w w w.da eyang. co.

kr

Daeyang Electric

HEAD OFFICE

503, Sinpyeong-dong, Saha-gu, Busan, Korea

Tel. 82-51-200-5212, 5221, 5291, 5294, 5281

Fax. 82-51-200-5210

DAEYANG INSTRUMENT CO.,LTD.

502, Sinpyeong-dong, Saha-gu, Busan, Korea

Tel. 82-51-200-5212, 5221, 5291, 5294, 5281

Fax. 82-51-200-5210 Indoor Light

Outdoor Light

SEOUL OFFICE Navigation Light & Signal Light

4F Subon Bldg, 112-19, Samseong-dong Hazardous Area Light

Gangnam-gu, Seoul, Korea. Receptacle & Switch

Tel. 82-2-715-3492~3 Fax. 82-2-715~3495 Reefer Container Receptacle

New Product & LED

DAEYANG ELECTRIC SUPPLY CO.,LTD.

317-2, Gupyeong-dong, Saha-gu, Busan, Korea Lighting for marine use

Tel. 82-51-414-9937~9 Fax 82-51-414-9940

www.daeyang.co.kr

Printed in Korea September 2009 |

Published by Daeyang Electric |
Designed by Daeyang Design-Team
 Lighting for Marine Use 2010-2011
Daeyang Electric

Lighting for Marine Use 2010-2011

Printed in Korea September 2009
Published by Daeyang Electric
Designed by Daeyang Design Team

Head office
503, Sinpyeong-dong Saha-gu, Busan, Korea.
Tel. 82-51-200-5212, 5221, 5291, 5294, 5281
Fax. 82-51-200-5210

Seoul office
4F Subon Bldg, 112-19, Samseong-dong
Gangnam-gu, Seoul, Korea.
Tel. 82-2-715-3492~3 Fax. 82-2-715~3495
Lighting for Marine Use 2010-2011 Lighting for Marine Use 2010-2011

History Organization

History of Daeyang

Since
2004-06 Communication System team

1977
Certified by BASEEFA 2001 ATEX for Offshore System team
explosion proof lighting equipment. Sensor System team
Lighting System team
2004-09 Design Team
Completed the development WICS LED System team
(Wireless Interior Communication System) Environment System team
Plant System team
2004-12
Completed the development of Ni-Rh
electronic reflector R&D
CENTER
2005-05
Expanded & moved Noksan factory
for Fan & Ventilation Division

1977-05
2006-06
DAEYANG Electric Co., Ltd. founded. Administration Planning Team
Certified as “INNO-BIZ” company by
1995-08
Division MIS Team
Small and Medium Business Admin- General Affairs Team
1977-12
Nominated as one of the most prom- istration (SMBA) Accounting Team
Designated as manufacturer of ma-
inent medium-sized enterprises with Procurement Team
rine electric equipments by Ministry
advanced technologies by ministry of 2006-11
of Commerce and Industry.
commerce and industry Co-developed with KORDI an Un-
manned Underwater Vehicle(UUV)
1984-04
1996-12 for deep sea exploration at 6,000m
Moved main office & factory to cur-
Certified by LRQA for ISO 9001- Sales Instrument
depth in the ocean successfully
rent location. (Shinpyong, Busan) Division Division
DAEYANG Electric Co., Ltd.
2007-1 
1985-09
2000-07 Established design research center
Selected as an “Excellent Exporting Com- Marine Sales Team 1
Selected by “Small & Medium Busi- for interior lighting equipments of Instrument Design Team
pany” by the Korea Development Bank. Marine Sales Team 2
ness Administration” for “Venture cruise in Seoul Instrument Production Team
Railroad Sales Team
Company” Assurance Team
1988-03 Military Sales Team
Instrument Quality
2007-2 Overseas Sales Team
Established an affiliated company,
2001-11 Completed the development of LED Seoul Sales Team
DAEYANG Instrument Co.,Ltd. Lighting Fan
Awarded the “Bronze Tower Order” flat lighting equipments.  Operating Control Team
Division Division
for contribution to industry by Ministry
1988-12
of Commerce, Industry and Energy 2007-5 
DAEYANG R&D center founded.
Awarded the “Export Tower” by Min- Certified by IEC Ex for explosion
Lighting Design Team Elecrtical Fan Design Team
istry Awarded the “Leading Company” proof lighting equipments.
1989-01 Lighting Production Team Electronic Fan Production Team
by Ministry of commerce, Industry and
Established an affiliated company, Lighting Quality Assurance Team Division Fan Quality Assurance Team
Energy 2007-7  
DAEYANG Electric Supply Co., Ltd. Fan Administration Team
Certified by LCIE with ATEX Ex for
2002-11 explosion proof lighting equipments.  Electrical Design Team
1990-11
Certified by LRQA for ISO 9001-2000 Electronic Design Team
Selected as a defense industry Electrical/Electronic Production Team
DAEYANG Electric Co., Ltd. & DAEYANG 2008-7
company by the Ministry of National Electrical/Electroni Quality Assurance Team
Instrument co., Ltd. Completed the development of new
Defense
explosion proof lighting equipments
2003-02 for land use
1992-03
Selected as a “National Manufacture
Signed a technical license agreement
Research center” by Korean Ministry 2008-11
with WITT & SOHN, Germany
of Commerce, Industry and Energy. Certified by LRQA for ISO 14001-
DAEYANG Electric Co., Ltd.
1992-04
2003-09
Certified by BASEEFA for explosion
Completed the development of 2009-06
proof lighting equipment
Goniometer Developed LED lighting for indoor use
Lighting for Marine Use 2010-2011

Certification Contents
Indoor Light
Watertight Fluorescent Light 12
Non-Watertight Fluorescent Light 15
Baseefa(2001) certificate Berth Light 23
LCIE certificate Desk Light 25
Mirror Light 27
Class certificate (ABS, Watertight Incandescent Light 28
DNV, KR, LR, GL, BV, NK, Non-Watertight Incandescent Light 29
Decoration Light 36
RINA, CCS)
EXIT-Light 46
Government certificate
KIPO certificate Outdoor Light
Watertight Fluorescent Light 52
ISO 14001 Watertight Incandescent Light 54
Flood Light 63
ISO 9001:2000 Search Light 77
AS 9100
Single PPM Navigation Light & Signal Light
CE certificate Navigation Light 84
Signal Light 86
U.L certificate Light Control Panel 92

KOSHA certificate
Hazardous Area Light
KGS certificate Hazardous Fluorescent Light 100
KIMM certificate Hazardous Incandescent Light 105
Hazardous Flood Light 112
ATEX certificate
Hazardous Junction Box 122
Hazardous Switch 124

Receptacle & Switch

Watertight Receptacle 129
Watertight Switch 132
Watertight Receptacle with Switch 136
Watertight Plug 138
Watertight Receptacle for Container 140
Watertight Junction box 143
Non-Watertight Receptacle 145
Non-Watertight Switch 154

Certification of
Approval
Non-Watertight Plug 161
Non-Watertight Junction box 163

Reefer Container Receptacle

Reefer Container Receptacle 166

New product & LED

Hazardous Flood light 175
LED Accommodation deco light 176

www.daeyang.co.kr 6 www.daeyang.co.kr 7
 Product List

Watertight Fluorescent Light

FL-WS-S 12 FL-WS-TH 13

Surface Ceiling Light Surface Ceiling Light

FL-WF 14
Recessed Ceiling Light

Non-Watertight Fluorescent Light

INDOOR LIGHT
FL-NS 15 FL-NS-J 16

Surface Ceiling Light Surface Ceiling Light

FL-NF 17 FL-NF-B15N 18

Recessed Ceiling Light Recessed Ceiling Light (B-15)

Product List
FL-NFD 19 FL-NFD-B15 20

Recessed Dampa Ceiling Light Recessed Dampa Ceiling Light

(B-15)

FL-NL 21 FN-NS 22

Decorative Recessed Corner Light

Ceiling Light

Berth Light
FB 23 FB-NS 24

Fluorescent Berth Light Berth Light

Desk Light
FD 25 FD-NS 26

Fluorescent Desk Light Fluorescent Desk Light

INDOOR LIGHT
www.daeyang.co.kr 9
 Product List Product List

Mirror Light Decoration Light

FM 27 IT-S 40 FW-AN 41
Fluorescent Mirror Light Stand Light Wall Light

FW-SA 42 PD-WAR 43

Watertight Incandescent Light Wall Light Wall Light

ID-U 28
Incandescent Dome Light

PD-WAT 44 PD-WAH 45

Wall Light Wall Light

INDOOR LIGHT

INDOOR LIGHT
Non-Watertight Incandescent Light
HC 29 IC 30

Halogen Chart Table Light Incandescent Chart Table Light Exit Light
EXIT-NF 46 EXIT-NS 47

Exit Light Exit Light

IR-AC 31 IR-DC 32

Product List
Product List

Incandescent Recessed Incandescent Recessed

Round Light Round Light

MIS 33 IT-D 34

Incandescent Spot Light Incandescent Folding

Table Light

IO-01 35
Incandescent Down Light

Decoration Light
FO-NF 36 FC-NS 37

Fluorescent Down Light Fluorescent Ceiling Light

ID-01 38 ID-02 39

Wall Light Wall Light

www.daeyang.co.kr 10 www.daeyang.co.kr 11
 Lighting for Marine Use 2010-2011 Lighting for Marine Use 2010-2011

FL-WS-S Surface Ceiling Light IP56 FL-WS-TH Surface Ceiling Light IP44
Application Application
Engine room, hold, laundry, store Galley, laundry, store
Chemical processing and industrial
areas Protection degree IP44

Protection degree IP56 Materials

Body : Stainless steel deep drawn
Materials Diffuser : Clear polycarbonate
Body : Electro zinc coated steel sheet
deep drawn Finish
Diffuser : Clear polycarbonate Body : White epoxy powder coat and
Latch : Stainless steel stove enamelled(Munsell No. N-9.3)

Finish Equipment
Body : White epoxy powder coat and Fluorescent lamp : 18/36W
stove enamelled(Munsell No. N-9.3) Light sources : T26
INDOOR LIGHT

INDOOR LIGHT
Lamp base : G13
Equipment Two cable inlet holes
Fluorescent lamp : 18/36W (Diameter : Max.16mm cable)
Light sources : T26
Lamp base : G13 Electrical
Four cable glands 20a~c AC100~240V, 50/60Hz are available
(Diameter : Max.16mm cable) on request
Ballast : Glow, Electronic
Electrical
AC100~240V, 50/60Hz are available
on request

Watertight Fluorescent Light

Ballast : Glow, Electronic
Watertight Fluorescent Light

TERMINAL BOX COAMING

Technical Drawing Light Distribution Curve [Cd / 1000lm] Technical Drawing Light Distribution Curve [Cd / 1000lm]

120° 120° 120° 120°

35 30

90° 90° 90° 90°

35 30

60° 70 60° 60° 60 60°

105 90

140 120
30° 30° 30° 30°

Specification Option - Emergency DC Lamp - Battery back-up

Model No. Capacity L(mm) W(mm) H(mm) Weight(Kg) Remarks

FL120WS-GISWNM 18W X 1 706 220 135 4.43 Specification Option - Emergency DC Lamp

FL220WS-GISWNM 18W X 2 706 220 135 5.18 Model No. Capacity L(mm) W(mm) H(mm) Weight(Kg) Remarks
FL140WS-GISWNM 18W X 1 1312 220 135 6.72 FL220WS-GISTH 18W X 2 704 185 78 3.87
FL240WS-GISWNM 18W X 2 1312 220 135 7.70 FL240WS-GISTH 36W X 2 1314 185 78 6.47

www.daeyang.co.kr 12 www.daeyang.co.kr 13
 Lighting for Marine Use 2010-2011 Lighting for Marine Use 2010-2011

FL-WF Recessed Ceiling Light IP44 FL-NS Surface Ceiling Light IP20
Application Application
Galley, laundry Passage way, corner

Protection degree IP44 Protection degree IP20

Materials Materials
Body : Electro zinc coated steel sheet Body : Electro zinc coated steel sheet
Diffuser : Opal acryl Diffuser : Opal acryl

Finish Finish
Body : White epoxy powder coat and Body : White epoxy powder coat and
stove enamelled(Munsell No. N-9.3) stove enamelled(Munsell No. N-9.3)

Equipment Equipment
Fluorescent lamp : 18/36W Fluorescent lamp : 18/36W
Light sources : T26 Light sources : T26
INDOOR LIGHT

INDOOR LIGHT
Lamp base : G13 Lamp base : G13
Four cable glands : PG16 Six cable inlet holes
(diameter : Max 16mm)
Electrical
AC100~240V, 50/60Hz are available Electrical
on request AC 100~240V, 50/60Hz are available
Ballast : Glow, Electronic on request
Ballast : Glow, Electronic

Non-Watertight Fluorescent Ligh

Watertight Fluorescent Light

Technical Drawing Light Distribution Curve [Cd / 1000lm] Technical Drawing Light Distribution Curve [Cd / 1000lm]

120° 120° 120° 120°

75 30

90° 90° 90° 90°

75 30

60° 150 60° 60° 60 60°

225 90

300 120
30° 30° 30° 30°

Specification Option - Emergency DC Lamp - Dimming - Battery back-up Specification Option - Emergency DC Lamp - Dimming - Battery back-up

Model No. Capacity L(mm) W(mm) H(mm) Weight(Kg) Remarks Model No. Capacity L(mm) W(mm) H(mm) Weight(Kg) Remarks
FL120WF-GIS 18W X 1 743 233 112 4.82 FL120NS-GIS 18W X 1 660 167 65 3.54

FL220WF-GIS 18W X 2 743 233 112 6.80 FL220NS-GIS 18W X 2 660 167 65 3.91

FL140WF-GIS 18W X 1 1353 233 112 7.43 FL140NS-GIS 18W X 1 1280 167 65 5.32

FL240WF-GIS 18W X 2 1353 233 112 9.41 FL240NS-GIS 18W X 2 1280 167 65 7.01

www.daeyang.co.kr 14 www.daeyang.co.kr 15
 Lighting for Marine Use 2010-2011 Lighting for Marine Use 2010-2011

FL-NS-J Surface Ceiling Light IP20 FL-NF Recessed Ceiling Light IP20
Application Application
Passage way, corner Accommodation area, saloon,
dining hall
Protection degree IP20
Protection degree IP20
Materials
Body : Electro zinc coated steel sheet Materials
Diffuser : Opal acryl Body : Electro zinc coated steel sheet
Diffuser : Opal acryl / Red acryl
Finish
Body : White epoxy powder coat and Finish
stove enamelled(Munsell No. N-9.3) Body : White epoxy powder coat and
stove enamelled(Munsell No. N-9.3)
Equipment
Fluorescent lamp : 18/20W Equipment
Light sources : T26 Fluorescent lamp : 18/36W
INDOOR LIGHT

INDOOR LIGHT
Lamp base : G13 Light sources : T26
Two cable inlet holes Lamp base : G13
(diameter : 30mm) Six cable inlet holes
(diameter : Max.16mm)
Electrical
AC 100~240V, 50/60Hz are available Electrical
on request AC 100~240V, 50/60Hz are available
Ballast : Glow, Electronic on request
Ballast : Glow, Electronic

Non-Watertight Fluorescent Ligh

Non-Watertight Fluorescent Ligh

Technical Drawing Light Distribution Curve [Cd / 1000lm] Technical Drawing Light Distribution Curve [Cd / 1000lm]

120° 120° 120° 120°

40 40

90° 90° 90° 90°

40 40

60° 80 60° 60° 80 60°

120 160

160 200
30° 30° 30° 30°

Specification Option - Emergency DC Lamp - Dimming - Battery back-up

Specification Option - Emergency DC Lamp - Dimming - Battery back-up Model No. Capacity L(mm) W(mm) H(mm) Weight(Kg) Remarks
Model No. Capacity L(mm) W(mm) H(mm) Weight(Kg) Remarks FL120NF-GIS 18W X 1 680 184 100 3.80
FL320NS-GJS 20W X 3 750 282 65 3.54 FL220NF-GIS 18W X 2 680 184 100 4.21
FL320NS-GJS 20W X 3 750 282 65 3.56 5W FL140NF-GIS 18W X 1 1295 184 100 5.79
FL320NS-GJS 20W X 3 750 282 65 3.56 10W FL240NF-GIS 18W X 2 1295 184 100 7.48

www.daeyang.co.kr 16 www.daeyang.co.kr 17
 Lighting for Marine Use 2010-2011 Lighting for Marine Use 2010-2011

FL-NF-B15N Recessed Ceiling Light (B-15) IP20 FL-NFD Recessed Dampa Ceiling Light IP20
Application Application
Accommodation area, saloon, Accommodation area, saloon,
dining hall, passage ways dining hall

Protection degree IP20 Protection degree IP20

Fire class : B-15
Materials
Materials Body & Globe flame : Electro zinc
Body : Electro zinc coated steel sheet coated steel sheet
Globe flame : Aluminum Diffuser : Opal polycarbonate
Diffuser : Opal polycarbonate
Insalation : AL, Foil(Hi-Wool) Finish
Body : White epoxy powder coat and
Finish stove enamelled(Munsell No. N-9.3)
Body : White epoxy powder coat and
stove enamelled(Munsell No. N-9.3) Equipment
INDOOR LIGHT

INDOOR LIGHT
Fluorescent lamp : 18/36W
Equipment Light sources : T26
Fluorescent lamp : 18/36W Lamp base : G13
Light sources : T26 Six cable inlet holes
Lamp base : G13 (diameter : Max.16mm)
Six cable inlet holes
(diameter : Max.16mm) Electrical
AC 100~240V, 50/60Hz are available
Electrical on request
AC 100~240V, 50/60Hz are available Ballast : Glow, Electronic
on request

Non-Watertight Fluorescent Ligh

Ballast : Electronic
Non-Watertight Fluorescent Ligh

Technical Drawing Light Distribution Curve [Cd / 1000lm] Technical Drawing Light Distribution Curve [Cd / 1000lm]

120° 120° 120° 120°

30 45

90° 90° 90° 90°

30 45

60° 60 60° 60° 90 60°

90 135

120 180
30° 30° 30° 30°

Specification Option - Emergency DC Lamp - Dimming - Battery back-up

Model No. Capacity L(mm) W(mm) H(mm) Weight(Kg) Remarks

Specification Option - Emergency DC Lamp - Battery back-up FL120NF-GISD 18W X 1 755 315 85 4.90

Model No. Capacity L(mm) W(mm) H(mm) Weight(Kg) Remarks FL220NF-GISD 18W X 2 755 315 85 6.09

FL220NF-EIS-B15N 18W X 2 682 300 81.1 7.9 FL140NF-GISD 18W X 1 1380 315 85 7.15

FL240NF-EIS-B15N 36W X 2 1292 300 81.1 11.9 FL240NF-GISD 18W X 2 1380 315 85 8.20

www.daeyang.co.kr 18 www.daeyang.co.kr 19
 Lighting for Marine Use 2010-2011 Lighting for Marine Use 2010-2011

FL-NFD-B15 Recessed Dampa Ceiling Light (B-15) IP20 FL-NL Decorative Recessed Ceiling Light IP20
Application Application
Accommodation area, saloon, Saloon, dining hall
dining hall, passage ways
Protection degree IP20
Protection degree IP20
Fire class : B-15 Materials
Body & flame : Electro zinc coated
Materials steel sheet
Body : Electro zinc coated steel sheet Diffuser : Louver(Golden & Silver)
Globe flame : Aluminum
Diffuser : Opal polycarbonate Finish
Insalation : AL, Foil(Hi-Wool) Body : White epoxy powder coat and
stove enamelled(Munsell No. N-9.3)
Finish
Body : White epoxy powder coat and Equipment
stove enamelled(Munsell No. N-9.3) Fluorescent lamp :18/36W
INDOOR LIGHT

INDOOR LIGHT
Light sources : T26
Equipment Lamp base : G13
Fluorescent lamp : 18/36W Four cable inlet holes
Light sources : T26 (diameter : Max.16mm)
Lamp base : G13
Six cable inlet holes
(diameter : Max.16mm) Electrical
AC 100~240V, 50/60Hz are available
Electrical on request
AC 100~240V, 50/60Hz are available Ballast : Glow, Electronic
on request

Non-Watertight Fluorescent Ligh

Ballast : Glow, Electronic
Non-Watertight Fluorescent Ligh

Technical Drawing Light Distribution Curve [Cd / 1000lm] Technical Drawing Light Distribution Curve [Cd / 1000lm]

120° 120° 120° 120°

40 30

90° 90° 90° 90°

40 30

80 60° 60 60°
60° 60°

120 90

160 120
30° 30° 30° 30°

Specification Option - Emergency DC Lamp - Dimming - Battery back-up

Model No. Capacity L(mm) W(mm) H(mm) Weight(Kg) Remarks

Specification Option - Emergency DC Lamp - Battery back-up FL120NL-GIS 18W X 1 697 264 100 4.90

Model No. Capacity L(mm) W(mm) H(mm) Weight(Kg) Remarks FL220NL-GIS 18W X 2 697 264 100 6.88

FL220NF-EISD-B15 18W X 2 663 336 85 7.79 FL140NL-GIS 36W X 1 1302 264 100 7.51

FL240NF-EISD-B15 36W X 2 1280 336 85 13.2 FL240NL-GIS 36W X 2 1302 264 100 9.49

www.daeyang.co.kr 20 www.daeyang.co.kr 21
 Lighting for Marine Use 2010-2011 Lighting for Marine Use 2010-2011

FN-NS Corner Light IP20 FB Fluorescent Berth Light IP20

Application Application
Passage way, corner Accommodation area, indoor

Protection degree IP20 Protection degree IP20

Materials Materials
Body : Electro zinc coated steel sheet Body : Aluminium
Diffuser : Opal acryl End caps : ABS
(Acrylonitrile Butadiene Styrene)
Finish Diffuser : Opal polycarbonate
Body : White epoxy powder coat and
stove enamelled(Munsell No. N-9.3) Finish
Body : White epoxy powder coat and
Equipment stove enamelled(Munsell No. N-9.3)
Fluorescent lamp : 18/36W
Light sources : T26 Equipment
INDOOR LIGHT

INDOOR LIGHT
Lamp base : G13 Flourescent lamp : 8/10/15/20W
Cable inlet hole (diameter : 50mm) Lamp holder : G5(8W) & G13
Cable inlet hole (diameter : 30mm)
Electrical ON/OFF switch
AC 100~240V, 50/60Hz are available
on request Electrical
Ballast : Glow, Rapid, Electronic AC 100~240V, 50/60Hz are available
on request
Ballast : Glow

Berth Light
Non-Watertight Fluorescent Ligh

Technical Drawing Light Distribution Curve [Cd / 1000lm] Technical Drawing Light Distribution Curve [Cd / 1000lm]

120° 120° 120° 120°

40 20

90° 90° 90° 90°

40 20

60° 80 60° 60° 40 60°

120 60

160 80
30° 30° 30° 30°

Specification Option -Switch(S), Receptacle(R), Switch&Receptacle(W)

Model No. Capacity L(mm) W(mm) H(mm) D(mm) Weight(Kg) Remarks

Specification Option - Emergency DC Lamp - Dimming - Battery back-up FB108-GJAN 8W 384 70 113 335 1.3

Model No. Capacity L(mm) W(mm) H(mm) Weight(Kg) Remarks FB110-GJAN 10W 428 70 113 385 1.3

FN120NS-GIS 18W X 1 660 167 65 3.75 FB115-GJAN 15W 529 70 113 486 1.8

FN140NS-GIS 36W X 1 1278 167 65 5.23 FB120-GJAN 15W 685 70 113 642 3.0

www.daeyang.co.kr 22 www.daeyang.co.kr 23
 Lighting for Marine Use 2010-2011 Lighting for Marine Use 2010-2011

FB-NS Berth Light IP20 FD Fluorescent Desk Light IP20

Application Application
Accommodation area, indoor Accommodation area, indoor

Protection degree IP20 Protection degree IP20

Materials Materials
Body : Aluminium Body : Aluminium
End caps : Polycarbonate End caps : ABS
Diffuser : Opal acryl (Acrylonitrile Butadiene Styrene)
Diffuser : Opal polycarbonate
Finish
Body : Anti glossy silver Finish
End caps : Black Body : White epoxy powder coat and
stove enamelled(Munsell No. N-9.3)
Equipment End caps : White
Compact flourescent lamp : 9W
INDOOR LIGHT

INDOOR LIGHT
Lapm holder : G23 Equipment
Cable inlet hole : (20 x 30mm) Flourescent lamp : 8/10/15/20W
Lamp holder : G5(8W) & G13
Electrical Cable inlet hole (diameter : 30mm)
AC100~240V, 50/60Hz are available ON/OFF switch
on request Inside screen
Ballast : Rapid
Electrical
AC 100~240V, 50/60Hz are available
on request
Ballast : Glow

Desk Light
Berth Light

Technical Drawing Light Distribution Curve [Cd / 1000lm] Technical Drawing Light Distribution Curve [Cd / 1000lm]

120° 120° 120° 120°

12 20

90° 90° 90° 90°

12 20

60° 24 60° 60° 40 60°

36 60

40 80
30° 30° 30° 30°

Specification Option -Switch(S), Receptacle(R), Switch&Receptacle(W)

Model No. Capacity L(mm) W(mm) H(mm) D(mm) Weight(Kg) Remarks

FD108-GJAN 8W 390 70 113 335 1.3

Specification FD110-GJAN 10W 428 70 113 385 1.3

Model No. Capacity L(mm) W(mm) H(mm) Weight(Kg) Remarks FD115-GJAN 15W 534 70 113 486 1.8

FB109NS-RSAS 9W 240 37 71.5 1 PL lamp FD120-GJAN 15W 690 70 113 642 2.0

www.daeyang.co.kr 24 www.daeyang.co.kr 25
 Lighting for Marine Use 2010-2011 Lighting for Marine Use 2010-2011

FD-NS Fluorescent Desk Light IP20 FM Fluorescent Mirror Light IP44

Application Application
Accommodation area Indoor, toilet, shower room

Protection degree IP20 Protection degree IP44

Materials Materials
Body : ABS Body : Aluminium
(Acrylonitrile Butadiene Styrene) End caps : ABS
(Acrylonitrile Butadiene Styrene)
Finish Silver Diffuser : Opal polycarbonate

Equipment ON/OFF switch Finish

Body : White epoxy powder coat and
Electrical stove enamelled(Munsell No. N-9.3)
AC100~240V, 50/60Hz are available End caps : White
on request
INDOOR LIGHT

INDOOR LIGHT
Equipment
Flourescent lamp : 8/10/15/20W
Lamp holder : G5(8W) & G13
Two cable glands : PG16
With Receptacle

Electrical
AC 100~240V, 50/60Hz are available
on request
Ballast : Glow
Desk Light

Mirror Light
Technical Drawing Technical Drawing Light Distribution Curve [Cd / 1000lm]

120° 120°
20

90° 90°

20

60° 40 60°

60

80
30° 30°

Specification Option -Switch(S), Receptacle(R), Switch&Receptacle(W)

Model No. Capacity L(mm) W(mm) H(mm) D(mm) Weight(Kg) Remarks

FM108-GJAN 8W 390 105 113 250 1.3

Specification FM110-GJAN 10W 435 105 113 250 1.4

Model No. Capacity L(mm) W(mm) H(mm) Weight(Kg) Remarks FM115-GJAN 15W 534 105 113 250 1.8

FD118NS-206RDPWS 18W 348 162 512 4.0 PL lamp FM120-GJAN 15W 690 105 113 250 2.2

www.daeyang.co.kr 26 www.daeyang.co.kr 27
 Lighting for Marine Use 2010-2011 Lighting for Marine Use 2010-2011

ID-U Incandescent Dome Light IP56 HC Halogen Chart Table Light IP20
Application Application
Work shop, refrigeration chamber Wheel house

Protection degree IP56 Protection degree IP20

Materials Materials
Body : Stainless steel, deep drawn Body : Nylon(PA66)
Diffuser : Clear glass Cover : ABS
(Acrylonitrile Butadiene Styrene )
Finish
Body : White epoxy powder coat and Finish
stove enamelled(Munsell No. N-9.3) Body : Black

Equipment Equipment
Incandescent lamp : 40/60/100W Halogen lamp : 20W
Lamp holder : FE26/27 Lamp holder : GZ4
INDOOR LIGHT

INDOOR LIGHT
Two cable glands M24 Available dimmer switch
(Diameter : Max.17mm)
Electrical
Electrical DC24V 20W
AC100~240V, 50/60Hz are available [L] Dimension option spec
on request Standard : 500mm
Type1 : 1000mm
Watertight Incandescent Light

Non-Watertight Incandescent Light

Technical Drawing Light Distribution Curve [Cd / 1000lm] Technical Drawing

120° 120°
30

90° 90°

30

60° 60 60°

90

120
30° 30°

Specification
Model No. Capacity L(mm) W(mm) H(mm) Weight(Kg) Remarks
ID40-UWC 40W 240 240 115 3.1 Specification Option specification ( [L] dimension) - Standard : 500mm - Type1 : 1000mm
ID60-UWC 60W 240 240 115 3.1 Model No. Capacity L(mm) W(mm) H(mm) Weight(Kg) Remarks
ID00-UWC 100W 240 240 115 3.1 HC 20W 500 - - 0.8 DC24V

www.daeyang.co.kr 28 www.daeyang.co.kr 29
 Lighting for Marine Use 2010-2011 Lighting for Marine Use 2010-2011

IC Incandescent Chart Table Light IP20 IR-AC Incandescent Recessed Round Light IP20
Application Application
Wheel house Accommodation area, lounge, dining hall

Protection degree IP20 Protection degree IP20

Materials Materials
Arm : Steel pipe Body : Steel sheet, deep drawn
Reflector : Steel sheet Diffuser : Textured flat glass
Terminal box : Cast aluminium
Finish
Finish Body : White epoxy powder coat and
Body : White epoxy powder coat and stove enamelled(Munsell No. N-9.3)
stove enamelled(Munsell No. N-9.3)
Equipment
Equipment Incandescent lamp : 40/60W
Incandescent lamp : 40/60W Lamp holder : FE26/27
INDOOR LIGHT

INDOOR LIGHT
Lamp holder : TE 26/27 Four cable inlet holes
Dimming control (diameter : 16mm)

Electrical Electrical
AC100~240V, 50/60Hz are available AC100~240V, 50/60Hz are available
on request on request
Non-Watertight Incandescent Light

Non-Watertight Incandescent Light

Technical Drawing Technical Drawing Light Distribution Curve [Cd / 1000lm]

120° 120°
30

90° 90°

30

60° 60 60°

90

120
30° 30°

Specification Specification
Model No. Capacity L(mm) W(mm) H(mm) Weight(Kg) Remarks Model No. Capacity L(mm) W(mm) H(mm) Weight(Kg) Remarks
IC40-IS 40W 180 160 484 1.80 Stand IR40-W1 40W 310 310 92 1.4 -
IC60-IS 60W 180 160 484 1.80 Stand IR60-W1 60W 310 310 92 1.4 -
IC40-IW 40W 180 160 484 1.80 Wall IR40-W2 40W 310 310 92 1.6 2 lamps
IC60-IW 60W 180 160 484 1.80 Wall IR60-W2 60W 310 310 92 1.6 2 lamps

www.daeyang.co.kr 30 www.daeyang.co.kr 31
 Lighting for Marine Use 2010-2011 Lighting for Marine Use 2010-2011

IR-DC Incandescent Recessed Round Light IP20 MIS Incandescent Spot Light IP20
Application Application
Wheel house radio & chart area Accommodation area, recreation room

Protection degree IP20 Protection degree IP20

Ceiling mounting
Materials
Body : Steel sheet, deep drawn Materials
Diffuser : Opal Acryl Body & Reflector : Steel

Finish Finish
Body : White epoxy powder coat and White epoxy power coat and stove
stove enamelled(Munsell No. N-9.3) enamelled(Munsell No. N-9.3)

Equipment Equipment
Incandescent lamp : 20W Incandescent lamp : 40W
Lamp holder : FB15 Halogen Lamp : 50W
INDOOR LIGHT

INDOOR LIGHT
Lamp holder : TE26/27, GX5.3
Electrical DC24V
Electrical
AC 100~240V, 50/60Hz are available
on request
Non-Watertight Incandescent Light

Non-Watertight Incandescent Light

Technical Drawing Light Distribution Curve [Cd / 1000lm] Technical Drawing

120° 120°
15

90° 90°

15

60° 30 60°

45

60
30° 30°

Specification
Specification Model No. Capacity L(mm) W(mm) H(mm) Weight(Kg) Remarks
Model No. Capacity L(mm) W(mm) H(mm) Weight(Kg) Remarks MIS 40W 122 130 169 0.6

IR20-W 20W 154 154 65 0.32 DC24V MHS 50W 122 130 169 0.6

www.daeyang.co.kr 32 www.daeyang.co.kr 33
 Lighting for Marine Use 2010-2011 Lighting for Marine Use 2010-2011

IT-D Incandescent Folding Table Light IP20 IO-01 Incandescent Down Light IP20
Application Application
Wheel house, accommodation cabin Accommodation area, lounge,
dining hall
Protection degree IP20
Available dimming control with adjust- Protection degree IP20
able reflector
Materials
Materials Body : Steel sheet, deep drawn
Body & Reflector : Electro zinc coated Frame : Electro zinc coated steel sheet
steel sheet deep drawn

Finish Finish
White epoxy powder coat and stove White epoxy power coat and stove
enamelled(Munsell No. N-9.3) enamelled(Munsell No. N-9.3)
Frame : Silver & golden color coated
Equipment
INDOOR LIGHT

INDOOR LIGHT
ncandescent lamp : 20/40W Equipment
Lamp holder : TE 26/27 Fluorescent lamp 15W(compact)
Incandescent lamp : 40/60W
Electrical Frame Color -Silver, Gold Lamp holder : FE26/27
AC100~240V, 50/60Hz are available With Screen
on request
DC24V Electrical
AC 100~240V, 50/60Hz are available
on request
Non-Watertight Incandescent Light

Non-Watertight Incandescent Light

Technical Drawing Technical Drawing Light Distribution Curve [Cd / 1000lm]

120° 120°
25

90° 90°

25

60° 50 60°

75

100
30° 30°

Specification
Model No. Capacity L(mm) W(mm) H(mm) Weight(Kg) Remarks
IO40-20W 40W 145 145 165 0.4 Clear lamp
Specification Option -Dimming
IO60-20W 60W 145 145 165 0.4 Clear lamp
Model No. Capacity L(mm) W(mm) H(mm) Weight(Kg) Remarks
IO40-20WR 40W 145 145 165 0.4 Red lamp
IT20-20W 20W 284 57 145 1.0 -
IO60-20WR 60W 145 145 165 0.4 Red lamp
IT40-20W 40W 284 57 145 1.0 - FO15-20W 15W 145 145 165 0.4 PL lamp(15W)
IT20-24W 20W 284 57 145 1.0 DC24V IO60-20W-B15 60W 145 145 165 0.4 Clear lamp
IT40-24W 40W 284 57 145 1.0 DC24V IO60-20W-DB15 60W 145 145 165 0.4 Clear lamp

www.daeyang.co.kr 34 www.daeyang.co.kr 35
 Lighting for Marine Use 2010-2011 Lighting for Marine Use 2010-2011

FO-NF
Fluorescent Down Light IP20 FC-NS Fluorescent Ceiling Light IP20
Application Application
Accommodation area, lounge, Accommodation area, lounge,
dining hall dining hall

Protection degree IP20 Protection degree IP20

Materials Materials
Body : Electro zinc coated steel sheet Body : Brass plate
Reflector : Aluminium Diffuser : Opal acryl
Frame : Electro zinc coated steel sheet
deep drawn Finish
Body : Anti glossy silver, golden
Finish color coated
Body : White epoxy powder coat and
stove enamelled(Munsell No. N-9.3) Equipment
Frame : Silver & golden color coated Fluorescent lamp: 18W(compact)
INDOOR LIGHT

INDOOR LIGHT
Lamp holder : G24d-2
Equipment
Fluorescent lamp : 18W(compact) Electrical
Lamp holder : G24d-2 AC100~240V, 50/60Hz are available
on request
Electrical Ballast : Rapid
AC100~240V, 50/60Hz are available
on request
Ballast : Rapid
Decoration Light

Decoration Light
Technical Drawing Light Distribution Curve [Cd / 1000lm] Technical Drawing

120° 120°
50

90° 90°

50

60° 100 60°

150

200
30° 30°

Specification
Model No. Capacity L(mm) W(mm) H(mm) Weight(Kg) Remarks Specification
FO118NF 18W 290 171 83 1 Model No. Capacity L(mm) W(mm) H(mm) Weight(Kg) Remarks
FO118NF-F 18W 428 208 111 1.2 FC218NS-GSA 18W X 2 360 360 80 2.25

www.daeyang.co.kr 36 www.daeyang.co.kr 37
 Lighting for Marine Use 2010-2011 Lighting for Marine Use 2010-2011

ID-01 Wall Light IP20 ID-02 Wall Light IP20

Application Application
Accommodation area, lounge, Accommodation area, lounge,
dining hall dining hall

Protection degree IP20 Protection degree IP20

Materials Materials
Body : Steel sheet Body : Steel sheet
Front glass : Glass Shade : Linen

Finish Finish
Body : Golden color coated Body : Golden color coated
Shade : White
Equipment
Incandescent lamp : 40/60W Equipment
Lamp holder : TE26/27 Incandescent lamp : 40/60W
INDOOR LIGHT

INDOOR LIGHT
Lamp holder : TE26/27
Electrical
AC100~240V, 50/60Hz are available Electrical
on request AC100~240V, 50/60Hz are available
on request
Decoration Light

Decoration Light
Technical Drawing Technical Drawing

Specification Specification
Model No. Capacity L(mm) W(mm) H(mm) Weight(Kg) Remarks Model No. Capacity L(mm) W(mm) H(mm) Weight(Kg) Remarks
ID40-20GD 40W X 2 235 139 240 2.1 ID40-20GC 40W 202 210 292 1.8

ID60-20GD 60W X 2 235 139 240 2.1 ID60-20GC 60W 202 210 292 1.8

www.daeyang.co.kr 38 www.daeyang.co.kr 39
 Lighting for Marine Use 2010-2011 Lighting for Marine Use 2010-2011

IT-S Stand Light IP20 FW-AN Wall Light IP20

Application Application
Accommodation area, lounge, Accommodation area, lounge,
dining hall dining hall

Protection degree IP20 Protection degree IP20

Materials Materials
Body : Steel sheet Cover : Stainless steel sheet
Shade : Linen Body : Steel
Diffuser : Acryl, Polycar bonate
Finish
Body : Golden color coated Finish
Shade : White Cover : Natural
Body : White epoxy powder coat and
Equipment stove enamelled(Munsell No. N-9.3)
Incandescent lamp : 40/60W
INDOOR LIGHT

INDOOR LIGHT
Lamp holder : E26/27 Equipment
Fluorescent lamp : 9W
Electrical Lamp holder : G23
AC100~240V, 50/60Hz are available Terminal block : Wago 3P
on request
Electrical
AC 100~250V, 50/60Hz are available
on request
Ballast : Rapid
Decoration Light

Decoration Light
Technical Drawing Technical Drawing

Specification
Model No. Capacity L(mm) W(mm) H(mm) Weight(Kg) Remarks Specification Option - Switch

IT40-20GF 40W 355 355 640 2.5 Model No. Capacity L(mm) W(mm) H(mm) Weight(Kg) Remarks
IT60-20GF 60W 355 355 640 2.5 FW209NS-AN 9W X 2 260 220 77.5 1.7 PL lamp

www.daeyang.co.kr 40 www.daeyang.co.kr 41
 Lighting for Marine Use 2010-2011 Lighting for Marine Use 2010-2011

FW-SA Wall Light IP20 PD-WAR Wall Light IP20

Application Application
Accommodation area, lounge, Accommodation area, lounge,
dining hall dining hall

Protection degree IP20 Protection degree IP20

Materials Materials
Body : Brass Body : Brass
Diffuser : Opal acryl Diffuser : Opal acryl

Finish Finish
Body : Golden & Silver color coated Body : Golden & Silver color coated

Equipment Equipment
Fluorescent lamp : 18W(compact) Fluorescent lamp : 15W(compact)
Lamp holder : GX24 Incandescent lamp : 60W
INDOOR LIGHT

INDOOR LIGHT
Lamp holder : TE26/27
Electrical
AC100~240V, 50/60Hz are available Electrical
on request AC 100~250V, 50/60Hz are available
Ballast : Rapid on request
Decoration Light

Decoration Light
Technical Drawing Technical Drawing

Specification
Specification Model No. Capacity L(mm) W(mm) H(mm) Weight(Kg) Remarks
Model No. Capacity L(mm) W(mm) H(mm) Weight(Kg) Remarks PD15-20WAR 15W 200 145 300 1.7 PL lamp

FW118PS-SA 18W 197 94 380 1.8 PL lamp ID60-20WAR 60W 200 145 300 1.7 Incan lamp

www.daeyang.co.kr 42 www.daeyang.co.kr 43
 Lighting for Marine Use 2010-2011 Lighting for Marine Use 2010-2011

PD-WAT Wall Light IP20 PD-WAH Wall Light IP20

Application Application
Accommodation area, lounge, Accommodation area, lounge,
dining hall dining hall

Protection degree IP20 Protection degree IP20

Materials Materials
Body : Steel sheet Body : Steel sheet
Diffuser : Opal acrylic
Finish
Body : Golden & Silver color coated Finish
Body : White epoxy powder coat and
Equipment stove enamelled(Munsell No. N-9.3)
Fluorescent lamp : 15W(compact)
Incandescent lamp : 60W Equipment
Lamp holder : TE26/27 Fluorescent lamp : 12W(compact)
INDOOR LIGHT

INDOOR LIGHT
Incandescent lamp : 60W
Electrical Lamp base : E26/27
AC100~240V, 50/60Hz are available
on request Electrical
AC 100~250V, 50/60Hz are available
on request
Decoration Light

Decoration Light
Technical Drawing Technical Drawing

Specification Specification
Model No. Capacity L(mm) W(mm) H(mm) Weight(Kg) Remarks Model No. Capacity L(mm) W(mm) H(mm) Weight(Kg) Remarks
PD15-20WAT 15W 309 118 260 1.6 PL lamp PD12-20WAH 15W 323 154 162 1.5 PL lamp

ID60-20WAT 60W 309 118 260 1.6 Incan lamp ID60-20WAH 60W 323 154 162 1.5 Incan lamp

www.daeyang.co.kr 44 www.daeyang.co.kr 45
 Lighting for Marine Use 2010-2011 Lighting for Marine Use 2010-2011

EXIT-NF
Exit Light IP20 EXIT-NS
Exit Light IP44
Application Application
Escape routes, directory signage Escape routes, directory signage

Protection degree IP20 Protection degree IP44

Materials Materials
Body & Cover : Electro zine coated Body : Aluminium
steel sheet Sign board : Acrylic plates
Sign board : Acrylic plates
Finish
Finish Body : White epoxy powder coat and
Body : White epoxy powder coat and stove enamelled(Munsell No. N-9.3)
stove enamelled(Munsell No. N-9.3)
Equipment
Equipment Fluorescent Lamp : 8W
Fluorescent Lamp : 7W (compact) Lamp holder : G5
INDOOR LIGHT

INDOOR LIGHT
Lamp holder : G23 Two cable inlet holes
Two cable inlet holes (Diameter : 11mm)
(Diameter : 11mm)
Electrical
Electrical AC100~240V, 50/60Hz are available
AC100~240V, 50/60Hz are available on request
on request Battery back-up type
Ballast : Rapid Ni-Cd battery set for 3 hours emer-
gency operation
Ballast : Glow
Exit Light

Exit Light
Signal Graphic Board Technical Drawing Signal Graphic Board Technical Drawing

Specification Option - Battery back-up * PL lamp : Compact fluorescent lamp Specification Option - Battery back-up

Model No. Capacity L(mm) W(mm) H(mm) Weight(Kg) Remarks Model No. Capacity L(mm) W(mm) H(mm) Weight(Kg) Remarks
EXIT107NF 7W 250 103 158 2 EXIT108NS 8W 428 78 193 3.4

www.daeyang.co.kr 46 www.daeyang.co.kr 47
 Product List

Watertight Fluorescent Light

FL-WS-U 52 FL-WS-PC 53

Surface Ceiling Light Surface Ceiling Light

Watertight Incandescent Light

IP-P/IP-B 54 IB-P/IB-B 55

Incandescent Pendant Light Incandescent Bracket Light

OUTDOOR LIGHT
IK-P/IK-B 56 IPH 57

Incandescent Flourescent Pendant Light

Bulkhead Light

FP 58 IP-24B 59

Flourescent Pendant Light Incandescent Pendant Light

Product List
IB-24B 60 IK-24B 61

Incandescent Incandescent Bulkhead Light

Bracket Light

IH 62
Incandescent Portable
Hand Light

Flood Light
FL-213 63 PF-20H 64

Flourescent Flood Light Halogen Flood Light

PF-H 65 PF-1KH 66

Halogen Flood Light Halogen Flood Light

PF-40SI 67 PF-SB 68

High pressure sodium / High pressure sodium

Metal halide flood light flood light

OUTDOOR LIGHT
www.daeyang.co.kr 49
 Product List

Flood Light
PF-42SI 69 PF-I 70

High pressure Incandescent Flood Light

sodium flood light

PF-M 71 PF-I-P 72

Mercury Flood Light Portable Incandescent

Flood Light

PP-I 73 PF-20I 74
OUTDOOR LIGHT

OUTDOOR LIGHT
Incandescent Incandescent Flood Light

Projection Light

PB-I 75 BL-S/M 76

Sealed Beam Boat Watertight Ballast Box

Deck Light

Search Light

Product List
PS-K 77 PS-K-R 78

Search Light Room control type

Search Light

PS-K-E 79 PC-K 80

Electric Remote Control Type Suez Canal Search Light

Search Light

PX-K 81
Xenon Search Light

OUTDOOR LIGHT
 Lighting for marine use 2010-2011 Lighting for marine use 2010-2011

FL-WS-U Surface Ceiling Light IP67 FL-WS-PC Surface Ceiling Light IP67
Application Application
Engine room, hold, laundry, store Decks, Chemical processing and
weather deck, outside passage way industrial areas

Protection degree IP67 Protection degree IP67

Materials Materials
Body : Stainless steel sheet deep drawn Body : Polycarbonate
Diffuser : Clear polycarbonate Reflector : Electro zinc coated steel sheet
Latch : Stainless steel Diffuser : Clear polycarbonate

Finish Finish
Body : White epoxy powder coat and Body : White epoxy powder coat and
stove enamelled(Munsell No. N-9.3) stove enamelled(Munsell No. N-9.3)
OUTDOOR LIGHT

OUTDOOR LIGHT
Equipment Equipment
Lamp base : G13 Lamp base : G13
Light sources : T26 Two cable glands M24
Fluorescent lamp : 18/36W (Diameter : Max.17mm cable)
(2~4)cable glands M24
(Diameter : Max.17mm cable) Electrical
AC100~240V, 50/60Hz are available
Electrical on request
AC100~240V, 50/60Hz are available Ballast : Electronic
on request
Ballast : Glow, Electronic

Watertight Fluorescent Light

Watertight Fluorescent Light

Technical Drawing Light Distribution Curve [Cd / 1000lm] Technical Drawing Light Distribution Curve [Cd / 1000lm]

120° 120° 120° 120°

35 30

90° 90° 90° 90°

35 30

60° 70 60° 60° 60 60°

105 90

140 120
30° 30° 30° 30°

Specification Option - Emergency DC Lamp - Battery back-up

Model No. Capacity L(mm) W(mm) H(mm) Weight(Kg) Remarks

FL120WS-GIUWNM 18W X 1 706 220 135 3.75 Specification
FL220WS-GIUWNM 18W X 2 706 220 135 5.18 Model No. Capacity L(mm) W(mm) H(mm) Weight(Kg) Remarks
FL140WS-GIUWNM 36W X 1 1312 220 135 6.6 FL120WS-EIPC 18W 1020 95 140 1.6
FL240WS-GIUWNM 36W X 2 1312 220 135 7.70 FL140WS-EIPC 36W 1663 95 140 3.7

www.daeyang.co.kr 52 www.daeyang.co.kr 53
 Lighting for marine use 2010-2011 Lighting for marine use 2010-2011

IP-P/IP-B Incandescent Pendant Light IP56 IB-P/IB-B Incandescent Bracket Light IP56
Application Application
Engine room, work shop, toilet Engine room, work shop
Chemical processing and industrial area Chemical processing and industrial area

Protection degree IP56 Protection degree IP56

Materials Materials
Body : PBT(Poly Butylene Terephtha- Body : PBT(Poly Butylene Terephthalate)
late) / brass / brass
Guard : Clear polycarbonate / cast brass Guard : Clear polycarbonate / cast brass
Globe : Clear glass Globe : Clear glass
Stainless steel screen can be installed Stainless steel screen can be installed
additionally additionally
OUTDOOR LIGHT

OUTDOOR LIGHT
Finish Finish
Body : Light green color (Munsell No. Body : Light green color (Munsell No.
7.5BG 7/2) / Brass (natural) 7.5BG 7/2)/ Brass (natural)

Equipment Equipment
Incandescent lamp : 40/60/100W Incandescent lamp : 40/60/100W
Lamp base : TE26/27 Lamp base : TE26/27
Two cable glands 20a~c Two cable glands 20a~c
(Diameter : Max. 16mm cable) (Diameter : Max. 16mm cable)

Electrical Electrical
AC 100~240V, 50/60Hz are available AC100~240V, 50/60Hz are available
on request on request

Watertight Incandescent Light

Watertight Incandescent Light

Technical Drawing Light Distribution Curve [Cd / 1000lm] Technical Drawing Light Distribution Curve [Cd / 1000lm]

120° 120° 120° 120°

20 25

90° 90° 90° 90°

20 25

60° 40 60° 60° 50 60°

60 75

80 100
30° 30° 30° 30°

Specification Specification
Model No. Capacity L(mm) W(mm) H(mm) Weight(Kg) Remarks Model No. Capacity L(mm) W(mm) H(mm) Weight(Kg) Remarks
IP60-PSCG 60W 140 116 244.5 1.46 - IB60-PSCG 60W 142 116 259.5 1.14 -

IP60-PSCS 60W 140 130 246 1.8 W/Screen IB60-PSCS 60W 142 119 260 1.54 W/Screen

IP60-BNCG 60W 140 107 209 2.04 - IB60-BNCG 60W 158 116 245 2.15 -

IP60-BNCS 60W 140 130 246 2.2 W/Screen IB60-BNCS 60W 158 119 245 2.55 W/Screen

www.daeyang.co.kr 54 www.daeyang.co.kr 55
 Lighting for marine use 2010-2011 Lighting for marine use 2010-2011

IK-P/IK-B Incandescent Bulkhead Light IP56 IPH Flourescent Pendant Light IP56
Application Application
Weather deck, outside passage way Engine room, work shop, toilet
Chemical processing and industrial area Chemical processing and industrial area

Protection degree IP56 Protection degree IP56

Materials Materials
Body : PBT(Poly Butylene Terephthalate) Body : PBT(Poly Butylene Terephthalate)
/ brass / brass
Guard : Clear polycarbonate / cast brass Guard : Clear polycarbonate / cast brass
Globe : Clear glass Globe : Clear glass
Stainless steel screen can be installed Stainless steel screen can be installed
additionally additionally
OUTDOOR LIGHT

OUTDOOR LIGHT
Finish Finish
Body : Light green color (Munsell No. Body : Light green color (Munsell No.
7.5BG 7/2)/ Brass (natural) 7.5BG 7/2)/ Brass (natural)

Equipment Equipment
Incandescent lamp : 40/60/100W Incandescent lamp : 40/60/100W
Lamp base : TE26/27 Lamp base : TE26/27
Two cable glands M24
Electrical (Diameter : Max. 17mm cable)
AC 100~240V, 50/60Hz are available
on request Electrical
AC100~240V, 50/60Hz are available
on request

Watertight Incandescent Light

Watertight Incandescent Light

Technical Drawing Light Distribution Curve [Cd / 1000lm] Technical Drawing Light Distribution Curve [Cd / 1000lm]

120° 120° 120° 120°

15 20

90° 90° 90° 90°

15 20

60° 30 60° 60° 40 60°

45 60

60 80
30° 30° 30° 30°

Specification
Model No. Capacity L(mm) W(mm) H(mm) Weight(Kg) Remarks
IK60-PS 60W 142 116 274.5 1.14 -

IK60-PSS 60W 142 119 284.5 1.44 W/Screen Specification

IK60-BN 60W 155 116 245 2.15 - Model No. Capacity L(mm) W(mm) H(mm) Weight(Kg) Remarks
IK60-BNS 60W 155 119 248.5 2.55 W/Screen IPH60-PSCG 60W 157 157 271.5 W/Screen

www.daeyang.co.kr 56 www.daeyang.co.kr 57
 Lighting for marine use 2010-2011 Lighting for marine use 2010-2011

FP Flourescent Pendant Light IP67 IP-24B Incandescent Pendant Light IP56

Application Application
Engine room, work shop, toilet Engine room, work shop, outside
Chemical processing and industrial area passage ways, Chemical processing
and industrial area
Protection degree IP67
Protection degree IP56
Materials
Body : PC (Polycabonate) Materials
Globe : PC (Polycabonate) Body : Brass
Guard : Brass
Finish Globe : Clear glass
Body : Black
Globe : Clear (Stripe) Finish
Body : Natural
OUTDOOR LIGHT

OUTDOOR LIGHT
Equipment
Lamp base : GX24 Equipment
Flourescent lamp : 13W (compact) Incandescent lamp : 5/10/20W
Two cable glands : M24 Lamp base : B15
(Diameter : Max. 17mm cable) Two cable glands M24
(Diameter : Max. 17mm cable)
Electrical
AC 100~240V, 50/60Hz are available Electrical DC24V
on request
Ballast : Rapid

Watertight Incandescent Light

Watertight Incandescent Light

Technical Drawing Light Distribution Curve [Cd / 1000lm] Technical Drawing

120° 120°
15

90° 90°

15

60° 30 60°

45

60
30° 30°

Specification
Model No. Capacity L(mm) W(mm) H(mm) Weight(Kg) Remarks Specification
FP13-206PBC 13W 157 157 271.5 Model No. Capacity L(mm) W(mm) H(mm) Weight(Kg) Remarks
FP13-206PBCS 13W 157 157 271.5 W/Screen IP-24BNEG DC24 134 92.5 141 1.6

www.daeyang.co.kr 58 www.daeyang.co.kr 59
 Lighting for marine use 2010-2011 Lighting for marine use 2010-2011

IB-24B Incandescent Bracket Light IP56 IK-24B Incandescent Bulkhead Light IP56
Application Application
Engine room, work shop, Engine room, work shop, outside
outside passage ways, Chemical passage ways, Chemical processing
processing and industrial area and industrial area

Protection degree IP56 Protection degree IP56

Materials Materials
Body : Brass Body : Brass
Guard : Brass Guard : Brass
Globe : Clear glas Globe : Clear glass

Finish Finish
Body : Natural Body : Natural
OUTDOOR LIGHT

OUTDOOR LIGHT
Equipment Equipment
Incandescent lamp : 5/10/20W Incandescent lamp : 5/10/20W
Lamp base : B15 Lamp base : B15
Two cable glands 20a~c
(Diameter : Max. 16mm cable) Electrical DC24V

Electrical DC24V

Watertight Incandescent Light

Watertight Incandescent Light

Technical Drawing Technical Drawing

Specification Specification
Model No. Capacity L(mm) W(mm) H(mm) Weight(Kg) Remarks Model No. Capacity L(mm) W(mm) H(mm) Weight(Kg) Remarks
IB-24BNEG DC24 146 95 146 1.9 IK05-24BNEG DC24 146 95 146 1.8

www.daeyang.co.kr 60 www.daeyang.co.kr 61
 Lighting for marine use 2010-2011 Lighting for marine use 2010-2011

IH Incandescent Portable Hand Light IP56 FL-213 Flourescent Flood Light IP67
Application Application
Accommodation area, engine room, Deck and hold, Chemical processing
work shop and industrial area

Protection degree IP56 Protection degree IP67

Materials Materials
Body & Guard : Polycarbonate Body : Stainless steel sheet deep drawn
Globe : Clear glass Front glass : Heat and impact resistant glass
Reflector : Steel sheet
Finish Latch : Stainless steel
Body : White
Finish
Equipment Body : White epoxy powder coat and
OUTDOOR LIGHT

OUTDOOR LIGHT
Incandescent lamp : 40/60W stove enamelled(Munsell No. N-9.3)
Lamp holder : TE26/27
Cable : TPNP 1.5 S/Q 15m cord & plug Equipment
Flourescent lamp : 13W(PL Lamp)
Electrical Lamp base : GX24
AC100~240V, DC24V, 50/60Hz are Two cable glands M24
available on request (Diameter : Max.17mm cable)
Vertical adjust (Up: 40°, Down: 80°)

Electrical
AC 100~240V, 50/60Hz are available
on request
Ballast : Rapid

Flood Light
Watertight Incandescent Light

Technical Drawing Light Distribution Curve [Cd / 1000lm] Technical Drawing Light Distribution Curve [Cd / 1000lm]

120° 120° 120° 120°

20 60

90° 90° 90° 90°

20 60

60° 40 60° 60° 120 60°

60 180

80 240
30° 30° 30° 30°

Specification
Model No. Capacity L(mm) W(mm) H(mm) Weight(Kg) Remarks
IH60-10PN 60W 116 116 330 3.1 110V Specification Option -Guard

IH60-20PN 60W 116 116 330 3.1 220V Model No. Capacity L(mm) W(mm) H(mm) Weight(Kg) Remarks
IH60-24PN 60W 116 116 330 3.1 DC 24V FL213WS-206UWCF 13W X 2 328 145 275 5.3 PL Lamp

www.daeyang.co.kr 62 www.daeyang.co.kr 63
 Lighting for marine use 2010-2011 Lighting for marine use 2010-2011

PF-20H Halogen Flood Light IP67 PF-H Halogen Flood Light IP67
Application Application
Deck and hold, Chemical processing Deck and hold, Chemical processing
and industrial area and industrial area

Protection degree IP67 Protection degree IP67

Materials Materials
Body : Stainless steel sheet deep drawn Body : Stainless steel sheet deep drawn
Front glass : Heat and impact resistant glass Front glass : Heat and impact resistant glass
Reflector : High reflectance aluminium Reflector : High reflectance aluminium
Latch : Stainless steel Latch : Stainless steel

Finish Finish
Body : White epoxy powder coat and Body : White epoxy powder coat and
OUTDOOR LIGHT

OUTDOOR LIGHT
stove enamelled(Munsell No. N-9.3) stove enamelled(Munsell No. N-9.3)

Equipment Equipment
Vertical adjust (Up: 40°, Down: 80°) Halogen lamp : 300/500W
Halogen lamp : 200W Lamp base : R7S
Lamp base : R7S Two cable glands M24
Two cable glands M24 (Diameter : Max.17mm cable)
(Diameter : Max.17mm cable) Vertical adjust (Up: 40°, Down: 80°)
Halogen lamp
Electrical
AC 100~240V, 50/60Hz are available Electrical
on request AC 100~240V, 50/60Hz are available
on request

Flood Light
Flood Light

Technical Drawing Light Distribution Curve [Cd / 1000lm] Technical Drawing Light Distribution Curve [Cd / 1000lm]

120° 120° 120° 120°

60 75

90° 90° 90° 90°

60 75

60° 120 60° 60° 150 60°

180 225

240 300
30° 30° 30° 30°

Specification Option -Narrow, Wide

Specification Option -Guard Model No. Capacity L(mm) W(mm) H(mm) Weight(Kg) Remarks

Model No. Capacity L(mm) W(mm) H(mm) Weight(Kg) Remarks PF30H-20UWCF-N 300W 337 137 360 5.3

PF20H-20UWCF 200W 328 140 280 3.97 PF50H-20UWCF-N 500W 337 137 360 5.3

www.daeyang.co.kr 64 www.daeyang.co.kr 65
 Lighting for marine use 2010-2011 Lighting for marine use 2010-2011

PF-1KH Halogen Flood Light IP67 PF-40SI High pressure sodium / Metal halide flood light IP67
Application Application
Deck and hold, Chemical processing Deck and hold, Chemical processing
and industrial area and industrial area

Protection degree IP67 Protection degree IP67

Materials Materials
Body : Stainless steel sheet deep drawn Body : Stainless steel sheet deep drawn
Front glass : Heat and impact resistant glass Front glass : Heat and impact resistant glass
Reflector : High reflectance aluminium Reflector : High reflectance aluminium
Latch : Stainless steel Latch : Stainless steel

Finish Finish
Body : White epoxy powder coat and Body : White epoxy powder coat and
OUTDOOR LIGHT

OUTDOOR LIGHT
stove enamelled(Munsell No. N-9.3) stove enamelled(Munsell No. N-9.3)

Equipment Equipment
Halogen lamp : 1KW Sodium Lamp : 250/400W
Lamp base : R7S Matal Halide Lamp : 400W
Two cable glands M24 Lamp base : E39/40
(Diameter : Max. 17mm cable) Two cable glands M24
Vertical adjust (Up: 40°, Down: 80°) (Diameter : Max. 17mm cable)
Vertical adjust (Up: 40°, Down: 80°)
Electrical Separate ballast
AC 100~240V, 50/60Hz are available Ignitor : Terminal box included)
on request
Electrical

Flood Light
AC 100~240V, 50/60Hz are available
Flood Light

on request

Technical Drawing Light Distribution Curve [Cd / 1000lm] Technical Drawing Light Distribution Curve [Cd / 1000lm]

120° 120° 120° 120°

60 6000

90° 90° 90° 90°

60 6000

60° 120 60° 60° 12000 60°

180 18000

240 24000
30° 30° 30° 30°

Specification Option -Narrow, Wide

Specification Option -Narrow, Wide Model No. Capacity L(mm) W(mm) H(mm) Weight(Kg) Remarks
Model No. Capacity L(mm) W(mm) H(mm) Weight(Kg) Remarks PF25SI-UWCN 250W 460 175 397 8 Narrow beam
PF1KH-20UWCF 1000W 460 175 397 8.0 PF40SI-UWCN 400W 460 175 397 8 Narrow beam

www.daeyang.co.kr 66 www.daeyang.co.kr 67
 Lighting for marine use 2010-2011 Lighting for marine use 2010-2011

PF-SB High pressure sodium flood light IP67 PF-42SI High pressure sodium flood light IP67
Application Application
Deck and hold, Chemical processing Deck and hold, Chemical processing
and industrial area and industrial area

Protection degree IP67 Protection degree IP67

Materials Materials
Body : Stainless steel sheet deep drawn Body : Stainless steel sheet deep drawn
Front glass : Heat and impact resistant glass Front glass : Heat and impact resistant glass
Reflector : High reflectance aluminium Reflector : High reflectance aluminium
Latch : Stainless steel Latch : Stainless steel

Finish Finish
Body : White epoxy powder coat and Body : White epoxy powder coat and
OUTDOOR LIGHT

OUTDOOR LIGHT
stove enamelled(Munsell No. N-9.3) stove enamelled(Munsell No. N-9.3)

Equipment Equipment
Sodium Lamp : 400W Sodium Lamp : 400W
Lamp base : E39/40 Matal Halide Lamp : 400W
Two cable glands M24 Lamp base : E39/40
(Diameter : Max.17mm cable) Two cable glands M24
Vertical adjust (Up: 40°, Down: 60°) (Diameter : Max.17mm cable)
Built in ballast Vertical adjust (Up: 40°, Down: 60°)
Ignitor : Terminal box included Separate ballast
Ignitor : Terminal box included
Electrical
AC 100~240V, 50/60Hz are available Electrical

Flood Light
on request AC 100~240V, 50/60Hz are available
Flood Light

on request

Technical Drawing Light Distribution Curve [Cd / 1000lm] Technical Drawing Light Distribution Curve [Cd / 1000lm]

120° 120° 120° 120°

130 100

90° 90° 90° 90°

130 100

60° 260 60° 60° 200 60°

390 300

520 400
30° 30° 30° 30°

Specification Option -Narrow, Wide

Specification Option -Narrow, Wide Model No. Capacity L(mm) W(mm) H(mm) Weight(Kg) Remarks

Model No. Capacity L(mm) W(mm) H(mm) Weight(Kg) Remarks PF42SI-UWCW 400W X 2 512 160 630 16 Wide beam

PF40SB-20UWCN 400W 512 160 630 19.0 Narrow beam PF42SI-UWCN 400W X 2 512 160 630 16 Narrow beam

www.daeyang.co.kr 68 www.daeyang.co.kr 69
 Lighting for marine use 2010-2011 Lighting for marine use 2010-2011

PF-I Incandescent Flood Light IP67 PF-M Mercury Flood Light IP67
Application Application
Deck and hold, Chemical processing Deck and cargo hold,
and industrial area Chemical processing and industrial area

Protection degree IP67 Protection degree IP67

Materials Materials
Body : Stainless steel sheet deep drawn Body : Stainless steel sheet deep drawn
Front glass : Heat and impact resistant glass Front glass : Heat and impact resistant glass
Reflector : High reflectance aluminium Reflector : High reflectance aluminium
Latch : Stainless steel Latch : Stainless steel

Finish Finish
Body : White epoxy powder coat and Body : Light green epoxy powder coat
OUTDOOR LIGHT

OUTDOOR LIGHT
stove enamelled(Munsell No. N-9.3) and stove enamelled
(Munsell No. 7.5BG 7/2)
Equipment
Lamp base : E39/40 Equipment
One cable gland 24 Lamp base : E39/40
(Diameter : Max.17mm cable) One cable gland M24
Vertical adjust (Up: 40°, Down: 80°) (Diameter : Max.17mm cable)
Vertical adjust (Up: 40°, Down: 80°)
Electrical Separate ballast
AC 100~240V, 50/60Hz are available
on request Electrical
AC 100~240V, 50/60Hz are available
on request

Flood Light
Flood Light

Technical Drawing Light Distribution Curve [Cd / 1000lm] Technical Drawing Light Distribution Curve [Cd / 1000lm]

120° 120° 120° 120°

3000 2000

90° 90° 90° 90°

3000 2000

60° 6000 60° 60° 4000 60°

9000 6000

12000 8000
30° 30° 30° 30°

Specification
Model No. Capacity L(mm) W(mm) H(mm) Weight(Kg) Remarks Specification
PF30I-20UWCF 300W 428 482 540 9.5 Model No. Capacity L(mm) W(mm) H(mm) Weight(Kg) Remarks

PF50I-20UWCF 500W 428 482 540 9.5 PF40M-USCF 400W 428 482 540 9.5

PF1KI-20UWCF 1000W 568 650 700 16 PF70M-USCF 700W 568 650 700 16

www.daeyang.co.kr 70 www.daeyang.co.kr 71
 Lighting for marine use 2010-2011 Lighting for marine use 2010-2011

PF-I-P Portable Incandescent Flood Light IP67 PP-I Incandescent Projection Light IP56
Application Application
Working area, hold, Chemical processing Deck and hold, Working area, Chemical
and industrial area processing and industrial area

Protection degree IP67 Protection degree IP56

Materials Materials
Body : Stainless steel, deep drawn Body : Stainless steel sheet
Globe frame : Stainless steel Guard : Stainless steel
Front glass : Heat and impact resistant glass
Latch: Stainless steel Finish
Guard : Stainless steel Body : Light green epoxy powder coat
and stove enamelled
Finish (Munsell No. 7.5BG 7/2)
OUTDOOR LIGHT

OUTDOOR LIGHT
Body : Light green epoxy powder coat Incandescent lamp : 300/500W
and stove enamelled
(Munsell No.7.5BG 7/2) Equipment
Lamp base : E39
Equipment One cable gland M24
Lamp base : TE39/40 (Diameter : Max.17mm cable)
Cable : TPNP 1.5 S/Q 30M cable & plug Vertical adjust and horizontal swivel

Electrical Electrical
AC 100~240V, 50/60Hz are available AC 100~240V, 50/60Hz are available
on request on request

Flood Light
Flood Light

Technical Drawing Light Distribution Curve [Cd / 1000lm] Technical Drawing Light Distribution Curve [Cd / 1000lm]

120° 120° 120° 120°

400 100

90° 90° 90° 90°

400 100

60° 800 60° 60° 200 60°

1200 300

1800 400
30° 30° 30° 30°

Specification Specification
Model No. Capacity L(mm) W(mm) H(mm) Weight(Kg) Remarks Model No. Capacity L(mm) W(mm) H(mm) Weight(Kg) Remarks
PF30I-20USCP 300W 428 482 428 15.5 PP30I-20USCF 300W 400 248 294 3.54

PF50I-20USCP 500W 428 482 428 15.5 PP50I-20USCF 500W 400 248 294 3.54

www.daeyang.co.kr 72 www.daeyang.co.kr 73
 Lighting for marine use 2010-2011 Lighting for marine use 2010-2011

PF-20I Incandescent Flood Light IP67 PB-I Sealed Beam Boat Deck Light IP56
Application Application
Deck and hold, Chemical processing Life boat embarkation area, Chemical
and industrial areas processing and industrial area

Protection degree IP67 Protection degree IP56

Materials Materials
Body : Stainless steel, deep drawn Body : Cast brass
Setting base : Cast brass Setting base : Cast brass
Front glass : Heat and impact resistant glass
Latch : Stainless steel Finish
Body : Light green epoxy powder coat
Finish and stove enamelled
Body : Light green epoxy powder coat (Munsell No. 7.5BG 7/2)
OUTDOOR LIGHT

OUTDOOR LIGHT
and stove enamelled
(Munsell No.7.5BG 7/2) Equipment
One cable gland 20a~c
Equipment (Diameter : Max.16mm cable)
Lamp base : E26/27 Vertical adjust and horizontal swivel
One cable gland M24
(Diameter : Max. 17mm cable) Electrical
Vertical adjust and horizontal swivel Lamp for sealed beam : DC 24V, 75W

Electrical
AC 100~240V, 50/60Hz are available
on request

Flood Light
Flood Light

Technical Drawing Light Distribution Curve [Cd / 1000lm] Technical Drawing Light Distribution Curve [Cd / 1000lm]

120° 120° 120° 120°

60 300

90° 90° 90° 90°

60 300

60° 120 60° 60° 600 60°

180 900

240 1200
30° 30° 30° 30°

Specification Specification
Model No. Capacity L(mm) W(mm) H(mm) Weight(Kg) Remarks Model No. Capacity L(mm) W(mm) H(mm) Weight(Kg) Remarks
PF20I-20USCF 200W 275 315 330 4.3 PB75I-24BSCF 75W 163 165 260 5.2 DC24V

www.daeyang.co.kr 74 www.daeyang.co.kr 75
 Lighting for marine use 2010-2011 Lighting for marine use 2010-2011

BL-S/M Watertight Ballast Box IP44 PS-K Search Light IP56

Application Application
Separate ballast box for flood light Bridge wing, Chemical processing and
Chemical processing and industrial area industrial areas

Protection degree IP44 Protection degree IP56

Materials Materials
Body : Zinc coated steel sheet deep Body : Stainless steel
drawn and stainless steel Arm : Stainless steel
Cover : Zinc coated steel sheet deep Front glass : Heat and impact resistant glass
drawn and stainless steel Latch : Stainless steel
Latch : Stainless steel
Finish
Finish Body : White epoxy powder coat and
OUTDOOR LIGHT

OUTDOOR LIGHT
Body : White epoxy powder coat and stove enamelled(Munsell No. N-9.3)
stove enamelled(Munsell No. N-9.3)
Equipment
Equipment Incandescent Lamp : 1/2/3KW
Three cable glands PG21 Lamp holder : TE39
(Diameter : Max.19mm cable) Halogen Lamp : 1/2/3KW
Lamp holder : GX9.5-1KW/G38-2,3KW
Electrical One cable gland M24
AC 100~240V, 50/60Hz are available (Diameter : Max.17mm cable)
on request Incandescent lamp
Horizontal rotation : 360°
Vertical movement : up(30°), down(75°)

Search Light
Electrical
Flood Light

AC 100~240V, 50/60Hz are available

on request

Technical Drawing Technical Drawing

Specification
Model No. Capacity L(mm) W(mm) H(mm) Weight(Kg) Remarks
BL40S-206SWC 400W 262 460 160 10.6 Sodium Specification
BL42S-206SWC 400W X 2 262 460 160 10.8 Sodium Model No. Capacity L(mm) W(mm) H(mm) Weight(Kg) Remarks
BL1KS-206SWC 1000W 262 460 160 10.6 Sodium PS1KI-20UWCF-N 1KW 480 510 695 32

BL40M-206SWC 400W 262 460 160 10.6 Mercury PS2KI-20UWCF 2KW 825 780 1115 90

BL40MH-206SSC 400W 262 460 160 10.6 Matal Halide PS3KI-20UWCF 3KW 825 780 1115 90

www.daeyang.co.kr 76 www.daeyang.co.kr 77
 Lighting for marine use 2010-2011 Lighting for marine use 2010-2011

PS-K-R Room control type IP56 PS-K-E Electric Remote Control Type IP56
Application Application
Bridge wing, Chemical processing and Bridge wing, Chemical processing and
industrial areas industrial areas

Protection degree IP56 Protection degree IP56

Materials Materials
Body : Stainless steel Body : Stainless steel
Arm : Stainless steel Arm : Steel zinc coated
Front glass : Heat and impact resistant glass Front glass : Heat and impact resistant glass
Latch : Stainless steel
Finish
Finish Body : White epoxy powder coat and
Body : White epoxy powder coat and stove enamelled(Munsell No. N-9.3)
OUTDOOR LIGHT

OUTDOOR LIGHT
stove enamelled(Munsell No. N-9.3)
Equipment
Equipment Lamp holder : TE39/40
Incandescent lamp : 1/2/3KW Cable gland M24
Halogen lamp : 1/2/3KW (Diameter : Max. 17mm cable)
Lamp holder : TE39 PS-K-E
Control panel
One cable gland M24 Low base unit with cabin control
(Diameter : Max. 17mm cable) Horizontal rotation : ±165°
Incandescent lamp Vertical movement : up(20°),
Horizontal rotation : 360° down(35°)
Vertical movement : up(30°),
down(30°) Incandescent lamp
Separate control panel with ON/OFF

Search Light
Electrical switch and joystick switch
Search Light

AC 100~240V, 50/60Hz are available

on request Incandescent lamp : 1/2/3KW
Halogen lamp : 1/2/3KW
Technical Drawing Technical Drawing
Electrical
AC 100~240V, 50/60Hz are available
on request

Specification Specification
Model No. Capacity L(mm) W(mm) H(mm) Weight(Kg) Remarks Model No. Capacity L(mm) W(mm) H(mm) Weight(Kg) Remarks
PS1KI-20UWCR-N 1KW 480 510 695 32 Room control PS1KI-20UWCEPJ 1KW 480 510 1160 85 Room control

PS2KI-20UWCR 2KW 825 780 1115 90 Room control PS2KI-20UWCEPJ 2KW 825 780 1700 193.5 Room control

PS3KI-20UWCR 3KW 825 780 1115 90 Room control PS3KI-20UWCEPJ 3KW 825 780 1700 193.5 Room control

www.daeyang.co.kr 78 www.daeyang.co.kr 79
 Lighting for marine use 2010-2011 Lighting for marine use 2010-2011

PC-K Suez Canal Search Light IP56 PX-K Xenon Search Light IP56
Application Application
Suez canal Bridge wing

Protection degree IP56 Protection degree IP56

Fulfillment of all regulations for
the Suez canal Materials
ABS certified Body : Stainless steel
Arm : Stainless steel
Materials Frame : Cast aluminium
Body : Stainless steel Front glass : Heat and impact resistant glass
Arm : Cast aluminium
Frame : Cast aluminium Finish
Front glass : Heat and impact resistant glass Body : White epoxy powder coat and
PX-1K stove enamelled(Munsell No. N-9.3)
OUTDOOR LIGHT

OUTDOOR LIGHT
Finish
Body : White epoxy powder coat and Equipment
stove enamelled(Munsell No. N-9.3) Xenon lamp : 1/2.5/7KW

Equipment Electrical
Lamp holder : G19/54x60 AC 100~240V, 50/60Hz are available
Lamp : Main and spare lamps included on request
Gastight enclosure

Electrical
AC 100~240V, 50/60Hz are available
on request

Search Light
Search Light

PX-2.5K

Technical Drawing Technical Drawing

PX-1K Control panel

PX-2.5K Control panel /

PX-7K Control panel

PX-7K Power

Specification
Specification Model No. Capacity L(mm) W(mm) H(mm) Weight(Kg) Remarks
Model No. Capacity L(mm) W(mm) H(mm) Weight(Kg) Remarks PX1K-206UWE 1KW 420 590 1279 90

PC2KI-20USCF 2KW 750 805 1050 52.8 PX2.5K-206UWE 2.5KW 555 690 1430 170

PC3KI-20USCF 3KW 750 805 1050 52.8 PX7K-206UWE 7KW 840 1045 2056 280

www.daeyang.co.kr 80 www.daeyang.co.kr 81
 Product List

Navigation Light

NAVIGATION LIGHT & SIGNAL LIGHT

A2-S 84 A2-D 85

Single Lens Double Lens

Signal Light
DDS-84 86 IS-P/IS-B 87

Portable Daylight Signal Light

Signalling Light

IM-23/24 88 IW-01 89

Morse Signal Light Warning Light

MK-S 90 MK-FP 91

Morse Key Flush Morse Key

Product List
Light Control Panel
Navigation Panel 92 Signal Panel 93

Light Control Panel Light Control Panel

NAVIGATION LIGHT
& SIGNAL LIGHT
www.daeyang.co.kr 83
 Lighting for marine use 2010-2011 Lighting for marine use 2010-2011

A2-S Single Lens IP56 A2-D Double Lens IP56

Application Application
NAVIGATION LIGHT & SIGNAL LIGHT

NAVIGATION LIGHT & SIGNAL LIGHT

Vessels of 20M and above in length Vessels of 20M and above in length
In compliance with COLREG 1972 In compliance with COLREG 1972

Protection degree IP56 Protection degree IP56

Visibility : Min. 3N.M, mast head Visibility : Min. 3N.M, mast head
6N.M(Nautical mile) 6N.M(Nautical mile)

Materials Materials
Cover & body : Polycarbonate Cover & body : Polycarbonate
Lens : Polycarbonate Lens : Polycarbonate

Finish Finish
Cover & lower body : Mat black Cover & lower body : Mat black
Lens : Colored lens Lens : Colored lens

Equipment Equipment
Incandescent lamp : 40/60/100W Incandescent lamp : 40/60W
Lamp holder : FE26/B22 Lamp holder : FE26/B22
One cable gland 20a~c Two cable glands 20a~c
(Diameter : Max.16mm cable) (Diameter : Max.16mm cable)
LENS COLOR Dangerous cargo & huge vessel LENS COLOR
light - Separate Electrical
P.C.B box AC100~240V, 50/60Hz are available
on request
Electrical
Technical Drawing AC100~240V, 50/60Hz are available

Navigation Light
on request
Navigation Light

Technical Drawing

Specification
Model No. Capacity L(mm) W(mm) H(mm) Weight(Kg) Remarks
A2-SM(Masthead) 60W 226 226 293 2.4 Clear(225°)

A2-SP(Port) 60W 226 226 293 2.4 Red(112.5°)

A2-ST(Starboard) 60W 226 226 293 2.4 Green(112.5°)

Specification
A2-SS(Stern) 40W 226 226 293 2.8 Clear(135°)
Model No. Capacity L(mm) W(mm) H(mm) Weight(Kg) Remarks
A2-SW(Anchor) 40W 226 226 293 2.8 Clear(360°)
A2-DM(Masthead) 60W X 2 226 226 475 4.6 Clear(225°)
A2-SR(N.U.C) 60W 226 226 293 2.8 Red(112.5°)
A2-DP(Port) 60W X 2 226 226 475 4.6 Red(112.5°)
HV-100G20BH
100W 226 226 293 2.8 Green180-200F/min
(Huge vessel light) A2-DT(Starboard) 60W X 2 226 226 475 4.6 Green(112.5°)
DC-100R20AH
100W 226 226 293 2.8 Red120~140F/min A2-DS(Stern) 40W X 2 226 226 475 4.6 Clear(135°)
(Dangerous cargo light)
MV-SW0020H
100W 226 226 293 2.8 Clear A2-DW(Anchor) 40W X 2 226 226 475 4.6 Clear(360°)
(Maneuvering light)

A2-SY(Towing light) 40W 226 226 293 2.4 Yellow(135°) A2-DR(N.U.C) 60W X 2 226 226 475 4.0 Red(360°)

www.daeyang.co.kr 84 www.daeyang.co.kr 85
 Lighting for marine use 2010-2011 Lighting for marine use 2010-2011

DDS-84 Portable Daylight Signalling Light IP56 IS-P/IS-B Signal Light IP56
Application Application
NAVIGATION LIGHT & SIGNAL LIGHT

NAVIGATION LIGHT & SIGNAL LIGHT

In compliance with SOLAS 1974 General warning with different colors
Ship’s turn movement for PANAMA/
Protection degree IP56 SUEZ canal

Materials Protection degree IP56

Body & front frame : Die cast aluminum
Grip & lever : Polycarbonate Materials
Reflector : High polished glass Body : PC(Poly Carbonate)/Cast brass
Globe : Glass
Finish
Body : Mat black Finish
Body : PC(Mat black)/Brass(Natural)
Equipment Globe : Glass(Clear/Red/Green/Blue)
Colored filter fitted on the front pane is
available. (Filter-red, green, amber, blue) Equipment
Softly operating signalling key Incandescent lamp : 40/60W
With sight telescope Lamp holder : E 26/27
Contained portable box One cable gland M24
Halogen lamp (Diameter : Max.17mm cable)

LENS COLOR Electrical LENS COLOR Electrical

DC24V, 60W AC100~240V, 50/60Hz are available
on request

Signal Light
Signal Light

Technical Drawing Technical Drawing

Specification
Model No. Capacity L(mm) W(mm) H(mm) Weight(Kg) Remarks
IS-PBCW 40~60W 140 140 214.5 1.26 Clear

IS-PBCR 40~60W 140 140 214.5 1.26 Red

IS-PBCG 40~60W 140 140 214.5 1.26 Green

IS-PBCB 40~60W 140 140 234.5 1.37 Blue

IS-BNCW 40~60W 140 140 220 2.5 Clear

Specification IS-BNCR 40~60W 140 140 214.5 2.5 Red

Model No. Capacity L(mm) W(mm) H(mm) Weight(Kg) Remarks IS-BNCG 40~60W 140 140 214.5 2.5 Green

DDS-84ABC 24V/60W 170 186 304 2.6 Battery Charge IS-BNCB 20~60W 140 140 222 2.6 Blue

www.daeyang.co.kr 86 www.daeyang.co.kr 87
 Lighting for marine use 2010-2011 Lighting for marine use 2010-2011

IM-23/24 Morse Signal Light IP56 IW-01 Warning Light IP56

Application Application
NAVIGATION LIGHT & SIGNAL LIGHT

NAVIGATION LIGHT & SIGNAL LIGHT

Morse signal Engine room, refrigerated hold

Protection degree IP56 Protection degree IP56

Materials Materials
Body : Cast Brass Body : Cast brass
Globe : Glass Globe : Colored glass
Guard : Cast brass
Finish
Body : Light green epoxy powder coat Finish
and stove enamelled Body : Natural
(Munsell No. 7.5BG 7/2)
Equipment
Equipment Equipment
Incandescent lamp : 15/20W Incandescent lamp : 40/60W
Lamp holder : FE26/27(IM24), Lamp holder : FE26/27
FB15(IM23) Two cable glands 20a~c
One cable gland 20a~c (Diameter : Max.16mm cable)
(Diameter : Max.16mm cable)
Electrical
Electrical LENS COLOR AC 100~240V, 50/60Hz are available
AC 100~240V, 50/60Hz are available on request
on request

Signal Light
Signal Light

Technical Drawing Technical Drawing

Specification
Specification Model No. Capacity L(mm) W(mm) H(mm) Weight(Kg) Remarks
Model No. Capacity L(mm) W(mm) H(mm) Weight(Kg) Remarks IW-20BNCR 60W 116 116 268 124 Red
IM23-20BSC 20W X 3 380 380 267 2.6 FB15 IW-20BNCG 60W 116 116 268 124 Green
IM24-20BSC 20W X 4 380 380 310 5.2 FE26/27 IW-20BNCY 60W 116 116 268 124 Yellow

www.daeyang.co.kr 88 www.daeyang.co.kr 89
 Lighting for marine use 2010-2011 Lighting for marine use 2010-2011

MK-S Morse Key IP56 MK-FP Flush Morse Key IP20

Application Application
NAVIGATION LIGHT & SIGNAL LIGHT

NAVIGATION LIGHT & SIGNAL LIGHT

Outdoor use, bridge wing Wheel house

Protection degree IP56 Protection degree IP20

Materials Materials
Body : Cast brass Body : Electro zinc coated steel sheet

Finish Finish
Body : Natural Body : Light green epoxy powder coat
and stove enamelled
Equipment (Munsell No. 7.5BG 7/2)
One cable gland M24
(Diameter : Max.17mm cable) Equipment
One cable bushing
Electrical (Diameter : Max.16mm cable)
Limit switch : AC250V, 1A
Electrical
Hi-speed hand key : AC250V, 1A

Signal Light
Signal Light

Technical Drawing Technical Drawing

Specification
Model No. Capacity L(mm) W(mm) H(mm) Weight(Kg) Remarks Specification
MK-SPCN 250V/6A 89 123 50.5 1.3 Port Model No. Capacity L(mm) W(mm) H(mm) Weight(Kg) Remarks
MK-STCN 250V/6A 89 123 50.5 1.3 FSTBD MK-FP AC 250V/1A 210 260 132 3.8

www.daeyang.co.kr 90 www.daeyang.co.kr 91
 Lighting for marine use 2010-2011 Lighting for marine use 2010-2011

Navigation Panel Light Control Panel IP20 Signal Panel Light Control Panel IP20
Application Application
NAVIGATION LIGHT & SIGNAL LIGHT

NAVIGATION LIGHT & SIGNAL LIGHT

Wheel house Wheel house

Protection degree IP20 Protection degree IP20

Materials Materials
Body : Aluminium Body : Aluminium
Cover : Aluminium Cover : Aluminium

Finish Finish
Body : Black(Maker standard) Body : Black(Maker standard)

Electrical Electrical
AC220~230V, 50/60Hz are available AC220~230V, 50/60Hz are available
on request on request

Light Control Panel

Light Control Panel

Technical Drawing Technical Drawing

Specification Specification
Model No. Capacity L(mm) W(mm) H(mm) Weight(Kg) Remarks Model No. Capacity L(mm) W(mm) H(mm) Weight(Kg) Remarks
Navigation Panel AC220/230V 200 276 92 3.5 Signal Panel AC220/230V 200 276 92 3.2

www.daeyang.co.kr 92 www.daeyang.co.kr 93
 Product List

Hazardous Fluorescent Light

FX-dC 100 FL-e 101

Explosion Proof Increased Safety Fluorescent

Fluorescent Ceiling Light Ceiling Light

FL-ed 102 FL-edg 103

HAZARDOUS AREA LIGHT

Increased Safety Increased Safety Fluorescent

Fluorescent Ceiling Light Ceiling Light

FL-eB 104
Increased Safety
Fluorescent Ceiling Light

Hazardous Incandescent Light

ELC 105 EX-611 106

Explosion Proof Explosion Proof Incandescent

Incandescent Ceiling Light Ceiling Light

Product List
EX-612 107 EX-613 108
Explosion Proof Explosion Proof Incandescent
Incandescent Ceiling Light Ceiling Light

EXF-613 109 EX-622 110

Explosion Proof Compact Explosion Proof Incandescent

Fluorescent Ceiling Light Ceiling Light

EXHL-01 111
Explosion Proof Portable
Hand Lamp

Hazardous Flood Light

IL-1A 112 IL-1B 113
Explosion Proof Explosion Proof Incandescent
Incandescent Light Flood Light

HAZARDOUS
MH-1A 114 HPS-1A 115
Explosion Proof Explosion Proof High Pressure
Metal Halide Light Sodium Light

AREA LIGHT
www.daeyang.co.kr 95
 Product List

Hazardous Flood Light

MH-1B 116 HPS-1B 117
Explosion Proof Explosion Proof High Pressure
Metal Halide Light Sodium Light

HPS-1B-F1 118 PF-X 119

HAZARDOUS AREA LIGHT

HAZARDOUS AREA LIGHT

Explosion Proof High Pressure Explosion Proof High
Sodium Flood Light Pressure Sodium
250W & 400W & Halogen Flood Light

PF-HnR 120 PF-SBnR 121

Increased Safety Halogen Increased Safety Flood Light
Flood Light

Hazardous Junction Box

JB3 122 JB4 123
Increased Safety Explosion Proof Junction Box
Junction Box

Product List
Hazardous Switch
EX-SR 124
Explosion Proof
Rotary Switch

HAZARDOUS
AREA LIGHT
 Lighting for marine use 2010-2011

Technical Data
The International Electrotechnical Commission writes technical standards including the 79 series
and is comprised of nations throughout the world including Canada

Class I Class ll Class lll COMPARING ZONE AND

Flammable Gases, Vapours or Liquids Combustible Dusts Ignitable Fibers and Flyings
HAZARDOUS LOCATION MARKINGS DIVISION SYSTEMS
Division System Zone System (Only typical Methods of Protection Listed)
HAZARDOUS AREA LIGHT

HAZARDOUS AREA LIGHT

Zone 0
Ignitable concentrations of Class I, II & III, Division 1 and 2 Zone 0
gases, vapours, or liquids are Intrinsically Safe “ia”
continuously present under Required Class(es), Division(s), Gas/Dust Group(s), Temperature Code.
normal operating conditions Example Class I, Division 1, Group C & D, T4A Zone 1 Division 1
Division 1 Zone 1 Division 1 Division 1 Optional Class1, Zone1, Group IIB IIA T4 Division 1 Approved Class I Division 1
Ignitable concentrations of Ignitable concentrations of Ignitable concentrations of Ignitable concentrations of Flameproof “d” Equipment
gases, vapours, or liquids may gases, vapours, or liquids may combustible dusts may be fibers may be present under Class I, Zone 0, 1 and 2 Increased Safety “e”
be present under normal be present under normal present under normal normal operating conditions
operating conditions operating conditions operating conditions Zone 2 Division 2
Required Ex, Protection Method(s), II, Gas Group(s), T Temperature Code.
Division 2 Zone 2 Division 2 Division 2 Example Ex de IIB T4 Zone 0 and 1 Equipment Division 1 and 2 Equipment
Ignitable concentrations of Ignitable concentrations of Ignitable concentrations of Ignitable concentrations of Optional Class1, Zone1, Group IIB T4 Division 2 Approved Flameproof “d”
gases, vapours, or liquids are gases, vapours, or liquids are combustible dusts are not fibers are not likely present Non-Sparking “n” Increased Safety “e”
not likely present under normal not likely present under normal likely present under normal under normal operating Non-Sparking “n”
operating conditions operating conditions operating conditions conditions
Note : Division/Zone 1 represents about 5% while
Class I Groups Division 1 and 2 Class I Groups Zone 0, 1 and 2 Class II Groups Division 1 and 2 Class III Groups
A (acetylene) IIC (acetylene and hydrogen) E (metal dusts) None Division/Zone2 represents about 95% of a typical
B (hydrogen) IIB (ethylene) F (coal) Canadian hazardous petrochemical area.
C (ethylene) IIA (propane) G (grain)
D (propane)

Technical Data
Technical Data

Note : There is no IEC system that covers CEC Class II and Class III.
IEC PRODUCT MARKINGS CLARIFICATION
Ex Indicates suitability for use in hazardous locations.
T-RATINGS Heat producing equipment is marked with a Temperature Code, to indicate the maximum
de Indicates type “d” and “e” protection.
surface temperature.
“T” Code (Division System) T1 T2 T2A T2B T2C T2D T3 T3A T3B T3C T4 T4A T5 T6 II Indicates “Above Ground” usage.
“T” Code (Zone System) T1 T2 T3 T4 T5 T6 C Indicates group IIC gases.
Max. Surface Temp. (°C) 450° 300° 280° 260° 230° 215° 200° 180° 165° 160° 135° 120° 100° 85° T6 Indicates T6 temperature rating.
Note : There are no intermediate “T” ratings (e.g. T2A) in the Zone system

ZONE SYSTEM PROTECTION METHODS IEC INGRESS PROTECTION IP RATINGS

Typically a two-digit number
Area where product can be used Letter Designation Of Protection Type of Protection
Protection Against Solids Protection Against Liquids
Zone 0, 1, 2 ia Intrinsically Safe (Apparatus is incapable of releasing
enough energy to cause an explosion) 0 - No Protection. 0 - No Protection.
ib Encapsulation (Arcing devices enclosed in Resin) 1 - Protected against solid bodies larger than 50mm. e.g. Hand. 1 - Protected against vertically falling drops. e.g. Condensation.
2 - Protected against solid bodies larger than 12mm. e.g. Finger. 2 - Protected against falling drops of water tilted 15 degrees from
m Flameproof (Enclosures can contain an internal explosion)
3 - Protected against solid bodies larger than 2.5mm. e.g. vertical. (Type 2)
Zone 1, 2 d Increased Safety
(Enclosures do not allow the ingress of hazardous gases) Tool, wires. (Type 1) 3 - Protected against falling rain, tilted 60 degrees from vertical.
4 - Protected against solid bodies larger than 1.0mm. e.g. (Type 3)
e Intrinsically Safe (Apparatus is incapable of releasing
enough energy to cause an explosion) Small wires. 4 - Protected against splashing water from all directions. (Type 3R)
5 - Protected against dust. No harmful deposits. (Type 5) 5 - Protected against jets of water from all directions. (Type 4)
o Oil immersion (Arcing devices enclosed in Oil)
6 - Completely protected against dust. 6 - Protected against jets of water of similar force as heavy seas
g Powder Filling from all directions.
(Arcing devices enclosed in finely ground powder)
7 - Protected against effects of immersion. (Type 6)
p Purged/Pressurized (Pressure higher than surrounding area 8 - Protected against effects of submersion.
maintained within enclosure)
Zone 2 nA Nonincendive (Hermetically Sealed) Note : Equivalent CSA Type (Nema), indicated in parenthesis. A third digit is occasionally used, and
reflects the effects against mechanical forces.
nC Non-Sparking Device (Non-arcing device)
nR Restricted Breathing
(Enclosures restrict the ingress of hazardous gases)

www.daeyang.co.kr 98 www.daeyang.co.kr 99
 Lighting for marine use 2010-2011 Lighting for marine use 2010-2011

Fx-dc Explosion Proof Fluorescent Ceiling Lightt IP67 FL-e Increased Safety Fluorescent Ceiling Light IP67
Application Application
Hazardous areas Hazardous areas where flammable
vapor, corrosive gases or moisture are
Protection degree IP67 present
Explosion degree : Ex d IIC T6
Standard : IEC 60079-0 and IEC Protection degree IP67
60079-1 Explosion degree : Ex e II T4,
Class l Division 2 Group A,B,C,D
HAZARDOUS AREA LIGHT

HAZARDOUS AREA LIGHT

Materials Standard : IEC 60079-0 and IEC
Body : Aluminium die casting 60079-1, IEC 60079-7
Diffuser : Recognized high impact
polycarbonate Materials
Body : Stainless steel sheet deep drawn
Finish Diffuser : Polycarbonate
Body : Yellow epoxy powder coat and Latch : Stainless steel
stove enamelled
Finish
Equipment Body : White epoxy powder coat and
Fluorescent lamp : 18/20W, 36/40W stove enamelled (Munsell No. N-9.3)
Light sources : T26
Lamp base : G13 Equipment
One and two cable glands : NPT 1/2” Fluorescent lamp : 20/40W
and NPT 3/4” Light sources : T32(One pin)
Lamp base : Fa 6
Electrical One and two cable glands : NPT 1/2”
AC100~240V, 50/60Hz are available and NPT 3/4”
on request Elastomer sealing gasket

Hazardous Fluorescent Light

Ballast : Electronic Permissible temperature : Max. -20°C
Hazardous Fluorescent Light

Electrical
AC 100~240V, 50/60Hz are available
on request
Ballast : Rapid

Technical Drawing Light Distribution Curve [Cd / 1000lm] Technical Drawing Light Distribution Curve [Cd / 1000lm]

120° 120° 120° 120°

40 75

90° 90° 90° 90°

40 75

80 60° 150 60°

60° 60°

120 225

160 300
30° 30° 30° 30°

Specification Option - Battery back-up

Model No. Capacity L(mm) W(mm) H(mm) D(mm) Weight(Kg) Remarks

FX-220dCG1 18W X 2 780 181 186 565 7.78 1gland Specification
FX-240dCG1 36W X 2 1385 181 186 1180 10.6 1gland Model No. Capacity L(mm) W(mm) H(mm) Weight(Kg) Remarks
FX-220dCG1 18W X 2 780 181 186 565 7.78 2gland FL-220e206G2 20W X 2 706 220 135 5.2

FX-240dCG1 36W X 2 1385 181 186 1180 10.6 2gland FL-240e206G2 40W X 2 1312 220 135 9.0

www.daeyang.co.kr 100 www.daeyang.co.kr 101

 Lighting for marine use 2010-2011 Lighting for marine use 2010-2011

FL-ed Increased Safety Fluorescent Ceiling Light IP67 FL-edg Increased Safety Fluorescent Ceiling Light IP67
Application Application
Hazardous areas where flammable Hazardous areas where flammable
vapor, corrosive gases or moisture are vapor, corrosive gases or moisture are
present present

Protection degree IP67 Protection degree IP67

Explosion degree : EEx ed IIC T5 Explosion degree : Ex demb IIC T5,
Standard : IEC 60079-0 and IEC Standard : IEC 60079-0 and IEC
HAZARDOUS AREA LIGHT

HAZARDOUS AREA LIGHT

60079-1, IEC 60079-7 60079-1, IEC 60079-7, IEC 60079-18
Interlock switch : Exd IIC T6 Interlock switch : Exd IIC

Materials Materials
Body : Stainless steel sheet deep drawn Body : Stainless steel sheet deep drawn
Diffuser : Polycarbonate Diffuser : Polycarbonate
Latch : Stainless steel Latch : Stainless steel

Finish Finish
Body : White epoxy powder coat and Body : White epoxy powder coat and
stove enamelled (Munsell No. N-9.3) stove enamelled (Munsell No. N-9.3)

Equipment Equipment
Fluorescent lamp : 20/40W Fluorescent lamp : 18/36W
Light sources : T32(One pin) Light sources : T26
Lamp base : Fa 6 Lamp base : G13
One and two cable glands : NPT 1/2” One and two cable glands : NPT 1/2”
and NPT 3/4” and NPT 3/4”
Elastomer sealing gasket Elastomer sealing gasket

Hazardous Fluorescent Light

Permissible temperature : Max. -20°C Permissible temperature : Max. -20°C
Hazardous Fluorescent Light

Electrical Electrical
AC 100~240V, 50/60Hz are available AC 100~240V, 50/60Hz are available
on request on request
Ballast : Rapid Ballast : Electronic

Technical Drawing Light Distribution Curve [Cd / 1000lm] Technical Drawing Light Distribution Curve [Cd / 1000lm]

120° 120° 120° 120°

20 35

90° 90° 90° 90°

20 35

60° 40 60° 60° 70 60°

60 105

80 140
30° 30° 30° 30°

Specification Specification
Model No. Capacity L(mm) W(mm) H(mm) Weight(Kg) Remarks Model No. Capacity L(mm) W(mm) H(mm) Weight(Kg) Remarks
FL-220ed206G2 20W X 2 706 220 135 5.6 FL-220edg 18W X 2 706 220 135 4.95

FL-240ed206G2 40W X 2 1312 220 135 9.4 FL-240edg 36W X 2 1312 220 135 8.23

www.daeyang.co.kr 102 www.daeyang.co.kr 103

 Lighting for marine use 2010-2011 Lighting for marine use 2010-2011

FL-eB Increased Safety Fluorescent Ceiling Light IP67 ELC Explosion Proof Incandescent Ceiling Light IP56
Application Application
Hazardous areas where flammable Hazardous areas where flammable
vapor, corrosive gases or moisture are vapor, corrosive gases or moisture are
present present
Protection degree IP67 Protection degree IP56
Explosion degree : Ex emd IIC T4
Explosion degree : Ex d IIB T4
Standard : EN50014-1997+Amds 1&2
and EN50019-2000 and EN50028-1987 Standard : IEC 60079-0 and IEC
HAZARDOUS AREA LIGHT

HAZARDOUS AREA LIGHT

Interlock switch : Exd IIC T6 60079-1

Materials Materials
Body : Stainless steel sheet deep drawn Body : Cast Brass
Cover : Polycarbonate Globe : Heat and impact resistant glass
Latch : Stainless steel Guard : Stainless steel

Finish Finish
Body : White epoxy powder coat and Body : Light green epoxy powder coat
stove enamelled (Munsell No. N-9.3) and stove enamelled
(Munsell No. 7.5BG 7/2)
Equipment
Guard : White (Munsell No. N-9.3)
Fluorescent lamp : 20/40W
Light sources : T32 (One pin)
Lamp base : Fa 6 Equipment
Battery : 7.2V Ni-cd / 12V Ni-cd Incandescent lamp : 20W
One and two cable glands : NPT 1/2” Lamp base : FB15
and NPT 3/4” One and two cable entries
Elastomer sealing gasket (Diameter : Max.16mm cable)
Permissible temperature : Max. -10°C

Hazardous Incandescent Light

Electrical
Hazardous Fluorescent Light

Electrical AC 100~240V are available on request

AC 100~240V, 50/60Hz are available on request DC24V
Battery : Ni-cd battery set for 3hours
emergency operation
Ballast : Electronic

Technical Drawing Light Distribution Curve [Cd / 1000lm] Technical Drawing Light Distribution Curve [Cd / 1000lm]

120° 120° 120° 120°

35 25

90° 90° 90° 90°

35 25

60° 70 60° 50
60° 60°

105 75

140 100
30° 30° 30° 30°

Specification Option - Battery back-up

Model No. Capacity L(mm) W(mm) H(mm) Weight(Kg) Remarks Specification

FL-220eB 20W X 2 704 145 177 7.5 3 hours Model No. Capacity L(mm) W(mm) H(mm) Weight(Kg) Remarks
FL-240eB 40W X 2 1312 145 177 11.5 1.5 hours ELC-2324 20W 185 185 168 4.2

www.daeyang.co.kr 104 www.daeyang.co.kr 105

 Lighting for marine use 2010-2011 Lighting for marine use 2010-2011

EX-611 Explosion Proof Incandescent Ceiling Light IP56 EX-612 Explosion Proof Incandescent Ceiling Light IP56
Application Application
Hazardous areas where flammable Hazardous areas where flammable
vapor, corrosive gases or moisture are vapor, corrosive gases or moisture are
present present

Protection degree IP56 Protection degree IP56

Explosion degree : Ex d IIB T5 Explosion degree : Ex d IIB T4
Standard : IEC 60079-0 and IEC 60079-1 Standard : IEC 60079-0 and IEC
HAZARDOUS AREA LIGHT

HAZARDOUS AREA LIGHT

60079-1
Materials
Body : Cast Brass Materials
Globe : Heat and impact resistant glass Body : Cast
Guard : Stainless steel Globes : Heat and impact resistant glass
Guard : Stainless steel
Finish
Body : Light green epoxy powder coat Finish
and stove enamelled Body : Light green epoxy powder coat
(Munsell No. 7.5BG 7/2) and stove enamelled
Guard : White (Munsell No. N-9.3 (Munsell No. 7.5BG 7/2)
Guard : White (Munsell No. N-9.3)
Equipment
Incandescent lamp : 60W Equipment
Lamp base : E26/27 Incandescent lamp : 100W
One and two cable entries Lamp base : E26/27
(Diameter : Max.16mm cable One and two cable entries
(Diameter : Max.16mm cable)
Electrical

Hazardous Incandescent Light

AC 100~240V are available on request Electrical
Hazardous Incandescent Light

AC 100~240V are available on request

Technical Drawing Light Distribution Curve [Cd / 1000lm] Technical Drawing Light Distribution Curve [Cd / 1000lm]

120° 120° 120° 120°

20 20

90° 90° 90° 90°

20 20

60° 40 60° 60° 40 60°

60 60

80 80
30° 30° 30° 30°

Specification Specification
Model No. Capacity L(mm) W(mm) H(mm) Weight(Kg) Remarks Model No. Capacity L(mm) W(mm) H(mm) Weight(Kg) Remarks
EX-61120 60W 205 257 230 10.2 EX-61220 100W 205 265 250 13.8

www.daeyang.co.kr 106 www.daeyang.co.kr 107

 Lighting for marine use 2010-2011 Lighting for marine use 2010-2011

EX-613 Explosion Proof Incandescent Ceiling Light IP67 EXF-613 Explosion Proof Compact Fluorescent Ceiling Light IP67
Application Application
Hazardous areas where flammable Hazardous areas where flammable
vapor, corrosive gases or moisture are vapor, corrosive gases or moisture are
present present

Protection degree IP67 Protection degree IP67

Explosion degree : Ex d IIC T5 Explosion degree : Ex d IIC T6
Standard : IEC 60079-0 and IEC Standard : IEC 60079-0 and IEC
HAZARDOUS AREA LIGHT

HAZARDOUS AREA LIGHT

60079-1 60079-1

Materials Materials
Body : Cast bronze Body : Cast bronze
Globe : Heat and impact resistant glass Globe : Heat and impact resistant glass
Guard : Stainless steel Guard : Stainless steel

Finish Finish
Body & Guard : Natural Body & Guard : Natural

Equipment Equipment
Incandescent lamp : Max.100W Fluorescent lamp : Max. 23W (Compact)
Lamp base : E26/27 Lamp base : E26/27
One and two cable glands : NPT 1/2” One and two cable glands : NPT 1/2”
and NPT 3/4” and NPT 3/4”
Shock absorbing construction
Electrical
AC 100~240V are available on request
Electrical

Hazardous Incandescent Light

AC 100~240V are available on request
Hazardous Incandescent Light

Technical Drawing Light Distribution Curve [Cd / 1000lm] Technical Drawing Light Distribution Curve [Cd / 1000lm]

120° 120° 120° 120°

25 40

90° 90° 90° 90°

25 40

60° 50 60° 80
60° 60°

75 120

100 160
30° 30° 30° 30°

Specification Specification
Model No. Capacity L(mm) W(mm) H(mm) Weight(Kg) Remarks Model No. Capacity L(mm) W(mm) H(mm) Weight(Kg) Remarks
EX-61320 100W 256 250 252 14 EXF-61320 23W 256 250 285 14

www.daeyang.co.kr 108 www.daeyang.co.kr 109

 Lighting for marine use 2010-2011 Lighting for marine use 2010-2011

EX-622 Explosion Proof Incandescent Ceiling Light IP56 EXHL-01 Explosion Proof Portable Hand Lamp IP56
Application Application
Hazardous areas where flammable Hazardous areas
vapor, corrosive gases or moisture are
present Protection degree IP56
Explosion degree : Ex de IIB T3
Protection degree IP56 Standard : IEC 60079-0 and IEC
Explosion degree : Ex d IIB T3 60079-1, IEC 60079-7
Standard : IEC 60079-0 and IEC
HAZARDOUS AREA LIGHT

HAZARDOUS AREA LIGHT

60079-1 Materials
Body : Cast aluminium
Materials Guard : Cast aluminium
Body : Cast Brass Globe : Heat and impact resistant glass
Globe : Heat and impact resistant glass
Guard : Stainless steel Finish
Guard : Light gray epoxy powder coat
Finish and stove enamelled
Body & Guard : Natural
Equipment
Equipment Incandescent lamp : 60/100W
ncandescent lamp : 100W Lamp base : E26/27
Lamp base : E26/27
One and Two cable glands : NPT1/2 “ Electrical
and NPT 3/4 “ AC 100~240V are available on request

Electrical
AC 100~240V are available on request

Hazardous Incandescent Light

Hazardous Incandescent Light

Technical Drawing Light Distribution Curve [Cd / 1000lm] Technical Drawing Light Distribution Curve [Cd / 1000lm]

120° 120° 120° 120°

20 100

90° 90° 90° 90°

20 100

60° 40 60° 60° 200 60°

60 300

80 400
30° 30° 30° 30°

Specification Specification
Model No. Capacity L(mm) W(mm) H(mm) Weight(Kg) Remarks Model No. Capacity L(mm) W(mm) H(mm) Weight(Kg) Remarks
EX-62220 100W 199 142 230 4.2 EXHL-01 60/100W 487 113 113 2.0

www.daeyang.co.kr 110 www.daeyang.co.kr 111

 Lighting for marine use 2010-2011 Lighting for marine use 2010-2011

IL-1A Explosion Proof Incandescent Light IP56 IL-1B Explosion Proof Incandescent Flood Light IP56
Application Application
IL-1A lighting fixtures are used in : IL-1B lighting fixtures are used in :
Manufacturing plants, refineries, Manufacturing plants, refineries,
chemical, petrochemical and other chemical, petrochemical and other
industrial process facilities. industrial process facilities.

Waste or sewage treatment facilities, Waste or sewage treatment facilities,

offshore, dockside,harbor installation offshore, dockside,harbor installation
and other heavy industrial applications. and other heavy industrial applications.
HAZARDOUS AREA LIGHT

HAZARDOUS AREA LIGHT

Areas where ignitible concentrations of Areas where ignitible concentrations of
flammable gases or vapors are present flammable gases or vapors are present
only due to abnormal, unusual, only due to abnormal, unusual,
or accidental conditions. or accidental conditions.

Installation where moisture, dirt, dust, Installation where moisture, dirt, dust,
vibration, corrosion and rough usage are vibration, corrosion and rough usage
applied to. are applied to.

Protection degree IP56 Protection degree IP56
Explosion protection : Explosion degree : Ex d llB T3
Class I Division1 Group C&D Class I Division1 Group C&D
Standard : UL844, IEC 60079-0 and IEC Standard : UL844, IEC 60079-0 and IEC
60079-1 60079-1

Materials Materials
Body : Aluminium die casting Body : Aluminium die casting
Mounting : Copper free aluminium Mounting : Copper free aluminium
(Less than 0.4 of 1%) (Less than 0.4 of 1%)
Guard : Copper free aluminium Globe : Hard and impact resistant

Hazardous Flood Light

Hazardous Flood Light

(Less than 0.4 of 1%) internally fluted glass

Globe : Hard and impact resistant inter-
nally fluted glass Finish
Body & guard : Light gray epoxy
Finish powder coat and stove enamelled
Body & guard : Light gray epoxy
powder coat and stove enamelled Equipment
Technical Drawing Technical Drawing Incandescent lamp : 300W
Equipment Lamp base : E39/40
Incandescent lamp : One and two cable gland : NPT 1/2”
40/60/100/150/200/300W and NPT 3/4”
Lamp base : E39/40
One and two cable glands : NPT 1/2” Electrical
and NPT 3/4” AC 100~240V are available on request

Electrical
AC 100~240V are available on request Light Distribution Curve [Cd / 1000lm]

120° 120°
100
Light Distribution Curve [Cd / 1000lm]

120° 120° 90° 90°

100
100

90° 90° 60° 200 60°

Specification 300
100
Model No. L(mm) W(mm) H(mm) Remarks
200 400
60° 60°
IL-1A-C 216 216 427 Ceiling 30° 30°
Specification
IL-1A-P 216 216 424 Pendant 300

IL-1A-W 216 216 427 Wall Bracket

Model No. Capacity L(mm) W(mm) H(mm) Weight(Kg) Remarks
400
IL-1A-S 216 216 406 Stanchion 30° 30° IL-1B-300-F 300W 255 440 340 13.8

www.daeyang.co.kr 112 www.daeyang.co.kr 113

 Lighting for marine use 2010-2011 Lighting for marine use 2010-2011

MH-1A Explosion Proof Metal Halide Light IP56 HPS-1A Explosion Proof High Pressure Sodium Light IP56
Application Application
MH-1A lighting fixtures are used in : HPS-1A lighting fixtures are used in :
Manufacturing plants, refineries, Manufacturing plants, refineries,
chemical, petrochemical and other chemical, petrochemical and other
industrial process facilities. industrial process facilities.

Waste or sewage treatment facilities, Waste or sewage treatment facilities,

offshore, dockside,harbor installation offshore, dockside,harbor installation
and other heavy industrial applications. and other heavy industrial applications.
HAZARDOUS AREA LIGHT

HAZARDOUS AREA LIGHT

Areas where ignitible concentrations of Areas where ignitible concentrations of
flammable gases or vapors are present flammable gases or vapors are present
only due to abnormal, unusual, only due to abnormal, unusual,
or accidental conditions. or accidental conditions.

Installation where moisture, dirt, dust, Installation where moisture, dirt, dust,
vibration, corrosion and rough usage are vibration, corrosion and rough usage are
applied to. applied to.

Protection degree IP56 Protection degree IP56

Explosion protection : Class I Division1 Explosion protection : Class I Division1
Group C&D Group C&D
Standard : UL844 Standard : UL844

Materials Materials
Body(Ballast housings) : Body(Ballast housings) :
Aluminium die casting Aluminium die casting
Mounting : Copper free aluminium Mounting : Copper free aluminium
(Less than 0.4 of 1%) (Less than 0.4 of 1%)
Guard : Copper free aluminium Guard : Copper free aluminium

Hazardous Flood Light

Hazardous Flood Light

(Less than 0.4 of 1%) (Less than 0.4 of 1%)

Globe : Hard and impact resistant Globe : Hard and impact resistant
internally fluted glass internally fluted glass

Finish Finish
Body & guard : Light gray epoxy Body & guard : Light gray epoxy
powder coat and stove enamelled powder coat and stove enamelled
Technical Drawing Technical Drawing
Equipment Equipment
Metal Halide lamp : 175W Sodium lamp : 70/100/150W
Lamp base : E39/40 Lamp base : E39/40
One and two cable gland : NPT 1/2” One and two cable glands : NPT 1/2”
and NPT 3/4” and NPT 3/4”

Electrical Electrical
AC 100~240V are available on request AC 100~240V, 50/60Hz are available
on request

Light Distribution Curve [Cd / 1000lm] Light Distribution Curve [Cd / 1000lm]

120° 120° 120° 120°

30 30

90° 90° 90° 90°

Specification Specification
30 30
Model No. L(mm) W(mm) H(mm) Remarks Model No. L(mm) W(mm) H(mm) Remarks
60° 60 60° 60° 60 60°
MH-1A-C 304 304 538 Ceiling HPS-1A-C 304 304 538 Ceiling
MH-1A-P 304 304 537 Pendant 90 HPS-1A-P 304 304 537 Pendant 90

MH-1A-W 304 304 552 Wall Bracket HPS-1A-W 304 304 552 Wall Bracket
120 120
MH-1A-S 304 304 572 Stanchion 30° 30° HPS-1A-S 304 304 572 Stanchion 30° 30°

www.daeyang.co.kr 114 www.daeyang.co.kr 115

 Lighting for marine use 2010-2011 Lighting for marine use 2010-2011

MH-1B Explosion Proof Metal Halide Light IP56 HPS-1B Explosion Proof High Pressure Sodium Light IP56
Application Application
MH-1B lighting fixtures are used in : HPS-1B lighting fixtures are used in :
Manufacturing plants, refineries, Manufacturing plants, refineries,
chemical, petrochemical and other chemical, petrochemical and other
industrial process facilities. industrial process facilities.

Waste or sewage treatment facilities, Waste or sewage treatment facilities,

offshore, dockside,harbor installation offshore, dockside,harbor installation
and other heavy industrial applications. and other heavy industrial applications.
HAZARDOUS AREA LIGHT

HAZARDOUS AREA LIGHT

Areas where ignitible concentrations of Areas where ignitible concentrations of
flammable gases or vapors are present flammable gases or vapors are present
only due to abnormal, unusual, only due to abnormal, unusual,
or accidental conditions. or accidental conditions.

Installation where moisture, dirt, dust, Installation where moisture, dirt, dust,
vibration, corrosion and rough usage are vibration, corrosion and rough usage are
applied to. applied to.

Protection degree IP56 Protection degree IP56

Explosion protection : Class I Division1 Explosion protection : Class I Division1
Group C&D Group C&D
Standard : UL844 Standard : UL844

Materials Materials
Body(Ballast housings) : Body(Ballast housings) :
Aluminium die casting Aluminium die casting
Mounting : Copper free aluminium Mounting : Copper free aluminium
(Less than 0.4 of 1%) (Less than 0.4 of 1%)
Guard : Copper free aluminium Guard : Copper free aluminium

Hazardous Flood Light

Hazardous Flood Light

(Less than 0.4 of 1%) (Less than 0.4 of 1%)

Globe : Hard and impact resistant Globe : Hard and impact resistant
internally fluted glass internally fluted glass

Finish Finish
Body & guard : Light gray epoxy Body & guard : Light gray epoxy
powder coat and stove enamelled powder coat and stove enamelled
Technical Drawing Technical Drawing
Equipment Equipment
Metal Halide lamp : 250/400W Sodium lamp : 200/250/300/400W
Lamp base : E39/40 Lamp base : E39/40
One and two cable glands : NPT 1/2” One and two cable glands : NPT 1/2”
and NPT 3/4” and NPT 3/4”

Electrical Electrical
AC 100~240V, 50/60Hz are available AC 100~240V, 50/60Hz are available
on request on request

Light Distribution Curve [Cd / 1000lm] Light Distribution Curve [Cd / 1000lm]

120° 120° 120° 120°

30 30

90° 90° 90° 90°

Specification Specification
30 30
Model No. L(mm) W(mm) H(mm) Remarks Model No. L(mm) W(mm) H(mm) Remarks
60° 60 60° 60° 60 60°
MH-1B-C 304 304 618 Ceiling HPS-1B-C 304 304 618 Ceiling
MH-1B-P 304 304 617 Pendant 90 HPS-1B-P 304 304 617 Pendant 90

MH-1B-W 304 304 632 Wall Bracket HPS-1B-W 304 304 632 Wall Bracket
120 120
MH-1B-S 304 304 652 Stanchion 30° 30° HPS-1B-S 304 304 652 Stanchion 30° 30°

www.daeyang.co.kr 116 www.daeyang.co.kr 117

 Lighting for marine use 2010-2011 Lighting for marine use 2010-2011

HPS-1B-F1 Explosion Proof High Pressure Sodium Flood Light 250W & 400W IP65
|
PF-X Explosion Proof High Pressure Sodium & Halogen Flood Light IP67
Application Application
Hazardous areas, cargo hold Hazardous areas, cargo hold

Protection degree IP65 Protection degree IP67

Explosion protection : Ex de llC T5, 250W Explosion protection : Ex de llB T3
Ex de llC T4, 400W (Max. 500W), Ex de llB T4 (70W)
Standard : IEC 60079-0 and IEC Standard : IEC 60079-0, IEC 60079-1,
60079-1, IEC 60079-7 IEC 60079-7
HAZARDOUS AREA LIGHT

HAZARDOUS AREA LIGHT

Materials Materials
Body : Cast aluminium Body : Cast aluminium
Guard : Stainless steel Glass : Hard and impact resistant glass
Globe : Hard and impact resistant glass
Finish
Finish Body : Yellow epoxy powder coat and
Body : Yellow epoxy powder coat and stove enamelled
stove enamelled
Guard : Epoxy powder coat and stove Equipment
enamelled(Munsell No. N9.3) H.P Sodium lamp : 70/150/250/400W
Halogen lamp : 500W
Equipment Lamp base : E39/40, E26/27 (70W)
H.P Sodium lamp : 250/400W Cable glands : NPT 1/2’’ and NPT 3/4’’
Lamp base : E39/40 Built in ballast : 70/150/250W
Cable glands : NPT 1/2’’ and NPT 3/4’’
Built in ballast Electrical
AC 100~240V, 50/60Hz are available
Electrical on request
AC 100~240V, 50/60Hz are available
on request

Hazardous Flood Light

Hazardous Flood Light

Technical Drawing Light Distribution Curve [Cd / 1000lm] Technical Drawing Light Distribution Curve [Cd / 1000lm]

120° 120° 120° 120°

35 100

90° 90° 90° 90°

35 100

60° 70 60° 60° 200 60°

105 300

140 400
30° 30° 30° 30°

Specification
Model No. Capacity L(mm) W(mm) H(mm) Weight(Kg) Remarks
PF-07SX3 70W 486 257 384 35 Sodium/Ex de IIB T4
Specification PF-15SX1 150W 595 286 439 44.5 Sodium/Ex de IIB T3

Model No. Capacity L(mm) W(mm) H(mm) Weight(Kg) Remarks PF-25SX2 250W 595 286 439 44.5 Sodium/Ex de IIB T3

HPS-1B-250-F1 250W 522 424.5 570 35 Ex de llC T5 PF-40SX2 400W 595 286 439 48 Sodium/Ex de IIB T3

HPS-1B-400-F1 400W 522 424.5 570 35 Ex de llC T4 PF-50HX2 500W 595 286 439 48 Sodium/Ex de IIB T3

www.daeyang.co.kr 118 www.daeyang.co.kr 119

 Lighting for marine use 2010-2011 Lighting for marine use 2010-2011

PF-HnR Increased Safety Halogen Flood Light IP67 PF-SBnR Increased Safety Flood Light IP67
Application Application
Hazardous areas where flammable Hazardous areas where flammable
vapor, corrosive gases or moisture are vapor, corrosive gases or moisture
present Deck and hold Chemical are present, Deck and hold, Chemical
processing and industrial area processing and industrial areas

Protection degree IP67 Protection degree IP67

Explosion degree : Ex nR II T2 Explosion degree : Ex nR II T2
Standard : IEC 60079-0 Standard : IEC 60079-0
HAZARDOUS AREA LIGHT

HAZARDOUS AREA LIGHT

IEC 60079-15 IEC 60079-15

Materials Materials
Body : Stainless steel sheet deep drawn Body : Stainless steel sheet deep drawn
Front glass : Heat and impact resistant glass Front glass : Heat and impact resistant glass
Reflector : High reflectance aluminium Reflector : High reflectance aluminium

Finish Finish
Body : White epoxy powder coat and Body : White epoxy powder coat and
stove enamelled(Munsell No. N-9.3) stove enamelled(Munsell No. N-9.3)

Equipment Equipment
Lamp base : R7S Sodium lamp : 400W
One cable glands M20 Lamp base : E39/40
(Diameter : Max. 13.1~15mm cable) One cable glands M20
Vertical adjust (Up: 40°, Down: 80°) (Diameter : 13.1~15mm cable)
Halogen lamp Vertical adjust (Up: 40°, Down:60°)
Built in ballast
Electrical
AC 100~240V, 50/60Hz are available Electrical
on request AC 100~240V, 50/60Hz are available

Hazardous Flood Light

Hazardous Flood Light

on request

Technical Drawing Light Distribution Curve [Cd / 1000lm] Technical Drawing Light Distribution Curve [Cd / 1000lm]

120° 120° 120° 120°

90 130

90° 90° 90° 90°

90 130

60° 180 60° 60° 260 60°

270 390

360 520
30° 30° 30° 30°

Specification Specification
Model No. Capacity L(mm) W(mm) H(mm) Weight(Kg) Remarks Model No. Capacity L(mm) W(mm) H(mm) Weight(Kg) Remarks
PF-HnR 300W/500W 337 137 360 5.3 Ex nR II T2 PF40SBnR-20UWCN 400W X 1 532 160 630 19.0 Ex nR II T2

www.daeyang.co.kr 120 www.daeyang.co.kr 121

 Lighting for marine use 2010-2011 Lighting for marine use 2010-2011

JB3 Increased Safety Junction Box IP67 JB4 Explosion Proof Junction Box IP66
Application Application
Hazardous areas, cargo hold Hazardous areas, cargo hold

Protection degree IP67 Protection degree IP66

Explosion protection : Ex e ll T6 Explosion degree : Ex d IIC T6
Standard : EN 50014, EN 50019 Class l, Group B,C,D
Class ll, Group E,F
Materials Standard : Ul844, IEC 60079-0 and
Body : Stainless steel IEC 60079-1
HAZARDOUS AREA LIGHT

HAZARDOUS AREA LIGHT

Cover : Stainless steel
Materials
Finish Body : Aluminium iron and brass
Body : Natural Cover : Aluminium iron and brass
Cover : Natural
Finish
Equipment Body : Epoxy powder coat and stove
Cable glands (Manufacture depending enamelled
on order specification) Cover : Epoxy powder coat and stove
enamelled
Electrical
AC 418~750V, 15~120A Equipment
Cable glands (1~4 gland) : NPT 1/2”
and NPT 3/4”

Electrical
AC 250V, 20A

Technical Drawing

Hazardous Junction Box

Hazardous Junction Box

Technical Drawing

Specification
Model No. L(mm) W(mm) H(mm) D1(mm) D2(mm) Remarks
JB3-15X 229 152 218 202 131 Terminal: 15P
JB3-20X 274 184 218 234 124 Terminal: 20P
JB3-25X 324 234 218 284 174 Terminal: 25P
JB3-45X 306 306 218 356 156 Terminal: 45P
Specification
JB3-50X 324 372 218 422 174 Terminal: 50P
JB3-90X 448 372 218 422 298 Terminal: 90P Model No. L(mm) W(mm) H(mm) Weight(Kg) Remarks

JB3-100X 510 372 218 422 360 Terminal: 100P JB4-A 137 137 75 1.4 Aluminium

JB3-165X 510 510 218 560 360 Terminal: 165P JB4-I 137 137 75 2.64 Cast iron

JB3-300X 780 510 218 560 560 Terminal: 300P JB4-B 137 137 75 3.4 Brass

www.daeyang.co.kr 122 www.daeyang.co.kr 123

 Lighting for marine use 2010-2011

EX-SR Explosion Proof Rotary Switch IP56

Application
Remote control circuit
Outdoor use (Wet & moisture area)
Chemical processing and industrial areas

Protection degree IP56

Explosion degree : Ex d IIC T6
Standard : IEC 60079-0 and
IEC 60079-1
HAZARDOUS AREA LIGHT

Materials
Body : Aluminium and brass
Cover : Aluminium and brass

Finish
Body : Epoxy powder coat and stove
enamelled
Cover : Epoxy powder coat and stove
enamelled

Equipment
Two cable glands : NPT 1/2” and NPT 3/4”

Electrical
AC250V, 16A
Hazardous Switch

Technical Drawing

Specification
Model No. Capacity L(mm) W(mm) H(mm) Weight(Kg) Remarks

EX-SR-A

EX-SR-B
250V/20A

250V/20A
140

140
113

113
138

138
3.5

4.2
Aluminium

Brass
RECEPTACLE & SWITCH
www.daeyang.co.kr 124
 Product List Product List

Watertight Receptacle Watertight Junction box

RT-PSE/BNE 129 RT-PSC/BNC 130 JBWS-R 143 JBWS-Q 144

Receptacle, DIN Type Receptacle, JIS Type Junction Box, DIN Type Junction Box

RT-4B 131
DC Receptacle
RECEPTACLE & SWITCH

RECEPTACLE & SWITCH

Non-Watertight Receptacle
RS1013PT 145 RS1090PT 146
Receptacle Single Surface, Receptacle Double Surface,

Watertight Switch DIN Type DIN Type

SR-PSE/BNE 132 SR-PSC/BNC 133

Rotary Switch, DIN Type Rotary Switch, JIS Type

S1014PT 147 RT-FQ2DF 148
Receptacle Single Flush, Receptacle Double Flush,
DIN Type DIN Type

SR-BNCL 134 KH-C/SLP 135

Rotary Switch with Door Limit Switch
RT-SQ1JL 149 RT-SQ2JL 150
Indicate Lamp
Receptacle Single Surface, Receptacle Double Surface,
JIS Type JIS Type
Product List

Product List
Watertight Receptacle with Switch
RT-PSES/BNES 136 RT-PSCS/BNCS 137 RT-FQ1JL 151 RT-FQ2JL 152

Receptacle with Switch, Receptacle with Switch, Receptacle Single Flush, Receptacle Double Flush,

DIN Type JIS Type JIS Type JIS Type

RT-FQ1S 153
Watertight Plug DC Receptacle Flush
PG-WPD/WBD 138 PG-WP/WB 139
Mounting Type
Plug Din type Plug, JIS Type

Watertight Receptacle for Container Non-Watertight Switch

CR-B 140 CP-B 141 SI-SQ-N 154 SI-FQ-01 155

Receptacle with Switch Plug Tumbler Switch Surface Tumbler Single Switch Flush

EXRP-2530 142 SI-FQ-02 156 S-16/2 VI 157

Receptacle with Switch Tumbler Double Tumbler Switch Flush

Switch Flush

www.daeyang.co.kr 126 www.daeyang.co.kr 127

 Lighting for marine use 2010-2011

Product List
RT-PSE/BNE Receptacle, DIN Type IP56
Non-Watertight Switch
Application
S-16/2 VP 158 SD-F-01 159
Machinery area
Tumbler Switch Surface Dimmer Switch Outdoor use (Wet and moisture area)
(Incandescent Light)
Chemical processing and industrial areas

Protection degree IP56

DIN : 89262
SD-F-02 160
Materials
RECEPTACLE & SWITCH

RECEPTACLE & SWITCH

Dimmer Switch
Body & Cover : Polycarbonate & brass
(Fluorescent Light)
Finish
Natural & Munsell No. 7.5BG7/2

Equipment
Non-Watertight Plug Two cable glands M24
(Diameter : Max.17mm cable)
PG-N 161 PG-4NB 162 Receptacle : 2-Pole + 1E
Plug Non-Watertight DC Plug
Electrical
AC 250V, 16A

Non-Watertight Junction Box

Product List

JBNF-Q4PN 163

Watertight Receptacle
Junction Box RT-3BNE

Technical Drawing

Specification
Model No. Capacity L(mm) W(mm) H(mm) Weight(Kg) Remarks
RT-3PSE AC250V/16A 138 109 58 0.4 Polycarbonate

RT-3BNE AC250V/16A 138 108 58 1.4 Brass

www.daeyang.co.kr 128 www.daeyang.co.kr 129

 Lighting for marine use 2010-2011 Lighting for marine use 2010-2011

RT-PSC/BNC Receptacle, JIS Type IP56 RT-4B DC Receptacle IP56

Application Application
Machinery area Small capacity for DC source
Outdoor use (Wet and moisture area) Wet and moisture area outdoors use
Chemical processing and industrial areas Chemical processing and industrial areas
For daylight signalling light
Protection degree IP56
Protection degree IP56
Materials
Body & Cover : PBT & brass Materials
RECEPTACLE & SWITCH

RECEPTACLE & SWITCH

(Poly Butylene Terephthalate) Body & Cover : Brass

Finish Finish
Natural & Munsell No. 7.5BG 7/2 Body : Light green epoxy powder coat
and stove enamelled
Equipment (Munsell No. 7.5BG 7/2)
Tow cable glands 20a~c
(Diameter : Max. 16mm cable) Equipment
Receptacle : 2-pole + 1E Two cable glands 20a~c
(Diameter : Max.16mm cable)
Electrical
AC250V, 15A Electrical
DC 24V, 5A
Watertight Receptacle

Watertight Receptacle
RT-3BNC

Technical Drawing Technical Drawing

Specification
Model No. Capacity L(mm) W(mm) H(mm) Weight(Kg) Remarks Specification
RT-3PSC AC250V/15A 110 114 76 0.8 PBT Model No. Capacity L(mm) W(mm) H(mm) Weight(Kg) Remarks
RT-3BNC AC250V/15A 110 114 76 1.4 Brass RT-4BSCD DC24V/5A 116 138 82 1.4

www.daeyang.co.kr 130 www.daeyang.co.kr 131

 Lighting for marine use 2010-2011 Lighting for marine use 2010-2011

SR-PSE/BNE Rotary Switch, DIN Type IP56 SR-PSC/BNC Rotary Switch, JIS Type IP56
Application Application
Machinery area Machinery area
Outdoor use (Wet and moisture area) Outdoor use (Wet and moisture area)
Chemical processing and industrial areas Chemical processing and industrial areas

Protection degree IP56 Protection degree IP56

DIN : 89270
Materials
Materials Body & Cover : PBT & brass
RECEPTACLE & SWITCH

RECEPTACLE & SWITCH

Body & Cover : Polycarbonate & brass (Poly butylene Terephthalate)
Handle : Phenol Handle : Phenol

Finish Finish
Body : Natural & Munsell No. 7.5BG 7/2 Natural & Munsell No. 7.5 BG 7/2
Cover : Black Handle : Black
Handle : Black & red
Equipment
Equipment Two cable glands 20a~c
Two cable glands M24 (Diameter : Max. 16mm cable)
(Diameter : Max.17mm cable) 1way or 3ways is available, Switch 2-Pole
1way or 3-ways is available, Switch 2-Pole
Electrical
Electrical AC 250V, 15A
AC250V, 16A
Watertight Switch

Watertight Switch
SR-1BNE SR-1BNC

Technical Drawing Technical Drawing

Specification
Model No. Capacity L(mm) W(mm) H(mm) Weight(Kg) Remarks
SR-1PSE AC250V/16A 110 100 81 0.6 Polycarbonate Specification
SR-3PSE AC250V/16A 110 100 81 0.6 3way, Polycarbonate Model No. Capacity L(mm) W(mm) H(mm) Weight(Kg) Remarks
SR-1BNE AC250V/16A 110 100 81 0.6 Brass SR-1PSC AC250V/15A 110 110 97 1.0 1way, PBT

SR-3BNE AC250V/16A 110 100 81 1.1 3way, Brass SR-3PSC AC250V/15A 110 110 97 1.0 3way, PBT

SR-1BNERh AC250V/16A 110 100 81 1.1 Red, Brass SR-1BNC AC250V/15A 110 110 97 0.6 1way, Brass

SR-3BNERh AC250V/16A 110 100 81 1.1 3way, Red, Brass SR-3BNC AC250V/15A 110 110 97 0.6 3way, Brass

www.daeyang.co.kr 132 www.daeyang.co.kr 133

 Lighting for marine use 2010-2011 Lighting for marine use 2010-2011

SR-BNCL Rotary Switch with Indicate Lamp IP56 KH-C/SLP Door Limit Switch IP56
Application Application
Machinery area Accommodation area
Outdoor use (Wet and moisture area) Chemical processing and industrial area
Chemical processing and industrial areas
Protection degree IP56
Protection degree IP56
Materials
Materials Body : Aluminium
Body & Cover : Brass Head : Zinc alloy
RECEPTACLE & SWITCH

RECEPTACLE & SWITCH

Handle : Phenol Arm : Stainless steel

Finish Finish
Brass : Natural Body : Light gray epoxy powder coat
Handle : Black and stove enamelled

Equipment Equipment
Lamp holder : B15 One cable inlet hole 15a~c
Two cable glands 20a~c
(Diameter : Max.16mm cable) Electrical
Incandescent lamp : 5W AC 250V, 6/10A
ON-OFF Switch : 2-Pole

Electrical
AC 250V, 15A
Watertight Switch

Watertight Switch
SLP2130-AL

Technical Drawing Technical Drawing

Specification
Specification Model No. Capacity L(mm) W(mm) H(mm) Weight(Kg) Remarks
Model No. Capacity L(mm) W(mm) H(mm) Weight(Kg) Remarks KH-8010C AC250V/6A 94 40 67 0.4 Gland: 15C

SR-1BNCL AC250V/15A 202 95 90 2.1 Red globe SLP2130-AL AC250V/10A 109 40 73 0.5 Gland: 15C

www.daeyang.co.kr 134 www.daeyang.co.kr 135

 Lighting for marine use 2010-2011 Lighting for marine use 2010-2011

RT-PSES/BNES Receptacle with Switch, DIN Type IP56 RT-PSCS/BNCS Receptacle with Switch, JIS Type IP56
Application Application
Machinery area Machinery area
Outdoor use (Wet and moisture area) Outdoor use (Wet and moisture area)
Chemical processing and industrial areas Chemical processing and industrial areas

Protection degree IP56 Protection degree IP56

Materials Materials
Body & Cover : Polycarbonate & brass Body & Cover : PBT & Bras
RECEPTACLE & SWITCH

RECEPTACLE & SWITCH

Handle : Phenol (Poly butylene Terephthalate)
Handle : Phenol
Finish
Body : Natural & Munsell No. 7.5 BG 7/2 Finish
Cover : Black Natural & Munsell No. 7.5 BG 7/2
Handle : Black & red Handle : Black

Equipment Equipment
Two cable glands M24 Two cable glands 20a~c
(Diameter : Max.17mm cable) (Diameter : Max.16mm cable)
Combined with switch and receptacle Combined with switch and receptacle
Receptacle 2-Pole+1E Receptacle 2-Pole + 1E
Switch : 2-Pole Switch : 2-Pole

Electrical Electrical
AC 250V, 16A AC 250V, 15A
Watertight Receptacle with Switch

Watertight Receptacle with Switch

RT-3BNES RT-3BNCS

Technical Drawing Technical Drawing

Specification
Model No. Capacity L(mm) W(mm) H(mm) Weight(Kg) Remarks
RT-3PSES AC250V/16A 133 112 98 0.5 Polycarbonate Specification
RT-3PSESRh AC250V/16A 133 112 98 0.5 Redhandle Model No. Capacity L(mm) W(mm) H(mm) Weight(Kg) Remarks
RT-3BNES AC250V/16A 138 110 98 1.4 Brass RT-3PSCS AC250V/15A 202 95 95 1.06 PBT

RT-3BNESRh AC250V/16A 138 110 98 1.4 Redhandle RT-3BNCS AC250V/15A 202 95 95 2.5 Brass

www.daeyang.co.kr 136 www.daeyang.co.kr 137

 Lighting for marine use 2010-2011 Lighting for marine use 2010-2011

PG-WPD/WBD Plug Din type IP56 PG-WP/WB Plug, JIS Type IP56
Application Application
Machinery area Machinery area
Outdoor use (Wet and moisture area) Chemical processing and industrial areas
Chemical processing and industrial areas
Protection degree IP56
Protection degree IP56
DIN : 89320 Materials
Body : Polycarbante & brass
Materials Insulator : High impact polycarbonate
RECEPTACLE & SWITCH

RECEPTACLE & SWITCH

Body : Polycarbante & brass
Finish
Finish Gray & CR Plated
Body : Natural & Munsell No. 7.5 BG 7/2
Equipment
Equipment Plug Interior : 2-Pole + 1E
Plug Interior : 2-Pole + 1E One cable gland 15c/M24
Cable gland H24
(diameter: Max.17mm cable) Electrical
AC 250V, 15A
Electrical
AC 250V, 16A
Watertight Plug

Watertight Plug
PG-W3BD PG-W3PA PG-W3B

Technical Drawing Technical Drawing

Specification
Specification Model No. Capacity Gland Pole L(mm) W(mm) H(mm) Weight(Kg) Remarks

Model No. Capacity L(mm) W(mm) H(mm) Weight(Kg) Remarks PG-W3P AC150V/15A M24 2P+1E 98 46 46 0.2 Polycarbonate

PG-W3PD AC250V/16A 137 66 66 0.5 Polycarbonate PG-W3PA AC150V/15A 15c 2P+1E 76 66 66 0.2 L-Type

PG-W3BD AC250V/16A 98 58 58 0.2 Brass PG-W3B AC150V/15A M24 2P+1E 98 46 46 0.3 Brass

www.daeyang.co.kr 138 www.daeyang.co.kr 139

 Lighting for marine use 2010-2011 Lighting for marine use 2010-2011

CR-B Receptacle with Switch IP56 CP-B Plug IP56

Application Application
Arc welding Arc welding

Protection degree IP56 Protection degree IP56

DIN EN 60309, CEE 17/2 and IEC 309 DIN EN 60309, CEE 17/2 and IEC 309

Materials Materials
Body : Cast brass Body : Cast brass
Blind cover : Nylon
RECEPTACLE & SWITCH

RECEPTACLE & SWITCH

Finish
Finish Cr Plated
Body : Natural
Equipment
Equipment Plug interior : 3-pole +1E
Socket 32A, with switch
with mechanical locking mechanism Electrical
AC 440V/32A, 500/63A are available
Electrical on request
AC 440V/32A, 500/63A are available
on request
Watertight Receptacle for Container

Watertight Receptacle for Container

CR-15063B AC500V 63A

Technical Drawing Technical Drawing

Specification Specification
Model No. Capacity Pole L(mm) W(mm) H(mm) Weight(Kg) Remarks Model No. Capacity Pole L(mm) W(mm) H(mm) Weight(Kg) Remarks
CR-14432B AC440V/32A 3P+1E 226 115 131 5.8 CP-4432B AC440V/32A 3P+1E 195 56 56 1.3

CR-15063B AC500V/63A 3P+1E 279 160 202 7.6 CP-5063B AC500V/63A 3P+1E 287 112 112 2.4

www.daeyang.co.kr 140 www.daeyang.co.kr 141

 Lighting for marine use 2010-2011 Lighting for marine use 2010-2011

EXRP-2530 Receptacle with Switch IP56 JBWS-R Junction Box, DIN Type IP56
Application Application
Suez canal search light Outdoor use (Wet and moisture area)
Chemical processing and industrial areas
Protection degree IP56 & Gastight
Standard : IEC 60529 & Suez Canal Protection degree IP56
Authority- Rule of Navigation DIN 89250
With interlock device
Combined with switch and receptacle Materials
Body & Cover : Cast brass
RECEPTACLE & SWITCH

RECEPTACLE & SWITCH

Materials
Body & Cast : Aluminium Finish
Natural
Finish
Epoxy powder coat and stove enamelled Equipment
Four or two cable glands M24
Equipment (Diameter : Max.17mm cable)
One cable gland 25c Terminal Block : 4 terminals
(diameter Max. 20mm cable )
Receptacle interior : 3-Pole+1E Electrical
AC 250V, 20A
Electrical
AC 250V, 30A
Watertight Receptacle for Container

Watertight Junction box

JBWS-R4BNI

Technical Drawing Technical Drawing

Specification
Specification Model No. Capacity L(mm) W(mm) H(mm) Weight(Kg) Remarks
Model No. Capacity L(mm) W(mm) H(mm) Weight(Kg) Remarks JBWS-R4BNJ AC250V/20A 108 118 50 1.7 4glands

EXRP-2530 AC250V/30A 235 195 460 10.5 Gastight JBWS-R4BNI AC250V/20A 108 118 50 0.9 2glands

www.daeyang.co.kr 142 www.daeyang.co.kr 143

 Lighting for marine use 2010-2011 Lighting for marine use 2010-2011

JBWS-Q Junction Box IP56 RS1013PT Receptacle Single Surface, DIN Type IP20
Application Application
Outdoor use (Wet and moisture area) Accommodation area
Chemical processing and industrial areas
Protection degree IP20
Protection degree IP56
Materials
Materials Body : ABS
Body & Cover : Polycarbonate (Acrylonitrile Butadiene Styrene)
RECEPTACLE & SWITCH

RECEPTACLE & SWITCH

Finish Finish
Munsell No. N-7.5 or 7.5BG 7/2 Polar white

Equipment Equipment
Four or two cable glands 20a~c High insulation and mechanical properties
(Diameter : Max. 16mm cable) Metal parts are protected against corrosion
Up to four pole terminal block Electrical contacts with high conductivity
Receptacle : 2-Pole+1E
Electrical
AC 250V, 20A Electrical
AC250V, 16A
Watertight Junction box

Non-Watertight Receptacle
Technical Drawing Technical Drawing

Specification Specification
Model No. Capacity L(mm) W(mm) H(mm) Weight(Kg) Remarks Model No. Capacity L(mm) W(mm) H(mm) Weight(Kg) Remarks
JBWS-Q4PSD AC250V/20A 170 140 67 0.35 4glands RS1013PT 250V/16A 63 71 42 0.07

www.daeyang.co.kr 144 www.daeyang.co.kr 145

 Lighting for marine use 2010-2011 Lighting for marine use 2010-2011

RS1090PT Receptacle Double Surface, DIN Type IP20 S1014PT Receptacle Single Flush, DIN Type IP20
Application Application
Accommodation area Accommodation area

Protection degree IP20 Protection degree IP20

Materials Materials
Body : ABS Body & Cover : ABS
(Acrylonitrile Butadiene Styrene) (Acrylonitrile Butadiene Styrene)
RECEPTACLE & SWITCH

RECEPTACLE & SWITCH

Finish Finish
Polar white Polar white

Equipment Equipment
High insulation and mechanical properties High insulation and mechanical properties
Metal parts are protected against corrosion Metal parts are protected against corrosion
Electrical contacts with high conductivity Electrical contacts with high conductivity
Receptacle : 2-Pole+1E Receptacle : 2-Pole+1E

Electrical Electrical
AC250V, 16A AC250V, 16A
Non-Watertight Receptacle

Non-Watertight Receptacle
Technical Drawing Technical Drawing

Specification
Specification Model No. Capacity L(mm) W(mm) H(mm) Weight(Kg) Remarks
Model No. Capacity L(mm) W(mm) H(mm) Weight(Kg) Remarks S-1014PT 250V/16A 84 84 56 0.3

RS1090PT 250V/16A 104 71 40 0.11 S-2014PT 250V/16A 155 84 56 0.5

www.daeyang.co.kr 146 www.daeyang.co.kr 147

 Lighting for marine use 2010-2011 Lighting for marine use 2010-2011

RT-FQ2DF Receptacle Double Flush, DIN Type IP20 RT-SQ1JL Receptacle Single Surface, JIS Type IP20
Application Application
Accommodation area Accommodation area

Protection degree IP20 Protection degree IP20

Materials Materials
Body : Urea resin Body : Urea resin
Cover : ABS
Finish (Acrylonitrile Butadiene Styrene)
RECEPTACLE & SWITCH

RECEPTACLE & SWITCH

Polar white
Finish
Equipment Polar white
High insulation and mechanical properties
Metal parts are protected against corrosion Equipment
Electrical contacts with high conductivity High insulation and mechanical properties
Receptacle : 2-Pole+1E Metal parts are protected against corrosion
Electrical contacts with high conductivity
Electrical Receptacle : 2-Pole+1E
AC250V, 16A
Electrical
AC250V, 15A
Non-Watertight Receptacle

Non-Watertight Receptacle
Technical Drawing Technical Drawing

Specification Specification
Model No. Capacity L(mm) W(mm) H(mm) Weight(Kg) Remarks Model No. Capacity L(mm) W(mm) H(mm) Weight(Kg) Remarks
RT-FQ2DF 250V/16A 84 95 69 0.5 RT-SQ1JL 127V/15A 83.5 83.5 51 0.2 Single surface

www.daeyang.co.kr 148 www.daeyang.co.kr 149

 Lighting for marine use 2010-2011 Lighting for marine use 2010-2011

RT-SQ2JL Receptacle Double Surface, JIS Type IP20 RT-FQ1JL Receptacle Single Flush, JIS Type IP20
Application Application
Accommodation area Accommodation area

Protection degree IP20 Protection degree IP20

Materials Materials
Body : Urea resin Body & Cover : ABS
Cover : ABS (Acrylonitrile Butadiene Styrene)
(Acrylonitrile Butadiene Styrene)
RECEPTACLE & SWITCH

RECEPTACLE & SWITCH

Finish
Finish Polar white
Polar white
Equipment
Equipment High insulation and mechanical properties
High insulation and mechanical properties Metal parts are protected against corrosion
Metal parts are protected against corrosion Electrical contacts with high conductivity
Electrical contacts with high conductivity Receptacle : 2-Pole+1E
Receptacle : 2-Pole+1E
Electrical
Electrical AC127V, 15A
AC250V, 15A
Non-Watertight Receptacle

Non-Watertight Receptacle
Technical Drawing Technical Drawing

Specification Specification
Model No. Capacity L(mm) W(mm) H(mm) Weight(Kg) Remarks Model No. Capacity L(mm) W(mm) H(mm) Weight(Kg) Remarks
RT-SQ2JL 127V/15A 83.5 150.5 52 0.4 RT-FQ1JL 127V/15A 81 81 49 0.3

www.daeyang.co.kr 150 www.daeyang.co.kr 151

 Lighting for marine use 2010-2011 Lighting for marine use 2010-2011

RT-FQ2JL Receptacle Double Flush, JIS Type IP20 RT-FQ1S DC Receptacle Flush Mounting Type IP20
Application Application
Accommodation area Accommodation area
For daylight signalling light
Protection degree IP20
Protection degree IP20
Materials
Body & Cover : ABS Materials
(Acrylonitrile Butadiene Styrene) Body : Electro zine coated steel sheet
Cover : Stainless steel
RECEPTACLE & SWITCH

RECEPTACLE & SWITCH

Finish
Polar white Finish
Body : White epoxy powder coat and
Equipment stove enamelled(Munsell No.N 9.3)
High insulation and mechanical properties Cover : Natural
Metal parts are protected against corrosion
Electrical contacts with high conductivity Electrical
Receptacle : 2-Pole+1E DC 24V, 5A

Electrical
AC127V, 15A
Non-Watertight Receptacle

Non-Watertight Receptacle
Technical Drawing Technical Drawing

Specification Specification
Model No. Capacity L(mm) W(mm) H(mm) Weight(Kg) Remarks Model No. Capacity L(mm) W(mm) H(mm) Weight(Kg) Remarks
RT-FQ2JL 127V/15A 81 148.5 49 0.6 RT-FQ1S 24V/5A 150 85 48 0.4

www.daeyang.co.kr 152 www.daeyang.co.kr 153

 Lighting for marine use 2010-2011 Lighting for marine use 2010-2011

SI-SQ-N Tumbler Switch Surface IP20 SI-FQ-01 Tumbler Single Switch Flush IP20
Application Application
Accommodation area Accommodation area

Protection degree IP20 Protection degree IP20

Materials Materials
Body & Cover : ABS Body & Cover : ABS
(Acrylonitrile Butadiene Styrene) (Acrylonitrile Butadiene Styrene)
Contact : Copper alloy Contact : Copper alloy
RECEPTACLE & SWITCH

RECEPTACLE & SWITCH

Finish Finish
Polar white Body : Polar white

Equipment Equipment
High insulation and mechanical properties High insulation and mechanical properties
Metal parts are protected against corrosion Metal parts are protected against corrosion
Electrical contacts with high conductivity Electrical contacts with high conductivity
Switch 2-Pole Switch 2-Pole
1way or 3-ways : available
Electrical
Electrical AC250V, 16A
AC250V, 16A
Non-Watertight Switch

Non-Watertight Switch
Technical Drawing Technical Drawing

Specification Specification
Model No. Capacity L(mm) W(mm) H(mm) Weight(Kg) Remarks Model No. Capacity L(mm) W(mm) H(mm) Weight(Kg) Remarks
SI-SQ11D-N 250V/16A 84 84 31 0.3 1-way SI-FQ11D 250V/16A 84 84 48.5 0.4 1-way

SI-SQ13D-N 250V/16A 84 84 31 0.3 3-way SI-FQ13D 250V/16A 84 84 48.5 0.4 3-way

www.daeyang.co.kr 154 www.daeyang.co.kr 155

 Lighting for marine use 2010-2011 Lighting for marine use 2010-2011

SI-FQ-02 Tumbler Double Switch Flush IP20 S-16/2 VI Tumbler Switch Flush IP44
Application Application
Accommodation area Accommodation area

Protection degree IP20 Protection degree IP44

Materials Materials
Body & Cover : ABS Body & Cover : ABS
(Acrylonitrile Butadiene Styrene) (Acrylonitrile Butadiene Styrene)
Contact : Copper alloy Contact : Copper alloy
RECEPTACLE & SWITCH

RECEPTACLE & SWITCH

Finish Finish
Polar white Polar white

Equipment Equipment
High insulation and mechanical properties High insulation and mechanical properties
Metal parts are protected against corrosion Metal parts are protected against corrosion
Electrical contacts with high conductivity Electrical contacts with high conductivity

Electrical Electrical
AC250V, 16A AC250V, 16A
Non-Watertight Switch

Non-Watertight Switch
Technical Drawing Technical Drawing

Specification
Model No. Capacity L(mm) W(mm) H(mm) Weight(Kg) Remarks Specification
SI-FQ21D 250V/16A 155 84 48.5 0.8 Double pole Model No. Capacity L(mm) W(mm) H(mm) Weight(Kg) Remarks
SI-FQ23D 250V/16A 155 84 48.5 0.8 Double pole 3way S-16/2 VI 250V/16A 84 84 47 0.3 Two pole

www.daeyang.co.kr 156 www.daeyang.co.kr 157

 Lighting for marine use 2010-2011 Lighting for marine use 2010-2011

S-16/2 VP Tumbler Switch Surface IP55 SD-F-01 Dimmer Switch(Incandescent Light) IP20
Application Application
Accommodation area Accommodation area

Protection degree IP55 Protection degree IP20

Materials Materials
Body & Cover : ABS Body & Cover : ABS
(Acrylonitrile Butadiene Styrene) (Acrylonitrile Butadiene Styrene)
Contact : Copper alloy
RECEPTACLE & SWITCH

RECEPTACLE & SWITCH

Finish
Finish Polar white
Polar white
Equipment
Equipment High insulation and mechanical properties
High insulation and mechanical properties Metal parts are protected against corrosion
Metal parts are protected against corrosion Incandescent Light
Electrical contacts with high conductivity
Electrical
Electrical AC 250V, 300/500VA
AC250V, 16A
Non-Watertight Switch

Non-Watertight Switch
Technical Drawing Technical Drawing

Specification
Model No. Capacity L(mm) W(mm) H(mm) Weight(Kg) Remarks
SD-S30I 300VA 120 71 58 0.1 surface
Specification SD-F30I 300VA 120 71 58 0.1 flush

Model No. Capacity L(mm) W(mm) H(mm) Weight(Kg) Remarks SD-F50I 500VA 120 71 58 0.1 flush

S-16/2 VP 250V/16A 87 68 37 0.3 Two pole/3way SD-S50I 500VA 120 71 58 0.1 surface

www.daeyang.co.kr 158 www.daeyang.co.kr 159

 Lighting for marine use 2010-2011 Lighting for marine use 2010-2011

SD-F-02 Dimmer Switch(Fluorescent Light) IP20 PG-N Plug IP20

Application Application
Accommodation area Accommodation area

Protection degree IP20 Protection degree IP20

Materials Materials
Body & Cover : ABS Body & Cover : ABS
(Acrylonitrile Butadiene Styrene) (Acrylonitrile Butadiene Styrene)
Contact : Brass
RECEPTACLE & SWITCH

RECEPTACLE & SWITCH

Finish
Polar white Finish
PG-N3P : Natural
Equipment PG-N3PD : White
High insulation and mechanical properties
Metal parts are protected against corrosion Equipment
Fluorescent light High insulation and mechanical properties
Metal parts are protected against corrosion
Electrical Electrical contacts with high conductivity
AC230V, 1000VA
Electrical
AC 250V, 16A
Non-Watertight Switch

Non-Watertight Plug
Technical Drawing Technical Drawing

Specification
Specification Model No. Capacity L(mm) W(mm) H(mm) Weight(Kg) Remarks
Model No. Capacity L(mm) W(mm) H(mm) Weight(Kg) Remarks PG-N3P 250V/15A 40 40 54 0.04 JIS

SD-F100F 1KVA 80.5 80.5 48.5 0.2 flush PG-N3PD 250V/16A 37 37 69 0.04 DIN

www.daeyang.co.kr 160 www.daeyang.co.kr 161

 Lighting for marine use 2010-2011 Lighting for marine use 2010-2011

PG-4NB Non-Watertight DC Plug IP20 JBNF-Q4PN Junction Box IP20

Application Application
Accommodation area Accommodation area
For daylight signalling light
Protection degree IP20
Protection degree IP20
Materials
Materials Body : Phenol resin
Body : Cast brass Cover : Urea resin
RECEPTACLE & SWITCH

RECEPTACLE & SWITCH

Finish Finish
Body : Silver White

Electrical Equipment
DC 24V, 5A High insulation and mechanical properties
Metal parts are protected against corrosion
Electrical contacts on terminal block

Electrical
AC 800V, 24A
Non-Watertight Plug

Non-Watertight Junction box

Technical Drawing Technical Drawing

Specification Specification
Model No. Capacity L(mm) W(mm) H(mm) Weight(Kg) Remarks Model No. Capacity L(mm) W(mm) H(mm) Weight(Kg) Remarks
PG-4NB DC24V/5A 49.5 28 28 0.5 JBNF-Q4PN 800V/24A 81 114 48 0.3 4P

www.daeyang.co.kr 162 www.daeyang.co.kr 163

 Product List

Reefer Container Receptacle

REEFER CONTAINER RECEPTACLE

CR-14432 166 CR-24432 167

CR-34432 168 CR-44432 169

CR-54432 170 CR-64432 171

Monitoring Cable 172

Product List
REEFER
CONTAINER RECEPTACLE
www.daeyang.co.kr 165
 Lighting for marine use 2010-2011 Lighting for marine use 2010-2011

CR-14432 Receptacle with Switch IP67 CR-24432 Receptacle with Switch IP67
Description Description
REEFER CONTAINER RECEPTACLE

REEFER CONTAINER RECEPTACLE

• Gang : Container-socket system • Gang : Container-socket system
• Housing : Welded stainless steel • Housing : Welded stainless steel
construction construction
• Sealing : Highly flexible hollow seal • Sealing : Highly flexible hollow seal
for the cover and non-aging seal for for the cover and non-aging seal for
the socket flange the socket flange
• Mounting : External fixing lugs • Mounting : External fixing lugs
• Electrical protection : One circuit • Electrical protection : One circuit
breaker per power unit with thermal breaker per power unit with thermal
magnetic trip magnetic trip
• Type : 1 Gang • Type : 2 Gangs
• Socket : Integrated with brass socket • Socket : Integrated with brass socket
flange, with exchangeable socket flange, with exchangeable socket
insert, high quality lamella contacts, insert, high quality lamella contacts,
nylon bayonet cap nylon bayonet cap
• Connection terminals : Horizontally • Connection terminals : Horizontally
beside one with another beside one with another
• Cable glands : Welded to the housing • Cable glands : Welded to the housing
rotation rotation

Technical information Technical information

Plug-in module version Plug-in module version
With 4-pole monitoring socket With 4-pole monitoring socket
Technical Drawing Loop-through version Technical Drawing Loop-through version
With external special socket With external special socket
Nylon bayonet cap Nylon bayonet cap

Protection degree IP67 Protection degree IP67

Materials Materials
Body : Stainless steel Body : Stainless steel
Socket flange : Resin & Brass Socket flange : Resin & Brass

Finish Finish
Body : Light green epoxy powder coat Body : Light green epoxy powder coat
and stoveenamelled and stoveenamelled
(Munsell No. 7.5BG 7/2) (Munsell No. 7.5BG 7/2)
CEE power sockets and plugs CEE power sockets and plugs
Electrical Electrical
AC440V, 32A / 3-Pole+1E AC440V, 32A / 3-Pole+1E

Specification Option - U : Standard - MU : with Monitoring jack - PUMN : Power Communication Monitoring Unit Specification Option - U : Standard - MU : with Monitoring jack - PUMN : Power Communication Monitoring Unit

Model No. L(mm) W(mm) H(mm) D1(mm) D2(mm) Weight(Kg) Socket Model No. L(mm) W(mm) H(mm) D1(mm) D2(mm) Weight(Kg) Socket
CR-14432UR 274 320 168 187 400 12 CR-24432UR 385 320 168 325 400 15

CR-14432U 247 230 171 187 310 15 CR-24432U 361 230 171 291 310 22

www.daeyang.co.kr 166 www.daeyang.co.kr 167

 Lighting for marine use 2010-2011 Lighting for marine use 2010-2011

CR-34432 Receptacle with Switch IP67 CR-44432 Receptacle with Switch IP67
Description Description
REEFER CONTAINER RECEPTACLE

REEFER CONTAINER RECEPTACLE

• Gang : Container-socket system • Gang : Container-socket system
• Housing : Welded stainless steel • Housing : Welded stainless steel
construction construction
• Sealing : Highly flexible hollow seal • Sealing : Highly flexible hollow seal
for the cover and non-aging seal for for the cover and non-aging seal for
the socket flange the socket flange
• Mounting : External fixing lugs • Mounting : External fixing lugs
• Electrical protection : One circuit • Electrical protection : One circuit
breaker per power unit with thermal breaker per power unit with thermal
magnetic trip magnetic trip
• Type : 3 Gangs • Type : 4 Gangs
• Socket : Integrated with brass socket • Socket : Integrated with brass socket
flange, with exchangeable socket flange, with exchangeable socket
insert, high quality lamella contacts, insert, high quality lamella contacts,
nylon bayonet cap nylon bayonet cap
• Connection terminals : Horizontally • Connection terminals : Horizontally
beside one with another beside one with another
• Cable glands : Welded to the housing • Cable glands : Welded to the housing
rotation rotation

Technical information Technical information

Plug-in module version Plug-in module version
With 4-pole monitoring socket With 4-pole monitoring socket
Technical Drawing Loop-through version Technical Drawing Loop-through version
With external special socket With external special socket
Nylon bayonet cap Nylon bayonet cap

Protection degree IP67 Protection degree IP67

Materials Materials
Body : Stainless steel Body : Stainless steel
Socket flange : Resin & Brass Socket flange : Resin & Brass

Finish Finish
Body : Light green epoxy powder coat Body : Light green epoxy powder coat
and stoveenamelled and stoveenamelled
(Munsell No. 7.5BG 7/2) (Munsell No. 7.5BG 7/2)
CEE power sockets and plugs CEE power sockets and plugs
Electrical Electrical
AC440V, 32A / 3-Pole+1E AC440V, 32A / 3-Pole+1E

Specification Option - U : Standard - MU : with Monitoring jack - PUMN : Power Communication Monitoring Unit Specification Option - U : Standard - MU : with Monitoring jack - PUMN : Power Communication Monitoring Unit

Model No. L(mm) W(mm) H(mm) D1(mm) D2(mm) Weight(Kg) Socket Model No. L(mm) W(mm) H(mm) D1(mm) D2(mm) Weight(Kg) Socket
CR-34432UR 523 320 168 463 400 20 CR-44432UR 660 320 168 600 400 25

CR-34432U 500 230 171 440 310 30 CR-44432U 646 230 171 589 310 38

www.daeyang.co.kr 168 www.daeyang.co.kr 169

 Lighting for marine use 2010-2011 Lighting for marine use 2010-2011

CR-54432 Receptacle with Switch IP67 CR-64432 Receptacle with Switch IP67
Description Description
REEFER CONTAINER RECEPTACLE

REEFER CONTAINER RECEPTACLE

• Gang : Container-socket system • Gang : Container-socket system
• Housing : Welded stainless steel • Housing : Welded stainless steel
construction construction
• Sealing : Highly flexible hollow seal • Sealing : Highly flexible hollow seal
for the cover and non-aging seal for for the cover and non-aging seal for
the socket flange the socket flange
• Mounting : External fixing lugs • Mounting : External fixing lugs
• Electrical protection : One circuit • Electrical protection : One circuit
breaker per power unit with thermal breaker per power unit with thermal
magnetic trip magnetic trip
• Type : 5 Gangs • Type : 6 Gangs
• Socket : Integrated with brass socket • Socket : Integrated with brass socket
flange, with exchangeable socket flange, with exchangeable socket
insert, high quality lamella contacts, insert, high quality lamella contacts,
nylon bayonet cap nylon bayonet cap
• Connection terminals : Horizontally • Connection terminals : Horizontally
beside one with another beside one with another
• Cable glands : Welded to the housing • Cable glands : Welded to the housing
rotation rotation

Technical information Technical information

Plug-in module version Plug-in module version
With 4-pole monitoring socket With 4-pole monitoring socket
Technical Drawing Loop-through version Technical Drawing Loop-through version
With external special socket With external special socket
Nylon bayonet cap Nylon bayonet cap

Protection degree IP67 Protection degree IP67

Materials Materials
Body : Stainless steel Body : Stainless steel
Socket flange : Resin & Brass Socket flange : Resin & Brass

Finish Finish
Body : Light green epoxy powder coat Body : Light green epoxy powder coat
and stoveenamelled and stoveenamelled
(Munsell No. 7.5BG 7/2) (Munsell No. 7.5BG 7/2)
CEE power sockets and plugs CEE power sockets and plugs
Electrical Electrical
AC440V, 32A / 3-Pole+1E AC440V, 32A / 3-Pole+1E

Specification Option - U : Standard - MU : with Monitoring jack - PUMN : Power Communication Monitoring Unit Specification Option - U : Standard - MU : with Monitoring jack - PUMN : Power Communication Monitoring Unit

Model No. L(mm) W(mm) H(mm) D1(mm) D2(mm) Weight(Kg) Socket Model No. L(mm) W(mm) H(mm) D1(mm) D2(mm) Weight(Kg) Socket
CR-54432UR 797 320 168 737 400 30 CR-64432UR 957 320 168 897 400 34

CR-54432U 782 230 171 518 310 46 CR-64432U 946 230 171 682 310 54

www.daeyang.co.kr 170 www.daeyang.co.kr 171

 Lighting for marine use 2010-2011

Monitoring Cable NEW PRODUCT & LED

Application
REEFER CONTAINER RECEPTACLE

Monitoring for reefer container

Features
15M cable

www.daeyang.co.kr 172 www.daeyang.co.kr 173

 Lighting for marine use 2010-2011

Product List
Explosion Proof H.P sodium flood light IP67
Hazardous Flood light
Application
Explosion Proof H.P sodium flood light 175
Hazardous areas where cargo hold
Installations where moisture, dirt, dust,
vibration, corrosion, and rough usage exist

Protection degree IP67

Explosion protection : Exde IIC T3 (400W)
Exde IIC T4 (250W)
Standard : IEC 60079-0/1/7
LED Accommodation deco light
Materials
NEW PRODUCT & LED

NEW PRODUCT & LED

176 177 Body : Diecasting aluminium
Glass : Hard and impact resistant glass

Finish
Body : Epoxy powder coat and stove
enamelled
178 179
Equipment
H.P Sodium Lamp : 250/400W
Lamp base : E40
Cable glands : NPT 1/2” and NPT 3/4”

181 Electrical
180
AC 220~240V, 50/60Hz are available
on request

Hazardous Flood light

Product List

182 183
Technical Drawing Light Distribution Curve [Cd / 1000lm]

120° 120°
150

184 185
90° 90°

150

60° 300 60°

450

600
30° 30°

Specification
Model No. Capacity L(mm) W(mm) H(mm) D1(mm) D2(mm) Weight(Kg) Remark
PF-25SBX2 250W 498 288 497 110 110 26 Sodium/Exde IIC T4

PF-40SBX2 400W 498 288 497 110 110 27 Sodium/Exde IIC T3

www.daeyang.co.kr 174 www.daeyang.co.kr 175

 Lighting for marine use 2010-2011 Lighting for marine use 2010-2011

LED down light-square IP20 LED down light-basic IP20

Application Application
accommodation area, corridor, accommodation area, corridor,
bedroom, toilet bedroom, toilet

Protection degree IP20 Protection degree IP20

Materials Materials
Body : aluminium Body : aluminium

Finish Finish
anodizing anodizing
NEW PRODUCT & LED

NEW PRODUCT & LED

Equipment Equipment
1W X 4 LEDs 1W X 3 LEDs

Electrical Electrical
AC 220V, 50/60Hz AC 220V, 50/60Hz

LED Accommodation deco light

LED Accommodation deco light

Technical Drawing Light Distribution Curve [Cd / 1000lm] Technical Drawing Light Distribution Curve [Cd / 1000lm]

120° 120° 120° 120°

10 20

90° 90° 90° 90°

10 20

60° 20 60° 60° 40 60°

30 60

40 80
30° 30° 30° 30°

Specification Specification
Model No. Capacity L(mm) W(mm) H(mm) Remarks Model No. Capacity L(mm) W(mm) H(mm) Remarks
LED down light-square 4W 132 132 24 LED down light-basic 3W 81.5 81.5 41.5

www.daeyang.co.kr 176 www.daeyang.co.kr 177

 Lighting for marine use 2010-2011 Lighting for marine use 2010-2011

LED down light-duo IP20 LED down light-rectangle IP20

Application Application
accommodation area, corridor, accommodation area, corridor,
bedroom, toilet bedroom, toilet

Protection degree IP20 Protection degree IP20

Materials Materials
Body : aluminium Body : aluminium

Finish Finish
anodizing anodizing
NEW PRODUCT & LED

NEW PRODUCT & LED

Equipment Equipment
1W X 2 LEDs 1W X 2 LEDs

Electrical Electrical
AC 220V, 50/60Hz AC 220V, 50/60Hz

LED Accommodation deco light

LED Accommodation deco light

Technical Drawing Light Distribution Curve [Cd / 1000lm] Technical Drawing Light Distribution Curve [Cd / 1000lm]

120° 120° 120° 120°

10 10

90° 90° 90° 90°

10 10

60° 30 60° 60° 30 60°

50 50

70 70
30° 30° 30° 30°

Specification Specification
Model No. Capacity L(mm) W(mm) H(mm) Remarks Model No. Capacity L(mm) W(mm) H(mm) Remarks
LED down light-duo 2W 132 69 24 LED down light-rectangle 2W 132 69 24

www.daeyang.co.kr 178 www.daeyang.co.kr 179

 Lighting for marine use 2010-2011 Lighting for marine use 2010-2011

LED down light adjustable IP20 Down light-R IP20

Application Application
accommodation area, corridor, accommodation area, corridor,
bedroom, toilet bedroom, toilet

Protection degree IP20 Protection degree IP20

Materials Materials
Body : aluminium & steel sheet Body : aluminium
Ring : Acryl
Finish
anodizing Finish
NEW PRODUCT & LED

NEW PRODUCT & LED

Body : anodizing
Equipment Ring : color printing
2W X 1 LED
Equipment
Electrical 4 LED
AC 220V, 50/60Hz
Electrical
DC 12V, 350mA

LED Accommodation deco light

LED Accommodation deco light

Technical Drawing Light Distribution Curve [Cd / 1000lm] Technical Drawing Light Distribution Curve [Cd / 1000lm]

120° 120° 120° 120°

40 20

90° 90° 90° 90°

40 20

60° 60 60° 60° 40 60°

80 80

100 100
30° 30° 30° 30°

Specification Specification
Model No. Capacity L(mm) W(mm) H(mm) Remarks Model No. Capacity L(mm) W(mm) H(mm) Remarks
LED Down light adjustable 2W 98 98 55 Down light-R 4W 150 150 30.5

www.daeyang.co.kr 180 www.daeyang.co.kr 181

 Lighting for marine use 2010-2011 Lighting for marine use 2010-2011

Down light-CR IP20 Down light-CR IP20

Application Application
accommodation area, corridor, accommodation area, corridor,
bedroom, toilet bedroom, toilet
indirect lighting indirect lighting

Protection degree IP20 Protection degree IP20

Materials Materials
Body : aluminium Body : aluminium
Cup : Acryl
Finish
NEW PRODUCT & LED

NEW PRODUCT & LED

Finish anodizing / color painting
Body : anodizing
Cup : polishing painting Equipment
8 LEDs
Equipment
4 LEDs Electrical
Power consumption : max. 16W
Electrical Driving current : 500mA DC
DC 12V/350mA

LED Accommodation deco light

LED Accommodation deco light

Technical Drawing Light Distribution Curve [Cd / 1000lm] Technical Drawing Light Distribution Curve [Cd / 1000lm]

120° 120° 120° 120°

20 100

90° 90° 90° 90°

20 100

60° 40 60° 60° 200 60°

80 300

100 400
30° 30° 30° 30°

Specification Specification
Model No. Capacity L(mm) W(mm) H(mm) Remarks Model No. Capacity L(mm) W(mm) H(mm) Remarks
Down light-CR 4W 160 160 72 Down light-CR 16W 120 120 20.5

www.daeyang.co.kr 182 www.daeyang.co.kr 183

 Lighting for marine use 2010-2011 Lighting for marine use 2010-2011

Wall light-2A IP20 Wall light-IS IP20

Application Application
accommodation area, corridor, accommodation area, corridor,
bedroom, toilet bedroom, toilet
indirect lighting indirect lighting

Protection degree IP20 Protection degree IP20

Materials Materials
Body : Acryl/aluminium Body : Brass
Diffuser : acryl Diffuser : Opal acryl
NEW PRODUCT & LED

NEW PRODUCT & LED

Finish Finish
Body : anodizing Silcer color coated
Diffuser : polish
Equipment
Equipment LED(3x3)
LED(3x10)
Electrical
Electrical DC 12V/250mA
DC 12V/250mA

LED Accommodation deco light

LED Accommodation deco light

Technical Drawing Light Distribution Curve [Cd / 1000lm] Technical Drawing Light Distribution Curve [Cd / 1000lm]

120° 120° 120° 120°

10 4

90° 90° 90° 90°

10 4

60° 20 60° 60° 8 60°

30 12

40 16
30° 30° 30° 30°

Specification Specification
Model No. Capacity L(mm) W(mm) H(mm) Remarks Model No. Capacity L(mm) W(mm) H(mm) Remarks
Wall light-2A 8W 250 80 49 Wall light-IS 4W 240 40 100

www.daeyang.co.kr 184 www.daeyang.co.kr 185

 Worldwide Sales Network
Worldwide Service Network

Worldwide Sales Network

Contry Company / Location Telephone Fax Contry Company / Location Telephone Fax
Australia E.J ElECTRICAL ENGINEERING CONTRACTORS Tel. 61-8-9437-1300 Fax. 61-8-9437-1311 India 602, Rajhans, Opp. Gaon Devi bus Depot, Naupada, Thane(W), Mumbai-
17 Sparks Rd, Henderson, W.A. 6166 400 602, Maharshtra, India

Brazil SY MARINE CO.,LTD Tel. 55-21-0518~5562 Fax. 55-21-2518~5587 Japan OSAKA OFFICE Tel. 81-6-6615-5701 Fax. 81-6-6615-5702
ATC-ITM4F, 2-1-10, Nanko-Kita, Suminoe-Ku, Osaka, 559-0034, Japan
Rua Vlsconde de Inhauma, 58-Sala 1303
MEIYO ELECTRIC CO.,LTD Tel. 81-543-45-2211 Fax. 81-543-45-2215
Croatia CURIC ELEKTRO CENTAR d.o.o Tel. 385-21-204-333 Fax. 385-21-204-343
No.485, Nanatsushinya Shinmizu, Shizuoka-Ken, 424, Japan
HR-21210 Solin Hektoroviceva 31
UZUSHIO ELECTRIC CO.,LTD Tel. 81-898-53-6361 Fax. 81-898-53-5384
China L&D INTERNATIONAL CO.,LTD Tel. 86-411-8273-7315 Fax. 86-411-8273-4028
1520, Onishi-cho, Ochi-gun, Ehime-ken, Japan
A2401, ANDA Mansion 74 Lunxun Road, Zhongshan Dist, Dalian, China
KYOKUYO ELECTRIC CO., LTD. Tel. 81-6-6581-5814 Fax. 81-6-6584-0566
SHANGHAI KNOW-HOW MARINE EQUIPMENT LTD. Tel. 86-21-6443-9428 Fax. 86-21-6416-6108
1-19, Chiyosaki 1-chome, Nishi-ku, Osaka, 550-0023 Japan
5D, Yi Yuan, Shining Garden, No.393 Zhao Jia Bang Road, Shanghai, China
KYOKUYO ELECTRIC CO., LTD. Tel. 81-3-5652-1701 Fax. 81-3-5652-1702
TOP SYSTEM GROUP LTD. Tel. 86-20-8238-4364 Fax. 86-20-8237-5520
1-5-703, Koami-cho, Chuo-ku, Tokyo, 103-0016 Japan
Guangzhou Office - Rm.502, 5/F, City Garden of Vanke,
No.197 Shi Hua Lu, Guangzhou, China Singapore ZIRCON ENG Tel. 65-6288-8889 Fax. 65-6283-8889

TOP SYSTEM GROUP LTD. Tel. 852-2110-3903 Fax. 852-2626-9683 ZIRCON ENGINEERING Pte. Ltd.107, Defu Lane 10, Fullion Bldg

Hong Kong Office - Rm.3602, 36/F, China Merchants Tower, Shun Tak Turkey BETEX Tel. 90-216-446-2315 Fax. 90-216-446-2316
Centre, 168-200 Connaught Road Central, Hong Kong Rauforbay Cd, No.19, Kat: 2 Tuzla Istanbul, Turkey
HANS BELL EQUIPMENT LTD. Tel. 86-591-8727-5739 Fax. 86-591-8727-5759 U.K LEADERS INTERNATIONAL Tel. 44-208-686-8400 Fax. 44-208-686-8400
Rm.902, Seven Sea Building, Yingji Road, Fuzhou, China 2. Lytchgate Close, South Croydon Surrey, U.K, Cr2 Odx.
India PENTA ELECTROMEC Tel. 91-22-2537-8734 Fax. 91-22-2537-8734 USA KIMPEX.INC Tel. 1-847-397-0800 Fax. 1-847-397-0400
2309 Hammoud Drive Schaumburg, IL 60173, U.S.A

www.daeyang.co.kr 186 www.daeyang.co.kr 187

 Worldwide Service Network Daeyang Address
Daeyang Electric
National Company Website
HEAD OFFICE
A~G Argentina TURBOGEN www.turbogen.com 503, Sinpyeong-dong Saha-gu, Busan, Korea.
Tel +82-51-200-5212, 5221, 5291, 5294, 5281
Australia READ’S ELECTRIC CO. PTY. LTD www.readselectric.com Fax +82-51-200-5210

Belgium MAINTENANCE PARTNERS NV www.maintenancepartners.com SEOUL OFFICE

MAN DIESEL BENELUX NV www.manrollo.com
4F Subon Bldg, 112-19, Samseong-dong,
ASTRON NV
Gangnam-gu, Seoul, Korea.
Brazil METALOCK BRASIL www.metalock.com.br
Tel +82-2-715-3492~3
Fax +82-2-715-3495
Canada CMC ELECTRONICS. AN ESTERLINE COMPANY www.cmcelectronics.ca
TRAHAN & MERCILLE ELECTRIC www.trahanmercille.com
R&D CENTER
Chile MAESTRANZA DIESEL LTDA www.md.cl
502, Sinpyeong-dong Saha-gu, Busan, Korea.
Tel +82-51-200-9549, 9560, 9558, 9534, 9529
Denmark METALOCK DENMARK A/S www.metalock.dk
Fax +82-51-200-9544

France NAVELEC www.navelec.fr

Germany KARLE & FUHRMANN www.karle-fuhrmann.de

Affiliated Companies
Gibraltar AAGE HEMPEL www.aagehempel.com DAEYANG INSTRUMENT Co.,LTD
502, Sinpyeong-dong Saha-gu, Busan, Korea.
Greece NOVA ELECTRONICS SA www.novaelectronics.gr Tel +82-51-200-5212, 5221, 5291, 5294, 5281
Fax +82-51-200-5210
I~N India FAVOURITE MARINE SERVICES www.favouritemarine.com

DAEYANG ELECTRIC SUPPLY Co.,LTD

Italy SOTECO INTERNATIONAL SRL www.sotecogroup.com 317-2, Gupyeong-dong, Saha-gu, Busan, Korea
PIAGGIO & FIGLI SRL
Tel. 82-51-414-9937~9
Japan JRCS CORPORATION www.jrcs.co.jp Fax 82-51-414-9940
BEMAC UZUSHIO ELECTRIC CO LTD. www.gti-group.com/mo
TERASAKI ELECTRIC CO. LTD. www.turboned.nl

Netherlands ALPHATRON MARINE B.V www.alphatronmarine.com

GTI MARINE & OFFSHORE www.gti-group.com/mo
TURBONED SERVICE B.V www.turboned.nl

Nigeria RADIAL CIRCLE TELECOMMUNICATIONS LTD www.radialcircle.com

O~Z Spain ALCONZA BERANGO. S.L. www.alconza.com

AAGE HEMPEL www.aagehempel.com
CROSSCOMAR S.L. www.crosscomar.com

Sweden BOATNAV AB www.boatnav.se

UAE ELCOME INTERNATIONAL L.L.C www.elcome.ae

TURBONED MID EAST FZC www.tnme.com

U.K SELEX COMMUNICATIONS (MARINE DIVISION) www.selexmarine.com

WHITELEGG MACHINES LTD. www.whitelegg.com
WYKO AN ERIKS COMPANY www.wyko.co.uk/marine
SKF (UK) Limited www.skf.co.uk

USA B&A MARINE CO INC www.bamarine.com

DUTHIE POWER SERVICES INC. www.duthiepower.com
KOFFLER ELECTRICAL MECHANICAL APPARATUS REPAIR www.koffler.com

www.daeyang.co.kr
MACKAY MARINE. INC www.mackaymarine.com
SEABOARD CONTROLS. INC www.seaboardcontrols.com

www.daeyang.co.kr 188 www.daeyang.co.kr 189