Scribd
Upload
2K views1 page

TXL

The document summarizes transaxles from Oerlikon Graziano suitable for internal combustion forklifts with power ranges of 38 to 55 kW and lifting capacities of 1.5 to 3.5 tons. The transaxles, TXL20 and TXL30 families, are available in two sizes and are easy to use, strong, and suitable for diesel and LP gas forklifts. They offer flexible layouts, reliability, high performance, and minimized maintenance for an excellent total cost of ownership. Technical specifications are provided for each transaxle type including input power, torque, dimensions, load capacity, and transmission ratios.

Uploaded by

ezeizabarrena
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
2K views1 page

TXL

The document summarizes transaxles from Oerlikon Graziano suitable for internal combustion forklifts with power ranges of 38 to 55 kW and lifting capacities of 1.5 to 3.5 tons. The transaxles, TXL20 and TXL30 families, are available in two sizes and are easy to use, strong, and suitable for diesel and LP gas forklifts. They offer flexible layouts, reliability, high performance, and minimized maintenance for an excellent total cost of ownership. Technical specifications are provided for each transaxle type including input power, torque, dimensions, load capacity, and transmission ratios.

Uploaded by

ezeizabarrena
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 1

Transaxles TXLs for Forklifts

Our transaxles (TXL) are suitable for internal combustion forklifts having power from 38 to 55 kW
(51 to 75 HP), are then successfully used on forklifts having a lifting capacity from 1,5 to 3,5 tons.
Those transaxles are available in 2 sizes, TXL20 and TXL30 families: are easy, strong, offer flexible
layout and are suitable for diesel and LP gas forklift trucks.
The reliability, the performances and the minimized and easy maintenance offer excellent total cost of
ownership.

Type of Input Max. input torque to Minimal lenght - wheel center to Dynamic load
Brake dimensions Ratio
transaxles power transmission at stall torque converter housing capacity

kW Nm mm mm kg
TXL20 38 410 494 254 x 48,5 5000 1:13,8

TXL30 7250 1:11,2 or 1:14,05 or


55 630 508 310 x 60 1:15,42 or 1:16,58 or
TXL35 8200 1:19,35

Engine
Type of Converter housing size
max Electric control Inching Power take off
transaxles connection to engine flange
speed

Rpm
TXL20 Connection flange SAE A, 2 holes (SAEB opt.), R
Hydraulic or mechanic
1:1,069 to the engine, continuously transmittable
TXL30 2800 SAE3 or SAE4 26W Max 12V or 24V with horizontal or
torque 130 Nm, spline 16/32 = 30 11 teeth;
vertical control lever set
TXL35 13 teeth opt., peak torque 142 Nm

* Oerlikon Graziano holds the right to change the mentioned specifications without any previous information.

TXL20 TXL30

Oerlikon Graziano SpA


Via Cumiana 14 - 10098 Rivoli (Turin-Italy)
Phone +39.011.9570.1 - Fax +39.011.9594.803
info.graziano@oerlikon.com
www.oerlikon.com/graziano

You might also like