COURSE: Network Analysis & Design MARK:
CODE: MCN1024 TOPIC:
ASSESSMENT: Project NO: TIME: /40
NAME: _________________________________________ MATRIC NO: ________________________________
Project Instruction
You are appointed as a consultant in IT Company received a RFP invitation
letter from University Malaysia Pahang. Based on the RFP letter, you are
requested to bid the network infrastructure tender titled “Request for
Proposal – Supply and Installation of Network Infrastructure System“.
This tender required you to prepare the comprehensive RFP document and
need you to study the detail requirement to develop the UMP campus
networking. Your proposal must include the information such as planning,
analysis, design, and so on, and have to prove the proposed network design
is the optimum communication for data transmission. The minimum technical
requirement as stated in the letter is as follows.
Request for Proposal – Supply and Installation of Network Infrastructure
System
Minimum Technical Requirements
Equipment included in the proposals need to at least meet the following minimum
requirements:
Cabling – fiber optic and UTP Cat 5e/6
Switch and Router can support user application
Server – basic network servers
Security issues
Inter-operable with existing equipment
Standards based routing protocols (OSPF, BGP, RIP, ISIS)
Multiple QoS levels
PoE Ready
VoIP Compliant
H323 Compliant
H225 Compliant
Support for AAA protocol
Multi-cast Compliant
Ability to monitor traffic flows
Handle multiple 1 gig connections at line rate.
Upgradable to 10 gig
Handle multiple 10 gig connections at line rate.
IPv4 and IPv6 compliant
COURSE: Network Analysis & Design MARK:
CODE: MCN1024 TOPIC:
ASSESSMENT: Project NO: TIME: /40
NAME: _________________________________________ MATRIC NO: ________________________________
Redundant backbone
Redundant critical server
Redundant/Hot swappable power supply
Provide Mean Time Between Failures
Centralized network management solution
Wireless
a. Interoperable for 802.11 a/b/g/n
b. Centralized management of Access Points
c. PoE ready
d. Interoperable with existing access points
Mode of Submission:
Prepare the report based on RFP document format.
Write in your own words. Do not plagiarize.
All reports must go through the plagiarism checking mechanism
before the Submission. You must have a copy of this plagiarism report.
Suggestion, use the “turnitin" software to check this matter.
No mark will be given for late submission
The students are required to present and submit in hardcopy (printed)
version for the report by: (a) week 6 (b) week 8 (c) week 10 (d)
week 13
Good Luck