Vijayanagar Works
ADVANTAGES
• Slag sand is an environment
friendly alternative to fast
• Suitable Size gradation (0–4.75
depleting and scarce river sand. mm)
• Controlled Physical and Chemical
• Slag sand is not derived from Properties
any natural resource neither
• Near Cubical Particle Shape
from river bed nor from
crushing rocks. • No deleterious material (silt, clay
and marine impurities)
• Slag Sand is a proven material • Available through out the year
for replacing natural sand / • Eco-friendly product - helps
crushed fine aggregates. conserve rivers and rocks.
• Suitable for all civil works like
• It is regularly used in civil backfill earth cover, embankment,
construction in all developed sub base for roads, sand
compaction, drainage layers and
countries. fine aggregates for concrete and
asphalt.
COMPLIANCE : SLAG SAND CONFIRMS TO IS–383 SPECIFICATIONS
COMPARISON TO RIVER SAND
RIVER SAND BF SLAG SAND LD SLAG SAND
“Slag Sand” is a non-metallic product, consisting essentially of glass containing
silicates and alumino-silicates of lime. Slag is a byproduct of metal smelting
processes, manufactured under controlled conditions. The granulated slag is
obtained by rapidly cooling (quenching) the molten slag from the furnace by
means of water.
Blast Furnace Slag Sand LD Slag Sand
Blast Furnace LD Converter
PROPERTIES
Tramp
Composition SiO2 FeO Al2O3 CaO MgO Sulphur
Elements
BF Slag Sand 30 - 35 0.2 – 0.4 8 – 15 30 - 35 5 – 10 0.5 – 1.2 < 0.001
LD Slag Sand 10 - 13 20 – 25 3–4 38 – 45 6 – 10 0.62 – 0.64 < 0.001
RIVER BF Slag LD Slag
PROPERTIES
SAND Sand Sand
IS SIEVE
Specific Gravity 2.60 2.67 3.69 BF Slag LD Slag
%
Water Absorption, % 2.0 1.0 0.8 Sand Sand
Passing
Silt %, Wet Sieving 2.2 <1.5 1.5
Clay Lumps Nil Nil Nil 4.75 mm 99.50 100
Organic Impurities Nil Nil Nil 2.36 mm 94.75 90
Total Deleterious Material 0.2% Nil Nil
1.18 mm 70.20 45
LBD, Loose Bulk Density, kg/l 1.4 1.3 1.88
CBD, Compact Bulk Density, kg/l 1.6 1.2 2.07 600 μ 39.70 23
Na2SO4 Soundness Loss, % 2.5 - 3.0 12 < 12 300 μ 7.40 10
Moh’s Hardness 5-7 5-6 6-7
150 μ 1.95 3
California Bearing Ratio, % (up to) 25 - 30 250 300
Angle of Internal Friction 35 - 40 40 - 45 40 - 50
COARSE MEDIUM FINE
4.75 mm – 1.18 mm 1.18 mm – 600 μ 600 μ – 150 μ
Slag sand can be screened and supplied to desired gradation on request.
BRIDGES ROADS
COMMUNITY BUILDINGS CONCRETE AGGREGATES
FOOTPATHS SHORE PROTECTION
Ideal material for civil engineering works and can be used as ground
improvement material, backfill material, earth cover material, embankment
material, road subgrade improvement material, sand compaction material,
ground drainage layers, fine aggregate for concrete, aggregate for asphalt
concrete etc.
P.O. Vidyanagar, Toranagallu, Dist: Bellary-583275, Karnataka Tel: (08395) 250120-30
Send Queries to : slag.sand@jsw.in Tel: (08395) 243260, Cell: 09480693974