Scribd
Upload
383 views1 page

SKO Specification

This document provides the specification for superior kerosene oil according to BIS 1459-1974, including 8 key parameters to test like acidity, burning quality, color, copper strip corrosion, distillation results, flash point, smoke point, and total sulfur content. It lists the testing method, acceptable limits, and maximum/minimum values required to meet the specification for each parameter.

Uploaded by

sundhar
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
383 views1 page

SKO Specification

This document provides the specification for superior kerosene oil according to BIS 1459-1974, including 8 key parameters to test like acidity, burning quality, color, copper strip corrosion, distillation results, flash point, smoke point, and total sulfur content. It lists the testing method, acceptable limits, and maximum/minimum values required to meet the specification for each parameter.

Uploaded by

sundhar
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 1

BHARAT OMAN REFINERIES LIMITED, BINA

QUALITY ASSURANCE LABORATORY

SPECIFICATION FOR SUPERIOR KEROSENE OIL BIS 1459-1974

S.No PARAMETER METHOD LIMIT


1 Acidity, inorganic IS 1448 P :2 Nil
2 Burning Quality : IS 1448 P :5
a) Char value mg/kg of oil consumed, Max 20
b) Bloom on glass chimney Not darker than grey
3 Colour (Saybolt) Min IS 1448 P :14 +10
4 Copper Strip corrosion for 3 h at 50C IS 1448 P :15 Not worse than No. 1
5 Distillation IS 1448 P :18
a) Percent recovered below 200C, Min 20
b) Final boiling point,C, Max. 300
6 Flash Point (Abel), C , Min IS 1448 P :20 35
7 Smoke Point, mm, Min IS 1448 P :31 18
8 Total Sulphur, percent by mass, Max. IS 1448 P:34 /ASTM D 4294 0.25

You might also like