Scribd
Upload
334 views2 pages

175 022503

The document outlines inspection and testing requirements for socket weld and threaded flanges according to ASME B16.5 and other specifications. It lists various requirements including: 1) Visual inspection to be witnessed by an inspector and certificates/records to be checked. 2) In-process inspections like heat treatment, mechanical testing, grain size checks, and magnetic particle or liquid penetrant testing per applicable ASME and ASTM standards. 3) Final inspections including dimensional checks, inspection of gasket faces, markings, protective coatings, and special dimensions if required, according to ASME and industrial standards.

Uploaded by

Abu Anas M.Salaheldin
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
334 views2 pages

175 022503

The document outlines inspection and testing requirements for socket weld and threaded flanges according to ASME B16.5 and other specifications. It lists various requirements including: 1) Visual inspection to be witnessed by an inspector and certificates/records to be checked. 2) In-process inspections like heat treatment, mechanical testing, grain size checks, and magnetic particle or liquid penetrant testing per applicable ASME and ASTM standards. 3) Final inspections including dimensional checks, inspection of gasket faces, markings, protective coatings, and special dimensions if required, according to ASME and industrial standards.

Uploaded by

Abu Anas M.Salaheldin
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 2

INSPECTION & TESTING REQUIREMENTS REVISION: 02/13/2013 CODE NUMBER: PAGE:

SAUDI ARAMCO FORM-175 REPLACES: IR022503 1 of 2


SCOPE: FLANGES: Socket weld and Threaded, All materials covered by ASME B16.5

TEST AND INSPECTION PER: ASME B16.5 and Specifications As Noted Below

(1) VISUAL INSPECTION WITNESSING BY INSPECTOR (Note 1)


(2) CERTIFICATES / RECORDS TO BE CHECKED BY INSPECTOR
(3) CERTIFICATES / DATA TO BE PROVIDED BY VENDOR / SUPPLIER / MANUFACTURER
0010
0010
***X
Pre-Fabrication/Production Requirements
Forging Process procedure
Specification Details / Notes:
All flanges must be forged, cast flanges are not permitted

0020 X Material Test Reports of Cast or Heat Analysis, Product analysis Per Applicable ASTM
and Carbon equivalent

0030 X NDT Procedures and Personnel Verify valid personnel qualification and approved procedure

0020
0010
***X X
In process inspection & test requirement
Heat Treatment
Specification Details / Notes:
Per Applicable ASTM

0020 X X Mechanical Testing: Tensile Test, Impact test and Hardness test Per Applicable ASTM

0030 X X Grain Size Per Applicable ASTM

0040 X X Magnetic Particle Testing and Liquid penetrant Testing Per Applicable ASTM or 10% of each lot whichever is greater

0030
0010
***X
Final inspection & test requirements
Dimensional Inspection
Specification Details / Notes:
ASME B16.5 / Industrial Standard and approved drawings

0020 X Inspection of Gasket face Surface Per ASME B16.5

0030 X Markings Utilize respective ASME standards

0040 X Protective Coating, End Covers & Packaging If required

0050 X Special Flange Dimensions (when applicable) Apply the approved #Special Design#.

0040
0010
*** Additional/Supplemental Requirements
Other if any per PO
Specification Details / Notes:

IR022503 Continued...
INSPECTION & TESTING REQUIREMENTS REVISION: 02/13/2013 CODE NUMBER: PAGE:
SAUDI ARAMCO FORM-175 REPLACES: IR022503 2 of 2
(1) VISUAL INSPECTION WITNESSING BY INSPECTOR (Note 1)
(2) CERTIFICATES / RECORDS TO BE CHECKED BY INSPECTOR
(3) CERTIFICATES / DATA TO BE PROVIDED BY VENDOR / SUPPLIER / MANUFACTURER
Notes:
(1) May only be waived by the responsible Saudi Aramco, ASC, or AOC Inspection Offices.
(2) See form SA 175 -000003 for instructions on using this form.

End of IR022503

You might also like