Scribd
Upload
416 views3 pages

Qa/Qc Department Welding Inspection Report

This welding inspection report documents inspections of welds on trench pipework brackets. The report includes details of 5 welds inspected on April 8th, 2016 such as welder name, material, thickness, process and visual test results. Three of the welds were found to need practice, with issues like poor weld profile, excess reinforcement and filler cuts. A second report documents 3 welds inspected on August 30th, 2016 on another trench pipework bracket. All welds were found to have acceptable visual test results and be within tolerance.

Uploaded by

abdulgafoor54
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as XLSX, PDF, TXT or read online on Scribd
416 views3 pages

Qa/Qc Department Welding Inspection Report

This welding inspection report documents inspections of welds on trench pipework brackets. The report includes details of 5 welds inspected on April 8th, 2016 such as welder name, material, thickness, process and visual test results. Three of the welds were found to need practice, with issues like poor weld profile, excess reinforcement and filler cuts. A second report documents 3 welds inspected on August 30th, 2016 on another trench pipework bracket. All welds were found to have acceptable visual test results and be within tolerance.

Uploaded by

abdulgafoor54
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as XLSX, PDF, TXT or read online on Scribd
You are on page 1/ 3

QA/QC DEPARTMENT

WELDING INSPECTION REPORT Report No: 1

Test
Sr No Date Welder Name Thickness Material Process Root/Hot Fill/Capping VT Result Remarks
Coupon

1 4/8/2016 Rizwan Ahmed 6" Pipe 10.97mm C.S GTAW/SMAW GTAW SMAW Satisfactory Good Weld Profile.

2 4/8/2016 Sajjad Hussain 6" Pipe 10.97mm C.S GTAW/SMAW GTAW SMAW Satisfactory Good Weld Profile.

Need Practice for Root Pass, Lop and Filler


3 4/8/2016 M. Shahbaz 6" Pipe 10.97mm C.S GTAW/SMAW GTAW SMAW Need Practice Cut at Root side. Due to fever didn't
complete Fill/Capping

Need Practice for Root, Fill/Capping. Poor


4 4/8/2016 Tahir Baig 6" Pipe 10.97mm C.S GTAW/SMAW GTAW SMAW Need Practice Weld Profile, Excess Reinforcement, & Filler
cut at Root side.

Need practice for Root Pass, Lof at Root at


5 4/8/2016 Abu Bakar 6" Pipe 10.97mm C.S GTAW/SMAW GTAW SMAW Need Practice Root Side.

Comments (if any) :


ICOM QC Inspector

Name of Inspector

Signature & Date


Client : ACGC

Job Title: Hangar / Trench Pipework

Drawing No: 28756

Equipment No./Part No.: Trench Pipework Bracket No. 5/B5

Date: 30/08/2016

WELDING INSPECTION REPORT Report No: 2

Sr No. Description Welder Name Welder ID Type of Material/Spec. Thickness Joint type Preheat Process VT Result Remarks

1 O/A P/L welded M.Shahbaz AJ-951 C.S 6mm Fillet N/A Gtaw Acceptable All Welding variables are within tolerance
withTrench Bracket

2 1×6S Welded with M.Shahbaz AJ-951 C.S 6mm Fillet N/A Gtaw Acceptable All Welding variables are within tolerance
Trench Bracket

3 2×7S Welded with M.Shahbaz AJ-952 C.S 6mm Fillet N/A Gtaw Acceptable All Welding variables are within tolerance
Trench Bracket

Comments (if any) :


QA/QC Department ICOM QC Inspector

Name of Inspector Arslan Waheed

Signature & Date


Client : ACGC

Job Title: Hangar / Trench Pipework

Drawing No: 28756

Equipment No./Part No.: Trench Pipework Bracket No. 2/B2

Date: 30/08/2016

WELDING INSPECTION REPORT Report No: 1

Sr No. Description Welder Name Welder ID Type of Material/Spec. Thickness Joint type Preheat Process VT Result Remarks

1 O/A P/L welded Abu Bakar AJ-956 C.S 6mm Fillet N/A Gtaw Acceptable All Welding variables are within tolerance
withTrench Bracket

2 1×7S Welded with Abu Bakar AJ-956 C.S 6mm Fillet N/A Gtaw Acceptable All Welding variables are within tolerance
Trench Bracket

3 2×9S Welded with Abu Bakar AJ-956 C.S 6mm Fillet N/A Gtaw Acceptable All Welding variables are within tolerance
Trench Bracket

Comments (if any) :


QA/QC Department ICOM QC Inspector

Name of Inspector Arslan Waheed

Signature & Date

You might also like