrial skills training titles, visit www.coastalskills.com.

SHORT COURSES
Dresser-Rand offers several one-day short courses covering topics selected from our longer factory programs. Related courses are
bundled and held in succession, giving students the opportunity to attend one or all of the programs scheduled for that location. These
courses are offered upon request; contact one of the training registrars listed on the back cover of this brochure.

OPEN REGISTRATION AND CLIENT-HOSTED REGIONAL CLASSES

In addition to United States-based factory, regional, and machine-specific on-site training, Dresser-Rand can hold open registration
courses hosted by clients in heavily equipment-populated areas. Courses can be hosted at a client's site with open registration for
other D-R clients within that area. Dresser-Rand supplies all training materials such as manuals, hands-on equipment, and tools.
All advertising and registrations are the responsibility of Dresser-Rand.
Table of Contents

Pull-out
Schedule.........................Inside Front / Back Cover
Reciprocating Compressors
and Integral Gas
Engine Courses................................................2
Steam Turbine
Courses..............................................................7
Turbomachinery
Product Courses..............................................9
Additional
Programs........................................................11

Travel and Registrar

Information.....................................Back Flap
Reciprocating Compressors & Integral Engines

INSTRUCTOR-LED RECIP TRAINING COURSES

FOUR-DAY TO ONE WEEK COURSES

RECIPROCATING COMPRESSOR SCHOOL (RCS-105) HIGH-SPEED (GAS FIELD) RECIPROCATING COMPRESSOR

This one-week classroom program for process reciprocating HANDS-ON (HRL-215)
compressors covers a wide range of maintenance and operational In this four-day course, students apply what they learned in D-R’s
concerns related to frame components of all D-R process High-Speed Reciprocating Compressor School through hands-
reciprocating compressors (previous Ingersoll-Rand – HHE/ on training. Students participate in the disassembly, evaluation
ESH/HSE, and previous Worthington – BDC). Topics include: and reassembly of a variety of machine components, including a
journal bearings; compressor cylinders, pistons, rods and rings; compressor frame, compressor valves and compressor cylinders. They
packing/oil wiper rings; compressor valves; capacity control also receive instruction in proper use of precision tools used in the
devices; and lubrication and cooling systems. Also included are field.
discussions on compressor cylinder theory, valve failure analysis, Price: $2,520 USD
compressor installation and general compressor maintenance and Prerequisite: High-Speed Reciprocating Compressor School (HRS-105)
troubleshooting. or equivalent, as determined by D-R Reciprocating Products Training
Price: $2,350 USD Department.
RECIPROCATING COMPRESSOR LAB (RCL-215)
This one-week, hands-on program requires the students to INTEGRAL ENGINE SCHOOL (IES-105)
disassemble, evaluate, repair and reassemble many compressor This one-week classroom program covers a wide range of important
components via structured workstations. This program reinforces operational characteristics and maintenance procedures specific to
many of the maintenance concepts and procedures learned D-R two-stroke cycle (formerly Dresser Clark) and four-stroke
during Reciprocating Compressor School. Each student is cycle (formerly Ingersoll-Rand) integral gas engines. This program
required to exhibit competence in a variety of knowledge, skill concentrates on the power end and includes the following topics: two-
and performance areas. Students are afforded the opportunity stroke cycle and four-stroke cycle theory; assembly and maintenance
to work on the following: two-throw HHE-style frame and running of power cylinder liners; power pistons and rings; ignition systems and
gear; non-lube cylinders (split and solid rider bands); a variety of spark plug maintenance; lubricants and lubrication systems; cooling
valve rebuilding/evaluation workstations; several capacity control systems; fuels and fuel systems; power cylinder balancing; engine
devices (plug, port and clearance pocket unloaders); piston nut timing; journal bearings; valve train systems; emission control systems;
tightening; piston rod run-out and rod drop indicator; high-pressure engine installation; alignment checks; and general engine maintenance
water-cooled packing; and connecting rod bolt stretch. Students and troubleshooting.
are also required to install a variety of valve covers, evaluate an Price: $2,350
oil pump assembly, and adjust crosshead shoes. Throughout the
week, instructors focus on proper use of tools and measuring INTEGRAL ENGINE LAB (IEL-215)
devices that include torque wrenches, micrometers, web deflection This one-week hands-on program requires students to disassemble,
indicators, bolt-stretch micrometers and piston rod run-out evaluate and reassemble many gas engine components specific to the
indicators. power end. Both two-stroke cycle (TCV/TLA/HBA) and four-stroke cycle
Price: $2,520 USD (KVG/KVS) engine components are incorporated into the program.
Prerequisite: Reciprocating Compressor School (RCS-105) The students are given the opportunity to perform the following tasks:
foundation bolt torquing; Ingersoll-Rand two-piece and Clark three-
piece piston assembly; main bearing assembly; bearing crush; power
HIGH-SPEED (GAS FIELD) RECIPROCATING COMPRESSOR piston and rod removal; liner bore measurement and evaluation;
SCHOOL (HRS-105) piston ring clearance measurements; camshaft timing; oil pump
Geared toward operators, mechanics, technicians and rotating maintenance; shimmable connecting rod bearing assembly; crankshaft
equipment engineers, this four-day, knowledge-based course seal maintenance; and web deflection measurements. A full-size
offers a good understanding of the physical, operational and training model is used for the students to learn proper maintenance
maintenance aspects of the various high-speed separable—gas techniques. Several classroom sessions are included to reinforce the
field—compressors manufactured by D-R. These include the concepts and procedures practiced in the hands-on sessions.
HOS/BOS and all styles of the VIP line. Other separable D-R Price: $2,520 USD
compressor models are also referenced. Topics include: basic
compressor operation and applications; principles of compression WIRE ALIGNMENT SCHOOL (WAS-245)
and performance data; basic process gas flow; capacity control; This one-week classroom and hands-on certification program teaches
frame and component description; cylinder and component principles and fundamental procedures of wire alignment. Specific
description (conventional and VIP design); cylinder and frame requirements for successful completion include evaluation and
lubrication systems; compressor valve descriptions, operation and approval of various frame and cylinder examples, and actual finished
troubleshooting; and compressor maintenance. wires. A six-throw frame, a barrel and steel billet-type cylinders are
Price: $2,350 USD used for hands-on certification. [A fabricated four-cycle gas engine
This course is a prerequisite for High-Speed Reciprocating cam carrier is available for additional (optional) certification for owners/
Compressor Hands-on (HRL-215). operators of Ingersoll-Rand-type KVT/KVR gas engines.]
Price: $2,520 USD

2
 Reciprocating Compressors & Integral Engines

WEB-BASED RECIP TRAINING COURSES

LEARN AT YOUR OWN PACE
OPERATION AND MAJOR COMPONENTS IDENTIFICATION FRAME LUBRICATION SYSTEM (RWB006)
(RWB001) Level: Intermediate Focus: Operations/ Maintenance
Level: Basic Focus: Operations/Maintenance This course is designed to provide the student with a complete
This entry-level course is designed to give the student a understanding of the frame lubrication system on a common, process-
fundamental understanding of how a reciprocating compressor type reciprocating compressor. This intermediate level course explains
operates. Through detailed descriptions and interactivities, the the critical properties of lubricants and their additives, and through
student can become familiar in the function and various styles of the use of animation and graphics, details the flow of the lubricant
each component of the compressor cylinder and the frame and as it progresses from the sump to the crosshead. This course offers
running gear. lessons on the importance and function of each system component,
and addresses operational issues related to the lubricating system.
RECIPROCATING COMPRESSOR THEORY (RWB002) Interactivities and periodic review questions are included to enhance
Level: Intermediate Focus: Operations/Maintenance the student’s learning experience.
This intermediate level course has been designed to give the
student an understanding of the basic theory of compression as it RECIPROCATING CRANKSHAFT WEB DEFLECTION (RWB007)
relates to a reciprocating compressor. After a brief understanding Level: Intermediate Focus: Maintenance
of how the compressor operates, students will interact with several This course defines crankshaft web deflections in gas engines and
lessons to help them understand basic gas behaviors, piston reciprocating compressors. Many of the root causes of web deflection
displacement, principles of compression, valve losses, rod loads, are explored and described. A representative list of maximum
and the relationship of pressure, volume and temperature. Other allowable web deflections is provided, along with recommended time
lessons will offer the students information on how clearance intervals between crankshaft inspections. The student is introduced
volume and compression ratios affect capacity and horsepower, to several methods used to measure web deflections and provided
and how multi-staging increases a compressor’s efficiency. Review with an example of a typical recording chart. This course also lists
questions throughout the course will help prepare the student for the major causes of a bent crankshaft and provides methods for
the final examination. determining whether a crankshaft is bent.

PISTON END CLEARANCE (RWB003) PACKING FUNDAMENTALS (RWB008)

Level: Intermediate Focus: Maintenance Level: Intermediate Focus: Maintenance
This comprehensive maintenance-oriented course describes piston This intermediate level maintenance course describes the components
end clearance in a reciprocating compressor cylinder. It also lists that make up a pressure packing assembly and how they work
the effects of improperly adjusted end clearances, addresses end together to form a seal around the piston rod. Detailed lessons,
clearance specifications and tolerances, and provides step-by-step challenging interactivities, and periodic review questions will aid
procedures on how to adjust the clearance. In addition, the course the students in understanding the location and orientation of the
covers both feeler blade and lead-wire methods of gauging and various ring set styles within the packing case. To offer the student
measuring the frame-end and outer-end clearances. an understanding of pressure packing fundamentals, the course will
conclude with a lesson on packing case lubrication and cooling.
PISTON ROD RUNOUT (RWB004)
Level: Intermediate Focus: Maintenance PISTON ROD PACKING RECONDITIONING (RWB009)
This course is designed to help maintenance technicians Level: Intermediate Focus: Maintenance
understand the meaning and effects of piston rod runout on the This course describes the procedures used to properly disassemble
operation of reciprocating compressors. The course also teaches and reassemble a packing case within the compressor or on a
how to measure both vertical and horizontal runout, identify the workbench. The course instructions will explain the correct procedure
factors that influence runout, and correct an out-of-specification for safely removing a packing case. The critical inspection points for
runout condition. The course contains guidelines to help the the components will be identified and used to determine whether
students interpret the runout readings and provides a calculation reconditioning is required. The student will be introduced to the
to aid them in shimming a crosshead to correct a runout that is procedures used to recondition the packing cups and the steps to
out of tolerance. properly reinstall the packing case in a compressor. Because of the
advanced level of this course, it is recommended that the student first
BOLT TORQUE (RWB005) take the Reciprocating Compressor Packing Fundamentals Training
Level: Intermediate Focus: Maintenance Course (RWBT-008).
This comprehensive maintenance-oriented course provides the
student an opportunity to learn the characteristics of threaded WEDGE-TYPE, PACKING RING ASSEMBLY (RWB010)
fasteners, the various methods of properly tensioning them, the Level: Intermediate Focus: Maintenance
variables that influence the tensioning process, and the procedures This course is offered as a higher-level piston rod packing program. It
used to ensure accurate tensioning. The course also contains offers a description of what wedge-type packing rings are, when they
lessons on how certain variables such as lubrication, wrench are required, how they seal, and what type of inert buffer gas system
extensions, damaged threads, tool calibration, and self-locking is needed to make them most effective. The student will be made
fasteners affect the torque applied to the fastener. Although many aware of the location of these rings and will be instructed on their
types of torquing tools will be discussed, the proper use of the proper orientation and installation. Because of the advanced level of
clicker-type torque wrench is emphasized throughout the program. this course, it is recommended that the student first take the packing
fundamentals courses.

3
Reciprocating Compressors & Integral Engines

WEB-BASED RECIP TRAINING COURSES

LEARN AT YOUR OWN PACE
RECIPROCATING COMPRESSOR CYLINDER AND PACKING TWO-CYCLE INTEGRAL GAS ENGINE THEORY (EWB002)
DIVIDER VALVE LUBRICATION SYSTEM (RWB011) Level: Intermediate Focus: Operations/Maintenance
Level: Intermediate Focus: Operations/Maintenance This intermediate-level course has been designed to offer the student
This operations-focused course has been designed to familiarize a comprehensive understanding of the theory of two-cycle gas engines.
operators and maintenance technicians with a typical reciprocating The course begins with a brief review of components specific to
compressor, divider valve type, cylinder and packing lubrication two-cycle engines and how they differ from those used in four-cycle
system. Students will be presented with information regarding the gas engines. This is followed by a basic introduction to combustion
identification, purpose, operation, and adjustment of the various theory and the natural gas laws. After instruction in these important
components that make up this system. Interactivities, animation, concepts the course proceeds to describe the two-stroke cycle process
and review questions strategically placed throughout the course, in detail through the use of P-V and P-T diagrams and animation.
and a step-by-step, interactive demonstration of the divider valve Review questions and interactive activities throughout the course will
operation, will challenge the learner to thoroughly understand the help prepare the student for the final examination.
many aspects of cylinder and packing lubrication and the divider
valve system. FOUR-CYCLE INTEGRAL GAS ENGINE THEORY (EWB003)
Level: Intermediate Focus: Operations /Maintenance
RECIPROCATING COMPRESSOR PUMP-TO-POINT This intermediate-level course has been designed to offer the student
a comprehensive understanding of the theory of four-cycle gas
CYLINDER AND PACKING LUBRICATION SYSTEM engines. The course begins with a brief review of components specific
(RWB012) to four-cycle engines and how they differ from those used in two-cycle
Level: Intermediate Focus:Operations/Maintenance gas engines. This is followed by a basic introduction to combustion
This operations-focused course has been designed to familiarize theory and the natural gas laws. After instruction in these important
operators and maintenance technicians with a typical reciprocating concepts the course proceeds to describe the two-stroke cycle process
compressor, pump-to-point type cylinder and packing lubrication in detail through the use of P-V and P-T diagrams and animations.
system. Students will be presented with information regarding the Review questions and interactive activities throughout the course will
identification, purpose, operation, and adjustment of the various help prepare the student for the final examination.
components that make up this system. Interactivities, animation,
and review questions strategically placed throughout the course
ENGINE PRE-IGNITION AND DETONATION (EWB010)
will challenge the learner to thoroughly understand the many
Level: Intermediate Focus: Maintenance
aspects of cylinder and packing lubrication and the pump-to-point
This course describes both normal and abnormal combustion
system.
processes in large-bore gas engines. The differences between pre-
ignition and detonation are also clearly defined. The course explains
SETSCREW-TYPE VALVE COVER REMOVAL AND the various causes of these destructive combustion processes, and
INSTALLATION (RWB013) suggests methods that can be used to reduce their frequency and
Level: Intermediate Focus: Maintenance
severity.
This detailed maintenance course offers an overview of the
setscrew-type valve cover, provides step-by-step instruction on how
ENGINE BALANCING (EWB011)
to remove and install the cover, lists the consequences of improper
Level: Intermediate Focus: Maintenance
removal and installation procedures, and addresses proper torque
This intermediate-level, maintenance-focused, two and four-cycle
values and procedures for the applicable fasteners. A variety of
engine balancing course provides information that will help the
interactivities challenge the learner to recognize common valve
student understand the importance of a properly balanced engine,
cover components, identify areas damaged by incorrect installation
the consequences of an unbalanced engine, component and system
procedures, and correctly list the order of major disassembly and
conditions that can affect engine balancing, and the recommended
re-assembly steps.
procedure for obtaining a well-balanced engine. Several interactivities
and challenging review questions will help the student learn and retain
CROSSHEAD AND PISTON SUPERNUTS (RWB015) the detailed information outlined in this course.
Level: Intermediate Focus: Maintenance
In this comprehensive maintenance course, students can learn
JOURNAL BEARINGS FOR RECIPROCATING PRODUCTS
where supernuts are applied in a reciprocating compressor, what
Level: Basic/Intermediate Focus: Operations/Maintenance
advantages they have over standard hex nuts, where to find the
This course will provide the student with information on the major
proper torque values and jackbolt lubricant, and how to properly
types of journal bearings found in gas engines and compressors. The
tighten and loosen the supernuts in both crosshead and piston nut
course describes the attributes desired in a journal bearing and defines
applications. Challenging interactivities and review questions will
certain aspects of bearing geometry. The student will be introduced
increase the student’s retention of the complex procedures and
to many of the causes of bearing failure. The primary modes of
sequential patterns that Dresser-Rand recommends to accurately
bearing failure and their underlying causes are illustrated through the
tighten these fasteners while maintaining piston rod and crosshead
use of photographs and drawings. The student will also be instructed
alignment.
in several recommended methods for measuring critical bearing
clearances, bearing crush, and the proper procedures for removing
and/or installing journal bearings. Review questions and interactive
activities throughout the course will help prepare the student for the
final examination.

4
 Reciprocating Compressors & Integral Engines

RECIP SHORT COURSES

0NE-DAY COURSES
ALL RECIPROCATING SHORT COURSES: $475 ENGINE COMBUSTION AND BALANCING (ECB-101)
RECIP PRESSURE PACKING (RPP-101) This one-day, lecture-based maintenance seminar has been designed
This one-day maintenance course will offer lessons on packing to help students better understand the characteristics of desired
fundamentals, packing case reconditioning and wedge-type engine combustion for both rich- and lean-burn engines. Further,
packing rings. Through classroom lecture and hands-on exercises, students will be taught the effects of abnormal combustion such as
students can learn the various styles of packing ring types, their detonation and pre-ignition on engine performance and component
location within the packing case, the proper orientation of each life. Also included in this program are lectures and interactivities
ring type within its respective cups, and how to recondition the covering the purpose and procedure for engine balancing.
critical cup surfaces.

RECIP CYLINDER MAINTENANCE (RCM-101) ENGINE FRAME AND RUNNING GEAR MAINTENANCE
During this one-day classroom and hands-on maintenance (EFM-101)
seminar, participants will be instructed in many aspects of During this one-day, classroom-based maintenance course, the
compressor cylinder maintenance. Students will be challenged to instructor will present lectures relating to the maintenance of an
learn cylinder bore measurement and evaluation; operation and integral engine’s frame and running gear components. Included are
replacement procedures of piston rings and rider bands; removal journal bearings, connecting rods, web deflectors, foundation bolting
and installation of piston and rod assemblies; measuring and and frame lubrication systems.
interpreting piston rod runout; valve replacement; and torquing
procedures. ENGINE CYLINDER MAINTENANCE (ECM-101)
Included in this one-day, classroom-based course are lectures covering
RECIP VALVE OPERATION AND MAINTENANCE practices and procedures that are recommended to properly maintain
(RVM-101) the power cylinders of integral engines. Lecture topics include: power
This one-day maintenance course offers classroom lectures cylinder heads, liners, pistons, and piston rings, as well as cam timing,
and hands-on exercises that will help participants understand valve lash adjustment and cylinder break-in procedures.
compressor valve theory of operation, the various styles of valves,
typical causes of valve failure and the steps to recondition critical OPERATOR SCHOOL
valve surfaces.
TWO-DAY COURSE
RECIP CAPACITY CONTROL (RCC-101) RECIPROCATING COMPRESSOR OPERATOR SCHOOL
Valve unloaders, clearance pockets and capacity control systems (RCO-102)
are some of the topics that will be covered in this one-day This two-day, classroom-based course has been designed specifically
classroom and hands-on maintenance course. After several for operators of reciprocating compressors. Generic in nature, this
informative lectures, students will experience disassembling course offers operators familiarization with major components that
unloader actuators and adjusting critical valve unloader clearances comprise a compressor and will offer insight into the theory of
using a hands-on workstation. compression as it relates to operational issues. Typical compressor
systems such as frame lubrication, cylinder lubrication, cooling,
process gas, capacity control, buffer gas, and other utilities will
RECIP COURSES (EUROPE) be addressed so that the operator may understand the purpose
FOUR-DAY COURSES and function of each. The course will wind up with an interactive
troubleshooting session designed to help the operators identify
RECIPROCATING COMPRESSOR OPERATION & possible causes of typical compressor upsets.
MAINTENANCE (RC-THEO) Price: $925
This four-day course (although based on the D-R product range)
is generic in subject matter. The information presented may be RECIP COURSES (ASIA PACIFIC)
applied to a variety of manufacturers’ machines. Topics covered
FOUR-DAY COURSE
include reciprocating compressor theory, frame and running gear,
cylinders, pistons and packing rings, valves, capacity control, frame
RECIPROCATING COMPRESSOR OPERATION AND
and cylinder lubrication systems and operation, cooling systems,
maintenance and rod run-out. Price: ₤1,430 MAINTENANCE TRAINING
This four-day classroom program covers a wide range of maintenance
and operational concerns related to frame components of all D-R
RECIPROCATING COMPRESSOR HANDS-ON (RC-PRAC)
process compressors (previous Ingersoll-Rand – HHE/ESH/HSE,
This four-day course is based on the D-R four-cylinder RDS process
and previous Worthington – BDC). Topics include journal bearings;
reciprocating gas compressor. Activities undertaken include
compressor cylinders; pistons; rods and rings; packing/oil wiper rings;
removal of piston rod, crosshead and connecting rod; removal of
compressor valves; capacity control devices; and lubrication and
main bearings and crankshaft; piston removal and refitting; piston
cooling systems. Also included are discussions on compressor cylinder
clearance checks; piston rod run-out; valve removal; removal
theory, valve failure analysis, compressor installation and general
and assembly of packings; cylinder clearances; and maintenance
compressor maintenance and troubleshooting.
procedures.
Price: See Schedule
Price: ₤1,430

5
Reciprocating Compressors & Integral Engines

RECIPROCATING COMPRESSORS & INTEGRAL GAS ENGINES SCHEDULE

BATON ROUGE, LOUISIANA USA

Aug 17-20................................................................................................................................................................................Recip Compressor School (RCS-105)
Aug 23-27..................................................................................................................................................................................... Recip Compressor Lab (RCL-215)

CILEGON, INDONESIA
May 3-6............................................................................................................................................... Recip Compressor Operation & Maintenance

GARYVILLE, LOUISIANA USA (Hosted by Marathon Petroleum, LLC)

Mar 15-18................................................................................................................................................................................Recip Compressor School (RCS-105)
Mar 22-25..................................................................................................................................................................................... Recip Compressor Lab (RCL-215)

HORSHAM, PENNSYLVANIA USA

April 13-16...............................................................................................................................................................................Recip Compressor School (RCS-105)
April 19-23.................................................................................................................................................................................... Recip Compressor Lab (RCL-215)

HOUSTON, TEXAS USA

March 8-12.................................................................................................................................................................................. Wire Alignment School (WAS-245)
May 4-7............................................................................................................................................................... High-Speed Recip Compressor School (HRS-105)
May 10-13.................................................................................................................................................................High-Speed Recip Compressor Lab (HRL-215)
September 14-17....................................................................................................................................................................Recip Compressor School (RCS-105)
September 20-24......................................................................................................................................................................... Recip Compressor Lab (RCL-215)
Nov 15-19.................................................................................................................................................................................... Wire Alignment School (WAS-245)

KUALA LUMPUR, MALAYSIA

April 5-8.............................................................................................................................................. Recip Compressor Operation & Maintenance
Nov 8-11............................................................................................................................................. Recip Compressor Operation & Maintenance

PAINTED POST, NEW YORK USA

April 26-30..................................................................................................................................................................................... Integral Engine School (IES-105)
May 3-7...............................................................................................................................................................................................Integral Engine Lab (IEL-215)
June 14-18...............................................................................................................................................................................Recip Compressor School (RCS-105)
June 21-25.................................................................................................................................................................................... Recip Compressor Lab (RCL-215)
Oct 18-22................................................................................................................................................................................Recip Compressor School (RCS-105)
Oct 25-29..................................................................................................................................................................................... Recip Compressor Lab (RCL-215)

PETERBOROUGH, UNITED KINGDOM

March 1-4..................................................................................................................................Reciprocating Compressor Operation and Maintenance (RC-THEO)
March 8-11............................................................................................................................................................ Reciprocating Compressor Hands On (RC-PRAC)
September 6-9...........................................................................................................................Reciprocating Compressor Operation and Maintenance (RC-THEO)
September 13-16.................................................................................................................................................. Reciprocating Compressor Hands On (RC-PRAC)

SHANGHAI, CHINA
December 13-16................................................................................................................................. Recip Compressor Operation & Maintenance

To schedule short courses for your group, contact one of the training registrars listed in the back of this catalog.

See "important information" page for Asia Pacific promotions

Asia Pacific Pricing:
Malaysia
Price: US $2,200 includes daily meals and training materials only.
Indonesia
Price: US $1,400 includes daily meals and training materials only.
Shanghai
Price: US $1,756 includes daily meals, accommodation, and training materials.

6
 Steam Turbines

INSTRUCTOR-LED STEAM TRAINING WEB-BASED STEAM TRAINING COURSES

MULTI-DAY COURSES LEARN AT YOUR OWN PACE
STEAM TURBINE OPERATION & MAINTENANCE STEAM TURBINE FUNDAMENTALS AND MAJOR
(STC-225) COMPONENTS (SWB001)
This five-day course is intended for operators, mechanics, Level: Intermediate Focus: Operations/Maintenance
supervisors and process and mechanical engineers with emphasis This course describes steam turbine fundamentals associated with
on the practical aspects of machinery operation and maintenance. impulse and reaction-type turbines, and explains the major com-
The first three days in a classroom setting offer the following ponents associated with a steam turbine, including turbine cases,
topics: steam turbine fundamentals, components and functions, internal steam path components, safety devices, bearings, seals and
applications, equipment variations, steam turbine control systems, valves.
detailed operation and maintenance procedures, safety practices,
disassembly, inspection, evaluation and reassembly sequence. STEAM TURBINE OPERATION (SWB002)
Level: Intermediate Focus: Operations
The two-day, hands-on lab gives participants an opportunity This intermediate-level course is designed to offer the student an
to apply knowledge previously learned in the Steam Turbine understanding of how to start, load, and stop a steam turbine. Lesson
Operation & Maintenance Program. Students are required to topics include preparations for starting, starting and warm-up, over-
make all necessary clearance checks, evaluate the condition speed testing, normal operation and loading, and unloading and stop-
of components, and keep accurate records of the equipment. ping. Each lesson is designed with interactivities and review questions
Individual tasks are reinforced through various workstations to gain to reinforce learning concepts.
actual assembly/disassembly experience. Specific tasks include
maintenance sequence review; maintenance safety; component STEAM TURBINE OVERSPEED TRIP SETTINGS (SWB003)
removal; inspection; and installation of casing, thrust bearings, Level: Intermediate Focus: Maintenance
journal bearings, shaft seals, rotor, hand valves, nozzle rings, and This intermediate level course describes the components that make
governor assemblies. up mechanical and electrical overspeed trip systems for steam tur-
Price: $2,350 USD bines. Detailed lessons, interactivities, and periodic review questions
can help students understand the purpose of overspeed systems, as
MULTI-STAGE STEAM TURBINE CLASS/HANDS-ON well as what adjustments and testing are required for the systems.
(MST-315)
This five-day course is intended for operators, mechanics, STEAM TURBINE SHORT COURSES
supervisors and process and mechanical engineers with emphasis
ONE-DAY COURSE
on the practical aspects of multi-stage machinery operation and
maintenance. Two days are devoted to classroom presentations STEAM TURBINE OVERSPEED TRIP SETTINGS (SOT-101)
that include steam turbine fundamentals, detailed operation and This one-day course is intended for operators and mechanics, but is
maintenance procedures (disassembly, component evaluation and also suitable for supervisors and process and mechanical engineers,
re-assembly). The last three days are dedicated to a hands-on lab with its emphasis on the practical aspects of the trip system
workshop with two roundtable discussion sessions. Participants operation and maintenance. A portion of this course will be devoted
are required to inspect and disassemble a valve rack and governor to classroom presentations that include trip fundamentals, detailed
linkage; remove bearings, rotor, diaphragms, labyrinth glands operation of the various mechanical and electrical trip systems,
and springs, etc; and install bearings and diaphragms using an and maintenance procedures that include disassembly, component
alignment mandrel. Valve lead will be checked and adjusted. evaluation, re-assembly, and adjustment. The remainder of the
Price: $2,520 USD course offers a hands-on lab where students can disassemble and
inspect a mechanical overspeed trip system. Upon reassembly, the
MULTI-STAGE STEAM TURBINE CLASS/THEORY students can set the trips to the specified values, perform the required
(MST-103) overspeed checks, and adjust the system as necessary.
This three-day course is intended for operators, mechanics, Price: $475
supervisors and process and mechanical engineers with emphasis
on the practical aspects of multi-stage machinery operation and
maintenance. Three days are devoted to classroom presentations
OPERATOR SCHOOL
that include steam turbine fundamentals, detailed operation, TWO-DAY COURSE
maintenance procedures (disassembly, component evaluation,
STEAM TURBINE OPERATOR SCHOOL (STO-102)
and reassembly), and trouble-shooting techniques. Classroom
This two-day, classroom-based course has been designed specifical-
discussion will cover the inspection and disassembly of the valve
ly for operators of steam turbines. Generic in nature, this course is
rack and governor linkage; removal of bearings, rotor, diaphragms,
intended to familiarize operators with major components that com-
labyrinth glands, and springs. Installation of bearings, diaphragm
prise a steam turbine, and will offer insight into steam turbine theory
checks using a mandrel, and checks and adjustments of the valve
as it relates to operational issues. Topics to be covered include:
rack will also be covered.
types of steam turbines and their applications; typical auxiliary sys-
Price: $1,550 USD
tems; turbine controls and governors; basic maintenance practices;
and overspeed systems. The course will conclude with an interactive
troubleshooting session designed to help operators identify possible
causes of typical turbine problems.
Price: $925

7
Steam Turbines

STEAM COURSES (EUROPE) STEAM COURSES (ASIA PACIFIC)

FOUR-DAY COURSE FOUR-DAY COURSE
STEAM TURBINE OPERATION & MAINTENANCE STEAM TURBINE OPERATION AND MAINTENANCE
(ST-THEO) This four-day course emphasizes the practical aspects of machinery
This four-day course is intended for operators, mechanics, supervi- operation and maintenance. It is designed for the following groups:
sors, and process and mechanical engineers with an emphasis on operators, supervisors, and mechanical engineers. Three days of
the practical aspects of machinery operation and maintenance. classroom training cover the following topics: steam turbine fun-
Topics include steam turbine fundamentals, components and func- damentals, components and functions, applications, equipment
tions, applications, equipment variations, steam turbine control variations, steam turbine control systems, detailed operation and
systems, detailed operation, maintenance procedures, safety maintenance procedures, safety practices, disassembly, inspection,
practices, disassembly, inspection, evaluation, and reassembly evaluation, and reassembly sequence. During one day of hands-on
sequence. Price: ₤1,430 training, participants will disassemble and assemble a single-stage
steam turbine. Special tasks include maintenance sequence review,
STEAM TURBINE OPERATION & MAINTENANCE HANDS-ON maintenance safety, component removal, inspection, and installation
(ST-PRAC) of casing, thrust bearings, journal bearings, shaft seals, and nozzle
This four-day course is intended for mechanics, supervisors, and rings assemblies.
mechanical engineers with emphasis on the practical aspects Price: See Schedule
of machinery operation and maintenance. The first two days in
a classroom setting offer topics that include steam turbine fun-
damentals, components and functions, applications, equipment
variations, steam turbine control systems, detailed operation and
maintenance procedures, safety practices, disassembly, inspection,
evaluation, and reassembly sequence.
The remaining two days of the hands-on labs give participants an
opportunity to apply knowledge previously learned. Trainees are
required to make all necessary clearance checks, evaluate the
condition of components, and keep accurate records of the equip-
ment. Specific tasks include component removal, inspection, and
reassembly sequence of these components. Price: ₤1,430

STEAM TURBINE SCHEDULE

BATON ROUGE, LOUISIANA USA PETERBOROUGH, UNITED KINGDOM

July 12-16........................................... Steam Turbine O&M (STC-225) April 19-22............. Steam Turbine Operation and Maintenance (ST-THEO)
April 26-29................................ Steam Turbine O&M Hands-On (ST-PRAC)
CHESAPEAKE, VIRGINIA USA October 4-7........... Steam Turbine Operation and Maintenance (ST-THEO)
June 14-18......................................... Steam Turbine O&M (STC-225) October 11-14.......................... Steam Turbine O&M Hands-On (ST-PRAC)

CILEGON, INDONESIA SHANGHAI, CHINA

October 25-28.....................Steam Turbine Operation & Maintenance November 16-19........................Steam Turbine Operation & Maintenance

HORSHAM, PENNSYLVANIA USA

Aug 16-20........................................... Steam Turbine O&M (STC-225) To arrange short courses for your group, contact one of the train-
ing registrars listed in the back of this catalog.
HOUSTON, TEXAS USA
See "important information" page for Asia Pacific promotions
Nov 1-5........... Multi-Stage Steam Turbine Class/Hands-On (MST-315) Asia Pacific Pricing:
Indonesia
NAPERVILLE, ILLINOIS USA Price: US $1,400 includes daily meals and training materials only.
April 12-16...... Multi-Stage Steam Turbine Class/Hands-On (MST-315) Shanghai
Price: US $1,756 includes daily meals, accommodation, and training
OLEAN, NEW YORK USA materials.
Sept 13-17..... Multi-Stage Steam Turbine Class/Hands-On (MST-315)
Oct 4-8............................................... Steam Turbine O&M (STC-225)

8
 Turbomachinery

INSTRUCTOR-LED TURBO TRAINING COURSES

MULTI-DAY COURSES
CENTRIFUGAL COMPRESSOR OPERATION & GAS TURBINE OPERATION & MAINTENANCE (GTC-225)
MAINTENANCE (CCS-105) This four-day intermediate-level, combination classroom and hands-on
This five-day intermediate-level, classroom-style course introduces course provides a basic introduction and familiarization with D-R power
students to centrifugal compressor fundamentals and principles turbines and the opportunity to participate in a hands-on lab. Students
of operation. Students will review various models of centrifugal can gain knowledge of the major components of gas turbines and the
compressors manufactured by Clark, Worthington, Dresser Clark, fundamentals of their operation. The course covers the construction
Dresser, Ingersoll-Rand and Dresser-Rand. The course provides of various gas generators such as General Electric LM2500 and
in-depth coverage of all existing support systems such as lube oil, LM1600, Allison 501, and the Rolls-Royce Avon, plus construction
seal oil and dry gas seal systems, as well as the instrumentation of the DR-61 and the DR-22 (GT-22) power turbines. Students will
systems required to keep these units in operation. Students can interpret and trace all of the support system diagrams such as airflow,
learn the correct procedures to perform routine maintenance or a fuel and start gas system, gas generator lube oil system, water wash
complete teardown and reassembly for scheduled overhauls. system, instrumentation, enclosure airflow and the fire and gas
Price: $2,350 suppression system. During the hands-on lab, students will participate
in the complete disassembly/reassembly of a DR-22 power turbine.
Students will have the opportunity to handle nearly every part of the
CENTRIFUGAL COMPRESSOR OPERATOR COURSE
power turbine and become familiar with all required tools used in the
(CC0-102) maintenance procedures.
Designed for operators, this two-day course will identify the Price: $2,350
major components of a centrifugal compressor and offer insight
into the fundamentals of compression. Typical support systems
such as lube oil, seal oil, dry gas seal and machinery protection
HOT GAS EXPANDERS (HGE-103)
During this three-day intermediate-level, classroom-style course,
will be addressed so that operators understand the purpose and
students will receive an overview on high-temperature power recovery
function of each. The course also will cover start-up and shut
expanders used for service in the worldwide energy and fertilizer
down procedures along with monitoring normal parameters for
industries. The training will focus on the Dresser-Rand power recovery
safe operation. Upon completion of this course, students can be
product line for the fluid catalytic cracking (FCC) process in the
better equipped to diagnose and effectively operate centrifugal
petroleum refining industry, and the nitric acid process used in the
compressors.
fertilizer industry. Topics will include: principles of operation, basic
Price: $925
construction, function of components and auxiliary support systems
such as cooling and sealing, lube oil, and machinery protection.
CENTRIFUGAL COMPRESSOR HANDS-ON LAB (CCL-215) Monitoring of operating conditions, safety considerations, performance
This interactive five-day course requires the students to participate monitoring to detect catalyst deposition, and routine maintenance will
in the complete disassembly/reassembly of horizontally and be explained. Disassembly, inspection of components, identification
vertically split D-R compressors. They can learn how to use of potential problems, maintenance recommendations and reassembly
all of the special tooling required to perform the maintenance of the expanders also will be covered.
techniques when working with both hydraulic and polygon-fit Price: $1,550
components, as well as how to use all the normal measuring
instruments to evaluate the condition of a compressor’s internal
components. This course also provides separate workstations
for removal/installation of a dry gas seal and for checking the
clearance of tilt pad radial bearings.
Price: $2,520

WEB-BASED COURSES
LEARN AT YOUR OWN PACE

SURGE AND SURGE CONTROL (TWB002) BASIC CENTRIFUGAL COMPRESSOR TYPES (TWB001)
Level: Intermediate Focus: Operations/Maintenance Level: Intermediate Focus: Operations/Maintenance
This intermediate operator-oriented course discusses the This entry-level course identifies the different types of centrifugal
surge phenomena that can occur when operating a centrifugal compressors, examines the major components used in their
compressor. It describes the warning signs of surge, the construction and illustrates an assortment of flow path arrangements
consequences of surge and the strategies and benefits of used in various process applications. A variety of interactivities and
controlling it. The course also identifies the components of a periodic review questions challenge the learner to distinguish between
typical performance curve and their relationship to the operation several groups of centrifugal compressors and how they are applied in
of a centrifugal compressor. A variety of interactivities and process machinery.
periodic review questions challenge the learner to recognize
the characteristics of surge and how to avoid it during normal
operation.

9
Turbomachinery

TURBO COURSES (ASIA PACIFIC)

FOUR-DAY COURSES
CENTRIFUGAL COMPRESSOR ROTOR DYNAMIC, VIBRATION, AND CONDITION
OPERATION & MAINTENANCE MONITORING
This four-day course introduces students to centrifugal compres- This four-day course was created to provide fundamental understand-
sor fundamentals and their principles of operation. The students ing of the dynamic behavior of turbo machinery such as steam tur-
will review the various models of centrifugal compressors manu- bines, gas turbines, generators, turbo compressors, etc. The basics
factured by Clark, Dresser, Dresser-Clark, Dresser-Rand, Ingersoll- of vibration measurement and the interpretation of data are also
Rand, and Worthington. It provides in-depth coverage of all exist- discussed. The hands-on workshops simulate malfunctions to enable
ing support systems such as lube oil, seal oil and dry gas seal students to gain practical experience.
systems as well as the instrumentation systems required to keep This course is for engineers and technicians who are involved in analy-
these units in operation. The students will learn the correct pro- sis and trouble-shooting of vibration problems. Operators can also
cedures to perform routine maintenance or a complete tear-down benefit from a better understanding on the dynamic behavior of the
and re-assembly for scheduled overhauls. machinery gained in this course.
Price: See Schedule Price: See Schedule

TURBO SHORT COURSE TURBO COURSES (EUROPE/MIDDLE EAST)

ONE-DAY COURSE FOUR-DAY COURSES
TURBO BEARINGS, SEALS, AND SYSTEMS (TBS-101) CENTRIFUGAL COMPRESSOR OPERATION & MAINTENANCE
This single-day course is aimed at both operations and (CC-THEO)
maintenance personnel. The classroom lecture will focus on This four-day course covers both vertically and horizontally split
the various styles of bearings and seals used in Dresser-Rand compressors manufactured by Clark, Worthington, Ingersoll Rand and
centrifugal compressors. Component form and function of both Dresser-Rand. Centrifugal compressor theory covers basic aerodynam-
radial and thrust bearings, from sleeve to magnetic bearings, will ics, compressor surge, lubricating and sealing systems, dry gas seals,
be covered. Students also will review the design and principles mechanical build, and operation.
of oil film seals, cone seals, contact seals and dry gas seals. Price: €1,690
Support systems such as overhead level control systems, back
pressure and split range control systems, sour seal oil and trap CENTRIFUGAL COMPRESSOR HANDS-ON (CC-PRAC)
packages, buffer gas and separation gas systems will be described This four-day course is based on a vertically split 451B Line
along with modern dry gas seal systems. compressor. After pre-strip procedures, the compressor is completely
Price: $475 dismantled and rebuilt using the following procedures: removal of
bearings; hydraulic thrust disc; seals – oil film and dry gas; bundle
rotor; internal clearance inspection and rebuild. Maintenance and
special tooling are discussed in detail.
Price: €1,690

10
 Turbomachinery

TURBOMACHINERY PRODUCTS SCHEDULE

ABU DHABI, SAUDI ARABIA SHANGHAI, CHINA

March 15-18.......................... Centrifugal Compressor O&M (CC-THEO) June 15-18.................. Centrifugal Compressor Operation & Maintenance
March 21-24.................. Centrifugal Compressor Hands-On (CC-PRAC) Oct 19-22.................... Centrifugal Compressor Operation & Maintenance

CILEGON, INDONESIA
March 22-25........... Centrifugal Compressor Operation & Maintenance To arrange short courses for your group, contact one of the train-
July 19-22...............Rotor Dynamic, Vibration, & Condition Monitoring ing registrars listed in the back of this catalog.

HOUSTON, TEXAS USA See "important information" page for Asia Pacific promotions
Jan 11-15.............................. Centrifugal Compressor O&M (CCS-105) Asia Pacific Pricing:
Jan 18-22 .............. Centrifugal Compressor Hands-On Lab (CCL-215) Malaysia
Sept 28-Oct 1...........Gas Turbine Operation & Maintenance (GTC-225) Price: US $2,200 includes daily meals and training materials only.
Dec 6-10............................... Centrifugal Compressor O&M (CCS-105) Indonesia
Dec 13-17 ............. Centrifugal Compressor Hands-On Lab (CCL-215) Price: US $1,400 includes daily meals and training materials only.
Shanghai
KUALA LUMPUR, MALAYSIA Price: US $1,756 includes daily meals, accommodation, and training
June 21-24............. Centrifugal Compressor Operation & Maintenance materials.
Oct 4-7...................Rotor Dynamic, Vibration, & Condition Monitoring
Nov 29-Dec 2 ........ Centrifugal Compressor Operation & Maintenance

LE HAVRE, FRANCE
Sept 7-10.............................. Centrifugal Compressor O&M (CC-THEO)
Sept 13-16.................... Centrifugal Compressor Hands-On (CC-PRAC)

LOS ANGELES, CALIFORNIA USA

May 17-21 . ........... Centrifugal Compressor Hands-On Lab (CCL-215)

OLEAN, NEW YORK USA

April 26-30............................ Centrifugal Compressor O&M (CCS-105)
May 3-7................... Centrifugal Compressor Hands-On Lab (CCL-215)
July 13-15.............................................Hot Gas Expanders (HGE-103)
Aug 2-6.................................. Centrifugal Compressor O&M (CCS-105)
Aug 9-13................. Centrifugal Compressor Hands-On Lab (CCL-215)
Oct 11-15.............................. Centrifugal Compressor O&M (CCS-105)
Oct 18-22................ Centrifugal Compressor Hands-On Lab (CCL-215)

Additional Programs

CONTROL SYSTEMS

The D-R Controls Training Department, located in Houston, Texas, offers a wide range of training options tailored to your needs, based on the
type of equipment you have purchased from D-R.

From operational fundamentals to in-depth programming, surge control, and load sharing, our professional instructors can help your person-
nel better troubleshoot your control panels. Whether you need training for operators to optimize your equipment, or controls training for your
technical or engineering staff, D-R can meet your specific training needs.

Our Houston classroom is located adjacent to our panel manufacturing center and is equipped with computer stations for hands-on training.
A control panel is available for set-up and configuration. Our limited class size allows one-on-one training and instructor interaction. Subject
matter experts are available for consultation. We can also travel to your site, which allows a greater number of students to be trained at a
lower cost.

D-R Controls training can increase your employees’ knowledge and skills, thereby improving the reliability of your control panels and associ-
ated equipment. Please contact our Controls Training Department or your regional D-R account manager for more information (see Notes
page).

11
Notes

Dresser-Rand Turbomachinery/Steam Turbine Products Dresser-Rand Asia Pacific Sdn Bhd

Corporate Headquarters Dresser-Rand Unit 8-1, 8th Floor, Bangunan Malaysian Re
West8 Tower, Suite 1000 Product Training 17 Lorong Dungun, Damansara Heights
10205 Westheimer Road Paul Clark Drive 50490 Kuala Lumpur, Malaysia
Houston, Texas 77042 Olean, NY 14760-0560 Phone: (Int'l+60) 3-2093-6633
Tel: (Int'l +1) 713-354-6100 Phone: (Int'l +1) 716-375-3975 Fax: (Int'l+60) 3-2093-2622
Fax: (Int'l +1) 713-354-6110 Fax: (Int'l +1) 716-375-3979 E-mail: trainingAP@dresser-rand.com
E-mail: info@dresser-rand.com
Control Systems Dresser-Rand Company Ltd.
For more information e-mail us at Dresser-Rand 85 Papyrus Road
training@dresser-rand.com Product Training Peterborough, Cambridgeshire
1202 W. Sam Houston Pkwy. N. PE4 5BH, United Kingdom
For current information about D-R Houston, TX 77043 Tel: (Int'l +44) 1733-292215
product training, visit: Phone: (Int'l +1) 713-365-2645 Fax: (Int'l +44) 1733-292234
www.dresser-rand.com. Fax: (Int'l +1) 713-365-2660 E-mail: dgoodwin@dresser-rand.com

TRAINING REGISTRARS Dresser-Rand S.A. Note: Register for courses online at:
Training Administrator www.dresser-rand.com.
Reciprocating Compressors and 31, Boulevard Winston Churchill
Integral Gas Engines 76080 Le Havre Cedex 7013 France
Dresser-Rand Phone: (Int'l +33) 2-35-25-5296
Product Training Fax: (Int'l +33) 2-35-25-5887
100 Chemung Street E-mail: pdiesnis@dresser-rand.com
Painted Post, NY 14870
Phone: (Int'l +1) 607-937-2303
Fax: (Int'l +1) 607-937-2047

12
 Abu Dhabi Baton Rouge, LA, USA Chesapeake, VA, USA Cilegon, Indonesia
Pull-out Schedule A B C C

G H
G

P
P

A
A
Garyville, LA, USA Horsham, PA, USA Houston, TX, USA Kuala Lumpur, Malaysia Le Havre, France Los Angeles
G H H K L L

P B H
H P B
P
P

H
H

P
P

C B H

O O

O L O

O
S K
C
L
L
s, CA, USA Naperville, IL, USA Olean, NY, USA Painted Post, NY, USA Peterborough, UK Shanghai, China
L N O P P
Pull-out Scheduler
S

H P

K S

C S

O H

O H
H

S K
K
 Los Angeles
Important information L

Registration, Payment, and Cancellation Policy (visit www.dresser-rand.com for additional information)

• All registrations will be confirmed upon receipt of the payment arrangements for the specific program

• Substitutions with personnel from the same company may be made at any time; with notification to the appropriate registrar.

• Class size and duration are determined by the type of school and the training location.

• Registrations cancelled by the client less than fifteen (15) days before the program are subject to one-half of the registration fee. "No
shows" are subject to the entire program fee.

• D-R reserves the right to cancel or reschedule a program up to 10 days before the requested program.

Payments

All payments for U.S. programs must be in U.S. dollars.

Purchase orders must be received by the appropriate registrar 15 days before the requested program.

MasterCard, Visa, and American Express are accepted in the U.S. only, as are company checks on the first day of class. Company checks
should be made out to "Dresser-Rand Company".

Prices include instruction, training manual, and lunches. Asia Pacific programs include accommodations and local transportation.

Asia Pacific Programs - Purchase orders must be received by the appropriate registrar 15 days in advance of the requested program.

Payment is required by US dollar bank draft with beneficiary to "Dresser-Rand Asia Pacific Sdn Bhd" or by telegraphic transfer. Please
contact the Asia Pacific registrar for further details.

Travel Information

•C
 lasses/labs are generally held from 8 a.m. to 4 p.m. daily. Those traveling by air should make their reservations for departure no earlier
than 3:30 p.m. on the last day of class. Please account for the estimated airport travel times listed above when making reservations.

•R
 educed rate hotel accommodations are available for Painted Post and Olean schools. Participants are responsible for payment. Hotels,
phone numbers and rates are available upon request.

•A
 irport ground transportation is available at all locations; however, rental cars are recommended for U.S.-based programs. Rental car
agencies in the U.S. require the driver to have a valid U.S. or international driver license and a valid credit card.

• Participants in hands-on labs are required to bring safety shoes, safety glasses and work clothes/coveralls. Gloves are provided when
necessary.

• Check with the registrar for specific class dates, times, site information and travel accommodations.

Driving directions are available on our Web site at www.dresser-rand.com

Additional Information

Participants in classroom-based courses are required to wear business casual clothes or jeans (shorts not permitted), and leather-upper
shoes (neither open-toe nor open-heel shoes are permitted – no clogs or sandals).

Participants in hands-on labs are required to bring safety shoes, safety glasses, and work clothes/coveralls (shorts not permitted). Gloves
are provided when necessary.

Contact your local training registrar (see page 12) for any questions you may have with regards to proper attire.

Prices subject to change without notice.

Asia Pacific Promotions:

(applies to all listed AP locations):
5% discount for early registration (one month before the start of class).
5% discount for a minimum of three-person enrollment from same company.