Small Tool Instruments and Data Management

Standard Digital Indicator

ABS Digimatic Indicator ID-C

Catalog No. E4330-543

Digital indicators offer dramatically improved

readability, usability and functionality
Digital indicators that offer dramatically improved ease of
ABS Digimatic Indicator ID-C
The Nakatsugawa plant is in the central industrial park of leafy Nakatsugawa city, in the Gifu
prefecture. This plant specializes in manufacturing sensor products and handles the complete
development-to-production cycle for measuring instruments such as dial gages, test indicators,
Digimatic indicators, and bore gages. It was opened in 1997 as the 12th Mitutoyo plant in Japan.
Using its state-of-the-art production techniques and facilities, this plant continues to provide
Mitutoyo products that are praised around the world and used with confidence.

ct ual ct ual ct ual

A ize A ize A ize
s s s

543-390B 543-470B 543-490B

Examples of use
ABS Digimatic indicator ID-C is a standard digital indicator. A large
LCD incorporating 11mm characters (existing products: 8.5mm) is used
to improve visibility, and three large, easy-to-press buttons are used
in the design to make operations easier to perform. In addition, this
affordable product has various measurement functions, including the
ability to perform scaling calculations, judge tolerance, hold data, and
perform general comparison measurements.

2
reading measurement values, usability and functionality

1. Large LCD 4. Functions that support measurement

The large LCD incorporates The ID-C has various functions,
11mm characters giving 1.5 including the ability to hold data,
times the character area of output data, switch the measuring Measurement value and tolerance judgment
existing products (which display 11mm direction, judge tolerance, change
8.5mm characters) making the scale factor, and a lock to prevent
measurement values much misoperation. Enlarged display of the tolerance judgment result
easier to read. Actual size (For details, see page 5.)

2. Three large buttons 5. 330 rotary display 330 330

The popular three-large-button design, which is used in products such as the
ABS coolant proof Digimatic indicator ID-N/ID-B, makes buttons easier to press The display can be rotated 330,
and operations easier to perform. allowing use at a position where you
can easily read the measurement
value.

Power switch
Application products for one-touch quick
Data output (when connected to an
external device)
Data hold (when no external device is
6. measurement
Parameter setting mode
connected) Various application products are available that enable you to perform one-touch
Count direction switching, tolerance judgment Switches between the ABS (preset) and quick measurement of the thickness of small parts, papers, felt, lenses, and
setting, resolution switching, scale factor INC (zeroset) measurement modes pipes, as well as the depth of narrow grooves on cylindrical workpieces, groove
setting, and function lock setting depth, and steps.
ABS measurement mode INC measurement mode (For details, see pages 6 and 7.)
Preset using a reference gage to measure the Zeroset using a reference gage to perform
absolute value from a measurement reference a comparison measurement of the difference
between the reference gage and measured ABS Digimatic
workpiece upright gage

Switches the measurement

mode between ABS and INC.
4.267

Press and hold the SET button ABS Digimatic

(for at least two seconds) to thickness gage
50 mm 50 mm
Measured workpiece

Measured workpiece

switch the mode.

54.267

54.267

reference reference
gage gage
ABS Digimatic
Operation in ABS (preset) measurement mode Operation in INC (zeroset) measurement mode depth gage

3. 7. The ABS (ABSOLUTE) sensor

Expanded lifting capability
The original Mitutoyo ABS (ABSOLUTE) sensor, which is capable of relocating
The lifting function that moves the spindle up and down has been expanded to the origin even after turning the power off, enables you to quickly start multi-
improve work efficiency when using the ID-C mounted on a stand. point measurement. Also, the ABS measurement mode can be restored even
For models that have a 12.7mm measuring range,
a lifting lever (special accessory) can be mounted
after measurement in the INC mode, where zerosetting
on the left or right side, improving work efficiency is possible at any position, improving work efficiency.
and smoothness of movement.
A lifting cable (special accessory) provides a maximum
of approximately 25.4mm of spindle movement (twice 8. Inspection certificate provided as standard
that of existing models). So for models that have a
Mitutoyo provides an inspection certificate that includes inspection data as
12.7mm or 25.4mm measuring range, the spindle
standard to guarantee that every product shipped is of high quality and safe
can be moved through the entire measuring range.
to use. Upon request, we can also calibrate purchased measuring instruments
(Applied to models that have a 50.8mm measuring
and issue a calibration certificate that proves traceability to national (or
range, the spindle can be retracted by approximately
international) standards for a fee. To minimize calibration uncertainty as much
25.4mm from the extended position.)
Lifting knob (special accessory)
as possible, both the inspection certificate and calibration certificate are issued
after measurement using dedicated testers developed with advanced Mitutoyo
By using a lifting knob (special accessory) fitted to measurement technologies. Note that the inspection certificate cannot be used
the the top of the spindle, you can perform full- to obtain a calibration certificate because the former does not indicate the date
stroke operation without directly touching the of purchase.
spindle. CERTIFICATE OF INSPECTION Certicate No.1234567890
Product name : Digimatic Indicator Code No. : 543-390 Model : ID-C112X Serial No. : 08123456
Graduation : 0.001mm Measuring span : 12.7mm Temperature : 20(Standard Temperature)
QC Manager : T.Kosuda

Lifting lever (finger hook)

Inspection standard : Mitutoyo standard 1)
Maximum Permissible error unit: m error
MPE of indication unit: m error (MPE) of indication
/Overall 3 2 A Overall (*) 3 +2

Standard accessory (only for models that have a measuring range of /Hysteresis 2 1 S Hysteresis 2
M 1
/Repeatability 2 passed E Repeatability 2 passed

25.4mm or 50.8mm) 1)
Method of inspection:MITUTOYO (No sign)
Based on : ASME B89.1.10M-2001
(*) Overall magnication and linearity
Judgement (: Passed ()
) 1

If dust or coolant gets into the gap between the spindle and main unit while using
Traceable to : NMIJ/AIST by JCSS No.0030. The quantizing error (1 count) is
NIST via No.821/276374-08/M9317 excluded from the specication value
+5
Errors [m]

the lifting knob, the spindle travel may become rough or the indicator may fail
0

-5
0 : UP : DOWN 1 Position(mm) 12.7

altogether. Therefore avoid using the ID-C in environments containing dust or

Mitutoyo Corporation

coolant mist.

3
ABS Digimatic Indicator ID-C

SPECIFICATIONS
Metric ISO/JIS Type
Order No. Measuring range Accuracy*[1 Hysteresis* Repeatability* Measuring force Mass Remarks
Resolution 0.001mm/0.01mm
543-390 543-390B 12.7mm 0.003mm 0.002mm 0.002mm 1.5N or less 170g
543-394 543-394B 12.7mm 0.003mm 0.002mm 0.002mm 0.7, 0.6, 0.4N or less 170g Low measuring force
543-470B 25.4mm 0.003mm 0.002mm 0.002mm 1.8N or less 190g
543-490B 50.8mm 0.005mm 0.002mm 0.002mm 2.3N or less 260g
Resolution 0.01mm
543-400 543-400B 12.7mm 0.02mm 0.02mm 0.01mm 0.9N or less 170g
543-404 543-404B 12.7mm 0.02mm 0.02mm 0.01mm 0.5, 0.4, 0.3, 0.2N or less 170g Low measuring force
543-474B 25.4mm 0.02mm 0.02mm 0.01mm 1.8N or less 190g
543-494B 50.8mm 0.04mm 0.02mm 0.01mm 2.3N or less 260g

Inch/Metric ISO/JIS Type and ANSI/AGD Type

Order No. Measuring range Accuracy*[1 Hysteresis* Repeatability* Measuring force Mass Remarks
Resolution .00005"/.0001"/.0005"/0.001mm/0.01mm
543-391 543-391B .5" .00010"/0.003mm .00010"/0.002mm .00010"/0.002mm 1.5N or less 170g
543-392 543-392B .5" .00010"/0.003mm .00010"/0.002mm .00010"/0.002mm 1.5N or less 170g
543-395 543-395B .5" .00010"/0.003mm .00010"/0.002mm .00010"/0.002mm 0.7, 0.6, 0.4N or less 170g Low measuring force
543-396 543-396B .5" .00010"/0.003mm .00010"/0.002mm .00010"/0.002mm 0.7, 0.6, 0.4N or less 170g Low measuring force
543-471B 1" .00010"/0.003mm .00010"/0.002mm .00010"/0.002mm 1.8N or less 190g
543-472B 1" .00010"/0.003mm .00010"/0.002mm .00010"/0.002mm 1.8N or less 190g
543-491B 2" .00020"/0.005mm .00010"/0.002mm .00010"/0.002mm 2.3N or less 260g
543-492B 2" .00020"/0.005mm .00010"/0.002mm .00010"/0.002mm 2.3N or less 260g
Resolution .0005"/0.01mm
543-401 543-401B .5" .0010"/0.02mm .0010"/0.02mm .0005"/0.01mm 0.9N or less 170g
543-402 543-402B .5" .0010"/0.02mm .0010"/0.02mm .0005"/0.01mm 0.9N or less 170g
543-405 543-405B .5" .0010"/0.02mm .0010"/0.02mm .0005"/0.01mm 0.5, 0.4, 0.3, 0.2N or less 170g Low measuring force
543-406 543-406B .5" .0010"/0.02mm .0010"/0.02mm .0005"/0.01mm 0.5, 0.4, 0.3, 0.2N or less 170g Low measuring force
543-475B 1" .0010"/0.02mm .0010"/0.02mm .0005"/0.01mm 1.8N or less 190g
543-476B 1" .0010"/0.02mm .0010"/0.02mm .0005"/0.01mm 1.8N or less 190g
543-495B 2" .0015"/0.04mm .0010"/0.02mm .0005"/0.01mm 2.3N or less 260g
543-496B 2" .0015"/0.04mm .0010"/0.02mm .0005"/0.01mm 2.3N or less 260g

: ANS/AGD Type
Note) Products with an Order No. suffixed B have a flat back, and other models have a back with a lug.
* Overall hysteresis and repeatability specifications are valid for normal measurement at 20C, and the quantizing error of 1 count is excluded.

COMMON SPECIFICATIONS
Display: 6-digit LCD, sign Position detection method: Capacitance type absolute linear encoder
Contact point: Spherical tip SR = 1.5mm (carbide tipped), Battery: SR44 (silver oxide button cell) 1, part No. 938882
part No. 901312 (for ISO/JIS Type) Battery life: Approximately 7,000 hours of continuous use
part No. 21BZB005 (for ANSI/AGD Type) Maximum response speed: Not restricted (except for scanning measurement)
Spindle orientation for measurement: Service temperature range: 0 to 40C
- Standard model that has a 12.7mm measuring range: No restrictions Storage temperature range: 0 to 60C
- Standard model that has a 25.4mm or 50.8mm measuring range: Normally
at any position between the spindle pointing vertically downward to the
spindle horizontal. To perform measurement with the spindle pointing above
the horizontal requires a reverse-position coil spring (special accessory).
- Low measuring force models: See 'Setting measuring force on low
measuring force models' on page 4.

4
Setting measuring force on low measuring force models
543-404/404B/405/405B/406/406B 543-394/394B/395/395B/396/396B
Weight Maximum
Spindle orientation Spring Weight Maximum
(approximately 0.1 N) measuring force
Spindle orientation Spring
(approximately 0.1 N) measuring force
Yes Yes 0.5N Yes Yes 0.8N (0.3+0.4+0.1=0.8)
Yes No 0.4N Yes No 0.6N
Pointing vertically downward Pointing vertically downward
No Yes 0.3N No Yes 0.4N
No No 0.2N No No Not guaranteed
Horizontal Yes No 0.2N Horizontal Not guaranteed
Note) Operation using configurations other than shown above is not guaranteed. Note) Operation using configurations other than shown above is not guaranteed.

DIMENSIONS
ISO/JIS Type

10.9 28.8 20 19.2 31.5 11 19.2 31.5 11

50.1

57.7

85.2
59

54

59
6
.5
46.5
54.4

0
8 -0.009

59
17

M2.5X0.45
70
84.8
21.2
7.3

0
8 -0.009
19.5

7.6

12.7mm range models

97.3
110.6

M2.5X0.45
40.8
7.3
26

8 -0.009
0
19.5

25.4mm range models

65.3

M2.5X0.45
52

7.3

50.8mm range models

ANSI/AGD Type
19.2
10.9 28.8 19 31.5 11 19.2 31.5 11
.43" 1.13" 3/4" .76" 1.24" .43" .76" 1.24" .43"

6.35
1/4"
1.97"
50.1

2.27"
57.7
2.13"

3.35"
85.2
54
2.32"
59

2.32"
59
1/4"
1.74"

6.5
44.2

50.8
2"

0
20 14.7
.79" .58"

9.52 -0.03
2.32"
2.67"

59
67.7

.375"
83.85
3.30"

Contact point 7.6

0
No.4-48 thread
17.2
.68"

.3" 9.52 -0.03

.375"
1/4"

3.74"
6.35

95
109.65
4.32"

Contact point
1/4"
6.35
42.15
1.66"
1.02"

12.7mm range models No.4-48 thread

26

0
9.52 -0.03
17.2
.68"

* is the symbol denoting American Gage Design (AGD). .375"

It shows conformance to certain dimensions for Dial Indicators, 25.4mm range models
as specied in ASME / AGD 2, intended to promote interchangeability.
Only applicable to models with an "E" sufx.
2.05"

2.62"
66.65
52

Contact point
6.35
1/4"

No.4-48 thread

50.8mm range models

5
Functions
Zero-setting function 330 rotary display Data output
(INC measurement mode) (when connected to an external device)
Preset function (ABS scale origin setting) 330 330 From the output terminal, measurement data can
The preset value can be changed easily by using be output to a PC via a compact printer, Digimatic
the SET (digit movement) and MODE (value mini processor DP-1VR, or input tool by pressing
change) buttons. the button below the display. Wireless transmission
of measurement data to a PC can also be performed
using the measurement data wireless communication
Resolution switching system U-WAVE.
(For 0.001mm or .00005" resolution models)
Models with 0.001mm resolution are capable of
displaying in 0.01mm resolution. Models with
.00005" resolution are capable of displaying in
.0001" and .0005" resolution. Select the resolution
according to the application.

Connecting cables for data output (special accessory)

1m: No.905338
Switching the direction 2m: No.905409 No.264-504
The measuring direction can be reversed. Display value holding DP-1VR
(when no external device is connected) (special accessory)

Judging the tolerance

Performs judgment (OK, +NG, -NG) according to
the set upper and lower limit values and displays
the result as a symbol. Enlarged display of the OK
and NG symbols is possible. Calculation: f(x) = Ax Input tool
Mounting the ID-C on a measuring jig and setting No.264-012-10 IT-012U (special accessory)
the calculation factor (to any value) allows direct
measurement without using a conversion table and Function locking
improves measurement efficiency. Ensures reliability of measurement by locking the
settings to prevent preset function settings from
being changed by mistake.

Measurement value and Enlarged display of the

tolerance judgment tolerance judgment result
Low battery voltage alarm
Error alarm

Standard accessories Interchangeable contact points for Mitutoyo dial gages U-WAVE
(measurement data wireless communication system)
Operation manual Digimatic mini processor DP-1VR No. 264-504
Inspection certificate Multiplexer MUX-10F, No. 264-002
1 Lifting lever (finger hook) Shell Flat Needle
Display unit EC-101D, No. 542-007
(Only for models that have a 25.4mm or 50.8mm measuring range) Various types of contact points are available.
Input tool (USB keyboard signal conversion type)
Silver oxide button cell for the monitor: SR44 1 IT-012U, No. 264-012-10
Part No. 938882 Various backs for standard Mitutoyo (2 series) dial gages
Weight (only for low measuring force models) Reverse-position coil spring
Part No. 02ACA571
Special accessories (for models that have a 25.4mm measuring range)
Part No. 02ACA773
6

2 Lifting lever (for models that have a 50.8mm measuring range)

Part No. 21EZA198 Connecting cable (1m), part No. 905338 8
(for models that have a 12.7mm measuring range ISO/JIS Type) Connecting cable (2m), part No. 905409
Part No. 21EZA199
(for models that have a 12.7mm measuring range ANSI/ADG Type)
3 Lifting cable, part No. 540774 2
4 Lifting knob 7
Part No. 21EZA105
(for models that have a 12.7mm measuring range ISO/JIS Type) 4
Part No. 21EZA150
(for models that have a 12.7mm measuring range ANSI/ADG Type) 5 No.7007
1
Part No. 21EZA197
(for models that have a 25.4mm measuring range) Recommended stands
Part No. 21EZA200 5 Dial gage stand, No. 7001 7002 7007
(for models that have a 50.8mm measuring range)
6 Granite comparator stand BSG-30, No. 215-154
7 Comparator stand BSC-30, No. 215-504
3 8 Comparator stand BSG-20, No. 215-151

6
 Application Products

ABS Digimatic Thickness Gage

For one-touch quick measurement of the thickness of small parts,
papers, and felt
Rust-free ceramic contact point and anvil (except No. 547-401)

Unit: mm

120

10
30 10
85 175
547-301 547-321

547-301 547-321 547-401

Metric ISO/JIS Type

Order No. Resolution Measuring range Throat depth Contact point and anvil Parallelism of contact point Accuracy Measuring force
and anvil
547-301 0.01mm 0~10mm 30mm 10mm flat 10m or less 20m 1.5N or less
547-321 0.01mm 0~10mm 120mm 10mm flat 10m or less 20m 1.5N or less
547-401 0.001mm 0~12mm 21mm 6.3mm flat (carbide tipped) 3m or less 3m 3.5N or less
Inch/Metric ANSI/AGD Type
Order No. Resolution Measuring range Throat depth Contact point and anvil Parallelism of contact point Accuracy Measuring force
and anvil
547-300S .0005"/0.01mm 0~.4"/0~10mm 30mm 10mm flat .0005" or less .001" 1.5N or less
547-320S .0005"/0.01mm 0~.4"/0~10mm 120mm 10mm flat .0005" or less .001" 1.5N or less
547-400S .00005"/0.001mm 0~.47"/0~12mm 21mm 6.3mm flat (carbide tipped) .0001" or less .0001" 3.5N or less
Note) 1. Changing the contact point requires total adjustment, including the main display unit. Contact Mitutoyo for advice.
2. The accuracy specification does not include the quantizing error of 1 count.
3. Left-handed models can be supplied to special order.

ABS Digimatic Lens Meter Unit: mm

Spherical contact Flat contact Flat contact Contact
Designed for measuring the thickness of point point point point
9.3

concavo-convex lenses and flat objects SR2 6

9.3

S4 spherical 4.8
The thickness of flat objects can be measured SR3 contact point
30

Anvil Anvil Anvil

by replacing the anvil. Standard accessory
Anvil adjustment: 30.3 (Throat depth)
Includes a spherical contact point. Concave lens Convex lens Moon lens 12 mm SR3 85
Metric ISO/JIS Type
Order No. Resolution Measuring range Throat depth Anvil adjustment Accuracy Measuring force
547-313 0.01mm 0~10mm 30mm 12mm 20m or less 1.5N or less
9.3

30
6
Inch/Metric ANSI/AGD Type 4.8
SR2
30

Order No. Resolution Measuring range Throat depth Anvil adjustment Accuracy Measuring force
Anvil displacement: 12 mm
SR3 85
547-312S .0005"/0.01mm 0~.4"/0~10mm 30mm 12mm .001" or less 1.5N or less
Note) The accuracy specification does not include the quantizing error of 1 count. Left-handed models can be supplied to special order.

7
 Unit: mm
Contact
ABS Digimatic Pipe Gage point

3
Designed for measuring the thickness of pipes and curved boards
Tip: 3.5 Effective
throat
depth Anvil
20
21
85
Metric ISO/JIS Type
Order No. Resolution Measuring range Throat depth Minimum inside Accuracy Measuring force
diameter of pipe
547-360 0.01mm 0~10mm 20mm 3.5mm 20m or less 1.5N or less
Inch/Metric ANSI/AGD Type
Order No. Resolution Measuring range Throat depth Minimum inside Accuracy Measuring force
diameter of pipe

3
547-361S .0005"/0.01mm 0~.4"/0~10mm 20mm 3.5mm

.001" or less 1.5N or less

3.5
Note) 1. Changing the contact point requires total adjustment, including the main display unit.

21
Contact Mitutoyo for advice.
2. The accuracy specification does not include the quantizing error of 1 count.
3. Left-handed models can be supplied to special order.
Unit: mm
ABS Digimatic Groove Gage
Contact
point
Best suited for measuring the depth of narrow grooves on
1 Anvil
cylindrical workpieces 66
The contact point and measuring face of the anvil are
1mm thick blade blades. 30.3 (Throat depth)
85
Metric ISO/JIS Type
Order No. Resolution Measuring range Throat
depth
 ontact point and anvil Accuracy
C
dimensions (W D) Measuring force
547-315 0.01mm 0~10mm 30mm 6.5mm30x 1mm 20m or less 1.5N or less
6.5
Inch/Metric ANSI/AGD Type
55

Order No. Resolution Measuring range Throat

depth
 ontact point and anvil Accuracy
C
dimensions (W D) Measuring force
1
85
547-316S .0005"/0.01mm 0~4"/0~10mm 30mm 6.5mm x 1mm .001" or less 1.5N or less
Note) 1. Changing the contact point requires total adjustment, including the main display unit. Contact Mitutoyo for advice.
2. The accuracy specification does not include the quantizing error of 1 count.
3. Left-handed models can be supplied to special order.
Unit: mm
ABS Digimatic Depth Gage 59

Suitable for measuring the depth of holes, narrow grooves, and steps.
(105)

The lifting lever can be used either on the left or right sides.
(67)

16
(35)
(11)
(10)

17

SR
5 1.5
6
Metric ISO/JIS Type A

Measuring Stroke Measuring Base Contact point: Carblde- Extension rods

Order No. Resolution range Accuracy
force Length Width Flatness tipped ball
547-211 63.5mm
0.01mm 20m 1.5N or less 5m or less
547-212 101.6mm 5 pcs.
0~200mm 12mm 16mm 21JAA224
547-251 63.5mm (10, 20, 30, 30, 100mm)
0.001mm 5m 1.5N or less 2m or less
547-252 101.6mm
Inch/Metric ANSI/AGD Type
Measuring Measuring Base Contact point: Carblde-
Order No. Resolution Stroke Accuracy Extension rods
range force Length Width Flatness tipped ball
547-217S .0005"/0.01mm 0~8" .5" .001" or less 1.5N or less 2.5" .63" .0002" or less 4 pcs. (.5",1",2",4")
547-218S .0005"/0.01mm 0~8" .5" .001" or less 1.5N or less 4" .63" .0002" or less 4 pcs. (.5",1",2",4")
21JAZA242
547-257S .00005"/0.001mm 0~8" .5" .0002" or less 1.5N or less 2.5" .63" .00008" or less 4 pcs. (.5",1",2",4")
547-258S .00005"/0.001mm 0~8" .5" .0002" or less 1.5N or less 4" .63" .00008" or less 4 pcs. (.5",1",2",4")
Note) The accuracy specification does not include the quantizing error of 1 count.

8
 ABS Digimatic Bench Gage
Unit: mm
The support plate allows easy reading by tilting the anvil.
Carbide measuring faces (for the contact point and anvil)

40
The lifting lever can be used either on the left or right sides.

59 92
10 60
Effective throat depth

6.3

55
45
5
Support plate 20 Flat anvil
Metric ISO/JIS Type
Order No. Indicator stroke Resolution Workpiece height Effective throat depth Anvil adjustment Accuracy Measuring force
547-064 12mm 0.01mm 20mm 15mm 13mm 20m or less 1.5N or less

Inch/Metric ANSI/AGD Type

Order No. Indicator stroke Resolution Remarks (contact point) Effective throat depth Workpiece height Accuracy Measuring force
547-066S .5" .0005"/0.01mm .248" DIA flat type .59" 1" .001" or less 1.5N or less
Note) The accuracy specification does not include the quantizing error of 1 count.

Unit: mm
ABS Digimatic Upright Gage

Effective measuring range

Best suited for inspection of small parts at a site Lifting cable
Carbide ball contact point
The lifting lever that is a standard accessory for No. 547-054,
Anvil
547-034S can be used either on the left or right sides. (hardened
steel)

SR
40
115

1.5
12
35

Center of anvil 1 Center of 60

Measuring depth 45 20 contact point
547-055 95
Metric ISO/JIS Type
Order No. Resolution Measuring range Anvil Workpiece height Accuracy Measuring force
547-054 0.01mm 12.7mm 40mm (steel type) 20m or less
547-053 0.001mm 12.7mm 50mm (ceramic type) 30mm 3m or less 1.5N or less
547-055 0.001mm 12.7mm 40mm (steel type) 3m or less

Inch/Metric ANSI/AGD Type

Order No. Resolution Measuring range Anvil Workpiece height Accuracy Measuring force
547-034S .0005"/0.01mm .5" 1.57" DIA steel type 1.2" .001" or less
547-033S .00005"/0.001mm .5" 1.97" DIA ceramic type 1.2" .0001" or less 1.5N or less
547-035S .00005"/0.001mm .5" 1.57" DIA steel type 1.2" .0001" or less
Note) 1. The lifting lever (part No. 21EZA198) is a standard accessory for 547-054.
2. The lifting lever (part No. 21EZA199) is a standard accessory for 547-034S.
3. The lifting cable (part No. 540774) is a standard accessory for 547-055, 547-033S, 547-035S.
4. The accuracy specification does not include the quantizing error of 1 count.
The ABS (ABSOLUTE) scale used in these products is a capacitance type absolute encoder. Its patent has been registered in Japan, the U.S., the U.K., Germany, and China.

9
 Various Digimatic Indicators

1 ID-C: Standard Digital Indicator

5
2 ID-N/B: waterproof, 35mm slim body
with various functions
3
3 ID-H: infrared remote controller, high
accuracy, and various functions
4 ID-S: cost-effective type that has basic
1
functions
5 ID-U1025: general-purpose type that
has a 25.4mm measuring range
4 6 ID-C112RB: has a built-in calculation
function
7 ID-C112A: has a peak hold function
8 8 ID-C112GB: internal diameter measuring
7 6
instrument dedicated to cylinder gages

149 0903 1 C (CH) NE, Printed in Japan

Export permission by the Japanese government may
be required for exporting our products according to
the Foreign Exchange and Foreign Trade Law. Please
consult our sales ofce near you before you export
our products or you offer technical information to a
1 nonresident.

Mitutoyo Corporation
20-1, Sakado 1-chome,
Takatsu-ku, Kawasaki-shi,
Kanagawa 213-8533, Japan
T +81 (0) 44 813-8230
F +81 (0) 44 813-8231
http://www.mitutoyo.co.jp
Note: All information regarding our products, and in particular the illustrations, drawings, dimensional and performance data contained in this pamphlet, as well as other
technical data are to be regarded as approximate average values. We therefore reserve the right to make changes to the corresponding designs, dimensions and weights.
The stated standards, similar technical regulations, descriptions and illustrations of the products were valid at the time of printing. Only quotations submitted by ourselves
may be regarded as denitive.