Scribd
Upload
535 views2 pages

Saudi Aramco Pre-Commissioning Form: Instrument and Control Cables

This document is a pre-commissioning form for instrument and control cables at a Saudi Aramco plant. It documents the testing and results of continuity, insulation resistance, and megger testing on two cables, J12-PT-1022A and J12-PT-1035A. Both cables passed with insulation resistances above 550 megohms for all wire pairs. The test equipment used is also documented, including the serial number, manufacturer, and calibration date. Signatures from four approval groups are required at the bottom.

Uploaded by

zahid1078
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as XLSX, PDF, TXT or read online on Scribd
535 views2 pages

Saudi Aramco Pre-Commissioning Form: Instrument and Control Cables

This document is a pre-commissioning form for instrument and control cables at a Saudi Aramco plant. It documents the testing and results of continuity, insulation resistance, and megger testing on two cables, J12-PT-1022A and J12-PT-1035A. Both cables passed with insulation resistances above 550 megohms for all wire pairs. The test equipment used is also documented, including the serial number, manufacturer, and calibration date. Signatures from four approval groups are required at the bottom.

Uploaded by

zahid1078
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as XLSX, PDF, TXT or read online on Scribd
You are on page 1/ 2

FORM # J-015 (6/17)

SAUDI ARAMCO PRE-COMMISSIONING FORM


INSTRUMENT AND CONTROL CABLES
EQUIPMENT TYPE: USER REFERENCE: QMIS#
EQUIPMENT TAG NO: J12-G-0116A DESCRIPTION: CONTINUITY & IR TEST
BI/JO NO: 10-01055-0012 PLANT NO. / LOCATION: J12 - AROMATICS
REF. DRAWINGS & DOCUMENTS:
MANUFACTURER:
MODEL NO.: N/A SERIAL NO.: N/A
COMMISSIONING DATE:

CABLE TAG NO.: SEE BELOW CABLE GLANDING: ok


CABLE TYPE : XLPE CABLE SEALING: N/A
CABLE SIZE : CABLE ROUTING: J12-FFJB-2913
CABLE MARKING: TYPE PLTC - INST
1P 18AWG
MEGGERING SWA

Insulation
PAIR/ CORE TO CORE TO CORE SHIELD Resistance
CABLE TAG NO. CORE TO CORE RESULT VALUE RESULT
TRIAD SHIELD) ARMOR (MΩ) CONTINUITY CONTINUITY Between OS &
ARMOR (MΩ)

J12-PT-1022A 1 PAIR BLK WHT >550 >550 >550 ok ok >550 PASS


J12-PT-1035A 1 PAIR BLK WHT >550 >550 >550 ok ok >550 PASS
1 PAIR BLK WHT >550 >550 >550 ok ok >550 PASS
1 PAIR BLK WHT >550 >550 >550 ok ok >550 PASS
1 PAIR BLK WHT >550 >550 >550 ok ok >550 PASS
1 PAIR BLK WHT >550 >550 >550 ok ok >550 PASS
1 PAIR BLK WHT >550 >550 >550 ok ok >550 PASS

FOR THE TEST EQUIPMENT USED, PLEASE ENTER THE FOLLOWING:


EQUIPMENT S/N : 3500028
EQUIPMENT NAME:
EQUIPMENT NAME: INSULATION TESTER
MANUFACTURER: FLUKE
CALIBRATION DUE DATE: 19-JULY-2018
REMARKS: Applied voltage 500 VDC….

NOTE: This non-mandatory form may be used as the starting point to assemble a pre-commissioning checklist. Entries should be revised, added and
deleted and approvals adjusted to reflect the needs of the Project Acceptance Committee.

DEC / JGC SAPMT JAPID OPERATIONS

APPROVALS
Signature & Date Md Mutiur Rehman Mr. RALLA NOVIE Mr. WASIM ANWER
FORM # J-015 (6/17)

SAUDI ARAMCO PRE-COMMISSIONING FORM


INSTRUMENT AND CONTROL CABLES
EQUIPMENT TYPE: USER REFERENCE: QMIS#
EQUIPMENT TAG NO: DESCRIPTION: CONTINUITY & IR TEST
BI/JO NO: 10-01055-0012 PLANT NO. / LOCATION: J12 - AROMATICS
REF. DRAWINGS & DOCUMENTS:
MANUFACTURER:
MODEL NO.: N/A SERIAL NO.: N/A
COMMISSIONING DATE:

CABLE TAG NO.: CABLE GLANDING:


CABLE TYPE : CABLE SEALING:
CABLE SIZE : CABLE ROUTING:
CABLE MARKING:

MEGGERING

Insulation
PAIR/ CORE TO CORE TO CORE SHIELD Resistance
CABLE TAG NO. CORE TO CORE RESULT VALUE RESULT
TRIAD SHIELD) ARMOR (MΩ) CONTINUITY CONTINUITY Between OS &
ARMOR (MΩ)

FOR THE TEST EQUIPMENT USED, PLEASE ENTER THE FOLLOWING:


EQUIPMENT S/N :
EQUIPMENT NAME:
EQUIPMENT NAME:
MANUFACTURER:
CALIBRATION DUE DATE:
REMARKS: Applied voltage VDC….

NOTE: This non-mandatory form may be used as the starting point to assemble a pre-commissioning checklist. Entries should be revised, added and
deleted and approvals adjusted to reflect the needs of the Project Acceptance Committee.

DEC / JGC SAPMT JAPID OPERATIONS

APPROVALS
Signature & Date MD ZAHID RAFIQUE Mr. RALLA NOVIE Mr. WASIM ANWER

You might also like