Concure P constructive solutions
Polymer emulsion, liquid membrane,
concrete curing compound
Uses and other products for use with fresh and hardened
concrete.
Concure P provides a film of high water retention enabling
curing of the concrete by reducing loss of water from the Properties
concrete. Concure P
Advantages Specific gravity
o
at 25 C : 1.020 – 1.030
Reduces surface shrinkage and cracking by
Colour : Milky white
eliminating moisture loss from exposed surfaces.
Dry film colour : Clear film
Enables cement to hydrate more efficiently. Dry film (approx) : 1 – 2 hours
Easy application reduces labour costs. Application Instructions
Save time, can be applied as soon as possible after Application
finishing concrete.
Stir contents thoroughly before using. Spray Concure P as
Eliminates need for damp hessian, sand or evenly as possible over the freshly laid concrete as soon
polyethylene. as possible after final trowelling when the surface water
Fast forming film dries within 60 – 120 minutes, has disappeared (approx. 1-2 hours depending on the
depending on ambient temperature and site ambient temperature and atmospheric conditions). If spray
conditions. equipment is not available, apply with a soft brush, broom
or wide nap roller as soon as the concrete surface is hard
Forms a non-staining continuous clear film on clean
enough. Apply to vertical surface immediately after the
stain free concrete or render surfaces. Is easily
formwork has been removed. Apply at an even coverage
applied and free from discolouration. 2
rate of not greater than 6 m per litre.
Non-flammable and non-toxic under normal usage
Ensure the concrete surface is completely free of stains,
and is supplied ready for immediate use.
oils, from coatings, etc., to obtain good adhesion of
Can be overcoated with specific after-trade, e.g. Concure P and of any other trades, and to avoid obtaining
rendering painting, etc. discolouration or uneven surface effects.
Description Cleaning
Concure P is a polymer emulsion liquid membrane curing Immediately after use, the spraying equipment should be
compound, milky white in colour and cures to a clear film. cleaned out, especially the line and nozzle, with water.
It consists of a stable emulsion based on suitably Spraying Equipment
processed non-toxic P.V.A. emulsion, plasticisers, etc.
For the application of Concure P various types of spraying
Concure P white pigment is available for specified usage
equipment can be supplied, i.e. Knapsack or motorized
where light reflectance properties are required.
sprayer.
Technical Support
Limitations
Fosroc provides a technical advisory service for on-site
Do not use Concure P on areas where after painting and
assistance and advice on curing membrane selection,
rendering are carried out, or where back water pressure or
evaluation trials and dispensing equipment. Technical
condensation are expected to occur.
data and guidance can be provided for curing membrane
Page 1
Concure P
Do not apply onto stained, oil or contaminated concrete or Additional Information
render surfaces, which can cause change of colour, non-
Fosroc manufactures a wide range of complementary
uniformity or inhibit the bond of subsequent surface
products which include :
treatment.
concrete admixtures and cement grinding aids
Do not dilute Concure P with solvent.
waterproofing membranes & waterstops
Storage
joint sealants & filler boards
All containers must be kept sealed and stored under cover
with no exposure to the sun. cementitous & epoxy grouts
Precautions specialised flooring materials
Health and Safety Fosroc additionally offers a comprehensive package of
products specifically designed for the repair and
If contact with the resin occurs, the skin should be washed
refurbishment of damaged concrete. Fosroc’s ‘Systematic
with soap and water. Do not use solvent. Goggles should
Approach’ to concrete repair features the following :
be worn when spraying with a short lance. Any eye
contamination should be washed with plenty of water and hand-placed repair mortars
medical treatment sought. When used in enclosed areas, spray grade repair mortars
good ventilation must be provided.
fluid micro-concretes
Fire
chemically resistant epoxy mortars
Concure P is non-flammable and non-toxic under normal
usage. anti-carbonation/anti-chloride protective coatings
Estimating and Packaging chemical and abrasion resistant coatings
Coverage For further information on any of the above, please consult
your local Fosroc office - as below.
2
Not greater than 6m /litre.
Packaging
25 litre containers and 210 litre drums
Important note
Fosroc products are guaranteed against defective materials and manufacture and are sold subject to its standard Conditions for the
Supply of Goods and Services, copies of which may be obtained on request. Whilst Fosroc endeavours to ensure that any advice,
recommendation, specification of information it may give is accurate and correct, it cannot, because it has no direct or continuous control
over where or how its products are applied, accept any liability either directly or indirectly arising from the use of its products, whether or
Fosroc Sdn. Bhd. not in accordance with any advice, specification, recommendation of information given by it.
No 8 Jalan Trompet, 33/8
Seksyen 33, 40400 Shah Alam telephone: fax: email:
Selangor, Malaysia. +60 3 5191 5660 +60 3 5191 6960 malaysia@fosroc.com
Branch Office:
+60 4 2287 464 +60 4 2292 661
29, Jalan Zainal Abidin,
10400 Penang, Malaysia.
www.fosroc.com Page 2 MAL/0301/06/A
