Electronic Training Equipment &

Breadboard / Accessories

Advanced Digital Training System ETS-5000

Feature
Specially Removable
AD-222 solderless breadboard can
be easily put into and taken off.
It is convenient for keeping the
individual experiment.

Reserve Fixed Holders

It is ideally suitable for various connectors.

Specifications
1. Solderless breadboard : AD-222 7. Two pulser switches :
Interconnected nickel plated 2712 tie points, fits all components A,A,B,B output
with DIP sizes and solid wire AWG #22-30 (0.3-0.8 mm). It can be Output level :
changed and replaced for different purposes and can be connected TTL : HI = 5V, LO = 0.1V
with demonstration panel. Therefore, it is very convenient for both CMOS : HI = + VDC, LO = 0.1V
teachers and students. 8. Eight data switches :
2. DC power supply : TTL : HI = 5V, LO= 0V
Fixed DC output : + 5V, 1 A CMOS : HI = +VDC, LO = 0V
Fixed DC output : -5V, 300 mA 9. Digital probe :
Variable DC output : +3V ~ +15V, 500mA Set mode selector switch to "TTL" position
Variable DC output : - 3V ~ - 15V, 500mA
3. Mode selector switch : Logic
Input Level Display
When the switch is put on "TTL" or "CMOS" position, the input Level
or output of pulse generator, pulser switches, 8 bits data switches, LO <0.8±0.2V L
digital probe, 8 bit LED display will meet the HI or LO level of "TTL" HI >2.3±0.2V H
or "CMOS" Open 0.8-2.3V O
4. Two digits of 7-segment LED display Transit LO-->HI P
5. Pulse generator :
(1) Duty cycle : 50% Set mode selector switch to "CMOS" position
(2) Frequency range : 1 Hz ~ 10 Hz
10 Hz ~ 100 Hz Logic
Input Level Display
100 Hz ~ 1K Hz Level
1K Hz ~ 10K Hz LO <30%+VDC ±10% L
10K Hz ~ 100K Hz HI >70%+VDC ±10% H
100K Hz ~ 1M Hz Open 30%~70%+VDC O
(3) Amplitude : 0 ~ 10Vpp Transit LO-->HI P
(4) TTL/CMOS mode output
TTL : + 5V
CMOS : +VDC (depends on the + VDC output) Memory : The two points besides 7 segment LED display will keep
6. Eight bits LED display : lighting while in "level transition"(LO --> HI or HI--> LO)
Set mode selector switch to "TTL" position 10. Universal connector : (optional)
It reserves fixed holders on the panel in order to be connected
with various connectors, for example :
Logic Standard accessory :
Input Level Display light up
Level ● UC-02 RS-232 D connector (25 pin female & male)
Optional accessories :
LO <0.8±0.2V Green ŸUC-01 : Card edge connector 2.54 mm 62 pin
HI >2.3±0.2V Red
ŸUC-03 : Straight header 60pin
Open 0.8-2.3V No display
ŸUC-04 : Card edge connector 3.96 mm 56 pin
11. Other standard accessories :
ŸPower code
Set mode selector switch to "CMOS" position
ŸTest probe
ŸPin : 6pcs
Logic ŸUser manual
Input Level Display light up
Level 12. Dimension :
325 x 250 x 95 mm (L x W x H)
LO <30%+VDC ±10% Green 13. Weight : 4.3kg
HI >70%+VDC ±10% Red
Open 30%~70%+VDC No display

10405 Electronic Training Equipment & Breadboard / Accessories 21