1/10/2017 Print Robocut -1iE

GIBAS

Robocut -1iE

Specifications unit Robocut -1iE

X axis mm 600
Y axis mm 400
Z axis mm 310
U axis mm 100
V axis mm 100
max width of workpiece mm 1050
max height of workpiece mm 820
max length of workpiece mm 300
wire diameter mm 0.1~ 0.3

GIBAS Tel: 0232 413061

Str. Saulescu Nr.29, 700010, Iasi, Romania Fax: 0232 412610
http://www.gibas.ro/print.php?id=mw;edm;edm%20wire%20cut;456 1/5
1/10/2017 Print Robocut -1iE

The 15-inch LCD touch panel has considerably

improved the amount of display information and
operability.

A stable, axial movement method is used, in which

the wire (column)is fixed and the XY table on which
the workpiece is mounted is move.

GIBAS Tel: 0232 413061

Str. Saulescu Nr.29, 700010, Iasi, Romania Fax: 0232 412610
http://www.gibas.ro/print.php?id=mw;edm;edm%20wire%20cut;456 2/5
1/10/2017 Print Robocut -1iE

The time-proven, high-reliability AWF has been

further improved to achieve high-speed AWF of 10
seconds. An air jet transport system is adopted in
upper pipe for improving AWF accuracy, reliability
and speed.

If the cutting start hole has a very small diameter

or the hole is not in the right position, this function
automatically searches for a position where
connection is possible and makes a connection.

AI pulse control accurately counts the number of

discharge pulses effective to cutting per unit time
and issues velocity commands in accordance with
the number of effective discharge pulses.

- Wire feed with servo technology - high precision

wire tension and wire feed control
- Wire feeding in water tank - high time saving and
decreasing of corrosion
- Start hole search function - finding of not accurate
start hole positions

GIBAS Tel: 0232 413061

Str. Saulescu Nr.29, 700010, Iasi, Romania Fax: 0232 412610
http://www.gibas.ro/print.php?id=mw;edm;edm%20wire%20cut;456 3/5
1/10/2017 Print Robocut -1iE

The water level is automatically followed the Z-axis

position by servo motor valve control. Optimum for
different thickness machining.

The ROBOCUT features a pre-pressurized clean

water bath that keeps the sludge away from the
seal plate, preventing the mechanical friction, which
ensures good cutting precision.

U/V axis mounted on top of the column. Both axes

support a long stroke of 60mm, so as to realize a
large taper easily to be machined on a thick
workpiece.

Wire straightness (without water jet)

GIBAS Tel: 0232 413061

Str. Saulescu Nr.29, 700010, Iasi, Romania Fax: 0232 412610
http://www.gibas.ro/print.php?id=mw;edm;edm%20wire%20cut;456 4/5
1/10/2017 Print Robocut -1iE

GIBAS Tel: 0232 413061

Str. Saulescu Nr.29, 700010, Iasi, Romania Fax: 0232 412610
http://www.gibas.ro/print.php?id=mw;edm;edm%20wire%20cut;456 5/5