Scribd
Upload
2K views13 pages

T.vst59 Upgrade Instruction V2.0

This document provides instructions for upgrading the software on MSD V59 products using different methods: 1. USB upgrade procedures are described for upgrading the software on TV sets and AD boards by copying software files to a USB drive and selecting a software update option in the TV's menu. 2. An ISP upgrade method involves using a serial port board, 4PIN cable, and ISP upgrade tool software to upgrade the software by connecting the board to a PC and selecting upgrade files. 3. Driver installation and usage of the ISP upgrade tool are explained, including configuring parameters, reading and writing upgrade files, and checking for a successful upgrade completion message.

Uploaded by

بوند بوند
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
2K views13 pages

T.vst59 Upgrade Instruction V2.0

This document provides instructions for upgrading the software on MSD V59 products using different methods: 1. USB upgrade procedures are described for upgrading the software on TV sets and AD boards by copying software files to a USB drive and selecting a software update option in the TV's menu. 2. An ISP upgrade method involves using a serial port board, 4PIN cable, and ISP upgrade tool software to upgrade the software by connecting the board to a PC and selecting upgrade files. 3. Driver installation and usage of the ISP upgrade tool are explained, including configuring parameters, reading and writing upgrade files, and checking for a successful upgrade completion message.

Uploaded by

بوند بوند
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 13

MSD V59 Upgrade Instruction V2.

upgrade bin file ............................................................................................................................................................. 2 

一、  USB upgrade procedures for TV set ................................................................................................................... 3 

二、USB upgrade procedures for AD Board ................................................................................................................ 3 

三、ISP upgrade method ............................................................................................................................................. 4 
MSD V59 Upgrade Instruction V1.0 

upgrade bin file 

Different  Board  may  need  software  with  different  name,  for  example,  VST59.A1A  which 

use the chipset TSUMV59XU only recognize software with the name of "bin_V59.bin" 

The names for other board is as below: 
T.VST59.A1A
T.VST59.91A T.VST59S.21A
A/D Board
T.VST59.A5A T.VST59S.81A
T.VST29.A2B
TSUMV59XU TSUMV59XUS
Chip
TSUMV59XE TSUMV59XES

Name bin_v59.bin bin_v59S.bin

Note： .bin is the extend file name.


一、  USB upgrade procedures for TV set

1. Copy the software to the root directory of your USB memory stick.

Plug the USB memory stick to the USB port.

2. Select "Software Update(USB)" on the OSD and follow the instructions.

TV will switch-off automatically when upgrading finishes.

3. If you find the process stop at 19% and the TV does not turn off, it means

the software in the board is the same as the one in the USB memory stick.

二、USB upgrade procedures for AD Board  

1. Make sure the board is dis-connected from the power.

2. copy the software to the root directory of your USB memory stick.

Plug the USB memory stick to the USB port.

3. Connect the power to the board, after a few seconds the LED will blink

rapidly, when the upgrading finishes the board will enter the standby mode.
三、ISP upgrade method 
 

1、Hardware tools 
1.1 USB Cable 

1.2 Serial port board B.CNSISP7A 
[you need to install the driver: Debug_board_driver(XP) ]

1.3 4PIN converted cable 
2、Connect 

      Connection as shown below 
 

Please note that there are two plugs on the board "",you should connect

the 4-pin cable to the correct plug on the board ""

3、Driver and Upgrading Applications   

USB_Board_Driver  和  ISP_Tool_4528 
3.1 To Install USB_Board_Driver,Please connect  PC  and  B.CNSISP7A 
with USB cable.

      Run Setup.Exe, select “Next” and "Next" and "Next" 
When you see some dialog window as below, select "Continues" 
Successfully installed 

[Note: you must connect USB tool before installation] 
3.2 Check if the installation was successful

Open  'Device  Manager',  if  you  find  the  device  like  Mstar  USB  Serial  Port  (Com10),  you 

have installed the driver successfully. 

 
Note: If you can not find that,just unplug the USB cable and connect again. 
Please allow the 'Found New Hardware Wizard' to search for driver by itself. 
4、Decompress ISP_Tool_4528.rar and you will get ISPISP_Tool.exe

4.1 Run ISPISP_Tool.exe, Click the button "config", set the parameter as

below:ISP 0x92, IIC:OXB2

4.2 Click “connect” to enter ISP Mode. 

4.2.1 Click  “connect”  to  enter  ISP  Mode.  If  it  connect  successfully,  it  will 

shown “Device Type” as the picture below
4.2.2 If it fail to connect, it will show “Can’t find the Device Type”

Note: If it fail to connect, please check: 
1、whether power is on. 
2、whether you have installed the driver successfully and you can find the device in the device manager 
3、whether the cable connection is correct. 
4.3 Switch to “Read” page, click “Read” then select the upgrade “bin” file.

4.4 Switch to “Auto” page, set the parameter as below:
click “Run” to start the upgrading. 
When upgrading it looks like: 

When it finishes, it looks like: 

You will find a 'Pass' in green ,if not re‐connect the power of the board, and upgrade again. 

You might also like