LaserPerformance NORTH AMERICA

300 Highpoint Avenue

Portsmouth, Rhode Island 02871
USA
t +1 800 966 SAIL
f +1 401 683 0990

LaserPerformance EUROPE
Station Works, Long Buckby
Northamptonshire NN6 7PF
United Kingdom
t +44 (0) 1327 841600
f +44 (0) 1327 841601

LaserPerformance ASIA
Room 3415
China Merchants Tower
Shun Tak Centre
No. 168-200 Connaught Road Central
Hong Kong
t +852 2902 2818
f +852 2587 7868

LaserPerformance MIDDLE EAST

T5 Middle East LLC
Dubai Investment Park
po box 38442
Dubai, UAE
t +9714 885 7601

LASERPERFORMANCE.COM

All rights reserved. ©2009 LaserPerformance.

LaserPerformance and associated logos are
Club 420 Parts
rts L
Locator
oca
ator
trademarks. Laser, SB3, Sunfish, and Dart are
trademarks used under license. LaserPerformance
reserves the right to make design and/or specifica-
tion changes to any of their products as part of
their continuous development program.
 Following items are not shown
85045
85041
Centerboard gasket, Dacron (set)
Gasket end, plastic V 420 Hull and Deck
85038 Fastener set for c/b retainer strips
91243 Becket roller for deadend
85013 Centerboard gasket retainer (set)
85015 Centerboard Gasket, mylar, 2"
85046 Recessed Centerboard gasket

91328 Cleat, cam

Centerboard & Trunk Hardware 91289 Wedge, cam back-up (set)
91327 Cleat, CB uphaul/downhaul, clam 91108 Bullseye, large w/stainless steel insert
91334 Block, thru-deck
91073 Cleat, clam
91060 Bushing, screw-down 91240 Non Skid (set)
91184 Riser, extruded (current)
91285 Cleat, cam, spinnaker halyard 91253 Spinnaker block, tie lite, 29mm
91120 Guy hook w/nut, hook through version (2004 & previous)
91131 Hiking strap plate
91119 Guy hook, surface mount (current)
91133 Hiking strap set
91012 Backup rod
90539 Mast step, stainless steel
90458 Mast step nut & bolt Bow fittings
91051 Bow plate
91198 Shackle, bow, 1/4" screw pin
91337 Block, micro, single 91076 Clevis pin, 1/4" w/split ring
91077 Clevis pin, 3/16" w/split ring
91166 Fastpin, jib tack, 1/4"
91075 Clevis pin, 1/4" x 1 1/4"

91334 Block, thru deck

Rubrail and Bow Bumpers

91323 Eyestrap, 2-hole, large 91928 Bailer, suction, super medium 91002 Rubrail, Heavy duty, vinyl, U-shaped, platinum
91027 Bailer handle 91001 Rubrail, Vinyl, 30', precut for 420
Rudder Hardware
91047 Bow bumper, 420 JRV, molded
85238 Rudder lift stop
91000 Bow bumper, 420 SCV, molded
85090 Pintle, HD, lower
85091 Pintle, HD, upper
95800 Spinnaker Bag, Blue
Ports, Plugs, Bailers 91255 U-bolt w/ nuts (Current) 91107 Fairlead, w/SS insert, for trapeze shockcord
91372 Inspection port, 5" Mainsheet/Traveler System 91013 Backup rod 91338 Block, micro, check for trap shockcord (not shown)
91024 Bailer, transom ball w/shockcord 91340 Block, carbo, single, 40mm 90583 Shroud adjuster, 1/4" w/pins & rings
91084 Plug, Black screwtype (2 pk.) RWO 91205 Shackle, small w/ 3/16" pin 91076 Clevis pin, 1/4" w/split ring
91085 Drain plug, current, Beckson 91283 Block, large ratchet
91086 Drain plug assembly, black, RWO 91217 Spring, large stand-up 85016 Centerboard pivot bolt assembly
91089 Plug, black rubber 91053 Traveler bar end bracket (each)
91090 Grey plug assembly, screw, Holt Allen 91241 Traveler bar
91091 Drain plug, grey, (Pkg 2) 90659 Pin for bridle
91093 Plug, White Bayonet old style (2 pk.) 91323 Eyestrap, large, 2 hole
91055 Bridle, spliced for single adjustment

2
Junior Race Version Masts
17600 Mast, Club 420, JRV, with spinnaker hardware, trapeze gear, running and standing rigging
90687 Mast, Club 420, JRV, with spinnaker hardware, trapeze gear, no running or standing riggin
420 Spars and Rigging
Collegiate/Schoolastic Masts
89013 Mast, 420 SCV, with running rigging
89038 Mast, 420 SCV, without running rigging 90231 Trapeze wire, 420
90601 Trapeze donut, black
90230 Trapeze wire assembly, 420,
90217 Shroud 90603 Trapeze ring, stainless steel
90205 Forestay 90442 Cleat, trapeze w/roller
91205 Shackle, small w/ 3/16" clevis pin
91100 Eyestrap 91070 Cleat, horn

91399 Block, cheek, 29mm, carbo

91327 Cleat, clam
90549 Masthead w/ sheeve 90003 Spreader bracket w/ pins 90502 Halyard, jib, wire with tail
90578 Masthead sheeve 90018 Spreaders, airfoil, pair, 16" 91336 Single micro block with becket 90510 Hounds assembly w/bolt & shroud tangs
91074 Clevis pin 90016 Spreader tip w/pin & ring 90570 Jib Halyard Shackle

17675 Spinnaker Pole, rigged

90456 Spinnaker pole end fitting 91077 Clevis pin, 3/16" w/ring
90509 S-hook, topping lift 90420 Hounds, bracket only
91440 Eyestrap for spin pole 90587 Outside Shroud Tang 91196 Shackle w /pin
91337 Block, bullet single 90586 Inside Shroud Tang
91100 Eyestrap, topping lift block 90410 Block, single wire sheave

91250 Spinnaker block (limited swivel) 91213 Long spacer

91100 Eyestrap, spinnaker halyard block 91211 Short spacer
90568 Mast eye, spinnaker pole 91338 Block, micro cheek
90559 Plug, mast heel w/tenon

Boom Vang Systems

90604 Vang, 16:1 system
91336 Block, micro bullet w/becket
91203 Shackle, 3/16" twist w/screw pin
90567 Ring for halyard purchase 91337 Block, micro bullet
91197 Shackle, 1/4" w/clevis pin & ring
90583 Shroud Adj. w/ pin & rings 90406 Bail, vang, 1/4" round
91076 Clevis pin, 1/4" & Ring 91205 Shackle, 3/16" w/pin & ring
90554 Fastpin - optional
90490 Gooseneck, (boom side only, complete) SCV Vang
91077 Clevis pin, 3/16" w/split ring
90605 Vang, 3:1 system
17650 Boom, club 420
90659 Tack Fastpin, 1/4 90498 Gooseneck universal, heavy duty 91200 Shackle, d ring
90555 Gooseneck locking fastpin w/ lanyard 91099 Eyestrap 90403 Bail 91327 Clamcleat 91330 Block, micro fiddle w/v-jam, w/o shackle
90553 Pin Only 91336 Block, micro bullet w/becket
90652 Wire Only 91203 Shackle, 3/16" twist w/screw pin
90491 Gooseneck, (mast side only)
91052 U bracket Obsolete Items - Limited Availability
90467 Gasket 90404 Bail boom, heavy duty 20240 Trapeze ring w/line, cleat & shackle - DWG
Bolt, 3/8 - 16 x 2, ss
Washer, 3/8 x 1 x 1/2 91205 Shackle, 3/16" w/ clevis pin 90686 Trapeze wire, w/adj. system (pre 06) - DWG
91341 Block, carbo 90681 Trapeze handle -DWG
91338 Block, micro cheek
3
 85206 Tiller, 420, Aluminum, rigged
85193 Tiller Extension, 33 inches
420 Blades
85245 Universal, Black, Omniflex 85133 Extruded 420 rudder head
85165 Spacer, threaded, long
85145 Rudder Shim Kit, extruded rudder head
85265 Bushing, 420 Extruded Rudderhead

85091 Pintle, upper, HD, 4 holes

91066 Cleat, Clam, black, plastic 85000 Centerboard, 420

85238 Stop, rudder
85016 Centerboard Pivot Bolt
85076 Lanyard, rudder downhaul
85150 Rudder, 420, rigged Centerboard Bushing:
Teflon Tube
3/8” ID x 1/2” OD x 7/8”
85090 Pintle, lower, HD, 4 holes

85207 Tiller, 420, Aluminum, unrigged

85115 Rudder Blade, 420

Plate Style Rudderhead Parts
Rudder bushing :
Items may be limited in quantity
Teflon Tube
1/4” ID x 5/16” OD x 7/16” Long
85146 Rudder Shim Kit, Plate Rudder Head
85060 Gudgeon, 420, on Rudderhead
85166 Spacer, threaded, short
85168 Spacer, thrubolt, short

Discontinued Items - Unavailable

20031 Tiller 420, Oak, rigged w/33 inch extension
20084 Tiller 420, Oak, rigged with 36 inch extension
50122 Tiller 420, unrigged, wood
50097 Rudder head, plate (1 plate)
20218 Rudder head, plate style, complete

4
 83023 Spinnaker Retro Kit SCV to JRV (no sail included)
420 Retro Kit,
91250 Spinnaker halyard block, limited swivel Sails & Accesories
Sails
91253 Spinnaker block, Tie-lite, 29mm 90568 Spinnaker pole ring
94701 Main with Batten
94700 Jib
91327 Cleat, clam 91060 Bushing, small
94702 Spinnaker w/yellow/green/red stripe, Rasta
94703 Spinnaker w/black/yellow stripe, Bzzzz
91107 Fairlead 91338 Block, micro cheek
95860 Batten set, Mainsail
95874 Batten, top
91285 Cleat, micro cam 91337 Block, micro single
95873 Batten, middle
17675 Spinnaker pole 95872 Batten, lower
90231 Trap wires with adjusters
95871 Batten tip, adjustable
95846 Sail number, red, individual
95845 Sail number, blue, individual
91100 Eyestrap 95853 Sail number, black, individual

Topping lift w/hook 91073 Guy cleat, clam

90509 Hook, topping lift
Storm Covers
91184 Guy cleat riser, extruded
Foreguy High quality marine polyester - water, mildew
9 feet of 5mm shockcord
and UV resistant fabric
Spinnaker sheets 91120 Guy hook
36 feet of 5mm dyneema 87139 Deck cover
Spinnaker halard 87140 Deck cover, tent
38 feet of 4mm sprinline 87141 Hull cover
87142 Foil bag
91240 Nonskid, 3"
Accessories
95806 Sail bag
78900 Bunker, trailer, fiberglass w/carpet
95800 Spinnaker bag 83023 Retro kit, 420, SCV to JRV, no sail
83008 Protest Flag

5
 420 Technical Information

Hull Weight 230 lbs 104.33 KG

LOA 13.90 ft 4.24 m
Beam 5.50 ft 1.68 m
Draft 2.95 ft .090 m
Main Sail Area 79.65 sq ft 7.40 sq m
Jib Sail Area 30.14 sq ft 2.80 sq m
Spinnaker Sail Ar 95 sq ft 8.83 sq m

Description Diameter (in) Diameter (mm) Type Length Quantity

Trapeze Retractor 3/16 in 5mm shockcord 11 ft 1
Centerboard Downhaul 3/16 in 5mm prestretch 4.5 ft 1
Centerboard Uphaul 3/16 in 5mm prestretch 7.5 ft 1
Hiking strap aft tie down 3/16 in 5mm prestretch 4 ft 1
Spinnaker block lines 2mm dyneema 2 ft 2
Vang (4:1) 3/16 in 5mm prestretch 15 ft 1
Vang (16:1) 3mm dyneema
Vang Primary 3/16 in 5mm prestretch
Hking strap center tie down 5/32 in 4mm prestretch 1.5 ft 2
Hiking strap shockcord 1/4 in 6mm shockcord 4.5 ft 1
Spinnaker bag shockcord 3/16 in 5mm shockcord 2 ft 3 in 1
Painter 5/16 in 8mm prestretch 23 ft 1

Cunningham 3/16 in 5mm prestretch 5 ft 1

Outhaul 3/16 in 5mm prestretch 10 ft 1
Main Halyard 1/4 in 6mm prestretch 40 ft 1
Topping lift 3/16 in 5mm prestretch 30 ft 1
Spinnaker Foreguy 3/16 in 5mm shockcord 8 ft 1
Spinnaker Halyard 5/32 in 4mm prestretch 38 ft 1
Jib halyard tail 1/4 in 6mm prestretch 16 ft 1
Jib halyard wire 3/32 in, 7x19 ss wire 14.5 ft 1
Trapeze wire height adjuster 3/16 in 5mm prestretch 9 ft 1

Mainsheet 5/16 in 8mm braid on braid 28 ft 1

Jibsheet 5/16 in 8mm braid on braid 25 ft 1
Mainsheet Bridle 3mm dyneema 11 ft 1
Spinnaker Sheet 3/16 in 5mm dyneema 36 ft 1 6