Scribd
Upload
91 views2 pages

GPS Navigation Guide

The document provides instructions for using a GPS receiver. It explains that the PAGE button is used to switch between screens, and that the user must be moving for the GPS to determine location and direction of movement. It also provides steps for marking a waypoint, changing its name, and navigating to a saved waypoint.

Uploaded by

bozzaitabob4493
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
91 views2 pages

GPS Navigation Guide

The document provides instructions for using a GPS receiver. It explains that the PAGE button is used to switch between screens, and that the user must be moving for the GPS to determine location and direction of movement. It also provides steps for marking a waypoint, changing its name, and navigating to a saved waypoint.

Uploaded by

bozzaitabob4493
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 2

Use the PAGE button on the top

right of the receiver to switch


between the different screens.

Go in the direction the arrow is pointing to


move towards your waypoint or landmark.

NOTE: You must be moving in order for


The dark bars show the satellites
the GPS unit to determine where you are
you are “locked” on. You need at
and which way you are moving.
least 3 bars to use the receiver.
1 – Press and hold the THUMB STICK until the MARK WAYPOINT screen appears
with the guy holding a flag.

2 – Your waypoint is automatically assigned a three-digit number. To


change the name of the waypoint, use the THUMB STICK button to
highlight its name. Use the THUMB STICK to select the new name for
the waypoint.

3 – When you are done, use the THUMB STICK to highlight the OK
button and press the THUMB STICK button once.

1 - Use the PAGE button to find the You can also press the bottom
main menu. Use the THUMB STICK to left button on the receiver to go
go to the FIND option and press the directly to the Find screen.
same button to select this option.

3 - Select WAYPOINTS by pressing the THUMB STICK button.

4 - Choose NEAREST on the next menu.

5 - Select the waypoint you want using the THUMB


STICK button.

6 - Use the THUMB STICK button to


select GOTO at the bottom of the screen.
Remember ...
You must be moving
in order for the
receiver to keep track 7 - Use the navigation screen to help you
of your location! locate your destination. You need to move
in the direction of the large arrow. When
you get close to your destination, an
“Arriving at Destination” message will be
displayed.

You might also like