s e w n b r a c e l e t m a d e u s i n g P RECI O SA T w i n ™ a n d P RECI O SA T e e ™ b e a d s
Candied almonds
Design by Helena Chmelíková
PRECIOSA TwinTM PRECIOSA TeeTM
117 01 323; 2.5 x 2.5 mm 111 01 364; 2 x 8 mm
PRECIOSA Rocailles
331 19 001; 10/0
PRECIOSA ORNELA introduces beads and seed beads
from the PRECIOSA Traditional Czech BeadsTM brand.
preciosa-ornela.com
s e w n b r a c e l e t m a d e u s i n g P RECI O SA T w i n ™ a n d P RECI O SA T e e ™ b e a d s Step 6: Step 10:
Thread the line through the T and the Tee Continue sewing the diamond.
strung in Step 5 in the opposite direction. Sew according to Steps 4-9 four times.
Candied almonds
String the second top T in the middle of the
stringing and thread the line through both Step 11:
holes. Add 1x T. After threading the line Sew the last diamond according to Steps
according to Step 5, thread both ends of the 4-7. Also thread the line through the second
Choose the now traditional and popular PRECIOSA Twin™ bead and the unusually shaped line through the outer T and their second hole of the last strung T. String 6x R10 on
PRECIOSA Tee™ bead from the extensive range of PRECIOSA Traditional Czech Beads™. holes. only one end. Thread the line again through
Be inspired by the tasteful color scheme of a chocolate bonbon with candied almonds and the hole in the T. Tie off both ends and sew
sew an interesting bracelet. them in.
Materials and tools: Step 2:
String 1x T and 6x R10. Slide them to the
PRECIOSA TwinTM (T) middle of the line. Thread the line through
117 01 323; 2.5 x 5 mm; everything one more time. Thread the line Step 7:
02010/86800 travertine; 121x through the hole in the T again. String 1x T. The second holes of the earlier Step 12:
Thread both ends through the second hole strung T. String a Tee on both ends of the Attach the fastening using the metal rings
PRECIOSA TeeTM (Tee) of the T. line. String 1x T. Thread the line through to the rocaille rings; the „circle“ with one
111 01 364; 2 x 8 mm; the earlier strung T. Thread the line ring and the „T-bar“ with three rings.
02010/25036 brown; 24x through the second hole in each protruding
T. String 1x T. Thread the line through the
PRECIOSA Rocailles (R10) Step 3: second hole of each protruding T.
331 19 001; 10/0; String 2x T on both ends. Also thread the
19102 bronze; 42x line through the second hole in the first
strung T.
- old bronze – an American fastening;
5 mm rings
Step 4:
String 1x Tee on both ends. Continue by
stringing 1x T. Thread the line through the Step 8:
second hole of the earlier strung T. String 3x R10 and 1x T. Thread the line
String 1x T and thread the line through both through the second hole of the T on the
holes. point and once again through the hole in
the T strung on the opposite end.
- a 0.20 mm nylon line; two thin needles;
scissors; flat nose pliers (for handling the
rings)
Step 5:
Now string 1x Tee, 3x T and 1x Tee on only
one end of the line. Thread the line through
the second hole of the earlier strung T.
String the top T from the diamond and
thread the line through both holes. Step 9:
String 1x T. Thread the line through the String 1x T and thread the line through the
Difficulty: earlier strung Tee. Connect the 3 T in the second hole of each previous T.
middle of the diamond. Thread the line
Procedure: through the Tee.
Step 1:
Cut off about 2 m of line. String needles on
both ends. You will alternately sew with
the right (the red line) and the left (the blue
line) ends.
