Scribd
Upload
3K views2 pages

16 As 2630 To 1

This document provides specifications for the ZF-AS Tronic 16 AS 2630 TO automatic transmission system for heavy trucks. It is a basic transmission with an input torque of max 2600 Nm and weight of around 252 kg without auxiliaries. It uses oil grade TE-ML 02 and has standard gear ratios ranging from 14.12 to 0.83. Diagrams show its installation dimensions and connections for additions like an Intarder unit or PTO.

Uploaded by

Casa Canteri
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
3K views2 pages

16 As 2630 To 1

This document provides specifications for the ZF-AS Tronic 16 AS 2630 TO automatic transmission system for heavy trucks. It is a basic transmission with an input torque of max 2600 Nm and weight of around 252 kg without auxiliaries. It uses oil grade TE-ML 02 and has standard gear ratios ranging from 14.12 to 0.83. Diagrams show its installation dimensions and connections for additions like an Intarder unit or PTO.

Uploaded by

Casa Canteri
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 2

16 AS 2630 TO ZF-AS Tronic (Truck)

Automatic transmission system for heavy trucks

16 AS 2630 TO - Basic transmission


16 AS 2631 TO - Transmission with Intarder
16 AS 2635 TO - Transmission with clutch-dependent PTO

Transmission type 16 AS 2630 TO

Input torque max. 2600 Nm

Weight * without auxiliaries ≈ 252 kg

Oil capacity for initial filling ≈ 13 dm 3

Oil grade as specified in ZF List of Lubricants TE-ML 02

Clutch bell housing SAE 1 integrated

Additional weight for ZF-Intarder ≈ 70 kg

Additional oil quantity for ZF-Intarder ≈ 10 dm 3

*without oil fill, clutch and clutch release components

Standard ratios in gear

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 R1 R2
14.12 11.68 9.54 7.89 6.52 5.39 4.57 3.78 3.09 2.56 2.09 1.73 1.43 1.18 1.00 0.83 13.07 10.81

see also Data Sheet for Intarder: IT_AS_Tronic_Truck_EN


2012-08

ZF Friedrichshafen AG • Lkw-Antriebstechnik • 88038 Friedrichshafen/Germany


Subject to technical change without notice. Tel. +49 7541 77- 0 • Fax +49 7541 77- 908000 • www.zf.com/truck-transmission
EN
16 AS 2630 TO

Installation dimensions

953
1 2 3 4
6.1
278

SAE 1
301

13 12 11 10 9 8 7 6.2 5

1 Electrical connection 7 Oil fill and oil level check


2 Breather 8 Oil drain
3 Gearshift module 9 Clutch module
4 Compressed air connection 10 Input
5 Output 11 Connection point for clutch-dependent PTO
6.1 Speedo sensor, transmission side 12 Compressed air connection
6.2 Speedo sensor, vehicle side 13 Oil drain

953

1 2 3 4 5 6
278

484
305

622.5
300 285.5 1245

1 Option to fit steering pump drive 4 ZF-Intarder unit


2 Connection for PTO 5 Oil / water heat exchanger
3 ZF-AS Tronic transmission
2012-08

Pictures: 031396; 018930_1; 027896_3


ZF Friedrichshafen AG • Lkw-Antriebstechnik • 88038 Friedrichshafen/Germany
Subject to technical change without notice. Tel. +49 7541 77- 0 • Fax +49 7541 77- 908000 • www.zf.com/truck-transmission
EN

You might also like