• Marks bleed through when painted over

with oil/solvent based paints and primers

•
•
Can be used for identification purposes
Chisel tips are replaceable to assure
Merchandising
• Makes permanent marks on plastic, metal, complete use of paint in each marker
glass, ceramics, and most non-porous • Valve action mechanism prevents ink in • Come filled and ready to display
surfaces. barrel from drying when cap is left off Pen Canisters
• Fast drying permanent ink marks on almost • Compact footprint: 4” (W) x 6.75” (H)
• Threaded barrel allows the marker to be

CANISTERS
BLEED THRU

any surface Product Code Pack Description

screwed into a jig or apparatus • BRITE-MARK® display holds: 84060 BRITE-MARK® Display (Filled)
12 Yellow 84080 STRIKE-MARK™ Display (Filled)
Typical Applications BLEED THRU™ 12 Black
12 White 84061 BRITE-MARK® Display (Empty)
• Ideal for fabricating structural steel or Product Code and Color 84081 STRIKE-MARK™ Display (Empty)
layout work where marks are required to * STRIKE-MARK™ display holds:
bleed through a primer coat covering 44541 Black 36 Black
the marks

BLISTER CARDS
BRITE-MARK® Blister Card TEXPEN® Blister Card
LAYOUT FLUID / REMOVER / DETECTORS Product Code and Color Product Code and Color
84101 Blue 16018 Blue
84102 Black 16038 Black
• Resists cracking and chipping • Reduces eye strain 84107 Green 16048 Green
• Add practically no thickness to work piece • Toluene free 84104 Yellow 16068 Yellow
84103 White 16088 White
• Dries in minutes
84105 Orange 16108 Orange
STEEL BLUE® 84106 Red 16028 Red
STEEL BLUE®

Product Code Size

80000 Aerosol 16 oz. • Adds visiblity to markers PEN DISPLAY
Typical Applications 80200 Felt Applicator 2 oz. • Constructed with light weight, corrugated cardboard
80300 Brush-In-Cap 4 oz. Product Code Pack Description
• Provides a deep, uniform color that 80400 Brush-In-Cap 8 oz. • Configured to hold any marker box in the DYKEM® 84999 Pen Display
prevents glare so scribes appear clear, 80600 Bottle 930 mL marker line

DISPLAY
sharp and precise for machinists
• Compact footprint: 8” (W) x 11.25” (D) x 11” (H)
The DYKEM® Pen display is shipped empty
REMOVER & CLEANER

• Prepares metal surfaces

• Dries in minutes
• Does not contain toluene or chlorinated solvents

REMOVER & CLEANER • Showcases the variety of DYKEM® marking systems PEN SHOWCASE
line
Product Code Size Product Code Pack Description
• Comes stocked with product and 50 sheets of

SHOWCASE
literature 84997 Pen Showcase
Typical Applications 82038 Aerosol 16 oz.
82638 Bottle 930 mL • Footprint with Literature:
• Prepares surfaces for better adhesion of 82738 Bottle 1 Gallon 12.5” (W) x 10” (D) x 17.5” (H)
layout fluids and removes layout fluids 82838 Pail 5 Gallons • Footprint without Literature:
when project is complete 82938 Drum 55 Gallons 12.5” (W) x 10” (D) x 14.5” (H)

• Blue, soft, uniform paste good condition for months

• Allows for demonstration of the entire DYKEM® PEN DEMO KIT
THE MARK OF
HI-SPOT BLUE

spreads easily and evenly • Saves time and money

DEMO KIT
product line
• The film remains pliable in surface scraping work Product Code Pack Description
and transferable and in • Comes with product and demonstration supplies and
instructions 84998 Pen Demo Kit

HI-SPOT BLUE
™
Typical Applications
• Detects high spots on bearings, gears
and other close fits
Product Code
83307
Size
.55 oz Tube
For further information on DYKEM® products, visit us at www.dykem.com or call us direct at 800.443.9536
EXCELLENCE
Paint Markers
• Visually detects loose nuts and bolts • Excellent adhesion Distributor Information
CROSS CHECK™

• Tamper proof torque mark • Safe for most surfaces

Temporary Ink Markers
• Highly visible flourescent color • Provides warranty protection
CROSS CHECK™
Product Code Color Size Speciality Markers
83314 Orange 1 oz Tube
83315 Green 1 oz Tube
Typical Applications 83316 Red 1 oz Tube Layout Fluids
83317 Yellow 1 oz Tube
• Quality control and warranty work 83318 Blue 1 oz Tube Olathe, Kansas 66061 • USA • Fax: 913.397.8761 • Phone: 913.397.9889 LI338
100622
 Paint Markers TEXPEN® Industrial Steel Tip Paint Marker Speciality Markers
• Steel tip paint marker - Medium Barrel
BRITE-MARK® Fine Fine Tip STRIKE-MARK™ Fast Dry Marker
Product Code and Color
• Permanent paint marker with fine, fiber valve action tip 16030 Black 16080 White • Over 12 times the writing life compared to other permanent ink markers
ideal for the easy labelling of small parts 16010 Blue 16060 Yellow • Drying time: less than 10 seconds on most surfaces
16040 Green 16100 Orange • Valve action tip allows dried out tips to re-inked...no waste!
Product Code and Color

STRIKE-MARK™
16020 Red
41001 Blue 41010 Orange 41016 Silver
Medium Tip Fine Tip Medium Tip
41003 Black 41002 Red 41045 Violet
Product Code and Color
41008 White 41004 Green Typical Applications Product Code and Color Product Code and Color
41006 Yellow 41014 Gold 16033 Black 16083 White
Typical Applications • Packaging 33682 Black 91682 Black
BRITE-MARK® Paint Markers / Valve Action

16013 Blue 16063 Yellow 33731 Blue 91731 Blue

Typical Applications • Structural steel 16043 Green 16103 Orange • Marks cardboard, plastic, rubber, metal, 33734 Green 91734 Green
BRITE-MARK® 916 Medium 16023 Red and many other surfaces 33736 Red 91736 Red
• Identifying inventory • Steel stockholders

TEXPEN®/DALO® Steel Tip Paint Markers

Broad Tip • Electronics industry
• Work in-progress • Permanent paint marker with medium, fiber valve action tip Product Code and Color
• Construction sites
• Identifying tools Product Code and Color
• Identifying rusty / oily / greasy tools 16034 Black 16084 White
84001 Blue 84006 Red 84009 Pink 16014 Blue 16064 Yellow
• Welding/fabricating metal 84002 Black 84007 Green 84010 Brown • Identifying parts that are stored 16044 Green 16104 Orange HIGH TEMP 44
• Finished products 84003 White 84051 Gold 84008 Lt Blue outside 16024 Red
84004 Yellow 84050 Silver 84022 Lt Green • Permanent fiber tip valve action paint marker
84005 Orange 84019 Violet • Valve action mechanism prevents paint in barrel from
• General purpose felt tip paint markers that • Stainless steel-ball tip – no risk of tip wear DALO® Industrial Steel Tip Paint Marker
even if you are writing on rough drying when cap is left off
write on virtually any surface
BRITE-MARK® 40 Medium concrete or rusty metal • Steel tip paint marker - Large Barrel • Threaded barrel allows the marker to be screwed
• Quick drying, oil-based paint withstands into a jig or apparatus
• Easily writes through oil, grease and water Medium Tip
indoor and outdoor conditions without • Permanent paint marker with medium, fiber valve action tip.

HIGH TEMPERATURE MARKERS

• Drying time: 45 seconds –1 minute
fading, chipping or losing opacity Clip cap screw for secure closure. Threaded barrel allows the Product Code and Color
• Writes at all angles, even upside down Product Code and Color Product Code and Color
marker to be screwed into a jig or apparatus 26033 Black 26083 White
• Valve action mechanism prevents paint in • Paint withstands extreme weather conditions Typical Applications 44250 Black 44219 White
barrel from drying when cap is left off Product Code and Color 26013 Blue 26063 Yellow
without losing legibility or brightness 26043 Green 26103 Orange • Components exposed to high 44094 Blue 44424 Yellow
40001 Blue 40010 Orange 40016 Silver 44266 Green
• Formula is not xylene-based • Available in different tip sizes and colors 26023 Red temperatures
40003 Black 40002 Red 40045 Violet
• Available in different tip sizes and colors 40008 White 40004 Green 40009 Pink Broad Tip • Ideal for marking glass, metal
• TEXPEN® marker is a smaller version of the
40006 Yellow 40014 Gold 40007 Brown Product Code and Color and ceramics HIGH TEMP TXP
• Drying time: 25–35 seconds DALO® marker
26034 Black 26084 White • Electronics industry
• Drying time: 25–35 minutes 26014 Blue 26064 Yellow • Stainless steel-ball tip – no risk of tip wear even if
26044 Green 26104 Orange you are writing on rough surfaces
BRITE-MARK® H20 Water-Based

26024 Red • Ideal for marking on surfaces that are • Easily writes through oil, grease and water
• General purpose felt tip paint markers • Valve action mechanism prevents • Writes at all angles, even upside down
that write on virtually any surface paint in barrel from drying when cap is exposed to extreme high temperatures
• Drying time: 25 –30 minutes
left off • Mark becomes fused and permanent after
• Water-based permanent paint
• Available in different colors
Temporary Ink Markers heat is applied – up to 2000°F Fine Tip
Product Code and Color
Medium Tip
Product Code and Color
• Low Odor / Low VOC • Ideal for marking glass, metal and ceramics
• No hazardous air pollutants (HAP’s) • Drying time: 60–90 seconds • Paint withstands extreme weather 17030 Black 17033 Black
conditions without losing legibility 17080 White 17083 White
RINZ OFF® Water Removable or brightness 17060 Yellow 17063 Yellow
BRITE-MARK® H20 Medium • Marks can be removed with water
Typical Applications Medium Tip
• Permanent water-based paint marker with medium,
• Identifying inventory Product Code and Color
fiber valve action tip.
91109 Black 91106 Red
HIGH PURITY
• Work in-progress Product Code and Color 91105 Blue 91757 Yellow • Permanent fiber tip valve action paint marker
• Identifying tools 91603 Blue 91425 White 91108 Green 91709 White • Valve action mechanism prevents paint in barrel from

RINZ OFF® & SUDZ® OFF Temporary

91426 Black 91604 Orange Broad Tip drying when cap is left off
• Welding/fabricating metal 91602 Green 91428 Red Product Code and Color • Drying time: 45 seconds –1 minute
91427 Yellow Typical Applications
• Finished products 44109 Black 44106 Red Fine Tip Medium Tip
• Quality control 44105 Blue 44757 Yellow Product Code and Color Product Code and Color
44108 Green 44709 White
• Work in - progress 33404 Black 44404 Black

HIGH PURITY MARKERS

TUFF GUY™ General Purpose

33301 Red 44534 Blue

• General purpose marker ink in barrel from drying when cap is • Automotive industry Typical Applications
left off SUDZ OFF® Detergent Removable 33729 White 44301 Red
• Highly resistant to coolants and • Marking stainless steel 44729 White
cutting fluids • Threaded barrel allows the marker • Perfect for temporary writing on non-treated, • Marks can be removed with mild detergent (pH higher than 10) 44916 Yellow
to be screwed into a jig or apparatus
• Aerospace industry
• Not a xylene based formula non-painted metal surfaces which require ink
Medium Tip • Ship/boat/marine industries
• Valve action mechanism prevents • Drying time: 45 seconds –1 minute that can be removed with water or with
Product Code and Color Product Code and Color HIGH PURITY TXP
detergents with a pH of ≤ 10 • Used where surface degradation,
91985 Black 91939 Red • Stainless steel-ball tip – no risk of tip wear even if you are
• General purpose xylene-free temporary contamination or other adverse effects are a
TUFF GUY™ General Purpose Marker 91938 Blue 91694 Yellow concern writing on rough surfaces
ink markers 91371 Green 91146 White • Easily writes through oil, grease and water
• Will not etch metal
• Ideal for quality control Broad Tip • Drying time: 25 –30 minutes
Product Code Color Product Code Color • Paint will not contaminate or adversely affect
Typical Applications • No ghosting or bleed-through occurs Product Code and Color the surface being marked Medium Tip - Product Code and Color
44203 Black 44175 White when removed marks are painted over 44985 Black 44939 Red
• Shrink wrap and plastics 44819 Red 44177 Green
• Meets the requirements of the US Energy Research 17473 Black
44938 Blue 44694 Yellow & Development Administration ’'Nuclear Grade” for 17463 White
• Machine shops 44401 Yellow 44179 Blue • Drying Time: 25-35 seconds black, red, yellow and white inks.
44371 Green 44146 White 14143 Yellow