Scribd
Upload
155 views2 pages

1

This document provides specifications for painting and coating above ground pipe field weld joints and repair materials. It lists the surface profile, primer, intermediate, and top coats for different fluid services. It also describes heat shrink sleeves, cold applied tapes, heat applied patches, and melt sticks for coating repairs to 3LPE coated pipe, including the products, manufacturers, and surface finishes. Documentation requirements are listed for material inspection, weather monitoring, surface preparation, installation, and testing.

Uploaded by

Sam Jose
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as DOCX, PDF, TXT or read online on Scribd
155 views2 pages

1

This document provides specifications for painting and coating above ground pipe field weld joints and repair materials. It lists the surface profile, primer, intermediate, and top coats for different fluid services. It also describes heat shrink sleeves, cold applied tapes, heat applied patches, and melt sticks for coating repairs to 3LPE coated pipe, including the products, manufacturers, and surface finishes. Documentation requirements are listed for material inspection, weather monitoring, surface preparation, installation, and testing.

Uploaded by

Sam Jose
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as DOCX, PDF, TXT or read online on Scribd
You are on page 1/ 2

1.0.

PAINT SYSTEM – A; FOR ABOVE GROUND PIPE FIELD WELD JOINTS

Surface Primer Coat Second Coat Third Coat DFT


Fluid RAL Code Total
Profile DFT Generic / DFT Generic / DFT
Finish Generic / Manufacturer ( µm)
µm ( µm) Manufacturer ( µm) Manufacturer ( µm)

2Pack Zinc Rich Epoxy / 2 Pack Epoxy / Polyurethane /


General Process 9006 Silver Sa2.5 35-60 75 150 50 275
Amercoat 68G Amercoat 310 Amercoat 450H

6024 Safety 2Pack Zinc Rich Epoxy / 2 Pack Epoxy / Polyurethane /


Utility Water Sa2.5 35-60 75 150 50 275
Green Amercoat 68G Amercoat 310 Amercoat 450H

Instrument Air & 2Pack Zinc Rich Epoxy / 2 Pack Epoxy / Polyurethane /
5012 Safety Blue Sa2.5 35-60 75 150 50 275
Plant Air Amercoat 68G Amercoat 310 Amercoat 450H

2Pack Zinc Rich Epoxy / 2 Pack Epoxy / Polyurethane /


Fire Water 3000 Signal Red Sa2.5 35-60 75 150 50 275
Amercoat 68G Amercoat 310 Amercoat 450H

Surface
Type of sleeve Location of Application Product / Category Manufacture
Finish Profile µm
Covalence HTLP80 / Heat Shrink Sleeve Covalance SA2.5 30-80
Covalence S1401M / Epoxy Primer Covalance SA2.5 30-80
3LPE Coated Pipe to Pipe Weld
Heat Shrink Covalence PERP80 / Heat Applied Patch (Repair
Joint Covalance SA2.5 30-80
Material)
Covalence S1137 / Filler (Repair Material) Covalance SA2.5 30-80

Fittings Serviwrap R30B / Cold Applied Tape Serviwrap SA2.5 30-80


Serviwrap Primer AB / Anti-Corrosion Primer Serviwrap SA2.5 30-80
Cold Applied
3LPE Coated Pipe to Fitting Joint Serviwrap R30B / Cold Applied Tape Serviwrap SA2.5 30-80
Serviwrap Primer AB / Anti-Corrosion Primer Serviwrap SA2.5 30-80
3LPE Coating Repair Material for Covalence PERP80 / Heat Applied Patch Covalance SA2.5 30-80
Heat Applied Patch Damage Extend To The Bare
Metal Covalence S1137 / Filler Covalance SA2.5 30-80
3LPE Coating Repair Material for Covalence PE / Melt Stick Covalance SA2.5 30-80
Melt Stick Damage Does Not Extend To The
Bare Metal Covalence S1137 / Filler Covalance SA2.5 30-80
Material Inward Inspection Report

Weather Monitoring Log

Surface Preparation & Painting Report

Heat Shrink / Cold Sleeve Installation Report

Inspection Report

Holyday Detection Test Report

You might also like