Scribd
Upload
45 views3 pages

R/C Control System: Communication Link

The radio control system uses a transmitter to send signals to a receiver, which then directs servos and electronic speed controls to operate parts of the aircraft. The transmitter assigns controls like sticks and switches to channels that correspond to functions on the aircraft controlled by the receiver. The receiver receives signals from the transmitter and sends instructions to connected components, with each channel controlling a separate function. Servos are used to control control surfaces and connect directly to the receiver, while electronic speed controls regulate the motor speed under receiver commands.

Uploaded by

13311A0341 S SHIVA SAI KIRAN
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
45 views3 pages

R/C Control System: Communication Link

The radio control system uses a transmitter to send signals to a receiver, which then directs servos and electronic speed controls to operate parts of the aircraft. The transmitter assigns controls like sticks and switches to channels that correspond to functions on the aircraft controlled by the receiver. The receiver receives signals from the transmitter and sends instructions to connected components, with each channel controlling a separate function. Servos are used to control control surfaces and connect directly to the receiver, while electronic speed controls regulate the motor speed under receiver commands.

Uploaded by

13311A0341 S SHIVA SAI KIRAN
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 3

R/C Control System

Communication link:
You talk to the transmitter (TX)
Transmitter talks to the receiver (RX)
Receiver talks to the servos and ESCs
Servos moves your control surfaces
The ESC drives the motor

Radio Control Transmitter (TX)


The transmitter uses radio signals to remotely control the aircraft/ hoverpod.
The control sticks (gimbals) or switches on the transmitter are each assigned to a channel.
The number of channels are how many functions or features can be used to control things on
the aircraft.
Different brand transmitters have different encryption and channel assignments. Usually they
are not cross compatible.

Radio Control Receiver (RX)


Receives the encoded radio signal from the TX and converts it to instructions for each
component connected to the receiver.
Each channel can control a separate function such as a servo, speed controller, lights, landing
gear,
etc.

Servos
Servos comes in many different sizes and shapes, but they have a common purpose: to move
control surfaces (180 degree).
Servos are usually classified by weight.
9 gram servos are used in most.
Servos connect directly to the receiver (RX).

Electronic Speed Control (ESC)


The ESC controls the speed of the motor as commanded by the receiver (RX).
The main battery plugs into the ESC.
Most ESCs have a built in BEC (Battery Elimination Circuit) that provides power to the receiver
(RX) and servos.

Contact :

MOHIT DHARIWAL +919933992777


AYUSH KANWAR +918768702045

You might also like