RunnTech Electronics (Changzhou) Corp.
RT100 Multi-axis Joystick Controller
RT100 Multi-axis Joystick Controller
Product Features
Potentiometer sensor or Hall sensor;
Single axis, dual axis or 3 axis control;
Spring-return to center or Friction-hold operation;
High-intensity lever with excellent proportional control or switch output;
Easy to install, flexible operation, uniform texture, maintenance-free;
Application
RT100 Multi-axis Joystick Controller , is mainly used in hydraulic proportional control or
variable frequency motor control, such as Rotary table (drilling rig), Crane, Aerial work
platforms, Forklift trucks, Mobile hydraulics, Shield tunneling machine, Mining hoist, etc.
Technical Information
Environment Parameter
Storage Temperature -50+80
Operating Temperature -40+80
Protection Grade IP64
Vibration Amplitude3g, Frequency: 10Hz-200Hz
Impact 20g, 6ms, Semi-sinusoidal
EMC Anti-interference Rank 100V/m, 30MHz to 1GHz, 80% sine-wave modulation, meet EN50082-2 (1995) standard
EMC Emission Rank Rank B, 150KHz to 30MHz, meet EN50081-2 (1993) standard
ESD Anti-interference Rank Rank 4, 8KV contact discharge, 15KV air discharge, meet IEC61000-4-2 standard
Mechanical Parameter
Mechanical Angle Potentiometer: 32, Hall: 20
Operating Torque 5N (50N max)
Mechanical Life 5 million
Mechanical Error 0.5
Electrical Parameter
Power Supply Voltage 50.5V DC
Hall
Power Supply Current Consumption 6.5mA/hall sensor
tel: +86 519 8223 0053 | fax: +86 519 8886 5269 | email: info@runntech.com | website: www.runntech.com 1-11
RunnTech Electronics (Changzhou) Corp. RT100 Multi-axis Joystick Controller
Resolution Ratio infinite
Maximum Voltage 15VDC
Hall
Reversed Polarity Maximum Voltage 14.5VDC
Load Resistance 5K
Median Voltage (no-load) 48 - 52%Vs
Power Supply Voltage DC24V
Power Supply Current <20mA
Resolution Ratio infinite
Resistance (10%) 5K and 10K
Potentiometer Electrical Angle 32
Output Voltage Range (relative voltage) 0100%1090%
Median Voltage 48%52%
Potentiometer Maximum Load Voltage 32VDC
Maximum Power Consumption (25C) 0.25W
Switch Direction Switch Position 3
Product Configuration
No. Item Content
1 Serial Number RT100 Multi-axis Joystick Controller
2 Operation Mode M - Friction hold T - Spring return to center MS - Friction hold & Self-lock
3 Limiter Plate
1. Y axis 2. Y & X axis cross direction 3. Y & X axis free movement
HV1: DC 5V, 0 2.5 5V (rail to rail)
HV2: DC 5V, 0.5 2.5 4.5V
Hall HV3: DC 5V, 1.0 2.5 4.0V
HV4: DC 5V, 1.25 2.5 3.75V
P1: Simple two directions output (potentiometer with dead zone)
P2: Simple single direction output
V1: DC24V -10V ~ 0 ~ +10V (voltage output)
4 Electrical Output Form V2: DC24V +10V ~ 0 ~ +10V (voltage output)
V3: DC24V -5V ~ 0 ~ +5V (voltage output)
Potentiometer V4: DC24V +5V ~ 0 ~ +5V (voltage output)
V5: DC24V 0 ~ +10V (voltage output)
V6: DC24V 0 ~ +5V (voltage output)
I1: 4 wire 4mA~12mA~20mA (current output)
I2: 4 wire 20mA~4mA~20mA (current output)
tel: +86 519 8223 0053 | fax: +86 519 8886 5269 | email: info@runntech.com | website: www.runntech.com 2-11
RunnTech Electronics (Changzhou) Corp. RT100 Multi-axis Joystick Controller
5 Potentiometer Type 1K, 2K, 5K, 10K, 20K or H - Hall type
6 Quantity of Switch Signal 01, 02 or 03 (quantity of directional switch signal in each axis).
7 Common Closed Position Refer to Table 4-3 Micro Switch Signal Closed Position
8 Handle Type Refer to Table 1-11-8 Handle: HD1, HD2, HD3, HD4, HD5, HD7, HD8, HD10, HD15
Mounting Dimensions M1: 5656, central hole 63, M2: 8585, central hole 63,
9
M3: 130110, central hole 63, M7: 8585, central hole 8080 (for HD10 grip)
RT100 - T - 2 - P1 10K - 02 89 - HD8 - M1
Mounting Dimensions
Serial Number Handle Type
Operation Mode Common Closed Position
Limiter Plate Quantity of Switch Signal
Electrical Output Form Potentiometer Type
Product Installation
tel: +86 519 8223 0053 | fax: +86 519 8886 5269 | email: info@runntech.com | website: www.runntech.com 3-11
RunnTech Electronics (Changzhou) Corp. Table 1-1 Handle Type
Table 1-1 Handle Type
with or without
1 Self-resetting button (BT1) or Diameter 3060
1 HD1
1 Self-lock button (BS1)
Reference 2-1
2 HD2 Diameter 32
3 HD3 Diameter 2424
with or without
1 Self-resetting button (BT1) or
4 HD4 Diameter 3087
1 Self-lock button (BS1)
Reference 2-1
5 HD5 Pull to release Diameter 3060
with or without
1 or 2 Self-resetting button (BT1) or Diameter 34105
6 HD7
1 or 2 Self-lock button (BS1) max Diameter 45
Reference 2-1
7 HD8 Diameter 4058
8 Multi-combinations,
HD10 Diameter 3060
Refer to Table 1-5 1-7
1 Self-resetting rocker switch (QTOT)
9 HD15 1 Dead mans button (BT1)
Refer to Table 1-8
10
11
tel: +86 519 8223 0053 | fax: +86 519 8886 5269 | email: info@runntech.com | website: www.runntech.com 4-11
RunnTech Electronics (Changzhou) Corp. Table 1-5 Handle HD10
Table 1-5 Handle HD10
HD10 Handle
HD10 handle is ergonomically designed, provides a high degree
of comfort, highly integrated, multi-channel buttons control
output, and the handle can be installed with a variety of
accessories: Analog output Thumb wheel controller, Self-locking
button, Self-resetting button.
With different combinations to meet the industry's needs:
Solenoid Valve Amplifier Control, Variable Frequency Motor
Control.
HD10 handle use PA66 + 305GF, with excellent high
temperature performance, can be installed in joystick RT100,
RT300, RT01, and RT02 to achieve multi-axis control
Operation Temperature -40-85
Storage Temperature -40-85
Meet Standard IEC68. part 2-30
Protection Grade IP64/65
107 62
131
40
10
55
Model Selection Style Description (all functions selection reference the Table2-1
HD10a without Deadmans button
HD10b with Deadmans button
BT1
tel: +86 519 8223 0053 | fax: +86 519 8886 5269 | email: info@runntech.com | website: www.runntech.com 5-11
RunnTech Electronics (Changzhou) Corp. Table 1-6 Handle HD910 Button Panel
Table 1-6 Handle HD10 Button Panel
Model Selection Style Description (all functions selection reference the Table 2-1)
1 Can install self-resetting button (BT) / self-locking button (BS)
2
2 3 2 Can install self-resetting button (BT) / self-locking button (BS)
4 2
3 Can install self-resetting button (BT) / self-locking button (BS)
3
4 2
4 Can install self-resetting button (BT) / self-locking button (BS)
5 3
5 4
Can install self-resetting button (BT) / self-locking button (BS)
4
6 Can install self-resetting button (BT) / self-locking button (BS)
Can install self-resetting button (BT) / self-locking button (BS) and
7 another proportional thumbwheel (W100) or rocker switch (QTOT)
2 Can install self-resetting button (BT) / self-locking button (BS) and
8
W100
another proportional thumbwheel (W100) or rocker switch (QTOT)
3
9
W100
2 proportional thumbwheel controller (W100) or rocker switch (QTOT)
W100
tel: +86 519 8223 0053 | fax: +86 519 8886 5269 | email: info@runntech.com | website: www.runntech.com 6-11
RunnTech Electronics (Changzhou) Corp. Table 1-7 Handle HD10 Button Panel
Table 1-7 Handle HD10 Button Panel
Model Selection Style Description (all functions selection reference Table 2-1)
10 proportional thumbwheel controller (W100) or rocker switch (QTOT)
W100
Can install Self-resetting button (BT) / Self-locking button (BS), and
11 another proportional thumbwheel (W100) or rocker switch (QTOT)
2 Can install Self-resetting button (BT) / Self-locking button (BS), and
12 Q another proportional thumbwheel (W100) or rocker switch (QTOT)
3
Can install Self-resetting button (BT) / Self-locking button (BS), and
13 another proportional thumbwheel (W100) or rocker switch (QTOT)
5
14 2 proportional thumbwheel controller (W100) or rocker switch (QTOT)
HD10b 13 - BT 4 R G - QTOT
Handle Type
Handle Panel Model Selection
3 position Self-resetting Rocker switch
Self-resettling Button Button Color
Button Quantity Button Position
Button Selection refer to Table 2-1
tel: +86 519 8223 0053 | fax: +86 519 8886 5269 | email: info@runntech.com | website: www.runntech.com 7-11
RunnTech Electronics (Changzhou) Corp. Table 1-8 Handle HD15
Table 1-8 Handle HD15
HD15 Handle
HD15 industrial handle is ergonomically designed, provides a
high degree of comfort, highly integrated, multi-channel
buttons control output, and the handle can be installed with
QTOT Rocker switch and Dead mans button.
HD15 handle use PA66 + 305GF, with excellent high
temperature performance, long-life high-current and good
hand feeling, can be installed in joystick RT100, RT300,
RT01 and RT02 to achieve multi-axis control
Operation Temperature: -25-85
Storage Temperature: -25-85
Meet the standard: IEC68, part 2-30
Protection Grade: IP64/65
106
10
38 59
HD15 - BT1 -QTOT
Handle Type
Dead mans button 250V2A
Double resetting Rocker switch
tel: +86 519 8223 0053 | fax: +86 519 8886 5269 | email: info@runntech.com | website: www.runntech.com 8-11
RunnTech Electronics (Changzhou) Corp. Table 2-1 Accessories
Table 2-1 Accessories
No. Type Description Parameter Additional
Self-resetting button Button color
Red-R
1 BT 24V2A Black-B
Yellow-Y
Green-G
Self-locking button Button color
Red-R
2 BS 24V2A Black-B
Yellow-Y
Green-G
3 position self-resetting rocker switch
3 QTOT 3 pins
250V15A
1 2 3
2 position self-resetting rocker switch
4 QTO 2 pins
250V15A
1 2
3 position self-locking rocker switch
5 QSOS 3 pins
250V15A
1 2 3
2 position self-locking rocker switch
6 QSO 2 pins
250V15A
1 2
3 position with
7 QSOT one side self-resetting, 3 pins
another side self-locking 250V15A
input 5V Warning:
8 W100 Hall Thumb Wheel Controller output 0-2.5-5V Please Far away from
the magnetic object
1K
2K
9 W100 Potentiometer 5K
10K
20K
tel: +86 519 8223 0053 | fax: +86 519 8886 5269 | email: info@runntech.com | website: www.runntech.com 9-11
RunnTech Electronics (Changzhou) Corp. Table 3-1 Mounting Dimension
Table 3-1 Mounting Dimension
No. Hole Model Installation Size Description Application
1 M1 5656
central hole 63
2 M2 8585
central hole 63
3 M3 130110
central hole 63
4 M7 8585
for HD10 grip
central hole
8080
tel: +86 519 8223 0053 | fax: +86 519 8886 5269 | email: info@runntech.com | website: www.runntech.com 10-11
RunnTech Electronics (Changzhou) Corp. Table 4-3 Micro Switch Signal Closed Position
Table 4-3 Micro Switch Signal Closed Position
9
Entity on behalf of the switch is closed 8
7
6
5
4
3
2
1
0
4
9
8
2
7
Analog output refer to the following figure
HV1: DC 5V, 0 2.5 5V (rail to rail)
HV2: DC 5V, 0.5 2.5 4.5V
Hall
HV3: DC 5V, 1.0 2.5 4.0V
HV4: DC 5V, 1.25 2.5 3.75V
P1: Simple two directions output (potentiometer with dead zone)
P2: Simple single direction output
Electrical Output Form
V1: DC24V -10V 0 +10V (voltage output)
V2: DC24V +10V 0 +10V (voltage output)
V3: DC24V -5V 0 +5V (voltage output)
Potentiometer
V4: DC24V +5V 0 +5V (voltage output)
V5: DC24V 0 +10V (voltage output)
V6: DC24V 0 +5V (voltage output)
I1: 4 wire 4mA 12mA20mA (current output)
I2: 4 wire 20mA 4mA20mA (current output)
tel: +86 519 8223 0053 | fax: +86 519 8886 5269 | email: info@runntech.com | website: www.runntech.com 11-11
