DIN 7985 Z - sim.

ISO 7045
Pan head screws
with cross recess Z (Pozidrive)

v *1
a

rf

dk

d
k l

dk 3,2 4,0 5,0 6,0 8,0 10,0 12,0 16,0

k 1,3 1,6 2,0 2,4 3,1 3,8 4,6 6,0
v 0,8 1,1 1,3 1,6 2,0 2,5 3,0 3,7
a 0,7 0,8 0,9 1,0 1,4 1,6 2,0 2,5
rf 3 4 5 6 8 10 12 16
b min. 15 16 18 19 22 25 28 34
g Z0 Z1 Z1 Z1 Z2 Z2 Z3 Z4
Length / M1,6 M2 M2,5 M3 M4 M5 M6 M8
3 24 24 24
4 24 24 24 24 24
5 24 24 24 24 24
6 24 24 24 24 24 24
8 24 24 24 24 24 24 24
10 24 24 24 24 24 24 24 24
12 24 24 24 24 24 24 24 24
14 24 24 24 24 24 24 24 24
16 24 24 24 24 24 24 24 24
18 24 24 24 24 24 24 24 24
20 24 24 24 24 24 24 24
22 24 24 24 24 24 24
25 24 24 24 24 24 24
28 24 24 24 24 24 24
30 24 24 24 24 24 24
35 24 24 24 24 24
40 24 24 24 24 24
45 24 24 24 24 24
50 24 24 24 24 24
55 24 24 24 24 24
60 24 24 24 24 24
65 24 24 24 24
70 24 24 24 24
75 24 24 24 24
80 24 24 24 24
90 24 24 24 24
100 24 24 24 24
500
1000 1000 500 22
SU 1000 1000 1000 45 25 45 200 100
500 500 200 35
100
A1 / A2 / A4 | SU: Sales unit | All measurements in mm | Other dimensions on request.
Example item no. 7985-2-8X40Z DIN 7985 - A2 - M8 - l = 40mm - pozidrive - *1 without peak

Please note that there are dimensional differences between DIN 7985 and ISO 7045. Detailed information can be found in our technical manual in
240 this catalogue. Pan head screws withTX can be found as WS 9460 in our catalogue. Thread length "b": see table, otherwise b = l - a