Scribd
Upload
49 views1 page

High-Frequency Capacitor 606PHC250KS

This document provides specifications for a 60 microfarad high frequency/switching capacitor with a maximum dissipation factor of 0.0015 and operating temperature range of -40°C to 85°C. The capacitor has applications in industrial controls, motor speed controls, resonant circuits, induction heaters, and electronic ballasts. Electrical specifications include a capacitance tolerance of -10% to +10%, ESR of 3.5 milliohms, and ability to withstand 250V DC and 160V AC voltages.

Uploaded by

Neha Jain
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
49 views1 page

High-Frequency Capacitor 606PHC250KS

This document provides specifications for a 60 microfarad high frequency/switching capacitor with a maximum dissipation factor of 0.0015 and operating temperature range of -40°C to 85°C. The capacitor has applications in industrial controls, motor speed controls, resonant circuits, induction heaters, and electronic ballasts. Electrical specifications include a capacitance tolerance of -10% to +10%, ESR of 3.5 milliohms, and ability to withstand 250V DC and 160V AC voltages.

Uploaded by

Neha Jain
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 1

606PHC250KS

HIGH FREQUENCY/ SWITCHING


Parts are RoHS compliant

APPLICATIONS: industrial controls, Motor speed controls, Resonant circuits, induction heaters,
Electronic ballasts, Audio, SMPS

ELECTRICAL SPECIFICATIONS
Capacitance: 60 uF
Dissipation Factor: 0.0015 Max at 1000 Hz and 25C
Temperature Coefficient: -200 PPM/C: -100 PPM/C, 100 PPM/C
Ripple Current: 14 A at 100 kHz and 70C
ESR: 3.5 milliOhms (typical) at 100 kHz and 25C
Self Inductance: 1 Nanohenries maximum per mm of body length and lead length
dvdt: 15 V/s

Tolerance: -10 % , +10 %


Temperature Range: -40C to +85C
Above 85C the rated (DC/AC) voltage must be derated at per N/AC
WVDC: 250 Volts DC
SVDC: 400 Volts DC
VAC: 160 Volts AC

Terminal to Terminal Dielectric strength: 2 times the rated DC voltage when applied between the
terminals for 10 seconds

Terminal to case Dielectric strength: 3000 VAC when applied between the terminals and case for 60
seconds

Insulation Resistance (Terminal to Terminal): 30000 MINIMUM after 100 Volts DC is applied for 60
seconds at 20C
Reliability: 300 failures/billion component hours
Load Life: 100000 hours at 70C with 100% of rated voltage
Capacitance Change: 0 of initially measured value
D.F. Change: 0 of maximum specified value
I.R. Change: 0 of minimum specified value

You might also like