CHEMISTRY & PROCESS
SOLUTIONS
GB-2016
CHEMISTRY & PROCESS SOLUTIONS
Since more than 50 years, MECA-INOX is ball valve strategic partner of major chemistry and
process industries. For Petro Chemistry, Fine Chemistry and many Specialties, our stainless
steel and carbon steel valves are qualified and used for their performance, durability and
quality.
Designed, produced and tested in our two facilities of France and China, all our ball valves are
complying with European and International strictest standards.
“A CLASS” HELIUM TIGHTNESS
TA LUFT (FUGITIVE EMISSIONS) Molecules
Fine
Polymers Chemistry
Petro
Chemistry
Resins
Acids Fertilizers
& &
Bases Pesticides
CHEMISTRY & PROCESS SOLUTIONS
Steam
Specialty
(Paints, Adhesives, Inks,
Oils Flavors, Soaps, De-
tergents…)
Solvents
esins
TRANSPORT & STORAGE - FLUID MANAGEMENT
ATEX / PED / FIRE SAFE / FDA / ADR2015 …
Discover our range of more than 4 500 different manual and actuated ball valves, with standard
and special designs and material to find your specific solutions.
STANDARD HIGH QUALITY BALL VALVES
2 PCS BALL VALVES
DIN short pattern
• DN15 to DN100 – PN40
• DN100 and DN200 – PN16
DIN long pattern
• DN15 to DN100 – PN40
• DN100 – PN16
ACTUATION
• Standard & Specific Handles
• Pneumatic & Electric Actuators
• Gearbox for large size ...
Valves Ball Seats Body Seal
R2S TFM (PTFE) PTFE
PTFE
R2Z PTFE
20% PEEK
R2P PEEK PTFE
Carbon Steel minimum operation temperature
All plastic parts in the fluid line are -10°C (-20°C on demand)
based on FDA approved materials
316L stainless steel & A216WCB carbon st
TIGHTNESS & FLOW PERFORMANCES
EN12266-1 “A Class” : Spring washers
No bubble Helium External
Leak < 10-5 mbar/l.s-1
Vacuum Resistance down Gland in
stainless stell
to 10-3 mbar
Thrust seal
(PTFE reinforced PEEK)
CHEMISTRY & PROCESS SOLUTIONS
3 PCS BALL VALVES
DN08 to DN150 size
• PN100 to PN16
• All ends on demand (Butt Weld, Socket Weld,
BSP & NPT thread, compression fitting, Triclamp,
Orbital weld, SMS, Schedule, ISO, DSOD…)
Meca-Inox KIT BOX
• Time-saving when fitting (-40%)
• Protection of the components du-
ring installation
• Easy storage
Valves Ball Seats Body Seal
PS4 TFM (PTFE) PTFE
PTFE
PZ4 PTFE
20% PEEK
PP4 PEEK PTFE
PH4 HDPE HDPE
All plastic parts in the fluid line are
based on FDA approved materials
on steel, Certified Fire Safe versions on demand
Size ΔP=1bar ΔP=0,001 bar
Gland packing Full bore Kv (m3/h) Flow (m3/h)
(Antistatic following
ISO7121, EN1983) DN15 13 0,19
DN25 46 1,47
DN40 120 3,81
Minimum DN50 223 7,07
Flow Restriction DN65 423 13,37
DN80 617 19,52
Maximum
DN100 1154 36,49
Energy Savings DN150 2844 89,95
APPLICATION BALL VALVE
CORROSIVE FLUIDS - SPECIAL MATERIAL
304L, 904L, Alloy 22, Duplex
• PREn > 40
• High Acids (Nitric, Hydrochloric, Sulfuric…)
• High Concentration Salt Solutions
• Available DN08 to DN50
(DN65 to DN200 on demand)
SAFE ISOLATION - DOUBLE BLOCK & BLEED
PS4/PZ4 - DBB
• Double isolation & Line Bleeding
• Safe Maintenance
• Dangerous fluids
• Steam lines
• Available DN08 to DN150
CHECK VALVES & SIGHT GLASS
CL4
• Piston Check Valve - PN80
• -200°C to +180°C
• Available DN08 to DN50
VC4
• Pyrex glass
• PN7 to PN16
• Available DN08 to DN50
All plastic parts in the fluid line are based on FDA approved materials
APPLICATION BALL VALVE
INJECTION - SAMPLING - FLUSHING
PS4 - PE
• Online sampling
• Hot & corrosive fluids
• sampling ball volumes 10, 30, 50 & 100cc
• Specific connection designs on demand
PS4 – FC/DR/AFL
• Minimum retention area
• Tanks, Fluid Lines
• DN08 to DN100
• (True bore piggable on demand)
THERMAL MANAGEMENT - JACKETED VALVE
PZ4/R2Z - ET
• Stainless Steal Jacket (PN25)
• Steam & Thermal Oil compatible
• Agro Chemistry (Glucose, Palm Oil… )
• Bitumen & Crude Oil
• Available DN08 to DN150
CONTROL & REGULATION - V BALL
PZ4 – V30 & V60
• Fluid regulation (temperature, flow, pressure, pH…)
• Tight in close position
• Low cost regulation
• Accuracy ± 20%
Standard ball V60 ball V30 ball
HIGH QUALITY BALL VALVES
BORN IN FRANCE, WORLDWIDE AVAILABLE
GISORS
DALIAN
meca-inox.com
MECA-INOX A BRAND
UNE MARQUEOF
DUGROUP
GROUPE
1, rue de la Croix des Maheux
MECA-INOX CS 20805
F-95031 CERGY-PONTOISE CEDEX
1, rue de la Croix des Maheux T. + 33 (0)1 78 47 80 00
F-95031 CERGY-PONTOISE CEDEX infos@meca-inox.com
T. +33 1 78 47 80 00
infos@meca-inox.com meca-inox.com
