Scribd
Upload
9K views1 page

High Performance CG Drive SG Series

The CG Drive SG series is a high performance AC drive designed to provide optimal performance for applications requiring high torque at low frequencies or during starts. It offers simple programming and control via standard keypad or PC software. Power ranges from 5.5kW to 200kW at voltages from 200V to 480V and frequencies up to 500Hz. Control modes include V/F and closed loop sensorless vector control.

Uploaded by

manchem sreeram sanjay
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
9K views1 page

High Performance CG Drive SG Series

The CG Drive SG series is a high performance AC drive designed to provide optimal performance for applications requiring high torque at low frequencies or during starts. It offers simple programming and control via standard keypad or PC software. Power ranges from 5.5kW to 200kW at voltages from 200V to 480V and frequencies up to 500Hz. Control modes include V/F and closed loop sensorless vector control.

Uploaded by

manchem sreeram sanjay
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 1

CG Drive SG Series

High Performance AC Drive


CG Drive SG inverter series has been designed to satisfy the typical needs of modern
control systems, where innovative technical solutions and high performance are
essential. Especially developed to provide the best performance in applications where
high torque is required at the start or at low frequencies. A simple programming
structure, guarantees a quick motor “Start-up” or more complex systems regulation,
either through the simple to use standard keypad or using the E@syDrives PC tool.

Power Range
5.5kW - 200kW 230V -15%...480V +10% 50/60Hz ±

Type of Control
V/f, Sensorless Vector control (Closed loop control system with
encoder feedback).

Overload capacity
150% for 60s

Switching Frequency
Upto 37kW -8kHz/16kHz
Upto 160kW - 4kHz/8kHz
200kW - 4kHz

Model No. Power kW Output Frequency


500Hz

Braking Module
3 Phase 200V 400 V Integrated up to 55kW, optional above 55kW.

• CGG-2055-KBX-4 3 5.5 Enclosure


• CGG-2075-KBX-4 4 7.5 IP 20
• CGG-3110-KBX-4 5.5 11 Input /Output controls
• CGG-3150-KBX-4 7.5 15 3 Differential Analog inputs.
3 Analog Outputs.
• CGG-4185-KBX-4 9 18.5 8 Digital Inputs.
• CGG-4220-KBX-4 11 22 4 Digital Outputs(2 Static & 2 Dynamic).
• CGG-4300-KBX-4 15 30 General Characteristics
• CGG-4370-KBX-4 18.5 37 • Motor Parameter self tuning.
• Programmable & Predefined V/F Curves.
• CGG-5450-KBX-4 22 45 • 4 Independent Programmable ramps.
• CGG-5550-KBX-4 30 55 • Programmable Auto restart.
• Auto capture function - Flying Restart.
• CGG-6750-KBX-4 37 75 • Mains loss detection with controlled stop.
• CGG-7900-KBX-4 45 90 • PID application block.
• Skip frequencies.
• CGG-71100-KBX-4 55 110 • Energy saving function.
• CGG-71320-KBX-4 75 132 • Motor thermal protection.
• RS485 Serial port -Modbus RTU Protocol as standard.
• CGG-81600-KBX-4 90 160
• CGG-82000-KBX-4 100 200 Optional Module:
• Programmable multilanguage keypad.
• I/O Expansion cards.
• Encoder feedback interface.
• Profibus interface card.
• Memory Key.
• Dedicated EMC filters.(In compliance with CEE-EN61800-3:2004 European
directive.
• Braking Resistors (Standard for the whole line).
• Input & Output Chokes.
• NEMA 1 type kit.
• Programming remote keypad kit.

You might also like