Scribd
Upload
382 views1 page

HyVolt I Electrical Insulating Oil Specs

This document provides the specifications for HyVolt I, an uninhibited electrical insulating oil. It lists test descriptions and methods to evaluate properties like viscosity, pour point, breakdown voltage, and oxidation stability. The oil meets the requirements of IEC 60296 for electrical insulating oils and is produced from severely hydrotreated naphthenic base oils.

Uploaded by

faisii
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
382 views1 page

HyVolt I Electrical Insulating Oil Specs

This document provides the specifications for HyVolt I, an uninhibited electrical insulating oil. It lists test descriptions and methods to evaluate properties like viscosity, pour point, breakdown voltage, and oxidation stability. The oil meets the requirements of IEC 60296 for electrical insulating oils and is produced from severely hydrotreated naphthenic base oils.

Uploaded by

faisii
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 1

HyVolt I

Electrical Insulating Oil Marketing Specification



This uninhibited, electrical insulating oil is produced from a severely hydrotreated naphthenic oil to meet the specification requirements
defined in IEC 60296, ed. 4, 2012, general specifications.
TEST DESCRIPTION TEST METHOD SPECIFICATIONS TYPICAL VALUES
Function MIN MAX
Viscosity, mm2/s at 40C ISO 3104 12.0 9.9
Viscosity, mm2/s at -30C ISO 3104 1800 1162
Pour Point, C ASTM D5950 -40 -49
Water Content, mg/kg IEC 60814 30 7
Breakdown Voltage, kV, Before treatment, 2.5 mm IEC 60156 30 55
Breakdown Voltage, kV, After treatment, 2.5 mm IEC 60156 70 75
Density at 20C, g/ml ISO 12185 0.895 0.882
DDF at 90C IEC 60247 0.005 0.001

Refining/Stability
Appearance IEC 60296 PASS PASS
Acidity, mg KOH/g IEC 62021-1 0.01 <0.01
Interfacial Tension, mN/m ASTM D971 40 45
Corrosive Sulfur DIN 51353 Noncorrosive Noncorrosive
Corrosive Sulfur ASTM D1275 Noncorrosive Noncorrosive
Corrosive Sulfur IEC 62535 Noncorrosive Noncorrosive
DBDS, mg/kg IEC 62697-1 Not detected (<5) Not detected
Inhibitors, % IEC 60666 Not detected (<0.01) Not detected
Metal Passivator Additives, mg/kg IEC 60666 Not detected (<5) Not detected
Other Additives IEC 60296 See
Furfural Content, mg/kg IEC 61198 Not detected (<0.05) Not detected
Carbon Type Analysis, % IR-Brandes
Ca 11
Cn 40
Cp 49

Performance
Oxidation Stability at 120C, 164 hours IEC 61125, C
Total Acidity, mg KOH/g 1.2 0.6
Sludge, % 0.8 0.2
DDF at 90C 0.500 0.044

Health, Safety and Environment


Flash Point, PMCC, C ISO 2719 135 146
PCA Content, % IP 346 3 <3
PCB Content, mg/kg IEC 61619 Not detected (<2) Not detected
Dated: 10-30-2015

HyVolt I is a product of Ergon Refining, Inc.
As per IEC 60296, ed. 4, 2012, this product contains no undeclared additives.

You might also like