STATE OF THE ART ELECTRONIK INC.

STATE OF THE ART ELECTRONIK INC. has been

producing the highest quality studio monitors
since 1981. Renowned for their accuracy and
dynamic range, STATE OF THE ART monitors are
in continuous professional use throughout the
CF 2000 STUDIO MONITOR world.

ULTRA SMOOTH, NOTCH FREE FREQUENCY RESPONSE

WIDE DISPERSION WITH MAXIMUM OFF-AXIS FLATNESS

EXTREMELY LOW DISTORTION

PHASE COMPENSATED ACTIVE CROSSOVER SYSTEM
ACOUSTIC OUTPUT OF 122dB SPL @ 1 METER

PEAK OUTPUT OF 127 dB SPL

ALL-CONE MONITOR

LOW DIFFRACTION CABINET DESIGN

INTERIOR BAFFLING MAXIMIZES RIGIDITY

43 - 1010 Polytek St. Ottawa, Ontario, Canada K1J 9J3 T: 613-745-2003 F: 613-745-9687 E: sota@sota.ca
SPECIFICATIONS CF 2000
FREQUENCY RESPONSE: on-axis (@ 2 m)
39Hz to 20 kHz ± 1.5 db, -3dB @ 30Hz

420 mm
LISTENING WINDOW : off-axis vertical
± 1 db of response on reference

530 mm
axis over 10 degree arc to 18 kHz

off axis horizontal

+1,-3 db of response on reference
axis over 30 degree arc to 15 kHz

DRIVE UNITS: Lo 2 x 380 mm (2 x 15 in.)

Lo-Mid 1 x 250 mm (1 x 10 in.) 420 mm 260 mm 420 mm
Hi-Mid 1 x 54 mm (1 x 2.1 in.)
Hi 1 x 28 mm (1 x 1.1 in.)

LOW FREQ. TUNING: 2 x 140 liter, 29 Hz Helmholtz

GROUP DELAY: 250 Hz to 20 kHz

< 500 microseconds

800 mm
DISTORTION: (96 db SPL @ 1m)
38 Hz to 20 kHz < 0.9% THD

SENSITIVITY : (2.83 VRMS @ 1m, Active system)

96 to 98 db SPL 39 Hz to 1.5 kHz
94 db SPL 1.5 kHz to 5.0 kHz
94 to 91 dB SPL 5.0 kHz to 14 kHz

IMPEDANCE: 4 Ohms low band

8 Ohms other bands
1100 mm
MAXIMUM OUTPUT: continuous program 10ms
@1m 39Hz to 16 kHz 119dB 122dB 127dB

ACTIVE CROSSOVER REQUIREMENT: One AAX2-4-2000 WEIGHT: 107kg./235 lbs.

AMPLIFIER REQUIREMENTS: Four stereo amplifiers required for a DIMENSIONS: 1100 (w) x 800 (h) x 530 (d) mm
stereo system. 43.3(w) x 31.5(h) x 20.9 (d) in.

POWER HANDLING: continuous program 10ms

Low Freq. driver (pair) 300w (4 Ohms) 600w 1200w
Low Mid driver 150w (8 Ohms) 300w 1000w STATE OF THE ART ELECTRONIK INC. reserves the right to
High Mid driver 50w (8 Ohms) 250w 1000w amend details of their specifications in line with technical
High Freq. driver 28w (8 Ohms) 250w 1000w developments.

MEASURED AT THE NATIONAL RESEARCH COUNCIL OF CANADA

100
SPL (dB @ 1 METRE, 2.83V INPUT)

ON-AXIS
90

15° HOR.

30° HOR.
80

20 50 100 200 500 1K 2K 5K 10K 20K

FREQUENCY (Hz)

STATE OF THE ART ELECTRONIK INC.

43 - 1010 Polytek St. Ottawa, Ontario, Canada K1J 9J3 T: 613-745-2003 F: 613-745-9687 E: sota@sota.ca