Scribd
Upload
555 views1 page

701 Material List

This document provides a materials list for constructing an STOL CH 701 aircraft from aluminum, including: 1) Sheets of aluminum in various thicknesses, sizes, and alloys for the skin and other parts. 2) Extruded aluminum pieces for spars and other structural parts. 3) Aluminum plates for the landing gear. It also lists quantities of rivets needed and notes that additional parts and materials can be found in the drawings and manuals. Builders are warned not to substitute materials without approval.

Uploaded by

Idris
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
555 views1 page

701 Material List

This document provides a materials list for constructing an STOL CH 701 aircraft from aluminum, including: 1) Sheets of aluminum in various thicknesses, sizes, and alloys for the skin and other parts. 2) Extruded aluminum pieces for spars and other structural parts. 3) Aluminum plates for the landing gear. It also lists quantities of rivets needed and notes that additional parts and materials can be found in the drawings and manuals. Builders are warned not to substitute materials without approval.

Uploaded by

Idris
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 1

STOL CH 701 Materials List

The following list is an outline of the required aluminum raw materials to


construct the STOL CH 701 design from the Drawings and Manuals. Many of
the quantities are estimates only actual quantities will vary depending on how
the parts are cut. DO NOT SUBSTITUTE MATERIALS WITHOUT THE
DESIGNERS SPECIFIC APPROVAL.

Raw Materials List: STOL CH 701: Aluminum Parts:

See Drawings and Manuals for Specific Parts, and the Zenair Newsletter for current updates.

ALLOY THICKNESS Size Recommended Quantity Sq.Ft.

-- SHEET METAL --

6061-T6 .016 4 x 12 feet 14 sheets 672


6061-T6 .025 4 x 12 feet 2 sheets 96
6061-T6 .032 4 x 8 feet 1 sheet 32
6061-T6 .040 4 x 8 feet 1 sheet 32
6061-T6 .063 4 x 2 feet 1 piece 8
2024-T3 .090 4 x 2 feet 1 piece 8
2024-T3 .125 2 x 2 feet 1 piece 4

-- ALUMINUM EXTRUSION PIECES --

6061-T6 3/4" x 3/4" x .093 20 feet lengths 4 pieces


6061-T6 1 1/2" x 1" x 1/8" 4 feet 1 piece

-- ALUMINUM PLATES (for landing gear): Grain direction must be LENGTHWISE

6061-T6 3/4" thickness 3 1/4" x 6 feet 1 piece


6061-T6 3/16" thickness 4" x 22" 3 pieces

BLIND RIVETS:
Avdel AVEX 1/8" (A4): 5,500 required
Avdel AVEX 5/32" (A5): 1,300 required

SOLID RIVETS:
AN 470-AD-4-4: 50 required
AN 470-AD-4-5: 500 required
AN 470-AD-5-7: 20 required
AN 470-A-3-3: 600 required

Other Parts and Materials: See Drawings and Manuals (7-G-3)


This list list is subject to change or revision without notice.

Zenith Aircraft Company: Mexico, MO 65265-0650 USA www.zenithair.com

You might also like