32A60

USERS MANUAL
32 LCD TELEVISION
32A60-1
For technical assistance or troubleshooting, please call 1-800-936-1168 or email
service@etecusa.com. The Technical Support Center is available 24-hours a day,
7-days a week.
Safety Instr uctions
CAUTION
RISK OF ELECTRIC SHOCK
DO NOT OPEN

Safety:
TO REDUCE THE RISK OF ELECTRICAL SHOCK DO NOT REMOVE COVER (OR BACK). NO
USER SERVICEABLE PARTS ARE INSIDE. REFER TO QUALIFIED SERVICE TECHNICIAN ONLY.
The lightning flash with arrowhead symbol, within an equilateral triangle, is intended to alert the user to the
presence of uninsulated dangerous voltage within the products enclosure that may be of sufficient magnitude
to constitute a risk of electric shock to the users.

The exclamation point within an equilateral triangle is intended to alert the user to the presence of important
operating and maintenance (servicing) instructions in the literature accompanying the television.

WARNING:
TO PREVENT FIRE OR SHOCK HAZARDS, DO NOT EXPOSE THIS PRODUCT TO RAIN OR MOISTURE.

NOTE TO CABLE / TV INSTALLER:

This reminder is provided to call the CATV system installers attention to Article 820-40 of the National Electric Code
(U.S.A.). The code provides guidelines for proper grounding and, in particular, specifies that the cable ground shall
be connected to the grounding system of the building, as close to the point of the cable entry as practical.

FCC REGULATORY INFORMATION:

This television has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15
of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential
installation. This television generates, uses and can radiate radio frequency energy and, if not installed and
used in accordance with the instructions, may cause harmful interference to radio communications. However, there
is no guarantee that interference will not occur in a particular installation. If this television does cause interference
to other electronic equipment, which can be determined by turning the television off and on, then the user is
encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and television.
- Connect the equipment into an outlet on a circuit different from that to which the television is connected.
- Consult your dealer or an experienced radio / TV technician for assistance.
Any changes or modifications not expressly approved by the party responsible for compliance may void the users
32A60-2 authority to operate the equipment.
 Safety Instr uctions
cabinet,

This TV is equipped with a three-wire grounding type plug,a plug

with a third (grounding) pin. As a safety feature, this plug will only
fit into a grounded power ourlet. If you are unable to insert the plug
into the outlet, contact your electrician to replace the obsolete outlet.
Do not defeat the safety purpose of the grounding-type.
;

P the
at

To protect

32A60-3
Safety Instr uctions
qualified service technician.

technician

32A60-4
 Table of Contents
Audio Settings
Safety Instructions ................................................................................................ 2-4 Bass / Treble / Balance ......................................................................................... 20
Table of Contents ................................................................................................. 5 Audio Language .................................................................................................... 20
Introduction / Whats In the Box ........................................................................... 6
Remote Control
Remote Control - Battery Install ........................................................................... 7 Date & Time Settings ....................................................................................... 21
Remote Control Overview .................................................................................... 8
TV Overview Setup Settings
Side Panel ............................................................................................................ 9 Menu Language .................................................................................................... 22
Rear Panel ........................................................................................................... 10 Transparency.... .................................................................................................... 22
Pedestal Stand Removal / Wall Mounting ............................................................ 10 Aspect Mode .......................................................................................................... 22
Noise Reduction ................................................................................................... 22
DLC ...................................................................................................................... 22
Restore Default .................................................................................................... 22
Closed Caption Settings .................................................................................... 23
Installation
Advanced Setting for PC ....................................................................................... 24
Connection to Coaxial / RF Cable / Antenna ...................................................... 11
Parental Control - USA......................................................................................... 25
Satellite Box / Connection to HDMI Inputs ............................................................ 12
Parental Control - Canada .................................................................................... 26
Connection to Component (Y Pb Pr) Input .............................................................13
Connection to AV Composite Input........................................................................ 14
TV Settings
Connection to a Personal Computer ..................................................................... 15
Favorite ................................................................................................................. 27
Connection to a Receiver / Amp ........................................................................... 16
Add / Delete ............................................................................................................27
Initial TV Setup
Connection to the Power Source ...........................................................................
. 17 Channel Label ...................................................................................................... 27
DTV Signal ........................................................................................................... 27
Initial Setup Wizard ............................................................................................... 17
Aspect Modes ........................................................................................................ 28
TV Channel Setup & Channel Auto Scan ............................................................. 18
USB Modes ........................................................................................................ 29

Picture Settings
Specifications ..................................................................................................... 30
Contrast ................................................................................................................ 19
Troubleshooting .................................................................................................. 31
Brightness ............................................................................................................. 19
Index .................................................................................................................... 32
Color ..................................................................................................................... 19
Tint ........................................................................................................................ 19
Sharpness ............................................................................................................. 19
Color Temperature ................................................................................................ 19

32A60-5
Introduction Thank you for purchacing the energy efficient 32A60 LCD television. It has been designed to
offer todays high definition television experience. With a display resolution of 1366x768
you are assured of one of the finest quality televisions available today.

Your television provides both analog and digital inputs including two (3) High Definition
Multimedia Interface (HDMI) interconnects for the purest audio and video digital signal
when connected to compatible HD sources (ie: HD set-top box, high definition DVD player
or gaming console).

We recommend that you read the user manual thoroughly before use to familiarize yourself
with the installation and adjustment options available to you; thereby, enjoying all the
features of the 32A60 for many years to come.

SLEEP DISPLAY

- INPUT

EXIT
32A60

ENTER
Whats In The Box

LAST

The 32A60 LCD package includes

MUTE

AUDIO MTS CCD RETURN

PICTURE

the following items. Save the carton

REP CH.LIST TEMP USERS MANUAL
GUIDE FAV FREEZE ASPECT 32 LCD TELEVISION

& packing for future shipping

. QUICK START GUIDE

Pedestal Base / Hardware CHILD SAFETY

Screws ( 6 ) Remote Control User manual

Remote Control AAA Batteries x 2 Quick Start Guide
AAA Batteries ( 2 ) Child Safety
Quick Start Guide
User Manual
Child Safety
Audio / Video Cable
Power Cord

Audio / Video Cable Pedestal Base

Power Cord Screw
32A60-6
 Remote Control
Your remote control handset is powered by two (2) AAA type batteries

Battery Install
To insert the batteries, turn the remote Place two (2) AAA batteries into the battery Replace the cover.
control over and remove the battery compartment with the + and - ends facing the
cover. correct way as shown in the battery compartment.

When pointed towards the television, the effective range of the remote is approximately 16 feet from the
front of the TV IR receiver and at an angle of no greater than 30 to the left / right or 20 up / down.

To avoid possible damage from battery chemical leakage, remove the batteries if you do
not plan to use the remote control for an extended period of time. Do not mix batteries of
different age and/or type. Always discard used batteries safely.

Do not expose the remote control to liquids, direct sunlight or sources of excessive heat.

The IR receiver on the TV will not work properly if the set is in direct sunlight or an object is in the path
between the remote control and the IR receiver on the front of the TV. 30 30
SLEEP DISPLAY

IR Receiver - INPUT

EXIT

ENTER

LAST

MUTE

NOTE: Improper use of batteries can result in a chemical leakage or explosion. 32A60-7
AUDIO MTS CCD RETURN

PICTURE

REP CH.LIST TEMP

GUIDE FAV FREEZE ASPECT

32A60
Remote Control
1 3 2

4 5

6 7

9 12
10
Overview

11

13 14 15 16

17 18 19 20

21 22 23 24

25 26 27 28

32A60-8 NOTE: When using the remote

control, point it directly at the TV.
 TV Over view
1. Input - After connecting your DVD, cable box, etc., select the
appropriate input source to view. Press the INPUT button to display
the input options. Press the CH+ / CH- buttons to highlight the input
source and press the VOL+ button t o select.

INPUT SOURCE
INPUT SOURCE

TV
AV
Component
HDMI 1
IR Receiver HDMI 2
A soft blue light illuminates HDMI 3
when the television power is on. VGA
USB

2. Menu - Press the MENU button to display. Press VOL+ to

select from the 6 menu options available. Press the CH+ / CH-
buttons to select a feature from the selected menu then press the
VOL+ / VOL- buttons to adjust the volume settings.

Front & Side Panel

3. Channel (CH+ / CH-) - Press the CH+ / CH- buttons to select
a channel in the TV mode.

4. Volume (VOL+ / VOL-) - Press the VOL+ / VOL- buttons to

1
2 adjust the volume up or down.
3
4
5
5. Power - Press the POWER button to turn the LED display ON /
OFF (standby). When the power is on, the blue LED illuminates. The
screen image will appear within a few seconds.

Side Panel

32A60-9
TV Over view Wall Mounting Removal of TV Pedestal
for Wall Mounting
It is recommended that you call your local TV
dealer or a licensed contractor to secure the To remove the pedestal base from the
television to the wall using a suitable VESA television, unscrew the (5) Philips head
400 x 200 wall mount hardware. screws and remove the entire assembly.

5
Component&Audio in
Component&Audio in

Y Pb Pr L R Y
Pb Pr L R

3 L R SPDIF SPDIF
USB 3 V L R L R AC IN
AC IN USB Audio out
V L R
Audio out

2 3 4 6 7 8 9 10 1

1. AC Power Plug Insert power plug during initial setup. 6. AV Input - Connect an external device to the composite VIDEO
& Pedestal Removal

(Y) and AUDIO (L / R) output jacks found on most video equipment.

2. USB Input Port - Connect to portable USB device such as USB
flash / hard drive (max storage capacity 400GB), supports MP3 and JPEG. 7. L / R Audio Out - Connect to audio receiver.
3. HDMI Inputs (3) - Connects to digital AV equipment that feature HDMI
connectivity. HDMI supports enhanced high definition 8. SPDIF - Connect an optional coaxial digital cable (not included) through
Rear Panel

video and up to 7.1 - channel digital audio all from one cable. Recommended a compatible amp / receiver to enjoy superior audio sound.
for best performance. HDMI cable not included.
9. RF Input - Connect an antenna or cable connection
4. PC IN - VGA Input - Connect an optional VGA cable (not included) for television reception.
from your personal computer . Note: Use an outdoor antenna, cable or satellite for best reception.

PC Audio Input (3.5mm) - 3.5mm audio cable (not included)

for sound. 10. Headphone Jack - Connect a stereo headphone (3.5mm not included)
5. Component Y Pb Pr Input - Connect to an AV device that for private listening.
features component (Y Pb Pr L R) video and audio output jacks.

32A60-10
 Installation
Connection to Coaxial / RF Cable / Antenna
TV REAR PANEL

Component&Audio in

Y Pb Pr L R

USB 3 V L R L R SPDIF AC IN
Audio out

Ant./Cable
Wall Outlet

Coaxial / RF Cable (not included)

How to connect to an indoor or rooftop antenna

Connect the RF coaxial (75 ohm) cable from your existing roof top / indoor
antenna, or wall outlet. Finger tighten the Coaxial / RF Cable end to the
TV input on the rear panel.

& Cable / Satellite

Connection to Antenna
See pages 17-18 for TV setup and Channel Auto Scan.

Tune to TV programming directly from the television tuner.

32A60-11
Installation Digital Cable / Satellite Set Top Box Optional HDMI cable ( not included )

Component&Audio in

Y Pb Pr L R

3 L R SPDIF AC IN
USB V L R
Audio out

Cable / Satellite set top box

How to connect with Digital Cable / Satellite Set Top Box
Connect the RF coaxial (75 ohm) cable from the video outlet of your cable /
Satellite box to the RF input on the TVs rear panel. Select Ch. 3 or 4 on the RF / Coaxial Cable ( not included )
TV and select a channel.
For greater performance, if possible, use component or an HDMI installation shown below.
Refer to your set top box user manual.
See pages 17-18 for TV setup and Channel Auto Scan.

Connecting to an HD Set-Top Box or Blu-Ray DVD Player Using HDMI

TV REAR PANEL
Digital set top box, gaming console,
or Blu-ray / HDMI interface

USB 3 HDMI
Connection to HDMI Inputs

Optional HDMI cable(not included)

For BEST video performance

Connect to external equipment that offers HDMI, an uncompressed, all digital video / audio
interface found on todays HD digital set top boxes and Blu-ray players. Use of this pure digital INPUT SOURCE
INPUT SOURCE
technology offers enhanced high
There are three (3) HDMI inputs available for use with devices such as an HD set top box, TV
gaming console, and Blu-ray player. AV
How to Connect HDMI Component
From your external digital equipment, connect an HDMI cable from the HDMI 1
HDMI output to the HDMI input on the TVs rear panel.
HDMI 2
How To Use HDMI
HDMI33
Press the INPUT button on the remote control. Use arrow buttons
to highlight the input to view (HDMI 1, 2,3) then press ENTER. VGA
USB
32A60-12
 Installation
Connecting External Equipment to Component Video IN (Y Pb Pr)
TV REAR PANEL

Component&Audio in

Y Pb Pr L R

USB 3 V L R L R SPDIF AC IN
Audio out

For BETTER video performance Optional

Component cables
(not included)
Connect to external equipment that features component video output jacks
Digital set top
for better performance. Use the Component Y Pb Pr video and audio
inputs with a set top box, gaming console or DVD player. box, gaming
console or DVD

How to Connect Component

When connecting external equipment to your television, match the colors
of the connecting jacks (Video: Blue, Green, Red; Audio: White / Red ).

YPbPr Input
Connection to Component
INPUT SOURCE
INPUT SOURCE
Connect the optional component video cables (blue, green, red) (not included)
from the video output jacks (Y, Pb, Pr) on your external equipment to the TV
Component Y Pb Pr input on the TVs rear panel.
AV
Connect white / red audio cables for sound from the audio (L/R) output
jacks on your external equipment to the Component & Audio in L/R input Component
jacks on the TVs rear panel.
HDMI 1
HDMI 2
How to Use
Press the INPUT button on the remote control. Use the buttons
HDMI 3
to highlight the input to view (Component) then press ENTER. VGA
USB

32A60-13
 Installation Connecting External Equipment to AV Composite IN on your television
TV REAR PANEL

Component&Audio in

Y Pb Pr L R

3 L R SPDIF AC IN
USB V L R
Audio out

Audio Video Cable (not included)

For GOOD video performance

Connect to external equipment using the included optional video and audio cables. Set top box, gaming console, and DVD
Composite output jacks are available on most set top cable/satellite boxes and DVD players.
(HDMI and Component connections are recommended for the best performance).
Connection to AV
Composite Input

How to Connect Composite AV

When connecting external equipment to your television, match the colors of the
connecting jacks (Video: Yellow - Audio: White & Red).

Connect the yellow video cable from the video output jack on your external A/V
INPUT SOURCE
INPUT SOURCE
equipment (i.e.: DVD player, set top box) to AV input on the TVs side panel.

Connect the white / red audio cables for sound from the audio (L / R) output jacks
TV
on your external equipment (i.e.: DVD Player, set top box) to the AV (L / R ) jacks
on the TVs rear panel.
AV
Component
HDMI 1
How to Use
Press the INPUT button on the remote control. Use the buttons to
HDMI 2
highlight the input to view (AV) then press ENTER .
HDMI 3
VGA
USB
32A60-14
 Installation
Connecting a Personal Computer with VGA to Your Television
Component&Audio in

Y Pb Pr L R

3 L R SPDIF AC IN
USB V L R
Audio out

VGA & Audio Cable (not included)

Recommended computer display resolution: 1920 x1080 @ 60 HZ

How to Connect a PC INPUT SOURCE

INPUT SOURCE
Connect using an optional male to male VGA cable (not included) from
your PC to the VGA input on the TVs rear panel. TV
AV
How to Connect Audio Sound Component
Connect an optional 3.5mm audio cable (not included) from the computers HDMI 1
mini audio output jack to the audio input on the TVs rear panel. HDMI 2
HDMI 3
VGA
VGA

Personal Computer
Connection to a
How to Use USB
Press the INPUT button on the remote control. Use the buttons
to highlight the VGA input and press the ENTER button.

NOTE: If your PC uses a standard signal mode, the screen will adjust automatically.

Connecting to an amplifer or home theater system

TV REAR PANEL

Y
Component&Audio in

Pb Pr L R
How to Connetc Audio Out
USB 3 V L R L
Audio out
R SPDIF AC IN
Connect the TVS Audio (L/R) output jacks to an Audio Amplifier
using an audio patch cable with RCA cable ends (not included).

Audio cables (not included) NOTE: The speakers of this TV still will output audio at this time.

Audio Amplifier

32A60-15
Installation Connection to a Home Theater Audio System
TV REAR PANEL

TV REAR PANEL Component&Audio in

Y Pb Pr L R

3 L R
SPDIF
Component&Audio in USB V L R AC IN
Audio out

Y Pb Pr L R

3 L R SPDIF AC IN
USB V L R
Audio out

optional cables (not included)

Optional digital cable (not included)

Prologic
Surround Receiver
For best audio performance
Front Left Front Right

Connecting to a Home Theater System

Speaker Speaker

Digital set top box, gaming Center Channel

Digital audio can deliver optimal 2 - channel stereo or 5.1 surround sound with console or DVD

Five discrete full range channels plus a separate channel for a subwoofer.
Dolby Surround
Connection Illustration

Enjoy optimal sound reproduction from your system with a digital Surround Left Surround Right

amplifier that incorporates a digital audio input.

Speaker Speaker

Connecting to a Stereo
Connect an optional digital cable (not included) directly to the televisions
SPDIF audio output for audio output from all input sources except VGA.
Connection to a Home

(VGA input does not support digital audio) Enjoy realistic sound from your home theater system through a stereo / receiver
amplifier or Prologic sound system when connected to your AV equipment.

How to Set up Digital Output

Press the MENU button on the remote control. NOTE: When audio cables are connected to a stereo / receiver amplifier, no audio
Theater System

sound will be heard from the TVs built-in speakers.

Press the right button to select AUDIO.
Example: The diagram illustrates the connection of audio cables directly from
Press the button to highlight SPDIF type. Press to select your AV equipment (like a cable box) to a stereo receiver instead of using the
Raw or PCM* audio (L/R) jacks on the TVs rear panel.

Lock Channel

How to Use (Video)

Press the appropriate INPUT button on the remote control. Use
arrow buttons to highlight the input source to view and then press ENTER .

How to Use (Audio)

Select the appropriate input from your audio equipment.
32A60-16
*NOTE: Refer to the User Manual from your home theater equipment for recommended audio settings.
 TV Setup
Connection to Power Source
Component&Audio in

Y Pb Pr L R

3 L R SPDIF AC IN
USB V L R
Audio out

Power Cord

AC INPUT

How to connect with Power Cord

Connect the power cord to the rear of the TV and plug power cord into wall recepticle.

Initial Setup Wizard

Initial Setup Wizard Setup Wizard
Menu Language English
Air/Cable Cable
After connecting the antenna o r cable connect ion to you r TV, turn the te levision on
The Quick Setup Wizard will display on-screen. Select your preferred picture setting Cable System STD
followed by antenna opt ions. Then perform an Auto Channe l Scan to store local
Auto Scan
broadcast channels in the TV tuner memory.

How to Navigate Sele ct Mov e E x it

M ENU

Menu Language
Press the button to highlight M enu Language and then p ress the buttons to select an on - screen display (OSD) language.

Cable or AIR
Press the button to h ighlight CAB LE o r AIR based on you rantenna connection .

Press the button to select Auto Scan and press ENTER . Note: when Cab le is se lected, AUTO is the

recommended sett ing. Othe rwise, p ress the button to select the Cab le Syste m : ST D > IRC > HRC > Auto .

16
32A60-17
TV Setup Select the antenna option and perform an Auto Channel Scan to receive and store broadcasted television channels into the TV tuner memory.

To Enter the TV Mode:

Press the MENU button
Using the buttons; scroll to highlight the TV mode
Press the button to highlight; CABLE or AIR

Cable Mode Air Mode

IMPORTANT NOTE: Select AIR when the TV is
Cable and Satellite users WITH connected to an indoor / outdoor
a set top box do not need to run Lock Channel Lock Channel
antenna.
Channel Auto Scan. Connect the
set top box to one of the available
TV inputs and tune the TV to Press the button to
channel 3 or 4 for viewing. See highlight AIR.
pages 12-14 for connection details.

Cable WITH set top box Press the button to select

Auto Scan then press the
Use the button to button twice to start the Auto
highlight CABLE and press ENTER. Channel Scan.

Cable WITHOUT set top box

AutoChannel Scan may
& Channel Auto Scan

Select CABLE for a TV connected Lock Channel Lock Channel

to Cable or Satellite service take several minutes to

complete the process.
TV Channel Setup

WITHOUT using a set top box.

Use the button to
highlight CABLE.

Press the button to select

AUTO SCAN. Press the ENTER
button and CABLE SYSTEM will be
displayed next.

Press the button to

select STD > IRC > HRC > Auto
(Auto is recommended). Lock Channel Lock Channel

Press the button to select

Auto Scan and press ENTER .

Auto
Channel Scan may
take several minutes to
complete the process.

32A60-18
 Menu Adjustments
How to Navigate:
Press the MENU button on the remote control. Navigate using buttons to select PICTURE. Press the down button to
highlight PICTURE MODE, then press the button to select your viewing preference from 4 options:
STANDARD > DYNAMIC > MILD > USER. The STANDARD setting is recommended for most viewing environments. Depending on
the ambient light level in the room, you may find one of the other options more pleasing.

To make more critical adjustments based on your own preferences in PERSONAL:

Contrast
Press the button to highlight Contrast. Use the
buttons to increase or decrease contrast intensity.

Brightness Lock Channel

Press the button to highlight Brightness. Use the

buttons to increase or decrease overall brightness.

Color
Press the button to highlight Color. Use the

Picture Settings
buttons to increase or decrease color intensity.

Tint.
Press the button to highlight Tint. Use the
buttons to adjust the tint colors toward green or reddish tint.

Sharpness
Press the button to highlight Sharpness. Use the
buttons to view softer or crisper edges in the picture.

Color Temperature
Press the button to highlight your Color Temperature
preference. Use the buttons to select COOL
(more Bluish tone), NORMAL or WARM (less Bluish tone) settings.

32A60-19
Note: When adjustments are complete, you may select another menu by pressing the MENU button.
Menu Adjustments The AUDIO menu offers options to make audio enhancements for listening through the built-in speakers or to select digital audio options
when connected to a Digital receiver though the Digital Audio Output.

How to Navigate:
Press the MENU button on the remote control. Navigate using the buttons to select AUDIO. Press the button to highlight
SOUND MODE and then press the button to select your sound preference from 4 factory options:
PERSONAL > STANDARD > MUSIC > MOVIE.

To make more critical sound adjustments based on your own preferences in the PERSONAL options:

Bass
Press the button to highlight Bass. Use the
buttons to increase or decrease low frequency Bass intensity.
Lock Channel

Treble
Press the button to highlight Treble. Use the
buttons to increase or decrease high frequency Treble intensity.

Balance Surround
Press the button to highlight Balance. Use the
buttons to balance the sound between the left or right speaker.
Audio Settings

Surround
Press the button to highlight Surround. Use the
buttons to select between; ON > OFF.

SPDIF
Press the button to highlight SPDIF. Scroll using the buttons
to select between PCM (Analog Audio) > RAW and (Digital Audio). See page 15. Audio Language
The default Audio output setting is Digital. No other option is available on most Press the button to highlight Audio Language.
TV models Scroll using the Navigation buttons to select an
alternative language broadcast (if available). Choose from:
English > Spanish > French.

Note: This feature is not available when text is

grayed out.

You may select an alternative language using the

remote control by pressing MTS .

32A60-20
Note: When adjustments are complete, you may select another menu by pressing the MENU button.
.
 Menu Adjustments
The TIME menu includes adjustments for the settings of your local time zone and daylight savings time. The clock will adjust automatically after
you perform the Channel Auto Scan of available broadcast channels in your area. (See page 18 for TV Setup)

How to Navigate:
Press the MENU button on the remote control. Navigate using the buttons to select TIME .

Press the button to highlight the Sleep Timer. Then press the
button to select the amount of time to view before the television timer turns
the set off: 5 Min > 10 Min > 15 Min > 30 Min > 45 Min > 60 Min > 90 Min > 120
Min > 180 Min > 240 Min > OFF. Lock Channel

Press the button to highlight Time Zone. Then press the

button to select between: EASTERN > CENTRAL > MOUN-
TAIN > PACIFIC > ALASKA > HAWAII.

Date & Time Settings

Press the button to highlight Daylight Savings Time.
Navigate using the buttons to turn this feature on or off.

Note: This feature is not available when text is grayed out.

32A60-21
Note: When adjustments are complete, you may select another menu by pressing the MENU button .
Menu Adjustments In the SETUP menu, you may change the initial setup preferences that include settings for language, menu display, computer monitoring,
closed captions, enhancement of contrast details in the picture and resetting your TV back to its factory default settings.

How to Navigate:
Press the MENU button on the remote control. Navigate using the buttons to select SETUP . Enter the display options by
pressing the down button to highlight the Menu Language or other options, then press the button to select the menu choice.

Languages Noise Reduction.

Other languages include Navigate using the
Spanish and French. Navigate buttons to reduce video noise: Channel
using the buttons to
Channel Lock
OFF > Weak > Middle > Strong.
Lock

select a different menu language.

DLC DLC

Transparency. DLC.
Navigate using the The DLC feature provides
buttons to turn OFF or ON
Setup Settings

Lock Channel
noticeable contrast detail Lock Channel

the translucent effect of the enhancement.

User menu. Navigate using the
buttons to select; OFF > ON.

DLC DLC

Aspect (Zoom Mode) .

Navigate using the Restore Factory Defaults.
buttons to select the viewing Lock Channel
Press the button to Channel
Lock
aspect to be displayed: automatically reset all current
Normal > Wide > Zoom > adjustments back to their original
Cinema. factory settings.

The Aspect feature is also

available on the remote control. DLC DLC
(See page 28)

32A60-22
NOTE: Closed Caption and Advanced are features described on the following pages.
The SETUP menu includes adjustments for activating the Closed Caption (CC) feature for display on the television and customization of the CC display

Menu Adjustments
types and font styles.

How to Navigate:
Press the MENU button on the remote control. Navigate using arrow buttons to select SETUP .
Press the arrow button to highlight Closed Caption.

Press the arrow button

to highlight Advanced
Lock Channel Selection. Navigate using Lock Channel

the buttons to
select Service 1-6.

Press the button to

highlight the CC Mode. Press the button to
Navigate using the Lock Channel highlight Option. Press the Lock Channel

buttons. Select Off > On button to enter a menu option to

Closed Captions
> CC or Mute. customize text fonts, colors
and opacities.

Press the button to Lock Channel

highlight Basic Selection.

Navigate using the
buttons and select CC 1-4,
Text 1-4.

Note: When adjustments are complete, you may select another menu by pressing the MENU button. Features are not available. 32A60-23
when text is grayed out.
PC Menu Adjustments In the SETUP menu, you may adjust the position of images displayed on screen once you connect your PC. The recommended resolution setting
is 1366 x 766. For use with a laptop computer, refer to the owners manual for instruction on proper display output.
If your PC system uses a standard signal mode, the TV screen will adjust automatically. Connect an optional 3.5mm audio cable (not included)
for stereo sound. See page 15 for details.

How to Navigate:
After connecting to a PC, press the VGA button on your remote control. Press the MENU button on the remote control and navigate using
The buttons to select SETUP. Access the position adjustment options by pressing the button to highlight Advanced. Then
press the button to select from the following options.

Highlight Clock. Navigate

using the buttons
to control the width of the
Lock Channel image. Lock Channel

Highlight H-Pos. Navigate Highlight Phase. Navigate

Advanced Settings

using the buttons to using the buttons

adjust the position of images Lock Channel to improve focus and image Lock Channel

displayed from side to side. stability.

Highlight V-Pos. Navigate Highlight Auto. Press the

using the buttons to button to automatically
adjust the position of images Lock Channel
adjust the display to the best Channel
displayed up and down. setting. When prompted, select
Lock

Yes to confirm.

32A60-24
 Menu Adjustments
In the PARENTAL menu, you may block television and movie programming based on TV ratings and Motion Picture Association of America guidelines.
To gain access and select your preferences within the Parental Control menu, make certain your input selection is set to TV.

How to Navigate:
Press the MENU button on the remote control. Navigate using the buttons to select PARENTAL. Access the rating options by pressing the button
to highlight ENTER PASSWORD. Enter your 4 digit password code. The factory default code is 0000 unless you have previously changed it.
See page 24 for information on how to change your password.

To set parental controls for

television programming or DVD
Lock Channel Channel
movies, press the buttons to
Lock
highlight US (United States).
Navigate using the buttons
to highlight the TV / MPAA menu.

To change the password, Highlight TV, then press the

press the button to display button to enter the TV

Parental Control - USA

the screen to enter your new ratings menu to select your
preference.
Lock Channel Channel
password, then confirm again.
Lock

(not illustrated)

TV-Y Appropriate for all children

TV-Y7 Appropriate for all children over 7
TV-G General Audience
TV-PG Parental Guidance Suggested
TV-14 Parents Strongly Cautioned
TV-MA Mature Audience Only

To make changes to your Highlight the MPAA menu then

PARENTAL control settings, press the button repeatedly to
highlight the SYSTEM LOCK select your movie rating preference.
setting then press the Lock Channel
Lock Channel

button to turn the system ON.

G - General Audience
PG - Parental Guidance Suggested
PG 13 - Parents Strongly Cautioned
R - Restricted
NC17 - No One Under 17 Permitted
X - Adults Only
32A60-25
NOTE: Features are not available when text is grayed out.
Menu Adjustments In the PARENTAL menu, you may block television and movie programming based on Canadian TV and movie rating guidelines. To gain access
and select your preferences in the Parental Control menu, make certain your input selection is set to TV.

How to Navigate:
Press the MENU button on the remote control. Navigate using the buttons to select PARENTAL. Access the rating options by pressing the button
to highlight ENTER PASSWORD. Enter your 4 digit password code. The factory default code is 0000 unless you have previously changed it.
See page 24 for information on how to change your password.

E Appropriate for everyone

Navigate using the button to C Appropriate for all children
highlight CANADA ENGLISH C8+ Appropriate for everyone 8 years old and up
then press the button G General Audience
repeatedly to select your ratings Lock Channel PG Parental Guidance
preference. 14+ Appropriate for Children over 14 years old
18+ Mature Audience Only
Parental Control - Canada

Navigate using the button to E Appropriate for everyone

highlight CANADA FRENCH G General Audience
then press the button 8 ans+ Appropriate for Children 8 years old and up
repeatedly to select your ratings Lock Channel 13 ans+ Appropriate for Children 13 years old and up
preference. 16 ans+ Appropriate for Children 16 years old and up
18 ans+ Mature Audience Only

32A60-26 Note: When adjustments are complete, you may select another menu by pressing the MENU button.
The TV menu provides the setup / changes of your television to receive broadcast channels, store your favorite channels, add or skip channels in memory

Menu Adjustments
and label or name channels. For antenna and Auto Channel Scan setup, please refer to page 18.

How to Navigate:
Press the MENU button on the remote control. Navigate using the buttons to select TV. Press the button to highlight your preferences.

Highlight FAVORITE to add channels to

your Favorites memory list. Navigate using
the buttons to select channels Lock Channel
to be added or deleted from your favorites list. Lock Channel

Press the ENTER button to add or delete a

channel. A checkmark indicates a channel
has been added. You may also display your
list of FAVORITE channels by pressing the
FAV button on the remote control.

Press ENTER To Change

Highlight ADD / DELETE to select or skip

a channel already in memory. Navigate using
the buttons to access the

TV Settings
Lock Channel

list of available channels. Press ENTER to Lock Channel

change the channels status. A checkmark

indicates a channel has been added to memory.

Press ENTER To Change

Highlight CHANNEL LABEL to name or

rename a broadcast channel. Navigate using
the button to enter the screen menu
to re-label a channel. Use the buttons Lock Channel Lock Channel

to spell out each letter, number or character.

Use the buttons to advance to the next space.

NOTE: The DTV SIGNAL is a measurement

of signal strength for the current channel 32A60-27
viewed.
ASPECT Modes The ASPECT function offers several viewing display options on the 16:9 screen. Press the ASPECT button to cycle through the following
widescreen settings.

1. NORMAL
The Normal aspect is recommended for viewing native widescreen content
Press ASPECT to cycle and undistorted 4:3 images.
through the following widescreen
settings

2. WIDE
ASPECT

Stretches certain 4:3 content and may reduce the black bars.This aspect
will also cause images to appear shorter and wider

3. ZOOM
Stretches the image both vertically and horizontally to fill the
screen when viewing widescreen content. The zoom effect will
also crop images somewhat.

4. CINEMA
When viewing 4:3 content, Cinema mode will fill the entire
screen eliminating the side black bars. It may also eliminate or
reduce black bars on certain widescreen movies.

32A60-28
 USB Modes
1.Press the INPUT button on the remote control to display the Input menu. Use the
buttons to select USB.
2.Use the buttons to highlight an individual USB option.

USB
Photo Music c:\ 1.jpg
Press the buttons to select Photo,
c:\
and then press the ENTER button to enter. 1.jpg
2.jpg
3.jpg

Select the option you want to play using the

Navigation buttons.
Press EXIT button to go back. Play File :4 011/013 730x484 267.6KB
Total size:3.7GB
Unused size:658MB Select Move Repeat

Press the button to select Music, USB

and then press the ENTER button to enter. Photo Music c:\ 1.jpg
c:\ 1.mp3
1.mp3
Select the option you want to play using the 2.mp3 Title:
Artist:
3.mp3
Navigation buttons. Album:
Year:
Bit Rate:128kbps
Press EXIT button to go back. Play:

Play File :3 011/013

Total size:3.7GB
Unused size:658MB Select Move Repeat

To operate this TV using the remote control provided by your Cable / Satellite
provider, follow the programming instructions included with the providers
remote control and input the following codes when prompted;
-For Comcast or DirecTV remote controls, input the code- 10030.
-For AT&T ( U-verse ) remote Controls, input the code- 1043.
-For RCA Universal Remote Controls, input the code- 0030.
32A60-29
 Display LCD

Size (inch) 31.5 Diagonal

Aspect Ratio 16:9

Digital Compatibility 480i / 480p / 720p / 1080i / 1080p

Resolution 1366 x 768

Brightness (cd/m2) 450

Dynamic Contrast Ratio 1200:1

Vertical Viewing Angle (degrees) 178

Horizontal Viewing Angle (degrees) 178

Maximum Colors (millions) 16.7M

Power Consumption 140Watts

Audio Power 2X6W

Dimension without Pedestal Installed 31.3 x 3.74x 20.2inches

Weight without Pedestal 25.3lbs

Input Connections Composite Video (1)

Y Pb Pr (1)
HDMI (3)
RF (1)
SPDIF Digital Audio Output (1)
PC/VGA (1)
PC Audio IN (3.5mm) (1)
Headphone Jack (3.5mm) (1)
USB (1)
32A60-30
 Troubleshooting
Check for a possible solution to a symptom before contacting a customer service representative.

Symptom Possible Solutions

Check the video installation of your external A / V equipment.

No color See pages 10-15.

Cannot receive certain Perform Channel Scan to add channels into the TV tuner memory.
channels through the See page 18.
antenna Readjust your antenna and retry Auto Channel Scan.
Signal from the TV station may be weak in your area.

Perform Channel Scan to add channels into the TV tuner memory.

See page 18.
TV signal is blocked on certain Check whether the channel was deleted. See page 27.
channels Check parental control settings. See pages 25, 26.
Restore default settings. See page 22.

Video noise or choppy picture Readjust the antenna. Keep the TV away from electronic noise sources such
as neon lights and microwave appliances.

Check that connected audio cables are fully inserted.

Verify you have selected the correct audio source from your
No sound amplifier. See page 16.
Mute function may be enabled, press mute on the remote to disable.

The Text option is enabled and no text is available.

Black box on screen Press the CCD button on the remote control to turn off.

Batteries in the remote control may need replacing.

No power Re-attach the AC plug to wall outlet.

Digital TV channel signal strength may be weak, try another channel.

Press INPUT button to verify the desired input selected.
No picture
Re-connect the antenna or cable wiring.
Restore default settings. See page 22.

Replace batteries with new ones.

Remote control does not
Check that battery polarity is correct.
function
Point remote directly at the TVs IR receiver. See page 7.
32A60-31
 Index A
Add/Delete channels 27
E
Exit 8
Picture Modes
Power Conection
8, 19
17
Advanced mode 24
Advanced selection 23 R
Air/Cable 11, 17-18 F
Favorite Channels 8, 27 RAW 16
Antenna installation 11
Ratings (TV, Movie) 25-26
Arrow buttons 8
Aspect Mode 8, 22, 28 Remote Control 7-8
G RF Input 10, 11
Audio Setup & Adj. 8,16, 20
Guide 8 Restore Default setting 22
Audio Language 20
Reset Password 25
Roof Antenna 11
H
HDMI Inputs 12
B Headphone 10
Balance Adjustment 20 Home Theater 16 S
Bass Adjustment 20 Satellite Installation 11-14
Batteries 7 Sleep Timer 8, 21
Brightness Adjustment 19 I Sharpness adjustment 19
IR Receiver 7, 9 Standby 8-9
Input 8-9, 12-15 Speakers (built-in) 16, 20
C
CCD (Closed Caption) 8, 23
L
Cable Installation 11, 17-18
Canadian Ratings 26 Languages 20, 22
Channel Up/Down 8-9 Last 8
Channel Auto Scan 17-18 LED light 9 T
Channel Label 27 Time Zone 21
Channel List 8 Tint Adjustment 19
Clock 21, 24 M Treble Adjustment 20
Cinema Zoom 28 Master Power 9-10 Transparency 22
Coaxial Digital Output 16 MEMC 19
Color Adjustment 19 Menu 8-9, 17-27
Color Temperature 19 MTS 8
Composite Input 14 Motion Technology 60Hz 6
Component Input 13 Mute 8 V
Computer Connection 15, 24 Movie Ratings 25-26 Video Adjustment 19
Contrast Adjustment 19 Movie Mode 19 Volume Adjustment 8-9
VGA Installation & Adj. 10, 15, 24

N W
Normal Aspect 28 Wall Mounting 10
Noise Reduction 22 Wide Aspect 28
D Number Buttons 8
Dash ( - ) 8
Daylight Savings Time 21
P XYZ
Default Settings 22
Digital Cable 11 Parental Control 25-26 Y Pb Pr 10, 13
Digital Set Top Box 11 Password 25-26
Digital Audio 16 Pedestal Stand Removal 10
Display 8 PC 10, 15, 24
Display Modes for PC 15 Phase 24
DLC 22
32A60-32
LIMITED ONE-YEAR TELEVISION WARRANTY
We warrant this product to be free from defects in material and workmanship under normal
use for a one-year period from the original date of purchase from an authorized VIDAO
dealer. We will repair or replace the unit free of charge should it become defective under
this warranty, providing you, the original purchaser, submit proof of purchase (sales slip)
along with the TV and all accessories.
During the one-year period from the original purchase date, we will service or exchange the
TV, at no charge. To obtain warranty service or replacement within the duration of the
one-year warranty, please return the product and all accessories to the original place of
purchase.

For technical support, the VIDAO Technical Support Center is available 24-hours a day,
7-days a week for technical assistance or troubleshooting at 1-800-936-1168.

This warranty does not cover any product which has been subject to damage due to an act
of nature, misuse, neglect, accident, abuse, commercial use, or modification of, or to, any
part of the product, including the antenna. Damage to any external media such as DVD,
CD, and/or USB or other memory devices are not covered nor is the cost incurred in
shipping the unit for warranty repair. Under no circumstances shall VIDAO be liable for any
loss (direct, indirect, incidental, foreseen, unforeseen, special or consequential) or for any
damage arising out of, or in connection with, the use of this product.

UNDER NO CIRCUMSTANCES WILL VIDAO BE LIABLE FOR ANY INCIDENTAL OR

CONSEQUENTIAL DAMAGES.

This warranty does not cover re-manufactured units, or product sold 'As Is'

This warranty is valid only to the original purchaser of the Product in the United States,
Canada, and Mexico and grants specific legal rights.